Barco HDX-W14 Reference Manual

R5905447/03

08/06/2015

Command Catalog

1011000110100100101100101001010101010010100101

1010011001010100100100100100111010100101000101

0110110001001010011001100101010010010010101010

1011000110100100101100101001010101001001001010

1010011001010100100100100100111010100100101010

0110110001001010011001100101010010100101001010

1011000110100100101100101001010101110101100101

1010011001010100100100100100111011001001010101

0110110001001010011001100101010010100100110101

1011000110100100101100101001010101010010100101

1010011001010100100100100100111010100101000101

1011000110100100101100101001010101001001001010

1010011001010100100100100100111010100100101010

0110110001001010011001100101010010100101001010

1011000110100100101100101001010101110101100101

1010011001010100100100100100111011001001010101

Reference manual

For HDX W12/W14/W18

Barco NV

Noordlaan 5, B-8520 Kuurne

Phone: +32 56.36.82.11

Fax: +32 56.36.883.86

Support: www.barco.com/en/support

Visit us at the web: www.barco.com

Printed in Belgium

Copyright ©

All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a retrieval system without the prior written consent of Barco.

Changes

Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied warranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time without notice.

This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the information in this publication; these changes are incorporated in new editions of this publication.

The latest edition of Barco manuals can be downloaded from the Barco web site www.barco.com

or from the secured Barco web site https://www.barco.com/en/signin .

Trademarks

Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of their respective holders.

All brand and product names mentioned in this manual serve as comments or examples and are not to be understood as advertising for the products or their manufacturers.

Table of contents

TABLE OF CONTENTS

1. Introduction ......................................................................................................... 7

1.1

About this document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2. The Barco Projection Protocol................................................................................... 9

2.1

The Barco Projection Protocol explained . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.2

Ethernet communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.3

RS232/RS422/USB-B communication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.4

The command representation in this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

3. Commands .........................................................................................................17

3.1

3D dark time adjustment, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.2

3D dark time adjustment, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3.3

3D Double/Tripple Flash limit, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.4

3D Double/Tripple Flash limit, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3.5

3D field dominance, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

3.6

3D field dominance, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

3.7

3D L/R Output Reference Delay, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

3.8

3D L/R Output Reference Delay, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

3.9

3D mode, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

3.10 3D mode, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

3.11 3D status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 29

3.12 3D status, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

3.13 3D Sync Loop status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

3.14 3D Sync Loop status, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

3.15 brightness possible, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 33

3.16 clear test pattern, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

3.17 contrast possible, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 35

3.18 decrement blanking bottom, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

3.19 decrement blanking left, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

3.20 decrement blanking right, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

3.21 decrement blanking top, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

3.22 decrement brightness, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

3.23 decrement color balance blue green ratio, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

3.24 decrement color balance red green ratio, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

3.25 decrement contrast, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

3.26 decrement dimming value, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

3.27 decrement gamma, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

3.28 decrement input black balance , write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

3.29 decrement input white balance , write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

3.30 decrement phase, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

3.31 decrement saturation, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

3.32 decrement sharpness, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

3.33 decrement shutter, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

3.34 decrement tint, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

3.35 freeze, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

3.36 function read electronic convergence, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

3.37 function read input balance pattern status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

3.38 function write electronic convergence , write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

3.39 get aspect ratio file, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

3.40 get aspect ratio height, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

3.41 get aspect ratio width, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

3.42 get baudrate, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

3.43 get blanking bottom, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

3.44 get blanking left, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 62

3.45 get blanking right, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 63

3.46 get blanking top, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

3.47 get brightness, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 65

3.48 get clamp delay, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

3.49 get clamp width, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

3.50 get color balance blue green ratio, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

3.51 get color balance red green ratio, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

3.52 get color temperature, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

3.53 get common address, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

3.54 get contrast, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

3.55 get contrast enhancement, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

3.56 get dimming, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

3.57 get ext contrast, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 75

3.58 get ext contrast enhancement , read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

3.59 get ext gamma, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

3.60 get ext phase, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

3.61 get ext sharpness, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

3.62 get freeze status, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 80

3.63 get gamma, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

R5905447 COMMAND CATALOG 08/06/2015 1

Table of contents

2

3.64 get gamma (text value), read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

3.65 get input black balance, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

3.66 get input white balance, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

3.67 get intensity, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

3.68 get ir hold off configuration, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

3.69 get lamp status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

3.70 get lamp status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

3.71 get layout, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

3.72 get lcd backlight level, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

3.73 get lcd time out, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

3.74 get lock, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

3.75 get no signal color logo, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

3.76 get no signal shutdown delay, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

3.77 get no signal shutdown status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

3.78 get output window native resolution status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

3.79 get output window parameters, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

3.80 get output window status, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

3.81 get P7 TCGD blue X, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

3.82 get P7 TCGD blue Y, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

3.83 get P7 TCGD cyan X, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

3.84 get P7 TCGD cyan Y, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

3.85 get P7 TCGD green Y, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

3.86 get P7 TCGD magenta X, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

3.87 get P7 TCGD magenta Y, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

3.88 get P7 TCGD red X, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

3.89 get P7 TCGD red Y, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

3.90 get P7 TCGD selection, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

3.91 get P7 TCGD white X, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

3.92 get P7 TCGD white Y, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

3.93 get P7 TCGD yellow X, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

3.94 get P7 TCGD yellow Y, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

3.95 get phase, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

3.96 get projector address, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

3.97 get same lens settings status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

3.98 get saturation, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

3.99 get scan/orientation configuration , read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

3.100 get sharpness, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

3.101 get shutter status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

3.102 get soft edge black level, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120

3.103 get soft edge size black level bottom, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121

3.104 get soft edge size black level left, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122

3.105 get soft edge size black level right, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123

3.106 get soft edge size black level top, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124

3.107 get soft edge size bottom, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125

3.108 get soft edge size left, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126

3.109 get soft edge size right, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127

3.110 get soft edge size top, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128

3.111 get soft edge status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129

3.112 get source, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130

3.113 get source extended, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131

3.114 get text on, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134

3.115 get tint, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135

3.116 get warp axis position, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136

3.117 get warp file, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137

3.118 get warp grid size, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138

3.119 get warp hierarchic keystone in X direction, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139

3.120 get warp hierarchic keystone in Y direction, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140

3.121 get warp hierarchic linearity in X direction, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141

3.122 get warp hierarchic linearity in Y direction, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142

3.123 get warp hierarchic point shift, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143

3.124 get warp keystone horizontal. Deprecated from version 1.6, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144

3.125 get warp keystone vertical. Deprecated from version 1.6, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145

3.126 get warp line shift horizontal. Deprecated from version 1.6, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146

3.127 get warp line shift vertical. Deprecated from version 1.6, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147

3.128 get warp linearity horizontal. Deprecated from version 1.6, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148

3.129 get warp linearity vertical. Deprecated from version 1.6, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

3.130 get warp pin barrel horizontal. Deprecated from version 1.6, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150

3.131 get warp pin barrel vertical. Deprecated from version 1.6, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151

3.132 get warp point shift. Deprecated from version 1.6, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152

3.133 get warp rotation, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .153

3.134 get warp scale horizontal., read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154

3.135 get warp scale vertical., read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .155

3.136 get warp shift horizontal, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .156

3.137 get warp shift vertical, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157

3.138 get warp status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .158

3.139 get warp X1. Deprecated from version 1.6, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159

R5905447 COMMAND CATALOG 08/06/2015

Table of contents




3.143 get warp Y1. Deprecated from version 1.6, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163




3.147 get window selection, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167

3.148 increment blanking bottom, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168

3.149 increment blanking left, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169

3.150 increment blanking right, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .170

3.151 increment blanking top, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .171

3.152 increment brightness, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172

3.153 increment color balance blue green, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173

3.154 increment color balance red green, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174

3.155 increment contrast, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175

3.156 increment dimming value, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176

3.157 increment gamma, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177

3.158 increment input black balance, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178

3.159 increment input white balance, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179

3.160 increment phase, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180

3.161 increment saturation, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181

3.162 increment sharpness, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182

3.163 increment shutter, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183

3.164 increment tint, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184

3.165 input format horizontal total possible, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185

3.166 phase possible, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186

3.167 read auto picture alignment configuration, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187

3.168 read barscale position, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .188

3.169 read customer id, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189

3.170 read date time, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .190

3.171 read DMX address, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191

3.172 read DMX mode, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192

3.173 read DMX universe, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193

3.174 read gateway configuration, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194

3.175 read global software version, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195

3.176 read image load method, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196

3.177 read infrared ports, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197

3.178 read lamp CLO status, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198

3.179 read lamp CLO target lumens, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199

3.180 read lamp runtime, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200

3.181 read language, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201

3.182 read menu position, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202

3.183 read network configuration, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203

3.184 read panel size, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .204

3.185 read projector runtime, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .205

3.186 read projector serial number, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206

3.187 read projector status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .207

3.188 read wifi configuration, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208

3.189 read wifi key Mgmt, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .209

3.190 read wifi scan, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210

3.191 read wifi SSID, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211

3.192 read wifi status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212

3.193 RS interface selection , read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .213

3.194 RS interface selection , write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .214

3.195 saturation possible, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215

3.196 save current adjustments to a file, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216

3.197 save custom settings, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217

3.198 save image settings, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .218

3.199 select main window as prefix, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .219

3.200 select PIP window as prefix, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220

3.201 select source 1 as prefix, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221




3.205 select window, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .225

3.206 set aspect ratio file, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .226

3.207 set aspect ratio height, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .227

3.208 set aspect ratio width, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .228

3.209 set blanking bottom, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .229

3.210 set blanking left, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230

3.211 set blanking right, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .231

3.212 set blanking top , write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .232

3.213 set brightness, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .233

3.214 set clamp delay , write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .234

3.215 set clamp width, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .235


Table of contents

4

3.216 set color balance blue green ratio, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .236

3.217 set color balance red green ratio, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237

3.218 set color temperature, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238

3.219 set contrast, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .239

3.220 set contrast enhancement, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240

3.221 set dimming, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .241

3.222 set gamma, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .242

3.223 set input black balance, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .243

3.224 set input white balance, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .244

3.225 set intensity, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .245

3.226 set lamp status, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .246

3.227 set layout , write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .247

3.228 set lcd backlight level, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .248

3.229 set lcd time out, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .249

3.230 set lens focus, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250

3.231 set lens shift, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .251

3.232 set lens zoom, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .252

3.233 set lock, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .253

3.234 set no signal color logo, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .254

3.235 set no signal shutdown delay, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .255

3.236 set no signal shutdown status, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .256

3.237 set output window in native resolution, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .257

3.238 set output window parameters, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .258

3.239 set output window status, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .259

3.240 set P7 TCGD blue X, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260

3.241 set P7 TCGD blue Y, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .261

3.242 set P7 TCGD cyan X, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .262

3.243 set P7 TCGD cyan Y, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .263

3.244 set P7 TCGD green X, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .264

3.245 set P7 TCGD green Y, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .265

3.246 set P7 TCGD magenta X, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .266

3.247 set P7 TCGD magenta Y, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267

3.248 set P7 TCGD red X , write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .268

3.249 set P7 TCGD red Y, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .269

3.250 set P7 TCGD selection, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .270

3.251 set P7 TCGD white X, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .271

3.252 set P7 TCGD white Y, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .272

3.253 set P7 TCGD yellow X, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .273

3.254 set P7 TCGD yellow Y, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .274

3.255 set phase, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .275

3.256 set same lens settings status, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .276

3.257 set saturation, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .277

3.258 set scan/orientation configuration, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .278

3.259 set sharpness, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .279

3.260 set shutter position, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .280

3.261 set soft edge black level, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .281

3.262 set soft edge size black level bottom, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .282

3.263 set soft edge size black level left, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .283

3.264 set soft edge size black level right, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .284

3.265 set soft edge size black level top, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .285

3.266 set soft edge size bottom, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .286

3.267 set soft edge size left, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .287

3.268 set soft edge size right , write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .288

3.269 set soft edge size top , write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .289

3.270 set soft edge status, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .290

3.271 set source , write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .291

3.272 set source extended, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .292

3.273 set test pattern by name, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .294

3.274 set test pattern convergence, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .295

3.275 set test pattern convergence green blue, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .296

3.276 set test pattern convergence red blue, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .297

3.277 set test pattern convergence red green blue, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .298

3.278 set tint, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .299

3.279 set warp axis position, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .300

3.280 set warp file, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .301

3.281 set warp grid size, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .302

3.282 set warp hierarchic keystone in X direction, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .303

3.283 set warp hierarchic keystone in Y direction, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .304

3.284 set warp hierarchic linearity in X direction, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .305

3.285 set warp hierarchic linearity in Y direction, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .306

3.286 set warp hierarchic point shift, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .307

3.287 set warp keystone horizontal. Deprecated from version 1.6, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .308

3.288 set warp keystone vertical. Deprecated from version 1.6, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .309

3.289 set warp line shift horizontal. Deprecated from version 1.6, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .310

3.290 set warp line shift vertical. Deprecated from version 1.6, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311

3.291 set warp linearity horizontal. Deprecated from version 1.6, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .312


Table of contents

3.292 set warp linearity vertical. Deprecated from version 1.6, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .313

3.293 set warp pin barrel horizontal. Deprecated from version 1.6, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .314

3.294 set warp pin barrel vertical. Deprecated from version 1.6, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .315

3.295 set warp point shift. Deprecated from version 1.6, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .316

3.296 set warp rotation, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .317

3.297 set warp scale horizontal, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .318

3.298 set warp scale vertical , write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .319

3.299 set warp shift horizontal, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .320

3.300 set warp shift vertical, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .321

3.301 set warp status, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .322

3.302 set warp X1. Deprecated from version 1.6, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .323




3.306 set warp Y1. Deprecated from version 1.6, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .327




3.310 sharpness possible, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .331

3.311 text off, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .332

3.312 text on, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .333

3.313 tint possible, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .334

3.314 unfreeze, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .335

3.315 warp file delete, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .336

3.316 warp file rename, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .337

3.317 write auto picture alignment configuration, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .338

3.318 write barscale position, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .339

3.319 write customer id, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .340

3.320 write DMX address, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .341

3.321 write DMX mode, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .342

3.322 write DMX universe, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .343

3.323 write gateway configuration, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .344

3.324 write infrared ports status, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .345

3.325 write lamp CLO status, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .346

3.326 write lamp CLO target lumens, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .347

3.327 write language, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .348

3.328 write menu position, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .349

3.329 write network configuration, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .350

3.330 write projector off, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .351

3.331 write projector on, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .352

3.332 write wifi configuration, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .353

3.333 write wifi key mgmt, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .354

3.334 write wifi scan, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .355

3.335 write wifi SSID , write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .356

3.336 write wifi status, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .357

Index.................................................................................................................... 359


Table of contents

6 R5905447 COMMAND CATALOG 08/06/2015

1. INTRODUCTION

1. Introduction


1. Introduction

1.1

About this document

What is the purpose of this document?

This document is applicable for the Barco device mentioned on the front page of this document and can thus not be used on any other equipment.

It explains how the communication with the device is accomplished. In order to be able to communicate with this Barco device, the

Barco Projection Protocol, which is explained in detail in the following chapter, must be strictly followed.

Audience & prerequisites

This document is intended for software programmers and system integrators who want to be able to control a Barco device from their own application. This document expects a basic knowledge of binary math, networking technology and programming.


2. The Barco Projection Protocol

2. THE BARCO PROJECTION PROTOCOL

•

•

•

•

Overview

The Barco Projection Protocol explained

Ethernet communication

RS232/RS422/USB-B communication

The command representation in this manual



2.1

The Barco Projection Protocol explained

•

•

•

•

Usage

The Barco Projection Protocol is used for the serial communication with a Barco device. This can be done by the following ways:

Ethernet

RS232

RS422

USB-B

Structure

Each command is built up from a start byte, device address, request/response, checksum and stop byte (image 2-1).

Start byte Device address

Request /

Response

Checksum Stop byte

1 byte (0xFE) 1 byte

1..n bytes

1 byte 1 byte (0xFF)

•

•

•

•

•

Image 2-1

Command structure

Start byte: used to let the receiver know that a command will follow.

Device address: when multiple devices (maximum 256) are connected on the same physical connection, the device address is used to specify the device (only for RS232 connections). In case of an Ethernet connection, this should be set to 0.

Request/Response: the actual command bytes.

Checksum: used to detect if any errors occurred during transmission or reception of the command.

Stop byte: used to let the receiver know that the end of a command has been reached.

How is the checksum calculated?

The checksum calculation is based on modular arithmetic:

Checksum

= (Device address + Request/Response) modulo 0x100 (or 256)

Bytes conversion

Some bytes cannot be used in a command. If they do appear in the request/response or checksum, they must be converted. The table below gives an overview.

Byte

0x80

0xFE

0xFF

After conversion

0x80 0x00

0x80 0x7E

0x80 0x7F

When a byte sequence from the after conversion column is received, that sequence must be converted to the corresponding byte.

10

•

•

Characters and character strings

Each character is sent as a byte, using the ANSI encoding method.

Character strings can be formatted in two ways:

C-style format

An array of one or more characters which is terminated by a NULL character (0x00). The position of the NULL character determines the length of the string.

Example: ’f’ ’o’ ’o’ ’ ’ ’b’ ’a’ ’r’ 0x00

Pascal-style format

An array of one or more characters which is started (the first byte) with the length of the string. Therefore, Pascal-style strings are limited to 255 characters.

Example: 0x07 ’f’ ’o’ ’o’ ’ ’ ’b’ ’a’ ’r’

ANSI

American National Standards Institute



Data words

A data word is a value which consists of multiple bytes. Data words are formatted in big endian.

How to calculate the value of a data word?

Example of a 4-byte value: 0x01 0x20 0x50 0x30

= (0x01 * 256^3) + (0x20 * 256^2) + (0x50 * 256^1) + (0x30 * 256^0)

= (1 * 16777216) + (32 * 65536) + (80 * 256) + (48 * 1)

= 16777216 + 2097152 + 20480 + 48

= 18894896 msb

The most significant byte, is the byte with the greatest weight (value).

lsb

The less significant byte, is the byte with the smallest weight (value).

Big endian

When the first byte of a data word is the msb and the last byte is the lsb, the data word is in big endian.

Negative values

The two’s complement (2-complement) system is used for the representation of negative values.

Acknowledgement (ACK and NACK)

If a command is received, the receiver will check the validity and correctness of the command before processing it. If the command is understood, the receiver will first acknowledge the command before doing the actual processing of the command. An ACK (AC-

Knowledge) is sent when these conditions are met:

•

•

•

The command format is correct

The command and its parameters are valid

The checksum is correct

When these conditions are not met, a NACK (Not ACKnowledge) is sent.

Byte 1

Byte 2

ACK

0x00

0x06

NACK

0x00

0x15

When the sender receives a NACK message, it is up the sender to decide what should happen next: retry sending the command or discard the command.

Acknowledgements are not used in multicast communication.

Sending and receiving a command

A command which is sent to the device will consist of a request. A command which is received by the client will consist of a response.

Requests must be sent in the Barco Projection Protocol format: each request needs to be structured in the correct way before it is sent to the device. Responses are also sent in the Barco Projection Protocol format.

Keep in mind that:

•

•

For Ethernet communication, the Device address must be set to 0.

A correct Checksum must be generated for the command.

After a request has been sent to the device, the acknowledgement of the request must be read first. After the request has been acknowledged, the response from the device (if applicable) can be expected.

Example 1: The client wants to know the type of the device. It sends the following command: projector type, read. The device will acknowledge (ACK) the request and then send the response which contains the device type.



(1) projector type, read - request

Client (2) ACK

(3) projector type, read - response

Device

Image 2-2

Example 1

Example 2: The client sends an unknown command. The device doesn’t recognize the command and sends a NACK.

Client

(1) unknown command

(2) NACK

Device

Image 2-3

Example 2

How to handle failing communication?

When a sender fails to send a command, or a receiver fails to return the expected response (ACK, NACK or response), some steps must be followed to handle this failing communication.

There are 2 possible failures:

•

•

Communication link problems: if the sending of the commands itself doesn’t work, it will be because the communication is broken (e.g. the receiver is disconnected from the network).

Answer back problems: when commands can be sent out but no response is sent back, it means that the communication link is OK but the receiver is unable to answer back.

Each type of failure needs another way of handling.

Handling communication link problems

As communication link problems will most likely have a physical reason (cable disconnected, hub down, device down, …), the user must be notified and must be asked for his feedback. In most cases there will be a user intervention needed to correct this problem

(connect the cable, reboot the hub, restart the device, …).

The actual implementation of this should be described in the specifications of the application.

Handling answer back problems

Answer back problems should be addressed in another way. When a receiver fails to answer back it might be that it is currently too busy to answer back. The application software should implement some simple mechanisms to avoid problems when this occurs:

1.

Timeout waiting: the application should wait for a limited amount of time for an answer (e.g. max 10 seconds). This ensures that the application can react when a command doesn’t get answered in time.

2.

Retry waiting: if the timeout expires, one can retry waiting for the answer. By doing this, the user has the opportunity to cancel the action. If needed, the retry can even be repeated several times.

3.

Retry sending: when a command does not get answered after the timout waiting and retry waiting, the command is considered to be lost in action and the application should send the command again.

This mechanism follows the sequence of the steps: first the timeout waiting is used, then the retry waiting and finally the retry sending. If all of these steps fail, there might be a major problem with the receiver. In this case the user should be notified of these problems so that he can check the status of the receiver.



2.2

Ethernet communication

Introduction

The communication follows a client/server model where the device is the server. This means that the device responds on requests that are sent by a client. The device will not send out messages on its own initiative.

The communication is blocking which means that when a request is sent to the device, no other requests can be sent until the device has responded on the first request. The communication blocks for each request.

The connector used for the Ethernet ports are of rugged Neutrik EtherCon RJ45 type, which is compatible with standard RJ45 cable connector. Straight (most common) as well as cross linked network cables can be used.

7

8

5

6

3

4

1

2

Pin

10/100 Base-T — RJ45 port

Description

TXD+

TXD-

RXD+

—

—

RXD-

—

—

Making connection with the device

The device is listening on TCP port 0xAAA0 (43680) for incoming connections. The IP address can be retrieved using the local user interface or on the OSD menu of the device.

Device discovery

It is possible to discover all the devices on the network using a UDP broadcast. A UDP broadcast only works on IP networks and requires a special socket connection: the datagram connection.

Device 1

Device 2

Client LAN

Device n

Image 2-4

To discover the devices, send a datagram packet to the broadcast address 255.255.255.255 on port 0xA001.

The packet should contain 1 byte: 0x3F, which represents the character ‘?’.

All the devices that support UDP broadcast discovery, will answer on the request by sending an array of (C-language) strings on the same socket. Each string represents a key-value pair with specific information about the device that has been discovered.



•

•

Typically, the following strings will be returned:

• hostname=value; the hostname of the device

•

ip-address=value; the IP address of the device

mac-address=value; the MAC address of the NIC on the device

type=value; the device type (not for DP90/DP100 projectors)

Remarks:

• The broadcast does not follow the typical Barco Projection Protocol formatting: the request is just one byte (not marked up as Barco Projection Protocol command) and the devices answer back without sending an ACK and without formatting their response in the Barco Projection Protocol format.

•

•

The size of the array is undetermined, but in most cases it will contain 4 strings. However, this is open to future expansion, so more strings can be added later.

The strings normally appear in this order: hostname, ip-address, mac-address and type, but this cannot be guaranteed.

The used broadcast is a limited broadcast. This means that the broadcast message is transmitted to all NIC’s which are on the same IP segment as the client. This type of broadcast is not forwarded by routers so it will not detect devices which are on another segment.

NIC

Network Interface Card



2.3

RS232/RS422/USB-B communication

RS232

An Electronic Industries Association (EIA) serial digital interface standard specifying the characteristics of the communication path between two devices using either D-SUB 9 pins or D-SUB 25 pins connectors. This standard is used for relatively short-range communications and does not specify balanced control lines. RS-232 is a serial control standard with a set number of conductors, data rate, word length and type of connector to be used. The standard specifies component connection standards with regard to computer interface. It is also called RS-232-C, which is the third version of the RS-232 standard, and is functionally identical to the CCITT V.24 standard. Logical ’0’ is > + 3V, Logical ’1’ is < -

3V. The range between -3V and +3V is the transition zone.

RS422

An EIA serial digital interface standard that specifies the electrical characteristics of balanced (differential) voltage, digital interface circuits. This standard is usable over longer distances than RS-232. This signal governs the asynchronous transmission of computer data at speeds of up to 920,000 bits per second. It is also used as the serial port standard for Macintosh computers. When the difference between the 2 lines is < - 0.2V that equals with a logical ’0’.

When the difference is > +0.2V that equals to a logical ’1’..

Settings

Baud rate: Defines the speed of the data transfer. The baud rate can be set using the local user interface on the device. Consult the user manual of the device for more detailed information.

Data bits: Eight (8) data bits are used for each character of the data transfer.

Parity: There is no parity bit used to perform error checking.

Stop bit: One (1) stop bit is used to define the end of a character.

7

8

9

3

4

Pin

1

2

Hardware

5

6

Description

DCD : Data Carrier Detect

RXD- : Receive Data

TXD- : Transmitted Data

DTR : Data Terminal Ready [RS232]

TXD+ : Transmitted Data [RS422]

GND : Ground

DSR : Data Set Ready [RS232]

RXD+ : Received Data [RS422]

— (not connected) —

CTS : Clear To Send

RI : Ring Indicator

RS232/422 input (Sub-D) port



2.4

The command representation in this manual

About the command representation in this manual

•

•

•

Title: The title of a command is built up from its function (e.g. network settings), followed by its type (e.g. read).

Description: A general description of the command is given in the About this command section.

Request/Response table: Each row in the request/response table represents a datafield. A datafield contains 1 or more values.

a) Pos: The position of the datafield. When the size of the datafield is greater than 1, the datafield will take more than 1 position.

b) Size: The number of values the datafield must contain. This can be different from the total number of available values, dependent on the value groups.

c) Name: The name of the datafield.

d) Description: The description of the datafield.

e) Content: The value(s) of the datafield. This column consists of the value itself, and a value description. Every value is displayed in a separate row. A datafield can have different value groups.

Different value groups can be distinguished as follows:

If consecutive rows have different background colors, the values belong to another group.

If they have the same background color, the values belong to the same group.

Only 1 value group per datafield may be choosen to be used in the command. All the values of a value group must appear together and in the same order.

Example: the datafield below contains 2 IP addresses. Only 1 of the 2 IP-addresses may be choosen in the command. The values of the IP-addresses must stay in the same order.

Pos

0-3

Size

4

Name

IP-address

Description

This is the IP-address datafield.

1

2

192

168

1

1

192

168

Content

IP-address 1, value 1 (dec)








Table 2-5

Example


3. COMMANDS

3. Commands


3. Commands


3. Commands

3.1

3D dark time adjustment, read

About this command

This command reads the 3D dark time adjustment.

