LG KZ-17LZ21 Owner’s Manual

Digital
LCD Combi TV
OWNER'S MANUAL
Please read this manual
carefully
before
operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back cover and quote this inforrequire service.
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828TUL287F(0410-REV01)
Printed in Korea
Contents
Installation
3
Location and function of controls
4
Remote control handset
Battery installation / Top/Back/Side
Basic
panel
8
operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
TV Swivel function / On screen language selection
On
(option)
9
screen menus
Menu selection
TV stations
Auto programme tuning / Manual programme tuning
Fine Tuning / Programme edit
Favourite programme / Calling the programme table
Setting up
10
Picture
15
adjustment
PSM (Picture Status Memory)
Picture adjustment / DRP (Digital Reality Picture)
CSM (Colour Status Memory) / Picture format
Sound
17
adjustment
SSM (Sound Status Memory)
Sound adjustment / Stereo/Dual reception
NICAM reception (option) / Sound output selection
Other functions
19
TV, AV, DVD and PC modes / Auto AV switching
Child lock / Auto
sleep
/
Sleep
timer
PIP operation (option)
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze (option)
Sub picture position change / Programme scan (option)
21
Teletext
23
(option)
Switch on/off / SIMPLE text / TOP text
FASTEXT / Special teletext functions
Connection of external
(option)
26
equipment
Aerial socket / Euro scart socket
Audio/Video in sockets
S-Video/Audio in sockets (S-Video)
Headphone socket
(option)
Connection of PC
PC in socket (D-Sub
Menu selection / PC
28
jack)
Setup
DVD Operation
Notes on discs / Playing a disc / Playing MP3 discs
Playing JPEG file / Selecting disc menu
Selecting title menu / Repeat playback
A-B repeat playback / Programme playback
Selecting the camera angle / 3D sound
Picture size zoom / Selecting a audio language
Selecting a subtitle language
Disc menu language selection
Parental control setting / To change password
TV Screen / Disc OSD language selection (option)
Selecting digital audio output
DRC (Dynamic Range Compression)
Troubleshooting
2
check list
31
Installation
Power
E
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
a. Open the back panel cover.
b. After connecting the power cord to the set, connect the power
cord to an AC mains.
c. Close the back panel cover.
Warning
a
c
b
To prevent fire or shock hazard, do not expose the set to rain or
moisture. Do not rub or strike the Active Matrix LCD with anything
hard as this may scratch, mar, or damage the Active Matrix LCD
permanently.
Service
Never
remove
the back
cover
of the set as this can expose you to
the set does not operate proper-
high voltage and other hazards. If
ly, unplug it and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω on the back.
For the best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
This standing angle can be adjusted as shown in pictures.
When you install the set to use the wall mounting bracket (optional
parts), fix it carefully so as not to drop. The set has Kensington
Security System Connector on the back panel. Connect the
Kensington Security system cable (not supplied).
12
3
Cleaning
Unplug the set before cleaning the face of the LCD Screen. Dust
the set by wiping the screen and the cabinet with a soft, clean cloth.
If the screen requires additional cleaning, use a clean, damp cloth.
Do not use liquid cleaners or aerosol cleaners.
Manufactured under license from Dolby Laboratories. "Dolby"
and the double-D symbol are trademarks of Dolby Laboratories.
3
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set. Only the remote control handset supplied will
operate this
set.
Remote control handset
Before you use the remote control
teries. See the next page.
POWER
1
OPEN/CLOSE
TV/AV
1.
2
MUTE
3
2.
PIP
TEXT/SUB-T
PR+
SWAP
standby
or
off to
standby.
close the disc
or
tray.
3.
MUTE
switches the sound
4.
PIP BUTTONS (option)
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL (option)
freezes motion of the sub picture.
POSITION
relocates the sub picture in up/down or left/right direction.
SCAN
switches on the programme scan mode through 3/12 sub
tures and 9 main pictures.
MENU
PR
EXIT
6
OK
VOL
VOL
7
PR
123
456
8
7
8
9
PSM
0
SSM
3D SOUND
LIST/ZOOM
MULTIMEDIA
9
SKIP
SCAN
DISC MENU
REPEAT
M
PLAY/PAUSE /II
STOP
TITLE MENU
5.
on or
off.
6.
SCAN
PROGRAM
A-B
ANGLE
POSITION
SIZE
SCAN
pic-
SWAP
returns to the
SKIP
7.
?
10
STILL
from
INPUT
5
SLEEP
on
OPEN/CLOSE
Open
4
PR-
POWER
switches the set
I/II/AUDIO
handset, please install the bat-
ARC
a
MENU
selects
a menu.
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
F / G (Volume Up/Down)
adjusts the volume.
adjusts
11
previously viewed programme.
favourite programme.
selects
menu
settings.
OK
accepts your selection
8.
9.
NUMBER BUTTONS
switches the set on from
PSM (Picture Status
recalls your preferred
10. SLEEP
sets the
sleep
displays
standby
the current mode.
and selects
Memory)
picture setting.
timer.
11. STILL (option)
freezes motion of the
4
or
picture.
a
programme.
Location and function of controls
12. TV/AV
selects the remote operating mode.
clears the menu from the screen.
switches the set
on
from
standby.
13. I/II/AUDIO (option)
selects the language during dual language broadcast.
selects the sound output (option).
changes
the AUDIO status
during
14. TELETEXT BUTTONS/SUB-T
DVD
POWER
playback.
OPEN/CLOSE
(option)
changes
the subtitle
language during
DVD
TV/AV
12
These buttons are used for teletext.
For further details, see the 'Teletext' section.
MUTE
I/II/AUDIO
13
playback.
PIP
TEXT/SUB-T
14
15. EXIT
exits from each mode.
PR-
PR+
SWAP
16. SSM (Sound Status Memory)
recalls your preferred sound setting.
INPUT
MENU
PR
EXIT
15
17. MULTIMEDIA
selects DVD or PC monitor mode.
clears the menu from the screen.
switches the set
on
from
18. LIST/ZOOM (option)
displays the programme table.
changes the picture size during DVD
OK
VOL
standby.
playback.
19. DVD BUTTONS
controls a LG DVD player.
For further details, see the 'DVD
20. ARC
select your desired
Note
:
In teletext
VOL
PR
Operation'
section.
123
456
picture
format.
mode, the PR +/-, SWAP and INPUT buttons
7
8
9
PSM
0
SSM
3D SOUND
LIST/ZOOM
MULTIMEDIA
are
used for teletext function.
16
Battery
installation
17
The remote control handset is powered by two AAA type batteries.
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
SKIP
SCAN
PLAY/PAUSE /II
STOP
SKIP
18
SCAN
19
-
DISC MENU
REPEAT
SLEEP
STILL
M
TITLE MENU
PROGRAM
A-B
ANGLE
POSITION
SIZE
SCAN
?
ARC
20
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
5
Location and function of controls
Top panel
12345
ON/OFF
TV/AV/
DVD/PC
MENU
OK
6
VOL
9
PR
STOP
10
PLAY/PAUSE
SKIP/SCAN
14
11
SKIP/SCAN
12
REPEAT
13
OPEN/CLOSE
side
78
1.
ON/OFF (
9.
/I)
switches the set
on
from
standby
or
off to
standby.
Note
is off.
2.
:
Power line lives
even
when the power
TV/AV//DVD/PC
4.
MENU
selects
OK
or
displays
the current
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
6.
