Peavey 13740 User's Manual

P E A V E Y E L E C T R O N I C S

The Scorpion

®

Series Speakers

Scorpion

®

S - 10825 - 8 Ohm

00013770

Scorpion

®

S - 12825 - 8 Ohm

00013750

The Scorpion ® Series 10, and 12 musical instrument loud speakers have earned a reputation of unequaled tonal response and reliability. Their use in a wide range of professional musical instrument systems has proven the Scorpion superiority.

Our exclusive field replaceable basket/cone assembly, first introduced in the Black Widow ®

Series, exemplifies the Scorpion’s many unique capabilities and advantages.

During modern performance situations, damaging D.C. voltages or other unwanted signal sources could possibly damage any loud speaker or cause complete failure.

Although this is not a common occurrence, the Peavey Scorpion

Series has been designed to deal with such incidents with our field replaceable basket/cone assembly.

In the event of speaker damage/ failure, the musician/sound crew can easily remove the magnet form the basket assembly with three bolts, clean the gap and utilize a new basket/cone assembly for replacement. This unique system saves time, money and, many times, the performance itself! The high power handing capability coupled with a large 2 ½” diameter ribbon aluminum voice coil allows any model Scorpion to produce very high sound pressure levels and maintain those levels over a long period of time.

The die cast aluminum frame and large magnetic assembly with vented pole piece ensures superior cooling, long life and durability.

The unique die cast frame of the

Scorpion also incorporates a

“square frame” design allowing these fine transducers to be utilized in a variety of small, compact enclosures. Because of the Scorpion’s “adaptability” to

SPECIFICATIONS

MOdEL

dIAMETER

IMPEdANCE

POwER CAPACITY

SENSITIVITY

USAbLE FREq. RANgE

VOICE COIL dIAMETER

VOICE COIL MATERIAL

NET wEIghT

Znom (Ohms)

Revc (Ohms)

Sd (square meters)

bL (T/M)

Fo (hz)

Vas (liters)

Cms (uM/N)

Mms (gm)

qms

qes

qts

Xmax (mm)

Le (mh)

SPL (1w 1m)

No (%)

Vd (cu in/ml)

Pmax (watts pgm)

disp. (cu. in /ml)

00013770

Scorpion® S - 10825 - 8 Ohm

10”

8 Ohms

800W peak

400W program

200W continuous

95.1 dB/1W 1m

80 Hz ~ 4 kHz

2.5” / 63.5 mm

Kevlar ® impreganated cellulose

7.5 lbs. / 3.4 kg

8

5.58

0.031

10.60

102.0

14.6

104.3

23.30

7.00

0.742

0.671

0.06

0.40

95.1

2.03

1.1 / 19

400

91 / 1491 many enclosure designs (infinite baffle, tuned and ported, etc.), the modern musician will find distinct advantages for utilizing our Scorpions over competing transducers. For example, full range response for guitar amplification or excellent high end/mid range response for bi-amped (or triamped) bass and key board rigs.

Our 10” and 12”, 8 ohm loudspeakers are now available to discriminating musicians who require superb sound reproduction, outstanding durability and high sound pressure levels.

00013750

Scorpion S - 12825 - 8 Ohm

12”

8 Ohms

800W peak

400W program

200W continuous

94.9 dB/1W 1m

60 Hz - 4 kHz

2.5” / 63.5 mm

Kevlar ® impreganated cellulose

7.8 lbs. / 3.54 kg

8

5.34

0.050

10.51

59.4

66.6

187.2

38.30

5.25

0.691

0.611

0.25

0.30

94.9

1.96

0.76 / 12.5

400

126 / 2064

APPLICATIONS

The S-10825 and S-12825

Scorpion ® loud speakers are ideally suited for lead and rhythm guitar applications. The extended bandwidth and excellent high frequency response provide superb performance for electric bass and bass bi-amp configurations, and because of their versatility, the

Scorpion Series also can be used for many keyboard systems.

Peavey

Scorpion speakers

®

feature convenient field-replaceable baskets. Replaceable baskets eliminate the need for re-coning speakers and the frustration and delays associated with the re-coning process. It only takes a few minutes to replace a basket and you are back in business. It just can’t get any easier than the four steps outlined here.

1

3

2

4

Baskets are replaced in four easy steps:

1 Remove three screws on back of magnet structure.

2 Lift the magnet structure off the basket frame.

3 Clean the voice coil “gap”.

4 Align screw holes, lower structure into place on new

basket frame, insert screws and tighten.

ONE YEAR LIMITED WARRANTY

NOTE: For details, refer to the warranty statement. Copies of this statement may be obtained online at www.peavey.com.

Features and specifications subject to change without notice.

Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian • MS • 39305

(601) 483-5365 • FAX (601) 486-1278 • www.peavey.com

©2011 Printed in the U.S.A. 10/11 80306038

Logo referenced in Directive 2002/96/EC Annex IV

(OJ(L)37/38,13.02.03 and defined in EN 50419: 2005

The bar is the symbol for marking of new waste and is applied only to equipment manufactured after

13 August 2005