advertisement
▼
Scroll to page 2
of
42
User's User's Guide Guide 1. Model MODEL Specification Specification Description KT-17LZ21 LG BRAND Part No. SUFFIX 2. N-EU (0407-REV00) KT-17LZ21 Product Name Printing Specification 1. Trim Size 2. (Format) Cover : 1 COLOR ? Inside : 1 COLOR 3. Stock Cover : ? Inside : 6. x 260 mm (BLACK) (BLACK) (Paper) ? 5. 185mm Printing Colors ? 4. : Uncoated paper 80 Uncoated paper 80 g/ g/ Printing Method : Bindery : Saddle stitch Language : English (1) 7. Number of pages :40 pages 3. Instructions Special (1) Origin Notification 4. * LGEDI * LGEWA : Printed in U.K. * LGESP : Printed in Brazil * LGEMX : Printed in Mexico * LGENT : Printed in China * LGEIL Printed in India Printed in Indonesia : : Changes 6 5 4 3 2 1 REV. NO. MM/DD/YY CHANGE NO. 3828TUL287B CHANGE CONTENTS Pagination Front 3828TUL287B sheet 40pages cover Rear cover LG Check list (EN) En P/NO .... 23 .... 38 39 Digital LCD Combi TV OWNER'S MANUAL Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back mation to your dealer when you Model number : Serial number : P/NO : 3828TUL287B Printed in Korea cover require (0407-REV00) and quote this infor- service. Contents Installation 3 Location and function of controls 4 Remote control handset Battery installation / Top/Back/Side Basic panel 8 operation On and off / Programme selection Volume adjustment / Quick view Mute function / Auto Demonstration TV Swivel function / On screen language selection On (option) 9 screen menus Menu selection up TV stations Auto programme tuning / Manual programme tuning Fine Tuning / Programme edit Favourite programme / Calling the programme table Setting Picture 10 15 adjustment PSM (Picture Status Memory) Picture adjustment / DRP (Digital Reality Picture) CSM (Colour Status Memory) / Picture format Sound adjustment SSM (Sound Status Memory) Sound adjustment / Stereo/Dual reception NICAM reception (option) / Sound output selection 17 Other functions 19 TV, AV, DVD and PC modes Child lock / Auto sleep / Sleep timer PIP operation (option) On and off / Input mode selection for sub picture Swapping between main and sub pictures Programme selection for sub picture Sub picture size / Sub picture freeze (option) Sub picture position change / Programme scan (option) 21 Teletext 23 (option) Switch on/off / SIMPLE text / TOP text FASTEXT / Special teletext functions Connection of external (option) equipment 26 Aerial socket / DVD in sockets / DTV in sockets Audio/Video in sockets S-Video/Audio in sockets (S-Video) (option) Headphone socket Connection of PC PC in socket (D-Sub Menu selection / PC 28 jack) Setup DVD Operation Notes on discs / Playing a disc / Playing MP3 discs Playing JPEG file / Selecting disc menu Selecting title menu / Repeat playback A-B repeat playback / Programme playback Selecting the camera angle / 3D sound Picture size zoom / Selecting a audio language Selecting a subtitle language Disc menu language selection Parental control setting / To change password TV Screen / Disc OSD language selection (option) Selecting digital audio output DRC (Dynamic Range Compression) Troubleshooting 2 check list 31 Installation Power This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs. a. Open the back panel cover. b. After connecting the power cord to the set, connect the power cord to an AC mains. c. Close the back panel cover. Warning a c b To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently. Service Never remove the back cover of the set as this can expose you to the set does not operate proper- high voltage and other hazards. If ly, unplug it and call your dealer. Aerial Connect the aerial cable to the socket marked +75 Ω on the back. For the best reception an outdoor aerial should be used. Location Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the set is placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover. This standing angle can be adjusted as shown in pictures. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop. The set has Kensington Security System Connector on the back panel. Connect the Kensington Security system cable (not supplied). 12 3 Cleaning Unplug the set before cleaning the face of the LCD Screen. Dust the set by wiping the screen and the cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a clean, damp cloth. Do not use liquid cleaners or aerosol cleaners. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. 3 Location and function of controls All the functions Some functions panel can can of the set. operate this be controlled with the remote control handset. also be adjusted with the buttons on the front Only the remote control handset supplied will set. Remote control handset Before you use the remote control teries. See the next page. POWER 1 OPEN/CLOSE TV/AV 1. 2 MUTE I/II/AUDIO 3 PIP SWAP or off to standby. 3. MUTE switches the sound 4. PIP BUTTONS (option) PIP switches the sub picture on or off. PR +/selects a programme for the sub picture. SWAP alternates between main and sub picture. INPUT selects the input mode for the sub picture. SIZE adjusts the sub picture size. STILL (option) freezes motion of the sub picture. POSITION relocates the sub picture in up/down or left/right direction. SCAN switches on the programme scan mode through 3/12 sub tures and 9 main pictures. MENU PR EXIT 6 OK VOL VOL 7 PR 123 456 8 7 8 9 PSM 0 SSM 3D SOUND LIST/ZOOM MULTIMEDIA 9 SKIP SCAN DISC MENU REPEAT M PLAY/PAUSE /II STOP TITLE MENU 5. on or off. 6. SCAN PROGRAM A-B ANGLE POSITION SIZE 7. ? SCAN ARC previously selects a MENU selects a menu. viewed programme. favourite programme. D / E (Programme Up/Down) selects a programme or a menu item. switches the set on from standby. F / G (Volume Up/Down) adjusts the volume. adjusts 11 pic- SWAP returns to the SKIP 10 STILL standby INPUT 5 SLEEP from OPEN/CLOSE Open or close the disc tray. TEXT/SUB-T PR+ on 2. 4 PR- POWER switches the set handset, please install the bat- menu settings. OK accepts your selection 8. 9. NUMBER BUTTONS switches the set on from PSM (Picture Status recalls your preferred 10. SLEEP sets the sleep displays standby the current mode. and selects Memory) picture setting. timer. 11. STILL (option) freezes motion of the 4 or picture. a programme. Location and function of controls 12. TV/AV selects the remote mode. operating clears the menu from the screen. switches the set on from standby. 13. I/II/AUDIO (option) selects the language selects the sound changes during dual language broadcast. output (option). the AUDIO status during POWER DVD playback. OPEN/CLOSE 14. TELETEXT BUTTONS/SUB-T (option) These buttons are used for teletext. 12 MUTE For further details, see the 'Teletext' section. the subtitle language during DVD playback. I/II/AUDIO 13 changes PIP TEXT/SUB-T 14 15. EXIT exits from each mode. PR- (Sound Status Memory) recalls your preferred sound setting. 19. DVD BUTTONS controls a LG DVD player. For further details, see the 'DVD INPUT MENU PR EXIT 15 17. MULTIMEDIA selects DVD or PC monitor mode. clears the menu from the screen. switches the set on from standby. 18. LIST/ZOOM (option) displays the programme table. changes the picture size during DVD PR+ SWAP 16. SSM OK VOL VOL playback. PR Operation' section. 123 20. ARC 456 select your desired picture format. In teletext mode, the PR used for teletext function. Note TV/AV : +/-, SWAP and INPUT buttons 7 8 9 PSM 0 SSM 3D SOUND LIST/ZOOM MULTIMEDIA are 16 Battery installation 17 The remote control handset is powered by two AAA type batteries. To load the batteries, turn the remote control handset over and open the battery compartment. Install two batteries as indicated by the polarity symbols ( + and ) marked inside the compartment. SKIP SCAN PLAY/PAUSE /II STOP SKIP 18 SCAN 19 - DISC MENU REPEAT SLEEP STILL M TITLE MENU PROGRAM A-B ANGLE POSITION SIZE SCAN ? ARC 20 Note : To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control handset for an extended period of time. 5 Location and function of controls Top panel 12345 ON/OFF TV/AV/ DVD/PC MENU OK 6 VOL 9 PR STOP 10 PLAY/PAUSE SKIP/SCAN 14 11 SKIP/SCAN 12 REPEAT 13 OPEN/CLOSE 7 1. side 8 9. ON/OFF ( /I) switches the set on from standby or off to standby. Note is off. 2. : Power line lives even when the power TV/AV//DVD/PC 4. MENU selects or displays the current mode. (Volume Up/Down) adjusts the volume. adjusts menu settings. 