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
LED (Light Emitting Diode) DISPLAY
illuminates brightly when the set is switched
MONO indicator
:
STEREO indicator
DUAL
:
DUAL indicator
DPM
:
DPM indicator
ST
6
POWER/STANDBY indicator
:
MONO
or
playback.
pause
chapter
or
13. OPEN/CLOSE
Open
or
close the disc
14. DISC TRAY
Place a disc
Note
REMOTE CONTROL SENSOR
STEREO
Start
tray.
Note : When DISC TRAY doesn't work, press
the OPEN/CLOSE button on the side panel
for a moment.
F / G
5.
:
10. PLAY/PAUSE
Repeat playback.
mode.
8.
Stops playback.
12. REPEAT
a menu.
accepts your selection
7.
STOP
11. SKIP/SCAN
Starts playback from the selected
track.
selects the remote operating mode.
clears the menu from the screen.
switches the set on from standby.
3.
panel
a
a
on.
:
Insert
on
tray.
disc after facing
side to front. See
a
logo-printed
figure.
the disc
Location and function of controls
Back
panel
7
AV2
S-VIDEO
VIDEOL/MNAU
8
R
DC IN
(15V)
1
VIDEO
DVD OUT
1
2
OPTICAL
PC
DIGITAL
SOUND
OUT
SOUND
PC INPUT
Side
ANT IN
+75 ‰
34
6
5
1.
DC 15V INPUT SOCKET
2.
EURO SCART SOCKET (AV1)
3.
DVD VIDEO OUT SOCKET
4.
(option)
DVD DIGITAL SOUND OUT SOCKET
Connect to
5.
panel
digital
audio from various
(option)
types of equipment.
PC/SOUND INPUT SOCKETS
Connect the monitor
output socket of the PERSONAL COM-
PUTER to this socket.
6.
AERIAL SOCKET
7.
HEADPHONE SOCKET
Connect the
8.
headphone plug
AUDIO/VIDEO IN SOCKETS
to this socket.
(AV2)
Connect the audio/video out sockets of external
equipment
to
these sockets.
S-VIDEO/AUDIO IN SOCKETS
(S-VIDEO)
Connect the video out socket of
an
S-VIDEO VCR to the S-
VIDEO socket.
Connects the audio out sockets of the S-VIDEO VCR to the
audio sockets
as
in AV2.
7
Basic
operation
On and off
1.
2.
3.
Press the POWER, D / E, TV/AV, MULTIMEDIA or NUMBER
buttons to switch it on fully.
Press the POWER button. The set reverts to standby mode.
Pull out mains plugs to switch the set off.
Note
: If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
POWER
TV/AV
MUTE
I/II
Programme
selection
You
a
can
select
programme number with the D / E
or
NUMBER
buttons.
Volume
SWAP
MENU
PR
EXIT
adjustment
Press the F / G button to
adjust
the volume.
Quick view
VOL
OK
VOL
Press the SWAP button to view the last programme you
were
watching.
Note : This function works only when Favourite programme is set
to Off. Otherwise each press of this button will select a stored
favorite programme.
PR
Mute function
123
Press the MUTE button. The sound is switched off and the
456
7
8
9
0
SSM
MULTIMDIA
appears.
You can cancel it
by pressing
the
MUTE,
F /
G, I/II
or
display
SSM button.
Auto Demonstration
To review all the menus programmed in the set, press the OK button of the top panel controls for about 10 seconds. To stop auto
demonstration, press any button of the top panel controls and the
POWER button of the remote control.
TV Swivel function
You can manually turn TV set at left or right direction by 25
so that the watching degree is suitable for your position.
On
The
screen
language
selection
be displayed on the
guage. First select your language.
1.
menu
3.
4.
8
(option)
screen
Press the MENU button and then D / E
Special
2.
can
degrees,
in your desired lanbutton to select the
menu.
Press the
Press the
All the on
Press the
Press the
G button and then D / E button to select Language.
F / G button to select your desired language.
displays will appear in the selected language.
OK button.
EXIT button to return to normal TV viewing.
screen
On
screen menus
Menu selection
1.
2.
3.
Press the MENU button and then D / E button to display each menu.
Press the G button and then D / E button to select a menu item.
Change the setting of an item in the sub or pull-down menu with
F / G button.
You can move to the
ton and to
level
higher
menu
to the lower level
move
by pressing the OK butby pressing the MENU
menu
button.
Note :
a.
In the PC mode, the Station menu is not displayed.
b. In the TV/AV mode, the RGB-PC menu is not displayed.
c.
In the teletext mode, menus are not displayed.
d.
On some models, the Language will not be displayed.
MENU
PR
EXIT
Station
Auto programme
System
Manual programme
Storage from
Programme edit
Start
BG
0
VOL
Favourite programme
DEFG
OK
MENU
Station
OK
VOL
EXIT
menu
PR
Picture
PSM
Dynamic
DRP
On
CSM
Cool
4
Storage
BG
System
Channel
V/UHF
5
GGG
Fine
GGG
Search
Name
DEFG
OK
MENU
Picture
CO5
EXIT
menu
Sound
SSM
Flat
0C03
5S69
AVL
Off
1
BLN03
6S17
2C12
7S22
3S66
8C09
4S67
9C11
Delete
Copy
Move
Skip
Balance
0
DEFG
OK
MENU
Sound
EXIT
menu
Special
TV
Input
Child lock
Auto
1.
Off
2.
English
3.
sleep
Language
Off
Off
4.
5.
DEFG
OK
MENU
Special
--
-----
--
-----
--
-----
--
-----
--
-----
EXIT
menu
TV programme
9
Setting up
Station
TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you have programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
Manual programme
Programme edit
Favourite programme
Auto programme
DEFG
OK
MENU
tuning
EXIT
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Auto programme.
Station
Auto programme
BG
System
Storage from
Manual programme
Programme edit
0
Start
Favourite programme
MENU
PR
DEFG
EXIT
3.
OK
MENU
EXIT
Press the G button. Select a TV system with the F / G button
the System menu;
L
: SECAM L/L' (France)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I
: PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
Press the D / E button to select Storage from.
Select the beginning programme number with the F / G button
or NUMBER buttons on the Storage from pull-down menu. Any
number under 10 is entered with a numeric '0' in front of it, i.e.
'05' for 5.
Press the D / E button to select Start.
Press the G button to begin auto programming.
on
VOL
OK
VOL
4.
5.
PR
123
456
6.
7.
78
9
Station
0
Auto programme
System
Manual programme
Programme edit
Storage from
BG
0
Start
Favourite programme
9
MENU
C54
35%
EXIT
All receivable stations are stored. The station name is stored for
stations which broadcast VPS (Video Programme Service),
PDC (Programme Delivery Control) or TELETEXT data. If no
station name can be assigned to a station, the channel number
is assigned and stored as C (V/UHF 01-69) or S (Cable 01-47),
followed by a number.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
8.
10
Press the EXIT button to return to normal TV
viewing.
TV stations
Setting up
Manual programme
Station
tuning
Auto programme
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name
1.
Manual programme
Programme edit
Favourite programme
with five characters to each programme number.
Press the MENU button and then D / E button to select the
Station
DEFG
OK
MENU
EXIT
menu.
2.
Press the G button and then D / E button to select Manual pro-
3.
gramme.
Press the G button and then D / E button to select
Storage.
Station
Auto programme
4
Manual programme
Storage
System
Programme edit
Channel
Favourite programme
Fine
BG
V/UHF
5
GGG
GGG
Search
Name
DEFG 0-9 OK MENU
4.
6.
7.
8.
EXIT
Select the desired programme number (0 to
button or NUMBER buttons on the Storage
under 10 is entered with
5.
CO5
with the F / G
Any number
99)
menu.
numeric '0' in front of it, i.e. '05' for 5.