Request

Pos

0

1

Size

1

1

Name

3D

Read 3D dark time adjustment

Response

Pos

0

Size

1

1 1

2-3 2

Name

3D

Read 3D dark time adjustment dark time set

Description

Description dark time set in uS as WORD

4-5 2 actual dark time actual dark time in uS as WORD

0x3d

0x02

Content

Content

0x3d

0x02

MSB (hex)

LSB (hex)

MSB (hex)

LSB (hex)


3. Commands

3.2

3D dark time adjustment, write


This command writes the 3D dark time adjustment.

Request

Pos

0

1

Size

1

1

2-3 2

Name

3D

Write 3D dark time adjustment dark time adjustment

Description dark time in uS as WORD

Content

0x3d

0x82

MSB (hex)

LSB (hex)


3. Commands

3.3

3D Double/Tripple Flash limit, read


This command reads the 3D Double/Tripple Flash limit.

Request

Pos

0

1

Size

1

1

Name

3D

Read 3D Flash Limit

Description

Response

Pos Size

0

1

2

1

1

1

Name

3D

Read 3D Flash Limit

Double Flash

3 1 Tripple Flash

Description

Maximum input value to be double flashed.


0x3d

0x09

Content

Content

0x3d

0x09

0x00

0x01

0x02

0x00

0x01

0x02

50Hz (hex)

48Hz (hex)

30Hz (hex)

30Hz (hex)

25Hz (hex)

24Hz (hex)


3. Commands

3.4

3D Double/Tripple Flash limit, write


This command writes the 3D Double/Tripple Flash limit.

Request

Pos

0

1

2

Size

1

1

1

3

Name

3D

Write 3D Flash Limit

Double Flash

1 Tripple Flash


Description


Content

0x3d

0x89

0x00

0x01

0x02

0x00

0x01

0x02

50Hz (hex)

48Hz (hex)

30Hz (hex)

30Hz (hex)

25Hz (hex)

24Hz (hex)


3. Commands

3.5

3D field dominance, read


This command reads the 3D field dominance for the current input. Only used with frame sequential 3D.

Request

Pos

0

1

Size

1

1

Name

3D

Read 3D field dominance

Description

0x3d

0x05

Content

Response

Pos Size

0

1

1

1

2 1

Name

3D

Read 3D field dominance

3D field dominance

Description

0x3d

0x05

0x00

0x01

Content

Left - Right (hex)

Right - Left (hex)


3. Commands

3.6

3D field dominance, write


This command writes the 3D field dominance for the current input. Only used with frame sequential 3D.

Request

Pos

0

1

2

Size

1

1

1

Name

3D

Write 3D field dominance

3D field dominance

Description

0x3d

0x85

0x00

0x01

Content

Left - Right (hex)

Right - Left (hex)


3. Commands

3.7

3D L/R Output Reference Delay, read


This command reads the 3D L/R output reference delay.

Request

Pos

0

1

Size

1

1

Name

3D

Read 3D L/R Output

Reference Delay

Description

Response

Pos

0

Size

1

1 1

2-3 2

Name

3D

Read 3D L/R Output

Reference Delay

L/R output reference delay

Description

2-complement number, with units to be uS.

About datafield 4 (L/R output reference delay)

Time data shall be represented as a 2-complement number, with units to be microseconds.

Ex. 0x0190 = 400us (positive delay); 0xFE70 = - 400us (negative delay)

0x3d

0x03

0x3d

0x03

Content

Content

MSB (hex)

LSB (hex)


3. Commands

3.8

3D L/R Output Reference Delay, write


This command writes the 3D L/R output reference delay.

Request

Pos

0

1

Size

1

1

2-3 2

Name

3D

Write 3D L/R Output

Reference Delay

L/R output reference delay

Description

2-complement number, with units to be uS.

About datafield 2 (L/R output reference delay)

Time data shall be represented as a 2-complement number, with units to be microseconds.

Ex. 0x0190 = 400us (positive delay); 0xFE70 = - 400us (negative delay)

0x3d

0x83

Content

MSB (hex)

LSB (hex)


3. Commands

3.9

3D mode, read


This command reads the 3D mode for the current input.

Request

Pos

0

1

Size

1

1

Name

3D

Read 3D mode

Response

Pos Size

0

1

1

1

2 1

Name

3D

Read 3D mode

3D mode

Description

Description

Content

0x3d

0x01

Content

0x3d

0x01

0x00

0x01

0x02

0x03

0x04

0x06

0x07

Frame Sequential - Single

Channel (hex)

Frame Sequential - Dual

Channel (hex)

Frame Packing (FHD3D)

(hex)

Side-by-Side (Half) (hex)

Top-and-Bottom (Half) (hex)

SENSIO(R) HI_FI 3D (hex)

Line Altering (3G) (hex)


3. Commands

3.10 3D mode, write


This command writes the 3D mode for the current input.

Request

Pos

0

1

2

Size

1

1

1

Name

3D

Write 3D mode

3D mode

Description Content

0x3d

0x81

0x00

0x01

0x02

0x03

0x04

0x06

0x07

Frame Sequential - Single

Channel (hex)

Frame Sequential - Dual

Channel (hex)

Frame Packing (FHD3D)

(hex)

Side-by-Side (Half) (hex)

Top-and-Bottom (Half) (hex)

SENSIO(R) HI_FI 3D (hex)

Line Altering (3G) (hex)


3. Commands

3.11 3D status, read


This command reads the 3D status for the current input.

Request

Pos

0

1

Size

1

1

Name

3D

Read 3D status

Response

Pos Size

0

1

1

1

2 1

Name

3D

Read 3D status

3D status

Description

Description

Content

0x3d

0x00

Content

0x3d

0x00

0x00

0x01

Off (hex)

On (hex)


3. Commands

3.12 3D status, write


This command writes the 3D status for the current input.

Request

Pos

0

1

2

Size

1

1

1

Name

3D

Write 3D status

3D status


0x3d

0x80

0x00

0x01

Off (hex)

On (hex)


3. Commands

3.13 3D Sync Loop status, read


This command reads the 3D Sync Loop status for the current input.

Request

Pos

0

1

Size

1

1

Name

3D

Read 3D Sync Loop status

Description

Response

Pos

0

Size

1

1 1

2 1

Name

3D

Read 3D Sync Loop status

3D Sync Loop status

Description

Content

0x3d

0x07

Content

0x3d

0x07

0x00

0x01

Off (hex)

On (hex)


3. Commands

3.14 3D Sync Loop status, write


This command writes the 3D Sync Loop status for the current input.

Request

Pos

0

1

Size

1

1

2 1

Name

3D

Write 3D Sync Loop status

3D Sync Loop status


0x3d

0x87

0x00

0x01

Off (hex)

On (hex)


3. Commands

3.15 brightness possible, read


This command checks if brightness adjustment is possible.

Request

Pos

0

1

Size

1

1

Name adj possible adj brightness

Description value known as "adj possible" value known as "adj brightness"

Response

Pos Size

0

1

2

1

1

1

Name adj possible adj brightness possible

Description value known as "adj possible" value known as "adj brightness" adjustment is possible or not

0x29

0x02

Content adj possible (hex) brightness (hex)

0x29

0x02

0x00

0x01

Content adj possible (hex) brightness (hex) not possible (hex) possible (hex)


3. Commands

3.16 clear test pattern, write


This command clears the test pattern.

Request

Pos

0

1

2

Size

1

1

1

Name test pattern test pattern write clear clear

Description byte value known as test pattern 0x41 byte value known as "test pattern write" 0xc4

0x00

Content test pattern (hex) test pattern write (hex) clear (hex)


3. Commands

3.17 contrast possible, read


This command checks if contrast adjustment is possible.

Request

Pos

0

1

Size

1

1

Name adj possible adj contrast

Description value known as "adj possible" value known as "adj contrast"

Response

Pos Size

0

1

2

1

1

1

Name adj possible adj contrast possible

Description value known as "adj possible" value known as "adj contrast" adjustment is possible or not

0x29

0x01

Content adj possible (hex) contrast (hex)

0x29

0x01

0x00

0x01

Content adj possible (hex) contrast (hex) not possible (hex) possible (hex)


3. Commands

3.18 decrement blanking bottom, write


This command decrements the blanking bottom by one.

Request

Pos

0

1

Size

1

1

Name dec adj adj blanking bottom

Description byte value known as "dec adj" byte value known as

"adj blanking bottom"

0x23

0x4d

Content dec adj (hex) adj blanking bottom (hex)


3. Commands

3.19 decrement blanking left, write


This command decrements the blanking left by one.

Request

Pos

0

1

Size

1

1

Name dec adj adj blanking left


"adj blanking left"

0x23

0x4e

Content dec adj (hex) adj blanking left (hex)


3. Commands

3.20 decrement blanking right, write


This command decrements the blanking right by one.

Request

Pos

0

1

Size

1

1

Name dec adj adj blanking right


"adj blanking right"

0x23

0x4f

Content dec adj (hex) adj blanking right (hex)


3. Commands

3.21 decrement blanking top, write


This command decrements the blanking top by one.

Request

Pos

0

1

Size

1

1

Name dec adj adj blanking top


"adj blanking top"

0x23

0x4c

Content dec adj (hex) adj blanking top (hex)


3. Commands

3.22 decrement brightness, write


This command decrements the brightness by one.

Request

Pos

0

Size

1

Name decrement brightness

Description decrement brightness 0x04

Content dec brightness (hex)


3. Commands

3.23 decrement color balance blue green ratio, write


This command decrements the color balance blue green ratio by one.

range 0 -> 200.

Request

Pos

0

1

Size

1

1

Name dec adj adj color balance blue green


"adj color balance blue green"

0x23

0x44

Content dec adj (hex) adj color balance blue green

(hex)


3. Commands

3.24 decrement color balance red green ratio, write


This command decrements the color balance red green ratio by one.

range 0 -> 200.

Request

Pos

0

1

Size

1

1

Name dec adj adj color balance red green


"adj color balance red green"

0x23

0x43

Content dec adj (hex) adj color balance red green

(hex)


3. Commands

3.25 decrement contrast, write


This command decrements the contrast by one.

Request

Pos

0

Size

1

Name decrement contrast

Description decrement contrast 0x02

Content decrement contrast (hex)


3. Commands

3.26 decrement dimming value, write


This command decrements the dimming value by one.

The higher the value the brighter the light output.

Request

Pos

0

1

Size

1

1

Name dec adj adj dimming

Description byte value known as "dec adj" byte value known as " adj dimming"

0x23

0x0d

Content dec adj (hex) adj dimming (hex)


3. Commands

3.27 decrement gamma, write


This command decrements the gamma by one.

Request

Pos

0

1

Size

1

1

Name dec adj adj gamma


"adj input gamma"

0x23

0x70

Content dec adj (hex) adj gamma (hex)


3. Commands

3.28 decrement input black balance , write


This command decrements the input black balance by one.

Request

Pos

0

1

Size

1

1

Name dec adj adj input black balance


"adj input black balance"

0x23

0x6e

Content dec adj (hex) adj input black balance (hex)


3. Commands

3.29 decrement input white balance , write


This command decrements the input white balance by one.

Request

Pos

0

1

Size

1

1

Name dec adj adj input white balance


"adj input white balance"

0x23

0x6f

Content dec adj (hex) adj input white balance (hex)


3. Commands

3.30 decrement phase, write


This command decrements the phase by one.

Request

Pos

0

Size

1

Name decrement phase

Description decrement phase 0x0C

Content dec phase (hex)


3. Commands

3.31 decrement saturation, write


This command decrements the saturation by one.

Request

Pos

0

Size

1

Name decrement saturation

Description decrement saturation 0x06

Content dec saturation (hex)


3. Commands

3.32 decrement sharpness, write


This command decrements the sharpness by one.

Request

Pos

0

Size

1

Name decrement sharpness

Description decrement sharpness 0x0A

Content dec sharpness (hex)


3. Commands

3.33 decrement shutter, write


This command closes the shutter.

Request

Pos

0

1

2

Size

1

1

1

Name dec adj adj shutter value

Description byte value known as "dec adj" byte value known as " adj shutter" value should be 0x00 in order to be valid.

0x23

0x42

0x00

Content dec adj (hex) adj shutter (hex) value (hex)


3. Commands

3.34 decrement tint, write


This command decrements the tint by one.

Request

Pos

0

Size

1

Name decrement tint decrement tint

Description

0x08

Content dec tint (hex)


3. Commands

3.35 freeze, write


This command freezes the active window.

Request

Pos

0

1

Size

1

1 max adj adj freeze

Name Description byte value known as "max adj" byte value known as

"adj freeze"

0x27

0x23

Content max adj (hex) adj freeze (hex)


3. Commands

3.36 function read electronic convergence, read


This command reads the electronic convergence.

Request

Pos

0

1-4

Size

1

4

Name function read electronic convergence

Description byte value known as "function"

DWORD value known as

"read electronic convergence"

Response

Pos

0

Size

1

1-4 4

Name function read electronic convergence

5 1 horizontal



"read electronic convergence" horizontal convergence

6 1 vertical vertical convergence

0x82

0x00

0x00

0x00

0x4b

Content function (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)

0x82

0x00

0x00


BYTE 0 (hex)

BYTE 1 (hex)

0x00

0x4b

BYTE 2 (hex)

BYTE 3 (hex) bit 7 reserved (bit) bit 6 reserved (bit) bit 5 shift blue (MSBit) (bit) bit 4 shift blue (LSBit) (bit) bit 3 shift green (MSBit) (bit) bit 2 shift green (LSBit) (bit) bit 1 shift red (MSBit) (bit) bit 0 shift red (LSBit) (bit) bit 7 reserved (bit) bit 6 reserved (bit) bit 5 shift blue (MSBit) (bit) bit 4 shift blue (LSBit) (bit) bit 3 shift green (MSBit) (bit) bit 2 shift green (LSBit) (bit) bit 1 shift red (MSBit) (bit) bit 0 shift red (LSBit) (bit)

About datafield 4 (horizontal) all shift values have a 2 bit size

MSBit Most Significant Bit

LSBit Least Significant Bit

About datafield 5 (vertical) all shift values have a 2 bit size




3. Commands

3.37 function read input balance pattern status, read


This command reads the status of the special pattern used for input balance adjustment.

Request

Pos

0

1-4

Size

1

4

Name function read input balance pattern status



"read input balance pattern status"

0x82

0x00

0x00

0x00

0x51

Response

Pos

0

Size

1

1-4 4

Name function read input balance pattern status



"read input balance pattern status"

5 1 status input balance test pattern status

0x82

0x00

0x00

0x00

0x51

0x00

0x01


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex) off (hex) on (hex)


3. Commands

3.38 function write electronic convergence , write


This command sets the electronic convergence.

Request

Pos

0

1-4

Size

1

4

Name function write electronic convergence



"write electronic convergence"

5 1 horizontal horizontal convergence

6 1 vertical vertical convergence

0x82

0x00


BYTE 0 (hex)

0x00

0x00

BYTE 1 (hex)

BYTE 2 (hex)

0x4c BYTE 3 (hex) bit 7 reserved (bit) bit 6 reserved (bit) bit 5 shift blue (MSBit) (bit) bit 4 shift blue (LSBit) (bit) bit 3 shift green (MSBit) (bit) bit 2 shift green (LSBit) (bit) bit 1 shift red (MSBit) (bit) bit 0 shift red (LSBit) (bit) bit 7 reserved (bit) bit 6 reserved (bit) bit 5 shift blue (MSBit) (bit) bit 4 shift blue (LSBit) (bit) bit 3 shift green (MSBit) (bit) bit 2 shift green (LSBit) (bit) bit 1 shift red (MSBit) (bit) bit 0 shift red (LSBit) (bit)

About datafield 2 (horizontal) all shift values have a 2 bit size



About datafield 3 (vertical) all shift values have a 2 bit size




3. Commands

3.39 get aspect ratio file, read


This command gets the aspect ratio file value.

Request

Pos

0

1

Size

1

1

Name get adj adj aspect ratio

2 1 aspect ratio file

Description byte value known as "get adj" byte value known as

"adj aspect ratio" byte value known as

"aspect ratio file"

Response

Pos Size

0

1

1

1


2

NA

1 aspect ratio file

NA aspect ratio string



"aspect ratio file" aspect ratio as C-language string

0x21

0x0b

0xc0

0x21

0x0b

0xc0

About datafield 6 (aspect ratio string)

"4:3" or "16:9" or "5:4" or "2.35" or "1.88" or "1.85" or "1.78" or "16:10" or "1.67" or "Custom"

Content get adj (hex) adj aspect ratio (hex) aspect ratio file (hex)

Content get adj (hex) adj aspect ratio (hex) aspect ratio file (hex) aspect ratio string (string)


3. Commands

3.40 get aspect ratio height, read


This command gets the aspect ratio height value.

Request

Pos

0

1

Size

1

1


2 1 aspect ratio height



"aspect ratio height"

Response

Pos Size

0

1

1

1


2

3-6

1

4 aspect ratio height aspect ratio height



"aspect ratio height" aspect ratio height as DWORD

0x21

0x0b

Content get adj (hex) adj aspect ratio (hex)

0xc2 aspect ratio height (hex)

0x21

0x0b



MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)


3. Commands

3.41 get aspect ratio width, read


This command gets the aspect ratio width value.

Request

Pos

0

1

Size

1

1


2 1 aspect ratio width



"aspect ratio width"

Response

Pos Size

0

1

1

1


2

3-6

1

4 aspect ratio width aspect ratio width



"aspect ratio width" aspect ratio width as DWORD

0x21

0x0b


0xc1 aspect ratio width (hex)

0x21

0x0b



MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)


3. Commands

3.42 get baudrate, read


This command gets the baudrate.

Request

Pos

0

Size

1 baudrate

Name

Response

Pos

0

NA

Size

1 baudrate

NA baudrate

Name

Description byte value known as "baudrate"

Description byte value known as "baudrate" baudrate as C-string

0x75

Content baudrate (hex)

0x75

Content baudrate (hex) baudrate (string)


3. Commands

3.43 get blanking bottom, read


This command gets the blanking bottom value.

Request

Pos

0

1

Size

1

1

Name get adj adj blanking bottom



Response

Pos Size

0

1

1

1

Name get adj adj blanking bottom

2-3 2 value

0x21

0x4d


"adj blanking bottom" blanking value expressed as WORD range depending on the native resolution of the projector.

0x21

0x4d

Content get adj (hex) adj blanking bottom (hex)

Content get adj (hex) adj blanking bottom (hex)

MSB (hex)

LSB (hex)


3. Commands

3.44 get blanking left, read


This command gets the blanking left value.

Request

Pos

0

1

Size

1

1

Name get adj adj blanking left

Response

Pos Size

0

1

2-3

1

1

2

Name get adj adj blanking left value

Description byte value known as "get adj" byte value known as "adj blanking left"

0x21

0x4e

Description byte value known as "get adj" byte value known as "adj blanking left" blanking value expressed as WORD range depending on the native resolution of the projector.

0x21

0x4e

Content get adj (hex) adj blanking left (hex)

Content get adj (hex) adj blanking left (hex)

MSB (hex)

LSB (hex)


3. Commands

3.45 get blanking right, read


This command gets the blanking right value.

Request

Pos

0

1

Size

1

1

Name get adj adj blanking right

Description byte value known as "get adj" 0x21 byte value known as "adj blanking right" 0x4f

Response

Pos Size

0

1

2-3

1

1

2

Name get adj adj blanking right value

Description byte value known as "get adj" 0x21 byte value known as "adj blanking right" 0x4f blanking value expressed as WORD range depending on the native resolution of the projector.

Content get adj (hex) adj blanking right (hex)

Content get adj (hex) adj blanking right (hex)

MSB (hex)

LSB (hex)


3. Commands

3.46 get blanking top, read


This command gets the blanking top value.

Request

Pos

0

1

Size

1

1

Name get adj adj blanking top

Response

Pos Size

0

1

2-3

1

1

2

Name get adj adj blanking top value

Description byte value known as "get adj" 0x21 byte value known as "adj blanking top" 0x4c

Description byte value known as "get adj" 0x21 byte value known as "adj blanking top" 0x4c blanking value expressed as WORD range depending on the native resolution of the projector.

Content get adj (hex) adj blanking top (hex)

Content get adj (hex) adj blanking top (hex)

MSB (hex)

LSB (hex)


3. Commands

3.47 get brightness, read


This command gets the brightness value of the active source.

Request

Pos

0

1

Size

1

1

Name get adj adj brightness

Description byte value known as "get adj" byte value known as "adj brightness"

Response

Pos Size

0

1

2

1

1

1

Name get adj adj brightness value

Description byte value known as "get adj" byte value known as "adj brightness" brightness value range 0->255

0x21

0x02

Content get adj (hex) adj brightness (hex)

0x21

0x02

Content get adj (hex) adj brightness (hex) brightness value (hex)


3. Commands

3.48 get clamp delay, read


This command gets the clamp delay value of the active source.

Request

Pos

0

1

Size

1

1

Name get adj adj clamp delay


"adj clamp delay"

Response

Pos Size

0

1

1

1

Name get adj adj clamp delay

2 1 value


"adj clamp delay" clamp delay value range 0->255

0x21

0x67

Content get adj (hex) adj clamp delay (hex)

0x21

0x67

Content get adj (hex) adj clamp delay (hex) clamp delay value (hex)


3. Commands

3.49 get clamp width, read


This command gets the clamp width value of the active source.

Request

Pos

0

1

Size

1

1

Name get adj adj clamp width


"adj clamp width"

Response

Pos Size

0

1

1

1

Name get adj adj clamp width

2 1 value


"adj clamp width" clamp width value range 0->255

0x21

0x68

Content get adj (hex) adj clamp width (hex)

0x21

0x68

Content get adj (hex) adj clamp width (hex) clamp width value (hex)


3. Commands

3.50 get color balance blue green ratio, read


This command gets the color balance blue green ratio of the active source.

Request

Pos

0

1

Size

1

1

Name get adj adj color balance blue green



Response

Pos Size

0

1

1

1

Name get adj adj color balance blue green

2 1 blue green ratio

0x21

0x44


"adj color balance blue green" color balance blue green ratio multiplied by 100 range 0 -> 200

0x21

0x44

Content get adj (hex) adj color balance blue green

(hex)

Content get adj (hex) adj color balance blue green

(hex) blue green ratio (hex)


3. Commands

3.51 get color balance red green ratio, read


This command gets the color balance red green ratio of the active source.

Request

Pos

0

1

Size

1

1

Name get adj adj color balance red green



Response

Pos Size

0

1

1

1

Name get adj adj color balance red green

2 1 red green ratio

0x21

0x43


"adj color balance red green" color balance red green ratio multiplied by 100 range 0 -> 200

0x21

0x43

Content get adj (hex) adj color balance red green

(hex)

Content get adj (hex) adj color balance red green

(hex) red green ratio (hex)


3. Commands

3.52 get color temperature, read


This command gets the color temperature of the active source.

Request

Pos

0

1

Size

1

1

Name get adj adj color balance


"adj color balance"

Response

Pos

0

1

NA

Size Name

1

1 get adj adj color temperature

NA color temperature

Description byte value known as "get adj" color temperature expressed as C-String

About datafield 4 (color temperature) possible color temperature strings are:

"custom"

"projector-white"

"3200"

"5400"

"6500"

"9300"

0x21

0x45

Content get adj (hex) adj color balance (hex)

0x21

0x45

Content get adj (hex) color temperature (string)


3. Commands

3.53 get common address, read


This command gets the common address.

Request

Pos

0

Size

1

Name common address

Description byte value known as "common address" 0x6c

Response

Pos

0

Size

1

1 1

Name common address address

Description byte value known as "common address" 0x6c address

Content common address (hex)

Content common address (hex) address (hex)


3. Commands

3.54 get contrast, read


This command gets the contrast value of the active source.

Request

Pos

0

1

Size

1

1

Name get adj adj contrast

Description byte value known as "get adj" byte value known as "adj contrast"

Response

Pos Size

0

1

2

1

1

1

Name get adj adj contrast contrast value

Description byte value known as "get adj" byte value known as "adj contrast" range 0->100

0x21

0x01

Content get adj (hex) adj contrast (hex)

0x21

0x01

Content get adj (hex) adj contrast (hex) contrast value (hex)


3. Commands

3.55 get contrast enhancement, read


This command gets the contrast enhancement value.

Request

Pos

0

1

Size

1

1

Name get adj adj contrast enh


"adj contrast enhancement"

Response

Pos Size

0

1

2

1

1

1

Name get adj adj contrast enh value


"adj contrast enhancement" contrast enhancement value

3-6 4 contrast plate position for mid contrast or undetermined; contrast plate position as DWORD range 0x0000..0xffff

0x21

0x86

Content get adj (hex) adj contrast enh (hex)

0x21

0x86

Content get adj (hex) adj contrast enh (hex)

0x00

0x01

0x02 low contrast (hex) high contrast (hex) mid contrast or undetermined (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)


3. Commands

3.56 get dimming, read


This command gets the dimming value.

Request

Pos

0

1

Size

1

1

Name get adj adj dimming

Response

Pos Size

0

1

2

1

1

1

Name get adj adj dimming value

Description byte value known as "get adj" byte value known as "adj dimming"

0x21

0x0d

Content get adj (hex) adj dimming (hex)

Description byte value known as "get adj" byte value known as "adj dimming" dimming value range 255 -> 0 the higher the value the brighter the light output

0x21

0x0d

Content get adj (hex) adj dimming (hex) dimming value (hex)


3. Commands

3.57 get ext contrast, read


This command gets the ext contrast value.

Request

Pos

0

1

Size

1

1

Name get adj ext adj contrast

Response

Pos Size

0

1

2-5

1

1

4

Name get adj ext adj contrast actual value

Description byte value known as "get adj ext" byte value known as "adj contrast"

Description byte value known as "get adj ext" byte value known as "adj contrast" actual value as DWORD

0x2b

0X01

Content get adj ext (hex) adj contrast (hex)

6-9 4 minimum value

10-13 4 maximum value

14-17 4 step value minimum value as DWORD maximum value step value as DWORD

0x2b

0X01

Content get adj ext (hex) adj contrast (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)


3. Commands

3.58 get ext contrast enhancement , read


This command gets the extended contrast enhancement value.

Request

Pos

0

1

Size

1

1

Name get adj ext adj contrast enhancement

Description byte value known as "get adj ext" byte value known as "adj contrast enhancement"

Response

Pos

0

Size

1

1 1

2-5 4

Name get adj ext adj contrast enhancement actual value

Description byte value known as "get adj ext" byte value known as "adj contrast enhancement" actual value as DWORD

0x2b

0x86

Content get adj ext (hex) adj contrast enhancement

(hex)

6-9 4 minimum value


14-17 4 step value minimum value as DWORD maximum value as DWORD step value as DWORD

0x2b

0x86

Content get adj ext (hex) adj contrast enhancement

(hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)


3. Commands

3.59 get ext gamma, read


This command gets the extended gamma value.

