广告
广告
CIS-169
April 1995
CURRENT INFORMATION SUMMARY
Opening Instructions for the
KODAK MAX Flash One-Time-Use Camera
Wear eye protection when opening all cameras.
1
Wind off
Shutter Button
Thumbwheel
3
Remove Film
• Check the frame counter window.
• X’s must be visible.
• If not, grip camera, press shutter button, and turn thumbwheel untill film is fully rewound.
2
Open Film Door
• Use tool to bend cover back and remove film.
Remove Battery
4
Opened Camera with film and battery removed.
• Insert special tool into end slot (as shown).
CAUTION: This camera body contains a high voltage capacitor and circuit board. To avoid electric shock, do not pry apart the front and back sections of camera. Remove only film and battery from their respective compartments. If sections of the camera are separated, do not touch the circuit board.
Battery Exposed Film
• Repeat the same steps at opposite end of camera to remove battery.
5 • Place in recycle bin.
• Return to Kodak for recycling.
CAUTION: To avoid injury, use tool carefully.
©Eastman Kodak Company, 1996
CIS-169
Opening Instructions for the
KODAK MAX Flash
One-Time-Use Camera
Current Information Summaries provide information of limited or specific application. Responsibility for judging the timeliness and applicability of the information to a specific photographic use rests with the end user.
Consumer Imaging
EASTMAN KODAK COMPANY • ROCHESTER, NY 14650
Kodak and Max are trademarks.
Minor Revision 12-98
Printed in U.S.A.
广告