Press the D / E button to select System.
Select a TV system with the F / G button on the System menu;
L
: SECAM L/L' (France)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I
: PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
MENU
PR
EXIT
a
Press the D / E button to select Channel.
Press the F / G button to select V/UHF
Channel menu.
Cable
or
If
possible, select the channel number directly
buttons. Any number under 10 is entered with
on
the
with the number
numeric '0'
a
in
front of it, i.e. '05' for 5.
9.
Press the D / E button to select Search.
10. Press the F / G button to commence searching on the Search
pull-down menu. If a station is found the search will stop.
VOL
OK
VOL
PR
123
456
78
9
0
11. Press the OK button to store it.
The
display
Stored will appear.
Station
Auto programme
4
Storage
System
Manual programme
Programme edit
Channel
Favourite programme
Fine
BG
V/UHF
GGG
Search
Name
DEFG
12. To store another
OK
MENU
EXIT
5
GGG
CO5
Stored
station, repeat steps 3
to 11.
13. Press the EXIT button to return to normal TV
viewing.
11
TV stations
Setting up
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
Station
Auto programme
Manual programme
2.
Programme edit
3.
Favourite programme
4.
DEFG
OK
MENU
EXIT
5.
6.
1 to 2.
Press the G button and then D / E button to select Name.
Press the G button and then D / E button to use a blank, +,
the numeric 0 to 9 and the alphabet A to Z.
Select the position by pressing the F / G button and then make
your choice of the second character, and so on.
Press the OK button to store it.
The display Stored will appear.
Press the EXIT button to return to normal TV viewing.
Fine
tuning
Normally
1.
2.
MENU
PR
EXIT
-,
fine
tuning
is
only
necessary if
reception
is poor.
the 'Manual programme tuning' steps 1 to 2.
Press the G button and then D / E button to select Fine.
Repeat
3.
Press the F / G button to fine tune for the best
sound on the Fine menu.
4.
Press the OK button to store it.
picture
and
Station
VOL
OK
VOL
Auto programme
Storage
Manual programme
Programme edit
System
Channel
Favourite programme
Fine
Search
Name
DEFG
PR
456
0
12
MENU
EXIT
V/UHF
5
GGG
GGG
CO5
Stored
display Stored will appear.
Press the EXIT button to return to normal TV viewing.
The finely tuned programme will be indicated by a yellow
The
123
78
OK
4
BG
9
5.
ber
during
programme selection.
num-
TV stations
Setting up
Programme
Station
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
2.
3.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Programme
edit.
Press the G button to display the Programme edit menu.
Auto programme
Manual programme
Programme edit
Favourite programme
DEFG
OK
MENU
EXIT
Station
Auto programme
0C0 35S
1BLN03
6S17
Programme edit
2C12
7S22
Favourite programme
DEFG
Deleting
1.
2.
a
69
Manual programme
OK
MENU
EXIT
3S66
8C09
4S67
9C11
Delete
Copy
Move
Skip
programme
Select a programme to be deleted with the D / E or F / G button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
MENU
PR
EXIT
Station
Auto programme
0C0 35S
Manual programme
1BLN03
6S17
69
Programme edit
2C12
7S22
Favourite programme
3S66
8C09
4S67
9C11
VOL
OK
VOL
Delete
MENU
Copying
1.
2.
programme
Select a programme to be copied with the D / E
Press the GREEN button.
All the following programmes are shifted down
Moving
1.
2.
3.
a
EXIT
or
F / G button.
PR
123
one
position.
456
a
programme
Select a programme to be moved with the D / E
or F / G button.
Press the YELLOW button.
Move the programme to the desired programme number with
78
9
0
theD/EorF/Gbutton.
4.
Press the YELLOW button
again
to release this function.
Station
Auto programme
0C0 35S
Manual programme
Programme edit
1BLN03
6S17
2C12
7S22
Favourite programme
3S66
8C09
4S67
9C11
DEFG
MENU
EXIT
69
Move Off
a programme number
Select a programme number to be skipped with the D / E or F / G
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped programme.
When a programme number is skipped it means that you will be
unable to select it using the D / E button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Skipping
1.
2.
3.
Press the EXIT button to return to normal TV
viewing.
13
Setting up
Station
TV stations
Favourite programme
Auto programme
This function lets you select your favourite programmes
Manual programme
Programme edit
1.
Favourite programme
2.
directly.
Press the MENU button and then D / E to select the Station menu.
Press the G button and then D / E to select Favourite programme.
DEFG
OK
MENU
EXIT
Station
Auto programme
On
Manual programme
Programme edit
2.
Favourite programme
3.
1.
4.
5.
DEFG
3.
4.
5.
6.
SWAP
MENU
PR
EXIT
7.
OK
MENU
--
-----
--
-----
--
-----
--
-----
--
-----
EXIT
Press the G button and then F / G button to select On or Off.
Press the D / E button to select
Select a desired programme with the F / G button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
--
-----
.
To store another programme, repeat steps 4 to 5.
You can store up to 5 programmes.
Press the EXIT button to return to normal TV viewing.
Repeatedly press
the SWAP button to select stored favourite pro-
grammes.
VOL
OK
VOL
Calling
the programme table
You can check the programmes stored in the memory
the programme table.
Displaying programme
PR
123
by displaying
table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
456
0C0 35S
78
9
0
6S17
2C12
7S22
3S66
8C09
4S67
LIST/ZOOM
DEFG
Note
a.
b.
69
1BLN03
9C11
OK
MENU
EXIT
:
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
a programme in the programme table
Select a programme with the D / E or F / G button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
Paging through
There
are
a
programme table
10 programme table pages in which contain 100 pro-
grammes.
Pressing the D / E
or
F / G button
repeatedly
Press the LIST button to return to normal TV
14
turns the pages.
viewing.
Picture
PSM
1.
2.
3.
adjustment
(Picture Status Memory)
Picture
PSM
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select PSM.
Press the F / G button to select a picture setting on the PSM
menu.
Dynamic
DRP
On
CSM
Cool
DEFG
OK
MENU
EXIT
Picture
PSM
Dynamic
DRP
On
CSM
Cool
DEFG
4.
OK
MENU
Contrast
90
Brightness
55
Colour
60
Sharpness
50
EXIT
Press the EXIT button to return to normal TV
viewing.
You can also recall a desired picture (Dynamic, Standard, Mild,
Game or User) with PSM button on the remote control. The picture
Dynamic, Standard, Mild and Game are programmed for optimum
picture reproduction at the factory and cannot be changed.
Picture
You
can
ness
1.
2.
3.
MENU
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC AV only) to the levels you prefer.
PR
EXIT
and tint
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select PSM.
Press the OK button and then F / G button to make appropriate adjustments on each sub menu.
VOL
OK
VOL
PR
Picture
PSM
User
DRP
On
CSM
Cool
DEFG
4.
5.
:
DRP
DRP
2.
3.
4.
5.
MENU
EXIT
90
Brightness
55
Colour
60
Sharpness
50
PSM
Stored
You can also select other User items directly with D / E button
and adjust them with F / G button.
Press the OK button to store it for the picture User.
The display Stored will appear.
Press the EXIT button to return to normal TV viewing.
Note
1.
OK
Contrast
Only Contrast
and
Brightness
are
displayed
in PC mode.
(Digital Reality Picture)
improves image
outlines in dark
screens.
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select DRP.
Press F / G button to select On or Off on the DRP menu.
Press the OK button.
Press the EXIT button to return to normal TV viewing.