Request

Pos

0

1

Size

1

1

Name get adj ext adj gamma

Description byte value known as "get adj ext" byte value known as "adj gamma"

Response

Pos Size

0

1

2-5

1

1

4

Name get adj ext adj gamma actual value

Description byte value known as "get adj ext" byte value known as "adj gamma" actual value as DWORD

0x2b

0x70

Content get adj ext (hex) adj gamma (hex)

6-9 4 minimum value


14-17 4 step value minimum value as DWORD maximum value as DWORD step value as DWORD

0x2b

0x70

Content get adj ext (hex) adj gamma (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)


3. Commands

3.60 get ext phase, read


This command gets the ext phase value.

Request

Pos

0

1

Size

1

1

Name get adj ext adj phase

Response

Pos Size

0

1

2-5

1

1

4

Name get adj ext adj phase actual value

Description byte value known as "get adj ext" byte value known as "adj phase"

Description byte value known as "get adj ext" byte value known as "adj phase" actual value as DWORD

6-9 4 minimum value


14-17 4 step value minimum value as DWORD maximum value step value as DWORD

0x2b

0x06

Content get adj ext (hex) adj phase (hex)

0x2b

0x06

Content get adj ext (hex) adj phase (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)


3. Commands

3.61 get ext sharpness, read


This command gets the ext sharpness value.

Request

Pos

0

1

Size

1

1

Name get adj ext adj sharpness

Description byte value known as "get adj ext" byte value known as "adj sharpness"

Response

Pos Size

0

1

2-5

1

1

4

Name get adj ext adj sharpness actual value

Description byte value known as "get adj ext" byte value known as "adj sharpness" actual value as DWORD

0x2b

0x05

Content get adj ext (hex) adj sharpness (hex)

6-9

10-13

14-17

4 minimum value

4 maximum value

4 step value minimum value as DWORD maximum value step value as DWORD

0x2b

0x05

Content get adj ext (hex) adj sharpness (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)


3. Commands

3.62 get freeze status, read


This command gets the freeze status.

Request

Pos

0

1

Size

1

1 get adj adj freeze

Name

Response

Pos Size

0

1

2

1

1

1 get adj adj freeze stutus

Name

Description byte value known as "get adj" byte value known as "adj freeze"

Description byte value known as "get adj" byte value known as "adj freeze" freeze status

0x21

0x23

Content get adj (hex) adj freeze (hex)

0x21

0x23

0x00

0x01

Content get adj (hex) adj freeze (hex) unfrozen (hex) frozen (hex)


3. Commands

3.63 get gamma, read


This command gets the gamma value.

Request

Pos

0

1

Size

1

1

Name get adj adj gamma

Response

Pos Size

0

1

2

1

1

1

Name get adj adj gamma value

Description byte value known as "get adj"

Description byte value known as "get adj" gamma value range 0->7

0x21

0x70

Content get adj (hex) adj gamma (hex)

0x21

0x70

Content get adj (hex) adj gamma (hex) gamma value (hex)


3. Commands

3.64 get gamma (text value), read


This command gets the gamma value as C-String.

Request

Pos

0

1

2

Size

1

1

1

Name get adj adj gamma extension

Description byte value known as "get adj" extension to ask for C-String

Response

Pos

0

Size

1

1

2

NA

Name get adj

1

1 adj gamma extension

NA value

Description byte value known as "get adj" extension to ask for C-String gamma value as C-String.

0x21

0x70

0x01

Content get adj (hex) adj gamma (hex) extension (hex)

0x21

0x70

0x01

Content get adj (hex) adj gamma (hex) extension (hex) value (string)


3. Commands

3.65 get input black balance, read


This command gets the input black balance value of the active source.

This is applicable for the specified color.

Request

Pos

0

1

2

Size

1

1

1

Name get adj adj input black balance color

Description byte value known as "get adj" color specification

Response

Pos Size

0

1

2

1

1

1

Name get adj adj input black balance color

Description byte value known as "get adj" color specification

3 1 balance balance value as byte range -127 -> 127

0x21

0x6E

0x00

0x01

0x02

Content get adj (hex) adj input black balance (hex) red (hex) green (hex) blue (hex)

0x21

0x6E

0x00

0x01

0x02

Content get adj (hex) adj input black balance (hex) red (hex) green (hex) blue (hex) balance (hex)


3. Commands

3.66 get input white balance, read


This command gets the input white balance value of the active source.


Request

Pos

0

1

2

Size

1

1

1

Name get adj adj input white balance color


"adj input white balance" color specification

Response

Pos

0

Size

1

1 1

Name get adj adj input white balance

2 1 color


"adj input white balance" color specification


0x21

0x6f

Content get adj (hex) adj input white balance (hex)

0x00

0x01

0x02 red (hex) green (hex) blue (hex)

0x21

0x6f

Content get adj (hex) adj input white balance (hex)

0x00

0x01

0x02 red (hex) green (hex) blue (hex) balance (hex)


3. Commands

3.67 get intensity, read


This command gets the intensity value.

Request

Pos

0

1

Size

1

1

Name get adj adj intensity

Response

Pos Size

0

1

2

1

1

1

Name get adj adj intensity value

Description byte value known as "get adj" byte value known as "adj intensity"

0x21

0xa4

Content get adj (hex) adj intensity (hex)

Description byte value known as "get adj" byte value known as "adj intensity" intensity value range 0->255

0x21

0xa4

Content get adj (hex) adj intensity (hex) intensity value (hex)


3. Commands

3.68 get ir hold off configuration, read


This command gets the ir hold off configuration value.

Request

Pos

0

1

Size

1

1

Name get adj adj ir hold off configuration


"adj ir hold off configuration"

Response

Pos Size

0

1

1

1

Name get adj adj ir hold off configuration

2 1 manual


"adj ir hold off configuration" manual status

3-6 4 holdoff holdoff in seconds as DWORD only needed in case of manual

0x21

0x92

Content get adj (hex) adj ir hold off configuration

(hex)

0x21

0x92

0x00

0x01

Content get adj (hex) adj ir hold off configuration

(hex) auto (hex) manual (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)


3. Commands

3.69 get lamp status, read


This command gets the status of the lamp, on or off.

Request

Pos

0

Size

1

1 1

Name read projector status mask for lamp status

Description byte value known as

"read projector status" mask for lamp status

Response

Pos Size

0 1

Name read projector status

1 1 lamp status


"read projector status" lamp status

0x67

Content read projector status (hex)

0x40 mask for lamp status (hex)

0x67

Content read projector status (hex)

0x40

0x00 on (hex) off (hex)


3. Commands

3.70 get lamp status, read


This command gets the status of the lamp, on or off.

Request

Pos

0

1

Size

1

1

Name lamp read lamp status

Description byte value known as "lamp" byte value known as

"read lamp status"

Response

Pos Size

0

1

1

1

Name lamp read lamp status

2 1 lamp status value


"read lamp status" lamp status value

0x76

0x9a

Content lamp (hex) read lamp status (hex)

0x76

0x9a

Content lamp (hex) read lamp status (hex)

0x00

0x01 off (hex) on (hex)


3. Commands

3.71 get layout, read


This command gets the active layout file name.

Request

Pos

0

1

Size

1

1 get adj adj layout

Name Description byte value known as "get adj" byte value known as "adj layout"

Response

Pos

0

1

NA

Size Name

1

1 get adj adj layout

NA layout file name

Description byte value known as "get adj" byte value known as "adj layout" layout file name as C-string

0x21

0x90

Content get adj (hex) adj layout (hex)

0x21

0x90

Content get adj (hex) adj layout (hex) layout file name (string)


3. Commands

3.72 get lcd backlight level, read


This command reads the lcd backlight level.

Request

Pos

0

1

Size

1

1

Name get adj lcd blacklight level

Description byte value known as "get adj" 0x21 byte value known as "lcd backlight level" 0xa5

Response

Pos Size

0

1

2

1

1

1

Name get adj lcd blacklight level level

Description byte value known as "get adj" 0x21 byte value known as "lcd backlight level" 0xa5 backlight level range 0->255

Content get adj (hex) lcd backlight level (hex)

Content get adj (hex) lcd backlight level (hex) level (hex)


3. Commands

3.73 get lcd time out, read


This command gets the lcd time out value.

Request

Pos

0

1

Size

1

1

Name get adj adj lcd time out

Response

Pos Size

0

1

2

1

1

1

Name get adj adj lcd time out value

Description byte value known as "get adj" byte value known as "adj lcd time out"

0x21

0xa3

Description byte value known as "get adj" byte value known as "adj lcd time out" lcd time out value in seconds range 0->255

0x21

0xa3

Content get adj (hex) adj lcd time out (hex)

Content get adj (hex) adj lcd time out (hex) lcd time out value (hex)


3. Commands

3.74 get lock, read


This command gets the lock mode.

Request

Pos

0

1

2

Size

1

1

1

Name get adj adj lock manual locking

Description byte value known as "get adj" byte value known as "adj lock" optional manual locking mode can be sent in order to get the vertical refresh reate

0x21

0x99

0xfd

Content get adj (hex) adj lock (hex) manual locking mode (hex)

Response

Pos

0

1

2

Size

1

1

1

Name get adj adj lock lock mode

3-6 4 vertical refresh rate byte value known as "get adj" byte value known as "adj lock" lock mode

Description

In case of manual locking, the vertical refresh rate can also be specified as

DWORD and represented in 1/10000

Hz. (e.g. 00 09 22 20 = 598560 =

59,856Hz)

0x21

0x99

0x00

0x01

0x02

0x03

0x04

0xfd

0xfe

0xff

Content get adj (hex) adj lock (hex)

Free run at 60Hz (hex)

Lock to input 1 (hex)



Lock to input 4 (hex) manual lock (hex) lock to PIP (hex) lock to Main window (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)


3. Commands

3.75 get no signal color logo, read


This command gets the blanking color value and logo status, used when no signal is connected.

Request

Pos

0

1

Size

1

1

Name get adj adj no signal color

Description byte value known as "get adj" 0x21 byte value known as "adj no signal color" 0x7b

Response

Pos Size

0

1

2

1

1

1

Name get adj adj no signal color value

3

4

5

1 red value

1 green value

1 blue value

Description byte value known as "get adj" 0x21 byte value known as "adj no signal color" 0x7b no signal logo status 0x00

0x01 red value range 0->255 green value range 0->255 blue value range 0->255

Content get adj (hex) adj no signal color (hex)

Content get adj (hex) adj no signal color (hex) off (hex) on (hex) red value (hex) green value (hex) blue value (hex)


3. Commands

3.76 get no signal shutdown delay, read


This command gets the no signal shutdown delay, expressed in number of seconds.

Request

Pos

0

1

Size

1

1

2 1

Name get adj adj no signal shutdown delay

Description byte value known as "get adj" byte value known as "adj no signal shutdown" byte value known as

"no signal shutdown delay"

Response

Pos

0

Size

1

1 1

Name get adj adj no signal shutdown

2

3

4-7

1

1

4 delay delay delay value

0x21

0x9a

0x02

Description byte value known as "get adj" byte value known as "adj no signal shutdown" byte value known as

"no signal shutdown delay" byte value known as

"no signal shutdown delay" delay in number of seconds as DWORD

0x21

0x9a

0x02

0x02

Content get adj (hex) adj no signal shutdown (hex) delay (hex)

Content get adj (hex) adj no signal shutdown (hex) delay (hex) delay (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)


3. Commands

3.77 get no signal shutdown status, read


This command gets the no signal shutdown value."Enabled" or "Disabled".

Request

Pos

0

1

Size

1

1

2 1

Name get adj adj no signal shutdown status


"adj no signal shutdown" byte value known as

"no signal shutdown status"

Response

Pos Size

0

1

1

1

Name get adj adj no signal shutdown

2

3

1

1 status value



"no signal shutdown status" status value

0x21

0x9a

Content get adj (hex) adj no signal shutdown (hex)

0x01 status (hex)

0x21

0x9a

Content get adj (hex) adj no signal shutdown (hex)

0x01 status (hex)

0x00

0x01

Disabled (hex)

Enabled (hex)


3. Commands

3.78 get output window native resolution status, read


This command gets the output window native resolution status.

Request

Pos

0

1

Size

1

1

2 1

Name get adj output window native resolution


"adj output window" native resolution

Response

Pos

0

Size

1

1 1

Name get adj output window

2

3

1

1 native resolution value


"adj output window" native resolution value as WORD in big endian (MSB

LSB)

0x21

0x8d

Content get adj (hex) adj window (hex)

0x16 native resolution (hex)

0x21

0x8d


0x16

0

1 native resolution (hex)

Off (dec)

On (dec)


3. Commands

3.79 get output window parameters, read


This command gets the output window parameters.

Request

Pos

0

1

Size

1

1

Name get adj adj output window

2 1 from index


"adj output window" from index specification as BYTE

3 1 to index to index specification as BYTE 0

2

4

6

0

2

4

6

0x21

0x8d


X-Offset (dec)

Y-Offset (dec)

Width (dec)

Height (dec)

X-Offset (dec)

Y-Offset (dec)

Width (dec)

Height (dec)

Response

Pos Size

0

1

1

1

2

Name get adj adj output window

1 from index

3 1 to index


"adj output window" from index specification as BYTE to index specification as BYTE

4 1 window parameter window parameter

About datafield 8 (window parameter)

- all window parameters are expressed as WORD in big endian (MSB LSB)

- the minimum number of parameters is 1

- the maximum number of parameters depends on the specified from and to index

2

4

6

0

6

0

2

4

0x21

0x8d


X-Offset (dec)

Y-Offset (dec)

Width (dec)

Height (dec)

X-Offset (dec)

Y-Offset (dec)

Width (dec)

Height (dec)

MSB (hex)

LSB (hex)


3. Commands

3.80 get output window status, read


This command gets the output window status.

Request

Pos

0

1

Size

1

1


2 1 status


"adj output window" status

Response

Pos

0

Size

1

1 1


2

3

1

1 status value


"adj output window" status value as WORD in big endian (MSB

LSB)

0x21

0x8d


0x40 status (hex)

0x21

0x8d


0x40

0

1 status (hex)

Off (dec)

On (dec)


3. Commands

3.81 get P7 TCGD blue X, read


This command gets the P7 TCGD blue X value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD blue X

Description byte value known as "get adj" byte value known as "adj P7" byte value known as "P7 TCGD" byte value known as

"P7 TCGD blue X"

Response

Pos Size

2

3

0

1

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD blue X

4-5 2 value


"P7 TCGD blue X"

P7 TCGD blue X value as WORD

About datafield 8 (value)

Word value = floating point value * 10000

0x21

0x97

0x00

0x07

Content get adj (hex) adj P7 (hex)

P7 TCGD (hex)

P7 TCGD blue X (hex)

0x21

0x97

0x00

0x07


P7 TCGD (hex)


MSB (hex)

LSB (hex)


3. Commands

3.82 get P7 TCGD blue Y, read


This command gets the P7 TCGD blue Y value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD blue Y


"P7 TCGD blue Y"

Response

Pos Size

2

3

0

1

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD blue Y

4-5 2 value


"P7 TCGD blue Y"

P7 TCGD blue Y value as WORD



0x21

0x97

0x00

0x08


P7 TCGD (hex)

P7 TCGD blue Y (hex)

0x21

0x97

0x00

0x08


P7 TCGD (hex)


MSB (hex)

LSB (hex)


3. Commands

3.83 get P7 TCGD cyan X, read


This command gets the P7 TCGD cyan X value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD cyan X


"P7 TCGD cyan X"

Response

Pos Size

2

3

0

1

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD cyan X

4-5 2 value


"P7 TCGD cyan X"

P7 TCGD cyan X value as WORD

0x21

0x97

0x00

0x0d


P7 TCGD (hex)

P7 TCGD cyan X (hex)

0x21

0x97

0x00

0x0d


P7 TCGD (hex)


MSB (hex)

LSB (hex)




3. Commands

3.84 get P7 TCGD cyan Y, read


This command gets the P7 TCGD cyan Y value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD cyan Y


"P7 TCGD cyan Y"

Response

Pos Size

2

3

0

1

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD cyan Y

4-5 2 value


"P7 TCGD cyan Y"

P7 TCGD cyan Y value as WORD

0x21

0x97

0x00

0x0e


P7 TCGD (hex)

P7 TCGD cyan Y (hex)

0x21

0x97

0x00

0x0e


P7 TCGD (hex)


MSB (hex)

LSB (hex)




3. Commands

3.85 get P7 TCGD green Y, read


This command gets the P7 TCGD green Y value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD green Y


"P7 TCGD green Y"

Response

Pos Size

2

3

0

1

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD green Y

4-5 2 value


"P7 TCGD green Y"

P7 TCGD green Y value as WORD

0x21

0x97

0x00

0x05


P7 TCGD (hex)

P7 TCGD green Y (hex)

0x21

0x97

0x00

0x05


P7 TCGD (hex)


MSB (hex)

LSB (hex)




3. Commands

3.86 get P7 TCGD magenta X, read


This command gets the P7 TCGD magenta X value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD magenta X


"P7 TCGD magenta X"

Response

Pos Size

2

3

0

1

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD magenta X

4-5 2 value


"P7 TCGD magenta X"

P7 TCGD magenta X value as WORD

0x21

0x97

0x00

0x0a

0x21

0x97

0x00

0x0a


P7 TCGD (hex)

P7 TCGD magenta X (hex)


P7 TCGD (hex)


MSB (hex)

LSB (hex)




3. Commands

3.87 get P7 TCGD magenta Y, read


This command gets the P7 TCGD magenta Y value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD magenta Y


"P7 TCGD magenta Y"

Response

Pos Size

2

3

0

1

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD magenta Y

4-5 2 value


"P7 TCGD magenta Y"

P7 TCGD magenta Y value as WORD

0x21

0x97

0x00

0x0b

0x21

0x97

0x00

0x0b


P7 TCGD (hex)

P7 TCGD magenta Y (hex)


P7 TCGD (hex)


MSB (hex)

LSB (hex)


3. Commands

3.88 get P7 TCGD red X, read


This command gets the P7 TCGD red X value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD red X

Description byte value known as "get adj" byte value known as "adj P7"

0x21

0x97 byte value known as "P7 TCGD" 0x00 byte value known as "P7 TCGD red X" 0x01

Response

Pos Size

2

3

0

1

4-5

1

1

1

1

2

Name get adj adj P7

P7 TCGD

P7 TCGD red X value


0x21


P7 TCGD red X value as WORD


P7 TCGD (hex)

P7 TCGD red X (hex)


P7 TCGD (hex)

P7 TCGD red X (hex)

MSB (hex)

LSB (hex)




3. Commands

3.89 get P7 TCGD red Y, read


This command gets the P7 TCGD red Y value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD red Y


0x21

0x97 byte value known as "P7 TCGD" 0x00 byte value known as "P7 TCGD red Y" 0x02

Response

Pos Size

2

3

0

1

4-5

1

1

1

1

2

Name get adj adj P7

P7 TCGD

P7 TCGD red Y value


0x21


P7 TCGD red Y value as WORD


P7 TCGD (hex)

P7 TCGD red Y (hex)


P7 TCGD (hex)

P7 TCGD red Y (hex)

MSB (hex)

LSB (hex)




3. Commands

3.90 get P7 TCGD selection, read


This command gets the P7 TCGD selection.

Request

Pos

2

3

0

1

4

1

1

1

Size

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD all selection

Description byte value known as "get adj" byte value known as "adj P7" byte value known as "P7 TCGD" byte value known as "P7 TCGD all" request P7 selection

Response

Pos

0

3

4

1

2

NA

Size

1 get adj adj P7

P7 TCGD

Name

1

1

1

1

P7 TCGD all selection

NA file name

Description byte value known as "get adj" byte value known as "adj P7" byte value known as "P7 TCGD" byte value known as "P7 TCGD all" request P7 selection name of file with the actual

P7 TCGD values.

name as C-string

0x21

0x97

0x00

0x00

0x01


P7 TCGD (hex) all (hex) selection (hex)

0x21

0x97

0x00

0x00

0x01


P7 TCGD (hex) all (hex) selection (hex) file name (string)


3. Commands

3.91 get P7 TCGD white X, read


This command gets the P7 TCGD white X value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD white X


"P7 TCGD white X"

Response

Pos Size

2

3

0

1

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD white X

4-5 2 value


"P7 TCGD white X"

P7 TCGD white X value as WORD

0x21

0x97

0x00

0x13


P7 TCGD (hex)

P7 TCGD white X (hex)

0x21

0x97

0x00

0x13


P7 TCGD (hex)


MSB (hex)

LSB (hex)




3. Commands

3.92 get P7 TCGD white Y, read


This command gets the P7 TCGD white Y value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD white Y


"P7 TCGD white Y"

Response

Pos Size

2

3

0

1

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD white Y

4-5 2 value


"P7 TCGD white Y"

P7 TCGD white Y value as WORD

0x21

0x97

0x00

0x14


P7 TCGD (hex)

P7 TCGD white Y (hex)

0x21

0x97

0x00

0x14


P7 TCGD (hex)


MSB (hex)

LSB (hex)




3. Commands

3.93 get P7 TCGD yellow X, read


This command gets the P7 TCGD yellow X value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD yellow X


"P7 TCGD yellow X"

Response

Pos Size

2

3

0

1

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD yellow X

4-5 2 value


"P7 TCGD yellow X"

P7 TCGD yellow X value as WORD

0x21

0x97

0x00

0x10


P7 TCGD (hex)

P7 TCGD yellow X (hex)

0x21

0x97

0x00

0x10


P7 TCGD (hex)


MSB (hex)

LSB (hex)




3. Commands

3.94 get P7 TCGD yellow Y, read


This command gets the P7 TCGD yellow Y value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD yellow Y


"P7 TCGD yellow Y"

Response

Pos Size

2

3

0

1

1

1

1

1

Name get adj adj P7

P7 TCGD

P7 TCGD yellow Y

4-5 2 value


"P7 TCGD yellow Y"

P7 TCGD yellow Y value as WORD

0x21

0x97

0x00

0x11


P7 TCGD (hex)

P7 TCGD yellow Y (hex)

0x21

0x97

0x00

0x11


P7 TCGD (hex)


MSB (hex)

LSB (hex)




3. Commands

3.95 get phase, read


This command gets the phase value of the active source.

Request

Pos

0

1

Size

1

1 get adj adj phase

Name Description byte value known as "get adj" byte value known as "adj phase"

Response

Pos Size

0

1

2

1

1

1 get adj adj phase value

Name Description byte value known as "get adj" byte value known as "adj phase" phase value range 0->63

0x21

0x06

Content get adj (hex) adj phase (hex)

0x21

0x06

Content get adj (hex) adj phase (hex) phase value (hex)


3. Commands

3.96 get projector address, read


This command gets the projector address.

Request

Pos

0

Size

1

Name projector address

Description byte value known as "projector address" 0x6d

Response

Pos

0

Size

1

1 1

Name projector address address

Description byte value known as "projector address" 0x6d address

Content projector address (hex)

Content projector address (hex) address (hex)


3. Commands

3.97 get same lens settings status, read


This command gets the same lens settings status.

Request

Pos

0

1

Size

1

1

Name get adj adj same lens settings


"adj same lens settings"

Response

Pos Size

0

1

1

1

Name get adj adj same lens settings

2 1 status


"adj same lens settings" same lens settings status

0x21

0xa2

Content get adj (hex) adj same lens settings (hex)

0x21

0xa2

Content get adj (hex) adj same lens settings (hex)

0x00

0x01 layout specific (hex) same for all layouts (hex)


3. Commands

3.98 get saturation, read


This command gets the saturation value of the active source.

Request

Pos

0

1

Size

1

1

Name get adj adj saturation

Description byte value known as "get adj" byte value known as "adj saturation"

Response

Pos Size

0

1

2

1

1

1

Name get adj adj saturation value

Description byte value known as "get adj" byte value known as "adj saturation" saturation value range 0->255

0x21

0x03

Content get adj (hex) adj saturation (hex)

0x21

0x03

Content get adj (hex) adj saturation (hex) saturation value (hex)


3. Commands

3.99 get scan/orientation configuration , read


This command gets the scan/orientation configuration.

Request

Pos

0

1

Size

1

1 get adj adj scan

Name Description byte value known as "get adj" byte value known as "adj scan"

Response

Pos Size

0

1

2

1

1

1

Name get adj adj scan orientation

Description byte value known as "get adj" byte value known as "adj scan"

Upper nibble (bit 7 -> bit 4)

Orientation configuration

0x40 = Front/Table

0x80 = Front/Ceiling

0x00 = Rear/Table

0xC0 = Rear/Ceiling

Lower nibble (bit 3 -> bit 0)

Auto configuration

0x01 = auto front

0x02 = auto rear

0x21

0x24

Content get adj (hex) adj scan (hex)

0x21

0x24

0x40

0x80

0x00

0xc0

0x01

0x02

Content get adj (hex) adj scan (hex)

Front-Table (hex)

Front-Ceiling (hex)

Rear-Table (hex)

Rear-Ceiling (hex)

Auto-Front (hex)

Auto-Rear (hex)


3. Commands

3.100 get sharpness, read


This command gets the sharpness value of the active source.

Request

Pos

0

1

Size

1

1

Name get adj adj sharpness

Description byte value known as "get adj" byte value known as "adj sharpness"

Response

Pos Size

0

1

2

1

1

1

Name get adj adj sharpness value

Description byte value known as "get adj" byte value known as "adj sharpness" sharpness value range 0->31

0x21

0x05

Content get adj (hex) adj sharpness (hex)

0x21

0x05

Content get adj (hex) adj sharpness (hex) sharpness value (hex)


3. Commands

3.101 get shutter status, read


This command gets the shutter status.

Request

Pos

0

1

Size

1

1

Name get adj adj shutter

Response

Pos Size

0

1

2

1

1

1

Name get adj adj shutter status

Description byte value known as "get adj" byte value known as "adj shutter"

Description byte value known as "get adj" byte value known as "adj shutter" status value

0x21

0x42

Content get adj (hex) adj shutter (hex)

0x21

0x42

0x00

0x01

0x02

Content get adj (hex) adj shutter (hex) closed (hex) open (hex) in between (hex)


3. Commands

3.102 get soft edge black level, read


This command gets the soft edge black level value.

Request

Pos

0

1

Size

1

1

2 1 color

Name Description get adj byte value known as "get adj" adj soft edge black level byte value known as

"adj soft edge black level" color

0x21

0x84

0x00

0x01

0x02

Response

Pos

0

Size

1

1 1

2 1 get adj

Name Description byte value known as "get adj" adj soft edge black level byte value known as color

"adj soft edge black level" color

3 1 value

0x21

0x84 soft edge black level value range 0->255

0x00

0x01

0x02

Content get adj (hex) adj soft edge black level

(hex) red (hex) green (hex) blue (hex)

Content get adj (hex) adj soft edge black level

(hex) red (hex) green (hex) blue (hex) black level value (hex)


3. Commands

3.103 get soft edge size black level bottom, read


This command gets the soft edge size black level bottom value.