6. D / E (Programme Up/Down) selects a programme or a menu item. switches the set on from standby. 7. REMOTE CONTROL SENSOR 8. LED (Light Emitting Diode) DISPLAY illuminates brightly when the set is switched 6 Start or pause playback. chapter or : POWER/STANDBY indicator : MONO indicator : STEREO indicator DUAL : DUAL indicator DPM : DPM indicator 13. OPEN/CLOSE Open or close the disc tray. Note : When DISC TRAY doesn't work, press the OPEN/CLOSE button on the side panel for a moment. F / G 5. ST 10. PLAY/PAUSE Repeat playback. OK STEREO Stops playback. 12. REPEAT a menu. accepts your selection MONO STOP 11. SKIP/SCAN Starts playback from the selected track. selects the remote operating mode. clears the menu from the screen. switches the set on from standby. 3. panel 14. DISC TRAY Place a disc a a on. the disc tray. disc after facing logo-printed side to front. See Note : Insert on figure. a Location and function of controls Back panel 7 AV S-VIDEO VIDEO 8 L/MON AUDIO R DC IN (15V) Y PB PR COMPONENT L R VIDEO DVD OUT AUDIO DVD/DTV IN 1 2 OPTICAL PC DIGITAL SOUND OUT SOUND PC INPUT ANT IN Side +75 ‰ 34 6 5 1. DC 15V INPUT SOCKET 2. DVD/DTV INPUT SOCKETS 3. DVD VIDEO OUT SOCKET 4. DVD DIGITAL SOUND OUT SOCKET Connect to 5. digital panel (Option) audio from various (Option) types of equipment. PC/SOUND INPUT SOCKETS Connect the monitor output socket of the PERSONAL COM- PUTER to this socket. 6. AERIAL SOCKET 7. HEADPHONE SOCKET Connect the 8. headphone plug to this socket. AUDIO/VIDEO IN SOCKETS (AV) Connect the audio/video out sockets of external equipment to these sockets. S-VIDEO/AUDIO IN SOCKETS (S-VIDEO) Connect the video out socket of an S-VIDEO VCR to the S- VIDEO socket. Connects the audio out sockets of the S-VIDEO VCR to the audio sockets as in AV. 7 Basic operation On and off 1. 2. 3. Press the POWER, D / E TV/AV, MULTIMEDIA or NUMBER buttons to switch it on fully. Press the POWER button. The set reverts to standby mode. Pull out mains plugs to switch the set off. , Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains plug is replaced in the mains power socket. POWER TV/AV MUTE I/II Programme selection You a can select programme number with the D / E or NUMBER buttons. Volume SWAP MENU PR EXIT adjustment Press the F / G button to adjust the volume. Quick view VOL OK VOL Press the SWAP button to view the last programme you were watching. Note : This function works only when Favourite programme is set to Off. Otherwise each press of this button will select a stored favorite programme. PR Mute function 123 Press the MUTE button. The sound is switched off and the 456 7 8 9 0 SSM MULTIMDIA appears. You can cancel it by pressing the MUTE, F / G , I/II or display SSM button. Auto Demonstration To review all the menus programmed in the set, press the OK button of the top panel controls for about 10 seconds. To stop auto demonstration, press any button of the top panel controls and the POWER button of the remote control. TV Swivel function You can manually turn TV set at left or right direction by 25 so that the watching degree is suitable for your position. On The screen language selection be displayed on the guage. First select your language. 1. menu 3. 4. 8 (option) screen in your desired lan- Press the MENU button and then D / E button to select the Special 2. can degrees, menu. Press the Press the All the on Press the Press the G button and then D / E button to select Language. F / G button to select your desired language. displays will appear in the selected language. OK button. EXIT button to return to normal TV viewing. screen On screen menus Menu selection 1. 2. Press the MENU button and then D / E button to display each menu. Press the G button and then D / E button to select a menu item. the setting of an item in the sub or pull-down menu with F/G button. You can move to the higher level menu by pressing the OK button and to move to the lower level menu by pressing the MENU button. Note : a. In the PC mode, the Station menu is not displayed. b. In the TV/AV mode, the RGB-PC menu is not displayed. c. In the teletext mode, menus are not displayed. d. On some models, the Language will not be displayed. 3. Change MENU PR EXIT Station Auto programme Manual programme System Storage from Programme edit Start BG 0 VOL Favourite programme DEFG OK MENU OK VOL EXIT Station menu PR Picture PSM Dynamic DRP On Storage System CSM Cool Channel 4 BG V/UHF 5 GGG Fine GGG Search Name DEFG OK MENU Picture CO5 EXIT menu Sound SSM Flat 0C03 5S69 AVL Off 1 BLN03 6S17 2C12 7S22 3S66 8C09 4S67 9C11 Delete Copy Move Skip Balance 0 DEFG OK MENU Sound EXIT menu Special TV Input Child lock Auto 1. Off 2. English 3. sleep Language Off Off 4. 5. DEFG OK MENU Special -- ----- -- ----- -- ----- -- ----- -- ----- EXIT menu TV programme 9 TV stations Setting up Station Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the D / E or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. Auto programme Manual programme Programme edit Favourite programme Auto programme DEFG OK MENU EXIT tuning All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. 1. 2. 3. Press the MENU button and then D / E button to select the Station menu. Press the G button and then D / E button to select Auto programme. Press the G button. Select a TV system with the F / G button on the System menu; Station Auto programme BG System Storage from Manual programme Programme edit 0 Start Favourite programme MENU VOL PR OK DEFG EXIT VOL 4. 5. PR 123 6. 7. OK MENU EXIT BG : (Asia/New Zealand/M.East/Africa/Australia) I : (Hong Kong/South Africa) DK : (East Europe/China/Africa/CIS) M : (USA/Korea/Philippines) (option) Press the D / E button to select Storage from. Select the beginning programme number with the F / G button or NUMBER buttons on the Storage from pull-down menu. Any number under 10 is entered with a numeric '0' in front of it, i.e. '05' for 5. Press the D / E button to select Start. Press the G button to begin auto programming. Station 456 Auto programme 78 BG System Storage from Manual programme Programme edit 9 0 Start Favourite programme 0 9 MENU C54 35% EXIT All receivable stations are stored. The station name is stored for stations which broadcast VPS (Video Programme Service), PDC (Programme Delivery Control) or TELETEXT data. If no station name can be assigned to a station, the channel number is assigned and stored as C (V/UHF 01-69) or S (Cable 01-47), followed by a number. Option: In Australia, if no station name can be assigned station, the channel number is assigned and stored as to a folstation name' section to ----- lowed assign number see the station name. by a 'Assigning a To stop auto programming, press the MENU button. When auto programming is completed, the Programme edit menu appears on the screen. See the 'Programme edit' section to edit the stored programme. 8. 10 Press the EXIT button to return to normal TV viewing. Setting up Manual programme TV stations Station tuning Auto programme Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name 1. Manual programme Programme edit Favourite programme with five characters to each programme number. Press the MENU button and then D / E button to select the Station DEFG OK MENU EXIT menu. 2. Press the G button and then D / E button to select Manual pro- 3. gramme. Press the G button and then D / E button to select Storage. Station Auto programme 4 Manual programme Storage System Programme edit Channel Favourite programme Fine BG V/UHF 5 GGG GGG Search Name DEFG 0-9 OK MENU 4. 