15
Picture
CSM
Picture
PSM
Dynamic
DRP
On
CSM
Cool
OK
MENU
EXIT
(Colour Status Memory)
You can adjust the
levels you prefer.
temperature of R, G, B (Red, Green, Blue)
to the
2.
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select CSM.
3.
Press the OK button.
1.
DEFG
adjustment
Picture
PSM
User
DRP
On
CSM
Cool
DEFG
4.
Repeat
the 'Picture
OK
MENU
EXIT
You
OK
VOL
42
EXIT
3 to 5.
at
the
programmed
are
factory
and
can
not
for
be
Picture format
can
watch TV in various
picture formats; Wide, 14:9, Zoom,
4:3.
Auto,
VOL
50
Blue
adjustment' steps
optimum picture reproduction
changed.
PR
48
temperature Cool, Normal and Warm
The
MENU
Red
Green
Repeatedly press
the ARC button to select your desired
picture
for-
mat.
Wide
You
can enjoy the cinema (the picture format of 16:9) or general TV
programme through the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full.
PR
14:9
You can
enjoy the picture format of 14:9 or
the 14:9 mode.
The screen 14:9 is viewed just like that the
to the upper / lower and left / right.
general
TV programme
through
screen
4:3 is
magnified
Zoom
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper / lower and left / right sides
so that the screen 16:9 is full. The bottom and top of the picture
may be lost.
Auto
When your set receives the wide screen signal, it will be automatically changed to the picture format to be sent.
4:3
This
ARC
Note
a.
b.
c.
16
picture
format is 4 to 3 of
general
TV.
:
In the double window and scan mode, ARC function isn't available.
You are available to Wide and 4:3 in PC mode.
You are available to Wide, 14:9, Zoom and 4:3 in DVD mode.
Sound
SSM
You
adjustment
(Sound Status Memory)
Sound
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of the equalizer.
can
Speech
SSM
Flat
AVL
Off
Balance
0
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select SSM.
1.
2.
DEFG
Sound
SSM
Flat
AVL
Off
Balance
DEFG
MENU
EXIT
Equalizer
0
OK
MENU
0.1
EXIT
Press the F / G button to select a sound
Sound Frequency Adjustment
a. Press the OK button in SSM.
3.
OK
0.5
1.0
setting
5.0
10 kHz
the SSM
on
menu.
Sound
SSM
User
AVL
Off
Balance
Equalizer
0
MENU
0.1
DE F G
b. Select
a
OK
sound band
MENU
0.5
1.0
5.0
PR
EXIT
10 kHz
Stored
EXIT
by pressing
the F / G button.
VOL
OK
VOL
Make appropriate sound level with the D / E button.
d. Press the OK button to store it for the sound User.
The display Stored will appear.
c.
Press the EXIT button to return to normal TV
You
or
viewing.
also recall a desired sound setting (Flat, Music, Movie,
User) with SSM button on the remote control. The sound
can
Flat, Music,
reproduction
Movie and Speech are programmed for
at the factory and cannot be changed.
Speech
settings
optimum sound
PR
If you press the SSM button after making appropriate adjustthe User sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Flat, Music, Movie or Speech.
Note
ment
:
on
SSM
Sound adjustment
You
can adjust balance, AVL (Auto
cally keeps on an equal volume level
Volume Leveler). AVL automatiif you change programmes.
even
1.
Press the MENU button and then D
Sound menu.
button to select the
2.
Press the G button and then D / E button to select the desired
sound item; AVL or Balance.
/ E
Sound
SSM
Flat
AVL
On
Balance
DEFG
3.
4.
0
OK
MENU
EXIT
Make desired adjustment with the F / G and then press the OK
button.
Press the EXIT button to return to normal TV viewing.
: In PC mode, you
DW2, POP1 mode.
Note
can
select Sound select
menu
in
PIP, DW1,
17
Sound
adjustment
Stereo/Dual
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disap-
pear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
I/II
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
selection for dual language broadcast
programme is received in two languages (dual language), you
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II but-
Language
If
a
can
ton repeatedly.
DUAL I sends the
primary broadcast language to the loudspeakers.
secondary broadcast language to the loud-
DUAL II sends the
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
3.
When NICAM mono is received, you can select NICAM MONO
or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL I,
NICAM DUAL II or NICAM DUAL I+II or MONO. When FM
mono is selected the display MONO appears on the screen.
Sound output selection
In AV mode, you
can
select
output sound for the left and right loud-
speakers.
L+R
:
press the I/II button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
L+L
:
Audio
Repeatedly
R+R
18
:
speaker.
signal
speakers.
Audio signal
speakers.
from audio L
input
is sent to left and
right
loud-
from audio R
input
is sent to left and
right
loud-
Other functions
TV, AV,
DVD and PC modes
Special
TV
Input
be set for TV, AV, DVD or RGB-PC mode. AV mode is
used when a video cassette recorder (VCR), or other equipment is
connected to the set.
Inputs
can
Note : When a VCR is connected via the aerial socket the set is
used in TV mode. See the 'Connection of external equipment' section.
1.
Auto
Off
Off
sleep
English
Language
DEFG
OK
MENU
EXIT
Press the MENU button and then D / E button to select the
Special
2.
3.
Child lock
menu.
Press the G button and then D / E button to select Input.
Press the F / G button to select TV, AV1, AV2, S-Video, DVD
or RGB-PC.
Special
TV
Input
Child lock
Auto
Off
Off
sleep
English
Language
MENU
DEFG
4.
OK
MENU
you can select the TV, AV, DVD
TV/AV button.
or
VOL
OK
VOL
PC
RGB-PC mode
In AV or RGB-PC mode, to return to TV mode, press the D / E
NUMBER buttons.
Auto AV
EXIT
EXIT
The AV, DVD and RGB-PC modes are :
AV 1 : VCR connected to the Euro scart socket of the set
AV 2 : VCR connected to the AV2 of the set
S-Video : VCR connected to the S-Video of the set
DVD : DVD mode
RGB-PC : PERSONAL COMPUTER connected to the
socket of the set
Press the EXIT button to return to normal TV viewing.
Alternatively
pressing the
PR
PR
123
by
456
78
or
9
0
switching
If your VCR outputs an AV switching voltage when connected to the
Euro scart socket, the set will switch to AV1 mode automatically. But
if you want to keep on watching TV mode, press the D / E or NUMBER buttons.
Press the TV/AV button to return to AV modes.
19
Other functions
Child lock
Special
TV
Input
Child lock
Auto
Off
Off
sleep
English
Language
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized view-
ing.
1.
DEFG
OK
MENU
EXIT
Press the MENU button and then D / E button to select the
Special
2.
3.
menu.
Press the G button and then D / E button to select Child lock.
Press the F / G button to select On or Off on the Child lock
menu.
4.
Press the EXIT button to return to normal TV
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the side panel is pressed while viewing the TV.
Note : The display Child lock on will not appear on the screen if
any button on the side panel is pressed while displaying the menus.
Auto
MENU
PR
EXIT
sleep
If you select On on the Auto sleep menu, the set will automaticalswitch itself to standby mode approximately ten minutes after a
TV station stops broadcasting.
ly
VOL
OK
1.
VOL
2.
3.
4.
PR
Press the MENU button and then D / E button to select the
Special
menu.
Press the G button and then D / E button to select Auto sleep.
Press the F / G to select On or Off on the Auto sleep menu.
Press the EXIT button to return to normal TV viewing.
Sleep
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time has elapsed.
Press the SLEEP button to select the number of minutes. The diszz ---'
will appear on the screen, followed by 10, 20, 30, 60,
play
90, 120, 180 and 240. The timer begins to count down from the
number of minutes selected.
