Adobe CS2 InDesign desktop publishing software Printing Guide
Reklama
Reklama
TABLE OF CONTENTS
3 Advancing productivity, consistency, and compatibility
15 Maintaining consistent color
22 Helping customers prepare InDesign files
39 Preparing InDesign documents for output
97 Streamlining output with print presets
112 Streamlining output with PDF presets
WHITEPAPER
Adobe InDesign CS2 Printing
Guide for Prepress Service
Providers
Introduction
Welcome to the Adobe® InDesign® CS2 Printing Guide for Print Service Providers.
You’ll find this document useful as both a detailed technical reference for handling
InDesign CS2 jobs from your customers, and as a training tool for your staff. This document is organized so that you can quickly find information about specific customer situations. You may also want to read the entire document to gain a comprehensive understanding of service-provider-related features in Adobe InDesign CS2.
Adobe InDesign is now well established and continues to advance as Adobe responds to the requirements of both designers and service providers. Designers value the product’s advanced design capabilities that expand creative freedom and streamline production workflows. When it’s time for final printed output, it is easier than ever for a customer to locate an Adobe InDesign prepress service provider. The widespread acceptance of
Adobe InDesign by prepress service providers results from a long and proven record of reliable, consistent prepress output and a deep set of tools specifically geared to identify and resolve prepress issues before output.
As with every previous generation of Adobe InDesign, Adobe InDesign CS2 incorporates requests from print professionals worldwide. This close and continuing collaboration with the print publishing community makes possible great advances in output efficiency and quality. Adobe InDesign CS2 includes substantial output workflow refinements based on service provider feedback, as well as support for new and emerging output workflows and standards.
Table of Contents
1 ADOBE INDESIGN CS2 PRINTING GUIDE FOR
3 ADVANCING PRODUCTIVITY, CONSISTENCY,
4 Manage and inspect entire projects with Adobe
6 Maintain visual consistency using object styles
7 Control visibility settings of imported layers
8 Place multiple pages from a PDF file
9 Include Adobe Stock Photos in documents
10 See more consistent color throughout
12 Impose publications with the ALAP InBooklet SE plug-in
12 Save documents backwards to
12 Output smoother drop shadows and feathered edges
13 Enjoy improved PDF compatibility with older RIPs
13 Manage and edit dictionaries more easily
14 Reuse page content using snippets
15 MAINTAINING CONSISTENT COLOR
16 Synchronizing color settings across
Adobe Creative Suite 2 components
19 Customizing a color settings file
20 Customizing black appearance for monitor display or printed comps
22 HELPING CUSTOMERS PREPARE INDESIGN FILES
22 Preparing customers for consistent color
23 Preparing documents that use Adobe Stock
23 Preparing documents that apply layer overrides to imported files
24 Using presets and settings files to further streamline customer handoffs
28 About InDesign icons and program versions
28 Managing customer dictionaries
33 Managing links and relinking imported files
36 Handling alerts about missing or mismatched color profiles
39 PREPARING INDESIGN DOCUMENTS FOR
41 Previewing the output area and printable items
41 Checking layer visibility overrides
44 Checking for differences if the file was converted from earlier versions of Adobe InDesign
44 Checking for differences if the file was converted from QuarkXPress or Adobe PageMaker
46 Merging raster-based Photoshop DCS and EPS files
54 Previewing separations, transparency, and overprints
57 Flattening transparency for high-resolution output
58 How flattening changes the document
58 Finding out how a document uses transparency
61 Understanding transparency flattener presets
64 Previewing transparency flattener presets
67 Applying transparency flattener presets
69 Printer Preset, Printer, and PPD menus
72 Setting up PostScript output paths
97 STREAMLINING OUTPUT WITH PRINT PRESETS
99 Distributing print presets throughout your shop
100 Applying your print presets to customer files
112 STREAMLINING OUTPUT WITH PDF PRESETS
112 About the predefined PDF export presets
113 Setting up PDF export presets
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
2
Advancing productivity, consistency, and compatibility
The modern printing architecture in Adobe InDesign CS2 is in its fourth generation, incorporating half a decade of refinement and optimization for optimum performance on the latest prepress output devices and operating systems. Specifically addressing the needs of prepress service providers, Adobe made sure that previous versions of InDesign included essential features such as preflight and package capability, and also introduced key service provider tools such as Separations Preview, Flattener Preview, the Ink Manager, and direct Adobe PDF output for high-end printing. These enhancements to high-end output all result from input from print professionals worldwide. With those existing capabilities now tried and tested in production environments, Adobe InDesign CS2 moves ahead to more advanced enhancements that can reduce costs and increase productivity in prepress environments. For example, the output workflow of a prepress service provider can now be significantly streamlined by the new safe CMYK workflow. This workflow enables CMYK images to move through the entire production process without any color changes, while at the same time enabling RGB images to be converted properly to CMYK. Safe CMYK is just one example of increased attention to color consistency across
Adobe Creative Suite 2.
Adobe InDesign CS2 is a primary component of Adobe Creative Suite 2, which includes
Adobe InDesign, Adobe Photoshop®, Adobe Illustrator®, Adobe GoLive®, and Adobe Acrobat®.
Even before the existence of the Adobe Creative Suite, designers routinely combined elements from Illustrator and Photoshop into their InDesign, GoLive, and Acrobat projects.
Adobe Creative Suite 2 further integrates these Adobe Creative Suite components, and both designers and service providers benefit from this effort. More skills and features learned in one Creative Suite component can be applied directly to the rest of the Adobe Creative Suite, and more key production-related files can be shared. For example, prepress service providers can now more easily standardize the production and output settings for their shop and their customers by distributing PDF presets and color consistency settings files that work with all
Adobe Creative Suite 2 applications and are stored in a single location. In addition, the new
Adobe Bridge component enables quick interchange, inspection, and management of project files created by Adobe Creative Suite 2 components and other applications.
Adobe remains committed to giving prepress service providers production and output capabilities that are an even match for the sophisticated layouts that designers can create in Adobe InDesign CS2. Similarly, Adobe InDesign CS2 is designed to successfully output advanced features used in files placed from Adobe Photoshop, Illustrator, and Acrobat software.
For example, designers can now use Adobe InDesign 2 to control the visibility of layers for some file formats; this feature is balanced on the production side by a new preflight feature that indicates when layer overrides are present, in order to minimize unexpected output at the service provider. A new ability to place multiple pages from a PDF file can accelerate PDF ad placement and manual imposition of PDF pages in Adobe InDesign CS2.
The following sections provide an overview of the improvements in Adobe InDesign CS2.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
3
Manage and inspect entire projects with Adobe Bridge
The new Adobe Bridge component lets you view and modify folder contents with much more flexibility than is currently available through your computer’s file system. Adobe
Bridge is included with Adobe Creative Suite 2 and also with the standalone version of
Adobe InDesign CS2.
A key feature of Adobe Bridge is the ability to inspect swatches, fonts, and metadata for an
Adobe InDesign CS2 document without having to open the document. Metadata is information that can be attached to each file that describes the file’s contents, and can be generated by applications or entered by hand. Adobe Creative Suite 2 components (including InDesign CS2) automatically embed certain types of metadata in their files. For example, the fonts and swatches used in an InDesign CS2 document are automatically listed in Adobe Bridge so that you don’t even have to open the document to discover this information—instead, simply take a brief glance at Adobe Bridge. You can also use Adobe Bridge to find files using metadata as search criteria, such as locating all documents that use the Myriad font. You can also use Adobe Bridge to manually tag InDesign CS2 and other Adobe Creative Suite 2 documents with metadata such as keywords.
Production staff and service providers can use Adobe Bridge to more easily inspect and track the publications and assets that are part of a job. Adobe Bridge is similar in concept to the
Adobe Photoshop CS File Browser, but works with all Adobe Creative Suite 2 documents.
NOTE:
All Adobe InDesign screen shots in this document were created with Mac OS® X. Adobe InDesign is compatible with Mac OS X 10.2.8 through 10.3.8,
Microsoft® Windows® 2000 with Service Pack 2, or
Windows XP®.
You can use Adobe Bridge to manage assets across the entire Adobe Creative Suite 2.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
4
The Adobe Bridge compact mode makes it easy to drag and drop assets into an InDesign CS2 layout. By default, the compact mode floats above your document windows.
The ultra-compact mode keeps Adobe Bridge handy, yet unobtrusive.
Designers can use the new Adobe Bridge application to quickly preview project assets and then drag them into Adobe InDesign CS2 layouts. They can drag Adobe InDesign objects from a layout to Adobe Bridge as snippets (InDesign objects as standalone files), and then drag them from Bridge to another InDesign layout. For more information, see “Reuse page content using snippets” on page 14.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
5
Maintain visual consistency using object styles
Designers are familiar with the paragraph and character styles in Adobe InDesign CS.
Adobe InDesign CS2 adds object styles, which are based on the same idea, but applied to graphics objects and text frames.
Object Styles palette
You can save a set of attributes, such as a studio’s standard drop shadow settings, under a style name in the Object Styles palette. You can then use the Object Styles palette to quickly apply the style to another object on the layout. Designers and production staff will naturally find great value in object styles, as they represent an easy way to ensure visual consistency at the object level. Because object styles can incorporate attributes such as object-level overprinting of fills and strokes, it’s also possible to use object styles as part of a prepress workflow. For more information about object styles, see the InDesign CS2 Help or User Guide.
Object Style Options dialog box
InDesign CS2 can import object styles from other InDesign CS2 documents so that they can be transferred and shared. For example, a service provider may decide to provide customers with an InDesign CS2 document or template that contains object styles defined with recommended attribute settings for certain color situations.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
6
Control visibility settings of imported layers
In Adobe InDesign CS2, you can control the visibility of layers in imported files, which opens new options for design and production. For example, a designer may prepare two variations of an ad using different layers or layer comps in Photoshop. For both versions to be used in a document in previous versions of Adobe InDesign (and in most other software), that Photoshop file would need to be duplicated, with different layer visibility settings in each file. Now it’s possible for an
Adobe InDesign CS2 document to make visible any combination of layers in a placed file, as long as it’s an Adobe Photoshop (PSD) or layered Portable Document Format (PDF) file. In addition, you can use Adobe InDesign to control the visibility of layer comps in placed Adobe Photoshop files. Regardless of how many different ways you want to display the layers in a placed file, you only need to create and maintain a single layered file.
Overriding layer visibility options lets the same file display in three different ways. In the Links palette, eye icons indicate which files use layer visibility overrides.
This new capability can reduce the size and number of files that need to be transported to and managed by a prepress service provider. However, it may also be necessary to adjust how customer files are handled. In particular, service providers and customers should clearly communicate how layered files are used in a job. If a customer uses a layered Photoshop file multiple times in a publication, and changes the layer visibility settings for different instances of the file in the publication, the original Photoshop file must never be flattened. A flattened file can represent only one state of layer visibility settings, not the multiple states used by the customer in this example.
Adobe InDesign CS2 makes it easy for prepress service providers and customers to evaluate a publication and determine whether flattening layered files is acceptable. Both the Links palette and the Adobe InDesign CS2 Preflight feature identify all layer overrides in a document. If preflighting reveals layer overrides in the document, the original layered source files must not be flattened.
For more information, see “Preparing documents that apply layer overrides to imported files“ on page 23.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
7
Place multiple pages from a PDF file
In Adobe InDesign CS2, you can place multiple pages from the same PDF file in one operation, by using the Range or All Pages options in the PDF Import Options dialog box.
This feature can be very useful for prepress service providers who do production work for their customers. A file containing many PDF ads can be imported and examined quickly, and each ad can then be placed into position on the correct page. Customer PDF files can be imposed by importing multiple pages and arranging and rotating them as needed. Each page places as an individual object, so any pages that aren’t needed can easily be deleted without affecting the other pages placed from the same document.
To see the multiple-page options, choose the File > Place command, select a multiple-page PDF document, and then select Show Import Options.
The All or Range options in the Place PDF dialog box enable the placing of multiple PDF pages at once.
All pages in a PDF document can be placed as a stack of new objects, by Option/Alt-clicking the Place icon.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
8
Include Adobe Stock Photos in documents
Stock photos are a popular alternative to dedicated photo shoots, thanks to their affordability combined with the wide availability of subject matter. To simplify the designer’s chore of locating, evaluating, and purchasing stock photos, Adobe Creative Suite now includes
Adobe Stock Photos, which customers can easily use in their Adobe InDesign CS2 and
Adobe Creative Suite 2 projects. Adobe has partnered with several large stock photo houses to provide the images that are downloadable for use with Adobe Creative Suite 2.
You can find and integrate stock photos into your layouts, directly from within Adobe Bridge.
Adobe Stock Photos is not just another stock photo service. Designers can search and shop for photos directly from Adobe Bridge. An Adobe Stock Photos image search saves time because designeres can search multiple content providers at once. Once photos are downloaded, Adobe
Bridge recognizes the photos and their built-in metadata. Designers can use Adobe Bridge to locate, identify, and organize the stock photos, and then drag them to an InDesign CS2 document window (or to any other component of Adobe Creative Suite 2). If designers need to evaluate images before deciding which one to purchase, they can download watermarked low-resolution comp versions of the images. They can then try out the comp versions as FPO
(for-position-only) images in their InDesign CS2 layouts. Adobe Stock Photos maintains a link between the comp version and the full-resolution version, so that when a final purchase decision is made, the full-resolution version can be downloaded without having to find it again.
Adobe Stock Photos are integrated into Adobe Creative Suite 2 in a way that makes them easier to output reliably, which benefits prepress workflows. In the process of downloading and experimenting with images from other stock photo services, a customer may unintentionally hand off a document that contains unused FPO images, or the customer may also forget to acquire a high-resolution version of the final images he or she wants to use. To prevent unwanted output,
Adobe InDesign CS2 can identify all Adobe Stock Photos that are comp images—images not suitable for high-resolution output. Comp images are marked with a special icon ( ) in the
Links palette, and are detected by the Preflight feature. The customer can then use Adobe Bridge to locate the missing high-resolution files to be passed on to the prepress service provider, or purchase them if necessary.
For more information about checking for comp photos in layouts, see “Managing links and relinking imported files” on page 33, and “Preflighting the document” on page 47.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
9
See more consistent color throughout Adobe Creative Suite 2
While advances in the last several years have eased the challenge of achieving consistent color,
Adobe recognizes that further improvement is possible and desired, and continues to work toward that goal. The enhancements to color consistency in Adobe Creative Suite 2 are in direct response to the following requests from designers and prepress service providers:
• Synchronize color settings across all Adobe Creative Suite 2 components in one step.
• Leave CMYK colors unchanged all the way to output.
• Share color settings and swatches across all Adobe Creative Suite 2 components, and with other users and workgroups.
• View different kinds of color more consistently on screen, such as black ink, spot colors, and
RGB colors.
• Understand color warnings more easily.
These improvements in Adobe Creative Suite 2 make consistent color easier for customers to achieve, while also making it easier for prepress service providers to distribute recommended color settings to customers.
Synchronize color settings across Adobe Creative Suite components
It’s no longer necessary to check each Adobe Creative Suite component to see if the color settings are the same. In Adobe Bridge, the Suite Color Settings dialog box indicates whether or not the current color settings are consistent with other Adobe Creative Suite 2 applications on the same computer. You can use the Adobe Bridge to synchronize color settings across applications in one step, which makes color consistency more accessible to customers. By default, only the most commonly used choices are available—advanced color workflows can be displayed as needed.
Synchronize color settings across all Adobe Creative Suite applications by using the Suite Color Settings dialog box in Adobe Bridge.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
10
Leave CMYK image colors unchanged all the way to final output
Before Adobe Creative Suite 2, it was often difficult to prevent unwanted color conversions when creating output from a document containing both CMYK objects and color-managed RGB objects. Adobe Creative Suite 2 now offers a safe CMYK workflow that also lets users take advantage of the benefits of color management, such as accurate hard and soft proofing.
In the Adobe safe CMYK workflow, RGB and CMYK objects are handled as two separate streams from the time you place files to the time you create final output. Color-managed conversions can now be applied to RGB images without causing any unwanted changes to carefully separated CMYK images. The safe CMYK workflow is supported by all of the built-in color settings that you can select in the Suite Color Settings dialog box in Adobe Bridge, which affects all
Adobe Creative Suite 2 products.
Share color settings and swatches across workgroups
The color settings in Adobe Creative Suite 2 are stored as files in one central folder that is read by all Adobe Creative Suite 2 components. By clicking the Show Saved Color Settings Files button in the Suite Color Settings dialog box in Adobe Bridge, you can see where the actual color settings files are stored, and then send them to other workstations or users such as your customers.
Customize black appearance for monitor display or printed comps
In Adobe InDesign CS2, you can choose to display or print black (100%K) as dark as possible (as
Rich Black), or to render it accurately relative to the output medium as in Adobe InDesign CS.
You can set this option separately for on-screen display and for printing and exporting to RGB or grayscale devices. Regardless of which option you choose, this setting does not affect color-separated CMYK output in any way—the Printing/Exporting option only affects devices typically used for comps.
Anticipate the future with open standards
Industry standards for achieving color consistency are built upon the open standards maintained by the International Color Consortium (ICC). To maintain compatibility with evolving industry standards, advances in color consistency in Adobe Creative Suite 2, such as the color settings files and profiles, are implemented in accordance with ICC standards. Because the new Adobe Creative Suite 2 color default settings represent a workflow that is now safe for both
CMYK and RGB color, CMYK numbers aren’t affected by having ICC color management turned on. To help ensure this new level of color consistency, color management is now on by default across Adobe Creative Suite 2 components.
For more information, see “Maintaining consistent color” on page 15.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
11
Share PDF job options
PDF job options can now be shared across all Adobe Creative Suite 2 components. For example, if you typically require customers to submit PDF files that conform to a specific set of PDF job options, you can send them a single job options file that can be used by any component of the
Adobe Creative Suite.
The Adobe PDF Presets dialog box and presets format is now identical across the Adobe Creative Suite.
Now that PDF job options are shared across Adobe Creative Suite 2 components, they are stored as a single set in a single central location for easy access and administration. For more information, see “Streamlining output with PDF presets” on page 112.
Impose publications with the ALAP InBooklet SE plug-in
Adobe InDesign CS2 now includes basic imposition capability, provided by the ALAP (A
Lowly Apprentice Production Inc.) InBooklet SE plug-in. InBooklet SE was formerly provided with InDesign CS as part of the Adobe PageMaker® Plug-In Pack, and is included with
Adobe InDesign CS2.
Backwards compatibility with Adobe InDesign CS
Adobe InDesign CS2 can export documents that can be opened by Adobe InDesign CS. It’s as simple as choosing File > Export and choosing InDesign Interchange format. This option creates a file with an .inx file name extension. You can open .inx documents using the File > Open command in InDesign CS (to do this, you must download an update to InDesign CS from the
Adobe website).
Because different format versions have different capabilities, any documents converted to newer or older versions must be examined closely before creating final output from them. For reliable prepress output, a service provider should always use the same version of Adobe InDesign used by the customer. If that isn’t possible, the customer should create a prepress-ready PDF that the service provider can output using Adobe Acrobat Professional software.
Output smoother drop shadows and feathered edges
Under certain output conditions, drop shadows and feathered edges can appear with banding.
Adding a small amount of noise is a time-tested way of diffusing tonal changes to prevent banding. The Drop Shadow and Feather effects in Adobe InDesign CS2 now provide a Noise option for this purpose.
In addition, the Drop Shadow effect includes a Spread option to provide additional flexibility by controlling shadow softness as measured from the shadow edge.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
12
Enjoy improved PDF compatibility with older RIPs
While Adobe InDesign has long been one of the most effective ways to output to up-to-date
RIPs, Adobe InDesign CS2 PDF output is now more compatible with older RIPs as well. The improved compatibility is achieved by keeping Adobe PostScript® Type 1 and TrueType fonts as they are when exported to PDF. However, if a character set in a document cannot be represented by Macintosh® or Windows ANSI font encodings—such as Japanese glyphs—they are exported to
PDF using CID font representation, which is not compatible with some older RIPs.
Manage and edit dictionaries more easily
Management of the spelling and hyphenation user dictionary is greatly expanded in
Adobe InDesign CS2, particularly in ways that benefit prepress service providers. It’s now possible to import and export custom word lists between a user’s dictionary and a text file, link to multiple dictionaries, and create a new dictionary from within InDesign CS2. Importing and exporting word lists makes it possible to edit custom word lists outside of InDesign CS2 and then import them into any dictionary, or to simply move words among dictionaries.
The new ability to link to multiple external dictionaries supports dictionaries located across a network, giving flexibility to workgroups. Dictionaries can be prioritized by arranging their sequence in the Dictionary panel of the Preferences dialog box, so that certain dictionaries take precedence over others.
The Dictionary panel now includes options for managing multiple linked dictionaries.
Prepress service providers can now use the Dictionary panel to quickly link or unlink a customer’s dictionary at any time, without removing or altering the prepress service provider’s own dictionary, to help ensure text composition is as the customer expects.
Other spelling enhancements include dynamic spelling so that the user doesn’t have to open the
Spelling window, and the ability to correct spelling with a context menu.
For more information, see “Managing customer dictionaries” on page 28.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
13
Reuse page content using snippets
Snippets are Adobe InDesign CS2 objects exported as files of their own (objects without pages).
Snippets are independent of any document, but can be placed into any document. You can freely drag snippets between Adobe InDesign CS2 and Adobe Bridge.
You can make a snippet by dragging it from InDesign CS2 to Adobe Bridge. You can then drag the snippet from
Bridge back to any InDesign CS2 layout.
Snippets make it easier to reuse Adobe InDesign content, especially objects that need specific positioning on the page. It’s easier because snippets remember page geometry—the position of an object on a page, and the position of objects relative to other objects saved in the same snippet.
Snippets have these capabilities because they are saved using the INX format—a snippet is actually a subset of an Adobe InDesign CS2 document. Snippet files are saved with an .inds file name extension.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
14
Maintaining consistent color
Compared to workflows such as web design, consistent color can be more challenging to achieve in prepress workflows because of the frequent presence of both CMYK and RGB objects in the same job; the different color models require very different color handling. Adobe Creative Suite 2 goes beyond typical color management implementations by designing a “safe CMYK” color workflow that respects and preserves CMYK data even when color-managing the conversion of
RGB images to CMYK in the same job.
In addition to simplifying today’s prepress workflow, Adobe Creative Suite 2 simplifies the administration of color settings across multiple applications and workstations. In
Adobe Creative Suite 2, you can control color consistency from one location (Adobe Bridge), and color settings files are centrally located and easy to share.
It’s important to read this section even if you have already worked with color management, because the changes that support color consistency in Adobe Creative Suite 2 represent significant prepress-friendly improvements upon existing color management implementations. Most importantly, the new safe CMYK workflow means that prepress service providers can be confident that CMYK colors are protected from unwanted conversions when using color management.
Achieving consistent color
Before Adobe Creative Suite 2, it was often difficult to prevent unwanted color conversions when creating output from a document containing both CMYK objects and color-managed RGB objects. Adobe Creative Suite 2 now offers a safe CMYK workflow that also lets users take advantage of the benefits of color management, such as accurate hard and soft proofing.
In the Adobe safe CMYK workflow, RGB and CMYK objects are handled as two separate streams from the time you place files to the time you create final output. When targeting CMYK output,
RGB objects are converted from their source profiles to the proper CMYK output profile, while objects that are already CMYK are left untouched as long as the Preserve CMYK Numbers option is on in the Color Management panel of the Print or Export PDF dialog boxes (it’s on by default). The result is that carefully separated CMYK images are not changed anywhere in the workflow, even when color-managed conversions are applied to RGB images.
All color settings that ship with Adobe Creative Suite 2 use the safe CMYK workflow; their primary differences are in how they handle RGB color and profile mismatch warnings. You can apply color settings to all Adobe Creative Suite 2 products in the Suite Color Settings dialog box in Adobe Bridge. The North American Prepress 2 option is configured to use the Adobe RGB default working space (instead of sRGB) and to display profile warnings for closer monitoring of objects moving through the color workflow.
The North American General Purpose 2 color settings option is designed to be less intrusive and to provide a more consistent on-screen match with applications that aren’t color-managed. This display consistency is achieved by using the sRGB default RGB working space, the default color setting for Adobe Creative Suite 2. As sRGB is simply a document default for RGB objects, using sRGB does not negatively affect placed RGB images that use other color spaces. As long as an
RGB image is tagged with the profile for its actual color space, the image’s original color range is preserved until final CMYK conversion during prepress output. For more information, see
“Using a safe CMYK workflow” on page 17.
Adobe InDesign CS2 also improves the representation of black for monitor display or printed comps, so that black appears consistent between color-managed Adobe InDesign CS2 documents and other applications that aren’t color-managed. For more information, see “Customizing black appearance for monitor display or printed comps” on page 20.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
15
Synchronizing color settings across Adobe Creative Suite 2 components
You can use Adobe Bridge to synchronize color settings across all Adobe Creative Suite 2 components. Each Adobe Creative Suite component’s own Color Settings dialog box indicates when its color settings are out of sync with the rest of Adobe Creative Suite 2. When this happens, you can easily synchronize Adobe Creative Suite 2 again in Adobe Bridge.
You can create color settings that are customized for your workflow. If you do this, use an appropriate settings file as a starting point (if you operate jobs in North America, you might start with the North American Prepress 2 settings). All color settings are saved as files that you can distribute throughout your shop and provide to customers. Once your customers have your color settings file, they can synchronize all of their Adobe Creative Suite 2 applications using your settings.
To synchronize the color settings of all Adobe Creative Suite 2 applications:
1 Open Adobe Bridge. Note that you can open Adobe Bridge from an icon on the InDesign CS2
Control Palette.
2 Choose Edit > Creative Suite Color Settings.
3 If you want to use color settings that are available for geographical regions other than your own, select Show Expanded List of Color Settings Files.
