Sony KLV-48W562D Reference Guide

Add to My manuals
40 Pages

advertisement

Sony KLV-48W562D  Reference Guide | Manualzz
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\010COV.fm
Television
Operating Instructions
masterpage: Cover
Parts and Controls
Connecting TV to the Internet
Watching TV
Navigating through Home Menu
Viewing Pictures from Connected
Equipment
Additional Information
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\010COVTOC.fm
masterpage: Left
Table of Contents
Safety Information . . . . . . . . . . . . . . . . . . . . . 3
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Parts and Controls
TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Remote Control . . . . . . . . . . . . . . . . . . . . . 8
Connecting TV to the Internet
Setting up the Internet Connection . . . . 10
Type 1: Secured network with Wi-Fi
Protected Setup™ (WPS) . . . . . . . . . . . . . . . 10
Type 2: Secured network without Wi-Fi
Protected Setup™ (WPS) . . . . . . . . . . . . . . . 11
Type 3: Unsecured network with any type
of wireless LAN router . . . . . . . . . . . . . . . . . 11
Type 4: Wired network set-up . . . . . . . . . . . 11
Preparing a Wired Network . . . . . . . . . . . . . 12
Viewing the Network Status . . . . . . . . . . . . 12
If You Cannot Connect to the
Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Privacy Policy . . . . . . . . . . . . . . . . . . . . . . 12
Watching TV
Navigating through Home
Menu
All Apps . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Photo Sharing Plus . . . . . . . . . . . . . . . . . . . . 14
Using the TV as a Photo Frame Mode. . . . . 15
Listening to FM Radio. . . . . . . . . . . . . . . . . . 15
Favourites . . . . . . . . . . . . . . . . . . . . . . . . . 16
Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Playback Photo/Music/Video via USB . . . . 16
Home Network . . . . . . . . . . . . . . . . . . . . . 17
Connecting to a Home Network . . . . . . . . . 17
Renderer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Display Settings for Media Servers . . . . . . . 18
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
System Settings . . . . . . . . . . . . . . . . . . . . . . 18
Customer Support . . . . . . . . . . . . . . . . . . . . 24
Viewing Pictures from
Connected Equipment
Connection Diagram . . . . . . . . . . . . . . . . 26
Using Audio and Video Equipment . . . . .27
Using Screen mirroring . . . . . . . . . . . . . . .27
Changing the Viewing Style . . . . . . . . . . 13
Changing the Wide Mode . . . . . . . . . . . . . . 13
Setting Scene Select . . . . . . . . . . . . . . . . . . . 13
Additional Information
Installing the TV to the Wall . . . . . . . . . . 28
Troubleshooting . . . . . . . . . . . . . . . . . . . .32
Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Specifications . . . . . . . . . . . . . . . . . . . . . .35
2GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\020REG.fm
masterpage: Right
Introduction
Thank you for choosing this Sony product.
Before operating the TV, please read this manual thoroughly and
retain it for future reference.
Note
• Before operating the TV, please read the “Safety Information”
(page 3).
• Instructions about “Installing the TV to the Wall” are included
within this TV’s instructions manual.
• Images and illustrations used in Setup Guide and this manual
are for reference only and may differ from the actual product.
Location of the Setup Guide
GB
Setup Guide is placed on top of the cushion inside the TV carton.
Location of the identification label
Labels for TV Model No. and Power Supply rating are located on
the rear of the TV.
Labels for the AC adapter Model No. and Serial No. are located on
the bottom of the AC adapter.
Safety Information
WARNING
Batteries must not be exposed to excessive heat such as
sunshine, fire or the like.
Never place a television set in an unstable location. A television
set may fall, causing serious personal injury or death. Many
injuries, particularly to children, can be avoided by taking simple
precautions such as:
 Using cabinets or stands recommended by the manufacturer of
the television set.
 Only using furniture that can safely support the television set.
 Ensuring the television set is not overhanging the edge of the
supporting furniture.
 Not placing the television set on tall furniture (for example,
cupboards or bookcases) without anchoring both the furniture
and the television set to a suitable support.
 Not placing the television set on cloth or other materials that
may be located between the television set and supporting
furniture.
 Educating children about the dangers of climbing on furniture
to reach the television set or its controls.
If your existing television set is being retained and relocated, the
same considerations as above should be applied.
• Only qualified service personnel should carry out wall-mount
installations.
• For safety reasons, it is strongly recommended that you use
Sony accessories, including:
Wall-Mount Bracket: SU-WL450
• Be sure to use the screws supplied with the Wall-Mount Bracket
when attaching the Mounting Hooks to the TV set. The supplied
screws are designed as indicated by illustration when measured
from the attaching surface of the Mounting Hooks.
The diameter and length of the screws differ depending on the
Wall-Mount Bracket model.
Use of screws other than those supplied may result in internal
damage to the TV set or cause it to fall, etc.
8 mm - 12 mm
Screw (supplied with the
Wall-Mount Bracket)
Mounting Hook
Hook attachment on rear
of TV set
Transporting
• Before transporting the TV set, disconnect all cables.
• Two or three people are needed to transport a large TV set.
• When transporting the TV set by hand, hold it as shown below.
Do not put stress on the LCD panel and the frame around the
screen.
Installation/Set-up
Install and use the TV set in accordance with the instructions
below in order to avoid any risk of fire, electric shock or damage
and/or injuries.
Installation
• The TV set should be installed near an easily accessible AC
power outlet (mains socket).
• Place the TV on a stable, level surface to prevent it from falling
over and causing personal injury or property damage.
• Install the TV so that the TV’s Table-Top Stand does not
protrudes out from the TV stand (not supplied). If the Table-Top
Stand protrudes out from the TV stand, it may cause TV set to
topple over, fall down, and cause personal injury or damage to
the TV.
• When transporting the TV set, do not subject it to jolts or
excessive vibration.
• When transporting the TV set for repairs or when moving, pack
it using the original carton and packing material.
3GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\020REG.fm
masterpage: Left
 Operate the TV set on a 100 V - 240 V AC supply only.
 When wiring cables, be sure to unplug the AC power cord
(mains lead) for your safety and take care not to catch your feet
on the cables.
 Disconnect the AC power cord (mains lead) from the AC power
outlet (mains socket) before working on or moving the TV set.
 Keep the AC power cord (mains lead) away from heat sources.
 Unplug the AC power plug (mains plug) and clean it regularly. If
the plug is covered with dust and it picks up moisture, its
insulation may deteriorate, which could result in a fire.
Topple prevention
8 mm - 12 mm
M6
Note
1.5 N·m/1,5 N·m
{15 kgf·cm}
Ventilation
• Never cover the ventilation holes or insert anything in the
cabinet.
• Leave space around the TV set as shown below.
• It is strongly recommended that you use a Sony Wall-Mount
Bracket in order to provide adequate air circulation.
Installed on the wall
30 cm
10 cm
10 cm
10 cm
Leave at least this space around the set.
Installed with stand
30 cm
10 cm
10 cm
6 cm
Leave at least this space around the set.
• To ensure proper ventilation and prevent the collection of dirt or
dust:
 Do not lay the TV set flat, install upside down, backwards, or
sideways.
 Do not place the TV set on a shelf, rug, bed or in a closet.
 Do not cover the TV set with a cloth, such as curtains, or items
such as newspapers, etc.
 Do not install the TV set as shown below.
Air circulation is blocked.
• Do not use the supplied AC power cord (mains lead) on any
other equipment.
• Do not pinch, bend, or twist the AC power cord (mains lead)
excessively. The core conductors may be exposed or broken.
• Do not modify the AC power cord (mains lead).
• Do not put anything heavy on the AC power cord (mains lead).
• Do not pull on the AC power cord (mains lead) itself when
disconnecting the AC power cord (mains lead).
• Do not connect too many appliances to the same AC power
outlet (mains socket).
• Do not use a poor fitting AC power outlet (mains socket).
NOTE ON AC ADAPTER
Warning
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
To prevent fire or shock hazard, do not place objects filled with
liquids, such as vases, on the apparatus.
Do not install this equipment in a confined space, such as a
bookshelf or similar unit.
• Please ensure that the AC power outlet (mains socket) is
installed near the equipment and shall be easily accessible.
• Be sure to use the supplied AC adapter and AC power cord
(mains lead). Otherwise it may cause a malfunction.
• Connect the AC adapter to an easily accessible AC power outlet
(mains socket).
• Do not coil the AC power cord (mains
lead) around the AC adapter. The core
wire may be cut and/or it may cause a
malfunction of the TV.
• Do not touch the AC adapter with wet hands.
• If you notice an abnormality in the AC adapter, disconnect it
from the AC power outlet (mains socket) immediately.
• The set is not disconnected from the AC source as long as it is
connected to the AC power outlet (mains socket), even if the set
itself has been turned off.
• As the AC adapter will become warm when it is used for a long
time, you may feel hot when touching it by hand.
Prohibited Usage
Do not install/use the TV set in locations, environments or
situations such as those listed below, or the TV set may
malfunction and cause a fire, electrical shock, damage and/or
injuries.
Location:
Wall
Wall
AC power cord (mains lead)
Handle the AC power cord (mains lead) and outlet (mains socket)
as follows in order to avoid any risk of fire, electrical shock or
damage and/or injuries:
 The shape of AC power plug (mains plug), which is supplied
with the TV set, varies depending on the region. Be sure to
connect the appropriate supplied AC power cord (mains lead)
with the plug that fits into the AC power outlet (mains socket).
 Use only Sony supplied AC power cords (mains lead), not those
of other brands.
 Insert the plug fully into the AC power outlet (mains socket).
• Outdoors (in direct sunlight), at the seashore, on a ship or other
vessel, inside a vehicle, in medical institutions, unstable
locations, near water, rain, moisture or smoke.
• If the TV is placed in the changing room of
a public bath or hot spring, the TV may be
damaged by airborne sulphur, etc.