5. 6. 7. 8. CO5 EXIT Select the desired programme number (0 to 99) with the F / G button or NUMBER buttons on the Storage menu. Any number under 10 is entered with a numeric '0' in front of it, i.e. '05' for 5. Press the D / E button to select System. Select a TV system with the F / G button on the System menu; BG : (Asia/New Zealand/M.East/Africa/Australia) I : (Hong Kong/South Africa) DK : (East Europe/China/Africa/CIS) M : (USA/Korea/Philippines) (option) Press the D / E button to select Channel. Press the F / G button to select V/UHF or Cable on the Channel menu. If possible, select the channel number directly with the number buttons. Any number under 10 is entered with a front of it, i.e. '05' for 5. 9. Press the D / E button to select Search. 10. Press the F/G button to commence searching numeric '0' menu. VOL PR OK on the Search EXIT VOL PR 123 456 78 If a station is found the search will 11. Press the OK button to store it. The display Stored will appear. pull-down in MENU 9 0 stop. Station Auto programme 4 Manual programme Storage System Programme edit Channel Favourite programme Fine BG V/UHF GGG Search Name DEFG 12. To store another OK MENU EXIT 5 GGG CO5 Stored station, repeat steps 3 to 11. 13. Press the EXIT button to return to normal TV viewing. 11 TV stations Setting up Assigning a station name 1. Repeat the 'Manual programme tuning' steps Station Auto programme Manual programme Programme edit 2. 3. Favourite programme 4. DEFG OK MENU EXIT 5. 6. 1 to 2. Press the G button and then D / E button to select Name. Press the G button and then D / E button to use a blank, +, the numeric 0 to 9 and the alphabet A to Z. Select the position by pressing the F / G button and then make your choice of the second character, and so on. Press the OK button to store it. The display Stored will appear. Press the EXIT button to return to normal TV viewing. Fine tuning Normally 1. 2. 3. MENU PR EXIT 4. -, fine tuning is only necessary if reception is poor. the 'Manual programme tuning' steps 1 to 2. Press the G button and then D / E button to select Fine. Repeat Press the F / G button to fine tune for the best sound on the Fine menu. Press the OK button to store it. picture and Station Auto programme VOL OK VOL Manual programme Storage System Programme edit Channel Favourite programme Fine 4 BG V/UHF GGG Search Name DEFG PR 456 0 12 MENU EXIT CO5 Stored display Stored will appear. Press the EXIT button to return to normal TV The 123 78 OK 5 GGG 9 5. viewing. by a yellow The finely tuned programme will be indicated ber during programme selection. num- Setting up Programme TV stations Station edit This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or insert a blank station data into the selected programme number. 1. 2. 3. Press the MENU button and then D / E button to select the Station menu. Press the G button and then D / E button to select Programme edit. Press the G button to display the Programme edit menu. Auto programme Manual programme Programme edit Favourite programme DEFG OK MENU EXIT Station Auto programme 0C0 35S Manual programme 1BLN03 6S17 Programme edit 2C12 7S22 Favourite programme 3S66 8C09 4S67 9C11 Delete Copy Move Skip DEFG Deleting 1. 2. a OK MENU EXIT 69 programme Select a programme to be deleted with the D / E orF/Gbutton. Press the RED button twice. The selected programme is deleted, all the following programmes are shifted up one position. MENU PR EXIT Station Auto programme 0C0 35S Manual programme Programme edit 1BLN03 6S17 69 2C12 7S22 Favourite programme 3S66 8C09 4S67 9C11 VOL OK VOL Delete MENU Copying 1. 2. 4. programme Select a programme to be copied with the D / E Press the GREEN button. All the following programmes are shifted down Moving 1. 2. 3. a EXIT or F / G button. PR 123 one position. 456 a programme Select a programme to be moved with the D / E orF/Gbutton. Press Move the D Press the YELLOW button. the programme to the desired programme number with / E orF/Gbutton. the YELLOW button again to release this function. 78 9 0 Station Auto programme 0C0 35S Manual programme 1BLN03 6S17 Programme edit 2C12 7S22 Favourite programme 3S66 8C09 4S67 9C11 DEFG MENU EXIT 69 Move Off a programme number Select a programme number to be skipped with the D / E or F / G button. Press the BLUE button. The skipped programme turns to blue. Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu. Skipping 1. 2. 3. Press the EXIT button to return to normal TV viewing. 13 Setting up Station TV stations Favourite programme Auto programme This function lets you select your favourite programmes Manual programme Programme edit 1. Favourite programme 2. directly. Press the MENU button and then D / E to select the Station menu. Press the G button and then D / E to select Favourite programme. DEFG OK MENU EXIT Station Auto programme On Manual programme 1. Programme edit 2. Favourite programme 3. 4. 5. DEFG 3. 4. 5. PR EXIT MENU ----- -- ----- -- ----- -- ----- -- ----- EXIT Press the G button and then F / G button to select On or Off. Press the D / E button to select -----. Select a desired programme with the F / G button or NUMBER buttons. Any number under 10 is entered with a numeric '0' in -- 6. front of it, i.e. '05' for 5. To store another programme, repeat You can store up to 5 programmes. 7. Press the EXIT button to return to normal TV SWAP MENU OK -- Repeatedly press steps 4 to 5. viewing. the SWAP button to select stored favourite pro- grammes. VOL OK VOL Calling the programme table You can check the programmes stored in the memory the programme table. Displaying programme PR 123 by displaying table Press the LIST button to display the Programme table menu. The programme table appears on the screen. One programme table contains ten programmes as below. 456 0C0 35S 6 9 78 1 9 0 BLN03 6S17 2C12 7 3S66 8C09 4S67 LIST/ZOOM DEFG Note a. b. S22 9C11 OK MENU EXIT : You may find some blue programmes. They have been set up to be skipped by auto programming or in the programme edit mode. Some programmes with the channel number shown in the programme table indicate there is no station name assigned. a programme in the programme table Select a programme with the D / E orF/Gbutton. Then press the OK button. The set switches to the chosen programme number. Selecting Paging through There are a programme table 10 programme table pages in which contain 100 pro- grammes. Pressing the D / E or F / G button repeatedly Press the LIST button to return to normal TV 14 turns the pages. viewing. Picture PSM 1. 2. 3. adjustment (Picture Status Memory) Picture PSM Press the MENU button and then D / E button to select the Picture menu. Press the G button and then D / E button to select PSM. Press the F / G button to select a picture setting on the PSM menu. Dynamic DRP On CSM Cool DEFG OK MENU EXIT Picture PSM Dynamic DRP On CSM Cool DEFG 4. OK MENU Contrast 90 Brightness 55 Colour 60 Sharpness 50 EXIT Press the EXIT button to return to normal TV viewing. You can also recall a desired picture (Dynamic, Standard, Mild, Game or User) with PSM button on the remote control. The picture Dynamic, Standard, Mild and Game are programmed for optimum picture reproduction at the factory and cannot be changed. Picture You can ness 1. 2. 3. MENU adjustment adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer. PR EXIT and tint Press the MENU button and then D / E button to select the Picture menu. Press the G button and then D / E button to select PSM. Press the OK button and then F / G button to make appropriate adjustments on each sub menu. VOL OK VOL PR Picture PSM User DRP On CSM Cool DEFG 4. 5. : DRP DRP 2. 3. 4. 