Front-Loading Dryer

Front-Loading Dryer

Owner’s Guide:

Installation and Operation Instructions

Dryer / User Manual

DV 17542

1 / EN

Please read this user manual first!

Dear Customer,

Thank you for prefering a Blomberg product. We hope that your product which has been manufactured with high quality and technology will give you the best results. We advise you to read through this manual and the other accompanying documentation carefully before using your product and keep it for future reference. If you transfer the product to someone else, give its manual as well. Pay attention to all details and warnings specified in the user manual and follow the instructions given therein.

Use this user manual for the model indicated on the cover page.

Read the instructions.

Explanation of symbols

Throughout this user manual the following symbols are used:

C

Important information or useful hints about usage.

Warning for hazardous situations with regard to life and property.

B

Warning against electric shock.

Warning against hot surfaces.

Warning against fire hazard.

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment

Regulations.

Do not dispose of the packaging wastes with the domestic waste or other wastes, discard them to the dedicated collection points designated by the local authorities.

TABLE OF CONTENTS

1 Your Dryer 4

2 Important Safety Instructions 5

3 Installation Instructions 9

3.1 Electrical connection............................8

3.2 Grounding Instructions ......................10

3.3 Appropriate installation location .........11

3.4 Minimum Installation Clearances.......12

3.5 Use on top of a washer......................12

3.6 Adjusting the feet ...............................13

3.7 Ventilation duct and connection ........13

4 Operating Instructions 15

4.1 First Use ............................................15

4.2 Garments suitable for drying .............15

4.3 Garments unsuitable for drying .........15

4.4 Preparing clothes to be dried.............16

4.5 Correct load capacity .........................16

5 Operating the product 17

5.1 Control panel .....................................17

5.2 Loading door......................................17

5.3 Turning on the dryer ..........................17

5.4 Main programs...................................18

5.5 Special programs...............................18

5.6 Starting the Program .........................19

5.7 Progress of program ..........................19

5.8 Changing the program after the program has started ...............................................19

5.9 Adding/removing laundry in stand-by mode........................................................20

5.10 Auxiliary functions ............................20

5.11 Child-proof lock ................................20

5.12 Warning indicators ...........................21

5.13 End of program ................................21

6 Technical Specifications 22

7 Quick Start-up Instructions 23

8 User maintenance and cleaning instructions 24

8.1 Lint filter .............................................24

8.2 Sensor ...............................................24

7 Troubleshooting 25

8 Warranty Statement 26

1

Your Dryer

1

3

4

5

4

5

Type label

Adjustable Feet

2

1

2

3

Control Panel

Loading Door

Lint Filter

NOTE: Specifications of this appliance may change without notice to improve the quality of the product. Drawings in this manual are schematic and may not match your product exactly.

Values stated on the dryer labels or in the documentation accompanying it are obtained in the laboratory in accordance with relevant standards. Depending on operational and environmental conditions of the appliance, values may vary.

4 / EN

Dryer / User Manual

2

Important Safety Instructions

A

WARNING: To reduce the risk of fire or electric shock

resulting in serious injury or death when using this appliance, follow the basic precautions including the following:

• Read all instructions before using the appliance. Failure to follow these instructions will increase the risk of fire or electric shock and will void the warranty.

A

This product has been designed for home use only.

• The appliance must be operated at temperatures between

+5°C and +35°C. (41°F and +95°F)

• The appliance must not be installed behind a lockable door, a sliding door or a door with the hinges on the opposite side to that of the tumble dryer.

• Do not install or store this appliance where it will be exposed to weather.

• Do not tamper with the controls.

• Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published userrepair instructions that you understand and have the skills to carry out.

• Never wash the appliance with water.

• Never touch the plug with wet hands.

• Never pull from the cable to unplug the dryer.

• Do not operate the appliance if the power cord or plug is damaged.

• For malfunctions that cannot be solved by information in the operating manual: Turn off and unplug the appliance and call an authorized service provider.

Dryer / User Manual

5 / EN

• This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounded plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

B

WARNING: Improper connection of the equipment-

grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the appliance is properly grounded.

• Power cord plug must be within easy reach after installation.

• To reduce the risk of fire or electric shock, do not use extension cords, multi-plugs or an adapter to connect the dryer to electrical mains.

• Do not modify the plug provided with the appliance: if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

• If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid an electrical hazard.

• The appliance must not be operated unless it is repaired!

• Ventilation openings in the base must not be obstructed by carpets, etc.