• For best picture quality, do not expose the screen to direct
illumination or sunlight.
• Avoid moving the TV from a cold area to a warm area. Sudden
room temperature changes may cause moisture condensation.
This may cause the TV to show poor picture and/or poor colour.
Should this occur, allow moisture to evaporate completely
before powering the TV on.
4GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\020REG.fm
Environment:
 Places that are hot, humid, or excessively dusty; where insects
may enter; where it might be exposed to mechanical vibration,
near flammable objects (candles, etc). The TV set shall not be
exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the TV.
 Do not place the TV in a humid or
dusty space, or in a room with oily
smoke or steam (near cooking tables
or humidifiers). Fire, electric shock, or
warping may result.
 Do not install the TV in places subject to extreme temperature,
such as in direct sunlight, near a radiator or a heating vent. The
TV may overheat in such conditions which can cause
deformation of the enclosure and/or TV malfunction.
Situation:
• Do not use when your hands are wet, with the cabinet removed,
or with attachments not recommended by the manufacturer.
Disconnect the TV set from AC power outlet (mains socket) and
antenna during lightning storms.
• Do not install the TV so that it sticks out
into an open space. Injury or damage
from a person or object bumping into
the TV may result.
Broken pieces:
• Do not throw anything at the TV set. The screen glass may break
by the impact and cause serious injury.
• If the surface of the TV set cracks, do not touch it until you have
unplugged the AC power cord (mains lead). Otherwise this may
cause an electric shock.
masterpage: Right
Precautions
Viewing the TV
• View the TV in moderate light, as viewing the TV in poor light or
during long period of time, strains your eyes.
• When using headphones, adjust the volume so as to avoid
excessive levels, as hearing damage may result.
LCD Screen
• Although the LCD screen is made with high-precision
technology and 99.99% or more of the pixels are effective, black
dots may appear or bright points of light (red, blue, or green)
may appear constantly on the LCD screen. This is a structural
property of the LCD screen and is not a malfunction.
• Do not push or scratch the front filter, or place objects on top of
this TV set. The image may be uneven or the LCD screen may be
damaged.
• If this TV set is used in a cold place, a smear may occur in the
picture or the picture may become dark. This does not indicate a
failure. These phenomena disappear as the temperature rises.
• Ghosting may occur when still pictures are displayed
continuously. It may disappear after a few moments.
• The screen and cabinet get warm when this TV set is in use. This
is not a malfunction.
• The LCD screen contains a small amount of liquid crystal. Follow
your local ordinances and regulations for disposal.
Handling and cleaning the screen surface/
cabinet of the TV set
Be sure to unplug the AC power cord (mains lead) connected to
the TV set from AC power outlet (mains socket) before cleaning.
To avoid material degradation or screen coating degradation,
observe the following precautions.
• To remove dust from the screen surface/cabinet, wipe gently
with a soft cloth. If dust is persistent, wipe with a soft cloth
slightly moistened with a diluted mild detergent solution.
• Never spray water or detergent directly on
the TV set. It may drip to the bottom of the
screen or exterior parts and enter the TV set,
and may cause damage to the TV set.
When not in use
• Never use any type of abrasive pad, alkaline/acid cleaner,
scouring powder, or volatile solvent, such as alcohol, benzene,
thinner or insecticide. Using such materials or maintaining
prolonged contact with rubber or vinyl materials may result in
damage to the screen surface and cabinet material.
• When adjusting the angle of the TV set, move it slowly so as to
prevent the TV set from moving or slipping off from its table
stand.
• If you will not be using the TV set for several days, the TV set
should be disconnected from the AC power (mains) for
environmental and safety reasons.
• As the TV set is not disconnected from the AC power (mains)
when the TV set is just turned off, pull the plug from the AC
power outlet (mains socket) to disconnect the TV set
completely.
• Some TV sets may have features that require the TV set to be
left in standby to work correctly.
Optional Equipment
For children
• Do not allow children to climb on the TV set.
• Keep small accessories out of the reach of children, so that they
are not mistakenly swallowed.
If the following problems occur...
Keep optional components or any equipment emitting
electromagnetic radiation away from the TV set. Otherwise
picture distortion and/or noisy sound may occur.
Wireless Function of the unit
• Do not operate this unit near medical equipment (pacemaker,
etc.), as malfunction of the medical equipment may result.
• Although this unit transmits/receives scrambled signals, be
careful of unauthorised interception. We cannot be responsible
for any trouble as a result.
Turn off the TV set and unplug the AC power cord (mains lead)
immediately if any of the following problems occur.
Ask your dealer or Sony service centre to have it checked by
qualified service personnel.
When:
 AC power cord (mains lead) is damaged.
 Poor fitting of AC power outlet (mains socket).
 TV set is damaged by being dropped, hit or having something
thrown at it.
 Any liquid or solid object falls through openings in the cabinet.
About LCD TV Temperature
When the LCD TV is used for an extended period, the panel
surrounds become warm. You may feel hot when touching there
by the hand.
Caution about handling the remote control
• Observe the correct polarity when inserting batteries.
• Do not use different types of batteries together or mix old and
new batteries.
• Dispose of batteries in an environmentally friendly way. Certain
regions may regulate the disposal of batteries. Please consult
your local authority.
• Handle the remote control with care. Do not drop or step on it,
or spill liquid of any kind onto it.
• Do not place the remote control in a location near a heat source,
a place subject to direct sunlight, or a damp room.
5GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
GB
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\020REG.fm
masterpage: Left
Disposal of the TV set
Disposal of Old Electrical &
Electronic Equipment (Applicable in
the European Union and other
European countries with separate
collection systems)
Disposal of Old Electrical &
Electronic Equipment (Applicable in
Republic of India)
This symbol and its variations indicate that this
product and its components, consumables,
parts or spares thereof shall not be treated as
household waste and may not be dropped in
garbage bins. Product owners are advised to
deposit their product at the nearest collection
point for the recycling of electrical and electronic equipment. Your
co-operation shall facilitate proper disposal and help prevent
potential negative consequences/hazards to the environment
and human health, which could otherwise be caused by
inappropriate waste disposal including improper handling,
accidental breakage, damage and/ or improper recycling of
e-waste. The recycling of materials will help to conserve natural
resources. For more detailed information about recycling of this
product, please contact your local civic office, your household
waste disposal service provider or the store where you made the
purchase. You may contact our company’s toll free number in
India for assistance.
Toll Free: 1800-103-7799
Visit: www.sony.co.in for product recycling
Reduction in the Use of Hazardous Substances
in Electrical & Electronic Equipment (Applicable
in Republic of India)
This product and its components, consumables, parts or
spares comply with the hazardous substances restriction of
India’s E-Waste (Management) Rules. The maximum allowable
concentrations of the restricted substances are 0.1% by weight
in homogenous materials for Lead, Mercury, Hexavalent
Chromium, Polybrominated Biphenyls (PBB) and
Polybrominated Diphenyl Ethers (PBDE), and 0.01% by weight
in homogenous materials for Cadmium, except for the
exemptions specified in Schedule II of the aforesaid Rules.
ATTENTION:
This product is qualified for the BEE Star rating in the ‘Home’
Mode.
The Objectives of Star Labeling Program is designed to
promote energy efficient products and practices.
When the television is initially set up, it is designed to meet
the BEE Star Labeling requirements while maintaining
optimum picture quality.
• Changes to certain functionalities of this television (TV
Guide, Picture/sound etc) may change the power
consumption.
• Depending upon such changed setting (eg., Retail mode),
the power consumption may vary which possibly could
exceed the stated energy consumption.
To reset the television to Star rating qualified settings, select
‘Home’ mode from the initial set-up procedure in ‘factory
settings’ under the ‘Set-up’ menu.
* Attention statement is subject matter of BEE, and applicable if
function is available. For “Factory Settings”, go to “Customer
Support” menu.
** “Home mode” conditions are as per BEE guideline only.
6GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\030PAR.fm
masterpage: Right
 CH/INPUT
Switches between the Programme
Up/Down screen and the input select
screen.
Parts and Controls
TV
 (Sensors/LED indicator)
1
3
Note
• Make sure that the TV is completely turned off before
unplugging the AC power cord (mains lead).
• To disconnect the TV from the AC power completely,
pull the plug from the mains socket.
Hint
• The  + button has a tactile dot. Use it as a reference
when operating the TV.
4
 / (Power)
Turns the TV on or switches to standby
mode.
 +/–/
/
(Volume / Item select)
• Increases/decreases the volume, or
selects the next (+) or previous (–) channel
when the Programme Up/Down
notification is displayed by pressing the
CH/INPUT button.
• Moves the selected input source up/down
when the input select menu is displayed
by pressing the CH/INPUT button.
7GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
GB
Parts and Controls
2
• Receives signals from the remote control.
Do not put anything over the sensor.
Doing so may affect its function.
• Lights up in amber when the [Sleep Timer]
or [On Timer] is set (page 22), or the TV is
in Photo Frame Mode (page 15).
• Lights up in green when [Power Saving] is
set to [Picture Off] (page 24).
• Lights up in green when the TV is turned
on.
• Does not light up when the TV is in
standby mode.
• Flashes while the remote control is being
operated.
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\030PAR.fm
masterpage: Left
Device Control:
Use the [Device Control] to operate
equipment that is compatible with BRAVIA
Sync Control. Select options from [Home
(Menu)], [Options], [Content List] and [Power
Off] to operate the equipment.
Remote Control
* The remote control shape, location, availability and
function of remote control button may vary
depending on your region/country/TV model.
Speakers:
Select [TV Speakers] or [Audio System] to
output the TV’s sound from the TV speakers
or connected audio equipment.
TV Control:
Use the [TV Control] menu to operate the TV
from the [Home (Menu)] or [Options] menu.
Return to TV:
Select this option to return to TV
programme.
 Number buttons
• Select channels. For channel numbers 10
and above, enter the next digit quickly.
