PENTAX PHOTO Browser, PHOTO Laboratory software Operating Manual
โฆษณา
โฆษณา
Operating Manual
Thank you for purchasing the PENTAX Digital Camera.
This is the manual for “PENTAX PHOTO Browser 3” and “PENTAX PHOTO
Laboratory 3” software for your Windows PC or Macintosh for enjoying images created with your camera. Please read the separate camera operating manual and this manual before using your camera, “PENTAX PHOTO Browser 3”, or
“PENTAX PHOTO Laboratory 3”, in order to get the most out of all the features and functions.
Keep the camera operating manual and this manual safe, as they can be valuable tools in clarifying and helping you to understand all the camera’s capabilities.
Regarding copyrights
Images taken using this camera that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright
Act. Please take care, as there are even cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display. Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also.
Regarding trademarks
• PENTAX and smc PENTAX are trademarks of PENTAX Corporation.
• PENTAX PHOTO Browser, PENTAX PHOTO Laboratory, PENTAX REMOTE
Assistant are trademarks of PENTAX Corporation.
• The SD logo is a trademark.
• All other brands or product names are trademarks or registered trademarks of their respective owners.
Regarding PictBridge
PictBridge allows the user to connect the printer and digital camera directly, using the unified standard for the direct printout of images. You can print images directly from the camera through a few simple operations.
Disclaimer
• PENTAX is not responsible for any damages resulting from the direct or indirect use of this software or repercussive damages, damage to data, programs or other intangible property, loss of profit or anticipated profit, or dispute with a third party resulting from the use of this software.
• The specifications of this software are subject to change without notice.
Symbols used in this manual have the following meanings:
Gives information that is useful to know.
Gives cautions and notes about the operation.
The screen pictures shown in this manual may differ depending on the type of computer or camera used.
Contents
Enjoying Your Digital Camera Pictures ............................. 2
Provided Software ............................................................... 4
Software Provided....................................................................................4
System Requirements..............................................................................5
Installing the Software......................................................... 7
When Using Windows ..............................................................................7
When Using Macintosh ............................................................................9
Saving Images on Your Computer ................................... 11
Saving Images by Connecting Your Camera and PC (For Windows)....11
Saving Images by Connecting Your Camera and PC
(For Macintosh) ......................................................................................16
Other Methods for Saving Images .........................................................18
PENTAX PHOTO Browser 3 .............................................. 19
Opening PENTAX PHOTO Browser 3 ...................................................19
About the PENTAX PHOTO Browser 3 Window....................................20
Viewing Images......................................................................................31
Main Image View Window......................................................................35
Managing Image Files and Folders........................................................46
Saving a List of Image Data ...................................................................53
Continuous Image Playback in a Slideshow ..........................................55
Printing an Image ...................................................................................58
Changing the PENTAX PHOTO Browser 3 Settings .............................65
PENTAX PHOTO Laboratory 3.......................................... 71
Opening PENTAX PHOTO Laboratory 3 ...............................................71
About the PENTAX PHOTO Laboratory 3 Window................................73
Selecting a RAW File to Process ...........................................................80
Easily Modifying RAW Files ...................................................................83
Setting RAW File Processing Conditions ...............................................84
Saving Image Files.................................................................................89
Saving Image File Adjustment ...............................................................90
Recalling Image File Adjustment............................................................91
Printing ...................................................................................................92
Changing the PENTAX PHOTO Laboratory 3 Settings .........................98
Glossary............................................................................ 102
1
2
Enjoying Your Digital Camera Pictures
You can use a computer to organize and edit the pictures captured with your digital camera.
Direct Print
Connect your camera directly to a
PictBridge-compatible printer using the
USB cable. (Not available on w.)
View and record images on
AV equipment
Connect your camera to a TV,
DVD recorder or other audiovisual equipment using an AV cable to view and/or record images.
Your computer is...
• equipped with a standard USB interface.
• using Windows 2000/XP or Mac
OS X Ver. 10.2 or later.
Connect your camera to a computer using the USB cable to copy the camera images to a computer.
Use your photo shop
You can have prints made from images recorded on your card at a photo shop.
• Set DPOF settings on your camera, and get prints from your photo shop.
• Select the images for prints.
You can transfer your images using a built-in card slot + PC card adapter or a card reader.
• Remove the card from the camera. When transferring images on the card to a computer with another device, make sure to review the user manual accompanying that device.
Use your image data
You can use your e-mail software to attach and send images by e-mail, or post the images on your website.
• See the operating manual of your e-mail software for details on how to make attachments to e-mails.
• See the operating manual of the software you are using for details on how to use images on your website.
Use your printer
PENTAX PHOTO Browser 3 (p.19 - p.70)
PENTAX PHOTO Laboratory 3 (p.71 - p.101)
• View images • Organize and save images
• Print images • Rename all
• Save all image data
• PENTAX-specification RAW file processing
Use a commercially-available image editing software to perform image editing operations.
You can use your printer to print images transferred to your computer.
Some printers can print directly from SD Memory
Cards.
• For details, see the operating manual of the printer you are using.
Save your image data
Images transferred to the computer can be saved onto a CD-R or other media.
3
4
Provided Software
The provided CD-ROM (S-SW53) contains the following software:
• PENTAX PHOTO Browser 3
• PENTAX PHOTO Laboratory 3
This manual describes PENTAX PHOTO Browser 3 and PENTAX PHOTO
Laboratory 3 with screen images from Windows XP.
The operation of these software applications is nearly the same on Macintosh with the exception of some keys. For information on Macintosh-specific instructions, see the sections labeled “For Macintosh” or the online help.
Software Provided
PENTAX PHOTO Browser 3
PENTAX PHOTO Browser 3 is software for viewing, printing and managing images taken on your digital camera and saved on your computer.
Files with extensions .bmp (BMP), .jpg (JPEG), .pef (PENTAX RAW), .pct
(PICT), .png (PNG) and .tif (TIFF) are supported.
PENTAX PHOTO Browser 3 can perform the following tasks:
• Save image files under the same or a new name, change file names and file types, copy, cut, paste, rotate and delete.
• Create new folders, change folder names, copy, cut, delete and paste.
• Save image data list.
• Check image data.
• View RAW files easily.
• Print images.
You can also start PENTAX PHOTO Laboratory 3 and PENTAX REMOTE
Assistant *1 from within PENTAX PHOTO Browser 3.
*1: PENTAX REMOTE Assistant can only be used together with w.
PENTAX PHOTO Laboratory 3
This application supports a number of image processing functions for use with image files recorded in PENTAX’s exclusive digital-camera CCD
RAW (“RAW”) format, including data conversion, color adjustment, and image compensation, and further allows you to save these images in formats compatible with other commercial image browsing and editing software. You can also print RAW files.
PENTAX PHOTO Laboratory 3 can also be run as a standalone application.
5
System Requirements
We recommend the following system requirements to transfer images from your camera to a computer and to install and use PENTAX PHOTO
Browser 3 and PENTAX PHOTO Laboratory 3.
Windows System Requirements
USB Connection
• Computer with Windows 2000/XP (Home Edition/Professional) preinstalled.
• USB port must be standard equipment.
Application Software
< PENTAX PHOTO Browser 3 and PENTAX PHOTO Laboratory 3 >
(9 languages: English, French, German, Spanish, Italian, Russian,
Chinese [traditional and simplified], Korean, Japanese)
• Operating System: Windows 2000/XP (Home Edition/Professional)
• CPU : Pentium 4 or higher
(Pentium 4 2.0 GHz or higher recommended)
• RAM
• Monitor
: 512 MB or more (1.0 GB or more recommended)
: 1024×768 pixels or more (1280×1024 pixels or more recommended) with 24-bit full color (approximately
16.77 million colors)
• Free Disk Space : 250 MB or more (500 MB or more recommended)
We recommend using AC adapter when the camera is connected to the computer. If the batteries become depleted during image transfer, the image data or SD Memory Card may be damaged.
6
Macintosh System Requirements
USB Connection
• Macintosh with Mac OS X 10.2 or later preinstalled.
• USB port must be standard equipment.
* Installation of the USB driver is not necessary.
Application Software
PENTAX PHOTO Browser 3 and PENTAX PHOTO Laboratory 3
(9 languages: English, French, German, Spanish, Italian, Russian,
Chinese [traditional and simplified], Korean, Japanese)
• Operating System: Mac OS X 10.2 or later
• CPU : PowerPC G4 or higher
(PowerPC G5 recommended; can be used on Intel
Core processor-based Macintosh computers with
Rosetta architecture)
: 512 MB or more (1.0 GB or more recommended) • RAM
• Monitor : 1024×768 pixels or more (1280×1024 pixels or more recommended) with 24-bit full color (approximately
16.77 million colors)
• Free Disk Space : 250 MB or more (500 MB or more recommended)
We recommend using AC adapter (sold separately) when the camera is connected to the computer. If the batteries become depleted during image transfer, the image data or SD Memory Card may be damaged.
Installing the Software
Here is the procedure for installing PENTAX PHOTO Browser 3 and
PENTAX PHOTO Laboratory 3.
PENTAX PHOTO Browser and PENTAX PHOTO Laboratory can overwrite earlier versions of this software supplied with w, J,
L , U and F.
Make sure to install PENTAX PHOTO Browser 3 and PENTAX PHOTO
Laboratory 3 on the provided CD-ROM (S-SW53) in order to use RAW files shot with the q or r.
When multiple accounts have been setup in Windows 2000/XP or Mac
OS X, log on with an account that has administrative rights before installing the software.
When Using Windows
1
Turn your PC on.
Close any other software that is open.
2
Place the provided CD-ROM (S-SW53) into the CD-ROM drive on your computer.
The PENTAX Software Installer screen appears.
• If the PENTAX Software Installer screen does not appear
Display the PENTAX Software Installer screen following the steps below.
1) Double-click [My Computer] from the start menu.
2) Double-click the [CD-ROM drive (S-SW53)] icon.
3) Double-click [Setup.exe].
3
You can choose the languages from the displayed screen.
The software selection screen appears.
7
8
4
Click [PENTAX Digital Camera
Utility].
5
Select the desired language in the Select Language screen and click [OK].
Some operating environments select the language automatically. Continue with the installation in step 6. The installer starts.
6
The installer starts. Click
[Next].
Follow the instructions on the screen and continue with the installation.
Product Registration on the Internet
To better serve you, please take a moment to register your software.
Please click [Product Registration] on the software selection screen in step 4 (p.8).
A world map for Internet Product
Registration is displayed. If your PC is connected to the Internet, click the displayed country or region and then follow the instructions to register your software.
When Using Macintosh
1
Turn on your Macintosh.
Close any other software that is open.
2
Place the provided CD-ROM (S-SW53) into the CD-ROM drive on your Macintosh.
3
Double-click the [CD-ROM drive (S-SW53)] icon.
The contents of the CD-ROM are displayed.
9
10
4
Double-click the [PENTAX
Installer] icon.
The PENTAX Software Installer screen appears.
5
You can choose the languages from the displayed screen.
The software selection screen appears.
6
Click [PENTAX Digital Camera
Utility].
Follow the instructions on the screen and continue with the installation.
Product Registration on the Internet
To better serve you, please take a moment to register your software.
Please click [Product Registration] on the software selection screen in step
6. Next, follow the instructions on the screen to register your software
(p.9).
Saving Images on Your Computer
Here is the procedure for saving images captured with your digital camera onto your computer.
This section describes the method for saving images by connecting your camera and computer with the USB cable, as well as other methods.
Saving Images by Connecting Your Camera and PC (For Windows)
Setting [Transfer Mode] on the Camera to [PC] r is used as an example here. When using w, [Transfer Mode] does not need to be set. Go to “Connecting Your Camera to Your PC” (p.12).
1
Press the 3 button on the camera.
The [A Rec. Mode] menu or the [Q Playback] menu appears.
2
Press the four-way controller ( p) to display the [H Set-up] menu.
3
Use the four-way controller ( mn) to select [Transfer Mode].
4
Press the four-way controller ( p).
A pull-down menu appears.
5
Use the four-way controller
( mn) to select [PC].
[Transfer Mode] settings depend on the connected device.
When connecting to a PC:
[PC] = USB 2.0 (Hi-Speed USB compatible)
[PC-F] = USB 1.1
When printing with a printer:
[PictBridge] (only for compatible printers)
Set-up
Brightness Level
Video Out
Transfer Mode
Auto Power Off
Folder Name
File #
Cancel
0
NTSC
P C
PictBridge
P C - F
OK OK
11
12
6
Press the 4 button on the camera.
• Do not connect the camera to your computer while [PictBridge] is selected for the [Transfer Mode].
• If the USB transmission speed of the computer is slower than that of the camera, an error may occur when transferring data. If this occurs, set the
Transfer Mode to [PC-F]. This sets the transfer speed to the USB 1.1 data transfer rate, thereby reducing the possibility of an error.
Connecting Your Camera to Your PC
1
Turn your PC on.
2
Turn off your camera and use the USB cable to connect your camera and your PC.
Confirm that an SD Memory Card is inserted into your camera.
3
Turn your camera on.
The camera is recognized as a [Removable Disk] in [My Computer].
• If the [Removable Disk Drive] dialog appears in Windows XP, select [Open folder to view files using Windows Explorer] and click [OK]. The window in step 3 on p.13 appears.
• When using Windows XP, if the SD Memory Card has a volume label, the content of the volume label name appears instead of [Removable Disk]. A new unformatted SD Memory Card may show the manufacturer name or model number.