5. MENU EXIT 90 Brightness 55 Colour 60 Sharpness 50 PSM Stored You can also select other User items directly with D / E button and adjust them with F / G button. Press the OK button to store it for the picture User. The display Stored will appear. Press the EXIT button to return to normal TV viewing. Note 1. OK Contrast Only Contrast and Brightness are displayed in PC mode. (Digital Reality Picture) improves image outlines in dark screens. Press the MENU button and then D / E button to select the Picture menu. Press the G button and then D / E button to select DRP. Press F / G button to select On or Off on the DRP menu. Press the OK button. Press the EXIT button to return to normal TV viewing. 15 Picture CSM Picture PSM Dynamic DRP On CSM Cool OK MENU EXIT (Colour Status Memory) You can adjust the levels you prefer. temperature of R, G, B (Red, Green, Blue) to the 2. Press the MENU button and then D / E button to select the Picture menu. Press the G button and then D / E button to select CSM. 3. Press the OK button. 1. DEFG adjustment Picture PSM User DRP On CSM Cool DEFG 4. Repeat the 'Picture OK MENU EXIT You OK VOL 42 EXIT 3 to 5. at the programmed are factory and can not for be Picture format can watch TV in various picture formats; Wide, 14:9, Zoom, 4:3. Auto, VOL 50 Blue adjustment' steps optimum picture reproduction changed. PR 48 temperature Cool, Normal and Warm The MENU Red Green Repeatedly press the ARC button to select your desired picture for- mat. Wide You can enjoy the cinema (the picture format of 16:9) or general TV programme through the 16:9 mode. The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full. PR 14:9 You can through enjoy the picture format of 14:9 the 14:9 mode. or The screen 14:9 is viewed just like that the to the upper / lower and left / right. general screen TV programme 4:3 is magnified Zoom You can enjoy the cinema in a vast screen through the Zoom mode. The screen 4:3 is magnified to the upper / lower and left / right sides so that the screen 16:9 is full. The bottom and top of the picture may be lost. Auto When your set receives the wide screen signal, it will be automatically changed to the picture format to be sent. (Not available in all countries) ARC 4:3 This picture Note a. b. c. 16 format is 4 to 3 of general TV. : In the double window and scan mode, ARC function isn't available. You are available to Wide and 4:3 in PC mode. You are available to Wide, 14:9, Zoom and 4:3 in DVD mode. Sound SSM You (Sound Status Memory) 2. Sound select your preferred sound setting; Flat, Music, Movie or and you can also adjust the sound frequency of the equalizer. can Speech 1. adjustment Flat AVL Off Balance 0 Press the MENU button and then D / E button to select the Sound menu. Press the G button and then D / E button to select SSM. DEFG Sound SSM Flat AVL Off Balance OK MENU EXIT Equalizer 0 DEFG 3. SSM OK MENU 0.1 EXIT Press the F / G button to select a sound Sound Frequency Adjustment 0.5 1.0 setting 5.0 on 10 kHz the SSM menu. Press the OK button in SSM. a. Sound SSM User AVL Off Balance Equalizer 0 MENU 0.1 DEFG b. Select a OK sound band MENU 0.5 1.0 5.0 PR EXIT 10 kHz Stored EXIT by pressing the F / G button. VOL OK VOL Make appropriate sound level with the D / E button. d. Press the OK button to store it for the sound User. c. The display Stored will appear. Press the EXIT button to return to normal TV You also recall viewing. desired sound setting (Flat, Music, Movie, Speech or User) with SSM button on the remote control. The sound settings Flat, Music, Movie and Speech are programmed for optimum sound reproduction at the factory and cannot be changed. can a PR If you press the SSM button after making appropriate adjustthe User sub menu, the display User automatically appears even though you have already set a factory preset setting; Note ment : on Flat, Music, Movie or Speech. SSM Sound adjustment You can adjust balance, AVL (Auto cally keeps on an equal volume level Volume even Leveler). AVL automatichange programmes. if you 1. Press the MENU button and then D Sound menu. button to select the 2. Press the G button and then D / E button to select the desired sound item; AVL or Balance. / E Sound SSM Flat AVL On Balance DEFG 3. 4. 0 OK MENU EXIT Make desired adjustment with the F / G and then press the OK button. Press the EXIT button to return to normal TV viewing. : In PC mode, you DW2, POP1 mode. Note can select Sound select menu in PIP, DW1, 17 Sound adjustment Stereo/Dual reception When a programme is selected, the sound information for the station appears after the programme number and station name disap- pear. Broadcast On Screen Mono MONO Stereo STEREO Dual DUAL I Display I/II Mono sound selection In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II button twice. In mono reception the depth of sound is improved. To switch back to stereo, press the I/II button twice again. selection for dual language broadcast programme is received in two languages (dual language), you switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II but- Language If a can ton repeatedly. DUAL I sends the primary broadcast language to the loudspeakers. DUAL II sends the secondary broadcast language to the loud- speakers. DUAL I+II sends NICAM a separate language to each loudspeaker. reception (option) If your set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of received broadcast as follows by pressing the I/II button repeatedly. 1. 2. 3. When NICAM mono is received, you can select NICAM MONO or FM MONO. When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM mono. When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or MONO. When FM mono is selected the display MONO appears on the screen. Sound output selection In AV mode, you can select output sound for the left and right loud- speakers. L+R : press the I/II button to select the sound output. Audio signal from audio L input is sent to left loud-speaker and audio signal from audio R input is sent to right loud- L+L : Audio Repeatedly R+R 18 : speaker. signal speakers. Audio signal speakers. from audio L input is sent to left and right loud- from audio R input is sent to left and right loud- Other functions TV, AV, DVD and PC modes Special TV Input be set for TV, AV, DVD or RGB-PC mode. AV mode is used when a video cassette recorder (VCR), or other equipment is connected to the set. Inputs can Note : When a VCR is connected via the aerial socket the set is used in TV mode. See the 'Connection of external equipment' section. 1. 3. Auto Off Off sleep English Language DEFG OK MENU EXIT Press the MENU button and then D / E button to select the Special 2. Child lock menu. Press the G button and then D / E button to select Input. Press the F / G button to select TV, AV, S-Video, DVD or RGBPC. Special TV Input Child lock Auto Off Off sleep English Language MENU DEFG 4. OK MENU PR EXIT EXIT The AV, DVD and RGB-PC modes are : AV : VCR connected to the AV of the set S-Video : VCR connected to the S-Video of the set DVD : DVD mode RGB-PC : PERSONAL COMPUTER connected to the socket of the set Press the EXIT button to return to normal TV viewing. VOL OK VOL PC PR 123 Alternatively pressing the you can select the TV, AV, DVD TV/AV button. or RGB-PC mode In AV or RGB-PC mode, to return to TV mode, press the D / E NUMBER buttons. by 456 78 9 or 0 19 Other functions Child lock Special TV Input Child lock Auto Off Off sleep English Language The TV can be set so that the remote control handset is needed to control it. This feature can be used to prevent unauthorized view- ing. 1. DEFG OK MENU EXIT Press the MENU button and then D / E button to select the Special 2. 3. menu. Press the G button and then D / E button to select Child lock. Press the F / G button to select On or Off on the Child lock menu. 4. Press the EXIT button to return to normal TV viewing. With the lock on, the display Child lock on appears on the screen if any button on the side panel is pressed while viewing the TV. Note : The display Child lock on will not appear on the screen if any button on the side panel is pressed while displaying the menus. Auto MENU PR EXIT sleep If you select On on the Auto sleep menu, the set will automaticalswitch itself to standby mode approximately ten minutes after a TV station stops broadcasting. ly VOL OK 1. VOL 2. 