• In text mode, enter the three digit page
number to select the page.

(Wide Mode)
Adjusts the screen display. Press repeatedly
to select the desired wide mode (page 13).
 Colour buttons
Displays operation guide (when colour
buttons are available).
 NETFLIX* (Only on limited region/
country/TV model)
Accesses the “NETFLIX” online service.

/
(Info / Text reveal)
• Displays information. Press once to
display information about the
programme/input you are viewing. Press
again to remove the display from the
screen.
• In text mode, reveals hidden information
(e.g. answers to a quiz).
 SLEEP

/
(Input select / Text hold)
• Displays and selects the input source.
• In text mode, holds the current page.
 SYNC MENU
Press repeatedly until the TV displays the
time in minutes ([Off]/[15 min]/[30 min]/
[45 min]/[60 min]/[90 min]/[120 min]) that
you want the TV to remain on before
shutting off. To cancel the sleep timer, press
SLEEP repeatedly until [Off] appears.
Press to display the BRAVIA Sync Menu and
then select connected HDMI equipment
from [Device Selection].
The following options can be selected from
BRAVIA Sync Menu.
8GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\030PAR.fm

////
masterpage: Right
 OPTIONS
(Item select / Enter)
• Select or adjust items.
• Confirm selected items.
Displays a list that contains shortcuts to
some setting menus.
The listed options vary depending on the
current input and content.
 RETURN
• Returns to the previous screen of any
displayed menu.
• Stops playback when playing photo/
music/video file.

(Jump)
Returns to the previous channel or input
viewed more than 15 seconds.
 HOME
 PROG +/–/
Displays or cancels the menu.
/
GB
  +/– (Volume)
Adjust the volume.
 AUDIO
  (Mute)
Select the sound of multilingual source or
dual sound for the programme current
being viewed (Depend on programme
source).
Mutes the sound. Press again to restore the
sound.
Hint
• The number 5, , PROG + and AUDIO buttons have
tactile dots. Use the tactile dots as references when
operating the TV.
 //////
• Operate media contents on TV and
connected BRAVIA Sync-compatible
device.
• This key also can be used to operate VOD
(Video on demand) sevice playback.
Availability is depend on VOD service.
(except KLV-32R412D)

*
Replays the scene/briefly fast forwards the
scene.
 / (TV standby)
Turns the TV on or switches to standby
mode.
  (Text)
In text mode, displays Text broadcast.
Each time you press , the display changes
cyclically as follows:
Text  Text over the TV picture (mix mode) 
No Text (exit the Text service)

Exit Text mode, or switches to a TV display
when displaying external input.
9GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
Parts and Controls
• Selects the next (+) or previous (–)
channel.
• In text mode, selects the next ( ) or
previous ( ) page.
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\040CTI.fm
Connecting TV to the Internet
(except KLV-32R412D)
Setting up the Internet
Connection
To use the network features of your TV it needs
to be connected to the Internet. The set-up
procedure differs depending on the type of
network and LAN router. Before setting up the
Internet connection, be sure to set up a LAN
router. Check your wireless LAN environment
using the following chart.
Wireless LAN
Secure Wireless LAN?
Type 1: Secured network with Wi-Fi
Protected Setup™ (WPS)
The WPS standard makes security of a wireless
home network as straightforward as pressing
the WPS button on the wireless LAN router.
Before setting up a wireless LAN, check the
location of the WPS button on the router and
verify how to use it.
For security purpose, [WPS (PIN)] provides a PIN
code for your router. PIN code is renewed every
time you select [WPS (PIN)].
1
Press HOME, then select [Settings] 
[System Settings]  [Set-up] 
[Network]  [Network Set-up].
2
IP Address setting/Proxy server:
NO
k Type 3
– automatic setting:
[Set up network connection]  [Easy]
– manual setting:
[Set up network connection]  [Expert] 
[Wired Set-up] or [Wireless Set-up]
YES m
Do you use a wireless LAN
router compatible with Wi-Fi
Protected Setup™ (WPS)?
NO
k Type 2
masterpage: Left
3
YES m
Type 1*
Select [WPS (Push Button)] for Push
Button method or [WPS (PIN)] for PIN
method.
Note
Button name of the WPS may differ depending on
the router (e.g. AOSS button).
Wired LAN , Type 4
* Type 1 is easier to set up if your router has an
automatic setting button, e.g. Air Station One-Touch
Secure System (AOSS). Most of the latest routers have
this function. Check your router.
Type 1: Follow the configuration for Secured
network with Wi-Fi Protected Setup™
(WPS).
Type 2: Follow the configuration for Secured
network without Wi-Fi Protected
Setup™ (WPS).
Type 3: Follow the configuration for Unsecured
network with any type of wireless
LAN router.
Type 4: Follow the configuration for Wired
network set-up.
4
Follow the instructions on the set-up
screen.
Note
• If you use WPS for network set-up, the security
settings of the wireless LAN router activate, and any
equipment previously connected to the wireless LAN
in a non-secure status will be disconnected from the
network.
In this case, activate the security settings of the
disconnected equipment and then reconnect. Or, you
can deactivate the security settings of the wireless
LAN router, and then connect the equipment to a TV
in a non-secure status.
• To use the network with IPv6, select [Settings] 
[System Settings]  [Set-up]  [Network] 
[IPv6/IPv4 Priority]  [IPv6], then select [Easy] in
[Set up network connection].
• When IPv6 is selected, HTTP Proxy cannot be set.
10GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\040CTI.fm
Type 2: Secured network without Wi-Fi
Protected Setup™ (WPS)
Type 3: Unsecured network with any
type of wireless LAN router
To set up a wireless LAN, SSID (wireless network
name) and security key (WEP or WPA key) will be
required. If you do not know them, consult the
instruction manual of your router.
1
2
masterpage: Right
Press HOME, then select [Settings] 
[System Settings]  [Set-up] 
[Network]  [Network Set-up].
To set up a wireless LAN, SSID (wireless network
name) will be required.
1
Press HOME, then select [Settings] 
[System Settings]  [Set-up] 
[Network]  [Network Set-up].
2
IP Address setting/Proxy server:
– automatic setting:
[Set up network connection]  [Easy]
– manual setting:
[Set up network connection]  [Expert] 
[Wired Set-up] or [Wireless Set-up]
3
3
Select [Scan], then select a network from
the list of scanned wireless networks.
Select [Scan], then select a network from
the list of scanned wireless networks.
4
4
Follow the instructions on the set-up
screen.
Follow the instructions on the set-up
screen.
Note
Note
• To use the network with IPv6, select [Settings] 
[System Settings]  [Set-up]  [Network] 
[IPv6/IPv4 Priority]  [IPv6], then select [Easy] in
[Set up network connection].
• When IPv6 is selected, HTTP Proxy cannot be set.
• Please make sure your surrounding is secure when
you key in your password.
• Security key (WEP or WPA key) will not be required
because you do not need to select any security
method in this procedure.
• To use the network with IPv6, select [Settings] 
[System Settings]  [Set-up]  [Network] 
[IPv6/IPv4 Priority]  [IPv6], then select [Easy] in
[Set up network connection].
• When IPv6 is selected, HTTP Proxy cannot be set.
Type 4: Wired network set-up
Enter the respective alphanumeric values for
your router if necessary. The items that need to
be set (e.g. IP Address, Subnet Mask, DHCP)
may differ depending on the Internet service
provider or router. For details, refer to the
instruction manuals provided by your Internet
service provider, or those supplied with the
router.
1
Press HOME, then select [Settings] 
[System Settings]  [Set-up] 
[Network]  [Network Set-up].
2
IP Address setting/Proxy server:
– automatic setting:
[Set up network connection]  [Easy]
– manual setting:
[Set up network connection]  [Expert] 
[Wired Set-up] or [Wireless Set-up]
3
Follow the instructions on the set-up
screen.
11GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
GB
Connecting TV to the Internet
– automatic setting:
[Set up network connection]  [Easy]
– manual setting:
[Set up network connection]  [Expert] 
[Wired Set-up] or [Wireless Set-up]
IP Address setting/Proxy server:
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\040CTI.fm
[Network Set-up] can also be set from [Auto
Start-up] menu.
Note
• Allows automatic configuration of your wired/
wireless network.
When connecting with LAN cable: Wired
When connecting with built-in Wireless LAN:
Wireless
When connecting with both of the cables: Wired
• Set to [Easy], sets the IP address automatically. For
proxy server is not use.
• To use the network with IPv6, select [Settings] 
[System Settings]  [Set-up]  [Network] 
[IPv6/IPv4 Priority]  [IPv6], then select [Easy] in [Set
up network connection].
• When IPv6 is selected, HTTP Proxy cannot be set.
masterpage: Left
If You Cannot Connect to the
Internet
Use the diagnosis to check possible causes for
network connection failures, and settings.
1
Press HOME, then select [Settings] 
[System Settings]  [Set-up] 
[Network]  [Network Set-up].
2
Select [View Network setting and
status].
3
Select [Check Connection].
This may take several minutes. You cannot
cancel the diagnosis after selecting [Check
Connection].
Preparing a Wired Network
TV
Privacy Policy
Internet
Modem
with
router
functions
or
Router
When you use the following functions to
connect to the Internet, certain information will
be sent to Sony Corporation’s global servers,
which is considered to be personal information,
and requires your agreement in order for service
providers to use it.
• System software updates by connecting to
Sony Corporation’s global servers via the
Internet.
• Internet contents or other Internet services
from service providers like Youtube.
Modem
Internet
Note
• For LAN connections, use a Category 7 cable (not
supplied).
Viewing the Network Status
You can confirm your network status.
1
Press HOME, then select [Settings] 
[System Settings]  [Set-up] 
[Network]  [Network Set-up].
2
Select [View Network setting and
status].
