advertisement
▼
Scroll to page 2
of 122
HT-F9730W 7.1CH Blu-ray™ Home Entertainment System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register HT-F9730W_ZC_0805.indd 1 2013-08-06 오후 1:07:53 Safety Information Warning TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash and arrowhead within the triangle are warning signs alerting you to dangerous voltage inside the product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING • To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Note to CATV system installer This reminder is provided to call the CATV system installer’s attention to Section 820~40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. CLASS 1 LASER product This product is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. DANGER : • VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR) The exclamation point within the triangle is a warning sign alerting you to important instructions accompanying the product. CAUTION : • CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM (IEC 60825-1) • THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1 PRODUCTO LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT LÁSER CLASE 1 FCC NOTES This device complies with Industry Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. | 2 English HT-F9730W_ZC_0805.indd 2 2013-08-06 오후 1:08:17 Precautions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including AV receivers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where it exits the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Handling Cautions • Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases, on the apparatus. • To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times. • Do not touch the power plug with a wet hand. It can cause an electric shock. • Do not plug multiple electric devices into the same wall socket. Overloading a socket can cause it to overheat, resulting in a fire. • Before connecting other components to this product, be sure to turn them off. • If you move your product suddenly from a cold place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback. If this occurs, unplug the product, wait for two hours, and then connect the plug to the power outlet. Then, insert the disc, and try to play back again. English HT-F9730W_ZC_0805.indd 3 Safety Information Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. • Holding Discs - Fingerprints or scratches on a disc may reduce sound and picture quality or cause skipping. - Avoid touching the surface of a disc where data has been recorded. - Hold the disc by the edges so that fingerprints will not get on the surface. - Do not stick paper or tape on the disc. • Cleaning Discs - If you get fingerprints or dirt on a disc, clean it with a mild detergent diluted in water and wipe with a soft cloth. - When cleaning, wipe gently from the inside to the outside of the disc. - Disc Storage Do not keep in direct sunlight. Keep in a cool ventilated area. Keep in a clean protective jacket and store vertically. 01 Important Safety Instructions Disc Storage & Management 3| 2013-08-06 오후 1:08:18 Safety Information • If the product makes an abnormal noise or produces a burning smell or smoke, turn off the power switch immediately and disconnect the power plug from the wall outlet. Then, contact the nearest customer service center for technical assistance. Do not use the product. Using the product as it is may cause a fire or an electric shock. License Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, DTS-HD, the Symbol, and DTS or DTS-HD and the Symbol together are registered trademarks & DTS Neo:Fusion is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. Blu-ray Disc™, Blu-ray™, and the logos are trademarks of Blu-ray Disc Association. This product uses Cinavia technology to limit the use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA.” This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited. - Open Source License Notice In the case of using open source software, Open Source Licenses are available on the product menu. Using the 3D Function IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the 3D function. • Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea, and headaches. If you experience any such symptom, stop viewing 3D TV, remove the 3D Active Glasses, and rest. • Watching 3D images for an extended period of time may cause eye strain. If you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses, and rest. • A responsible adult should frequently check on children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest. • Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.) • Do not use the 3D function or 3D Active Glasses while walking or moving around. Using the 3D function or 3D Active Glasses while moving around may cause you to bump into objects, trip, and/or fall, and cause serious injury. | 4 English HT-F9730W_ZC_0805.indd 4 2013-08-06 오후 1:08:19 GETTING STARTED CONNECTIONS 15 Connecting the Speakers 18 Connecting to a TV and External Devices 19 Connecting to a Network Router SETTINGS 20 20 20 21 25 25 28 Contents SAFETY INFORMATION 2 3 3 3 4 4 5 Warning Precautions Disc Storage & Management Handling Cautions License Using the 3D Function Copyright The Initial Settings Procedure The Home Screen Accessing the Settings Screen Settings Menu Functions Auto Sound Calibration Networks and the Internet Upgrading Software MEDIA PLAY Copyright © 2013 Samsung Electronics Co.,Ltd. All rights reserved; No part or whole of this user’s manual may be reproduced or copied without the prior written permission of Samsung Electronics Co.,Ltd. Disk and Format Compatibility Logos of Discs the product can play Accessories Front Panel Rear Panel Toroidal Ferrite Core Remote Control Safety Information 6 7 10 11 11 12 13 01 • If you want to enjoy 3D content, connect a 3D device (3D compliant AV receiver or TV) to the product’s HDMI OUT port using a high-speed HDMI cable. Put on 3D glasses before playing the 3D content. • The product outputs 3D signals only through an HDMI cable connected to the HDMI OUT port. • The video resolution in 3D play mode is fixed to the resolution of the original 3D video. You can not change the resolution. • Some functions such as BD Wise, screen size adjustment, and resolution adjustment may not operate properly in 3D play mode. • You must use a high-speed HDMI cable for proper output of the 3D signal. • Stay at least three times the width of the screen from the TV when watching 3D images. For example, if you have a 46 inch screen, stay 138 inches (11.5 feet) from the screen. • Place the 3D video screen at eye level for the best 3D picture. • When the product is connected to some 3D devices, the 3D effect may not function properly. • This product does not convert 2D content into 3D. • “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of the Blu-ray Disc Association. 30 30 30 31 31 32 35 40 41 41 The All Content Screen Playing Commercial Discs Playing Files on a USB Device Playing a Disc with User Recorded Content Using the AllShare Network Function Controlling Video Playback Controlling Music Playback Playing Photo Contents Listening to Radio Using the Special Effects Remote Control Buttons NETWORK SERVICES 43 43 44 44 48 48 51 Logging In to Your Samsung Account Before Using Movies & TV Shows or Apps Using Movies & TV Shows Using Apps Screen Mirroring Using the Web Browser Linking your Internet Service Accounts to the Product 51 BD-LIVE™ APPENDIX 52 Additional Information 56 Troubleshooting 59 Specifications English HT-F9730W_ZC_0805.indd 5 5| 2013-08-06 오후 1:08:21 Getting Started Disk and Format Compatibility Disc types and content your Product can Play Media Disc Type Blu-ray Disc 3D Blu-ray Disc VIDEO Details BD-ROM or BD-RE/-R disc recorded in the BD-RE format. DVD-VIDEO, DVD-RW, DVD-R, DVD+RW, DVD+R DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have been recorded and finalized, or a USB storage media containing MKV, MP4 contents. MUSIC CD-RW/-R, DVD-RW/-R, BD-RE/-R Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage media containing MP3 or WMA contents. PHOTO CD-RW/-R, DVD-RW/-R, BD-RE/-R Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage media containing JPEG contents. | NOTES | The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions. If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable. Your product will not play content that has been recorded on a DVD-R at a bitrate that exceeds 10 Mbps. Your product will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds 30 Mbps. Playback may not work for some types of discs, or when you use specific operations, such as angle change and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary. When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly. Disc Types your Product cannot Play • HD DVD • DVD-ROM/PD/MV-Disc, etc • DVD-RAM • Super Audio CD (except CD layer) • DVD-RW(VR mode) • CVD/CD-ROM/CDV/ CD-G/CD-I/LD (CD-Gs play audio only, not graphics.) • 3.9 GB DVD-R Disc for Authoring. | NOTES | This product may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow specific or limited operation and provide only certain features during playback. Please note that this is not a defect in the product. Samsung cannot guarantee that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software and/or the manufacture of discs. Please contact the SAMSUNG Customer Care Center at 1-800-726-7864 if you have questions or encounter difficulty when playing Blu-ray Disc, DVD, or CD discs in this product. Also, refer to rest of this user manual for additional information on playback restrictions. Some commercial discs and DVD discs purchased outside your region may not play on this product. | 6 English HT-F9730W_ZC_0805.indd 6 2013-08-06 오후 1:08:22 Region Code Logos of Discs the Product can Play Region Code Area A North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia. B Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand. C India, China, Russia, Central and South Asia. 1 The U.S., U.S. territories and Canada 2 Europe, Japan, the Middle East, Egypt, Africa, Greenland 3 Taiwan, Korea, the Philippines, Indonesia, Hong Kong 4 Mexico, South America, Central America, Australia, New Zealand, Pacific Islands, Caribbean 5 Russia, Eastern Europe, India, North Korea, Mongolia 6 China Blu-ray Disc Blu-ray Disc 3D Blu-ray Disc BD-LIVE Dolby Getting Started Disc Type 02 Both products and discs are coded by region. These regional codes must match for a disc to play. If the codes do not match, the disc will not play. The Region Number for this product is displayed on the rear panel of the product. DTS DVD-VIDEO Java NTSC broadcast system in U.S.A, Canada, Korea, Japan | NOTES | If the Region number of a Blu-ray Disc/DVD does not correspond to the Region number of this product, the product cannot play the disc. English HT-F9730W_ZC_0805.indd 7 7| 2013-08-06 오후 1:08:22 Getting Started Supported Formats Video File Support File Extension Container Video Codec Frame rate (fps) Resolution Bitrate (Mbps) Audio Codec MPEG4 SP/ASP *.avi *.mkv *.asf *.wmv *.mp4 *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.mov *.flv *.vob *.svi *.m2ts AVI MKV ASF MP4 3GP MOV FLV VRO VOB PS TS SVAF *.webm WebM H.264 BP/ MP/HP Motion JPEG Microsoft MPEG-4 v3 Window Media Video v7, v8, v9 1920x1080 (WMV v7,v8, MSMPEG4 v3 : 1280x720) 30 6~30 MPEG2 MPEG1 4 VP6 640x480 MVC - 24/25/30 60 VP8 1920x1080 6~30 20 Limitations - Even when a file is encoded by a supported codec listed above, the file might not be played if its content is defective or corrupted. - Normal playback is not guaranteed if the file's container information is wrong or the file itself is corrupted. - Files having higher bit or frame rates than standard may stutter when played back. - The seek (skip) function is not available if the file's index table is damaged. - When you playback a file remotely through a network connection, video playback may stutter depending on the network speed. - Some USB/Digital camera devices may not be compatible with the product. Video decoder - Supports up to H.264 Level 4.1 (except for FMO/ASO/ RS) - Does not support VC1 AP L4 - Except for WMV v7, v8, MSMPEG4 v3, MVC, VP6 Below 1280 X 720: 60 frame max Above 1280 X 720: 30 frame max - Does not support GMC 2 or higher Dolby Digital LPCM ADPCM (IMA, MS) AAC HE-AAC WMA Dolby Digital Plus MPEG(MP3) DTS Vorbis - Supports SVAF Top/Bottom, Side by Side Only - Supports BD MVC Spec Only Audio decoder - Supports WMA 10 Pro (Up to 5.1) Does not support WMA lossless audio. Supported ADPCM IMA, MS. Does not support ADPCM (A-Law, μ-Low) Does not support QCELP, AMR NB/WB Supports vorbis (Up to 2ch), Supports Dolby Digital Plus (Up to 7.1ch) Comments - MPEG4 : Supports up to GMC 1-Warping Point. H.264 : Supports up to BP/MP/HP Level 4.1. WMV : Supports V9, VC1 SP/MP/AP L3. MPEG1 : Does not support D-picture. MPEG2 : Supports up to Hight Profile High Level. | NOTES | Some MKV and MP4 format discs may not play, depending on their video resolution and frame rate. | 8 English HT-F9730W_ZC_0805.indd 8 2013-08-06 오후 1:08:27 Music File Support Notes on the USB connection Audio Codec Support Range *.mp3 MP3 MPEG1 Audio Layer 3 - *.m4a *.mpa *.aac MPEG4 AAC - *.flac FLAC FLAC Supports up to 2ch *.ogg OGG Vorbis Supports up to 2ch *.wma WMA WMA Supports WMA 10 Pro (Up to 5.1) Does not support WMA lossless audio Supports up to M2 profile Does not support LBR mode *.wav wav wav - *.mid *.midi midi midi type 0 and type 1 *.ape ape ape Does not support X13, NVT • Your product supports USB storage media, MP3 players, digital cameras, and USB card readers. • The product does not support folder or file names longer than 128 characters. • Some USB/digital camera devices may not be compatible with the product. • Your product supports the FAT 16, FAT 32, and NTFS file systems. • Connect USB devices directly to the product’s USB port. Connecting through a USB cable may cause compatibility problems. • Inserting more than one memory device into a multi-card reader may cause the reader to operate improperly. • The product does not support the PTP protocol. • Do not disconnect a USB device during a “loading” process. • The bigger the image resolution, the longer the image takes to display. • This product cannot play MP3 files with DRM (Digital Rights Management) downloaded from commercial sites. • Your product only supports video that is under 30fps (frame rate). • Your product only supports USB Mass Storage Class (MSC) devices such as thumb drives and USB HDD. (HUB is not supported.) • Certain USB HDD Devices, multi-card readers and thumb drives may not be compatible with this product. • If some USB devices require excessive power, they may be limited by the circuit safety device. • If playback from a USB HDD is unstable, provide additional power by plugging the HDD into a wall socket. If the problem continues, contact the USB HDD manufacturer. • SAMSUNG is not responsible for any data file damage or data loss. Getting Started Container 02 File Extension Picture File Support File Extension Type Resolution *.jpg *.jpeg JPEG 15360x8640 *.png PNG 4096x4096 *.bmp BMP 4096x4096 *.mpo MPO 15360x8640 English HT-F9730W_ZC_0805.indd 9 9| 2013-08-06 오후 1:08:28 Getting Started AVCHD (Advanced Video Codec High Definition) • This product can play back AVCHD format discs. These discs are normally recorded and used in camcorders. • The AVCHD format is a high definition digital video camera format. • The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional image compressing format. • Some AVCHD discs use the “x.v.Color” format. This product can play back AVCHD discs that use the “x.v.Color” format. • “x.v.Color” is a trademark of Sony Corporation. • “AVCHD” and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd. and Sony Corporation. | NOTES | Some AVCHD format discs may not play, depending on the recording conditions. AVCHD format discs need to be finalized. “x.v.Color” offers a wider color range than normal DVD camcorder discs. Some MKV and MP4 format discs may not play, depending on their video resolution and frame rate. Accessories Check for the supplied accessories below. FUNCTION TV SOURCE (For Power cord) RECEIVER BD TV SLEEP 1 2 4 5 7 8 3 6 9 DISC MENU TITLE MENU 0 POPUP MUTE VOL TV SOUND FULL SCREEN (For Speaker cable) TUNING / CH REPEAT HOME TOOLS INFO EXIT RETURN TUNER MEMORY User Manual Toroidal Ferrite Core ASC microphone A SMART PRESET FM Antenna Power Cable Soft Cloth B C MO/ST D SEARCH S/W LEVEL 3D SOUND HUB MANUAL AUDIO SUBTITLE SOUND EFFECT Remote Control / Batteries (AAA size) Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. An administration fee may be charged if either a. an engineer is called out at your request and there is no defect in the product (i.e. where you have failed to read this user manual) b. you bring the unit to a repair center and there is no defect in the product (i.e. where you have failed to read this user manual). The amount of such administration charge will be advised to you before any work or home visit is carried out. | 10 English HT-F9730W_ZC_0805.indd 10 2013-08-06 오후 1:08:29 Front Panel 02 VACUUM TUBE AMP PLAY/PAUSE D H-EN HIG OPEN/CLOSE FUNCTION POWER VACUUM TUBE SO UND Getting Started STOP DISC TRAY REMOTE CONTROL SENSOR DISPLAY USB 5V 0.5A VOLUME CONTROL | NOTES | Cellular phones or mobile devices placed near the vacuum tube amp or electronic products placed on the top of the product can cause audio noise or distortion. When the product is on, do not let children touch the product's surface. It will be hot. To upgrade the product's software through the USB jack, you must use a USB flash drive. When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the 6 button on the product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the E button. If you use the Internet service or play the USB device contents on the TV, you cannot select the BD/DVD mode with the FUNCTION button. Stop the playing contents on the TV first to select the BD/DVD mode. Rear Panel * FM ANTENNA ASC IN AUX IN SPEAKER OUTPUT CONNECTORS LAN TERMINAL COOLING FAN FM ANT L POWER OPTICAL ASC IN HDMI OUT 1 HDMI IN HDMI OUT R 2 HDMI IN DIGITAL AUDIO IN SPEAKERS OUT AUX IN LAN CENTER FRONT SUBWOOFER FRONT L R FRONT TOP L FRONT TOP R IMPEDANCE : 3 EXTERNAL DIGITAL AUDIO IN (OPTICAL) POWER CORD * Connecting the FM Antenna 1. Connect the FM antenna supplied to the FM ANT Jack. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. | NOTES | Maintain a minimum of 4 inches of clear space on all sides of the home theater to ensure adequate ventilation. Do not obstruct the cooling fan or ventilation holes. This product does not receive AM broadcasts. English HT-F9730W_ZC_0805.indd 11 11 | 2013-08-06 오후 1:08:35 Getting Started Toroidal Ferrite Core For the Power Cord POWER <SWA-6000> <Main Unit> If you attach a Toroidal ferrite core to the power cord, it will help to prevent RF interference from radio signals. 1. Pull the fixing tab of the Toroidal ferrite core to open it. 2. Make two loops in the power cord. 3. Attach the Toroidal ferrite core to the power cord as the figure shows and press it until it clicks. For the Speaker Cable OPTICAL ASC IN DIGITAL AUDIO IN <SWA-6000> SPEAKERS OUT FM ANT CENTER FRONT SUBWOOFER FRONT L R FRONT TOP L FRONT TOP R IMPEDANCE : 3 <Main Unit> SWA-6000 Make 3 loops in each of the speaker cables connected to the REAR L and REAR R terminals of the wireless receiver (SWA-6000) and attach the ferrite core in the same way as step 3 above. Main Unit 1. Open the ferrite core by pulling up the tab. 2. Make two loops in each speaker cable. 3. Attach the ferrite core to the arranged cables and press to close it until you hear a click. • Attach the ferrite core as close to the main unit as possible. | 12 English HT-F9730W_ZC_0805.indd 12 2013-08-06 오후 1:08:37 Remote Control Turn the product on and off. FUNCTION To change to Television mode and control the TV, press the TV button. TV SOURCE RECEIVER To change to Home Theater mode and control the Home Theater, press the BD button. Press numeric buttons to operate options. BD TV SLEEP 1 2 3 4 5 6 7 8 9 DISC MENU 0 POPUP Press to skip backwards or forwards. Press to stop/play a disc. Press to pause a disc. MUTE VOL TV SOUND TUNING / CH Press to move to the Home screen. FULL SCREEN REPEAT HOME Press to see the full screen on a TV. TOOLS INFO RETURN EXIT Select on-screen menu items and change menu values. Return to the previous menu. These buttons are used both for menus on the product and also several Blu-ray Disc functions. A SMART B MANUAL PRESET MO/ST C D SEARCH S/W LEVEL 3D SOUND Press to select MANUAL/ PRESET in the Tuner function. Press to search contents. Selects the disc Audio language. AUDIO SUBTITLE Search for active FM stations and to change channels. Press to output the audio signal to the home theater speakers or the TV speaker. (See page 42) Allows you to repeat a title, chapter, track or disc. Use to display the playback information when playing a Blu-ray/DVD disc. Press to exit the menu. Use to set a preset radio frequency. TUNER MEMORY HUB Press to use Smart Hub. Use to enter the Popup menu/Title menu. Press to search backwards or forwards. Cut off the sound temporarily. Press to use the Tools menu. Set a Sleep time to shut off the product. Press to open and close the disc tray. To use the NFC function, tag the compatible Bluetooth source device to the on the back of the remote control. (See page 39) TITLE MENU Press to view the disc menu. Adjust the volume. Press to select the home theater's mode (HDMI, AUX, BD/DVD, etc.). or Press to select TV's video mode. Getting Started Tour of the Remote Control 02 To pair NFC (Near Field Communication) devices with your Home Theater, you must first pair the remote control with the Home Theater. See page 39. Pairing occurs automatically when you press any button on the remote after turning on the Home Theater for the first time. SOUND Select MONO or STEREO for radio broadcasts. Press to apply the 3D sound effect. EFFECT Press to apply sound effects. Use to adjust the level of the subwoofer. Selects the disc subtitle language. English HT-F9730W_ZC_0805.indd 13 13 | 2013-08-06 오후 1:08:39 Getting Started Installing batteries in the Remote Control Brand Battery size: AAA 1 TV Control Codes 2 Code Brand Code Mitsubishi/MGA 18, 40, 59, 60, 75 Admiral (M.Wards) 56, 57, 58 MTC 18 A Mark 01, 15 NEC 18, 19, 20, 40, 59, 60 Anam 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14 03 03 03 06, 07, 08, 09, 54, 66, 67, 73, 74 18 03, 15, 17, 18, 48, 54, 59, 62, 69, 90 15, 17, 18, 40, 48, 54, 62, 72 63, 66, 80, 91 15, 18, 59 40 06, 66, 67 17, 48, 56, 60, 61, 75 18, 59, 67, 76, 77, 78, 92, 93, 94 03, 19 40 AOC 01, 18, 40, 48 Nikei Onking Onwa Bell & Howell (M.Wards) 57, 58, 81 Panasonic Brocsonic 59, 60 Penney | NOTES | Candle 18 Make sure to match the “+” and “–” ends of the Cetronic 03 batteries with the diagram inside the compartment. Citizen 03, 18, 25 Assuming typical TV usage, the batteries last for about Cinema 97 one year. The remote control can be used up to approximately 23 feet (7 meters) from the product in a straight line. Setting up the Remote Control You can control certain functions of your TV with this remote control. To operate a TV with the Remote Control 1. Press the TV button to set the remote control to TV mode. 2. Turn on your TV. 3. While holding down the POWER button, enter the code corresponding to your brand of TV. • If there is more than one code listed for your TV in the table, enter one at a time to determine which code works. • Example : For a Samsung TV While holding down the POWER button, use the number buttons to enter 00. If that does not work, try 15, then 16, etc. 4. If the TV turns off, the setting is complete. • You can use the TV POWER, VOLUME, CHANNEL, and Numeric buttons (0~9). | NOTES | The remote may not be able to control some functions, depending on your brand of TV. Also, the remote control may not work on some brands of TVs. The remote control will work with Samsung TVs by default. Do not dispose of batteries in a fire. Do not short circuit, disassemble or overheat the batteries. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Classic 03 Concerto 18 Contec 46 Coronado 15 Craig 03, 05, 61, 82, 83, 84 Croslex 62 Crown 03 Curtis Mates 59, 61, 63 CXC 03 Daewoo 02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 34, 35, 36, 48, 59, 90 Daytron 40 Dynasty 03 Emerson 03, 15, 40, 46, 59, 61, 64, 82, 83, 84, 85 Fisher 19, 65 Funai 03 Futuretech 03 General Electric 06, 40, 56, 59, 66, 67, 68 (GE) Hall Mark 40 Hitachi 15, 18, 50, 59, 69 Inkel 45 JC Penny 56, 59, 67, 86 JVC 70 KTV 59, 61, 87, 88 KEC 03, 15, 40 KMC 15 LG (Goldstar) 01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44 Philco Philips Pioneer Portland Proton Quasar Radio Shack RCA/Proscan Realistic Sampo Samsung 00, 15, 16, 17, 40, 43, 46, 47, 48, 49, 59, 60, 98 Sanyo Scott Sears Sharp Signature 2000 (M.Wards) 19, 61, 65 03, 40, 60, 61 15, 18, 19 15, 57, 64 Sony 50, 51, 52, 53, 55 Soundesign 03, 40 57, 58 Spectricon 01 SSS 18 Sylvania Symphonic Tatung Techwood Teknika TMK Toshiba Vidtech 18, 40, 48, 54, 59, 60, 62 61, 95, 96 06 18 03, 15, 18, 25 18, 40 19, 57, 63, 71 18 Videch 59, 60, 69 Luxman 18 Wards 15, 17, 18, 40, 48, 54, 60, 64 LXI (Sears) 19, 54, 56, 59, 60, 62, 63, 65, 71 Yamaha 18 York 40 Magnavox 15, 17, 18, 48, 54, 59, 60, 62, 72, 89 Yupiteru 03 Marantz 40, 54 Zenith 58, 79 Matsui 54 Zonda 01 MGA 18, 40 Dongyang 03, 54 | 14 English HT-F9730W_ZC_0923.indd 14 2013-09-23 4:44:14 Connections This section describes various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. 