LG WF-T652 Owner’s Manual

M
K
Washing
Machine
OWNER'S MANUAL
MODEL
:
WF-T652
Please read this manual
washing
carefully
before
operating your
machine and retain it for future reference.
P/No.: 3828EA3003U
M
K
FEATURES
.........................................................................................
3
IMPORTANT SAFETY PRECAUTION................................................ 4
MACHINE PARTS............................................................................... 5
INSTALLATION
...................................................................................
6
AUTOMATIC AND MANUAL PROGRAMMING...................................8
NORMAL WASH PROGRAM.............................................................10
SPEEDY/HEAVY WASH PROGRAM
WOOL/SOAK WASH PROGRAM
...............................................
.....................................................
12
14
31P・´ "Ø`
DELAY START WASHING PROGRAM
SELECTABLE WASHING METHODS
WASHING PROCEDURE
............................................
..............................................
.................................................................
LOAD SIZE AND DETERGENT
........................................................
HOW TO USE FABRIC SOFTENER AND BLEACH
CHILD LOCK / WASH OPTION
MAINTENANCE
........................
........................................................
................................................................................
16
18
20
21
22
23
24
TROUBLE-SHOOTING GUIDE......................................................... 26
SPECIFICATIONS
............................................................................
27
WARRANTY CARD........................................................................... 28
2
P/No.3828EA3003U
P/No.3828EA3003U
MEMO
FEATURES
CAUTION
"Turbo Drum" washer doesn't operate while the lid is open. It the lid is
during the wash, rinse and spin cycles, the operation stops for safety.
Fuzzy logic
A load
set
sensor
&
a
control
micro processor in the controller detect
optimum washing
conditions such
as
technology in
electronic control system provides
the best washing performance.
water
The most advanced
Turbo drum
The
turn
rent
opened
START
laundry
load and
level, wash time etc.
SENSING
SETTING
Laundry Sensor
Optimum
Washing
Water Level Sensor
Condition
WASHING
AUTO
POWER
OFF
washing
"punch + 3" washing wings and the washing
in opposite directions. This makes the water
flow in two directions which improve.
tub
cur-
The wash
performance is also improved by the water
which continually cascades into the wash bowl from
small waterfalls in the washing tub.
Innovated washing wings
Three small
washing wings generate strong and
sharp washing currents to clean laundry uniformly.
Adjusted vertical movement and rotating direction
of the washing punch reduces laundry entanglement and improves washing power.
Device for removing lint
Lint filter catches lint and thread
washing
30
P/No.3828EA3003U
to make the
laundry
generated during
cleaner.
3
P/No.3828EA3003U
Never touch the clothes in the bowl
operation
or
Even when
until the bowl
during
stops rotating.
rotating slowly, the clothes
fingers, which is
may wrap around your
dangerous.
Don't
put kerosene, gasoline, benzine,
thinner
or
clothes
containing
these chemi-
cals into the washer.
An
explosion might
result.
The
appliance
is not intended for
young children
or
use
by
infirm persons without
supervision.
Young children should be supervised
to ensure that they do not play with the
appliance.
Don't put hand(s) under the washer
during operation.
Rotating parts may injure your hand(s).
Keep washer away from 4fire(a heater,
burning cigarette, etc.).
After
The washer may be deformed
may break out.
Turn the POWER button "OFF" at the
or a
fire
washing
Close the water
tap.
wall power outlet, if you will not be using
the machine for a long period of time.
To
prevent
water
leakage, fire,
electric
shocks,
OFF
OFF
etc.
OFF
Don't rest
heavy objects
apply
on or
pressure to the lid.
Don't bend the lid forcibly,
as
it may
break.
exposed
Switch and/or
Plastic
panel damage
or a
mal-
function may result.
Don't use excessively
(above 70°C)
Plastic
Don't press the switches and/or the panel
a sharp object, i.e mechanical pencil.
with
hot water.
parts of the washer may be
deformed
or
damaged.
spin-dry starched clothes.
spined by mistake, operate the washer
without load with only half the normal
amount of detergent.
Don't install the washer where it would be
to direct
sunlight.
parts and the painted cabinet may
be deformed and/or fade.
Don't
Don't
If
The rubber
use
strong alkaline detergents.
parts may be damaged.
Otherwise, starch
adhering
to the
bowl may soil
other clothes.
4
P/No.3828EA3003U
29
P/No.3828EA3003U
MACHINE PARTS
Powder
detergent
delayed
washing/ softener
HOT WATER SUPPLY
HOSE
box for
box
COLD WATER SUPPLY
HOSE
Make sure the water
does not leak.