Request

Pos

0

1

Size

1

1

2 1 get adj

Name adj soft edge size soft edge size black level bottom


"adj soft edge size" byte value known as

"soft edge size black level bottom"

0x21

0x83

0x05

Response

Pos Size

0

1

1

1

2

3-4

1

2 get adj

Name adj soft edge size soft edge size black level bottom soft edge size black level bottom



"soft edge size black level bottom" soft edge size black level bottom as WORD range depending on the native resolution of the projector.

0x21

0x83

0x05

Content get adj (hex) adj soft edge size (hex) soft edge size black level bottom (hex)

Content get adj (hex) adj soft edge size (hex) soft edge size black level bottom (hex)

MSB (hex)

LSB (hex)


3. Commands

3.104 get soft edge size black level left, read


This command gets the soft edge size black level left value.

Request

Pos

0

1

Size

1

1

2 1 get adj

Name adj soft edge size soft edge size black level left



"soft edge size black level left"

0x21

0x83

0x06

Response

Pos Size

0

1

1

1

2

3-4

1

2 get adj

Name adj soft edge size soft edge size black level left soft edge size black level black level left



"soft edge size black level left" soft edge size black level left as WORD range depending on the native resolution of the projector.

0x21

0x83

0x06

Content get adj (hex) adj soft edge size (hex) soft edge size black level left

(hex)

Content get adj (hex) adj soft edge size (hex) soft edge size black level left

(hex)

MSB (hex)

LSB (hex)


3. Commands

3.105 get soft edge size black level right, read


This command gets the soft edge size black level right value.

Request

Pos

0

1

Size

1

1

2 1 get adj

Name adj soft edge size soft edge size black level right



"soft edge size black level right"

0x21

0x83

0x07

Response

Pos Size

0

1

1

1

2

3-4

1

2 get adj

Name adj soft edge size soft edge size black level right soft edge size black level right



"soft edge size black level right" soft edge size black level right as WORD range depending on the native resolution of the projector.

0x21

0x83

0x07

Content get adj (hex) adj soft edge size (hex) soft edge size black level right (hex)

Content get adj (hex) adj soft edge size (hex) soft edge size black level right (hex)

MSB (hex)

LSB (hex)


3. Commands

3.106 get soft edge size black level top, read


This command gets the soft edge size black level top value.

Request

Pos

0

1

Size

1

1

2 1 get adj

Name adj soft edge size soft edge size black level top



"soft edge size black level top"

0x21

0x83

0x04

Response

Pos Size

0

1

1

1

2

3-4

1

2 get adj

Name adj soft edge size soft edge size black level top soft edge size black level top



"soft edge size black level top" soft edge size black level top as WORD range depending on the native resolution of the projector.

0x21

0x83

0x04

Content get adj (hex) adj soft edge size (hex) soft edge size black level top

(hex)

Content get adj (hex) adj soft edge size (hex) soft edge size black level top

(hex)

MSB (hex)

LSB (hex)


3. Commands

3.107 get soft edge size bottom, read


This command sets the soft edge size bottom value.

Request

Pos

0

1

Size

1

1

Name get adj adj soft edge size

2 1 soft edge size bottom



"soft edge size bottom"

Response

Pos Size

0

1

1

1


2

3-4

1

2 soft edge size bottom soft edge size bottom

0x21

0x83

0x01



"soft edge size bottom" soft edge size bottom as WORD range depending on the native resolution of the projector.

0x21

0x83

0x01

Content get adj (hex) adj soft edge size (hex) soft edge size bottom (hex)

Content get adj (hex) adj soft edge size (hex) soft edge size bottom (hex)

MSB (hex)

LSB (hex)


3. Commands

3.108 get soft edge size left, read


This command gets the soft edge size left value.

Request

Pos

0

1

Size

1

1


2 1 soft edge size left



"soft edge size left"

Response

Pos Size

0

1

1

1


2

3-4

1

2 soft edge size left soft edge size left

0x21

0x83

0x02



"soft edge size left" soft edge size left as WORD range depending on the native resolution of the projector.

0x21

0x83

0x02

Content get adj (hex) adj soft edge size (hex) soft edge size left (hex)

Content get adj (hex) adj soft edge size (hex) soft edge size left (hex)

MSB (hex)

LSB (hex)


3. Commands

3.109 get soft edge size right, read


This command gets the soft edge size right value.

Request

Pos

0

1

Size

1

1


2 1 soft edge size right



"soft edge size right"

Response

Pos Size

0

1

1

1


2

3-4

1

2 soft edge size right soft edge size right

0x21

0x83

0x03



"soft edge size right" soft edge size right as WORD range depending on the native resolution of the projector.

0x21

0x83

0x03

Content get adj (hex) adj soft edge size (hex) soft edge size right (hex)

Content get adj (hex) adj soft edge size (hex) soft edge size right (hex)

MSB (hex)

LSB (hex)


3. Commands

3.110 get soft edge size top, read


This command gets the soft edge size top value.

Request

Pos

0

1

Size

1

1


2 1 soft edge size top



"soft edge size top"

Response

Pos Size

0

1

1

1


2

3-4

1

2 soft edge size top soft edge size top

0x21

0x83

0x00



"soft edge size top" soft edge size top as WORD range depending on the native resolution of the projector.

0x21

0x83

0x00

Content get adj (hex) adj soft edge size (hex) soft edge size top (hex)

Content get adj (hex) adj soft edge size (hex) soft edge size top (hex)

MSB (hex)

LSB (hex)


3. Commands

3.111 get soft edge status, read


This command gets the soft edge status.

Request

Pos

0

1

Size

1

1

Name get adj adj soft edge status


"adj soft edge status"

Response

Pos Size

0

1

1

1

Name get adj adj soft edge status

2 1 status


"adj soft edge status" soft edge status bit 0 = soft edge/scenergix enabled bit 1 = white level alignment lines enabled bit 2 = black level alignment lines enabled bit 3 = data doubling enabled

0x21

0x82

Content get adj (hex) adj soft edge status (hex)

0x21

0x82

Content get adj (hex) adj soft edge status (hex) soft edge status (hex)


3. Commands

3.112 get source, read


This command gets the source selection for the active window.

Request

Pos

0

Size

1

Name get source

Description get source selection

Response

Pos

0

Size

1

1 1

Name get source source selection

Description get source selection source selection

0x32

Content get source (hex)

0x32

0x01

0x02

0x03

0x04

Content get source (hex) input 1 (hex) input 2 (hex) input 3 (hex) input 4 (hex)


3. Commands

3.113 get source extended, read


This command gets the source extended value.

Request

Pos

0

1

Size

1

1

Name get source extended from index

2 1 to index

Description get source extended from index index = 0

=> return active source selection

(input 1 = 0x01 -> input 4 = 0x04) index = 1 => return module mode index = 2 => return module type index = 3

=> return module configuration 1 index = 4


=> return module configuration 3 to index index = 0





=> return module configuration 3

Response

Pos Size

0

1

1

1

Name get source extended from index

Description get source extended from index index = 0







0x34

Content get source ext (hex) from index (hex) to index (hex)

0x34

Content get source ext (hex) from index (hex)

131

3. Commands

Pos

2

3

Size

1 to index

Name

1 response data

Description to index index = 0






- number of bytes depends on the from and to index: at least one and at most 6 bytes will be returned.

- content depends on module type

About datafield 6 (response data) module types

0x00 = No modul

0x01 = DVI/RGB analog

0x02 = SDI

0x03 = 5-Cable

0x04 = HDMI / DP module modes

DVI/RGB analog

0x00 = dvi mode

0x01 = rgb analog hs-vs/cs

0x02 = yuv analog hs-vs/cs

0x03 =dual link DVI

SDI

0x00 = Input 1 (SD, HD or 3G)


0x02 = Input 1 priority over input 2 (SD, HD or 3G)

0x03 = Input 2 priority over input1 (SD, HD or 3G)

0x04 = DUAL HDSDI (uses both inputs)

0x05 = 2xHD (3D only - uses both inputs)

HDMI / DP

0x00 = HDMI

0x01 = Display Port

5-Cable:

0x00 = RGB HS/VS

0x01 = RGB CV: RGB with composite video on HS BNC

0x02 = RGB SOG: RGB with composite sync on G (G/Y/VIDEO BNC)

0x03 = YUV HS/VS

0x04 = YUV CV: YUV with composite video on HS BNC

132

Content to index (hex) response data (hex)


0x05 = YUV SOY: RGB with composite sync on Y (G/Y/VIDEO BNC)

0x06 = CVBS: composite video on G/Y/VIDEO BNC

0x07 = S-VIDEO: separate video with Y on G/Y/VIDEO BNC and Cr on V/Cr BNC

Auto configuration is provided via the next modes:

0x08 = RGB AUTO: to do auto configuration between modes 0, 1 and 2

0x09 = YUV AUTO: to do auto configuration between modes 3, 4 and 5

0x0a = CVBS/S-VIDEO AUTO: to do auto configuration between modes 6 and 7 module configurations 1

SDI

0x00 = 4:2:2 YCbCr 10b

0x01 = 4:4:4 YCbCr 10b

0x02 = 4:4:4 RGB 10b

0x03 = 4:4:4 YCbCr 12b

0x04 = 4:4:4 RGB 12b

0x05 = 4:2:2 YCbCr 12b module configurations 2

SDI

0x00 = Dual: Normal

0x01 = Dual: Swap links module configurations 3

SDI

0x00 = 3G: Dual HD

0x01 = 3G: Direct mapping

0x02 = 3G-B: 2xHD (3D-only)

3. Commands


3. Commands

3.114 get text on, read


This command gets the text on status.

Request

Pos

0

1

Size

1

1

Name get adj adj text on

Response

Pos Size

0

1

2

1

1

1

Name get adj adj text on text on status

Description byte value known as "get adj" byte value known as "adj text on"

Description byte value known as "get adj" byte value known as "adj text on" text on status

0x21

0x93

Content get adj (hex) adj text on (hex)

0x21

0x93

0x00

0x01

Content get adj (hex) adj text on (hex) off (hex) on (hex)


3. Commands

3.115 get tint, read


This command gets the tint value of the active source.

Request

Pos

0

1

Size

1

1 get adj adj tint

Name Description byte value known as "get adj" byte value known as "adj tint"

Response

Pos Size

0

1

2

1

1

1 get adj adj tint value

Name Description byte value known as "get adj" byte value known as "adj tint" tint value range 0->128

0x21

0x04

Content get adj (hex) adj tint (hex)

0x21

0x04

Content get adj (hex) adj tint (hex) tint value (hex)


3. Commands

3.116 get warp axis position, read


This command gets the warp axis position. This is the center used for the rotation command. Valid from v1.6.

Request

Pos

0

1

2

Size

1

1

1

Name get adj adj warp warp axis position

Description byte value known as "get adj" byte value known as "adj warp"

0x21

0xa1 byte value known as "warp axis position" 0x30

Content get adj (hex) adj warp (hex) warp axis position (hex)

Response

Pos

0

Size

1

1

2

3-6

1

1

4

Name get adj adj warp warp axis position axis position X value

7-10 4 axis position Y value

Description byte value known as "get adj" 0x21 byte value known as "adj warp" 0xa1 byte value known as "warp axis position" 0x30

X value as float (IEE-754 4bytes)

Y value as float (IEE-754 4bytes)

Content get adj (hex) adj warp (hex) warp axis position (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.117 get warp file, read


This command gets the active warp file.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name get adj adj warp warp file action parameter

Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp file" optional action parameter.

If this parameter is omitted, the active file is returned. Otherwise a file list of warp files is returned in xml format.

0x21

0xa1

0x80

0x01

Content get adj (hex) adj warp (hex) warp file (hex) get a filelist of warp files in xlm format (hex)

Response

Pos

0

Size

1

1

2

3

1

1

1

Name get adj adj warp warp file action parameter

NA

NA

NA file name

NA file list

Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp file" optional action parameter.

If this parameter is omitted, the active file is returned. Otherwise a file list of warp files is returned in xml format.

active warp file name as C-string if optional parameter is omitted.

file list in xml format as C-string if optional parameter is 0x01.

0x21

0xa1

0x80

0x01

Content get adj (hex) adj warp (hex) warp file (hex) get a filelist of warp files in xlm format (hex) file name (string) file list (string)


3. Commands

3.118 get warp grid size, read


This command gets the warp grid size value.

Request

Pos

0

1

2

Size

1

1

1

Name get adj adj warp warp grid size

Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp grid size"

Response

Pos

0

Size

1

1

2

3

1

1

1

4 1

Name get adj adj warp warp grid size

Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp grid size" ver number of grid lines vertical numbers of grid lines only 2, 3, 5, 9, 17 and 33 are valid numbers hor number of grid lines horizontal number of grid lines only 2, 3, 5, 9, 17 and 33 are valid numbers

0x21

0xa1

0x18

Content get adj (hex) adj warp (hex) warp grid size (hex)

0x21

0xa1

0x18

Content get adj (hex) adj warp (hex) warp grid size (hex) ver number of grid lines

(hex) hor number of grid lines

(hex)


3. Commands

3.119 get warp hierarchic keystone in X direction, read


This command gets the hierarchic warp keystone value in X direction.

Valid from v1.6.

Request

Pos

0

1

2

Size

1

1

1

3 1

Name get adj adj warp warp hierarchic keystone in X direction warp area

Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp hierarchic keystone in X direction" warp area.

optional field added from version 1.6.

If omitted in the request, it does not appear in the response. The default area is "all area" in this case.

Response

Pos

0

Size

1

1

2

1

1

3 1

Name get adj adj warp warp hierarchic keystone in X direction warp area

Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp hierarchic keystone in X direction" warp area.



0x21

0xa1

0x53

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07

0x08

4-7 4 keystone in X direction keystone in X direction value as float

(IEE-754 4bytes)

0x21

0xa1

0x53

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07

0x08

Content get adj (hex) adj warp (hex) warp hierarchic keystone in

X direction (hex) all area (hex) right area (hex) bottom area (hex) top area (hex) left area (hex) left top area (hex) right top area (hex) left bottom area (hex) right bottom area (hex)



BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.120 get warp hierarchic keystone in Y direction, read


This command gets the hierarchic warp keystone value in Y direction.

Valid from v1.6.

Request

Pos

0

1

2

3

Size

1

1

1

1

Name get adj adj warp warp hierarchic keystone in Y direction warp area

Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp hierarchic keystone in Y direction" warp area.



Response

Pos

0

Size

1

1

2

1

1

3 1

Name get adj adj warp warp hierarchic keystone in Y direction warp area

Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp hierarchic keystone in Y direction" warp area.



0x21

0xa1

0x54

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07

0x08

4-7 4 keystone in Y direction keystone in Y direction value as float

(IEE-754 4bytes)

0x21

0xa1

0x54

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07

0x08


Y direction (hex) all area (hex) right area (hex) bottom area (hex) top area (hex) left area (hex) left top area (hex) right top area (hex) left bottom area (hex) right bottom area (hex)



BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.121 get warp hierarchic linearity in X direction, read


This command gets the hierarchic warp linearity value in X direction.

Valid from v1.6.

Request

Pos

0

1

2

Size

1

1

1

3 1

Name get adj adj warp warp hierarchic linearity in X direction warp area

Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp hierarchic linearity in X direction" warp area.



Response

Pos

0

Size

1

1

2

1

1

3 1

Name get adj adj warp warp hierarchic linearity in X direction warp area

Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp hierarchic linearity in X direction" warp area.



0x21

0xa1

0x51

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07

0x08

4-7 4 linearity in X direction linearity in X direction value as float

(IEE-754 4bytes)

0x21

0xa1

0x51

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07

0x08

Content get adj (hex) adj warp (hex) warp hierarchic linearity in X direction (hex) all area (hex) right area (hex) bottom area (hex) top area (hex) left area (hex) left top area (hex) right top area (hex) left bottom area (hex) right bottom area (hex)

Content get adj (hex) adj warp (hex) warp hierarchic linearity in X direction (hex) all area (hex) right area (hex) bottom area (hex) top area (hex) left area (hex) left top area (hex) right top area (hex) left bottom area (hex) right bottom area (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.122 get warp hierarchic linearity in Y direction, read


This command gets the hierarchic warp linearity value in Y direction.

Valid from v1.6.

Request

Pos

0

1

2

3

Size

1

1

1

1

Name get adj adj warp warp hierarchic linearity in Y direction warp area

Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp hierarchic linearity in Y direction" warp area.



Response

Pos

0

Size

1

1

2

1

1

3 1

Name get adj adj warp warp hierarchic linearity in Y direction warp area

Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp hierarchic linearity in Y direction" warp area.



0x21

0xa1

0x52

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07

0x08

4-7 4 linearity in Y direction linearity in Y direction value as float

(IEE-754 4bytes)

0x21

0xa1

0x52

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07

0x08

Content get adj (hex) adj warp (hex) warp hierarchic linearity in Y direction (hex) all area (hex) right area (hex) bottom area (hex) top area (hex) left area (hex) left top area (hex) right top area (hex) left bottom area (hex) right bottom area (hex)

Content get adj (hex) adj warp (hex) warp hierarchic linearity in Y direction (hex) all area (hex) right area (hex) bottom area (hex) top area (hex) left area (hex) left top area (hex) right top area (hex) left bottom area (hex) right bottom area (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.123 get warp hierarchic point shift, read


This command gets the hierarchic warp point shift value.

Valid from v1.6.

Request

Pos

0

1

2

Size

1

1

1

3 1

Name get adj adj warp warp hierarchic point shift horizontal warp area

Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp hierarchic point shift" warp area.



0x21

0xa1

0x50

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07

0x08

4

5

1

1

X position

Y position

Response

Pos

0

Size

1

1

2

1

1

3 1

Name get adj adj warp warp hierarchic point shift horizontal warp area

4

5

6-9

1

1

4

X position

Y position

X shift value

X position of the pixel to shift

Y position of the pixel to shift

Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp hierarchic point shift" warp area.



0x21

0xa1

0x50

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07

0x08



X shift value as float (IEE-754 4bytes)

10-13 4 Y shift value Y shift value as float (IEE-754 4bytes)

Content get adj (hex) adj warp (hex) warp hierarchic point shift

(hex) all area (hex) right area (hex) bottom area (hex) top area (hex) left area (hex) left top area (hex) right top area (hex) left bottom area (hex) right bottom area (hex)

X position (0 - 32) (hex)

Y position (0 - 32) (hex)

Content get adj (hex) adj warp (hex) warp hierarchic point shift




BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.124 get warp keystone horizontal. Deprecated from version 1.6, read


This command gets the warp keystone horizontal value.

Request

Pos

0

1

2

Size

1

1

1 get adj adj warp

Name Description byte value known as "get adj" byte value known as "adj warp" warp keystone horizontal byte value known as

"warp keystone horizontal"

0x21

0xa1

0x02

Content get adj (hex) adj warp (hex) warp keystone horizontal

(hex)

Response

Pos

0

Size

1

1

2

1

1

3-6 4 get adj

Name Description byte value known as "get adj" adj warp byte value known as "adj warp" warp keystone horizontal byte value known as keystone value

"warp keystone horizontal" keystone value as float (IEE-754 4bytes)

0x21

0xa1

0x02

Content get adj (hex) adj warp (hex) warp keystone horizontal

(hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.125 get warp keystone vertical. Deprecated from version 1.6, read


This command gets the warp keystone vertical value.

Request

Pos

0

1

2

Size

1

1

1

Name get adj adj warp warp keystone vertical

Description byte value known as "get adj" byte value known as "adj warp" byte value known as

"warp keystone vertical"

0x21

0xa1

0x01

Content get adj (hex) adj warp (hex) warp keystone vertical (hex)

Response

Pos

0

Size

1

1

2

1

1

Name get adj adj warp warp keystone vertical

3-6 4 keystone value


"warp keystone vertical" keystone value as float (IEE-754 4bytes)

0x21

0xa1

0x01

Content get adj (hex) adj warp (hex) warp keystone vertical (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.126 get warp line shift horizontal. Deprecated from version 1.6, read


This command gets the warp line shift horizontal value.

Request

Pos

0

1

2

Size

1

1

1 get adj adj warp

Name Description byte value known as "get adj" byte value known as "adj warp" warp line shift horizontal byte value known as

"warp line shift horizontal"

0x21

0xa1

0x16

Content get adj (hex) adj warp (hex) warp line shift horizontal

(hex)

Response

Pos

0

Size

1

1

2

1

1

3-6 4 get adj

Name Description byte value known as "get adj" adj warp byte value known as "adj warp" warp line shift horizontal byte value known as line shift value

"warp line shift horizontal" line shift value as float (IEE-754 4bytes)

0x21

0xa1

0x16

Content get adj (hex) adj warp (hex) warp line shift horizontal

(hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.127 get warp line shift vertical. Deprecated from version 1.6, read


This command gets the warp line shift vertical value.

Request

Pos

0

1

2

Size

1

1

1

Name get adj adj warp warp line shift vertical


"warp line shift vertical"

0x21

0xa1

0x15

Content get adj (hex) adj warp (hex) warp line shift vertical (hex)

Response

Pos

0

Size

1

1

2

1

1

Name get adj adj warp warp line shift vertical

3-6 4 line shift value


"warp line shift vertical" line shift value as float (IEE-754 4bytes)

0x21

0xa1

0x15

Content get adj (hex) adj warp (hex) warp line shift vertical (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.128 get warp linearity horizontal. Deprecated from version 1.6, read


This command gets the warp linearity horizontal value.

Request

Pos

0

1

2

Size

1

1

1 get adj adj warp

Name Description byte value known as "get adj" byte value known as "adj warp" warp linearity horizontal byte value known as

"warp linearity horizontal"

0x21

0xa1

0x0f

Content get adj (hex) adj warp (hex) warp linearity horizontal

(hex)

Response

Pos

0

Size

1

1

2

1

1

3-6 4 get adj

Name Description byte value known as "get adj" adj warp byte value known as "adj warp" warp linearity horizontal byte value known as linearity value

"warp linearity horizontal" linearity value as float (IEE-754 4bytes)

0x21

0xa1

0x0f

Content get adj (hex) adj warp (hex) warp linearity horizontal

(hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE2 (hex)

BYTE 3 (hex)


3. Commands

3.129 get warp linearity vertical. Deprecated from version 1.6, read


This command gets the warp linearity vertical value.

Request

Pos

0

1

2

Size

1

1

1

Name get adj adj warp warp linearity vertical


"warp linearity vertical"

0x21

0xa1

0x10

Content get adj (hex) adj warp (hex) warp linearity vertical (hex)

Response

Pos

0

Size

1

1

2

1

1

Name get adj adj warp warp linearity vertical

3-6 4 linearity value


"warp linearity vertical" linearity value as float (IEE-754 4bytes)

0x21

0xa1

0x10

Content get adj (hex) adj warp (hex) warp linearity vertical (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.130 get warp pin barrel horizontal. Deprecated from version 1.6, read


This command gets the warp pin barrel horizontal value.

Request

Pos

0

1

2

Size

1

1

1 get adj adj warp

Name Description byte value known as "get adj" byte value known as "adj warp" warp pin barrel horizontal byte value known as

"warp pin barrel horizontal"

0x21

0xa1

0x0e

Content get adj (hex) adj warp (hex) warp pin barrel horizontal

(hex)

Response

Pos

0

Size

1

1

2

1

1

3-6 4 get adj

Name Description byte value known as "get adj" adj warp byte value known as "adj warp" warp pin barrel horizontal byte value known as barrel value

"warp pin barrel horizontal" barrel value as float (IEE-754 4bytes)

0x21

0xa1

0x0e

Content get adj (hex) adj warp (hex) warp pin barrel horizontal

(hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.131 get warp pin barrel vertical. Deprecated from version 1.6, read


This command gets the warp pin barrel vertical value.

Request

Pos

0

1

2

Size

1

1

1

Name get adj adj warp warp pin barrel vertical


"warp pin barrel vertical"

0x21

0xa1

0x0d

Content get adj (hex) adj warp (hex) warp pin barrel vertical (hex)

Response

Pos

0

Size

1

1

2

1

1

Name get adj adj warp warp pin barrel vertical

3-6 4 barrel value


"warp pin barrel vertical" barrel value as float (IEE-754 4bytes)

0x21

0xa1

0x0d

Content get adj (hex) adj warp (hex) warp pin barrel vertical (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.132 get warp point shift. Deprecated from version 1.6, read


This command gets the warp point shift value.

Request

Pos

0

1

2

Size

1

1

1

Name get adj adj warp warp point shift

Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp point shift"

0x21

0xa1

0x17

Response

Pos

0

Size

1

1

2

3-6

1

1

4

Name get adj adj warp warp point shift

X shift value

Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp point shift"


0x21

0xa1

0x17


Content get adj (hex) adj warp (hex) warp point shift (hex)

Content get adj (hex) adj warp (hex) warp point shift (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.133 get warp rotation, read


This command gets the warp rotation value.

Request

Pos

0

1

2

Size

1

1

1

Name get adj adj warp warp rotation

Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp rotation"

Response

Pos

0

Size

1

1

2

3-6

1

1

4

Name get adj adj warp warp rotation angle value

Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp rotation" angle value as float (IEE-754 4bytes)

0x21

0xa1

0x03

Content get adj (hex) adj warp (hex) warp rotation (hex)

0x21

0xa1

0x03

Content get adj (hex) adj warp (hex) warp rotation (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.134 get warp scale horizontal., read


This command gets the warp scale horizontal value.

Request

Pos

0

1

2

Size

1

1

1

Name get adj adj warp warp scale horizontal

3 1 warp area


"warp scale horizontal" warp area.



0x21

0xa1

0x12

Content get adj (hex) adj warp (hex) warp scale horizontal (hex)

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07

0x08 all area (hex) right area (hex) bottom area (hex) top area (hex) left area (hex) left top area (hex) right top area (hex) left bottom area (hex) right bottom area (hex)

Response

Pos Size

0

1

2

1

1

1

Name get adj adj warp warp scale horizontal

3 1 warp area

4-7 4 scale value





scale value as float (IEE-754 4bytes)

0x21

0xa1

0x12

Content get adj (hex) adj warp (hex) warp scale horizontal (hex)

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.135 get warp scale vertical., read


This command gets the warp scale vertical value.

Request

Pos

0

1

2

Size

1

1

1

Name get adj adj warp warp scale vertical

3 1 warp area


"warp scale vertical" warp area.



0x21

0xa1

0x11

Content get adj (hex) adj warp (hex) warp scale vertical (hex)

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07


Response

Pos Size

0

1

2

1

1

1

Name get adj adj warp warp scale vertical

3 1 warp area

4-7 4 scale value





scale value as float (IEE-754 4bytes)

0x21

0xa1

0x11

Content get adj (hex) adj warp (hex) warp scale vertical (hex)

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.136 get warp shift horizontal, read


This command gets the warp shift horizontal value.