4 Select the color settings you want to use. Adobe Bridge applies your selection to all
Adobe Creative Suite 2 applications.
To create a customized Color Settings file:
1 Start Adobe InDesign.
2 Choose Edit > Color Settings.
3 Change the color settings as needed for your workflow.
4 Click Save.
5 Name the file, and click Save.
To locate a Color Settings file and make it available for sharing:
1 Open Adobe Bridge.
2 Choose Edit > Creative Suite Color Settings.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
16
3 Click Show CSF Folder in Finder (Mac OS) or Explorer (Windows). The Color folder opens in the Mac OS X Finder or on the Windows desktop.
4 In the Color folder, locate the file name that matches the color settings you want to share. Color settings file names end in .csf.
5 Copy the desired color settings file to another location for sharing. (Do not remove the .csf file from the Color folder unless you don’t want it to be available on that machine.) If your shop maintains a website with a customer support area, you can upload it there for customer downloading, or you can e-mail the file to your customers by attaching it to an e-mail message.
To use a customized color settings file:
1 Locate the Settings folder for the Adobe Creative Suite 2:
• On Mac OS X, the folder is located at:
(username)/Library/Application Support/Adobe/Color/Settings
If you don’t see the color settings file name you’re looking for, try looking in:
Computer/(hard drive name)/Library/Application Support/Adobe/Color/Settings
• On Windows, the folder is located at:
C:\Documents and Settings\(username)\Library\Application Support\Adobe\
Color\Settings
2 Copy the color settings file you want to use into the Settings folder. You may need to quit and restart Adobe applications before they will display the color settings file you added.
Using a safe CMYK workflow
New options and default color settings in Adobe Creative Suite 2 simplify the setup and implementation of a safe CMYK workflow. The most important step is to use a CMYK-safe color settings file. All color settings files that ship with Adobe Creative Suite 2 support a safe CMYK workflow. The following guidelines also contribute to preserving CMYK values throughout the workflow:
• A color settings file is CMYK-safe when its CMYK Color Management Policy is set to Off or
Preserve Numbers. If you make a customized color settings file and want to make sure it is still CMYK safe, be sure to select one of those two policies. Your customers don’t need to use exactly the same color settings file that you do, as long as they use a color settings file where the
CMYK Color Management Policy is set to Off or Preserve Numbers.
• If you want to prevent all CMYK files from being converted, you can set the CMYK Color
Management Policy to Off (in the Color Settings dialog box). RGB objects are still converted to CMYK. However, the Preserve Numbers policy does the same thing (ignoring profiles in linked images) while enabling you to assign CMYK profiles to specific images on the layout as appropriate. When you select the Preserve Numbers policy, you may want to make sure that the Ask When Opening warnings for Profile Mismatches and Missing Profiles are enabled; the warnings may indicate that a file was prepared for a different target profile or a different policy, which means you may need to confirm output expectations with the customer.
• When selecting options for CMYK color conversions in the Print or Export Adobe PDF dialog boxes, select Preserve Numbers or Preserve CMYK Numbers whenever possible. These options don’t alter the existing color values of a CMYK file that doesn’t contain an embedded profile.
The Output panel of the Print dialog box contains the Preserve CMYK Numbers option when you set the output to separations, and the Output panel of the Export Adobe PDF dialog box contains the Color Conversion option Convert to Destination (Preserve Numbers). These settings are CMYK-safe by default.
• It’s a good idea to set the document profile to match the output profile, because when these profiles are identical, there is no need for conversion, so InDesign CS2 leaves CMYK values untouched. However, if you’ve set the color conversion to Preserve Numbers, it isn’t essential that the profiles match, because selecting Preserve Numbers prevents conversion of CMYK color even if the profiles differ.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
17
• It’s good practice to use the same color settings file at all points in the workflow, both at the customer site and at the prepress service provider. If the document is opened and saved on any workstation where the color settings or policies enable conversion of CMYK colors, the safe CMYK workflow will be defeated. If a policy warning dialog box appears when you open an Adobe InDesign CS2 document, click Cancel and consult with the customer to clarify the conditions under which the document was created. To help ensure the successful implementation of the safe CMYK workflow, provide workflow instructions and color settings files to customers in advance. Fortunately, proper setup involves only the few locations listed below, and if Adobe Creative Suite 2 is installed without altering the default color settings, the steps are already done for you. The steps below can be used as a checklist in case the settings of any workstation are uncertain.
To set up a safe CMYK workflow:
1 In Adobe Bridge, select a color settings file appropriate for your workflow. See “Synchronizing color settings across Adobe Creative Suite 2 components” on page 16.
2 In Adobe InDesign CS2, choose Edit > Color Settings.
3 In the Working Spaces area, for CMYK, make sure a profile is selected that accurately describes the CMYK output device at the prepress service provider.
4 When preparing RGB objects for use in Adobe InDesign CS2, make sure they are saved with embedded profiles. (In Adobe Creative Suite 2 components, profiles are embedded by default.)
5 When it’s time to print from Adobe InDesign CS2, choose File > Print, and click the Output pane, and make sure Separations or In-RIP Separations is selected in the Color menu.
6 Click the Color Management pane. In the Options area, make sure Preserve CMYK Numbers is selected. By default, it’s selected and unavailable but becomes available if you change the Color
Handling and Printer Profile options away from their default settings. If the job requires that
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
18
you choose a Printer Profile that’s different than the Document profile, keep Preserve CMYK
Numbers selected in order to prevent conversion of CMYK colors.
Customizing a color settings file
You may want to create a custom color settings file for your shop and your customers, particularly to set the CMYK working space to match your workflow. When creating a color settings file, keep the following in mind:
• As a starting point, use any of the built-in color settings, but make sure your CMYK settings remain CMYK-safe as described earlier.
• In many cases, the only change to be made is to set the CMYK working space to an accurate CMYK profile for your proofing standard or press, if available. This prevents profile mismatches and may enable your customers to more closely simulate final CMYK color on their own monitor and color printers.
• Don’t share customized monitor profiles. Each monitor needs a profile specifically generated for that individual monitor, using the Apple® Display Calibrator Assistant (Mac OS), Adobe
Gamma (Windows), or other calibration hardware or software.
• Document working spaces affect the appearance, not the color values, of objects created in
InDesign and of placed bitmap graphics that don’t have an embedded profile.
To create a custom color settings file:
1 In Adobe InDesign CS2, choose Edit > Color Settings.
2 From the Settings menu, select the color settings you want to use as a starting point. Starting from a built-in prepress-oriented color settings file is recommended.
3 Change settings as needed.
4 Click Save.
5 Specify a location and descriptive file name, and click Save.
6 In Adobe Bridge, choose Edit > Creative Suite Color Settings (Windows) or Bridge >
Creative Suite Color Settings, and then click Show Saved Color Settings Files.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
19
7 With the Settings folder open on the desktop, move or copy your color settings file to the Color folder from the location where you saved it.
8 Switch to Bridge, select the new color settings file, and click Apply.
Customizing black appearance for monitor display or printed comps
Adobe InDesign CS2 lets you control how black appears on a monitor. A color-managed display accurately represents the density of 100% black-only ink on typical print media, which is noticeably lower than the density of a printed rich black or the RGB black level on a monitor. Applications that are not color-managed display black at the monitor’s RGB black level, so the difference between video and printed (“dull”) black can be disconcerting when switching among programs.
In Adobe InDesign CS2, you can use the Appearance of Black preference to display black as dark as possible (as Rich Black) or to render it accurately with respect to the output medium as in
Adobe InDesign CS. You can set this option separately for on-screen display and printing and exporting to RGB or grayscale devices. Regardless of which option you choose, this setting does not affect color-separated CMYK output in any way—the Printing/Exporting option only affects devices typically used for comps.
If you choose the Proof Setup command for display or the Proof option in the Color Management panel of the Print dialog box, InDesign CS2 displays and prints blacks accurately, so you don’t have to change the Appearance of Black setting for proofing. Note that low-end proofing devices that use CMYK inks (such as inkjet printers) are typically RGB devices unless you drive them with a CMYK RIP; their native drivers are typically designed to receive RGB data and therefore are considered to be RGB proofing devices that are affected by the Appearance of Black preference.
To customize black appearance on a monitor display or on printed comps:
1 In Adobe InDesign, choose Edit > Preferences > Appearance of Black (Windows), or InDesign
> Preferences > Appearance of Black (Mac OS X).
2 For both the On Screen and Printing/Exporting menus, choose one of the following:
• Display All Blacks and Rich Black. Represents black as dark as possible, regardless of the actual density of black on CMYK separations. Doesn’t affect CMYK separations.
• Output All Blacks Accurately. Represents the actual density of black as it will output on CMYK separations.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
20
On-screen, Black can be displayed either accurately or completely solid.
Working with color management off
In Adobe InDesign CS2 and throughout Adobe Creative Suite 2, color management is on by default. Under most circumstances, the most flexible prepress workflow in Adobe InDesign CS2 and Adobe Creative Suite 2 is to have color management on, because the color settings in
Adobe Creative Suite 2 are designed for a safe CMYK workflow. Turning color management off also turns off profile and policy warnings, which increases the chance of misinterpreted colors as graphics are moved among applications, particularly for RGB objects from color-managed applications. However, if you use a workflow where color management must be turned off,
Adobe InDesign CS2 provides a color setting that fulfills this need.
To turn off color management:
1 Choose Edit > Color Settings.
2 From the Settings menu, select Emulate Adobe InDesign 2.0 CMS Off, and click OK.
Note: If you encounter prepress customers using the Monitor Color option, strongly encourage them to switch to color settings that use an objective RGB standard such as Adobe RGB or sRGB.
Monitor Color is not appropriate for prepress jobs; it is only suitable for work that always appears on screen. Some users may believe that they prefer Monitor Color if their system is not properly color-managed, for example when their monitor is not calibrated correctly. This is because miscalibrated or uncalibrated devices will make a color management system appear to work improperly, when the real fix is to create and use proper profiles and policies.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
21
Helping customers prepare
InDesign files
If you provide workstation setup and job handoff checklists to your customers, you can use this section to adapt your checklists for InDesign CS2.
Preparing customers for consistent color
For the most consistent color for both CMYK output and on-screen media, it’s best to standardize on the safe CMYK workflow, which is the default color workflow for
Adobe Creative Suite 2. This new default color workflow is designed to provide the most consistent results with the least amount of effort. Simplified administration and centralized color settings make it easy to provide your standard color settings files and instructions for customers to share across their workgroups. For more information, see “Maintaining consistent color” on page 15.
Preparing transparency
For complete information on transparency issues, see “Flattening transparency for high-resolution output” on page 57. To minimize issues with transparency, advise customers to do the following:
• Use color settings compatible with your shop’s workflow—particularly the CMYK (default) and RGB working spaces. See “Using presets and settings files to further streamline customer handoffs” on page 24.
• Set the transparency blend space to CMYK (choose Edit > Transparency Blend Space >
CMYK).
• Place Adobe native formats that support unflattened transparency: Illustrator 9 or later (native
AI format, not EPS), Photoshop 4 or later, or PDF 1.4 (Acrobat 5) or PDF 1.5 (Acrobat 6).
Adobe InDesign CS2 can flatten EPS versions of Illustrator files that intersect an object that uses transparency, but results may not be satisfactory if the Illustrator EPS file was already flattened at settings that are not appropriate for high-resolution color output.
• Use Illustrator 10 or later for best results with spot colors and overprinting.
• If pages using transparency include Illustrator 9 or 10 artwork—particularly if the artwork was saved in Illustrator native or EPS formats earlier than Illustrator 9—use Overprint Preview to verify that results will be as expected.
• When using transparency with spot colors, use Overprint Preview to monitor the results.
Customers should feel free to use spot colors with transparency, but placed files created with older versions of other graphics applications may cause issues that can be identified in advance using the output preview features.
• When applying the Difference, Exclusion, Hue, Color, Saturation, or Luminosity blending modes to transparent objects that use spot colors, use Overprint Preview or the Separations Preview palette to monitor the results more accurately, or achieve the effect using other blending modes or techniques.
• If preseparated files (multichannel or DCS) interact with objects that use transparency, convert them to Photoshop files before creating output from the InDesign document. Some Photoshop
DCS 1.0 and 2.0 files may not need to be converted if they produce the desired results. Note that Adobe InDesign CS2 can import Adobe Photoshop files containing spot channels, and multitone files (such as files in Duotone mode), but not Photoshop files saved in Multichannel mode.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
22
• Preflight the document making sure that all fonts and high-resolution links are available.
Without these items, transparency can’t be calculated to imagesetter resolutions. You can verify each image’s resolution using the Links and Images panel in the Preflight dialog box or in the preflight report. If an OPI workflow is being used, check the list of conditions under
“Flattening OPI workflows” on page 61.
• Make sure that all high-resolution links and fonts in imported EPS files are embedded in those files. For example, if an InDesign document includes an Illustrator file that contains a TIFF image, that TIFF image should be embedded in the Illustrator file. (Of course, the Illustrator file should normally be linked to the InDesign document.)
• For placed PDF and EPS files, make sure all necessary fonts are embedded or available. You can use the Preflight command to verify this.
• Expect to closely examine InDesign pages containing transparency. While color proofs are a proven way to do this, you can also use the Flattener Preview palette to anticipate the effects of transparency flattener settings. The Pages palette displays a checkerboard pattern to identify pages that contain objects with transparency applied.
Preparing documents that use Adobe Stock Photos
Adobe Stock Photos are integrated into Adobe Creative Suite 2 in a way that makes them easier to output reliably, which benefits prepress workflows. In the process of downloading and experimenting with images from other stock photo services, a customer may unintentionally hand off a document that contains unused FPO images. A customer may also forget to acquire a high-resolution version of the final images he or she wants to use. To prevent unwanted output,
Adobe InDesign CS2 can identify all Adobe Stock Photos that are comp images—images not suitable for high-resolution output. Comp images are marked with a special icon ( ) in the
Links palette and are detected by the Preflight feature. The customer can then use Adobe Bridge to locate the missing high-resolution files to be passed on to the prepress service provider or purchase them if necessary.
For more information about checking for comp photos in layouts, see “Managing links and relinking imported files“ on page 33, and “Preflighting the document” on page 47.
Preparing documents that apply layer overrides to imported files
For complete information on layer overrides, see “Checking layer visibility overrides” on page 41.
Layer overrides provide great design flexibility and can potentially streamline workflows and file management. Layer overrides only change which objects are visible in a placed file—they don’t directly affect output quality or performance. Customers should be responsible for verifying that layer overrides represent the desired appearance of an imported layered file before handoff by doing the following:
• Use the Links palette or the Preflight feature to identify files that use layer overrides.
• Before proofing files with layer overrides, use the Links palette to update all links.
• For each file that uses layer overrides, check its appearance on the layout or on a proof to make sure its layers appear as intended. Have customers provide a PDF of the intended output, and compare layered files to the customer’s PDF.
• Don’t flatten files that use layer overrides. If customers or service providers routinely flatten all layered files before handoff, they need to adjust this aspect of their workflow before using layer overrides.
• Notify the service provider that layer overrides are applied. The service provider can use the
Links palette or the Preflight feature to identify those files if needed; for example, to make sure that no one flattens them.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
23
Preparing book files
For complete information on book files, see “Working with a book file“ on page 39. Customers should be responsible for making sure book files are completely up to date before submitting them by doing the following:
• Notify the service provider that a book file controls the publication.
• Synchronize the book. Once the book is synchronized by the customer, it should not be reordered or synchronized by the prepress service provider.
• Verify pagination.
• If a table of contents and index have been generated, make sure they’re current.
• Preflight the book.
• Package the book—an especially good idea given the possible number of files and fonts involved.
Using presets and settings files to further streamline customer handoffs
Your shop can minimize potential output issues by taking full advantage of the settings files you can configure in InDesign. Consider providing customers with presets that you can use to increase output reliability and job throughput, such as the following:
• Document presets. These presets save the settings in the Document Setup dialog box.
• Print presets. These presets save the settings in the Print dialog box.
• Trap presets. These presets save trapping settings.
• Transparency flattener presets. These presets save settings for flattening transparency when creating output for formats or devices that cannot process transparency data.
• Color settings files. If your shop uses color management, you may want to advise customers on color management settings that will ensure a smooth handoff to your shop. The Color Settings dialog box in Adobe InDesign CS2 is consistent with Adobe Photoshop, Adobe Illustrator, and other Adobe Creative Suite 2 applications. You can create your own standard color settings file that you can apply to all of your computers and send to customers. For example, a color settings file can specify whether or not the customer’s machine embeds profiles or converts colors, and what destination profile is used for proofing. Just set the options in the Color
Settings dialog box and click Save.
• Color swatches. Adobe InDesign CS2 and earlier versions can load spot and process swatches (not gradient or pattern swatches) from other Adobe InDesign documents. In
Adobe Creative Suite 2, selected color swatches can also be saved to an independent file that can be loaded into any Adobe Creative Suite 2 application that uses swatches, and this swatch file can be sent to your customers. To do this, select one or more swatches in the Swatches palette, and then choose Save Swatches from the Swatches palette menu. After you specify a file name and location, the swatches file is saved with the .ase file name extension. If you want a customer to use only the swatches in the swatches file (for example, if spot colors are involved), you may want them to remove all other swatches before importing the file (choose Select All
Unused from the Swatches palette menu, and then click the trash can icon).
• PDF Job Options presets. If you accept PDF files from customers, create a PDF export preset customized for your workflow and provide it to them. If the Press Quality or PDF/X-1a preset built into InDesign does not create optimal output for your workflow, you can create your own customized version to provide to your customers. PDF Job Options can now be shared among
Adobe Creative Suite 2 applications, so you can provide a customer with one set of job options that works with every Adobe Creative Suite 2 component, including Photoshop, Illustrator,
Acrobat Distiller, and GoLive. The user interface for PDF job options is also more consistent across the components of Adobe Creative Suite 2. You can import PDF Job Options from
Acrobat Distiller 5.0 and later.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
24
Preflighting
Encourage customers to preflight their documents before handing them off to identify any problems that need to be resolved at the customer’s location. See “Preflighting the document” on page 47.
Packaging files for handoff
Packaging an InDesign document is similar to using the Save for Service Provider command in Adobe PageMaker or the Collect for Output feature in QuarkXPress. With the Package command, your customers or customer service representatives can collect the files needed to output an InDesign document, as well as provide contact information and instructions that help streamline the communication process between designers and prepress and printing professionals. The Package feature collects linked graphics and fonts, including fonts used in linked
EPS and PDF files. All of these files plus preflight and package reports are then saved into a single folder for easy delivery. You can use this feature two ways: by choosing File > Package, or by clicking Package in the Preflight dialog box. If the document contains problems that generate
Preflight warnings, we recommend resolving any issues before packaging the document—otherwise, the resulting package may be incomplete. Be sure your customers understand that incomplete packages can cause production delays. The Package feature contains several steps:
In the Printing Instructions dialog box, customers can enter contact information and any special printing instructions. The information then appears in an automatically generated report, which also includes a list of all used fonts, links, inks required to print the document, and current print settings. This report is stored in the same folder as the other packaged files and can be a valuable troubleshooting resource for your staff.
The Printing Instructions dialog box can clarify communication between customers and service providers.
In the Create Package Folder dialog box or Package Publication panel, you specify a name and location for the package folder, as well as whether to copy Fonts and Linked Graphics used in the document (a subfolder is created for each option you select). The InDesign document and the
Printing Instructions report are automatically copied to the folder you specify here.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
25
Use the Create Package Folder dialog box to control the packaging of linked assets.
The Create Package Folder or Package Publication panel contains the following option:
• Update Graphic Links in Package. This option helps to ensure that all graphic and image links are up to date. When you package a document, the linked files are collected and copied to one folder named Links. By updating the graphic links at the time the document is packaged, your customers can help ensure that the links in their documents don’t cause output problems.
• Use Document Hyphenation Exceptions only. This option embeds the customer’s user dictionary in the InDesign document, and helps to ensure that other user dictionaries (such as those on computers used to output the file) are ignored. This can help prevent unwanted lastminute line break changes, which can in turn cause production delays.
• Include Fonts and Links From Hidden Document Layers. This option includes all fonts and linked files on hidden InDesign document layers (not layers in imported files). This option is turned off by default, meaning that Adobe InDesign CS2 only includes content on layers that are visible at the time the document is packaged.
• View Report. This option automatically displays the Printing Instructions report after the package is created. The report is always saved to the package folder whether or not this option is selected.
• Instructions. This button opens the Printing Instructions panel.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
26
Handing off Adobe PDF files
While PDF files are easy to create, correctly defining PDF settings is critical for press-quality output. Before you arrange to receive Adobe PDF files from customers, you may want to discuss with them the factors that affect PDF output, such as compression, image subsampling and downsampling, and font embedding. To greatly simplify the process, you may want to supply customers with a PDF Job Options file that defines all of the PDF export options for them. As a starting point, InDesign CS2 includes a built-in PDF export preset called Press Quality, intended for high-end prepress. InDesign CS2 also includes export presets that support the ISO-based
PDF/X standards for press-quality output; these presets are named PDF/X-1a 2001 and PDF/X-3
2002. You use PDF export presets in much the same way as print presets, except that you manage them using the File > Adobe PDF Presets command.
The version of PDF used is important because of the different capabilities of each version, and because some workflows (such as RIPs and prepress applications) support specific PDF versions.
The following is a brief summary of the differences among PDF versions that are most relevant to prepress:
• PDF 1.3 is supported by many RIPs and is the version upon which the PDF/X-1a standard is based. Transparency must be flattened for PDF 1.3.
• PDF 1.4 adds support for transparency. Some RIPs process PDF 1.4 directly. Transparency in an Adobe InDesign document doesn’t need to be flattened when exported to PDF 1.4 or above.
• PDF 1.5 adds support for document layers and JPEG 2000 image compression.
• PDF 1.6 adds support for embedded OpenType fonts and workflows that incorporate the Job
Definition Format (JDF).
Adobe InDesign CS2 supports all of these versions of PDF. For more information about the
PDF/X standards, see “About the predefined PDF export presets” on page 112. Customers can learn more about setting up PDF files from the document “How to Create Adobe PDF Files for
Print and Press,” available at the following URL: http://www.Adobe.com/print/prodzone/pdfs/PDFforPrint.pdf
Be sure to check the URL for updated versions of the document as it is updated with information about new application versions such as Adobe InDesign CS2.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
27
Opening InDesign files
As you open a file, InDesign lets you know whenever something about the file isn’t ready for final output, such as missing fonts or linked files. The rest of this section suggests actions to take in these situations.
About InDesign icons and program versions
Due to the way in which operating systems associate icons with programs, the icons for
InDesign 2.x, InDesign CS, and InDesign CS2 documents are identical. Double-clicking on documents with InDesign icons opens them in InDesign CS2.
If a document was last saved by InDesign 1.x, 2, or CS, it will be converted to InDesign CS2 format. This should not cause output problems unless the text is edited after conversion. If a document has been converted from InDesign 1.x and the text is edited, the text may reflow due to changes and improvements in the more recent text composition engine.
Managing customer dictionaries
Adobe InDesign refers to dictionary files when composing text because dictionaries include hyphenation data. When a spelling or hyphenation exception is created, it can be added to the local user dictionary or saved within that specific document. Adobe InDesign CS2 adds the ability to link to external dictionaries, so if customers use externally linked dictionaries they should include them when submitting a job to the prepress service provider.
Handling dictionary differences
When you open some customer files, you may see a message indicating a conflict between the document’s hyphenation dictionary and the user dictionary installed at your workstation.
To preserve the hyphenation of a customer document, click Document—not User Dictionary.
The two available choices are User Dictionary and Document. From a service provider’s point of view, User Dictionary means the dictionary installed on your shop’s workstation, and Document means the dictionary in a customer’s file.
If there is a conflict, it usually means that the customer has modified the dictionary in the document. In this case, the safe choice is to click the Document option to compose the text as the customer saw it. Clicking User Dictionary may cause the text to compose in unexpected ways because it will apply the dictionary from the computer where the document was opened.
If a document used an externally linked dictionary that is no longer present at its last known location, Adobe InDesign CS displays an alert message.
When a linked dictionary is not found, have the customer provide a copy of it.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
28
If you need to manage links to external dictionaries, use the Dictionary panel of the Preferences dialog box. The Dictionary panel displays a list of linked dictionaries with options for managing the list and for controlling dictionary behavior. You can create a new black dictionary here.
Status icons appear if dictionary access is limited. The missing link icon ( ) indicates that a linked dictionary isn’t available; for example, it’s located on a volume that’s been unmounted.
The lock icon ( ) indicates that a linked dictionary on a remote volume can’t be modified (you can’t add words to it) because a dictionary on a server can only be written to by the first user who reads that dictionary file.
A B
Useful dictionary preferences for service providers
A Missing link icon
B Lock icon
C List of linked dictionaries
D Relink, New, Add, and
Remove buttons (left to right)
E Compose Using menu
F Merge User Dictionary
Into Document preference
E
F
C
D
To relink to a dictionary with a missing link:
1 Make sure the missing dictionary’s volume is mounted.
2 In the Dictionary panel of the Preferences dialog box, select the missing dictionary in the list.
3 Click the Relink button.
4 Locate and select the dictionary, and click Open.
To create a new blank dictionary:
In the Dictionary panel of the Preferences dialog box, click the New button.
2 Specify a location and file name, and click Save.
To add a linked dictionary:
1 In the Dictionary panel of the Preferences dialog box, click the Add button.
2 Locate and select the dictionary, and click Open.
To remove a linked dictionary:
1 In the Dictionary panel of the Preferences dialog box, click the Remove button.
To control the order in which dictionaries are searched, drag higher priority dictionaries above lower priority dictionaries in the list.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
29
Importing and exporting word lists
Another way to transfer dictionary contents is by importing and exporting a word list to or from a specific dictionary. In some cases this may be more convenient than transferring dictionary files. For example, multiple dictionaries can be combined by exporting each dictionary’s word list to a text file, and then importing all of the word list text files into a single dictionary file. The ability to import also makes it possible to prepare word lists in a text editor and then import them into any dictionary.