GUARANTEE
INLET HOLE FOR
2 YEARS ON COMPONENTS
BLEACH
LINT FILTER
10 YEARS STAINLESS
Clean
regularly
linting
on
to
stop
the clothes
load.
STEEL BOWL
FUNCTION SELECTOR
DRAIN HOSE
START/PAUSE
BUTTON
Use to start or stop the
THE LG EXPRESS GUARANTEE
This
specifically covers replacement and repair of any defective componentry
period specified in the LG Guarantee medallion above.
washing
porarily.
or
faults in manufacture
any
reason
beyond
no
liability
where any
goods
fail to
comply
machine tem-
WASHING WINGS
Vertical movement of
for the
However, LG accepts
Check if the drain hose
is located in the laundry
tub before operating the
washing machine.
with this express guarantee because of
LG's control.
POWER PLUG
washing punch can be
operated when a sufficient
amount of laundry is deposited.
If the supply cord is
damaged, it must be
replaced by the manufacturer
Set the proper water level,
excessive amount of
water may increase
entanglement of laundry.
or
an
replaced by LG at no cost to the owner. Similarly all work shop labour costs
needed to restore the goods to their original working condition will be met by LG during the guarantee
period. This applies to work done in any approved LG Service Centre and specifically excludes travel
time, freight if the product is outside the LG Service Centres normal service area.
Faulty components
will be
The conditions of this
Express guarantee only apply
if
repairs
are
carried out
by
an
approved
LG
Service Centre in New Zealand.
This guarantee is not transferable except
as
provided by
the
Guarantee Act 1993.
consumer
EXPRESS GUARANTEE SERVICE
its service
agents
or
similarly qualified
person
in order to avoid a hazard.
LEVELLING LEGS
Use to level the
washing
BASE
machine for correct balance
&
spin operation.
Accessories
Height adjustment
plate
Inlet hose
Drain hose
LG guarantees the continued supply spare parts for a period after the date of manufacture of not less
than 5 years for electrical components and 3 years for cabinet and other cosmetic components.
If there is any conflict between this LG Express Guarantee and the
Guarantee Act 1993, the provisions of the Act shall apply.
Model No.
:
Date
Serial No.
:
Purchased From
28
P/No.3828EA3003U
purchased
provisions
of the Consumer
:
:
1 Each for cold and
2 Pieces
hot water
5
P/No.3828EA3003U
INSTALLATION
SPECIFICATIONS
Connect the drain hose
Inlet water pressure
max
Connect the drain hose to
Attach the
clip to the drain hose.
And then push it toward the body
of the washing machine as
indicated by the arrow.
the outlet of the drain pump
located at the rear of the
machine.
washing
Place the hose
laundry
Do not
tub
or
use an
guide
over
the stand
the
800 KPa
min 30 KPa
pipe.
(115 psi)
(4 psi)
extension hose.
Holder
M90-12m Standpie inmuhegtofaps clrhetofmain
Within 50mm
NOTE:
Never lay down
the drain
the drain hose is
hose,
as
water will be
Be
sure
To
prevent syphoning, the drain hose should
from the end of the hose
The
1 35m
Drain Hose
Hose
Guide
properly
so
discharged.
it will not kink
or
0.9~
lift from the sink.
1.2m
not extend more than 50 mm
approximately
0.9~1.2mfrom the floor.
Flooding drainage
Your machine
requires
a
floor
drainage slope (or hole)
1 50m
Alowingfor adjustblef
8 5m
guide.
should be
discharge height
routed
that will SAFELY DISPOSE of the FULL FLOW of
any water that may leak out should the machine malfunction. It is therefore the OWNER'S RESPONSIBILITY to make sure this machine is installed in an area with a drain hole (or slope) that will prevent any possi-
bility
of water
damage
to floor
coverings
or
property.
Electricity supply
Connect the inlet hose
Check that
sealing
washers
are
firmly
606mm
nuts
securely by
hand.
washing
(Fig. 1)
MACHINE
END
TAP
SEALING
Attach the
straight end of the hose to the tap.
Tighten the coupling nuts securely by hand. (Fig. 2)
Either hose
Turn
can
be attached to hot inlet valve and
TWIST
TAP
tap.
Do not install the washer where it is
directly exposed
WASHER
INLET
VALVE
INLET
to
Electrical
(Fig. 2)
sunlight, wind,
FLOW of any water that may leak out should the machine malfunction.
