3.315 warp file delete, write. Barco HDX-W14, HDX-W18, HDX-W12, HDX-W20 FLEX
Add to my manuals
370 Pages
advertisement
▼
Scroll to page 2
of 370
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 11 1. Introduction
- 12 About this document
- 13 2. The Barco Projection Protocol
- 14 The Barco Projection Protocol explained
- 17 Ethernet communication
- 19 RS232/RS422/USB-B communication
- 20 The command representation in this manual
- 21 3. Commands
- 23 3D dark time adjustment, read
- 24 3D dark time adjustment, write
- 25 3D Double/Tripple Flash limit, read
- 26 3D Double/Tripple Flash limit, write
- 27 3D field dominance, read
- 28 3D field dominance, write
- 29 3D L/R Output Reference Delay, read
- 30 3D L/R Output Reference Delay, write
- 31 3D mode, read
- 32 3.10 3D mode, write
- 33 3.11 3D status, read
- 34 3.12 3D status, write
- 35 3.13 3D Sync Loop status, read
- 36 3.14 3D Sync Loop status, write
- 37 3.15 brightness possible, read
- 38 3.16 clear test pattern, write
- 39 3.17 contrast possible, read
- 40 3.18 decrement blanking bottom, write
- 41 3.19 decrement blanking left, write
- 42 3.20 decrement blanking right, write
- 43 3.21 decrement blanking top, write
- 44 3.22 decrement brightness, write
- 45 3.23 decrement color balance blue green ratio, write
- 46 3.24 decrement color balance red green ratio, write
- 47 3.25 decrement contrast, write
- 48 3.26 decrement dimming value, write
- 49 3.27 decrement gamma, write
- 50 3.28 decrement input black balance , write
- 51 3.29 decrement input white balance , write
- 52 3.30 decrement phase, write
- 53 3.31 decrement saturation, write
- 54 3.32 decrement sharpness, write
- 55 3.33 decrement shutter, write
- 56 3.34 decrement tint, write
- 57 3.35 freeze, write
- 58 3.36 function read electronic convergence, read
- 59 3.37 function read input balance pattern status, read
- 60 3.38 function write electronic convergence , write
- 61 3.39 get aspect ratio file, read
- 62 3.40 get aspect ratio height, read
- 63 3.41 get aspect ratio width, read
- 64 3.42 get baudrate, read
- 65 3.43 get blanking bottom, read
- 66 3.44 get blanking left, read
- 67 3.45 get blanking right, read
- 68 3.46 get blanking top, read
- 69 3.47 get brightness, read
- 70 3.48 get clamp delay, read
- 71 3.49 get clamp width, read
- 72 3.50 get color balance blue green ratio, read
- 73 3.51 get color balance red green ratio, read
- 74 3.52 get color temperature, read
- 75 3.53 get common address, read
- 76 3.54 get contrast, read
- 77 3.55 get contrast enhancement, read
- 78 3.56 get dimming, read
- 79 3.57 get ext contrast, read
- 80 3.58 get ext contrast enhancement , read
- 81 3.59 get ext gamma, read
- 82 3.60 get ext phase, read
- 83 3.61 get ext sharpness, read
- 84 3.62 get freeze status, read
- 85 3.63 get gamma, read
- 81 R5905447 COMMAND CATALOG
- 86 3.64 get gamma (text value), read
- 87 3.65 get input black balance, read
- 88 3.66 get input white balance, read
- 89 3.67 get intensity, read
- 90 3.68 get ir hold off configuration, read
- 91 3.69 get lamp status, read
- 92 3.70 get lamp status, read
- 93 3.71 get layout, read
- 94 3.72 get lcd backlight level, read
- 95 3.73 get lcd time out, read
- 96 3.74 get lock, read
- 97 3.75 get no signal color logo, read
- 98 3.76 get no signal shutdown delay, read
- 99 3.77 get no signal shutdown status, read
- 100 3.78 get output window native resolution status, read
- 101 3.79 get output window parameters, read
- 102 3.80 get output window status, read
- 103 3.81 get P7 TCGD blue X, read
- 104 3.82 get P7 TCGD blue Y, read
- 105 3.83 get P7 TCGD cyan X, read
- 106 3.84 get P7 TCGD cyan Y, read
- 107 3.85 get P7 TCGD green Y, read
- 108 3.86 get P7 TCGD magenta X, read
- 109 3.87 get P7 TCGD magenta Y, read
- 110 3.88 get P7 TCGD red X, read
- 111 3.89 get P7 TCGD red Y, read
- 112 3.90 get P7 TCGD selection, read
- 113 3.91 get P7 TCGD white X, read
- 114 3.92 get P7 TCGD white Y, read
- 115 3.93 get P7 TCGD yellow X, read
