Biostar Hi-Fi H61S3L Owner's Manual

H i - F i H 6 1 S 3 / H i - F i H 6 1 S3 L / H i - F i H 6 1 S 3 D S e t up M a n u a l

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and we will not be responsible for any mistakes found in this user’s manual. All the brand and product names are trademarks of their respective companies.

Dichiarazione di conformità sintetica

Ai sensi dell’art. 2 comma 3 del D.M.

275 del 30/10/2002

Si dichiara che questo prodotto è conforme alle normative vigenti e soddisfa i requisiti essenziali richiesti dalle direttive

2004/108/CE, 2006/95/CE e

1999/05/CE quando ad esso applicabili

Short Declaration of conformity

We declare this product is complying with the laws in force and meeting all the essential requirements as specified by the directives

2004/108/CE, 2006/95/CE and

1999/05/CE whenever these laws may be applied

Table of Contents

Chapter 1: Introduction.......................................... 1

1.1

Before You Start.........................................................................................1

1.2

Package Checklist .....................................................................................1

1.3

Motherboard Features..............................................................................2

1.4

Rear Panel Connectors..............................................................................3

1.5

Motherboard Layout.................................................................................4

Chapter 2: Hardware Installation ........................... 5

2.1

Installing Central Processing Unit (CPU) ...............................................5

2.2

Install a Heatsink ......................................................................................7

2.3

FAN Headers..............................................................................................8

2.4

Installing System Memory ........................................................................9

2.5

Connectors and Slots................................................................................10

Chapter 3: Headers & Jumpers Setup ................... 13

3.1

How to Setup Jumpers ............................................................................13

3.2

Detail Settings..........................................................................................13

Chapter 4: Useful Help ......................................... 16

4.1

Driver Installation Note..........................................................................16

4.2

Software....................................................................................................17

4.3

BIOS Update.............................................................................................20

4.4

AMI BIOS Beep Code ...............................................................................25

4.5

Troubleshooting .......................................................................................25

Appendix: SPEC In Other Languages .................... 28

German .................................................................................................................28

French....................................................................................................................30

Italian ....................................................................................................................32

Spanish ..................................................................................................................34

Portuguese............................................................................................................36

Polish .....................................................................................................................38

Russian ..................................................................................................................40

Arabic ....................................................................................................................42

Japanese................................................................................................................44

Hi-Fi H61S3/Hi-Fi H61S3L/Hi-Fi H61S3D

CHAPTER 1: INTRODUCTION

1.1 B

EFORE

Y

OU

S

TART

Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below:

Prepare a dry and stable working environment with sufficient lighting.

Always disconnect the computer from power outlet before operation.

Before you take the motherboard out from anti-static bag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge.

Avoid touching the components on motherboard or the rear side of the board unless necessary. Hold the board on the edge, do not try to bend or flex the board.

Do not leave any unfastened small parts inside the case after installation. Loose parts will cause short circuits which may damage the equipment.

Keep the computer from dangerous area, such as heat source, humid air and water.

The operating temperatures of the computer should be 0 to

45 degrees Celsius.

To avoid injury, be careful of:

Sharp pins on headers and connectors

Rough edges and sharp corners on the chassis

Damage to wires that could cause a short circuit

1.2 P

ACKAGE

C

HECKLIST

; Serial ATA Cable x2

; Rear I/O Panel for ATX Case x1

; Installation Guide x1

; Fully Setup Driver DVD x1

Note: The package contents may be different due to the sales region or models in which it was sold. For more information about the standard package in your region, please contact your dealer or sales representative.

1

Motherboard Manual

1.3 M

OTHERBOARD

F

EATURES

SPEC

CPU

Super I/O

Main

Memory

SATA 2

Socket 1155

Intel Core i7 / i5 / i3 / Pentium / Celeron processor

IT8772E-EX

Provides the most commonly used legacy

Super I/O functionality

Low Pin Count Interface

DDR3 DIMM Slots x 2

Max Memory Capacity 16GB

Each DIMM supports 512MB/

1GB/2GB/4GB/8GB DDR3

Integrated Serial ATA Controller

LAN

RTL8111F (Hi-Fi H61S3, Hi-Fi H61S3D)

RTL8105E (Hi-Fi H61S3L)

Sound

Codec

ALC662

Slots

PCI-E Gen3x16 slot

(depending on CPU)

PCI-E Gen2 x1 slot

SATA2 Connector

Front Panel Connector

Front Audio Connector

CPU Fan Header

System Fan Header

On Board

Connectors

Clear CMOS Header

USB2.0 Connector x1 x1 x1 x1 x2 x2 x4 x1 x1

Supports Execute Disable Bit / Enhanced Intel

SpeedStep® / Intel Architecture-64 / Extended

Memory 64 Technology / Virtualization Technology /

Hyper Threading

Environment Control initiatives

Hardware Monitor Controller

Fan Speed Controller

ITE's "Smart Guardian" function

Dual Channel Mode DDR3 memory module

Supports DDR3 1066 / 1333

Supports DDR3 1600 (depending on CPU)

Registered DIMM and ECC DIMM is not supported

Data transfer rates up to 3.0 Gb/s

SATA Version 2.0 specification compliant

10 / 100 / 1000Mb/s auto negotiation

10 / 100 Mb/s auto negotiation

5.1 channels audio out

High Definition Audio, Biostar Hi-Fi

Supports PCI-E Gen2/3 x16 expansion card

Supports PCI-E Gen2 x1 expansion card

Each connector supports 1 SATA2 device

Supports front panel facilities

Supports front panel audio function

CPU Fan power supply (with Smart Fan function)

System Fan Power supply

Restore CMOS data to factory default

Each connector supports 2 front panel USB2.0 ports

Rear Panel

I/O

Serial Port Connector

Power Connector (24pin)

Power Connector (4pin)

PS/2 Keyboard

PS/2 Mouse

HDMI Port (Hi-Fi H61S3)

DVI Port (Hi-Fi H61S3D)

VGA Port

LAN port

USB2.0 Port

Audio Jack x1 x1 x1 x1 x1 x4 x3 x1 x1 x1 x1

Connects to RS-232 Port

Connects to Power supply

Connects to Power supply

Connects to PS/2 Keyboard

Connects to PS/2 Mouse

Connects to HDMI Display

Connects to DVI Display

Connect to D-SUB monitor

Connect to RJ-45 Ethernet cable

Connect to USB2.0 devices

Provide Audio-In/Out and Mic. Connection

2

Board Size 170 (W) x 235 (L) mm


OS Support Windows XP / Vista / 7 / 8

SPEC

Biostar reserves the right to add or remove support for any OS with or without notice

1.4 R

EAR

P

ANEL

C

ONNECTORS

Hi-Fi H61S3

Hi-Fi H61S3D

Hi-Fi H61S3L

NOTE: z HDMI/ DVI/VGA Output require an Intel Core family processor with Intel Graphics Technology. z Maximum

VGA: 2048 x 1536 @75Hz z

DVI: 1920 x 1200 @60Hz (for Hi-Fi H61S3D only)

HDMI: 1920 x 1200 @60Hz (for Hi-Fi H61S3 only)

The Hi-Fi H61S3 & Hi-Fi H61S3D support dual video outputs, but the HDMI is not supported under DOS and BIOS setup.