Saving Camera Images on Your PC
Windows XP is used as an example here.
1
Click [My Computer] from the start menu.
2
Double-click the [Removable
Disk] icon.
3
Double-click the [DCIM] icon.
The [xxxPENTX] (xxx is a three-digit number) folder appears.
The camera image files are in this folder.
When the method for assigning folder names is set to [Date], the [xxx_MMDD] folder
(where MMDD is the shooting date) appears. (p.178 of the camera Operating Manual)
4
Drag and drop the [xxxPENTX] or the [xxx_MMDD] folder to the desktop or any desired folder, such as the [My
Documents] folder.
The camera images are saved on your
PC as an entire folder.
Images can also be saved using the [Easy Image Transfer] function in PENTAX
PHOTO Browser 3. (p.47)
13
14
Disconnecting Your Camera from Your PC
Windows XP
1
Double-click the [Safely
Remove Hardware] icon in the task bar.
The [Safely Remove Hardware] screen appears.
2
Confirm that [USB Mass
Storage Device] is selected and then click [Stop].
The [Stop a Hardware device] screen appears.
3
Select [USB Mass Storage
Device] and click [OK].
A message appears indicating that the hardware can be safely removed.
4
Click [Close].
5
Turn off the camera and disconnect the USB cable from your camera and PC.
Windows 2000
1
Double-click the [Unplug or
Eject Hardware] icon in the task bar.
The [Unplug or Eject Hardware] screen appears.
2
Confirm that [USB Mass
Storage Device] is selected and then click [Stop].
The [Stop a Hardware device] screen appears.
3
Select [USB Mass Storage
Device] and click [OK].
A message appears indicating that the hardware can be safely removed.
4
Click [OK].
5
Click [Close] and then, turn off the camera and disconnect the USB cable from your camera and PC.
The USB mass storage device will not stop when the files stored on the removable disk are in use for applications.
15
16
Saving Images by Connecting Your Camera and PC (For Macintosh)
Setting the USB Connection Mode to [PC]
When using r, set the [Transfer Mode] on the camera to [PC]
(p.11).
When using w, [Transfer Mode] does not need to be set. Proceed to the following steps.
Connecting the Camera and Macintosh
1
Turn on your Macintosh.
2
Turn off your camera and use the USB cable to connect your camera and your Macintosh.
Confirm that an SD Memory Card is inserted into your camera.
3
Turn your camera on.
Your camera is recognized on the desktop as [NO_NAME (or the volume label of the SD Memory Card if one is registered)].
You can change the folder name.
When the iPhoto screen appears, close it.
Saving Camera Images on Your Macintosh
Mac OS X (ver. 10.3) is used as an example here.
1
Double-click the [NO NAME] icon on the desktop.
2
Double-click the [DCIM] icon.
The [xxxPENTX] (xxx is a three-digit number) folder appears.
The camera image files are in this folder.
When the method for assigning folder names is set to [Date], the [xxx_MMDD] folder (where MMDD is the shooting date) appears. (p.176 of the camera
Operating Manual)
3
Double-click the [Macintosh
HD] icon on the desktop.
This opens the [Macintosh HD] volume.
17
18
4
Drag the [xxxPENTX] or
[xxx_MMD] folder to
[Macintosh HD] volume or any other volume or folder.
The complete folder, containing all images, is saved to the destination volume or folder.
Disconnecting Your Camera from Your Macintosh
1
Drag [NO NAME (or the volume label name on the SD Memory
Card)] on the desktop to the trash can.
2
Turn off the camera and disconnect the USB cable from your camera and Macintosh.
Other Methods for Saving Images
Use a card reader or card adapter to send image files directly to your computer from an SD Memory Card with saved images without connecting your camera and your computer with a USB cable. (p.47)
For details, please refer to the user’s manual for your computer or card reader.
PENTAX PHOTO Browser 3
This section describes opening and closing PENTAX PHOTO Browser 3 and viewing the PENTAX PHOTO Browser 3 window, and explains its functions.
Opening PENTAX PHOTO Browser 3
For Windows
1
Select the start menu on the desktop.
2
Select [All Programs] - [PENTAX
Digital Camera Utility] - [PENTAX
PHOTO Browser].
PENTAX PHOTO Browser 3 is opened and the PENTAX PHOTO Browser 3 window appears.
Closing PENTAX PHOTO Browser 3
Select [Exit] from the [File] menu.
For Macintosh
1
Double-click the [PENTAX Digital Camera Utility] folder in
[Applications] on the hard disk.
2
Double-click the [PENTAX
PHOTO Browser] program icon.
PENTAX PHOTO Browser 3 is opened and the PENTAX PHOTO Browser 3 window appears.
Closing PENTAX PHOTO Browser 3
Select [Quit PENTAX PHOTO Browser] in [PENTAX PHOTO Browser] on the desktop menu bar.
19
20
About the PENTAX PHOTO Browser 3 Window
This section explains the PENTAX PHOTO Browser 3 window layout, names and functions.
Menu bar
Folder tree pane
Tool bar Thumbnail pane
Address bar Checked images pane
Preview pane Image data pane Status bar
Menu bar (p.24)
Tool bar (p.28)
Address bar
The address of the currently displayed folder appears here.
Folder tree pane
Internal data on your computer appears here as a folder tree. Select the folder containing saved image files here.
Also, the Folder tree pane handles operations such as creating new folders, deleting folders and moving/copying folders.
Thumbnail pane
Files in the folder selected in the Folder tree pane appear here. Select from five file display methods. When a thumbnail image is selected in the
Thumbnail pane, the image appears in the Preview pane and the image data appears in the Image data pane.
Checked images pane
All images with check marks in the Thumbnail pane are displayed here.
Switch between Thumbnails and Details by right-clicking the Checked images pane. When a thumbnail image is selected in the Checked images pane, the image appears in the Preview pane and the image data appears in the Image data pane.
Preview pane
An image selected in the Thumbnail pane appears in this pane.
Image data pane
The image data for the image selected in the Thumbnail pane appears here.
Place the cursor over a cell dividing line at the top of the pane and drag it to resize the cell. (For Macintosh, drag at the applicable position to resize the cell.)
The following items appear:
Data
Lens name
Focal length
Shutter speed
Aperture
Capture mode
Contents
Shows lens type
Focal length (in mm)
Shutter speed when shooting
(in seconds)
Aperture value when shooting
Capture mode when shooting
Example smc PENTAX-FA
50mmF1.4
50mm
1/250sec
Metering mode
White balance
Color temperature
Fine tune A-B
Fine tune M-G
Sensitivity
Recorded pixels
Quality
Exposure compensation
Metering mode when shooting
White balance mode
Color temperature (units: Kelvin) *1
Amber - Blue fine tune *1
Magenta - Green fine tune *1
ISO sensitivity when shooting
Number of recorded pixels
Recorded quality
Exposure compensation
F8.0
Auto Picture
(Normal)
Multi-segment
Auto
-----
-----
-----
200
3008×2000
Better
0.0
21
22
Data Contents Example
Autofocus mode Autofocus mode when shooting Single AF
Autofocus area mode Autofocus area mode when shooting Auto
Color space
Image tone
Saturation
Color space mode
Photo finish settings
Saturation settings sRGB
Bright
Std.
Sharpness
Contrast
Drive mode
Sharpness settings
Contrast settings
Std.
Std.
Drive mode settings when shooting Single-frame shooting
Flash mode
Bracket
Multi-exposure
Shake Reduction
Firmware/Software version
Flash mode settings when shooting
Bracket settings when shooting
Flash Off
Multi-exposure settings when shooting Off
Shake Reduction Setting On
Version of the software when images were last saved *2
Shooting date/time Date and time shot
Off
K110D Ver 1.00
06/25/2006
10:00:00
Camera model Camera name PENTAX K110D
*1: Processing details when using PENTAX PHOTO Laboratory 3 appear.
*2: Information on the camera’s firmware appears for captured images.
Status bar
The status of PENTAX PHOTO Browser 3 appears.
The following items appear:
• Number of objects in the selected folder, total folder size (not including subfolders) or number of selected objects and total size
• Available disk space for selected drive
• Progress status when loading thumbnails
• Identification of local disk, removable disk and network
Showing/Hiding Panes and Bars
Show/hide panes and bars using the [View] menu (p.25). A check is displayed in the box ( ) in front of the item for currently showing items.
Check these to show and uncheck to hide.
Alternatively, click the [Close] button ( ) on the top right of each pane to close.
Removing and Moving the Tool Bar and Address Bar
The Tool bar and Address bar can be removed or moved from the Browser screen.
Remove the Tool bar and Address bar
To remove a bar, double-click the left edge of the bar in the Browser screen. Alternatively, click the left edge of the bar and drag to the
Thumbnail pane or Folder tree pane.
The bar is removed from the Browser screen.
Add the Tool bar and Address bar in the Browser screen
Double-click the bar to return the bar to the original location. Alternatively, drag the bar back to the original location.
The bar returns to the Browser screen.
Move the Tool bar and Address bar
Click the left edge of the bar and drag to the new location.
The bar is moved to the new location.
The Address bar can only be moved below the Menu bar, next to the Tool bar, or to the top/bottom of the Thumbnail pane.
23
Select [Default Position] on the [View] menu or click (Default Position) on the Tool bar to return the bar to its default position.
Removing and Moving Panes
The Folder tree pane, Preview pane, Image data pane and Checked images pane can be removed from the Browser screen.
Remove panes
To remove a pane, double-click the top edge of the pane in the Browser screen. Alternatively, click the top edge of the pane and drag to the
Thumbnail pane.
The pane is removed from the Browser screen.
24
Add a pane in the Browser screen
Double-click the Title bar of the pane to return to the original location.
Alternatively, click the Title bar and drag the pane back to the original location.
The pane returns to the Browser screen.
Move panes
To move a pane, select pane and drag to the new location.
The pane is moved to the new location.
Select [Default Position] on the [View] menu or click (Default Position) on the Tool bar to return the bar to its default position.
Menu Bar
This executes functions or sets various settings of PENTAX PHOTO
Browser 3.
For Macintosh, the Menu bar appears at the top of the desktop.
[File] menu
Create New Folder
Open
Close All
Rename
Rename All
Page Setup
Properties
Exit
This creates a new folder in the location specified on the Folder tree pane. (p.52)
This opens the selected folder. For an image selected in the Thumbnail pane, it displays the image in a new Main image view window.
This closes all images open in the Main image view windows.
This changes the name of the selected file or folder.
(p.50)
This changes the names of all selected files. (p.51)
This sets printing options such as margins, headers/ footers, and number of copies. (p.62)
This prints the selected image file. (p.58)
The properties of the selected file or folder appear.
(p.54)
This closes PENTAX PHOTO Browser 3.
(For Macintosh, select [Quit PENTAX PHOTO
Browser] on the [PENTAX PHOTO Browser] menu.)
[Edit] menu
Undo
Cut
This undoes the previous file operation.
This prepares the selected file or folder to be moved to a different location. (p.48)
Copy
Paste
Delete
This copies the selected file or folder. (p.48)
This copies the cut or copied file or folder into the selected folder. (p.48)
This deletes the selected folder or image. When a folder is deleted, all files in the folder are also deleted.
(p.50)
Move to Folder
Copy to Folder
Check Selected Image
This moves the selected file to another folder.
This copies the selected file to another folder.
This checks the selected file. The checked file is displayed in the Checked images pane. (p.33)
Uncheck Selected Image This unchecks the selected file.
Uncheck All This unchecks all images.
Select All
Invert Selection
This selects all files within the currently open folder.
This unselects all selected files and selects all unselected files within the currently open folder.
[View] menu
Tool Bar
Folder Tree
Preview
Address Bar
Status Bar
Image Data
Checked Images
Default Position
Filter
This shows or hides the Tool bar.
This shows or hides the Folder tree pane.
This shows or hides the Preview pane.
This shows or hides the Address bar.
This shows or hides the Status bar.
This shows or hides the Image data pane.
This shows or hides the Checked images pane.
This returns each pane to its default position.
This sets the type of file that appears in the
Thumbnail pane. Select from the following four items:
PENTAX Images : Images captured with your
PENTAX camera
Other Images : Images other than those captured with your PENTAX camera
Folders
Others
(JPEG, TIFF, BMP, PNG, PICT)
: Folders
: Files that PENTAX PHOTO
Browser 3 does not support
25
26
[View] menu
Sort by
Thumbnail Caption
Thumbnail (Smallest)
Thumbnail (Small)
Thumbnail (Medium)
Thumbnail (Large)
Details
Detailed View Options
Go To
Slideshow
This specifies the order in which files and folders appear in the Thumbnail pane and specifies ascending or descending order.
You can select from File Name, File Size, File Date/
Time, File Type, Shooting Date/Time, Image Size,
Camera Name, Lens Name, Checkmark and Lock
Status.
This sets the caption of file that appears in the
Thumbnail pane. File Name, File Date and File Time appear by default.
The smallest size thumbnail appears in the
Thumbnail pane.
A small size thumbnail appears in the Thumbnail pane.
A medium size thumbnail appears in the Thumbnail pane.
A large size thumbnail appears in the Thumbnail pane.
Image details appear in the Thumbnail pane without an image.
Sets the information displayed in the Thumbnail pane when set to [Details].
Select [Back] to return to the previously opened folder, [Forward] to move forward one folder, and
[Up] to move up one folder in the directory tree.
