Philips FWD570/21A User manual
Add to my manuals
49 Pages
Philips FWD570/21A is a powerful DVD Mini-HiFi System that offers a wide range of features for enjoying your favorite movies, music, and games. With its 110W of power, it delivers a rich and immersive sound experience that will fill your room with crystal-clear audio. The system is compatible with a variety of disc formats, including DVD, VCD, and MP3, so you can enjoy your entire collection. It also features a built-in FM/MW tuner, allowing you to listen to your favorite radio stations. With its sleek design and easy-to-use controls, the Philips FWD570/21A is the perfect addition to any home entertainment system.
advertisement
DVD Mini-HiFi System
FWD570
2
México
Es necesario que lea cuidadosamente su instructivo de manejo.
PRECAUCIÓN - ADVERTENCIA
No abrir, riesgo de choque eléctrico
ATENCIÓN
Verifique que el voltaje de alimentación sea el requerido para su aparato
Para evitar el riesgo de choque eléctrico, no quite la tapa.
En caso de requerir servicio, dirijase al personal calificado.
Descripción: Minisistema de Audio
Modelo : FWD570/ 21
Alimentación: 110–127 / 220–240V; ~50–60 Hz
Consumo: 110 W
Importador:
Domicilio:
Philips Mexicana, S.A. de C.V.
Av. La Palma No.6
Col. San Fernando La Herradura
Huixquilucan
Localidad y Tel: Edo. de México C.P. 52784
Tel.52 69 90 00
Exportador: Philips Electronics HK, Ltd.
País de Origen: China
Nº de Serie : ______________________________
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO
ANTES DE USAR SU APARATO.
AVISO IMPORTANTE
Philips Mexicana, S.A. de C.V. no se hace responsable por daños o desperfectos causados por:
– Maltrato, descuido o mal uso, presencia de insectos o roedores (cucarachas, ratones etc.).
– Cuando el aparato no haya sido operarado de acuerdo con el instructivo del uso, fuera de los valores nominales y tolerancias de las tensiones (voltaje), frecuencia (ciclaje) de alimentación eléctrica y las características que deben reunir las instalaciones auxiliares.
– Por fenómenos naturales tales como: temblores, inundaciones, incendios, descargas eléctricas, rayos etc. o delitos causados por terceros (choques asaltos, riñas, etc.).
CAUTION
Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
3
§
1
6
7
8
9
0
!
@
#
2
3
4
5
(
*
&
^
%
$
£
™
¡
)
∞
≤
#
3
4
PLUG & PLAY
-for tuner installation
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro-logic” and the double-D symbol are trademarks of Dolby Laboratories.
MANUFACTURED UNDER LICENSE FROM DIGITAL
THEATER SYSTEMS, INC . US PAT. NO 5,451,94;
5,956,674; 5,974,380; 5,978,762; 6,226,616;6,487,535
AND OTHER U.S. AND WORLDWIDE PATENTS ISSUED
AND PENDING. “DTS” AND “DTS DIGITAL SURROUND”
ARE REGISTERED TRADEMARKS OF DIGITAL THEATER
SYSTEMS, INC. COPYRIGHT 1996, 2003 DIGITAL
THE- ATER SYSTEMS, INC. ALL RIGHTS RESERVED.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by
Macrovision Corporation. Reserve engineering or disassembly is prohibited.
Index
English ------------------------------------------------ 6
Español --------------------------------------------- 50
Español --------------------------------------------- 94
---------------------------------------------- 138
5
6
Contents
General Information/
Maintenance
Features .................................................................. 8
Discs for playback ................................................ 8
Region codes
Supplied accessories ............................................ 8
Environmental information ................................ 9
Care and safety information .............................. 9
Connections
Step 1: Placing speakers .................................... 10
Step 2: Connecting speakers ............................ 10
Step 3: Connecting TV set ......................... 11~12
Using Video In jack (CVBS)
Using Component Video In jack (Pr Pb Y)
Using S-Video In jack
Using an accessory RF modulator
Step 4: Connecting FM/MW antennas ........... 13
Step 5: Connecting the power cord ............... 13
Step 6: Connecting a VCR or cable/satellite box ......................................................................... 14
Step 7: Connecting digital audio equipment . 14
Step 8: Connecting to game console ............. 14
Functional Overview
Controls on the system ............................. 15~16
Remote control ........................................... 16~17
Basic Functions
Plug and Play (for tuner installation) .............. 18
Demonstration mode ........................................ 18
Preparations
Step 1: Inserting batteries into the remote control .................................................................. 19
Step 2: Setting the clock ............................ 19~20
Step 3: Setting the TV set ................................. 20
Step 4: Setting speakers .................................... 21
Step 5: Setting language preference ................ 21
Game Operations
Preparation before use ..................................... 22
Starting Operation ............................................. 22
Disc Operations
Playing discs ......................................................... 23
Using the disc menu .......................................... 23
Basic playback controls ..................................... 24
Skipping to another title (track)/chapter
Fast search
Continuing playback from the last stop point
Selecting various mode functions ............ 24~25
Repeat play mode
Shuffle play mode
Repeating a section within a chapter/track
Programing favorite tracks ............................... 25
Changing discs during playback ....................... 26
Special DVD/VCD features ....................... 26~28
Changing subtitle language
Changing sound track language
Searching for a particular passage
Displaying the disc information during playback
Moving to another title (track) / chapter
Playing from a selected point
Playing in slow motion mode
Zooming in
Viewing from another angle
Advancing by frames
Setting Speaker
Checking the contents of DVD
Special VCD/SVCD features ............................ 28
Playback control (PBC)
MP3/ WMA/DivX/ Picture Disc
Operations
Playing MP3/ WMA/ Picture disc (Kodak, JPEG)
................................................................................ 29
Playing DivX disc ................................................ 30
DVD Menu Operations
Using the menu bar ........................................... 31
Using the setup menu ................................ 32~36
Setting the TV shape
Setting the screen saver
Setting the digital output
Setting the PCM output
Night mode - turning on/off
Test Tone
DivX(R) VOD
Changing the password
Restricting playback by setting parental level
Tuner Operations
Tuning to radio stations .................................... 37
Presetting radio stations ............................ 37~38
Automatic preset programming
Manual preset programming
Selecting a preset radio station ....................... 38
Deleting a preset radio station
Changing tuning grid .......................................... 38
Tape Operation/Recording
Tape playback ...................................................... 39
General information on recording ................. 39
Preparation for recording ................................ 40
Disc synchro recording ..................................... 40
Clock/Timer Operations
Viewing clock ...................................................... 41
Setting the timer .......................................... 41~42
Viewing timer ...................................................... 42
Setting the sleep timer ...................................... 42
Sound and Volume Controls
Sound control ..................................................... 43
Selecting surround sound
MAX sound
Selecting sound effect
Volume control ................................................... 43
Changing the volume level
Switching off the volume temporarily
Listening through headphones
Other Functions
Switching on/off .................................................. 44
Switching the system on
Switching the system to standby mode
Switching to eco power standby mode
Power saving automatic standby
Dimming the display .......................................... 44
Vocal ...................................................................... 44
Key control .......................................................... 45
Echo ....................................................................... 45
Karaoke ................................................................ 45
Listening to external sources .......................... 45
Contents
Specifications
........................................... 46
Troubleshooting
............................. 47~48
Glossary
......................................................... 49
7
8
General Information/Maintenance
Features
Your DVD Mini Hi-Fi System with 2-channel full digital amplifier creates the same dynamic sound qualities that you find in full-fledged cinemas and incorporates some of the best features in home theater technology.
Other features include:
Built-in DTS and Dolby Digital decoder, supporting virtual surround and stereo.
Additional Component Connections
Lets you connect other audio and audio/visual components to the system so you can use the system’s surround sound speakers.
Night mode
Lets you compress the dynamic range, reducing the difference in loudness between different sounds in Dolby Digital mode.
Parental control (rating level)
Lets you set a rating level so that your children cannot watch a DVD that has a rating higher than you set.
Sleep timer
Enables the system to switch to standby mode automatically at a preset time.
– Following formats can’t be supported
• The files like *.VMA, *.AAC, *.DLF, *.M3U,
*.PLS, *.WAV
• Non-English Album/Title name
• The discs recorded under Joliet format
• MP3 Pro and MP3 with ID3 tag
Region codes
DVDs must be labeled for ALL regions or for
Region 3 in order to play on this system. You cannot play discs that are labeled for other regions.
ALL 3
Notes:
– For mixed mode discs, only one mode will be selected for playback according to the recording format.
– If you are having trouble playing a certain disc, remove the disc and try a different one. Improperly formatted discs will not play on this system.
Discs for playback
Your DVD Mini Hi-Fi System will play:
– Digital Video Discs (DVDs)
– Video CDs (VCDs)
– Super Video CDs (SVCDs)
– Digital Video Discs + Rewritable (DVD+RW)
– Compact Discs (CDs)
– Picture (Kodak, JPEG) files on CDR(W)
– DivX(R) disc on CD-R(W):
– DivX 3.11, 4.x and 5.x
– WMA
– Supported MP3-CD format.
• ISO 9660 / UDF format
• Max. title/album name –12 characters
Max. title number plus album is 255.
• Max. nested directory is 8 levels.
• The max. album number is 32.
• The max. MP3 track number is 999.
• Supported sampling frequencies for MP3 disc:
32 kHz, 44.1 kHz, 48 kHz.
• Supported Bit-rates of MP3 disc are: 32, 64,
96, 128, 192, 256 (kbps).
Supplied accessories
– Composite video cable (yellow)
– Component video cables
(red/blue/green)
– Audio cables (white, red)
– FM wire antenna
– MW loop antenna
– Remote Control and two AA batteries
– AC power cable
– This instruction booklet and a Quick Use Guide
General Information/Maintenance
Environmental information
Any unnecessary packaging has been omitted.
We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).
Your system consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
Care and safety information
Avoid high temperatures, moisture, water and dust
● Do not expose the system, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). Always keep disc trays closed to avoid dust buildup on the lens.
● No objects filled with liquids, such as vases, shall be placed on the apparatus.
● No naked flame sources, such as lighted candles, should be placed on the apparatus.
Avoid condensation problem
● The lens may cloud over when the player is suddenly moved from cold to warm surroundings, making it impossible to play a disc.
Leave the player in the warm environment until the moisture evaporates.
Do not block the vents
● Do not operate the system in an enclosed cabinet and allow about 10 cm (4 inches) of free space all around the player for adequate ventilation.
● The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers table-cloths, curtains, etc.
Cleaning the cabinet
● Use soft cloth slightly moistened with a mild detergent solution.
Do not use a solution containing alcohol, spirits, ammonia or abrasives.
Cleaning discs
● To clean a CD, wipe it in a straight line from the center towards the edge using soft and lint-free cloth. A cleaning agent may damage the disc.
● Write only on the printed side of a CDR(W) and only with a soft felt-tipped pen.
● Handle the disc by its edge. Do not touch the surface.
Cleaning the disc lens
● After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.
Finding a suitable location
● Place the player on a flat, hard, stable surface.