Request

Pos

0

1

2

Size

1

1

1

Name get adj adj warp warp shift horizontal


"warp shift horizontal"

Response

Pos

0

Size

1

1

2

1

1

Name get adj adj warp warp shift horizontal


0x21

0xa1

0x14


"warp shift horizontal" line shift value as float (IEE-754 4bytes)

0x21

0xa1

0x14

Content get adj (hex) adj warp (hex) warp shift horizontal (hex)

Content get adj (hex) adj warp (hex) warp shift horizontal (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.137 get warp shift vertical, read


This command gets the warp shift vertical value.

Request

Pos

0

1

2

Size

1

1

1

Name get adj adj warp warp shift vertical

Description byte value known as "get adj" byte value known as "adj warp"

0x21

0xa1 byte value known as "warp shift vertical" 0x13

Response

Pos

0

Size

1

1

2

3-6

1

1

4

Name get adj adj warp warp shift vertical line shift value

Description byte value known as "get adj" 0x21 byte value known as "adj warp" 0xa1 byte value known as "warp shift vertical" 0x13 line shift value as float (IEE-754 4bytes)

Content get adj (hex) adj warp (hex) warp shift vertical (hex)

Content get adj (hex) adj warp (hex) warp shift vertical (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.138 get warp status, read


This command gets the warp status value.

Request

Pos

0

1

2

Size

1

1

1

Name get adj adj warp warp status

Response

Pos

0

Size

1

1

2

3

1

1

1

Name get adj adj warp warp status status value

4-5 2 optional warp enable command fields

Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp status"

0x21

0xa1

0x00

Content get adj (hex) adj warp (hex) warp status (hex)

Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp status" status value

2 byte bit field is added when status =

0x01

0x21

0xa1

0x00

0x00

0x01

0x02

0xff move points shift grid line linearity pincushion barrel keystone scale

Content get adj (hex) adj warp (hex) warp status (hex) off (hex) on (with commands) (hex) on (with files) (hex) no warp available (hex) deprecated from version 1.6

(bit) deprecated from version 1.6




(bit) shift rotate

Hierarchic points unused unused unused unused unused unused four corner deprecated from version 1.6

(bit)


3. Commands

3.139 get warp X1. Deprecated from version 1.6, read


This command gets the warp X1 value.

Request

Pos

0

1

2

Size

1

1

1 get adj adj warp warp X1

Name Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp X1"

Response

Pos

0

Size

1

1

2

3-6

1

1


X1 value


X1 value as float (IEE-754 4bytes)

0x21

0xa1

0x05

Content get adj (hex) adj warp (hex) warp X1 (hex)

0x21

0xa1

0x05


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands




Request

Pos

0

1

2

Size

1

1



Response

Pos

0

Size

1

1

2

3-6

1

1


X2 value



0x21

0xa1

0x07


0x21

0xa1

0x07


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands




Request

Pos

0

1

2

Size

1

1



Response

Pos

0

Size

1

1

2

3-6

1

1


X3 value



0x21

0xa1

0x09


0x21

0xa1

0x09


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands




Request

Pos

0

1

2

Size

1

1



Response

Pos

0

Size

1

1

2

3-6

1

1


X4 value



0x21

0xa1

0x0b


0x21

0xa1

0x0b


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.143 get warp Y1. Deprecated from version 1.6, read


This command gets the warp Y1 value.

Request

Pos

0

1

2

Size

1

1

1 get adj adj warp warp Y1

Name Description byte value known as "get adj" byte value known as "adj warp" byte value known as "warp Y1"

Response

Pos

0

Size

1

1

2

3-6

1

1


Y1 value


Y1 value as float (IEE-754 4bytes)

0x21

0xa1

0x06

Content get adj (hex) adj warp (hex) warp Y1 (hex)

0x21

0xa1

0x06


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands




Request

Pos

0

1

2

Size

1

1



Response

Pos

0

Size

1

1

2

3-6

1

1


Y2 value



0x21

0xa1

0x08


0x21

0xa1

0x08


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands




Request

Pos

0

1

2

Size

1

1



Response

Pos

0

Size

1

1

2

3-6

1

1


Y3 value



0x21

0xa1

0x0a


0x21

0xa1

0x0a


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands




Request

Pos

0

1

2

Size

1

1



Response

Pos

0

Size

1

1

2

3-6

1

1


Y4 value



0x21

0xa1

0x0c


0x21

0xa1

0x0c


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.147 get window selection, read


This command gets the window selected for adjustments.

Request

Pos

0

1

Size

1

1

Name window get window selection

Description byte value known as "window" byte value known as

"get window selection"

Response

Pos Size

0

1

1

1

Name window get window selection

2 1 selection

Description byte value known as "window" byte value known as

"get window selection" window selection

0x8f

0x08

Content window (hex) get window selection (hex)

0x8f

0x08

Content window (hex) get window selection (hex)

0x00

0x01

Main (hex)

PIP (hex)


3. Commands

3.148 increment blanking bottom, write


This command increments the blanking bottom by one.

Request

Pos

0

1

Size

1

1

Name inc adj adj blanking bottom

Description byte value known as "inc adj" byte value known as


0x22

0x4d

Content inc adj (hex) adj blanking bottom (hex)


3. Commands

3.149 increment blanking left, write


This command increments the blanking left by one.

Request

Pos

0

1

Size

1

1

Name inc adj adj blanking left

Description byte value known as "inc adj" byte value known as "adj blanking left"

0x22

0x4e

Content inc adj (hex) adj blanking left (hex)


3. Commands

3.150 increment blanking right, write


This command increments the blanking right by one.

Request

Pos

0

1

Size

1

1

Name inc adj adj blanking right

Description byte value known as "inc adj" 0x22 byte value known as "adj blanking right" 0x4f

Content inc adj (hex) adj blanking right (hex)


3. Commands

3.151 increment blanking top, write


This command increments the blanking top by one.

Request

Pos

0

1

Size

1

1

Name inc adj adj blanking top

Description byte value known as "inc adj" 0x22 byte value known as "adj blanking top" 0x45

Content inc adj (hex) adj blanking top (hex)


3. Commands

3.152 increment brightness, write


This command increments the brightness by one.

Request

Pos

0

Size

1

Name increment brightness

Description increment brightness 0x03

Content inc brightness (hex)


3. Commands

3.153 increment color balance blue green, write


This command increments the color balance blue green by one.

Request

Pos

0

1

Size

1

1

Name inc adj adj color balance blue green



0x22

0x44

Content inc adj (hex) adj color balance blue green

(hex)


3. Commands

3.154 increment color balance red green, write


This command increments the color balance red green by one.

Request

Pos

0

1

Size

1

1

Name inc adj adj color balance red green



0x22

0x43

Content inc adj (hex) adj color balance red green

(hex)


3. Commands

3.155 increment contrast, write


This command increments the contrast by one.

Request

Pos

0

Size

1

Name increment contrast

Description increment contrast 0x01

Content increment contrast (hex)


3. Commands

3.156 increment dimming value, write


This command increments the dimming value by one.

The higher the value the brighter the light output.

Request

Pos

0

1

Size

1

1

Name inc adj adj dimming

Description byte value known as "inc adj" byte value known as "adj dimming"

0x22

0x0d

Content inc adj (hex) adj dimming (hex)


3. Commands

3.157 increment gamma, write


This command increments the gamma by one.

Request

Pos

0

1

Size

1

1

Name inc adj adj gamma

Description byte value known as "inc adj" byte value known as "adj gamma"

0x22

0x70

Content inc adj (hex) adj gamma (hex)


3. Commands

3.158 increment input black balance, write


This command increments the input black balance by one.

Request

Pos

0

1

Size

1

1

Name inc adj adj input black balance


"adj input black balance"

0x22

0x6e

Content inc adj (hex) adj input black balance (hex)


3. Commands

3.159 increment input white balance, write


This command increments the input white balance by one.

Request

Pos

0

1

Size

1

1

Name inc adj adj input white balance


"adj input white balance"

0x22

0x6f

Content inc adj (hex) adj input white balance (hex)


3. Commands

3.160 increment phase, write


This command increments the phase by one.

Request

Pos

0

Size

1

Name increment phase

Description increment phase 0x0B

Content inc phase (hex)


3. Commands

3.161 increment saturation, write


This command increments the saturation by one.

Request

Pos

0

Size

1

Name increment saturation

Description increment saturation 0x05

Content inc saturation (hex)


3. Commands

3.162 increment sharpness, write


This command increments the sharpness by one.

Request

Pos

0

Size

1

Name increment sharpness

Description increment sharpness 0x09

Content inc sharpness (hex)


3. Commands

3.163 increment shutter, write


This command opens the shutter.

Request

Pos

0

1

2

Size

1

1

1

Name inc adj adj shutter value

Description byte value known as "inc adj" byte value known as "adj shutter" value should be 0x00 in order to be valid.

0x22

0x42

0x00

Content inc adj (hex) adj shutter (hex) value (hex)


3. Commands

3.164 increment tint, write


This command increments the tint by one.

Request

Pos

0

Size

1

Name increment tint increment tint

Description

0x07

Content increment tint (hex)


3. Commands

3.165 input format horizontal total possible, read


This command checks if input format horizontal total adjustment is possible.

Request

Pos

0

1

Size

1

1

Name adj possible adj input format

Description value known as "adj possible" value known as "adj input format"

Response

Pos Size

0

1

2

1

1

1

Name adj possible adj input format possible

Description value known as "adj possible" value known as "adj input format" adjustment is possible or not

0x29

0x8e

Content adj possible (hex) input format (hex)

0x29

0x8e

0x00

0x01

Content adj possible (hex) input format (hex) not possible (hex) possible (hex)


3. Commands

3.166 phase possible, read


This command checks if phase adjustment is possible.

Request

Pos

0

1

Size

1

1

Name adj possible adj phase

Description value known as "adj possible" value known as "adj phase"

Response

Pos Size

0

1

2

1

1

1

Name adj possible adj phase possible

Description value known as "adj possible" value known as "adj phase" adjustment is possible or not

0x29

0x06

Content adj possible (hex) phase (hex)

0x29

0x06

0x00

0x01

Content adj possible (hex) phase (hex) not possible (hex) possible (hex)


3. Commands

3.167 read auto picture alignment configuration, read


This command reads the auto picture alignment configuration.

Request

Pos

0

1

Size

1

1

Name file read auto picture alignment

Description byte value known as "file" byte value known as

"read auto picture alignment"

Response

Pos Size

0

1

1

1

Name file read auto picture alignment

2 1 configuration


"read auto picture alignment" configuration

0xbd

0x88

Content file (hex) read auto picture alignment

(hex)

0xbd

0x88

0x00

0x01

0x02

Content file (hex) read auto picture alignment

(hex) at file load (hex) off (hex) always (hex)


3. Commands

3.168 read barscale position, read


This command reads the barscale position.

Request

Pos

0

1

Size

1

1

Name projector info read barscale position

Description byte value known as "projector info" byte value known as

"read barscale position"

Response

Pos

0

Size

1

1 1

Name projector info read barscale position

2 1 position


"read barscale position" position value

0xf5

0x02

Content projector info (hex) read barscale position (hex)

0xf5

0x02

Content projector info (hex) read barscale position (hex)

0x11

0x12

0x13

0x21

0x22

0x23

0x31

0x32

0x33

Top Left (hex)

Top Mid (hex)

Top Right (hex)

Mid Left (hex)

Mid Mid (hex)

Mid Right (hex)

Bottom Left (hex)

Bottom Mid (hex)

Bottom Right (hex)


3. Commands

3.169 read customer id, read


This command reads the customer id.

Request

Pos

0

1

Size

1

1

Name projector info read customer id

Response

Pos Size

0

1

1

1

NA

Name projector info read customer id

NA customer ID

Description byte value known as "projector info" 0xf5 byte value known as "read customer id" 0x01

Content projector info (hex) read customer id (hex)

Description byte value known as "projector info" 0xf5 byte value known as "read customer id" 0x01 customer ID as C-string

Content projector info (hex) read customer id (hex) customer ID (string)


3. Commands

3.170 read date time, read


This command reads date and time.

Request

Pos

0

1

Size

1

1

Name projector info read date time

Response

Pos Size

0

1

1

1

NA

Name projector info read date time

NA date and time

About datafield 4 (date and time)

YYYY 4-digit for the Year

MM 2-digit for the Month

DD 2-digit for the Day hh 2-digiti for the Hour mm 2-digit for the Minutes

Description byte value known as "projector info" byte value known as "read date time"

0xf5

0x05

Content projector info (hex) read date time (hex)

Description byte value known as "projector info" byte value known as "read date time" date and time as C-string in following format: YYYY.MM.DDhh:mm

0xf5

0x05

Content projector info (hex) read date time (hex) date and time (string)


3. Commands

3.171 read DMX address, read


This command reads the DMX address.

Request

Pos

0

1

Size

1

1

Name

DMX read DMX address

Description byte value known as "DMX" byte value known as

"read DMX address"

Response

Pos Size

0

1

1

1

Name

DMX read DMX address

2-3 2 DMX address


"read DMX address"

DMX address as WORD range 1 -> 512

0x57

0x40

Content

DMX (hex) read DMX address (hex)

0x57

0x40

Content

DMX (hex) read DMX address (hex)

MSB (hex)

LSB (hex)


3. Commands

3.172 read DMX mode, read


This command reads the DMX mode.

Request

Pos

0

1

Size

1

1

Name

DMX read DMX mode

Response

Pos Size

0

1

1

1

Name

DMX read DMX mode

2 1 mode


"read DMX mode"


"read DMX mode"

DMX mode

0x57

0x42

Content

DMX (hex) read DMX mode (hex)

0x57

0x42

Content

DMX (hex) read DMX mode (hex)

0x00

0x01

0x02 full (hex) basic (hex) extended (hex)


3. Commands

3.173 read DMX universe, read


This command reads the DMX universe applicable to Art-Net.

Request

Pos

0

1

Size

1

1

Name

DMX read DMX universe


"read DMX universe"

Response

Pos Size

0

1

1

1

Name dmx read DMX universe

2-3 2 universe value

Description byte value known as Dmx byte value known as

"read DMX universe" universe value as a WORD

About datafield 4 (universe value) current implementation takes only LSB value into account

0x57

0x45

Content

DMX (hex) read DMX universe (hex)

0x57

0x45

Content dmx (hex) read DMX universe (hex)

MSB (hex)

LSB (hex)


3. Commands

3.174 read gateway configuration, read


This command reads the gateway configuration.

Request

Pos

0

1

Size

1

1

Name network read gateway configuration

Description value known as "network" read gateway configuration

Response

Pos

0

Size

1

1 1

2 1

Name network read gateway configuration config

Description value known as "network" read gateway configuration gateway configuration

0x11

0x0b

Content network (hex) read gateway configuration

(hex)

0x11

0x0b

0x00

0x01

Content network (hex) read gateway configuration

(hex) wired (hex) wireless (hex)


3. Commands

3.175 read global software version, read


This command reads the global software version.

Request

Pos

0

Size

1

Name read version

Description byte value known as "read version"

Response

Pos

0

NA

Size

1

Name read version

NA version

0x60

Description byte value known as "read version" global version as Pascal language string

0x60

Content read version (hex)

Content read version (hex) version (string)


3. Commands

3.176 read image load method, read


This command reads the image load method.

Request

Pos

0

1

Size

1

1

Name Description file byte value known as "file" read image load method read image load method

Response

Pos

0

Size

1

1 1 file

Name Description byte value known as "file" read image load method read image load method

2 1 load method value load method value

0xbd

0x05

Content file (hex) read image load method

(hex)

0xbd

0x05

0x00

0x01

0x02

Content file (hex) read image load method

(hex) manual (hex) auto (hex) custom only (hex)


3. Commands

3.177 read infrared ports, read


This command reads the infrared ports.

Request

Pos

0

Size

1

Name read ir ports

Response

Pos

0

Size

1

1 1

Name read ir ports ir ports status

Description byte value known as "read ir ports"

Description byte value known as "read ir ports" ir ports status as byte value

0x6f

Content read ir ports (hex)

0x6f

Content read ir ports (hex) bit 7 reserved (bit) bit 6 reserved (bit) bit 5 reserved (bit) bit 4 reserved (bit) bit 3 side receiver (bit) bit 2 reserved (bit) bit 1 rear receiver (bit) bit 0 front receiver (bit)

About datafield 2 (ir ports status) bit value 0 = disabled bit value 1 = enabled


3. Commands

3.178 read lamp CLO status, read


This command reads the lamp CLO (Contstant Light Output) status.

Request

Pos

0

1

Size

1

1

Name lamp read lamp clo status

Description value known as "lamp" byte value known as

"read lamp clo status"

Response

Pos

0

Size

1

1 1

Name lamp read lamp clo status

2 1 status


"read lamp clo status" status

0x76

0x96

Content lamp (hex) read lamp clo status (hex)

0x76

0x96

Content lamp (hex) read lamp clo status (hex)

0x00



3. Commands

3.179 read lamp CLO target lumens, read


This command reads the lamp CLO (Constant Light Output) target lumens.

Request

Pos

0

1

Size

1

1

Name lamp read lamp clo value

Description value known as "lamp" read lamp clo value

Response

Pos Size

0

1

2-5

1

1

4

Name lamp read lamp clo value lumens

Description value known as "lamp" read lamp clo value lumens as DWORD

0x76

0x9e

Content lamp (hex) read lamp clo value (hex)

0x76

0x9e

Content lamp (hex) read lamp clo value (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)


3. Commands

3.180 read lamp runtime, read


This command reads the lamp runtime.

Request

Pos

0

1

Size

1

1

Name lamp read lamp runtime

Response

Pos Size

0

1

2-5

1

1

4

Name lamp read lamp runtime lamp runtime

Description value known as "lamp" read lamp runtime

Description value known as "lamp" read lamp runtime runtime in seconds as DWORD

0x76

0x90

Content lamp (hex) read lamp runtime (hex)

0x76

0x90

Content lamp (hex) read lamp runtime (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)


3. Commands

3.181 read language, read


This command reads the language selection.

Request

Pos

0

1

Size

1

1

Name projector info read language

Description byte value known as "projector info" byte value known as "read language"

Response

Pos

0

1

NA

Size Name

1

1 projector info read language

NA language

Description byte value known as "projector info" byte value known as "read language" language two-letter code as C-string

0xf5

0x04

Content projector info (hex) read language (hex)

0xf5

0x04

"en"

"fr"

"de"

"es"

"pt"

"nl"

"zh"

"ja"

"ko"

Content projector info (hex) read language (hex)

English (string)

French (string)

Deutch (string)

Spanish (string)

Portuguese (string)

Dutch (string)

Chinese (string)

Japanese (string)

Korean (string)


3. Commands

3.182 read menu position, read


This command reads the menu position.

Request

Pos

0

1

Size

1

1

Name projector info read menu position

Description byte value known as "projector info" byte value known as "read menu position"

Response

Pos Size

0

1

1

1

Name projector info read menu position

2 1 position

Description byte value known as "projector info" byte value known as "read menu position" position value

0xf5

0x03

Content projector info (hex) read menu position (hex)

0xf5

0x03

0x11

0x12

0x13

0x21

0x22

0x23

0x31

0x32

0x33

Content projector info (hex) read menu position (hex)

Top Left (hex)

Top Mid (hex)

Top Right (hex)

Mid Left (hex)

Mid Mid (hex)

Mid Right (hex)

Bottom Left (hex)

Bottom Mid (hex)

Bottom Right (hex)


3. Commands

3.183 read network configuration, read


This command reads the network configuration.

Request

Pos

0

1

Size

1

1

Name network read network configuration

Description value known as "network" read network configuration

Response

Pos

0

Size

1

1 1

2 1

Name network read network configuration mode

Description value known as "network" read network configuration address assignment mode

3-6 4 IP address

7-10 4 subnet mask

11-14 4 default gateway

15-20 6 MAC address

0x11

0x01

Content network (hex) read network configuration

(hex)

0x11

0x01

0x00

0x01

Content network (hex) read network configuration

(hex) manual (hex)

DHCP (hex) first octet (hex) second octet (hex) third octet (hex) fourth octet (hex) first octet (hex) second octet (hex) third octet (hex) fourth octet (hex) first octet (hex) second octet (hex) third octet (hex) fourth octet (hex) first octet (hex) second octet (hex) third octet (hex) fourth octet (hex) fifth octet (hex) sixth octet (hex)


3. Commands

3.184 read panel size, read


This command reads the DMD panel size.

Request

Pos

0

1

Size

1

1

Name

Response

Pos Size

0

1

2-3

1

1

2 X-value

Name

Description

Description

X-value as WORD

4-5 2 Y-value Y-value as WORD

Content

0xf0

0x01

Content

0xf0

0x01

MSB (hex)

LSB (hex)

MSB (hex)

LSB (hex)


3. Commands

3.185 read projector runtime, read


This command reads the projector runtime in seconds.

Request

Pos

0

Size

1

Name read projector rt


"read projector runtime"

Response

Pos

0

Size

1

Name read projector rt

1-4 4


"read projector runtime" runtime in seconds as DWORD

0x62

Content read projector rt (hex)

0x62

Content read projector rt (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)


3. Commands

3.186 read projector serial number, read


This command reads the projector serial number.

Request

Pos

0

Size

1

Name read projector sn

Description byte value known as "read projector sn" 0x61

Response

Pos

0

NA

Size

1

Name read projector sn

NA serial number

Description byte value known as "read projector sn" 0x61 serial number as a Pascal language string

Content read projector sn (hex)

Content read projector sn (hex) serial number (string)


3. Commands

3.187 read projector status, read


This command reads the projector status.

Request

Pos

0

Size

1


1 1 projector status mask


"read projector status" optional: status mask in order to get only the info of interest.

0x67

Content read projector status (hex) bit 7 reserved (bit) bit 6 lamp on (bit) bit 5 reserved (bit) bit 4 reserved (bit) bit 3 reserved (bit) bit 2 reserved (bit) bit 1 text on (bit) bit 0 projector on (bit)

Response

Pos

0

Size

1


1 1 projector status


"read projector status"

The return data consists of one data byte containing the projector status.

0x67

Content read projector status (hex) bit 7 reserved (bit) bit 6 lamp on (bit) bit 5 reserved (bit) bit 4 reserved (bit) bit 3 reserved (bit) bit 2 reserved (bit) bit 1 text on (bit) bit 0 projector on (bit)


3. Commands

3.188 read wifi configuration, read


This command reads the wifi configuration.

Request

Pos

0

1

Size

1

1

Name network read wifi configuration

Description value known as "network" read wifi configuration

Response

Pos Size

0

1

2

1

1

1

Name network read wifi configuration mode

Description value known as "network" read wifi configuration address assignment mode

3-6 4 IP address

7-10 4 subnet mask


15-20 6 MAC address

0x11

0x06

Content network (hex) read wifi configuration (hex)

0x11

0x06

0x00

0x01

Content network (hex) read wifi configuration (hex) manual (hex)



3. Commands

3.189 read wifi key Mgmt, read


This command reads the wifi key Mgmt.

Request

Pos

0

1

Size

1

1

Name network read wifi key Mgmt

Description value known as "network" read wifi key Mgmt

Response

Pos Size

0

1

2

1

1

1

Name network read wifi key Mgmt security mode

NA NA PSK

About datafield 5 (PSK)

Only applicable if security mode is activated.

Description value known as "network" read wifi key Mgmt security mode

WPA/WPA2 (auto detected)

PSK (Pre Shared Key)

TKIP/EAS (auto detected)

PSK as C-string

0x11

0x08

Content network (hex) read wifi key Mgmt (hex)

0x11

0x08

0x00

0x01

Content network (hex) read wifi key Mgmt (hex) no encryption (hex)

WPA/WPA2 (hex)

PSK (string)


3. Commands

3.190 read wifi scan, read


This command reads the wifi scan result.

Request

Pos

0

1

Size

1

1

Name network read wifi scan

Description value known as "network" read wifi scan

Response

Pos Size

0

1

NA

Name

1

1 network read wifi scan

NA scan result

Description value known as "network" read wifi scan list of Access Points

About datafield 4 (scan result)

<?xml version="1.0"?>

<scan>

<status>

<bssid>00:11:e0:03:00:01</bssid>

<ssid>DPSYS</ssid>

<id>0</id>

<pairwise_cipher>CCMP</pairwise_cipher>

<group_cipher>TKIP</group_cipher>

<key_mgmt>WPA2-PSK</key_mgmt>

<wpa_state>COMPLETED</wpa_state>

<ip_address>192.168.0.196</ip_address>

</status>

<accesspoints>

<accesspoint bssid="a4:18:75:78:ab:5e">

<freq>5280</freq>

<beacon_int>0</beacon_int>

<capabilities>0x0001</capabilities>

<qual>42</qual>

<noise>178</noise>

<level>183</level>

<tsf>0000000000000000</tsf>

<ie>000b426172636f204775657374010158</ie>

<flags></flags>

<ssid>Barco Guest</ssid>

</accesspoint>

</accesspoints>

</scan>

0x11

0x09

Content network (hex) read wifi scan (hex)

0x11

0x09

Content network (hex) read wifi scan (hex) scan result (xml)


3. Commands

3.191 read wifi SSID, read


This command reads the wifi SSID of the AP (Access Point) to connect to.

The projector itself is not an AP.

Request

Pos

0

1

Size

1

1

Name network read wifi SSID

Description value known as "network" read wifi SSID

Response

Pos

0

Size

1

1

NA

Name network

1 read wifi SSID

NA SSID

Description value known as "network" read wifi SSID

SSID as a C-string

0x11

0x07

Content network (hex) read SSID (hex)

0x11

0x07

Content network (hex) read SSID (hex)

SSID (string)


3. Commands

3.192 read wifi status, read


This command reads the wifi status.

Request

Pos

0

1

Size

1

1

Name network read wifi status

Description value known as "network" read wifi status

Response

Pos Size

0

1

1

1

2 1

Name network read wifi status status

Description value known as "network" read wifi status status

On = infrastructure mode

About datafield 4 (status)

"Infrastructure" mode, meaning no ad hoc/point to point connection supported

0x11

0x0a

Content network (hex) read wifi status (hex)

0x11

0x0a

0x00

0x01

Content network (hex) read wifi status (hex) off (hex) on (hex)


3. Commands

3.193 RS interface selection , read


This command reads the RS interface selection.

Request

Pos

0

Size

1

Name

RS interface selection


"RS interface selection"

Response

Pos

0

Size

1

Name rs interface selection

1 1 selection

Description byte value known as "rs interface selection"


0x74

Content

RS interface selection (hex)

0x74

0x00

0x01

Content rs interface selection (hex)

RS485 (hex)

RS232 (hex)


3. Commands

3.194 RS interface selection , write


This command writes the RS interface selection.

Request

Pos

0

Size

1

Name


1 1 selection


"RS interface selection"


0x74

Content

RS interface selection (hex)

0x00

0x01

RS485 (hex)

RS232 (hex)


3. Commands

3.195 saturation possible, read


This command checks if saturation adjustment is possible.