3

Motherboard Manual

1.5 M

OTHERBOARD

L

AYOUT

4

Note1: ■ represents the 1st pin.


CHAPTER 2: HARDWARE INSTALLATION

2.1 I

NSTALLING

C

ENTRAL

P

ROCESSING

U

NIT

(CPU)

Step 1: Locate the CPU socket on the motherboard

Note1: Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be damaged.

Note2: The motherboard might equip with two different types of pin cap. Please refer below instruction to remove the pin cap.

Step 2: Pull the socket locking lever out from the socket and then raise the lever up.

Step 3: Remove the Pin Cap.

5

Motherboard Manual

Step 4: Hold processor with your thumb and index fingers, oriented as shown.

Align the notches with the socket. Lower the processor straight down without tilting or sliding the processor in the socket.

Note: The CPU fits only in one correct orientation. Do not force the CPU into the socket to prevent damaging the CPU.

Step 5: Hold the CPU down firmly, and then lower the lever to locked position to complete the installation.

6


2.2 I

NSTALL A

H

EATSINK

Step 1: Place the CPU fan assembly on top of the installed CPU and make sure that the four fasteners match the motherboard holes. Orient the assembly and make the fan cable is closest to the CPU fan connector.

Step 2: Press down two fasteners at one time in a diagonal sequence to secure the CPU fan assembly in place. Ensure that all four fasteners are secured.

Note1: Do not forget to connect the CPU fan connector.

Note2: For proper installation, please kindly refer to the installation manual of your CPU heatsink.

7

Motherboard Manual

2.3 FAN H

EADERS

These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to pin#1.

CPU_FAN1: CPU Fan Header

Pin Assignment

1 Ground

2 +12V

3 FAN RPM rate sense

4 Smart Fan Control

(By Fan)

SYS_FAN1: System Fan Header

Pin Assignment

1 Ground

2 +12V

3 FAN RPM rate sense

Note: CPU_FAN1, SYS_FAN1 support 4-pin and 3-pin head connectors. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin#2, and the black wire is Ground and should be connected to GND.

8


2.4 I

NSTALLING

S

YSTEM

M

EMORY

A. Memory Modules

Step 1: Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot.

Step 2: Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.

Note: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.

9

Motherboard Manual

B. Memory Capacity

DIMM Socket

Location

DDR3 Module

DDR3_A1 512MB/1GB/2GB/4GB/8GB

DDR3_B1 512MB/1GB/2GB/4GB/8GB

Total Memory

Size

Max is 16GB.

C. Dual Channel Memory Installation

Please refer to the following requirements to activate Dual Channel function:

Install memory module of the same density in pairs, shown in the table.

Dual Channel Status DDR3_A1

Disabled O

DDR3_B1

X

Disabled X O

Enabled O O

(O means memory installed; X, not installed.)

Note: The DRAM bus width of the memory module must be the same (x8 or x16)

2.5 C

ONNECTORS AND

S

LOTS

SATA1~SATA4: Serial ATA Connectors

These connectors connect to SATA hard disk drives via SATA cables.

Those satisfy the SATA 2.0 spec and with transfer rate of 3.0Gb/s.

Pin Assignment

1 Ground

2 TX+

3 TX-

4 Ground

5 RX-

6 RX+

7 Ground

10


ATXPWR2: ATX Power Source Connector

This connector provides +12V to CPU power circuit.

Pin Assignment

1 +12V

2 +12V

3 Ground

4 Ground

ATXPWR1: ATX Power Source Connector

This connector allows user to connect 24-pin power connector on the ATX power supply.

Pin Assignment

13 +3.3V

14 -12V

15 Ground

16 PS_ON

17 Ground

18 Ground

19 Ground

20 NC

21 +5V

22 +5V

23 +5V

24 Ground

1 +3.3V

2 +3.3V

3 Ground

4 +5V

5 Ground

6 +5V

7 Ground

8 PW_OK

11 +12V

Note1: Before you power on the system, please make sure that both ATXPWR1 and

ATXPWR2 connectors have been plugged-in.

Note2: Insufficient power supplied to the system may result in instability or the peripherals not functioning properly. Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices.

11

Motherboard Manual

PEX16_1: PCI-Express Gen3 x16 Slot

-

-

-

PCI-Express 3.0 compliant.

Maximum theoretical realized bandwidth of 16GB/s simultaneously per direction, for an aggregate of 32GB/s totally.

PCI-E 3.0 is supported by Core i7-3xxx / i5-3xxx CPU.

PEX1_1/PEX1_2: PCI-Express Gen2 x1 Slots

-

-

PCI-Express 2.0 compliant.

Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total.

Install an Expansion Card

You can install your expansion card by following steps:

1.

2.

3.

4.

Read the related expansion card's instruction document before install the expansion card into the computer.

Remove your computer's chassis cover, screws and slot bracket from the computer.

Place a card in the expansion slot and press down on the card until it is completely seated in the slot.

Secure the card’s metal bracket to the chassis back panel with a screw.

5.

6.

7.

Replace your computer's chassis cover.

Power on the computer, if necessary, change BIOS settings for the expansion card.

Install related driver for the expansion card.

12


CHAPTER 3: HEADERS & JUMPERS SETUP

3.1 H

OW TO

S

ETUP

J

UMPERS

The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is

“open”.

3.2 D

ETAIL

S

ETTINGS

PANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.

1 +5V

2 N/A

3 N/A

4 Speaker

5 HDD LED (+)

6 HDD LED (-)

7 Ground

Speaker

Connector

Hard drive

LED

Reset button

12

13

14

15

16

9 N/A

10 N/A

11

Assignment Function

N/A

N/A

N/A

Power LED (+)

Power LED (+)

Power LED (-)

Power LED

Ground

Power-on button

13

Motherboard Manual

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel

These headers allow users to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader.

Pin Assignment

3 USB-

4 USB-

5 USB+

6 USB+

7 Ground

8 Ground

9 Key

10 NC

F_AUDIO1: Front Panel Audio Header

This header allows users to connect the front audio output cable with the PC front panel.

HD Audio AC’97

Pin Assignment Pin Assignment

1 Mic Left in

2 Ground

3 Mic Right in

4 GPIO

5 Right line in

1

5

Mic In

2 Ground

3 Mic Power

RT Line Out

Sense

8 Key

9

10

Left line in

Jack Sense

7 Reserved

8 Key

9 LFT Line Out

10 LFT Line Out

Note1: It is recommended that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high definition audio capability.

Note2: Please try to disable the "Front Panel Jack Detection" if you want to use an AC'97 front audio output cable. The function can be found via O.S. Audio Utility.

14


J_COM1: Serial Port Connector

The motherboard has a Serial Port Connector for connecting RS-232 Port.