Selected or checked images appear in order. (p.55)
If only one image is selected or no images are selected (click the background of the Thumbnail pane), all images in the current folder are displayed in order.
[Tool] menu
Save Image Data List
Rotate
Extract JPEG
Save as DNG
Use the check boxes to save the image data from multiple folders into one CSV format file. If no images are selected or checked, all the image data in the current folder is saved. (p.53)
Rotates the selected image 90° left or right. (p.34)
Extracts the JPEG data from a selected PENTAX
RAW file and saves it as a separate file.
Converts a selected PENTAX RAW file into a DNG
RAW file.
[Tool] menu
Easy Image Transfer
PENTAX PHOTO
Laboratory
PENTAX REMOTE
Assistant
Options
*1
Automatically searches for DCF images in the camera or removable disk drive connected to the computer and copies the images to the computer.
This starts PENTAX PHOTO Laboratory 3. You can specify the image files to be opened from PENTAX
PHOTO Browser 3. (p.80)
This starts PENTAX REMOTE Assistant.
PENTAX REMOTE Assistant can be used by installing it in the same folder as PENTAX PHOTO
Browser 3 and using it together with w.
This sets various settings for PENTAX PHOTO
Browser 3. (p.65)
[Help] menu
Help Topics
Index
What’s This?
About PENTAX PHOTO
Browser
This shows PENTAX PHOTO Browser 3 help contents.
This shows PENTAX PHOTO Browser 3 help index search. (This command is not available for
Macintosh.)
This shows pop-up tips when an icon or command button is clicked.
This shows PENTAX PHOTO Browser 3 version information. (For Macintosh, select [About PENTAX
PHOTO Browser] on the [PENTAX PHOTO Browser] menu.)
*1: PENTAX REMOTE Assistant is not included in the CD-ROM (S-SW53). The latest version can be downloaded from the PENTAX website.
This menu function can be used if PENTAX REMOTE Assistant is already installed.
27
28
Tool Bar
Frequently used functions are provided as Tool bar buttons. You can execute these functions easily from the Tool bar.
If, after resizing the Browser screen, part of the Tool bar is not visible, you can click the downward pointing arrow on the right edge of the Tool bar to select a tool that is not displayed.
1 2 3 4 5 6 7 8 9 10 11 12 13
3
14 15 16 17 18 19 20 21 22 23 24 25 26 27
Number Icon (button)
1
2
Back
Forward
Content
This opens the previously opened folder.
Click the downward pointing arrow to the right of the [Back] icon to display a history of previously opened folders. (For Macintosh, hold down this icon to display the history.)
This opens the folder which was open before using the [Back] button.
Click the downward pointing arrow to the right of the [Forward] icon to display a history of previously opened folders. (For Macintosh, hold down this icon to display the history.)
This moves up one folder in the directory tree.
Up
4
5
Rename All
This changes the names of all selected files.
(p.51)
This prints the selected image file. (p.58)
6 This undoes the previous file operation.
Undo
Number Icon (button)
7
Cut
8
9
10
11
12
13
14
15
16
Content
This prepares the selected file or folder to be moved to a different location. (p.48)
This copies the selected file or folder. (p.48)
Copy
This copies the cut or copied file or folder into the selected folder. (p.48)
Paste
This deletes the selected file or folder. (p.50)
Delete
The selected image file appears in the Main image view window. (p.31)
View Image
Filter
Sort by
Click to select the type of file that appears in the
Thumbnail pane. Select from the following four items:
PENTAX Images : Images captured with your
PENTAX camera
Other Images : Images other than those captured with your PENTAX camera (JPEG, TIFF, BMP,
Folders
Others
PNG, PICT)
: Folders
: Files that PENTAX PHOTO
Browser 3 does not support
Click to select the sort key and ascending/ descending order from the pull-down menu.
Thumbnails are sorted according to the selected order.
The smallest size thumbnail appears in the
Thumbnail pane. (p.31)
Thumbnail
(Smallest)
A small size thumbnail appears in the Thumbnail pane. (p.31)
Thumbnail (Small)
Thumbnail (Medium)
A medium size thumbnail appears in the
Thumbnail pane. (p.31)
29
30
Number Icon (button)
17
18
19
20
21
22
23
24
25
26
27
Content
A large size thumbnail appears in the Thumbnail pane. (p.31)
Thumbnail (Large)
Image details appear in the Thumbnail pane without an image.
Details
This returns the window layout of PENTAX
PHOTO Browser 3 to the default settings.
Default Position
Slideshow
Rotate
Save Image Data
List
Easy Image Transfer
This saves additional information for specified image files in a single CSV-format file. (Additional information can be saved only for PENTAX
PHOTO Browser 3-compatible image files.)
(p.53)
Automatically searches for DCF images in the camera or removable disk drive connected to the computer and copies the images to the computer.
(p.47)
This starts PENTAX PHOTO Laboratory 3. You can specify the image files to be opened from
PENTAX PHOTO Browser 3. (p.71)
PENTAX PHOTO
Laboratory
PENTAX REMOTE
Assistant
This starts PENTAX REMOTE Assistant.
PENTAX REMOTE Assistant can be used by installing it in the same folder as PENTAX
PHOTO Browser 3 and using it together with w .
This sets various settings for PENTAX PHOTO
Browser 3. (p.65)
Options
This rotates the selected image 90° left or right.
(p.34)
This shows PENTAX PHOTO Browser 3 help contents.
Help Topics
Selected or checked images appear in order.
(p.55)
Viewing Images
Display the images saved on your computer in the Preview pane or Main image view window.
31
Displaying Thumbnail Pane Images in the Preview Pane
1
In the folder tree, select the folder containing the image file to view.
Images in the selected folder appear as thumbnails in the Thumbnail pane.
You can change the size of the thumbnail image. In the [View] menu, select
[Thumbnail (Smallest)], [Thumbnail (Small)], [Thumbnail (Medium)], or
[Thumbnail (Large)]. Alternatively, click the , , or icon on the Tool bar.
2
Select an image in the Thumbnail pane.
The selected image appears in the Preview pane.
When the Preview pane is right-clicked, the following menu appears.
Preview Previous
Preview Next
Auto Size
Fixed Size
Life Size
Shows previous image.
Shows next image.
Fits image to the size of the Preview pane.
Image appears in a 320-dot window (aspect ratio is maintained).
Shows image size at 100% zoom.
32
Images in the Checked image pane (p.21) can also be displayed in the Preview pane.
Displaying Thumbnail Pane Images in the Main Image View Window
Follow the steps below to open the Main image view window.
1
Select an image in the Thumbnail pane of the Browser screen and click the icon on the Tool bar.
The Main image view window opens and the selected image appears.
• Multiple images may be selected in the Thumbnail pane and opened in the
Main image view window. When multiple images are selected, the Main image view window may be set in [Options] to show all images in one window or multiple windows (p.42). Images are shown in one window by default.
Images in the Checked images pane can also be displayed in the Main image view window (p.33).
• The following methods can also be used to open the Main image view window.
– Select an image in the Thumbnail pane and then select [Open] on the [File] menu.
– Select [Main Image View] on the menu after right-clicking an image in the
Thumbnail pane. (For Macintosh, display the menu by clicking the image while holding down the control key.)
– Double-click an image in the Thumbnail pane.
– Drag and drop the image file from the Desktop to the opened Main image view window.
– Select [Main Image View] on the menu after right-clicking an image in the
Checked images pane. (For Macintosh, display the menu by clicking the image while holding down the control key.)
– Double-click an image in the Checked images pane.
RAW file display
PENTAX PHOTO Browser 3 allows you to select between [Simple display] and [Auto RAW display] when displaying RAW files in the Main image view window. (p.69)
Simple display : The compressed data in the RAW file appears.
Images can be viewed quickly.
Auto RAW display : The RAW file is processed. It takes time to display the
RAW data, but the image quality is superior.
Select from three levels for the processing ratio on the
[Main Image View] tab of the [Options] dialog. (p.69)
Displaying Images in the Checked Images Pane
Each image thumbnail displayed in the Thumbnail pane (in the left column of the list of thumbnails when [Details] is selected) shows a Check box indicating whether an image is registered to the Checked images pane.
When this box is clicked to display a check mark, that image becomes a
“checked image”.
Each time the Check box is clicked, the check mark group switches among
Checkmark 1, Checkmark 2 and Checkmark 3. Alternatively, select an image in the Thumbnail pane and then select a check mark group with
[Check Selected Image] on the [Edit] menu.
Checked images are registered to the tab corresponding to the check mark group in the Checked images pane. Images stored in different folders that are tagged with the same check mark are registered to the same tab. The thumbnails in the Checked images pane are color-coded according to the folder where the images are saved. There are seven colors that are used for color-coding the thumbnails, and if there are thumbnails from eight or more different folders with the same check mark, the colors to indicate the folders are repeated. You can select from seven colors using the [Options] dialog on the [Tool] menu.
When the Checked images pane is right-clicked, the following menu appears.
Item
Main Image View
Slideshow
Thumbnails
Details
Description
Opens the image in a Main image view window. Multiple images may be opened simultaneously.
Images in the Checked images pane are displayed in
Slideshow. Opens the Slideshow screen and Slideshow control panel.
PENTAX PHOTO
Laboratory
PENTAX PHOTO Laboratory 3 starts. Select a RAW file in the Checked images pane and click this button to open the image in PENTAX PHOTO Laboratory 3.
Save Image Data List Saves the image data list of images selected in the
Checked images pane in CSV format.
Print The [Print] dialog appears with various print settings.
Rotate
Sort by
Rotates the selected image 90° left or right. (p.34)
Sets the order of files or folders displayed in the
Checked images pane.
Displays the checked images with thumbnails.
Displays the checked images in a list.
*2
33
34
Item
Uncheck Selected
Image *1
Uncheck All
Move to Folder
Copy to Folder
Extract JPEG
Save as DNG
Description
Removes the check mark from an image selected in the
Checked images pane. This cancels the registration of the image in the Checked images pane.
Removes check marks from all images in an active check mark group. This cancels the registration of the image in the Checked images pane.
Moves the image selected in the Checked images pane to another folder.
Copies the image selected in the Checked images pane to another folder.
Extracts the JPEG data from a PENTAX RAW file selected in the Checked images pane and saves it as a separate file.
Converts a PENTAX RAW file selected in the Checked images pane into a DNG RAW file.
*1: This can only be selected from the right-click menu after selecting an image.
*2: When [Details] is selected, the checked images are sorted by folder and displayed in a list.
Rotating Images in the Thumbnail Pane or Checked Images Pane
1
Select an image in the Thumbnail pane or Checked images pane.
2
Select [Rotate] from the [Tool] menu.
Select [Rotate (90° Left)] or [Rotate (90° Right)] to rotate the image and save it as the same file or as a new file.
Select [Rotate Display (90° Left)] or [Rotate Display (90° Right)] to rotate the image in the Browser screen (Thumbnail pane, Checked images pane or Preview pane) or Main image view window. [Rotate Display (90°
Left)] and [Rotate Display (90° Right)] are available when [Yes] is selected for [Use Image Orientation Information] on the [Browser] tab of the [Options] dialog. This is not available for images that do not have orientation information.)
Alternatively, select [Rotate] on the toolbar, or from the menu displayed after right-clicking the thumbnail in the Thumbnail pane or the Checked images pane.
Main Image View Window
Menu bar Tool bar
35
Image data pane Image view area
Menu bar
This executes functions or sets various settings of the Main image view window.
[File] menu
View Browser
Open
Save as
Page Setup
Properties
Close
Close All
This shows the file browsing screen.
This opens the [Open] dialog to select the file to open.
If a check mark is next to [Open in new window], a new Main image view window opens and the selected image appears when a file is selected and
[Open] is clicked. (p.31)
This saves the image being viewed in JPEG, TIFF,
BMP, PNG or PICT format. (p.45)
This sets the page setup information for printing the selected image. (p.62)
This prints the current image. (p.58)
Image file data appears. (p.41)
Closes the Main image view window.
Closes all Main image view windows.
36
[View] menu
Tool Bar
Image Data
Previous Image
Next Image
Synchronous Display
Slideshow
Fit to Window
Enlarge
Reduce
Life size
Rotate View (90° Left)
Rotate View (90° Right)
Arrange Windows
[Tool] menu
Undo
Crop
Auto Image Fix
Rotate
PENTAX PHOTO
Laboratory
Options
This shows or hides the Tool bar.
This shows or hides the Image data pane.
This displays the previous image when multiple images are displayed in the Main image view window or when a folder contains multiple images. This button cannot be selected if there are no images to view.
This displays the next image when multiple images are displayed in the Main image view window or when a folder contains multiple images. This button cannot be selected if there are no images to view.
This sets whether to synchronize operations with other Main image view windows.
Selected or checked images appear in order. (p.55)
This fits the image to the window size. (p.40)
This doubles the view magnification of the image appearing in the image view area.
The maximum view magnification is 4 times. (p.40)
This halves the view magnification of the image appearing in the image view area.
The minimum view magnification is 1/16. (p.40)
This sets the view magnification of the image appearing in the image view area to life size. (p.40)
This rotates the image 90° left. This does not affect the image file.
This rotates the image 90° right. This does not affect the image file.
This arranges multiple Main image view windows.
This undoes the previous file operation.
This cuts a specified area of an image and deletes unnecessary portions.
This automatically adjusts the brightness, contrast and color tone. Select [Strong] or [Slight].
This rotates the image 90° left or right. (p.43)
This starts PENTAX PHOTO Laboratory 3. RAW image files displayed in the Main image view window can be opened in PENTAX PHOTO Laboratory 3.