It is therefore the OWNER'S RESPONSIBILITY to make sure this machine is installed in
an area
with
drain hole
(or slope) that will prevent any possibility of water damage to floor coverings or property.
temperature : Max 70°C(160°F)
Permissible water pressure : Max 116psi (800kpa, 8kg/cm2), Min 4psi (30kpa, 0.3kg/cm2)
If water temperature & pressure is greater than above, it may cause damage to the machine. If you
Permissible water
have uncontrolled water
to
or
temperature & pressure you should fit a temperature & pressure relief valve
temperature & water pressure remains within the safe limits. Consult a plumber
electrician if you are unable to adjust water temperature and pressure.
ensure
Do not
P/No.3828EA3003U
See the
ratings
kg
attached to the
rating plate
rear
of the washer
(EX-LARGE
water
Approx. 78L
level)
Standard amount of water used
Approx. 170L
(FUZZY cycle)
Washing system
Water
tap pressure
Outer dimension
Automatic
30
-
800
reverse
kPa(0.3
pulsator type
-
8kgf / cm2)
590×606×958(W×D×H)mm
that water
over
6
6.5
Standard amount of water
rain etc.
Plug the power cord of this washer into a properly installed standard power point that is switched & earthed.
Your machine requires a floor drainage slope (or hole) that will SAFELY DISPOSE of the FULL
a
automatic washer
Fully
Washing capacity
HOSE
(Fig. 1)
WF-T652
Type
END
SEALING
the
CAUTION
Model
WASHER
taps and check for leaks. Tighten the coupling nuts
firmly if there is any leakage. If water pressure is strong, close the
water tap completely then open it slightly.
on
590mm
seated.
Attach the curved end of the hose to the inlet valve of the
machine; Tighten the coupling
240V
50 Hz sinusoidal
tighten
the
coupling
nuts with
a
tool. Inlets
are
plastic
:
Do not
strip
or
Weight
41kg
crossthread.
27
P/No.3828EA3003U
TROUBLE-SHOOTING GUIDE
If
a abnormal symbol appears in the display window, check the following before asking for service.
Request for the service center or agent in the case of failure or damage except for the following.
This appliance is fitted with a safety function that automatically stops the operation of the washing machine
when it is exposed to heavy disturbance on the mains.
TROUBLES
No water
Install the
washing machine
on a
Install the washing machine on a level and firm surface.
the washing machine more than 10cm from the wall to
CHECK UP
Keep
The base
supply
opening
must not be obstructed
machine is installed
flat and firm surface.
prevent vibration noise during spinning.
when the
by carpeting
carpeted floor.
need reinforcing to prevent the normal
washing
on a
Wooden floors may
with an unbalanced load.
vibration which
occurs
Is
tap turned off?
Is the water
supply
cut off?
Is the
tap frozen?
10cm
No drain
If the
CAUTION
Check if electric
Check that the drain
Is the drain hose
Check whether the
power has gone off.
hose is not twisted
hung properly?
drain pump is locked
or
kinked?
No
appliance
device the
core
positioned
so
Level the
from
it is not
subject
or
to
a
cord extension set
electrical
splashing
or
electrical
portable
outlet
outlet device should be
portable
or ingress
of moisture.
washing machine
Check the level of the
Is the wash load
supplied
extension set
by foreign objects.
spinning
unevenly balanced?,
evenly & close the
redistribute the load
is
washing
Is the lid closed?
You
lid.
can
washing
machine
using
a
spirit
level
on
the side of the
cabinet
check the level also
by visually lining up the washer with
the fills,
adjacent walls or
cabinets.
AUTO OFF
Power failure?
Fuse blown
No power
or
check
circuit breaker?
Is the power button on?
Is the power cord
or switched off?
unplugged
You
START
PAUSE
Not
working
Has the START/PAUSE button
been
Is the water shut off?
A
high
Is the water level normal?
pressed?
The power will automatically
shut down after 10 minutes.
can
level the washer
using
the A.L
spindle fitted
to the cabinet.
Screw the A.L SPINDLE
legs up or down as required.
height adjustment plates are provided in the accessory bag. These fit under A.L SPINDLE
if required to allow for greater adjustment of the legs.
When washing machine does not even out, turn A.L SPINDLE right or left to be level.
Should the height adjustment exceed the maximum allowed by the A.L SPINDLE, place height adjustment
plats provided under the legs as shown in the diagram.
Additional
level of vibration
and noise
during spin-
ning.
Is the
washing
installed
on a
machine
correctly
firm and level surface?
UP
Others
ASK FOR SERVICE
1
26
P/No.3828EA3003U
plate
used
2
plates used
3
plates used
4
plates used
DOWN
A.L SPINDLE
7
P/No.3828EA3003U
AUTOMATIC AND MANUAL PROGRAMMING
SCRUD
Fully automatic control
The
Fuzzy program is used for average
Press POWER ON button.