Cleaning the head and the tape paths
● To ensure good recording and playback quality, clean the head A, the capstan(s) B, and pressure roller(s) C after every 50 hours of tape operation.
● Use a cotton swab slightly moistened with cleaning fluid or alcohol.
● You also can clean the head by playing a cleaning tape once.
10 cm
(4 inches)
C B A B C
Demagnetising the head
● Use a demagnetising tape available at your dealer.
10 cm
(4 inches)
DVD Mini Hi-Fi System
10 cm
(4 inches)
9
Connections
Step 1: Placing speakers Step 2: Connecting speakers
Speaker
(right)
Speaker
(left)
Place the front left and right speakers at equal distances from the TV set and at an angle of approximately 45 degrees from the listening position.
Notes:
– To avoid magnetic interference, do not position the front speakers too close to your TV set.
– Allow adequate ventilation around the DVD Mini
Hi-Fi System.
Connect the speaker wires to the SPEAKERS
(FRONT) terminals, right speaker to “ R” and left speaker to “ L”, coloured (marked) wire to “+” and black (unmarked) wire to “ –”. Fully insert the stripped portion of the speaker wire into the terminal as shown.
Speakers
Front Left (L)
Front Right (R)
Black
Black
+
White
Red
Notes:
– For optimal sound performance, use the supplied speakers.
– Do not connect more than one speaker to any one pair of +/- speaker terminals.
– Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.
IMPORTANT!
The type plate is located on the rear of the system.
To avoid overheating of the system, a safety circuit has been built in.
Therefore, your system may switch to
Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it.
10
Step 3: Connecting TV set
Connections
IMPORTANT!
– You only need to make one video connection from the following options, according to the capabilities of your TV system.
– S-Video or Component Video connection provides higher picture quality. These options must be available on your TV set.
– Connect the system directly to the TV set.
Using Video In jack (CVBS)
● Use the composite video cable (yellow) to connect the system’s VIDEO jack to the video input jack (or labeled as A/V In, Video In,
Composite or Baseband) on the TV set.
● To listen to TV channels through this system, use the audio cables (white/red) to connect AUX
IN (L/R) jacks to the corresponding AUDIO
OUT jacks on the TV set.
Using component Video In jack (Pr Pb Y)
● Use the component video cables (red/blue/ green) to connect the system’s Pr Pb Y jacks to the corresponding Component video input jacks
(or labeled as Pr/Cr Pb/Cb Y or YUV) on the TV set.
● To listen to TV channels through this system, use the audio cables (white/red) to connect AUX
IN jacks to the corresponding AUDIO OUT jacks on the TV set.
11
Connections
Using S-Video In jack
● Use the S-Video cable (not supplied) to connect the system’s S-VIDEO OUT jack to the S-
Video input jack (or labeled as Y/C or S-VHS) on the TV set.
● To listen to TV channels through this system, use the audio cables (white/red) to connect AUX
IN jacks to the corresponding AUDIO OUT jacks on the TV set.
IMPORTANT!
– If your TV set only has a single
Antenna In jack (or labeled as 75 ohm or
RF In), you will need a RF modulator in order to view the DVD playback via TV.
See your electronics retailer or contact
Philips for details on RF modulator availability and operations.
Using an accessory RF modulator
● Use the composite cable (yellow) to connect the system’s VIDEO jack to the video input jack on the RF modulator.
● Use the RF coaxial cable (not supplied) to connect the RF modulator to your TV’s RF jack.
12
Step 4: Connecting FM/MW antennas
MW antenna fix the claw into the slot
Connections
Step 5: Connecting the power cord
● Connect the supplied MW loop antenna to the
MW jack. Place the MW loop antenna on a shelf or attach it to a stand or wall.
● Connect the supplied FM antenna to the FM jack. Extend the FM antenna and fix its end to the wall.
For better FM stereo reception, connect an outdoor FM antenna to the FM ANTENNA terminal.
AUDIO
OUT
S-VIDEO
IN
COMPONENT
VIDEO IN
Pr/Cr
Pb/Cb
VIDEO IN
Y
~ AC MAINS
After everything is connected properly, plug in the AC power cord to the power outlet.
Never make or change any connection with the power switched on.
On the DVD Mini Hi-Fi System
“
AUTO INSTALL-PRESS PLAY” may appear on the display panel. Press 2; on the front panel to search and store all available radio stations or press
9 to exit (See page 37, Tuner Operations-
Presetting radio stations).
If your system is equipped with a
Voltage Selector, set the
VOLTAGE SELECTOR to the local power line voltage.
VOLTAGE
SELECTOR
110V~127V 220V~240V
Notes:
– Adjust the position of the antennas for optimal reception.
– Position the antennas as far as possible from your TV set, VCR or other radiation sources to prevent unwanted interference.
13
Connections
Step 6: Connecting a VCR or cable/satellite box
Step 7: Connecting digital audio equipment
AUDIO
OUT
COMPONENT
VIDEO IN
S-VIDEO
Pr/Cr
Pb/Cb
VIDEO IN
Y
1
A
3
2
4
Viewing and listening to playback
1
Connect the VCR or Cable/Satellite Box to the
TV system as shown.
2
Connect the system’s AUX IN jacks to the
AUDIO OUT jacks on the VCR or Cable/
Satellite box.
Before starting operation, press AUX/GAME on the remote control to select “AUX” in order to activate the input source.
Using the VCR for recording DVDs
Some DVDs are copy-protected. You cannot record or dub protected discs using a VCR.
3
Connect the system’s VIDEO jack to the VIDEO
IN jack on the VCR.
4
Connect the system’s LINE OUT (R/L) jacks to the AUDIO IN jacks on the VCR. This will allow you to make analog stereo (two channel, right and left) recording.
To view DVD playback while recording
You must connect the system to your TV system using the S-VIDEO (as shown above) or the
Component (Pr Pb Y) video connection.
Recording (digital)
Connect the system’s DIGITAL OUT jack to the
DIGITAL IN jack on a digital recording device
(DTS-Digital Theater System compatible, with a
Dolby Digital decoder, for example).
Before operation, set the DIGITAL OUTPUT according to the audio connection. (See Using the Setup Menu – Setting the digital output).
Step 8: Connecting to game console
IMPORTANT!
– Gameport inputs are for the game console only.
● Use the game console’s video cable (not supplied) to connect its video output to the
GAMEPORT- VIDEO terminal.
● Use the game console’s audio cable (not supplied) to connect its audio output to the
GAMEPORT- AUDIO L./ AUDIO R. terminals.
● Use the video cable (yellow) to connect the
VIDEO OUT terminal to the video input on the
TV for viewing.
Notes:
- On the TV, the Video Input jack is usually yellow and might be labeled A/V In, CVBS, composite or
Baseband.
- To avoid magnetic interference, do not position the front speakers too close to your TV.
14
Controls on the system
1
ECO POWER/ STANDBY ON
– to switch the system on, to Eco Power or
Standby mode.
2
DISPLAY SCREEN
– to view the current status of the system.
3
SOURCE
– to select the following:
DISC (DISC 1•2•3)
– to select disc tray 1, 2 or 3
TUNER (BAND)
– to select waveband: FM or MW.
TAPE (TAPE 1-2)
– to select tape deck 1 or 2.
AUX•GAME
– to select a connected external source: TV/CDR,
AUX (auxiliary) or Gameport mode.
4
PREV / PRESET / NEXT O
P
(TITLE – / +) for DISC .................... to select previous/next title, chapter or track during playback.
for TUNER ............... to select a preset radio station.
for CLOCK .............. to set the hour.
5
SEARCH•TUNING
1 / ¡
(ALBUM – / +) for DISC .................... to search backward/forward.
to select previous/next album in MP3/WMA stop mode (with MENU ON).
for TAPE ..................... to rewind or fast forward.
for TUNER ............... to tune to a lower or higher radio frequency.
for CLOCK .............. to set the minute.
6
MIC VOL./ MIC IN
– to adjust the mixing level for karaoke or microphone recording.
– to connect microphone jack.
7
38 (PLAY/PAUSE) for DISC .................... to start or interrupt playback.
for TAPE ..................... to start playback.
for PLUG&PLAY ... (on the system only) to initiate plug & play mode.
Functional Overview
8
DEMO•STOP
7 for DISC .................... to stop playback or to clear a programme.
for DEMO ................ (in Standby or ECO power
mode) to activate/deactivate demonstration.
for PLUG&PLAY ... (on the system only) to exit plug&play mode.
9
MAX SOUND
– to activate or deactivate MAX sound.
0
DISPLAY
– to display disc information during disc playback.
!
CLOCK
– to view or to set clock.
@
TIMER
– to view or to set timer.
#
TAPE DECK 1/ 2
$
0 OPEN
– to open the tape deck door.
%
AUTO REPLAY
– to select continuous playback in either AUTO
PLAY or ONCE mode only.
^
RECORD
– to start recording on tape deck 2.
&
VIDEO
– use a video cable to connect to your game console’s video output
AUDIO L./ AUDIO R.
– use an audio cable to connect to your game console’s left/right audio output.
*
SOUND
- to select various sound effect.
SURROUND
- to select various surround sound effect.
AUDIO
- to select the preferred language for audio
- to select AUDIO channel in karaoke mode.
MIX IT
- to mix the game sound with your favorite music from one of the music sources (DISC,
TUNER, TAPE1/2 or AUX)
GAME
- to select different type of equaliser setting for
Gameport (SPEED, PUNCH or BLAST).
GAME SOUND
- to adjust the game’s output volume level.
15
Functional Overview
(
;
– to connect headphones.
)
VOLUME
– to increase or decrease the volume.
¡
SENSOR
– point the remote control towards this sensor.
™
INTERACTIVE VU METER
– to show the VU (volume unit) meter in music or volume mode depending on the display mode selected.
£
DISC TRAYS
≤
OPEN•CLOSE
– to open or close the disc tray.
∞
DISC1/ DISC2/ DISC3
– to select a disc tray for playback.
§
DISC CHANGE
– to change disc(s).
Remote control
1
2
3
4
9
0
!
•
≥
§
∞
5
6
7
8
@
#
$
%
4
5
^
&
*
(
)
¡
™
£
≤
Notes:
– First, select the source you wish to control by pressing one of the source select keys on the remote control (DISC or TUNER, for example).
– Then select the desired function (
¡, O or
P for example).
1
SOURCE
– to select the relevant active mode: DISC1/2/3,
TUNER, TAPE1/2 or AUX/GAME.
– TUNER: toggles between FM and MW band.
– AUX/GAME: toggles between AUX and
GAMEPORT mode.
2
DISC MENU (disc mode only)
– to enter or exit the disc contents menu.
3
SYSTEM MENU (disc mode only)
– to enter or exit the system menu bar.
4
1 / ¡ / 5 / 4
– to select movement direction in disc contents menu/system menu bar.
– to tuner mode, to tune to lower or higher radio frequency. (
1 / ¡)
16
Functional Overview
– in Disc mode, press to fast reverse/forward the disc.
5
O/ P
– in Disc mode, press to skip to the previous/next chapter/track.