Pin

3

4

1

2

5

6

7

Assignment

Carrier detect

Received data

Transmitted data

Data terminal ready

Signal ground

Data set ready

Request to send

10 NC

JCMOS1: Clear CMOS Header

Placing the jumper on pin2-3 allows users to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard.

1 3

Pin 1-2 Close:

Normal Operation (default).

1 3

Pin 2-3 Close:

Clear CMOS data.

※

Clear CMOS Procedures:

1.

2.

3.

4.

5.

6.

Remove AC power line.

Set the jumper to “Pin 2-3 close”.

Wait for five seconds.

Set the jumper to “Pin 1-2 close”.

Power on the AC.

Load Optimal Defaults and save settings in CMOS.

15

Motherboard Manual

CHAPTER 4: USEFUL HELP

4.1 D

RIVER

I

NSTALLATION

N

OTE

After you installed your operating system, please insert the Fully Setup

Driver DVD into your optical drive and install the driver for better system performance.

You will see the following window after you insert the DVD

The setup guide will auto detect your motherboard and operating system.

Note: If this window didn’t show up after you insert the Driver DVD, please use file browser to locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation

To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system.

Click on each device driver to launch the installation program.

B. Software Installation

To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program.

C. Manual

Aside from the paperback manual, we also provide manual in the Driver

DVD. Click on the Manual icon to browse for available manual.

Note: You will need Acrobat Reader to open the manual file. Please download the latest version of Acrobat Reader software from http://get.adobe.com/reader/

16


4.2 S

OFTWARE

Installing Software

1. Insert the Setup DVD to the optical drive. The drivers installation program would appear if the Autorun function has been enabled.

2. Select title.

3. Follow the on-screen instructions to complete the installation.

Launching Software

After the installation process, you will see the software icon “eHOT Line” /

“BIOS Update” appears on the desktop. Double-click the icon to launch the utility.

eHot-Line (Optional)

eHot-Line is a convenient utility that helps you to contact with our

Tech-Support system. This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem.

Before you use this utility, please set Outlook Express as your default e-mail client application program.

* must provide. Without this information, you may not be able to send out the mail.

This block will show the information which would be collected in the mail.

* Describe condition of your system.

* Select your area or the area close to you.

Provide the e-mail address that you would like to send the copy to.

* Provide the name of the memory module manufacturer.

Send the mail out.

Exit this dialog.

Save these information to a .txt file

Provide the name of the power supply manufacturer and the model no.

17

Motherboard Manual

After filling up this information, click “Send” to send the mail out. A warning dialog would appear asking for your confirmation; click

“Send” to confirm or “Do Not Send” to cancel.

If you want to save this information to a .txt file, click “Save As…” and then you will see a saving dialog appears asking you to enter file name.

Enter the file name and then click

“Save”. Your system information will be saved to a .txt file.

Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in the sent mail.

Note1: We will not share customer’s data with any other third parties, so please feel free to provide your system information while using eHot-Line service.

Note2: If you are not using Outlook Express as your default e-mail client application, you may need to save the system information to a .txt file and send the file to our tech support with other e-mail application. Go to the following web http://www.biostar.com.tw/app/en/about/contact.php

for getting our contact information.

18


Smart EAR

Smart EAR is a windows-based audio utility which allows you to easily adjust system volume. With its user-friendly GUI, you can also adjust impedance setting (Low/High Gain) to optimize your headphone performance. z High/Low Gain Switch: Keep the gain switch to low for low impedance headphone and set to high for high impedance headphone. z Mute Button: To disable system sound z Volume Control Knob: The volume can be finely adjusted by turning the knob either clockwise or anti-clockwise to increase or decrease system volume accordingly. z Information Button: Get information of the application z Minimize Button: Minimize the application window to the taskbar z Exit Button: Exit the application

Note:

1. Smart EAR is only supported by Windows 7/8 and BIOSTAR Hi-Fi series motherboards.

2. High/Low Gain Switch is only for “Front Panel Audio Header”, please make sure you are connecting your headphone to the front panel I/O.

19

Motherboard Manual

4.3 BIOS U

PDATE

There are three ways to update the BIOS: BIOS Update Utility, BIOS Online

Update Utility and BIOSTAR BIOS Flasher.

Note: The programming procedure may take minutes, please do not make any operation during the programming process.

1. BIOS Update Utility

1. Installing BIOS Update Utility from the DVD Driver.

2. Download the proper BIOS from www.biostar.com.tw

.

3. Open BIOS Update Utility and click the Update BIOS button on the main screen.

4. A warning message will show up to request your agreement to start the BIOS update. Click OK to start the update procedure.

5. Choose the location for your

BIOS file in the system. Please select the proper BIOS file, and then click on Open. It will take several minutes, please be patient.

6. After the BIOS Update process is finished, click on OK to reboot the system.

20


7. While the system boots up and the full screen logo shows up, please press the <Delete> key to enter BIOS setup.

After entering the BIOS setup, please go to the Save & Exit, using the Restore

Defaults function to load Optimized Defaults, and select Save Changes and

Reset to restart the computer. Then, the BIOS Update is completed.

Backup BIOS

Click the Backup BIOS button on the main screen for the backup of BIOS, and select a proper location for your backup BIOS file in the system, and click Save.

2. Online Update Utility

1. Installing BIOS Update Utility from the DVD Driver.

2. Please make sure the system is connected to the internet before using this function.

3. Open BIOS Update Utility and click the Online Update button on the main screen.

4. An open dialog will show up to request your agreement to start the BIOS update. Click

Yes to start the online update procedure.

21

Motherboard Manual

5. If there is a new BIOS version, the utility will ask you to download it. Click Yes to proceed.

6. After the download is completed, you will be asked to program (update) the BIOS or not. Click Yes to proceed.

7. After the updating process is finished, you will be asked you to reboot the system. Click OK to reboot.

8. While the system boots up and the full screen logo shows up, press

<Delete> key to enter BIOS setup.




22


3. BIOSTAR BIOS Flasher

BIOSTAR BIOS Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive.

Note1: This utility only allows storage device with FAT32/16 format and single partition.

Note2: Shutting down or resetting the system while updating the BIOS will lead to system boot failure.

The BIOSTAR BIOS Flasher is built in the BIOS ROM. To enter the utility, press

<F12> during the Power-On Self Tests (POST) procedure while booting up.

Updating BIOS with BIOSTAR BIOS Flasher

1. Go to the website to download the latest BIOS file for the motherboard.

2. Then, copy and save the BIOS file into a USB flash (pen) drive.

3. Insert the USB pen drive that contains the BIOS file to the USB port.

4. Power on or reset the computer and then press <F12> during the POST process.

5. After entering the POST screen, the BIOS-FLASHER utility pops out. Choose [fs0] to search for the BIOS file.

6. Select the proper BIOS file, and a message asking if you are sure to flash the BIOS file.

Click Yes to start updating

BIOS.

23

Motherboard Manual

7. A dialog pops out after BIOS flash is completed, asking you to restart the system. Press the

[Y] key to restart system.

8. While the system boots up and the full screen logo shows up, press

<Delete> key to enter BIOS setup.