03 Connecting the Speakers under the TV stand. Center Subwoofer Front/ Front Top (R) Connections Position of the product Place it on a stand or cabinet shelf, or Selecting the Listening Position The listening position should be located about 2.5 to 3 times the TV's screen Surround (R) Product size away from the TV. For example, if you have a 46 inch screen, locate the listening position 115 to 138 inches (9.6 Front/ Front Top (L) to 11.5 feet) from the screen. Surround (L) Wireless Receiver Module Front/Front Top Speakers Place these speakers in front of your listening position, facing inwards (about 45°) toward you. Place the front speakers so that their tweeters will be at the same height as your ear. Align the front face of the front/front top speakers with the front face of the center speaker or place them slightly in front of the center speakers. Center Speaker It is best to install the Center Speaker at the same height as the front/front top speakers. You can also install it directly over or under the TV. Surround Speakers Place these speakers to the side of your listening position. If there isn't enough room, place these speakers so they face each other. Position them about 2 to 3 feet (60 to 90cm) above your ear, facing slightly downward. * Unlike the front and center speakers, the surround speakers are used mainly for sound effects. Sound will not come from them all the time. Subwoofer The position of the subwoofer is not so critical. Place it anywhere you like. * Surround speakers must be connected to the wireless receiver module. Speaker Components SWA-6000 Screw (5x20) x 8 Speaker Cable x 4 Center Front/Front Top x 2 Surround x 2 Stand x 2 Stand Base x 2 Subwoofer Wireless Receiver Module English HT-F9730W_ZC_0805.indd 15 15 | 2013-08-06 오후 1:08:44 Connections Installing the Speakers on the Tallboy Stand 1. Find the speaker cable that is attached to the Stand. Turn the Stand and Stand Base upside-down, unravel the speaker cable, and then draw it through the hole in the Stand Base. 1 Stand Base 2 | NOTES | Handle the Stand carefully. It is heavy. Stand 2. Connect the Stand Base to the bottom of the Stand. 3. Insert three 5x20 screws into the holes in the Stand Base, and then tighten them with a screwdriver as shown in the illustration. 4. 3 4 Speaker Connect the speaker to the stand. Stand 5. Insert a 5x15 screw into the screw hole in the rear of the speaker, and then tighten it with a screwdriver. 6. Illustration 6 shows the appearance of the speaker after it has been assembled. Repeat Steps 1 through 5 with the other speaker, and then go to Step 7. 7. Match the colored plug on the end of the speaker wire connected to each speaker to the colored jacks on the back of the home theater, and then insert each plug. 5 6 Connecting the Other Speakers 1. Match each speaker cable bundle to the correct speaker by matching the color coded plug on each bundle to the colored sticker on the bottom of each speaker. 2. To attach speaker wire to each speaker: a. Press down the red tab on the back of the speaker, insert the red wire, and then release the tab. b. Press down the black tab on the back of the speaker, insert the black wire, and then release the tab. 3. 4. 5. 6. Black Red Connect the speaker wire plugs from each speaker to the back of the product by matching the colors of the speaker plugs to the colors of the speaker jacks. Connect the left and right surround speakers to the wireless receiver module. Again, match the color of the plugs to the jacks on the wireless receiver module. Plug the power cord of the wireless receiver module into a wall outlet. Turn on the product. The product and wireless receiver module will now communicate with each other and you will hear sound from the Surround speakers. | 16 English HT-F9730W_ZC_0805.indd 16 2013-08-06 오후 1:08:49 Center Speaker 03 SPEAKERS OUT Subwoofer CENTER FRONT SUBWOOFER FRONT L R FRONT TOP L FRONT TOP R Connections Front/Front Top Speaker (L) IMPEDANCE : 3 Surround Speaker (L) Front/Front Top Speaker (R) Surround Speaker (R) L ASC IN SPEAKERS OUT T N CENTER FRONT SUBWOOFER FRONT L R FRONT TOP L FRONT TOP R IMPEDANCE : 3 Wireless Receiver Module * This product should be connected with the SWA-6000 only. | CAUTION | If you want to install the speakers on the wall, fasten screws or nails (not provided) firmly to the wall wherever you want to hang a speaker, and then, using the hole in the rear of each speaker, carefully hang each speaker on a screw or nail. Do not let children play with or near the speakers. They could get hurt if a speaker falls. When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct. Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien substances into the duct (hole) of the subwoofer speaker. Do not hang the subwoofer on the wall using the duct (hole). The wireless receiving antenna is built into the wireless receiver module. Keep it away from water and moisture. For optimal listening performance, make sure that the area around the wireless receiver module location is clear of any obstructions. If you hear no sound from the wireless surround speakers, switch the mode to Dolby Pro Logic II. In 2-CH mode, you will hear no sound from the wireless surround speakers. | NOTES | If you place a speaker near your TV set, the screen color may be distorted because of the magnetic field. Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the product, sound from the speakers may be disrupted because of interference. If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment or any other device that uses the 2.4/5.8GHz frequencies near the product, sound from the speakers may be disrupted because of interference. The maximum transmission distance from the product to the wireless receiver module is about 33 feet (10m), but may vary depending on your operating environment. If a steel-concrete wall or metallic wall is between the product and the wireless receiver module, the system may not operate at all, because the radio wave cannot penetrate metal. If the product doesn't make a wireless connection you need to run an ID Set between the product and wireless module. Turn off the main unit and be sure both the main unit and wireless module are plugged in. Press and hold the “ID SET” button on the wireless module with a PIN until you see the blue light on top blink fast. Then with the remote control press "0"->"1"->"3"->"5", wait 2 seconds and press POWER to turn the unit on. The blue blinking light will turn to a solid blue, if not repeat. English HT-F9730W_ZC_0805.indd 17 17 | 2013-08-06 오후 1:08:53 Connections Connecting to a TV and External Devices AUX IN L FM ANT ASC IN 1 HDMI OUT HDMI IN 2 R DIGITAL AUDIO IN CENTER FRONT SUBWOOFER FRONT L R FRONT TOP L FRONT TOP R LAN IMPEDANCE : 3 L R W FM ANT POWER OPTICAL SPEAKERS OUT AUX IN LAN 1 HDMI OUT Red HDMI IN R 2 OPTICAL DIGITAL AUDIO IN White Method 1 HDMI IN External Devices Method 2 HDMI OUT Method 3 AUDIO OUT OPTICAL OUT Connecting to a TV Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV. If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control and select HDMI as the external source of the TV. Connecting to External Devices To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the mode changes in this order : BD/DVD D. IN AUX HDMI1 HDMI2 FM BT Method 1 HDMI IN : Connecting to an External Component with an HDMI Cable Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital device. Select the HDMI1 or HDMI2 mode. Method 2 AUX IN : Connecting an External Analog Component Using a RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the external analog component. Select the AUX mode. • Be sure to match the colors on the cable plugs to the colors on the input and output jacks. Method 3 OPTICAL : Connecting an External Digital Audio Component Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (SetTop-Boxes): Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device. Select the D. IN mode. | NOTES | To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV. This system supports Digital sampling frequencies of 32 kHz or higher from external digital components. This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported. | 18 English HT-F9730W_ZC_0805.indd 18 2013-08-06 오후 1:08:54 Connecting to a Network Router Wireless Network 03 You can connect your product to your network router using one of the methods illustrated below. Connections Wired Network L FM ANT POWER OPTICAL ASC IN 1 HDMI IN 2 R SPEAKERS OUT AUX IN LAN HDMI OUT DIGITAL AUDIO IN CENTER FRONT SUBWOOFER FRONT L R FRONT TOP L FRONT TOP R IMPEDANCE : 3 Wireless IP sharer Broadband modem (with integrated router) Broadband service Broadband service Or Router | NOTES | If your wireless IP router supports DHCP, this product Broadband service Broadband modem can use a DHCP or static IP address to connect to the wireless network. Set your wireless IP router to Infrastructure mode. Ad-hoc mode is not supported. The product supports only the following wireless security key protocols: - WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES) Select a channel on the wireless IP router that is not | NOTES | Your router or your Internet Service Provider's policies may prevent the product from accessing Samsung's software update server. If this occurs, contact your Internet Service Provider (ISP) for more information. DSL users, please use a router to make a network connection. To use the AllShare function, you must connect your PC to your network as shown in the illustrations above. The connection can be wired or wireless. currently being used. If the channel set for the wireless IP router is currently being used by another device nearby, it will result in interference and communication failure. In compliance with the newest Wi-Fi certification specifications, Samsung home theaters do not support WEP, TKIP, or TKIP-AES (WPS2 Mixed) security encryption in networks running in the 802.11n mode. Wireless LAN, by its nature, may cause interference, depending on the operating conditions (AP performance, distance, obstacles, interference by other radio devices, etc). English HT-F9730W_ZC_0805.indd 19 19 | 2013-08-06 오후 1:08:56 Settings The Initial Settings Procedure • The Home menu will not appear if you do not configure the initial settings. • The OSD (On Screen Display) may change in this product after you upgrade the software version. • The access steps may differ depending on the menu you selected. The Initial Settings Procedure lets you set the OSD and menu languages, configure the connection to your home network, choose the aspect ratio output (screen size and format) that is correct for your TV, and apply an upgrade to your product's software, if one is available. For complete Initial Settings instructions, follow the order in the screen. | NOTES | If you want to display the Initial Settings screen again and make changes, select Settings > System > Setup in the Home screen or select the Reset option. (See page 23) 3 Photos, Videos & Music : Play photos, videos or music content from Disc, USB, PC or mobile devices. 4 Settings : Set various functions to suit your personal preferences. 5 Recommended Apps : A list of useful and popular apps we recommend you download. 6 Web Browser : You can access the Internet using the Web Browser application. 7 RED (A) : Press the RED (A) button on your remote to create and/or log in to your personal Samsung account. BLUE (D) : Set up the Screen Mirroring function between the home theater and a smart phone or tablet. Selecting an Option on the Home Screen 1. The Home Screen To select an option on the Home screen, move the cursor using the ▲▼◄► buttons until it highlights the option of your choice, and then press the E button. | NOTES | 1 Movies & TV Shows 2 3 Apps 4 If you leave the product in the stop mode for more than 5 minutes without using it, a screen saver will appear on your TV. If the product is left in the screen saver mode for more than 20 minutes, the power will automatically turn off. Photos, Videos & Music Accessing the Settings Screen 1. Select Settings on the Home screen, and then press E. E The Settings screen appears. Settings Add App Add App Add App Web Browser Settings Display Display a Samsung Account d Screen Mirroring UHD Output Audio 5 6 7 TV Aspect Ratio Smart Features BD Wise System Support Movies & TV Shows : Download movies and TV Shows from the Internet. 1 Auto 3D Settings Network 16:9 Original Off Resolution Auto Movie Frame (24Fs) Auto DVD 24Fs Conversion Off | NOTES | Depending on your country, this menu function may not be supported. 2 Apps : Download/Access various for pay or free-of-charge applications. 2. To access the menus, sub-menus, and options on the Settings screen, please refer to the remote control illustration on the next page. | 20 English HT-F9730W_ZC_0805.indd 20 2013-08-06 오후 1:08:59 Buttons on the Remote Control Used for the Settings Menu 3D Settings TV Aspect Ratio Lets you adjust the output of the product to the screen size of your TV. See page 52. REPEAT TOOLS INFO RETURN EXIT 3 2 TUNER MEMORY 4 MO/ST 1 HOME Button : Press to move to the Home screen. 2 RETURN Button : Return to the previous menu. 3 E (Enter) / DIRECTION Button : • Press ▲▼◄► to move the cursor or select an item. • Press the E button to activate the currently selected item or confirm a setting. 4 EXIT Button : Press to exit the current menu. BD Wise BD Wise is Samsung’s latest interconnectivity feature. When you connect a Samsung product and a Samsung TV with BD Wise to each other via HDMI, and BD Wise is on in both the product and TV, the product outputs video at the video resolution and frame rate of the Blu-ray/DVD Disc. Resolution Lets you set the output resolution of the HDMI video signal to BD Wise, Auto, 1080p, 1080i, 720p, 480p. The number indicates the number of lines of video per frame. The i and p indicate interlaced and progressive scan, respectively. The more lines, the higher quality. Movie Frame (24Fs) Setting the Movie Frame (24Fs) feature to Auto lets the product adjust its HDMI output to 24 frames per second automatically for improved picture quality if attached to a 24Fs compatible TV. • You can enjoy the Movie Frame (24Fs) feature only on a TV supporting this frame rate. • Movie Frame is only available when the product is in the HDMI 1080p output resolution modes. DVD 24Fs Conversion Converts DVD playback to 24 frames per second and outputs it via HDMI. This option is only available when Movie Frame (24Fs) is set to on. Detailed Function Information Each Settings function, menu item, and individual option is explained in detail on-screen. To view an explanation, use the ▲▼◄► buttons to select the function, menu item, or option. The explanation will usually appear on the right of the screen. A short description of each Settings function starts on this page. Additional information on some of the functions is also in the Appendix of this manual. Settings Menu Functions Display This option outputs HDMI video at UHD resolution. This is only available when Movie Frame is set to Auto. | NOTES | UHD Output To use this feature, you must connect the product to a device that supports UHD resolution and you must have content that plays at 24Fs (film speed). English HT-F9730W_ZC_0805.indd 21 Settings 1 HOME 04 FULL SCREEN Set up the 3D related functions. 3D Blu-ray Playback Mode: Select whether to play a Blu-ray Disc with 3D contents in 3D Mode. If you move to the Home or Smart Hub Home menu while in 3D mode, the product will switch to 2D automatically. Screen Size: Enter the size of the TV attached to the product. The product will automatically adjust the 3D output to the screen size of the TV. 21 | 2013-08-06 오후 1:09:04 Settings Smart Hub Screen Size Lets you select the optimal size for the Smart Hub Screen. HDMI Color Format Lets you set the color space format for the HDMI output to match the capabilities of the connected device (TV, monitor, etc). HDMI Deep Color Lets you set the product to output video from the HDMI OUT jack with Deep Color. Deep Color provides more accurate color reproduction with greater color depth. Progressive Mode Lets you improve picture quality when viewing DVDs. Audio Return Channel Lets you direct the sound from the TV to the Home Theater speakers. Requires an HDMI connection and an Audio Return Channel (ARC) compatible TV. • If Audio Return Channel is set to on and you are using an HDMI cable to connect the product to the TV, digital optical input will not work. • If Audio Return Channel is set to auto and you are using an HDMI cable to connect the product to the TV, ARC or digital optical input is selected automatically. Digital Output Lets you set the Digital Output to match the capabilities of the AV receiver you’ve connected to the product. For more details, please refer to the digital output selection table. (See page 54) Audio Speaker Settings Auto Sound Calibration Equalizer Smart Volume Speaker Selection Lets you adjust the following speaker settings and turn the test tone on and off so you can test the speakers. Level: Lets you adjust the relative loudness of each speaker from 6db to -6db. For example, if you like deep bass, you can increase the loudness of the subwoofer by 6db. Distance: Lets you adjust the relative distance of each speaker from the listening position up to 9 meters. The farther the distance, the louder the speaker will be. Test Tone: Lets you run the Test Tone function so you can test your adjustments. Setting Test Tone to On turns the Test Tone on. Setting it to Off turns it off. When you run Auto Sound Calibration, the product automatically creates a 7.1 channel sound field optimized for your environment. See page 25. Lets you configure the Equalizer settings manually. Lets you set the product so that the volume remains stable when a scene change occurs or when you change the channel. Lets you select which speakers you want active, either the TV's speakers or the home theater's speakers. Dynamic Range Control Lets you apply dynamic range control to Dolby Digital, Dolby Digital Plus, and Dolby TrueHD audio. Auto: Automatically controls the dynamic range of Dolby TrueHD audio, based on information in the Dolby TrueHD soundtrack. Also turns dynamic range control off for Dolby Digital and Dolby Digital Plus. Off: Leaves the dynamic range uncompressed, letting you hear the original sound. On: Turns dynamic range control on for all three Dolby formats. Quieter sounds are made louder and the volume of loud sounds is reduced. Downmixing Mode Lets you select the multi-channel downmix method that is compatible with your stereo system. You can choose to have the product downmix to normal stereo or in surround compatible stereo. Audio Sync When the product is attached to a digital TV, lets you adjust the audio delay so that the audio syncs with the video. You can set the delay between 0 and 300 milliseconds. | 22 English HT-F9730W_ZC_0805.indd 22 2013-08-06 오후 1:09:07 Lets you check the current network and Internet status. Network Settings Lets you configure the network connection so you can enjoy various features such as Internet services or AllShare Wi-Fi functionality, and perform software upgrades. Wi-Fi Direct Lets you connect a Wi-Fi Direct device to the product using a peerto-peer network, without the need for a wireless router. Note that if the product is connected to a wireless network, it may be disconnected when you use Wi-Fi Direct. VOD Rating Lock | NOTES | The default security PIN is 0000. Depending on your country, this menu function may not be supported. Terms & Conditions, Privacy Policy Reset Smart Hub Settings Network Status 04 Lets you lock access to Video on Demand (VOD) content based on its rating. Network Lets you view the Smart Hub Terms and Conditions and Privacy Policy. Resets all Smart Hub settings to their default settings. | NOTES | The default security PIN is 0000. | NOTES | Text files, such as files with a .TXT or .DOC extension, will not display when you are using the Wi-Fi Direct function. AllShare Settings Lets you control which devices on your network, such as smart phones and tablets, can share content with your TV. Device Name Lets you assign an identifying name to the product. You use this name to identify the product when you are connecting external Wi-Fi devices (smart phones, tablets, etc.) to it. BD-Live Settings Lets you set various BD-Live functions. BD-Live allows you to access extra features available on some Blu-ray Discs if you are connected to the Internet. BD-Live Internet Connection : Lets you fully allow, partly allow, or prohibit a BD-Live Internet connection. BD Data Management : Manage BD data downloaded from a BDLive service or Blu-ray Disc. Smart Features Apps Settings Lets you configure App notification settings and view basic info about your Apps. Push Notification Settings : Receive notifications from selected services. Properties : See basic info about Apps. System Setup Language Lets you re-run the Initial Settings procedure. Lets you select the language you prefer for the On-Screen menu, disc menu, subtitles, etc. • The language you select for the disc menu, disc audio, or subtitles will only appear if it is supported on the disc. Lets you connect a wireless USB keyboard or mouse to the USB port on the front of the product. Keyboard Settings: Lets you configure a wireless USB keyboard connected to the product. | NOTES | You can use the keyboard only Device Manager when a QWERTY keyboard screen or window appears in the Web Browser. Mouse Settings: Lets you configure a wireless USB mouse connected to the product. You can use the mouse in the product's menu in the same way you use a mouse on your PC. To use a mouse with the product's menu: English HT-F9730W_ZC_0805.indd 23 23 | 2013-08-06 오후 1:09:07 Settings 1. Connect the USB mouse to the product. 2. Click the primary button you selected in Mouse Settings. The Simple Menu appears. 3. Click the menu options you want. General | NOTES | Some USB HID keyboards and Device Manager Security mice may not be compatible with your product. Some HID keyboard keys may not work. Wired USB keyboards are not supported. Some applications may not be supported. If a wireless HID Keyboard does not operate because of interference, move the keyboard closer to the product. Anynet+ (HDMI-CEC) Remove any disc or USB storage device. 2. Press and hold the 5 button on the front panel for 5 seconds or more. All settings will revert to the factory default settings. 1) Connect the product to an 2) Set the Anynet+ (HDMI-CEC) feature to On in both the TV and the product. 3) Search for and then select the product in the TV's Anynet+ (HDMI-CEC) list. For more exact instructions, see the Anynet+ section of the TV's user's manual. Support Remote Management When activated, lets Samsung Call Center agents diagnose and fix problems with the product remotely. Requires an active Internet connection. Remote Management service might not be available in some countries. Software Update For more information about the Software Update function, see "Upgrading Software" on page 28. Use Mode Lets you set the Use mode. If you are using the home theater at home, always select Home. Store is for retail display settings only. Contact Samsung Provides contact information for assistance with your product. | NOTES | When the factory default settings are restored, all the user stored BD data is deleted. Anynet+ is a convenient function that offers linked operations with other Samsung products that have the Anynet+ feature and lets you control those products with one Samsung TV remote. To operate this function, you must connect this product to an Anynet+ Samsung TV using an HDMI cable. If you want to use an Anynet+ (HDMI-CEC) function, please follow the instructions below. Anynet+ (HDMI-CEC)-compliant Samsung TV using HDMI Cable. The default security PIN is 0000. Enter the default PIN to access the security function if you haven't created your own PIN. BD Parental Rating: Restricts playback of Blu-ray discs with specific ratings unless the PIN entered. DVD Parental Rating: Prevents playback of DVDs with a rating above a specific numerical rating you have set unless the PIN is entered. Change PIN: Changes the 4-digit PIN used to access security functions. If you forget your PIN 1. Lets you specify the display brightness and time zone. Front Display: Lets you change the brightness of the front panel. Time Zone: You can specify the time zone that is applicable to your area. Menu Transparency: Adjust the transparency of the menu box. | 24 English HT-F9730W_ZC_0805.indd 24 2013-08-06 오후 1:09:08 By setting the Auto Sound Calibration (ASC) function just once when you relocate or install the product, you can have the product automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 7.1-channel sound field optimized for your environment. L FM ANT OPTICAL ASC IN R SPEAKERS OUT AUX IN LAN CENTER FRONT SUBWOOFER FRONT DIGITAL AUDIO IN L R FRON FRON IMPEDANCE : 3 When you connect this product to a network, you can use network based applications and functions such as Smart Hub and BD-LIVE, and upgrade the product's software through the network connection. For more information about accessing and using Internet services, see the Network Services chapter of this manual on pages 43~51. Instructions for configuring the network connection start below. Configuring Your Network Connection If you didn't configure your network connection during the initial settings procedure or you need to reset the network connection, follow the directions below. Before you begin, contact your Internet Service Provider to find out if your IP address is static or dynamic. If it is dynamic, and you have a wired or wireless network, we recommend using the Automatic configuration procedures described below. If you are connecting to a wired network, connect the product to your router using a LAN cable before you start the configuration procedure. To begin configuring your network connection, follow these steps: 1. ASC microphone 2. Select Network, and then press the E button. Select Network Settings, and then press the E button. 