This TV has the setting screens in Auto Start-up
or Setting Menu to confirm your agreement to
this after you read the detail of the Privacy
Policy. If you want to use these functions, please
check [Agree] in each setting screen. If
[Disagree] is checked, the above two functions
are not available. However, even in this case, if
[ON] is selected at [Automatic Software
Download] in Auto Start-up or Setting Menu, the
system software updating is available.
You can change this setting by pressing HOME,
then select [Settings]  [System Settings] 
[Set-up]  [Privacy Policy].
12GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\050WAT.fm
Watching TV
1
Press / on the TV or / on the
remote control to turn on the TV.
2
Press the number buttons or PROG +/–
to select a TV channel.
3
Press  +/– to adjust the volume.
masterpage: Right
Changing the Viewing Style
Changing the Wide Mode
1
Press
mode.
repeatedly to select the wide
[Wide Zoom]*
[Normal]
[Full]
[Zoom]*
GB
For HDMI PC Input (PC timing)
[Normal]
[Full 1]
[Full 2]
Setting Scene Select
1
2
Press OPTIONS.
Press / then
to select [Scene
Select].
When you select the desired scene
option, the optimum picture and sound
quality for selected scene are
automatically set. The options you can
select may vary. Unavailable options are
greyed out.
13GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
Watching TV
* Parts of the top and bottom of the picture may
be cut off.
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\060NHM.fm
Navigating through Home Menu
The HOME button allows you to access a variety
of TV settings and features.
masterpage: Left
Photo Sharing Plus
(except KLV-32R412D)
Connect, view and save favourite photos on TV
using your devices (eg. smartphones or tablets).
HOME  [All Apps]  [Photo Sharing Plus]
Note
All Apps
Internet Contents delivers a variety of ondemand entertainment straight to your TV. You
can enjoy your favorite internet content (except
KLV-32R412D), Photo Sharing Plus (except
KLV-32R412D), Photo Frame Mode and FM
Radio.
Note
• Follow the instructions on the screen to connect your
device to the TV.
• Open web browser on device after all connections are
established, then follow the instructions on the
screen to access the URL.
To display photo on TV
1
2
• Be sure to connect your TV to the Internet and
complete [Network Set-up] (page 21).
Tap on your device to start.
Select a photo.
The selected photo will be displayed
automatically on TV.
To use Internet Contents
To save a photo displayed on TV
1
2
Press HOME, then select [All Apps].
1
Press /// to select the desired
internet service in service list and press
.
Tap thumbnail on your device, then hold
the photo to open the context menu.
2
Select [OK].
3
Press
to launch the desired internet
contents.
To exit Internet Contents
Press HOME.
Note
• If you experience difficulties with this feature, check
that the Internet connection is set up properly.
• The interface to Internet content depends on the
Internet content providers.
• To update Internet Contents services, Press HOME,
then select [Settings]  [System Settings]  [Set-up]
 [Network]  [Refresh Internet Content].
Note
• Connect a USB flash drive to store up to 50 photos.
• Up to 10 smartphones or tablets can be connected to
the TV at the same time.
• Maximum file size of each photo is 20 MB.
• You can also throw a background music with a
maximum file size of 30 MB.
• The default browser for Android 2.3 or later is
supported.
• The default browser for iOS is supported; however,
some functions cannot be used depending on the
version of your iOS.
To use NETFLIX
Press NETFLIX button on the remote control to
launch menu.
Note
• It is possible that Netflix cannot be used via a Proxy
server.
14GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\060NHM.fm
Using the TV as a Photo Frame Mode
masterpage: Right
Listening to FM Radio
Photo Frame Mode displays the clock and
calendar at the same time as displaying a
photo, and listening to music or FM radio.
HOME  [All Apps]  [FM Radio]
HOME  [All Apps]  [Photo Frame Mode]
• Press PROG +/– to select an FM radio station.
• Press RETURN to exit FM Radio mode.
Note
Presetting Radio Stations
When you use FM Radio function for the first
time, press HOME and select [Settings] 
[System Settings]  [Channel Set-Up]  [FM
Radio Set-up]  [Auto Tuning].
To change preset radio stations
To launch Photo Frame Mode while
playback USB media
Press OPTIONS while playback a photo
or music file.
2
Press / then
to select [Photo
Frame Mode] to launch Photo Frame.
To select Display mode
You can change the Photo Frame Mode display
by selecting [Display Mode] in the [Photo Frame
Settings] (page 22).
To select Clock Display mode
You can select among three clock display
modes by selecting [Clock Display] in the [Photo
Frame Settings] (page 22).
Press OPTIONS in FM Radio mode.
3
Press / then
to select the radio
station you want to change.
4
Press / then
to change the FM
frequency then to edit FM Radio station
name.
Press / then
Presets].
to select [FM Radio
Note
• If the station has a noisy sound, you may be able to
improve the sound quality by pressing /.
• When an FM stereo programme has static noise, press
AUDIO until [Mono] appears. There will be no stereo
effect, but the noise will be reduced.
Note
• This TV does not have a battery powered backup for
the clock. If there is a power failure or if you
disconnect the power cord, the current date and time
will reset automatically.
Duration
To save power, the TV continually plays back in
Photo Frame Mode for up to 24 hours before
powering off automatically. After automatic
power off, do not use Photo Frame Mode for at
least one hour to avoid panel burn-in.
You can change the setting of the [Duration] in
the [Photo Frame Settings] (page 22).
To avoid panel burn-in, the position of the
photo, clock and calendar are switched
automatically every hour.
15GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
GB
Navigating through Home Menu
1
1
2
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\060NHM.fm
Favourites
Media
The Favourite feature allows you to specify up 18
channels of your favourite programmes.
1
2
3
Press HOME.
Press / then
Press / then
programme.
masterpage: Left
to select [Favourites].
to select a
Playback Photo/Music/Video via USB
You can enjoy photo/music/video files stored in
a Sony digital still camera or camcorder through
a USB cable or USB storage device on your TV.
1
Connect a supported USB device to the
TV.
2
3
4
Press HOME.
Press / then
to select [Media].
Press / then
to select [Photo],
[Music] or [Video].
5
[Device Selection] appears. Press /
then
to select a device (except
KLV-32R412D).
6
Press /// then
or folder.
7
If more than one USB device is
connected, press the red button to
select [Playback Options] then [Device
Selection] to select the appropriate USB
device (KLV-32R412D only).
to select a file
Playback Options
Press the red button in thumbnail view to
display the list of USB playback settings.
To adjust the picture and sound quality of
USB media
Press OPTIONS during media playback then
select [Picture] or [Sound].
Note
• Press /// then
to select and adjust an item.
To play a photo as a slideshow (Photo)
1
Press the green button in thumbnail
view to start slideshow.
To set [Slideshow Effect] and [Slideshow
Speed], press OPTIONS  [Playback
Options].
To stop a slideshow, press RETURN.
16GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\060NHM.fm
Note
• While the TV is accessing the data on a USB device,
observe the following:
 Do not turn off the TV.
 Do not disconnect the USB cable.
 Do not remove the USB device.
The data on the USB device may be damaged.
• Sony will not be held liable for any damage to, or loss
of, data on the recording media due to a malfunction
of any connected devices or the TV.
• The file system on the USB device supports FAT16,
FAT32 and NTFS.
• The file name and folder name may not display
correctly in some cases.
• When you connect a Sony digital still camera, set the
camera’s USB connection mode to Auto or Mass
Storage. For more information about USB connection
mode, refer to the instructions supplied with your
digital camera.
• Use a USB storage device that is compliant with USB
mass storage device class standards.
• If a selected file has incorrect container information,
or is incomplete, it cannot be played back.
USB Video format
Video Codec: MPEG1, MPEG2, Xvid, MPEG4,
H.264, Motion JPEG
Audio Codec: PCM, MPEG1 Layer1/2, MPEG2
AAC (2ch), MPEG4 AAC (2ch),
MPEG4 HE-AAC (2ch), Dolby
Digital (2ch), Dolby Digital Plus
(2ch) (except KLV-32R412D),
WMA v8, MP3
• WebM (.webm)
Video Codec: VP8
Audio Codec: VORBIS
• PS (.mpg, .mpeg, .vro, .vob)
Video Codec: MPEG1, MPEG2
Audio Codec: MPEG1 Layer1/2, MP3, Dolby
Digital (2ch), Dolby Digital Plus
(2ch) (except KLV-32R412D),
DTS, DTS 2.0
• TS (.ts, .m2ts)
Video Codec: MPEG2, H.264, VC-1
Audio Codec: MPEG1 Layer1/2, MP3, MPEG2
AAC, MPEG4 AAC, MPEG4 HEAAC, Dolby Digital, Dolby
Digital Plus (2ch) (except
KLV-32R412D), DTS, DTS 2.0
USB Music format
• LPCM (.wav)
• MPEG1 audio layer3 (.mp3)
• WMA V8 (.wma)
GB
USB Photo format
• JPEG (.jpg, .jpeg)
Note
• Playback of the above file formats is not guaranteed.
Home Network
• ASF (.wmv, .asf)
(except KLV-32R412D)
Video Codec: WMV v9, Xvid, VC-1
Audio Codec: MP3, WMA v8
Connecting to a Home Network
• MP4 (.mp4, .mov, .3gp)
Video Codec: MPEG4, H.264, H.263, Motion
JPEG
Audio Codec: MPEG1 Layer1/2, MP3, MPEG2
AAC, MPEG4 AAC, MPEG4 HEAAC
You can enjoy various content (e.g. photo/
music/video files) stored on DLNA Certified™
media servers. The home network feature
allows you to enjoy network content in other
rooms.
• MKV (.mkv)
Video Codec: WMV v9, MPEG4, H.264, VC-1,
VP8
Audio Codec: PCM, MPEG1 Layer1/2, MP3,
MPEG2 AAC (2ch), MPEG4 AAC
(2ch), MPEG4 HE-AAC (2ch),
Dolby Digital (2ch), WMA v8,
Dolby Digital Plus (2ch) (except
KLV-32R412D), DTS, DTS 2.0,
VORBIS
Playing Photo/Music/Video
1
Press HOME, then select [Media] 
[Photo], [Music] or [Video]  the
desired media server.