- 116 3.94 get P7 TCGD yellow Y, read
- 117 3.95 get phase, read
- 118 3.96 get projector address, read
- 119 3.97 get same lens settings status, read
- 120 3.98 get saturation, read
- 121 3.99 get scan/orientation configuration , read
- 122 3.100 get sharpness, read
- 123 3.101 get shutter status, read
- 124 3.102 get soft edge black level, read
- 125 3.103 get soft edge size black level bottom, read
- 126 3.104 get soft edge size black level left, read
- 127 3.105 get soft edge size black level right, read
- 128 3.106 get soft edge size black level top, read
- 129 3.107 get soft edge size bottom, read
- 130 3.108 get soft edge size left, read
- 131 3.109 get soft edge size right, read
- 132 3.110 get soft edge size top, read
- 133 3.111 get soft edge status, read
- 134 3.112 get source, read
- 135 3.113 get source extended, read
- 138 3.114 get text on, read
- 139 3.115 get tint, read
- 140 3.116 get warp axis position, read
- 141 3.117 get warp file, read
- 142 3.118 get warp grid size, read
- 143 3.119 get warp hierarchic keystone in X direction, read
- 144 3.120 get warp hierarchic keystone in Y direction, read
- 145 3.121 get warp hierarchic linearity in X direction, read
- 146 3.122 get warp hierarchic linearity in Y direction, read
- 147 3.123 get warp hierarchic point shift, read
- 148 3.124 get warp keystone horizontal. Deprecated from version 1.6, read
- 149 3.125 get warp keystone vertical. Deprecated from version 1.6, read
- 150 3.126 get warp line shift horizontal. Deprecated from version 1.6, read
- 151 3.127 get warp line shift vertical. Deprecated from version 1.6, read
- 152 3.128 get warp linearity horizontal. Deprecated from version 1.6, read
- 153 3.129 get warp linearity vertical. Deprecated from version 1.6, read
- 154 3.130 get warp pin barrel horizontal. Deprecated from version 1.6, read
- 155 3.131 get warp pin barrel vertical. Deprecated from version 1.6, read
- 156 3.132 get warp point shift. Deprecated from version 1.6, read
- 157 3.133 get warp rotation, read
- 158 3.134 get warp scale horizontal., read
- 159 3.135 get warp scale vertical., read
- 160 3.136 get warp shift horizontal, read
- 161 3.137 get warp shift vertical, read
- 162 3.138 get warp status, read
- 163 3.139 get warp X1. Deprecated from version 1.6, read
- 159 R5905447 COMMAND CATALOG
- 164 3.140 get warp X2. Deprecated from version 1.6, read
- 165 3.141 get warp X3. Deprecated from version 1.6, read
- 166 3.142 get warp X4. Deprecated from version 1.6, read
- 167 3.143 get warp Y1. Deprecated from version 1.6, read
- 168 3.144 get warp Y2. Deprecated from version 1.6, read
- 169 3.145 get warp Y3. Deprecated from version 1.6, read
- 170 3.146 get warp Y4. Deprecated from version 1.6, read
- 171 3.147 get window selection, read
- 172 3.148 increment blanking bottom, write
- 173 3.149 increment blanking left, write
- 174 3.150 increment blanking right, write
- 175 3.151 increment blanking top, write
- 176 3.152 increment brightness, write
- 177 3.153 increment color balance blue green, write
- 178 3.154 increment color balance red green, write
- 179 3.155 increment contrast, write
- 180 3.156 increment dimming value, write
- 181 3.157 increment gamma, write
- 182 3.158 increment input black balance, write
- 183 3.159 increment input white balance, write
- 184 3.160 increment phase, write
- 185 3.161 increment saturation, write
- 186 3.162 increment sharpness, write
- 187 3.163 increment shutter, write
- 188 3.164 increment tint, write
- 189 3.165 input format horizontal total possible, read
- 190 3.166 phase possible, read
- 191 3.167 read auto picture alignment configuration, read
- 192 3.168 read barscale position, read
- 193 3.169 read customer id, read
- 194 3.170 read date time, read
- 195 3.171 read DMX address, read
- 196 3.172 read DMX mode, read
- 197 3.173 read DMX universe, read
- 198 3.174 read gateway configuration, read
- 199 3.175 read global software version, read
- 200 3.176 read image load method, read
- 201 3.177 read infrared ports, read
