3.61 get ext sharpness, read. Barco HDX-W14, HDX-W18, HDX-W12, HDX-W20 FLEX
Add to my manuals
370 Pages
advertisement
▼
Scroll to page 2
of 370
3. Commands
3.61 get ext sharpness, read
About this command
This command gets the ext sharpness value.
Request
Pos
0
1
Size
1
1
Name get adj ext adj sharpness
Description byte value known as "get adj ext" byte value known as "adj sharpness"
Response
Pos Size
0
1
2-5
1
1
4
Name get adj ext adj sharpness actual value
Description byte value known as "get adj ext" byte value known as "adj sharpness" actual value as DWORD
0x2b
0x05
Content get adj ext (hex) adj sharpness (hex)
6-9
10-13
14-17
4 minimum value
4 maximum value
4 step value minimum value as DWORD maximum value step value as DWORD
0x2b
0x05
Content get adj ext (hex) adj sharpness (hex)
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
R5905447 COMMAND CATALOG 08/06/2015 79
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 11 1. Introduction
- 12 About this document
- 13 2. The Barco Projection Protocol
- 14 The Barco Projection Protocol explained
- 17 Ethernet communication
- 19 RS232/RS422/USB-B communication
- 20 The command representation in this manual
- 21 3. Commands
- 23 3D dark time adjustment, read
- 24 3D dark time adjustment, write
- 25 3D Double/Tripple Flash limit, read
- 26 3D Double/Tripple Flash limit, write
- 27 3D field dominance, read
- 28 3D field dominance, write
- 29 3D L/R Output Reference Delay, read
- 30 3D L/R Output Reference Delay, write
- 31 3D mode, read
- 32 3.10 3D mode, write
- 33 3.11 3D status, read
- 34 3.12 3D status, write
- 35 3.13 3D Sync Loop status, read
- 36 3.14 3D Sync Loop status, write
- 37 3.15 brightness possible, read
- 38 3.16 clear test pattern, write
- 39 3.17 contrast possible, read
- 40 3.18 decrement blanking bottom, write
- 41 3.19 decrement blanking left, write
- 42 3.20 decrement blanking right, write
- 43 3.21 decrement blanking top, write
- 44 3.22 decrement brightness, write
- 45 3.23 decrement color balance blue green ratio, write
- 46 3.24 decrement color balance red green ratio, write
- 47 3.25 decrement contrast, write
- 48 3.26 decrement dimming value, write
- 49 3.27 decrement gamma, write
- 50 3.28 decrement input black balance , write
- 51 3.29 decrement input white balance , write
- 52 3.30 decrement phase, write
- 53 3.31 decrement saturation, write
- 54 3.32 decrement sharpness, write
- 55 3.33 decrement shutter, write
- 56 3.34 decrement tint, write
- 57 3.35 freeze, write
- 58 3.36 function read electronic convergence, read
- 59 3.37 function read input balance pattern status, read
- 60 3.38 function write electronic convergence , write
- 61 3.39 get aspect ratio file, read
- 62 3.40 get aspect ratio height, read
- 63 3.41 get aspect ratio width, read
- 64 3.42 get baudrate, read
- 65 3.43 get blanking bottom, read
- 66 3.44 get blanking left, read
- 67 3.45 get blanking right, read
- 68 3.46 get blanking top, read
- 69 3.47 get brightness, read
- 70 3.48 get clamp delay, read
- 71 3.49 get clamp width, read
- 72 3.50 get color balance blue green ratio, read
- 73 3.51 get color balance red green ratio, read
- 74 3.52 get color temperature, read
- 75 3.53 get common address, read
- 76 3.54 get contrast, read
- 77 3.55 get contrast enhancement, read
- 78 3.56 get dimming, read
- 79 3.57 get ext contrast, read
- 80 3.58 get ext contrast enhancement , read
- 81 3.59 get ext gamma, read
- 82 3.60 get ext phase, read
- 83 3.61 get ext sharpness, read
- 84 3.62 get freeze status, read
- 85 3.63 get gamma, read
- 81 R5905447 COMMAND CATALOG
- 86 3.64 get gamma (text value), read
- 87 3.65 get input black balance, read
- 88 3.66 get input white balance, read
- 89 3.67 get intensity, read
- 90 3.68 get ir hold off configuration, read
- 91 3.69 get lamp status, read
- 92 3.70 get lamp status, read
- 93 3.71 get layout, read
- 94 3.72 get lcd backlight level, read
- 95 3.73 get lcd time out, read
- 96 3.74 get lock, read
- 97 3.75 get no signal color logo, read
- 98 3.76 get no signal shutdown delay, read
- 99 3.77 get no signal shutdown status, read
- 100 3.78 get output window native resolution status, read
- 101 3.79 get output window parameters, read