• Exhaust air must not be discharged into a flue used for exhausting fumes from appliances burning gas or other fuels.

• Adequate ventilation must be provided to avoid the back flow of gases into the room from appliances burning other fuels, including open fires.

Dryer / User Manual

6 / EN

• Do not dry articles that have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry-cleaning solvents or other flammable or explosive substances as they give off vapors that could ignite or explode.

• Do not use the tumble dryer if industrial chemicals have been used for cleaning what you want to dry.

• Do not dry unwashed items in the tumble dryer.

• Do not place items exposed to cooking oils in your dryer.

Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.

• Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber-backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer.

• Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.

• The appliance may only be used for the drying of textiles that are marked accordingly.

• Undergarments that contain metal reinforcements should not be placed in a tumble dryer. Damage to the tumble dryer can result if any of the metal reinforcement come loose during drying.

• Before loading check all garments for lighters, coins, metal pieces, needles, etc.

• The use of fabric softener sheets is not recommended.

• The final part of a tumble dryer cycle occurs without heat

(the cool-down cycle) to ensure that the items are left at a temperature that ensures the items are not damaged by getting too hot.

A

WARNING: Never stop the tumble dryer before the

end of the drying cycle unless all items are quickly removed and spread out to dissipate heat.

Dryer / User Manual

7 / EN

• Do not reach into the appliance if the drum is moving.

• Do not allow children to play on or in the appliance.Close supervision of children is necessary when the appliance is used near children.

• Keep pets away from the appliance during the drying cycle.

• Before the appliance is removed from service or discarded, remove the door to the drying compartment.

• Close the loading door when you leave the area where the dryer is located.

• This appliance is not intended for use by persons

(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they are supervised or have been given instructions concerning the use of the appliance by a person responsible for their safety.

• Clean lint filter before or after each load.

• Keep area around the exhaust vent and adjacent surrounding areas free from the accumulation of lint, dust, and dirt.

• The interior of the appliance and exhaust ductwork should be cleaned periodically by qualified service personnel.

• Never use the dryer without the lint filter.

• When your dryer is not in use or after the laundry is taken out following the completion of drying process, turn off by using the On/Off button. In cases when the On/Off button is in the On position while the dryer is plugged in, keep the door of the dryer closed.

• For power saving in models with lamps, when your dryer is not in use, keep the door closed if the On/Off button is in the On position and the dryer is energized.

SAVE THESE INSTRUCTIONS

8 / EN

Dryer / User Manual

3

Installation Instructions

WARNING: Failure to follow these instructions could result in a risk of fire

C

Neutral conecction is not used in this product

•The clothes dryer (“appliance‘) installation must be performed by a qualified installer.

•Install the appliance according to the manufacturer’s instructions and local codes.

•Do not install a clothes dryer with flexible plastic venting materials. If flexible metal

(foil type) duct is installed, it must be of a specific type identified by the ap pliance manufacturer as suitable for use with clothes dryers. Flexible venting materials are known to collapse, be easily crushed, and trap lint.

These conditions will obstruct the clothes dryer’s airflow and increase the risk of fire.

SAVE THESE INSTRUCTIONS

3.1 Electrical connection

Connect the appliance to a grounded outlet protected by a fuse or circuit breaker of suitable capacity.

Power Cable

3-Wire Electrical Connection

If your receptacle is a 3-wire receptacle as shown below, you must obtain a 3-wire dryer cord. A dryer cord can usually be found at your local hardware supply, electrical supply or home center. Cord should have closed loop or upturned end wire terminating connectors. The cord kit must be marked

“For Use with Clothes Dryers”.

4-wire receptacle

(14 -30R)

Dryer shipped with cord to fit this type 4 -wire receptacle

3- wire receptacle

( 10-30R)

If yo u have 3-wir e receptacle, like this , a 3-wire dryer cord mu st be purc hased locall y.

3-wire receptacle

(10 -30R)

Typical 3- Wire Dryer Cord 240V/30 amp

NEMA 10-30 Type SRDT

A

If the dryer is installed in a mobile home, recreational vehicles, new branch-circuit installations or in areas where local codes do not permit grounding through the neutral conductor, only a 4-wire power supply cord shall be used.

Dryer / User Manual

9 / EN

To change the cord:

1. Make sure that the dryer is not plugged into any power outlet.

B

DO NOT plug end of dryer power cord into a live receptacle before connecting dryer power cord to dryer terminals and closing junction/splitter box as described below.