– in Tuner mode, to select a preset radio station number
6
PLAY/PAUSE 2;
– to start or interrupt disc playback.
– to resume playback from last stop point.
7
STOP 9
– to stop playing the disc.
8
REPEAT
– to select variations of continuous playback.
9
REPEAT A-B
– to repeat a specific section on a disc.
0
SUBTITLE
– to select desired subtitle.
!
AUDIO
– to select the audio channel.
@
POWER 2
– to switch to eco power or standby mode.
#
Numeric Keypad (0-9)
– to enter a track/title number of the disc.
– to enter a number of preset radio stations.
$
VOL +/-
– adjust the volume level.
– adjust key control/ ECHO level in karaoke mode.
– adjust speakers level in speaker setting mode.
%
OK
– to exit or confirm the selection.
^
GOTO
– to go direct to desired title, chapter or time.
&
PROGRAM
– in disc mode, to program favorite tracks.
– in tuner mode, to program favorite stations.
*
SHUFFLE
– to playback in random mode.
(
ECHO
– to adjust the echo level in karaoke mode.
)
KEY
– to change the tone level to suit your vocal range.
¡
DISPLAY (OSD)
– to view the time, title or chapter information.
™
MUTE
– to interrupt or resume sound reproduction.
£
DIM
– to select different brightness for VFD.
≤
MAX
– to activate or deactivate MAX sound.
∞
SOUND
– to select various sound effect.
§
CLOCK/TIMER
– to view clock/ timer.
– to enter timer setting mode.
≥
SURROUND
– to select various surround sound effect.
•
SLEEP
– to set the sleep (auto-off) timer function.
17
Basic Functions
Plug and Play (for tuner installation)
Plug and play allows you to store all available radio stations automatically.
If plug and play has not been installed
1
When you turn on the system, “
AUTO
INSTALL- PRESS PLAY” will be displayed.
2
Press
38 on the system to start installation.
➜ “
INSTALL” will be displayed and followed by
“
TUNER” and then “AUTO”.
➜ PROG will start to flash.
➜ The system will search all radio stations on the FM band, and then the MW band.
➜ All available radio stations with strong signal strength will be stored automatically.
➜ The system will stop searching when all available radio stations are stored or when the memory for 40 preset radio stations is full.
➜ The first preset radio station will play when
Plug and Play is completed.
Reinstalling plug and play
1
In Standby or Demonstration mode, press and hold
38 on the system until “AUTO
INSTALL-PRESS PLAY” is displayed.
2
Press
38 again to start installation.
➜ All previously stored radio stations will be replaced.
To exit without storing the plug and play
● Press
7 on the system.
Notes:
– When the power is turned on, the disc tray may open and close to initialise the system.
– If Plug and Play installation is not completed, it will be reinitiated the next time you power on the system.
– If there is no antenna connected, “
CHECK
ANTENNA” will scroll on the display.
– If auto-install is not preset, the system will store the radio station automatically.
Demonstration mode
The system has a demonstration mode that shows various features offered by the system.
Activating demonstration
● In Standby or ECO power mode, press and hold
DEMO•STOP
7 for more than 5 seconds to activate demo mode.
➜ “
DEMO ON” is displayed.
➜ Demonstration will begin.
Deactivating demonstration
● Press and hold DEMO•STOP
7 on the system until “
DEMO OFF” is displayed.
➜ The system will switch to Standby mode.
Note:
– Even if you remove the AC power cord and reconnect it to the wall socket, the demonstration will remain off until you activate it again.
18
Preparations
IMPORTANT!
– Make sure to complete the preparation procedures before operating the system.
Step 1: Inserting batteries into the remote control
3
Step 2: Setting the clock
The clock can be set in either 12-hour or 24hour mode (“
PM 00:00” or “00:00” for example).
1
The clock can be set in any source mode.
➜ If you have not set the clock, “--:--” will be shown on the display.
1
2
1
Open the battery compartment.
2
Place two batteries (Type R06 or AA) in the compartment with the correct polarity as indicated by “+” and “–” symbols.
3
Close the cover.
Using the remote control to operate the system
1
Point the remote control directly at the remote sensor (iR) on the front panel.
2
Select the source you wish to control by pressing one of the source select buttons on the remote control (for example
TAPE1/2, TUNER).
3
Then select the desired function (for example
2; , O or
P).
2
Press and hold CLOCK and “
00:00” blinks on the display.
➜ The current time is flashing on the display.
➜ If you have not set the clock, “--:--” will appear on the display.
3
Press O or
P on the system to set the hours.
4
Press
1 or ¡ on the system to set the minutes.
5
Press CLOCK to confirm your setting. Clock will be shown on the display for 5 seconds and then go back to it’s previous status. The system will store the setting automatically.
➜ The time setting becomes effective.
CAUTION!
– Remove batteries if they are exhausted or will not be used for a long time.
– Do not use old and new or different types of batteries in combination.
– Batteries contain chemical substances, so they should be disposed of properly.
To exit the setting without storing (in standby mode)
● Press
9 on the system to exit.
➜ “
CANCEL” will appear on the display.
● Press ECO POWER/ STANDBY ON to exit setting mode and go into ECO POWER mode.
● You can also press DISC, DISC1~3, DISC
CHANGE, OPEN/CLOSE to exit setting mode and go into disc mode.
● The system will also exit setting mode and go to
TUNER, TAPE or AUX/GAME mode when you press the corresponding source button.
Viewing the clock in any source mode
● When you have set the clock, press CLOCK on the system to view clock (or press CLOCK/
TIMER on the remote control). Press
DISPLAY on the system to toggle between 12hour and 24-hour modes.
➜ The time will be displayed for 5 seconds and then go back to it’s previous status.
19
Preparations
Notes:
– The clock will be cancelled when the power cord is disconnected or if a power failure occurs.
– During clock setting, if no button is pressed within 10 seconds, the system will exit the setting mode and go back to it’s previous status.
Step 3: Setting the TV set
IMPORTANT!
– Make sure you have completed all the necessary connections. (See Connections
– Connecting TV set)
1
Press DISC (DISC 1•2•3) on the front panel
(or press DISC 1/2/3 on the remote control).
2
Turn on the TV set and set to the correct Video-
In channel. You should see the blue Philips DVD background screen on the TV set.
➜ You may go to channel 1 on your TV set, then press the channel down button repeatedly until you see the Video In channel.
➜ Or, you can use the TV remote control to select different video modes.
➜ Or, set TV to channel 3 or 4 if you are using an RF modulator.
1
In disc mode, stop playback and press SYSTEM
MENU.
2
Select icon and press 4.
3
Press
1 / ¡ / 5 / 4 keys on the remote control to toggle through the functions and select your preferred option.
➜ Move to and press
¡.
➜ Move to “TV System” and press
¡.
AUTO
– Select this if the connected TV set is compatible with both NTSC and PAL (multi system). The output format will be consistent with the video signal of the disc.
NTSC
– Select this if the connected TV set is NTSC system. It will change the video signal of a PAL video disc and output to NTSC system.
PAL
– Select this if the connected TV set is PAL system. It will change the video signal of an
NTSC disc and output to PAL format.
4
Select an item and press OK.
To remove the menu
Press SYSTEM MENU.
Selecting the color system that matches your TV set
This DVD Mini Hi-Fi System is compatible with both NTSC and PAL. For the playback of a DVD disc on this DVD Mini Hi-Fi System, the color systems of the DVD, TV set and DVD Mini Hi-Fi
System should match.
2,3
1
4
TV SHAPE
TV SYSTEM
SCR SAVER
AUTO
NTSC
PAL
PBC
SET TO NTSC
20
Step 4: Setting speakers
IMPORTANT!
– This function is only available when you have connected other 3.1-channel speakers.
You can adjust the delay time (center and rear only) for individual speakers to optimize the sound effect according to your surroundings and setup. Speaker settings are only active on effective in the case of Multi-channel audio output.
Preparations
Step 5: Setting language preference
You can select your preferred language settings so that this DVD Mini Hi-Fi System will automatically switch to the language for you whenever you load a disc. If the language selected is not available on the disc, the language set by default will be used instead. But the menu language of the DVD Mini Hi-Fi System cannot be changed once selected.
PBC
1
2,3,4
5
PBC
1
In disc mode, press SYSTEM MENU.
2
Select icon and press 4.
3
Press
1 / ¡ / 5 / 4 keys on the remote control to select your preferred option.
➜ Move to and press ¡.
➜ Move to “CENTER DELAY” or “REAR
DELAY” and press
¡.
4
Press
¡ to set CENTER DELAY or REAR
DELAY values you want.
➜ Use longer delay time if the surround speakers are closer to the listener than the front speakers.
5
Press OK to confirm.
To remove the menu
Press SYSTEM MENU.
1
In disc mode, stop playback and press SYSTEM
MENU.
2
Select icon and press 4.
3
Press
1 / ¡ / 5 / 4 keys on the remote control to select your preferred option.
➜ Move to and press
¡.
➜ Move to one of the following and press
¡.
– Audio (disc’s soundtrack)
– Subtitle (disc’s subtitles)
– Disc Menu (on screen menu)
4
Press
5 / 4 to select a language and press OK.
5
Repeat steps 3~4 for other settings.
To remove the menu
Press SYSTEM MENU.
21
Game Operations
About Gameport
Gameport allows you to connect your game console to this mini system which enables you to enjoy a total game immersion experience through powerful sound output.
Preparation before use
VIDEO OUT
L AUDIO
R OUT
1
Connect your game console’s video and audio output to the GAMEPORT video and audio inputs respectively (See Connecting to game console).
2
Connect your TV’s video input to the VIDEO
OUT on the rear panel of the system.
3
Connect all the AC power cord to the power outlet.
Starting Operation
1
Turn on the TV and set to the correct video-in channel.
The TV’s video input channel may be called AUX
(iliary) IN, AUDIO/VIDEO (A/V) IN, EXT 1 etc.
These channels are often near channel 00 on your TV. Or, your TV remote control may have a button or switch that chooses different video modes. See your TV manual for details.
2
Press AUX/GAME until “
GAMEPORT” is displayed.
3
Press GAME on the system to select the type of sound setting that best suit the game: SPEED,
PUNCH, BLAST or OFF.
4
If you like to mix your game sound to your favorite music, press MIX IT to select the desired music source: DISC, TUNER, TAPE, AUX or OFF.
DISC : “
MIX-DISC”
TUNER : “
MIX-TU”
TAPE : “
MIX-TAPE”
AUX : “
MIX-AUX”
OFF : “
MIX-OFF”
Notes:
- To change the disc tray, you have to press DISC, then press DISC1/2/3 to select the desired disc tray.
- If “MIX-TU” is selected, press TUNER button to select FM or MW band.
- If “MIX-TAPE” is selected, press TAPE button to select TAPE 1 or TAPE 2.
5
If necessary, start playback of your chosen mixer source.
6
Start playing your favourite game.
To adjust the game console’s volume level
● Adjust GAME SOUND.
Notes:
- You can only activate GAME SOUND and MIX IT while in the game source mode.
- If your game console is switched on, the video image will always appear on the TV even though you are not in the gameport mode.