24


4.4 AMI BIOS B

EEP

C

ODE

Boot Block Beep Codes

Number of Beeps

Continuing

Description

Memory sizing error or Memory module not found

POST BIOS Beep Codes

Number of Beeps Description

8 Display memory error (system video adapter)

4.5 T

ROUBLESHOOTING

Probable Solution

1. There is no power in the system.

Power LED does not shine; the fan of the power supply does not work

2. Indicator light on keyboard does not shine.

1. Make sure power cable is securely plugged in.

3. Contact technical support.

System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running.

System does not boot from a hard disk drive, but can be booted from optical drive.

System only boots from an optical drive.

Hard disks can be read, applications can be used, but system fails to boot from a hard disk.

Using even pressure on both ends of the DIMM, press down firmly until the module snaps into place.

1. Check cable running from disk to disk controller board. Make sure both ends are securely plugged in; check the drive type in the standard CMOS setup.

2. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time.

1. Back up data and applications files.

2. Reformat the hard drive.

Re-install applications and data using backup disks.

Screen message shows “Invalid

Configuration” or “CMOS Failure.”

Review system’s equipment. Make sure correct information is in setup.

System cannot boot after the user installs a second hard drive.

1. Set master/slave jumpers correctly.

2. Run SETUP program and select correct drive types. Call the drive manufacturers for compatibility with other drives.

25

Motherboard Manual

CPU Overheated

If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection function.

1. Remove the power cord from power supply for seconds.

2. Wait for seconds.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data.

(See “Close CMOS Header: JCMOS1” section)

2. Wait for seconds.

3. Power on the system again.

26


This Page Intentionally Left Blank

27

Motherboard Manual

APPENDIX: SPEC IN OTHER LANGUAGES

G

ERMAN

Spezifikationen

CPU

Socket 1155

Intel Core i7 / i5 / i3 / Pentium / Celeron

Prozessoren

Unterstützt Execute Disable Bit / Enhanced Intel



Hyper Threading

Chipsatz

Super E/A

Intel H61

IT8772E-EX Umgebungskontrolle,

Bietet die häufig verwendeten alten Super Hardware-Überwachung

E/A-Funktionen.

Low Pin Count-Schnittstelle

Lüfterdrehzahl-Controller/-Überwachung

"Smart Guardian"-Funktion von ITE

SATA 2

DDR3 DIMM-Steckplätze x 2

Arbeitsspeich Max. 16GB Arbeitsspeicher er Jeder DIMM unterstützt 512MB/

1GB/2GB/4GB/8GB DDR3.

Integrierter Serial ATA-Controller

Dual-Kanal DDR3 Speichermodul

Unterstützt DDR3 1066 / 1333 / 1600 registrierte DIMMs. ECC DIMMs werden nicht unterstützt.

Datentransferrate bis zu 3.0Gb/s

Konform mit der SATA-Spezifikation Version 2.0

10 / 100 / 1000Mb/s Auto-Negotiation

10 / 100 Mb/s Auto-Negotiation


LAN


HD

Audio-Unters ALC662 tützung x1

Steckplätze

PCI-E Gen3 x 16 Steckplatz

PCI-E Gen2 x1-Steckplatz

Onboard-Ans SATA2-Anschluss chluss

Fronttafelanschluss x2 x4 x1

Unterstützt High-Definition Audio

5.1-Kanal-Audioausgabe, Biostar Hi-Fi

(je nach CPU)

Jeder Anschluss unterstützt 1 SATA2-Laufwerk

Unterstützt die Fronttafelfunktionen

Front-Audioanschluss x1 Unterstützt die Fronttafel-Audioanschlussfunktion

CPU-Lüfterstromversorgungsanschluss (mit Smart

CPU-Lüfter-Sockel x1

Fan-Funktion)

28


Spezifikationen

"CMOS löschen"-Sockel

USB2.0-Anschluss

Serieller Anschluss

Stromanschluss (24-polig)

Stromanschluss (4-polig) x1 x2 x1 x1 x1

Jeder Anschluss unterstützt 2

Fronttafel-USB2.0-Anschlüsse

Rückseiten-E

/A

PS/2-Tastatur x1

PS/2-Maus x1

HDMI-Anschluss (Hi-Fi H61S3) x1

DVI-Anschluss (Hi-Fi H61S3D) x1

VGA-Anschluss x1

LAN-Anschluss x1

USB2.0-Anschluss x4

Audioanschluss x3

Platinengröße 170 mm (B) X 235 mm (L)

OS-Unterstüt zung

Windows XP / Vista / 7 / 8

Biostar behält sich das Recht vor, ohne Ankündigung die Unterstützung für ein Betriebssystem hinzuzufügen oder zu entfernen.

29

Motherboard Manual

F

RENCH

UC

SPEC

Socket 1155

Processeurs Intel Core i7 / i5 / i3 / Pentium / de désactivation / Intel SpeedStep® optimisée/ d'architecture Intel 64 / de mémoire étendue 64 / de

Celeron

Prend en charge les technologies d'exécution de bit virtualisation / Hyper Threading

Chipset Intel H61

IT8772E-EX

Super E/S

Fournit la fonctionnalité de Super E/S patrimoniales la plus utilisée.

Interface à faible compte de broches

Initiatives de contrôle environnementales,

Moniteur de matériel

Contrôleur /moniteur de vitesse de ventilateur

Fonction "Gardien intelligent" de l'ITE

Mémoire principale

Fentes DDR3 DIMM x 2

Capacité mémoire maximale de 16 Go

Module de mémoire DDR3 à mode à double voie

Prend en charge la DDR3 1066 / 1333 / 1600

Chaque DIMM prend en charge des DDR3 de Les DIMM à registres et DIMM avec code correcteurs

512Mo/1Go/2Go/4Go/8Go d'erreurs ne sont pas prises en charge

SATA 2 Contrôleur Serial ATA intégré

Taux de transfert jusqu'à 3.0Go/s.

Conforme à la spécification SATA Version 2.0

10 / 100 / 1000 Mb/s négociation automatique

10 / 100 Mb/s négociation automatique

LAN



Prise en charge audio HD

ALC662

Fentes

Fente PCI-E Gen3 x 16

Fente PCI-E Gen2 x1

Connecteur

Connecteur SATA2 embarqué x1 x2 x4

Prise en charge de l'audio haute définition

Sortie audio à 5.1 voies, Biostar Hi-Fi

(en fonction du CPU)

Chaque connecteur prend en charge 1 périphérique

SATA2

Connecteur du panneau avant x1

Connecteur Audio du panneau avant x1

Embase de ventilateur UC x1

Prend en charge les équipements du panneau avant

Prend en charge la fonction audio du panneau avant

Alimentation électrique du ventilateur UC (avec fonction de ventilateur intelligent)

30


SPEC

Embase de ventilateur système x1 Alimentation électrique du ventilateur système

Embase d'effacement CMOS x1

Connecteur USB2.0 x2

Chaque connecteur prend en charge 2 ports USB2.0 de panneau avant

Port série x1

Connecteur d'alimentation x1

(24 broches)

