USB KVM Switch

SV221NANOU

Instruction Manual

2-Port Nano USB VGA Cable

KVM Switch - USB Powered

Manual Revision:10/18/2010

For the most up-to-date information, please visit www.startech.com

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and

Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.

com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Table of Contents

Introduction .............................................................. 1

Packaging Contents............................................................. 1

System Requirements ......................................................... 1

Installation ................................................................ 2

Hardware Installation ........................................................... 3

Driver Installation ................................................................. 3

How to Use ............................................................... 3

Hotkey Switching ................................................................. 3

Push Button Switching......................................................... 3

Specifications ........................................................... 4

Technical Support .................................................... 5

Warranty Information ............................................... 5 i

Introduction

The SV221NANOU 2-Port Nano USB VGA Cable KVM Switch lets you control two systems using a single USB keyboard, USB mouse and VGA monitor. A space-saving design helps to organize your desk without sacrificing control and convenience.

Featuring a push-button remote control on a 1.5 meter (5 ft.) cable that can be placed in an easily accessible location on your desk as well as keyboard hotkeys for switching between Windows ® systems, this KVM makes it easy to manage both of your connected computers. The KVM switch draws power from the USB connected systems, doing away with the need for a bulky external power adapter.

Offering support for extremely high resolutions of up to 2048x1536, this

KVM has the capability of driving large VGA displays with crystal clarity.

The SV221NANOU is perfect for streamlining the clutter on your desk and maximizing productivity by allowing you to switch back and forth between two computers quickly and easily.

Packaging Contents

• 1 x SV221NANOU KVM switch

• 1 x Instruction Manual

System Requirements

• VGA and USB enabled computer system

• VGA enabled display device (i.e. monitor, projector, HDTV, etc)

• A standard 104-key wired USB keyboard

• A standard 3-button wired USB mouse

1

Installation

2

Hardware Installation

1. Make sure that the two computers (PC1 and PC2) are located within

1.5m of each other. Both computers should be powered off.

2. Locate the end of the cable that has the female VGA connector and the Remote Control. Connect the male VGA and USB connector to the appropriate connectors on PC1.

3. Connect the male VGA and USB connector on the other end of the Nano

KVM to the appropriate connectors on PC2.

4. At the end with the female VGA connector, connect the VGA display device (i.e. monitor, projector, etc) using a standard male/male DE-15

VGA cable.

5. At the other end of the KVM cable are two female USB connectors. Plug the USB keyboard and mouse into these connectors.

6. Power on PC1 and confirm proper operation of the display and keyboard/mouse.

7. Press the button on the Remote Control to switch to port 2 and power on

PC2. Confirm proper operation of the display and keyboard/mouse.

Driver Installation

No drivers are required to be installed for the KVM switch to function.

How to Use

Hotkey Switching

Press the <Scroll Lock> key on the keyboard twice in quick succession to switch between ports. This feature only works from computers running

Windows.

Push Button Switching

Push the button on the Remote Control to immediately switch between ports on the KVM.

3

Specifications

Number of Ports

Computer Connectors

(per port)

2

1 x DE-15 VGA male

1 x USB type A male

Console Connectors

1 x DE-15 VGA female

2 x USB type A female

1 x Power LEDs

Maximum Video Resolution

DDC Support

Switching Methods

Power Adapter

Operating Temperature

Storage Temperature

Humidity

Integrated Cable Length

2048 x 1536

DDC, DDC2, DDC2B

Push Button, Hotkeys*

None (USB powered)

0°C ~ 40°C (32°F ~ 104°F)

-10°C ~ 80°C (14°F ~ 176°F)

0% ~ 90% RH

KVM Cable: 1.5m

Remote Control cable: 1.5m

Dimensions 33.0mm x 59.0mm x 12.0mm

Weight 210g

*hotkeys only supported under Microsoft ® Windows ® operating systems

4

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads.

Warranty Information

This product is backed by a one year warranty.

In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with equivalent products at our discretion.

The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.

com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

5

StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products,

KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the

United Kingdom and Taiwan.

Visit www.startech.com today for complete information about all our products and to access exclusive interactive tools such as the Cable Finder, Parts Finder and the KVM Reference Guide.