4. Go to the instructions for Wired networks starting below or the instructions for Wireless networks starting on page 26. Wired Network Wired – Automatic After following Steps 1 to 3 above: 1. In the Network Settings screen, change Network type to Wired. Then, select Connect and press the E button. The product detects the wired connection, verifies the network connection and then connects to the network. 2. When it is done, highlight OK, and then press E button. Running Auto Sound Calibration Before running the calibration, make sure there is no disc in the disc tray. 1. Plug the ASC microphone into the ASC IN jack. 2. Place the ASC microphone at the listening position. • Auto Sound Calibration automatically runs and calibrates speakers in the following sequence : Front L Centre Front R Surround R Front Top R Front Top L Surround L Subwoofer • Press the RETURN button to cancel the Auto Sound Calibration Setting. In the Home screen, select Settings, and then press the E button. 3. Auto Sound Calibration Select whether to run and apply automatic sound calibration. • Off: The unit produces sound according to the speaker configuration specified in Speaker Settings. • On: The unit runs Auto Sound Calibration, and then produces sound optimized for your environment, according to the calibrated speaker settings. Wired - Manual If you have a static IP address or the automatic procedure does not work, you'll need to set the Network Settings values manually. English HT-F9730W_ZC_0805.indd 25 Settings Auto Sound Calibration Networks and the Internet 04 Reset Reverts all settings to their defaults except for the network and Smart Hub settings, and then starts the Setup function. Requires that you enter your security PIN. The default security PIN is 0000. 25 | 2013-08-06 오후 1:09:08 Settings After following Steps 1 to 3 above: 1. Wireless Network In the Network Settings screen, change Network type to Wired. Then, select Connect and press the E button. The product searches for a network, and then displays the connection failed message. | NOTES | If it is possible to connect the home theater to your network wirelessly, select Change Network at this point, change the Network type to Wireless, and then go to the instructions for wireless networks on page 26. You can setup a wireless network connection in three ways: - Wireless Automatic - Wireless Manual - WPS(PBC) Before you configure the wireless network connection, disconnect any wireless network device currently connected to the product or, if applicable, the product's current wired connection. Wireless - Automatic After following Steps 1 to 3 in "Configuring Your Network Connection" on page 25: Network Settings 1. Wired network connection failed. MAC Address IP Address Subnet Mask Gateway DNS Server XX:XX:XX:XX:XX:XX 0. 0. 0. 0 0. 0. 0. 0 0. 0. 0. 0 0. 0. 0. 0 In the Network Settings screen, change Network type to Wireless. The product searches for and then displays a list of the available networks. Network Settings Unable to connect to the network. Try the following: check if your IP address is set correctly in IP Settings. Contact your Internet Service Provider for more information. Select your network type. Network type Wireless Wireless network Change Network IP Settings Retry Close si-ap iptime 2. 3. Select the IP Setting field, and then set it to Enter manually. 4. Select a value to enter (IP Address, for example), and then press E. Use the number keypad on your remote control to enter the numbers for the value. You can also enter numbers using the ▲▼ buttons. Use the ◄► buttons on the remote control to move from entry field to entry field within a value. When done with one value, press the E button. 5. 6. Press the ▲ or ▼ button to move to another value, and then enter the numbers for that value following the instructions in Step 4. Repeat Steps 4 and 5 until you have filled in all values. You can connect your Blu-ray player to the internet. Please select which wireless network to use. iptime5G Use the ◄► buttons to select IP Settings, and then press the E button. The IP Settings screen appears. KIMING_VTOWER TIAS Refresh WPS(PBC) 2. Select the desired network, and then press the E button. 3. On the Security screen, enter your network's security code or pass phrase. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with ▲▼◄► buttons, and then pressing E button. 4. When finished, select Done, and then press the E button. The product verifies the network connection and then connects to the network. | NOTES | | NOTES | You can get the Network values from your Internet provider. 7. You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem. When finished entering all the values, select OK, and then press the E button. The home theater verifies the network connection and then connects to the network. | 26 English HT-F9730W_ZC_0805.indd 26 2013-08-06 오후 1:09:10 | NOTES | 1. You can get the Network values from your Internet In the Network Settings screen, change Network type to Wireless. The product searches for and then displays a list of the available networks. 2. Scroll through the list, select the desired network or Add Network, and then press the E button. 3. If you selected a network in Step 2, go to Step 6. If you selected Add Network, go to Step 4. 4. Enter your wireless network or wireless router's name. • Enter numbers directly using the number buttons on your remote control. • Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button. • To display capital letters (or redisplay small letters if capital letters are displayed), select , and then press the E button. • To display symbols and punctuation, select 123#&, and then press the E button. To redisplay letters, select 123#&, and then press the E button. When finished, select Done, and then press the E button. 5. 6. 7. 8. On the Security type screen that appears, use the ▲▼buttons to select the network's Security type, and then press the E button. On the next screen, enter your network's security code or pass phrase. • Enter numbers directly using the number buttons on your remote control. • Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button. When finished, select Done, and then press the E button. The product searches for the network. The Network connection fail screen appears. Use ◄► buttons to select IP Settings, and then press the E button. Select the IP Setting field, and then set it to Enter manually. Select a network value to enter (IP Address, for example), and then press E button. Use the number keypad on your remote control to enter the numbers for the value. You can also enter numbers using the ▲▼ buttons. Use the ◄► buttons on the remote control to move from entry field to entry field within a value. When done with one value, press the E button. Press the ▲ or ▼ button to move to another value, and then enter the numbers for that value following the instructions in Step 8. 10. Repeat Steps 8 and 9 until you have filled in all values. provider. 11. When finished, select OK, and then press the E button. The Security Screen appears. 12. On the Security screen, enter your network's Security Code or Pass Phrase. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button. 13. When finished, select Done at the right of the screen, and then press the E button. The product verifies the network connection and then connects to the network. 14. After the home theater verifies the network, select OK, and then press the E button. | NOTES | You can also begin the Manual Network setting by going to Settings >Network > Network Status. WPS(PBC) One of the easiest ways to set up the wireless network connection is using the WPS(PBC) function. If your wireless router has a WPS(PBC) button, follow these steps: After following Steps 1 to 3 in "Configuring Your Network Connection" on page 25: 1. In the Network Settings screen, change Network type to Wireless. The product searches for and then displays a list of the available networks. 2. Scroll the list down, select WPS(PBC), and then press the E button. 3. Press the WPS(PBC) button on your router within two minutes. Your product automatically acquires all the network settings values it needs and connects to your network. The product connects to the network after the network connection is verified. 4. When it is done, highlight OK, and then press E button. | NOTES | For a WPS connection, set your wireless router’s security encryption to AES. WEP security encryption does not support a WPS connection. English HT-F9730W_ZC_0805.indd 27 Settings 9. 04 Wireless - Manual If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually. After following Steps 1 to 3 in "Configuring Your Network Connection" on page 25: 27 | 2013-08-06 오후 1:09:11 Settings 3. Wi-Fi Direct The Wi-Fi Direct function allows you to connect Wi-Fi Direct devices to the product and each other using a peer-to-peer network, without a wireless router. • The PBC and PIN procedures connect devices automatically. | NOTES | Some Wi-Fi Direct devices may not support the AllShare function if connected via Wi-Fi Direct. If this is the case, change the network connection method you used to connect the device to the home theater. Wi-Fi Direct transmissions can interfere with Bluetooth signals. Before you use the Bluetooth function, we strongly recommend that you turn off the Wi-Fi Direct function on any device in which it is currently on. 1. Turn on the Wi-Fi direct device and activate its Wi-Fi Direct function. 2. In the Home screen, select Settings, and then press the E button. 3. Select Network, and then press the E button. 4. Select Wi-Fi Direct, and then press the E button. The Wi-Fi Direct devices that you can connect appear. Through the Product Using PBC 1. Select the Wi-Fi Direct device you want to connect to this product, and then press the E button. 2. The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected. Through the Product Using a PIN 1. 2. 3. 4. Wi-Fi Direct Device Name : [HTS]F9730W Select your Wi-Fi Direct device to connect to. AndroidXXXXXXX The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected. Disconnected Select the Wi-Fi Direct device you want to connect to this product, and then press the E button. The PIN pop-up appears. Note the PIN code in the pop-up, and then enter it into the appropriate field in the Wi-Fi Direct device you want to connect. The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected. | NOTES | The current wired or wireless network connection Refresh Close 5. You have three ways to complete the Wi-Fi connection: • Through the Wi-Fi device. • Through the product using PBC. • Through the product using a PIN. will be disconnected when you use the Wi-Fi Direct function. Text files, such as files with a .TXT or .DOC extension, will not display when you are using the Wi-Fi Direct function. Upgrading Software The Software Update menu allows you to upgrade the product’s software for performance improvements or additional services. Each is covered below. • Never turn the product off or back on manually during the update process. Through the Wi-Fi Device 1. 2. On the Wi-Fi device, follow the device's procedure for connecting to another Wi-Fi Direct device. See the device's user manual for instructions. When you have completed the procedure, you should see a pop-up on your TV screen saying that a device that supports Wi-Fi Direct has requested to connect. Select OK, and then press the E button to accept. 1. In the Home menu, select Settings, and then press the E button. 2. Select Support, and then press the E button. 3. Select Software Update, and then press the E button. 4. To download update software and update now, select Update now, and then press the E button. See "Update now" on next page for details. | 28 English HT-F9730W_ZC_0805.indd 28 2013-08-06 오후 1:09:12 5. 2. The upgrade is complete when the product turns off, and then turns on again by itself. Samsung Electronics takes no legal responsibility for product malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade. If you want to cancel the upgrade while the upgrade software is downloading, press the E button. When a system upgrade is in progress, "UPDATE" is displayed on the front panel. | NOTES | To use the Auto Update function, your product must be connected to the Internet. Update by USB 1. Visit www.samsung.com. 2. Click SUPPORT on the top right of the page. 3. Enter the product's model number into the search field. As you enter the model number, a drop down will display products that match the model number. 4. Left click your product's model number in the drop down list. 5. On the page that appears, scroll down to and then click Firmware Manuals & Downloads. Update now You can use Update now to update the software through your network connection or by using a USB flash drive. The network instructions are below. The USB flash drive instructions are on this page. 1. 2. 3. 4. 5. 6. 7. Select Update now, and then press the E button. The Update now pop-up appears. The product searches on line for the latest software version. If it does not find an update, the "There are no new updates for you at the moment." pop-up appears. Press the E button to exit. If it finds a new version, the Update Request popup appears. Select OK. The product upgrades the software, turns off, and then turns on automatically. If you do not select OK or Cancel in one minute, the product stores the new upgrade software. You can upgrade the software later using Auto Update. If you select Cancel, the product cancels the upgrade. 6. Click Firmware in the center of the page. 7. Click the ZIP button in the File column on the right side of the page. 8. Click Send in the first pop-up that appears. Click OK in the second pop-up to download and save the firmware file to your PC. 9. Unzip the zip archive to your computer. You should have a single folder with the same name as the zip file. 10. Copy the folder to a USB flash drive. 11. Make sure no disc is inserted in the product, and then insert the USB flash drive into the USB port of the product. 12. In the product’s menu, go to Settings > Support > Software Update. | NOTES | 13. Select Update now. When the system upgrade is done, check the 14. The product searches for the software on the USB drive. When it finds the software, the Update Request pop-up appears. software details in the Product Information section of the Contact Samsung screen. Do not turn off the product during the Software Upgrade. It may cause the product to malfunction. Auto Update You can set the Auto Update function so that the product downloads new upgrade software when it is in Auto Update mode. In Auto Update mode, the product is off, but its Internet connection is active. This allows the product to download upgrade software automatically, when you are not using it. 1. Press the ▲▼ buttons to select Auto Update Mode, and then press the E button. 15. Select OK. The product upgrades the software, turns off, and then turns on automatically. | NOTES | There should be no disc in the product when you upgrade the software using the USB jack. When the system upgrade is done, check the software details in the Product Information section of the Contact Samsung screen. Do not turn off the product during the software upgrade. It may cause the product to malfunction. Software upgrades using the USB jack must be performed with a USB flash drive only. English HT-F9730W_ZC_0805.indd 29 Settings | NOTES | Select On or Off. If you select On, the product will automatically download new upgrade software when it is in Auto Update mode with the power off. If it downloads new upgrade software, the product will ask you if you want to install it when you turn the product on. 04 To let the product download update software automatically when available, select Auto Update, and then press the E button. See "Auto Update" on this page for details. 29 | 2013-08-06 오후 1:09:14 Media Play Your home theater can play content located on Blu-ray/ DVD/CD discs, USB devices, PCs, smart phones, tablets, and on the Web. To play content located on your PC or a mobile device, you must connect the PC or mobile device and the product to your network. To play content on your PC, you must also download and install AllShare network software or already have DLNA network software on your PC. Method 1 1. Turn the product on. 2. Connect the USB device to the USB port on the front panel of the product. The New Device Connected pop-up appears. | NOTES | PCs running Windows 7 and Windows 8 have DLNA Movies & TV V Shows software (Play To) built in. Apps New device connected. USB Flash Disk Pho Photos, Videos Vide e & Music Muss Photos The All Content Screen Videos Music All Content For all media, the All Content screen or one of its sub screens is your primary means of accessing and playing contents saved on a variety of devices, either connected directly or using your network. Using the All Content Screen To access the All Content screen, select Photos, Videos & Music on the Home screen, and then press the E button. Add App Press the button to open the disc tray. 2. Place a disc gently into the disc tray with the disc’s label facing up. 3. Press the button to close the disc tray. Playback starts automatically. 4. If playback does not start automatically, press the 6 button on the remote or see “The All Content Screen” above. Add App Web Browser Settings | NOTES | If the pop-up does not appear, go to Method 2. 3. Playing Commercial Discs 1. Add App Use the ▲▼ buttons to select Photos, Videos, Music or All Content, and then press the E button. Depending on how the contents are arranged, you will see either folders, individual files, or both. | NOTES | Even though the product will display folders for all content types, it will only display files of the Content Type you selected in Step 3. For example, if you selected Music, you will only be able to see music files. You can change this selection by returning to the Photos, Videos & Music screen, and then going to Step 4 in Method 2 below. 4. If necessary, use the ▲▼◄► buttons to select a folder, and then press the E button. 5. Select a file to view or play, and then press the E button. 6. Press the RETURN button to exit a folder or the Exit button to return to the Home screen. 7. Go to pages 32~40 for instructions that explain how to control playback of videos, music, and pictures on a USB device. Playing Files on a USB Device There are two methods you can use to play or view multimedia files located on a USB device through your product. | 30 English HT-F9730W_ZC_0805.indd 30 2013-08-06 오후 1:09:14 Method 2 2. Connect the USB device to the USB port on the front panel of the product. 3. Select Photos, Videos & Music on the Home screen, and then press the E button. 4. Select Photos, Videos, Music or All Content, and then press the E button. Depending on how the contents are arranged, you will see either folders, individual files, or both. | NOTES | Even though the product will display folders for all content types, it will only display files of the Content Type you selected in Step 4. For example, if you selected music, you will only be able to see music files. You can change this selection by returning to the Photos, Videos & Music screen and repeating Step 4. 5. Use the ◄► buttons to select the desired device and then press the E button. 6. If necessary, use the ▲▼◄► buttons to select a folder, and then press the E button. 7. Press the RETURN button to exit a folder or the Exit button to return to the Home screen. 8. Go to pages 32~40 for instructions that explain how to control playback of videos, music, and pictures on a USB device. | NOTES | If you insert a disc when playing a USB device or phone, the device mode changes to "Disc" automatically. If your cellular phone is DLNA compatible, you can play contents without connecting a USB cable. See "Using the AllShare Network Function" on page 31. Playing a Disc with User Recorded Content Even though the product will display folders for all content types, it will only display files of the Content Type you selected in Step 2. For example, if you selected music, you will only be able to see music files. You can change this selection by returning to the Photos, Videos & Music screen and repeating Step 2. 3. A screen appears listing the contents of the disc. Depending on how the contents are arranged, you will see either folders, individual files, or both. 4. If necessary, use the ▲▼◄► buttons to select a folder, and then press the E button. 5. Use the ▲▼◄► buttons to select a file to view or play, and then press the E button. 6. Press the RETURN button one or more times to exit a current screen, exit a folder, or to return to the Home screen. Press the Exit button to return directly to the Home Screen. 7. Go to pages 32~40 for instructions that explain how to control playback of videos, music, and pictures on a disc. Media Play Turn the product on. 05 1. | NOTES | Using the AllShare Network Function AllShare lets you play Photos, Videos, or Music located on your PC or your DLNA compatible device through the product using a wireless network connection. To Download the AllShare Software AllShare makes it easy to retrieve and enjoy media files from computers and DLNA-enabled devices. However, computers need to be installed with AllShare PC and mobile devices need to support AllShare. For more information, visit the Samsung Content & Service portal (http://link.samsung.com). | NOTES | You may experience compatibility issues when You can play multimedia files you have recorded on Bluray, DVD, or CD discs. 1. Place a user recorded disc into the disc tray with the disc’s label facing up, and then close the tray. The Device Connected pop-up appears. 2. Use the ▲▼ buttons to select the type of content you want to view or play - Photos, Videos, or Music - and then press the E button. attempting to play media files via a third-party DLNA server. English HT-F9730W_ZC_0805.indd 31 31 | 2013-08-06 오후 1:09:17 Media Play Playing Content Located on Your PC or DLNA Device through the Product PC 1. Connect the product, your PC, and your DLNA compatible cellular phone to the same wireless network. 2. Follow the directions in the AllShare software Installation/Instruction manual to set up devices and files for playing or viewing. 3. On your computer, using the AllShare software, confirm your phone is connected. 4. On the phone, select the file you want to view or play, and then select the home theater system as the playback device. 5. On the phone, start playback. Product Play back PC's files AllShare Connection 1. Connect the product, your PC, and/or your DLNA compatible device to the same wireless network. 2. Follow the directions in the AllShare software Installation/Instruction manual to set up devices and files for playing or viewing. 3. Select Photos, Videos & Music on the product's Home screen, and then press the E button. The Photos, Videos & Music screen appears. 4. Select the type of content you want to play Photos, Videos, Music, or All Content - and then press the E button. 5. On the next screen, select AllShare, and then press the E button. 6. In the list of AllShare connected devices that appears, select your PC or other AllShare compatible device, and then press the E button. A screen listing the available files appears. Controlling Video Playback You can control the playback of video content located on a Blu-ray/DVD disc, USB device, mobile device or PC. Depending on the disc or contents, some of the functions described in this manual may not be available. Buttons on the Remote Control used for Video Playback DISC MENU POPUP 1 2 MUTE FULL SCREEN 7. TITLE MENU 0 Select the file you want to play or view, and then press the E button. HOME REPEAT 3 1 Using the disc menu, title menu, popup menu and title list Controlling the Playback of Content Located on Your PC with Your Smart Phone DISC MENU During playback, press this button to display the Disc menu. TITLE MENU During playback, press this button to display the Title menu. • If your disc has a playlist, press the View button to go to the playlist. POPUP MENU During playback, press this button to display the Popup menu. PC Product 5V 0.5A Play back PC's files AllShare Connection Control PC's files to Product Smart Phone (Only available with Samsung phones supporting AllShare functionality.) | 32 English HT-F9730W_ZC_0805.indd 32 2013-08-06 오후 1:09:20 Starts playback. 5 Stops playback. 7 Pauses playback. Fast Motion Play During playback, press the 3 or button. Each time you press the 3 or button, the playback speed will change. Slow Motion Play In pause mode, press the button. Each time you press the button, the playback speed will change. Step Motion Play In pause mode, press the 7 button. Each time you press the 7 button, a new frame appears. Skip Motion Play During playback, press the 1 or 2 button. Each time you press the 1 or 2 button, the disc moves to the previous or next chapter or file. Depending on the disc, the screen may not display all repeat options. The screen may not display Chapter or Title immediately. Continue to press the ▲▼ buttons until your choice is inside the applicable field. To return to normal play, press the REPEAT button again, press the ▲▼ buttons to select Off, and then press the E button. The screen may not display Repeat A-B immediately. Continue to press the ▲▼ buttons until Repeat A-B is inside the applicable field. You must set point (B) at least 5 seconds of playing time after point (A). Using the TOOLS Menu During playback, press the TOOLS button. Play from the Beginning During playback, press the REPEAT button on the remote control. 