(p.71)
This sets various settings for PENTAX PHOTO
Browser 3. (p.65)
[Help] menu
Help Topics
Index
What’s This?
About PENTAX PHOTO
Browser
This shows PENTAX PHOTO Browser 3 help contents. (For Macintosh, select [PENTAX PHOTO
Browser Help].)
This shows PENTAX PHOTO Browser 3 help index search. (This command is not available for
Macintosh.)
This shows pop-up tips when an icon or command button is clicked.
This shows PENTAX PHOTO Browser 3 version information. (For Macintosh, select [About PENTAX
PHOTO Browser] on the [PENTAX PHOTO Browser] menu.)
Tool bar
Frequently used functions are provided as Tool bar buttons. You can execute these functions easily from the Tool bar.
Remove the check mark next to [Tool Bar] on the [View] menu to hide the
Tool bar.
1 2 3 4 5 6 7 8 9 10 11 12 13
37
Number Icon (button)
1
View Browser
2
Open
3
14 15 16 17 18 19 20 21 22 23
Content
This displays the Browser screen.
This opens the [Open] dialog to select the file to open. If a check mark is next to [Open in new window], a new Main image view window opens and the selected image appears when a file is selected and [Open] is clicked.
This saves the image being viewed in JPEG,
TIFF, BMP, PNG or PICT format. (p.45)
Save as
38
Number Icon (button)
4
5
6
7
8
9
10
11
12
13
14
15
Content
This prints the current image. (p.58)
This shows selected file properties. (p.41)
Properties
Previous Image
Next Image
This displays the previous image when multiple images are displayed in the Main image view window or when a folder contains multiple images. This button cannot be selected if there are no images to view.
This displays the next image when multiple images are displayed in the Main image view window or when a folder contains multiple images. This button cannot be selected if there are no images to view.
Sets whether to synchronize operations with other Main image view windows.
Synchronous Display
Selected or checked images appear in order.
(p.55)
Slideshow
This fits the image to the window size. (p.40)
Fit to Window
Reduce
Enlarge
Life size
Zoom
This halves the view magnification of the image appearing in the image view area.
The minimum view magnification is 1/16. (p.40)
This doubles the view magnification of the image appearing in the image view area.
The maximum view magnification is 4 times. (p.40)
This sets the view magnification of the image appearing in the image view area to life size (1:1).
(p.40)
The current view magnification appears. You can also set the view magnification by selecting it from the pull-down list, or by directly inputting the magnification. (p.40)
This rotates the image appearing in the image view area 90° to the left (counterclockwise).
(p.42)
Rotate View
(90° Left)
Number Icon (button)
16
Rotate View
(90° Right)
17
Undo
18
Crop
19
Auto Image Fix
20
Content
This rotates the image appearing in the image view area 90° to the right (clockwise). (p.42)
This undoes the previous file operation.
This cuts a specified area of an image and deletes unnecessary portions.
Click and select or automatically adjust the brightness, contrast and color tone.
Select [Strong] or [Slight].
This rotates the image 90° left or right. (p.43)
Rotate
21
22
23
PENTAX PHOTO
Laboratory
Options
This starts PENTAX PHOTO Laboratory 3.
Specify the applicable image files within the
Thumbnail pane of PENTAX PHOTO Browser 3.
(p.71)
The PENTAX PHOTO Browser 3 setup screen appears. This sets various settings for PENTAX
PHOTO Browser 3. (p.65)
This shows PENTAX PHOTO Browser 3 help contents.
Help Topics
Image view area
The image selected in the Thumbnail pane or Checked images pane of
PENTAX PHOTO Browser 3 appears.
Image data pane
The image data appears for the image appearing in the image view area.
(p.21)
Place the cursor over a cell dividing line at the top of the pane and drag it to resize the cell. (For Macintosh, drag at the applicable position to resize the cell.)
39
40
Hiding the Tool Bar and Image Data Pane
You can set whether to show or hide the Tool bar and Image data pane in the Main image view window.
1
Select [Tool Bar] or [Image Data] from the [View] menu in the Main image view window and uncheck the item.
The Tool bar or Image data pane is hidden.
To display the Tool bar or Image data pane, select [Tool Bar] or [Image Data] from the [View] menu in the Main image view window and check the item.
Changing the View Magnification
You can change the image view magnification of the image appearing in the image view area.
1
Select [Fit to Window], [Enlarge], [Reduce] or [Life size] from the [View] menu in the Main image view window.
Alternatively, click the , , or icon on the Tool bar.
The image view magnification can be adjusted from 1/16 to 4 times.
Enlarged view
Reduced view
You can also enlarge or reduce the view by directly inputting the numerical value of the magnification in the View Magnification box on the Tool bar.
Displaying Image Properties
You can display file data for the image file appearing in the Main image view window. (p.54)
41
42
Synchronizing Multiple Main Image View Windows
Synchronizes up to four Main image view windows. Synchronizes zoom, position and frame advance operations.
1
Select [Synchronous Display] from the [View] menu in the
Main image view windows.
Alternatively, click the [Synchronous Display] icon on the
Tool bar or select [Synchronous Display] on the menu after right-clicking the Image view area.
The zoom, position and frame advance operations for the windows with
[Synchronous Display] selected are synchronized.
• When multiple Main image view windows are synchronized, the position of an individual image can be changed by dragging that image while pressing the Alt key.
• If you do not want the same image displayed in multiple Main image view windows at the same time during frame advance with the Main image view windows synchronized, use the settings on the [Options] dialog.
Rotating the Image View
Rotates the image view 90° left or right.
1
Select [Rotate View (90° Left)] or [Rotate View (90° Right)] from the [View] menu in the Main image view window.
Alternatively, click the or icon on the Tool bar.
The image appears rotated.
To save the rotated image, use [Rotate] on the [Tool] menu. (p.43)
Saving a Rotated Image
Data of the displayed image is rotated 90° left or right and saved. Rotation of the image may take time depending on the size of the image.
A warning message appears when closing the Main image view window without saving the image or when clicking .
1
Select [Rotate (90° Left)] or [Rotate (90° Right)] from
[Rotate] on the [Tool] menu in the Main image view window.
43
Alternatively, select [Rotate (90° Left)] or [Rotate (90° Right)] from the
Tool bar. (p.39)
2
Specify [Save in], [File name] and [Save as type], and then click [Save].
The image is rotated and saved.
• When performing lossless rotation of an unprocessed JPEG image, the
[Rotate] dialog opens before the rotated image appears.
• The [Rotate] dialog does not appear for RAW files and processed JPEG images. To save rotated images, select [Save as] from the [File] menu in the
Main image view window or click the icon on the Tool bar.
44
Cropping an Image
You can cut (crop) portions of an image displayed in the Main image view window.
1
Select [Crop] from the [Tool] menu in the Main image view window.
Alternatively, click the icon on the Tool bar.
The [Crop] dialog appears.
2
Set the cropping area.
Item
Cropping Aspect Ratio
Cropping Area
Description
Maintain original aspect ratio:
Maintains aspect ratio of original image.
Specify paper size : Uses paper size setting.
Specify aspect ratio : Sets desired aspect ratio.
Do not specify aspect ratio:
Does not set condition for aspect ratio of cropping area.
Center
*1
Top Left
*1
: Centers cropping area in middle of original image.
: Sets cropping area based on
Bottom Right
*1 top left coordinates.
: Sets cropping area based on bottom right coordinates.
Top left coordinates : Sets top left coordinates of
Cropping Area cropping area.
: Sets size of cropping area.
Bottom right coordinates:
Sets bottom right coordinates
Original size of cropping area.
: Displays number of pixels of original image.
*1: The cropping area is set by specifying the values, not by dragging the mouse.
Click [Reset] to return the set values to their initial settings.
3
Click [OK].
Saving an Image
You can save the displayed image using any of the following file formats.
RAW files can be saved with any of these formats to view the image with image processing software.
JPEG
TIFF (8-bit)
: JPEG image with image data
: TIFF image with image data
TIFF (16-bit) : High quality TIFF image with image data
BITMAP : BMP image without image data
PNG
PICT
: PNG image without image data
: PICT image without image data
1
Select [Save as] from the [File] menu in the Main image view window or click the icon on the Tool bar.
The [Save as] dialog appears.
If the RAW file is viewed in Simple display or is reduced, a message appears asking if you wish to return the image to full size. If [No] is selected, the image is saved as it is displayed. The quality is reduced compared to that of an image processed to full size.
2
Specify [Save in], [File name] and [Save as type], and then click [Save].
45
The image is saved.
46
Managing Image Files and Folders
Extracting a Full-size JPEG File from a RAW File
A preview JPEG file can only be extracted from a PENTAX RAW file (PEF format RAW file shot with a PENTAX SLR camera). It cannot be extracted from a DNG RAW file.
1
Select an image for JPEG extraction in the Thumbnail pane or Checked images pane of PENTAX PHOTO
Browser 3.
2
Select [Extract JPEG] from the [Tool] menu.
Alternatively, right-click the image for JPEG extraction and select [Extract JPEG].
3
Specify the save destination and file name.
• To save the file with the file name of the original file, select [Use original file name]. For example, if the original file name is “IMGP0001.pef”, the file name of the extracted JPEG file will be “IMGP0001.jpg”.
• To save the file with a different file name, select [Rename]. In this case, specify [Base file name] (file name prefix), [Number of digits] (number of digits for number continued in base file name) and [Start number] (number continued in base file name). When using [Extract JPEG] for multiple images, the file name assigned to each image consists of the [Base file name] and
[Start number] in incremental order.
Converting a RAW File to a DNG RAW File
DNG (Digital Negative) is a general-purpose, publicly-available RAW file format designed by Adobe Systems.
1
Select an image to convert to a DNG RAW file in the
Thumbnail pane or Checked images pane of PENTAX
PHOTO Browser 3.
2
Select [Save as DNG] from the [Tool] menu.
Alternatively, right-click the image to be converted to a
DNG RAW file and select [Save as DNG].
3
Specify the save destination and file name.
• To save the file with the file name of the original file, select [Use original file name]. For example, if the original file name is “IMGP0001.pef”, the file name of the converted DNG file will be “IMGP0001.dng”.
• To save the file with a different file name, select [Rename]. In this case, specify [Base file name] (file name prefix), [Number of digits] (number of digits for number continued in base file name) and [Start number] (number continued in base file name). When using [Save as DNG] for multiple images, the file name assigned to each image consists of the [Base file name] and
[Start number] in incremental order.
• DNG RAW files cannot be opened with PENTAX PHOTO Browser 3 or
PENTAX PHOTO Laboratory 3.
47
Transferring Image Files from SD Memory Card
1
Check that the digital camera, SD Memory Card reader or
DCF-compatible removable disk is connected to your computer, and then select [Easy Image Transfer] on the
[Tool] menu.
Alternatively, click the icon on the Tool bar.
The digital camera or DCF-compatible removable disk with image files is recognized.
2
Select the drive with the images you want to transfer and click [Next].
The message [Could not find DCF media.] appears if no digital camera or DCFcompatible removable disk is connected to the computer or the connected device has no image files.
48
3
Select the folder with the images you want to transfer and click [Next].
After selecting [Transfer selected folder(s)], select a folder from the list.
To transfer all images in the selected drive, select [Transfer all images].
4
Select the destination folder and click [Transfer images].
To create a new destination folder, select the location where the folder is to be created and click [New Folder].
5
After the images have been transferred, click [Finish].
Moving/Copying Image Files
1
In the Thumbnail pane of the PENTAX PHOTO Browser 3 window, select the thumbnail image to move or copy.
2
Select [Cut] or [Copy] from the [Edit] menu.
Alternatively, click the or icon on the Tool bar.
3
Specify the destination folder for moving or copying in the
Folder tree pane.
4
Select [Paste] from the [Edit] menu.
Alternatively, click the icon on the Tool bar.
49
The image file is moved or copied to the specified folder.
• You can also move an image by dragging and dropping a thumbnail image to the destination folder.
To copy, hold down the Ctrl key while you drag and drop the file. (For
Macintosh, hold down the Option key while you drag and drop the file.)
• Use the same procedure to move or copy a folder. In the Folder tree pane, specify the folder to move or copy. The specified folder is moved or copied into the destination folder.
50
Deleting Image Files/Folders
1
In the Thumbnail pane of the PENTAX PHOTO Browser 3 window, select the thumbnail image to delete.
Alternatively, select the folder to delete in the Folder tree pane.
2
Select [Delete] from the [Edit] menu.
Alternatively, click the icon on the Tool bar.
A delete confirmation screen appears.
3
Click [Yes].
The image file or folder is deleted.
Changing Image File/Folder Names
1
In the Thumbnail pane of the PENTAX PHOTO Browser 3 window, select the thumbnail image or folder to be renamed.
Alternatively, select the thumbnail image or folder to be renamed in the Folder tree pane.
2
Select [Rename] from the [File] menu.
Alternatively, directly click the file or folder name in the
Thumbnail pane or Folder tree pane.
The file or folder name is ready to be changed.
51
3
Input the file or folder name.
The image file or folder is renamed.
Renaming All File Names
1
In the Thumbnail pane of the PENTAX PHOTO Browser 3 window, select or check the thumbnail images to be renamed.
Select [Select All] from the [Edit] menu to select all images in the
Thumbnail pane. Images from more than one folder cannot be selected.
2
Select [Rename All] from the [File] menu.