2
Select files or folders to play from the
list.
17GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
Navigating through Home Menu
• AVI (.avi)
masterpage: Right
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\060NHM.fm
masterpage: Left
Note
• The server is required to be DLNA Certified™.
• Files from a network device need to be in the
following formats:
Still images: JPEG
Music: MP3, linear PCM, WMA
Video: AVCHD, MPEG2, MPEG1, MP4 (AVC), MP4
(MPEG4), WMV
• Depending on the file, playback may not be possible
even when using the supported formats.
Settings
System Settings
Note
• The options you can adjust vary depending on the
situation. Unavailable options are greyed out or not
displayed.
Renderer
You can play back photo, music and video files
stored in network devices (e.g. digital still
cameras, mobile phones, PC) on the TV screen
by directly operating the target device. The
network should also be renderer-compatible
devices.
Renderer settings
Press HOME, then select [Settings]  [System
Settings]  [Set-up]  [Network]  [Home
Network Setup]  [Renderer].
Display Settings for Media Servers
Select home network servers to be displayed in
the Home Menu. Up to 10 servers can be
displayed.
1
2
Press HOME, then select [Settings] 
[System Settings]  [Set-up] 
[Network]  [Home Network Setup] 
[Server Display Settings].
Select the server to display in the Device
Selection.
Picture
Picture Mode
Sets a picture mode.
Reset
Resets all the [Picture] settings except
[Picture Mode] and [Intelligent Picture
Plus] to the default settings.
Backlight
Adjusts the brightness of the backlight.
Picture
Increases or decreases picture contrast.
Brightness
Brightens or darkens the picture.
Colour
Increases or decreases colour intensity.
Hue
Increases or decreases the green tones
and red tones.
Colour Temperature
Adjusts the whiteness of the picture.
Sharpness
Sharpens or softens the picture.
Reality Creation
Adjusts fineness and noise for realistic
picture.
Resolution: Adjusts fineness and
clarity. Select [Manual] to adjust the
reality creation.
Noise Reduction
Reduces the picture noise (snowy picture)
in a weak broadcast signal.
18GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\060NHM.fm
MPEG Noise Reduction
Reduces the picture noise in MPEGcompressed video.
Cinema Drive
Provides improved picture movement
when playing BD (Blu-ray Disc), DVD or
VCR images taken on film. Select [Auto] to
represent original film-based content as it
is.
Note
• If the image contains irregular signals or too
much noise, [Cinema Drive] is automatically
turned off even if [Auto] is selected.
Advanced Settings
Sets [Picture] settings in more detail.
Reset: Resets all the advanced settings
to the default settings.
Black Corrector: Enhances black areas
of the picture for stronger contrast.
Gamma: Adjusts the balance between
bright and dark areas of the picture.
Sound
Sound Mode
Select according to content you want to
enjoy.
Reset
Reset [Equaliser], [Clear Voice], [Intelligent
Volume], [Balance] and [Volume Offset]
settings.
Equaliser
Adjusts sound frequency settings.
Clear Voice
Makes voices sound clearer.
Intelligent Volume
Minimizes the difference in volume level
between all programmes and adverts.
Balance
Emphasises left or right speaker balance.
Volume Offset
Adjusts the volume level of the current
input relative to other inputs.
Clear White: Emphasises white colours.
Dual Sound
Live Colour: Makes colours more vivid.
Sets the sound from the speaker to
[Mono], [Stereo], [Main] or [Sub].
LED Motion Mode: Reduces blur in
movies by controlling the LED
backlight source, but the brightness
decreases.
Intelligent Picture Plus Set-up
Intelligent Picture Plus: Enhances
picture quality according to preferred
settings, channel or video input.
Signal Level Indicator: When [On] is
selected, the signal level bar will be
displayed when you select analogue
channel or video input.
Note
• If the signal is very weak, the sound becomes
monaural automatically.
• If the stereo sound is noisy when receiving a
NICAM programme, select [Mono]. The sound
becomes monaural, but the noise is reduced.
• The [Dual Sound] setting is memorized for
each programme position.
• You cannot listen to stereo broadcast sound
when [Mono] is selected.
Hint
• If you select other equipment connected to the
TV, set [Dual Sound] to [Stereo], [Main] or [Sub].
Picture Optimisation: Allows you to
enhance the picture to your preferred
settings.
19GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
GB
Navigating through Home Menu
Adv. Contrast Enhancer: Automatically
adjusts [Backlight] and [Picture] to
the most suitable settings for dark
images scenes.
masterpage: Right
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\060NHM.fm
masterpage: Left
Advanced Settings
Horizontal Shift
Dynamic Range: Compensates for
differences in the audio level
between different channels.
Adjusts the horizontal position of the
picture.
Note
Vertical Shift
• The effect may not function or may vary
depending on the programme regardless of
the [Dynamic Range] setting.
Adjusts the vertical position of the picture.
Dolby Digital Plus Out (except
KLV-32R412D): Select [Auto] to pass
through Dolby Digital Plus stream to
ARC when Dolby Digital Plus is
available through connected Audio
System.
During Dolby Digital Plus stream is
output, Digital Audio Out (optical)* is
muted.
Select [Off] to convert Dolby Digital
Plus stream to Dolby Digital for both
ARC (Audio system) and Digital Audio
Out (optical)*.
Adjusts the vertical size of the picture
when [Wide Mode] is set to [Wide Zoom].
HE-AAC Audio Level: Adjust the HEAAC audio sound level.
Auto Tuning
MPEG Audio Level: Adjusts the MPEG
audio sound level.
* Only on limited region/country/TV model.
Screen
Wide Mode
For details about wide mode, see page 13.
Auto Wide
Automatically changes the wide mode
according to the input signal from an
external equipment.
4:3 Default
Sets the default [Wide Mode] for a 4:3
input signal.
Vertical Size
PC Settings
Adjusts the picture size, see page 13.
Channel Set-up
1 Digit Direct
When [1 Digit Direct] is set to [On], you can
select a channel using one preset number
button (0 - 9) on the remote control.
Tunes in all the available channels
Programme Sorting
Changes the order in which the channels
are stored on the TV.
Programme Labels
Assign a channel name of your choice up
to seven letters or numbers.
Manual Programme Preset
Before selecting [Channel]/[AFT]/[Audio
Filter]/[Skip]/[Colour System], press
PROG +/– to select the programme
number with the channel. You cannot
select a programme number that is set to
[Skip:] (page 21).
Programme/TV System: Presets
programme channels manually.
Auto Display Area
Channel: Selects a channel number.
Select [On] to automatically adjusts the
display area based upon the content or
[Off] to choose from the [Display Area]
options.
AFT: Allows you to fine-tune the
selected channel manually. When
[On] is selected, the fine tuning is
performed automatically.
Display Area
Adjusts the picture display area.
20GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\060NHM.fm
Audio Filter: Improves the sound of
individual channels when distortion
occurs in mono broadcasts in TV
system [B/G], [I] and [D/K].
Note
• You cannot receive stereo or dual sound
when [Low]/[High] is selected.
Skip: Skips unused channels.
Colour System: Select the colour
system according to the channel.
Signal Level: Displays the signal level
for programme currently being
watched.
FM Radio Set-up
Presets up to 30 FM radio stations that can
be received in your area.
FM Radio Presets: Allows you to
manually tune and store each
available channel one at a time.
Note
• To enable this feature, access to FM Radio
mode by using Home (Menu) (page 15), then
preset your desired FM radio stations
according to the steps mentioned above.
Parental Lock
PIN Code
Sets a PIN code. Use 0-9 on the remote
control to enter a four-digit PIN code.
Change PIN Code
Select to change your PIN code.
Programme Block
Locks a channel from being watched. To
view a blocked channel, select
[Unblocked].
External Input Lock
Locks an external input from being
watched. To view a blocked external input,
select [Unblocked].
Note
• Entering the correct PIN code for blocked
channel or external input will temporarily
deactivates the [Parental Lock] feature. To
reactivate the [Parental Lock] settings, turn off
and on the TV.
Hint
• If you lost your PIN code, see page 34.
Internet Lock (except KLV-32R412D)
Locks internet contents from being
watched. To view a internet contents,
select [Unblocked].
GB
Set-up
Network (except KLV-32R412D)
Network Set-up: Sets the network
status settings.
IPv6/IPv4 Priority: Switch between
[IPv6] and [IPv4 (Recommended)].
Note
• To use the network with [IPv6], select [IPv6],
then select [Easy] in [Set up network
connection].
• When IPv6 is selected, HTTP Proxy cannot
be set.
• When IPv6 is selected, some Internet
browser sites, applications or content
cannot be watched.
Built-in Wi-Fi: Turns the built-in
wireless LAN [On] or [Off].
Set to [Off], if you do not use the
built-in wireless LAN.
When you switch from [Off] to [On],
make the settings in [Network
Set-up].
Wi-Fi Direct: Turns on/off to connect
your TV with Wi-Fi Direct device such
as PC, mobile phone or digital
camera.
21GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
Navigating through Home Menu
Auto Tuning: Allows you to
automatically tune and store all the
available channels.
masterpage: Right
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\060NHM.fm
masterpage: Left
Wi-Fi Direct Settings: Set to connect a
Wi-Fi direct device to the TV using
the Wi-Fi Direct function. If you
cannot connect, press OPTIONS key
and select [Manual].
Image Selection: Select image.
Device Name: Change the name of the
TV shown on the connected device.
Music Playback Setting: Select from
listening to all tracks or a single
music track.
Refresh Internet Content: Connect to
the internet to receive available
Internet content services.
Home Network Setup:
Music Selection: Select music.
Slideshow Setting: Select from
showing slideshow mode or single
view photo.
Duration: Select the time period after
which the TV automatically switches
to standby mode.