B

DO NOT repair old power supply cords. Power cord must be changed only by a qualified person. There is a risk of electric shock!

2. Remove the screw from the cover of the junction box located at the top rear of the dryer.

3. Remove the red, white and black wire from the terminal block.

4. Remove the green ground wire from the ground terminal.

5. Loosen the strain relief clamp holding the

4-wire cable.

6. Thread the 4-wire cable out through the strain relief clamp.

7. Thread the new 3-wire dryer cord through the strain relief clamp.

8. Attach the power cord Ground conductor

(the center wire) to the terminal labeled N.

Connect the terminal labeled N and the

Ground terminal labeled G with the supplied short cable. Tighten the terminals so that they securely hold the conductors.

9. Attach the two remaining power cord outer conductors to the 2 terminals labeled

L. Tighten both screws so that the power conductors are securely held in place.

10. Tighten the strain relief so that the power cord cannot be moved.

11. Replace the cover on the junction box and fasten in place.

Power Cable

The dryer is now ready to be plugged into the 3-wire receptacle of the proper rating.

The receptacle should be located so that the plug and receptacle will be accessible with the dryer in its installed position.

3.2 Grounding Instructions

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipmentgrounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

• Power cord plug must be within easy reach after installation.

• The voltage and the allowed fuse/breaker protection are specified in the section

“Technical Specifications”.

• The stated voltage must match your mains voltage.

• Connection via extension cords or multiplugs should not be made.

• The main fuse/breaker and switches must have a contact distance of minimum 3 mm.

B

A damaged power cable must be replaced by a qualified electrician.

WARNING – Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance: if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

Dryer / User Manual

10 / EN

B

The appliance must not be operated unless it is repaired!

There is the risk of electric shock!

3.3 Appropriate installation location

•Install your appliance in environments that have no risk of freezing and are in a stable and level position.

•Do not place your appliance on a high pile rug or on similar surfaces.

•Operate your appliance in a well-ventilated, dust-free environment.

•Do not block the air ducts in front of and under the dryer.

B

Make sure that your appliance is not placed on the power cable.

Keep appliance at least 0.6”

(1.5 cm) from the edges of other furniture.

Dryer / User Manual

11 / EN

24.6

(625 mm) min.

”

90

0

90

0

22.05

”

560 mm min.

36.14

”

(918 mm) min.

21¼

"

(540

mm

)

33½"

(850 mm)

3.4 Minimum Installation

Clearances

Alcove or

Built-under

Closet

Sides 0.59 in. (15 mm) 0.59 in. (15 mm)

Top 2.68 in. (68 mm) 2.68 in. (68 mm)

Rear 0.59 in. (15 mm) 0.59 in. (15 mm)

Front 0.20 in. (5 mm) 0.20 in. (5 mm)

Ventilation Requirements

Closet door must have 2 openings, one located 3.2 inches (8 cm) from bottom of door having a minimum area of 16 sq. inches (103 cm2) and the other one located

3 inches (7.5 cm) from top of door having a minimum area of 46 sq. inches (294 cm2).

3.5 Use on top of a washer

•A stacking-kit (Part no: 296 710 0100) should be used between the washer and dryer for use on top of a washer. The stacking-kit should be installed by the

Authorized Service provider.

12 / EN

Dryer / User Manual

•Place the appliance on a solid floor. If it is to be placed on top of a washer, the approximate weight together may reach 397 lbs (180 kg) when they are full. Therefore, the floor must be capable of carrying the load placed on it!

3.6 Adjusting the feet

In order to ensure that your appliance operates almost silently and vibration-free, it must stand level and balanced on its feet. The front feet of the appliance can be adjusted. Balance the appliance by adjusting the feet.

C

C

Do not use any tools to loosen the adjustable feet. Otherwise, they may be damaged.

Never unscrew the adjustable feet from their housings.

2 plastic pieces supplied together with the Operating Instructions prevent your appliance from slipping on wet and slippery surfaces. To install these plastic parts:

1. Tilt the appliance backwards.

2. Fit the plastic parts to the front adjustable feet. Press on the plastic parts to fix them in their places.

3. Check the balance of the appliance again and readjust the adjustable feet if necessary.

1. Loosen the feet by hand.

2. Adjust them until the appliance stands level and firmly.

Maximum length

Metal rigid duct

72 ft (21.9 m) + 2 elbows

To connect a ventilation duct;

1.Connect the air outlet metal duct to the spacer by turning it counter-clockwise.