To import a word list:
1 Choose Edit > Spelling > Dictionary.
2 Select a target dictionary from the Target menu. Linked dictionaries are above the line; the document’s internal dictionary is below the line. Don’t choose a language dictionary supplied by
Adobe (such as ENG.UDC); you can’t import to or export from them.
3 In the Dictionary List menu, make sure Added words is selected. You can’t import into any other lists in that menu.
4 Click Import.
5 Locate and select the word list you want to import, and click Open.
To export a word list:
1 Choose Edit > Spelling > Dictionary.
2 Select a dictionary from the Target menu. This selection determines the dictionary from which you’ll export a list. Linked dictionaries are above the line; the document’s internal dictionary is below the line. Don’t choose a language dictionary supplied by Adobe (such as ENG.UDC); you can’t import to or export from them.
3 In the Dictionary List menu, make sure Added words is selected. You can’t export from any other lists in that menu.
4 Click Export, specify a location and file name, and click OK.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
30
Managing missing fonts
When you open a customer file that uses fonts not active on the current computer, InDesign displays an alert that lists the missing fonts. Clicking the Find Font button opens the Find
Font dialog box. You can use this dialog box to see where in the document the missing fonts appear and to gather additional information about the missing fonts, such as whether they are
PostScript Type 1, TrueType, or OpenType. You can also use the Find Font dialog box to replace the missing font with an available one. However, changing the font may change text composition, so this should only be done with the customer’s knowledge and consent.
Even fonts missing from placed EPS and PDF files are identified. If a missing font is within a placed graphic, each instance is listed in the Find Font dialog box and marked with an icon
( ). You can’t replace missing fonts inside placed graphics, but identifying the problem makes it easy to alert the customer before you output the file. It will be necessary to either obtain the font or open the graphic in its original application to change the font. In addition, an alert appears when placing an EPS file that doesn’t contain a PICT or TIFF preview and is missing fonts because InDesign attempts to create a preview when none is present, and a preview can’t be created for missing fonts.
Adobe InDesign CS2 features improved reporting of font errors and substitution. A missing font will be reported even if a font of the same name is available in a different font format. For example, if Copperplate (Type 1) is missing, a missing-font alert appears, even if a TrueType version of Copperplate is active on the system; in addition, the TrueType version won’t be automatically substituted for the missing Type 1 version. Suppressing substitution by TrueType can prevent unwanted type composition changes caused by font format differences. In addition, if a font is active in more than one format, Adobe InDesign CS2 displays each instance of the font in the menu with a format label after it (T1 for Type 1, TT for TrueType, and OTF for Open Type).
After the file opens, Adobe InDesign CS2 highlights any missing fonts on-screen in pink, if the
Substituted Fonts option is selected in the Composition panel of the Preferences dialog box. You might want to examine the other preferences in that panel in case highlighting composition problems is useful to your shop. (View composition preferences by choosing Edit > Preferences >
Composition in Windows, or InDesign > Preferences > Composition in Mac OS X.)
To replace fonts:
1 With a document open, choose Type > Find Font.
2 In the Fonts in Document list, select a font. Missing fonts are identified by a yellow alert triangle ( ).
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
31
You can also select fonts in the Fonts in Document list by clicking in the list and using the arrow keys.
3 Do one of the following:
• To find the first layout instance of the font selected in the list, click Find First. The text that uses the font moves into view. The Find First button won’t be available if the selected instance of a font is used in an imported graphic or if you selected multiple fonts in the list.
• To select an imported graphic that uses a font in the list, click Find Graphic. (A graphic icon ( ) appears next to the format label to identify fonts in imported graphics.) The graphic moves into view. When the graphic becomes selected, you can then use the Edit Original command (available on the Links palette menu) to open it in the application that created it. The Find Graphic button isn’t available if the selected instance of the font is used on the layout or if you selected multiple fonts in the list.
4 To see details about a selected font, click More Info. To hide the details, click Less Info. The
Info area will be blank if you selected multiple fonts in the list.
Note: The font type may be listed as Unknown if the file format of a selected graphic doesn’t supply information about the font type. Also, fonts are listed only if they’re applied to searchable characters. Therefore, you can’t find and replace fonts that have been converted to outlines or used in bitmap graphics (such as TIFF images).
5 To replace the font, select the new font you want to use from the Replace With list, and do one of the following:
• Click Change to change just that instance of the selected font.
• Click Change/Find to change that instance and then find the next instance.
• Click Change All to change all instances of the fonts selected in the list.
When there are no more instances of a font in your file, that font name is removed from the
Fonts in Document list.
Note: To change fonts in imported graphics, use the program that originally exported the graphic, and then use the InDesign Links palette to replace or relink the graphic in the
InDesign document.
6 If you clicked Change, click Find Next to locate the next instance of the font.
7 Click Done.
Tip: If you want to change multiple fonts to the same font, you can select more than one font in the list. However, you can only find font instances or view font details when a single font is selected in the list.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
32
Managing links and relinking imported files
When you open a file that contains missing or modified links to placed files, InDesign displays an alert and provides several features that make it easy for you to resolve linkrelated problems in customer files. To resolve the problems right away, click the Fix Links button. You’ll be asked to relink to any missing links, and any modified links (files on disk that have been modified since being placed in the InDesign document) are updated automatically. InDesign enables you to relink to files with different names and even different types (for example, you can relink to a TIFF file rather than the original EPS file). All transformations and cropping applied to the original linked graphic are preserved when you relink, even if you relink to a different file or the same file under a different name.
Links palette
A Missing link icon
B Page location
C Palette menu
D Modified link icon
E Comp stock photo image icon
F Layer visibility override icon
G Embedded graphic icon
H Relink button
I Go to link button
J Update link button
K Edit original button
A B
C
D
E
F
G
H I J K
Every text or graphics file placed into an InDesign document is listed in the Links palette. If the
Links palette isn’t already open, choose Window > Links to display it. By default, files are sorted by status, with missing or problem links at the top so that they are easy to identify at a glance.
Missing links—files that can no longer be located by following their original path—are indicated by a red circle with a question mark ( ). Modified links are indicated by a yellow triangle with an exclamation point ( ). Links with layer visibility overrides are indicated by an eye icon
( ). Adobe Stock Photo comp images are indicated by an icon ( ); they must be relinked to a licensed full-resolution version before final high-resolution output. If you need to relink a file manually, click the Relink button ( ) and locate the new file.
You can sort linked files in the palette by status, name, or page numbers by choosing options from the palette menu. For documents that contain numerous links, choosing Small Palette
Rows from the palette menu lets you see more links in less space.
To see more information about a linked file, such as its size and file type, you can double-click the link in the palette or select the link and choose Link Information from the Links palette menu.
Relinking and updating all linked graphics at once
When you receive an InDesign document that contains more than one missing or modified link, you can resolve all links at once rather than resolving each link individually.
To resolve all links at once:
1 Click the blank space to the left of the Relink button on the Link palette to deselect all links.
2 Click the Relink button ( cally.
) to have InDesign fix all missing links that it locates automati-
3 Click the Browse button in the Relink dialog box and locate the folder containing the first missing link.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
33
4 Select the file that corresponds to the file name in the Find dialog box title bar, and then click
Open (Windows) or Choose (Mac OS).
If all of the other missing graphics are stored in the same folder, all of their links will be resolved immediately. If some graphics aren’t found in the first folder you specified, you’ll be asked for their folder locations until all are found. For this reason, you may want to advise customers to store all of their document’s graphics in the same folder. To avoid linking errors, pay attention to the exact file name and location InDesign is requesting.
5 Click the Update Link button ( linked graphics.
) to make sure the document uses the latest version of all
Note: Links in multiple folders are relinked or updated when each folder is opened using the
Relink command.
Embedding and unembedding placed graphics
Customers have the option of embedding any linked graphics files in a document. As a service provider you may want to discourage this practice because it makes troubleshooting more difficult, and increases InDesign file sizes by the size of each embedded file. For these reasons, graphics placed into InDesign are linked by default.
Fortunately for service providers, embedded files are easy to manage in InDesign CS2. When you embed a linked graphic, the file name remains in the Links palette, marked by the Embedded icon ( ). In addition, InDesign CS2 remembers the graphic’s original location and lets you unembed it (meaning you can relink the embedded graphic to an externally stored file, if one is available). Note that unembedding is only available for placed graphics; pasted graphics can’t be unembedded. You may want to remind customers that placing graphics generally provides more flexibility and higher quality than pasting graphics. (There are a few cases where pasting can be desirable, such as pasting Adobe Illustrator paths into Adobe InDesign for further editing.
However, customers do need to be aware that pasting doesn’t enable a graphic to be updated from an external file.)
When you or a customer preflights a file that contains embedded graphics, the original graphic name is replaced with (Embedded), and the graphic’s page and type are still listed. If you want to see the embedded graphic’s file name, use the Links palette instead.
To unembed a graphic:
1 In the Links palette, select a graphic marked by the Embedded icon ( ).
2 From the Links palette menu, choose Unembed File.
3 You’ll be asked to link to the original file or to a new file. Click Yes to link to the original file or click No to link to a different file. (If you relink to a different file, make sure it works properly as a replacement for the formerly embedded graphic.)
Clicking Yes will work if the file is still in the same disk location as it was when it was originally placed. If you are working with a customer file that now resides on your computer, you may need to locate the original file submitted by the customer.
If you try to print a document that has missing or modified links, an alert appears. You can cancel printing or print anyway, although Adobe recommends resolving missing or modified links prior to printing. Missing and modified links are also identified when you preflight a file, and as you’d expect, you can easily resolve any link-related problems from within the Preflight dialog box.
Unlinking and relinking placed text files
Unlike placed graphics files, placed text files are always completely included in the document so that the text can be edited freely in InDesign. They are also linked to their source files, so that the Links palette can indicate when the source files have been modified after being placed. If text files are marked as missing in the Links palette or Preflight dialog box, it poses no problems for high-resolution printing because the text is completely included in the document.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
34
Placed text stories can be unlinked from their source files using the Links palette. Unlinking causes InDesign to stop tracking the source text files. If a customer uses a workflow where text is only edited and formatted within Adobe InDesign after it’s placed, unlinking text files can be a good idea to prevent unnecessary alerts caused by modified or missing external text files that are no longer needed. Depending on your customers’ editing workflow, you might consider adding an unlinking step to customer checklists you provide for handing off jobs.
To unlink text files:
1 Select all text files in the Links palette. You can use the standard methods for multiple selection
(Shift-clicking or Ctrl/Command-clicking items in the palette).
2 Choose Unlink from the Links palette menu. The unlinked items are removed from the Links palette, but the actual text files remain in the document.
It’s possible to relink an unlinked story to an external text file by using the Place command. You should relink to a text file only when the new text file is known to be a completely appropriate replacement for the selected text because it will completely replace the selected text. In addition, if the original text was formatted in InDesign, the formatting won’t be preserved by the replacement text.
To replace text files:
1 Use the type tool to select the text you want to replace.
2 Choose File > Place.
3 Locate the replacement text file, and make sure Replace Selected Item is selected in the Place dialog box.
4 Click OK or Open.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
35
Handling alerts about missing or mismatched color profiles
When you open a file, Adobe InDesign CS2 may present an alert saying that a file’s color profile is missing or doesn’t match the current working space. The correct action depends on how your shop handles color management. Color management is on by default in InDesign CS2 because the default color settings have been redesigned for a streamlined and CMYK-safe workflow.
This section describes how to handle color policy and profile mismatches that occur when opening InDesign files. For more comprehensive coverage of recommended practices for consistent color, see “Maintaining consistent color” on page 15.
If you frequently encounter alerts indicating missing or mismatched profiles, provide customers with the color settings in use at your shop and have them use Adobe Bridge to synchronize them across their workgroup. Some color settings files, such as the North American General Purpose
2, are configured to preserve CMYK numbers and convert RGB without displaying mismatch warnings. If you use such a color settings file you will rarely encounter the warnings described below. Other color settings, such as North American Prepress 2, are set to display warnings so that you can monitor workflow status more closely. If you do see the following alerts, it’s safer from a prepress point of view to make choices that preserve RGB profiles and preserve color numbers of CMYK objects. When you open a file that displays a mismatch alert, you may encounter it twice: once for the InDesign RGB working space and once for the InDesign CMYK working space.
The Profile or Policy Mismatch dialog box (RGB on the left, CMYK on the right) appears when a document opens on a computer that uses different color settings than those used to create the document.
There are two possible types of mismatches: profile mismatches and policy mismatches. A profile mismatch simply means that the RGB or CMYK working space of the user who saved the document is different than the working space of the user who is opening the document.
A policy mismatch is a difference in how each user resolves a profile mismatch. For example, one user might preserve color numbers (by ignoring embedded profiles), while another user might preserve color appearance (by applying embedded profiles). Preserving color numbers is typically correct for CMYK, but preserving profiles is typically correct for RGB graphics with embedded profiles.
When you see a mismatch alert message, you may take one of the following courses of action:
• Reconcile the root cause of the alert message.
Click Cancel and determine why the customer is using color settings that don’t match yours.
Then you can open the document and make one of the choices in the alert message. If practical, have the customer and your shop use the same color settings so that mismatches don’t happen in the future.
• Assume the document’s colors were correct in the customer’s environment.
For an RGB mismatch, if the document’s policy was Preserve and the customer’s placed RGB graphics include embedded profiles, you can select Leave the Document As Is. There is usually no need to change the RGB (working space) Profile.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
36
For a CMYK mismatch, you may need to change the CMYK (working space) profile to your shop’s standard. If the document’s policy was Preserve Numbers and the customer’s placed
CMYK images do not include embedded profiles, you can select Leave the Document As Is.
If the document’s CMYK policy was Preserve, you may want to consult with the customer to confirm that they intended to use the Preserve policy, because it is not CMYK-safe. If the document contains CMYK objects with embedded profiles, the Preserve policy keeps them, which may result in CMYK color conversions at output time. If that was not what the customer intended, simply choose Ignore Embedded Profiles to open the document in a safe CMYK mode.
• Defer the decision until later.
Select Leave the Document As Is, but make sure that at a later time you choose Edit > Assign
Profiles to verify that the profile assignments for both RGB and CMYK are appropriate, and then if necessary, change the profiles. Be aware that if there was a policy mismatch, saving the document on your computer applies your current color settings policy to the document.
For a comprehensive overview of color management, see the chapter “Producing Consistent
Color” in the Adobe InDesign CS2 User Guide or online Help.
It’s possible for a document to change the profile assignment of an individual image. For example, if you know that a placed image was saved with the wrong profile, you can either assign the correct profile or simply ignore the profile if the correct profile would match the document’s working space.
Note: You can change the profile assignment of bitmap images only, such as Photoshop or TIFF files. You can’t change the profile assignments of EPS or PDF files.
To change the profile assignment of an individual image:
1 With the direct-selection tool ( ), select an image.
2 Choose Object > Image Color Settings.
3 Assign the correct profile, and click OK. Assigning a profile to one graphic doesn’t affect any other graphics, and doesn’t change the working space of the InDesign CS2 document.
Note that at any time you can use the Info palette to identify the color profile of a selected image.
Preventing profile messages in a workflow that isn’t color-managed
If your shop doesn’t operate a color-managed workflow and you see profile mismatch messages while opening a file, click Cancel to stop opening the file, and then prevent any further profile messages from appearing by changing your Adobe InDesign CS2 color settings to emulate a workflow that isn’t color-managed. When you follow those steps, color profiles and policies are ignored, and color values in files you open (such as customer files) display and output without being adjusted for display or output devices.
When you disable color management in Adobe InDesign CS2, color settings can’t be synchronized with other Adobe Creative Suite 2 applications. You can’t use Adobe Bridge to disable color management because synchronized color settings require using color management and profiles to maintain consistent color.
To disable color management:
1 In InDesign, close all documents.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
37
2 Choose Edit > Color Settings.
You may notice that the Color Settings dialog box in Adobe InDesign CS2 is consistent with other Adobe Creative Suite 2 components.
3 Choose Emulate Adobe InDesign 2.0 CMS Off.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
38
Preparing InDesign documents for output
This section describes workflows and tasks you’re likely to perform when preparing a customer’s file for output. Understanding these procedures is well worth the time, because you may find these operations to be more efficient in Adobe InDesign CS2 than in other page-layout programs.
Working with a book file
Adobe InDesign CS2 can organize and manage sets of Adobe InDesign CS2 files in a book file, a file that works with a collection of documents that can dynamically share attributes and formats.
For example, a reference book with ten chapters can be created as ten files that exist separately but are managed together for pagination, indexing, and other operations. If a customer has used a book file, you’ll want to know about it because you’ll manage prepress operations such as preflighting and printing across all documents in a book. This requires using the book palette, which displays a book’s Adobe InDesign documents as a list.
Book palette
A Style source document icon
B Pagination column
C Palette menu
D Missing document icon
E Modified document icon
F Open document icon
G Document in use or read-only icon
H Remove document button
I
Add document button
J Print book (or selected files) button
K Save book button
L Synchronize book button
A
B
C
D
E
F
G
L K J I H
Keep the following in mind when working with book files:
• You open a book using the File > Open command. Book files use the .indb file name extension.
(If you don’t see any file name extensions, you may need to turn on a setting in your operating system that makes file name extensions visible).
• A book file appears as a palette when it’s open. Note that there is no Book palette command under the Window menu, because book palettes only exist when one or more book files are open. If more than one book is open, you’ll see multiple book palettes. A book palette’s name is the name of its book file.
• To find commands that affect files in a book, look on the palette menu for that book. For example, to preflight a book, you choose Preflight Book from the book palette menu. If you choose Preflight from the File menu, you’ll preflight the frontmost open document only, regardless of the documents selected in the book palette. Similarly, the File menu commands to print or export a PDF file affect the frontmost document only, not books; to print or export books you must choose Print or Export commands from the book’s palette menu. The exact name of the commands can change according to whether or not documents are selected in the book palette.
• Always preflight a book before creating output from it. Alert messages, such as those about missing fonts and graphics, don’t appear when you open a book file because a book containing many documents could potentially generate an unwanted number of alert messages.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
39
• Pay attention to which documents are selected in the book file. Some commands in the book palette menu, such as the Preflight Book, Export Book to PDF, and Print Book commands, operate on the selected documents only. To preflight, export, or print the entire book, make sure that either no documents are selected or all documents are selected in the book palette.
When documents are selected in the book palette, the Preflight Book, Export Book to PDF, and
Print Book commands appear as the Preflight Selected Documents, Export Selected Documents to PDF, and Print Selected Documents commands.
• It’s possible to create and print a book where the page size and orientation varies with each document in the book. You may want to verify the page orientations of your book files before setting up output media by double-clicking each file in the book palette to open and check them. Normally there’s no need to open individual files before creating output from a book.
Resolving modified icons in a book
A modified icon ( ) appears when a document in a book has changed since the last time the book was saved. When a document in a book has been modified, it’s no longer certain that the book’s pagination is correct because pages may have been added to or deleted from the modified document. For this reason, the only way to resolve a modified icon is to repaginate the book, so that InDesign can determine whether pages were added or deleted from the modified document and update the book accordingly.
Before you repaginate a particular book for the first time, it’s a good idea to preflight the book first to ensure that all necessary fonts are present. If fonts are missing, text may recompose, causing line breaks to change. Repaginate only after consulting with the customer, because it may alter the content (such as page numbering) of documents in the book.
To repaginate a book:
Choose Repaginate from a book’s palette menu.
Synchronizing documents in a book
When you synchronize a book, styles and swatches from the style source document replace those in the other documents. A document can belong to multiple book files. For these reasons, when a customer uses a book file, he or she should identify the style source document.
A book’s formatting is controlled by a style source document, a document in the book that controls all other documents in the book. Any document in a book can be a style source document, but by default, it’s the first document in the book file. When synchronizing, the following attributes are made consistent with the book’s style source document:
• Table of contents styles
• Character styles
• Paragraph styles
• Trap styles
• Swatches (color, gradient, and mixed ink swatches)
Note: Synchronizing a book file won’t resolve color management profile inconsistencies among book documents. To anticipate color management error messages before high-resolution output, export to PDF as a test, because profile conflict alert messages appear when the book is printed or exported. If you encounter a color profile conflict error message, determine the correct settings
(which may require a discussion with the customer) and change the color settings in documents as needed. Remember that you can quickly do this by saving the correct settings to a file (in the
Edit > Color Settings dialog box) and then loading them into other documents.
Because a book can contain complex links, cross-references, and other dependencies, it’s probably best to have customers synchronize, preflight, package, and proof book files so that the customer can resolve outstanding book-level issues before the files are handed off. If necessary, you can synchronize a book as long as you have the book file and all documents in its list.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
40
Synchronize a book only after consulting with the customer, because it may alter the appearance of documents in the book.
To synchronize an entire book file:
1 Open the book file. You don’t need to open all of the files in the book, but you may want to because the Edit > Undo command can undo synchronization changes only to files which are open.
2 Make sure the correct style source document is specified, as indicated by the Style Source
Document icon ( ).
3 Click in an empty area below the list of documents to deselect all documents.
4 From the book palette menu, choose Synchronize Options. Make sure all of the options you want to synchronize are on, and then click OK.
5 From the book palette menu, choose Synchronize Book.
6 When an alert appears indicating that the synchronization is successful, click OK.
Previewing the output area and printable items
After opening a file and before opening the Print dialog box, you may want to check the document in Preview, Bleed, or Slug mode. In Preview mode, the page is shown as it will appear when printed and trimmed, without bleeds and without nonprinting items. Nonprinting items include elements such as rulers, guides, grids, frame edges, text highlighting of missing fonts or composition issues, and objects designated as nonprinting in the Attributes palette. If you specified a bleed or slug area in the Document Setup dialog box, you can include those areas in the preview by using Bleed or Slug mode, respectively.
To preview the document:
Click the view mode icon at the bottom of the toolbox, and choose a mode from the pop-up menu that appears.
Normal
View mode icons at the bottom of the toolbox
If objects appear to be missing in Preview mode, those objects may have been designated as nonprinting (by selecting Nonprinting in the Attributes palette). If entire layers are unexpectedly visible or not visible, they may not be set to the correct visibility settings in the Layers palette. In any of these cases, you may want to check customer proofs or otherwise confirm the correct visibility settings with the customer before continuing.
The Nonprinting option is available in the Attributes palette.
Checking layer visibility overrides
A designer can now take full advantage of variations built using layers in Adobe Photoshop,
Illustrator, or PDF files, or layer comps in Photoshop files, by controlling the display of the linked source file’s layers from within Adobe InDesign CS2. A designer can apply different layer visibility overrides to different instances of the same source file. Wise use of this technique
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
41
can reduce the number of images that need to be tracked, transported, and managed, while also giving designers new flexibility and simplified file management. Applying layer overrides in Adobe InDesign CS2 never alters the original layered file; it only affects how the file displays in Adobe InDesign CS2. Files with layer overrides output as they appear on screen, and
Adobe InDesign CS2 includes new tools to identify all files that use layer overrides.
Overriding layer visibility options lets the same file display in three different ways. In the Links palette, eye icons indicate which files use layer visibility overrides.
To control layer overrides while placing a layered file:
1 Choose File > Place.
2 Select Show Import Options, locate a layered file from Adobe Photoshop or Adobe Acrobat, and click Open.
3 In the Image Import Options dialog box, click Layers.
4 Do one of the following:
• In the Show Layers area, click any eye icon to show or hide the imported file’s layers in the Adobe InDesign CS2 document.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
42
• Choose a layer comp from the Layer Comp menu. (If you choose a layer comp and then turn eye icons on and off in the Show Layers area, the Layer Comp menu changes to [Custom].)
5 Choose an option from the When Updating Link menu:
• To let the file’s layer visibility be controlled by the layer visibility settings applied in the program used to create the file, choose Use Photoshop’s Layer Visibility.
• To maintain layer overrides applied in Adobe InDesign CS2 regardless of the settings in the program used to create the file, choose Keep Layer Visibility Overrides.
6 Click OK.
To change layer overrides after placing a layered file:
1 Select the placed graphic, and choose Object > Object Layer Options.
2 Perform steps 3 through 6 in the procedure above.
The Object Layer Options dialog box only operates on individual placed files. When preparing a job for handoff or output, the Links palette and the Preflight command provide a quick document-wide view of where layer overrides are used in the document.
To check for layer overrides using the Links palette:
1 If the Links palette isn’t open, choose Window > Links.
2 Scroll through the Links palette. An eye icon ( ) indicates any graphic that uses layer overrides.
To check for layer overrides using Preflight:
1 Choose File > Preflight. After the preflight operation finishes, the Preflight dialog box
Summary panel displays a count of files that use layer overrides.
2 In the Links and Images panel, select the first image in the list. If the image has layer overrides, they are indicated in the Current Image/Link area below the list.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
43
Files with layer overrides output correctly as long as the layers in the original files are not flattened or changed in a way that invalidates the existing layer override settings (such as deleting a layer that was made visible in Adobe InDesign CS2). Customers and prepress service providers can use the following guidelines to ensure that layer overrides output as the customer expects:
• Use the Links palette or the Preflight command to identify files with layer overrides, and then verify the appearance of those files on the layout (for example, by examining a proof) before packaging the job for handoff to the prepress service provider.
• Don’t flatten the original source files containing layer overrides. If your shop has historically advised flattening imported layered files, be sure to advise customers and staff not to flatten when layer overrides are used. Customers may see this as a positive change, because manual flattening is an extra production step that is not necessary for predictable output in
Adobe InDesign CS2. (During the output process, Adobe InDesign CS2 flattens individual objects automatically, and only when necessary).