Server Display Settings
Displays the connected server list. You
can select the server to display in the
Device Selection.
Server Diagnostics
Diagnoses whether the TV can connect
to each server on the home network.
Remote Start
This feature allow connected device in
the home network to turn on the TV.
USB Auto Start
Note
Clock/Timers
• The standby power consumption will
increase if [On] is set.
Sets the timer and clock.
Renderer
Renderer Function
Enables the TV to play media files on a
device (e.g. digital still camera).
Renderer Access Control
Allows access from a specified control
device.
Renderer Set-up
Adjusts the [Renderer Set-up] detailed
settings.
Sleep Timer: Sets the time in minutes
that you would like the TV to remain
on before shutting off automatically.
Privacy Policy (except KLV-32R412D)
Select [Agree] or [Disagree] for Privacy
Policy confirmation. (page 12)
Photo Frame Settings
Display Mode: Allows you to select the
display mode. See page 15.
Clock Display: Allows you to select the
clock display.
Note
• This option is available when [Display
Mode] is set to [Image and Clock] or [Full
Screen Clock].
Audio Application: Sets [FM Radio],
[Music] or [Off] as audio application.
First day of the week: Sets [Sunday] or
[Monday] as the first day of the week
on the calendar.
When USB device is connected to the USB
port, select [On] to automatically view the
thumbnail of the last played Photo/
Music/Video.
On Timer: Turns on the TV from
standby mode at a time you set, and
tuned to a channel or input of your
preference. Before setting this
function, make sure you set the
correct current time.
Clock Set: Sets the current time and
date.
Date
Set current date.
Time
Set Current Time.
Auto Start-up
Starts the initial set-up procedure. This
option allows you to retune the TV after
moving houses, or to search for new
channels that have been launched by
broadcasters.
Language
Select the language in which the menus
are displayed.
22GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\060NHM.fm
Start-up Logo
Select [On] to display the logo when the
TV is turned on. Select [Off] to disable it.
LED Indicator
Select [On] to light up the LED indicator.
Select [Off] to disable it.
AV Set-up
Video Labels: Assigns name to external
equipment input.
Colour System: Selects the colour
system according to the composite
video signal from the input source.
Video/Component Input: Select [Auto]
to have the TV detect and switch
between the component video jack
or the video jack
when
component video jack
or video
jack
is connected.
Note
• You cannot use the component video jack
and the video jack at the same time.
Speakers: Select sound output from
the TV speakers or external audio
equipment.
Headphone/Audio Out: Sets the sound
output to headphone, external audio
systems or Active Subwoofer
connected to the TV. Disconnect
headphone from the TV when you
select [Audio Out] or [Subwoofer].
Headphone Speaker Link: Switches the
TV’s internal speakers on/off when
you connect headphone to the TV.
Headphone Volume: Adjusts the
volume of the headphone.
Note
• This option is not available, when
[Headphone/Audio Out] is set to [Audio
Out] or [Subwoofer].
Audio Out:
Variable: When using an external
audio system, volume output from
audio out can be controlled using the
TV’s remote control.
Fixed: The audio output of the TV is
fixed. Use your audio receiver’s
volume control to adjust the volume
(and other audio settings) through
your audio system.
Hint
• This option is only available when
[Headphone/Audio Out] is set to [Audio
Out].
Digital Audio Out: Sets the audio signal
that is output by connecting using
HDMI cable. Set to [Auto], when
connecting equipment compatible
with Dolby Digital or DTS. Set to
[PCM], when connecting equipment
not compatible with Dolby Digital or
DTS.
TV Position: Improves the speaker
settings when set as [Table-Top
Stand] or [Wall Mount] according to
your TV’s position.
BRAVIA Sync Settings
Allows the TV to communicate with
equipment that is compatible with the
BRAVIA Sync Control function, and
connected to the HDMI ports of the TV.
Note that communication settings must
also be made on the connected
equipment.
BRAVIA Sync Control: Sets whether or
not to link the operations of the TV
and the connected equipment that is
compatible with BRAVIA Sync
Control. When set to [On], the
following functions are available. If
the specific Sony equipment that is
compatible with BRAVIA Sync Control
is connected, this setting is applied
to the connected equipment
automatically.
Auto Devices Off: When set to [On], the
connected equipment that is
compatible with BRAVIA Sync Control
turns off when your TV goes to
standby mode.
23GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
GB
Navigating through Home Menu
Enable: Select [Auto] to display names
only when the equipment is connected,
or [Always] to display regardless of
connection status.
Label Inputs: Uses one of the preset
labels to assign a name to connected
equipment. Select [Edit] to creates your
own label.
masterpage: Right
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\060NHM.fm
Auto TV On: When set to [On], the TV
turns on when you turn on the
connected equipment that is
compatible with BRAVIA Sync
Control.
BRAVIA Sync Device List: Displays a list
of connected equipment that is
compatible with BRAVIA Sync
Control. Select [Enable] to update the
[BRAVIA Sync Device List].
Device Control Keys: Select button
functions of the TV’s remote control
to operate the connected
equipment.
None
Deactivates the control by the TV’s
remote control.
Normal
For basic operations, such as navigation
buttons (up, down, left or right, etc).
Tuning Keys
For basic operations and operation of
channel-related buttons, such as
PROG +/– or (0-9), etc. Useful when
you control a tuner or set-top box,
etc; via the remote control.
Menu Keys
For basic operations and operation of
the HOME/OPTIONS buttons.
Useful when you select menus of a BD
player, etc; via the remote control.
Tuning and Menu Keys
For basic operations and operation of
channel-related buttons and HOME/
OPTIONS button.
Note
• Some equipment with [BRAVIA Sync
Control] does not support the [Device
Control Keys] feature.
Customer Support
Provides information of your TV’s model,
software, and others. For details, see
page 24.
masterpage: Left
Eco
Reset
Resets the current Eco settings to the
default values.
Power Saving
Reduces power consumption of the TV by
adjusting the backlight.
When you select [Picture Off], the picture
is switched off. The sound remains
unchanged.
Idle TV Standby
Turns the TV off after it has been kept idle
for the preset length of time.
Customer Support
Model Name
Displays model name of your TV.
Software Version
Displays current software version of your TV.
External Inputs
View Video Labels: Allows you to view or
manage the TV and external inputs.
Picture Check
View Test Picture: Allows you to check the
picture condition on the display.
Software Update
Updates the TV system using USB memory or
via Network.
Note
• Software update via the internet may vary
depending on your region/country/TV model.
• To update the software, please visit Sony support
website.
24GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\060NHM.fm
masterpage: Right
Automatic Software Download
(except KLV-32R412D)
Select [On] to download the software
automatically. Select [Off] to disable it.
Note
• Internet browser function will be available by
software update within mid of 2016. Make sure your
TV is connected to the internet. If you do not have a
network connection, you will be able to download
the software from the Sony support website using
your PC. Any data charge related to the connection
of internet may apply and must be borne you.
Factory Settings
Resets all settings to factory settings. After
completing this process, the initial set-up
screen is displayed.
Note
• Be sure not to turn the TV off during this period (it
takes about 30 seconds) or press any buttons.
GB
Navigating through Home Menu
Initialize Personal Information (except
KLV-32R412D)
You can erase your personal information
stored in the TV.
Product Information
Displays your TV’s product information.
25GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\070OPT.fm
masterpage: Left
Viewing Pictures from Connected Equipment
Connection Diagram
You can connect a wide range of optional equipment to your TV.
Note
• Depending on TV model, connecting a large USB device may interfere with other connected devices beside it.
*2
Home
Audio
System with
ARC/HDMI
Device
Digital still
camera/
Camcorder/USB
storage media
*1
*1
HDMI Device
VCR/Video game equipment/
DVD player/Camcorder
*3
*1
Headphone/
Home Audio
System/
Subwoofer
< 12 mm
< 21 mm
*2 Terminals and labels may vary
depending on country/region/TV
model.
*2
*3 Supports 3-pole stereo mini jack
only.
Router
DVD player with component output
Picture Quality
• AV composite cable
• Antenna (aerial) cable
• Component cable
SD
Standard definition (SD) videos have picture signals with a
vertical resolution of 480 (NTSC) or 576 (PAL/SECAM) lines.
• HDMI cable
HD
High definition (HD) videos have picture signals
with a vertical resolution of 720 or 1,080 lines.
26GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\070OPT.fm
Using Audio and Video
Equipment
1 Turn on the connected equipment.
2 Press to display the input source.
3 Press / then to select the desired
masterpage: Right
Using Screen mirroring
(except KLV-32R412D)
Screen mirroring displays the screen of a
compatible device (e.g. smartphones) on your
large TV screen by Miracast technology.
No wireless router (or access point) is required
to use this feature.
input source.
The highlighted item is selected if 5 seconds
pass without any operation.
Note
• When connecting a digital audio system not
compatible with Audio Return Channel (ARC)
technology using an HDMI cable, you need to connect
an optical audio cable to the DIGITAL AUDIO OUT
(OPTICAL)* to output digital sound.
• When connecting with an HDMI cable, be sure to use
HighSpeed HDMI Cable with Cable Type Logo
(Recommended SONY Cable).
• When connecting mono equipment, connect the
audio cable to the L (mono) jack.
To use BRAVIA Sync devices
When connecting the TV to BRAVIA Sync
compatible equipment, you can control them
together.
Be sure to perform the necessary settings in
advance. The BRAVIA Sync Control settings must
be set on both the TV and the connected
equipment. See [BRAVIA Sync Settings]
(page 23) for the settings on the TV side. Refer
to the connected equipment operating
instructions for the settings on the connected
equipment side.
Press the
/
button, then select
[Screen mirroring] using / buttons.
2
Operate the Screen mirroring
compatible device to connect with the
TV. Once connected, the device screen
will be displayed on the TV.
To show connected devices/deregister device
When the waiting screen for the Screen
mirroring is displayed, press OPTIONS, then
select [Show Device List / Delete].