22
IMPORTANT!
– This system is designed for regular discs. Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc., as offered on the market, because they may jam the disc mechanism.
– Do not move the system during playback. Doing so may damage the system.
– Do not push on the disc tray or put any object other than disc on the disc tray. Doing so may cause the system to malfunction.
– DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc matches the regional code of your player.
– According to the format requirement of DVD or VCD, some operations may be different or restricted.
Disc Operations
4
Press OPEN•CLOSE to close the disc tray.
➜ “
READING DISC” will be displayed.
➜ In the stop mode, press DISC 1/2/3 on the remote control repeatedly to select DISC 1,
DISC 2 or DISC 3 cyclically.
● Some discs can play automatically. For discs with
Table Of Contents, a menu may appear on the
TV screen. When the menu is displayed, press
1 / ¡ / 5 / 4 keys to highlight your selection and press OK to confirm. To select a play option, press numeric keys (0-9).
➜ If a disc menu shows on the TV screen, see
“Using the Disc Menu”.
➜ If the disc is locked by parental control, you must enter your four-digital password (See
Changing the password).
5
Press
38 to start playback.
For MP3/ DivX/ WMA
● Load an MP3/ DivX/ WMA disc in the disc tray.
➜ “
MENU ON” will be shown on the display.
➜ Press DISC MENU to select menu on/off.
➜ In menu off mode, playback will start from the first track.
Playing discs
1
Press ECO POWER/ STANDBY ON 2 to switch on the system, and then press DISC to select disc mode.
2
Power on the TV system and set to the correct
Video In channel (See Setting the TV set).
➜ You should see the blue Philips DVD background screen on the TV set.
3
Press OPEN/CLOSE to open the disc tray and load a disc respectively in the first two disc trays..
To load the third disc, press DISC CHANGE.
➜ The disc tray will rotate until the empty tray is ready for loading.
➜ Make sure the disc label is facing up. For double-sided discs, load the side you want to play facing down.
Notes:
– Load discs with the label side facing up.
– To ensure good system performance, wait until disc reading is completed before proceeding.
Using the disc menu
For disc with Table Of Contents, a menu may appear on the TV screen once you load the disc.
To select a playback feature or item
● Press
1 / ¡ / 5 / 4 or numeric keys
(0-9) on the remote control, then press
38 or
OK to start playback.
To access or remove the menu
● Press DISC MENU on the remote control.
.TIMER
CLOCK
3
C D C H A N G E R
2
CD TAPE
RECORD
TIMER SET
DUBBING
BAND
SHUFFLE
TIMER
1
2
3
SHUFFLE
FMMW
SW
PRESET
RECORD
NR
FRONT
BACK
PROGRAM
DBB
AMPM
PLAY
MODE
TIMER
PROGRAM
SET CLOCK
SIDE
RDS
MODE
1
DEMO
VOLUME
23
Disc Operations
Basic playback controls
To play discs in all the disc trays
● Press
38.
➜ All the available discs will play once, then stop.
➜ During playback, the selected disc tray, elapsed playing time of the current track will appear on the display.
To start playback from a selected disc tray
● Press DISC 1, DISC 2 or DISC 3.
To interrupt playback
● Press
38.
● To resume playback, press
38 again.
To stop playback
● Press
7.
Skipping to another title (track) / chapter
● Press O
or P on the front panel or on the remote control repeatedly during playback to skip backward or forward. Each press will take the disc to the beginning of the previous or next title (track) / chapter.
To cancel the resume mode
● Press
7 again, or go into STANDBY, ECO
POWER, POWER OFF or press OPEN/
CLOSE key.
Notes:
– Resume information will be erased if you have changed the disc, opened the disc tray, changed source or disconnected the system from the power supply.
– Resume function is not available in PBC ON mode.
– This function is not available for MP3/WMA disc.
Selecting various mode functions
Repeat play mode
You can only select the Repeat play mode during playback.
For DVD - repeat chapter/title
● Press REPEAT repeatedly to select the following:
REPEAT CHAPTER ➜ REPEAT TITLE ➜
REPEAT OFF
Note:
– If the player has been set to repeat chapter
(track), pressing this button will replay the same chapter (track) from its beginning.
To go directly to any title (track) / chapter
● Use the numeric keys (0-9) to enter the number of the desired title (track) / chapter.
For CVD/SVCD/VCD/CD - repeat track/ disc
● Press REPEAT repeatedly to select the following:
REPEAT TRACK ➜ REPEAT DISC ➜ REPEAT
ALL ➜ REPEAT OFF
Fast search
1
Press
1 or ¡ on the front panel (or on the remote control) to fast reverse or forward the disc.
2
To resume normal play, press
38.
Continuing playback from the last stop point
● In stop mode and before the disc is removed, press
38 to resume playback from where you have stopped.
During program playback
● Press REPEAT repeatedly to select the following:
REPEAT ONE-PROGRAMMED TRACK ➜
REPEAT ALL PROGRAMMED TRACKS ➜
REPEAT OFF
For MP3 repeat - track/album/disc
MENU ON:
● Press REPEAT repeatedly to select the following:
REPEAT TRACK ➜ REPEAT ALBUM ➜ REPEAT
DISC ➜ REPEAT ALL ➜ REPEAT OFF
24
Disc Operations
MENU OFF:
● Press REPEAT repeatedly to select the following:
REPEAT TRACK ➜ REPEAT DISC ➜ REPEAT
ALL ➜ REPEAT OFF
Notes:
– When you open the disc tray, the Repeat function will be cancelled automatically.
– For CVD, SVCD and VCD 2.0 discs, the Repeat function is not available unless the PBC function is set to OFF.
– If discs of different formats are loaded, the
Repeat function is only available for the current disc.
Shuffle play mode
In this mode, all tracks in the current directory will be played once in a random order.
1
In stop mode, press SHUFFLE to play in a shuffle order.
➜ Playback will start from the first disc to the last disc.
2
Press SHUFFLE repeatedly to select the following:
SHUFFLE DISC ➜ REPEAT SHUFFLE DISC ➜
SHUFFLE ALL ➜ REPEAT SHUFFLE ALL ➜
SHUFFLE OFF
3
Press
38 to start shuffle play.
In shuffle playback mode:
● Press P button to select another track in a shuffle order.
4
Press
9 to stop shuffle playback.
To cancel Shuffle mode:
● In stop mode, press SHUFFLE repeatedly to select SHUFFLE OFF.
Notes:
– In Tuner, Tape or AUX/GAME mode, this button does not function.
– When the disc tray is opened, the Shuffle function will be cancelled automatically.
– In the Shuffle playback mode, the system only supports the same disc format.
– This function is only available for CD or VCD
(PBC OFF).
Repeating a section within a chapter/ track
You can play a specific section in a chapter/track repeatedly.
1
Press REPEAT A-B at your chosen start point.
2
Press REPEAT A-B again at your chosen end point.
➜ The passage will now repeat continuously.
3
To resume normal play, press REPEAT A-B again.
Note:
– The REPEAT A-B function can only be set within the same chapter or track.
Programing favorite tracks
You can play the contents of the disc in the order you want. At most 99 tracks can be stored.
1
Load the desired discs on the disc trays.
2
Press the DISC button to select the disc tray.
➜ Programming can only be done on the selected disc.
3
While playback is stopped, press PROGRAM to enter program mode.
➜ “
P 00 : 00” is displayed.
4
Use the numeric keys (0-9) to input the track number in the order you want.
➜ If you attempt to program more than 99 tracks, “
FULL” is displayed.
5
Press OK to store the track.
● Repeat steps 3-5 to store other tracks.
6
Press
38 to play the program.
7
To stop playback, press
7 once.
8
To exit the program mode, press
7 again.
Note:
– This function is not available for DVD or MP3/
WMA discs.
25
Disc Operations
Changing discs during playback
1
Press DISC CHANGE.
➜ The disc tray will open without interrupting playback.
2
To change the inner disc, press DISC
CHANGE again.
➜ The active disc will stop playing and the disc tray will close to retrieve the inner disc, then reopen with the inner disc accessible.
Special DVD/VCD features
Changing subtitle language
This operation only works on DVDs with multiple subtitle languages.
● Press SUBTITLE to select the desired language.
Changing sound track language
This operation only works on DVDs with multiple audio languages.
● Press AUDIO to select the desired language.
For CVD/SVCD/VCD:
● Press AUDIO to select the desired audio channels for sound. This function is only available for discs recorded with different channels:
LEFT VOCAL p RIGHT VOCAL p MONO
LEFT p MONO RIGHT p STEREO
Note:
– If your desired language is not set in the disc, you cannot select the language via this function.
TITLE REMAIN
00:01:15
CHAPTER ELAPSED
00:20:12
CHAPTER REMAIN
00:30:45
SINGELE REMAIN
00:01:15
Moving to another title (track) / chapter
Some discs may contain more than one title or chapter. If the disc has a title or chapter menu recorded on it, you can start playback from the
selected item.
1
Press GOTO on the remote control to display the message of title and chapter, use
1 or
¡ to highlight an item.
2
Use numeric keys (0-9) to select a desired title/chapter number.
3
Press OK to start playback.
Note:
– Selecting a title or chapter might not be possible on certain discs.
Searching for a particular passage
1
Press
1 or ¡ on the system (or on the remote control) to select fast reverse search or fast forward search respectively.
2
Press
1 or ¡ on the system (or on the remote control) repeatedly to select the required search speed:
For DVD or MP3/ WMA
(reverse): FR X2 p FR X4 p FR X6 p FR X8 p PLAY
(forward): FF X2 p FF X4 p FF X6 p FF X8 p PLAY
For CVD, SVCD, VCD or CD
(reverse): FR X1 p FR X2 p FR X3 p FR X4 p PLAY
(forward): FF X1 p FF X2 p FF X3 p FF X4 p PLAY
3
To resume normal play, press
38.
Displaying the disc information during playback
● In disc mode, press DISPLAY repeatedly to select the following display information:
DVD
TITLE 01/06 CHAPTER 05/19
00:20:01
VCD (PBC ON)
SINGLE ELAPSED
00:20:01
26
Disc Operations
Playing from a selected point
This function allows you to start playback at any chosen time on the disc.
For DVD
1
Press GOTO twice to activate time menu.
2
Enter hours, minutes and seconds from left to right in the time edit box using the numeric
keys (0-9).
➜ Each time an item has been entered, the next item will be highlighted.
3
Press OK to start playback.
For CVD, SVCD, VCD or CD
4
Press GOTO to activate time menu, “GOTO -- :
--” will be displayed on the TV screen.
5
Enter minutes and seconds from left to right in the time edit box using the numeric keys (0-
9).
➜ Each time an item has been entered, the next item will be highlighted.
6
Press OK to start playback.
Notes:
– In repeat disc or repeat all mode, you can search a desired time point.
– This function is not available for MP3/ WMA disc.
Some operations can be carried out directly via the menu bar on the TV screen without interrupting disc playback.
1
Press SYSTEM MENU.
➜ The menu bar will be displayed across the top of the TV screen.