• Consistently maintain the layer names, number of layers, stacking order, and layer comp definitions in each layered source file. When these layering attributes are altered in the original file after layer overrides are applied in Adobe InDesign CS2, the link becomes invalid in
Adobe InDesign CS2 and the appearance of the file in Adobe InDesign CS2 may change when the link is updated. This does not create an output issue when the resulting changes in appearance are intentional.
If the customer isn’t using layer overrides, the default behavior of the Place command and the
Object Layer Options dialog box simply preserves the layer settings of imported files as saved by the programs that created them, as in previous versions of Adobe InDesign.
Checking for differences if the file was converted from earlier versions of
Adobe InDesign
In general, opening a document created with an earlier version of InDesign will not cause text to reflow. However, if you open a document from a previous version and start editing text, minor changes in composition may result because it will now be recomposed using
Adobe InDesign CS2. For best results, print InDesign documents using the version of InDesign in which they were created.
If you use Adobe InDesign CS2 to open an Adobe InDesign 2 document containing placed PDF files, the PDF files may output as if printed from Adobe InDesign 2 because the PDF files are not parsed again during the conversion. If a customer still uses Adobe InDesign 2 and frequently places PDF files, you might recommend that they upgrade to Adobe InDesign CS2.
Adobe InDesign CS2 has the ability to export a document in Adobe InDesign CS format, using the Adobe Interchange Format (.INX). You may encounter this format if you work with a customer who uses Adobe InDesign CS2 and your shop has not yet upgraded from
Adobe InDesign CS. As with any situation where a file is saved to an earlier version, features used in the current version that are not supported in the earlier version may be altered in appearance or may not appear. For example, footnotes are an Adobe InDesign CS2 feature that are removed when opening Adobe InDesign CS2 content in Adobe InDesign CS format. As with any cross-version conversions, if you don’t have the version of InDesign that was used to create a document, compare the converted file to the customer’s proof to make sure there aren’t any unexpected changes, particularly regarding text composition.
Checking for differences if the file was converted from QuarkXPress or
Adobe PageMaker
InDesign can convert document and template files from Adobe PageMaker 6.0 or later and
QuarkXPress 3.3 or 4.1x. To convert documents created with QuarkXPress 5 or later, reopen the documents in QuarkXPress and save them in version 4 format. If you convert any file with the intention of creating prepress-quality output, preflight and proof the file to evaluate any changes that may have resulted from the conversion.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
44
When you open a PageMaker or QuarkXPress file, InDesign converts the original file information to native InDesign information. For example:
• Text is converted to InDesign text frames.
• Styles are converted to existing InDesign styles.
• Text and graphics links are preserved and appear in the Links palette. Embedded graphics—those added to the original document using the Paste command—are not converted. For more information on embedded graphics, see “Managing links and relinking imported files” on page 33.
Note: InDesign does not support Object Linking and Embedding (OLE) or Quark
XTensions. Consequently, when you open files that contain OLE or Quark XTensions graphics, those graphics will not appear in the InDesign document. If your
QuarkXPress document does not convert, check the original and remove any objects that were created by an XTension; then save, and try to convert again.
• Color profiles for PageMaker files are converted directly.
• Colors are converted exactly to InDesign colors, except in the following situations: PageMaker HLS colors are converted to RGB colors, and colors from the color library are converted based on their CMYK values; QuarkXPress 3.3 HSB colors are converted to RGB, and colors from the color library are converted based on their CMYK values; QuarkXPress 4.1 HSB and LAB colors are converted to
RGB, and colors from the color library are converted based on their RGB values;
QuarkXPress 4.1 colors from the color library are converted based on their CMYK values.
• All master pages and layers are converted to InDesign master pages and layers.
• By default, a new document (or one converted from QuarkXPress) contains just one layer, called Layer 1. InDesign converts Adobe PageMaker documents differently to accommodate the differences in PageMaker and InDesign layers.
In PageMaker, master page objects on layers always appear behind all objects on document pages. In InDesign, however, master objects on layers appear at the back of each corresponding layer.
• All master-page objects, as well as QuarkXPress guides, are placed on the corresponding InDesign master pages.
• PageMaker document guides are placed on the Default layer in InDesign.
• Grouped objects remain grouped except where nonprinting items are included in a group.
• All strokes and lines are converted to the line styles they most closely resemble.
Custom strokes and dashes are converted to custom strokes and dashes in
InDesign.
For information about other conversion issues, check the support documents on the Adobe website (www.Adobe.com).
To open a PageMaker or QuarkXPress document or template:
1 Make sure that the original application file is closed. To ensure that all links are maintained, copy all linked files to the same PageMaker or QuarkXPress document folder.
2 In InDesign, choose File > Open.
3 In Windows, choose PageMaker (6.5-7.0), or QuarkXPress (3.3 or 4.1x) in the Files of Type menu.
4 Select a file and click Open. If InDesign cannot convert a file or a specific part of a file, it displays a warning describing the reasons it cannot convert it and the results of the conversion.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
45
5 If a warning dialog box appears, do one of the following:
• Click Save to save a copy of the warnings as a text file, and then open the file in
InDesign.
• Click Close to close the dialog box and open the file in InDesign.
Merging raster-based Photoshop DCS and EPS files
Because DCS files are preseparated, it can be a challenge to integrate them into some prepress workflows. InDesign CS2 automatically merges DCS 2.0 files created from Adobe Photoshop, so it’s easier to reuse legacy files. Merging is supported when exporting or printing, including color separation and trapping with the built-in trapping engine. These enhancements are made possible because Adobe InDesign CS2 reads Photoshop DCS and EPS files as images. Reading these file types as images enables two more benefits: their resolution is determined and reported in the Info palette and when preflighting, and Photoshop EPS files can be color-managed if an
ICC profile was embedded.
For an EPS or DCS file to benefit from these enhancements in Adobe InDesign CS2, the file must meet the following requirements:
• The file must be created by Photoshop.
• The file must be an 8-bit file. The CMYK, RGB, and gray color models are supported. It can include spot colors, and it can be a multitone file (such as a duotone).
• A DCS file must not be saved with the Include Vector Data option selected. (Clipping paths are supported.)
• DCS files must conform to the DCS 1.0 or 2.0 specification.
EPS and DCS files not meeting these requirements can still be placed, but they won’t benefit from the enhanced workflow.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
46
Preflighting the document
InDesign has a built-in Preflight command that automates the process of inspecting documents for missing or incorrectly prepared components, such as fonts, or linked graphics and images.
When you Preflight a document (choose File > Preflight), a Summary panel appears. If the document contains problems that require attention before you output the file, you’ll see warning icons
( ).
To view more detailed information, click the panel names to display the Fonts, Links and
Images, Color and Inks, Print Settings, and External Plug-ins panels.
Fonts panel
The Fonts panel displays output-related details and warnings about fonts used in a document.
When you preflight an InDesign document that contains missing fonts (including fonts missing from linked EPS and PDF files), the Fonts panel tells you the first page where the missing font is used. When viewing font information, Embedded fonts are used in EPS files, Incomplete fonts are screen fonts without a corresponding printer font, and Protected fonts can’t be embedded in PDF or EPS files due to licensing restrictions. You can select Show Problems Only to view a concise list of the missing fonts; clicking Find Font opens the Find Font dialog box so you can gather more information about the missing fonts, or replace missing fonts with available ones
(keep in mind that you cannot use the Find Font command to replace missing fonts that are included in imported graphics—they must be obtained or the graphic’s font changed using the application that created it). For more information, see “Managing missing fonts” on page 31.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
47
Links and Images panel
The Links and Images panel displays output-related details and warnings about linked files in a document.
Using the Links and Images panel, you can review the status of the document’s linked graphics, images, text files, and placed PDF files. You can also verify the links for nested DCS or TIFF files inside an EPS graphic if the Read Embedded OPI Image Links option was selected when you placed these EPS files. (Note: Adobe Illustrator doesn’t include OPI comments in EPS files when linked graphics are missing. Before customers save EPS files from Illustrator, they must verify that the Links palette in Illustrator is free of missing links.)
If the linked files have been modified or if they contain RGB image data, a warning appears in this panel, because such files are not suitable for 4-color process separation workflows. (Note:
InDesign can’t detect RGB color data embedded in EPS or PDF files; customers must check for
RGB data before saving files in those formats. RGB data can be detected in Photoshop raster EPS files.)
This panel also includes two resolution indicators to the Links and Images panel. Actual PPI
(pixels per inch) displays the resolution indicated in the original file. PPI is written into the file by the application that created the image. Much more useful is Effective PPI, which indicates if the resolution is sufficient for high-resolution output. If it’s different than Actual PPI, it usually means the image has been resized in the InDesign document. Both resolution indicators contain a pair of values representing horizontal and vertical resolutions, which can help indicate whether an image has been scaled disproportionately. You can quickly check the resolutions of all images by selecting the first image and holding down the down arrow key while watching the Effective
PPI indicator, or by generating a report.
Adobe InDesign CS2 adds a Layer Overrides indicator, to indicate that layer visibility overrides are applied to the selected file. This indicator is a useful reminder to verify that the graphic’s layer overrides appear correctly on the page, before final output. N/A means this indicator is not applicable because no layer overrides are applied. In Adobe InDesign CS2, warnings in this panel are easier to see.
The Preflight command in Adobe InDesign CS2 now indicates comp images downloaded from
Adobe Stock Photos. Comp images don’t have the necessary resolution or rights clearances for final output. The Comp Images icon only applies to Adobe Stock Photos, which are specially tagged to indicate comp status.
Update/Relink: The Update option enables you to select an individual link that is missing or is modified, and then resolve the link status by simply clicking the Update button. If the original path or file name has been altered since the document was last saved, click Relink to locate the missing link.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
48
Repair All: The Repair All option provides a convenient way to resolve all missing or modified links. If the original path or file names have been altered since the document was last saved,
InDesign displays the Find Link dialog box so that you can locate the links and globally resolve missing or modified links.
Note: Links in multiple folders are relinked or updated when each folder is opened using the
Relink command.
Colors and Inks panel
The Colors and Inks panel displays press-oriented details about color usage in a document.
In the Colors and Inks panel you can view the inks specified in the InDesign document, including inks specified in placed EPS and PDF files. The Angle and Lines/Inch values displayed here are based on the optimized screens for the current PostScript printing device selected in the
Print dialog box.
Note that all swatches available in the document are listed, including those in placed graphics.
To list the colors and inks actually in use, delete all unused swatches from the Swatches palette before preflighting (choose the Select All Unused command on the Swatches palette menu and then click the palette’s Delete button).
Print Settings panel
The Print Settings panel displays the settings of the Adobe InDesign Print dialog box applied to the document.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
49
The Print Settings panel summarizes the document’s current print settings. This summary can help your staff to identify differences between customer-supplied laser proofs and those created at your shop.
External Plug-ins panel
The External Plug-ins panel lists third-party plug-ins used to create a document.
The External Plug-ins panel summarizes the usage of any plug-ins that are not included with the retail version of InDesign but were used in the document.
Trapping documents
Trapping in InDesign CS2 works by comparing colors at the ink level instead of at the object level. Ink-level trapping is clearly superior to object-based trapping because it correctly addresses situations where an object contains multiple colors, such as a gradient, as well as objects that cross over areas of different colors.
Trapping can be performed either by InDesign or using the Adobe In-RIP Trapping capability built into many Adobe PostScript 3 RIPs. Both approaches provide access to high-end trapping controls you’d expect to find in post-processing trapping applications, such as the ability to set trapping controls for text and rich blacks and to compensate for custom inks. Adobe In-RIP
Trapping fully traps objects created in InDesign as well as placed images.
Adobe InDesign built-in trapping also traps InDesign objects and placed images, but with certain conditions. Adobe Illustrator files (native format or PDF, but not EPS) are trapped if they were created by Adobe Illustrator 9 or later. PDF files can indicate whether they have been previously trapped; Adobe InDesign traps them only if they were not previously trapped.
Traps are visible only when you print color separations; you cannot see traps simulated on-screen. You specify trapping settings by using the Trap Presets palette.
The Trap Presets palette
Trap presets enable different trap settings to be applied to any range of pages in a document or a book. You can apply trap presets directly to pages while you are viewing them.
You can import trapping presets from other documents, so you may want to configure a file containing the trap presets for the presses you work with, and import them into a customer’s document so that you can quickly apply them to the appropriate pages.
Note: The default trap settings should not be changed except by someone familiar with the press conditions for the job. Additional information about trap options is available in the
Adobe InDesign CS2 User Guide and online Help.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
50
To create or edit a trap preset:
1 Choose Window > Output > Trap Presets.
2 Do one of the following:
• To create a new preset, Alt-click (Windows) or Option-click (Mac OS) the New
Preset button. (If you click the New Preset button without holding down the
Alt/Option key, double-click the resulting new preset to open the Edit Trap Preset dialog box.)
• To edit a preset, double-click a preset in the Trap Presets palette.
3 Specify the following options, and then click OK.
• For Name, type a name for the preset. You can’t change the name of the [Default] trap preset.
• For Trap Width, type values to specify the amount of ink overlap. Adobe In-RIP
Trapping can use values of up to 8 points; values are limited to 4 if you use built-in trapping. Default applies to all colors except black, and Black applies to solid black areas. You control what InDesign considers solid black by setting the Black Color and Black Density options in the Trap Thresholds area of this dialog box.
• For Trap Appearance, specify options for controlling the shape of the outside join of two trap segments and the intersection of three traps. The choices in the Join
Style pop-up menu are the same as in the Stroke palette. The default is Miter, which maintains compatibility by producing the same trapping results as earlier versions of the Adobe Trapping Engine. The End Style controls the intersection of three traps. The default is Miter, which shapes the end of the trap to keep it away from the intersecting object, while Overlap wraps the end of the lightest trap (as defined by neutral density) around the point where the three objects intersect.
• For Images, specify settings that determine how to trap imported bitmap images:
Trap Placement: Provides options for determining where the trap falls when trapping vector objects (including objects drawn in InDesign) to bitmap images. All options except Neutral Density create a visually consistent edge. Center creates a trap that straddles the edge between objects and images. Choke causes objects to
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
51
overlap the abutting image. Neutral Density applies the same trapping rules as used elsewhere in the document. Trapping an object to a photograph with the Neutral
Density setting can result in noticeably uneven edges as the trap moves from one side of the edge to another. Spread causes the bitmap image to overlap the abutting object.
Trap Objects to Images: Ensures that vector objects (such as frames used as keylines) trap to images, using the Trap Placement settings.
Trap Images to Images: Turns on trapping along the boundary of overlapping or abutting bitmap images.
Trap Images Internally: Turns on trapping among colors within each individual bitmap image (not just where they touch vector artwork and text). Use this option only for page ranges containing simple high-contrast images, such as screen shots or cartoons. Leave it unselected for continuous-tone and other complicated images, as it will create bad traps. Trapping is faster when this option is unselected.
Trap 1-Bit Images: Ensures that 1-bit images trap to abutting objects. This option does not use the Image Trap Placement settings because 1-bit images use only one color. In most cases, leave this option selected. In some cases, such as a 1-bit image where pixels are widely spaced, selecting this option may darken the image and slow trapping.
• For Trap Thresholds, type values to specify the conditions under which trapping occurs.
Step: Indicates the degree to which components (such as CMYK values) of abutting colors must vary before InDesign creates a trap. Type a value from 1% to 100%, or use the default of 10%. For best results, use a value from 8% to 20%. Lower percentages increase sensitivity to color differences and result in more traps.
Black Color: Indicates the minimum amount of black ink required before the
Black Width setting is applied. Type a value from 0% to 100%, or use the default of
100%. For best results, use a value no lower than 70%. See “Trapping with blacks and rich blacks” in the Adobe InDesign CS2 User Guide or online Help.
Black Density: Indicates the neutral density value at or above which InDesign considers an ink to be black. For example, if you want a dark spot ink to use the
Black width setting, enter the neutral density value here. Use any value from .001 to
10, but this value is typically set near the default of 1.6.
Sliding Trap: Indicates the percentage difference between the neutral densities of abutting colors at which the trap is moved from the darker side of a color edge toward the centerline, creating a more elegant trap.
Trap Color Reduction: Indicates the degree to which InDesign uses components from abutting colors to reduce the trap color. This option is useful for preventing certain abutting colors (such as pastels) from making an unsightly trap that is darker than either color. Specifying a Trap Color Reduction smaller than 100% begins to lighten the color of the trap; a Trap Color Reduction value of 0% makes a trap whose neutral density is equal to the neutral density of the darker color.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
52
Assigning trap presets
You can assign a trap preset to a document or a range of pages in a document. While it might be easier to apply a trap preset to the entire document uniformly, your workflow may benefit from applying no trap preset to specific spreads where trapping isn’t necessary. Pages with no abutting colors will print faster if you disable trapping on those pages by applying No Trap Preset in the
Trap Presets palette. Trapping doesn’t actually occur until you print the document.
To apply a trap preset:
1 In the Trap Presets palette, choose Assign Trap Preset from the palette menu.
2 For Trap Preset, choose the preset you want to apply.
3 Select the page range to which you want to apply a trap preset. If the range you want isn’t listed, select Range and type one or more ranges in ascending sequence using a hyphen for each range, and separating pages and ranges using commas, or commas and spaces. For example,
2-4, 6, 9-10, 12- is a valid range.
4 Click Assign.
Note: If you click Done without clicking Assign, the dialog box closes without making any changes to the trap assignments. Trap assignments previously made using the Assign button are preserved.
To disable a trapping page range:
1 In the Trap Presets palette, choose Assign Trap Preset from the palette menu.
2 Type a page range and choose [No Trap Preset] from the Trap Preset menu. (There is a possibility that the palette menu may display [No Trap Style] instead, if the document was created in an older version of Adobe InDesign. [No Trap Style] is the wording previously used for [No
Trap Preset] and means the same thing).
3 Click Assign.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
53
Previewing separations, transparency, and overprints
Use the Separations Preview palette to evaluate on screen how a document will color-separate on printed output. You can view individual spot and process color plates or any combination of plates. If you need to make adjustments, you can do so with immediate feedback by editing while separations preview is in effect.
Adobe InDesign previews separations by displaying any combination of the inks defined in the document, such as the cyan plate and the magenta plate. The results display to the monitor using
InDesign’s high-resolution screen display engine, employing transparency where necessary to represent conditions such as overprinting, RGB-to-CMYK conversion, and spot color interactions with transparency. However, trapping is not simulated. The ability to display overprints and ink limits for any combination of plates can make the separations preview capability more useful for evaluation than a laser-printed separations proof. Separations preview is calculated using the ink characteristics for process and spot inks.
On a press, black ink is not 100% opaque. However, when color management is disabled for an
Adobe InDesign document, Black displays on-screen as 100% opaque. This display is not a useful simulation when evaluating how Black interacts with other colors, such as in areas where a rich black is applied. For a more accurate simulation of Black opacity, you can enable and properly configure color management, or you can choose the Desaturate Black command from the
Separations Preview palette menu. Desaturate Black reduces the opacity of the Black plate only.
Desaturate Black is disabled and turned off when color management is on, because simulating
Black opacity is part of the function of color management.
Keep the following tips in mind as you use the Separations Preview palette:
• CMYK plates are always listed even if the job uses only two spot colors. However, CMYK plates are not output if no colors need to be printed on them.
• The Separations Preview palette lists all inks defined in a document, whether or not they are actually used in the document. If you suspect that unused inks are being displayed, choose Select All Unused from the Swatches palette menu and examine the selected swatches
(remember that swatch icons can indicate what kind of color it is, such as a spot). If you want to reduce the number of inks in use, you have two alternatives. You can use the Ink Manager to alias any ink to another ink, or you can delete swatches in the Swatches palette, such as those that the Select All Unused command selects. However, the Ink Manager method has the advantage of not altering the customer’s file. After using either method, you can evaluate the results using the Separations Preview palette.
• You can view the effect of converting spot colors to process and the effect of aliasing a spot ink. Both of these options are available in the Ink Manager on the Separations Preview palette menu. For example, if a customer used three green spot colors where the job specified only one, and you use the Ink Manager to assign the extra green spot colors to a single spot or process plate, the screen will correctly show the ink aliasing you’ve applied. For more information, see
“Ink Manager” on page 87.
• You can’t preview the overprinting effects of built-in trapping or Adobe In-RIP Trapping. Separations preview displays only the effects of overprints applied manually through the Attributes palette or by applying transparency.
• You may want to disallow display performance overrides applied to individual graphics. When you use Overprint Preview, Adobe InDesign uses High Quality Display mode to show graphics at high resolution, except for graphics that have their own display performance settings.
To display the Separations Preview palette:
Choose Window > Output Preview > Separations.
To remove unused colors (so extra inks won’t appear in the Separations Preview palette):
In the Swatches palette, choose Select All Unused, and then click the Delete Swatch icon
(trash can).
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
54
To preview separations:
1 In the Separations Preview palette, choose Separations from the View pop-up menu.
2 View any combination of separations by clicking eye icons to hide or show plates. Clicking the
CMYK eye icon shows all CMYK plates.
To preview areas that are over your ink limit:
In the Separations Preview palette, choose Ink Limit from the View pop-up menu, and enter an ink limit value.
Areas in red are over your ink limit, and areas with more saturated reds are further over the ink limit. Areas in gray are within the ink limit.
Red areas indicate areas over the specified Ink Limit in the Separations Preview palette, and the percentages along the right side of the palette indicate the ink amounts at the location of the pointer.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
55
To view the ink percentage at any point on the layout:
1 Position the mouse where you want to evaluate the ink percentages.
2 Refer to the percentages along the right side of the Separations Preview palette. Ink values for each plate are displayed, along with the total for CMYK plates only.
Note: When you view ink limits for a document that contains both process and spot colors, determine the total ink percentage by adding the CMYK ink percentage to the percentages of each spot color.
To change how single plates display:
On the Separations Preview palette menu, select Show Single Plates as Black to display plates as black when displayed alone, or deselect it to display plates in their actual ink color.
To change how black displays:
On the Separations Preview palette menu, select Desaturate Black to display actual rich black opacity (opacity as combined with other inks), or deselect Desaturate Black to display black as
100% opaque.
Overprint Preview
Overprint Preview is a View menu command that simulates how objects that use the Overprint attribute will appear in color-separated output (or composite output when the Simulate Overprint option is enabled). Overprint Preview is exactly the same as using the Separations Preview palette with all inks displayed, so you can use it as a shortcut for that specific view. When
Overprint Preview is on, you can see underlying objects through overprinted objects as they would appear on press. Because Overprint Preview models ink behavior, overprinted objects that use lighter or screened inks reveal more underlying inks during overprint preview because they actually are less opaque when printed.
Overprint Preview off (left) and on (right), where the text fill and stroke and the wave’s light blue stroke are all set to overprint in the Attributes palette. Because strokes are centered above fill edges, half of each stroke falls outside each fill.
When using Overprint Preview, use the same guidelines listed for the Separations Preview palette on page 54.
To preview overprinting:
Choose View > Overprint Preview.
Note: You can also preview overprints when you output to a composite printing device or PDF file. To do this, turn on Simulate Overprint in the Advanced panel of the Print dialog box or the Export PDF dialog box. Simulate Overprint should be off when creating actual separated output—as its name indicates, this feature is intended for proofing only, and won’t preserve spot colors.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
56
Flattening transparency for high-resolution output
Transparency has been a feature of image editors such as Adobe Photoshop for many years.
The design advantages of transparency are so compelling that customers have long requested a similar capability in vector drawing and page layout programs. While some drawing programs support transparency for a limited range of objects, Adobe supports transparency at a fundamental level so that it can be used for any practical application, from true semitransparent drop shadows to changing the opacity of any object. To make this happen, Adobe includes support for transparency in the Adobe Graphics Manager (AGM) graphics engine to provide high-quality display of transparency effects. Integrated support for transparency enables transparency effects to be preserved from Illustrator and Photoshop files and applied to InDesign objects.
Native transparency or live transparency are terms for the data that describe transparency, such as specifying 25% opacity or a Screen blend mode. However, Adobe PostScript thinks in terms of solid or screened color and grayscale values, with no support for native transparency data.
For this reason, native transparency must be flattened—converted to the ink values required to reproduce the appearance of transparency on press. Flattening can be done by a RIP or by the application generating output data. RIPs are available that can process native transparency data directly, by supporting PDF 1.4 and flattening transparency data in-RIP. But many RIPs in use today can’t process transparency data directly, so before sending them to such a device, documents that use transparency must be flattened in advance.
It may seem that transparency creates a special case for a service provider to handle. However, this situation continues to improve with time. Transparency is already part of the PDF 1.4 and
1.5 specifications supported by Adobe InDesign (starting from version 2), Acrobat (starting from version 5), and Illustrator (starting from version 9). And as noted above, RIPs are available that can receive native transparency. As device manufacturers and service providers upgrade RIPs, software, and workflows, flattening in advance becomes less necessary. Adobe’s goal is to make working with native transparency as routine as it is to work with line screens today (which were a challenge in the early days of desktop publishing).
For devices that don’t yet have the ability to process native transparency, Adobe InDesign includes tools that help you efficiently prepare transparency for high-quality output. The Flattener Preview palette works together with transparency flattener presets so that you can evaluate, customize, and apply them. Also, the Pages palette indicates the spreads on which transparency
(from Adobe Illustrator 9 and up; InDesign, or Photoshop) is used, by displaying those pages with a checkerboard pattern.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
57
How flattening changes the document
At its simplest, the process of flattening changes how overlapping transparency objects are drawn, without changing how they look, so that the document still appears to use transparency but will successfully print on an output device that doesn’t handle native transparency.
To achieve this effect, the InDesign transparency flattener examines the interactions at every point of the transparency and does three things to spreads containing transparency:
1 It cuts the transparent art apart and represents overlapping transparent regions by discrete, abutting elements, each with its own color.