Alternatively, click the icon on the Tool bar.
The [Rename All] dialog appears.
52
3
Confirm the content, and input information as needed.
Item
Base file name
Number of digits
Description
Specify name to add to file names. “IMGP” is added by default.
Specify the number of digits to add to file names. 1 to
5 digits can be specified. 4 digits are specified by default (example: IMGP1234.pef). When files exist in the folder with the specified base file name, the number of digits increases if the maximum number of files is exceeded.
Put base file name last When this option is checked, the file name specified for
[Base file name] comes after sequential file numbering
(example: 0123IMGP.pef). Base file name is added to the beginning by default.
Start number Sets the start number. When files exist in the folder with the same specified base file name, the numbering automatically starts from the number next to the highest number of the existing file. If there is no file with the specified base file name, numbering starts at 1.
4
Click [OK].
All files are renamed to the specified name.
Creating a New Folder
1
In the Folder tree pane of the PENTAX PHOTO Browser 3 window, select the folder where to create a new folder.
Alternatively, select the Thumbnail pane.
2
Select [Create New Folder] from the [File] menu.
A new folder is created under the specified folder or in the Thumbnail pane.
Saving a List of Image Data
Use the check boxes to save the image data from multiple folders into one
CSV format file.
• When saving image data from the Thumbnail pane, the image files in the current folder displayed in the pane can be saved (selectable).
• When saving image data from the Checked images pane, the images in the active tab displayed in the pane can be saved.
1
Select [Save Image Data List] from the [Tool] menu in the
PENTAX PHOTO Browser 3 window or click the icon on the Tool bar.
The [Save Image Data List] dialog appears.
53
2
Specify the file name and save destination, and then click
[Save].
The image data is saved in CSV format.
When thumbnail images are checked, data is saved only for those images.
Image data is also saved for checked images contained in other folders. When a thumbnail image is selected, only data for the selected image is saved.
54
Displaying Properties of Image Files/Folders
The contents of the [Properties] dialog depends on the version of the operating system currently running. Refer to Help in the operating system for details on the [Properties] dialog settings.
1
In the Thumbnail pane of the PENTAX PHOTO Browser 3 window, select the thumbnail image for which properties are to be shown.
Alternatively, in the Folder tree pane, select the folder for which properties are to be shown.
2
Select [Properties] from the [File] menu.
The [XXX Properties] ([XXX Info] for Macintosh) dialog appears.
For Windows For Macintosh
3
Confirm the content.
4
Click [OK].
The [Properties] dialog closes.
For Macintosh, click to close the [Info] dialog.
Continuous Image Playback in a Slideshow
This section explains how to set up and operate the slideshow.
1
Select an image or folder in the PENTAX PHOTO Browser
3 window.
2
Select [Slideshow] from the [View] menu or click the icon on the Tool bar.
The Slideshow screen and Slideshow control panel open.
Slideshow screen
55
Slideshow control panel 1 2 3 4 5 6 7 8
56
2
3
4
5
6
Number Icon (button)
1 First Image
7
8
Rewind
Previous Image
Pause
Play
Fast Forward
Last Image
Stop
Content
Returns to the first image. When this is pressed during a slideshow, the first image appears and the slideshow pauses.
Rewinds slideshow. When this is pressed during a slideshow, the next image appears and the slideshow pauses.
Slideshow is played in reverse order.
Pauses slideshow.
Plays slideshow.
Fast-forwards slideshow. When fast-forwarding during a slideshow, the next image appears and the slideshow pauses.
Shows last image. You can use this during a slideshow. The last image appears and the slideshow pauses.
Stops slideshow.
3
Press the [Play] button.
The slideshow starts.
Slideshow Settings
When viewing the slideshow, select between a single window and a dual window. Additionally, view the slideshow in single full screen or dual full screen mode (only if the computer is compatible with dual screen display).
Slideshow display settings and the image data displayed for each image in the slideshow can be modified from the [Browser] tab in the [Options] dialog. You can choose whether to display the image data during the slideshow by checking the [Yes] or [No] check box for [Display Image Data
During Slideshow]. (p.67)
The order in which frames are advanced during the slideshow is determined by the current [Sort by] setting in the [View] menu.
Select from one of the four display patterns below.
Single window
Slideshow
Single full screen
A
A
Dual window
Primary Secondary
A B
Dual full screen
A B
Image display order for dual window
When using dual window or dual full screen in PENTAX PHOTO Browser
3 slideshow, you can select the display method for images to be displayed on the primary and secondary monitors.
Advance in order
Primary
(A) n n+1 n+2 n+3
Secondary
(B) n+1 n+2 n+3 n+4
Advance alternate
Primary
(A) n
Secondary
(B) n-1 n n+1 n+2 n+1 n+2 n+3
57
58
Advance two frames
Primary
(A) n
Secondary
(B) n+1
Fix image to primary monitor
Primary
(A) n
Secondary
(B) n+1 n+2 n+3 n n+2 n+4 n+5 n n+3 n+6 n+7 n n+4
Printing an Image
When printing image files, select between [Print Index] and [Print photo].
Print Index : Prints thumbnails and their image data.
Print photo : Prints a high-quality print of an image. You can print multiple images on one page or print one large image on multiple pages using partition printing.
Using Print Index
1
In the Thumbnail pane of the PENTAX PHOTO Browser 3 window, select the images to print.
2
Select [Print] from the [File] menu.
Alternatively, click the icon on the Tool bar.
The [Print] dialog appears.
3
Select the [Print Index] tab.
59
4
Make the layout and caption settings.
Item
Preview
Layout
Number of images per page (W × H)
Caption
Description
This displays a preview using the specified settings.
Select from three layout patterns.
From the list, specifies the number of images to print on one page.
The caption settings are explained below. The contents that appear depend on the selected layout.
Selects the image caption position from the list.
Position
Contents
Font
Specifies the data that may be printed from the list.
Selects a font from the list. The default setting is the standard system font.
Size Selects a font size from the list.
Information labels Sets whether to print information label.
Printer The name of the printer to be used appears here.
• The image size is calculated automatically from the margins, number of images, and caption size.
• Click the [Page Setup] button to make the page settings. (p.62)
• Click the [Printer Settings] button to make the printer settings. (p.63)
60
5
Click [OK].
Printing starts.
Using Print Photo
1
In the Thumbnail pane of the PENTAX PHOTO Browser 3 window, select the images to print.
2
Select [Print] from the [File] menu.
Alternatively, click the icon on the Tool bar.
The [Print] dialog appears.
3
Select the [Print photo] tab.
4
Make the layout and caption settings.
Item
Preview
Layout
Images per page
Multi-page printing
Allocating images
Position
Description
This displays a preview using the specified settings.
Select from three layout patterns.
Layout 1 : Normal printing
Layout 2 : Layout printing
Layout 3 : Partition printing *1
(printing one image on multiple pages)
From the list, selects the number of images to print on one page.
Selects the number of partitions per page from the list.
Selects processing options from the list when printing area and image size differ.
No cropping : The image does not exceed the printing area.
Cropping : The entire printing area is used and any part exceeding the printing area is deleted.
Selects the position of the image in the printing area from the list.
Space (Vertical)/
Space (Horizontal)
Sets the vertical and horizontal space in mm or inches.
Rotate to fit printing area This setting uses the printing area most effectively.
Check this to allow the image to be rotated 90° as needed to fit the printing area and then printed.
Fit to paper Sets the printer to print using the maximum printing area.
This can be set when [Layout 1] (Normal printing) or
[Layout 3] (Partition printing) is selected.
Print Shooting Date and
Time
Sets the Shooting date/time print settings.
Position : Selects position to print Shooting date/ time.
Font : Selects a font from the list. The default setting is the standard system font.
Print Time : Select from No (Default) or Yes
(HH:MM:SS, 24-hour format only).
Separator : Sets dividers in text.
Format
Text color : Sets the font color.
Size
: Sets date format.
: Selects a font size from the list.
Printer The name of the printer to be used appears here.
*1: When [Layout 1] (Normal printing) or [Layout 3] (Partition printing) is selected, the [Fit to paper] checkbox is displayed. Check [Fit to paper] to ignore margin settings and print images to the maximum print area of the printer.
61
62
• The image size is calculated automatically from the margins, spacing, and number of images.
• The printing orientation of the date/time depends on the image data (for
Windows only). The printing position is in a relative position to the image data.
• Click the [Page Setup] button to select the page settings. (p.62)
• Click the [Printer Settings] button to select the printer settings. (p.63)
5
Click [OK].
Printing starts.
Using Page Setup
Use Page Setup to set printing options such as margins, headers/footers, and number of copies.
1
Select [Page Setup] from the [File] menu in the PENTAX
PHOTO Browser 3 window or click [Page Setup] on the
[Print] dialog.
The [Page Setup] dialog appears.
2
Make the settings.
Item
Margins
Number of copies
Header/
Footer
Left, Right,
Upper,
Lower
Header/
Footer
Position
Font
Text
Insert Page
Number
Insert No. of
Pages
Size
Description
The default setting is 25 mm (1 inch) for paper larger than A4, and 10 mm (0.5 inches) for smaller.
The default setting is 15 mm from the top and bottom edges.
Specifies the number of copies to print.
Sets header/footer position. Select from Do Not Print
(Default), Align left, Align center, and Align right.
Selects a font from the list. The default setting is the standard system font.
Enter text to print for the header/footer.
When this is clicked, [# Page number] is inserted at the cursor location in the Text field.
When this is clicked, [# Number of pages] is inserted at the cursor location in the Text field.
Selects a font size from the list. The default setting is
10 point.
3
Click [OK].
The page setup information is set.
63
Using Printer Settings
Check the printer settings and change the settings as needed.
Refer to the printer user’s manual for details on printer settings.
This section describes the printer settings for Windows. For Macintosh, the printer setting screen is dependent on the OS.
64
1
Click [Printer Settings] on the [Print] or [Page Setup] dialog.
The [Print Setup] dialog appears.
2
Make the settings.
Item
Printer
Paper Size
Source
Orientation
Description
Selects the printer to use from the [Name] list.
Click [Network] to select a printer on the network.
Click [Properties] to make advanced printer settings.
Selects paper size.
Selects paper feeding method.
Sets printing direction. Select [Portrait] or [Landscape].
3
Click [OK].
The printer setup information is set.
Changing the PENTAX PHOTO Browser 3
Settings
Here, you can set the PENTAX PHOTO Browser 3 settings, such as the program launch or exit settings, the initial image view size, thumbnail caption viewing, and RAW file view format.
1
Select [Options] from the [Tool] menu in the PENTAX
PHOTO Browser 3 window.
Alternatively, click the icon on the Tool bar.
When the [Options] dialog appears, select the tab with the setting you want to change.
65
66
2
After making your selections, click [OK].
The options are set and the [Options] dialog closes.
Click [Reset] to return all options to default settings.
When [Reset] is clicked, all tab settings including the settings of the currently open tab are returned to default settings.
[Program Launch/Exit] tab settings
Change the following settings for PENTAX PHOTO Browser 3 in the
[Program Launch/Exit] tab.
Item
Folder at Startup
Status at Startup
Show Splash Screen at
Startup
On Exit
Description
From the following, select the folder to open when starting the program.
Last folder used:
This opens the folder that was last used in
PENTAX PHOTO Browser 3.
Desktop: This opens the desktop.
Always use this folder:
Click [Browse] to specify a folder.
Sets PENTAX PHOTO Browser 3 status at startup.
Status at last exit:
When the next session of PENTAX PHOTO
Browser 3 is started, the settings from the previous session are used.
Default : The default screen appears.
Sets splash screen when PENTAX PHOTO Browser 3 starts.
On
Off
: Splash screen is shown.
: Splash screen is not shown.
Sets operation when exiting PENTAX PHOTO
Browser 3.
Exit PENTAX PHOTO Browser only:
Exits PENTAX PHOTO Browser 3 only even if PENTAX PHOTO Laboratory 3 is also open.
Exit PENTAX PHOTO Laboratory at same time:
Exits PENTAX PHOTO Laboratory 3 at the same time as PENTAX PHOTO Browser 3 without displaying a confirmation message.
[Browser] tab settings
Sets the Browser screen display and slideshow settings in the [Browser] tab.
Item Description
Thumbnail Date/time Sets the thumbnail date and time displayed in the
Thumbnail pane and Checked images pane.
Date/time file was last modified:
Displays the date and time the file was last modified
(after the shooting date).
Date Exif information modified (Shooting date):
Displays the date and time the file was created
(shooting date).
Use Image
Orientation
Information
Sets whether to use information indicating image orientation in the image file on the Browser screen and
Main image view window display.
Yes : Uses image orientation information.
No : Does not use image orientation information. When [No] is selected, the thumbnail display does not change even if [Rotate Display (90° Left)] or [Rotate Display
(90° Right)] is selected from [Rotate].
Display Orientation of
Images
Indicate Changes in
Image Data During
Frame Advance
Sets whether to display an icon indicating the image display orientation on the Browser screen and Main image view window.
Yes : Image display orientation is indicated with an icon.
No : Image display orientation is not indicated with an icon.
Sets whether to indicate changes in image data in red from one file to the next during frame advance in the Main image view window.
Yes : Changes in image data from one file to the next are indicated in red.
No : Changes in image data from one file to the next are not indicated in red.
Color Coding of
Checked Image
Thumbnail Border
Sets the color of the thumbnail border in the Checked images pane according to the image file location (path).
Select from seven colors.