2
Press
1 or ¡ to select:
SETUP MENU p SLOW p ZOOM p
ANGLE p STEP p PBC p SPEAKER
SETTING
3
Press 4 to select the highlighted icon and press
5 / 4 to select your preferred option.
4
Press OK to confirm a highlighted selection.
5
To exit, press SYSTEM MENU.
IMPORTANT!
Some operations may be different or restricted according to the disc format.
Refer to the jacket or case of the disc you are playing.
Note:
– When you press a button and appears on the
TV screen, this means the function is not available on the current disc or at the current time.
Playing in slow motion mode
PBC
SF x1/2
For DVD
1
Select from the menu bar and press 4 repeatedly to select the required slow motion speed:
SF X 1/2 p SF X 1/4 p SF X 1/8 p SR X 1/2 p SR X 1/4 p SR X 1/8 p PLAY
SF = slow forward
SR = slow reverse
For CVD, SVCD or VCD
1
Press 4 to select the required slow motion speed:
(forward): SF X 1/1 p SF X 1/2 p SF X 1/3 p PLAY
2
Press
38 to cancel the slow function.
Note:
– This function is not available for CD or MP3/
WMA disc.
Zooming in
This function allows you to enlarge the picture on the TV screen and pan through the enlarged image.
PBC
27
Disc Operations
1
Select from the menu bar and press 4 repeatedly to change the following zooming scale:
ZOOM X1.5 pZOOM X2 pZOOM X4 p ZOOM OFF
2
To pan through the enlarged image, press
SYSTEM MENU to exit and press
1 / ¡
/
5 / 4 buttons to move the zoomed picture left, right, up or down.
3
To exit ZOOM mode, select “ZOOM OFF” from the menu bar.
Viewing from another angle
If the playing DVD disc is recorded with multiple camera angles , the ANGLE mark on the setup page will be set to ON automatically. This allows you to view the picture from different angles.
Angle selection is determined by the disc format.
PBC
E
1
Select from the menu bar and press 4 to select subwoofer level, rear level, center level or
OFF.
2
Press VOL -/+ keys to adjust the speakers’ levels from -7dB to +8dB.
Checking the contents of DVD
1
Press DISC MENU on the remote control.
➜ If the current title has a menu, the menu will appear on the screen. Otherwise, the disc menu will be displayed.
2
Press
1 / ¡ / 5 / 4 to select the desired title or chapter, and then press
38 or OK.
➜ Playback start from the selected title or chapter.
3
Press and hold DISC MENU on the remote control to go to root menu of the disc.
Note:
– If no title menu or root menu is recorded in the
DVD disc, pressing this button will restart playback from the first track.
● Select from the menu bar and press
5 / 4 buttons to select the desired angle: 1/4, 2/4, 3/4 or 4/4.
➜ Playback changes to the selected angle.
Advancing by frames
PBC
Special VCD/SVCD features
Playback control (PBC)
PBC playback allows you to play Video CD interactively, following the menu on the display.
PBC
1
Select from the menu bar and press 4 to play the disc step by step (one frame each step).
2
To resume normal play, press
38.
Note:
– This function is not available for CD or MP3/
WMA disc.
Setting Speaker
● Select PBC from the menu bar and press 4 to toggle between PBC ON and PBC OFF.
Playing a disc with PBC function
● If PBC OFF, the system will start playback automatically.
● If PBC ON, the PBC menu (if available) will appear on the TV screen for selection. Use the
numeric keys (0-9) to enter your choice.
Note:
– This function is not available for CD or MP3/
WMA disc.
PBC
SPEAKER SETTING
28
MP3/ WMA/ DivX/ Picture Disc Operations
Playing MP3/ WMA/ Picture disc
(Kodak, JPEG)
IMPORTANT!
– You have to turn on your TV set and set to the correct Video In channel. (See
Setting the TV set.)
MP3/ WMA/ JPEG Picture disc
1
Load an MP3/WMA/ Picture (JPEG) disc.
➜ The disc reading time may exceed 30 seconds due to complexity of the directory/file configuration.
2
Playback will start automatically.
➜ The album/picture menu will appear on the
TV screen. If not, press DISC MENU on the remote control.
(example for MP3 disc menu)
SMART NAVI
Root
ROOT 0
TITLE NAME1 1
TITLE NAME2 2
TITLE NAME3 3
TITLE NAME4 4
TITLE NAME5 5
7
During JPEG or Kodak Picture disc playback, press KEY repeatedly to select different slideshow view options. There are 12 options for selection. The selected option will be displayed on the TV screen.
Kodak Picture disc
1
Load a Kodak Picture disc.
➜ The disc reading time may exceed 30 seconds due to complexity of the directory/file configuration.
2
Playback will start automatically.
3
Press 9.
➜ 9 thumbnail pictures will appear on the TV screen.
(example for picture disc menu)
1
4
7
2
5
8
3
6
9
3
Press
1 / ¡ / 5 / 4 on remote control to select a desired album, then press OK or 2; to confirm (for MP3/WMA disc only).
4
Press
1 / ¡ / 5 / 4 to select a desired title, then press OK or 2; to start playback.
● You can also use the numeric keys (0-9) to enter your choice.
5
To stop playback, press 9.
6
Press
1 or ¡ on the system to select previous/next album.
If the MP3/ WMA menu is switched off
● You can only play the current title by pressing
2; . While in playback mode, press O
or P to select the previous/next title.
➜ The title number will appear.
4
Press O
or P to view the previous/next page
(if available).
5
Press
1 / ¡ / 5 / 4 to move within the menu and press OK to select the desired picture to play.
6
Press 2; to start the slide-show playback.
During playback, you can:
● Press O
or P to select another title/picture in the current folder.
● Press
1 / ¡ / 5 / 4 on the remote control to rotate or flip the picture files.
● Select “ZOOM ON” and press
1 / ¡ on the system (or press and hold
1 / ¡ on the remote control) to zoom the picture in and out.
● Press 2; to pause/resume playback.
Note:
– No album search function in menu off mode.
29
MP3/ WMA/ DivX/ Picture Disc Operations
Notes:
– Due to the recording nature of Digital Audio
MP3 (DAM), only digital audio music will play.
– It is normal to experience an occasional “skip” while you are listening to your MP3 discs.
– For multi-session discs with different formats, only the first session can be read and played.
– DISC MENU does not function during Kodak
Picture disc playback.
6
Press
5 / 4 to highlight the movie file, and press OK to confirm.
➜ The playback will start accordingly.
7
During playback, you can zoom the picture by selecting zoom icon from the menu bar and press 4 to select ZOOMX2 or ZOOM OFF.
Playing DivX disc
There are two types of subtitle available on DivX disc: embedded subtitle and external subtitle.
1
Load a DivX disc.
➜ The DATA CD MENU appears on the TV screen.
Notes:
- During playback, press SUBTITLE button on remote control to select available font: SUBTITLE
1/1, ENCODING LATIN 1, ENCODING LATIN 2,
ENCODING CYRILLIC, SUBTITLE OFF.
- If an external subtitle has been selected, the DivX embedded subtitle will be deactivated.
- This model supports LATIN 1, LATIN 2, and LATIN
CYRILLIC fonts.
- LATIN 1 font supports the following languages:
Albanian, Basque, Catalan, Danish, Dutch, English,
Faeroese, Finnish, German, Icelandic, Irish, Italian,
Norwegian, Portuguese, Rhaeto-Roamanic, Scottish,
Spanish, Swedish, Afrikaans and Swahili.
- LATIN 2 supports the following languages:
Bosnian, Croatian, Czech, Hungarian, Polish,
Romanian, Serbian, Serbo-Croatian, Slovak,
Slovenian, Upper Sorbian and Lower Sorbian.
- LATIN CYRILLIC font supports the following languages: Russian, Ukrainian and Belarusian.
- Subtitle files with the following filename extension are supported: .sub, .srt and .smi.
When playing DivX disc with embedded subtitle
2
Press
5 / 4 to select DivX Movie, and then press OK to start playback.
3
When playing disc, press SUBTITLE button on the remote control to select: SUBTILTE 1/8 p
SUBTILTE 2/8 p SUBTILTE 3/8 p SUBTILTE
4/8 p SUBTILTE 5/8 p SUBTILTE 6/8 p
SUBTILTE 7/8 p SUBTILTE 8/8 p SUBTILTE
OFF.
Note:
- The maximum number of subtitle languages stipulated by the manufacturer is 8/8.
When playing DivX disc with external subtitle
4
Press
5 / 4 on the remote control to select an external subtitle option .
5
Press SUBTITLE to select subtitle file .
- “DivX SUBTITLE SELECTED” appears on the
TV screen.
30
Using the menu bar
You can continue some operations directly via the menu bar on the TV screen without interrupting the disc playback. But when you enter (SETUP MENU), the playback will pause.
2, 3
1
4
1
In disc mode, press SYSTEM MENU.
➜ The menu bar will appear across the top of the TV set screen.
PBC
2
Press the
1 / ¡ / 5 / 4 on the remote control to navigate in the menu.
➜ Press
1 / ¡ to move through the menu bar.
➜ Press 4 to enter the selection.
3
Press OK to confirm the selection.
➜ Playback will resume or begin automatically.
To remove the menu
Press SYSTEM MENU or OK.
IMPORTANT!
– Some operations may be different or restricted according to the disc format.
Refer to the jacket or care of the disc you are playing.
DVD Menu Operations x
Slow Motion
The slow motion speed will display. Press 4 repeatedly to select a reverse or forward slow motion speed.
To cancel the slow function, press 2;.
ZOOM
Press 4 repeatedly to select an enlarged picture ratio: 1.5, 2 or 4. You can press
1 /
¡
/ 3 / 4 to move within the enlarged picture on the TV set.
To resume normal playback, repeat the above step to select ZOOM OFF.
ANGLE
Press 4 to view the same scene from different angles if the DVD is recorded with multiangles.
STEP
Press 4 repeatedly to play forward the disc step by step (one frame every step). To cancel the step function, press 2;.
PBC PBC
Press 4 to select PBC ON or OFF, and then playback will stop automatically. (This function is not available for CD or MP3 discs.)
SPEAKER SETTING
Press 4 to select subwoofer level, rear level , center level or OFF cyclically. Press VOL -/+ keys to adjust its’ levels from -7dB to +8dB.
31
DVD Menu Operations
Using the setup menu (user preference settings)
This DVD setup is carried out via your TV set, enabling you to customize the DVD Mini Hi-Fi
System to suit your particular requirements.
Setting the TV shape
Make sure the format you need is available on the disc. If not, your setting will be invalid.
PBC
2, 3
1
4
1
In disc mode, press SYSTEM MENU.
➜ The menu bar will appear across the top of the TV screen.
2
Select icon and press
4 to enter the setup menu. Then press
3 / 4 to select one of the setup menu options and press
¡ to enter the menu.
➜ Playback will pause.
SETUP MENU
Picture Setup
Sound Setup
Language Setup
Feature Setup
3
Press
1 / ¡ / 5 / 4 on the remote control to navigate in the menu.
4
Press OK to confirm your selection.