2 It retains the integrity of the original transparent objects as much as possible (e.g., type stays type, vectors stay vectors), but it may rasterize some type or artwork depending on the transparency flattener preset that’s applied.
3 It sets rasterized areas to a resolution determined by the current transparency flattener preset.
Images already present in the document are flattened using the resolution of the highest-resolution image in the document.
Original art with native transparency by cutting up objects
(objects slightly shifted for illustrative purposes)
Flattened art simulates transparency
If a spread doesn’t contain transparency, the flattener leaves it alone.
Note: The transparency flattener in InDesign CS2 preserves overprinting settings except in two cases:
• The overprints are affected by transparency. In this case, flattening takes the overprinting objects into account, resulting in the same output that would happen on a transparencycapable RIP. Discrepancies may occur, however, if the RIP is configured to convert spot colors to process. You can use the Ink Manager to convert spot colors to process colors before printing.
• The Simulate Overprints option is on in the Advanced panel of the Print or Export PDF dialog boxes. Although this may sound contradictory, it isn’t. Overprinting instructions are for separations output. The Simulate Overprints option is intended for proofing overprinting for devices that can’t indicate overprints on composite output. Do not enable Simulate Overprints when sending final composite output to a digital press or print workflow system.
Finding out how a document uses transparency
When you receive an InDesign file from a customer, your approach to handling that file will depend on exactly how transparency was used. Some scenarios don’t require much special handling, while others require careful handling. This section describes how to evaluate an
InDesign file and understand what to do to ensure optimal output.
It’s important to remember that an InDesign document may contain native transparency in more than one way. Transparency can be applied in InDesign or may be present in a file imported from another product that produces native transparency, as indicated below.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
58
To find out how an InDesign document uses transparency:
1 Check the Pages palette. Any pages containing objects with transparency applied will appear with a checkerboard pattern if the transparency is from:
• InDesign 2 or later
• Illustrator 9 or later (native file format only, not EPS).
• Photoshop 4 or later (native file format only).
• PDF 1.4 or later (generated by applications such as Illustrator 9 or later)
The spread containing pages 10-11 displays a checkerboard pattern because transparency is applied to objects on the spread by InDesign or within imported graphics.
2 On pages that contain transparency, you can precisely identify areas affected by transparency by choosing Transparent Objects from the Highlight pop-up menu in the Flattener Preview palette (see “Previewing transparency flattener presets” on page 64).
3 If preflighting indicates that the document contains EPS graphics, ask the customer if any
EPS graphics came from Adobe Illustrator 9 or 10. What you are looking for are EPS files that may have been flattened at the wrong settings for high-resolution output. While EPS graphics from those programs may contain transparency that can be edited by by Illustrator, it will not be detectable as live transparency by InDesign, which sees EPS files as already flattened. Illustrator native transparency is directly supported by InDesign only for files saved in
Illustrator 9 or later native (.AI) format or PDF 1.4 and above. Although the InDesign transparency flattener won’t affect EPS versions of these files, they may output correctly if they were flattened using settings in Illustrator that are appropriate for high-resolution output.
Note: The customer may not be aware of all of the ways transparency is used. For example, transparency can be an attribute of effects (such as drop shadows) and Illustrator brushes.
Once you have an idea of how transparency is used in the customer’s document, you can set up the file for output. You can decide on the proper output settings through a combination of using the Flattener Preview palette (see “Previewing transparency flattener presets” on page 64) and the scenarios below.
No transparency
In the simplest scenario, the customer hasn’t used any transparency in the document. You can output the file without flattening it.
Basic transparency—InDesign transparency only
All transparency in the file was applied using InDesign. In this case, you’ll simply need to use the
High Resolution transparency flattener preset (or your own customized high-resolution transparency flattener preset), and the document is likely to output reliably with regard to transparency.
Moderate transparency—InDesign and unflattened Illustrator transparency
The document contains InDesign transparency and imported files that also use transparency. If the files are saved in the formats listed in step 1 above, the transparency flattener in InDesign can flatten and output the files’ transparency typically without problems.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
59
Complex transparency
A document may require additional attention if it uses transparency and is not one of the formats listed in step 1 above. Such files may require special handling as follows:
• Illustrator files using transparency but saved in formats earlier than Illustrator 9 native
format (.ai). The transparency used in these files has been flattened. The output quality of those files depends on the Illustrator flattener settings that were in effect when they were exported. For these kinds of files, the question is whether or not the flattener settings were appropriate for high-resolution output. If they were flattened using low-resolution or lowquality settings, they may not be suitable for prepress output. Examine high-resolution proofs of pages containing those graphics. If the proofs are not satisfactory, the graphics should be replaced with unflattened Illustrator 9 or 10 native versions of those graphics, if possible.
Additional information about handling Illustrator 9 or later files containing transparency is available at the Adobe website (www.Adobe.com).
• Blend modes. As in Photoshop, blend modes are a form of transparency that affect how overlapping layers visually combine. Adobe InDesign properly handles spot color and transparency in most situations. However, if the Difference, Exclusion, Hue, Color, Saturation, or Luminosity blending modes are used with transparent objects that interact with spot colors, use the
Separations Preview palette to monitor the results more accurately, or achieve the effect using other blending modes or techniques. Using these blend modes with spot colors won’t convert them to process colors, but the nature of these blending modes makes them harder to use with spot colors.
• OPI workflows. Specific steps must be taken to ensure that high-resolution data is present for images that will be handled with an OPI workflow, because flattening occurs before the generation of PostScript. See “Flattening OPI workflows” on page 61.
• Preseparated image data, such as DCS or multitone files. Colors in these files are already assigned to plates, which can be an impediment to flattening. However, transparency is not a problem for most Photoshop DCS 2.0 files because Adobe InDesign CS2 can recombine their plates, integrate them into a layout containing transparent objects, and then reseparate them.
For recommendations on using transparency with files saved in preseparated formats other than Photoshop DCS2.0 format, see “Flattening DCS workflows” on page 61.
• Color management. If color management is in use, it will also affect any color conversions resulting from transparency. This relationship is another reason color management settings must be synchronized with the customer and appropriate for the current workflow; otherwise transparency may result in unexpected colors. Be sure the document’s working color space is set to your intended output device before output. This ensures that transparent objects are assigned suitable in-gamut colors during flattening.
• Partially flattened text. When using the Flattening Preview palette, choose Outlined Text from the Highlight pop-up menu to watch how text areas become flattened. If highlighting indicates that some, but not all, characters in a text frame are converted to outlines, the text may appear inconsistent when output. This situation may occur if a text frame intersects multiple transparent objects in a way that causes different flattening results across the characters in the text block. For these areas, consider applying a customized flattener preset that includes the Convert All Text to Outlines option turned on. This ensures that the text appears consistent across all flattened areas, though small type may appear to be slightly thicker.
Summary
While being in communication with the customer is good practice, it’s especially critical when working with transparency. By helping customers recognize potential trouble spots with transparency, jobs with transparency can move more smoothly through your shop. See “Helping
Customers Prepare InDesign Files” on page 22 for items you may want to add to customer job checklists, such as the issues discussed in this section.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
60
Flattening DCS workflows
Transparency flattening depends on processing objects and colors before output. However, DCS files are typically preseparated, so in many cases the inks cannot be merged and then reseparated. This means transparency may not be compatible with some DCS workflows.
One DCS workflow is much easier in Adobe InDesign CS2: working with Photoshop DCS 1.0 and 2.0 files. Adobe InDesign CS2 can merge most Photoshop DCS 1.0 and 2.0 files during export or output. As a result, you can preview transparency for a Photoshop DCS 1.0 and 2.0 file.
For more information on requirements for merging Photoshop DCS files, see “Merging rasterbased Photoshop DCS and EPS files” on page 46.
When a DCS file is directly affected by transparency in an InDesign layout and it can’t be merged, use Photoshop to convert the file to PDF or native Photoshop (PSD) format before flattening the InDesign document. (Converting to an EPS file is not recommended because the conversion won’t preserve spot colors if any were used in the DCS file.)
Flattening OPI workflows
To accurately calculate transparency flattening at imagesetter resolution, high-resolution image data must be available when flattening occurs. Flattening occurs when exporting or printing, but before PostScript code is generated. Due to this processing order, care must be taken in OPI workflows to make sure high-resolution data is available at output time.
The easiest course of action is also the most reliable:
1 The customer imports high-resolution graphics into the layout, and keeps them with the document so that the high-resolution data is present whenever flattening and output occurs.
2 In the Advanced panel of the Print dialog box, Omit for OPI: EPS option is on, so that the document can function within an OPI workflow.
The presence of high-resolution data doesn’t have to slow down screen display; the Typical
Display and Optimized Display commands under the View menu can display the images using a lower on-screen resolution or replace them on-screen with gray placeholders. The settings used by these commands are user-customizable.
If there is a possibility that the high-resolution images may be replaced with low-resolution proxies with the exact same name (as a result of automatic relinking), use the Links palette to embed the high-resolution images in the file to ensure that they will be present at output time.
If the low-resolution proxy images containing OPI comments are still present when the document is sent to the RIP, the low-resolution data will be present at the flattening stage. This will result in low-resolution output where the low-resolution images are involved. To make highresolution data available to the flattener under this scenario, the customer should replace any images that are directly involved in transparency on the layout with high-resolution versions
before critical flattening and output. The customer doesn’t have to replace all images—just the ones involved with transparency. To save time, you can use the Affected Graphics option in the
Flattener Preview palette to quickly identify the images that need to be swapped out with their high-resolution versions.
A quick way to remember how to manage transparency and OPI is to remember the phrase
“fatten before you flatten,” with “fattening” defined as ensuring that high-resolution images have replaced all low-resolution images before output.
Understanding transparency flattener presets
InDesign CS2 comes with three transparency flattener presets built in. They are optimized for low, medium, and high-resolution output. The flattener controls in Adobe InDesign CS2 are now consistent with Adobe Illustrator CS2 and Adobe Acrobat 7 Professional. Adobe InDesign CS2 defaults to Medium Resolution for fast output on the customer’s desktop printer. In a print service provider workflow, the High Resolution flattener preset is recommended (or a similar preset customized for your workflow) because the results of this preset are most likely to be press quality. Low Resolution should be used only for rough proofing or online output.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
61
While the High Resolution flattener preset is recommended for prepress output, there is a chance that some jobs may encounter output problems if, for example, memory limits are reached or the output resolutions don’t match your workflow. To confirm which settings produce the best results on your equipment, run some test jobs containing transparency, starting with the High
Resolution transparency flattener preset. If you encounter quality or performance issues, you may need to create a customized transparency flattener preset for your shop, as described below.
You can use the Save and Load buttons in the Transparency Flattener Presets dialog box to save your tested presets and then load them on other computers in your shop or at a customer site.
It’s important to understand that the process of flattening transparency can result in either vector objects or rasterized areas, as a consequence of balancing reproduction quality against the speed of flattening. Of course, for service provider output, quality is the highest priority.
To create or edit a flattener preset:
1 Choose Edit > Transparency Flattener Presets.
2 Do one of the following:
• Click New to create a preset.
• To base a preset on a predefined preset, select one in the list, and click New.
• Select a custom preset in the list and click Edit.
Note: You can’t edit one of the default flattener presets, but you can select one as a starting point for a new preset that can be edited to match your workflow.
3 In the Flattener Settings dialog box, type a name in the Preset text box or accept the default name.
4 Drag the Raster/Vector Balance slider only if necessary. In most service provider workflows, there is little reason to use a value lower than 100. Lowering this value enables more rasterization of objects. You might lower this value for very complex pages that cause unacceptably long output times.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
62
Note: The rasterization that occurs depends on the complexity of the page and the types of overlapping objects. InDesign attempts to flatten objects only when necessary. Objects and spreads that aren’t affected by transparency aren’t flattened.
5 Do the following only if necessary:
• Set a Line Art and Text Resolution for artwork that’s rasterized as a result of interaction with transparency (except for gradient objects, which are covered by the next option). This option only takes effect when Raster/Vector Balance is below
100. In most cases, the value should not be changed. If you decide to change it, a good guideline is to start with the minimum acceptable resolution for line art on your output device and work up from there until output quality is as desired.
However, if your goal is quality, start with Raster/Vector Balance set at 100, in which case Line Art and Text Resolution no longer applies.
• Set a Gradient and Mesh Resolution for gradient objects. In general, specify the same resolution used for placed images (typically 300 dpi). InDesign will not necessarily rasterize all gradient objects; it will rasterize only where necessary due to interaction with transparency. InDesign may use this setting to rasterize gradients in placed graphics if the gradients interact with transparency and are saved in a file format that provides native transparency information to InDesign (such as
Illustrator 10).
Note: Do not change this value to improve feathered edges or drop shadows.
InDesign automatically increases the resolution for Feather Width or drop shadow
Blur Width values (in the Feather and Drop Shadow dialog boxes, respectively) that drop below 0.5 points.
6 Select any of the following, and then click OK:
• Select Convert All Text to Outlines to convert all text to outlines throughout the document. Whether or not you select this option depends on how text is used in the document in relation to transparency. If significant areas of text overlap transparent areas, some text may be converted to outlines while the rest of the text is not converted. InDesign attempts to flatten only where necessary. At resolutions below 1200 dpi, the text converted to outlines may appear slightly different than the nonconverted text. This is because the conversion slightly thickens text, and is most noticeable at small type sizes. Selecting this option converts all of the text to outlines, resulting in text that appears consistent.
• Select Convert Strokes to Outlines to convert all strokes in the document to outlines, not just the ones whose objects have transparency.
• Select Clip Complex Regions to decrease the probability of stitching, or jaggies, where rasterized areas meet areas that still remain in vector form. When the
Raster/Vector Balance value is less than 100, complex areas are sometimes rasterized during the flattening process. Typically, areas of the layout are rasterized in rectangular regions that can cut through objects. This can result in stitching.
Selecting Clip Complex Regions decreases the probability of stitching by ensuring that the raster/vector boundary falls along existing objects’ edges. If stitching occurs in PDF files exported from InDesign, turn off Smooth Images in Adobe
Acrobat (in the Smoothing panel in the Preferences dialog box). If the stitching disappears after changing the preferences, it’s only a screen display artifact and typically does not appear in printed output.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
63
Original art Detail of flattened art; stitching is visible starting halfway through the F and in blue area near top
Consider creating and testing your custom preset in advance so that if a job comes through that requires altering the transparency flattener settings, you don’t need to wonder what will work.
Previewing transparency flattener presets
Adobe InDesign CS2 lets you highlight the effects of any transparency flattener preset on screen using the Flattener Preview palette. Because it can take time to calculate the effects of flattening, you control when the display refreshes. When you’re satisfied with the output quality indicated by the flattener preview, you can apply the currently viewed settings to the document’s print output settings by clicking the Apply Settings to Print button.
When you use the Flattener Preview palette, you specify what kind of results you want to see and what flattener preset to apply. The flattener preview displays all objects in the document window as gray except for the areas affected by the settings you specified, which are shown in red. If you want, you can even edit the document while previewing flattening.
Here’s how you might use the Flattener Preview palette with a magazine cover. If you set the
Flattener Preview palette to highlight All Rasterized Regions, you’ll see all areas that must be rasterized to output transparency effects used on the magazine cover. The red highlight may alert you to areas of type that would be rasterized due to the interaction between transparency and the specified flattener preset. Because type must be printed at a high resolution to appear smooth (at least 1200 dpi), you’ll decide that a preset such as High Resolution must be applied to the document (or at least to the cover).
The Apply Settings to Print button changes the flattener settings in the Print dialog box only. If you want to change flattener settings for PDF output, be sure to specify the flattener preset in the
Advanced panel in the Export PDF dialog box. Also note that the Apply Settings to Print button changes the flattener settings for the entire document. If you want to change the flattener settings for one spread (a spread override), you can use the Flattener Preview palette to evaluate alternate settings, but you need to apply the spread override by selecting the spread in the Pages palette and choosing Spread Flattening > Custom from the Pages palette menu.
To display the Flattener Preview palette:
Choose Window > Output Preview > Flattener.
To evaluate the effects of flattening:
1 In the Flattener Preview palette, select an option from the Highlight pop-up menu:
• Rasterized Complex Regions highlights areas that rasterize based on the settings in the transparency flattener preset. When the Raster/Vector Balance slider is set to
100, no areas are highlighted because rasterization only occurs within the outlines of each text or line art object that’s affected.
• Transparent Objects highlights objects that use transparency. It doesn’t indicate any of the possible results of flattening.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
64
• All Affected Objects highlights both objects that use transparency and objects that must be flattened because they interact with the objects that use transparency. This setting does not indicate flattening results, but it’s useful because it indicates all objects that could potentially be flattened.
• Affected Graphics highlights images that will be flattened, but not effects or nonimage objects (such as vector drawings). This setting is especially useful for OPI workflows, because the highlighted images are the ones that must be swapped with high-resolution versions at output time in order to flatten properly. If an image isn’t highlighted, you don’t need to be concerned about flattening it in an OPI workflow.
You can use this setting together with the Info palette to verify the resolution of any highlighted images.
• Outlined Strokes highlights which strokes will be slightly thicker when flattened.
Sometimes strokes are converted into filled areas of the same width to recreate a transparent effect when flattened. These areas may appear thicker because some RIPs process strokes differently than filled shapes, but the effect is usually not visible on device resolutions above 1200 dpi. If you are printing on a device below 1200 dpi and this feature highlights many objects on a page, you can make all strokes appear consistent by applying a preset where Convert All Strokes to
Outlines is turned on.
• Outlined Text highlights which type characters will be converted to outlines under the currently applied transparency flattener preset. Characters become slightly thicker when converted to outlines, but the effect may not be visible on device resolutions above 1200 dpi. If you are printing on a device below 1200 dpi and this feature highlights many characters on a page, you can make all text appear consistent by applying a preset where Convert All Text to Outlines is turned on.
• Raster-fill Text and Regions highlights text or strokes that may be affected by RIPs that record continuous tone (CT) objects at a different resolution than linework
(LW) objects. Affected objects are likely to use transparency effects that create images, such as drop shadows or feathered edges. You don’t need to use this option if you don’t have this type of RIP, or if you have this type of RIP and its version has no issues outputting text or strokes with drop shadows and feathers.
• All Rasterized Regions highlights all areas that will be filled using rasterization because of the current flattener preset—not just complex regions. This option involves rasterization of fills, not outlines, and the rasterized fills are clipped to the original smooth outlines. Again, this view is useful if you output to a RIP that processes CT and LW objects differently because it indicates which parts will appear on the CT page as a result of flattening. It also highlights objects that will be rasterized when the Raster/Vector Balance uses a value less than 100. If many areas are highlighted, you may want to consider using transparency flattener settings with the Raster/Vector Balance set to 100, or increase the Line Art and Text Resolution if you set Raster/Vector Balance to less than 100.
Note: If you don’t want text to rasterize, see if it’s possible to stack the text in front of all other objects, for example, by moving it in front of other objects. If this can be done without changing the look of the design, it may prevent the text characters from being flattened by getting them out from under the transparency objects.
2 Select a flattener preset from the Preset pop-up menu.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
65
3 If Auto Refresh Highlight is off, click Refresh to see the effect of the preset you selected.
The original object is on the left. The flattener preview on the right shows the effect of the drop shadows.
To control preview refresh, do one of the following:
• Click the Refresh button after changing the Highlight or Preset settings.
• Select Auto Refresh Highlight to let InDesign refresh the display after you change Highlight or
Preset settings.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
66
Applying transparency flattener presets
Although you can apply and preview transparency flattener presets at any time, an InDesign document isn’t flattened until it’s printed or exported. A good strategy for flattening is to think from the document level to the spread level. In other words, first apply a flattener preset to the entire document, and then apply other flattener presets as necessary to specific spreads. In this way, you can easily handle special cases without compromising the entire document.
While it might be easier to apply a maximum-quality flattener preset to the entire document uniformly, your workflow may benefit from applying a lower quality flattener preset to specific spreads where precise detail isn’t present. Lower quality flattener presets will process faster and result in smaller output or PDF files.
At the document level, you can apply a transparency flattener preset from the Advanced panel of the Print or Export dialog boxes, or by using the Flattener Preview palette. At the spread level, you use the Spread Flattening command on the Pages palette menu.
To apply a flattener preset to all spreads for print output using the Flattener Preview palette:
1 Make sure the flattener preset you want is selected in the Preset pop-up menu.
2 If you want the preset to apply to all spreads, select Ignore Spread Overrides.
3 Click Apply Settings to Print.
To apply flattener settings as a spread override:
1 In the Pages palette, make sure all pages of the spread are selected.
2 Choose Spread Flattening from the Pages palette menu (click the triangle in the top right corner of the palette to see the menu).
3 Choose any of the following, and then click OK:
• Default to use the document flattening preset for this spread.
• None (Ignore Transparency) to ignore transparency for the spread. This option is useful for troubleshooting.
• Custom to open the Custom Spread Flattening dialog box for specifying settings.
Note: If you know that a customer has applied flattener settings throughout the document, and you know or suspect that their flattener settings may not be appropriate for your workflow, you can easily apply a flattener preset that overrides those set by the customer. In the Advanced panel of the Print or Export dialog box, specify a transparency flattener preset and also select Ignore
Spread Overrides.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
67
Print dialog box reference
InDesign CS2 provides a wide range of printing options. The comprehensive range of options lets you precisely customize printing settings for your shop’s workflow. Once you’ve determined the best combinations of settings for InDesign in your shop, save those combinations as print presets. You may then be able to run many of your jobs simply by choosing a preset from the
Printer Preset menu at the top of the dialog box. Your shop’s goal should be to prepare print presets for the most common types of output so that InDesign files print easily and consistently.
You can change all printer options from the Print dialog box.
Print dialog box overview
A Printer Preset menu
B Printer and PPD menus
C Panel list
D Proxy
E OS printer buttons
(On Windows, only
Setup button appears )
F Save Preset button
G Panel-specific options
A
B
C
D
G
E F
At the top of the Print dialog box are the Printer Preset, the Printer, and the PPD menus.
In the middle of the left side is a list of each panel in the Print dialog box. Just click in the list to switch to another panel, or press Ctrl+up arrow or down arrow. The print dialog box includes the following panels:
• General (page 76). Basic job information, such as page range.
• Setup (page 78). Page fitting options, such as media size and orientation.
• Marks and Bleed (page 82). Options for added items outside the page area, such as printer’s marks.
• Output (page 84). Options controlling color output, such as settings for composite, separation, and trapping.
• Graphics (page 91). Options for downloading fonts and graphics, and the PostScript language data format.
• Color Management (page 93). Options when using a color-managed workflow.
• Advanced (page 95). Options such as OPI image replacement and transparency flattener presets.
• Summary (page 96). Report of all output settings, which you can save to disk as a text file.
Print settings are independently maintained for each document, so that each open document can preserve its own settings.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
68
Common areas
In the Print dialog box, the only area that changes is the area containing options specific to each panel. All other areas of the Print dialog box are common areas that remain visible regardless of the panel you are viewing. In the interest of consistency, options that don’t apply in a certain workflow are dimmed, not removed. If an option is dimmed, but its label is not dimmed, the option does apply but can’t be changed.
Printer Preset, Printer, and PPD menus
The Printer Preset, Printer, and PPD menus are at the top of the Print dialog box because they set the context for the controls in the rest of the Print dialog box. The three menus are interdependent and should be set from the top down.
Printer Preset, Printer, and PPD menus set up the overall printing environment.
The Printer Preset menu at the very top of the dialog box can change any or all print options by applying saved settings that you can customize.
The Printer and PPD menus set up how PostScript is written. InDesign CS2 can output
PostScript that is specific to or independent of PostScript drivers or devices. For more information, see “Setting up PostScript output paths” on page 72.
The Printer menu lets you choose PostScript File or any printer set up in the operating system.
The PPD menu choices are determined by the current Printer menu setting. Specifically, if you have a PostScript printer selected in the Printer menu, the PPD menu will display, dimmed, the
PPD that was set up with that printer by the printer driver (through the Add Printer wizard in Windows or Printer Setup Utility in Mac OS X). This guards against assigning a PPD other than the one properly set up with a particular device. If you or your customers want to create a
PostScript file targeted to a PPD for a printer not connected to the computer, choose PostScript
File on the Printer menu.
For this reason, make sure your output devices are properly set up using the Add Printer wizard
(Windows) or the Printer Setup Utility (Mac OS X). Ensure that your PostScript output devices are set up with the correct PPDs. Once you set up your printers, you don’t have to change them until your workflow or available devices change.
Panel list
Use the panel list to change the options on the right side of the Print dialog box. You can move up and down in the list by pressing Ctrl (Windows) or Command (Mac OS) and the up or down arrow keys, or the Page Up and Page Down keys.
Panel list
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
69
Proxy
The proxy in the lower left corner of the Print dialog box gives you graphic feedback on how well the current job settings fit the selected media. It updates dynamically any time you change a setting that affects the print area required for the job.
Proxy
The proxy has three views. To cycle through the views, click the proxy. The views are as follows:
Standard view: Displays the spatial relationship between the current print settings and the current media (paper) size. It answers the question “What is the page position relative to the media?” It accounts for all options in the Print dialog box that affect the print area requirements of a job, including but not limited to slug area, bleed area, tiling, thumbnails, and scaling. The bleed area is shown in red and the slug area is shown in blue; purple is where they overlap.
Standard view
Text view: Presents the proxy data as text.
Text view
Custom page or cut sheet view: Displays the spatial relationship between the selected media
(paper) size to the paper transport system, including the printable area. It answers the question
“What is the media position relative to the device’s paper transport system?” It also displays indicators for the color output mode and the relationship to the paper transport system. This view displays the effects of the Offset, Gap, and Transverse settings on the media size in relation to the full width of the media; these options are only available when a custom page size is selected.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
70
Custom page or cut sheet view
Device-specific options
The panels of the Print dialog box are designed to accommodate the most commonly needed output options. Some output devices have special options that aren’t available in the Print dialog box panels. You can gain access to device-specific options by clicking the Setup button
(Windows) or the Page Setup and Printer buttons (Mac OS). By providing a consistent user interface for standard output options and also providing access to device-specific options,
InDesign CS2 gives you complete control over output.