- 202 3.178 read lamp CLO status, read
- 203 3.179 read lamp CLO target lumens, read
- 204 3.180 read lamp runtime, read
- 205 3.181 read language, read
- 206 3.182 read menu position, read
- 207 3.183 read network configuration, read
- 208 3.184 read panel size, read
- 209 3.185 read projector runtime, read
- 210 3.186 read projector serial number, read
- 211 3.187 read projector status, read
- 212 3.188 read wifi configuration, read
- 213 3.189 read wifi key Mgmt, read
- 214 3.190 read wifi scan, read
- 215 3.191 read wifi SSID, read
- 216 3.192 read wifi status, read
- 217 3.193 RS interface selection , read
- 218 3.194 RS interface selection , write
- 219 3.195 saturation possible, read
- 220 3.196 save current adjustments to a file, write
- 221 3.197 save custom settings, write
- 222 3.198 save image settings, write
- 223 3.199 select main window as prefix, write
- 224 3.200 select PIP window as prefix, write
- 225 3.201 select source 1 as prefix, write
- 226 3.202 select source 2 as prefix, write
- 227 3.203 select source 3 as prefix, write
- 228 3.204 select source 4 as prefix, write
- 229 3.205 select window, write
- 230 3.206 set aspect ratio file, write
- 231 3.207 set aspect ratio height, write
- 232 3.208 set aspect ratio width, write
- 233 3.209 set blanking bottom, write
- 234 3.210 set blanking left, write
- 235 3.211 set blanking right, write
- 236 3.212 set blanking top , write
- 237 3.213 set brightness, write
- 238 3.214 set clamp delay , write
- 239 3.215 set clamp width, write
- 235 R5905447 COMMAND CATALOG
- 240 3.216 set color balance blue green ratio, write
- 241 3.217 set color balance red green ratio, write
- 242 3.218 set color temperature, write
- 243 3.219 set contrast, write
- 244 3.220 set contrast enhancement, write
- 245 3.221 set dimming, write
- 246 3.222 set gamma, write
- 247 3.223 set input black balance, write
- 248 3.224 set input white balance, write
- 249 3.225 set intensity, write
- 250 3.226 set lamp status, write
- 251 3.227 set layout , write
- 252 3.228 set lcd backlight level, write
- 253 3.229 set lcd time out, write
- 254 3.230 set lens focus, write
- 255 3.231 set lens shift, write
- 256 3.232 set lens zoom, write
- 257 3.233 set lock, write
- 258 3.234 set no signal color logo, write
- 259 3.235 set no signal shutdown delay, write
- 260 3.236 set no signal shutdown status, write
- 261 3.237 set output window in native resolution, write
- 262 3.238 set output window parameters, write
- 263 3.239 set output window status, write
- 264 3.240 set P7 TCGD blue X, write
- 265 3.241 set P7 TCGD blue Y, write
- 266 3.242 set P7 TCGD cyan X, write
- 267 3.243 set P7 TCGD cyan Y, write
- 268 3.244 set P7 TCGD green X, write
- 269 3.245 set P7 TCGD green Y, write
- 270 3.246 set P7 TCGD magenta X, write
- 271 3.247 set P7 TCGD magenta Y, write
- 272 3.248 set P7 TCGD red X , write
- 273 3.249 set P7 TCGD red Y, write
- 274 3.250 set P7 TCGD selection, write
- 275 3.251 set P7 TCGD white X, write
- 276 3.252 set P7 TCGD white Y, write
- 277 3.253 set P7 TCGD yellow X, write
- 278 3.254 set P7 TCGD yellow Y, write
- 279 3.255 set phase, write
- 280 3.256 set same lens settings status, write
- 281 3.257 set saturation, write
- 282 3.258 set scan/orientation configuration, write
- 283 3.259 set sharpness, write
- 284 3.260 set shutter position, write
- 285 3.261 set soft edge black level, write
- 286 3.262 set soft edge size black level bottom, write
- 287 3.263 set soft edge size black level left, write
- 288 3.264 set soft edge size black level right, write
- 289 3.265 set soft edge size black level top, write
- 290 3.266 set soft edge size bottom, write
- 291 3.267 set soft edge size left, write
- 292 3.268 set soft edge size right , write
- 293 3.269 set soft edge size top , write
- 294 3.270 set soft edge status, write
- 295 3.271 set source , write
- 296 3.272 set source extended, write
- 298 3.273 set test pattern by name, write
- 299 3.274 set test pattern convergence, write