Connecteur d'alimentation

(4 broches) x1

Clavier PS/2

Souris PS/2

Port HDMI (Hi-Fi H61S3)

Port DVI (Hi-Fi H61S3D)

E/S du panneau arrière

Port VGA

Port LAN

Port USB2.0

Fiche audio

Dimensions

170 mm (l) X 235 mm (H) de la carte x1 x1 x1 x1 x1 x1 x4 x3

Support SE Windows XP / Vista / 7 / 8

Biostar se réserve le droit d'ajouter ou de supprimer le support de SE avec ou sans préavis

31

Motherboard Manual

I

TALIAN

CPU

Socket 1155

Processore Intel Core i7 / i5 / i3 /

Pentium / Celeron

SPECIFICA

Supporto di Execute Disable Bit / Enhanced

Intel SpeedStep® / Architettura Intel 64 /

Tecnologia Extended Memory 64 / Tecnologia

Virtualization / Hyper Threading

Chipset

Intel H61

IT8772E-EX

Super I/O

Fornisce le funzionalità legacy Super I/O Monitoraggio hardware usate più comunemente. Controller / Monitoraggio velocità ventolina

Interfaccia LPC (Low Pin Count)

Funzioni di controllo dell’ambiente:

Funzione "Smart Guardian" di ITE

Alloggi DIMM DDR3 x 2

Memoria principale

Capacità massima della memoria 16GB

Ciascun DIMM supporta DDR3

512MB/1GB/2GB/4GB/8GB

SATA 2

LAN

Controller Serial ATA integrato



Supporto audio HD

ALC662

Alloggio PCI-E Gen3 x16 x1

Alloggi

Alloggio PCI Express Gen2 x1 x2

Connettori

Connettore SATA2 su scheda x4

Connettore pannello frontale x1

Connettore audio frontale x1

Collettore ventolina CPU

Collettore ventolina sistema x1 x1

Modulo di memoria DDR3 a canale doppio

Supporto di DDR3 1066 / 1333 / 1600

DIMM registrati e DIMM ECC non sono supportati

Velocità di trasferimento dei dati fino a

3.0Gb/s.

Compatibile specifiche SATA Versione 2.0

Negoziazione automatica 10 / 100 / 1000 Mb/s

Negoziazione automatica 10 / 100 Mb/s

Supporto audio High-Definition (HD)

Uscita audio 5.1 canali, Biostar Hi-Fi

(a seconda del CPU)

Ciascun connettore supporta 1 unità SATA2

Supporta i servizi del pannello frontale

Supporta la funzione audio pannello frontale

Alimentazione ventolina CPU (con funzione

Smart Fan)

Alimentazione ventolina di sistema

32


SPECIFICA

Collettore cancellazione CMOS x1

Connettore USB2.0 x2 x1 x1

Ciascun connettore supporta 2 porte USB2.0 pannello frontale

Porta seriale

Connettore alimentazione

(24 pin)

Connettore alimentazione

(4 pin)

Tastiera PS/2 x1

Mouse PS/2 x1

Porta HDMI (Hi-Fi H61S3)

I/O

Porta DVI (Hi-Fi H61S3D) pannello posteriore

Porta VGA

Porta LAN x1 x1 x1 x1

Porta USB2.0 x4

Connettore audio x3

Dimension i scheda

170 mm (larghezza) x 235 mm (altezza)

Biostar si riserva il diritto di aggiungere o

Sistemi operativi supportati

Windows XP / Vista / 7 / 8 x1 rimuovere il supporto di qualsiasi sistema operativo senza preavviso.

33

Motherboard Manual

S

PANISH

Especificación

CPU

Socket 1155

Procesador Intel Core i7 / i5 / i3 / Pentium /

SpeedStep® Mejorado / Intel Architecture-64 /

Tecnología Extended Memory 64 / Tecnología de

Celeron

Admite Bit de deshabilitación de ejecución / Intel virtualización / Hyper Threading

Conjunto de

Intel H61 chips

IT8772E-EX

Súper E/S

Le ofrece las funcionalidades heredadas de uso más común Súper E/S.

Monitor hardware

Controlador/monitor de velocidad de ventilador

Interfaz de cuenta Low Pin

Iniciativas de control de entorno,

Función "Guardia inteligente" de ITE

Memoria principal

Ranuras DIMM DDR3 x 2

Capacidad máxima de memoria de 16GB

Cada DIMM admite DDR de

512MB/1GB/2GB/4GB/8GB

SATA 2 Controlador ATA Serie Integrado

Red Local



Soporte de

ALC662 sonido HD

Ranuras

Ranura PCI-E Gen3 x16

Ranura PCI-E Gen2 x 1

Conectores Conector SATA2 en placa

Conector de panel frontal

Conector de sonido frontal

Cabecera de ventilador de CPU

X1

X1

X1

X1

X2

X4

Cabecera de ventilador de sistema X1

Módulo de memoria DDR3 de canal Doble

Admite DDR3 de 1066 / 1333 / 1600

No admite DIMM registrados o DIMM compatibles con ECC

Tasas de transferencia de hasta 3.0 Gb/s.

Compatible con la versión SATA 2.0

Negociación de 10 / 100 / 1000 Mb/s

Negociación de 10 / 100 Mb/s

Soporte de sonido de Alta Definición

Salida de sonido de 5.1 canales, Biostar Hi-Fi

(dependiendo de la CPU)

Cada conector soporta 1 dispositivos SATA2

Soporta instalaciones en el panel frontal

Soporta funciones de sonido en el panel frontal

Fuente de alimentación de ventilador de CPU (con función Smart Fan)

Fuente de alimentación de ventilador de sistema

34


Especificación

Cabecera de borrado de CMOS X1

Conector USB2.0

Puerto serie

Conector de alimentación

(24 patillas)

Conector de alimentación

(4 patillas)

Teclado PS/2

Ratón PS/2

Ratón HDMI (Hi-Fi H61S3)

Panel trasero de

Ratón DVI (Hi-Fi H61S3D)

Puerto VGA

E/S

Puerto de red local

Puerto USB2.0

Conector de sonido

Tamaño de

170 mm. (A) X 235 Mm. (H) la placa

Soporte de sistema Windows XP / Vista / 7 / 8 operativo

X1

X1

X1

X1

X1

X1

X4

X3

X2

X1

X1

X1

Cada conector soporta 2 puertos USB2.0 frontales

Biostar se reserva el derecho de añadir o retirar el soporte de cualquier SO con o sin aviso previo.

35

Motherboard Manual

P

ORTUGUESE

ESPECIFICAÇÕES

CPU

Socket 1155

Processador Intel Core i7 / i5 / i3 / Pentium /

Enhanced Intel SpeedStep® / Intel Arquitecture -64

/ Extended Memory 64 / Virtualization / Hyper

Celeron

Suporta as tecnologias Execute Disable Bit /

Threading

Intel H61 Chipset

IT8772E-EX

Proporciona as funcionalidades mais

Especificaçã o Super I/O utilizadas em termos da especificação Super

I/O.

Iniciativas para controlo do ambiente

Monitorização do hardware

Controlador/Monitor da velocidade da ventoinha

Função "Smart Guardian" da ITE

Interface LPC (Low Pin Count).