Access to device-specific options is available through the buttons to the left of the Save Preset button.
Caution: If you click the Setup button (Windows) or the Page Setup or Printer buttons (Mac OS) and set options in those dialog boxes, be sure you understand how those options will interact with the rest of the Print dialog box, as described below:
• If you will often need to set device-specific options that are not available in any of the Print dialog box panels, save your device-specific settings before running InDesign jobs. You only have to do this the first time you operate a particular workflow.
• Some options appear in both the InDesign print dialog box and the driver-specific dialog box, such as page range, page size, PostScript level, and font downloading settings. When options are duplicated, set the option in the InDesign print dialog box. For this reason, you will typically not need to set options in the Page Setup dialog box.
• If you use a printer driver’s options to print to a file, InDesign passes file-level control to the printer driver. For example, file attributes such as the file name extension will be set by the printer driver code, not by InDesign. However, regardless of how you print, the code that draws the pages themselves is always generated by InDesign.
Mac OS X note: InDesign CS2 does not support the Preview option in the Mac OS X Print dialog box. The Mac OS X Preview option generates a screen-quality PDF that is not suitable for previewing a prepress-quality document. Instead, use any of the high-quality preview options Adobe InDesign provides:
• To preview an output area, use the Preview Mode, Bleed Mode, and Slug Mode buttons at the bottom of the toolbox.
• To simulate how colors appear on an output device, choose View > Proof Setup and then View > Proof Colors.
• To see the layout at high resolution, choose View > Display Performance > High
Quality Display. The next two options also display at high resolution.
• To simulate overprints, choose View > Overprint Preview.
• To simulate color separation, choose Window > Output Preview > Separations.
Cancel button
If you click Cancel, changes you made in the Print dialog box won’t be saved. The only exception is that if you saved settings in a driver-specific dialog box; changes you made there will be saved.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
71
If you want to save changes to the Print dialog box but don’t want to print, consider clicking the
Save Preset button to save the settings as a print preset.
Setting up PostScript output paths
InDesign CS2 provides comprehensive control over PostScript output. You can include or exclude device-specific and driver-specific PostScript code along with the PostScript generated by InDesign. These choices makes it easier to tune PostScript files to match the requirements of your downstream hardware or software. You set up each workflow by choosing the Printer and
PPD in the Print dialog box. The following table summarizes how to set up different kinds of
PostScript output paths; the rest of this section describes each path’s purpose and setup in detail.
TO G EN ER ATE :
Driver- and device-independent PS
Driver-independent, device-specific PS
Driver- and device-specific to device
Driver- and device-specific PS
S E T PR I NTE R M E N U TO :
PostScript® File
PostScript® File
<device name>
<device name>
Click Printer button (or Setup on
Windows) and make sure that a file is targeted
SE T PPD M EN U TO :
Device-independent
<device PPD>
(dimmed, uses printer setup)
(dimmed, uses printer setup)
Any output path that generates PostScript files can be directed to a drop folder for further processing by another workflow application, such as Acrobat Distiller. When you create a
PostScript file, you’ll be asked to specify a folder location; that’s when you can specify a drop folder.
InDesign PostScript file, driver and device independent
PostScript generated by: Adobe InDesign only
Device targeted: None
Implications of this output path:
• Ideal for prepress workflows where the output will be post-processed (for example, imposed or trapped).
• 100% DSC compliant.
• Completely device independent.
• Composite CMYK with spot colors. Colors must be separated and trapped later in the workflow.
• Can only be printed to a file, not directly to a device.
Note: Because this output path is driver- and device-independent, it cannot assume what paper sizes are available at the output device.
To set up an InDesign driver- and device-independent PostScript file:
1 In the Print dialog box, choose PostScript® File from the Printer pop-up menu.
2 Choose Device Independent from the PPD pop-up menu. Device Independent is the first item in the menu.
Printer and PPD menus set up for InDesign device- and driver-independent PostScript output
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
72
InDesign PostScript file, driver independent and device dependent
PostScript generated by: Adobe InDesign only
Device targeted: By PPD only
Implications of this output path:
• Useful for preseparated workflows that will be imposed later, to control Adobe
In-RIP Trapping from InDesign, or to use InDesign’s built-in trapping. In-RIP separations and Adobe In-RIP trapping are available only if you select a PPD that supports them.
• Special printer features supported by the PPD are not available. To use them, use a
PostScript output path that uses a printer driver.
• As DSC-compliant as the InDesign PostScript driver- and device-independent workflow, and able to target a specific device.
• Contains device-specific information for line screens, media sizes, and resolutions.
• Supports all output color modes (composite or separated), including composite
CMYK with spot colors, if you select a PPD that supports these capabilities.
• Can be trapped from InDesign when separations are specified in the Output panel of the Print dialog box.
• Can only be printed to a file, not directly to a device.
To set up an InDesign driver-independent and device-dependent PostScript file:
1 In the Print dialog box, choose PostScript® File from the Printer pop-up menu.
2 Choose a device name from the PPD pop-up menu.
Printer and PPD menus set up for InDesign driver-independent, device-dependent output
AdobePS/PostScript 5 driver PostScript file (Windows)
PostScript generated by: Both Adobe InDesign and the AdobePS printer driver
Device targeting: By a printer preconfigured in the operating system
Implications of this output path:
• Useful if your shop handles all prepress tasks at the RIP, such as when printing to a digital press or when the RIP system is capable of trapping, OPI image replacement, and imposition. Also useful for proofing by the customer. If any prepress tasks are to be done later in the workflow, another output path may be more effective.
• Contains device-specific information for line screens, media sizes, and resolutions, along with support for driver-specific features for a specific output device. This results in more support for direct printing and less compatibility with devices other than the one targeted by the driver.
• Highly DSC compliant. However, not as DSC compliant as the InDesign PostScript file workflows.
• Supports all output color modes (composite or separated).
• Can use InDesign to set up built-in trapping or Adobe In-RIP Trapping.
• Can be printed to a file or directly to a device.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
73
To set up an AdobePS driver- and device-dependent PostScript output path:
In the Print dialog box, choose a printer from the Printer pop-up menu. The PPD menu will automatically display the name of the PPD used to set up the printer. If you want to target a different PPD, from the Printer pop-up menu choose a printer that uses the PPD you want. If an appropriate printer isn’t listed, set it up using the Add Printer wizard.
Printer and PPD menus set up for AdobePS driver-dependent, device-dependent output
Apple driver PostScript® file (Mac OS X)
The Apple Mac OS X printer driver produces PostScript that is DSC compliant and as flexible as the AdobePS output path. The technical implications of this output path are identical to those listed for the Windows AdobePS/PostScript 5 driver workflow above.
To set up an Apple driver- and device-dependent PostScript file on Mac OS X:
1 In the Print dialog box, choose a printer from the Printer pop-up menu.
Printer and PPD menus set up for Apple driver-dependent, device-dependent output
The PPD menu automatically displays the name of the PPD used to set up the printer. If you want to target a different PPD, from the Printer pop-up menu choose a printer that uses the
PPD you want. If an appropriate printer isn’t listed, set it up using the Mac OS X Printer Setup
Utility application.
2 Click the Printer button at the bottom of the Print dialog box, and set the Destination to File.
Specify any other necessary device-specific options as needed, and click Save.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
74
Save as File option turned on in the Apple driver- and device-dependent output path in Mac OS X.
3 Click Print or Save. InDesign is now set up to use the Apple driver to output PostScript to a file.
Note: InDesign CS2 does not support the Preview option in the Mac OS X Print dialog box. The
PDF documents it produces are low-resolution and not suitable for prepress. Instead, use any of
InDesign’s preview features, such as Preview mode, Overprint Preview, Separations Preview, or
Proof Colors.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
75
General panel
The General panel of the Print dialog box contains basic printing options like those available in most Print dialog boxes, plus a few options specific to InDesign.
The General panel controls which pages and objects print.
Note: Some General Panel options are also available in the Print dialog box for the current printer driver, which you can open by clicking Setup (Windows) or Printer (Mac OS X) at the bottom of the Print dialog box. Where options are duplicated, Adobe recommends specifying settings in the InDesign Print dialog box so that they can be saved as print presets, and to minimize potential conflicts and confusion about whether a setting has been made. Click Setup or
Printer only to set device-specific options not available in the InDesign Print dialog box.
Pages area
Copies: Up to 999 copies are allowed.
Collate: Prints the first copy of the entire requested page range before printing a second copy, and so on. When deselected, the specified number of copies of the first requested page are printed, followed by the specified number of copies of the second requested page, and so on. This feature is based on a software collation model (instead of a hardware collation model) in which the collation is being performed by the application as opposed to the device. To improve printing performance, this option is unchecked by default. This option is disabled unless multiple copies are specified in the Copies text box.
Pages: Either click All (the default), or type a page range using hyphens. For discontinuous ranges, you can enter commas and spaces. For example, to print page 1 and then pages 4 through
7, enter 1, 4-7.
You can also specify a page range by section by adding a section prefix and section number before a page range. For example, to print from Section 1, page 2 through Section 2, page 5, enter
Sec12-Sec25.
Reverse Order: Prints the last requested page first and the first last. When deselected (the default), pages are printed in the conventional ascending numerical order.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
76
Note: Some printers print pages face up so that when Reverse Order is selected, the page printing sequence becomes 3-2-1 rather than the original 1-2-3 sequence. This option doesn’t take that into account, so test on your equipment before running a job with it.
Print Master Pages: Prints the master pages and none of the document pages. When this option is on, the Range option is deselected and all master pages are printed, because master pages don’t have page numbers. Printing master pages is mostly useful for designers and art directors. This option should probably be deselected for most service provider scenarios.
Sequence: Prints even pages only, odd pages only, or both (the default). This option is used primarily when printing double-sided output on single-sided desktop printers, so for a service provider this option should usually be set to Both Pages when creating final output or print presets. This option isn’t available when Spreads is selected.
Spreads: Prints all of a spread’s pages on a single sheet of media. This option is usually of more use to designers than to service providers. Selecting this option does not automatically scale or reorient a spread to the selected paper size. To do so, go to the Setup area and adjust the Orientation or Scale options. If you’re proofing, simply choosing Scale To Fit is the easiest solution. If you’re printing final output of spreads, choose a media size that’s large enough for the job.
Options area
Print Nonprinting Objects: Causes InDesign to ignore the Nonprinting option applied to individual objects using the Attributes palette. Ask your customers if they applied the Nonprinting attribute to objects, and confirm whether those objects should print or not.
Print Blank Pages: Prints all pages in the specified range even if they contain no objects. To conserve media, when printing separations this setting never outputs a page of blank plates.
Print Visible Guide and Baseline Grids: Prints margin guides, ruler guides, column guides, baseline grids, bleed area, and slug area, using their colors as specified in the document. For example, if this option is on and the baseline grid is visible, the baseline grid will print, but if it isn’t visible, it won’t print. This option is primarily of use to designers and art directors. Service providers should usually make sure this option is off when creating final output or print presets.
Note: For optimal performance, turn the Print Visible Guides and Baseline Grids option off.
This makes the most difference when spreads containing transparency must be flattened. These options are automatically turned off when you select Separations in the Output panel.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
77
Setup panel
The Setup panel defines the relationship between the page and the output media in terms of size, orientation, and position.
The Setup panel controls the size, orientation, and placement of pages on the output media.
Paper Size area
Paper Size menu: By default, InDesign uses the paper size specified in the default printer style.
The selections available here depend on the type of output you’ve targeted at the top of the Print dialog box:
• If you targeted a device-independent PostScript file (Printer: PostScript® file; PPD: Device Independent), no paper size is available because it will be specified by a post-processing application later in the workflow.
• If you targeted a device-dependent PostScript file (Printer: PostScript® file; PPD: <device name>), you can choose from the paper sizes defined in the selected PPD. The Custom paper size option may also be available if it’s enabled by the selected PPD.
• If you targeted a printer set up through the OS (Printer: <printer name>; PPD: <preset with printer>), you can change the driver-defined paper size by clicking Page Setup to choose a paper size provided by the driver. Or you can choose from paper sizes in the menu supplied by the PPD. The Custom paper size option may also be available if it’s enabled by the selected PPD.
Note: The Custom paper size option is not available for non-PostScript output devices.
Width and Height: Displays the dimensions of the selection in the Paper Size menu. These options can be edited only if Custom is selected. You can specify separate Width and Height values for anamorphic printing, such as flexography. If you select Auto from the Paper Size pop-up menu, Width or Height displays values in parentheses, which indicate that InDesign automatically calculates the minimum paper size needed to output a page with all marks and the bleed and slug areas (if selected), with the goal of conserving continuous roll media.
Orientation: Sets the orientation of the page on the media. This option doesn’t rotate the media.
To rotate media, select a Transverse paper size; or for custom paper sizes, select the Transverse option. If you select the Transverse option, it’s a good idea to switch the proxy to custom/cut sheet view (by clicking the proxy) to verify that the orientation will produce the results you want.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
78
The following options are available only when Custom is selected in the Paper Size menu. The range of values for these options is specified by the selected PPD so that they are within the limits of the output device.
Offset: Sets the distance between the left edge of the media and the left edge of the page.
Gap: Sets the distance between pages on continuous media.
Transverse: Outputs as if the media were rotated 90 degrees, which is useful for tall pages being printed to roll-fed devices that have wide media sizes, such as imagesetters. This option doesn’t change the Orientation, Width, or Height options.
Options area
Scale: Width and Height: Specifies page scaling from 1 to 1000% to a precision of 1/100th of a percent. Width and Height aren’t available if Scale To Fit is selected.
Scale To Fit: Automatically calculates the scaling factor needed to fit the page size within the media, including all enabled page marks that will enlarge the required print area. The original page proportions are maintained. The percentage determined by InDesign is displayed to the right of the Scale To Fit option, except when Spreads is selected in the General panel, because the automatic scaling percentage may vary with the number of pages in a spread.
Constrain Proportions: Maintains the original aspect ratio of the page as you change the Scale
Width or Height. As you change the scaling percentage of one dimension, InDesign automatically adjusts the other dimension to match. The original proportions are maintained when you select Scale To Fit.
Page Position: Specifies where the page and its marks appear on the media. By default, a page is positioned at the upper left corner of the media. By selecting options in this menu, you can also center a page along the horizontal or vertical dimension of the media, or along both dimensions.
The page position is relative to the entire media size, not its imageable area. This option isn’t available when tiling, thumbnails, or Scale To Fit is on.
Thumbnails: Outputs from 2 to 49 pages on a single media page, for the purpose of reviewing a document. In most service provider scenarios, this option should be turned off.
The orientation of the thumbnail pages may not match the orientation of the document because
InDesign automatically uses the orientation that most efficiently fits the thumbnails on the media. For example, when the 1x2 option is selected for a document with tall pages and the original orientation is Tall, the pages will fit best if page orientation is Wide.
A B C
To conserve media, InDesign automatically chooses the orientation for thumbnails. In this example, 1x2 thumbnails laid out as tall pages (A) will print more efficiently with wide orientation (B) than with tall orientation (C).
Tile: Enables printing a page that is larger than the largest available media size, by printing portions of the page on each of multiple sheets of media. Tiling marks are added to each sheet.
When Tile is selected, the Tile menu provides the following options:
• Auto. Automatically calculates the number of sheets required to print the document, using the
Overlap value. Tiles are aligned to the top and left edges of the total imageable area of all sheets that need to be printed.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
79
• Auto Justified. Automatically calculates the number of sheets required to print the document, using the Overlap value as a minimum. Tiles are aligned to all edges of the total imageable area of all sheets that need to be printed, which may result in a larger overlap than specified. The advantage of this option is that you won’t have to trim excess empty space from the tiles along the right and bottom sides of the complete print area.
• Manual. Prints a single tile. You set the top left corner of the tile by positioning the zero point of the rulers. The Overlap value isn’t available for Manual because only one sheet is printed.
• Overlap. Specifies how much of each tile edge is repeated along the edge of any adjacent tiles.
This option defaults to a value of 9 picas.
Auto Auto Justified Manual
Tiling options: Auto tiles from the upper left corner using the Overlap value. Auto Justified fits to outer printable edges of media by increasing overlap. Manual lets you set the position of each tile individually.
Note: Tiling adds tile marks to each sheet. This adds to the total print area required to output all sheets.
Creating a custom page size
The unit of measure for a custom page size is the one specified in the InDesign Edit > Preferences dialog box. You can override the units by using standard abbreviations as described in the online
Help file (for example, enter 12i or 12" for 12 inches, or 612pt for 612 points).
To create a custom page size:
1 In the Print dialog box panel list, click Setup.
2 Choose Custom from the Paper Size menu. The Custom option is available only if custom paper sizes are enabled in the device’s PPD.
3 Specify a Width and Height if needed. The default Auto setting is useful for continuous media, such as a roll of film or paper. It will use only enough media to print the page and any page marks that are turned on.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
80
4 Specify the following options as necessary:
• Orientation, to rotate the page.
• Offset, to specify the distance between the left edge of the media and the left edge of the page.
• Gap, to specify a space between pages on continuous media.
• Transverse, to rotate both the page and media for devices that have wide media sizes, such as imagesetters.
To see a visual indication of these options, click the proxy in the lower left corner of the Print dialog box until it displays the custom size/cut sheet view. The thumbnail updates automatically as you change the values.
Offset Gap Transverse All
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
81
Marks and Bleed panel
This panel specifies items that expand the required print area beyond the page edge, such as crop marks and the bleed area.
The Marks and Bleed panel controls items that print outside the trim size of the page.
Note: InDesign does not automatically scale down the page to accommodate printer marks unless Scale To Fit is selected, so be sure the paper size is large enough to accommodate the page plus all printer’s marks. If the paper size’s imageable area isn’t large enough, printer marks may be cut off or not appear at all. You can use the proxy to monitor whether or not there is enough room for page marks. If you want the paper size to scale to the media size (allowing for printer marks), choose Auto from the Paper Size pop-up menu in the Setup panel.
Paper size too small for the page and the printer marks (left), and paper size large enough to accommodate the page and the printer marks (right).
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
82
Marks area
Printer’s marks
A Color bars
B Bleed marks
C Crop marks
D Registration marks
E Page area
(shown in gray for illustrative purposes)
F Slug area
A
B
C
D
E
F
Printer marks 1 07/16/01, 6:03 PM
All Printer’s Marks: Turns all printer’s marks listed below this option on or off. If this option doesn’t appear fully on or off, it means that some marks are on and some are off.
Crop marks: Adds fine horizontal and vertical rules that indicate where to trim the page.
Bleed marks: Adds fine rules that indicate the amount of extra area to image outside of the page size, to ensure that page items will be visible all the way to the edge of the page after trimming.
Registration marks: Adds target graphics that assist in aligning color separations.
Color bars: Adds two bars of gray and color squares in representative increments to the top of each page, as a guide in adjusting ink density on a printing press. When you output to separations, separation bars also appear.
Page Information: Adds the file name, page number, current date and time, and the name of the color separation to the bottom of each page.
Note: If Page Information is on, the font required to print this information is always downloaded, regardless of the Download Fonts setting.
Type: Specifies what kind of page marks to print. By default, only the Default option is available.
Weight: Sets the weight of the crop and bleed mark lines.
Offset: Specifies an amount of space between the edge of a page and the page marks, with a default of 6 points.
Bleed and Slug options
Use Document Bleed Settings: Applies the bleed values specified in Document Setup instead of specifying them here.
Bleed: Specifies the amount of bleed on each side of the page. The four options are labeled Top,
Bottom, Left, and Right when Spreads is selected or Facing Pages is deselected in the Document
Setup dialog box. The options are labeled Top, Bottom, Inside, and Outside when Facing Pages is selected. If you want to specify the same value for all sides, click the Link icon ( ) to make all four values identical, and then enter a value in any box.
If page marks are on, they always print even if a bleed value is zero because the bleed value only affects how far objects on the layout print beyond the page edge. However, when bleed is set to zero, trim marks and bleed marks print on top of each other and may be hard to distinguish.
Include Slug Area: Adds the slug area (specified in Document Setup) to the total output area.
When deselected, the slug isn’t printed—the job will print to the edge of the bleed area.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
83
Output panel
This panel provides control over color separation. Most of its options are available only when a PostScript printer is targeted. If a non-PostScript printer is targeted, the Color menu, Text as
Black option, and Simulate Overprint option are available, but others are not.
The Output panel controls how color is sent to the output device.
In-RIP separations and Adobe In-RIP Trapping are available in the Output panel. For information about RIPs that support Adobe In-RIP Trapping, contact the following Adobe OEM partners who have licensed Adobe In-RIP Trapping: Agfa-Gevaert N.V., Fuji Photo Film Co., Ltd.,
Heidelberger Druckmaschinen, Information Presentation Tech, Inc., Monotype Prepress, and
RIPit Computer Corporation.
Color: Determines how document color is sent to the printer, using the following options:
• Composite Leave Unchanged. Sends output but doesn’t convert color to the color space of the output device. Useful if you want all color conversion to be done by the device or if you want to send CMYK and RGB data to the output device.
• Composite Gray. Sends grayscale output. Any colors are converted to their gray equivalents.
Useful for sending output to a composite black-and-white printer, such as a desktop laser printer.
• Composite RGB. Sends full-color composite RGB output. Useful for sending output to RGBbased output devices such as inkjet printers or film recorders.
• Composite CMYK. Sends full-color composite CMYK output. Useful for sending output to proofing devices or other composite CMYK workflows. Note that this color output mode converts spot colors to process colors in a composite environment, but preserves spot colors if the PostScript output from this mode is processed in a separations environment. RGBto-CMYK conversion is determined by the color management settings, if enabled. If color management is off, conversion is performed using the Apple RGB profile as the RGB color space and the Photoshop 5 Default CMYK profile as the CMYK color space.
• Separations. Sends output as CMYK separations, plus any spot colors. Useful for output destined for a printing press or other preseparated CMYK-based workflows. This is an on-host or built-in separations mode.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
84
Note: For placed PDF or EPS files, the Separations color mode can separate images using the
CMYK, grayscale, or monochrome color modes only. If a document contains special color spaces, such as RGB or Lab in placed PDF or placed EPS files, separation of these files may not be optimal if performed by InDesign. For best results, open the files in the application used to create them and convert them to a color mode supported by built-in separations. The In-RIP
Separations color mode is not subject to this limitation.
• In-RIP Separations. Sends output as composite CMYK and spot color data optimized for separation at the RIP. This option is available only if the targeted device supports in-RIP separations. In-RIP separations require a PostScript 3 output device, or a PostScript Level 2 device using a RIP that supports in-RIP separations. You also need a PPD that supports this device and a compatible Adobe PostScript printer driver.
Additional important notes about output color modes:
• Composite color output modes do not alter the color spaces of graphics that use non-CMYK color spaces. For example, printing an RGB EPS in Composite Gray mode does not convert the
EPS to grayscale mode.
• In most cases, InDesign only creates separations that actually contain objects. If a page contains only a magenta box, only the magenta separation will be output.
• When the thumbnail is in custom size/cut sheet view, an icon in the bottom left corner indicates the output color mode.
Composite Gray Composite RGB Composite CMYK
CMYK separations
In the proxy, the small icon in the bottom left corner indicates the output color mode.
Text as Black: Prints text as black whenever it has a value that is not None, Paper, or a 0% tint. This option is intended to ease proofing of text and should be turned off for most service provider scenarios. It’s available only for composite output of text created within InDesign. It has no effect on text in imported graphics or on text which has been converted to outlines.
Trapping: Sets up trapping for workflows involving color separation. The Trapping menu includes the following options:
• Off. Applies no trapping. This setting is automatically applied when composite output is specified, because trapping is only relevant to color separations.
• Application Built-In. Creates traps as separations are output, using the trapping engine included with InDesign (also known as the on-host trapping option). It does not trap placed
EPS files unless they are Photoshop DCS 1.0-2.0/EPS raster images; Adobe In-RIP Trapping doesn’t have this limitation. If a document uses stroked TrueType fonts, better results can be obtained using Adobe In-RIP Trapping or by converting the type to outlines (select the type and choose Type > Create Outlines).
• Adobe In-RIP. Sends color data that can be trapped at the RIP. This option is available only when In-RIP Separation is selected in the Color menu and the targeted device supports Adobe
In-RIP Trapping.
Note: The Resolution option available before version 2 of InDesign is not available in InDesign 2 or later. This option was used to calculate resampling of images. Now, resampling of one-bit images is based on the resolution provided by the Adobe Graphics Manager (AGM), which is usually obtained from the device PPD. Resampling of grayscale and color images is now based
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
85
on the current screen ruling. Note that all resampling is controlled by the setting of the Send
Data option in the Graphics panel of the Print dialog box. In the Send Data popup menu, the All option does not resample and the other options do.
Flip: Creates a mirror image of each page for the purpose of producing emulsion that faces in the desired direction. Flip options are not available for non-PostScript printers and device-independent PostScript files. The following flip options are available:
• None. Doesn’t change the output. This is the default setting.
• Horizontal. Reflects pages across the vertical axis; text becomes wrong-reading.
• Vertical. Reflects pages across the horizontal axis; text becomes upside-down and wrongreading.
• Horizontal and Vertical. Reflects pages across both axes. The result is the same as rotating a page 180 degrees.
Negative: Inverts the polarity of pages so that black objects are white, and vice versa. Usually used to produce film negatives. This option is available only for color separation and composite grayscale output. This option uses a setpagedevice method, not a transfer function; so if your RIP uses custom screens for negative printing, InDesign will use them.