Slideshow Settings Sets the pattern when viewing slideshows.
Single window:
View slideshow in a single window.
Dual window:
View slideshow in two windows (primary and secondary).
Single full screen:
View slideshow full-screen on a single monitor.
Dual full screen:
View slideshow full-screen on two monitors.
67
68
Item
Frame Advance
During Dual View
Interval
Loop view
Display Image Data
During Slideshow
Description
Sets the refresh method when viewing two images simultaneously (p.57).
Advance in order:
Frames advance in order. The secondary window shows one image ahead of the primary window.
Advance alternate:
At each frame advance interval, images are shown alternately on the primary and secondary windows.
With the first image starting at zero, even number images are shown on the primary window and odd number images are shown on the secondary window.
Advance two frames:
Frames advance in twos.
Fix image to primary monitor:
The primary window shows a fixed image. The secondary window shows images, which advance in order.
Sets interval for frame advance during slideshow.
Second(s):
Sets interval (in seconds) for frame advance.
Sets the repeat view setting.
No : When all of the images have been shown, the slideshow ends.
Yes : The slideshow repeats until ended.
Sets whether to display image data during slideshow. Also selects information to display.
Yes : Displays image data during slideshow.
No : Does not display image data during slideshow.
[Main Image Window] tab settings
Changes the Main image view window settings in the [Main Image
Window] tab.
Item
Image Data
Pane Height
Description
Sets the height of the Image data pane that appears when the Main image view window opens.
Last size specified:
Sets Image data pane height to be the same as the previous height when the Main image view window opens.
Auto : The height is automatically adjusted.
Fixed: The number of lines can be specified.
Item
Window Size for
Main Image
Display File Path in
Title Bar
Display Number of
Images in Title Bar
Showing Multiple
Images
Main Image View for
RAW File
View Attributes to
Maintain
Description
Sets the window size of the Main image view window.
Last size specified:
Opens the Main image view window to the last window size specified.
Default : Opens the window to the default size.
Set size : Specifies the size of the Main image view window in pixels.
Sets whether to display the file path in the title bar of the
Main image view window.
Yes
No
: Displays the file path in the title bar.
: Does not display the file path in the title bar.
Sets whether to display “Display order/Total number of images” when displaying multiple images in one Main image view window.
Yes
No
: Displays the display order and total number of images in the title bar.
: Does not display the display order and total number of images in the title bar.
When multiple images are selected in the Thumbnail pane, select the viewing method in the Main image view window.
Single window:
Images appear in one Main image view window.
Click the icon on the Main image view window Tool bar to switch the image view.
Separate window:
Images appear in multiple Main image view windows.
Sets view when opening a new RAW file.
Simple display:
The compressed image data in the RAW file appears. The image data appears more quickly, but there is quality loss due to the high compression rate. Therefore, this function is not recommended for checking image details.
Auto RAW display:
The actual RAW file appears. (Full Auto
Processing)
Size (Ratio):
Select the processing ratio for Auto RAW display from [1:4], [1:2], or [Life size]. When emphasizing speed, select [1:4]. When emphasizing quality, select [Life size].
Selects view attributes to maintain during frame advance.
Multiple attributes may be selected.
Zoom : View magnification rate is maintained.
Position : Position is maintained.
Direction : Direction is maintained.
69
70
Item
Synchronous Display
Frame Advance
Description
Sets whether to show all images for each synchronized
Main image view window when advancing frames during synchronous display of multiple Main image view windows.
In order : Shows all images.
Skip : Skips images displayed in other synchronous display windows.
[Other] tab settings
Change the display alert and color management settings in the [Other] tab.
Item
Display Alerts
Working Color
Management
Color Management
During Printing
Units
Description
Sets whether to display alerts.
Yes : Displays alerts. (The “In the future, do not show this message.” check box is not checked for all alerts.)
No : Does not display alerts. (The “In the future, do not show this message” check box is checked for all alerts.)
Sets color management method during image display.
Normal Display:
Displays the image with the color management set for the image.
Disable Color Management:
Color management is disabled.
Simulated wide gamut display:
Expressive range of Adobe RGB is compressed to sRGB expressive range and displayed. As the sRGB gamut is narrower than the Adobe RGB gamut, color reproduction is not completely accurate. However, you can confirm colors in the Adobe RGB gamut that cannot be expressed by the sRGB gamut.
Sets profile to use when printing.
Use printer settings:
Uses printer settings for profile when printing.
Select color profile:
Selects profile to use when printing from the [Profile] drop-down list.
Disable Color Management:
Disables color management and does not use a profile when printing.
mm : Sets units of length displayed in dialogs to millimeters (mm).
in. : Sets units of length displayed in dialogs to inches.
PENTAX PHOTO Laboratory 3
PENTAX PHOTO Laboratory 3 supports a number of image processing functions for use with image files recorded in PENTAX’s exclusive digitalcamera RAW format, including data conversion, color adjustment, and image compensation. The processing of RAW files enables images to be viewed on commercially-available image viewing and editing software.
This section describes opening and closing PENTAX PHOTO Laboratory 3 and viewing the PENTAX PHOTO Laboratory 3 window, and explains its functions.
Opening PENTAX PHOTO Laboratory 3
For Windows
1
Select the start menu on the desktop.
2
Select [All Programs] - [PENTAX
Digital Camera Utility] - [PENTAX
PHOTO Laboratory].
PENTAX PHOTO Laboratory 3 is opened, and the PENTAX PHOTO
Laboratory 3 window appears.
71
Closing PENTAX PHOTO Laboratory 3
Select [Exit] from the [File] menu on the PENTAX PHOTO Laboratory 3 window.
PENTAX PHOTO Laboratory 3 can also be started from within PENTAX
PHOTO Browser 3. (p.27)
72
For Macintosh
1
Double-click the [PENTAX Digital Camera Utility] folder in
[Applications] on the hard disk.
2
Double-click the [PENTAX
PHOTO Laboratory] program icon.
PENTAX PHOTO Laboratory 3 is opened, and the PENTAX PHOTO
Laboratory 3 window appears.
Closing PENTAX PHOTO Laboratory 3
Select [Quit PENTAX PHOTO Laboratory] in [PENTAX PHOTO Laboratory] on the desktop menu bar.
PENTAX PHOTO Laboratory 3 can also be started from within PENTAX
PHOTO Browser 3. (p.27)
About the PENTAX PHOTO Laboratory 3
Window
This section explains the PENTAX PHOTO Laboratory 3 window layout, names, and functions.
PENTAX PHOTO Laboratory 3 is made up of seven panels.
The control panels are independent and can be repositioned anywhere on the screen. Select [Arrange Windows] from the [View] menu to align the panels.
Six panels, not including the Main panel, can be hidden or shown.
Preview panel
Tone panel
Main panel
Menu bar Tool bar
73
White balance panel
Other settings panel
Noise reduction panel
Lens aberration correction panel
• When the processing mode is set to (Full Auto Processing), the White
Balance panel, Tone panel, Other Settings panel, Noise Reduction panel, and Lens aberration correction panel are not displayed (p.77). In addition, the
and buttons in the Preview panel are not available.
• When a RAW file is not selected, the preview image does not appear. (p.78)
74
Main panel
This executes functions or sets various settings of PENTAX PHOTO
Laboratory 3.
For Macintosh, the Main panel only contains the Tool bar. The Menu bar appears at the top of the desktop.
Preview panel
You can preview adjustments made for a selected RAW file in the panels.
You can also enlarge part of the RAW file.
View adjustments in real time or by clicking the [Refresh] button. (p.78)
White balance panel
Selects white balance or sets color temperature. Adjust the image color tone, such as when the image appears bluish or yellowish. (p.85)
Tone panel
Displays tone curve and histogram information of displayed image. (p.86)
Adjusts the image tone using the tone curve.
Other settings panel
Adjusts characteristics such as sensitivity, contrast, color depth, and edges. (p.87)
Noise reduction panel
Removes and reduces random noise and spurious color signals peculiar to digital cameras (color moire). (p.87)
Lens aberration correction panel
Corrects marginal lumination, distortion and lateral chromatic aberration due to lens aberration. (p.88)
Menu bar
This executes functions or sets various settings of PENTAX PHOTO
Laboratory 3.
[File] menu
Open This selects the image file for processing in PENTAX
PHOTO Laboratory 3. Only applies when the software is started as standalone. This cannot be used when PENTAX PHOTO Laboratory 3 is started within the PENTAX PHOTO Browser 3 window.
(p.80)
[File] menu
Save
Recall Adjustment
Save Adjustment
Exit
This performs RAW file data processing and saves it with the specified format. The available save formats are JPEG (5 compression rates), TIFF-8, and TIFF-
16. Use [Save Mode] on the [Tool] menu to specify the save format. (p.89)
Use this function to load previously saved settings for the various panels. (p.91)
Use this function to save the settings currently used in the various panels. (p.90)
The [Print] dialog appears with various print settings.
This closes PENTAX PHOTO Laboratory 3.
(For Macintosh, select [Quit PENTAX PHOTO
Laboratory] on the [PENTAX PHOTO Laboratory] menu.)
[View] menu
Full Auto Processing
Custom Processing
First Image
Previous Image
Next Image
Last Image
Each RAW file is processed according to the settings applied with shooting. All panels, except the Preview panel, are hidden. (p.83)
This performs processing using the processing condition settings specified by the user. The processing conditions are set using the White balance panel, Tone panel, Other settings panel, Lens aberration correction panel, and Noise Reduction panel. (p.84)
When multiple images are selected, the preview of the first image in order of registration appears.
When multiple images are selected, the preview of one image ahead in order of registration appears.
When multiple images are selected, the preview of one image back in order of registration appears.
When multiple images are selected, the preview of the last image in order of registration appears.
Refresh Preview
Preview
White Balance
Tone
Other Settings
Noise Reduction
When real-time preview is not enabled, the preview is refreshed using the current settings.
This shows or hides the Preview panel.
This shows or hides the White balance panel.
This shows or hides the Tone panel.
This shows or hides the Other settings panel.
This shows or hides the Noise reduction panel.
Lens aberration correction This shows or hides the Lens aberration correction panel.
Arrange Windows This arranges the displayed panels.
75
76
[Tool] menu
Undo
Redo
Image Tone
Save Mode
Rotate
Crop/Resize
Options
When in Custom Processing mode, use this function to cancel the previous operation. You can undo up to five operations.
When in Custom Processing mode, use this function to redo an operation that was cancelled with the
[Undo] button.
Select a type of photofinishing. In Custom Processing mode, the [Natural] and [Bright] options are available.
This function is not available in Full Auto Processing mode or when working with RAW images captured with the w.
This sets the quality when saving processed images.
Save images in JPEG format with one of five different compression rates or in TIFF format with one of two bit types. The default setting is JPEG (Highest
Quality).
Rotates the Preview panel view 90° left or right. The rotated image is saved without changing the RAW file.
The dialog for cropping and resizing the image appears.
This sets various settings for PENTAX PHOTO
Laboratory 3. (p.98)
[Help] menu
Help Topics
Index
What’s This?
About PENTAX PHOTO
Laboratory
This shows PENTAX PHOTO Laboratory 3 help contents. (For Macintosh, select [PENTAX PHOTO
Laboratory Help].)
This shows PENTAX PHOTO Laboratory 3 help index search. (This command is not available for
Macintosh.)
This shows pop-up tips.
This shows PENTAX PHOTO Laboratory 3 version information. (For Macintosh, select [About PENTAX
PHOTO Laboratory] on the [PENTAX PHOTO
Laboratory] menu.)
Tool Bar
This executes functions or sets various settings of PENTAX PHOTO
Laboratory 3.
1 2 3 4 5 6 7 8 9 10 11 12
77
Number Icon (button)
1
2
3
4
Open
Content
This selects the image file for processing in
PENTAX PHOTO Laboratory 3. Only applies when the software is started as standalone. This cannot be used when PENTAX PHOTO
Laboratory 3 is started within the PENTAX
PHOTO Browser 3 window. (p.80)
This performs RAW file processing and saves it with the specified save mode and image size.
(p.89)
Save
Full Auto Processing
Custom Processing
This appears when Full Auto Processing is set.
Performs processing using the processing conditions set in the RAW file.
Click to select or from the pull-down menu.
This is displayed when Custom Processing is set.
This performs processing using the processing condition settings specified by the user. The processing conditions are set using the White balance panel, Tone panel, Other settings panel,
Lens aberration correction panel and Noise
Reduction panel. (p.84)
When in Custom Processing mode, this recalls a saved adjustment file. (p.91)
Recall Adjustment
5
Save Adjustment
This saves the processing conditions set in
Custom Processing mode as an adjustment file.
(p.90)
6
Undo
When in Custom Processing mode, use this function to cancel the previous operation. You can undo up to five operations.
78
Number Icon (button)
7
8
9
10
11
12
Redo
Image Tone
Save Mode
Rotate
Options
Content
When in Custom Processing mode, use this function to redo an operation that was cancelled with the [Undo] button.
This displays the current Image tone. You can choose [Natural] or [Bright] by clicking in
Custom Processing mode. This function is not available in Full Auto Processing mode or when working with RAW images captured with the w . (p.83)
This displays the current Save mode. Click to select the save format for the processed image file. (p.89)
This rotates the Preview panel view 90° left or right. RAW files are processed according to the selected direction.
This is used to change the PENTAX PHOTO
Laboratory 3 settings. (p.98)
This shows PENTAX PHOTO Laboratory 3 help contents.