2.Make the duct passages as shown in the illustration below.

3.7 Ventilation duct and connection

Ventilation duct ensures exhaust of air from inside the appliance.

The vented dryer has 1 air outlet.

A

Only rigid or flexible metal duct should be used for exhausting.

• In Canada, the diameter of the duct to be used should be 4” (102 mm). In United

States, the regulation for the required exhaust duct diameter must be followed.

Maximum duct length is given in the table below:

Dryer / User Manual

13 / EN

C

C

C

C

C

Exhaust of humid air from the dryer into the room is to be avoided.

It may damage the walls and furniture in the room.

The ventilation duct can be routed outdoors via a window or it can be connected to the air outlet in a bathroom.

Air outlet duct must be extended directly outdoors. There must be a limited number of elbows to not hinder air flow.

To prevent water accumulation in the duct, make sure it is not folded on the floor.

In Canada only those foil-type flexible ducts, if any, specificially identified for use with the appliance by the manufacturer shallbe used.

In the United States, only those foil-type flexible ducts, if any, specifically identified for use with the appliance by the manufacturer and that comply with the Outline for Clothes Dryer Transition Duct,

Subject 2158A, shall be used.

A

A

The appliance should not be vented into a chimney, a wall, a ceiling, an attic, a crawl space or a concealed space of a building.

Do not operate the appliance at the same time with heaters such as a coal or gas stove. Airflow may cause the chimney to flare up.

C

C

Care must be taken not to pinch or bend the ducts.

The end of the hose should not be bent, it should not be stepped on and it must not be folded between the drain and the dryer.

The total length of flexible metal duct shall not exceed 7.8 foot

(2.4 m).

The duct shall not be assembled with screws or other fastening means that extend inside the duct to catch lint.

A

The appliance should not be vented into a chimney, a wall, a ceiling, an attic, a crawl space or a concealed space of a building.

3.8 Destroying packaging material

A

Packaging material can be dangerous to children. Keep the packaging materials out of the reach of children or dispose of them accordingly.

Do not dispose of them together with normal domestic waste.

Packaging materials of your appliance are manufactured from recyclable materials.

Dryer / User Manual

14 / EN

4

Operating Instructions

A

WARNING: To reduce the risk of fire, electric shock, or personal injury, read the 2. IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.

LAUNDRY DRYING SYMBOLS

Drying

Symbols

Suitable for dryer

No Iron

Sensitive /

Delicate dry

Do not dry with dryer

Do not dry

Do not dryclean

Drying

Settings

Iron -

Dry or Steam

Iron at high temperature

IRON

200

0

C

Maximum temperature

392 0 F

4.1 First Use

•When operating your dryer for the first time check inside the drum for any foreign objects.

•Partly load the drum with wet clothes and let the dryer run for approximately 15 minutes.

This operation will clean the drum before loading garments.

•You may smell an unpleasant odor and excessive fiber/lint may accumulate during the first drying cycle.

4.2 Garments suitable for drying

Always follow the advice on garment labels.

Dry only laundry having a label stating that they are suitable for tumble-drying.

Iron at medium temperature

Iron at low temperature

150

0

C 110

0

C

302 0 F 230 0 F

4.3 Garments unsuitable for drying

•Items with metal attachments like, belt buckles and metal buttons can damage your dryer.

•Do not dry items like woolens, silk garments and nylon stockings, delicate embroidered fabrics, garments with metal accessories and items like sleeping bags in the dryer.

•Garments made of delicate and valuable fabrics as well as lace curtains can be permanently wrinkled. Do not dry these in your dryer!

•Do not dry items made of hermetic fibers such as pillows and quilts in the dryer.

•Garments made of foam or rubber may deform.

•Do not dry clothes containing rubber in the dryer.

•Do not dry clothes exposed to petroleum, oil, combustible or explosive agents in the dryer even if they are washed beforehand.

Dryer / User Manual

15 / EN

•Overly wet laundry or laundry with dripping water must not be put into the dryer.

4.4 Preparing clothes to be dried

•All laundry must be spun at the highest possible spin speed the washer allows for the textile type.

•Laundry may be tangled after washing.

Separate laundry before placing them into your dryer.

•Sort laundry according to their types and thicknesses. Dry similar types of laundry together.

4.5 Correct load capacity

Please consult the information in the “Program Selection” section.