2. Press the ▲▼ buttons to select Off, Title, Chapter, All or Repeat A-B then press the E button. 3D 2. only. If you apply the Side by Side or Top Bottom format to 2D content, it will not be displayed properly. You can use the Search Scene function during playback to view or start a movie from the scene of your choice. Press the E button at the point where you want repeat play to start (A). Press the E button at the point where you want repeat play to stop (B). 3. To return to normal play, press the REPEAT button again. 4. Press the E button. | NOTES | Use 3D menu for 3D content Repeat A-B 1. Select to return to the beginning of the movie, and then press the E button. Use 3D menu to select Side by Side or Top Bottom option if the 3D content currently playing does not properly appear in 3D mode. 3 Repeat Playback 1. | NOTES | If the index information in the file Search Scene is damaged or the file does not support indexing, you will not be able to use the Search Scene function. If you are using the DLNA function after connecting to a computer through your network, Search Scene may not be supported. English HT-F9730W_ZC_0805.indd 33 Media Play 6 | NOTES | 05 2 Playback related buttons The product does not play sound in Search, Slow, or Step mode. • To return to normal speed playback, press the 6 button. 33 | 2013-08-06 오후 1:09:26 Media Play | NOTES | If there is more than one movie on the disc or device, select to start a different title. Search Titles 1. Select Search Titles, and then press the E button. 2. Use the ▲▼ buttons to select a title, and then press the E button. You must set point (B) at least 5 seconds of playing time after point (A). Select to play the chapter of your choice. Search Chapters 1. Select Search Chapters, and then press the E button. 2. Use the ▲▼ buttons to select a chapter, and then press the E button. Picture Mode | NOTES | When you use the BD Wise Select to play the movie from a selected time point. 1. Select Search Time bar, and then press the E button. 2. Using the number buttons, enter the time point you want to go to, and then press the E button. Search Time bar function, this menu will not appear. Equalizer Mode Repeat Mode 1. 2. 3. Press the ▲▼ buttons to select repeat A-B, and then press the E button. Press the E button at the point where you want repeat play to start (A). Let the movie play. Press the E button at the point where you want repeat play to stop (B). | NOTES | It only appears when equalizer mode is on. You can also use the ◄► Select to repeat a title, chapter, or specific section. - Off : Select to return to normal playback. - Title : Choose to repeat a selected title. - Chapter : Choose to repeat a specific chapter. - Repeat A-B : Choose to repeat a specific section. Select to use the Equalizer. Select to set the Equalizer. Equalizer Settings | NOTES | buttons to advance or rewind the movie. The movie advances or rewinds one minute each time you press the ◄► buttons. Select to set the picture mode. - Dynamic : Increases sharpness and brightness. - Standard : Choose this setting for most viewing applications. - Movie : The best setting for watching movies. - User : Lets you adjust the sharpness and noise reduction function respectively. Audio Select to set the desired audio language. Audio Sync In some cases when the product is connected to a digital TV, the audio signal may not synchronize with the video signal. If this occurs, adjust the audio delay time to match the video signal. Subtitle Select to set the desired subtitle language. - You can also operate this function by pressing the SUBTITLE button on the remote control. Subtitle Settings Select to set the desired subtitle options. Angle To view a scene from another angle. The Angle option displays the number of angles available to view (1/1, 1/2, 1/3, etc.). BONUSVIEW Video BONUSVIEW Audio Select to set the desired Bonusview option. | 34 English HT-F9730W_ZC_0805.indd 34 2013-08-06 오후 1:09:26 Full Screen You can control the playback of music content located on a DVD, CD, USB, mobile device or PC. Depending on the disc or contents, some of the functions described in this manual may not be available. | NOTES | Depending on the disc or storage device, the Tools menu may differ. Video files with high bitrates of 20Mbps or more strain the product’s capabilities and may stop playing during playback. Using the View & Options Menus Buttons on the Remote Control used for Music Playback 1 On the screen that lists the video files, use the ▲▼◄► buttons to select View or Options in the upper right, and then press the E button. Videos Date View Displays all the folders with videos by date. If you select a folder, and then press E button, displays all the videos in the folder by date. Title Displays all the video files on the media or storage device by title. Folder Displays all the folders on the media or storage device. Play Selected Play Selected lets you create a playlist by selecting specific files to play. It works essentially the same way for all media. See Creating a Playlist from a CD on page 37. 1 2 3 4 5 6 7 8 DISC MENU 9 TITLE MENU 0 POPUP 4 2 3 Media Play Select to view video file information. Controlling Music Playback 05 Information Select to set the size of the video image. Choose Original, Mode1 (larger), or Mode2 (largest). 5 6 MUTE 1 NUMBER buttons : If numbered tracks are displayed, press the number of a track. The selected track is played. 2 1 2 buttons : Move to the previous/next track. 3 5 button : Stops a track. 4 Fast Play (Audio CD (CD-DA) only) During playback, press the 3 or button. Each time you press the 3 or button, the playback speed will change. 5 7 button : Pauses a track. 6 6 button : Plays the currently selected track. Options Send Select Send to upload selected files to apps (Picasa, Facebook etc) or devices. To use Send, you need to establish an account with the on-line site, and then log in using the Log In function. Music Screen Controls Options | NOTES | Depending on the disc or storage device, the Options View menus may differ. All options may not be displayed. The View and Options menus are usually available when you are viewing video files on a USB flash drive, a PC, a disc you recorded yourself, or a mobile device. They are usually not available if you are viewing a commercial Blu-ray, DVD, or CD disc. TRACK 001 00:09 00:43 off off TRACK 001 00:43 TRACK 002 03:56 TRACK 003 04:41 TRACK 004 04:02 TRACK 005 03:43 TRACK 006 03:40 TRACK 007 04:06 TRACK 008 03:52 TRACK 009 03:04 TRACK 010 04:02 English HT-F9730W_ZC_0805.indd 35 35 | 2013-08-06 오후 1:09:27 Media Play Play Selected Play Selected lets you create a playlist by selecting specific files to play. It works essentially the same way for all media. See Creating a Playlist on an Audio CD on page 37. Send Select Send to upload selected files to apps (Picasa, Facebook, etc.) or devices. To use Send, you need to establish an account with the on-line site, and then log in using the Log In function. Ripping The Ripping function converts CD audio to the mp3 format and saves the converted files on a USB device or the mobile device connected to the product. See Ripping on page 37. Pause a track. Play a track. Move to the previous track. Move to the next track. Rewind the track. Advance the track. , 1 Repeat one track or all tracks. Play tracks in random order. Options Display the Equalizer. Adjust the equalizer manually. (Only when equalizer mode is on) To access the controls, play a track, and then use the ▲▼◄► buttons to move to the control of your choice. | NOTES | The Music Screen controls are only accessible when a track is playing. Information All controls do not appear at the same time. Using the View & Options Menus On the screen that lists the music files, use the ▲▼◄► buttons to select View or Options in the upper right, and then press the E button. Encoding View Displays all the music tracks on the media or storage device. Album Displays all the music on the media or storage by album. Artist Displays all the music files on the media or storage device by artist Genre Displays all music on the media or storage by genre. Folder Displays all the folders on the media or storage device. Select to manage the text encoding options. | NOTES | Depending on the disc or storage device, the Options menu may differ. All options may not be displayed. Music Track Select to see content information. Repeating Tracks on an Audio CD You can set the product to repeat tracks on an audio CD (CD-DA/MP3). 1. During playback, use the ▲▼◄► buttons to select in the lower left corner of the screen, and then press the E button. 2. Use the ▲▼ to select the Repeat mode you want - Off, One Song, or All - and then press the E button. | 36 English HT-F9730W_ZC_0805.indd 36 2013-08-06 오후 1:09:30 ~ Use Deselect All to deselect all selected tracks at 00:09 00:43 off off 00:43 TRACK 002 03:56 TRACK 003 04:41 TRACK 004 04:02 TRACK 005 03:43 TRACK 006 03:40 TRACK 007 04:06 TRACK 008 03:52 TRACK 009 03:04 TRACK 010 04:02 Shuffling Tracks on an Audio CD Ripping 1. Insert a USB device into the USB jack on the front of the product. 2. With the Playback screen displayed, select the Options button and then press the E button. The Options menu appears. 3. Use the ▲▼ buttons to select Ripping, and then press the E button. The Ripping screen appears. Use the ▲▼ buttons to select a track, and then press the E button. A check appears to the left of the track. Repeat Step 4 to select and check additional tracks. To remove a track from the list, move to the track, and then press the E button again. The check on the track is removed. When done, select the Rip button using the ▲▼ buttons, and then press the E button. The Rip pop-up appears. Use the ▲▼ buttons to select the device to store the ripped files on, and then press the E button. You can set the product to play tracks on an audio CD (CD-DA/MP3) at random. 1. 2. During playback, use the ▲▼◄► buttons to select in the lower left corner of the screen, and then press the E button. Use the ▲▼ to set the Shuffle mode Off or On, and then press the E button. Creating a Playlist from a CD 1. 2. 3. 4. 5. 6. With the Playback screen displayed, select the Options button and then press the E button. The Options menu appears. Use the buttons to select Play Selected , and then press the E button. The Play Selected screen appears. Use the buttons to select a track, and then press the E button. A check appears to the left of the track. Repeat Step 3 to select and check additional tracks. To remove a track from the list, move to the track, and then press the E button again. The check on the track is removed. When done, press the buttons to select Play, and then press the E button. The Music Playback screen reappears listing only the tracks you checked. The selected tracks play automatically. | NOTES | You can create a playlist with up to 99 tracks from Audio CDs (CD-DA). If you have created a playlist, Play Selected is replaced by Edit Playlist on the Options menu. On the Play Selected screen, you can also choose Select All, Deselect All, and Cancel. ~ Use Select All to select all tracks. This cancels your individual track selections. When you press the RETURN button on your remote or select Play and then press the E button, all tracks will appear on the Music Playback screen, and the product will begin to play all tracks from Track 001. 4. 5. 6. 7. 8. | NOTES | Do not disconnect the device while ripping is in 9. progress. If you want to cancel ripping, press the E button and then select Yes. Select No to continue ripping. 10. When ripping is complete, the “Successfully Ripped.” message appears. Press the Ebutton. 11. Press the RETURN button to go back to the Playback screen. | NOTES | This function is not available with DTS Audio CDs. This function may not be supported by some discs. Ripping encodes music to the .mp3 format at 192kbps. On the Ripping screen, you can also choose Select All or Clear All. - Use Select All to select all tracks and press the E button. This cancels your individual track selections. - Use Clear All to deselect all selected tracks at once. English HT-F9730W_ZC_0805.indd 37 Media Play TRACK 001 TRACK 001 05 once. Then, select individual tracks or use Select All to select all the tracks, and then press the RETURN button on your remote or select Play and then press the E button. If you do not use Select All or select individual tracks, the Playlist will not change. ~ Cancel cancels any changes you made on the Play Select screen. When you return to the Playback screen, the Playlist will be unchanged. Options 37 | 2013-08-06 오후 1:09:32 Media Play Using Bluetooth 1. You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires! Press the FUNCTION button on the remote control of the product to display the BT message. 2. Select the Bluetooth menu on the Bluetooth device you want to connect. For instructions, refer to the Bluetooth device's manual. 3. Select the Stereo headset menu on the Bluetooth device. • You will see a list of devices. 4. Select "[HTS]Fxxxxx" from the searched list. What is Bluetooth? Bluetooth is a technology that enables Bluetoothcompliant devices to interconnect with each other easily using a short wireless connection. • A Bluetooth device may hum or malfunction: - When a part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the Home Theater. - When it is subject to electrical variation from obstructions caused by a wall, corner or office partitioning. - When it is exposed to electrical interference from same frequency-band devices including medical equipment, microwave ovens, and wireless LANs. • Pair the Home Theater with the Bluetooth device while the two are close together. • The further the distance is between the Home Theater and the Bluetooth device, the worse the quality is. If the distance exceeds the Bluetooth operational range, the connection is lost. • In poor reception-sensitivity areas, the Bluetooth connection may not work properly. • The Home Theater has an effective reception range of up to 32.8 feet in all directions if there are no obstacles. The connection will be automatically cut off if the device is out of this range. Even within this range, the sound quality may be degraded by obstacles such as walls or doors. • This wireless device may cause electrical interference. during its operation. To connect the Home Theater to a Bluetooth device • When the Home Theater is connected to the Bluetooth device, the device name of the connected Bluetooth device, followed by the name of home theater will appear on the front display of home theater. 5. Play music on the connected device. • You can listen to the music playing on the connected Bluetooth device over the Home Theater system. | NOTES | The Home Theater only supports Middle Quality SBC data (up to 237kbps@48kHz), and does not support High Quality SBC data ([email protected]). The AVRCP feature is supported. It's functionality will differ, depending on the specifications of the connected device. Connect only to a Bluetooth device that supports the A2DP Profile. Only one Bluetooth device can be paired at a time. The search or connection functions may not work properly in the following cases: - If there a strong electric field near or around the home theater. - If several Bluetooth devices are simultaneously paired with product. - If the Bluetooth device is turned off, not in place, or malfunctions. - Note that such devices as microwave ovens, wireless LAN adapters, fluorescent lights, and gas stoves use the same frequency range as the Bluetooth device, and can cause electric interference. Connect Bluetooth device Check if the Bluetooth device supports the Bluetooth compliant stereo headset function. To disconnect the Bluetooth device from the Home Theater You can disconnect the Bluetooth device from the Home Theater. For instructions, refer to the Bluetooth device's manual. • When the Home Theater is disconnected from the Bluetooth device, the Home Theater will display DISCONNECTED on the front display. | 38 English HT-F9730W_ZC_0805.indd 38 2013-08-06 오후 1:09:34 To disconnect the Home Theater from the Bluetooth device SMART MANUAL Using NFC pairing, you can easily connect your home theater to an NFC compatible Bluetooth source device for music listening. Initial Pairing To pair NFC devices with your Home Theater, you first must pair the remote control and the Home Theater. Pairing occurs automatically when you press any button on the remote after turning on the Home Theater for the first time. When the pairing is completed, REMOTE PAIRED is displayed on the front display within max 20 seconds. SUBTITLE SOUND EFFECT Pairing an NFC Device with the Home Theater 1. Turn on your NFC compatible Bluetooth device and make sure its screen is unlocked. • NFC pairing becomes unavailable if the device’s screen lock is enabled. 2. on the home theater remote’s Gently touch the rear side with the NFC compatible Bluetooth device. In Bluetooth connection mode, the Bluetooth Using NFC (Near Field Communication) AUDIO PRESET Media Play HUB | NOTES | connection will be lost if the distance between the Home Theater System and the Bluetooth device exceeds 32.8 feet. When the Bluetooth device comes back into effective range or you restart the Bluetooth device, you have to pair the device and home theater again to reconnect. In Bluetooth mode, the screen saver will start if the Bluetooth device stays in the Ready state for 5 minutes. To reconnect the Bluetooth device, turn off the screen saver, and then connect the device. To turn off the screen saver, press any button on the remote control (the Volume button, a number button, etc.) SEARCH S/W LEVEL 3D SOUND 05 Press the ( ) button on the front panel of the Home Theater to switch from BT to another mode or turn off the Home Theater. • Except when you disconnect the home theater by changing functions, the connected Bluetooth device will wait a certain time for a response from the Home Theater before terminating the connection. (Disconnection time may differ, depending on the Bluetooth device.) When the re-pairing is completed, REMOTE PAIRED is displayed on the front display. | NOTES | This pairing feature works only if the home theater is 3. 4. turned on. On the NFC compatible Bluetooth device’s screen, a message to confirm pairing appears. Select "Yes". • Once pairing is complete the “Paired.” Message appears. To cancel NFC pairing, gently touch the on the home theater remote’s rear side with the device again. • To pair another NFC device with the home theater if it is already paired to a device: on the home theater Gently touch the remote’s rear side with the new NFC compatible device. The home theater cancels the existing connection and pairs with the new device. | NOTES | The NFC feature is available in the Android 4.1x ‘Jelly Bean’ version or later. - This feature is supported by NFC module installed devices with Android v4.1 ‘Jelly Bean' only. Jelly Bean 4.1.X: Switches to BT mode upon Tagging. Jelly Bean 4.2.X: Switches to BT mode and begins Music playback upon Tagging. The actual location of the NFC antenna varies from If the pairing is failed, you must re-pair it manually. To pair NFC devices with your Home Theater again, press and hold the both PRESET and EFFECT buttons simultaneously for more than 2 second after 35 seconds from power on. device to device. Before connecting, confirm the location of your device’s antenna. If the pairing device is covered by or inside a thick case/housing, pairing may not be easy. The is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. English HT-F9730W_ZC_0805.indd 39 39 | 2013-08-06 오후 1:09:35 Media Play Playing Photo Contents You can play photo contents located on a DVD, USB, mobile device, or PC. Using the Tools Menu To enable the background music function, the photo file must be in the same storage media as the music file. However, the sound quality can be affected by the bitrate of the MP3 file, the size of the photo, and the encoding method. You can't enlarge the subtitle and PG graphic in the full screen mode. During playback, press the TOOLS button. Previous Select to move to the previous picture. Next Select to move to the next picture. Start / Stop Slide Show Select to play/pause the slide show. Slideshow Settings Speed : Select to set a slide show's speed. Effects : Select to set a slide show's special effects. Using the View and Options Menus When the Photo File List is Displayed Photos View Zoom Select to enlarge the current picture. (Enlarge up to 4 times) Rotate Select to rotate the picture. (This will rotate the picture either clockwise or counter clockwise.) Background Music Settings Select to listen to music while viewing a slide show. Picture Mode - Dynamic : Choose to increase sharpness. - Standard : Choose for most viewing applications. - Movie : This is the best setting for watching movies. - User : Lets you adjust the sharpness and noise reduction function respectively. Information : Shows the picture information. Equalizer Mode Customize your own personal sound preferences using the equalizer settings. Equalizer Settings This function is only available when Equalizer Mode is On. Options | NOTES | Date Groups all the photo files on the media or storage device by Date. Click a group to see the photos in that group. Title Displays all the photo files on the media or storage device by title. Folder Displays all the folders on the media or storage device. Slide Show Starts the slide show. Shows all the files in the current folder, one after another. If you want to create a slide show with a selected group of photos, see Play Selected below. Play Selected Play Selected lets you create a playlist by selecting specific files to play. It works essentially the same way for all media. See Creating a Playlist on an Audio CD on page 37. Send Select Send to upload selected files to on line sites (Picasa, Facebook, etc.) or devices. To use Send, you need to establish an account with the on-line site, and then log in using the Log In function. Depending on the disc or storage device, the Options menu may differ. All options may not be displayed. | NOTES | Depending on the disc or storage device, the Options menu may differ. All options may not be displayed. | 40 English HT-F9730W_ZC_0805.indd 40 2013-08-06 오후 1:09:37 Listening to Radio Using the Special Effects Remote Control Buttons 05 Using Buttons on the Remote Control 2. SOUND Press the FUNCTION button to select FM. Tune to the desired station. • Preset Tuning 1 : Press the 5 button to select Preset and then press the TUNING/CH (,.) button to select the preset station. - Before you can tune to preset stations, you must add preset stations to the product's memory. See Presetting Stations below. • Manual Tuning : Press the 5 button to select Manual and then press the TUNING/CH (,.) button to tune to a lower or higher frequency. • Automatic Tuning : Press the 5 button to select Manual and then press and hold the TUNING/ CH (,.) button to automatically search the band. Setting Mono/Stereo Press the MO/ST button. • Each time you press the button, the sound switches between STEREO and MONO. • In a poor reception area, select MONO for a clear, interference-free broadcast. SOUND EFFECT Function Media Play 1. EFFECT Lets you select a mode that optimizes the sound. 1. Press the SOUND EFFECT button. 2. Press the ▲▼ buttons to select the desired mode: DSP, Dolby Pro Logic II, or SFE Mode. 3. Press the ◄► buttons to select the desired sound effect. DSP MP3 Enhancer Power Bass Football Off • MP3 Enhancer : Helps enhance your sound experience (ex. mp3 music). You can upscale your MP3 level sound (24 kHz, 8bit) to CD level sound (44.1 kHz, 16bit). • Power Bass : Increases the volume level of bass tones and provides thudding sound effects. • Football : Creates a more dynamic, realistic, stadium like sound. For listening to football, soccer, and other sporting events. • Off : Select for normal listening. Presetting Stations Dolby Pro Logic II Example : Presetting FM 89.10 into memory. Movie Music Game Matrix Pro Logic Off • Movie : Adds realism to a movie soundtrack. • Music : When listening to music, you can experience each song or piece as if you are listening to an actual performance. • Game : Enhances the excitement of a game’s sound. • Matrix : Select to hear multi channel surround sound. • Pro Logic : Select to listen to a 2CH sound source in 5.1CH surround sound with all speakers active. - A specific speaker(s) may not output depending on the input signal. • Off : Select for normal listening. 1. Press the FUNCTION button to select FM. 2. Press the TUNING/CH (,.) button to select <89.10>. 3. Press the TUNER MEMORY button. • NUMBER flashes on the display. Press the TUNER MEMORY button again. • Press the TUNER MEMORY button before NUMBER disappears from the display on its own. • After you press the TUNER MEMORY button, NUMBER disappears from the display and the station is stored in memory. 4. 5. To preset another station, repeat steps 2 to 4. • To tune to a preset station, press the 5 button to select Preset and then press the TUNING/CH (,.) button to select the preset station. English HT-F9730W_ZC_0805.indd 41 41 | 2013-08-06 오후 1:09:38 Media Play SFE Mode 4. Symphony Hall in Boston (Hall 1) Philharmonic Hall in Bratislava (Hall 2) Jazz Club in Seoul B Church in Seoul Amphitheater (Rock) Off • Symphony Hall in Boston (Hall 1) : Provides a clear vocal as if listening in a concert hall. • Philharmonic Hall in Bratislava (Hall 2) : Also provides a clear vocal as if listening in a concert hall, but less powerful than HALL1. • Jazz Club in Seoul B : Recommended setting for Jazz. • Church in Seoul : Gives the feel of being in a grand church. • Amphitheater (Rock) : Recommended setting for Rock. • Off : Select for normal listening. Press the TV SOUND button again to turn TV SOUND off. • When TV SOUND is off, TV audio outputs through the speakers of the connected Anynet+ TV. Use TV SOUND: 1) When you want to listen to the TV's audio through the home theater speakers. 