Scrud is the
Close the lid and press START/PAUSE button.
lights will scroll up and down while the
day to day washing.
washer is
detergent,
in the machine it can result in stains on your clothes
If you wish to use fabric softener we recommend:
Using fabric the dispenser, do not splash or overfill.
build-up
The water level
Load clothes.
Add
bleach and conditioner
as
working
out the
optimum
water level for your
clothes load.
desired.
Clean
washing
Each load of
washing
washing
into
conditions. For
clothing
clothes with very
example, you
dirty work clothes.
Some fabrics
lint collectors and
from other
are
fabrics, which
are
wash at
lint
which needs the
same
should not wash delicate
pick up lint, dirt and colour
producers. Some examples are listcan
a
WATER TEMP. SELECTOR
Used to select proper water
has finished.
build-up occurring.
If you use fabric softener
inside of your machine.
or
do
regular cold
water
washing,
Fill your machine with hot water. Add about two cups of
Let it rotate for several minutes.
Towels
Stop
the
Nappies
After
soaking,
Permanent press fabrics
Chenille / Candlewick
machine, open the lid. and leave it
drain the machine and
run
hot
on
the
dispenser
and contribute to
producers.
WARM
HOT
COLD
a
it is
important
that you
powder detergent
occasionally
that contains
clean the
phosphate.
to soak
overnight.
through a regular cycle.
during this procedure.
the machine
We do not recommend that you wash clothes
lint
a warm or
CLEANING THE INSIDE OF YOUR WASHER
Corduroy
Synthetics
separately from
We recommend
build-up.
LINT PRODUCERS
that you wash lint collectors
cycle
smell in your washer.
temperature of
washing water.
[Warm Hot Cold Warm
(Hot and Cold light on)] mode repeats.
ed below.
sure
the
unpleasant
regular
LINT COLLECTORS
Make
as soon as
or an
any washer when the fabric softener comes
fault in the machine. If scrud is allowed to
intervals e.g. approx. every 5th wash.
Fabric softener of thinner consistency is less likely to leave residue
separate wash loads
should contain
dispenser
Clean your machine regularly.
Cold water washing increases the chance of this
Preparation before wash
Sort your
given to the waxy build-up that can occur within
detergent. This build-up is not brought about by a
name
into contact with
EXT
EXT
GEN
WATER
TEMP.
WHEN THERE IS A FEAR OF FREEZING
1 Close the water
2 Hold the water
taps and
supply
remove
hoses
as
the water
supply hoses.
drawing so that
shown in the
it
does not sag.
3 Set the POWER button to "ON" and the WATER TEMP. to
4 Press START/PAUSE button and
Check if
laundry
is washable in
Be
sure
to remove
keys, pins
laundry.
water.
as
things
such
and coins from the
Water which remains in the water
sep-
Shake loose dirt off before
washing.
According
laundry, soiled
extent or washing
fluffy laundry by turning
it inside out.
8
P/No.3828EA3003U
Wash delicate
ping
them in
a
clothes, wrap-
nylon
net.
WATER LEVEL
SELECTOR
Use to select the
of
proper amount of
water in relation to
habit you can select
suitable wash
the
option.
By pressing the button wash option is
changed GENTLE
Controlled automat-
SPIN
Wash
supply is removed.
stop the operation.
select manual spin mode.
5 Press START/PAUSE button to
to kinds
oily or dyed laundry
arately.
washing
warm.
machine for
20 seconds.
WASH
OPTION
Wash
operate
the
RINSE
WASH
EXTRA
EXTRA
repeatedly.
of
weight and type
laundry.
ically
in the
program.
Fuzzy
6 Lower the drain hose and
7 Press START/PAUSE button and
operate for
30 seconds.
Set the POWER button to "OFF".
Drain the water in the bowl and the drain hose.
IF FROZEN
1 Remove the water
supply hose,
and immerse it in
hot water at approx. 40°C.
2 Pour approx. 2 liters of hot water at approx.
into the bowl for 10 minutes.
3 Connect the water
washing
machine
40°C,
supply hose to the water tap, and confirm that
performs the supply and drainage of water.
the
25
P/No.3828EA3003U
MAINTENANCE
Manual control
CLEAN THE FILTER IN THE VALVE
Clean the filter when water
1Disconnect
supply
the power cord.
2
into the tub appears dirty or the inlet valve is clogged with impurity.
Pull out the filter from the
Use a tooth brush to get rid of
3
inlet valve.
dirt.
Replace
Other programmes are selected
Press POWER ON button.
it.
as
follows.
Load clothes.
Add
detergent,
bleach and conditioner
desired.
as
Select
temperature, level, process, program and
Close the lid and press START/PAUSE button.