➜ Playback will resume or begin automatically.
Removing the menu
Press SYSTEM MENU or OK.
Note:
– Some features of the Setup Menu are described in “Preparations”.
4:3 PS (Pan and Scan mode)
Select this if you have a conventional TV set and your DVD is not formatted for wide screen viewing. A wide picture will display on the whole
TV screen with a portion automatically cut off.
4:3 LB (Letterbox mode)
Select this if you have a conventional TV set and your DVD is formatted for wide screen viewing.
Black bars appear on the upper and lower portions of the TV screen.
16:9 (Wide-screen TV)
Select this if you have a wide-screen TV set (you must also set your wide screen TV to “full size”).
16:9
(Wide screen)
4:3 LB
(Letter Box)
4:3 PS
(Pan Scan)
Note:
– Setting the TV shape is only available when the disc is in the stop position.
32
Setting the screen saver
PBC
DVD Menu Operations
Setting the PCM output
PBC
If set to ON, the screen saver will be activated when you leave the system in stop or pause mode for 3 minutes. The default setting is ON.
Setting the digital output
Set Digital Output according to your optional audio equipment connections.
PBC
Off
Select this to deactivate the digital output.
All
Select this if you have connected the digital output to a piece of optional audio equipment that has a multichannel decoder.
PCM only
Select this if the external component is capable of processing digital signal input. After that, proceed to “Setting the PCM output”.
PCM 96K
Select this if the optional audio equipment is capable of processing digital signal input with sampling rate of 96 kHz. However, if the sound output is distorted or there is no sound, select
‘48 kHz’.
PCM 48K
Select this if the optional audio equipment is incapable of processing 96 kHz digital signal input, then convert to standard signal with sampling rate of 48 kHz.
Note:
– The PCM OUTPUT can be selected only when
PCM ONLY is selected.
Night mode - turning on/off
NIGHT MODE SET TO OFF
Off
Select this when you want to enjoy the surround sound with its full dynamic range.
On
Select this to level out the volume. High volume output will be softened and low volume output will be brought upward to an audible level. This feature is only available for movies with Dolby
Digital mode.
33
34
DVD Menu Operations
Test Tone DivX(R) VOD
Philips provide you the DivX(R) VOD (Video On
Demand) registration code that allows you to rent and purchase videos using the DivX(R)
VOD service.
For more information, visit: www.divx.com/vod.
PBC
The system will start testing the speaker from left, center, right, right surround, left surround, subwoofer, cyclically until you exit tone test. The availability of the various channels test depend on the number of speakers connected.
Notes:
– You can press
1 to exit test tone mode at any time.
– Main volume can be adjusted during tone test
DivX(R) VOD
1
In disc mode, press SYSTEM MENU.
2
Select icon and press 4.
3
Press
1 / ¡ / 5 / 4 on the remote control to navigate in the menu.
➜ Move to icon and press
¡.
➜ Move to “DivX (R) VOD”
➜ Press OK on the remote control, the registration code will appear.
- - Divx(R) REGISTRATION - -
Your registration code is : xxxxxxxx please use this code to register this player with the Divx(R) Vide On Demand service
This will allow you to rent and purchase videos using the Divx(R) Video On Demand format
To leam more go to www. divx.com/vod
DONE
4
Use the registration code to purchase or rent the videos from DivX(R) VOD service www.divx.com/vod.
Follow the instruction and download the video onto a CD-R for playback on this system.
Helpful Hint:
- All the download videos DivX(R) VOD can only be played back on this system.
Changing the password
You can change the four-digit code used as
Password.
DVD Menu Operations
4
Use the numeric keys (0-9) to enter your four-digit code.
➜ The password supplied by default is 1234.
➜ If you forget the four-digit code, press 9 four times, the system will change back to the default password.
● Go to “Password” and enter your new code.
Then, enter the same code again to confirm.
PBC
4
1,5
2,3
1
In disc mode, press SYSTEM MENU.
2
Select icon and press 4.
3
Press
1 / ¡ / 5 / 4 on the remote control to navigate in the menu.
➜ Move to icon and press
¡.
➜ Move to “PASSWORD” and press
¡.
PBC
CONFIRM CODE
CONFIRM NEW PASSWORD
5
Press SYSTEM MENU again to remove the menu.
35
DVD Menu Operations
Restricting playback by setting parental level
Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. This feature lets you set a playback limitation level. The rating levels are from 1 to 8 and are country specific. You can prohibit the playing of certain discs that are not suitable for your children or have certain discs played with alternative scenes.
4
Use the numeric keys (0-9) to enter the fourdigit code. You may have to enter the same code twice.
➜ If not successful, see Using the Setup Menu -
Changing the password.
5
Press 3 / 4 to select a rating level between 1-8 and press OK.
➜ DVDs rated above the level you select will not play unless you enter your four-digit password or choose a higher level rating. Select
‘No Parental’ to deactivate Parental level and have all discs play.
PBC
4
DivX(R) VOD
1,6
2,3,5
1
In disc mode, press SYSTEM MENU.
2
Select icon and press 4.
3
Use
1 / ¡ / 5 / 4 on the remote control to navigate in the menu.
➜ Move to icon and press
¡.
➜ Move to “PARENTAL” and press
¡.
PBC
6
Press SYSTEM MENU again to remove the menu.
Rating explanations
NO PARENTAL – It will play all discs.
8 ADULT – material for adults only; viewed only by adults due to graphic sexual scenes, violence, or language.
7 NC-17 – No children under age 17; not recommended for children under age 17.
6 PG-R – Parental Guidance – Restricted; recommended that parents restrict children under 17 from viewing or allow them to view only when supervised by a parent or adult guardian.
4 PG 13 – Material is unsuitable for children under age 13.
3 PG – Parental Guidance suggested.
1 G – General Audience; recommended as acceptable for viewers of all ages.
– Menu language
To set the screen display language. The default setting is English.
– Default
If RESET is selected, all the items in the setup menu will be reset to default setting, except
Parental Setting and Password.
36
IMPORTANT!
– Make sure FM and MW antennas are connected.
Tuning to radio stations
1
Press TUNER to select “
FM XX” or “MW XX”.
2
Press and hold
1 / ¡ on the system or on the remote control until the frequency indication starts to change, then release.
➜ The next radio station will be tuned automatically.
➜ i lights up for FM stereo reception.
3
To tune a weak station, press
1 / ¡ on the system or on the remote control to search until a radio station with sufficient signal strength is found.
Presetting radio stations
You can store up to 40 preset radio stations in the memory, starting from FM and followed by
MW bands.
Automatic preset programming
You can start automatic presetting from a selected preset number.
1
Press TUNER (BAND) to select TUNER mode.
➜ The current radio frequency will appear on the display.
To begin automatic preset from a desired preset number
● Press O / P or numeric keys (0-9) to select the desired preset number.
Tuner Operations
2
Press and hold PROGRAM until “
AUTO” appears on the display.
➜ PROG will start to flash.
➜ The system will start to search all radio stations on the FM band, then MW band.
➜ All radio stations with strong signal strength will be stored automatically.
➜ The system will stop searching when all available radio stations are stored or when the memory of 40 preset radio stations is full.
➜ The first preset radio station will then be played when completed.
To stop storing the automatic preset
● Press PROGRAM on the remote control or
7 on the system.
Note:
– If no preset number is selected, automatic preset will begin from “
01” and all your former presets will be overridden.
37
Tuner Operations
Manual preset programming
1
Press TUNER (BAND) repeatedly to select the desired tuner band: FM or MW.
2
Press and hold
1 / ¡ on the system or on the remote control to search a radio frequency.
3
Press PROGRAM.
➜ “
PROG” and “01” will display.
4
Press O / P or numeric keys (0-9) to select the desired preset number.
5
After selecting an address number, press
PROGRAM again to store the radio station.
● Repeat steps 3-5 to store other preset radio stations.
To stop storing the manual preset
● Press
7 on the system.
Note:
– If you attempt to store more than 40 preset radio stations, “FULL” will be displayed.
Changing tuning grid
In some countries, the frequency step between adjacent channels in the MW band is 9 kHz (10 kHz in some areas). The preset frequency step in the factory is 9 kHz.
1
Plug the AC power cord.
2
Press TUNER to select MW mode.
3
Press and hold 9 for more than 3 seconds.
➜ “
STEP XX K” appears.
Note:
– All preset stations will be lost and need to be reprogrammed.
Selecting a preset radio station
● In tuner mode, press O / P or use the
numeric keys (0-9) to select the desired preset number.
➜ The preset number, radio frequency, and waveband are displayed.
Deleting a preset radio station
1
Press O or P to select the preset radio station to be erased.
2
Press
7 on the system, “PRESET DELETED” appears on the display.
➜ The preset numbers of all other preset radio stations in the band with higher numbers are also decreased by one.
● Repeat steps 1-2 to erase other preset radio stations.
38
Tape Operation/Recording
IMPORTANT!
– Before playing a tape, check and tighten slack tape with a pencil. Slack tape may get jammed or may burst in the mechanism.
– Store tapes at room temperature and do not put them too close to a magnetic field (for example, a transformer, TV set or speaker).
Tape playback
1
Press
0 to open the tape deck door.
2
Insert a recorded tape and close the tape door.
● Load the tape with the open side down and the full spool to the left.
Rewinding or forwarding fast when playback is stopped
1
Press
1 or ¡ on the front panel or on the remote control.
2
Press
7 when you reach the desired passage.
Resetting tape counter number
● In stop mode, press
7.
General information on recording
● If you don’t intend to record via the microphone, unplug it to avoid unwanted recording source.
● For recording, only use tape of IEC type I(normal tape).
● The recording level is set automatically, regardless of the position of the Volume, Vocal,
Key control and so forth.
● The type is secured at both ends with leader tape. At the beginning and end of the tape, nothing will be recorded for seven seconds.
● To prevent accidental recording, break out the tab on the left shoulder of the tape side you want to protect.
3
Press TAPE (TAPE 1•2) or TAPE1/2 on the remote control repeatedly to select tape deck 1 or tape deck 2.
➜ The selected tape deck number is displayed.
4
Press
38 to start playback.
Stopping playback
● Press
7.
Changing the playback mode
● Press AUTO REPLAY repeatedly to select:
ONCE, AUTO REPLAY. The default setting is
ONCE.
AUTO REPLAY ... the tape will rewind automatically at the end of playback and replay. It will replay up to max. 10 times or until you press
9.
ONCE ........................... the selected side will be played once.
● Press REC in Disc, Tape, Tuner or AUX/Game mode, “
CHECK TAPE” will scroll on the display if there is no recordable tape in tape deck 2.
39
Tape Operation/Recording
IMPORTANT!
– Recording is permissible if copyright or other rights of third parties are not infringed upon.
– Recording is possible only in tape deck
2.
Preparation for recording
1
Load a recordable tape into tape deck 2 with the full spool to the left.
2
Prepare the source to the recorded.
DISC – load the disc(s)
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape deck 1 with the full spool to the left.
AUX/GAME – connect external equipment.
When recording is in progress
1
Press DISC, TAPE, TUNER or AUX/GAME to select the source.