'
Note :
a.
To view the
remaining sleep time,
press the SLEEP button
once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
zz---'
until the display
appears.
When you switch the set off, the set releases the preset sleep
time.
'
c.
SLEEP
20
PIP
Option
PIP is
operation (option)
:
an
optional function,
so
that
only the
set with PIP function
can
operate.
PIP
(Picture
in
Picture) displays
Select TV, AV, DVD
or
picture
a
PC mode to
within
picture.
a
operate PIP function.
On and off
Press the PIP button to switch
Each time this button is
displayed
as
PIP
on
pressed,
the sub
picture.
each mode for the sub
picture
is
shown below.
PIP
DW2
DW1
POP1
(PC
mode
Off
only)
PR-
SWAP
PR+
INPUT
Press EXIT button to switch it off.
EXIT
Input
mode selection for sub
Press the INPUT button to select the
Each time this button is
ture is
displayed
Programme
Swapping
as
pressed,
picture (PC
input
each
mode for the sub
input
only)
picture.
mode for the sub
VOL
VOL
pic-
shown below.
number
AV1
AV2
between main and sub
Press the SWAP button to
Programme
mode
exchange
S-Video
pictures
the main and sub
selection for sub
DVD
pictures.
picture
Press the PR +/- buttons to select a programme for the sub picture.
The selected programme number is displayed just below the programme number of main picture.
Sub
picture
size
SIZE
Press the SIZE button and then press the F / G button until desired
size is achieved. The SIZE button doesn't work in DW1, DW2 and
STILL
POP1 mode.
Sub
picture
freeze
(option)
Press the STILL button to freeze motion of the sub
Press any button to restore motion.
picture.
21
PIP
operation (option)
Sub
picture position change
Press the POSITION button and then press the D / E or F / G butuntil desired position is achieved. The sub pictures moves
ton
up/down
or
left/right.
The POSITION button doesn't work in DW1,
DW2 and POP1 mode.
Programme
scan
(option)
This function enables you to search all the stored stations
pictures and 9 main pictures and see your favourite station
ing
the main and sub
on
3/12 sub
by exchang-
pictures.
Press the SCAN button
The selected sub
PR
EXIT
VOL
picture
PC
22
RF
(TV)
PIP
RF
(TV)
POP3
POP12
RF (TV)
RF (TV)
channel scan channel scan
POP9
POP1
PC
strobe
(TV)
RF
AV
AV
AV
strobe
AV
strobe
PC
strobe
AV
PC
DVD
DVD
DVD
strobe
DVD
strobe
PC
strobe
DVD
PC
PC
PC
strobe
PC
strobe
RF (TV)
channel scan
x
AV
PC
PC
PC
strobe
PC
strobe
AV
strobe
x
DVD
PC
PC
PC
strobe
PC
strobe
DVD
strobe
Note
SCAN
PIP
PIP mode
PC
RF
POSITION
Specification>
Condition
Main
PR
repeatedly to select POP3/POP12/POP9.
pictures search all the stored stations.
to switch off sub or main pictures.
main
Press the EXIT button
<PIP/POP
VOL
or
(TV)
:
x
The PIP picture resolution will be decreased by the PIP size.
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
TEXT
Switch on/off
Press the TEXT button to switch to teletext. The initial page or last
page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT or EXIT button to switch off teletext. The previous
mode reappears.
PR
EXIT
OK
SIMPLE text
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or fol-
Page
1.
2.
lowing
PR
123
456
78
9
page.
0
Programming colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the
M button to switch to LIST mode.
a
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
Press
a
2.
Using
the NUMBER buttons, select the page you wish to pro-
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number by blinking once. From now on, you can
1.
4.
coloured button.
M
select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
Note : In PIP of the PC mode, select the sub picture size is PIP,
DW1, DW2, POP1.
In PIP of the PC mode, the text on the screen may be unstable.
23
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
PR
TOP mode.
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
PR
selection
i button to select the index page.
Press the
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or fol-
Page
123
1.
2.
456
78
9
3.
0
4.
lowing
24
page.
Teletext
Special
?
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
PR
UPDATE
Displays
the TV
picture on
the
screen
while
waiting
for the
new
teletext page. The display
will appear at the top left hand
corner of the screen. When the updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
PR
HOLD
Stops
the automatic page
text page consists of 2
change
which will
occur
if
a
tele-
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
stop symbol
is
123
or more
displayed
at the
top
left-hand
corner
of the
456
78
9
0
and the automatic page change is inhibited.
To continue press this button again.
screen
MIX
Displays
the teletext pages superimposed on the TV
picture off press this button again.
picture.
To switch the TV
?
TIME
When
viewing
the time at the
button
again
TV programme, press this button to display
top right hand corner of the screen. Press this
a
to
remove
the
display.
In the teletext mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED/GREEN, D / E
NUMBER buttons.
change
Press
again
or
to exit this function.
25
Connection of external
You
connect additional
can
etc. to your set.
Examples
equipment
such
equipment,
are
as
VCRs, camcorders
shown below.
Aerial socket
1.
Connect the RF out socket of the VCR to the aerial socket of
the set.
2.
Connect the aerial cable to the RF aerial in socket of the VCR.
3.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
4.
VCR
stored.
5.
Press the PLAY button
on
the VCR.
Euro scart socket
1.
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
2.
Press the PLAY button
on
the VCR.
If your VCR outputs an AV switching signal via the Scart lead the
set will auto switch to AV 1 mode on start of playback, but if you
want to
keep
on
watching
in TV mode, press the D / E
or
NUM-
BER buttons.
VCR
Otherwise press the TV/AV button
set to select AV1. The VCR
on
the remote control hand-
playback picture
appears
on
the
screen.
You
can
also record programmes received
by
the TV
on
video
tape.
AV2
S-VIDEO
VIDEOL/MNAU
Audio/Video in sockets
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
2.
Press the TV/AV button to select AV2.
R
3.
S-VIDEO VCR
Press the PLAY button
The VCR
on
playback picture
the VCR.
appears
on
the
screen.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
26
Connection of external
S-Video/Audio in sockets
equipment
(S-Video) (option)
AV2
When
connecting
picture quality will
1.
an
S-VIDEO VCR to the S-VIDEO socket, the
be further
improved.
Connect the S-Video socket of the VCR to the S-VIDEO sock-
S-VIDEO
VIDEOL/MNAU
R
et of the set.
2.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
3.
Select S-Video
4.
Press the PLAY button
The VCR
can
listen
on
playback picture
Headphone
Insert the
by pressing
the TV/AV button
repeatedly.
the VCR.
appears
on
the
screen.
socket
headphone plug to the headphone socket of the set. You
to the sound through the headphone. To adjust the head-
press the F / G button. If you press the MUTE button, the sound from the headphone is switched off.
phone volume,
S-VIDEO VCR
AV2
S-VIDEO
VIDEOL/MNAU
R
27
Connection of PC
PC in socket
1.
2.
3.
4.
PERSONAL COMPUTER
(D-Sub jack)
Connect the signal cable from the monitor output socket of the
PERSONAL COMPUTER to the PC input socket of the set.
Connect the audio cable from the PC to the PC SOUND sockets of the set.
Press the TV/AV or MULTIMEDIA button to select PC.
Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
Note
block
:
If you have
Apple macintosh, connect the VGA desktop
from the 3 row 15 pin to 2 row 15 pin with the
cable and connect the VGA desktop block to the Macintosh.
an
(not supplied)
signal
Displayable
MODE
Monitor
Specification
Resolution
Horizontal
Frequency(KHz)
VGA
SVGA
(MAC)
XGA
WXGA
Vertical
Frequency(Hz)
640x480
31.4KHz
60Hz
640x480
35KHz
67Hz
640x480
37.5KHz
75Hz
640x480
43.2KHz
85Hz
800x600
35.1KHz
56Hz
800x600
37.8KHz
60Hz
800x600
48KHz
72Hz
800x600
46.8KHz
75Hz
800x600
53.6KHz
85Hz
832x624
49.7KHz
75Hz
1024x768
48.3KHz
60Hz
1024x768
56.4KHz
70Hz
1024x768
60KHz
75Hz
1024x768
68.6KHz
85Hz
1280x768
39.5KHz
50Hz
1280x768
47.6KHz
60Hz
(Synchronization input
form
:
separate)
Note :
a.
If the set is cold, there may be a small "flicker" when the set is
switched on. This is normal, there is nothing wrong with the set.
b. If possible, use the VESA 1,024x768@60Hz video mode to
obtain the best image quality for your LCD monitor. If used under
the other resolutions, some scaled or processed pictures may
appear on the screen. If used to PC vertical frequency 85Hz,
some noise can be seen when PIP is on. In this case, set the PC
vertical frequency to 60Hz. The set has been pre-adjusted to the
mode VESA 1,024x768@60Hz.
c.
Some dot defects may appear on the screen, like Red, Green or
Blue spots. However, this will have no impact or effect on the
monitor performance.
d. Do not press the LCD screen with your finger for a long time as
this may produce some temporary distortion effects on the
screen.
e.
When the PC screen appears on the set, a message may appear
the screen, and the message will differ according to the
Window system version (Win98, 2000). If a message appears
click "Next" until the message finishes.
If the message "out of Range" appears on the screen, adjust
the PC as in the 'Displayable Monitor Specification' section.
on
f.
DPM (Display Power Management) mode
When the PC is in the power saving mode, automatically the
itor goes into DPM mode to save the energy.
Note : Use the supplied
mode may not work.
28
signal
mon-
cable with the set. Otherwise, DPM
Connection of PC
Menu selection
1.
2.
3.
Press the MENU button and then D / E button to display each menu.
Press the G button and then D / E button to select a menu
item.
Change the setting of an item in the sub menu or the pull-down
menuwithF/G.
You
can move
ton and to
to the
move
higher
level
menu
to the lower level
button.
by pressing the OK butby pressing the MENU
menu
Note :
a.
See 'Picture adjustment' section to adjust the picture.
b. See 'Sound adjustment' section to adjust the sound.
c.
See 'TV, AV, DVD and PC modes' section to select TV, AV1,
AV2, S-Video, DVD or RGB-PC.
MENU
VOL
Sound
Picture
Dynamic
SSM
Flat
DRP
On
AVL
Off
CSM
Cool
Balance
EXIT
DEFG
PSM
PR
OK
EXIT
VOL
0
PR
DEFG
OK
MENU
Picture
OK
MENU
Sound
menu
EXIT
menu
PC programme
Special
RGB-PC Menu
H-Position
50
Input
V-Position
50
Child lock
Clock
50
Auto
Phase
10
Language
RGB-PC
Off
Off
sleep
English
Auto-configure
DEFG
OK
MENU
RGB-PC
EXIT
menu
DEFG
OK
MENU
Special
EXIT
menu
29
Connection of PC
PC
RGB-PC Menu
H-Position
50
V-Position
50
Clock
50
Phase
10
Auto-configure
You
can adjust horizontal/vertical position, clock, phase,
configure as you prefer.
1.
DEFG
OK
MENU
Setup
EXIT
2.
and auto-
Press the MENU button and then D / E button to select the
RGB-PC menu.
Press the OK
desired
or
picture
G button and then D / E button to select the
item.
RGB-PC Menu
H-Position
50
V-Position
50
Clock
50
Phase
10
Auto-configure
DEFG
3.
MENU
PR
Press the F / G button to make
H-Position / V-Position
This function is to adjust
EXIT
OK
picture
MENU
EXIT
appropriate adjustments.
to
left/right
and
up/down
as
you
prefer.
VOL
OK
Clock
VOL
This function is to minimize any vertical bars or stripes visible on
the screen background. And the horizontal screen size will also
change.
Phase
This function allows you to remove any horizontal noise and
clear or sharpen the image of characters.
PR
Auto-configure
This function is for the automatic
adjustment
of the
screen
posi-
tion, clock and phase. The displayed image will disappear for
few seconds while the Auto-configuration is in progress.
a
Note : Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor's position, clock and phase manually.
30
4.
Press the OK button to store it for the PC monitor
5.
Press the EXIT button to return to PC mode.
picture.
DVD
Notes
on
Operation
discs
On
?
?
handling discs
Do not touch the playback side of the disc.
Do not attach paper
or
tape
to discs.
On
?
storing discs
Do not store discs in
heat
?
Do not store discs in
bathroom
or near a
Store discs
vertically
a
?
a
place subject
to direct
sunlight
or near
sources.
discs outside of their
place subject
to moisture and dust such
as
humidifier.
in
a
case
case.
may
Stacking or placing object
warping.
on
cause
On
?
?
cleaning discs
Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the center outward with a soft cloth.
Always keep the disc clean.
Do not
any type of solvent such as thinner, benzine, comor antistatic spray for vinyl LPs. It
use
mercially available cleaners
may damage the disc.
"
"
Note:"
may appear on the TV screen during operation. A
means that the operation is not permitted by the unit or the disc.
"
Structure of disc contents
DVD video disc
disc
??????
Title
??
??
CAUTION: The apparatus should not be
Chapter
exposed to water (dripping or splashing)
and no objects filled with liquids, such as
vases, should be placed on the apparatus.
Video CD/Audio CD
Regional code of the DVD
player and DVDs
This DVD player is designed
and manufactured for playback of region "2" encoded
DVD software. The region code
disc
??????
Track
??
??
Index
?
?
?
Title :When two or more movies are recorded on a disc, the disc
is divided into two or more sections. Each section is called a
"TITLE".
Chapter : The titles can be subdivided into many sections. Each
section is called a "CHAPTER".
Track : An audio CD can contain several items. These are
assigned to the tracks.
Note
:
If
an
MP3
or
JPEG file CD is created
using
an
incorrect
method, the player may not be able to recognize it. If this happens,
try reburning another CD after setting up the disc writing parameters
correctly
on
your PC.
CAUTION:
This Digital Video
Disc Player employs
a Laser System.
To
ensure
proper
use
of this product, please read this
owner's manual carefully and retain for
future reference should the unit require
maintenance, contact an authorized service location (see service procedure).
Use of controls, adjustments, or the performance of procedures other than those
specified herein may result in hazardous
radiation exposure.
To prevent direct exposure to laser beam,
do not try to open the enclosure. Visible
laser radiation when open. DO NOT
STARE INTO BEAM.
on the
labels of some DVD discs indicates which
type of player can play those discs. This
unit can play only DVD discs labeled "2".
If you try to play any other discs, the message "Check Regional Code" will appear
on the TV screen. Some DVD discs may
not have a region code label even though
their playback is prohibited by area limits.
"DTS" and
"DTS
trademarks of
Digital Surround"
Digital Theater System,
are
Inc.
APPARATUS CLAIMS OF U.S. PATENT
NOS. 4,631,603,4,577,216,4,819,098,
AND 4,907,093 LICENSED FOR LIMITED VIEWING USER ONLY.
31
DVD
Operation
Playing
a
disc
Basic playback
1.
Press the POWER button to switch the set on.