3. 4. PR Press the MENU button and then D / E button to select the Special menu. Press the G button and then D / E button to select Auto sleep. Press the F / G to select On or Off on the Auto sleep menu. Press the EXIT button to return to normal TV viewing. Sleep timer You don't have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time has elapsed. Press the SLEEP button to select the number of minutes. The dis---' will appear on the screen, followed by 10, 20, 30, 60, play z 90, 120, 180 and 240. The timer begins to count down from the number of minutes selected. ' Note : a. To view the remaining sleep time, press the SLEEP button once. b. To cancel the sleep time, repeatedly press the SLEEP button ---' until the display appears. z When you switch the set off, the set releases the preset sleep time. ' c. SLEEP 20 PIP Option PIP is operation (option) : an optional function, so that only the set with PIP function can operate. PIP (Picture in Picture) displays Select TV, AV, DVD or picture a PC mode to within picture. a operate PIP function. On and off Press the PIP button to switch Each time this button is displayed as PIP on pressed, the sub picture. each mode for the sub picture is shown below. DW1 DW2 PIP POP1 (PC mode Off only) PR- SWAP PR+ INPUT Press EXIT button to switch it off. EXIT Input mode selection for sub Press the INPUT button to select the picture (PC input mode mode for the sub Each time this button is pressed, each input mode for displayed as shown below. AV S-Video Programme number ture is Swapping between main and sub Press the SWAP button to Programme exchange picture. the sub VOL VOL pic- DVD pictures the main and sub selection for sub only) pictures. picture Press the PR +/- buttons to select a programme for the sub picture. The selected programme number is displayed just below the programme number of main picture. Sub picture size SIZE Press the SIZE button and then press the F/G button until desired size is achieved. The SIZE button doesn't work in DW1, DW2 and POP1 mode. Sub picture freeze STILL (option) Press the STILL button to freeze motion of the sub Press any button to restore motion. picture. 21 PIP operation (option) Sub picture position change Press the POSITION button and then press the D / E or F / G butuntil desired position is achieved. The sub pictures moves ton up/down or left/right. The POSITION button doesn't work in DW1, DW2 and POP1 mode. Programme scan (option) This function enables you to search all the stored stations pictures and 9 main pictures and see your favourite station ing PR EXIT the main and sub VOL picture pictures. PIP mode PIP RF (TV) PIP RF (TV) POP3 POP12 RF (TV) RF (TV) channel scan channel scan POP9 POP1 PC strobe (TV) RF AV AV AV strobe AV strobe PC strobe AV PC DVD DVD DVD strobe DVD strobe PC strobe DVD PC PC PC strobe PC strobe RF (TV) channel scan x AV PC PC PC strobe PC strobe AV strobe x DVD PC PC PC strobe PC strobe DVD strobe Note 22 main PC RF SCAN or Specification> Condition PC POSITION pictures. Press the EXIT button to switch off sub Main PR 3/12 sub Press the SCAN button repeatedly to select POP3/POP12/POP9. The selected sub or main pictures search all the stored stations. <PIP/POP VOL on by exchang- (TV) : The PIP picture resolution will be decreased by the x PIP size. Teletext (option) Teletext (or TOP text) is an optional function, therefore only with the teletext system can receive the teletext broadcast. Teletext is a set free service broadcast by most TV stations which gives information on news, weather, television programmes, share prices and many other topics. a up-to-the-minute The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information. TEXT Switch on/off Press the TEXT button to switch to teletext. The initial page or last page appears on the screen. Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the second shows the current page displayed. Press the TEXT or EXIT button to switch off teletext. The previous mode reappears. PR EXIT OK SIMPLE text selection Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number. The D / E button can be used to select the preceding or fol- Page 1. 2. lowing PR 123 456 78 page. 9 0 Programming colour button in LIST mode If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the M button to switch to LIST mode. a Four teletext page numbers of your choice can be colour coded and selected by pressing the corresponding coloured button on easily the remote control handset. 1. Press a 2. Using the NUMBER buttons, select the page you wish to pro- 3. gramme. Press the OK button. Then the selected page is stored as the selected page number by blinking once. From now on, you can 4. coloured button. M select this page with the same coloured button. The three other coloured buttons are programmed in this way. Note : In PIP of the PC mode, select the sub picture size is PIP, DW1, DW2, POP1. In PIP of the PC mode, the text on the screen may be unstable. 23 Teletext TOP text (option) (option) The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. Block / group / page selection 1. With the blue button you can progress from block to block. 2. Use the yellow button to proceed to the next group with automatic overflow to the next block. 3. With the green button you can proceed to the next existing page with automatic overflow to the next group. Alternatively the D button can be used. 4. The red button permits to return to previous selection. Alternatively the E button can be used. Direct page selection Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER buttons in PR TOP mode. FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. PR selection i button to select the index page. Press the You can select the pages which are colour coded along the bottom line with the same coloured buttons. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode. The D / E button can be used to select the preceding or fol- Page 123 1. 2. 456 78 9 3. 0 4. lowing 24 page. Teletext Special ? (option) teletext functions REVEAL Press this button to display concealed information, such as puzzles. again to remove the information from the solutions of riddles Press this button or display. SIZE Selects double height text. enlarge the top button again to enlarge Press this button to Press this page. Press this button again half of the page. the bottom half of the to return to the normal display. PR UPDATE Displays the TV picture on the screen while waiting for the new teletext page. The display will appear at the top left hand corner of the screen. When the updated page is available then will change to the page number. Press this button to view the updated teletext page. display PR HOLD Stops the automatic page text page consists of 2 change which will occur if a tele- sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed the stop symbol is 123 or more displayed at the top left-hand corner of the 456 78 9 0 and the automatic page change is inhibited. To continue press this button again. screen MIX Displays the teletext pages superimposed on the TV picture off press this button again. picture. To switch the TV ? TIME When viewing the time at the button again TV programme, press this button to display top right hand corner of the screen. Press this a to remove the display. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or the sub page, press the RED/GREEN, D / E NUMBER buttons. change Press again or to exit this function. 25 Connection of external You can connect additional etc. to your set. Examples equipment equipment, are such as VCRs, camcorders shown below. Aerial socket 1. Connect the RF out socket of the VCR to the aerial socket of the set. VCR 2. Connect the aerial cable to the RF aerial in socket of the VCR. 3. Store the VCR channel on a desired programme number using the 'Manual programme tuning' section. Select the programme number where the VCR channel is 4. stored. 