2
Start to play the selected source.
3
Press REC to start recording.
To stop recording
● Press 9 on the system.
Disc synchro recording
1
Press DISC to select the disc.
● You can record programmed tracks in the order you want.
2
Press REC to start recording.
➜ “
REC” will flash, but the first 7 seconds of the start passage will not be recorded.
Selecting another track during recording
1
Press 2;.
2
Press O or P to select another track.
To stop recording
● Press 9.
➜ Recording and disc playback will stop simultaneously.
40
Clock/Timer Operations
Viewing the clock
The clock (if it is set) will be shown in Standby mode. Press CLOCK on the system to view clock in any source mode (or press CLOCK/
TIMER on the remote control).
● Press DISPLAY on the system to select 12hour or 24-hour mode.
➜ If the clock has not been set, “--:--“ will blink until you set the clock.
Setting the clock - see page 19.
Setting the timer
The system can switch to DISC, TUNER, TAPE mode automatically at a preset time, serving as an alarm to wake you up.
IMPORTANT !
– Before setting the timer, ensure that the clock is set correctly.
– The timer will always be switched on once set.
– The timer will not start if a recording is in progress.
– The volume of the timer will increase gradually from the minimum level to the last tuned volume level.
– The time can be set in 24-hour mode.
1
Press and hold TIMER or CLOCK/TIMER for more than 3 seconds,
➜ TIMER will start to flash.
➜ The selected source will be displayed.
2
Press DISC, TUNER or TAPE (1/2) to select timer mode. The corresponding source will appear on the display.
DISC - load the disc.
TUNER - Tune to the desired radio station.
TAPE 1 - Load the prerecorded tape into tape deck 1.
3
Press O or P on the system or remote control to set hours .
4
Press
1 or ¡ on the system or remote control to set the minutes.
5
Press TIMER or CLOCK/TIMER to store the setting.
➜ “
TIMER ON” will be displayed for 3 seconds.
➜ The timer will start to work.
➜ The timer will always be switched on once it has been set.
41
Timer Operations
To exit without storing the setting
● Press
7 on the system.
To deactivate the timer
● Press and hold TIMER or CLOCK/TIMER for more than 3 seconds.
➜ “
TIMER OFF” will be displayed.
Notes:
– If the source is disc mode, playback will begin with the first track of the last selected disc or other trays if the disc is empty. If all disc trays are empty, the system will automatically switch to Tuner mode.
– During timer setting, if no button is pressed within 10 seconds, the system will exit timer setting mode automatically.
– When the system is powered on, if the memorized volume level is less than 8, the system will automatically adjust to 8 increasingly. If the memorized volume level is more than 20, the system will adjust to 20.
– The timer will be cancelled when the power cord is disconnected or if a power failure occurs.
Viewing the timer
1
Press TIMER on the system (or press
CLOCK/TIMER on the remote control twice) to view timer in any source mode. Timer will be shown on the display for 5 seconds and then go back to it’s previous status.
2
If timer have not been set, “
NO TIMER” will be displayed for 5 seconds.
Setting the sleep timer
The sleep timer enables the system to switch to
Standby mode automatically at a preset time.
● Press SLEEP on the remote control repeatedly and stop at the desired preset turn-off time.
➜ Following options are available (time in minutes):
15 p30 p45 p60 p90 p120 pOFF p ......
➜ “
SLEEP” will show on the display panel unless “OFF” is selected.
To check or change the setting
● Press SLEEP once to show the remaining time before switching off. If you continue pressing the
SLEEP button, the next Sleep Timer option will appear on the display.
To cancel the sleep timer
● Press SLEEP repeatedly until “
OFF” is displayed, or press the ECO POWER/ STANDBY ON button.
42
Sound and Volume Controls
Sound control
Selecting surround sound
IMPORTANT!
– This DVD Mini HiFi system can only produce 2.1 channel surround sound.
● Press SURROUND on the system or on remote control to select surround or stereo mode.
➜ The availability of the various surround sound modes (Dolby Digital Surround and DTS
Surround) depend on the number of speakers used and the incoming sound information available on the disc.
Playing a CD/MP3/WMA/Divx or in
TUNER, TAPE or AUX mode
● You can select Digital Sound Control:
– DIGITAL, CLASSIC, ROCK, JAZZ.
Volume control
Changing the volume level
● Rotate VOLUME clockwise / anti-clockwise (or press VOL +/-) to increase or decrease the volume level.
➜ “
VOL XX” is displayed.
➜ “
VOL MAX” is displayed at maximum level.
● Press VOL +/- to adjust the level of the subwoofer, rear or center speaker during speaker setting carried out via system menu.
➜ The range is from -7dB to +8dB.
Notes:
– The default is Stereo.
– You cannot select the SURROUND SOUND mode if the SYSTEM MENU is turned on.
MAX sound
MAX sound provides the best mixture of various sound features.
● Press MAX SOUND to achieve the optimal sound.
➜ When MAX SOUND is activated, will blink and “MAX ON” will appear on the display for 3 seconds.
Note:
– When MAX SOUND is selected, other sound modes will be switched off automatically.
Selecting sound effect
The digital sound effect allows you to select from various preset modes that control the frequency bands of sound to optimize certain musical styles. It greatly enhances the excitement and enjoyment of your favorite music.
● Press SOUND repeatedly to select the available sound effect.
Playing a DVD/VCD
● You can select Virtual Ambience Control as follows:
– CONCERT, ACTION, SCI-FI, DRAMA.
Notes:
– The above operations are valid only if you have
5.1 speaker connection.
– You can press these buttons to adjust the speakers’ levels during speaker setting.
Switching off the volume temporarily
● Press MUTE.
➜ “
MUTE ON” is displayed.
Press MUTE again or increase the volume level to cancel the MUTE mode.
Listening through headphones
Connecting headphones to ; will switch off the speakers. The system will switch STEREO and the surround sound will be reduced to a stereo signal which is reproducible by standard headphones.
Disconnecting the headphones will switch on the speakers again. If you wish to enjoy surround sound again, switch the system back to surround sound.
43
Other Functions
Switching on/off
Switching the system ON
In ECO Power/ Standby/ Demonstration mode
● Press ECO POWER/ STANDBY ON
➜ The system will go back to its previous status.
● Press DISC, TUNER, TAPE, AUX/GAME
➜ The system will switch to the selected source.
Switching the system to STANDBY mode
In demonstration mode
● Press and hold DEMO•STOP
7 on the system.
In any other source mode
● Press and hold ECO POWER/ STANDBY
ON (or 2 on the remote control).
➜ The time will appear on the display when the system is in Standby mode.
Switching to ECO POWER mode
● Press ECO POWER/ STANDBY ON to
ECO POWER mode.
➜ “
ECO POWER” will be shown for 3 seconds and scroll from left to right on the display.
➜ The system will go to standby mode, and then to ECO Power mode in 5 seconds.
Power saving automatic standby
As a power-saving feature, the system will automatically switch to Standby mode if you don’t press any button within 30 minutes in the stop mode.
Dimming the display
● Press DIM repeatedly to select different levels of brightness for the display: HIGH, MID or LOW.
Vocal
This function allows you to fade out the original vocal from a karaoke. Press AUDIO key to select different audio modes.
For DVD karaoke discs:
AUDIO 1, AUDIO 2, AUDIO 1 VOCAL,
AUDIO 2 VOCAL.
For VCD karaoke discs:
LEFT VOCAL, RIGHT VOCAL, MONO LEFT,
MONO RIGHT or STEREO.
44
Other Functions
Key control
This feature allows you to change the key tone when you play a DVD or VCD disc.
● Press KEY.
➜ “KEY CONTROL ON” will be display on the
TV screen for 5 seconds.
➜ The Key Control indicator will flash when you press VOL +/- to change the key tone level.
➜ If you don’t adjust the key control level within
5 seconds, the indicator will turn off.
● Press KEY again to exit key control mode.
➜ “KEY CONTROL OFF” will be displayed on the TV screen for 5 seconds.
Echo
This feature allows you to add echo while singing or talking through a microphone.
● Press ECHO.
➜ “ECHO CONTROL ON” will be display on the TV screen for 5 seconds.
➜ Press VOL +/- to change the echo level between 1 and 8.
- Select OFF to switch off Echo.
● Press ECHO again to exit ECHO CONTROL mode.
➜ “ECHO CONTROL OFF” will be displayed on the TV screen for 5 seconds.
- You can also press OK to exit ECHO
CONTROL mode.
Notes:
– Echo will be disabled automatically when the microphone is unplugged.
– “
PLEASE INSERT MIC” is displayed on your
TV screen if you have not connected the microphone to the system in ECHO CONTROL ON mode.
Karaoke
Connect a microphone (not supplied) to the system to sing along with the music source.
1
Connect a microphone to the MIC jack.
➜ “
MIC” will appear on the display.
➜ “MICROPHONE PLUG IN” will display on your TV screen.
● Before connecting the microphone, set the microphone LEVEL to the minimum level to prevent howling.
2
Press DISC (1/2/3), TUNER, TAPE(1/2) or
AUX/GAME to select the source to be mixed and start playback.
3
Adjust the volume of the source through
VOLUME control.
4
Adjust the microphone volume through microphone LEVEL control.
Notes:
– Keep the microphone away from the speakers to prevent howling.
– “MICROPHONE PLUG OUT” will display on your TV screen when you plug out the microphone.
Listening to external sources
1
Connect the audio out terminals of the external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX IN terminals of your system.
2
Press AUX/GAME repeatedly to select AUX mode directly.
➜ “
AUX” or “GAMEPORT” will be displayed.
Notes:
– You are advised not to listen to and record from the same source simultaneously.
– All navigation sound control features are available.
45
Specifications
AMPLIFIER SECTION
Output power ..................................... 3300 W PMPO
Stereo mode (DIN) ..... 100 W + 100 W RMS
Surround mode (1 kHz) ...................... DIN OUT
Frequency Response . 180 Hz - 14 kHz / ± 3 dB
Signal-to-Noise Ratio .......... > 62dB (A-weighted)
Input Sensitivity
AUX/TV In ........................................................ 500 mV
Output Sensitivity
Headphone ............................. 800 mV – 1100 mV
Line Out ..................................... 400 mV – 600 mV
TUNER SECTION
Tuning Range ...........................................................................
......................... FM 87.5 – 108 MHz ( 50 kHz steps)
.......................... MW 531 – 1602 kHz (9 kHz steps)
....................... MW 530 – 1710 kHz (10 kHz steps)
26 dB Quieting Sensitivity .......................... FM 20 dB
26 dB Quieting Sensitivity .......... MW 3162 mV/m
Image Rejection Radio ................................... FM 25dB
................................................................................ MW 28 dB
IF Rejection Ratio ............................................ FM 60 dB
................................................................................ MW 24 dB
Signal-to-Noise Ratio ................................ FM ≥ 55 dB
........................................................................... MW ≥ 35 dB
MW Suppression Ratio ............................... FM 30 dB
Harmonic Distortion .......................... FM Mono 3 %
........................................................................ FM Stereo 3 %
..................................................................................... MW 5 %
Frequency Response ...........................................................