2.
Insert the disc into the side DVD slot after facing
side to front. Playback starts.
POWER
a
logo-printed
To pause playback (still mode)
1.
Press the PLAY/PAUSE G/II button during playback.
2.
Press the PLAY/PAUSE G/II button again to return to normal
OPEN/CLOSE
playback.
To stop playback
Press the STOP button to stop
PR
VOL
OK
VOL
playback.
Note :
a.
To stop playback fully, press the STOP button in twice.
b. In TV, AV or RGB-PC mode, to return to DVD mode, press the
PLAY/PAUSE G/II button.
c.
In DVD mode, to return to TV mode, press the SWAP button.
d.
When you use a NTSC disc, the picture may be unstable. In
that case, press the REPEAT button on the side panel to select
NTSC broadcasting system for a moment after extracting the
disc.
To remove the disc
Press the OPEN/CLOSE button and
PR
remove
the disc after the disc
completely ejected.
SKIP
SCAN
PLAY/PAUSE /II
STOP
SKIP
Playing in fast reverse or fast forward directions (for DVD,
Video CD and Audio CD)
1.
Press the SCAN GG or FF SCAN button during playback.
2.
Each time you press SCAN GG or FF SCAN button, the playback speed changes.
3.
Press the PLAY/PAUSE G/II button to resume normal playback.
SCAN
Playing in slow reverse or slow forward directions (for DVD
and Video CD)
1.
Press the PLAY/PAUSE G/II button and then press SCAN GG
or FF SCAN button.
2.
Each time you press SCAN GG or FF SCAN button, the playback speed changes.
Note : There is no sound when
in DVD and Video CD.
Locating
a
chapter
or
viewing
or
SLOW
playback
track
Press the SKIP GGI button Forward
during playback
FAST
to locate
Each time you press the
or
IFF SKIP button Reverse
chapter that you want to watch.
button, a chapter or track is skipped.
a
Note :
a.
If you press the SKIP GGI button Forward or IFF SKIP button
Reverse in the still mode, one frame is displayed at a time.
b. Depending on the disc, this function maybe operate differently.
32
DVD
Operation
OSD (On-screen Display)
You can display the playback status on TV screen as following;
Title, Chapter number, Playing time. Press the OK button during
playback. Title, Chapter information appears on screen.
Each time you press the OK button, the OSD changes as follows.
Title Elapsed -> Title Remain -> Chapter Elapsed ->
Chapter Remain -> Display off
VCD : Single Elapsed -> Single Remain -> Total Elapsed
-> Total Remain -> Display off
Audio CD : Single Elapsed -> Single Remain ->
Total Elapsed -> Total Remain
DVD
:
Playing
MP3 discs
a MP3 disc
MP3 menu screen is displayed automatically depending
MP3 disc's folder (directory) structure as shown below.
Using the D / E or F / G button to find the desired folder.
Load
1.
2.
02:30
03:37
001 / 011
128K
on
PR
G
/
MP3
O.S.T.
-
D
1
PICTURE 2
PICTURE 1
MP3
O.S.T.
-
VOL
OK
VOL
3
PICTURE 3
MP3
O.S.T.
-
4
Resolution
3.
4.
E
500
x
375
Press the OK button to select.
the D / E button to find the desired MP3 title.
Press the OK button to select.
PR
Using
Playing JPEG
file
When a JPEG file is loaded, the table of contents is displayed on
TV screen. 16 slide show transition modes are provided. Use PROGRAM button to switch the slide show transition mode.
Transition modes
ZOOM
Wipe Top -> Wipe Bottom -> Wipe Left -> Wipe Right
-> Diagonal Wipe Left Top -> Diagonal Wipe Right Top ->
Diagonal Wipe Left Bottom -> Diagonal Wipe Right Bottom
-> Extend From Center V ->
To Center H -> Compress To Center V
-> Window H -> Window V -> Wipe From Edge To Center
Move in From Top -> None
->
Extend From Center H
PLAY/PAUSE /II
STOP
Compress
Select the
->
picture
the picture, you want to see, by pressing the D / E button. The selected item shows as small size picture on the right side
of File Menu Screen. Press the OK or PLAY/PAUSE G/II button to
display the picture on the full screen. Press the PLAY/PAUSE G/II
button to start slide show.
Selecting
: If you press the OK or PLAY/PAUSE G/II button while
MP3 disc, the picture starts slide show.
Note
ing
Image
rotation and
play-
zoom
There are 2 modes to rotate a picture
D button : invert / E button : mirror
:
Press the ZOOM button and viewing zoom mode in 50%
200%,
by pressing the SCAN GG or FF SCAN button. Adjust the picture
position with the D / E or F / G buttons in enlarged picture mode.
To finish ZOOM mode, press the ZOOM button one more time.
~
To finish
viewing picture, press
the STOP button.
33
DVD
Operation
Selecting
disc
menu
1.
Press the DISC MENU button
2.
Press the D / E, F / G, OK
desired item.
Selecting
1.
2.
title
during playback.
or
NUMBER buttons to select the
menu
Press the TITLE MENU button during playback.
Press the D / E, F / G, OK or NUMBER buttons to select the
desired item.
Note
PR
OK
In
some
disks, you can't select the disc
VOL
can
play
a
specific title, chapter,
Press the REPEAT button
track
or
DVD
PR
MP3
456
:
Chapter
Title
->
:
Random
->
ALL
Track
->
Repeat Directory
->
->
the disc,
Note
ble.
:
A-B
repeat playback
Depending
->
repeat mode changes
Repeat Off
->
Repeat Off
Repeat Track ->
Off
on
repeat playback may
repeat playback allows you
selected
to
not be
possi-
repeat material between
two
points.
A-B
1.
2.
3.
Press the A-B button to select the start
point during playback.
again to select the end point.
Playback starts at the point that you selected. Playback stops
at the end point, returns to Point A automatically, then starts
again.
Repeatedly press the A-B button again to resume normal playPress the A-B button
back.
"Off" appears
34
segment repeatedly.
9
A-B
REPEAT
menu.
VCD : Track -> ALL -> Repeat Off
Audio CD : Track -> ALL -> Random
123
0
title
during playback.
Each time you press the REPEAT button, the
as follows.
78
or
Repeat playback
You
VOL
:
on
the
screen.
DVD
Operation
Programme playback
You
1.
can
arrange the order of tracks
on
the disc.
Press the PROGRAM button in the
stop mode
or
during play-
back.
2.
3.
Press the D / E button to select the programme position.
Press the NUMBER buttons to input the desired Title or Track
numbers.
Track
06/06
Programme
00:03
:
Track
(01
-
06)
01
06
02
07
03
08
04
09
05
10
Exit
4.
Note
Depending
possible.
:
the
Selecting
If your
2.
the
the disc, programme
on
camera
PR
playback.
playback
may not be
VOL
camera
scene was
change
1.
Right
To programme others, repeat Step 2 to 3.
Press the PROGRAM button to resume normal
of the
multiple angles, you can easily
you are watching.
scene
Press the ANGLE button during playback.
Repeatedly press the ANGLE button to select the desired
angle.
Note :
a.
You
b.
c.
can
VOL
angle
recorded from
angle
OK
PR
123
456
only change
angles of scenes.
The angle function
the
angle
for DVDs that
provide multiple
78
9
0
will not work
on
DVD video discs that do not
3D SOUND
contains recorded multiple angles.
The number of angles varies from disc to disc.
3D sound
To enjoy various surround sounds, when you can select any
desired sound effect by pressing the 3D SOUND button.
1.
Press the 3D SOUND button
2.