- 102 3.80 get output window status, read
- 103 3.81 get P7 TCGD blue X, read
- 104 3.82 get P7 TCGD blue Y, read
- 105 3.83 get P7 TCGD cyan X, read
- 106 3.84 get P7 TCGD cyan Y, read
- 107 3.85 get P7 TCGD green Y, read
- 108 3.86 get P7 TCGD magenta X, read
- 109 3.87 get P7 TCGD magenta Y, read
- 110 3.88 get P7 TCGD red X, read
- 111 3.89 get P7 TCGD red Y, read
- 112 3.90 get P7 TCGD selection, read
- 113 3.91 get P7 TCGD white X, read
- 114 3.92 get P7 TCGD white Y, read
- 115 3.93 get P7 TCGD yellow X, read
- 116 3.94 get P7 TCGD yellow Y, read
- 117 3.95 get phase, read
- 118 3.96 get projector address, read
- 119 3.97 get same lens settings status, read
- 120 3.98 get saturation, read
- 121 3.99 get scan/orientation configuration , read
- 122 3.100 get sharpness, read
- 123 3.101 get shutter status, read
- 124 3.102 get soft edge black level, read
- 125 3.103 get soft edge size black level bottom, read
- 126 3.104 get soft edge size black level left, read
- 127 3.105 get soft edge size black level right, read
- 128 3.106 get soft edge size black level top, read
- 129 3.107 get soft edge size bottom, read
- 130 3.108 get soft edge size left, read
- 131 3.109 get soft edge size right, read
- 132 3.110 get soft edge size top, read
- 133 3.111 get soft edge status, read
- 134 3.112 get source, read
- 135 3.113 get source extended, read
- 138 3.114 get text on, read
- 139 3.115 get tint, read
- 140 3.116 get warp axis position, read
- 141 3.117 get warp file, read
- 142 3.118 get warp grid size, read
- 143 3.119 get warp hierarchic keystone in X direction, read
- 144 3.120 get warp hierarchic keystone in Y direction, read
- 145 3.121 get warp hierarchic linearity in X direction, read
- 146 3.122 get warp hierarchic linearity in Y direction, read
- 147 3.123 get warp hierarchic point shift, read
- 148 3.124 get warp keystone horizontal. Deprecated from version 1.6, read
- 149 3.125 get warp keystone vertical. Deprecated from version 1.6, read
- 150 3.126 get warp line shift horizontal. Deprecated from version 1.6, read
- 151 3.127 get warp line shift vertical. Deprecated from version 1.6, read
- 152 3.128 get warp linearity horizontal. Deprecated from version 1.6, read
- 153 3.129 get warp linearity vertical. Deprecated from version 1.6, read
- 154 3.130 get warp pin barrel horizontal. Deprecated from version 1.6, read
- 155 3.131 get warp pin barrel vertical. Deprecated from version 1.6, read
- 156 3.132 get warp point shift. Deprecated from version 1.6, read
- 157 3.133 get warp rotation, read
- 158 3.134 get warp scale horizontal., read
- 159 3.135 get warp scale vertical., read
- 160 3.136 get warp shift horizontal, read
- 161 3.137 get warp shift vertical, read
- 162 3.138 get warp status, read
- 163 3.139 get warp X1. Deprecated from version 1.6, read
- 159 R5905447 COMMAND CATALOG
- 164 3.140 get warp X2. Deprecated from version 1.6, read
- 165 3.141 get warp X3. Deprecated from version 1.6, read
- 166 3.142 get warp X4. Deprecated from version 1.6, read
- 167 3.143 get warp Y1. Deprecated from version 1.6, read
- 168 3.144 get warp Y2. Deprecated from version 1.6, read
- 169 3.145 get warp Y3. Deprecated from version 1.6, read
- 170 3.146 get warp Y4. Deprecated from version 1.6, read
- 171 3.147 get window selection, read
- 172 3.148 increment blanking bottom, write
- 173 3.149 increment blanking left, write
- 174 3.150 increment blanking right, write
- 175 3.151 increment blanking top, write
- 176 3.152 increment brightness, write
- 177 3.153 increment color balance blue green, write
- 178 3.154 increment color balance red green, write
- 179 3.155 increment contrast, write
- 180 3.156 increment dimming value, write
- 181 3.157 increment gamma, write
- 182 3.158 increment input black balance, write
- 183 3.159 increment input white balance, write
- 184 3.160 increment phase, write
- 185 3.161 increment saturation, write
- 186 3.162 increment sharpness, write
- 187 3.163 increment shutter, write
- 188 3.164 increment tint, write
- 189 3.165 input format horizontal total possible, read
- 190 3.166 phase possible, read
- 191 3.167 read auto picture alignment configuration, read