DETERGENT
VOLUME
CLEAN THE LINT FILTER
1Pull
out the waste thread collec-
tion net from the tub in the direction of the
arrow
2
Turn inside out to
get
3
rid of filth.
Insert it into the
original
location.
options
described below.
PROCESS
SELECTOR
DISPLAY
Used to indicate proper
detergent for
as
Used to indicate the
Use to select the desired
amount of
time left of all Processes
each water level.
or
function among SOAK,
WASH, RINSE or SPIN.
reservation.
below.
START/PAUSE
BUTTON
Use to start
washing
porarily.
or
stop the
machine tem-
After 10 minutes in pause
state, the power is
automatically
turned off.
AUTO OFF
WATER
TRA WASH
Wipe
and the control
with
a
LM
S
CAUTION
stains from the cabinet
Do not pour water directly on the cabinet.
Do not wipe the cabinet with benzine, thinner,
panel
soft cloth.
DETERGENT
EX
TRA RINSE
NTLE SPIN
CLEAN THE CABINET
.
cleanser, alkaline detergent
Do not rub the cabinet with
When you use
instructions.
a
chemical
DELAY
HOUR
TIME
LEFT
MIN.
WATER
DELAY
LEVEL
START
Unfasten 2
1
screws on
the back
cover.
2
Remove
as
foreign objects
pins, buttons, coins;
by
PROGRAM
scrubbing
brush.
dustcloth, follow the
Used to
3
Reassemble the cap as indicated by the arrow and fasten it.
such
etc.
reserve
the time
CHILD LOCK
Used to lock
vent wrinkle while you
from
are
away for
5...
48
a
while.
12
14
16
3] repeatedly.
prevent all the setting
being changed by
over
24
P/No.3828EA3003U
if water leaks after
(Bottom view)
reassembling.(Rubber ring
is in the
PROGRAM
SELECTOR
According
to
laundry
and stain you can select
suitable program
locking, push both
simultaneously
and for unlocking push
yourself.
By pressing the button
washing program
changes in order of
SPEEDY
[NORMAL
them
HEAVY
a
child.
For
buttons
once more
washing
Check it
unlock
the control buttons to
By pressing the button
changes [3 4
:
or
when wash program
ends from now to pre-
the time
CAUTION
PAUSE
or wax.
a
(when drainage is bad)
Turn the cap as indicated
the arrow and unfasten it.
START
PROCESS
DELAY START
CLEAN THE PUMP CASING
WOOL
RINSE
SPIN
WATER
OPTION
NORMAL
SPEEDY
HEAVY
SOAK
WASH
in
process.
POWER BUTTON
Power is
automatically
cut after the wash pro-
gram finishes.
WOOL
NORMAL] repeatedly.
(Bottom view)
cap)
9
P/No.3828EA3003U
To
Use the Normal program for normal dirty laundry.
All conditions such as water level, wash time, rinse and
spin
time
are
automatically
selected
1
by microcomputer.
Press the POWER button.
Deep1
gives
see
the
the POWER
2
button
:
Press the START/PAUSE
Preset all
AUTO OFF
can
be set
key
conditions
washing
according to the
AUTO OFF
(cold or hot water
following table 1.)
cycle settings during operation
after all
set
rinse
Warm wash water
...
unwanted alteration of
the child lock
option
may be utilised.
HOW TO LOCK
1Press
All you have to do is press the START/PAUSE button.
Check to see if everything is ready.
Preset program
guard against
are
3
manual.
Press both the PROCESS
key and the
key simultaneously while
wash is proceeding, then all the keys
are locked until completing the wash
program or unlocking them.
PROGRAM
washing
conditions.
optionally
PROGRAM
PROCESS
DELAY
HOUR
TIME
LEFT
MIN.
START
PAUSE
"CJ" and the remaining time are
altematively shown on the diplay.
Fuzzy wash
power is
indicator
lamp
illuminates when the
on.
HOW TO UNLOCK
If you want to unlock
during
wash press both the water
temp key and the
water level
key simultaneously again
Table 1. WASH WATER TEMPERATURE GUIDE
USED FOR
WATER TEMPERATURE
White and colorfast cottons, linens with heavy or normal soil.
Permanent press & synthetics with heavy or oily soil.
Hot
Dark
Warm
or
non-color fast fabrics. White & colored
synthetics.
Permanent press with normal or light soil.
Wool is only selected with warm.
Lightly
Cold
One
or more
wash
options
changed
Wash program is
EXTRA WASH
:
soiled fabrics.
EXTRA RINSE
:
Table 2. FILL TEMPERATURE OF EACH CYCLE FOR PROGRAM
For each program, the
washing
machine
automatically
selects
a
suitable fill water
temperature.