2) When you want to listen to the audio from a USB device plugged into the TV through the home theater speakers. TV SOUND ON/OFF support specifications: Connected TV 3D Sound Anynet+ (HDMI-CEC) supported TV You can enjoy more natural and vivid surround sound with enriched tones by adjusting the depth of sound using the level options. Off High Low Anynet+ (HDMI-CEC) not supported TV Anynet+ (HDMI-CEC) Setting TV Sound ON TV Sound OFF ON O O OFF O X No operation O X | NOTES | 3D Sound is not available in FM mode. TV SOUND TV Sound If you have a TV that supports Anynet+ (HDMI-CEC), the TV SOUND button lets you direct the TV's audio to the Home Theater Speakers or the TV Speakers. To use, follow these steps: 1. Connect an HDMI cable to the TV and home theater. (See page 18.) 2. Set Anynet+ (HDMI-CEC) On in the home theater and TV. 3. Press the TV SOUND button on the remote control. TV SOUND ON flashes on the display on the front panel, and then changes to D. IN. • When TV SOUND is on, TV audio outputs through the Home Theater speakers. | 42 English HT-F9730W_ZC_0805.indd 42 2013-08-06 오후 1:09:39 Network Services You can enjoy various network services such as streaming video or on-line apps by connecting the product to your network. Connect the product to the network. (See page 19) 2. Configure the network settings. (See pages 25~27) Logging In to Your Samsung Account Before you access Movies & TV Shows or Apps, we suggest you log in to your Samsung account. To log in to your Samsung account, follow these steps: 1. With the Home screen displayed, press the RED (A) button. The Log In screen appears. 2. Select the Email field, and then press the E button. The keyboard pop-up appears. 3. Using the keyboard, enter your e-mail address. When finished, select the Done button, and then press the E button. The Log In screen re-appears. 4. 5. Before Using Movies & TV Shows or Apps If you haven’t set up Smart Hub, when you use Movies & TV Show or Apps for the first time, the product will ask you to perform the Smart Hub set up procedure. 1. On the Home screen, select either Movies & TV Shows or Apps, and then press the E button. If you have selected Apps, go to Step 4. 2. If you selected Movies & TV Shows, the Smart Hub pop-up appears asking if you want to set up Smart Hub. Select Yes, and then press the E button. The Welcome screen appears. Select the Password field, and then press the E button. The keyboard pop-up appears. 3. Using the keyboard, enter your password. When finished, select the Done button, and then press the E button. The Log In screen re-appears. Select Start, and then press the E button. The Smart Hub Terms & Conditions, Privacy Policy screen appears. 4. On the Smart Hub Terms & Conditions, Privacy Policy screen, you must review and agree to both the Smart Hub Terms and Conditions and the Privacy Policy to use Smart Hub. 5. Scroll down, and then click the View Details buttons to review the full documents. 6. When done reading, scroll up to the first entry field, and press the E button to agree to the Terms and Conditions and consent to the Privacy Policy. 7. Press the ► button twice to go to the Supplemental Privacy Notices screen. 8. Click the View Details button to view the entire notice. 9. When done reading, scroll up to the top entry field, and then press the E button. 6. To make the log in process easier next time, select Sign me in automatically, and then press the E button. 7. Select Log In, and then press the E button. The product logs you in to your account. Your account e-mail is displayed on the bottom left of the screen. | NOTES | If you selected Sign me in automatically, the next time you log in, the product will automatically enter your e-mail and password. All you need to do is select Log In. If your e-mail address and password are not displayed when the Log In screen appears, select the button with the down pointing arrow head next to the Email field, and then press the E button. A drop down list of all your registered accounts will appear. Select your account, and then press the E button. The product will fill in the e-mail and password fields. | NOTES | You do not need to consent to the Supplemental Privacy Notice, but one or more Smart TV features or functionalities may not be available if you do not. 10. Press the ► button twice. The Setup Complete screen appears. Press the E button. English HT-F9730W_ZC_0805.indd 43 Network Services 1. in, the My Account pop-up appears. On the pop-up, you can select Logout, Change Account Information, Link Service Accounts, Remove Accounts from the Device, and Deactivate Account. To rent movies and purchase for pay apps,you must have a credit card registered in your account. If you haven’t registered a card, select Change Account Information. On the Change Account information page, select Register Card, press the E button, and then follow the directions on the screen. 06 To use network services, you must first: If you press the RED (A) button after you have logged 43 | 2013-08-06 오후 1:09:40 Network Services If you don't have a credit card associated with your Using Movies & TV Shows You can download or stream for pay and free-of-charge movies and TV shows and view them on your TV. Samsung account, after you log in, the Register Card screen will appear. Follow the directions on the screen. You must have a credit card registered to your account to rent movies and to purchase for-pay apps. Movies & TV Shows Featured Using Apps Recommended You can access and download various for-pay and freeof-charge applications from the Internet and view them on your TV. To access some applications, you need to have a Samsung account. The Apps Screen at a Glance Favourites Featured Movies TV Shows 1 Purchased 2 Apps 1. On the Home screen, select Movies & TV Shows, and then press the E button. 2. Select one of the Featured or Recommended movies, and then press the E button. The page for that movie appears. OR Recommended 1 2 3 4 5 Samsung TV My Apps Web Browser Apps Apps Use the ▼ button to go to the bottom of the screen. Select Favorites, Featured, Movies, TV Shows, or Purchased, and then press the E button. On the page that appears, use the ▲▼◄► buttons to select a show or movie, and then press the E button. On the TV Shows or Movies screen, you can also select What’s New, Most Popular, or Genres to see more available shows or movies. On the Genre screen, use the ▲▼◄► buttons to select a Genre, and then press the E button. More Apps 3 1 Recommended : Displays recommended contents managed by Samsung. Gives you access to various for pay or free-ofcharge applications you can download. 2 Featured Applications : Use the ▲▼◄► buttons to highlight the displayed Feature Application, and then press the E button. Information about the featured application appears. 3 My Apps : Displays your personal gallery of applications modifiable on the More Apps screen. 4 More Apps : Select More Apps to access the More Apps screen where you can add to, modify, and delete applications and see all downloaded applications. To make a selection on a page displaying TV shows or movies, use the ▲▼◄► buttons to make a selection, and then press the E button. 3. To watch a selection, select Watch now, and then press the E button. A selection screen appears listing various locations from which you can rent the film along with prices. 4. Select a location, and then press the E button. Follow the directions on the screen to start the movie. | NOTES | If you haven't logged into your Samsung account, the Log in screen will appear after Step 3 and you will need to log in. 4 | 44 English HT-F9730W_ZC_0805.indd 44 2013-08-06 오후 1:09:41 1. Select Apps on the Home screen, and then press the E button. 1. On the Apps screen, select Samsung Apps, and then press the E button. The Samsung Apps screen appears. 2. On the Apps screen, use the ▲▼◄►buttons to select an app, and then press the E button. The app starts. 2. Across the top of the screen, under What’s New, you'll see a series of new apps. Use the ◄► buttons to scroll the list right or left, and then select an app. Press the E button to see more information about the app. If the app is free, select Download, and then press the E button to download the app. If it is a for-pay app select Buy, press the E button, and then follow the instructions on the screen. Using the More Apps Screen More Apps View : Date Downloaded Network Services Starting an Application You can download for pay or free-of-charge applications through Samsung Apps. 06 Downloading Applications Options 1 /23 WebBrowser | NOTES | Samsung Apps To buy an app, you must be logged into your Samsung account and have a credit card registered to the account. Press the RED (A) button on your remote to log in. If you haven’t registered a card, after you log in, press the RED (A) button again, and then select Change Account Information in the pop-up that appears. On the Change Account information page, select Register Card, press the E button, and then follow the directions on the screen. You can also access and download apps from the categories listed on the left of the screen. For instructions, see Step 4. 3. After the app has downloaded, select Run, and then press the E button to run the app now. To run the app later, press the RETURN button. In either case, the icon for the app will appear on the Apps screen. 4. To see additional apps, use the ▲▼◄► buttons to move to the category list on the left side of the screen. WebBrowser Storage Category : XXXXX | Version : X.XXX | Size : XX.XKB 109.48 MB / 629.43 MB The More Apps Screen lists all the apps you have downloaded and lets you: • Sort the apps on the More Apps screen by Date Downloaded, Recently Opened, and Title. • Apply a number of Options Menu functions to the apps listed in the My Apps section of the Apps screen including updating apps, moving apps into a folder, deleting the apps from My Apps, and locking the apps. • Start apps. Sorting the Apps To sort the apps on the More Apps screen, follow these steps: 1. On the Home screen, select Apps, and then press the E button. 5. Use the ▲▼ buttons to select a category. Each time you move the highlight to another category, a different set of applications appears on the right. 2. On the Apps screen, use the ▼ button to move to the More Apps hotspot at the bottom of the page, and then press the E button. 6. Use the ► button to move to the applications and the ▲▼◄► buttons to move from app to app. 3. 7. To see more information about an app, select it, and then press the E button. On the More Apps screen, use the ▲► buttons to move to View at the top of the screen, and then press the E button. 4. 8. To download the app, follow the directions in Steps 2 and 3. In the drop down that appears, select Date Downloaded, Recently Opened, or Title, and then press the E button. The apps on the More Apps screen are sorted by the criteria you have chosen. English HT-F9730W_ZC_0805.indd 45 45 | 2013-08-06 오후 1:09:47 Network Services Using the Options Menu Functions Delete an App from My Apps 1. On the More Apps screen, use the ▲► buttons to go to Options at the top of the screen, and then press the E button. 2. Select Edit My Apps, and then press the E button. The Edit My Apps screen appears. 3. Select the app you want to delete from My Apps, press the E button, and then press the ▲▼◄► buttons in the direction of the . The Remove from My Apps pop-up appears. 4. Select Yes, and then press the E button. 5. When you return to the Apps screen, the app will have been removed from the My Apps area. Lock / Unlock Using the Lock / Unlock function and the Security PIN, you can lock applications so they cannot be started on either the Apps screen or the More Apps screen. The default PIN is 0000. 1. On the More Apps screen, use the ▲► buttons to go to Options at the top of the screen, and then press the E button. 2. Select Lock / Unlock, and then press the E button. 3. When the Lock Service appears, enter the PIN using the number buttons on your remote control. 4. To lock an application, select the application, and then press the E button. A lock appears on the app. Repeat to lock other, individual apps. 5. To unlock a locked app, select the application, and then press the E button. 6. To lock all the apps at once, use the ▲► buttons to select the Lock All button, and then press the E button. 7. To unlock all the locked apps at once, use the ▲► buttons to select the Unlock All button and then press the E button. 8. Press the RETURN button twice to return to the Apps screen. Locked apps will display a lock on the upper right side. Move an App in My Apps 1. On the More Apps screen, use the ▲► buttons to go to Options at the top of the screen, and then press the E button. 2. Select Edit My Apps, and then press the E button. The Edit My Apps screen appears. 3. Select the app you want to move in My Apps, press the E button, and then press the ▲▼◄► buttons to move the app icon in the direction of one of the arrows (<, >, ^, etc.) that appears around the app icon. The app icon moves in the direction you have chosen. 4. After you have placed the app icon where you want, press the E button. 5. When you return to the Apps screen, the app will be positioned in the location you had selected. Edit My Apps Edit My Apps lets you add apps to and delete apps from My Apps. It also lets you change the position of an app in My Apps. Add an App to My Apps 1. On the More Apps screen, use the ▲► buttons to go to Options at the top of the screen, and then press the E button. 2. Select Edit My Apps, and then press the E button. The Edit My Apps screen appears. 3. Select a full color app from the top row of apps, and then press the E button. The full color app icon appears in the My Apps area below and the app icon in the top row is grayed out. | NOTES | Create Folder Create Folder lets you create a folder on the More Apps screen into which you can put apps. 1. On the More Apps screen, use the ▲► buttons to go to Options at the top of the screen, and then press the E button. 2. Select Create Folder, and then press the E button. The Set Folder Name pop-up appears. 3. Press the E button. The keyboard appears. 4. Select the Clear button on the right side, and then press the E button to remove Folder 1 from the entry field. Then, using the keyboard, enter the name you want to apply to the folder. 5. When finished, select the Done button on the right side, and then press the E button. The pop-up reappears. 6. Select OK, and then press the E button. The new folder appears in the list of apps on the left side of the screen. Grayed out apps are already in My Apps. 4. When you return to the Apps screen, the app will appear in the My Apps area. | 46 English HT-F9730W_ZC_0805.indd 46 2013-08-06 오후 1:09:52 6. Select OK, and then press the E button. The folder is renamed. Move to Folder lets you move apps to the folder of your choice. 7. Select Close on the right side of the screen, and then press the E button. On the More Apps screen, use the ▲► buttons to go to Options at the top of the screen, and then press the E button. 2. Select Move to Folder, and then press the E button. The Move to Folder screen appears. 3. Use the ▲▼◄► buttons to move to an app, and then press the E button to select the app. A check appears in the upper left corner of the app. 4. To deselect an app, press the E button. The check disappears. 5. Repeat Step 3 to select additional apps. Delete Delete lets you delete apps and folders from the My Apps screen. If there are apps in a folder, both the folder and the apps are deleted together. Delete removes apps permanently. If you decide you want to use an app you deleted, you will need to download it again. 1. On the More Apps screen, use the ▲► buttons to go to Options at the top of the screen, and then press the E button. 2. Select Delete, and then press the E button. The Delete screen appears. To select all the downloaded apps, select Select All 3. at the top right of the screen, and then press the E button. To deselect all the apps, select Deselect All at the top right of the screen, and then press the E button. 6. When done, select Select folder at the top of the screen, and then press the E button. The Select folder pop-up appears. Use the ▲▼◄► buttons to move to an app, or folder and then press the E button to select. A check appears in the upper left corner of the app or folder you selected. 4. To deselect an app, press the E button. The check disappears. 5. Repeat Step 3 to select additional apps or folders. | NOTES | 7. In the Select folder pop-up, use the ▲▼ buttons to select the folder you want to move the apps you selected to, and then press the E button. 8. The Apps Moved pop up appears. Press the E button. 9. To open the folder, use the ▲▼◄► buttons to highlight the folder, and then press the E button. Rename Folder Rename Folder lets you rename an existing folder. 1. On the More Apps screen, use the ▲► buttons to go to Options at the top of the screen, and then press the E button. 2. Select Rename Folder, and then press the E button. The Rename Folder screen appears, and a folder is highlighted. 3. User the ▲▼◄► buttons to highlight a folder of your choice, and then press the E button. The Rename pop-up appears. 4. Press the E button. The keyboard appears. 5. Enter the new name for the folder. When finished, select Done on the right side, and then press the E button. The Rename popup reappears displaying the new name. | NOTES | To select all the downloaded apps, select Select All at the top right of the screen, and then press the E button. To deselect all the apps, select Deselect All at the top right of the screen, and then press the E button. 6. After you have made all your selections, select Delete at the top of the screen, and then press the E button. The deleting pop-up appears. 7. Select Yes, and then press the E button. All the apps you selected are deleted. | NOTES | You cannot immediately delete a locked app or folder. If you select a locked app or folder to delete, when you perform Step 7, the Lock Service pop-up appears. Enter the Security PIN into the pop-up, and then press the E button. The lock will be released and the app or folder will be deleted. English HT-F9730W_ZC_0805.indd 47 Network Services 1. 06 Move to Folder 47 | 2013-08-06 오후 1:09:53 Network Services Update Apps When the application require to update to the latest version, select Apps and then select More Apps. On the More Apps screen, select Update Apps, and then select application from the list. The application starts updating to the latest version. However, Update Apps appears on the screen only when the update is required. Screen Mirroring The Screen Mirroring function lets you view the screen of your smart phone or smart device on the TV you have connected to the home theater system. 1. Using the Web Browser You can access the Internet using the Web Browser application. Select Web Browser on the Home screen, and then press the E button. | NOTES | When you run the Web Browser with the product connected by HDMI to a BD Wise compatible TV and BD Wise is on - the browser is maximized to fill the screen and the TV's resolution is set to the optimal resolution automatically. The Web Browser is not compatible with Java applications. If you attempt to download a file, and the file cannot be saved, an error message will appear. E-commerce (purchasing products online) is not supported. ActiveX is not supported. Access may be blocked to some websites or to web browsers operated by certain businesses. With the Blu-ray's Home screen displayed, press the BLUE (D) button on the remote. The Screen Mirroring screen appears. 2. Launch AllShare Cast on your device. 3. On your device, find the name of the home theater system in the list of available devices and then select it. The TV displays a connecting message (for example, Connecting to Android_92gb...) and then displays the connected message. Link Browsing and Pointer Browsing 4. 5. In a few moments, the screen of your device appears on the TV screen. | NOTES | When you are using the Screen Mirroring function, video stuttering or audio dropouts may occur, depending on your environment. The Home Theater can connect to devices that support AllShare Cast. Note that all devices that have AllShare Cast may not be fully supported, depending on the manufacturer. For further information on mobile connection support, refer to the manufacturer’s web site. Bluetooth transmissions can interfere with the Screen Mirroring signal. Before using the Screen Mirroring function, we strongly recommend that you turn off the Bluetooth function on your smart phone or smart device. The Web Browser provides two types of browsing, Pointer Browsing and Link Browsing. When you launch the browser for the first time, Pointer Browsing is active. If you are using a mouse to navigate in the Web Browser, we recommend leaving Pointer Browsing active. If you are using your remote to navigate in the Web Browser, we recommend that you replace Pointer Browsing with Link Browsing. Link Browsing moves a highlight from one link to the next in the Web Browser and is much faster than Pointer Browsing if you are using your remote. To activate Link Browsing, follow these steps: 1. Use the ▲▼◄► buttons on your remote to move the pointer to the Link Browser icon on the top right of the screen. The Link Browser icon is the third icon from the right. The pointer will be in the correct position if the icon turns blue and the words “Link Browsing” appear on the screen. 2. Press the E button. Link Browsing is activated and will remain active whenever you bring up the Web Browser. | 48 English HT-F9730W_ZC_0805.indd 48 2013-08-06 오후 1:09:54 When you click the http://www.samsung.com , the or access a data or text entry field, and then press the E button, the keyboard pop-up appears. http://www.samsung.com 100% 1 http://www.samsung.com 100% Network Services Using the Keyboard Pop-up The Control Panel, which runs across the top of the screen, has a series of icons which start a number of useful functions. The icons are described below, starting with the icon on the far left of the screen. 06 The Control Panel at a Glance As you enter characters, recommended text will be shown. Caps 123#& 1 2 3 4 5 6 7 8 9 0 q w e r t y u i o p ^ * a s d f g h j k l ~ @ ! Done z x c v b n m , Cancel ENG www. .com Clear . ? - / 4 To use the keyboard pop-up with your remote, follow these steps: • • • • • • 1 • • • • • • • : Moves to the previous page. : Moves to the next web page. : Displays the Bookmarks and History screen. You can bookmark the current page, select an existing bookmark, and edit and delete bookmarks. You can also view your browsing history and select a page to revisit. : Moves to the Home screen of the Web Browser. http://www.samsung.com : Lets you enter a page address manually using the keyboard pop-up. : Reloads the current page so that it is refreshed on the screen. : Adds the current page to your bookmarks. : Lets you search for information by entering words or characters using the keyboard pop-up. See Using the Keyboard Popup on this page. 100% : Lets you enlarge or shrink the screen by various percentages. : Turns on the PIP function. : Lets you switch between Pointer Browsing and Link Browsing. : Lets you configure the Browser’s settings. See Using the Setting Menu on page 50. : Closes the Web Browser. 1. Use the ▲▼◄► buttons on your remote to move the highlight to a letter or number of your choice. 2. Press the E button to enter the letter or number into the entry field. 3. To access capital letters, move the highlight to the Caps key on the top left, and then press the E button. Press the E button again with the Caps key highlighted to access small letters again. 4. To access symbols and additional punctuation marks, highlight the 123#& button on the left, and then press the E button. 5. To delete a character you entered, move the highlight to the button, and then press the E button. 6. To delete all the characters you entered, move the highlight to the Clear button, and then press the E button. 