5. Press the PLAY button on the VCR. DVD in sockets 1. Connect the DVD Y PB the set. or DVD Player 2. PR) output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y of the DVD to the DVD/DTV IN sockets (Y PB PR) of Connect the audio cable from the DVD to the AUDIO sockets of the set. 3. 4. Press the TV/AV or MULTIMEDIA button to select DVD. Press the PLAY button on the DVD. The DVD playback picture appears on the screen. DTV in sockets 1. SET TOP Box 2. Connect the SET TOP outputs to the DVD/DTV IN sockets (Y PB PR) of the set. Connect the audio cable from the SET TOP to the AUDIO sockets of the set. 3. Press the TV/AV or MULTIMEDIA button to select DVD. Audio/Video in sockets AV S-VIDEO 1. VIDEOL/MN 2. AUDIO Connect the audio/video out sockets of the VCR to audio/video in sockets of the set. 3. Press the TV/AV button to select AV. Press the PLAY button on the VCR. R The VCR S-VIDEO VCR 26 playback picture appears on the screen. Note : If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO socket of the set. Connection of external S-Video/Audio in sockets equipment (SAV) (option) AV S-VIDEO VCR to the S-VIDEO socket, the connecting picture quality will be further improved. When 1. 2. an Connect the S-Video socket of the VCR to the S-VIDEO socket of the set. 4. Select S-Video Insert the on playback picture Headphone the TV/AV button R repeatedly. the VCR. appears on the screen. socket AV headphone plug to the headphone socket of the set. You through the headphone. To adjust the head- S-VIDEO press the F / G button. If you press the MUTE butare switched VIDEO listen to the sound phone volume, ton, the sound from the headphone and TV's speaker off. L/MONAUDI S-VIDEO VCR by pressing Press the PLAY button The VCR can VIDEO Connect the audio cable from the S-VIDEO VCR to the AUDIO sockets of the set. 3. S-VIDEO L/MON AUDIO R 27 Connection of PC PC in socket 1. 2. 3. 4. PERSONAL COMPUTER (D-Sub jack) Connect the signal cable from the monitor output socket of the PERSONAL COMPUTER to the PC input socket of the set. Connect the audio cable from the PC to the PC SOUND sockets of the set. Press the TV/AV or MULTIMEDIA button to select PC. Switch on the PC, and the PC screen appears on the set. The set can be operated as the PC monitor. Note block : If you have Apple macintosh, connect the VGA desktop from the 3 row 15 pin to 2 row 15 pin with the cable and connect the VGA desktop block to the Macintosh. an (not supplied) signal Displayable MODE Monitor Specification Resolution Horizontal Frequency(KHz) VGA SVGA (MAC) XGA WXGA Vertical Frequency(Hz) 640x480 31.4KHz 60Hz 640x480 35KHz 67Hz 640x480 37.5KHz 75Hz 640x480 43.2KHz 85Hz 800x600 35.1KHz 56Hz 800x600 37.8KHz 60Hz 800x600 48KHz 72Hz 800x600 46.8KHz 75Hz 800x600 53.6KHz 85Hz 832x624 49.7KHz 75Hz 1024x768 48.3KHz 60Hz 1024x768 56.4KHz 70Hz 1024x768 60KHz 75Hz 1280x768 39.5KHz 50Hz 1280x768 47.6KHz 60Hz (Synchronization input form : separate) Note : a. If the set is cold, there may be a small "flicker" when the set is switched on. This is normal, there is nothing wrong with the set. b. If possible, use the VESA 1,024x768@60Hz video mode to obtain the best image quality for your LCD monitor. If used under the other resolutions, some scaled or processed pictures may appear on the screen. If used to PC vertical frequency 85Hz, some noise can be seen when PIP is on. In this case, set the PC vertical frequency to 60Hz. The set has been pre-adjusted to the mode VESA 1,024x768@60Hz. c. Some dot defects may appear on the screen, like Red, Green or Blue spots. However, this will have no impact or effect on the monitor performance. d. Do not press the LCD screen with your finger for a long time as this may produce some temporary distortion effects on the screen. e. When the PC screen appears on the set, a message may appear the screen, and the message will differ according to the Window system version (Win98, 2000). If a message appears click "Next" until the message finishes. If the message "out of Range" appears on the screen, adjust the PC as in the 'Displayable Monitor Specification' section. on f. DPM (Display Power Management) mode When the PC is in the power saving mode, automatically the itor goes into DPM mode to save the energy. Note : Use the supplied mode may not work. 28 signal mon- cable with the set. Otherwise, DPM Connection of PC Menu selection 1. 2. 3. Press the MENU button and then D / E button to display each menu. Press the G button and then D / E button to select a menu item. Change the setting of an item in the sub menu or the pull-down menu with F / G You can move to the higher level menu by pressing the OK button and to move to the lower level menu by pressing the MENU button. . Note : a. See 'Picture adjustment' section to adjust the picture. b. See 'Sound adjustment' section to adjust the sound. c. See 'TV, AV, DVD and PC modes' section to select TV, AV1, AV2, S-Video, DVD or RGB-PC. MENU VOL Sound Picture Dynamic SSM Flat DRP On AVL Off CSM Cool Balance EXIT DEFG PSM PR OK EXIT VOL 0 PR DEFG OK MENU Picture OK MENU Sound menu EXIT menu PC programme Special RGB-PC Menu H-Position 50 Input V-Position 50 Child lock Clock 50 Auto Phase 10 Language RGB-PC Off Off sleep English Auto-configure DEFG OK MENU RGB-PC EXIT menu DEFG OK MENU Special EXIT menu 29 Connection of PC PC RGB-PC Menu H-Position 50 V-Position 50 Clock 50 Phase 10 Auto-configure You can adjust horizontal/vertical position, clock, phase, configure as you prefer. 1. DEFG OK MENU Setup EXIT 2. and auto- Press the MENU button and then D / E button to select the RGB-PC menu. Press the OK desired or picture G button and then D / E button to select the item. RGB-PC Menu H-Position 50 V-Position 50 Clock 50 Phase 10 Auto-configure DEFG 3. MENU PR Press the F / G button to make H-Position / V-Position This function is to adjust EXIT OK picture MENU EXIT appropriate adjustments. to left/right and up/down as you prefer. VOL OK Clock VOL This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. Phase This function allows you to remove any horizontal noise and clear or sharpen the image of characters. PR Auto-configure This function is for the automatic adjustment of the screen posi- tion, clock and phase. The displayed image will disappear for few seconds while the Auto-configuration is in progress. a Note : Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor's position, clock and phase manually. 4. 5. 30 Press the OK button to store it for the PC monitor Press the EXIT button to return to PC mode. picture. DVD Notes Operation discs on On ? ? handling discs Do not touch the playback side of the disc. Do not attach paper or tape to discs. On ? storing discs Do not store discs in heat ? Do not store discs in bathroom or near a Store discs vertically a ? a place subject to direct sunlight or near sources. discs outside of their place subject to moisture and dust such as humidifier. in a case case. may Stacking or placing object warping. on cause On ? ? cleaning discs Fingerprints and dust on the disc cause picture rioration. Wipe the disc from the center outward Always keep the disc clean. Do not use and sound detewith a soft cloth. any type of solvent such as thinner, benzine, comor antistatic spray for vinyl LPs. It mercially available cleaners may damage the disc. Note : means " " " may appear on the TV screen during operation. A that the operation is not permitted by the unit or the disc. " Structure of disc contents DVD video disc disc ?????? Title ?? CAUTION: This Digital Video Disc Player employs a Laser System. To ensure proper use of this product, please read this owner's manual carefully and retain for future reference should the unit require maintenance, contact an authorized service location (see service procedure). Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. ?? CAUTION: The Chapter apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. Video CD/Audio CD Regional code of the DVD and player DVDs This disc Track ?? ?? Index ? ? ? Title :When two or more movies are recorded on a disc, the disc is divided into two or more sections. Each section is called a "TITLE". Chapter : The titles can be subdivided into many sections. Each section is called a "CHAPTER". Track : An audio CD can contain several items. These are assigned to the tracks. Note : If an MP3 or JPEG file CD is created using an incorrect method, the player may not be able to recognize it. If this happens, try reburning another CD after setting up the disc writing parameters correctly on your PC. DVD is player designed playback of region ?????? and manufactured for "2, 3, 4 or 5" encoded DVD software. The region code on the labels of some DVD discs indicates which type of player can play those discs. This unit can play only DVD discs labeled "2, 3, 4 or 5". If you try to play any other discs, the message "Check Regional Code" will appear on the TV screen. Some DVD discs may not have a region code label even though their playback is prohibited by area limits. "DTS" and "DTS trademarks of Digital Surround" Digital Theater System, are Inc. APPARATUS CLAIMS OF U.S. PATENT NOS. 4,631,603,4,577,216,4,819,098, AND 4,907,093 LICENSED FOR LIMITED VIEWING USER ONLY. 31 DVD Operation Playing a disc Basic playback 1. Press the POWER button to switch the set on. 2. Insert the disc into the side DVD slot after facing side to front. Playback starts. POWER a logo-printed To pause playback (still mode) 1. Press the PLAY/PAUSE G /II button during playback. 2. Press the PLAY/PAUSE G/II button again to return to normal OPEN/CLOSE playback. To stop playback Press the STOP button to stop PR VOL OK VOL playback. Note : a. To stop playback fully, press the STOP button in twice. b. In TV, AV or RGB-PC mode, to return to DVD mode, press the PLAY/PAUSE G /II button. c. In DVD mode, to return to TV mode, press the SWAP button. d. When you use a NTSC disc, the picture may be unstable. In that case, press the REPEAT button on the side panel to select NTSC broadcasting system for a moment after extracting the disc. To remove the disc Press the OPEN/CLOSE button and PR remove the disc after the disc completely ejected. SKIP SCAN PLAY/PAUSE /II STOP SKIP Playing in fast reverse or fast forward directions (for DVD, Video CD and Audio CD) 1. Press the SCAN GG or FF SCAN button during playback. 2. Each time you press SCAN GG or FF SCAN button, the playback speed changes. 3. Press the PLAY/PAUSE G/II button to resume normal playback. SCAN Playing in slow reverse or slow forward directions (for DVD and Video CD) 1. Press the PLAY/PAUSE G/II button and then press SCAN GG or FF SCAN button. 2. Each time you press SCAN GG or FF SCAN button, the playback speed changes. Note : There is no sound when in DVD and Video CD. viewing a chapter or track Press the SKIP GG I button Forward FAST or SLOW playback Locating during playback to locate Each time you press the or I FF SKIP button Reverse chapter that you want to watch. button, a chapter or track is skipped. a Note : a. If you press the SKIP GGI button Forward or IFF SKIP button Reverse in the still mode, one frame is displayed at a time. b. Depending on the disc, this function maybe operate differently. 32 DVD Operation OSD (On-screen Display) You can display the playback status on TV screen as following; Title, Chapter number, Playing time. Press the OK button during playback. Title, Chapter information appears on screen. Each time you press the OK button, the OSD changes as follows. Title Elapsed -> Title Remain -> Chapter Elapsed -> Chapter Remain -> Display off VCD : Single Elapsed -> Single Remain -> Total Elapsed -> Total Remain -> Display off Audio CD : Single Elapsed -> Single Remain -> Total Elapsed -> Total Remain DVD : Playing MP3 discs Load a MP3 disc 1. MP3 menu screen is displayed automatically depending MP3 disc's folder (directory) structure as shown below. 2. Using the D / E or F / G button to find the desired folder. 02:30 03:37 001 / 011 128K on PR G / MP3 O.S.T. - D 1 PICTURE 2 PICTURE 1 MP3 O.S.T. - VOL OK VOL 3 PICTURE 3 MP3 O.S.T. - Resolution 3. 4. 4 E 500 x 375 Press the OK button to select. the D / E button to find the desired MP3 title. Press the OK button to select. PR Using Playing JPEG file When a JPEG file is loaded, the table of contents is displayed on TV screen. 16 slide show transition modes are provided. Use PROGRAM button to switch the slide show transition mode. Transition modes Wipe Top -> Wipe Bottom -> Wipe Left -> Wipe Right -> Diagonal Wipe Left Top -> Diagonal Wipe Right Top -> Diagonal Wipe Left Bottom -> Diagonal Wipe Right Bottom -> Extend From Center V -> To Center H -> Compress To Center V -> Window H -> Window V -> Wipe From Edge To Center Move in From Top -> None -> Extend From Center H ZOOM PLAY/PAUSE /II STOP Compress Select the -> picture the picture, you want to see, by pressing the D / E button. The selected item shows as small size picture on the right side of File Menu Screen. Press the OK or PLAY/PAUSE G /II button to display the picture on the full screen. Press the PLAY/PAUSE G/II button to start slide show. Selecting : If you press the OK or PLAY/PAUSE G/II button while MP3 disc, the picture starts slide show. Note ing Image rotation and zoom There are 2 modes to rotate a picture D button : invert / E button : mirror play- : Press the ZOOM button and viewing zoom mode in 50% 200%, by pressing the SCAN GG or FF SCAN button. Adjust the picture position with the D / E or F / G buttons in enlarged picture mode. To finish ZOOM mode, press the ZOOM button one more time. ~ To finish viewing picture, press the STOP button. 33 DVD Operation Selecting 1. 2. disc menu Press the DISC MENU button during playback. Press the D / E F / G, OK or NUMBER buttons to select the , desired item. Selecting 1. Press the TITLE MENU button Press the D / E desired item. OK VOL 456 can play DVD : VCD : NUMBER buttons to select the disks, you can't select the disc a specific title, chapter, the disc, Note ble. : A-B repeat playback Depending on or title track menu. segment repeatedly. or repeat mode changes repeat playback may repeat playback allows you selected to not be possi- repeat material between two points. A-B 1. Press the A-B button to select the start 2. Press the A-B button Playback 3. starts at again to select the point that you at the end point, again. Repeatedly returns to Point A press the A-B button back. "Off" appears 34 during playback. 9 A-B REPEAT some or Chapter -> Title -> ALL -> Repeat Off Track -> ALL -> Repeat Off Audio CD : Track -> ALL -> Random -> Repeat Off MP3 : Random -> Track -> Repeat Track -> Repeat Directory -> Off 123 0 In G, OK Press the REPEAT button during playback. Each time you press the REPEAT button, the as follows. PR 78 : F / , Repeat playback You VOL menu 2. Note PR title on the screen. point during playback. point. selected. Playback stops automatically, then starts the end again to resume normal play- DVD Operation Programme playback You 1. can arrange the order of tracks the disc. on Press the PROGRAM button in the stop mode or during play- back. 2. 3. Press the D / E button to select the programme position. Press the NUMBER buttons to input the desired Title or Track numbers. Track 06/06 Programme 00:03 : Track (01 - 06) 01 06 02 07 03 08 04 09 05 10 Exit 4. Note Depending possible. : Selecting If your 2. the the disc, programme on PR playback. playback may not be VOL camera angle. b. can only change angles of scenes. The angle function The PR 123 456 the angle for DVDs that provide multiple 78 9 0 will not work on DVD video discs that do not 3D SOUND contains recorded c. VOL angles, you can easily are watching. Press the ANGLE button during playback. Repeatedly press the ANGLE button to select the desired Note : a. You OK angle recorded from multiple the camera angle of the scene you scene was change 1. Right To programme others, repeat Step 2 to 3. Press the PROGRAM button to resume normal multiple angles. number of angles varies from disc to disc. 3D sound To enjoy various surround sounds, when you can select any by pressing the 3D SOUND button. desired sound effect 1. Press the 3D SOUND button 2. Each press of the 3D SOUND button play as shown below. during playback. changes ANGLE the sound dis- Reverb Off Concert Arena Bathroom Living Room Hall 35 DVD Operation Picture size 1. 