Request

Pos

0

1

Size

1

1

Name adj possible adj saturation

Description value known as "adj possible" value known as "adj saturation"

Response

Pos Size

0

1

2

1

1

1

Name adj possible adj saturation possible

Description value known as "adj possible" value known as "adj saturation" adjustment is possible or not

0x29

0x03

Content adj possible (hex) saturation (hex)

0x29

0x03

0x00

0x01

Content adj possible (hex) saturation (hex) not possible (hex) possible (hex)


3. Commands

3.196 save current adjustments to a file, write


This command saves current adjustments to a file.

Valid from v1.6.

Request

Pos

0

1

2

NA

NA

NA

Size

1 set adj

Name Description byte value known as "set adj"

1 adj warp byte value known as "adj warp"

1

NA

1

1 save current distortion file name byte value known as "save current distortion" active warp file name as C-string.

.txt extension will automaticaly be appended.

number of grid columns optional parameter to specify number of grid columns.

number of grid rows optional parameter to specify number of grid rows.

0x20

0xa1

0x81

Content set adj (hex) adj warp (hex) save current distortion (hex) file name (string) grid columns. Valid values are 2, 3, 5, 9, 17, 33 (hex) grid rows. Valid values are

2, 3, 5, 9, 17, 33 (hex)


3. Commands

3.197 save custom settings, write


This command saves the custom settings.

Request

Pos

0

1-4

Size

1

4 function part one

Name Description byte value known as "function"


"save custom settings part one"

5-8 4 part two DWORD value known as

"save custom settings part two"

0x82

0x00

0x00

0x00

0x4a

0x00

0x03

0x00

0x03


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.198 save image settings, write


This command saves the image settings to the corresponding file.

Request

Pos

0

1

Size

1

1

Name file save image settings


"save image settings to file"

0xbd

0x86

Content file (hex) save image settings (hex)


3. Commands

3.199 select main window as prefix, write


This command selects the main window as prefix for a window adjustment command.

prefix applicable for next commands:

- get/set output window commands

- select input slot.

Request

Pos

0

1

2

Size

1

1

1

Name window select window main window

Description byte value known as "window" byte value known as "select window" byte value known as "main window"

0x8f

0x88

0x00

Content window (hex) select window (hex) main window (hex)


3. Commands

3.200 select PIP window as prefix, write


This command selects the PIP window as prefix for a window adjustment command.

prefix applicable for next commands:

- get/set output window commands

- select input slot.

Request

Pos

0

1

2

Size

1

1

1

Name window select window

PIP window

Description byte value known as "window" byte value known as "select window" byte value known as "PIP window"

0x8f

0x88

0x01

Content window (hex) select window (hex)

PIP window (hex)


3. Commands

3.201 select source 1 as prefix, write


This command selects the source 1 as prefix for a source adjustment command.

Request

Pos

0

1

Size

1

1

Name set source input 1

Description byte value known as "set source" byte value known as "input 1"

0x31

0x01

Content set source (hex) input 1 (hex)


3. Commands




Request

Pos

0

1

Size

1

1



0x31

0x02



3. Commands




Request

Pos

0

1

Size

1

1



0x31

0x03



3. Commands




Request

Pos

0

1

Size

1

1



0x31

0x04



3. Commands

3.205 select window, write


This command selects the window for subsequent adjustments.

Request

Pos

0

1

2

Size

1

1

1

Name window select window selection

Description byte value known as "window" byte value known as "select window" window selection

0x8f

0x88

0x00

0x01

Content window (hex) select window (hex)

Main (hex)

PIP (hex)


3. Commands

3.206 set aspect ratio file, write


This command sets the aspect ratio file value.

Request

Pos

0

1

Size

1

1

Name set adj adj aspect ratio

2

NA

1 aspect ratio file

NA aspect ratio string

Description byte value known as "set adj" byte value known as


"aspect ratio file" aspect ratio as C-language string

0x20

0x0b

0xc0

About datafield 3 (aspect ratio string)

"4:3" or "16:9" or "5:4" or "2.35" or "1.88" or "1.85" or "1.78" or "16:10" or "1.67" or "Custom"

Content set adj (hex) adj aspect ratio (hex) aspect ratio file (hex) aspect ratio string (string)


3. Commands

3.207 set aspect ratio height, write


This command sets the aspect ratio height value.

Request

Pos

0

1

Size

1

1


2

3-6

1

4 aspect ratio height aspect ratio height



"aspect ratio height" aspect ratio height as DWORD

0x20

0x0b

Content set adj (hex) adj aspect ratio (hex)


MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)


3. Commands

3.208 set aspect ratio width, write


This command sets the aspect ratio width value.

Request

Pos

0

1

Size

1

1


2

3-6

1

4 aspect ratio width aspect ratio width



"aspect ratio width" aspect ratio width as DWORD

0x20

0x0b

Content set adj (hex) adj aspect ratio (hex)


MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)


3. Commands

3.209 set blanking bottom, write


This command sets the blanking bottom value.

Request

Pos

0

1

Size

1

1

Name set adj adj blanking bottom

2-3 2 value


"adj blanking bottom" blanking value expressed as WORD range depending on the native resolution of the projector.

0x20

0x4d

Content set adj (hex) adj blanking bottom (hex)

MSB (hex)

LSB (hex)


3. Commands

3.210 set blanking left, write


This command sets the blanking left value.

Request

Pos

0

1

2-3

Size

1

1

2

Name set adj adj blanking left value

Description byte value known as "set adj" byte value known as "adj blanking left" blanking value expressed as WORD range depending on the native resolution of the projector.

0x20

0x4e

Content set adj (hex) adj blanking left (hex)

MSB (hex)

LSB (hex)


3. Commands

3.211 set blanking right, write


This command sets the blanking right value.

Request

Pos

0

1

Size

1

1

Name set adj adj blanking right

2-3 2 value


"adj blanking right" blanking value expressed as WORD range depending on the native resolution of the projector.

0x20

0x4f

Content set adj (hex) adj blanking right (hex)

MSB (hex)

LSB (hex)


3. Commands

3.212 set blanking top , write


This command sets the blanking top value.

Request

Pos

0

1

2-3

Size

1

1

2

Name set adj adj blanking top value

Description byte value known as "set adj" 0x20 byte value known as "adj blanking top" 0x4c blanking value expressed as WORD range depending on the native resolution of the projector.

Content set adj (hex) adj blanking top (hex)

MSB (hex)

LSB (hex)


3. Commands

3.213 set brightness, write


This command sets the brightness value of the active source.

Request

Pos

0

1

2

Size

1

1

1

Name set adj adj brightness value

Description byte value known as "set adj" byte value known as "adj brightness" brightness value range 0->255

0x20

0x02

Content set adj (hex) adj brightness (hex) brightness value (hex)


3. Commands

3.214 set clamp delay , write


This command sets the clamp delay value of the active source.

Request

Pos

0

1

Size

1

1

2 1

Name set adj adj clamp delay value


"adj clamp delay" clamp delay value range 0->255

0x20

0x67

Content set adj (hex) adj clamp delay (hex) clamp delay value (hex)


3. Commands

3.215 set clamp width, write


This command sets the clamp width value of the active source.

Request

Pos

0

1

Size

1

1

2 1

Name set adj adj clamp width value


"adj clamp width" clamp width value range 0->255

0x20

0x68

Content set adj (hex) adj clamp width (hex) clamp width value (hex)


3. Commands

3.216 set color balance blue green ratio, write


This command sets the color balance blue green ratio of the active source.

Request

Pos

0

1

Size

1

1

2 1

Name set adj adj color balance blue green blue green ratio


"adj color balance blue green" color balance blue green ratio multiplied by 100 range 0 -> 200

0x20

0x44

Content set adj (hex) adj color balance BG (hex) blue green ratio (hex)


3. Commands

3.217 set color balance red green ratio, write


This command sets the color balance red green ratio of the active source.

Request

Pos

0

1

Size

1

1

2 1

Name set adj adj color balance red green red green ratio


"adj color balance red green" color balance red green ratio multiplied by 100 range 0 -> 200

0x20

0x43

Content set adj (hex) adj color balance RG (hex) red green ratio (hex)


3. Commands

3.218 set color temperature, write


This command sets the color temperature of the active source.

Request

Pos

0

1

NA

Size

1

1 set adj

Name adj color temperature

NA color temperature

Description byte value known as "set adj" wanted color temperature expressed as byte or C-String

0x20

0x45

0x00

0x01

0x32

0x54

0x65

0x93

Content set adj (hex) custom (hex) projector-white (hex)

3200 K (hex)

5400 K (hex)

6500 K (hex)

9300 K (hex) color temperature (string)

About datafield 2 (color temperature) possible color temperature strings are:

"custom"

"projector-white"

"3200"

"5400"

"6500"

"9300"


3. Commands

3.219 set contrast, write


This command sets the contrast value of the active source.

Request

Pos

0

1

2

Size

1

1

1

Name set adj adj contrast contrast value

Description byte value known as "set adj" byte value known as "adj contrast" range 0->100

0x20

0x01

Content set adj (hex) adj contrast (hex) contrast value (hex)


3. Commands

3.220 set contrast enhancement, write


This command sets the contrast enhancement value.

Request

Pos

0

1

2

Size

1

1

1

Name set adj adj contrast enh value


"adj contrast enhancement" contrast enhancement value

3-6 4 contrast plate position for mid contrast or undetermined; contrast plate position as DWORD range 0x0000..0xffff

0x20

0x86

Content set adj (hex) adj contrast enh (hex)

0x00

0x01

0x02 low contrast (hex) high contrast (hex) mid contrast or undetermined (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)


3. Commands

3.221 set dimming, write


This command sets the dimming value.

Request

Pos

0

1

2

Size

1

1

1

Name set adj adj dimming value

Description byte value known as "set adj" byte value known as "adj dimming" dimming value range 255 -> 0 the higher the value the brighter the light output

0x20

0x0d

Content set adj (hex) adj dimming (hex) dimming value (hex)


3. Commands

3.222 set gamma, write


This command sets the gamma value.

Request

Pos

0

1

2

Size

1

1

1

Name set adj adj gamma value

Description byte value known as "set adj" byte value known as "adj gamma" gamma value range 0->7

0x20

0x70

Content set adj (hex) adj gamma (hex) gamma value (hex)


3. Commands

3.223 set input black balance, write


This command sets the input black balance value of the active source.


Request

Pos

0

1

Size

1

1

Name set adj adj input black balance

2 1 color


"adj input black balance" color specification


0x20

0x6e

Content set adj (hex) adj inp black bal (hex)

0x00

0x01

0x02 red (hex) green (hex) blue (hex) balance (hex)


3. Commands

3.224 set input white balance, write


This command sets the input white balance value of the active source.


Request

Pos

0

1

Size

1

1

Name set adj adj input white balance

2 1 color

Description byte value known as "set adj" byte value known as "adj input white balance" color specification


0x20

0x6f

0x00

0x01

0x02

Content set adj (hex) adj inp white bal (hex) red (hex) green (hex) blue (hex) balance (hex)


3. Commands

3.225 set intensity, write


This command sets the intensity value.

Request

Pos

0

1

2

Size

1

1

1

Name set adj adj intensity value

Description byte value known as "set adj" byte value known as "adj intensity" intensity value range 0->255

0x20

0xa4

Content set adj (hex) adj intensity (hex) intensity value (hex)


3. Commands

3.226 set lamp status, write


This command sets the status of the lamp, on or off.

Request

Pos

0

1

Size

1

1

Name lamp write lamp status

2 1 lamp status value


"write lamp status" lamp status value

0x76

0x1a

Content lamp (hex) write lamp status (hex)

0x00



3. Commands

3.227 set layout , write


This command sets the layout.

Request

Pos

0

1

NA

Size

1

1 set adj adj layout

Name

NA layout file name

Description byte value known as "set adj" byte value known as "adj layout" layout file name as C-string

0x20

0x90

Content set adj (hex) adj layout (hex) layout file name (string)


3. Commands

3.228 set lcd backlight level, write


This command sets the lcd backlight level.

Request

Pos

0

1

2

Size

1

1

1

Name set adj lcd blacklight level level

Description byte value known as "set adj" 0x20 byte value known as "lcd backlight level" 0xa5 backlight level range 0->255

Content set adj (hex) lcd backlight level (hex) level (hex)


3. Commands

3.229 set lcd time out, write


This command sets the lcd time out value.

Request

Pos

0

1

2

Size

1

1

1

Name set adj adj lcd time out value

Description byte value known as "set adj" byte value known as "adj lcd time out" lcd time out value in seconds range 0->255

0x20

0xa3

Content set adj (hex) adj lcd time out (hex) lcd time out value (hex)


3. Commands

3.230 set lens focus, write


This command sets the lens focus.

Request

Pos

0

1

Size

1

1

Name lens write focus

2 1 direction

Description byte value known as "lens" byte value known as

"write focus" direction

0xf4

0x83

Content lens (hex) write focus (hex)

0x00

0x01 near (hex) far (hex)


3. Commands

3.231 set lens shift, write


This command sets the lens shift.

Request

Pos

0

1

Size

1

1 lens write shift

Name

2 1 direction


"write shift" direction

0xf4

0x81

Content lens (hex) write shift (hex)

0x00

0x01

0x02

0x03 up (hex) down (hex) left (hex) right (hex)


3. Commands

3.232 set lens zoom, write


This command sets the lens zoom.

Request

Pos

0

1

Size

1

1

Name lens write zoom

2 1 direction


"write zoom" direction

0xf4

0x82

Content lens (hex) write zoom (hex)

0x00

0x01 in (hex) out (hex)


3. Commands

3.233 set lock, write


This command sets the lock mode.

Request

Pos

0

1

2

Size

1

1

1 set adj adj lock

Name lock mode

3-6 4 vertical refresh rate byte value known as "set adj" byte value known as "adj lock" lock mode

Description

In case of manual locking, the vertical refresh rate can also be specified as

DWORD and represented in 1/10000

Hz. (e.g. 00 09 22 20 = 598560 =

59,856Hz)

0x20

0x99

0x00

0x01

0x02

0x03

0x04

0xfd

0xfe

0xff

Content set adj (hex) adj lock (hex)

Free run at 60Hz (hex)




Lock to input 4 (hex) manual lock (hex) lock to PIP (hex) lock to Main window (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)


3. Commands

3.234 set no signal color logo, write


This command sets the blanking color value and logo status, used when no signal is connected.

Request

Pos

0

1

2

Size

1

1

1

3

4

5

1

1

1

Name set adj adj no signal color value red value green value blue value

Description byte value known as "set adj" 0x20 byte value known as "adj no signal color" 0x7b no signal logo status 0x00

0x01 red value range 0->255 green value range 0->255 blue value range 0->255

Content set adj (hex) adj no signal color (hex) off (hex) on (hex) red value (hex) green value (hex) blue value (hex)


3. Commands

3.235 set no signal shutdown delay, write


This command sets the no signal shutdown delay, expressed in number of seconds.

Request

Pos

0

1

Size

1

1

2

3-6

1

4

Name set adj adj no signal shutdown delay delay value

Description byte value known as "set adj" byte value known as "adj no signal shutdown" byte value known as

"no signal shutdown delay" delay in number of seconds as DWORD

0x20

0x9a

0x02

Content set adj (hex) adj no signal shutdown (hex) delay (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)


3. Commands

3.236 set no signal shutdown status, write


This command sets the no signal shutdown status. "Enabled" or "Disabled".

Request

Pos

0

1

Size

1

1

2

3

1

1

Name set adj adj no signal shutdown status value



"no signal shutdown status" status value

0x20

0x9a

Content set adj (hex) adj no signal shutdown (hex)

0x01 status (hex)

0x00

0x01

Disabled (hex)

Enabled (hex)


3. Commands

3.237 set output window in native resolution, write


This command sets the output window in native resolution of the input signal.

Request

Pos

0

1

Size

1

1

2

3

1

1

Name set adj output window native resolution value


"adj output window" native resolution value as WORD in big endian (MSB

LSB)

0x20

0x8d

Content set adj (hex) adj window (hex)

0x16

0

1 native resolution (hex)

Off (dec)

On (dec)


3. Commands

3.238 set output window parameters, write


This command sets the output window parameters.

Request

Pos

0

1

Size

1

1

Name set adj adj output window

2 1 from index


"adj output window" from index specification as BYTE 0

2

4

6

0x20

0x8d


X-Offset (dec)

Y-Offset (dec)

Width (dec)

Height (dec)

MSB (hex)

LSB (hex)

3 1 window parameter window parameter

About datafield 3 (window parameter)

- all window parameters are expressed as WORD in big endian (MSB LSB)

- the minimum number of parameters is 1

- the maximum number of parameters depends on the specified from index

0 => max 4

2 => max 3

4 => max 2

6 => max 1


3. Commands

3.239 set output window status, write


This command sets the output window status.

Request

Pos

0

1

Size

1

1

Name set adj output window

2

3

1

1 status value


"adj output window" status value as WORD in big endian (MSB

LSB)

0x20

0x8d


0x40

0

1 status (hex)

Off (dec)

On (dec)


3. Commands

3.240 set P7 TCGD blue X, write


This command sets the P7 TCGD blue X value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name set adj adj P7

P7 TCGD

P7 TCGD blue X

4-5 2 value

Description byte value known as "set adj" byte value known as "adj P7" byte value known as "P7 TCGD" byte value known as

"P7 TCGD blue X"

P7 TCGD blue X value as WORD



0x20

0x97

0x00

0x07

Content set adj (hex) adj P7 (hex)

P7 TCGD (hex)


MSB (hex)

LSB (hex)


3. Commands

3.241 set P7 TCGD blue Y, write


This command sets the P7 TCGD blue Y value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name set adj adj P7

P7 TCGD

P7 TCGD blue Y

4-5 2 value


"P7 TCGD blue Y"

P7 TCGD blue Y value as WORD



0x20

0x97

0x00

0x08


P7 TCGD (hex)


MSB (hex)

LSB (hex)


3. Commands

3.242 set P7 TCGD cyan X, write


This command sets the P7 TCGD cyan X value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name set adj adj P7

P7 TCGD

P7 TCGD cyan X

4-5 2 value


"P7 TCGD cyan X"

P7 TCGD cyan X value as WORD

0x20

0x97

0x00

0x0d


P7 TCGD (hex)


MSB (hex)

LSB (hex)




3. Commands

3.243 set P7 TCGD cyan Y, write


This command sets the P7 TCGD cyan Y value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name set adj adj P7

P7 TCGD

P7 TCGD cyan Y

4-5 2 value


"P7 TCGD cyan Y"

P7 TCGD cyan Y value as WORD

0x20

0x97

0x00

0x0e


P7 TCGD (hex)


MSB (hex)

LSB (hex)




3. Commands

3.244 set P7 TCGD green X, write


This command sets the P7 TCGD green X value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name set adj adj P7

P7 TCGD

P7 TCGD green X

4-5 2 value


"P7 TCGD green X"

P7 TCGD green X value as WORD

0x20

0x97

0x00

0x04


P7 TCGD (hex)

P7 TCGD green X (hex)

MSB (hex)

LSB (hex)




3. Commands

3.245 set P7 TCGD green Y, write


This command sets the P7 TCGD green Y value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name set adj adj P7

P7 TCGD

P7 TCGD green Y

4-5 2 value


"P7 TCGD green Y"

P7 TCGD green Y value as WORD

0x20

0x97

0x00

0x05


P7 TCGD (hex)


MSB (hex)

LSB (hex)




3. Commands

3.246 set P7 TCGD magenta X, write


This command sets the P7 TCGD magenta X value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name set adj adj P7

P7 TCGD

P7 TCGD magenta X

4-5 2 value


"P7 TCGD magenta X"

P7 TCGD magenta X value as WORD

0x20

0x97

0x00

0x0a


P7 TCGD (hex)


MSB (hex)

LSB (hex)




3. Commands

3.247 set P7 TCGD magenta Y, write


This command sets the P7 TCGD magenta Y value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name set adj adj P7

P7 TCGD

P7 TCGD magenta Y

4-5 2 value


"P7 TCGD magenta Y"

P7 TCGD magenta Y value as WORD

0x20

0x97

0x00

0x0b


P7 TCGD (hex)


MSB (hex)

LSB (hex)




3. Commands

3.248 set P7 TCGD red X , write


This command sets the P7 TCGD red X value.

Request

Pos

2

3

0

1

4-5

1

1

2

Size

1

1

Name set adj adj P7

P7 TCGD

P7 TCGD red X value

Description byte value known as "set adj" byte value known as "adj P7"

0x20


P7 TCGD Red X value as WORD


P7 TCGD (hex)

P7 TCGD red X (hex)

MSB (hex)

LSB (hex)




3. Commands

3.249 set P7 TCGD red Y, write


This command sets the P7 TCGD red Y value.

Request

Pos

2

3

0

1

4-5

1

1

2

Size

1

1

Name set adj adj P7

P7 TCGD

P7 TCGD red Y value

Description byte value known as "set adj" byte value known as "adj P7"

0x20


P7 TCGD Red Y value as WORD


P7 TCGD (hex)

P7 TCGD red Y (hex)

MSB (hex)

LSB (hex)




3. Commands

3.250 set P7 TCGD selection, write


This command sets the P7 TCGD selection.

Request

Pos

2

3

0

1

NA

Size

1

1 set adj adj P7

Name

1

1

P7 TCGD

P7 TCGD all

NA file name

Description byte value known as "set adj" byte value known as "adj P7" byte value known as "P7 TCGD" byte value known as "P7 TCGD all" name of file with the wanted

P7 TCGD values.

name as C-string

0x20

0x97

0x00

0x00


P7 TCGD (hex) all (hex) file name (string)


3. Commands

3.251 set P7 TCGD white X, write


This command sets the P7 TCGD white X value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name set adj adj P7

P7 TCGD

P7 TCGD white X

4-5 2 value


"P7 TCGD white X"

P7 TCGD white X value as WORD

0x20

0x97

0x00

0x13


P7 TCGD (hex)


MSB (hex)

LSB (hex)


3. Commands

3.252 set P7 TCGD white Y, write


This command sets the P7 TCGD white Y value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name set adj adj P7

P7 TCGD

P7 TCGD white Y

4-5 2 value


"P7 TCGD white Y"

P7 TCGD white Y value as WORD

0x20

0x97

0x00

0x14


P7 TCGD (hex)


MSB (hex)

LSB (hex)




3. Commands

3.253 set P7 TCGD yellow X, write


This command sets the P7 TCGD yellow X value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name set adj adj P7

P7 TCGD

P7 TCGD yellow X

4-5 2 value


"P7 TCGD yellow X"

P7 TCGD yellow X value as WORD

0x20

0x97

0x00

0x10


P7 TCGD (hex)


MSB (hex)

LSB (hex)




3. Commands

3.254 set P7 TCGD yellow Y, write


This command sets the P7 TCGD yellow Y value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name set adj adj P7

P7 TCGD

P7 TCGD yellow Y

4-5 2 value


"P7 TCGD yellow Y"

P7 TCGD yellow Y value as WORD

0x20

0x97

0x00

0x11


P7 TCGD (hex)


MSB (hex)

LSB (hex)




3. Commands

3.255 set phase, write


This command sets the phase value of the active source.

Request

Pos

0

1

2

Size

1

1

1 set adj adj phase value

Name Description byte value known as "set adj" byte value known as "adj phase" phase value range 0->63

0x20

0x06

Content set adj (hex) adj phase (hex) phase value (hex)


3. Commands

3.256 set same lens settings status, write


This command sets the same lens settings status.

Request

Pos

0

1

Size

1

1

Name set adj adj same lens settings

2 1 status


"adj same lens settings" same lens settings status

0x20

0xa2

Content set adj (hex) adj same lens settings (hex)

0x00

0x01 layout specific (hex) same for all layouts (hex)


3. Commands

3.257 set saturation, write


This command sets the saturation value of the active source.

Request

Pos

0

1

2

Size

1

1

1

Name set adj adj saturation value

Description byte value known as "set adj" byte value known as "adj saturation" saturation value range 0->255

0x20

0x03

Content set adj (hex) adj saturation (hex) saturation value (hex)


3. Commands

3.258 set scan/orientation configuration, write


This command sets the scan/orientation configuration.

Request

Pos

0

1

2

Size

1

1

1

Name set adj adj scan orientation

Description byte value known as "set adj" byte value known as "adj scan" orientation

0x20

0x24

0x40

0x80

0x00

0xc0

0x01

0x02

Content set adj (hex) adj scan (hex)

Front-Table (hex)

Front-Ceiling (hex)

Rear-Table (hex)

Rear-Ceiling (hex)

Auto-Front (hex)

Auto-Rear (hex)


3. Commands

3.259 set sharpness, write


This command sets the sharpness value of the active source.

Request

Pos

0

1

2

Size

1

1

1

Name set adj adj sharpness value

Description byte value known as "set adj" byte value known as "adj sharpness" sharpness value range 0->31

0x20

0x05

Content set adj (hex) adj sharpness (hex) sharpness value (hex)


3. Commands

3.260 set shutter position, write


This command opens or closes the shutter of the projector.

Request

Pos

0

1

2

Size

1

1

1

Name set adj adj shutter shutter position

Description byte value known as "set adj" byte value known as "adj shutter" shutter position

0x20

0x42

0x00

0x01

Content set adj (hex) adj shutter (hex) close (hex) open (hex)


3. Commands

3.261 set soft edge black level, write


This command sets the soft edge black level value.

Request

Pos

0

1

Size

1

1

2

3

1

1

Name Description set adj byte value known as "set adj" adj soft edge black level byte value known as "adj soft edge black level" color color

0x20

0x84

0x00

0x01

0x02 value soft edge black level value range 0->255

Content set adj (hex) adj soft edge black level

(hex) red (hex) green (hex) blue (hex) black level value (hex)


3. Commands

3.262 set soft edge size black level bottom, write


This command sets the soft edge size black level bottom value.

Request

Pos

0

1

Size

1

1

2

3-4

1

2 set adj

Name adj soft edge size soft edge size black level bottom soft edge size black level bottom



"soft edge size black level bottom" soft edge size black level bottom as WORD range depending on the native resolution of the projector.

0x20

0x83

0x05

Content set adj (hex) adj soft edge size (hex) soft edge size black level bottom (hex)

MSB (hex)

LSB (hex)


3. Commands

3.263 set soft edge size black level left, write


This command sets the soft edge size black level left value.

Request

Pos

0

1

Size

1

1

2

3-4

1

2 set adj

Name adj soft edge size soft edge size black level left soft edge size black level left



"soft edge size black level left" soft edge size black level left as WORD range depending on the native resolution of the projector.

0x20

0x83

0x06

Content set adj (hex) adj soft edge size (hex) soft edge size black level left

(hex)

MSB (hex)

LSB (hex)


3. Commands

3.264 set soft edge size black level right, write


This command sets the soft edge size black level right value.

Request

Pos

0

1

Size

1

1

2

3-4

1

2 set adj

Name adj soft edge size soft edge size black level right soft edge size black level right



"soft edge size black level right" soft edge size black level right as WORD range depending on the native resolution of the projector.