Memória principal

SATA 2

Ranhuras DIMM DDR3 x 2

Capacidade máxima de memória: 16 GB

Módulo de memória DDR3 de canal duplo

Suporta módulos DDR3 1066 / 1333 / 1600

Cada módulo DIMM suporta uma memória Os módulos DIMM registados e os DIMM ECC não

DDR3 de 512MB/ 1GB/2GB/4GB/8GB são suportados

Controlador Serial ATA integrado

Velocidades de transmissão de dados até 3.0 Gb/s.

Compatibilidade com a especificação SATA versão

2.0

Auto negociação de 10 / 100 / 1000 Mb/s

Auto negociação de 10 / 100 Mb/s

LAN



Suporte para áudio

ALC662 de alta definição

Suporta a especificação High-Definition Audio

Saída de áudio de 5.1 canais, Biostar Hi-Fi

Ranhuras

Ranhura PCI-E Gen3 x16

Ranhura PCI-E Gen2 x 1 na placa

Conector SATA2

Conectores Conector do painel frontal

Conector de áudio frontal

Conector da ventoinha da CPU x1 x2 x4 x1 x1 x1

(dependendo da CPU)

Cada conector suporta 1 dispositivo SATA2

Para suporte de várias funções no painel frontal

Suporta a função de áudio no painel frontal

Alimentação da ventoinha da CPU (com a função

Smart Fan)

36


ESPECIFICAÇÕES

Conector da ventoinha do sistema x1 Alimentação da ventoinha do sistema

Conector para limpeza do CMOS x1

Conector USB2.0 x2

Cada conector suporta 2 portas USB2.0 no painel frontal

Porta série x1

Conector de alimentação

(24 pinos)

Conector de alimentação

(4 pinos)

Teclado PS/2

Rato PS/2

Entradas/S Porta HDMI (Hi-Fi H61S3) aídas no painel traseiro

Porta DVI (Hi-Fi H61S3D)

Porta VGA

Porta LAN

Porta USB2.0

Tomada de áudio

Tamanho da placa

170 mm (L) X 235 mm (A)

Sistemas operativos Windows XP / Vista / 7 / 8 suportados x1 x1 x1 x1 x1 x4 x3 x1 x1 x1

A Biostar reserva-se o direito de adicionar ou remover suporte para qualquer sistema operativo com ou sem aviso prévio.

37

Motherboard Manual

P

OLISH

Procesor

Socket 1155

Procesor Intel Core i7 / i5 / i3 / Pentium /

Celeron

SPEC

Obsługa Execute Disable Bit / Enhanced Intel



Hyper Threading

Chipset

Pamięć główna

Intel H61

Gniazda DDR3 DIMM x 2

Maks. wielkość pamięci 16GB

Każde gniazdo DIMM obsługuje moduły

512MB/1GB/2GB/4GB/8GB DDR3

Moduł pamięci DDR3 z trybem podwójnego kanału

Obsługa DDR3 1066 / 1333 / 1600

Brak obsługi Registered DIMM oraz ECC DIMM

IT8772E-EX

Super I/O

Zapewnia najbardziej powszechne funkcje

Super I/O.

Interfejs Low Pin Count

SATA 2 Zintegrowany kontroler Serial ATA

Funkcje kontroli warunków pracy,

Monitor H/W

Kontroler/Monitor prędkości wentylatora

Funkcja ITE "Smart Guardian"

Transfer danych do 3.0 Gb/s.

Zgodność ze specyfikacją SATA w wersji 2.0

LAN

Obsługa audio HD

Gniazda



ALC662

Gniazdo PCI-E Gen3 x16

Gniazdo PCI-E Gen2 x 1

Złącza Złącze SATA2 wbudowane

Złącze panela przedniego

Przednie złącze audio x1 x2 x4 x1 x1

10 /100 /1000Mb/s z automatyczną negocjacją szybkości

10 /100 Mb/s z automatyczną negocjacją szybkości

Obsługa High-Definition Audio

5.1 kanałowe wyjście audio, Biostar Hi-Fi

(w zależności od procesora)

Każde złącze obsługuje 1 urządzenie SATA2

Obsługa elementów panela przedniego

Obsługa funkcji audio na panelu przednim

Złącze główkowe wentylatora Zasilanie wentylatora procesora (z funkcją Smart

38


SPEC

Złącze główkowe wentylatora

Zasilanie wentylatora systemowego systemowego x1

Złącze główkowe kasowania CMOS x1

Złącze USB2.0

Port szeregowy x2 x1

Każde złącze obsługuje 2 porty USB2.0 na panelu przednim

Złącze zasilania (24 pinowe)

Złącze zasilania (4 pinowe)

Klawiatura PS/2

Mysz PS/2

Port HDMI (Hi-Fi H61S3)

Back Panel Port DVI (Hi-Fi H61S3D)

I/O Port VGA

Port LAN

Port USB2.0

Gniazdo audio

Wymiary płyty

Obsluga

170 mm (S) X 235 mm (W) systemu operacyjne

Windows XP / Vista / 7 / 8 go x1 x1 x1 x1 x1 x1 x1 x1 x4 x3

Biostar zastrzega sobie prawo dodawania lub odwoływania obsługi dowolnego systemu operacyjnego bez powiadomienia.

39

Motherboard Manual

R

USSIAN

СПЕЦ

CPU

Socket 1155

(центральн

Процессор Intel Core i7 / i5 / i3 / Pentium / ый процессор)

Celeron

Поддержка технологий Execute Disable Bit /

Enhanced Intel SpeedStep® / Intel Architecture-64

/ Extended Memory 64 Technology / технологии виртуализация / Hyper Threading

Набор микросхем

Intel H61

Слоты DDR3 DIMM x 2

Основная память

Super I/O

SATA 2

Максимальная ёмкость памяти 16 ГБ

Каждый модуль DIMM поддерживает

512МБ/1ГБ/2ГБ/4ГБ/8ГБ DDR3

IT8772E-EX

Модуль памяти с двухканальным режимом DDR3

Поддержка DDR3 1066 / 1333 / 1600

Не поддерживает зарегистрированные модули

DIMM and ECC DIMM

Инициативы по охране окружающей среды,

Обеспечивает наиболее используемые действующие функциональные

Аппаратный монитор

Регулятор скорости вентилятора/ монитор возможности Super I/O. Функция ITE "Smart Guardian"

Интерфейс с низким количеством выводов (Интеллектуальная защита)

Встроенное последовательное устройство скорость передачи данных до 3.0 гигабит/с. управления ATA Соответствие спецификации SATA версия 2.0

Локальная RTL8111F (Hi-Fi H61S3, Hi-Fi H61S3D) сеть RTL8105E (Hi-Fi H61S3L)

Автоматическое согласование 10/ 100 /1000 Мб/с

Автоматическое согласование 10/ 100 Мб/с

Звуковая поддержка

ALC662 жесткого диска

Слоты

Слот PCI-E Gen3 x16 @ x16

Слот PCI-E Gen2 x 1

Звуковая поддержка High-Definition

5.1канальный звуковой выход, Biostar Hi-Fi x1 x2

(в зависимости от процессора)