Adding laundry to the dryer over the level shown in the figure is not recommended. Drying performance will be reduced when the dryer is overloaded. Doing so may damage your dryer and your clothes.

C

Place garments into the drum loosely so they won’t get tangled.

C

Large items (e.g. bed sheets, quilt covers, large tablecloths) may bunch-up. Stop the dryer 1 or 2 times during drying process to separate any bunched-up laundry.

The following weights are given as examples.

Home articles

Cotton quit covers

(double)

Weight (g)* Weight (lb)*

1500

Cotton quit covers (single) 1000

Bed sheets (double) 500

Bed sheets (single)

Large tablecloths

350

700

3 ¼

2 ¼

1 1/8

¾

1 ½

Small tablecloths

Tea napkins

Bath towels

Hand towels

Garments

Blouses

250

100

700

350

½

¼

1 ½

¾

Weight (g)* Weight (lb)*

Cotton shirts

Shirts

Cotton dresses

Dresses

Jeans

Handkerchiefs (10 pieces)

T-Shirts

350

700

100

125

150

300

200

500

¾

1 ½

¼

¼

3/8

5/8

½

1 1/8

*Dry laundry weight before washing.

Approximate weights of average home laundry type.

Dryer / User Manual

16 / EN

5

Operating the product

5.1 Control panel

5 4 3

Clean Filter Drying

Damp Dry

Regular Dry

End / Anticrease

Signal

Cancel

Child Lock

Mixed Fabric

Shirts

Mini

Start

Pause

Cancel 3 sec.

Refresh

Timed Programs

15 min

30 min

75 min

Jeans

2 1

Delicates

Damp Dry

Permanent Press

Regular Dry

Damp Dry

Regular Dry

Regular Dry +

Extra Dry

Cottons/Regular

On / Off

6

1. On/Off button

2. Program selector knob

3. Cancel Audio Warning

5.2 Loading door

•Open loading door.

•Place laundry items loosely into the dryer.

•Push the loading door to close. Make sure that no items are caught in the door.

Clean Filter Drying

Damp Dry

Regular Dry

End / Anticrease

Child Lock

Shirts

Mini

Mixed Fabric

Signal

Cancel

Start

Pause

Cancel 3 sec.

Refresh

Timed Programs

15 min

30 min

75 min

Jean

Delicates

Damp Dry

Permanent Press

Regular Dry

Damp Dry

Regular Dry

Regular Dry +

Extra Dry

Cottons/Regular

On / Off

7

kg

4. Program follow-up indicator

5. Filter cleaning warning LED

6. Start/Pause/Cancel button

5.3 Turning on the dryer

Prepare dryer for program selection by pressing the On/Off button.

C

Pressing the On/Off button does not mean the program has started.

Press the “Start/Pause/Cancel” button of the dryer to start the program.

Program selection

Extra Dry

Drying at a high temperature, only for cotton laundry. Thick and multi layered laundry (e.g. towels, linens, jeans) are dried in a way that they do not require ironing before being put away.

Regular Dry /

Ready to Wear

Normal laundry (e.g. tablecloths, underwear) are dried in a way that they do not require ironing before being put away.

Dryer / User Manual

17 / EN

Regular Dry+/ ready to Wear

Plus

Damp Dry /

Ready to Iron

Normal laundry (e.g. tablecloths, underwear) are dried in a way that they do not require ironing before being put away, but more than those in the ready to wear option.

Normal laundry (e.g. shirts, dresses) are dried in a way that they are ready to be ironed.

For optimum drying results, the dryer offers different program groups and additional options. There are automatic sensor programs for different types of textiles and timer programs.

Choose the appropriate program according to the type of textile from the table below. It also includes the level of dryness. Select the desired program with the program selector knob.

C

Always select the highest allowed temperature for drying. High temperature will ensure energy and time savings.

5.4 Main programs

Depending on the type of textile, the following main programs are available:

•Cottons / Regular (max. 7 kg)

Durable clothing can be dried with this program at a normal temperature. It is recommended for cotton items (e.g. bed sheets, quilt cover, underwear).

Jean

Shirts

Mini

Mixed Fabric

Delicates

Damp Dry

Permanent Press

Regular Dry

Refresh

Timed Programs

15 min

30 min

75 min

Damp Dry

Regular Dry

Regular Dry +

Extra Dry

Cottons/Regular

•Permanent Press / Synthetics

(max. 3.5 kg)

Less durable clothing can be dried with this program at a at a lower temperature compared to the cottons program. It is recommended for synthetic clothing (e.g. shirts, blouses, synthetic/cotton blended garments).