GENTLE SPIN
FILL TEMPERATURE
APPENDIX EXPLANATION
PROGRAM
WASH
Normal, Heavy,
Speedy
Wool
A wash
temperature
RINSE
Fill
HOT
WARM
COLD
COLD
WARM
P/No.3828EA3003U
Fill cold for rinse is not able to
energy
WARM
to be selected is illuminated
10
temperature for wash is able
to
change
washing style.
be sellectable for every washing program.
according to sellected wash options.
follows
It gives additional 3 min wash
ex) If extra wash is sellected for extra-large water
wash time is changed to 24 min instead of 21
gives additional one deep rinse
ex) If extra rinse is sellected in the fuzzy
deep rinse.
needed
min.
laundry in the heavy program
(normal time)
It
program it
gives
two
deep
rinses instead of
one
It
gives gentle spin instead of normal spin.
ex) If both extra wash and extra rinse are sellected for extra-large water needed laundry in
the heavy program, it gives 24 min wash instead of 21 min normal wash and two deep
rinses instead of one normal deep rinse.
because of
change
saving.
Fill temperature is not able to
transformation.
during
for your
:
can
as
a
complete cycle
on
change
to
the control
protect laundry
panel.
23
P/No.3828EA3003U
HOW TO USE THE BLEACH AND THE SOFTENER
How to
When
use
the bleach agent
using bleach, always make
Pour the
clothes
sure
powdered bleaching agent
only for bleaching.
Pour the
liquid bleaching agent
it is
after
oxygenated
separating
2
bleach.
Put
laundry
in the wash bowl.
3
Press the START/PAUSE button.
the
Bleach Inlet
into the
washing
cask.
DELAY
HOUR
TIME
LEFT
MIN.
START
PAUSE
Using fabric softener
Spin
basket
(For detailed description,
refer directions
on
fabric softener
container.)
Remove the softener cup by pulling out in the direction of the
Put fabric softener into the cup and return it to the orig-
arrow.
inal
position
before
starting the wash.
automatically dispensed
The fabric softener is
at the last rinse
cycle.
Do not add too much softener.
Refer to the softener manufacturer's instructions.
Put
detergent
4 the display
or
in the wash bowl
instruction of
as
indicated
detergent
on
manufac-
5
Close the lid.
turer.
Softener
Cup
WATER
-
DETERGENT
EX
L
M
S
CAUTION
When
Don't
detergent. Use softener in last rinse water.
using dispenser, dilute softener(30ml) with fresh water(30ml)
When
filling dispenser,
use
softener with
do not
splash
or
overfill. It may stain clothes.
Never pour fabric softener and bleach
directly on clothes. It may stain them.
spotting
dishwashing liquid (or mild bar soap) and rewash.
Opening the lid during the spin cycle will quicken the softener deposit time, lowering its effect.
Do not leave the washer for more than a day after depositing fabric softener into the tub.
The effect of softening is changeble to position of inlet box and wash bowl.
If
occurs, wet and rub hand
Selectable washes described in page 16 & 17
22
P/No.3828EA3003U
are
not
designed
to be used with the fabric softener.
Electric power is automatically out after
program finishes.
washing
11
P/No.3828EA3003U
SPEEDY WASH PROGRAM
Use this program for
washing slightly
soiled
laundry.
washing
This program is economical because of its short
Adjust
water level
Preset program
to the amount of
according
gives: -4 minutes wash
-Deep1 rinse
-2 minutes spin
LOAD SIZE AND DETERGENT
Water level and wash bowl
the power button
1Press
time.
laundry.
AUTO OFF
Water level will be automati-
hot water
can
MEDIUM
LARGE
EX-LARGE
the wash bowl in the FUZZY
Approx.
Approx.
Approx.
Approx.
the HEAVY programs.
44L
54L
64L
78L
selected based
volume of clothes
-Warm water
or
SMALL
cally
-Medium water level
(Cold
capacity
be set
optionally)
or
the
on
in
placed
If the movement of the clothes
items until the clothes
move
stops,
freely
too much
clothing
has been
put into the machine. Remove
some
around the wash bowl.
Detergent
HEAVY WASH PROGRAM
Use this program for
overalls, jeans
washing heavily
soiled durable
garments such
Use correct amount of
When
All conditions such
as
water
level, wash time and spin time
are
automatically
1Press
the power button
Preset
We recommend the
use
2 rinse
detergent which
detergent,
Using powdered soap
When
-Warm water
or
of
use
too much
AUTO OFF
-4 minutes
(Cold
hot water
can
be set
detergent manufacturer's instruction.
detergent recommended by Australian Wool
Board
or
New
are
low
sudsing
and dissolve
readly
to obtain the best wash
results.