Встроенны Разъём SATA2 й разъём x4 Каждый разъём поддерживает 1 устройство SATA2

Поддержка звуковых функций на лицевой

Входной звуковой разъём x1 панели

Источник питания для вентилятора центрального

Контактирующее приспособление вентилятора центрального процессора x1 процессора (с функцией интеллектуального вентилятора)

40


СПЕЦ

Контактирующее приспособление

Источник питания для вентилятора системы вентилятора системы x1

Открытое контактирующее приспособление CMOS x1

Каждый разъём поддерживает 2 USB2.0-порта на

USB2.0-разъём x2 лицевой панели

Последовательный порт x1

Разъем питания (24 вывод) x1

Разъем питания (4 вывод) x1

Клавиатура PS/2

Мышь PS/2 x1 x1

Задняя Порт HDMI (Hi-Fi H61S3) x1 панель Порт DVI (Hi-Fi H61S3D) x1 средств

Порт VGA x1 ввода-выв

Порт LAN ода x1

USB2.0-порт x4

Гнездо для подключения наушников x3

Размер панели

170 мм (Ш) X 235 мм (В)

Поддержка

OS


Biostar сохраняет за собой право добавлять или удалять средства обеспечения для OS с или без предварительного уведомления.

41

Motherboard Manual

A

RABIC

تﺎﻔﺻاﻮﻤﻟا

تﺎﻴﻨﻘﺗ ﻢﻋﺪﺗExecute Disable Bit / Enhanced Intel



Hyper Threading

Socket 1155

ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو

تﺎﺠﻟﺎﻌﻣIntel Core i7 / i5 / i3 / Pentium /

ﺔﻳﺰآﺮﻤﻟا

Celeron ﻰﻟإ ﻞﺼ ﻳ ددﺮﺘ ﺑ

2 دﺪﻋ DDR3 DIMM ﺔﺤﺘﻓ

Intel H61 ﺢﺋاﺮﺸﻟا ﺔﻋﻮﻤﺠﻣ

ةﺮآاذ ةﺪﺣوDDR3 ةﺎﻨ ﻘﻟا ﺔﺟودﺰﻣ

ﺖﻳﺎﺑ ﺎﺠﻴﺟ 16 ىﻮﺼﻗ ةﺮآاذ ﺔﻌﺳ

ﺔﺤﺘﻓ ﻞآ ﻢﻋﺪﺗDIMM عﻮﻧ ﻦﻣ ةﺮآاذ ﻢﻋﺪﺗ DDR3 ﺔﻌﺳ /512 / 1 و ﺖﻳﺎﺑ ﺎﺠﻴﻣ

عﻮﻧ ﻦﻣ ةﺮآاﺬﻟا ﻢﻋﺪﺗ DDR3 تﺎﻌﺳ 1066 / 1366 / 1600

ﺔﻴﺴﻴﺋﺮﻟا ةﺮآاﺬﻟا

ﺎﺠﻴﻣ ﺖﻳﺎﺑ

ﺖﻳﺎﺑ ﺎﺠﻴﺟ 8 و / 4 و / 2 و

: ﺔﺌﻴﺒﻟا ﻲﻓ ﻢﻜﺤﺘﻟا ﻞﺋﺎﺳو

ةﺮآاﺬﻟا ﻖﺋﺎﻗر ﻢﻋﺪﺗ ﻻDIMM ﻊﻣ ﻖﻓاﻮﺘﺗ ﻻ ﻲﺘﻟا ﻚﻠﺗو ECC

ةﺰﻬﺟﻷا ﺔﻟﺎﺣ ﺔﻓﺮﻌﻤﻟ ﺐﻗاﺮﻣ

ﺔﺣوﺮﻤﻟا ﺔﻋﺮﺳ ﻲﻓ ﺐﻗاﺮﻣ

IT8772E-EX

ﺔﻔﻴﻇو ﺮﻓﻮﺗSuper I/O .

ًﺎﻣاﺪ ﺨﺘﺳا ﺮﺜآﻷا

Super I/O

ﺔﻴﻨﻘﺗ ﻢﻋﺪ ﺗ Low Pin Count Interface

Smart Fan

ﺔﻔﻴﻇو"Smart Guardian" ﻦﻣ ITE

ﻰﻟإ ﻞﺼﺗ تﺎﻋﺮﺴﺑ تﺎﻧﺎﻴﺒﻟا ﻞﻘﻧ3.0

.