Help Topics
Preview Panel
This shows a preview of the RAW file.
1
2
3
4
5 6 7 8 9
Number Icon (button)
1
Rotate/Shift
2
Crop/Resize
3
Enlarge Area
4
Refresh
5
6
7
8
9
First Image
Previous Image
Next Image
Content
Rotates the image based on the baseline or shifts it in a vertical or horizontal direction.
79
Crops portions of an image and changes the image output size.
When this is turned on, a red frame appears in the preview area. The Enlarge area window appears and the magnification can be selected.
Click this to refresh the preview using the current settings when [Refresh Preview] becomes the
[Refresh] button on the Options settings of
PENTAX PHOTO Laboratory 3.
Shows the file name of the image currently displayed in the Preview panel. When multiple images are selected, select the image to display from the list.
When multiple images are selected, the preview of the first image in order of registration appears.
When multiple images are selected, the preview of one image ahead in order of registration appears.
When multiple images are selected, the preview of one image back in order of registration appears.
When multiple images are selected, the preview of the last image in order of registration appears.
Last Image
80
Selecting a RAW File to Process
1
Select a RAW file in the PENTAX PHOTO Browser 3 window.
2
Select [PENTAX PHOTO Laboratory] on the [Tool] menu of
PENTAX PHOTO Browser 3 or click the icon.
A RAW file appears in the Preview panel of the PENTAX PHOTO
Laboratory 3 window.
Select multiple image files to open multiple images at the same time.
Click the , , , or button on the Tool bar to preview the desired image.
• To select multiple image files, hold down the Ctrl key and click on thumbnail images in the Thumbnail pane or the Checked images pane (For Macintosh, hold down the command key and click on image files). Selected thumbnail images are indicated by a blue border.
• When PENTAX PHOTO Laboratory 3 is launched with the Checked images pane selected but no thumbnails in the active group specified (none of the thumbnails are displayed with a blue border), all RAW images in the active group will be opened in PENTAX PHOTO Laboratory 3.
Opening a RAW File in PENTAX PHOTO Laboratory 3
1
Click the icon in the PENTAX PHOTO Laboratory 3 window.
The [Open] dialog appears.
81
2
Specify the file name of a RAW file to display and click the
[Open] button.
A RAW file appears in the Preview panel of the PENTAX PHOTO
Laboratory 3 window.
Rotate/Shift Settings
1
Click the icon in the PENTAX PHOTO Laboratory 3 window.
The Rotate/Shift panel appears.
2
Check the [Apply] check box and adjust the parameters to rotate or shift the image.
When [Real time] is selected for [Refresh Preview] in the [Options] dialog, the changes to the parameters are immediately applied to the preview. When [Refresh button] is selected for [Refresh Preview], click the [Refresh] button on the Preview panel or select [Refresh Preview] on the [View] menu.
82
Item
Rotate
Shift
Description
Degrees
Baseline
: Adjusts the angle of rotation.
: Rotates the image until the line on the preview image is vertical or horizontal.
Vertical shift
Horizontal shift
: Shifts the image vertically.
: Shifts the image horizontally.
Lens angle of view : Necessary information for shifting the image. This is accurately set based on the image file information by default; however, this can be changed to alter the vertical-horizontal shift ratio.
Crop/Resize Settings
1
Select [Crop/Resize] from the [Tool] menu.
Alternatively, click the icon on the Preview panel.
2
Set the cropping area and image output size on the Crop/
Resize panel.
Click [Reset] to return the set values to their initial settings.
Item
Cropping Aspect
Ratio
Cropping Area
Description
Maintain original aspect ratio:
Maintains aspect ratio of original image.
Specify paper size:
Uses paper size setting.
Specify aspect ratio:
Specifies desired aspect ratio.
Do not specify aspect ratio:
Does not set condition for aspect ratio of cropping area.
Center : Centers cropping area in middle of original image.
Top Left : Sets cropping area based on top left coordinates.
Bottom Right:
Sets cropping area based on bottom right coordinates.
Top left coordinates:
Sets top left coordinates of cropping area.
Cropping size:
Sets size of cropping area.
Bottom right coordinates:
Sets bottom right coordinates of cropping area.
Original size:
Displays number of pixels of original image.
Item
Image Size
Description
Do not resize:
Select this to not change the image output size.
Specify image size:
Select this to specify the number of pixels (by width and height) for the image output size. Enter the number of horizontal and vertical pixels in [W] and
[H] for [Specify image size] on the right side.
Specify resolution:
Select this to specify the resolution (in dpi) for the image output size. Enter the resolution (dpi) and horizontal and vertical size (in mm or inches) in
[Specify resolution] on the right side of [Specify image size]. When [Specify paper size] is specified in [Cropping Aspect Ratio] for [Crop/Resize], select the paper size specified as the output size.
3
Click [OK].
The image is cropped.
The cropping area remains on the image in the preview panel, and the
icon is selected. After the image is processed, the cropping area is saved with the specified pixels.
To cancel cropping, click the icon again to undo the cropping area.
83
Easily Modifying RAW Files
In Custom Processing mode, simple image processing suited to your shooting intent is possible with selection of an Image tone with PENTAX
PHOTO Laboratory 3.
Select from the following two Image tones when using J,
L , U, F, q, r:
Natural Elaborates images with natural colors.
Bright Elaborates sharp, bright images.
When in Full Auto Processing mode, RAW files are processed using the Image tone selected at the time of shooting. This setting cannot be changed in
PENTAX PHOTO Laboratory 3.
84
Setting RAW File Processing Conditions
Set individual processing conditions to create unique image modifications.
1
Select [Custom Processing] from the [View] menu, or click
on the icon on the Tool bar and then click
(Custom Processing) on the drop-down list.
The Main panel, Preview panel, White balance panel, Tone panel, Other settings panel, Lens aberration correction panel, and Noise Reduction panel appear.
• To close the White balance panel, Tone panel, Other settings panel, Lens aberration correction panel, or Noise Reduction panel, select [Full Auto
Processing] from the [View] menu, or click on the icon on the Tool bar and then click (Full Auto Processing) on the drop-down list. The image is processed using the Image tone set at the time of shooting, and the settings cannot be changed in PENTAX PHOTO Laboratory 3.
• When multiple RAW files are selected, the same processing conditions are applied to all selected files. Use the Queue list to set different processing conditions for each file and to process all the files at once. (p.90, p.101)
2
Enter settings in each setting panel.
The settings are reflected in the Preview panel. Settings can be applied in one of two methods, determined by the setting in the [Options] dialog. (p.98)
• Reflect the settings immediately in real time.
• Reflect the settings when clicking the icon on the Preview panel.
Setting the White balance
85
Item
White
Balance
Settings
Color
Temperature
Description
Select from the following:
Camera setting:
Apply the white balance setting used on your camera.
Override:
Select the white balance to apply from [Daylight], [Shade], [Cloudy],
[Daylight fluorescent], [Neutral white fluorescent], [Cool white fluorescent], [Tungsten lamp], or [Flash].
Gray point setting:
Select the point in the preview image to turn gray. Specify using the pointer for the most appropriate white balance setting. Select from [1 point], [3 points], or [5 points]. When shooting a gray card to set the Gray point setting, a more accurate white balance may be achieved. Click [Reset] to delete the selected gray points.
Set color temperature:
The white balance is set according to the color temperature setting.
This can be set when selecting [Set color temperature] with
[Override] from [White Balance Settings].
Color Temperature:
Slide the bar to set the color temperature or select the value from the list. Select from between 2500K to 10000K (in Kelvin).
Fine tune:
Use the two slide bars to correct unwanted color casting (color balance) of Amber, Blue, Magenta, and Green in captured images. Fine tune is not reflected in the color temperature display.
86
Setting the Tone curve/Histogram
Item
Tone curve
Histogram
Description
Adjusts the tone curve to make precise adjustments to the density and contrast. Change the tone curve using the pointer. Move the curve up to brighten and move the curve down to darken the image.
Click a point on the tone curve to fix the curve at that point. A black dot appears. The black dot may be dragged and moved. Right-click to erase the black dot. (For
Macintosh, hold down the control key while you click the black dot.)
Brightness shows the distribution of luminosity when combining RGB, R (Red), G (Green) and B (Blue).
Show Bright Portions/
Show Dark Portions
When all [Show Bright Portions] check boxes are selected, the bright portions of the image are shown in flashing gray.
When all [Show Dark Portions] check boxes are selected, the dark portions of the image are shown in flashing white.
You can check bright portions with the flashing complementary color for each color, and the dark portions with the flashing of each color.
Reset Deletes the tone curve settings, and returns to a straight line.
Highlight Adjustment Adjusts the coloring of highlight areas. Place priority either on color or brightness and on saturation or hue, and use the [Highlight compensation] slider to compensate for bright portions.
Setting the Sensitivity/Contrast/Saturation/Sharpness
Set these using the Other settings panel.
87
Item
Sensitivity
Contrast
Saturation
Sharpness
Description
Ajusts the sensitivity.
+ : The image becomes brighter.
– : The image becomes darker.
Adjusts the contrast between light and shadow.
+ : Increases contrast between light and shadow.
– : Decreases contrast between light and shadow.
Adjusts the strength of the colors.
+ : The colors become stronger.
– : The colors become weaker.
Adjusts the sharpness of the edges.
+ : Image contour is enhanced.
– : Image contour is softened.
Setting the Noise Reduction
Set using the Noise reduction panel.
Item
Random noise reduction
Spurious color signal reduction
Description
Reduces random noise (especially electrical noise visible in dark areas).
Each pixel in a single-chip image sensor, such as a CCD or
CMOS, represents red, green or blue, and when photographing a subject adjacent to clear lines or fine patterns, these pixels may appear to generate colors not in the original image
(spurious color signals). This function reduces spurious color signals.
88
Setting the Lens Aberration Correction
Set using the Lens aberration correction panel.
[Marginal lumination compensation] tab
Adjusts marginal lumination of the image.
Item
Lens angle of view
Compensation
Description
Sets the viewing angle of the lens used when shooting.
Slide to the left to make the marginal lumination linear at the center portion of the lens, and slide to the right to correct the outer portions of the lens.
The slider sets the compensation level. Set the compensation level between –50 and +120. Slide towards – for darker and + for brighter compensation.
[Distortion Correction] tab
Corrects distortions (lens aberration that photographs straight lines as curved lines).
Item
Correction balance
Compensation
Description
The slider adjusts the distortion correction level between the center and margins of the image. (Slide to the right to widen the range.)
The slider sets the compensation level.
[Lateral Chromatic Aberration Correction] tab
Corrects lateral chromatic aberration in which there is a difference in the image magnification and image size due to different color wavelengths at the image margins.
Item
Red compensation
Blue compensation
Description
The slider adjusts the magnification of red light.
The slider adjusts the magnification of blue light.
Saving Image Files
You can save the image files which have been Full Auto processed or
Custom processed. Specify the save format and image size when saving image files. Save images in JPEG format with one of five different compression rates, or in TIFF-8 or TIFF-16 format.
As the compression rate increases, the file size decreases, but the quality also deteriorates.
1
Select [Save Mode] from the [Tool] menu, or click on the right of the icon to select the save format.
Select the quality and file format when saving RAW files.
For JPEG files, image data is compressed and saved. Select from
Highest Compression, High Compression, Medium Quality, High Quality, and Highest Quality. Select High or Highest Compression to make the file size smaller by lowering quality. Select High or Highest Quality to maintain high quality by keeping the file size large.
Select TIFF-8 or TIFF-16 to avoid quality loss due to compression.
Although selecting TIFF-16 leads to a larger file size, quality loss is minimized when modifying the file with other image editing software.
89
90
2
Select [Save] from the [File] menu or click the icon on the Tool bar.
The [Save] dialog appears.
When multiple images are selected, the [Save] dialog is not displayed. The images will be saved, with their original file names, to the [Folder to Use] specified in
[Options] (p.98) (file extensions will be modified automatically according to the specified file format).
3
Specify the file name and save destination, and then click
[Save].
The image file is saved.
When [Use queue list] is set in [Options], adjustment is added as a job to the [Image
Processing Queue List] dialog for batch processing to be performed later. (p.101)
Saving Image File Adjustment
All current adjustment combinations can be saved as a parameter file.
Saved adjustment can then be applied to other RAW files for processing.
1
Click [Save Adjustment] from the [File] menu on the Main panel or click the icon.
The [Save Adjustments] dialog appears.
2
Specify the file name and save destination, and then click
[Save].
The current settings are saved as an adjustment setting file (*.ini).
Recalling Image File Adjustment
1
Display a RAW file in the Preview panel.
2
Click [Recall Adjustment] from the [File] menu on the Main panel or click the icon.
The [Open Adjustment File] dialog appears.
3
Select a folder and parameter file name, and then click
[Open].
The settings saved in the parameter file are reflected in the parameters of the RAW file.
91
92
Printing
You can print the currently displayed RAW file. Print image files using
[Print Bracketing] or [Enlarge image].
[Print] dialog
Set the print layout, captions, and other settings in the [Print] dialog.
Using the [Print] dialog
Select [Print] on the [File] menu to open the [Print] dialog.
[Print] dialog settings
The [Print Bracketing] and [Enlarge image] setting tabs appear in the
[Print] dialog.
[Print Bracketing] tab
Print bracketing is a function that prints an image several times on one page with automatically adjusted parameters within a set parameter range, enabling you to view the printed results of different parameters at the same time. Printing the image on your printer with this function is useful for determining the optimal parameters for that image.