Do not
sellected
by microcomputer.
program gives : -Deep
to the
use a
Zealand Wool Board.
as
etc.
washing
detergent according
woollens remember to
optionally)
powdered
soap flakes
which may
cause an over
sudsing problem
used the
should be followed.
following procedure
Set POWER button to "ON".
2
After the
3
When the soap flakes
4
Turn POWER button to "ON" and select the desired automatic
add the soap flakes and
are
rinsing efficiency.
flakes
are
1
agitating starts,
and decrease
operate for
2 minutes.
dissolved turn POWER button to "OFF" and load the
menu
laundry.
then press START/PAUSE button.
To dissolve the soap flakes quickly, prepare 5L of warm water and gradually stir in the desired amount of
flakes. Then add to the wash bowl and proceed with your cycle selection.
4Press
the START/PAUSE
button.
D
O
TIME
LEFT
MIN.
START
PAUSE
CAUTION
Do not wash
CAUTION
Since soap flakes are more liable to remain in clothing compared to
and bad odor may occur unless the clothing is rinsed sufficiently.
If
excessive amount of soap flakes are used or soap flakes are directly
temperature, soap content and soap dregs adhere to the inside of the
an
low
the float
an
electric mat
or
blanket.
synthetic detergent, yellowing
making
poured
hose,
into water at
a
wash bowl and
the
laundry dirty.
Do not use soap flakes in the following cases.
When the soak wash is used as yellowing or blackening
may
occur
due to the
long
term
SOAK WASH action.
12
P/No.3828EA3003U
21
P/No.3828EA3003U
WASHING PROCEDURE
Here is the
description
of
washing cycle programmed
Auto-Water
Programmed
Wash Cycles
Level
into the
Washing
Setting
washing
machine memory.
Rinsing
EX-LARGE
2
Spinning
21 min.
4 min.
Deep2
Spray rinse + Deep1
SMALL
3
NORMAL
SPEEDY
HEAVY
WOOL
required
(Approx.)
53 min.
max.
9 min. min.
[CYCLE] selector
Time
DEEP rinse is 3min a time
NORMAL
PROGRAM
~
PROGRAM
32 min.
After
closing
the lid press the START/PAUSE
button.
SPEEDY
21 min.
HEAVY
(PROCESS)
2 min.
(3 min.)
DEEP rinse is 3min a time
EX-LARGE
NORMAL
DEEP1
4 min.
MEDIUM
63 min.
max.
4 min.
Deep2
Spray rinse + Deep1
9 min. min.
SMALL
23 min.
~
Set the program selector to
2
Put
laundry
[SPEEDY] by pressing
Power goes off
finishes.
it.
in the wash bowl.
3
40 min.
PROGRAM
automatically
after wash
[CYCLE] selector
NORMAL
SPEEDY
HEAVY
WOOL
WOOL
LARGE
6 min.
DEEP2
(3 min.a time)
1 min.
(SOFT)
DEEP rinse is 3min a time
EX-LARGE
SOAK 60 min.
SOAK
Deep2
Spray rinse + Deep1
SMALL
PROGRAM
38 min.
Set the program selector to
pressing it.
113 min.
4 min.
~
92 min.
Put
INFORMATION
The time
detergent
5 display
or
in the wash bowl
instruction of
as
detergent
indicated
on
the
manufacturer.
6
Close the lid.
:
required
cycle may differ depending on the water pressure. The time shown
Table is set under the situation of water supply for approx. 3min.per cycle(20 liters per minute
EX-LARGE water level).
for each
The indication shown
Spray
[HEAVY] by
by
rinse is carried out rinse
on
the
is the standard time.
cycle
in accordance with
filling
WATER
-
DETERGENT
EX
L
water.
M
S
NOTE:
High
water pressure may cause noise
if the noise is
annoying.
20
P/No.3828EA3003U
during
the water
supply.
Turn the water
tap
to
adjust water supply
Electric power is
washing
automatically
out after
program finishes.
13
P/No.3828EA3003U
Use this program for
washing
Do not wash woollens with
a
washable
woollens, less than 2.0kg.
dry cleaning
Do not set water level to medium
or
1Press
label attached.
the power button
below.
WASH&RINSE?
Wash clothes with buttons and accessories inside out.
Preset program
gives:
?
When it is not desirable to
(Deep 2)
spin
-1 minutes soft
-Large
spin
clothes in order to avoid wrinkles.
SOAK
WASH
RINSE
SPIN
AUTO OFF
-6 minutes wash
-2 rinses
?
water level
-Warm water
PROCESS
NOTE
When you wish to
:
change washing cycles,
select them
manually.
Press the power
button.'