2. 3. AUDIO SUB-T DVD and Video (for zoom When enlarging or unnatural picture. reducing the picture, PR CD) screen may be display Press the ZOOM button in the stop mode or during playback. Each press of the ZOOM button changes the screen display as shown below. 2x->3x->4x->1/2->1/3->1/4 with the D / E / F / G buttons Adjust the main picture position in enlarged picture mode. Selecting a audio Set this value to the language (STOP preferred mode only) audio is selected, whenever you start audio language is played. (If the the disc.) MENU the language. If an audio language playing a new disc, the selected selected language is contained in 1. Press the MENU button in twice and then 2. to select Audio Language. Press the G button and then D / E button to select your desired use the D / E button language. VOL OK VOL Audio Language Language G Menu English Language French German Level Rating Spanish New Password Italian Chinese Polski TV Screen OSD PR Original Korean Subtitle Language Japanese Digital Output Special 123 456 78 0 9 DE 3. 4. Move : G Press the OK button. Press the MENU button to : Next resume You can also select a desired audio on the remote control. normal playback. with AUDIO button language ZOOM Selecting a subtitle mode language (STOP only) Set this value to the preferred subtitle language. If a subtitle language is selected, whenever you start playing a new disc, the selected subtitle language is played. (If the selected language is contained in the disc.) 1. Press the MENU button in twice and then 2. to select Subtitle Language. Press the G button and then D / E button to select your desired use the D / E button language. Audio Language Language Original Subtitle Menu G Rating French German Level Spanish New Password Italian TV Screen OSD Korean English Language Chinese Polski Language Japanese Digital Output Special DE 3. 4. : Move Press the OK button. Press the MENU button to G : Next resume You can also select a desired subtitle on the remote control. 36 normal playback. language with SUB-T button DVD Disc You (If 1. menu can selection language select the the selected language of the disc menu messages language is contained in the disc.) Press the MENU button in twice and then to select Menu 2. Operation use of DVDs. the D / E button Language. Press the G button and then D / E button to select your desired language. Audio Language Original Korean Subtitle Language Language Menu G Level Rating French Spanish New Password Italian Chinese Polski TV Screen OSD English German Language Japanese Digital Output Special DE 3. G : PR Next Press the OK button. The 4. MENU Move : displays menu on screen guage. Press the MENU button to Parental control will appear in the selected lan- resume normal VOL OK VOL playback. setting PR Some discs are specified not suitable for children. Such discs be prevented from play back with the set. 1. Press the MENU button in twice and then to select Rating Level. 2. Press the G button and then use use can 456 the D / E button NUMBER buttons to input 123 a 4- 78 9 0 digit password. Audio Language Subtitle Menu Language Language Rating Level G New Password TV Screen OSD Language Digital Output Special DE Be 3. 4. : Move G : 8 Adult 7 NC-17 6R 5 PG-R 4 PG-13 3PG 2G 1 Kids 0 Next Unlock to remember this number! sure If you input a wrong number, press the EXIT button. Press the D / E button to select from the level 0 to level 8. The limitation will be more severe as the level number is upper. Level 0 : The Level 1 : DVD software for adults cannot be Level 8 : All DVD software parental control Press the MENU button to Note : If you forgot your setting can be resume password, does not function. played played back. back. normal playback. press '7', '7', '7', '7' on the remote control handset. 37 DVD To 1. Operation change the password Press the MENU button in twice and then Rating Level. Press the G button and then use the D / E button to select 2. use NUMBER buttons to input a 4- digit password. 3. Press the F button and then use the D / E button to select New Password. Audio Language Subtitle Menu Language Language Level Rating New Password ---- G TV Screen OSD Language Digital Output Special MENU DE PR OK VOL G : Next 5. Press the G button and then enter your Re-enter new password for confirm. Password change is finished. 6. Press the MENU button to 4. VOL Move : resume new password normal playback. in 4 digits. TV Screen PR You can watch TV in various picture formats. 123 1. 456 78 Press the MENU button in twice and then use the D / E button to select TV Screen. 9 Audio Language Subtitle 0 Menu Language Language Rating Level New Password TV Screen OSD G 4:3LB 4:3PS Language 16:9Wide Digital Output Special DE 2. : Move G : Next Press the G button and then D / E button to select 4 : 3 LB, 4:3PS,or16:9Wide. Letter Box Pan & Scan 3. Press the OK button. 4. Press the MENU button to Note sible. 38 (4:3 LB) : Depending on (4:3 PS) resume the disc, TV normal screen 16:9 Wide playback. function may not be pos- DVD Disc OSD selection language Operation (option) The menu can be displayed on the screen in your desired language. First select your language. (If the selected language is contained in the disc.) 1. Press the MENU button in twice and then to select OSD 2. use the D / E button Language. Press the G button and then D / E button to select your desired language. All the 3. on screen Note : On some audio language. not be displayed. output Press the MENU button in twice and then to select 2. will appear in the selected resume normal playback. models, the OSD Language will Selecting digital 1. displays Press the MENU button to use the D / E button MENU PR Digital Output. Press the G button and then D / E button to select OFF, RAW PCM. or VOL Audio Subtitle Menu OK VOL Language Language Language Rating Level New Password TV Screen OSD PR Language Digital Output Special DE Move : G OFF RAW G : Next 123 PCM 456 3. 4. Press the OK button. Press the MENU button to 78 resume normal 9 playback. 0 DRC (Dynamic Range Compression) DRC (Dynamic Range compression) enables you to dynamic range so as to achieve a suitable sound for control the your equip- ment. 1. Press the MENU button in twice and then to select 2. use the D / E button Special. Press the G button and then D / E button to select DRC Off DRC On. Audio Language Subtitle Menu or Language Language Rating Level New Password TV Screen OSD Language Digital Output Special G DE : Move 3. Press the OK button. 4. Press the MENU button to DRC Off G : Next resume DRC On normal playback. 39 Troubleshooting check list Symptoms No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in Poor picture reception on some channels No colour Poor colour Remote control does not work Incorrect position Vertical bars or stripes on background Horizontal noise Signal Cable message appears Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched Try on another channel (weak signal) Check aerial (plugged into Check aerial (broken lead?) TV?) Check aerial Check for local interference Adjust contrast Adjust brightness Adjust colour Adjust volume Check the batteries in remote control Check Audio/Video sockets Auto-configure or adjust (VCR only) the H/V Auto-configure or adjust Clock Auto-configure or adjust Phase Is the Signal Cable connected position or loose
advertisement
Related manuals
advertisement