7. When finished entering, move the highlight to the Done button, and then press the E button. | NOTES | If you have a wireless keyboard connected to your product, you can use the wireless keyboard to enter letters, numbers, symbols, and punctuation. Note that the wireless keyboard will work only when the keyboard popup appears and can only be used to enter letters, numbers, symbols, and punctuation. English HT-F9730W_ZC_0805.indd 49 49 | 2013-08-06 오후 1:09:55 Network Services Options on the Keyboard Pop-Up Approved Sites Lets you restrict your children’s access to inappropriate web pages by allowing access only to the web sites you have registered. Every time you access Approved Sites, the PIN screen appears. The first time you access Approved Sites, enter the default PIN, 0000 using the number buttons on your remote. You can change the PIN using the Reset password for the Approved Sites function. See below. Approved Sites feature : Turns the Approved Sites function on or off. Reset password for Approved Sites : Change the Approved Sites password. Add current site : Lets you add the currently displayed web site to the Approved Sites list. Manage Approved Sites : Lets you key in URLs to add to the Approved Sites List and delete sites from the Approved Sites list. If you turn Approved Sites on and have not added any sites to the Approved Sites list, you will not be able to access any Internet sites. Private Browsing On/off Enable or disable the Privacy mode. When the Privacy mode is enabled, the browser does not retain the URLs of sites you visit. If you want to enable Privacy mode, select OK. If the Privacy mode is running, the “Stop” icon appears in front of the URL at the top of the screen. To disable Privacy mode, select it again when Privacy mode is enabled. To access the keyboard pop-up options, highlight the button on the bottom left of the keyboard, and then press the E button. Language Select the language for the keyboard. You can select English, French, Russian, etc. Recommended Text The keyboard will suggest recommended words as you enter text. You can turn this function On or Off. Predict Next Letter The keyboard will predict the next letter as you enter letters. The predictions appear in a ring around the letter you have just entered. You can select a predicted letter or move to another letter. You can turn this function On or Off. Using the Setting Menu The Setting menu contains functions that control how the Browser operates and Browser security functions. icon in the To open the Setting menu, highlight the Control Panel, and then press the E button. To select an option in the setting menu, highlight the option, and then press the E button. http://www.samsung.com 100% Enable Grabbing Approved Sites Private Browsing On Web Browser Setting Help Close Enable/ Disable Grabbing Turns the Grabber function On and Off. When the Grabber function is on, you can move a web page up and down without dragging the scroll bar. The Grabber function is only available in Pointer Browsing. | 50 English HT-F9730W_ZC_0805.indd 50 2013-08-06 오후 1:09:57 Provides basic information about the operation of the Web Browser. | NOTES | On the Link Service Accounts screen, select the service you want to link to the product, and then press the E button. 5. Select Register, and then press the E button. 6. In the ID and Password screen, enter the ID you use to log in to the service you selected using the popup keyboard. When finished, select Done, and then press the E button. 7. Repeat the same process for the password. When finished select Done, and then press the E button. 8. Select OK, and then press the E button. BD-LIVE™ Once the product is connected to your network, you can enjoy various movie-related service contents available on BD-LIVE compliant discs. 1. Attach a USB flash drive to the USB jack on the front of the product, and then check its remaining memory. The memory device must have at least 1GB of free space to accommodate the BD-LIVE services. 2. Select Settings on the Home screen, and then press the E button. 3. Select Network, and then press the E button. 4. Select BD-Live Settings, and then press the E button. 5. Select BD Data Management, and then press the E button. 6. Select Select Device, and then press the E button. Depending on the web site, some of the Web Browser Setting functions may not be activated. Functions that are not activated are greyed out and cannot be used. Linking your Internet Service Accounts to the Product The Link Service Accounts function lets you link your product to your accounts with Internet services such as Pandora so that the product can log you in to the service automatically when you start the app for that service. To create a service account link, follow these steps: 1. On the Home screen, press the RED (A) button on your remote to log in to your Samsung Account. 2. After you have logged in, press the RED (A) button on your remote again. 3. Select Link Service Accounts in the My Account pop-up, and then press the E button. 7. Select USB device, and then press the E button. 8. Insert a Blu-ray Disc that supports BD-LIVE. 9. Select an item from the list of BD-LIVE service contents provided by the disc manufacturer. | NOTES | The way you use BD-LIVE and the provided contents may differ, depending on the disc manufacturer. English HT-F9730W_ZC_0805.indd 51 Network Services Help 4. 06 Web Browser Setting Set as homepage : You can set the Browser's home page. Pop-up Block : Turns the Popup Block on and off. Page Block : You can determine whether to block advertisements and select the URLs for which advertisements are blocked. General : You can delete personal in information such as website history and browsing data (cookies, etc.), and reset all web browser settings to their factory defaults. Encoding : You can set the Encoding setting for web pages to Automatic or select the encoding format manually from a list. Pointer : You can set the speed of the cursor when the cursor is set to Pointer and turn Smart Cursor On and Off. Browser Information : Displays the version number and copyright information for the Web Browser. 51 | 2013-08-06 오후 1:09:58 Appendix Additional Information Notes Connections HDMI OUT • Certain HDMI output resolutions may not work, depending on your TV. • You must have a HDMI connection to enjoy videos with 3D technology. • A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu. Settings 3D Settings • For some 3D discs, to stop a movie during 3D playback, press the 5 button once. The movie stops and the 3D mode option is de-activated. To change a 3D option selection when you are playing a 3D movie, press the 5 button once. The Blu-ray menu appears. Press the 5 button again, then select 3D Settings in the Blu-ray menu. • Depending on the content and the position of the picture on your TV screen, you may see vertical black bars on the left side, right side, or both sides. TV Aspect Ratio • Depending on the disc type, some aspect ratios may not be available. • If you select an aspect ratio and option which is different than the aspect ratio of your TV screen, the picture might appear to be distorted. • If you select 16:9 Original, your TV may display 4:3 Pillarbox (black bars on sides of picture). BD Wise (Samsung Products only) • When BD Wise is on, the Resolution setting automatically defaults to BD Wise and BD Wise appears in the Resolution menu. • If the product is connected to a device that does not support BD Wise, you can not use the BD Wise function. • For proper operation of BD Wise, set the BD Wise option in both the product and the TV to On. Digital Output • Be sure to select the correct Digital Output or you will hear no sound or just loud noise. • If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby Digital, DTS), the audio signal outputs as PCM. • Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects. • Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects. • This Digital Output setup does not affect the analog (L/R) audio or HDMI audio output to your TV. It affects the optical and HDMI audio output when your product is connected to an AV receiver. • If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital Output selections (PCM or Bitstream). • Digital Output can be activated when Speaker Selection is set to TV Speaker. BD-Live Internet Connection • The Internet connection may be restricted while you are using BD-LIVE contents. Anynet+ (HDMI-CEC) • Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV. • This function is not available if the HDMI cable does not support CEC. • If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function. BD Data Management • In the external memory mode, disc playback may be stopped if you disconnect the USB device in the middle of playback. • Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are supported. We recommend you use USB devices that support the USB 2.0 protocol with 4 MB/sec or faster read/ write speeds. • The Resume Play function may not work after you format the storage device. • The total memory available to BD Data Management may differ, depending on conditions. Front Display • You cannot change the brightness of the and the VOL +, - button. button | 52 English HT-F9730W_ZC_0805.indd 52 2013-08-06 오후 1:09:59 • When Speaker Selection is set to TV Speaker, audio is produced through the TV speakers. • Running the Auto Sound Calibration function takes about 3 minutes. • Make sure there is no disc in the product when you run the Auto Sound Calibration function. • If the ASC microphone is disconnected during the Auto Sound Calibration setup, the setup will be cancelled. • When the Auto Sound Calibration function is activated, the DSP, Dolby Pro Logic ll and SFE Mode will not work. • If the product is connected to external devices or other components (such as an AUX, D. IN), the Auto Sound Calibration Setup may not work properly. • Depending on the Blu-ray Disc / DVD, you may be able to change the subtitle language in the Disc Menu. Press the DISC MENU button. • This function depends on the selection of subtitles that are encoded on the disc and may not be available on all Blu-ray Discs/DVDs. • Information about the main feature BONUSVIEW mode will also appear if the Blu-ray Disc has a BONUSVIEW section. • This function changes both the primary and secondary subtitles at the same time. • The total number of primary and secondary subtitles are displayed respectively. HDMI audio • You can’t enlarge the subtitle and PG graphic in the full screen mode. • When HDMI audio is output to the TV speakers, it is automatically down-mixed to 2 channels. Playing JPEG files Media Play Audio Return Channel Dolby Pro Logic II Mode • When Anynet+ (HDMI-CEC) is Off, the Audio Return Channel function is not available. • Using an HDMI cable not certified for ARC (Audio Return Channel) may cause a compatibility problem. • The ARC function is only available if an ARCcompliant TV is connected. • Before selecting Dolby Pro Logic II mode, connect your external device to the AUDIO INPUT jacks (L and R) on the product. If you connect to only one of the inputs (L or R), you cannot listen to surround sound. Playback • If the home theater is connected to a BD Wise compliant TV that has BD Wise On, the Picture Settings menu will not appear. • The Background Music function will not work unless the music file and the photo file are located on the same storage media. Also, sound quality can be impacted by the bitrate of the MP3 music file, the size of the photos, and the encoding method. Playing Video files • Video files with high bitrates of 20Mbps or more strain the product’s capabilities and may stop playing during playback. Selecting the Audio Language Appendix Selecting the Subtitle Language 07 Speaker Settings Using the TOOLS button while playing pictures • The ◄► indicator will not appear on the screen if the BONUSVIEW section does not contain any BONUSVIEW audio settings. • The languages available through the Audio Language function depend on the languages that are encoded on the disc. This function or certain languages may not be available. • Some Blu-ray Discs may allow you to select either the PCM or Dolby Digital audio English soundtrack. English HT-F9730W_ZC_0805.indd 53 53 | 2013-08-06 오후 1:09:59 Appendix Digital Output Selections Setup PCM Connection Audio Stream on Blu-ray Disc Audio Stream on DVD Definition for Blu-ray Disc Bitstream (Unprocessed) Bitstream (Re-encoded DTS) Bitstream (Re-encoded Dolby D) HDMI supported AV receiver PCM Up to PCM 7.1ch PCM DTS re-encoded Re-encoded Dolby Digital * Dolby Digital Up to PCM 5.1ch Dolby Digital DTS re-encoded Re-encoded Dolby Digital * Dolby Digital Plus Up to PCM 7.1ch Dolby Digital Plus DTS re-encoded Re-encoded Dolby Digital * Dolby TrueHD Up to PCM 7.1ch Dolby TrueHD DTS re-encoded Re-encoded Dolby Digital * DTS Up to PCM 7.1ch DTS DTS re-encoded Re-encoded Dolby Digital * DTSHD High Resolution Audio Up to PCM 7.1ch DTS-HD High Resolution Audio DTS re-encoded Re-encoded Dolby Digital * DTS-HD Master Audio Up to PCM 7.1ch DTS-HD Master Audio DTS re-encoded Re-encoded Dolby Digital * PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch Dolby Digital Up to PCM 5.1ch Dolby Digital Dolby Digital Dolby Digital DTS Up to PCM 7.1ch DTS DTS DTS Any Decodes the main Outputs only the Decodes the main feature audio and main feature audio feature audio and Decodes the main BONUSVIEW audio stream so that your BONUSVIEW audio feature audio and stream together AV receiver can stream together BONUSVIEW audio into PCM audio and decode the audio into PCM audio and stream together adds Navigation bitstream. adds Navigation into PCM audio and Sound Effects, then You will not hear Sound Effects, then adds Navigation re-encodes the PCM BONUSVIEW audio re-encodes the Sound Effects. audio into Dolby or Navigation Sound PCM audio into DTS Digital bitstream or Effects. bitstream. PCM. If the Source Stream is 2ch or mono, “Re-encoded Dolby D” Setting are not applied. Output will be PCM 2ch. Blu-ray Discs may include three audio streams : - Main Feature Audio : The audio soundtrack of the main feature. - BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary. - Navigation Sound Effects : When you choose some menu navigation options, Navigation Sound Effects may sound. Navigation Sound Effects are different on each Blu-ray Disc. | 54 English HT-F9730W_ZC_0805.indd 54 2013-08-06 오후 1:10:00 Resolution according to the content type E-contents/ Digital contents Resolution of Blu-ray Disc 1080p@60F UHD Output : Auto 2160p@24F 2160p@24F UHD Output : Off 1080p@24F 1080p@24F Appendix BD Wise Blu-ray Disc 07 Content Type Setup Movie Frame : Auto Auto Max. Resolution of TV input Max. Resolution of TV input Movie Frame : Auto (24Fs) 1080p & 1080i only Movie Frame : Off 1080p@24F 1080p@24F 1080p 1080p@60F 1080p@60F 1080i 1080i 1080i 720p 720p 720p 480p 480p 480p Content Type Setup BD Wise DVD 480i UHD Output : Auto 2160p@24F UHD Output : Off 1080p@24F DVD 24Fs Conversion : Auto Movie Frame : Auto Auto DVD 24Fs Conversion : Off Movie Frame : Off Max. Resolution of TV input Max. Resolution of TV input Movie Frame : Auto (DVD 24Fs Conversion : Auto) 1080p & 1080i only 1080p@24F 1080p 1080p@60F 1080i 1080i 720p 720p 480p 480p | NOTES | If the TV you connected to the product does not support Movie Frame or the resolution you selected, the message "If no pictures are shown after selecting 'Yes', please wait for 15 seconds to return to the previous resolution. Do you want to change the resolution?" appears. If you select Yes, the TV's screen will go to blank for 15 seconds, and then the resolution will revert to the previous resolution automatically. If the screen stays blank after you have changed the resolution, remove all discs, and then press and hold the 5 button on the top of the product for more than 5 seconds. All settings are restored to the factory default. Run the Initial Settings procedure again. Then, go to Settings > Display > Resolution in the Menu, and select the correct resolution for your TV. When you run the Initial Settings procedure, re-select the language and aspect ratio (screen size and format) only. Resetting does not affect your network settings, so you should be able to skip Network Setup and Software Update. When the factory default settings are restored, all stored user BD data will be deleted. The Blu-ray Disc must have the 24 frame feature for the product to use the Movie Frame (24Fs) mode. English HT-F9730W_ZC_0805.indd 55 55 | 2013-08-06 오후 1:10:01 Appendix Troubleshooting Refer to the table below when this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG. Symptom Check/Remedy I cannot eject the disc. • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. Playback does not start. • Check the region number of the Blu-ray/DVD disc. Blu-ray/DVD disc purchased from abroad may not be playable. • CD-ROMs and DVD-ROMs cannot be played on this product. • Make sure that the rating level is correct. Playback does not start immediately when the Play/Pause button is pressed. • Are you using a deformed disc or a disc with scratches on the surface? • Wipe the disc clean. Sound is not produced. • The home theater does not play sound during fast playback, slow playback,and step motion playback. • Are the speakers connected properly? Is the speaker setup correctly customized? • Is the disc severely damaged? Sound can be heard only from a few speakers and not all 8. • • • • Dolby Digital 7.1 CH Surround Sound is not produced. • Is there "Dolby Digital 7.1 CH" mark on the disc? Dolby Digital 7.1 CH Surround Sound is produced only if the disc is recorded with 7.1 channel sound. • Is the audio language correctly set to Dolby Digital 7.1-CH in the information display? The remote control does not work. • Are you operating the remote within its operational range and within the proper angle relative to the sensor? • Are the batteries drained? • Have you selected the mode (TV/BD) functions of the remote control (TV or BD) correctly? • The disc is rotating but no picture is produced. • Picture quality is poor and the picture is shaking. • • • • Audio language and subtitles do not work. • Audio language and subtitles will not work if the disc does not contain them. On certain Blu-ray/DVD discs, sound is output from the front speakers only. Check if the speakers are connected properly. Adjust the volume. When playing audio from a CD, the radio, or a TV, the unit outputs sound to the front speakers only. Is the TV power on? Are the video cables connected properly? Is the disc dirty or damaged? A poorly manufactured disc may not be playable. | 56 English HT-F9730W_ZC_0805.indd 56 2013-08-06 오후 1:10:01 Symptom Check/Remedy • Are you using a disc that does not contain menus? The aspect ratio cannot be changed. • You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or 4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 ratio only. Refer to the Blu-ray Disc jacket and then select the appropriate function. • The product is not working. (Example: The power goes out or a strange noise is heard.) • The Product is not working normally. • Press and hold the remote control's 5 button for 5 seconds in STANDBY mode. This will reset the unit. - Using the RESET function will erase all stored settings. Do not use this function unless necessary. You have forgotten the rating level password. • With no disc in the product, press and hold the product's 5 button for longer than 5 seconds. INIT appears on the display and all settings will return to the default values. Then, press the POWER button. - Using the RESET function will erase all stored settings. Do not use this function unless necessary. Can't receive radio broadcasts. • Is the antenna connected properly? • If the antenna's input signal is weak, install an external FM antenna in an area with good reception. While listening to TV audio through the Product, no sound is heard. • If you press the OPEN/CLOSE ^ button while listening to TV audio using the D. IN or AUX functions, the Blu-ray/DVD disc functions are turned on and the TV audio is muted. "Not Available" appears on screen. • The features or action cannot be completed at this time because: 1. The Blu-ray/DVD disc's software restricts it. 2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles) 3. The feature is not available at the moment. 4. You’ve requested a title or chapter number or search time that is out of range. If the HDMI output is set to a resolution your TV cannot support (for example, 1080p), you may not see a picture on your TV. • Press and hold the 5 button on front panel for more than 5 seconds with no disc in the product. All settings will revert to the factory settings. No HDMI output. • Check the connection between the TV and the HDMI jack of the product. • Check if your TV supports 480p/720p/1080i/1080p HDMI input resolution. Abnormal HDMI output screen. • If random noise appears on the screen, it means that TV does not support HDCP (High-bandwidth Digital Content Protection). 07 The menu screen does not appear even when the menu function is selected. HT-F9730W_ZC_0805.indd 57 Appendix English 57 | 2013-08-06 오후 1:10:02 Appendix Symptom Check/Remedy AllShare function I can see folders shared through AllShare, but I cannot see the files. • AllShare only shows Video, Photo, and Music files. Other types of files are not displayed. Video is played intermittently. • Check if the network is stable. • Check if the network cable is properly connected and if the network is overloaded. • The wireless connection between the DLNA compatible device and the product is unstable. Check the connection. The AllShare connection between the product and PC is unstable. • IP addresses under the same subnetwork should be unique, otherwise IP collision can results in such a phenomenon. • Check if you have a firewall enabled. If so, disable the firewall function. BD-LIVE I cannot connect to the BD-LIVE server. • Test whether the network connection is active by using the Network Status function. • Check whether a USB memory device is connected to the product. • The memory device must have at least 1GB of free space to accommodate the BD-LIVE service. You can check the available size in BD Data Management. (See page 52) • See if the BD-LIVE Internet Connection option is set to Allow(All). • If all above fails, contact the contents provider or update to the latest firmware. When using the BD-LIVE service, an error occurs. • The USB memory device must have at least 1GB of free space to accommodate the BD-LIVE service. You can check the available size in BD Data Management. (See page 52) | NOTES | When the factory default settings are restored, all stored user BD data is deleted. | 58 English HT-F9730W_ZC_0805.indd 58 2013-08-06 오후 1:10:02 Specifications HDMI Amplifier 7.2 Ibs Dimensions 16.92 (W) x 2.16 (H) x 12.38 (D) inches Operating Temperature Range +41°F to +95°F Operating Humidity Range 10 % to 75 % Signal/noise ratio 55 dB Usable sensitivity 12 dB Total harmonic distortion 0.5 % Video 2D : 2160p, 1080p, 1080i, 720p, 480p 3D : 1080p, 720p Appendix FM Tuner 07 General Weight Audio PCM multichannel audio, Bitstream audio, PCM audio Front speaker output 165W x 2 (3) Front Top speaker output 165W x 2 (3) Center speaker output 170W (3) Surround speaker output 165W x 2 (3) Subwoofer speaker output 170W (3) Analog input : 20Hz~20kHz (±3dB) Frequency response Digital input : 20Hz~40kHz (±4dB) S/N Ratio 70dB Channel separation 60dB Input sensitivity (AUX) 500mV Speaker (7.1ch speaker system) Speaker system Impedance Frequency range Output sound Rated pressure level input Front/ Front Top Surround 3 140Hz~ 20kHz 87dB/W/M Center Subwoofer • • • • 40Hz ~ 160Hz 88dB/W/M 165W 170W Maximum input Dimensions (W x H x D) (inches) Weights (Ibs) 330W 3.5 x 51.2 x 2.7 (Stand base: 9.8 x 9.8) 16.87 340W 3.5 x 5.5 x 2.7 1.43 10.5 x 4.0 x 2.8 1.92 8.0 x 15.3 x 13.8 13.96 Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. Weight and dimensions are approximate. Design and specifications are subject to change without prior notice. For the power supply and Power Consumption, refer to the label attached to the product. SWA-6000 Weight 2.52 lbs Operating Humidity Range 10% ~ 75% Dimensions (W x H x D) 3 x 9 x 6 inches Output Operating Temperature Range +41°F to +95°F 165W x 2 CH Frequency range 20Hz~20KHz S/N Ratio 65dB English HT-F9730W_ZC_0805.indd 59 59 | 2013-08-06 오후 1:10:03 LIMITED WARRANTY TO ORIGINAL PURCHASER Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship. SECA further warrants that if this product falls to operate properly within the specified warranty period and the failure is due to improper workmanship or defective materials, SECA will repair or replace the product at its option. All warranty repairs must be performed by a SECA Authorized Service Center. (The name and address of the location nearest you can be obtained by calling toll free: 1- 800- SAMSUNG) LABOR PARTS One year (Carry- in) One year On carry-in models, transportation to and from the service center is the customer’s responsibility. The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase. It must be presented to the authorized service center at the time service is requested. EXCLUSIONS (WHAT IS NOT COVERED) This warranty does not cover damage due to accident, fire, flood and/ or other acts of God; misuse, incorrect line voltage, improper installation, improper or unauthorized repairs, commercial use or damage that occurs in shipping. Exterior and interior finish, lamps, glass are not covered under this warranty. Customer adjustments which are explained in the instruction manual are not covered under the terms of this warranty. This warranty will automatically be voided for any unit found with a missing or altered serial number. This warranty is valid only on products purchased and used in Canada. HEADQUARTERS SAMSUNG ELECTRONICS CANADA INC., CUSTOMER SERVICE 55 STANDISH COURT MISSISSAUGA, ONTARIO L5R 4B2 CANADA FABRIQUE EN CORÉE 1-800-SAMSUNG (1-800-7267864) WWW.SAMSUNG.COM/CA HT-F9730W_ZC_0805.indd 60 2013-08-06 오후 1:10:04 HEADQUARTERS Samsung Electronics Canada Inc., 55 Standish Court Misisauga, Ontario L5R 4B2 Canada TEL: 1-800-SAMSUNG (1-800-7267864) www.samsung.com/ca Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contact Center Area Web Site Area Contact Center ` North America CANADA 1-800-SAMSUNG (726-7864) U.S.A 1-800-SAMSUNG (726-7864) ` Latin America MEXICO 01-800-SAMSUNG(726-7864) ARGENTINE 0800-333-3733 URUGUAY 000-405-437-33 PARAGUAY 009-800-542-0001 0800-124-421 (Demais cidades e regiões) BRAZIL 4004-0000 (Capitais e grandes centros) 800-SAMSUNG (726-7864) CHILE From mobile 02-24 82 82 00 BOLIVIA 800-10-7260 01-8000 112 112 COLOMBIA Bogotá: 600 12 72 COSTA RICA 0-800-507-7267 DOMINICA 1-800-751-2676 HT-F9730W_ZC_0805.indd 61 www.samsung.com/ca (English) www.samsung.com/ ca_fr (French) www.samsung.com/us ECUADOR 1-800-10-7267 EL SALVADOR 800-6225 www.samsung.com www.samsung.com.ar www.samsung.com www.samsung.com.py GUATEMALA 1-800-299-0013 