Set the WASH & RINSE
Press the START/
position by pressing
PAUSE button after
PROCESS button.
closing
Wash and rinse ends.
(At this time
the lid.
the water in
the tub does not pump
out.)
RINSE&SPIN?
Use this program for
This program
Do not
use
washing heavily
provides
the best
soiled
washing
this program for
Preset program
laundry
after
soaking.
effect.
washing laundry
-60
minutes
gives:
soaking
-Deep 1 rinse
that may discolor.
(Cold
or
hot water
can
be set
optionally)
?
When it is desirable to rinse and
spin
clothes which have
already
been washed.
SOAK
WASH
RINSE
SPIN
1Press
the power button
PROCESS
AUTO OFF
-Warm water
?
Press the power
button.
WASH&SPIN?
?
?
Set the RINSE & SPIN
Press the START/
position by pressing
PAUSE button after
PROCESS button.
closing
When
heavy soiling
is removed
prior
Rinse and
spin
end.
Wash and
spin
end.
the lid.
to normal
washing
SOAK
WASH
RINSE
SPIN
PROCESS
Press the power
button.
14
P/No.3828EA3003U
Set the WASH & SPIN
Press the START/
position by pressing
PAUSE button after
PROCESS button.
closing
the lid.
19
P/No.3828EA3003U
2
WASHONLY?
?
?
When wash
liquid
PROGRAM
[CYCLE] selector
3
NORMAL
SPEEDY
HEAVY
WOOL
is to be used twice.
SOAK
WASH
RINSE
SPIN
PROGRAM
PROCESS
Press the START/PAUSE button after
Press the power
button.
Set the WASH
pressing
position by
PROCESS
button.
RINSEONLY?
?
?
closing
Press the START/
Wash ends.
PAUSE button after
time the water in the
closing
the lid.
When it is desirable to rinse clothes which have
(At this
tub does not pump
already
Set the program selector to
[WOOL] by pressing
it.
the lid.
Power goes off automatically
after wash finishes.
out.)
been washed.
SOAK
WASH
RINSE
SPIN
2
PROCESS
Press the power
button.
Set the RINSE
pressing
position by
PROCESS
button.
Press the START/
Rinse ends.
PAUSE button after
time the water in the
closing
the lid.
PROGRAM
[CYCLE] selector
SOAK
WASH
RINSE
SPIN
(At this
tub does not pump
3
out.)
PROCESS
DRAINorSPINONLY?
?
?
When it is desirable to drain water from the bowl
before
or
spin
clothes
drying.
After
closing the lid press the
START/PAUSE button.
SOAK
WASH
RINSE
SPIN
Set the program selector to
all the lights turn on.
[SOAK] by pressing
it 6 times until
Power goes off
finishes.
automatically
after wash
PROCESS
Press the power
button.
Set the SPIN
pressing
button.
18
P/No.3828EA3003U
position by
PROCESS
Press the START/
Spin
ends.
PAUSE button after
closing
the lid.
15
P/No.3828EA3003U
1Press
the power button ON.
2
Select program.
3
TIME
LEFT
a
desired
Program.
Deposit detergent.
6
Close the lid.
MIN.
Select how many hours from
now you would like your wash
Put laundry and press the
START/PAUSE button. The
to finish.
washer
senses
laundry
and
When you
delay time
start for WOOL is not
delay
possible to prevent damage
laundry.
5
DELAY
START
If not selected NORMAL program will be provided.
The
Put laundry and press the
START/PAUSE button.
MIN.
PROGRAM
Select
4
TIME
LEFT
NORMAL
SPEEDY
HEAVY
WOOL
AUTO OFF
Set the time.
to
push the button
changes [3 4
the
mended
the amount of
displays recomamount of detergent.
5... 12 14 16... 48
The washer does not
3] repeatedly.
amount of
laundry
sense
at WOOL
the
Pull the
detergent box forward
deposit proper amount of
detergent, then push back the
If the lid is not
and
closed, the machine generates
box.
If the lid is
Concentrated
detergent
is not
an
completely
alarm sound.
opened
START WASHING
suitable for DELAY START
DELAY
can
not
proceed.
WASHING.
program.
EX)
It's 7
a.m. now.
If
you'd
like your wash to finish at 9 p.m. set the time
as
in the
figure
below.
CAUTION
A wet
detergent box may cause the detergent
use powdered hand soap.
to
clump together.
Do not
If the lid is open, the machine will not
TIME
LEFT
16
P/No.3828EA3003U
14 hours
:
7 a.m.~9p.m.
operate and
an error
signal
will sound.
When you would like to cancel this program press the POWER button OFF.
MIN.
17
P/No.3828EA3003U