Programing favorite tracks. Philips FWD570/21A, FWD570/21M, FWD570

Disc Operations

MENU OFF:

● Press REPEAT repeatedly to select the following:

REPEAT TRACK ➜ REPEAT DISC ➜ REPEAT

ALL ➜ REPEAT OFF

Notes:

– When you open the disc tray, the Repeat function will be cancelled automatically.

– For CVD, SVCD and VCD 2.0 discs, the Repeat function is not available unless the PBC function is set to OFF.

– If discs of different formats are loaded, the

Repeat function is only available for the current disc.

Shuffle play mode

In this mode, all tracks in the current directory will be played once in a random order.

1

In stop mode, press SHUFFLE to play in a shuffle order.

➜ Playback will start from the first disc to the last disc.

2

Press SHUFFLE repeatedly to select the following:

SHUFFLE DISC ➜ REPEAT SHUFFLE DISC ➜

SHUFFLE ALL ➜ REPEAT SHUFFLE ALL ➜

SHUFFLE OFF

3

Press

38 to start shuffle play.

In shuffle playback mode:

● Press P button to select another track in a shuffle order.

4

Press

9 to stop shuffle playback.

To cancel Shuffle mode:

● In stop mode, press SHUFFLE repeatedly to select SHUFFLE OFF.

Notes:

– In Tuner, Tape or AUX/GAME mode, this button does not function.

– When the disc tray is opened, the Shuffle function will be cancelled automatically.

– In the Shuffle playback mode, the system only supports the same disc format.

– This function is only available for CD or VCD

(PBC OFF).

Repeating a section within a chapter/ track

You can play a specific section in a chapter/track repeatedly.

1

Press REPEAT A-B at your chosen start point.

2

Press REPEAT A-B again at your chosen end point.

➜ The passage will now repeat continuously.

3

To resume normal play, press REPEAT A-B again.

Note:

– The REPEAT A-B function can only be set within the same chapter or track.

Programing favorite tracks

You can play the contents of the disc in the order you want. At most 99 tracks can be stored.

1

Load the desired discs on the disc trays.

2

Press the DISC button to select the disc tray.

➜ Programming can only be done on the selected disc.

3

While playback is stopped, press PROGRAM to enter program mode.

➜ “

P 00 : 00” is displayed.

4

Use the numeric keys (0-9) to input the track number in the order you want.

➜ If you attempt to program more than 99 tracks, “

FULL” is displayed.

5

Press OK to store the track.

● Repeat steps 3-5 to store other tracks.

6

Press

38 to play the program.

7

To stop playback, press

7 once.

8

To exit the program mode, press

7 again.

Note:

– This function is not available for DVD or MP3/

WMA discs.

25