To deregister a device, select the device in the
list to delete, press . Then, select [Yes] in the
confirmation display.
To display registration notification when
attempting to connect a device with the TV
Activating this function can avoid an
unintended device from being connected.
When the standby screen for Screen mirroring is
displayed, press OPTIONS, then select
[Registration Notification]  [On].
Note that once you decline registration request
from a device, you will not be able to connect
the device unless you delete it from the device
list.
To change the band setting (for experts)
When the standby screen for Screen mirroring is
displayed, press OPTIONS, then select [Band
Setting].
Note
• Connecting devices must conform to the following:
Screen mirroring compatible devices:
2.4 GHz connection (5 GHz not supported).
• For information about the supported wireless band of
your device, refer to the instruction manual of your
device.
27GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
GB
Viewing Pictures from Connected Equipment
* Only on limited region/country/TV model.
1
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\080ADD.fm
masterpage: Left
Additional Information
Installing the TV to the Wall
This TV’s instruction manual only shows the steps on preparing the installation of the TV before
installing to the wall.
To Customers:
For product protection and safety reasons, Sony strongly recommends that installation of your TV be
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this
product.
Sufficient expertise is required for installing this product, especially to determine the strength of the
wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall
to Sony dealers or licensed contractors and pay adequate attention to safety during the installation.
Sony is not liable for any damage or injury caused by mishandling or improper installation.
Use the Wall-Mount Bracket SU-WL450 (not supplied) to install the TV to the wall.
When installing the Wall-Mount Bracket, also refer to the Operating Instructions and Installation Guide
supplied with the Wall-Mount Bracket.
Note
• If the Table-Top Stand is attached to the TV, detach the Table-Top Stand beforehand. See the Setup Guide and follow
in reverse order the steps to detach the Table-Top Stand.
• Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth, when
securing the Mounting Hook or when removing the Table-Top Stand from the TV to prevent damaging the surface of
the LCD display.
To detach the Table-Top Stand from the TV
28GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\080ADD.fm
1
masterpage: Right
Make sure that the wall has enough space for the TV and is capable of supporting a
weight of at least four times that of the TV. Refer to the following table on installing the TV
to the wall. See page 35-36 (Specifications) for the TV’s weight.
Standard mounting
Slim mounting
80
Screen centre point
Unit: mm
Display dimensions
Screen centre dimension
Length for mounting
Model Name
KLV-
Standard
mounting
Slim
mounting
1,089
638
14
314
111
69
40W562D
924
546
32
314
111
69
32W562D
32W512D
32R412D
738
441
84
314
111
69
GB
Additional Information
48W562D
Note
• Figures in the table may differ slightly depending on the installation.
• When your TV is installed on the wall, the upper side of the TV slightly leans forward.
29GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\080ADD.fm
2
masterpage: Left
Attach the Attachment parts for Wall-Mount Bracket. Check the Attachment parts by
referring to “1” of the Wall-Mount Bracket Installation Guide.
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
• Be sure to store the unused parts in a safe place for future use. Retain this manual for future reference.
Standard mounting
Screw (+PSW 6 x 20) 
Screw (+PSW 6 x 50) 
Pulley 
Spacer (60 mm) 
Soft cloth
Belt 
Slim mounting
Note
• You cannot use some of the terminals on the rear of the TV when using this mounting style.
Screw (+PSW 6 x 20) 
Screw (+PSW 6 x 20) 
Pulley 
Spacer (20 mm) 
Soft cloth
Belt 
30GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\080ADD.fm
3
masterpage: Right
Connect necessary cables to the TV.
Note
• You cannot access to any terminal after installing the TV to the wall.
4
Install the TV to the Base. Refer to “5” of Installation Guide and “Installing the TV to the
Wall” of Operating Instructions supplied with the Wall-Mount Bracket.
Model Name KLV-
Hook location
48W562D
a
b
c
d
40W562D
32W562D
32W512D
32R412D
c
Refer to the instructions supplied with the Wall-Mount Bracket for your model to install the TV on the wall.
GB
Additional Information
31GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\080ADD.fm
masterpage: Left
 Keep the antenna cable away from other
Troubleshooting
When the LED indicator is flashing red, count
how many times it flashes (interval time is
three seconds).
If the LED indicator flashes red, reset the TV by
disconnecting the AC power cord (mains lead)
from the TV for two minutes, then turn on the
TV.
If the problem persists, contact your dealer or
Sony service centre with the number of times
the LED indicator flashes red (interval time is
three seconds). Press / on the TV to turn it off,
disconnect the AC power cord (mains lead), and
inform your dealer or Sony service centre.
When the LED indicator is not flashing, check
the items as follows.
If the problem persists, have your TV serviced by
qualified service personnel.
connecting cables.
Picture or sound noise when viewing a TV
channel
 Adjust [AFT] (Automatic Fine Tuning) to obtain
better picture reception. This function is for
analogue TV channels only.
Tiny black points and/or bright points appear
on the screen
 The picture of a display unit is composed of
pixels. Tiny black points and/or bright points
(pixels) on the screen do not indicate a
malfunction.
Picture contours are distorted
 Change the current setting of [Cinema Drive] to
other settings (page 19).
No colour on programmes
 Select [Reset] (page 18).
No colour or irregular colour when viewing a
signal from the Y, PB, PR jacks of
/
Picture
No picture (screen is dark) and no sound
 Check the antenna (aerial)/cable connection.
 Connect the TV to the AC power outlet (mains
socket), and press / on the TV or / on the
remote control.
No picture or no menu information from
equipment connected to the video input jack
appears on the screen
 Press
to display the connected equipment
list, then select the desired input.
 Check the connection between the optional
equipment and the TV.
Double images or ghosting
 Check the antenna (aerial)/cable connection,
location or direction.
Only snow and noise appear on the screen
 Check if the antenna is broken or bent.
 Check if the antenna has reached the end of its
serviceable life (three to five years in normal use,
one to two years at the seaside).
Distorted picture (dotted lines or stripes)
 Keep the TV away from electrical noise sources
such as cars, motorcycles, hair-dryers or optional
equipment.
 When installing optional equipment, leave some
space between the optional equipment and the
TV.
 Check the antenna (aerial)/cable connection.
 Check the connection of the Y, PB, PR jacks of
/
and check if each jacks are firmly seated
in their respective jacks.
No picture from the connected equipment
appears on the screen
 Turn the connected equipment on.
 Check the cable connection.
 Press
to display the connected equipment
list, then select the desired input.
 Correctly insert the memory card or other storage
device in the digital still camera.
 Use a digital still camera memory card or other
storage device that has been formatted according
to the instruction manual supplied with the digital
still camera.
 Operations are not guaranteed for all USB
devices. Also, operations differ depending on the
features of the USB device and the video being
played.
Cannot select the connected equipment on
the menu or cannot switch the input
 Check the cable connection.
Sound
No sound, but good picture
 Press  +/– or  (Mute).
 Check if [Speakers] in [AV Set-up] is set to [TV
Speakers] (page 23).
 Check if the headphone plug is connected to the
TV.
32GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\080ADD.fm
No sound or noisy sound
Sometimes video streaming quality is poor
when using the wireless LAN
 Check if the TV system setting is appropriate
 The wireless network connection quality varies
(page 19).
depending on the distance or obstacles (e.g. wall)
between the TV and the wireless router (access
point), environment interference, and quality of
the wireless router (access point).
Channels
Some channels are blank
 The channel is for scrambled/subscription service
only. Subscribe to a pay TV service.
 Channel is used only for data (no picture or
sound).
 Contact the broadcaster for transmission details.
Wireless LAN connection fails or radio
reception conditions are poor
 Check the installation location of the TV and
Network
What kind of devices can be connected to use
the Screen mirroring function?
 Sony Screen mirroring compatible devices
wireless router (access point). Signal condition
may be affected for the following reasons.
 Other wireless devices, microwaves,
fluorescent lights, etc., are placed nearby.
 There are floors or walls between the wireless
router (access point) and TV.
If the problem persists even after checking the
above, try making a wired LAN connection.
Poor picture on Internet Video
(Xperia) can be connected.
 Quality depends on the original video provided by
Video or sound sometimes cuts out
the internet contents provider and your
connection bandwidth.
 Devices emitting radio waves, such as other
Some pay contents cannot be played
 The source device needs to be compatible with
HDCP (High-bandwidth Digital Content
Protection) 2.0/2.1 system. Some pay contents
may not be displayed via a non-compatible
source device.
Certain internet contents displays a loss of
detail, especially during fast-motion or dark
scenes
 Video quality and picture size depend on
broadband speed and delivery by content
providers.
Good picture quality but no sound on the
internet contents
 Quality depends on the original content provided
by the internet contents provider and your
connection bandwidth.
 Due to the nature of Internet video, not all videos
will contain sound.
Your TV cannot connect to the server
 Check the LAN cable or connection to your server
and your TV.
 Check if your network is properly configured on
Apps are inaccessible
 Check that the LAN cable or AC power cord of the
your TV.
A message appears stating that the TV cannot
connect to your network
 Check the current network settings. Press HOME,
then select [Settings] t [System Settings] t
[Set-up] t [Network] t [Network Set-up] t
[View Network setting and status]. If all of your
network settings are “-”, your server may not be
connected properly. Check your network
connections and/or server’s instruction manual
for connection information.
 Reconfigure your network settings.
33GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
GB
Additional Information
wireless LAN devices or microwave ovens, may
interfere with the Screen mirroring function using
wireless LAN. Keep the TV or Sony Screen
mirroring compatible devices (Xperia) away from
such devices, or turn them off if possible.
 Communication speed may change according to
the distance or obstacles between devices, device
configuration, radio wave condition, line
congestion or what device you use.
Communication may cut out due to the radio
wave condition.
router/modem* has been connected properly.
* Your router/modem must be set in advance to
connect to the Internet. Contact your Internet
service provider for router/modem settings.