- 192 3.168 read barscale position, read
- 193 3.169 read customer id, read
- 194 3.170 read date time, read
- 195 3.171 read DMX address, read
- 196 3.172 read DMX mode, read
- 197 3.173 read DMX universe, read
- 198 3.174 read gateway configuration, read
- 199 3.175 read global software version, read
- 200 3.176 read image load method, read
- 201 3.177 read infrared ports, read
- 202 3.178 read lamp CLO status, read
- 203 3.179 read lamp CLO target lumens, read
- 204 3.180 read lamp runtime, read
- 205 3.181 read language, read
- 206 3.182 read menu position, read
- 207 3.183 read network configuration, read
- 208 3.184 read panel size, read
- 209 3.185 read projector runtime, read
- 210 3.186 read projector serial number, read
- 211 3.187 read projector status, read
- 212 3.188 read wifi configuration, read
- 213 3.189 read wifi key Mgmt, read
- 214 3.190 read wifi scan, read
- 215 3.191 read wifi SSID, read
- 216 3.192 read wifi status, read
- 217 3.193 RS interface selection , read
- 218 3.194 RS interface selection , write
- 219 3.195 saturation possible, read
- 220 3.196 save current adjustments to a file, write
- 221 3.197 save custom settings, write
- 222 3.198 save image settings, write
- 223 3.199 select main window as prefix, write
- 224 3.200 select PIP window as prefix, write
- 225 3.201 select source 1 as prefix, write
- 226 3.202 select source 2 as prefix, write
- 227 3.203 select source 3 as prefix, write
- 228 3.204 select source 4 as prefix, write
- 229 3.205 select window, write
- 230 3.206 set aspect ratio file, write
- 231 3.207 set aspect ratio height, write
- 232 3.208 set aspect ratio width, write
- 233 3.209 set blanking bottom, write
- 234 3.210 set blanking left, write
- 235 3.211 set blanking right, write
- 236 3.212 set blanking top , write
- 237 3.213 set brightness, write
- 238 3.214 set clamp delay , write
- 239 3.215 set clamp width, write
- 235 R5905447 COMMAND CATALOG
- 240 3.216 set color balance blue green ratio, write
- 241 3.217 set color balance red green ratio, write
- 242 3.218 set color temperature, write
- 243 3.219 set contrast, write
- 244 3.220 set contrast enhancement, write
- 245 3.221 set dimming, write
- 246 3.222 set gamma, write
- 247 3.223 set input black balance, write
- 248 3.224 set input white balance, write
- 249 3.225 set intensity, write
- 250 3.226 set lamp status, write
- 251 3.227 set layout , write
- 252 3.228 set lcd backlight level, write
- 253 3.229 set lcd time out, write
- 254 3.230 set lens focus, write
- 255 3.231 set lens shift, write
- 256 3.232 set lens zoom, write
- 257 3.233 set lock, write
- 258 3.234 set no signal color logo, write
- 259 3.235 set no signal shutdown delay, write
- 260 3.236 set no signal shutdown status, write
- 261 3.237 set output window in native resolution, write
- 262 3.238 set output window parameters, write
- 263 3.239 set output window status, write
- 264 3.240 set P7 TCGD blue X, write
- 265 3.241 set P7 TCGD blue Y, write
- 266 3.242 set P7 TCGD cyan X, write
- 267 3.243 set P7 TCGD cyan Y, write
- 268 3.244 set P7 TCGD green X, write
- 269 3.245 set P7 TCGD green Y, write
- 270 3.246 set P7 TCGD magenta X, write
- 271 3.247 set P7 TCGD magenta Y, write
- 272 3.248 set P7 TCGD red X , write
- 273 3.249 set P7 TCGD red Y, write
- 274 3.250 set P7 TCGD selection, write
- 275 3.251 set P7 TCGD white X, write
- 276 3.252 set P7 TCGD white Y, write
- 277 3.253 set P7 TCGD yellow X, write
- 278 3.254 set P7 TCGD yellow Y, write
- 279 3.255 set phase, write
- 280 3.256 set same lens settings status, write
- 281 3.257 set saturation, write
- 282 3.258 set scan/orientation configuration, write
- 283 3.259 set sharpness, write
- 284 3.260 set shutter position, write
- 285 3.261 set soft edge black level, write
- 286 3.262 set soft edge size black level bottom, write
- 287 3.263 set soft edge size black level left, write
- 288 3.264 set soft edge size black level right, write
- 289 3.265 set soft edge size black level top, write
- 290 3.266 set soft edge size bottom, write
- 291 3.267 set soft edge size left, write
- 292 3.268 set soft edge size right , write
- 293 3.269 set soft edge size top , write