93
Display Mode
Sets preview method.
Item
Segment selection
Print preview
Description
Switches to window for selecting image area for print bracketing.
A preview of the print layout is displayed.
94
Print Layout
Sets print bracketing settings.
Item
Segment
Specification
Segmentation
Segments
Bracketing 1
Description
Selects image area setting method for print bracketing.
Select from the following three settings.
Segment original image:
Divides entire image into equal sections and allocates bracketing variations for each section.
This is useful for reviewing the changes in set parameters while previewing the entire image.
Repeat segment:
Cuts part of image and prints several repeating tiles with different bracketing parameters. This is useful for reviewing the optimal settings for the most important area in the image. When this setting is selected (and [Segment selection] is selected for [Display Mode]), you can select the area repeatedly printed in the preview.
Repeat small original:
Reduces entire image size and prints several repeating tiles with different bracketing parameters. This is useful for verifying the effects of varying parameters on the entire image.
Sets segmentation method of print area. Select from the following three settings.
Segment vertically:
Divides area vertically. Only one bracketing parameter can be changed.
1 block : Divides area into multiple horizontal and vertical sections. Two bracketing parameters can be changed.
3 blocks : Divides area into multiple horizontal and vertical sections fixed at three vertical positions. One bracketing parameter can be changed, but prints three areas of image.
Sets number of horizontal and vertical divisions. Selectable value depends on selected segmentation method.
Selects bracketing parameter to be changed horizontally.
Choose from six parameters: Sensitivity, Contrast,
Saturation, Sharpness, Fine tune A-B and Fine tune M-G.
(The same parameter cannot be selected for Bracketing 1 and Bracketing 2.)
Item Description
Bracketing 1 steps Selects variable step of bracketing parameter to be changed horizontally. The range of the variable step depends on the selected bracketing parameter.
Bracketing 2 Selects bracketing parameter to be changed vertically. The parameters that can be selected are the same as those for
Bracketing 1. (The same parameter cannot be selected for
Bracketing 1 and Bracketing 2.)
Bracketing 2 steps Selects variable step of bracketing parameter to be changed vertically. The range of the variable step depends on the selected bracketing parameter.
[Enlarge image] tab
Enlarge image refers to printing the entire image with the current settings.
After reviewing the parameters with print bracketing, use this tab to make the settings for the actual print.
95
Display Mode
Sets preview method.
Item
Entire image
Print preview
Description
Displays entire area of image to be printed and overlaps paper area and print area.
Displays only area of image to be printed.
96
Page Setup
Sets the paper size, margins and other settings.
Item
Print Area
Layout
Description
Sets the paper size and margins.
Standard size : Sets the paper size (Photo (89 × 127 mm)/
(3.5 × 5 in.), Postcard (102 × 152 mm)/(4 × 6 in.), Photo (127 × 178 mm)/(5 × 7 in.), Photo
(203 × 254 mm)/(8 × 10 in.), Photo (254 × 305 mm)/(10 × 12 in.)). The image size for printing is automatically adjusted according to the selected paper size.
Scale to fit : Sets paper size according to paper used by printer. [Margins (mm)/(in.)] can be set. The image size for printing is automatically adjusted according to the selected paper size and margins. Alternatively, select [Fit to paper] to ignore the [Margins (mm)/(in.)] settings and adjust the image size for printing to the maximum print area of the printer.
Margins (mm)/(in.):
Sets top, bottom, left and right margins in units of mm or inches when [Scale to fit] is selected.
Sets segmentation method of print area. Select from the following two settings.
No cropping : Prints entire image. Margins are added to sides or top and bottom depending on print area and aspect ratio.
Cropping : Prints image without margins. Sides or top and bottom of image may be cut depending on print area and aspect ratio.
[Print Setup] dialog
Verify printer settings when necessary using the [Print Setup] dialog. Refer to the printer user’s manual for details on printer settings.
Using the [Print Setup] dialog
Follow the steps below to open the [Print Setup] dialog.
Click [Printer Settings] on the [Print] dialog.
97
The [Print Setup] dialog appears.
98
Settings in [Print Setup] dialog
The following settings appear in the [Print Setup] dialog.
Item
Name
Paper
Orientation
Description
Click [Properties] for printer settings.
Size : Selects paper size.
Source : Selects paper feeding method.
Sets printing direction to portrait or landscape orientation. Select [Portrait] or [Landscape].
Changing the PENTAX PHOTO Laboratory 3
Settings
1
Select [Options] from the [Tool] menu on the Main panel or click the icon on the Tool bar.
The [Options] dialog appears.
2
Click the [General] tab.
Change the settings as needed.
Item
Folder to Use
Description
Select from one of two folders to use.
Folder with original file:
The folder with the RAW file is used.
Always use this folder:
Click [Browse] to display the [Browse for
Folder] dialog, and then select the folder to use.
Item
Status at Startup
Show Splash Screen at Startup
Arrange Panels
Initialize Parameters when Creating a New
File
Display Alerts
Description
Select the status at startup.
Status at last exit:
Maintains the settings last used when the application was closed. This switches to
[Arrange All] when, for example, the settings last used cannot be restored due to a difference in the number or type of monitors.
Arrange All:
All panels to be used are arranged. Display size is set to Small (default setting), and other settings are displayed with the status at last exit.
Default : The status for each panel is returned to the default status.
Sets splash screen when PENTAX PHOTO Laboratory 3 starts.
On
Off
: Splash screen is shown.
: Splash screen is not shown.
Specify the positioning of panels with automatic arrangement.
Align right:
Panels are aligned along the right side.
Align left:Panels are aligned along the left side.
Put in Secondary Monitor Except Preview:
The White Balance panel, Tone panel, Other
Settings panel, Lens aberration correction panel, and Noise Reduction panel are aligned in a secondary monitor while only the Preview panel is displayed in the primary monitor.
In PENTAX PHOTO Laboratory 3, sets whether to initialize all Custom Processing parameters when opening a new image file.
Yes : Resets parameters.
No : Does not reset parameters.
Sets whether to display alerts.
Yes : Displays alerts. (The “In the future, do not show this message” check box is not checked for all alerts.) To change the display setting for individual alerts, set this to [Yes] and then check the “In the future, do not show this message” check box for the alerts you do not want to show.
No : Does not display alerts. (The “In the future, do not show this message” check box is checked for all alerts.)
99
100
3
Click the [Advanced] tab.
Change the settings as needed.
Item Description
Working Color Space In PENTAX PHOTO Laboratory 3, sets working
(preview) color space (color management). Select from the following settings.
Normal Display : Displays the image with the color management set for the image.
Simulated wide gamut display:
Select this option to preview tonal expression, available only with the
Adobe RGB gamut, in an sRGB environment. The expressive range of
AdobeRGB, which has a wider color range than that of sRGB, is compressed to an sRGB area, which has a narrower color range than that of AdobeRGB, and is displayed with lower overall saturation.
Color Space Sets the color space used when processing an image with PENTAX PHOTO Laboratory 3.
RAW file setting : Images are processed with the color sRGB
AdobeRGB management set for the image.
: Processes the image using sRGB.
: Processes the image using
AdobeRGB.
When viewing images processed with AdobeRGB in an sRGB environment, the saturation may appear lower than when processed with sRGB.
Item
Processing
Refresh Preview
Saving Multiple Files
Units
Description
Select from starting processing jobs immediately or creating a queue list and starting jobs later.
Start immediately: Jobs are started immediately. Other operations cannot be performed until processing is completed.
Use queue list : Jobs are added to a queue list. Jobs may be added or deleted before or during processing.
Real time : Set this to apply processing conditions to the preview image upon each change made to [Custom
Processing] settings.
Refresh button: Set this to apply processing conditions to the preview image after all changes are made to [Custom
Processing] settings, upon clicking the [Refresh] button.
Select the saving method when processing multiple images, from the following choices: [Original file name
+ new extension], [Numbered files] and [Save one at a time].
Select [Numbered files] to specify the base file name and the number of following digits.
mm in.
: Sets units of length displayed in dialogs to millimeters (mm).
: Sets units of length displayed in dialogs to inches.
4
After setting each item, click [OK].
The options are set, and the dialog closes.
Click [Reset] to return all options to default settings.
When [Reset] is clicked, all tab settings including the settings of the currently open tab are returned to default settings.
101
102
Glossary
AdobeRGB
This color space is recommended for commercial printing and document creation by Adobe Systems (US). Its color reproduction range is larger than sRGB and adequately covers the color reproduction range for printing. Therefore, color data only reproducible on a printer are not lost when editing on a computer. Note that using AdobeRGB with unsupported software causes colors to appear faint.
CCD RAW file
CCD stands for Charge Coupled Device, a semiconductor device that converts optical information into electrical signals. RAW image data is raw data recorded from CCD output. This data can be transferred to a computer, and manipulated into image data with unique settings such as
JPEG and TIFF using supplied software.
CSV format
This data format lists recording fields and separates them with a comma
(,). Generally, character strings are indicated with double quotation marks in CSV format. Some software include data input and output functions in
CSV format as part of a multipurpose format.
DNG RAW File
DNG (Digital Negative) RAW is a general-purpose RAW file format designed by Adobe Systems. When images captured in proprietary RAW formats are converted to DNG format, support and compatibility for the images increase significantly.
Exif-JPEG format
Exif stands for Exchangeable Image File Format. This image file format is based on the JPEG image data format, and allows thumbnail images and image properties to be embedded into the data. Software that does not support this format processes the image as a regular JPEG image.
Exif-TIFF format
Exif stands for Exchangeable Image File Format. This image file format is based on the TIFF image data format, and allows thumbnail images and image properties to be embedded into the data. Software that does not support this format processes the image as a regular TIFF image.
JPEG
An image compression format. Although the image quality deteriorates a little, images can be compressed to a smaller file size than with TIFF and other formats.
Lossless rotation
Because JPEG uses irreversible compression (data is lost during compression), the quality of JPEG images deteriorates when uncompressed, rotated and then saved. Lossless rotation, however, can be used to rotate
JPEG images without recompressing the data. Exif and other data are maintained. Images for which lossless rotation is performed are processed as separate files; the rotated image appears after the image file is saved.
PNG format
Images saved using this format can be compressed to a small file size, but the reversible compression of this format makes the file size larger than
JPEG. This format is for use with full-color images and prevents quality loss even when re-edited. PNG files, however, cannot be viewed on older browsers (Internet Explorer 3.0 or earlier or Internet Explorer 4.5 on
Macintosh). In addition, thumbnail images and image properties cannot be embedded in the data.
Spurious Color Signal
Occurring in the vicinity of clearly defined lines or fine patterns, this signal results in the appearance of colors that are not a part of the original subject or scene. This phenomenon occurs because each individual pixel on single-plate image sensors (CCD, CMOS, etc.) is capable of reproducing just one color (Red, Green, or Blue).
sRGB (standard RGB)
An international color space standard defined by IEC (International
Electrotechnical Commission). This is defined from color space for computer monitors and is also used as the standard color space for Exif.
TIFF-8
A file format for saving image data. Each image is recorded with 8-bit RGB data for each color. The image is not compressed leaving the file size large, but no deterioration of image quality occurs.
TIFF-16
Although TIFF images are usually 8-bit, this is a 16-bit TIFF. More computations are required when image processing as the dynamic range is larger.
103
Memo
Memo
PENTAX Corporation 2-36-9, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.co.jp/english)
PENTAX Europe GmbH
(European Headquarters)
Julius-Vosseler-Strasse, 104, 22527 Hamburg, GERMANY
(HQ - http://www.pentaxeurope.com)
(Germany - http://www.pentax.de)
Hotline: 0180 5 736829 / 0180 5 PENTAX
PENTAX U.K. Limited
Austria Hotline: 0820 820 255 (http://www.pentax.at)
PENTAX House,
Heron Drive, Langley, Slough, Berks SL3 8PN, U.K.
(http://www.pentax.co.uk) Hotline: 0870 736 8299
PENTAX France S.A.S.
112 Quai de Bezons - BP 204, 95106 Argenteuil Cedex,
FRANCE
(http://www.pentax.fr)
Hotline: 0826 103 163 (0,15€ la minute)
Fax: 01 30 25 75 76
Email: http://www.pentax.fr/_fr/photo/contact.php?photo&contact
PENTAX (Schweiz) AG Widenholzstrasse 1 Postfach 367 8305 Dietlikon,
SWITZERLAND
(http://www.pentax.ch)
PENTAX Scandinavia AB P.O. Box 650, 75127 Uppsala, SWEDEN
(http://www.pentax.se)
PENTAX Imaging Company
A Division of PENTAX of America, Inc.
(Headquarters)
600 12th Street, Suite 300 Golden, Colorado 80401, U.S.A.
(PENTAX Service Department)
12000 Zuni Street, Suite 100B
Westminster, Colorado 80234, U.S.A.
(http://www.pentaximaging.com)
PENTAX Canada Inc.
1770 Argentia Road Mississauga, Ontario L5N 3S7, CANADA
(http://www.pentax.ca)
Specifications and external dimensions are subject to change without notice.
AP012901/ENG Copyright © PENTAX Corporation 2006
FOM 01.0
8.2006 Printed in Europe
ดาวน์โหลด
ลิงก์สาธารณะได้รับการอัปเดตแล้ว
ลิงก์สาธารณะไปยังแชทของคุณได้รับการอัปเดตแล้ว You may view and manage your chat links after registration here.
ลิงก์สาธารณะของเอกสาร
โฆษณา