ﺔﻴﻧﺎﺛ / ﺖﺑﺎﺠﻴﺟ

تﺎﻔﺻاﻮﻤﻟ ﺔﻘﺑﺎﻄﻣSATAراﺪﺻﻹا 2.0

ﺔﻴﻧﺎﺛ / ﺖﻳﺎﺑ ﺎﺠﻴﻣ 1000 / 100 / 10 ﻲﺋﺎﻘﻠﺗ ضوﺎﻔﺗ

ﺔﻴﻧﺎﺛ / ﺖﻳﺎﺑ ﺎﺠﻴﻣ 100 / 10 ﻲﺋﺎﻘﻠﺗ ضوﺎﻔﺗ

ﻦﻣ ﻒﻳﺮﻌﺘﻟا ﻲﻟﺎﻋ تﻮﺼﻟا ﺔﻴﻨﻘﺗ ﻢﻋﺪﺗ

تﻮﺼﻟا جﺮﺨﻟ تاﻮﻨﻗ 5.1

, Biostar Hi-Fi

SATA2 ةﺰﻬﺟأ ﻦﻣ ﺪﺣاو ﺬﻔﻨﻣ ﻞآ ﻢﻋﺪﻳ

ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟا تاﺰﻴﻬﺠﺗ ﻢﻋﺪﻳ

ﺔﻔﻴﻇو ﻊﻣ ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻤﻟ ﺔﻗﺎﻄﻟا ﻞﻴﺻﻮﺘﻟ

4

1

1 دﺪﻋ

ﻢﻜﺤﺘﻣSerial ATAﻞﻣﺎﻜﺘﻣ SATA 2


ﺔﻴﻠﺧاد ﺔﻜﺒﺷ


) ﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﻰﻠﻋ ادﺎﻤﺘﻋا ( 1 دﺪﻋ

2 دﺪﻋ

دﺪﻋ

دﺪﻋ

ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟﺎﺑ تﻮﺼﻟا ﺔﻔﻴﻇو ﻢﻋﺪﻳ 1 دﺪﻋ

ALC662

ﻲﻟﺎﻋ تﻮﺼﻟا ﻢﻋد

ﻒﻳﺮﻌﺘﻟا

PCI-E Gen3 x16 ﺔﺤﺘﻓ

PCI-E Gen2 x 1 ﺔﺤﺘﻓ

ﻲﻣﺎﻣﻷا تﻮﺼﻟا ﺬﻔﻨﻣ

ﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻣ ﺔﻠﺻو

تﺎﺤﺘﻔﻟا

SATA2 ﺬﻔﻨﻣ

ﺢﻄﺳ ﻰﻠﻋ ﺬﻓﺎﻨﻤﻟا

ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻣ

ﺔﺣﻮﻠﻟا

42


تﺎﻔﺻاﻮﻤﻟا

مﺎﻈﻨﻟا ﺔﺣوﺮﻤﻟ ﺔﻗﺎﻄﻟا ﻞﻴﺻﻮﺘﻟ 1 دﺪﻋ مﺎﻈﻨﻟا ﺔﺣوﺮﻣ ﺔﻠﺻو

1 دﺪﻋ

ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟﺎﺑ USB2.0

ﻲﺘﺤﺘﻓ ﺬﻔﻨﻣ ﻞآ ﻢﻋﺪﻳ 2 دﺪﻋ

1 دﺪﻋ

CMOS ﺢﺴﻣ ﺔﻠﺻو

USB2.0

ﺬﻔﻨﻣ

ﻲﻠﺴﻠﺴﺗ ﺬﻔﻨﻣ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

4 دﺪﻋ

3 دﺪﻋ

( سﻮﺑد 24 ) ﺔﻗﺎﻄﻟا ﻞﻴﺻﻮﺗ ﺬﻔﻨﻣ

( ﺲﻴﺑﺎﺑد 4 ) ﺔﻗ ﺎﻄﻟا ﻞﻴﺻﻮﺗ ﺬﻔﻨﻣ

PS/2 ﺢﻴﺗﺎﻔﻣ ﺔﺣﻮﻟ

PS/2 سوﺎﻣ

HDMI (Hi-Fi H61S3) ﺬﻓﺎﻨﻣ

DVI (Hi-Fi H61S3D) ﺬﻓﺎﻨﻣ جﺮﺧ / ﻞﺧد ﺬﻓﺎﻨﻣ

VGA ﺬﻓﺎﻨﻣ

ﺔﻴﻔﻠﺨﻟا ﺔﺣﻮﻠﻟا

ﺔﻴﻠﺤﻣ لﺎﺼﺗا ﺔﻜﺒﺷ ﺬﻔﻨﻣ

USB 2.0

ﺬﻓﺎﻨﻣ

تﻮﺻ ﺲﺒﻘﻣ

ﺔﺣﻮﻠﻟا ﻢﺠﺣ

ﻆﻔﺘﺤﺗBiostar نوﺪﺑ وأ رﺎﻄﺧﺈﺑ ﻞﻴﻐﺸﺗ مﺎﻈﻧ يﻷ ﻢﻋﺪﻟا ﺔﻟازإ وأ ﺔﻓﺎﺿإ ﻲﻓ ﺎﻬﻘﺤﺑ


.

رﺎﻄﺧإ

ﻞﻴﻐﺸﺘﻟا ﺔﻤﻈﻧأ ﻢﻋد

43

Motherboard Manual

J

APANESE

仕様

CPU

Socket 1155

Intel Core i7 / i5 / i3 / Pentium / Celeron プロ

Intel Architecture-64 / Extended Memory 64

Technology / Virtualization Technology / Hyper

セッサ

Execute Disable Bit / Enhanced Intel SpeedStep® /

Threadingをサポートします

チップセット Intel H61

DDR3 DIMMスロット x 2

最大メモリ容量

16GB

メインメモリ

各 DIMMは 512MB/1GB/2GB/4GB/8GB DDR3

デュアルチャンネルモードDDR3メモリモジュール

DDR3 1066 / 1333 / 1600をサポート

登録済み DIMMとECC DIMMはサポートされません

をサポート

IT8772E-EX

Super I/O

もっとも一般に使用されるレガシー Super I/O機 H/Wモニター

能を採用しています。ファン速度コントローラ / モニター

低ピンカウントインターフェイス

環境コントロールイニシアチブ、

ITEの「スマートガーディアン」機能

SATA 2

統合シリアル ATAコントローラ

最高

3.0 Gb/秒のデータ転送速度

SATAバージョン2.0仕様に準拠

LAN



HDオーディ

オのサポート

ALC662

10 / 100 / 1000 Mb/秒のオートネゴシエーション

10 / 100 Mb/秒のオートネゴシエーション

ハイデフィニションオーディオのサポート

5.1 チャンネルオーディオアウト, Biostar Hi-Fi

スロット

PCI Express Gen2 x 1スロット x2

オンボードコ

ネクタ

フロントパネルコネクタ

x1

フロントオーディオコネクタ x1

システムファンヘッダ x1

CMOSクリアヘッダ x1

44


仕様

各コネクタは 2つのフロントパネルUSB2.0ポートをサポ

USB2.0コネクタ x2

ートします

シリアルポート

x1

電源コネクタ (24ピン)

電源コネクタ

(4ピン) x1 x1

背面パネル

I/O

PS/2キーボード x1

PS/2マウス x1

HDMIポート(Hi-Fi H61S3) x1

DVIIポート(Hi-Fi H61S3D) x1

VGAポート x1

LANポート x1

USB2.0ポート x4

オーディオジャック x3

ボードサイズ 170 mm (幅) X 235 mm (高さ)

OSサポート Windows XP / Vista / 7 / 8

Biostarは事前のサポートなしにOSサポートを追加または

削除する権利を留保します。

2013/07/30

45

Biostar Hi-Fi H61S3L Owner's Manual

FCC Information and Copyright

EFORE

OU

TART

ACKAGE

HECKLIST

OTHERBOARD

EATURES

EAR

ANEL

ONNECTORS

OTHERBOARD

AYOUT

NSTALLING

ENTRAL

ROCESSING

NIT

NSTALL A

EATSINK

EADERS

CPU_FAN1: CPU Fan Header

SYS_FAN1: System Fan Header

NSTALLING

YSTEM

EMORY

A. Memory Modules

B. Memory Capacity

C. Dual Channel Memory Installation

ONNECTORS AND

LOTS

SATA1~SATA4: Serial ATA Connectors

ATXPWR2: ATX Power Source Connector

ATXPWR1: ATX Power Source Connector

PEX16_1: PCI-Express Gen3 x16 Slot

PEX1_1/PEX1_2: PCI-Express Gen2 x1 Slots

Install an Expansion Card

OW TO

ETUP

UMPERS

ETAIL

ETTINGS

PANEL1: Front Panel Header

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel

F_AUDIO1: Front Panel Audio Header

J_COM1: Serial Port Connector

JCMOS1: Clear CMOS Header

Clear CMOS Procedures:

RIVER

NSTALLATION

OTE

A. Driver Installation

B. Software Installation

C. Manual

OFTWARE

Installing Software

Launching Software

eHot-Line (Optional)

Smart EAR

PDATE

1. BIOS Update Utility

2. Online Update Utility

3. BIOSTAR BIOS Flasher

EEP

ODE

Boot Block Beep Codes

POST BIOS Beep Codes

ROUBLESHOOTING

CPU Overheated

ERMAN

RENCH

TALIAN

PANISH

ORTUGUESE

OLISH

USSIAN

RABIC

APANESE

Related manuals

Biostar