Jean

Shirts

Mini

Mixed Fabric

Delicates

Damp Dry

Permanent Press

Regular Dry

Damp Dry

Refresh

Timed Programs

15 min Regular Dry

30 min

75 min

Regular Dry +

Extra Dry

Cottons/Regular

C

Do not dry curtains or lace in the dryer.

Anti-creasing

A 2-hour anti creasing program to prevent laundry from creasing will be activated if the laundry is not taken out after the program ended. This program rotates the laundry in

10-minute intervals to prevent wrinkling.

5.5 Special programs

For special cases, there are also extra programs available:

Jean

Shirts

Mini

Delicates

Damp Dry

Permanent Press

Regular Dry

Mixed Fabric

Damp Dry

Refresh

Timed Programs

15 min Regular Dry

C

30 min

75 min

Regular Dry +

Extra Dry

Cottons/Regular

Additional programs may differ according to the model of your dryer.

•Automatic Dry / Mixed Fabric (max.

3.5 kg)

Mix program (Regular Dry) is for mixed loads with different types of fabrics. Mixed laundry can be dried at a lower temperature.

C

C

It is recommended to use a cloth bag to avoid certain delicate garments and laundry from being wrinkled or damaged.

Remove garments immediately from the dryer and hang them after the program ends in order to prevent wrinkling.

Dryer / User Manual

18 / EN

•Mini (max. 1.2 kg)

The cottons that are spun at high speeds in your washer can be dried with this program.

C

In order to obtain better results from the dryer programs, your laundry must be washed with suitable program and spun at the recommended spin speeds in your

washer.

•Shirts (max. 1.5 kg)

Dries the shirts in a more sensitive way so that they are less wrinkled and ironed easily.

C

Shirts may contain little amount of dampness at the and of the program. It is advised not to leave the shirts in the dryer.

•Jeans (max. 4 kg)

The jeans that are spun at high speeds in your washer can be dried with this program.

•Delicates (max. 1.75 kg)

Very delicate laundry (silk blouses, fine underwear, etc.) can be dried at a lower temperature that are suitable for drying or for laundry that is advised to be handwashed.

Jean

Shirts

Mini

Mixed Fabric

Damp Dry

Permanent Press

Regular Dry

Refresh

Timed Programs

15 min

30 min

75 min

Damp Dry

Regular Dry

Regular Dry +

Extra Dry

Cottons/Regular

•Refresh / Ventilation

Only cool air circulation is performed for 10 minutes without providing hot air.

Jean

Shirts

Mini

Mixed Fabric

Delicates

Damp Dry

Permanent Press

Regular Dry

Refresh

Timed Programs

15 min

30 min

75 min

Damp Dry

Regular Dry

Regular Dry +

Extra Dry

Cottons/Regular

Dryer / User Manual

5.6 Starting the Program

1. Press the “Start/Pause/Cancel” button to start the program.

2. The Start/Pause/Cancel button will light up to indicate that the program has started.

5.7 Progress of program

Progress of a running program is shown through the program follow-up indicator.

At the beginning of each program step, the related lamp will light up and the lamp of the completed step will turn off.

“Drying”:

- Drying level will be illuminated during the whole drying process until the dryness reaches “Damp Dry / Ready to Iron”.

“Damp Dry / Ready to Iron”:

- Lamp lights when the dryer reaches the

“Damp Dry / Ready to Iron” step and remains lit until the next step.

“Regular Dry / Ready to Wear”:

- Lamp lights when the dryer reaches the

“Regular Dry / Ready to Wear” step and remains lit until the next step.

“End / Anticrease”:

- The lamp lights when the program comes to an end and the anti-creasing function is activated.

C

If more than one lamp lights or flashes constantly, it means that there is a malfunction or a failure

(Please see Troubleshooting).

5.8 Changing the program after the program has started

Press and hold the Start/Pause/Cancel button for around 3 seconds to Cancel the program currently running.

Select another program by rotating the program knob.

Press the “Start/Pause/Cancel” button again to start the new program.

C

The program which is selected first will go on even if the program selector knob is moved and another program is selected while the dryer is operating. You must cancel the current program to change the drying program.

19 / EN

A

As the inside of the dryer will be excessively hot when you cancel the program when the dryer is running, activate the ventilation program to cool it down.