- 294 3.270 set soft edge status, write
- 295 3.271 set source , write
- 296 3.272 set source extended, write
- 298 3.273 set test pattern by name, write
- 299 3.274 set test pattern convergence, write
- 300 3.275 set test pattern convergence green blue, write
- 301 3.276 set test pattern convergence red blue, write
- 302 3.277 set test pattern convergence red green blue, write
- 303 3.278 set tint, write
- 304 3.279 set warp axis position, write
- 305 3.280 set warp file, write
- 306 3.281 set warp grid size, write
- 307 3.282 set warp hierarchic keystone in X direction, write
- 308 3.283 set warp hierarchic keystone in Y direction, write
- 309 3.284 set warp hierarchic linearity in X direction, write
- 310 3.285 set warp hierarchic linearity in Y direction, write
- 311 3.286 set warp hierarchic point shift, write
- 312 3.287 set warp keystone horizontal. Deprecated from version 1.6, write
- 313 3.288 set warp keystone vertical. Deprecated from version 1.6, write
- 314 3.289 set warp line shift horizontal. Deprecated from version 1.6, write
- 315 3.290 set warp line shift vertical. Deprecated from version 1.6, write
- 316 3.291 set warp linearity horizontal. Deprecated from version 1.6, write
- 312 R5905447 COMMAND CATALOG
- 317 3.292 set warp linearity vertical. Deprecated from version 1.6, write
- 318 3.293 set warp pin barrel horizontal. Deprecated from version 1.6, write
- 319 3.294 set warp pin barrel vertical. Deprecated from version 1.6, write
- 320 3.295 set warp point shift. Deprecated from version 1.6, write
- 321 3.296 set warp rotation, write
- 322 3.297 set warp scale horizontal, write
- 323 3.298 set warp scale vertical , write
- 324 3.299 set warp shift horizontal, write
- 325 3.300 set warp shift vertical, write
- 326 3.301 set warp status, write
- 327 3.302 set warp X1. Deprecated from version 1.6, write
- 328 3.303 set warp X2. Deprecated from version 1.6, write
- 329 3.304 set warp X3. Deprecated from version 1.6, write
- 330 3.305 set warp X4. Deprecated from version 1.6, write
- 331 3.306 set warp Y1. Deprecated from version 1.6, write
- 332 3.307 set warp Y2. Deprecated from version 1.6, write
- 333 3.308 set warp Y3. Deprecated from version 1.6, write
- 334 3.309 set warp Y4. Deprecated from version 1.6, write
- 335 3.310 sharpness possible, read
- 336 3.311 text off, write
- 337 3.312 text on, write
- 338 3.313 tint possible, read
- 339 3.314 unfreeze, write
- 340 3.315 warp file delete, write
- 341 3.316 warp file rename, write
- 342 3.317 write auto picture alignment configuration, write
- 343 3.318 write barscale position, write
- 344 3.319 write customer id, write
- 345 3.320 write DMX address, write
- 346 3.321 write DMX mode, write
- 347 3.322 write DMX universe, write
- 348 3.323 write gateway configuration, write
- 349 3.324 write infrared ports status, write
- 350 3.325 write lamp CLO status, write
- 351 3.326 write lamp CLO target lumens, write
- 352 3.327 write language, write
- 353 3.328 write menu position, write
- 354 3.329 write network configuration, write
- 355 3.330 write projector off, write
- 356 3.331 write projector on, write
- 357 3.332 write wifi configuration, write
- 358 3.333 write wifi key mgmt, write
- 359 3.334 write wifi scan, write
- 360 3.335 write wifi SSID , write
- 361 3.336 write wifi status, write
- 363 Index
- 358 R5905447 COMMAND CATALOG
- 366 get warp keystone horizontal. Deprecated from version
- 368 get warp line shift horizontal. Deprecated from version
- 369 get warp line shift vertical. Deprecated from version
- 366 get warp linearity vertical. Deprecated from version
- 366 get warp pin barrel horizontal. Deprecated from version
- 366 get warp pin barrel vertical. Deprecated from version
- 366 get warp point shift. Deprecated from version
- 366 get warp X1. Deprecated from version
- 366 R5905447 COMMAND CATALOG
- 366 get warp X2. Deprecated from version
- 367 get warp X3. Deprecated from version
- 368 get warp X4. Deprecated from version
- 369 get warp Y1. Deprecated from version
- 370 get warp Y2. Deprecated from version
- 366 get warp Y3. Deprecated from version
- 366 get warp Y4. Deprecated from version
- 366 R5905447 COMMAND CATALOG