0x20

0x83

0x07

Content set adj (hex) adj soft edge size (hex) soft edge size black level right (hex)

MSB (hex)

LSB (hex)


3. Commands

3.265 set soft edge size black level top, write


This command sets the soft edge size black level top value.

Request

Pos

0

1

Size

1

1

2

3-4

1

2 set adj

Name adj soft edge size soft edge size black level top soft edge size black level top



"soft edge size black level top" soft edge size black level top as WORD range depending on the native resolution of the projector.

0x20

0x83

0x04

Content set adj (hex) adj soft edge size (hex) soft edge size black level top

(hex)

MSB (hex)

LSB (hex)


3. Commands

3.266 set soft edge size bottom, write


This command sets the soft edge size bottom value.

Request

Pos

0

1

Size

1

1

Name set adj adj soft edge size

2

3-4

1

2 soft edge size bottom soft edge size bottom



"soft edge size bottom" soft edge size bottom as WORD range depending on the native resolution of the projector.

0x20

0x83

0x01

Content set adj (hex) adj soft edge size (hex) soft edge size bottom (hex)

MSB (hex)

LSB (hex)


3. Commands

3.267 set soft edge size left, write


This command sets the soft edge size left value.

Request

Pos

0

1

Size

1

1


2

3-4

1

2 soft edge size left soft edge size left



"soft edge size left" soft edge size left as WORD range depending on the native resolution of the projector.

0x20

0x83

0x02

Content set adj (hex) adj soft edge size (hex) soft edge size left (hex)

MSB (hex)

LSB (hex)


3. Commands

3.268 set soft edge size right , write


This command sets the soft edge size right value.

Request

Pos

0

1

Size

1

1


2

3-4

1

2 soft edge size right soft edge size right



"soft edge size right" soft edge size right as WORD range depending on the native resolution of the projector.

0x20

0x83

0x03

Content set adj (hex) adj soft edge size (hex) soft edge size right (hex)

MSB (hex)

LSB (hex)


3. Commands

3.269 set soft edge size top , write


This command sets the soft edge size top value.

Request

Pos

0

1

Size

1

1


2

3-4

1

2 soft edge size top soft edge size top



"soft edge size top" soft edge size top as WORD range depending on the native resolution of the projector.

0x20

0x83

0x00

Content set adj (hex) adj soft edge size (hex) soft edge size top (hex)

MSB (hex)

LSB (hex)


3. Commands

3.270 set soft edge status, write


This command sets the soft edge status.

Request

Pos

0

1

Size

1

1

Name set adj adj soft edge status

2 1 status

Description byte value known as "set adj" byte value known as "adj soft edge status" soft edge status bit 0 = soft edge/scenergix enabled bit 1 = white level alignment lines enabled bit 2 = black level alignment lines enabled bit 3 = data doubling enabled

0x20

0x82

Content set adj (hex) adj soft edge status (hex) soft edge status (hex)


3. Commands

3.271 set source , write


This command sets the source selection for the active window.

Request

Pos

0

1

Size

1

1

Name set source source selection

Description set source selection source selection

0x31

0x01

0x02

0x03

0x04

Content set source (hex) input 1 (hex) input 2 (hex) input 3 (hex) input 4 (hex)


3. Commands

3.272 set source extended, write


This command sets the source extended data without changing the source selection.

For source selection, use the command: "set source, write".

Request

Pos

0

1

Size

1

1

Name set source input module indication

Description set source extended input module indication

0x33

0x01

0x02

0x03

0x04

Content set source extended (hex) input 1 (hex) input 2 (hex) input 3 (hex) input 4 (hex) module mode (hex) 2

3

4

5

1

1

1

1 mode configuration part one configuration part two configuration part three module mode depends on module type optional and only for SDI module optional and only for SDI module optional and only for SDI module configuration part one (hex) configuration part two (hex) configuration part three (hex)

292

About datafield 2 (mode) module modes

DVI/RGB analog

0x00 = dvi mode

0x01 = rgb analog hs-vs/cs

0x02 = yuv analog hs-vs/cs

0x03 = dual link DVI

0x04 = auto

SDI



0x02 = Input 1 priority over input 2 (SD, HD or 3G)

0x03 = Input 2 priority over input1 (SD, HD or 3G)

0x04 = DUAL HDSDI (uses both inputs)

0x05 = 2xHD (3D only - uses both inputs)

HDMI / DP

0x00 = HDMI

0x01 = Display Port

5-Cable:

0x00 = RGB HS/VS

0x01 = RGB CV: RGB with composite video on HS BNC

0x02 = RGB SOG: RGB with composite sync on G (G/Y/VIDEO BNC)

0x03 = YUV HS/VS

0x04 = YUV CV: YUV with composite video on HS BNC

0x05 = YUV SOY: RGB with composite sync on Y (G/Y/VIDEO BNC)

0x06 = CVBS: composite video on G/Y/VIDEO BNC

0x07 = S-VIDEO: separate video with Y on G/Y/VIDEO BNC and Cr on V/Cr BNC

Auto configuration is provided via the next modes:

0x08 = RGB AUTO: to do auto configuration between modes 0, 1 and 2

0x09 = YUV AUTO: to do auto configuration between modes 3, 4 and 5


0x0a = CVBS/S-VIDEO AUTO: to do auto configuration between modes 6 and 7

About datafield 3 (configuration part one) module configurations 1

SDI

0x00 = 4:2:2 YCbCr 10b

0x01 = 4:4:4 YCbCr 10b

0x02 = 4:4:4 RGB 10b

0x03 = 4:4:4 YCbCr 12b

0x04 = 4:4:4 RGB 12b

0x05 = 4:2:2 YCbCr 12b

DVI

0x00 = AUTO RGB (if mode is AUTO use RGB for analog sources)

0x01 = AUTO YUV (if mode is AUTO use YUV for analog sources)

About datafield 4 (configuration part two) module configurations 2

SDI

0x00 = Dual: Normal

0x01 = Dual: Swap links

About datafield 5 (configuration part three) module configurations 3

SDI

0x00 = 3G: Dual HD

0x01 = 3G: Direct mapping

0x02 = 3G-B: 2xHD (3D-only)

3. Commands


3. Commands

3.273 set test pattern by name, write


This command sets the specified test pattern.

Request

Pos

0

1

Size

1

1

Name test pattern test pattern by name

NA NA pattern name

Description byte value known as "test pattern" byte value known as

"test pattern by name" pattern name as a C-language string

To exit the pattern, use an empty

C-language string.

About datafield 2 (pattern name) valid test pattern names are:

"checkerboard"

"color bars"

"focus"

"full screen black"

"full screen blue"

"full screen green"

"full screen red"

"full screen white"

"hatch"

"outline"

"scenergix"

"convergence"

""

0x41

0xc0

Content test pattern (hex) test pattern by name (hex) pattern name (string)


3. Commands

3.274 set test pattern convergence, write


This command sets the convergence test pattern.

Request

Pos

0

1

Size

1

1

Name test pattern

Description byte value known as "test pattern" test pattern convergence byte value known as

"test pattern convergence"

0x41

0x21

Content test pattern (hex) test pattern convergence

(hex)


3. Commands

3.275 set test pattern convergence green blue, write


This command sets the convergence test pattern with green blue.

Request

Pos

0

1

Size

1

1

2 1

Name test pattern

Description byte value known as "test pattern" test pattern convergence byte value known as

"test pattern convergence" convergence green blue byte value known as

"convergence green blue"

0x41

0x21

0x07


(hex) convergence green blue

(hex)


3. Commands

3.276 set test pattern convergence red blue, write


This command sets the convergence test pattern with red blue.

Request

Pos

0

1

Size

1

1

2 1

Name test pattern

Description byte value known as "test pattern" test pattern convergence byte value known as convergence red blue

"test pattern convergence" byte value known as

"convergence red blue"

0x41

0x21

0x08


(hex) convergence red blue (hex)


3. Commands

3.277 set test pattern convergence red green blue, write


This command sets the convergence test pattern with red green blue.

Request

Pos

0

1

Size

1

1

2 1

Name test pattern

Description byte value known as "test pattern" test pattern convergence byte value known as convergence red green blue

"test pattern convergence" byte value known as

"convergence red green blue"

0x41

0x21

0x20


(hex) convergence red green blue

(hex)


3. Commands

3.278 set tint, write


This command sets the tint value of the active source.

Request

Pos

0

1

2

Size

1

1

1 set adj adj tint value

Name Description byte value known as "set adj" byte value known as "adj tint" tint value range 0->128

0x20

0x04

Content set adj (hex) adj tint (hex) tint value (hex)


3. Commands

3.279 set warp axis position, write


This command sets the warp axis position. This is the center used for the rotation command. Valid from v1.6.

Request

Pos

0

1

2

3-6

Size

1

1

1

4

Name set adj adj warp warp axis position axis position X value

Description byte value known as "set adj" byte value known as "adj warp"

0x20

0xa1 byte value known as "warp axis position" 0x30

X value as float (IEE-754 4bytes)

7-10 4 axis position Y value Y value as float (IEE-754 4bytes)

Content set adj (hex) adj warp (hex) warp axis position (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.280 set warp file, write


This command sets the wanted warp file.

Request

Pos

0

1

2

NA

Size

1

1 set adj adj warp

1 warp file

NA file name

Name Description byte value known as "set adj" byte value known as "adj warp" byte value known as "warp file" warp file name as C-string

0x20

0xa1

0x80

Content set adj (hex) adj warp (hex) warp file (hex) file name (string)


3. Commands

3.281 set warp grid size, write


This command sets the warp grid size value.

Request

Pos

2

3

0

1

Size

1

1

1

1

4 1 set adj adj warp

Name Description byte value known as "set adj" byte value known as "adj warp" warp grid size byte value known as "warp grid size" ver number of grid lines vertical numbers of grid lines only 2, 3, 5, 9, 17 and 33 are valid numbers hor number of grid lines horizontal number of grid lines only 2, 3, 5, 9, 17 and 33 are valid numbers

0x20

0xa1

0x18

Content set adj (hex) adj warp (hex) warp grid size (hex) ver number of grid lines

(hex) hor number of grid lines

(hex)


3. Commands

3.282 set warp hierarchic keystone in X direction, write


This command sets the hierarchic warp keystone value in X direction.

Valid from v1.6.

Request

Pos

0

1

2

Size

1

1

1

3 1

Name set adj adj warp warp hierarchic keystone in X direction warp area

Description byte value known as "set adj" byte value known as "adj warp" byte value known as "warp hierarchic keystone in X direction" warp area.



0x20

0xa1

0x53

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07

0x08

4-7 4 keystone in X direction keystone in X direction value as float

(IEE-754 4bytes)

Content set adj (hex) adj warp (hex) warp hierarchic keystone in


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.283 set warp hierarchic keystone in Y direction, write


This command sets the hierarchic warp keystone value in Y direction.

Valid from v1.6.

Request

Pos

0

1

2

Size

1

1

1

3 1

Name set adj adj warp warp hierarchic keystone in Y direction warp area

Description byte value known as "set adj" byte value known as "adj warp" byte value known as "warp hierarchic keystone in Y direction" warp area.



0x20

0xa1

0x54

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07

0x08

4-7 4 keystone in Y direction keystone in Y direction value as float

(IEE-754 4bytes)

Content set adj (hex) adj warp (hex) warp hierarchic keystone in


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.284 set warp hierarchic linearity in X direction, write


This command sets the hierarchic warp linearity value in X direction.

Valid from v1.6.

Request

Pos

0

1

2

Size

1

1

1

3 1

Name set adj adj warp warp hierarchic linearity in X direction warp area

Description byte value known as "set adj" byte value known as "adj warp" byte value known as "warp hierarchic linearity in X direction" warp area.



0x20

0xa1

0x51

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07

0x08

4-7 4 linearity in X direction linearity in X direction value as float

(IEE-754 4bytes)

Content set adj (hex) adj warp (hex) warp hierarchic linearity in X direction (hex) all area (hex) right area (hex) bottom area (hex) top area (hex) left area (hex) left top area (hex) right top area (hex) left bottom area (hex) right bottom area (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.285 set warp hierarchic linearity in Y direction, write


This command sets the hierarchic warp linearity value in Y direction.

Valid from v1.6.

Request

Pos

0

1

2

Size

1

1

1

3 1

Name set adj adj warp warp hierarchic linearity in Y direction warp area

Description byte value known as "set adj" byte value known as "adj warp" byte value known as "warp hierarchic linearity in Y direction" warp area.



0x20

0xa1

0x52

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07

0x08

4-7 4 linearity in Y direction linearity in Y direction value as float

(IEE-754 4bytes)

Content set adj (hex) adj warp (hex) warp hierarchic linearity in Y direction (hex) all area (hex) right area (hex) bottom area (hex) top area (hex) left area (hex) left top area (hex) right top area (hex) left bottom area (hex) right bottom area (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.286 set warp hierarchic point shift, write


This command sets the hierarchic warp point shift value.

Valid from v1.6.

Request

Pos

0

1

2

Size

1

1

1

3 1

Name set adj adj warp warp hierarchic point shift horizontal warp area

Description byte value known as "set adj" byte value known as "adj warp" byte value known as "warp hierarchic point shift" warp area.



0x20

0xa1

0x50

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07

0x08

4

5

6-9

1

1

4

X position

Y position

X shift value





Content set adj (hex) adj warp (hex) warp hierarchic point shift




BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.287 set warp keystone horizontal. Deprecated from version 1.6, write


This command sets the warp keystone horizontal value.

Request

Pos

0

1

2

Size

1

1

1

3-6 4 set adj adj warp

Name Description byte value known as "set adj" byte value known as "adj warp" warp keystone horizontal byte value known as keystone value

"warp keystone horizontal" keystone value as float (IEE-754 4bytes)

0x20

0xa1

0x02

Content set adj (hex) adj warp (hex) warp keystone horizontal

(hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.288 set warp keystone vertical. Deprecated from version 1.6, write


This command sets the warp keystone vertical value.

Request

Pos

0

1

2

Size

1

1

1

Name set adj adj warp warp keystone vertical

3-6 4 keystone value

Description byte value known as "set adj" byte value known as "adj warp" byte value known as

"warp keystone vertical" keystone value as float (IEE-754 4bytes)

0x20

0xa1

0x01

Content set adj (hex) adj warp (hex) warp keystone vertical (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.289 set warp line shift horizontal. Deprecated from version 1.6, write


This command sets the warp line shift horizontal value.

Request

Pos

0

1

2

Size

1

1

1

3

4-7

1

4 set adj adj warp

Name Description byte value known as "set adj" byte value known as "adj warp" warp line shift horizontal byte value known as line position line shift value

"warp line shift horizontal" position of the line to shift line shift value as float (IEE-754 4bytes)

0x20

0xa1

0x16

Content set adj (hex) adj warp (hex) warp line shift horizontal

(hex) line position (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.290 set warp line shift vertical. Deprecated from version 1.6, write


This command sets the warp line shift vertical value.

Request

Pos

0

1

2

Size

1

1

1

Name set adj adj warp warp line shift vertical

3

4-7

1

4 line position line shift value


"warp line shift vertical" position of the line to shift line shift value as float (IEE-754 4bytes)

0x20

0xa1

0x15

Content set adj (hex) adj warp (hex) warp line shift vertical (hex) line position (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.291 set warp linearity horizontal. Deprecated from version 1.6, write


This command sets the warp linearity horizontal value.

Request

Pos

0

1

2

Size

1

1

1


Name Description byte value known as "set adj" byte value known as "adj warp" warp linearity horizontal byte value known as linearity value

"warp linearity horizontal" linearity value as float (IEE-754 4bytes)

0x20

0xa1

0x0f

Content set adj (hex) adj warp (hex) warp linearity horizontal

(hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE2 (hex)

BYTE 3 (hex)


3. Commands

3.292 set warp linearity vertical. Deprecated from version 1.6, write


This command sets the warp linearity vertical value.

Request

Pos

0

1

2

Size

1

1

1

Name set adj adj warp warp linearity vertical

3-6 4 linearity value


"warp linearity vertical" linearity value as float (IEE-754 4bytes)

0x20

0xa1

0x10

Content set adj (hex) adj warp (hex) warp linearity vertical (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.293 set warp pin barrel horizontal. Deprecated from version 1.6, write


This command sets the warp pin barrel horizontal value.

Request

Pos

0

1

2

Size

1

1

1


Name Description byte value known as "set adj" byte value known as "adj warp" warp pin barrel horizontal byte value known as barrel value

"warp pin barrel horizontal" barrel value as float (IEE-754 4bytes)

0x20

0xa1

0x0e

Content set adj (hex) adj warp (hex) warp pin barrel horizontal

(hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.294 set warp pin barrel vertical. Deprecated from version 1.6, write


This command sets the warp pin barrel vertical value.

Request

Pos

0

1

2

Size

1

1

1

Name set adj adj warp warp pin barrel vertical

3-6 4 barrel value


"warp pin barrel vertical" barrel value as float (IEE-754 4bytes)

0x20

0xa1

0x0d

Content set adj (hex) adj warp (hex) warp pin barrel vertical (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.295 set warp point shift. Deprecated from version 1.6, write


This command sets the warp point shift value.

Request

Pos

2

3

0

1

4

5-8

1

4

1

1

Size

1

1 set adj adj warp

Name Description byte value known as "set adj" byte value known as "adj warp" warp point shift horizontal byte value known as "warp point shift"

X position X position of the pixel to shift

Y position

X shift value



0x20

0xa1

0x17


Content set adj (hex) adj warp (hex) warp point shift (hex)

X position (hex)

Y position (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.296 set warp rotation, write


This command sets the warp rotation value.

Request

Pos

0

1

2

3-6

Size

1

1

1

4

Name set adj adj warp warp rotation angle value

Description byte value known as "set adj" byte value known as "adj warp" byte value known as "warp rotation" angle value as float (IEE-754 4bytes)

0x20

0xa1

0x03

Content set adj (hex) adj warp (hex) warp rotation (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.297 set warp scale horizontal, write


This command sets the warp scale horizontal value.

Request

Pos

0

1

2

Size

1

1

1

Name set adj adj warp warp scale horizontal

3 1 warp area





0x20

0xa1

0x12

Content set adj (hex) adj warp (hex) warp scale horizontal (hex)

4-7 4 scale value scale value as float (IEE-754 4bytes)

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.298 set warp scale vertical , write


This command sets the warp scale vertical value.

Request

Pos

0

1

2

Size

1

1

1

Name set adj adj warp warp scale vertical

3 1 warp area





0x20

0xa1

0x11

Content set adj (hex) adj warp (hex) warp scale vertical (hex)

4-7 4 scale value scale value as float (IEE-754 4bytes)

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.299 set warp shift horizontal, write


This command sets the warp shift horizontal value.

Request

Pos

0

1

2

Size

1

1

1

Name set adj adj warp warp shift horizontal



"warp shift horizontal" line shift value as float (IEE-754 4bytes)

0x20

0xa1

0x14

Content set adj (hex) adj warp (hex) warp shift horizontal (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.300 set warp shift vertical, write


This command sets the warp shift vertical value.

Request

Pos

0

1

2

3-6

Size

1

1

1

4

Name set adj adj warp warp shift vertical shift value

Description byte value known as "set adj" byte value known as "adj warp"

0x20

0xa1 byte value known as "warp shift vertical" 0x13 shift value as float (IEE-754 4bytes)

Content set adj (hex) adj warp (hex) warp shift vertical (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.301 set warp status, write


This command sets the warp status value.

Request

Pos

2

3

0

1

Size

1

1

1

1

Name set adj adj warp warp status status value

4-5 2 optional warp enable command fields byte value known as "set adj" byte value known as "adj warp" byte value known as "warp status" status value

Description

2 byte bit field is added when status =

0x01

0x20

0xa1

0x00

0x00

0x01

0x02 move points shift grid line linearity pincushion barrel keystone scale

Content set adj (hex) adj warp (hex) warp status (hex) off (hex) on, manual mode (hex) on, file mode (hex) deprecated from version 1.6





(bit) shift rotate

Hierarchic points unused unused unused unused unused unused four corner deprecated from version 1.6

(bit)


3. Commands

3.302 set warp X1. Deprecated from version 1.6, write


This command sets the warp X1 value.

Request

Pos

0

1

2

3-6

Size

1

1

1

4 set adj adj warp warp X1

X1 value

Name Description byte value known as "set adj" byte value known as "adj warp" byte value known as "warp X1"


0x20

0xa1

0x05

Content set adj (hex) adj warp (hex) warp X1 (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands




Request

Pos

0

1

2

3-6

Size

1

1

1


X2 value



0x20

0xa1

0x07


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands




Request

Pos

0

1

2

3-6

Size

1

1

1


X3 value



0x20

0xa1

0x09


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands




Request

Pos

0

1

2

3-6

Size

1

1

1


X4 value



0x20

0xa1

0x0b


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.306 set warp Y1. Deprecated from version 1.6, write


This command sets the warp Y1 value.

Request

Pos

0

1

2

3-6

Size

1

1

1

4 set adj adj warp warp Y1

Y1 value

Name Description byte value known as "set adj" byte value known as "adj warp" byte value known as "warp Y1"


0x20

0xa1

0x06

Content set adj (hex) adj warp (hex) warp Y1 (hex)

BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands




Request

Pos

0

1

2

3-6

Size

1

1

1


Y2 value



0x20

0xa1

0x08


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands




Request

Pos

0

1

2

3-6

Size

1

1

1


Y3 value



0x20

0xa1

0x0a


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands




Request

Pos

0

1

2

3-6

Size

1

1

1


Y4 value



0x20

0xa1

0x0c


BYTE 0 (hex)

BYTE 1 (hex)

BYTE 2 (hex)

BYTE 3 (hex)


3. Commands

3.310 sharpness possible, read


This command checks if sharpness adjustment is possible.

Request

Pos

0

1

Size

1

1

Name adj possible adj sharpness

Description value known as "adj possible" value known as "adj sharpness"

Response

Pos Size

0

1

2

1

1

1

Name adj possible adj sharpness possible

Description value known as "adj possible" value known as "adj sharpness" adjustment is possible or not

0x29

0x05

Content adj possible (hex) sharpness (hex)

0x29

0x05

0x00

0x01

Content adj possible (hex) sharpness (hex) not possible (hex) possible (hex)


3. Commands

3.311 text off, write


This command sets the text off.

Request

Pos

0

Size

1 text off

Name Description byte value known as "text off" 0x0e

Content text off (hex)


3. Commands

3.312 text on, write


This command sets the text on.

Request

Pos

0

Size

1 text on

Name Description byte value known as "text on" 0x0d

Content text on (hex)


3. Commands

3.313 tint possible, read


This command checks if tint adjustment is possible.

Request

Pos

0

1

Size

1

1

Name adj possible adj tint

Description value known as "adj possible" value known as "adj tint"

Response

Pos Size

0

1

2

1

1

1

Name adj possible adj tint possible

Description value known as "adj possible" value known as "adj tint" adjustment is possible or not

0x29

0x04

Content adj possible (hex) tint (hex)

0x29

0x04

0x00

0x01

Content adj possible (hex) tint (hex) not possible (hex) possible (hex)


3. Commands

3.314 unfreeze, write


This command unfreezes the active window.

Request

Pos

0

1

Size

1

1 min adj adj freeze

Name Description byte value known as "min adj" byte value known as

"adj freeze"

0x26

0x23

Content min adj (hex) adj freeze (hex)


3. Commands

3.315 warp file delete, write


This command deletes a warp file.

Request

Pos

0

1

NA

Size

1

1

NA filename

Name Description

C-language string starting with

"$HDXWARP/"

Content

0xbd

0xc6 filename (string)


3. Commands

3.316 warp file rename, write


This command renames a warp file.

Request

Pos

0

1

NA

Size

1

1

Name

NA old filename

NA NA new filename

Description


"$HDXWARP/"


"$HDXWARP/"

Content

0xbd

0xc4 old filename (string) new filename (string)


3. Commands

3.317 write auto picture alignment configuration, write


This command writes the auto picture alignment configuration.

Request

Pos

0

1

Size

1

1

2 1

Name file write auto picture alignment configuration


"write auto picture alignment" configuration

0xbd

0x87

0x00

0x01

0x02

Content file (hex) write auto picture alignment

(hex) at file load (hex) off (hex) always (hex)


3. Commands

3.318 write barscale position, write


This command writes the barscale position.

Request

Pos

0

1

Size

1

1

Name projector info write barscale position

2 1 position


"write barscale position" position value

0xf5

0x82

Content projector info (hex) write barscale position (hex)

0x11

0x12

0x13

0x21

0x22

0x23

0x31

0x32

0x33

Top Left (hex)

Top Mid (hex)

Top Right (hex)

Mid Left (hex)

Mid Mid (hex)

Mid Right (hex)

Bottom Left (hex)

Bottom Mid (hex)

Bottom Right (hex)


3. Commands

3.319 write customer id, write


This command writes the customer id.

Request

Pos

0

1

NA

Size

1

1

Name projector info write customer id

NA customer ID

Description byte value known as "projector info" 0xf5 byte value known as "write customer id" 0x81 customer ID as C-string

About datafield 2 (customer ID) maximum 15 characters as net data (terminating "\0" not included)

Content projector info (hex) write customer id (hex) customer ID (string)


3. Commands

3.320 write DMX address, write


This command writes the DMX address.

Request

Pos

0

1

Size

1

1

Name

DMX write DMX address

2-3 2 DMX address


"write DMX address"

DMX address as WORD range 1 -> 512

0x57

0x41

Content

DMX (hex) write DMX address (hex)

MSB (hex)

LSB (hex)


3. Commands

3.321 write DMX mode, write


This command writes the DMX mode.

Request

Pos

0

1

Size

1

1

Name

DMX write DMX mode

2 1 mode


"write DMX mode"

DMX mode

0x57

0x43

Content

DMX (hex) write DMX mode (hex)

0x00

0x01

0x02 full (hex) basic (hex) extended (hex)


3. Commands

3.322 write DMX universe, write


This command writes the DMX universe applicable to Art-Net.

Request

Pos

0

1

Size

1

1

Name

DMX write DMX universe

2-3 2 universe value


"write DMX universe" universe value as a WORD

About datafield 2 (universe value) current implementation takes only LSB value into account

0x57

0x45

Content

DMX (hex) write DMX universe (hex)

MSB (hex)

LSB (hex)


3. Commands

3.323 write gateway configuration, write


This command writes the gateway configuration.

Request

Pos

0

1

Size

1

1

2 1

Name network write gateway configuration config

Description value known as "network" write gateway configuration gateway configuration

0x11

0x8b

0x00

0x01

Content network (hex) write gateway configuration

(hex) wired (hex) wireless (hex)


3. Commands

3.324 write infrared ports status, write


This command writes the infrared ports status, enabled or disabled.