A

If the dryer is stopped during any drying program, and if the position of the program selector knob is changed, a tone will be heard (if the Cancel Audio Warning function is not selected). The dryer will not start even if the Start/Pause/

Cancel button is pressed, unless the program selector knob is returned to the initial program.

The paused program must be cancelled in order to change the drying program.

5.9 Adding/removing laundry in stand-by mode

In order to add or take out laundry after the start of the program;

1. Press the Start/Pause/Cancel button to switch the dryer to Pause mode. the drying process will stop.

2. Open the door at the Pause position and close it again after adding or taking out laundry.

3. Press the “Start/Pause/Cancel” button to restart the program.

C

Laundry may be added or taken out during a drying process, but interrupting drying continuously will extend the program’s time and increase energy consumption.

Therefore, it is recommended to add all laundry before the drying program is started.

5.10 Auxiliary functions

Cancel Audio Warning Signal

Your dryer will send out a tone when the program comes to an end. If you do not want to hear this, you need to press the Cancel

Signal button. The relevant lamp will light when this button is pressed and the tone will not activate when the program ends.

C

You can select this function either before or after the program starts.

5.11 Child-proof lock

There is a childproof lock to prevent any program interruption due to the pressing of keys while a program is running. The loading door and all buttons except the “On/Off” key on the panel are deactivated when the childproof lock is active.

In order to activate the childproof lock, pres the Start/Pause/Cancel and Cancel Audio

Warning buttons at the same time for 3 seconds.

To start a new program after the program ends or to stop a program, the childproof lock should be deactivated. To deactivate the childproof lock, press the same two buttons for 3 sec.

C

Child Lock

2 beeps when activating and 1 beep when deactivating the childproof lock will be heard.

Dryer / User Manual

20 / EN

5.12 Warning indicators

Filter cleaning

A warning lamp will light up to remind filter cleaning after a program finishes.

C

If the filter cleaning warning lamp flashes, please refer to

Troubleshooting.

5.13 End of program

The End/Anticrease and Clean Filter warning lamps on the program follow up indicator will light up when the program ends. The door can be opened and the dryer becomes ready for another load.

Press the On/Off button to shut down the dryer.

C

A 2-hour anti creasing program to prevent laundry from creasing will be activated if you do not take the laundry out after the program has ended.

A

Clean the filter after each load!

At the end of the program, it is recommended to press the On-Off button Off before unloading the dryer.

Dryer / User Manual

21 / EN

6

Technical Specifications

Model

Height (in)

Witdth (in)

Depth (in)

Height adjustment of feet (in)

Net weight (plastic front door usage) (lbs)

Net weight (glass front door usage) (lbs)

Voltage / Frequency

Connected load

Dry Load Capacity

Capacity

Vented Dryer with electronic sensor control

33 1/4

23 3/8

20 7/8

1/5

73

78,5

208-240V ~ 60 Hz

2000-2400 W

7kg / 15,5 lb

3,7 cu-ft

22 / EN

This appliance’s packaging material is recyclable. Help recycle it and protect the environment by dropping it off at recycling locations provided for this purpose. Your appliance also contains a large amount of recyclable material. It is marked with this label to indicate that used appliances should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on

Waste Electrical and Electronic Equipment. Contact your local government or your retailer for used appliance collection points closest to your home. We thank you for doing your part to protect the environment.

Dryer / User Manual

7

Quick Start-up Instructions

1. Open loading door.

5. Push the ON / OFF button to ON.

Delicates

Clean Filter Drying

Damp Dry

Regular Dry

End / Anticrease

Signal

Cancel

Child Lock

Shirts

Mini

Mixed Fabric

Start

Pause

Cancel 3 sec.

Refresh

Timed Programs

15 min

30 min

75 min

Jean

Delicates

Damp Dry

Permanent Press

Regular Dry

Damp Dry

Regular Dry

Regular Dry +

Extra Dry

Cottons/Regular

On / Off

Damp Dry

Permanent Press

Regular Dry

7kg

Damp Dry

Regular Dry

Regular Dry +

Extra Dry

Cottons/Regular

On / Off

2. Check filter.

6. Select the appropriate Program.

Jean

Shirts

Mini

Mixed Fabric

Refresh

Timed Programs

15 min

30 min

75 min

Delicates

Damp Dry

Permanent Press

Regular Dry

Damp Dry

Regular Dry

Regular Dry +

Extra Dry

Cottons/Regular

3. Load laundry loosely into the drum.

7. If necessary, select additional functions.

Signal

Cancel

Child Lock

Shirts

Mini

Mixed Fabric

Start

Pause

Cancel 3 sec.