Screening: Specifies the combination of screen ruling (in lines per inch) and resolution (in dots per inch) for output. The settings in this menu depend on whether composite or separations output is specified:
• For composite output, a Default setting is available. This option simply uses the device’s default settings, because most desktop color devices don’t provide control over the line screen used by each ink.
• For separations, available settings are provided by the targeted device’s PPD, and the Default option is not available.
InDesign CS2 uses only the screen and resolution combinations described above. If you want to use an unlisted combination, add it to a customized copy of the device’s PPD.
Inks area
Use the options in the Inks area to control how document color swatches are translated into printing inks. This area includes the Ink Manager, which can simplify ink management at output time without altering the original colors of objects.
The Inks area of the Output panel lists the plates to be generated at output time and their status.
Inks list: Displays all inks and indicates their output status. This list may show fewer inks in a different order than that originally generated by the document’s color swatches if you’ve used the
Ink Manager to reassign inks (through ink aliasing). In other words, the Inks list is filtered by the Ink Manager.
Print icon: ( ) Indicates that the ink will be printed.
Frequency: Sets the screen ruling, in lines per inch, for the selected ink’s halftone dot screen.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
86
Angle: Sets the angle in degrees, at which the selected ink’s halftone screen is rotated.
Simulate Overprint: Enables overprints to be simulated on desktop proofing devices. This option should be off for final output because it is intended for proofing only. This option isn’t available when you select the Composite Leave Unchanged output mode.
Ink Manager: Click to open the Ink Manager dialog box.
Ink Manager
Use the Ink Manager for direct control over the output of each process color separation or spot color overlay. A key feature lets you use ink aliasing to quickly change the relationship between a document’s spot colors and the ink plates generated during color separation or PDF export, independent of the Swatches palette. Changing the ink-to-plate relationship is useful when the customer’s document contains more spot inks than they’ve arranged to print. Without the
Ink Manager, reassigning extra spot colors to print on other plates or converting spot colors to process is not easy. It can require altering the colors in the Swatches palette or in the original versions of placed graphics, which carries the risk of causing unexpected changes in the customer’s design. The Ink Manager provides a sensible solution—you can reassign inks for separations, while original colors are left alone.
You can use the Ink Manager dialog box to reassign spot colors to process separations.
The Ink Manager includes an inks list and options for each ink. The ink options let you reduce the total number of plates by making a spot ink output on another spot or process color plate, or by converting a spot ink to its closest approximation in process color inks. You can’t assign a process ink to another process ink.
Ink list: By default, the ink list contains all inks from the point of view of the Swatches palette.
For example, if a document defines 15 spot colors and also uses process colors, the inks list will contain all of the spot inks, plus the four process inks, or 19 inks total.
Note: The Ink Manager ink list includes all spot inks defined in the Swatches palette, not just the inks actually used by objects in the document. If the inks list contains more inks than expected, the document may contain unused colors. You may want to discuss this with the customer. If necessary, you can reduce the number of plates by using the Ink Alias option (which doesn’t alter colors assigned to objects), or by removing unused swatches using the Swatches palette (which may alter colors assigned to objects).
Except for the ink name, each property displayed in the ink list can be changed in the options area below the ink list. Each ink in the list displays the following properties:
• Ink status icon. Indicates whether the ink is set to be separated as a spot ( ) or process ( ) color. Also indicates whether the ink is aliased to another ink ( ).
• Ink name. Displays the ink name supplied by the Swatches palette.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
87
• Type. Indicates the trapping characteristics of the ink. The ink types are defined in the Ink options area below.
• Density. Indicates the neutral density of the ink. This option is described in more detail in the
Ink options area.
• Sequence. Indicates the ink’s position in the trapping order for inks. This option is described in more detail in the Ink options area.
Ink options: This section displays the options for the currently selected ink in the list.
• Type. Indicates the trapping characteristics of the ink. An ink can be one of four ink types:
Normal for traditional process inks and most spot inks.
Transparent for clear inks to ensure that underlying items trap. Use this option for varnishes and die lines.
Opaque for heavy, nontransparent inks to prevent trapping of underlying colors but enable trapping along the ink’s edges. Use this option for metallic inks.
OpaqueIgnore for heavy nontransparent inks to prevent trapping of underlying colors and to prevent trapping along the ink’s edges. Use this option for inks that have undesirable interactions with other inks.
• Neutral Density. Indicates the neutral density of the ink. If trapping is on, this value is used by the selected trapping engine to calculate trapping requirements. You can adjust the ink neutral density (ND) values that the selected trapping engine uses to determine the precise placement of traps. The default ND values for process inks are based on the neutral density readings of process ink swatches that conform to industry standards in different parts of the world. For example, the ND values for the U.S. English and Canadian versions of InDesign conform to the Specifications for Web Offset Publications (SWOP) solid ink density values published by the Graphic Arts Technical Foundation of North America. The Density option in the lower half of the dialog box lets you adjust a process ink’s neutral density to match printing industry standards in a different part of the world. See “Adjusting Neutral Density” below.
• Sequence. Indicates the ink’s position in the trapping order for inks. In most cases these settings should only be changed after consulting the press operators.
Note: The ink sequence option does not affect the order in which separations are output, and it has no effect on the order of inks on press. It only describes the ink sequence to the trapping engine for the purpose of calculating traps.
• Ink Alias. Specifies a different spot or process ink on which to print the objects using the selected spot color, providing a way to assign one spot color to output on another plate. For example, if a customer’s document contains process colors and three spot colors, but the job is supposed to run as four process inks plus one spot ink, objects using the two extraneous spot colors can be assigned to use the correct spot ink (or even a process ink) using the Ink
Alias menu. You can assign any spot color to any spot or process ink, but a process color can’t be aliased to any other ink. If the All Spots to Process option is on, it overrides all ink aliases by definition. You can change ink aliasing settings at any time, because they affect only the output. Ink aliasing has no permanent effect on original document colors.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
88
The spot color Blue 3 is aliased to the PANTONE 2728 C ink. All instances of Blue 3 will now output on the
PANTONE 2728 C plate. The color swatches in the document are otherwise unchanged.
Note: Ink aliasing is among the settings that can be previewed on-screen when you use the
Separations Preview palette.
• All Spots to Process. Subjects all spot colors—regardless of status—to separate into their process color equivalents. It’s available only when spot colors are defined in the document. (To convert an individual spot color to process, click the Ink Status icon for the spot color [ ] so that it changes to a Process Color icon [ ].)
• Use Standard LAB Values for Spots. Affects conversion between spot and process colors.
Historically, spot color swatchbooks contained CMYK values for converting between spot and process color, but many newer swatchbooks also list values in the LAB mode, which provides higher accuracy and a wider gamut. By default, this option is off, which makes
Adobe InDesign CS2 use the same CMYK equivalents as earlier versions of Adobe InDesign.
When this option is on, Adobe InDesign CS2 uses LAB values for spot color conversion, if available. If your workflow depends on the traditional CMYK equivalents, leave this option off.
Note: When you use Ink Manager in the Export PDF dialog box, the Type, Neutral Density, and
Sequence options don’t affect the PDF file. All other Ink Manager options are supported.
Adjusting neutral density. The default ND values for a spot color are derived from its CMYK equivalent. For most spot colors, the ND values of their CMYK equivalents are accurate enough for proper trap creation. Spot inks that are not easily simulated using process inks, however, may need their ND values adjusted so that the trapping engine traps them correctly. By typing new values, you can ensure that an ink that is observed as darker or lighter is perceived that way in
InDesign; the appropriate trap placement is then applied automatically. Changing the neutral density for a spot color only affects how that color will trap. It does not change the appearance of that color in your document.
Note: Neutral Density values should not be changed without consulting the press operators.
The default values are appropriate for most jobs using standard inks. You may want to note the current values before changing them, because there is no way to reset them to the defaults after they are changed (except for clicking Cancel in the Ink Manager). If you need to reset the neutral density values to their defaults, use the settings in the following table.
D E FAU LT N E UTR AL D E N S IT Y S E T TI N G S
Process Cyan
Process Magenta
0.61
0.76
Process Yellow
Process Black
0.16
1.7
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
89
To change the default neutral density settings, do so when no documents are open. Do this by choosing Ink Manager from the Swatches menu, because you cannot choose the Print command when no documents are open.
You can enter neutral density values within the range of .001–10. Use the following guidelines for adjusting neutral density values:
• Metallic and opaque inks. Metallic inks are usually darker than their CMYK equivalents, while opaque inks obscure any ink beneath them. In general, you should set the density values for both metallic and opaque spot colors much higher than their default values to ensure that these spot colors won’t spread. It’s also a good idea to set the metallic density to a higher value than that of Black so that Black does not spread into the metallic spot color.
• Pastel inks. These inks are normally lighter than their process equivalents. You may want to set the density value for these inks lower than their default values to ensure that they do not spread into adjacent darker colors.
• Other spot inks. Some spot colors, such as turquoise or neon orange, are significantly darker or lighter than their CMYK equivalents. You can determine whether this is the case by comparing printed swatches of the actual spot inks to printed swatches of their CMYK equivalents. You can increase or decrease the spot ink’s density value as needed.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
90
Graphics panel
The Graphics panel controls output of fonts, linked graphics, and the PostScript level.
The Graphics panel controls how page data is sent to the output device.
Images area
Send data: Determines how linked image data is sent. Useful for omitting images for printing proofs or for some production workflows.
The Images area contains the following options:
• All. Sends all image data from placed bitmap images. This option is the default setting; it’s typical for final output on a high-resolution device. It may slow printing when proofing highresolution jobs to low-resolution devices because it may send more data than needed.
• Optimized Subsampling. Sends enough bitmap image data to print the graphic at the best resolution for the output device. If you expect to print proofs to devices of various resolutions, this option will save time by sending no more data than needed. It does not send too little data
(unless the images themselves lack the resolution for the output device).
• Proxy. Sends screen-resolution data of placed images. Useful when image detail is not important, such as for FPO-quality proofs. Printing will be faster than Optimized Subsampling.
• None. Replaces each placed graphics frame with a large X, resulting in the fastest possible print speed. In a service provider context, this setting may be useful for troubleshooting jobs by helping to determine whether images are causing a problem. Also useful for proofing copy.
Fonts area
Font settings may appear in both the printer driver and in the InDesign CS2 Print dialog box
(see “Device-specific options” on page 71). If you see font downloading options in the printer driver (when you click the Printer button at the bottom of the Print dialog box), for best results use the settings in the InDesign CS2 Print dialog box as described here.
Download menu: Specifies how InDesign sends fonts required to print the document.
• None. Downloads only the references to the fonts. This is the appropriate option to choose if the fonts reside in the printer and you are certain that the printer-resident fonts are exactly the same version as the fonts on the host computer.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
91
• Complete. Downloads all fonts for the publication at the beginning of the print job, rather than page-by-page.
• Subset. Downloads to the printer only the characters (glyphs) used in the document. Glyphs are downloaded once per page. InDesign sends each font subset under its own name in the
PostScript stream, preventing unwanted font substitution. Font subsets are also slightly more efficient because they are smaller than sending down entire fonts. This can prevent output errors on devices with limited memory. By default, Adobe InDesign CS2 subsets any font containing over 2000 glyphs, such as some Asian fonts. If you want to specify a different limit, change the Always Subset Fonts With Glyph Counts Greater Than preference in the General
Preferences dialog box. Below the preference value, Adobe InDesign CS2 embeds only the subset of glyphs that are used in the document.
Download PPD Fonts. Downloads all fonts required for printing, even if those fonts reside in the printer. If there is duplication, the fonts on the computer override the fonts on the printer.
This option is useful in the following cases:
• The character set of the printer-resident version doesn’t match that of the computer version. An example is when the font on the computer is a TrueType font and the font on the printer is a
Type 1 font.
• Character outlines must be exact for trapping purposes, but there is doubt that the outlines at the printer match the outlines used in the document.
• The PPD is inaccurate.
This option is usually not needed for draft printing on a desktop printer unless extended character sets are in use. This option is disabled if None is chosen in the Download drop-down list.
Other graphics options
PostScript options may appear in both the printer driver and in the InDesign CS2 Print dialog box (see “Device-specific options” on page 71). If you see PostScript options in the printer driver
(when you click the Printer button at the bottom of the Print dialog box), for best results use the settings in the InDesign CS2 Print dialog box as described here.
PostScript: Specifies the job’s PostScript compatibility level. This should be set to be compatible with the output device or post-processor application that will receive the job. The PostScript menu contains the following options:
• Level 2. Outputs jobs with speed and quality when printed to devices supporting PostScript
Level 2 or higher.
• Level 3. Outputs jobs at the best speed and quality, but requires a PostScript 3 RIP. This option is not available if you targeted a PPD that only supports PostScript Level 2.
Data format: Specifies whether InDesign sends PostScript data as hexadecimal or binary data
(including gradients and fonts). Note that support for binary printing can vary depending on the printer driver. The Data Format menu contains the following options:
• Binary. Sends PostScript to the printer as binary code, which is more compact (and therefore faster) than ASCII, but which may not be compatible with all systems. This option is an appropriate choice for shops where up-to-date hardware and networks are in use. Note that Mac
OS X 10.2 does not support binary printing, so the only data format available for Mac OS X is
ASCII unless you select PostScript file as the Printer and Device Independent as the PPD. (You may see a Binary option in other applications under Mac OS X 10.2, but it is likely that the data is actually being sent as ASCII.)
• ASCII. Sends PostScript to the printer as text. ASCII encoding represents each binary byte of data as two hexadecimal bytes, roughly doubling the size of the data and resulting in slower printing. Use this option when older networks, parallel printers, and multiple platforms cause problems for binary data.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
92
Color Management panel
The Color Management panel provides control over color-managed jobs. Options in this panel are available only if color management is enabled in Edit > Color Settings.
The Color Management panel controls how document colors are sent to the output device.
Even when color management is on, some color management options may be unavailable if the targeted device doesn’t support the options. In the device-independent output path shown above, the target device is intentionally unknown.
Print area
Options in this area define the color space within which the document colors are prepared for output. The Print area contains the following options:
Document: Prepares to send document colors in the document’s working color space as specified in the Edit > Color Settings dialog box. If the document working space is already set correctly, it’s usually correct to leave this setting at the default.
Proof: Prepares to send document color after translating it into the color space currently selected in the View > Proof Setup menu. This is usually used for special cases only, such as when the colors to be sent are different from both the working color space and the output device. A common example of using the Proof option is simulating the document’s current Proof Setup
(such as newsprint) on a proofing device with a larger gamut than the press (such as an inkjet printer). By setting the Proof profile to the profile of the final output device and setting the
Printer Profile to the proofing device, the document is represented in the gamut of the device being proofed before being sent to the proofing device. Using this feature, proofing newsprint on an inkjet printer prints the job accurately, using only the colors within the gamut of newsprint.
Options area
This area defines the color space within which the source space colors will be sent to the final output device. The availability of options depends on the selected printer driver and the color management settings for the document. The Print Space area contains the following options:
Color Handling: Specifies whether the colors will be adjusted for the output device by InDesign or by the output device. In most cases, choose Let InDesign Determine Colors, so that InDesign uses its own color management to perform any necessary color conversion for the final output
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
93
device. A reminder (blue balloon) appears if additional settings are recommended to prevent accidental situations such as double color management; move the mouse over the balloon to read the reminder at the bottom of the panel. When printing to an Adobe PostScript printer that supports PostScript color management, the PostScript® Printer Determines Color option is available in the pop-up menu; this lets the output device perform the color conversions.
Printer Profile: Specifies the color space within which the source space colors will be sent to the output device. Set the Printer Profile to match your final output device, even if it’s different than the CMYK profile of the document. To maintain the color values of CMYK objects, make sure Preserve CMYK Numbers is selected. These CMYK options don’t affect RGB objects, which are converted to CMYK according to the current color management settings. CMYK objects are preseparated for a specific set of printing conditions. If the printing conditions of the Document
CMYK profile are significantly different than on the CMYK device represented by the Printer
Profile, you may want to make sure that customers are aware of and comfortable with the differences, or see if other profile settings are appropriate.
Output Color: Indicates how the color is being sent to the output device; this reports the setting of the Color pop-up menu in the Output panel, which determines the availability of other options in this panel. In addition, the Preserve CMYK/RGB Numbers and Simulate Paper Color options may be available if composite output is specified. Select Preserve CMYK/RGB Numbers to maintain the original color values of objects without profiles and to convert objects with embedded profiles to the Destination profile. This option is useful for protecting the preseparated color values of CMYK images. If you choose PostScript® Printer Determines Color as the
Color Handling setting, you’ll typically want to select Preserve CMYK Numbers.
Note: All options are not always applicable to all output scenarios, so the availability and labeling of options in this area depends on the combination of settings you make in the Printer pop-up menu, the Color pop-up menu in the Output panel, and the setting in the Print area of this panel.
For example, if the selected Printer is an imagesetter and you set the Color pop-up menu to
Separations, CMYK device profiles appear in the Printer Profile pop-up menu, and RGB profiles are not shown. If you target a desktop inkjet printer that uses a non-PostScript RGB driver, RGB profiles are shown and CMYK profiles are not.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
94
Advanced panel
The Advanced panel provides control over OPI workflows, conversion of gradients, and transparency flattening so that you can create output compatible with most output devices.
The Advanced panel provides control over workflows requiring OPI or flattening of transparency.
OPI area
Options in this area enable support for OPI (Open Prepress Interface) workflows. For these options to work properly, high-resolution versions of linked graphics must be available where the
OPI server expects to find them. The OPI area contains the following options:
OPI Image Replacement: Enables InDesign to act as an OPI server, so that it will replace linked graphics in placed EPS files. This option is useful when you need to output using high-resolution data instead of low-resolution OPI placeholders (such as when flattening transparency). Keep the following in mind when turning on OPI Image Replacement:
• When placing an EPS file, the Read Embedded OPI Image Links option in the EPS Import
Options dialog box must be selected to be able to replace the OPI links when printing.
• InDesign must have access to the graphics linked by the OPI comments. If the high-resolution versions are not available, InDesign preserves the OPI links and includes the low-resolution proxy in the output stream.
• To have an OPI server resolve OPI links later in the workflow, leave this option deselected.
Omit for OPI: Enables selective omission of imported graphics for later OPI replacement based on the graphic’s file type—EPS (encapsulated PostScript graphics), PDF (Acrobat files), or Bitmap Images. (Photoshop EPS files are considered to be EPS files even if they contain only bitmap data.) Selecting one of these options omits imported files of that type from the output stream, instead producing OPI comments for later handling by an OPI server. The print service provider path must have access to the original high-resolution version of the image on a server at replacement time, otherwise the graphic will be missing on the layout. This option is most useful for large graphics files that may be difficult to store or transmit with the InDesign file.
Note: Special care must be taken when using OPI images with transparency features. Flattening transparency at imagesetter resolution requires high-resolution image data. For information about OPI workflows and transparency, see “Flattening OPI workflows” on page 61.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
95
Transparency Flattener area
Use this area to apply a transparency flattener preset for the job. Note that transparency on each spread can be flattened differently by the customer or the print service provider using spread overrides. To apply a single flattener preset to the entire document, click the Ignore Spread Overrides option. For more information, see “Flattening Transparency for High-Resolution Output” on page 57.
Preset: Specifies the flattener preset to be applied to transparency in the file. Transparency flattener presets in the list are those defined in the Edit > Transparency Flattener Presets dialog box.
Typically, service providers creating final high-resolution output should use the built-in High
Resolution preset or a flattener preset customized for the shop’s high-end output requirements.
• Ignore Spread Overrides. Makes the transparency flattener preset specified in the Print dialog box override any spread overrides (flattener settings applied to specific spreads). This option ensures that all transparency throughout the document is handled using a known flattener preset, and can be useful when it is suspected that the customer’s use of spread overrides may not be appropriate for high-end output.
Summary panel
The Summary panel provides a comprehensive report on the current print settings. The summary can be saved, which is useful for troubleshooting, communicating job settings to colleagues and customers, and archiving the exact settings used to output a job.
In Adobe InDesign CS2, the targeted PPD file—and the full path to it—are now included in the summary.
The Summary panel lists the current settings for all panels in the Print dialog box.
Save Summary: Saves the summary as a text file that can be sent to others, printed, or archived.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
96
Streamlining output with print presets
To output InDesign files with a minimum of time and work, take advantage of the print presets feature. With print presets, job settings are easy to standardize with minimum potential for operator error.
Set up workflow-specific print presets on the computers in your shop before starting to handle customer files. You can then apply a print preset to a customer file and most or all of the options specific to your configuration will be applied instantly. In many cases, the only options you’ll have to change are the ones specific to the job. You can save time and decrease operator error by creating a print preset in advance for each workflow you regularly use in your shop.
Print presets can save all settings in the InDesign Print dialog box, including those in this Output panel.
Setting up print presets
You can create a print preset whether or not any documents are open, or from inside the Print dialog box. A print preset saves the state of every option in Print dialog box panels. The available print presets are shared across open documents, but each open document can use a different print preset.
The Print dialog box in InDesign CS2 contains options common to most printers. However, some device-specific settings, such as options that control paper trays or collating, must be set from dialog boxes specific to the targeted printer. Options set outside of the InDesign Print dialog box can’t be saved with a print preset; if possible, save them using the driver’s own Save
Settings button (the exact name of the option may vary depending on the driver).
To create a print preset:
1 Choose File > Print Presets > Define. If you’re editing the default preset, make sure Default is selected in the list of print presets.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
97
2 Do one of the following:
• If you’re editing the default preset, click Edit.
• If you’re creating a new preset, click New. After the Print dialog box opens, type a preset name in the Name option at the top of the Print dialog box.
3 Set options in each panel as needed. This will set all options available through the InDesign
Print dialog box.
4 Click Setup (Windows) or Printer (Mac OS X), and set device-specific settings as necessary.
Note: If an option exists in both the InDesign dialog box and the printer-specific dialog box, it’s better to set the option in the InDesign Print dialog box so that it will be saved with a print preset. Use the printer-specific dialog box only for options that aren’t found in the InDesign
Print dialog box.
5 Save the printer-specific settings:
• On Windows, settings are saved when you click Print in the Print dialog box.
• On Mac OS X, select Save As from the Presets menu, type a name in the Save Preset dialog box that appears, and click OK.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
98
6 If the printer-specific dialog box isn’t already closed, click the Save, Print, or OK button (the exact button name varies depending on the printer driver). Don’t click Cancel.
7 Click OK to save the changes to the print preset.
You can save a document’s settings as a print preset directly from the Print dialog box. This option is handy because you don’t have to leave the Print dialog box and remember the settings.
To create a new print preset from the Print dialog box:
1 In the Print dialog box, click Save Preset.
2 Do one of the following, and then click OK:
• To create a new preset, type a preset name.
• To redefine an existing print preset with the current settings, choose a preset name from the drop-down list.
Distributing print presets throughout your shop
Once you’ve defined your shop’s print presets, you can easily copy them to other computers that run InDesign in your shop.
To save printer settings into a file you can move to other computers:
1 On the computer where you’ve defined your standard print presets, choose File > Print Presets
> Define.
2 Select all the presets you want to use across your shop’s computers, and click Save.
You can select multiple presets in the list by holding down a modifier key as you click the presets in the list. Shift-click to select a contiguous range. Ctrl-click (Windows) or Commandclick (Mac OS) to select any combination of presets.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
99
3 Click Save, specify a name and location, and click Save.
4 On another of your shop’s InDesign computers, choose File > Print Presets > Define, click
Load, locate the exported file and click Open.
Applying your print presets to customer files
When you open a customer file and choose File > Print, the document uses the settings last saved with the document. The saved settings may target the customer’s desktop printer or proofing device, so they will usually not be ready for high-end output right away. You can quickly set the job up for your shop simply by applying a print preset you’ve defined.
To apply a print preset to an InDesign file:
1 Choose File > Print Presets > [name of print preset].
If your shop’s print preset doesn’t appear in the list, you may need to choose
File > Print Presets > Define and click Load to import print presets you’ve saved.
2 Review the panels in the Print dialog box. If you set up your shop’s default print preset in advance, you usually won’t need to specify shop-specific options. Just keep an eye out for settings that would be specific to the job, such as ink usage.
3 Make the few changes necessary for that specific file, and output the file.
Tip: To define a print preset that will be available for all InDesign files you open, choose a print preset when no documents are open.
Tip: When you output a job, make a habit of creating a print preset of the job settings and archiving the preset with the job. If you later want to repeat or troubleshoot the job, the archived preset will make it possible to output the job exactly as it was run before.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
100
Exporting Adobe PDF files
Adobe designed the PDF export feature to resemble printing as much as possible. InDesign also provides PDF export presets that can apply preset settings. For these reasons, it’s possible for your customers or your shop to export PDF files with a minimum of training.
This section covers the settings and options available when you export an InDesign document as an Adobe PDF file. When you choose File > Export and select Adobe PDF, InDesign generates a completely independent exported file without using a PostScript printer driver or a PPD. In addition, when you export to an Adobe PDF file, InDesign uses the internal PDF library (which supports PDF 1.3-1.6) along with the Adobe Graphics Manager to create the file, instead of using
Acrobat Distiller. If you use postprocessing applications to impose documents, you can use this approach so that you can specify device-dependent print settings in imposition software instead of in the page layout application. In addition, if you encourage customers to create print-ready
PDF files by exporting PostScript or EPS files, this approach can lessen your concern about the variables, such as printer driver versions, PPD versions, and print options, associated with printing composite PostScript files. (Of course, you can also still use Acrobat Distiller to create
PDF files from PostScript files you generate from InDesign, if you need an option that isn’t available in the Export PDF dialog box).
Note: If you or a customer are creating a PDF file from all documents in a book file, you must choose Export Book to PDF from the book palette menu when no documents are selected in the book palette.