www.samsung.com.br HONDURAS 800-27919267 JAMAICA 1-800-234-7267 NICARAGUA 001-800-5077267 PANAMA 800-7267 www.samsung.com/cl www.samsung.com www.samsung.com/co www.samsung.com/ latin (Spanish) www.samsung.com/ latin_en (English) www.samsung.com/ latin (Spanish) www.samsung.com/ latin_en (English) 0-800-777-08 (Only from landline) 336-8686 (From HHP & landline) PUERTO RICO 1-800-682-3180 TRINIDAD & 1-800-SAMSUNG (726-7864) TOBAGO VENEZUELA 0-800-100-5303 PERU Web Site www.samsung.com/ latin (Spanish) www.samsung.com/ latin_en (English) www.samsung.com/ latin (Spanish) www.samsung.com/ latin_en (English) www.samsung.com/ latin (Spanish) www.samsung.com/ latin_en (English) www.samsung.com/ latin (Spanish) www.samsung.com/ latin_en (English) www.samsung.com www.samsung.com/ latin (Spanish) www.samsung.com/ latin_en (English) www.samsung.com/ latin (Spanish) www.samsung.com/ latin_en (English) www.samsung.com/pe www.samsung.com www.samsung.com www.samsung.com/ve 2013-08-06 오후 1:10:04 HT-F9730W Technoloisir Blu-ray™ 7,1 canaux Guide d’utilisation imaginez les possibilités Merci d'avoir acheté ce produit Samsung. Pour obtenir notre service complet, veuillez enregistrer votre produit sur www.samsung.com/register HT-F9730W_ZC_FRC-0814.indd 1 2013-08-14 오후 1:10:34 Information relative à la sécurité Avertissement POUR RÉDUIRE LES RISQUES D’ÉLECTROCUTION, NE RETIREZ JAMAIS LE CAPOT (NI L’ARRIÈRE). LES PIÈCES DE CE PRODUIT NE SONT PAS RÉPARABLES PAR L’UTILISATEUR. VEUILLEZ CONTACTER UN TECHNICIEN QUALIFIÉ POUR TOUTE RÉPARATION. ATTENTION RISQUE DE CHOC ÉLECTRIQUE NE PAS OUVRIR. L’éclair et la flèche inclus dans le triangle représentent un avertissement à l’égard de tensions dangereuses se trouvant à l’intérieur du produit. ATTENTION: POUR RÉDUIRE LES RISQUES D’ÉLECTROCUTION, NE RETIREZ JAMAIS LE CAPOT (NI L’ARRIÈRE). LES PIÈCES DE CE PRODUIT NE SONT PAS RÉPARABLES PAR L’UTILISATEUR. VEUILLEZ CONTACTER UN TECHNICIEN QUALIFIÉ POUR TOUTE RÉPARATION. AVERTISSEMENT • Afin de réduire tout risque d’incendie ou d’électrocution, n’exposez jamais cet appareil à la pluie ou à l’humidité. Note à l’installateur du système de câblodistribution Le présent rappel a pour but d’inviter l'installateur du système de câblodistribution à consulter la section 820~40 du Code national du bâtiment (NEC) qui renferme des directives sur la mise à la terre et qui stipule que la mise à la terre du câble doit être reliée au système de mise à la terre du bâtiment, et ce, le plus près possible du point d'entrée du câble dans le bâtiment. Produit LASER DE CLASSE 1 Cet appareil est homologué comme produit LASER DE CLASSE 1. L'utilisation des commandes, les réglages ou l'exécution de procédures autres que celles spécifiées ci-dessus peuvent conduire à une exposition à des radiations dangereuses. DANGER : • PEUT ÉMETTRE UN RAYONNEMENT LASER VISIBLE OU INVISIBLE SI LE COUVERCLE EST OUVERT. ÉVITEZ UNE EXPOSITION DIRECTE AUX RAYONS. (FDA 21 CFR) Un triangle contenant un point d’exclamation signifie un avertissement vous demandant de consulter les instructions importantes qui accompagnent le produit. ATTENTION : • PEUT ÉMETTRE UN RAYONNEMENT LASER VISIBLE OU INVISIBLE DE CLASSE B SI LE COUVERCLE EST OUVERT. ÉVITEZ UNE EXPOSITION AUX RAYONS (IEC 60825-1) • CET APPAREIL UTILISE UN LASER. EFFECTUER DES CONTROLES OU DES REGLAGES OU BIEN EXECUTER DES PROCEDURES AUTRES QUE CELLES SPECIFIEES DANS CE MANUEL PEUT PROVOQUER UNE EXPOSITION A UN RAYONNEMENT DANGEREUX. N'OUVREZ PAS LE CAPOT ET N'EFFECTUEZ PAS DE REPARATION VOUS-MEME. VEUILLEZ CONTACTER UN TECHNICIEN QUALIFIÉ POUR TOUTE RÉPARATION. CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1 PRODUCTO LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT LÁSER CLASE 1 NOTES FCC Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. | 2 Français HT-F9730W_ZC_FRC-0814.indd 2 2013-08-14 오후 1:11:04 Précautions 1. Lisez ces instructions. 2. Conservez ces instructions. 3. Tenez compte de tous les avertissements. 4. Suivez toutes les instructions. 5. N’utilisez jamais cet appareil à proximité de l’eau. 6. Nettoyez l'appareil uniquement avec un linge sec. 7. N'obstruez aucun orifice de ventilation. Installez l'appareil en respectant les consignes du fabricant. 8. Ne l’installez jamais à proximité de sources de chaleur telles que les radiateurs, les registres de chaleur, les poêles ou autres appareils (y compris les récepteurs A/V) qui dégagent de la chaleur. 9. Ne démontez pas le dispositif de sécurité de la fiche polarisée ou de mise à la terre. Les fiches polarisées sont pourvues de deux lames, dont l’une est plus large que l’autre. Les fiches de mise à la terre sont pourvues de deux lames et d’une broche de mise à la terre. La broche large ou la troisième broche garantissent votre sécurité. Si la fiche fournie ne peut pas rentrer dans votre prise, demandez à un électricien de remplacer cette prise, car elle est obsolète. 10. Protégez le cordon contre le piétinement ou les pincements, en particulier près des fiches, des prises murales et à son point de sortie de l’appareil. 11. Utilisez uniquement les accessoires recommandés par le fabricant. 12. Utilisez uniquement le chariot, le socle, le trépied, le support ou la table recommandés par le fabricant ou vendus avec l’appareil. Si l’équipement est placé sur un meuble à roulettes, déplacez ce meuble avec précaution, afin d’éviter les blessures que pourrait entraîner le basculement de l’appareil. 13. Débranchez cet appareil en cas d'orage ou si vous ne l’utilisez pas pendant une période prolongée. 14. Confiez toute réparation à du personnel qualifié. Une réparation est nécessaire si l’appareil a été endommagé d’une façon ou d’une autre : cordon d’alimentation ou fiche endommagée, projection de liquide ou chute d’objets sur l’appareil, exposition à la pluie ou à l’humidité, fonctionnement anormal, chute de l’appareil. Précautions de manipulation • N’exposez pas cet appareil aux égouttements ou aux éclaboussures. Ne placez pas d'objet contenant des liquides, comme des vases, sur l’appareil. • Pour éteindre complètement cet appareil, vous devez le débrancher de la prise murale. Par conséquent, cette prise de courant doit être facilement et rapidement accessible en tous temps. • Ne touchez pas la fiche d’alimentation électrique avec les mains mouillées, car cela pourrait entraîner un choc électrique. • Ne branchez pas plusieurs appareils électriques dans la même prise murale. La surcharge d’une prise peut causer une surchauffe qui pourrait entraîner un feu. • Avant de connecter d'autre composants à ce produit, veillez à les éteindre. • Si vous déplacez sans transition votre produit d’un endroit froid vers un endroit chaud, de la condensation pourrait se former sur les pièces mobiles et sur les lentilles et provoquer une lecture anormale. Si cela se produit, débranchez le produit et attendez deux heures avant de le brancher dans la prise murale. Ensuite, insérez le disque et tentez une nouvelle lecture. Français HT-F9730W_ZC_FRC-0814.indd 3 Information relative à la sécurité Lisez attentivement ces instructions d'utilisation avant d'utiliser l'appareil. Suivez toutes les consignes de sécurité ci-dessous. Conservez ces instructions d’utilisation à portée de la main pour consultation future. • Manipulation des disques - Les traces de doigts ou les éraflures sur un disque peuvent nuire à la qualité du son et de l’image ou causer des sauts. - Évitez de toucher la surface d’un disque sur laquelle des données ont été enregistrées. - Tenez le disque par les bords pour éviter les traces de doigts sur la surface. - Ne collez pas de papier ou de ruban sur le disque. • Nettoyage des disques - Enlevez les traces de doigts ou la saleté qui s’est déposée sur le disque avec un chiffon doux humecté de détergent doux dilué dans de l’eau. - Lorsque vous nettoyez le disque, essuyez-le délicatement de l’intérieur vers l’extérieur. - Rangement des disques Ne les laissez pas sous la lumière directe du soleil. Gardez-les dans un endroit frais et ventilé. Laissez-les dans une pochette de protection propre et rangez-les verticalement. 01 Consignes de sécurité importantes Rangement et gestion des disques 3| 2013-08-14 오후 1:11:04 Information relative à la sécurité • Si vous percevez un bruit anormal ou une odeur de brûlé ou si vous apercevez de la fumée, éteignez immédiatement le produit et débranchez la fiche d’alimentation électrique de la prise murale. Ensuite, communiquez avec le centre de service à la clientèle le plus proche pour obtenir de l’assistance technique. N’utilisez pas le produit. L’utilisation du produit pourrait entraîner un feu ou un choc électrique. Licence Fabriqué sous licence concédée par Dolby Laboratories. Dolby, Pro Logic et le symbole du double-D sont des marques de commerce de Dolby Laboratories. Fabriqué sous licence et sous les numéros de brevets américains suivants : 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 et 7,548,853. DTS, DTS-HD, le symbole, et DTS ou DTS-HD et le symbole ensemble sont des marques enregistrées et DTS Neo:Fusion est une marque de commerce de DTS, Inc. ©2012 DTS, Inc. Tous droits réservés. Les termes HDMI, HighDefinition Multimedia Interface et le logo HDMI sont des marques de commerce ou des marques déposées de HDMI Licensing LLC aux États-Unis ou dans d'autres pays. DLNA®, le logo DLNA et DLNA CERTIFIED® sont des marques de commerce, des marques de service ou des marques de certification de Digital Living Network Alliance. Ce produit est pourvu de la technologie de protection contre la copie. Cette technologie est protégée par des brevets américains et par d’autres droits de propriété intellectuelle appartenant à Rovi Corporation. Tout désossage ou désassemblage est interdit. Blu-ray Disc™, Blu-ray™ et les logos sont des marques de commerce de Blu-ray Disc Association. Ce produit utilise la technologie Cinavia pour limiter l’utilisation de copies non autorisées de certains films et de certaines vidéos commercialisés et de leurs bandes sonores. Si l’utilisation interdite d’une copie non autorisée est détectée, un message s’affiche et la lecture ou la copie s’interrompt. De plus amples renseignements sur la technologie Cinavia sont fournis au Centre d’information en ligne Cinavia à l’adresse http://www.cinavia.com. Pour demander de l’information supplémentaire sur Cinavia par courrier postal, envoyez une carte comportant votre adresse à : Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA. Ce produit comprend la technologie exclusive accordée sous licence par Verance Corporation et protégée par le brevet américain 7 369 677 et par d’autres brevets américains et étrangers, émis ou en instance; certains aspects de cette technologie sont aussi protégés par des droits d’auteur et contre la divulgation du secret de fabrication. Cinavia est une marque de commerce de Verance Corporation. Droit d’auteur 2004-2010 Verance Corporation. Tous droits réservés par Verance. Tout désossage ou désassemblage est interdit. - Avis relatif à la licence de logiciel en code source ouvert Si vous utilisez un logiciel à code source ouvert, des licences de logiciel en code source ouvert sont proposées dans le menu du produit. Utilisation de la fonction 3D INFORMATION IMPORTANTE SUR LA SANTÉ ET LA SÉCURITÉ CONCERNANT LES FILMS EN 3D. Vous devez lire et comprendre les consignes de sécurité suivantes avant d'utiliser la fonction 3D. • Lorsqu'ils regardent la télévision 3D, certains spectateurs pourraient ressentir certains troubles, tels que des vertiges, des nausées ou des maux de tête. Si vous manifestez certains de ces symptômes, arrêtez de regarder la télévision 3D, retirez les lunettes 3D actives et reposez-vous. • Le fait de regarder des images 3D pendant une période prolongée peut fatiguer les yeux. Si vos yeux se fatiguent, arrêtez de regarder la télévision 3D, retirez les lunettes 3D actives et reposez-vous. • Un adulte responsable devrait surveiller régulièrement les enfants qui utilisent la fonction 3D. En cas de fatigue des yeux, de maux de tête, de vertiges ou de nausées, l'enfant doit arrêter de regarder la télévision en 3D et se reposer. • N’utilisez pas les lunettes 3D actives à d’autres fins (p. ex., comme lunettes de vue, de soleil, de protection, etc.). • N’utilisez pas la fonction 3D ou les lunettes 3D actives lorsque vous marchez ou lorsque vous vous déplacez. Si vous utilisez la fonction 3D ou des lunettes 3D actives tout en marchant ou en vous déplaçant, vous pourriez vous heurter à des objets, trébucher et/ou tomber et vous blesser gravement. | 4 Français HT-F9730W_ZC_FRC-0814.indd 4 2013-08-14 오후 1:11:05 © 2013 Samsung Electronics Co.,Ltd. Tous droits réservés. Le présent guide d’utilisation ne peut être reproduit ou copié, partiellement ou dans son intégralité, sans le consentement écrit préalable de Samsung Electronics Co., Ltd. Compatibilité du disque et du format Logos des disques que le produit peut lire Accessoires Face avant Face arrière Noyau torique en ferrite Télécommande Information relative à la sécurité Droits d’auteur POUR DÉMARRER 6 7 10 11 11 12 13 01 • Si vous souhaitez visionner du contenu 3D, connectez un appareil 3D (récepteur A/V ou téléviseur compatible 3D) au port de sortie HDMI OUT du produit à l'aide d'un câble HDMI haute vitesse. Mettez les lunettes 3D avant de visionner le contenu 3D. • Le produit émet les signaux 3D uniquement par le câble HDMI connecté au port de sortie HDMI OUT. • Comme la résolution de la vidéo en mode de lecture 3D est définie en fonction de la résolution de la vidéo 3D originale, vous ne pouvez pas choisir la résolution. • Certaines fonctions comme BD Wise ou les réglages de la taille de l'écran et de la résolution pourraient ne pas fonctionner correctement en mode de lecture 3D. • Vous devez utiliser un câble HDMI haute vitesse pour obtenir une sortie correcte du signal 3D. • Tenez-vous à une distance du téléviseur équivalente à trois fois au moins la largeur de l'écran du téléviseur lorsque vous visionnez des images 3D. Par exemple, si votre écran est de 46 po, tenez-vous à 138 po (11,5 pi/3,50 m) de l'écran. • Placez l'écran vidéo 3D à la hauteur de vos yeux pour obtenir la meilleure image 3D. • Quand le produit est connecté à certains appareils 3D, l’effet 3D pourrait ne pas fonctionner correctement. • Ce produit ne convertit pas le contenu 2D en 3D. • Les logos « Blu-ray 3D » et « Blu-ray 3D » sont des marques de commerce de Blu-ray Disc Association. CONNEXIONS 15 Connexion des enceintes 18 Branchement à des périphériques externes/un téléviseur 19 Connexion à un routeur réseau DÉFINITION DES PARAMÈTRES 20 20 20 21 25 25 28 Procédure relative aux paramètres Écran Accueil Accès à l’écran Paramètres Fonctions du menu Paramètres Calibrage automatique du son Réseaux et Internet Mise à niveau logicielle 30 30 30 31 L’écran Tout le contenu Lecture de disques commerciaux Lecture des fichiers sur un périphérique USB Lecture d’un disque contenant des données enregistrées par l’utilisateur Utilisation de la fonction réseau AllShare Commande de la lecture des vidéos Commande de la lecture de la musique Visionnement de photos Écoute de la radio Utilisation des touches d’effets spéciaux de la télécommande DIFFUSEUR DE MÉDIAS 31 32 35 40 41 41 SERVICES RÉSEAU Table des matières INFORMATION RELATIVE À LA SÉCURITÉ 2 3 3 3 4 4 5 Avertissement Précautions Rangement et gestion des disques Précautions de manipulation Licence Utilisation de la fonction 3D Droits d’auteur 43 Connexion à votre compte Samsung 43 Avant l’utilisation des options Films et programmes télévisés ou Applications 44 Utilisation de l’option Films et programmes télévisés 44 Par les applications 48 Screen Mirroring 48 Utilisation du navigateur Web 51 Appariement des comptes de services Internet au produit 51 BD-LIVE™ ANNEXE 52 Information complémentaire 56 Dépannage 59 Caractéristiques techniques Français HT-F9730W_ZC_FRC-0814.indd 5 5| 2013-08-14 오후 1:11:07 Pour démarrer Compatibilité du disque et du format Types de disque et contenus que votre produit peut lire Média Type de disque Disque Blu-ray Disque Blu-ray 3D VIDÉO Détails Le disque BD-ROM ou BD-RE/-R est enregistré dans le format BD-RE. DVD-VIDÉO, DVDRW, DVD-R, DVD+RW, DVD+R DVD-VIDÉO, disques DVD+RW/DVD-RW(V)/DVD-R/+R qui ont été enregistrés et finalisés ou périphérique USB comprenant du contenu MKV ou MP4. MUSIQUE CD-RW/-R, DVD-RW/ -R, BD-RE/-R Musique enregistrée sur un disque CD-RW/-R, DVD-RW/-R ou BD-RE/-R ou sur un périphérique USB comprenant du contenu MP3 ou WMA. PHOTOS CD-RW/-R, DVD-RW/ -R, BD-RE/-R Photos enregistrées sur un disque CD-RW/-R, DVD-RW/-R ou BD-RE/-R ou sur un périphérique USB comprenant du contenu JPEG. | REMARQUE | Le produit pourrait ne pas être en mesure de lire certains disques CD-RW/-R et DVD-R en raison du type de disque ou des conditions d’enregistrement. Si un disque DVD-RW/-R n’a pas été correctement enregistré en format DVD vidéo, il ne sera pas lisible. Votre produit ne lira pas le contenu enregistré sur un DVD-R à un débit binaire de plus de 10 Mbit/s. Votre produit ne lira pas le contenu enregistré sur un disque BD-R ou sur un périphérique USB à un débit binaire de plus de 30 Mbit/s. Il se peut que certains disques ne puissent pas être lus, notamment lorsque des fonctions spécifiques, comme le changement d’angle et le réglage du format d’image, sont activées. De l'information détaillée sur les disques figure sur l’emballage du disque. Veuillez vous y reporter au besoin. Lors de la lecture d'un titre en format BD-J, le chargement peut être plus long que celui d’un titre ordinaire ou bien certaines fonctions peuvent être ralenties. Types de disques que votre produit ne peut pas lire • DVD HD • Disques DVD-ROM/PD/ MV, etc. • DVD-RAM • Super Audio CD (sauf CD à couche) • DVD-RW (mode VR) • DVD-R d’auteur 3,9 Go. • CVD/CD-ROM/CDV/ CD-G/CD-I/LD (les disques CD-G autorisent la lecture de l'audio uniquement, pas les graphiques.) | REMARQUE | Ce produit pourrait ne pas répondre à toutes les commandes, car les disques Blu-ray, DVD et CD ne peuvent être utilisés que dans certaines limites ou conditions spécifiques et autorisent seulement l'utilisation de certaines fonctions pendant la lecture. Veuillez noter qu’il ne s’agit pas d’un défaut du produit. Samsung ne peut pas garantir que ce produit pourra lire tous les disques comportant le logo Blu-ray Disc, DVD ou CD parce que les formats de disque évoluent et des problèmes ou des erreurs peuvent se produire pendant la création des logiciels pour disques Blu-ray, DVD et CD ou pendant la fabrication des disques. Veuillez communiquer avec le Centre de soutien à la clientèle SAMSUNG en composant le 1 800 726-7864 si vous avez des questions ou si vous éprouvez des difficultés lorsque vous utilisez ce produit pour la lecture de disques Bluray Disc, DVD ou CD. De plus, reportez-vous à l’information sur les limites en matière de lecture contenue dans les pages de ce guide d’utilisation. Certains disques à usage commercial et DVD achetés hors de votre région pourraient ne pas être lus sur ce produit. | 6 Français HT-F9730W_ZC_FRC-0814.indd 6 2013-08-14 오후 1:11:08 Code de région Code de région Zone A Amérique du Nord, Amérique Centrale, Amérique du Sud, Corée, Japon, Taïwan, Hong Kong et Sud-Est asiatique. B Europe, Groenland, territoires français, Moyen-Orient, Afrique, Australie et Nouvelle Zélande. C Inde, Chine, Russie, Asie centrale et Asie méridionale. 1 États-Unis, territoires américains et Canada 2 Europe, Japon, Moyen Orient, Égypte, Afrique et Groenland. 3 Taiwan, Corée, Philippines, Indonésie et Hong Kong. 4 Mexique, Amérique du Sud, Amérique Centrale, Australie, Nouvelle Zélande, Îles du Pacifique et Caraïbes. 5 Russie, Europe de l'Est, Inde, Corée du Nord et Mongolie. 6 Chine. Disque Blu-ray Disque Blu-ray Disques Blu-ray 3D BD-LIVE Dolby Pour démarrer Type de disque Logos des disques que le produit peut lire 02 Le produit et les disques sont codés par région. Ces codes de région doivent correspondre pour que le disque puisse être lu. Si les codes ne correspondent pas, le disque ne sera pas lu. Le numéro de région attribué à ce produit figure sur la face arrière du produit. DTS DVD-VIDÉO Java Système de diffusion NTSC aux É.-U., au Canada, en Corée et au Japon | REMARQUE | Si le numéro de région d’un disque Blu-ray/DVD ne correspond pas au numéro de région de ce produit, celui-ci ne peut pas lire le disque. Français HT-F9730W_ZC_FRC-0814.indd 7 7| 2013-08-14 오후 1:11:08 Pour démarrer Formats pris en charge Fichiers vidéo pris en charge Extension de fichier Conteneur Codec vidéo Fréquence d’image (ips) Résolution Débit binaire (Mbit/s) Codec audio MPEG4 SP/ASP *.avi *.mkv *.asf *.wmv *.mp4 *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.mov *.flv *.vob *.svi *.m2ts AVI MKV ASF MP4 3GP MOV FLV VRO VOB PS TS SVAF *.webm WebM H.264 BP/ MP/HP Motion JPEG Microsoft MPEG-4 v3 Window Media Video v7, v8, v9 1920x1080 (WMV v7,v8, MSMPEG4 v3 : 1280x720) 30 6~30 MPEG2 MPEG1 4 VP6 640x480 MVC - 24/25/30 60 VP8 1920x1080 6~30 20 Restrictions - Même si un fichier est encodé au moyen d’un codec pris en charge énuméré ci-dessus, il pourrait ne pas être lu en cas d’erreur ou de corruption du contenu. - La lecture normale n’est pas garantie si l’information sur le conteneur du fichier est erronée ou si le fichier lui-même est corrompu. - La lecture des fichiers dont le débit binaire ou la fréquence d’image sont supérieurs à la normale pourrait être saccadée. - La fonction de recherche (saut) n’est pas disponible si la table d’index du fichier est endommagée. - Lorsque la lecture d’un fichier s’effectue à distance par une connexion réseau, selon la vitesse du réseau, la lecture de la vidéo peut être saccadée. - Certains périphériques USB/appareils photo numériques pourraient ne pas être compatibles avec le lecteur. Décodeur vidéo - Prend en charge jusqu’à la norme H.264 Niveau 4.1 (sauf pour FMO/ASO/RS) - Ne prend pas en charge les normes VC1 AP L4 - Sauf pour WMV v7, v8, MSMPEG4 v3, MVC, VP6 Au-dessous de 1280 x 720 : 60 images max. Au-dessus de 1280 x 720 : 30 images max. - Ne prend pas en charge GMC 2 ou supérieur Dolby numérique LPCM ADPCM (IMA, MS) AAC HE-AAC WMA Dolby numérique Plus MPEG(MP3) DTS Vorbis - Prend en charge SVAF haut/bas, côte à côte seulement - Prend en charge seulement les spécifications BD MVC Décodeur audio - Prend en charge WMA 10 Pro (jusqu’à 5,1) Ne prend pas en charge le format WMA audio sans perte. ADPCM IMA, MS pris en charge. Ne prend pas en charge ADPCM (A-Law, μ-Low) Ne prend pas en charge QCELP, AMR NB/WB Prend en charge l’algorithme vorbis (jusqu’à 2 canaux), Prend en charge Dolby numérique Plus (jusqu’à 7 canaux) Commentaires - MPEG4 : Prend en charge jusqu’au point de déformation GMC 1 - H.264 : - Prend en charge jusqu’aux BP/MP/HP Niveau 4,1. - WMV : Prend en charge les spécifications V9, VC1 SP/MP/ AP L3. - MPEG1 : Ne prend pas en charge D-picture. - MPEG2 : Prend en charge jusqu’au format High Profile High Level. | REMARQUE | Il se pourrait que certains disques de format MKV et MP4 ne puissent pas être lus en raison de leur résolution vidéo et de leur fréquence d’image. | 8 Français HT-F9730W_ZC_FRC-0814.indd 8 2013-08-14 오후 1:11:11 Fichiers de musique pris en charge Plage de compatibilité MP3 MPEG1 Audio couche 3 - *.m4a *.mpa *.aac MPEG4 AAC - *.flac FLAC FLAC Prend en charge jusqu’à 2 canaux *.ogg OGG Vorbis Prend en charge jusqu’à 2 canaux *.wma WMA WMA Prend en charge WMA 10 Pro (jusqu’à 5,1) Ne prend pas en charge le codage sans perte WMA 9, audio. Prend en charge jusqu’au profil M2 Ne prend pas en charge le mode LBR *.wav wav wav - *.mid *.midi midi midi type 0 et type 1 *.ape ape ape Does not support X13, NVT Support pour fichiers d’images Extension de fichier Type Résolution *.jpg *.jpeg JPEG 15360x8640 *.png PNG 4096x4096 *.bmp BMP 4096x4096 *.mpo MPO 15360x8640 Français HT-F9730W_ZC_FRC-0814.indd 9 Pour démarrer *.mp3 • Votre produit prend en charge les périphériques USB, les lecteurs MP3, les appareils photo numériques et les lecteurs de cartes USB. • Ce produit ne prend pas en charge les noms de dossiers ou de fichiers qui comportent plus de 128 caractères. • Certains périphériques USB/appareils photo numériques pourraient ne pas être compatibles avec ce produit. • Votre produit prend en charge les systèmes de fichiers FAT 16, FAT 32 et NTFS. • Connectez les périphériques USB directement au port USB du produit. La connexion par câble USB peut entraîner des problèmes de compatibilité. • L'insertion de plus d'un périphérique de stockage dans un lecteur multicarte pourrait empêcher le lecteur de fonctionner correctement. • Ce produit ne prend pas en charge le protocole PTP. • Ne déconnectez pas le périphérique USB pendant le processus de « chargement ». • Plus la résolution de l'image est importante, plus l'image est longue à s'afficher. • Ce produit ne peut pas lire les fichiers MP3 lorsque la GDM (gestion numérique des droits d'auteur) a été téléchargée depuis des sites commerciaux. • Votre produit ne prend en charge que la vidéo inférieure à 30 images/seconde (fréquence d'images). • Votre produit ne prend en charge que les périphériques USB à mémoire de grande capacité (MSC) tels que les clés USB et les lecteurs de disque dur USB (les concentrateurs ne sont pas pris en charge). • Certains lecteurs de disque dur USB, lecteurs multicartes et périphériques USB pourraient ne pas être compatibles avec ce produit. • Les périphériques USB qui nécessitent une puissance excessive pourraient être limités par le dispositif de sécurité du circuit. • Si la lecture d’un lecteur de disque dur USB est instable, fournissez une puissance supplémentaire en branchant le lecteur de disque dur dans une prise murale. Si le problème persiste, communiquez avec le fabricant du lecteur de disque dur USB. • SAMSUNG n’assume aucune responsabilité en matière de dommages de fichiers de données ou de pertes de données. 