Refresh

Timed Programs

15 min

30 min

75 min

4. Push loading door closed. Ensure no items are caught in the door.

Clean Filter Drying

Damp Dry

Regular Dry

End / Anticrease Signal

Cancel

Child Lock

Shirts

Mini

Mixed Fabric

Pause

Cancel 3 sec.

Refresh

Timed Programs

15 min

30 min

75 min

Jean

Delicates

Damp Dry

Permanent Press

Regular Dry

Damp Dry

Regular Dry

Regular Dry +

Extra Dry

Cottons/Regular

On / Off

7kg

8. Push the start button.

Shirts

Mini

Child Lock

Mixed Fabric

Signal

Cancel

Start

Pause

Cancel 3 sec.

Refresh

Timed Programs

15 min

30 min

75 min

Dryer / User Manual

23 / EN

8

User maintenance and cleaning instructions

8.1 Lint filter

Lint and fibers released from the laundry in to the air during the drying cycle are collected in the “Lint Filter”.

C

Fibres and lint are formed during wearing and washing.

WARNING: Always clean the filter after each drying cycle.

8.2 Sensor

There are humidity sensors in your dryer that detect whether the laundry is dry or not.

For sensor cleaning;

1. Open loading door.

2. Allow dryer to cool off if drying has been done recently.

3. Wipe the metal sensors with a soft cloth dampened with vinegar and dry the sensors afterwards.

To clean the Filter;

1. Open loading door.

2. Remove the lint filter by pulling it up and open the filter.

3. Clean lint, fiber, and by hand or with a soft piece of cloth.

4. Close the filter and put it back in place.

A

Clean the metal sensors at regular intervals (4 times a year).

WARNING: Never use solvents, cleaning agents or similar substances when cleaning as these might cause fire and/or an explosion!

C

You can clean the filter and filter area with a vacuum cleaner.

Clogging may arise on the filter surface after using your dryer for some time; if this occurs, wash the filter with water and dry it before using again.

Dryer / User Manual

24 / EN

9

Troubleshooting

Problem

Drying process takes too long.

Dryer does not switch on or the program does not start. Dryer does not start when set.

Program is interrupted for no reason.

Laundry has shrunk, become felted or has deteriorated.

Cause

Lint filter may not have been cleaned.

* It may not plugged in.

* The loading door may be ajar.

* Program may not be set or the

“Start/Pause/Cancel” button may not have been pressed.

* “Childproof lock” may be activated.

* The loading door may be ajar.

* Electricity may be cut off.

* A program not suitable for the laundry type might have been used.

Explanation / Solution

* Clean the lint filter.

* Meshes of the filter may be clogged. Wash with water.

* Make sure that the dryer is plugged in.

* Make sure the loading door is properly closed.

* Make sure the program has been set and it is not in “Pause” mode.

* Deactivate the childproof lock.

* Make sure the loading door is properly closed.

* Press the “Start/Pause/Cancel” button to start the program.

* Dry only the laundry which is suitable for drying in the dryer. First check the labels on the clothes.

* Select a program a suitable low temperature setting for the laundry type to dry the clothes.

“End / Anticrease”

LED flashes.

* The 2-hour anti creasing program to prevent laundry from wrinkling may have been activated.

* Turn off the dryer and take the laundry out of the dryer.

“End / Anticrease”

LED is on.

“Filter cleaning”

LED flashes.

* Program has come to an end.

* Lint filter may not have been cleaned.

The “Drying” LED flashes.

* A heat sensor failure has occurred. dryer ends the program without heating.

NOTE:

Call an authorized service if the problem persists.

* Turn off the dryerand take the laundry out of the dryer.

* Clean the lint filter.

* Meshes of the filter may be clogged. Wash with water.

* Turn off the dryer and remove the laundry. Call the authorized service.

Dryer / User Manual

25 / EN

1

0

Warranty Statement

This product is fully tested and went through official quality assurance inspections before leaving the original manufacturing site. Warranty terms for this

Blomberg household appliance is not valid if the product is altered, tampered, modifed, additional parts assembled, fixed and re-packed by an authorized distributor, servicer, a third party retailer, reseller or by any other unauthorized person(s).

26 / EN

Dryer / User Manual

Dryer / User Manual

27 / EN

www.blomberginternational.com

[email protected]

2960310298_EN/180117.1656