Options in the Export PDF dialog box are consistent with those available in the Print dialog box.
The general appearance is also consistent with the Print dialog box. At the top of the Export PDF dialog box is the Preset menu, which lists the PDF export preset in use. At the top left is a list of each panel in the dialog box. Just click in the list to switch to another panel, or press Ctrl+up arrow or down arrow.
Common areas
Like the Print dialog box, the only area that changes in the Export PDF dialog box is the area containing options specific to each panel. All other areas of the dialog box are common areas that remain visible regardless of which panel you are viewing.
Adobe PDF Preset menu
The Adobe PDF Presets includes the Adobe PDF presets included with Adobe Creative Suite 2
(listed in square brackets) and any custom PDF presets you make. Like print presets, they gather all of the settings you use to create a PDF file. You can design presets for specific purposes and choose them as needed. You can manage them by choosing File > Adobe PDF Presets, or by clicking the Save Preset button in the Export PDF dialog box.
For final output, service providers should use the built-in Press Quality or PDF/X standard presets. The Press Quality preset settings result in the level of quality required for prepress output. The presets PDF/X-1a and PDF/X-3 are ISO standards that are also prepress-quality and may be required by some customers. You can use one of these presets as a starting point for creating your own custom PDF export presets. The built-in presets and your own customized presets are available for use in all Adobe Creative Suite 2 components. For a complete description of using and customizing PDF export presets, see “Streamlining output with PDF presets” on page 112.
Note: PDF/X-1a 2001 and PDF/X-3 2002 appear both as presets and as choices in the Standard pop-up menu. Selecting them as a preset changes options throughout the dialog box. Selecting them in the Standard pop-up menu simply limits your options to settings that comply with the standard you selected, and enables you to base your own preset on one of these standards.
Standard menu
Selecting a standard from this menu restricts the options available in the Export Adobe PDF dialog box to those that are allowed under the standard you selected. This restriction helps
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
101
ensure that the PDF document is valid under the selected standard. For more information about the PDF/X standards, see “About the predefined PDF export presets” on page 112.
Compatibility menu
The compatibility menu changes the options in the Export Adobe PDF dialog box to conform to the version of Acrobat compatibility that you select. If you select a compatibility level that isn’t supported by your selection in the Standard menu, the Standard menu selection will change to
None. The Compatibility pop-up menu includes the following options:
Acrobat 4 (PDF 1.3): Generates a file using the PDF 1.3 standard. Maintains compatibility with software or hardware that isn’t compatible with features in Acrobat 5 through Acrobat 7 (PDF 1.4 through 1.6), such as live transparency. If you select this option, transparency must be flattened.
Acrobat 5 (PDF 1.4): Generates a file using the PDF 1.4 standard. Choose this option to store native (live) transparency in a PDF file.
Acrobat 6 (PDF 1.5): Generates a file using the PDF 1.5 standard. Choose this option to store live transparency in a PDF file and translate InDesign layers to PDF layers. Before selecting this option, verify that any downstream workflow that may be involved (such as RIPs and prepress applications) supports PDF 1.5.
Acrobat 7 (PDF 1.6): Generates a file using the PDF 1.6 standard. Job Definition Format support is enabled when Acrobat 7 is installed on the same computer and you choose this option.
Note: Check the InDesign Adobe PDF settings periodically using the Summary panel in the
Export PDF dialog box. InDesign always uses the last set of options defined; it doesn’t automatically revert to the default settings.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
102
General panel
The General panel contains basic printing options like those available in the Print dialog box (see the Print Dialog Box General panel description on page 76). It also lets you specify which PDF attributes are exported.
The General panel controls which pages, objects, and features export to a PDF file.
Pages area
The Pages area is similar to the Pages area in the Print dialog box, but it doesn’t have Sequence and Print Master Pages options. See “Pages area” on page 76.
Note: You may want to advise customers to leave the Spreads option off because it may interfere with imposition workflows.
Options area
The following options are available in the Options area:
Embed Page Thumbnails: Creates a thumbnail image for each page being exported, or one thumbnail for each spread, if the Spreads option is selected in the General panel. Acrobat 5 and
6 automatically generate page thumbnails, so this option is most useful for Acrobat 4, where deselecting this option can reduce the file size.
Optimize for Fast Web View: Optimizes an Adobe PDF file to reduce file size. InDesign restructures the file to prepare for page-at-a-time downloading (byte serving) from web servers. This option compresses text and line art regardless of what you have selected in the Compression settings. This option enables faster access and viewing when downloading the file from the Web or over a network.
View PDF After Exporting: Opens the Adobe PDF file in Acrobat. For best results, use
Acrobat 5, Acrobat 6 Professional, or Acrobat 7 Professional. Transparency can be viewed in
Acrobat 5, Acrobat 6 Professional, or Acrobat 7 Professional using this format. The Overprint
Preview command shows on-screen how overprinting will appear; you can preview overprints in the free Adobe Reader® as well as in Acrobat Standard or Professional.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
103
Create Acrobat Layers: Translates InDesign layers to PDF layers. This option is available only if you selected Acrobat 6 (PDF 1.5) or Acrobat 7 (PDF 1.6) from the Compatibility pop-up menu.
When selected, printer marks are placed on a new layer called Printer Marks. Note that PDF layers are generally intended to control display of multiple content sets, not simply to organize objects. You may not want to select this option unless you’re using InDesign to create content that takes advantage of PDF layer capabilities.
Include area
This area lets you specify which Acrobat features are included in the PDF file.
Bookmarks: Creates bookmarks for InDesign table of contents entries, preserving the TOC levels. This option also creates Adobe PDF bookmarks for hyperlinks within the InDesign document, which can be navigated in Acrobat or Adobe Reader.
Hyperlinks: Creates Adobe PDF hyperlinks for InDesign hyperlinks, table of contents entries, and index entries. The hyperlinks are fully supported in Acrobat or Adobe Reader.
Nonprinting Objects: Exports all objects, including those for which Nonprinting is turned on in the Attributes palette.
Visible Guides and Baseline Grids: Exports margin guides, ruler guides, column guides, and baseline grids currently visible in the document. Grids and guides export in the same color as used in the document.
eBook Tags: Generates an Adobe PDF file that automatically tags elements in the story based on a subset of the Acrobat 5 and Acrobat 6 Professional tags that InDesign supports.
Interactive Elements: Exports movies, sounds, and all enabled buttons states. While not directly relevant to prepress projects, this option enables the multimedia authoring support in
InDesign CS2 to translate directly into the corresponding capabilities in Acrobat.
Multimedia: Specifies whether movies and sounds are linked to or embedded in the PDF. This is only available when Interactive Elements is selected and doesn’t affect buttons. If Link All is selected, store the linked movies and sounds in the same folder as the PDF. The Use Object
Settings option lets linking and embedding be determined by settings applied to individual objects. Embed All embeds media regardless of object settings.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
104
Compression panel
The Compression panel contains options for minimizing the size of a PDF file. For best results in a service provider workflow, compression should be limited so that it doesn’t degrade the output quality of the file. For ease of training, this panel is now very similar to the same Compression panel in all Adobe Creative Suite 2 components.
The Compression panel controls how graphics and text are compacted when exported to a PDF file.
Options in this panel give you control over how images and other elements in the InDesign document are compressed. For each type of image, you can choose between downsampling
(which uses the average of the color values in a sample area) and subsampling (which uses the color value of the pixel in the center of a sample area). Bicubic downsampling is the slowest but most precise method, resulting in the smoothest tonal gradations.
In a print service provider workflow, output quality is the priority. If compression is applied, downsampling will be more desirable than subsampling, and lossless compression (ZIP or any of the Monochrome compression options) provides higher quality than lossy compression (JPEG).
If you must downsample, bicubic downsampling is the highest-quality option. Remember that you or your customer can simplify compression decisions just by choosing the Press Quality preset, which already uses compression settings appropriate for a print service provider workflow.
Color Bitmap Images: To compress color images, select Downsample To and specify a dpi value; InDesign only downsamples the image when its resolution exceeds 1.5 times the value you specify. For compression, we recommend choosing Automatic, and setting Quality to Maximum.
Note that JPEG 2000 compression (available when you specify Acrobat 6 compatibility) may not be supported by all RIPs and prepress applications.
Grayscale Bitmap Images: To compress grayscale images, select Downsample To and specify a dpi value; InDesign only downsamples the image when its resolution exceeds 1.5 times the value you specify. For compression, we recommend choosing Automatic, and setting Quality to
Maximum. Note that JPEG 2000 compression (available when you specify Acrobat 6 compatibility) may not be supported by all RIPs and prepress applications.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
105
Monochrome Bitmap Images: To compress one-bit images, select Downsample To and enter the resolution of the final output device. Then, select CCITT Group 4 for the greatest lossless compression. InDesign supports CCITT Group 3 and Group 4 compression options. CCITT
Group 3, which is used by most fax machines, compresses monochrome bitmaps one row at a time. Another option, Run Length, is a lossless compression option that produces the best results for images with large areas of solid white or black.
Compress Text and Line Art: This option is selected by default; we recommend leaving it selected. InDesign uses lossless compression, so the quality of these elements in your PDF file won’t be affected.
Crop Image Data to Frames: This option can reduce file size by exporting only image data that falls within the visible portion of a frame. Don’t select this option if postprocessors might use the additional information (for repositioning or bleeding an image, for example).
Marks And Bleed panel
This panel specifies items that expand the required print area beyond the page edge, such as crop marks and the bleed area. The Export PDF Marks and Bleed panel is identical to the Marks and Bleed panel in the Print dialog box. As with the Print dialog box, this panel now includes upgraded controls corresponding to the improved bleed and slug support in
Adobe InDesign CS2. See “Marks And Bleed panel” on page 82.
If you export a page to PDF with marks, bleed area, and slug area, make sure you specify a page size large enough to accommodate them.
The Marks And Bleed panel adds items outside the trim size of the page size.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
106
Output panel
The Output panel contains options for converting colors, managing inks, and options for output to the PDF/X standards.
The Output panel controls how color is represented in the exported PDF file.
Color area
The Color settings specify how to represent color information in the exported Adobe PDF file.
For example, if a customer used a mix of RGB and CMYK objects, the color settings can control how the RGB objects are converted to CMYK upon export, as in the Output panel of the Print dialog box (see page 84). All spot color information is preserved during color conversion; only the process color equivalents convert to the designated color space.
Color Conversion: Specifies what kind of color conversion to apply, if any. Choose from the following options:
• No Color Conversion. This option is appropriate for documents that are known to use color modes consistently and where no objects in the document require conversion for the output device.
• Convert to Destination. Objects with embedded profiles are converted from their profiles to the Destination profile, and objects without profiles are converted from the document working space to the Destination profile. This option can be useful for converting RGB images as you export to PDF.
• Convert to Destination (Preserve Numbers). Objects with embedded profiles are converted from their profiles to the Destination profile, and the original color values of objects without profiles are preserved. This option is useful for protecting the preseparated color values of
CMYK images.
Destination: Specifies the profile to use for color conversion. The profiles available in this menu are either unavailable, RGB only, or CMYK only, depending on the option selected in the Color
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
107
Conversion pop-up menu. Using this profile, InDesign converts the document’s color information (defined by the source profile in the Working Spaces area of the Color Settings dialog box) to the color space of the target output device.
Profile Inclusion Policy: Embeds profile information for color management at viewing or printing time. The advantage is that if the application or output device that uses the Adobe
PDF file needs to translate colors into another color space, it has the profile information. The following options may be available, depending on the option selected in the Color Conversion pop-up menu:
• Don’t Include Profiles. Neither the Destination profile nor any image profiles are included in the exported PDF file.
• Include All Profiles. Any RGB and CMYK object imported into or created in InDesign CS2 is exported with a profile.
• Include Tagged Source Profiles. Any linked image or PDF file tagged with a profile is exported to PDF with its profile, while all other content is exported without a profile.
• Include All RGB and Tagged CMYK Profiles. Any RGB object tagged with a profile is exported with its profile; any untagged object or object created in InDesign CS2 is exported with the document profile. Any CMYK object tagged with a profile is exported with its profile, but any CMYK object not tagged with a profile is exported without a profile.
Simulate Overprint: Exports the PDF file so that it displays the effects of overprinting where it was applied using the Attributes palette. This option is useful when sending proofs back to customers using Acrobat 4, which doesn’t support overprint preview (Acrobat 5, Acrobat 6
Professional, and Acrobat 7 Professional do, as well as the latest free Adobe Reader). Simulate
Overprint enables you to soft-proof document colors directly on the monitor before they are reproduced on a particular output device.
Note: Simulate Overprint is intended for client review and proofing—do not enable Simulate
Overprint for a PDF that will be used to generate final high-end printing or separations. Spot colors are not preserved when Simulate Overprint is on.
Ink Manager: Controls ink setup for separations later in the workflow, without altering the customer’s original document. See “Ink Manager” on page 87. Note that if you make changes to your document using the Ink Manager from the Export PDF dialog box (for example, you change all spot colors to their nearest process color equivalents), those changes will be reflected in the exported file, and saved with the InDesign document, but they won’t be saved with the
PDF export preset unless you update it.
PDF/X area
The PDF/X area is only available if you selected a PDF/X preset or selected the PDF/X standard in the General panel. The Output Intent Profile describes the CMYK conditions that the document was prepared for, such as SWOP. For more information about PDF/X standards, see “About the predefined PDF export presets” on page 112. Some of the following options are available only if you selected a PDF/X standard that supports them:
Output Intent Profile Name: Embeds a profile representing the type of CMYK output for which the document has been prepared. This profile is informational only, and is not used for color conversion.
Output Condition: The specific printing condition that the output profile represents, such as
SWOP v 2.0 or Flexographic. If this is not filled in by the selected Output Intent Profile, you can enter descriptive text.
Output Condition Identifier and Registry Name: Additional technical information supplied by the output intent profile (if available), providing more details about the output intent.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
108
Advanced panel
The Advanced panel contains options for subsetting fonts, omitting graphics for OPI replacement, selecting a transparency flattener preset, and adding Job Definition Format (JDF) support.
The Advanced panel provides control over workflows requiring OPI or flattening of transparency.
Fonts area
InDesign embeds a font unless the font vendor has restricted embedding. Embedding prevents font substitution when a reader edits the file and ensures that readers will see the text in its original font.
If InDesign cannot embed a font due to the font vendor’s settings and someone who opens or prints an Adobe PDF file does not have access to the original font, InDesign temporarily substitutes the font with a Multiple Master typeface: either AdobeSerMM for a missing serif font or
AdobeSanMM for a missing sans serif font. Multiple Master fonts can simulate the font metrics and line breaks of the original font so that the overall layout is preserved.
Subset fonts when percent of characters used is less than: Embeds only the glyphs actually typed in the document, based on a threshold percentage. The threshold determines the point at which InDesign embeds all characters for a font. For example, if you change the threshold to 35,
InDesign embeds all characters only if more than 35% of the font’s characters are used in the file; if fewer than 35% of the characters are used, InDesign embeds only the characters used.
For high-resolution output, it’s a good idea to subset fonts to ensure that the glyphs used by the document are the ones that will be used by the output device. If font subsetting is not used, output may not be as expected if some glyphs at the output device have subtle differences compared to the glyphs in the font versions used in the document. For this reason, the PDF export preset Press is set to subset all fonts below 100% glyph usage by default.
OPI area
The OPI options in the Export PDF dialog box are identical to those in the Print dialog box, except that there is no OPI Image Replacement option in the Export PDF dialog box. See “OPI area” on page 95.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
109
The OPI settings in this dialog box don’t change the settings in the Print dialog box.
Transparency Flattener area
You can apply a transparency flattener preset when you export to PDF, just as you can when you print. The Transparency Flattener area in the Export PDF dialog box works identically to the same area in the Advanced panel of the Print dialog box. See “Transparency Flattener area” on page 96.
The transparency flattener preset you specify in this dialog box doesn’t change the setting in the
Print dialog box.
Job Definition Format (JDF) area
The Job Definition Format is like an electronic job ticket that carries important information along with a job, so that anyone encountering the job has complete information about it. For this reason, JDF can improve communication and prevent costly misunderstandings. If you are operating a workflow that uses the Job Description Format, and Adobe Acrobat 7 Professional is installed, you can select the Create JDF File Using Acrobat option. When this option is on, a JDF file is created along with the exported PDF. Both files open in Adobe Acrobat 7 Professional so that you can process them further.
Security panel
You can limit access to an Adobe PDF document when you export it. When a PDF document’s features are restricted, any tools and menu items related to those features are dimmed. In
Adobe InDesign CS2, the Security panel is consistent with the same panel in Adobe Illustrator
CS2 and Acrobat 7 Professional.
The Security panel provides control over opening and editing the document.
Note: PDF export presets do not support passwords and security settings. If you export a document that includes security, and click Save Preset from the Export PDF dialog box, the passwords and security settings won’t be preserved.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
110
Passwords area
An Adobe PDF file can have an open document password (user password) and a change security settings password (master password). If you set any security restrictions in your file, you should also specify a master password; otherwise anyone who opens the file could remove the restrictions. If a file is opened with a master password, the security restrictions are temporarily disabled. If the file has both passwords, you can open it with either one.
PDF security can cause delays in prepress workflows when personnel handling the file downstream do not know the password. For this reason, the PDF/X-3 specification disallows the use of security settings.
Require a Password to Open the Document: Prevents access to the file unless the User Password is entered properly. The password is required even if the PDF file is opened in another program that can open PDF files, such as Adobe Illustrator. If you select this option, enter a Document
Open Password.
Use a Password to Restrict Printing, Editing, and Other Tasks: Restricts the actions selected in the Permissions area of the Security panel unless the Master Password is entered properly. If you select this option, enter a Permissions Password. This password must be different than the
Document Open Password. A permissions password is required to change any of the options in the Permissions area.
Permissions area
Printing Allowed: Controls the level at which printing is allowed. For prepress service providers, this option should be set to High Resolution if the Permissions Password is in effect. The None option prevents printing, which can be useful for on-screen review of materials where confidentiality is a concern.
Changes Allowed: Defines which editing actions are allowed. None prevents all edits including entering signatures and form fields. The other option names describe the scope of restrictions.
Enable Copying Of Text, Images, And Other Content: Lets anyone use a PDF reader to copy and paste PDF content to other documents.
Enable Text Access Of Screen Reader Devices For The Visually Impaired: Lets visually impaired users use screen readers to read the document’s contents. Users can also copy and extract information from the document.
Summary panel
The Summary panel provides a comprehensive report on the current export settings. The summary can be saved, which is useful for troubleshooting and for communicating job settings to colleagues and customers.
Save Summary: Saves the summary as a text file that can be sent to others, printed, or archived.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
111
Streamlining output with
PDF presets
To output PDF files with a minimum of time and work, take advantage of the PDF export presets feature. With PDF export presets, job settings are easy to standardize with minimum potential for operator error.
Set up workflow-specific PDF export presets on the computers in your shop before starting to handle customer files. You can then apply a PDF export preset to a customer file and most or all of the options specific to your configuration will be applied instantly. In many cases, the only options you’ll have to change are the ones specific to the job. You can save time and decrease operator error by creating a PDF export preset in advance for each workflow you regularly use in your shop.
About the predefined PDF export presets
Adobe InDesign CS2 includes predefined PDF export presets. These are shared with other
Adobe Creative Suite 2 applications if they are installed.
Note that for prepress service providers, Press Quality is the preset that should typically be used for final output. However, Smallest File Size can be useful for proofing and reviews, particularly when exchanged over a network. In addition, many organizations are now standardizing around
PDF/X-1a and PDF/X-3. These ISO standards should be of particular interest to prepress service providers because they are specifically designed to increase the reliability of PDF-based prepress workflows. You can also choose a preset based on how you want to handle transparency: High
Quality Print and Press Quality preserve live transparency, while the PDF/X standards flatten transparency.
The following PDF export presets are built into Adobe InDesign CS2:
• High Quality Print. Creates Adobe PDF files that are intended for desktop printers, digital copiers, publishing on a CD-ROM, or to send to a client as a publishing proof. In this set of options, file size is still important, but it is not the only objective. This set of options uses compression and downsampling to keep the file size down, but it also embeds subsets of all fonts used in the file. This preset also provides for accessibility, which is becoming more widely required.
Note: Do not confuse the High Quality Print preset with the Press Quality preset. The High
Quality Print preset exports Adobe PDF files that output well to desktop printers and proofers, and the Press Quality preset exports PDF files for prepress output devices, color separations, and high-end digital presses.
• Press Quality. Creates Adobe PDF files that will be printed as high-quality final output to devices such as an imagesetter, platesetter, or digital press. In this case, output quality is a much higher priority than file size. The objective is to maintain all the information in an
Adobe PDF file that a commercial printer or service provider will need to print the document correctly. This PDF export preset does not convert color spaces. It downsamples color and grayscale images to 300 dpi and monochrome images at 1200 dpi, embeds subsets of all fonts used in the file, and uses other settings to preserve the maximum amount of information about the original document.
• PDF/X-1a 2001. Creates Adobe PDF files that conform to the ISO-standard PDF/X-1a specification. The objective of this standard is to deliver a file that is ready for high-resolution CMYK output. Compression settings are identical to the Press preset. The PDF is generated for PDF 1.3
(Acrobat 4) compatibility, RGB colors are converted to CMYK as the output color space, and
OPI content cannot be omitted. Spot colors are supported, and the transparency flattener is set to High Quality. You can preflight PDF/X-1a files in Acrobat 6 or 7 Professional. When you use
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
112
InDesign to convert to either PDF/X-1a or PDF/X-3 , InDesign validates the document against its ability to be converted to those standards, and InDesign will alert you if there is a problem.
• PDF/X-3 2002. Creates Adobe PDF files that conform to the ISO-standard PDF/X-3 specification. The objective of this standard is to deliver a file that is ready for high-resolution output within a CMYK workflow or within a color-managed RGB workflow. Compression settings are identical to the Press Quality preset. It doesn’t allow security settings. In other respects it’s identical to PDF/X-1a.
• Smallest File Size. Creates compact Adobe PDF files that will be displayed on the World Wide
Web or an intranet, or that will be distributed through an e-mail system for on-screen viewing.
This set of options attempts to create as small a document as possible. It compresses and downsamples to monitor resolution; converts all colors to RGB; maintains compatibility back to Acrobat 4; and embeds subsets of all fonts used in the file except the Base 14 fonts (which are not embedded). It also optimizes files for byte serving.
You can’t edit the built-in presets, but you can create your own, using a built-in preset as a starting point. If you base a preset on PDF/X-1a or PDF/X-3 by selecting one of those standards from the Standard pop-up menu in the General dialog box, the choices available to you in the rest of the PDF Export Preset dialog box are constrained to maintain conformity to the standard you chose. If you selected a PDF/X standard, but the name disappears from the Standard pop-up menu, you’ve set an option that doesn’t conform to the PDF/X standard you selected.
Setting up PDF export presets
If you’ve worked with print presets before, setting up PDF export presets will be familiar to you.
As you set up a preset, pay attention to the Warnings area, which can alert you to inconsistencies or combinations of settings that may result in unwanted output.
To open the Adobe PDF Presets dialog box, choose File > Adobe PDF Presets > Define.
To create or edit a custom Adobe PDF preset:
1 In the Adobe PDF Presets dialog box, do one of the following:
• To create a new preset, click New, and type a Name.
• To change an existing custom preset, double-click the file in the list, or select the file and click Edit.
Adobe InDesign CS2 Printing Guide for Prepress Service Providers
113
2 Specify export settings as necessary in the Standard pop-up menu, the Compatibility pop-up menu, and in any of the panels listed in the menu under the name, and then click OK. The options available in the panels are the same as those in the Export PDF dialog box, except for the Security options.
To rename or delete a custom PDF export preset:
1 In the Adobe PDF Presets dialog box, do one of the following:
• To rename an existing preset, select a preset in the list, click Edit, type a new name, and then click OK.
• To delete presets, select one or more presets in the list, click Delete, and then click
OK to confirm the deletion.
2 Click OK.
To load custom PDF export presets from another file:
1 In the Adobe PDF Presets dialog box, click Load.
2 Locate and double-click the file containing the presets you want to load, or select the file and click Open. You can also load a presets file by double-clicking the file on the desktop, without having to open the Adobe PDF Presets dialog box first.
To save PDF export presets to a file:
1 In the Adobe PDF Presets dialog box, select one or more presets in the list to export.
2 Click Save As. Specify a name and location, and then click Save.
FOR MORE INFORMATION
For a comprehensive overview of Adobe InDesign CS2, please visit [URL of product main page]
Additional in-depth information on some topics covered in this paper is available in these white papers:
Transparency Guide for Printers
[URL]
Transparency Guide for Designers
[URL]
PDF/X White Paper
[URL]
Adobe Creative Suite 2 Color Consistency Guide
[URL]
Adobe Creative Suite 2 Color Integration Guide
[URL]
Adobe Systems Incorporated • 345 Park Avenue,
San Jose, CA 95110-2704 USA • www.Adobe.com
Adobe, the Adobe logo, Acrobat, Adobe InDesign CS, Adobe
InDesign CS2, Adobe PDF, Creative Suite, Creative Suite 2, Distiller,
GoLive, Illustrator, InDesign, InDesign 2, PageMaker, PDF, Photoshop,
PostScript, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Apple, Apple Display Calibrator Assistant, Mac OS, Mac OS X, and Macintosh are trademarks of Apple Computer, Inc., registered in the
United States and other countries. PowerPC is a registered trademark of IBM Corporation in the United States. Microsoft, Windows, Windows
2000, and Windows XP are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners.
© 2005 Adobe Systems Incorporated. All rights reserved.
Printed in the USA. 2/05
Pobierz
Publiczny link zaktualizowany
Publiczny link do Twojego czatu został zaktualizowany. You may view and manage your chat links after registration here.
Publiczny link do dokumentu
Reklama