Request

Pos

0

1

Size

1

1

Name write ir ports ir ports status

Description byte value known as "write ir ports" ir ports status as byte value

Content

0x6e write ir ports (hex) bit 7 reserved (bit) bit 6 reserved (bit) bit 5 reserved (bit) bit 4 reserved (bit) bit 3 side receiver (bit) bit 2 reserved (bit) bit 1 rear receiver (bit) bit 0 front receiver (bit)

About datafield 1 (ir ports status) bit value 0 = disabled bit value 1 = enabled


3. Commands

3.325 write lamp CLO status, write


This command writes the lamp CLO (Contstant Light Output) status.

Request

Pos

0

1

Size

1

1

2 1

Name lamp write lamp clo status status


"write lamp clo status" status

0x76

0x16

Content lamp (hex) write lamp clo status (hex)

0x00



3. Commands

3.326 write lamp CLO target lumens, write


This command writes the lamp CLO (Constant Light Output) target lumens.

Request

Pos

0

1

2-5

Size

1

1

4

Name lamp write lamp clo value lumens

Description value known as "lamp" write lamp clo value lumens as DWORD

0x76

0x1e

Content lamp (hex) write lamp clo value (hex)

MSB (hex)

BYTE 1 (hex)

BYTE 2 (hex)

LSB (hex)


3. Commands

3.327 write language, write


This command writes the language selection.

Request

Pos

0

1

NA

Size

1

1

Name projector info write language

NA language

Description byte value known as "projector info" byte value known as "write language" language two-letter code as C-string

0xf5

0x84

"en"

"fr"

"de"

"es"

"pt"

"nl"

"zh"

"ja"

"ko"

Content projector info (hex) write language (hex)

English (string)

French (string)

Deutch (string)

Spanish (string)

Portuguese (string)

Dutch (string)

Chinese (string)

Japanese (string)

Korean (string)


3. Commands

3.328 write menu position, write


This command writes the menu position.

Request

Pos

0

1

Size

1

1

Name projector info write menu position


"write menu position"

Response

Pos

0

Size

1

1 1

Name projector info write menu position

2 1 position


"write menu position" position value

0xf5

0x83

Content projector info (hex) write menu position (hex)

0xf5

0x83

Content projector info (hex) write menu position (hex)

0x11

0x12

0x13

0x21

0x22

0x23

0x31

0x32

0x33

Top Left (hex)

Top Mid (hex)

Top Right (hex)

Mid Left (hex)

Mid Mid (hex)

Mid Right (hex)

Bottom Left (hex)

Bottom Mid (hex)

Bottom Right (hex)


3. Commands

3.329 write network configuration, write


This command writes the network configuration.

Request

Pos

0

1

Size

1

1

2 1

Name network write network configuration mode

Description value known as "network" write network configuration address assignment mode

3-6 4 IP address

7-10 4 subnet mask


15-20 6 MAC address

0x11

0x81

0x00

0x01

Content network (hex) write network configuration

(hex) manual (hex)



3. Commands

3.330 write projector off, write


This command sets the projector off. (off = stand by)

When the lamp is off, the projector is switched off.

When the lamp is on, the lamp is switched off and the projector is switched off.

Request

Pos

0

Size

1

Name write projector off

Description byte value known as "write projector off" 0x66

Content write projector off (hex)


3. Commands

3.331 write projector on, write


This command sets the projector on. When the lamp is off, the projector is switched on (= wake up) The lamp remains off. Use the

"set lamp status" command to switch on the lamp. When the lamp is on there is no change.

Request

Pos

0

Size

1

Name write projector on


"write projector on"

0x65

Content write projector on (hex)


3. Commands

3.332 write wifi configuration, write


This command writes the wifi configuration.

Request

Pos

0

1

2

Size

1

1

1

Name network write wifi configuration mode

Description value known as "network" write wifi configuration address assignment mode

3-6 4 IP address

7-10 4 subnet mask


15-20 6 MAC address

0x11

0x86

0x00

0x01

Content network (hex) write wifi configuration (hex) manual (hex)



3. Commands

3.333 write wifi key mgmt, write


This command writes the wifi key mgmt.

Request

Pos

0

1

2

Size

1

1

1

Name network write wifi key mgmt security mode

NA NA PSK

Description value known as "network" write wifi key mgmt security mode

WPA/WPA2 (auto detected)

PSK (Pre Shared Key)

TKIP/EAS (auto detected)

PSK as C-string

About datafield 3 (PSK)

Only applicable if security mode is activated.

0x11

0x88

0x00

0x01

Content network (hex) write wifi key mgmt (hex) no encryption (hex)

WPA/WPA2 (hex)

PSK (string)


3. Commands

3.334 write wifi scan, write


This command triggers a scan for Access Points.

Request

Pos

0

1

Size

1

1

Name network write wifi scan

Description value known as "network" write wifi scan

0x11

0x89

Content network (hex) write wifi scan (hex)


3. Commands

3.335 write wifi SSID , write


This command writes the wifi SSID of the AP (Access Point) to connect to.

The projector itself is not an AP.

Request

Pos

0

1

NA

Size

1 network

Name

1 write wifi SSID configuration

NA SSID

Description value known as "network" write wifi SSID configuration

SSID as a C-string

0x11

0x87

Content network (hex) write wifi SSID configuration

(hex)

SSID (string)


3. Commands

3.336 write wifi status, write


This command writes the wifi status.

Request

Pos

0

1

2

Size

1

1

1

Name network write wifi status status

Description value known as "network" write wifi status status

On = infrastructure mode

About datafield 2 (status)

"Infrastructure" mode, meaning no ad hoc/point to point connection supported

0x11

0x8a

0x00

0x01

Content network (hex) write wifi status (hex) off (hex) on (hex)


3. Commands


INDEX

Numerics/Symbols

3D dark time adjustment 19–20 read 19

write 20

3D Double/Tripple Flash limit 21–22 read 21

write 22

3D field dominance

23–24 read 23

write 24

3D L/R Output Reference Delay 25–26 read 25

write 26

3D mode

27–28 read 27

write 28

3D status 29–30 read 29

write 30

3D Sync Loop status 31–32

read 31

write 32

A

About this document 8

B

Barco Projection Protocol 9–10

brightness possible 33 read 33

C

clear test pattern 34 write 34

Command representation 16

contrast possible 35 read 35

D

decrement blanking bottom 36 write 36

decrement blanking left 37 write 37

decrement blanking right 38 write 38

decrement blanking top 39 write 39

decrement brightness 40 write 40

decrement color balance blue green ratio 41 write 41

decrement color balance red green ratio 42 write 42

decrement contrast 43 write 43

decrement dimming value 44 write 44

decrement gamma 45 write 45

decrement input black balance 46 write 46

decrement input white balance 47 write 47

decrement phase 48 write 48

decrement saturation 49 write 49


decrement sharpness 50 write 50

decrement shutter 51 write 51

decrement tint 52 write 52

E

Ethernet 13

F

freeze 53 write 53

function read electronic convergence 54 read 54

function read input balance pattern status 55 read 55

function write electronic convergence 56 write 56

G

get aspect ratio file 57 read 57

get aspect ratio height 58 read 58

get aspect ratio width 59 read 59

get baudrate 60 read 60

get blanking bottom 61 read 61

get blanking left 62 read 62

get blanking right 63 read 63

get blanking top 64 read 64

get brightness 65 read 65

get clamp delay 66 read 66

get clamp width 67 read 67

get color balance blue green ratio 68 read 68

get color balance red green ratio 69 read 69

get color temperature 70 read 70

get common address 71 read 71

get contrast 72 read 72

get contrast enhancement 73 read 73

get dimming 74 read 74

get ext contrast 75 read 75

get ext contrast enhancement 76 read 76

get ext gamma 77 read 77

get ext phase 78 read 78

get ext sharpness 79 read 79

get freeze status 80 read 80

Index

359

Index

get gamma 81 read 81

get gamma (text value) 82 read 82

get input black balance 83 read 83

get input white balance 84 read 84

get intensity 85 read 85

get ir hold off configuration 86 read 86

get lamp status 87–88

read

87–88

get layout 89 read 89

get lcd backlight level 90 read 90

get lcd time out 91 read 91

get lock 92 read 92

get no signal color logo 93 read 93

get no signal shutdown delay 94 read 94

get no signal shutdown status 95 read 95

get output window native resolution status 96 read 96

get output window parameters 97 read 97

get output window status 98 read 98

get P7 TCGD blue X 99 read 99

get P7 TCGD blue Y 100 read 100

get P7 TCGD cyan X 101 read 101

get P7 TCGD cyan Y 102 read 102

get P7 TCGD green Y 103 read 103

get P7 TCGD magenta X 104 read 104

get P7 TCGD magenta Y 105 read 105

get P7 TCGD red X 106 read 106

get P7 TCGD red Y 107 read 107

get P7 TCGD selection 108 read 108

get P7 TCGD white X 109 read 109

get P7 TCGD white Y 110 read 110

get P7 TCGD yellow X 111 read 111

get P7 TCGD yellow Y 112 read 112

get phase 113 read 113

get projector address 114 read 114

get same lens settings status 115 read 115

get saturation 116 read 116

get scan/orientation configuration 117 read 117

get sharpness 118 read 118

get shutter status 119 read 119

360

get soft edge black level 120 read 120

get soft edge size black level bottom 121 read 121

get soft edge size black level left 122 read 122

get soft edge size black level right 123 read 123

get soft edge size black level top 124 read 124

get soft edge size bottom 125 read 125

get soft edge size left 126 read 126

get soft edge size right 127 read 127

get soft edge size top 128 read 128

get soft edge status 129 read 129

get source 130 read 130

get source extended 131 read 131

get text on 134 read 134

get tint 135 read 135

get warp axis position 136 read 136

get warp file 137 read 137

get warp grid size 138 read 138

get warp hierarchic keystone in X direction 139 read 139

get warp hierarchic keystone in Y direction 140 read 140

get warp hierarchic linearity in X direction 141 read 141

get warp hierarchic linearity in Y direction 142 read 142

get warp hierarchic point shift 143 read 143

get warp keystone horizontal. Deprecated from version 1.6 144 read 144

get warp keystone vertical. Deprecated from version 1.6

145 read 145

get warp line shift horizontal. Deprecated from version 1.6 146 read 146

get warp line shift vertical. Deprecated from version 1.6 147 read 147

get warp linearity horizontal. Deprecated from version 1.6

148 read 148

get warp linearity vertical. Deprecated from version 1.6 149 read 149

get warp pin barrel horizontal. Deprecated from version 1.6 150 read 150

get warp pin barrel vertical. Deprecated from version 1.6 151 read 151

get warp point shift. Deprecated from version 1.6 152 read 152

get warp rotation 153 read 153

get warp scale horizontal. 154 read 154

get warp scale vertical. 155 read 155

get warp shift horizontal 156 read 156

get warp shift vertical 157 read 157

get warp status 158 read 158

get warp X1. Deprecated from version 1.6 159 read 159


Index

I




get warp Y1. Deprecated from version 1.6 163 read 163




get window selection 167 read 167

increment blanking bottom 168 write 168

increment blanking left 169 write 169

increment blanking right 170 write 170

increment blanking top 171 write 171

increment brightness 172 write 172

increment color balance blue green 173 write 173

increment color balance red green 174 write 174

increment contrast 175 write 175

increment dimming value 176 write 176

increment gamma 177 write 177

increment input black balance 178 write 178

increment input white balance 179 write 179

increment phase 180 write 180

increment saturation 181 write 181

increment sharpness 182 write 182

increment shutter 183 write 183

increment tint 184 write 184

input format horizontal total possible 185 read 185

Introduction 7

P

phase possible 186 read 186

Projection Protocol 9–10

Protocol 9–10

R read

19, 21, 23, 25, 27, 29, 31, 33, 35, 54–55, 57–131, 134–167,

185–213, 215, 331, 334

3D dark time adjustment 19

3D Double/Tripple Flash limit 21

3D field dominance 23

3D L/R Output Reference Delay 25

3D mode 27

3D status 29

3D Sync Loop status 31

brightness possible 33

contrast possible 35

function read electronic convergence 54

function read input balance pattern status 55

get aspect ratio file 57

get aspect ratio height 58

get aspect ratio width 59

get baudrate 60

get blanking bottom 61

get blanking left 62

get blanking right 63

get blanking top 64

get brightness 65

get clamp delay 66

get clamp width 67

get color balance blue green ratio 68

get color balance red green ratio 69

get color temperature 70

get common address 71

get contrast 72

get contrast enhancement 73

get dimming 74

get ext contrast 75

get ext contrast enhancement 76

get ext gamma 77

get ext phase 78

get ext sharpness 79

get freeze status 80

get gamma 81

get gamma (text value) 82

get input black balance 83

get input white balance 84

get intensity 85

get ir hold off configuration 86

get lamp status 87–88

get layout 89

get lcd backlight level 90

get lcd time out 91

get lock 92

get no signal color logo 93

get no signal shutdown delay 94

get no signal shutdown status 95

get output window native resolution status 96

get output window parameters 97

get output window status 98

get P7 TCGD blue X 99

get P7 TCGD blue Y 100

get P7 TCGD cyan X 101

get P7 TCGD cyan Y 102

get P7 TCGD green Y 103

get P7 TCGD magenta X 104

get P7 TCGD magenta Y 105

get P7 TCGD red X 106

get P7 TCGD red Y 107

get P7 TCGD selection 108

get P7 TCGD white X 109

get P7 TCGD white Y 110

get P7 TCGD yellow X 111

get P7 TCGD yellow Y 112

get phase 113

get projector address 114

get same lens settings status 115

get saturation 116

get scan/orientation configuration 117

get sharpness 118

get shutter status 119

get soft edge black level 120

get soft edge size black level bottom 121

get soft edge size black level left 122

get soft edge size black level right 123

get soft edge size black level top 124

get soft edge size bottom 125

get soft edge size left 126

get soft edge size right 127

get soft edge size top 128

get soft edge status 129


Index

get source 130

get source extended 131

get text on 134

get tint 135

get warp axis position 136

get warp file 137

get warp grid size 138

get warp hierarchic keystone in X direction 139

get warp hierarchic keystone in Y direction 140

get warp hierarchic linearity in X direction 141

get warp hierarchic linearity in Y direction 142

get warp hierarchic point shift 143

get warp keystone horizontal. Deprecated from version 1.6

144

get warp keystone vertical. Deprecated from version 1.6 145

get warp line shift horizontal. Deprecated from version 1.6 146

get warp line shift vertical. Deprecated from version 1.6 147

get warp linearity horizontal. Deprecated from version 1.6 148

get warp linearity vertical. Deprecated from version 1.6 149

get warp pin barrel horizontal. Deprecated from version 1.6

150

get warp pin barrel vertical. Deprecated from version 1.6 151

get warp point shift. Deprecated from version 1.6 152

get warp rotation 153

get warp scale horizontal. 154

get warp scale vertical. 155

get warp shift horizontal 156

get warp shift vertical 157

get warp status 158

get warp X1. Deprecated from version 1.6 159




get warp Y1. Deprecated from version 1.6 163




get window selection 167

input format horizontal total possible 185

phase possible 186

read auto picture alignment configuration 187

read barscale position 188

read customer id 189

read date time 190

read DMX address 191

read DMX mode 192

read DMX universe 193

read gateway configuration 194

read global software version 195

read image load method 196

read infrared ports 197

read lamp CLO status 198

read lamp CLO target lumens 199

read lamp runtime 200

read language 201

read menu position 202

read network configuration 203

read panel size 204

read projector runtime 205

read projector serial number 206

read projector status 207

read wifi configuration 208

read wifi key Mgmt 209

read wifi scan 210

read wifi SSID 211

read wifi status 212

RS interface selection 213

saturation possible 215

sharpness possible 331

tint possible 334

read auto picture alignment configuration 187 read 187

read barscale position 188 read 188

read customer id 189 read 189

read date time 190 read 190

read DMX address 191

S

read 191

read DMX mode 192 read 192

read DMX universe 193 read 193

read gateway configuration 194 read 194

read global software version 195 read 195

read image load method 196 read 196

read infrared ports 197 read 197

read lamp CLO status 198 read 198

read lamp CLO target lumens 199 read 199

read lamp runtime 200 read 200

read language 201 read 201

read menu position 202 read 202

read network configuration 203 read 203

read panel size 204 read 204

read projector runtime 205 read 205

read projector serial number 206 read 206

read projector status 207 read 207

read wifi configuration 208 read 208

read wifi key Mgmt 209 read 209

read wifi scan 210 read 210

read wifi SSID read 211

read 213

write 214

RS232 15

RS422 15

211

read wifi status 212 read 212

Representation 16

RS interface selection 213–214

saturation possible 215 read 215

save current adjustments to a file 216 write 216

save custom settings 217 write 217

save image settings 218 write 218

select main window as prefix 219 write 219

select PIP window as prefix 220 write 220

select source 1 as prefix 221 write 221




select window 225 write 225

set aspect ratio file 226


write 226

set aspect ratio height 227 write 227

set aspect ratio width 228 write 228

set blanking bottom 229 write 229

set blanking left 230 write 230

set blanking right 231 write 231

set blanking top 232 write 232

set brightness 233 write 233

set clamp delay 234 write 234

set clamp width 235 write 235

set color balance blue green ratio 236 write 236

set color balance red green ratio 237 write 237

set color temperature 238 write 238

set contrast 239 write 239

set contrast enhancement 240 write 240

set dimming 241 write 241

set gamma 242 write 242

set input black balance 243 write 243

set input white balance 244 write 244

set intensity 245 write 245

set lamp status 246 write 246

set layout 247 write 247

set lcd backlight level 248 write 248

set lcd time out 249 write 249

set lens focus 250 write 250

set lens shift 251 write 251

set lens zoom 252 write 252

set lock 253 write 253

set no signal color logo 254 write 254

set no signal shutdown delay 255 write 255

set no signal shutdown status 256 write 256

set output window in native resolution 257 write 257

set output window parameters 258 write 258

set output window status 259 write 259

set P7 TCGD blue X 260 write 260

set P7 TCGD blue Y 261 write 261

set P7 TCGD cyan X 262 write 262

set P7 TCGD cyan Y 263 write 263

set P7 TCGD green X 264


write 264

set P7 TCGD green Y 265 write 265

set P7 TCGD magenta X 266 write 266

set P7 TCGD magenta Y 267 write 267

set P7 TCGD red X 268 write 268

set P7 TCGD red Y 269 write 269

set P7 TCGD selection 270 write 270

set P7 TCGD white X 271 write 271

set P7 TCGD white Y 272 write 272

set P7 TCGD yellow X 273 write 273

set P7 TCGD yellow Y 274 write 274

set phase 275 write 275

set same lens settings status 276 write 276

set saturation 277 write 277

set scan/orientation configuration 278 write 278

set sharpness 279 write 279

set shutter position 280 write 280

set soft edge black level 281 write 281

set soft edge size black level bottom 282 write 282

set soft edge size black level left 283 write 283

set soft edge size black level right 284 write 284

set soft edge size black level top 285 write 285

set soft edge size bottom 286 write 286

set soft edge size left 287 write 287

set soft edge size right 288 write 288

set soft edge size top 289 write 289

set soft edge status 290 write 290

set source 291 write 291

set source extended 292 write 292

set test pattern by name 294 write 294

set test pattern convergence 295 write 295

set test pattern convergence green blue 296 write 296

set test pattern convergence red blue 297 write 297

set test pattern convergence red green blue 298 write 298

set tint 299 write 299

set warp axis position 300 write 300

set warp file 301 write 301

set warp grid size 302 write 302

set warp hierarchic keystone in X direction 303

Index

363

Index

write 303

set warp hierarchic keystone in Y direction 304 write 304

set warp hierarchic linearity in X direction 305 write 305

set warp hierarchic linearity in Y direction 306 write 306

set warp hierarchic point shift 307 write 307

set warp keystone horizontal. Deprecated from version 1.6 308 write 308

set warp keystone vertical. Deprecated from version 1.6

309 write 309

set warp line shift horizontal. Deprecated from version 1.6

310 write 310

set warp line shift vertical. Deprecated from version 1.6 311 write 311

set warp linearity horizontal. Deprecated from version 1.6

312 write 312

set warp linearity vertical. Deprecated from version 1.6 313 write 313

set warp pin barrel horizontal. Deprecated from version 1.6 314 write 314

set warp pin barrel vertical. Deprecated from version 1.6 315 write 315

set warp point shift. Deprecated from version 1.6 316 write 316

set warp rotation 317 write 317

set warp scale horizontal 318 write 318

set warp scale vertical 319 write 319

set warp shift horizontal 320 write 320

set warp shift vertical 321 write 321

set warp status 322 write 322

set warp X1. Deprecated from version 1.6 323 write 323




set warp Y1. Deprecated from version 1.6 327 write 327




sharpness possible 331 read 331

T

text off 332 write 332

text on 333 write 333

tint possible 334 read 334

U

unfreeze 335 write 335

USB-B 15

W

warp file delete 336 write 336

warp file rename 337 write 337

write 20, 22, 24, 26, 28, 30, 32, 34, 36–53, 56, 168–184, 214,

216–292, 294–330, 332–333, 335–357

3D dark time adjustment 20

3D Double/Tripple Flash limit 22

3D field dominance 24

3D L/R Output Reference Delay 26

3D mode 28

3D status 30

3D Sync Loop status 32

clear test pattern 34

decrement blanking bottom 36

decrement blanking left 37

decrement blanking right 38

decrement blanking top 39

decrement brightness 40

decrement color balance blue green ratio 41

decrement color balance red green ratio 42

decrement contrast 43

decrement dimming value 44

decrement gamma 45

decrement input black balance 46

decrement input white balance 47

decrement phase 48

decrement saturation 49

decrement sharpness 50

decrement shutter 51

decrement tint 52

freeze 53

function write electronic convergence 56

increment blanking bottom 168

increment blanking left 169

increment blanking right 170

increment blanking top 171

increment brightness 172

increment color balance blue green 173

increment color balance red green 174

increment contrast 175

increment dimming value 176

increment gamma 177

increment input black balance 178

increment input white balance 179

increment phase 180

increment saturation 181

increment sharpness 182

increment shutter 183

increment tint 184

RS interface selection 214

save current adjustments to a file 216

save custom settings 217

save image settings 218

select main window as prefix 219

select PIP window as prefix 220

select source 1 as prefix 221




select window 225

set aspect ratio file 226

set aspect ratio height 227

set aspect ratio width 228

set blanking bottom 229

set blanking left 230

set blanking right 231

set blanking top 232

set brightness 233

set clamp delay 234

set clamp width 235

set color balance blue green ratio 236

set color balance red green ratio 237

set color temperature 238

set contrast 239


Index

set contrast enhancement 240

set dimming 241

set gamma 242

set input black balance 243

set input white balance 244

set intensity 245

set lamp status 246

set layout 247

set lcd backlight level 248

set lcd time out 249

set lens focus 250

set lens shift 251

set lens zoom 252

set lock 253

set no signal color logo 254

set no signal shutdown delay 255

set no signal shutdown status 256

set output window in native resolution 257

set output window parameters 258

set output window status 259

set P7 TCGD blue X 260

set P7 TCGD blue Y 261

set P7 TCGD cyan X 262

set P7 TCGD cyan Y 263

set P7 TCGD green X 264

set P7 TCGD green Y 265

set P7 TCGD magenta X 266

set P7 TCGD magenta Y 267

set P7 TCGD red X 268

set P7 TCGD red Y 269

set P7 TCGD selection 270

set P7 TCGD white X 271

set P7 TCGD white Y 272

set P7 TCGD yellow X 273

set P7 TCGD yellow Y 274

set phase 275

set same lens settings status 276

set saturation 277

set scan/orientation configuration 278

set sharpness 279

set shutter position 280

set soft edge black level 281

set soft edge size black level bottom 282

set soft edge size black level left 283

set soft edge size black level right 284

set soft edge size black level top 285

set soft edge size bottom 286

set soft edge size left 287

set soft edge size right 288

set soft edge size top 289

set soft edge status 290

set source 291

set source extended 292

set test pattern by name 294

set test pattern convergence 295

set test pattern convergence green blue 296

set test pattern convergence red blue 297

set test pattern convergence red green blue 298

set tint 299

set warp axis position 300

set warp file 301

set warp grid size 302

set warp hierarchic keystone in X direction 303

set warp hierarchic keystone in Y direction 304

set warp hierarchic linearity in X direction 305

set warp hierarchic linearity in Y direction 306

set warp hierarchic point shift 307

set warp keystone horizontal. Deprecated from version 1.6 308

set warp keystone vertical. Deprecated from version 1.6

309

set warp line shift horizontal. Deprecated from version 1.6 310

set warp line shift vertical. Deprecated from version 1.6 311

set warp linearity horizontal. Deprecated from version 1.6

312

set warp linearity vertical. Deprecated from version 1.6 313

set warp pin barrel horizontal. Deprecated from version 1.6 314

set warp pin barrel vertical. Deprecated from version 1.6

315

set warp point shift. Deprecated from version 1.6 316

set warp rotation 317

set warp scale horizontal 318

set warp scale vertical 319

set warp shift horizontal 320

set warp shift vertical 321

set warp status 322

set warp X1. Deprecated from version 1.6

323


324


325


326

set warp Y1. Deprecated from version 1.6

327


328


329


330

text off 332

text on 333

unfreeze 335

warp file delete 336

warp file rename 337

write auto picture alignment configuration 338

write barscale position 339

write customer id 340

write DMX address 341

write DMX mode 342

write DMX universe 343

write gateway configuration 344

write infrared ports status 345

write lamp CLO status 346

write lamp CLO target lumens 347

write language 348

write menu position 349

write network configuration 350

write projector off 351

write projector on 352

write wifi configuration 353

write wifi key mgmt 354

write wifi scan 355

write wifi SSID 356

write wifi status 357

write auto picture alignment configuration 338 write 338

write barscale position 339 write 339

write customer id 340 write 340

write DMX address 341 write 341

write DMX mode 342 write 342

write DMX universe 343 write 343

write gateway configuration 344 write 344

write infrared ports status 345 write 345

write lamp CLO status 346 write 346

write lamp CLO target lumens 347 write 347

write language 348 write 348

write menu position 349 write 349

write network configuration 350 write 350

write projector off 351 write 351

write projector on 352 write 352

write wifi configuration 353 write 353

write wifi key mgmt 354 write 354

write wifi scan 355 write 355

write wifi SSID 356


Index

write 356

write wifi status 357 write 357


Barco HDX-W14 Reference Manual

Command Catalog

Reference manual

TABLE OF CONTENTS

1. INTRODUCTION

2. THE BARCO PROJECTION PROTOCOL

3. COMMANDS

INDEX

Related manuals

Barco

HDQ-2K40

Barco

PGWX-61B

Barco

CLM-HD6

Digital Projection

TITAN WUXGA 330 3D L Ultra Contrast

Digital Projection

Titan sx+ 3D-L Ultra Contrast

Digital Projection

Digital Projection Titan 1080p Dual 3D Ultra Contrast

Digital Projection

Digital Projection Titan 1080p 3D-L Ultra Contrast

Barco

FLM R20+

Barco

iCon H600

Christie

D4K35

Table of contents