......................................... FM180 Hz – 10 kHz / ±6 dB
Stereo Separation ......................... FM 26 dB (1 kHz)
Stereo Threshold .......................................... FM 23.5 dB
TAPE SECTION
Frequency Response
Normal tape (type 1) .. 80 – 12500 Hz (8 dB)
Signal-to-Noise Ratio
Normal tape (type 1) .............................
≥ 46 dBA
Wow and flutter .........................................
≤ 0.4% DIN
DVD SECTION
Laser Type ................................................ Semiconductor
Disc Diameter .............................................. 12cm / 8cm
Video Decoding ........................... MPEG-2 / MPEG-1
Video DAC ................................................................ 10 Bits
Signal System ............................................... PAL / NTSC
Video Format ..................................................... 4:3 / 16:9
Video S/N ........................................... 56 dB (minimum)
Composite Video Output ................ 1.0 Vp-p, 75 Ω
S-Video Output ............................. Y - 1.0 Vp-p, 75 Ω
........................................................... C - 0.286 Vp-p, 75 Ω
Audio DAC .......................................... 24 Bits / 96 kHz
Frequency Response .... 4 Hz - 20 kHz (44.1kHz)
...................................................... 4 Hz - 22 kHz (48kHz)
...................................................... 4 Hz - 44 kHz (96kHz)
Digital Output .........................................................................
....... SPDIF (Sony Philips digital interface) Coaxial
PCM ...................................................................... IEC 60958
Dolby Digital/DTS ............... IEC 60958, IEC 61937
MAIN UNIT
Power Supply Rating ...... 110 - 127 / 220 - 240 V
........................................................... 50/60HZ Switchable
Power Consumption
Active ...................................................................... 110 W
ECO Power Standby ........................................ <1 W
Dimensions (w × h × d) . 265× 322 × 354 (mm)
Weight .......................................................................... 5.7 kg
SPEAKERS
Front speakers
System ................................................... 3-way, Bass reflex
Impedance ........................................................................ 3 Ω
Speaker drivers ............................................ 6.5” woofer,
................................................................................. 2” tweeter
Frequency response ........................ 50 Hz – 20 kHz
Dimensions (w × h × d) ...................................................
..................................................... 242 × 310 × 240 (mm)
Weight ............................................................. 3.72 kg/each
Specifications and external appearance are subject to change without notice.
46
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or
Philips for help.
Problem
No power.
Solution
✔ Check if the AC power cord is properly connected.
“
NO DISC” is displayed. ✔
✔
✔
✔
Check if the disc is inserted upside down.
Wait until the moisture condensed at the lens has cleared.
Replace or clean the disc, see “Maintenance”.
Use a readable disc or correctly recorded format
MP3-CD.
No picture.
✔
✔
✔
✔ Select the appropriate video input mode on the
TV set.
Check if the TV set is switched on.
Check the video connection.
Check if the system is securely connected.
Distorted or poor picture.
✔
✔
✔
Sometimes a slight picture distortion may appear.
This is not a malfunction.
Clean the disc.
Connect the system to the S-video input of your
TV set.
The aspect ratio of the screen cannot be changed even though you have set the TV shape.
✔
✔
The aspect ratio is fixed on the DVD disc.
The aspect ratio may not be changed for some
TV systems.
The DVD player does not start playback.
✔
✔
✔
✔
✔
✔
✔
Insert a readable disc.
Check the disc type, color system and region code.
Clean the disc.
Place the disc with the playback side down.
Press SYSTEM MENU to turn off the setup menu.
Cancel the parental control rating function or change the rating level.
Moisture has condensed inside the system.
Remove the disc and leave the system turned on for about an hour.
The system does not respond when the buttons are pressed.
✔ Disconnect the power plug from the jack, and insert again.
47
Troubleshooting
Problem
The language for the sound or subtitle cannot be changed when playing a DVD.
No image is output when a function is selected.
Sound cannot be heard or is of poor quality
Poor radio reception.
Recording or playback cannot be made
The tape deck door cannot open
Solution
✔
✔
Multi-language sound or subtitle is not recorded on the DVD.
Changing the language for the sound or subtitle is prohibited on the DVD.
✔
✔
Make sure the component is connected correctly.
Press the correct function button for the input source.
✔
✔
✔
✔
✔
✔
Adjust the volume.
Disconnect the headphones.
Check that the speakers are connected correctly.
Check if the stripped speaker wire is clamped.
If the system is in pause, slow motion or fast forward/reverse mode, press 2; to resume the normal play mode.
Make sure the MP3-CD was recorded within 32-
256 kbps bit rate with sampling frequencies at
48 kHz, 44.1 kHz or 32 kHz.
✔
✔
If the signal is too weak, adjust the antenna or connect an external antenna for better reception.
Increase the distance between the System and your TV set or VCR.
✔
✔
✔
Clean deck parts, see “Maintenance”.
Use only NORMAL tape.
Apply a piece of adhesive tape over the missing tab space.
✔ Remove and reconnect the AC power plug and switch on the system again.
✔ Check the speaker connections and location.
Left and right sound outputs are reversed.
The remote control does not function.
The display is dark
The timer is not working
The Clock/Timer setting is erased
✔
✔
✔
✔
✔ Point the remote control at the remote control sensor of the unit.
Reduce the distance to the player.
Remove any possible obstacles.
Replace the batteries with new ones.
Check that the batteries are loaded correctly.
✔ Press DIM again.
✔
✔
Set the clock correctly.
If recording is in progress, stop it
✔ Power has been interrupted or the power cord has been disconnected. Reset the clock/timer.
48
Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right.
Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is
4:3, and that of wide-screens is 16:9.
AUDIO OUT Jacks: Jacks on the back of the
DVD System that send audio to another system
(TV set, Stereo, etc.).
Bit Rate: The amount of data used to hold a given length of music; measured in kilobits per second, or kbps. Or, the speed at which you record. Generally, the higher the bit rate better the sound quality. However, higher bit rates use more space on a Disc.
Chapter: Sections of a picture or a music piece on a DVD that are smaller than titles. A title is composed of several chapters. Each chapter is assigned a chapter number enabling you to locate the chapter you want.
Component Video Out Jacks: Jacks on the back of the DVD System that sends high-quality video to a TV set that has Component Video In jacks (R/G/B, Y/Pb/Pr, etc.).
Disc menu: A screen display prepared for the selection of images, sound, subtitles, multi-angles, etc recorded on a DVD.
Digital: Sound that has been converted into numerical values. Digital sound is available when you use the DIGITAL AUDIO OUT COAXIAL or OPTICAL jacks. These jacks send audio through multiple channels, instead of just two channels as analog does.
Dolby Digital: A surround sound system developed by Dolby Laboratories containing up to six channels of digital audio (front left and right, surround left and right and center).
DTS: Digital Theater Systems. This is a surround sound system, but different from Dolby Digital.
The formats were developed by different companies.
JPEG: A still-picture data compression system proposed by the Joint Photographic Expert
Group, which features small decrease in image quality in spite of its high compression ratio.
MP3: A file format with a sound data compression system, “MPE” is the abbreviation of
Motion Picture Experts Group 1 (or MPEG-1)
Audio Layer 3. Through the MP3 format, one
CD-R or CD-RW can contain about 10 times as much data volume as a regular CD can.
Glossary
Multichannel: DVD is specified to have all sound tracks constitute one sound field.
Multichannel refers to a structure of sound tracks having three or more channels.
Parental control: A function of the DVD to limit playback of the disc by the age of the users according to the limitation level in each country.
The limitation varies from disc to disc; when it is activated, playback will be prohibited if the software’s level is higher than the user-set level.
PCM (Pulse Code Modulation): A system for converting analog sound signal to digital signal for later processing without data compression.
Playback control (PBC): Refers to the signal recorded on video CDs or SVCDs for reproduction control. By using screen menus recorded on a Video CD or SVCD that supports
PBC, you can enjoy interactive-type software as well as software having a search function.
Region code: A system allowing discs to be played only in preset regions. This unit will only play discs that have compatible region codes. You can find the region code of your unit from the product label. Some discs are compatible with more than one region (or ALL regions).
S-Video: Produces a clear picture by sending separate signals for luminance and the color. You can use S-Video only if your TV set has S-Video
In jack.
Sampling Frequency: Frequency of data sampling when analog data is converted to digital data. Sampling frequency numerically represents how many times the original analog signal is sampled per second.
Surround: A system for users to create realistic three-dimensional sound fields full of realism by arranging multiple speakers around the listener.
Title: The longest section of a picture or music feature on DVD, music, etc., in video software, or the entire album in audio software. Each title is assigned a title number enabling you to locate the title you want.
VIDEO OUT jack: Jack on the back of the
DVD System that sends video to TV.
49
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- 110W of power for a rich and immersive sound experience
- Compatible with a variety of disc formats, including DVD, VCD, MP3, and WMA
- Built-in FM/MW tuner for listening to your favorite radio stations
- Sleek design and easy-to-use controls
- Plug and Play feature for easy tuner installation
- Demonstration mode for showcasing the system's features
- Supports multiple language preferences for on-screen display and audio tracks
- Game mode for an enhanced gaming experience
Related manuals
Frequently Answers and Questions
How do I connect the speakers to the system?
How do I set the clock on the system?
How do I play a DVD?
How do I change the language of the on-screen display?
How do I connect the system to my TV?
advertisement
Table of contents
- 8 Features
- 8 Discs for playback
- 8 Supplied accessories
- 9 Environmental information
- 9 Care and safety information
- 10 Step 1: Placing speakers
- 10 Step 2: Connecting speakers
- 11 Step 3: Connecting TV set
- 13 Step 4: Connecting FM/MW antennas
- 13 Step 5: Connecting the power cord
- 14 Step 8: Connecting to game console
- 15 Controls on the system
- 16 Remote control
- 18 Plug and Play (for tuner installation)
- 18 Demonstration mode
- 19 control
- 19 Step 2: Setting the clock
- 20 Step 3: Setting the TV set
- 21 Step 4: Setting speakers
- 21 Step 5: Setting language preference
- 22 Preparation before use
- 22 Starting Operation
- 23 Playing discs
- 23 Using the disc menu
- 24 Basic playback controls
- 24 Selecting various mode functions
- 25 Programing favorite tracks
- 26 Changing discs during playback
- 26 Special DVD/VCD features
- 28 Special VCD/SVCD features
- 30 Playing DivX disc
- 31 Using the menu bar
- 32 Using the setup menu
- 37 Tuning to radio stations
- 37 Presetting radio stations
- 38 Selecting a preset radio station
- 38 Changing tuning grid
- 39 Tape playback
- 39 General information on recording
- 40 Preparation for recording
- 40 Disc synchro recording
- 41 Viewing clock
- 41 Setting the timer
- 42 Viewing timer
- 42 Setting the sleep timer
- 43 Sound control
- 43 Volume control
- 44 Switching on/off
- 44 Dimming the display
- 44 Vocal
- 45 Key control
- 45 Karaoke
- 45 Listening to external sources