 Try using apps later. The app content provider’s
server may be out of service.
masterpage: Right
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\080ADD.fm
 If the LAN cable is connected to an active server
and the TV has acquired an IP address, check your
DLNA Certified™ media server’s connections and
configurations.
Note
 Your IP address configuration can be viewed by
selecting the [View Network setting and status]
option.
DLNA Certified™ media server is inaccessible
although it is listed under [Media] in the
Home Menu
 Check your LAN cable/connection or your server
connections. The TV may have lost connection
with the server.
 Perform [Server Diagnostics] to check if your
media server is properly communicating with the
TV. Press HOME, then select [Settings] t [System
Settings] t [Set-up] t [Network] t [Home
Network Setup] t [Server Diagnostics].
masterpage: Left
General
The TV turns off automatically (the TV enters
standby mode)
 Check if the [Sleep Timer] is activated (page 22).
 Check if the [Duration] is activated by [On Timer]
(page 22) or [Photo Frame Settings] (page 22).
 Check if the [Idle TV Standby] is activated
(page 24).
Some input sources cannot be selected
 Select [Video Labels] and select [Always] of the
input source (page 23).
The remote control does not function
 Replace the batteries.
HDMI equipment does not appear on [BRAVIA
Sync Device List]
 Check that your equipment is compatible with
BRAVIA Sync Control.
When using the renderer function, music files
cannot be played back
Cannot select [Off] in [BRAVIA Sync Control]
 Some applications display a photo file pre-
 If you have connected any audio system that is
installed in the PC simultaneously with music
playback when using the renderer function.
Depending on the pre-installed photo file, music
playback may not be possible, but may become
possible by changing the photo file.
You could not connect Internet
 Check that the LAN cable or AC power cord of the
router/modem* has been connected properly.
* Your router/modem must be set in advance to
connect to the Internet. Contact your Internet
service provider for router/modem settings.
compatible with BRAVIA Sync Control, you cannot
select [Off] in this menu. To change the audio
output to the TV speaker, select [TV Speakers] in
the [Speakers] menu (page 23).
The [Parental Lock] password has been
forgotten
 Enter 9999 for the PIN code.
 Update PIN code by pressing HOME and select
[Settings] t [System Settings] t [Parental Lock]
t [Change PIN Code].
You do not have YouTube ID
Store Display Mode or Promoting Feature
Logo appears on the screen
 If you do not have a YouTube ID and password,
 On the remote control, press RETURN then press
register them through the address below.
http://www.google.com/device
(You can also register a YouTube ID and password
from your PC.)
After registering your ID, you can use it
immediately.
HOME and select [Settings] t [System Settings]
t [Set-up] t [Auto Start-up]. Be sure to select
[Home] in [Location].
34GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\080ADD.fm
For KLV-32W512D / 32R412D
640 × 480, 31.5 kHz, 60 Hz
800 × 600, 37.9 kHz, 60 Hz
1,024 × 768, 48.4 kHz, 60 Hz
1,280 × 768, 47.4 kHz, 60 Hz
1,280 × 768, 47.8 kHz, 60 Hz
1,360 × 768, 47.7 kHz, 60 Hz
Audio: Two channel linear PCM: 32, 44.1 and
48 kHz, 16, 20 and 24 bits, Dolby Digital, Dolby
Digital Plus (except KLV-32R412D), DTS
Specifications
System
Panel system
LCD (Liquid Crystal Display) Panel, LED backlight
TV system
Depend on your country/area selection
Analogue: B/G, I, D/K, M
ARC (Audio Return Channel) (HDMI IN 1 only)
Colour/video system
PCM, Dolby Digital, Dolby Digital Plus (except
KLV-32R412D), DTS
Analogue: PAL, SECAM, NTSC3.58, NTSC4.43
Channel coverage
AUDIO OUT/ (Stereo mini jack)
Depend on your country/area selection
Analogue: UHF/VHF/Cable
Headphone, Audio output, Subwoofer
1,
Sound output (Only for 19.5 V supply)
2 (except KLV-32R412D)
USB port
8 W + 8 W + 14 W
1 (KLV-32R412D only)
Wireless technology
USB port
Protocol IEEE802.11b/g/n (except KLV-32R412D)
DC IN 19.5 V
AC adapter input
Input/Output jacks
LAN (except KLV-32R412D)
Antenna (aerial)/cable
75 ohm external terminal for VHF/UHF
COMPONENT IN/
VIDEO IN
10BASE-T/100BASE-TX connector (Depending on
the operating environment of the network,
connection speed may differ. 10BASE-T/100BASETX communication rate and communication
quality are not guaranteed for this TV.)
Others
Optional accessories
Wall-Mount Bracket: SU-WL450
Operating temperature
AUDIO IN
0 ºC – 40 ºC
Audio input (phono jacks)
Operating humidity
HDMI IN 1 (ARC), HDMI IN 2
10 % – 80 % RH (non-condensing)
HDMI Video: 1080p(30, 50, 60 Hz), 1080/24p,
1080i(50, 60 Hz), 720p(30, 50, 60 Hz), 720/24p,
576p, 576i, 480p, 480i
PC input: (Horizontal × Vertical, Horizontal
frequency, Vertical frequency)
For KLV-48W562D / 40W562D / 32W562D
640 × 480, 31.5 kHz, 60 Hz
800 × 600, 37.9 kHz, 60 Hz
1,024 × 768, 48.4 kHz, 60 Hz
1,280 × 768, 47.4 kHz, 60 Hz
1,280 × 768, 47.8 kHz, 60 Hz
1,360 × 768, 47.7 kHz, 60 Hz
1,280 × 1,024, 64 kHz, 60 Hz
*1,920 × 1,080, 67.5 kHz, 60 Hz
Power and others
Power requirements
19.5 V DC with AC adapter
Rating: Input 100 V - 240 V AC, 50/60 Hz
Screen size (measured diagonally) (approx.)
KLV-48W562D: 48 inches / 120.9 cm
KLV-40W562D: 40 inches / 101.6 cm
KLV-32W562D: 32 inches / 80.1 cm
KLV-32W512D / 32R412D: 32 inches / 80.0 cm
Display resolution
* The 1080p timing when applied to the HDMI input
will be treated as a video timing and not PC
timing.
KLV-48W562D / 40W562D / 32W562D: 1,920 dots
(horizontal) × 1,080 lines (vertical)
KLV-32W512D / 32R412D: 1,366 dots (horizontal) ×
768 lines (vertical)
35GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
GB
Additional Information
COMPONENT IN
Supported formats: 1080p(50, 60 Hz), 1080i(50,
60 Hz), 720p(50, 60 Hz), 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3 V negative sync
PB: 0.7 Vp-p, 75 ohms
PR: 0.7 Vp-p, 75 ohms
Video input (phono jack)
COMPONENT IN/
masterpage: Right
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\080ADD.fm
Power consumption
KLV-48W562D: 78 W
KLV-40W562D: 63 W
KLV-32W562D: 57 W
KLV-32W512D: 56 W
KLV-32R412D: 52 W
Dimensions (Approx.) (w × h × d)
with Table-Top Stand
KLV-48W562D: 1,089 × 671 × 224 mm
KLV-40W562D: 924 × 580 × 198 mm
KLV-32W562D / 32W512D / 32R412D:
738 × 470 × 178 mm
without Table-Top Stand
KLV-48W562D: 1,089 × 638 × 65 mm
KLV-40W562D: 924 × 546 × 65 mm
KLV-32W562D / 32W512D / 32R412D:
738 × 441 × 65 mm
Mass (Approx.)
with Table-Top Stand
KLV-48W562D: 12.1 kg
KLV-40W562D: 9.4 kg
KLV-32W562D / 32W512D / 32R412D: 6.9 kg
without Table-Top Stand
KLV-48W562D: 11.3 kg
KLV-40W562D: 8.7 kg
KLV-32W562D / 32W512D / 32R412D: 6.4 kg
Note
• Optional accessories availability depends on
countries/region/TV model/stock.
• Design and specifications are subject to change
without notice.
masterpage: Left
Trademark information
• The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of
HDMI Licensing LLC in the United States
and other countries.
• Manufactured under license from Dolby
Laboratories.
Dolby, Dolby Audio, and the double-D
symbol are trademarks of Dolby
Laboratories.
• “BRAVIA” and
are trademarks of
Sony Corporation.
• “Blu-ray Disc”, “Blu-ray” and “Blu-ray Disc”
logo are trademarks of Blu-ray Disc
Association.
• For DTS patents, see
http://patents.dts.com. Manufactured
under license from DTS, Inc.
DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and
DTS 2.0+ Digital Out is a trademark of DTS,
Inc. © DTS, Inc. All Rights Reserved.
• TUXERA is a registered trademark of Tuxera
Inc. in the US and other countries.
• Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States and/or
other countries.
• This product contains technology subject
to certain intellectual property rights of
Microsoft. Use or distribution of this
technology outside of this product is
prohibited without the appropriate
license(s) from Microsoft.
(except KLV-32R412D)
• Opera® Devices SDK from Opera Software
ASA. Copyright 1995-2015 Opera Software
ASA. All rights reserved.
• Wi-Fi, Wi-Fi Direct, Miracast, Wi-Fi
Protected Setup and Wi-Fi CERTIFIED Logo
are trademarks or registered trademarks of
Wi-Fi Alliance.
36GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\080ADD.fm
masterpage: Right
GB
Additional Information
(except for KLV-32R412D)
37GB
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)
C:\Users\fle1\Desktop\FULLSET\SY160183_SE3N PAA IM (REV 2)\4584674131\090BCO.fm
masterpage: BCO
Customer Support and Contact:
©2016 Sony Corporation
Printed in Malaysia
4-584-674-13(1)
KLV-48W562D / 40W562D / 32W562D / 32W512D / 32R412D
4-584-674-13(1)

advertisement

Related manuals

advertisement