Each press of the 3D SOUND button
play as shown below.
during playback.
changes
ANGLE
the sound dis-
Reverb
Off
Concert
Arena
Bathroom
Living
Room
Hall
35
DVD
Operation
Picture size
zoom
When enlarging or
unnatural picture.
1.
2.
3.
AUDIO
SUB-T
PR
reducing
the
picture,
the
CD)
screen
may be
display
Press the ZOOM button in the stop mode or during playback.
Each press of the ZOOM button changes the screen display as
shown below.
2x->3x->4x->1/2->1/3->1/4
with the D / E / F / G buttons
Adjust the main picture position
in enlarged picture mode.
Selecting
a
audio
language (STOP
mode
only)
Set this value to the preferred audio language. If an audio language
is selected, whenever you start playing a new disc, the selected
audio language is played. (If the selected language is contained in
the
MENU
DVD and Video
(for
disc.)
1.
Press the MENU button in twice and then
2.
to select Audio Language.
Press the G button and then D / E button to select your desired
use
the D / E button
language.
VOL
OK
VOL
Audio
Language
Language
G
Menu
English
Language
French
German
Level
Rating
Spanish
New Password
Italian
Chinese
Polski
TV Screen
OSD
PR
Original
Korean
Subtitle
Language
Japanese
Digital Output
Special
123
456
78
0
9
DE:Move
3.
4.
G:Next
Press the OK button.
Press the MENU button to
resume
You can also select a desired audio
on the remote control.
normal
playback.
with AUDIO button
language
ZOOM
Selecting
a
subtitle
mode
language (STOP
only)
Set this value to the preferred subtitle language. If a subtitle language is selected, whenever you start playing a new disc, the
selected subtitle language is played. (If the selected language is
contained in the disc.)
1.
Press the MENU button in twice and then
to select Subtitle
2.
use
the D / E button
Language.
Press the G button and then D / E button to select your desired
language.
Audio
Language
Language
Original
Subtitle
Menu
G
Rating
French
German
Level
Spanish
New Password
Italian
Chinese
Polski
TV Screen
OSD
Language
Japanese
Digital Output
Off
Special
DE:Move
3.
4.
Press the OK button.
Press the MENU button to
G:Next
resume
You can also select a desired subtitle
on the remote control.
36
Korean
English
Language
normal
playback.
language
with SUB-T button
DVD
Disc
You
(If
1.
menu
can
selection
language
select the
language of the disc menu messages
language is contained in the disc.)
the selected
Press the MENU button in twice and then
to select Menu
2.
Operation
use
of DVDs.
the D / E button
Language.
Press the G button and then D / E button to select your desired
language.
Audio
Language
Original
Korean
Subtitle
Language
Language
Menu
G
Spanish
New Password
Italian
Chinese
Polski
TV Screen
OSD
English
French
German
Level
Rating
Language
Japanese
Digital Output
Special
MENU
DE:Move
3.
Press the OK button.
The
4.
displays
menu on screen
guage.
Press the MENU button to
Parental control
Some discs
be
PR
G:Next
are
will appear in the selected lan-
resume
normal
VOL
OK
VOL
playback.
setting
PR
specified not suitable for
play back with the set.
children. Such discs
can
123
from
prevented
456
1.
Press the MENU button in twice and then
to select Rating Level.
2.
Press the G button and then
use
use
the D / E button
NUMBER buttons to
input
a
4-
78
9
0
digit password.
Audio
Language
Subtitle
Menu
Language
Language
Rating
Level
G
7NC-17
TV Screen
5PG-R
4PG-13
3PG
2G
1 Kids
0 Unlock
OSD
6R
Language
Digital Output
Special
DE:Move
Be
3.
G:Next
to remember this number!
sure
If you input a wrong number, press the EXIT button.
Press the D / E button to select from the level 0 to level 8. The
limitation will be
4.
8 Adult
New Password
more severe as
Level 0
:
The
Level 1
:
DVD software for adults cannot be
Level 8
:
All DVD software
parental
control
the level number is upper.
Press the MENU button to
Note
:
If you
forgot
your
setting
can
be
played
resume
password,
does not function.
played
back.
back.
normal
playback.
press '7', '7', '7', '7'
on
the
remote control handset.
37
DVD
To
1.
Operation
change
the
password
Press the MENU button in twice and then
Rating Level.
Press the G button and then
use
the D / E button
to select
2.
use
NUMBER buttons to
input
a
4-
digit password.
3.
Press the F button and then
use
the D / E
button to select
New Password.
Audio
Language
Subtitle
Menu
Language
Language
Level
Rating
New Password
----
G
TV Screen
OSD
Language
Digital Output
Special
MENU
DE:Move
PR
4.
5.
VOL
OK
VOL
Press the G button and then enter your
Re-enter new password for confirm.
Password
6.
G:Next
change
new
password
in 4
digits.
is finished.
Press the MENU button to
resume
normal
playback.
TV Screen
PR
You
can
watch TV in various
picture
formats.
123
1.
456
78
Press the MENU button in twice and then
use
the D / E button
to select TV Screen.
9
Audio
Language
Subtitle
0
Menu
Language
Language
Rating
Level
New Password
TV Screen
OSD
G
4:3LB
4:3PS
Language
16:9Wide
Digital Output
Special
DE:Move
2.
PresstheGbuttonandthenD/Ebuttontoselect4:3LB,
4:3PS,or16:9Wide.
Letter Box
3.
4.
(4:3 LB)
Pan & Scan
Press the OK button.
Press the MENU button to
Note
sible.
38
G:Next
:
Depending
on
(4:3 PS)
resume
the disc, TV
normal
screen
16:9 Wide
playback.
function may not be pos-
DVD
Disc OSD
selection
language
Operation
(option)
The
menu can be displayed on the screen in your desired language. First select your language. (If the selected language is contained in the disc.)
1.
Press the MENU button in twice and then
to select OSD
2.
use
the D / E button
Language.
Press the G button and then D / E button to select your desired
language.
All the
3.
on screen
Note
:
On
some
audio
language.
not be
displayed.
output
Press the MENU button in twice and then
to select
2.
will appear in the selected
resume normal playback.
models, the OSD Language will
Selecting digital
1.
displays
Press the MENU button to
use
the D / E button
MENU
PR
Digital Output.
Press the G button and then D / E button to select OFF, RAW
PCM.
or
VOL
Audio
Subtitle
Menu
OK
VOL
Language
Language
Language
Rating
Level
New Password
TV Screen
OSD
PR
Language
Digital Output
Special
DE:Move
G
OFF
RAW
G:Next
123
PCM
456
3.
4.
Press the OK button.
Press the MENU button to
78
resume
normal
9
playback.
0
DRC
(Dynamic Range Compression)
DRC
(Dynamic Range compression) enables you to
dynamic range so as to achieve a suitable sound for
control the
your
equip-
ment.
1.
Press the MENU button in twice and then
to select
2.
use
the D / E button
Special.
Press the G button and then D / E button to select DRC Off
DRC On.
Audio
Language
Subtitle
Menu
or
Language
Language
Rating
Level
New Password
TV Screen
OSD
Language
Digital Output
Special G
DE:Move
4.
5.
Press the OK button.
Press the MENU button to
G:Next
resume
DRC Off
DRC On
normal
playback.
39
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Incorrect
position
Vertical bars
or
stripes
on
background
Horizontal noise
Signal
Cable message appears
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
Auto-configure
or
adjust
(VCR only)
the H/V
Auto-configure
or
adjust
Clock
Auto-configure
or
adjust
Phase
Is the
Signal
Cable connected
position
or
loose