- 300 3.275 set test pattern convergence green blue, write
- 301 3.276 set test pattern convergence red blue, write
- 302 3.277 set test pattern convergence red green blue, write
- 303 3.278 set tint, write
- 304 3.279 set warp axis position, write
- 305 3.280 set warp file, write
- 306 3.281 set warp grid size, write
- 307 3.282 set warp hierarchic keystone in X direction, write
- 308 3.283 set warp hierarchic keystone in Y direction, write
- 309 3.284 set warp hierarchic linearity in X direction, write
- 310 3.285 set warp hierarchic linearity in Y direction, write
- 311 3.286 set warp hierarchic point shift, write
- 312 3.287 set warp keystone horizontal. Deprecated from version 1.6, write
- 313 3.288 set warp keystone vertical. Deprecated from version 1.6, write
- 314 3.289 set warp line shift horizontal. Deprecated from version 1.6, write
- 315 3.290 set warp line shift vertical. Deprecated from version 1.6, write
- 316 3.291 set warp linearity horizontal. Deprecated from version 1.6, write
- 312 R5905447 COMMAND CATALOG
- 317 3.292 set warp linearity vertical. Deprecated from version 1.6, write
- 318 3.293 set warp pin barrel horizontal. Deprecated from version 1.6, write
- 319 3.294 set warp pin barrel vertical. Deprecated from version 1.6, write
- 320 3.295 set warp point shift. Deprecated from version 1.6, write
- 321 3.296 set warp rotation, write
- 322 3.297 set warp scale horizontal, write
- 323 3.298 set warp scale vertical , write
- 324 3.299 set warp shift horizontal, write
- 325 3.300 set warp shift vertical, write
- 326 3.301 set warp status, write
- 327 3.302 set warp X1. Deprecated from version 1.6, write
- 328 3.303 set warp X2. Deprecated from version 1.6, write
- 329 3.304 set warp X3. Deprecated from version 1.6, write
- 330 3.305 set warp X4. Deprecated from version 1.6, write
- 331 3.306 set warp Y1. Deprecated from version 1.6, write
- 332 3.307 set warp Y2. Deprecated from version 1.6, write
- 333 3.308 set warp Y3. Deprecated from version 1.6, write
- 334 3.309 set warp Y4. Deprecated from version 1.6, write
- 335 3.310 sharpness possible, read
- 336 3.311 text off, write
- 337 3.312 text on, write
- 338 3.313 tint possible, read
- 339 3.314 unfreeze, write
- 340 3.315 warp file delete, write
- 341 3.316 warp file rename, write
- 342 3.317 write auto picture alignment configuration, write
- 343 3.318 write barscale position, write
- 344 3.319 write customer id, write
- 345 3.320 write DMX address, write
- 346 3.321 write DMX mode, write
- 347 3.322 write DMX universe, write
- 348 3.323 write gateway configuration, write
- 349 3.324 write infrared ports status, write
- 350 3.325 write lamp CLO status, write
- 351 3.326 write lamp CLO target lumens, write
- 352 3.327 write language, write
- 353 3.328 write menu position, write
- 354 3.329 write network configuration, write
- 355 3.330 write projector off, write
- 356 3.331 write projector on, write
- 357 3.332 write wifi configuration, write
- 358 3.333 write wifi key mgmt, write
- 359 3.334 write wifi scan, write
- 360 3.335 write wifi SSID , write
- 361 3.336 write wifi status, write
- 363 Index
- 358 R5905447 COMMAND CATALOG
- 366 get warp keystone horizontal. Deprecated from version
- 368 get warp line shift horizontal. Deprecated from version
- 369 get warp line shift vertical. Deprecated from version
- 366 get warp linearity vertical. Deprecated from version
- 366 get warp pin barrel horizontal. Deprecated from version
- 366 get warp pin barrel vertical. Deprecated from version
- 366 get warp point shift. Deprecated from version
- 366 get warp X1. Deprecated from version
- 366 R5905447 COMMAND CATALOG
- 366 get warp X2. Deprecated from version
- 367 get warp X3. Deprecated from version
- 368 get warp X4. Deprecated from version
- 369 get warp Y1. Deprecated from version
- 370 get warp Y2. Deprecated from version
- 366 get warp Y3. Deprecated from version
- 366 get warp Y4. Deprecated from version
- 366 R5905447 COMMAND CATALOG