02 Extension Codec Conteneur de fichier audio Remarques sur la connexion USB 9| 2013-08-14 오후 1:11:11 Pour démarrer AVCHD (Codec vidéo amélioré pour la haute définition) • Ce produit peut lire les disques en format AVCHD. Ces disques sont habituellement enregistrés et utilisés dans les caméscopes. • Le format AVCHD est un format de caméra vidéo numérique à haute définition. • Le format MPEG-4 AVC/H.264 compresse les images avec une plus grande efficacité que le format de compression traditionnel. • Certains disques AVCHD utilisent le format « x.v.Color ». Ce produit peut lire les disques AVCHD de format « x.v.Color ». • « x.v.Color » est une marque de commerce de Sony Corporation. • « AVCHD » et le logo AVCHD sont des marques de commerce de Matsushita Electronic Industrial Co., Ltd. et de Sony Corporation. | REMARQUE | Il se pourrait que certains disques de format AVCHD ne puissent pas être lus en raison des conditions d'enregistrement. Les disques de format AVCHD doivent être finalisés. Le format « x.v.Color » offre une plus vaste palette de couleurs que les DVD normaux de caméscope. Il se pourrait que certains disques de format MKV et MP4 ne puissent pas être lus en raison de leur résolution vidéo et de leur fréquence d’image. Accessoires Vérifiez la présence de tous les accessoires fournis ci-dessous. FUNCTION TV SOURCE (Pour le cordon d’alimentation) RECEIVER BD TV SLEEP 1 2 4 5 7 8 3 6 9 DISC MENU TITLE MENU 0 POPUP MUTE VOL TV SOUND FULL SCREEN (Pour le câble d’enceinte) TUNING / CH REPEAT HOME TOOLS INFO EXIT RETURN Guide d’utilisation Noyau torique en ferrite Microphone ASC TUNER MEMORY A SMART PRESET Antenne FM Câble D’alimentation Chiffon doux B C MO/ST D SEARCH S/W LEVEL 3D SOUND HUB MANUAL AUDIO SUBTITLE SOUND EFFECT Télécommande/ Piles (type AAA) Les chiffres et les illustrations contenus dans ce Guide d'utilisation sont fournis à titre de référence uniquement et pourraient ne pas représenter exactement le produit. Des frais d’administration pourraient être facturés si : a. un technicien se rend à votre domicile à votre demande et détermine que le produit n'est pas défaillant (p. ex., vous n’avez pas lu le présent Guide d’utilisation) b. vous apportez l'appareil à un centre de réparation qui détermine que le produit n'est pas défaillant (p. ex., vous n’avez pas lu le présent Guide d’utilisation). Le montant de ces frais administration vous sera communiqué avant qu’un quelconque travail ne soit entrepris ou avant toute visite à domicile. | 10 Français HT-F9730W_ZC_FRC-0814.indd 10 2013-08-14 오후 1:11:12 Face avant 02 AMP. TUBE À VIDE LECTURE/PAUSE OUVRIR/FERMER FONCTION MARCHE/ ARRÊT VACUUM TUBE SO UND Pour démarrer D H-EN HIG ARRÊT TIROIR DISQUE DÉTECTEUR DE TÉLÉCOMMANDE AFFICHAGE USB 5V 0.5A COMMANDES DU VOLUME | REMARQUE | Des téléphones cellulaires ou des appareils mobiles placés près d'un amplificateur à lampe ou des produits électroniques placés sur le dessus du produit peuvent perturber le son ou causer de la distorsion. Veillez à ce que les enfants ne touchent pas à la surface du produit lorsque le téléviseur est allumé. Il sera chaud. Pour mettre à jour le logiciel du produit par la prise USB, vous devez utiliser une clé USB. Lorsque le produit affiche le menu du disque Blu-ray, vous ne pouvez pas commencer à visionner le film en appuyant sur la touche 6 du produit ou sur la touche de la télécommande. Pour lancer la lecture du film, vous devez sélectionner Lire le film ou Commencer dans le menu du disque, puis appuyer sur la touche E. Si vous utilisez le service Internet ou lisez le contenu du périphérique USB sur le téléviseur, vous ne pouvez pas sélectionner le mode BD/DVD à l’aide de la touche FUNCTION. Commencez par arrêter la lecture du contenu du téléviseur avant de sélectionner le mode BD/DVD. Face arrière * ANTENNE FM ENTRÉE ASC ENTRÉE AUX CONNECTEURS DE SORTIE DES ENCEINTES VENTILATEUR BORNE RL FM ANT L POWER OPTICAL ASC IN HDMI OUT 1 SORTIE HDMI HDMI IN R 2 DIGITAL AUDIO IN ENTRÉE HDMI SPEAKERS OUT AUX IN LAN CENTER FRONT SUBWOOFER FRONT L R FRONT TOP L FRONT TOP R IMPEDANCE : 3 ENTRÉE AUDIO NUMÉRIQUE DE PÉRIPHÉRIQUE (OPTIQUE) CORDON D’ALIMENTATION * Connexion de l’antenne FM 1. Branchez l’antenne FM fournie à la prise FM ANT. 2. Déplacez lentement le fil d’antenne jusqu’à ce que vous trouviez un endroit où la réception est bonne, puis fixez-le au mur ou à une autre surface rigide. | REMARQUE | Veillez à laisser un espace minimum de 10 cm (4 po) de chaque côté du cinéma maison pour assurer une ventilation adéquate. N’obstruez pas le ventilateur ou les orifices de ventilation. Ce produit ne reçoit pas la fréquence de diffusion AM. HT-F9730W_ZC_FRC-0814.indd 11 Français 11 | 2013-08-14 오후 1:11:17 Pour démarrer Noyau torique en ferrite Pour le cordon d’alimentation POWER <SWA-6000> <Unité principale> Si vous fixez un noyau torique en ferrite au câble d'alimentation, cela empêchera les interférences RF des signaux radioélectriques. 1. Tirez la languette de fixation du noyau torique en ferrite pour ouvrir celui-ci. 2. Faites deux boucles dans le cordon d’alimentation. 3. Fixez le noyau torique en ferrite au cordon d’alimentation tel qu’illustré sur la figure et appuyez jusqu’à ce qu’il s’encliquette. Pour le câble d’enceinte OPTICAL ASC IN DIGITAL AUDIO IN <SWA-6000> SPEAKERS OUT FM ANT CENTER FRONT SUBWOOFER FRONT L R FRONT TOP L FRONT TOP R IMPEDANCE : 3 <Unité principale> SWA-6000 Effectuez 3 tours de câbles d’enceinte qui sont branchés aux bornes ARRIÈRE G et ARRIÈRE D du récepteur sans fil (SWA-6000) et insérez le noyau de ferrite de la même façon qu'à l'étape 3 ci-dessus. Unité principale 1. Ouvrez le noyau en ferrite en tirant sur la languette. 2. Faites une boucle deux fois avec les câbles d’enceinte. 3. Fixez le noyau de ferrite aux câbles disposés et exercez une pression pour fermer jusqu’à ce que vous entendiez un clic. • Fixez le noyau en ferrite le plus près possible de l’unité principale. | 12 Français HT-F9730W_ZC_FRC-0814.indd 12 2013-08-14 오후 1:11:19 Télécommande Pour allumer et éteindre le produit. FUNCTION Pour passer au mode Téléviseur et contrôler le téléviseur, appuyez sur la touche TV. Pour passer au mode Cinéma maison et le contrôler, appuyez sur la touche BD. Appuyez sur les touches numériques pour exécuter les options. TV SOURCE RECEIVER BD TV SLEEP 1 2 3 4 5 6 7 8 9 DISC MENU TITLE MENU 0 Pour accéder au menu Disque. POPUP Pour couper le son provisoirement. MUTE VOL TV SOUND TUNING / CH Pour accéder au menu Accueil. FULL SCREEN REPEAT HOME Appuyez pour afficher le format plein écran sur un téléviseur. TOOLS INFO Ces touches sont utilisées pour les menus du produit ainsi que pour plusieurs fonctions de disque Blu-ray. Pour utiliser Smart Hub. Appuyez pour sélectionner MANUEL/PRÉRÉGLER dans la fonction de syntonisation. Pour rechercher les contenus. Pour sélectionner la langue audio du disque. Appuyez pour ouvrir et fermer le tiroir disque. Appuyez pour restituer le signal audio par les enceintes du cinéma maison ou les haut-parleurs du téléviseur. (Voir page 42.) Pour répéter la lecture d’un titre, d’un chapitre, d’une piste ou d’un disque. Pour afficher les données de lecture durant la lecture d’un disque Blu-ray/ DVD. Pour sélectionner les éléments du menu à l’écran et en changer les valeurs. Pour revenir au menu précédent. Pour ouvrir et fermer le tiroir disque. Pour utiliser la fonction NFC, reliez l’appareil Bluetooth à source compatible par le l’arrière de la télécommande. (Voir page 39.) Pour accéder au menu contextuel/ menu des titres. Pour interrompre la lecture d’un disque. Pour rechercher les stations FM actives et changer les chaînes. Pour arrêter/lire un disque. Pour utiliser le menu Outils. Pour régler l’heure de l’extinction du produit. Pour effectuer une recherche vers l’avant ou vers l’arrière. Pour effectuer un saut vers l’avant ou vers l’arrière. Pour régler le volume. Appuyez pour afficher le format plein écran sur un téléviseur (HDMI, AUX, BD/DVD, etc.). ou Pour sélectionner le mode vidéo du téléviseur. EXIT RETURN A SMART B TUNER MEMORY MO/ST C D SEARCH S/W LEVEL 3D SOUND Pour quitter le menu. Pour régler une fréquence radio préréglée. Sélectionnez la fréquence de diffusion radio MONO ou STÉRÉO. HUB MANUAL PRESET AUDIO SUBTITLE SOUND Pour appliquer l’effet sonore 3D. EFFECT Pour appliquer les effets sonores. Pour régler le volume du caisson des basses. Pour sélectionner la langue des sous-titres du disque. Français HT-F9730W_ZC_FRC-0814.indd 13 Pour démarrer Aperçu de la télécommande 02 Pour apparier les appareils NFC (Near Field Communication) avec votre cinéma maison, vous devez d’abord apparier la télécommande avec le cinéma maison. Consultez la page 39. L’appariement s’effectue automatiquement si vous appuyez sur une touche de la télécommande après la première mise en fonction du cinéma maison. 13 | 2013-08-14 오후 1:11:21 Pour démarrer Installation des piles dans la télécommande Marque Type de piles : AAA 1 2 | REMARQUE | Assurez-vous de placer les signes « + » et « – » des extrémités des piles tel que l’indique le diagramme à l’intérieur du compartiment. Si le téléviseur fonctionne selon un usage normal du téléviseur, les piles durent environ un an. La télécommande peut être utilisée à une distance pouvant aller jusqu’à 7 mètres (23 pi) du produit, en ligne droite. Réglage de la télécommande Vous pouvez commander certaines fonctions de votre téléviseur à l’aide de cette télécommande. Pour commander un téléviseur avec la télécommande 1. 2. 3. 4. Appuyez sur la touche TV pour régler la télécommande au mode Téléviseur. Allumez votre téléviseur. Tout en maintenant la touche MARCHE/ARRÊT enfoncée, entrez le code correspondant à votre marque de téléviseur. • Si le tableau fournit plus d’un code pour votre téléviseur, entrez-les un après l’autre afin de déterminer le code approprié. • Exemple : Pour un téléviseur Samsung Tout en maintenant la touche MARCHE/ARRÊT enfoncée, utilisez les touches numériques pour entrer 00. Si cela ne fonctionne pas, essayez 15, puis 16, etc. Si le téléviseur s’éteint, cela signifie que le réglage a été exécuté. • Vous pouvez utiliser les touches MARCHE/ ARRÊT TV, VOLUME, CHAÎNE, ainsi que les touches numériques (0 à 9). | REMARQUE | La télécommande pourrait ne pas être en mesure de commander certaines fonctions, selon la marque de téléviseur. La télécommande pourrait également ne pas fonctionner sur certaines marques de téléviseurs. Par défaut, la télécommande fonctionnera avec un téléviseur Samsung. Ne vous débarrassez pas des piles en les faisant brûler. Les piles ne doivent pas être court-circuitées, démontées ou subir de surchauffe. Le remplacement incorrect des piles peut entraîner un danger d'explosion. Remplacez-les uniquement par des produits similaires ou équivalents. | 14 Français HT-F9730W_ZC_FRC-0924.indd 14 Codes de la télécommande de téléviseur Code Marque Code Mitsubishi/MGA 18, 40, 59, 60, 75 Admiral (M.Wards) 56, 57, 58 MTC 18 A Mark 01, 15 NEC 18, 19, 20, 40, 59, 60 Anam 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14 Nikei Onking Onwa 03 03 03 06, 07, 08, 09, 54, 66, 67, 73, 74 18 03, 15, 17, 18, 48, 54, 59, 62, 69, 90 15, 17, 18, 40, 48, 54, 62, 72 63, 66, 80, 91 15, 18, 59 40 06, 66, 67 17, 48, 56, 60, 61, 75 18, 59, 67, 76, 77, 78, 92, 93, 94 03, 19 40 AOC 01, 18, 40, 48 Bell & Howell (M.Wards) 57, 58, 81 Brocsonic 59, 60 Panasonic Penney Candle 18 Cetronic 03 Citizen 03, 18, 25 Cinema 97 Classic 03 Concerto 18 Contec 46 Coronado 15 Philco Philips Pioneer Portland Proton Quasar Radio Shack Craig 03, 05, 61, 82, 83, 84 RCA/Proscan Croslex 62 Crown 03 Realistic Sampo Curtis Mates 59, 61, 63 CXC 03 Daewoo 02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 34, 35, 36, 48, 59, 90 Daytron 40 Dynasty 03 Emerson 03, 15, 40, 46, 59, 61, 64, 82, 83, 84, 85 Fisher 19, 65 Funai 03 Futuretech 03 General Electric 06, 40, 56, 59, 66, 67, 68 (GE) Hall Mark 40 Hitachi 15, 18, 50, 59, 69 Inkel 45 JC Penny 56, 59, 67, 86 Samsung 00, 15, 16, 17, 40, 43, 46, 47, 48, 49, 59, 60, 98 Sanyo Scott Sears Sharp Signature 2000 (M.Wards) 19, 61, 65 03, 40, 60, 61 15, 18, 19 15, 57, 64 Sony 50, 51, 52, 53, 55 Soundesign 03, 40 57, 58 Spectricon 01 SSS 18 Sylvania 18, 40, 48, 54, 59, 60, 62 61, 95, 96 06 18 03, 15, 18, 25 18, 40 19, 57, 63, 71 18 03, 15, 40 Symphonic Tatung Techwood Teknika TMK Toshiba Vidtech KMC 15 Videch 59, 60, 69 LG (Goldstar) 01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44 Wards 15, 17, 18, 40, 48, 54, 60, 64 Luxman 18 Yamaha 18 LXI (Sears) 19, 54, 56, 59, 60, 62, 63, 65, 71 York 40 Yupiteru 03 Magnavox 15, 17, 18, 48, 54, 59, 60, 62, 72, 89 Zenith 58, 79 Marantz 40, 54 Zonda 01 Matsui 54 Dongyang 03, 54 MGA 18, 40 JVC 70 KTV 59, 61, 87, 88 KEC 2013-09-24 1:34:58 Connexions Cette section couvre différentes méthodes pour connecter le produit à d’autres périphériques. Avant de déplacer ou d’installer le produit, assurez-vous de couper l’alimentation et de débrancher le cordon d'alimentation. 03 Centrale Mise en place du produit Placez le produit sur un socle, sur une étagère du meuble ou sous le pied du téléviseur. Avant/Avant supérieure (D) Caisson des basses Produit Ambiophonique (D) Avant/Avant supérieure (G) Ambiophonique (G) Sélection de la position d’écoute La position d’écoute devrait se situer à une distance du téléviseur équivalente à 2,5 à 3 fois la taille de l’écran du téléviseur. Par exemple, si vous avez un écran de 46 po, placez la position d’écoute à une distance de 115 à 138 po (9,6 à11,5 pi) de l’écran. Module récepteur sans fil Enceintes Avant/Avant supérieures Placez les enceintes face à votre position d’écoute, dirigées vers l’intérieur (selon un angle de 45 ° environ), vers vous. Placez les enceintes avant de façon à ce que leurs haut-parleurs d’aigus se trouvent à la hauteur de votre oreille. Alignez la face avant des enceintes avant/avant supérieures avec la face avant de l’enceinte centrale ou placez-les légèrement devant l’enceinte centrale. Enceinte centrale Il est préférable d’installer l’enceinte centrale à la même hauteur que les enceintes avant/avant supérieures. Vous pouvez aussi l’installer directement sur ou sous le téléviseur. Enceintes ambiophoniques Placez ces enceintes de chaque côté de votre position d’écoute. S’il n’y a pas assez d’espace, placez-les de sorte qu’elles soient face à face. Placez-les à environ 60 à 90 cm (2 à 3 pi) audessus de votre oreille, légèrement dirigées vers le bas. * Contrairement aux enceintes avant et centrale, les enceintes ambiophoniques sont essentiellement utilisées pour les effets sonores. Elles ne produisent pas de son en permanence. Caisson des basses Connexions Connexion des enceintes La mise en place du caisson des basses n’est pas aussi importante. Placez-le à l’endroit qui vous convient. * Les enceintes ambiophoniques doivent être connectées au module récepteur sans fil. Composants des enceintes SWA-6000 Vis (5x20) x 8 Câble D’enceinte x 4 Centrale Avant/Avant Ambiophoniques Supérieures x 2 x2 Pied x 2 Base du Pied x 2 Caisson des basses Module récepteur sans fil Français HT-F9730W_ZC_FRC-0814.indd 15 15 | 2013-08-14 오후 1:11:25 Connexions Installation des enceintes sur le pied Tallboy 1. Trouvez le câble d’enceinte qui est fixé au socle. Retournez le socle et le pied du socle, démêlez le câble d’enceinte, puis passez-le dans l’orifice du pied du socle. 1 2 Base du Pied | REMARQUE | Manipulez le socle avec soin. Il est lourd. 2. Rattachez le pied du socle au bas du socle. 3. Insérez trois vis 5x20 dans les orifices du pied du socle, puis serrez-les à l’aide d’un tournevis comme dans l’illustration. 4. Fixez l’enceinte au socle. Pied 3 4 Enceinte Pied 5. Insérez une vis 5x15 dans l’orifice de passage de vis à l’arrière de l’enceinte, puis serrez-la à l’aide d’un tournevis. 6. L’illustration 6 montre l’enceinte après son assemblage. Répétez les étapes 1 à 5 avec l’autre enceinte, puis passez à l’étape 7. 7. Faites correspondre la fiche de couleur à l’extrémité du fil à enceinte branché à chaque enceinte avec les prises de couleur à l’arrière du cinéma maison, puis insérez chaque fiche. 5 6 Connexion des enceintes 1. Accouplez chaque faisceau de câbles avec l’enceinte appropriée en appariant la fiche codée par couleur de chaque faisceau avec l’étiquette de couleur apposée sur chaque enceinte. 2. Pour fixer le câble d’enceinte à chaque enceinte : a. Appuyez sur la languette rouge située à l’arrière de l’enceinte, insérez le fil rouge et relâchez la languette. b. Appuyez sur la languette noire située à l’arrière de l’enceinte, insérez le fil noir et relâchez la languette. 3. 4. 5. 6. Noir Rouge Branchez les fiches de contact situées à l’arrière du produit en faisant concorder les couleurs des fiches et des prises d’enceinte. Raccordez les enceintes ambiophoniques gauche et droite au module récepteur sans fil. De nouveau, appariez les couleurs des fiches aux prises situées sur le module récepteur sans fil. Branchez le cordon d’alimentation du module récepteur sans fil dans la prise murale. Allumez le produit. Le produit et le module récepteur sans fil sont maintenant en communication et vous pouvez entendre le son des enceintes ambiophoniques. | 16 Français HT-F9730W_ZC_FRC-0814.indd 16 2013-08-14 오후 1:11:30 Enceinte centrale 03 SPEAKERS OUT Caisson des basses CENTER FRONT SUBWOOFER FRONT L R FRONT TOP L FRONT TOP R Connexions Enceinte avant/ avant sup. (G) IMPEDANCE : 3 Enceinte ambiophonique (G) Enceinte avant/ avant sup. (D) Enceinte ambiophonique (D) L ASC IN SPEAKERS OUT T N CENTER FRONT SUBWOOFER FRONT L R FRONT TOP L FRONT TOP R IMPEDANCE : 3 Module récepteur sans fil * Ce produit devrait être uniquement connecté au SWA-6000. | MISES EN GARDE | Si vous voulez installer les enceintes sur le mur, vissez les vis ou plantez les clous (non fournis) fermement dans le mur à l’endroit où vous souhaitez placer l’enceinte, puis en utilisant l’orifice à l’arrière de l’enceinte, suspendez précautionneusement l'enceinte sur la vis ou le clou. Ne laissez pas les enfants jouer avec les enceintes ou à proximité. Ils pourraient se blesser si une enceinte tombe. Lorsque vous connectez les fils des enceintes aux enceintes, assurez-vous que la position de la polarité (+/ –) est correcte. Maintenez le caisson des basses hors de la portée des enfants pour éviter qu’ils insèrent leurs mains ou des matières étrangères dans le conduit (orifice) du caisson. Ne suspendez pas le caisson des basses au mur par le conduit (orifice). L’antenne de réception sans fil est intégrée au module récepteur sans fil. N’exposez pas l’appareil à l’eau ou à l’humidité. Pour une performance d’écoute optimale, assurez-vous que la zone autour du module récepteur sans fil n’est pas obstruée. Si aucun son ne sort des enceintes ambiophoniques sans fil, passez au mode Dolby Pro Logic II. En mode 2-CH, les enceintes ambiophoniques sans fil ne produisent pas de son. | REMARQUE | Une enceinte placée près de votre téléviseur pourrait altérer la couleur de l’écran en raison du champ magnétique. Placez le module récepteur sans fil à l’arrière de la position d’écoute. Si le module récepteur sans fil est trop proche du produit, le son produit par les enceintes pourrait être perturbé par les interférences. Si vous utilisez un appareil tel qu’un four micro-ondes, une carte RL sans fil ou tout autre dispositif qui utilise des fréquences de 2,4/5,8 GHz à proximité du produit, le son produit par les enceintes pourrait être perturbé par les interférences. La portée des ondes radio est d’environ 10 m (33 pi) du produit au module récepteur sans fil; toutefois, elle varie en fonction de l’environnement d'installation. Un mur de béton armé ou métallique situé entre l'unité principale et le module récepteur sans fil peut provoquer un arrêt complet du système en raison des ondes radio qui ne peuvent pas pénétrer le métal. Si le produit n’établit pas la connexion sans fil, vous devrez exécuter une ID définie entre le produit et le module récepteur sans fil. Alors que le produit est éteint, appuyez sur les touches "0"->"1"->"3"->"5" de la télécommande. Allumez le module récepteur sans fil. Ensuite, appuyez pendant 5 secondes sur le bouton « ID SET » (ID DÉFINIE) situé à l’arrière du module récepteur sans fil, puis allumez le produit. Français HT-F9730W_ZC_FRC-0814.indd 17 17 | 2013-08-14 오후 1:11:34 Connexions Branchement à des périphériques externes/un téléviseur AUX IN L FM ANT HDMI OUT 1 HDMI IN 2 DIGITAL AUDIO IN CENTER FRONT SUBWOOFER FRONT L R FRONT TOP L FRONT TOP R LAN IMPEDANCE : 3 L R W FM ANT POWER OPTICAL ASC IN R SPEAKERS OUT AUX IN LAN Rouge 1 HDMI OUT HDMI IN R 2 OPTICAL DIGITAL AUDIO IN Blanc Méthode 1 HDMI IN Périphériques Méthode 2 HDMI OUT Méthode 3 AUDIO OUT OPTICAL OUT Connexion à un téléviseur Connectez un câble HDMI (non fourni) de la prise de sortie HDMI OUT située à l’arrière du produit à la prise d’entrée HDMI IN de votre téléviseur. Si vous avez réglé la télécommande du produit de sorte qu’elle commande votre téléviseur, appuyez sur la touche TV SOURCE de la télécommande et sélectionnez HDMI comme source externe du téléviseur. Connexion aux périphériques Pour sélectionner le mode approprié à un périphérique, appuyez sur le touche FUNCTION. Chaque fois que vous appuyez sur ce touche, le mode change dans l’ordre suivant : BD/DVD D. IN AUX HDMI1 HDMI2 FM BT Méthode 1 ENTRÉE HDMI : Connexion à un périphérique au moyen d’un câble HDMI Connectez un câble HDMI (non fourni) de la prise d’entrée HDMI IN située à l’arrière du produit à la prise de sortie HDMI OUT de votre appareil numérique. Sélectionnez le mode HDMI1 ou HDMI2. Méthode 2 ENTRÉE AUX : Connexion d’un composant périphérique analogique À l’aide d’un câble audio RCA (non fourni), connectez la prise d’entrée AUDIO In du produit à la prise de sortie AUDIO Out du périphérique analogique. Sélectionnez le mode AUX. • Assurez-vous d’apparier les couleurs des fiches du câble avec les couleurs des prises d’entrée et de sortie. Méthode 3 OPTIQUE : Connexion à un composant audio de périphérique Pour connecter la sortie audio numérique des composants à signal numérique tels que les boîtes de jonction de câbles et les récepteurs satellites (décodeurs). À l’aide d’un câble optique numérique (non fourni), connectez la prise Entrée audio optique numérique du produit à la prise Sortie optique numérique du périphérique de l’appareil numérique externe. Sélectionnez le mode D. IN. | REMARQUE | Pour regarder la vidéo depuis votre récepteur à boîte de jonction/satellite, vous devez connecter sa sortie vidéo directement à votre téléviseur. Ce système prend en charge les fréquences d’échantillonnage numériques de 32 kHz et plus des composants de périphériques numériques. Ce système prend uniquement en charge l’audio DTS et Dolby Digital. L’audio MPEG, qui a un format de train de bits, n’est pas prise en charge. | 18 Français HT-F9730W_ZC_FRC-0814.indd 18 2013-08-14 오후 1:11:35 Connexion à un routeur réseau Réseau sans fil 03 Vous pouvez connecter votre produit à votre réseau selon l'une des méthodes illustrées ci-après. Connexions Réseau câblé L FM ANT POWER OPTICAL ASC IN 1 HDMI IN 2 R DIGITAL AUDIO IN SPEAKERS OUT AUX IN LAN HDMI OUT CENTER FRONT SUBWOOFER FRONT L R FRONT TOP L FRONT TOP R IMPEDANCE : 3 Point d'accès sans fil Modem à large bande (avec routeur intégré) Service à large bande Service à large bande Ou Router | REMARQUE | Si votre routeur IP sans fil prend en charge le protocole Service à large bande Modem à large bande DHCP, ce produit peut utiliser une adresse DHCP ou une adresse IP fixe pour se connecter au réseau sans fil. Réglez votre routeur IP sans fil au mode Infrastructure. Le mode Ad-hoc n'est pas pris en charge. Le produit ne prend en charge que les principaux protocoles de sécurité sans fil suivants : - WEP(OUVERT/PARTAGÉ), WPA-PSK(TKIP/AES), WPA2-PSK(TKIP/AES) | REMARQUE | Sélectionnez un canal qui n’est pas actuellement Votre routeur ou les politiques du fournisseur de utilisé sur votre routeur IP sans fil. Si le canal réglé pour le routeur IP sans fil est actuellement utilisé par un autre appareil qui se trouve à proximité, des interférences et une coupure de la communication vont se produire. Conformément aux nouvelles spécifications de certification Wi-Fi, les cinémas maison Samsung ne prennent pas en charge le cryptage de sécurité WEP, TKIP ou TKIP-AES (WPS2mixte) dans des réseaux utilisant le mode 802.11n. De par sa nature, un réseau sans fil local peut provoquer des interférences, selon les conditions d’utilisation (performance des points d’accès, distance, obstacles, interférences générées par d’autres périphériques, etc.). service Internet peuvent empêcher le produit d’accéder au serveur de mise à jour du logiciel Samsung. Si cela se produit, communiquez avec votre fournisseur de service Internet (ISP) pour des plus amples renseignements. Les utilisateurs de connexion DSL doivent utiliser un routeur pour établir la connexion à un réseau. Pour utiliser la fonction AllShare, vous devez connecter votre PC à votre réseau, tel que montré dans les illustrations ci-dessus. La connexion peut être câblée ou sans fil. Français HT-F9730W_ZC_FRC-0814.indd 19 19 | 2013-08-14 오후 1:11:37 Définition des Paramètres Procédure relative aux paramètres • Le menu Accueil ne s’affiche pas si vous ne définissez pas les paramètres initiaux. • L’OSD (affichage à l’écran) de ce produit peut changer après la mise à niveau de la version du logiciel. • Les étapes de l’accès peuvent différer selon le menu que vous sélectionnez. La procédure Paramètres initiaux vous permet de régler l’affichage à l’écran et les langues des menus, de configurer la connexion à votre réseau domestique, de choisir le rapport d’aspect (taille de l’écran et format) qui convient à votre téléviseur et de mettre le logiciel de votre produit à jour, si l’on dispose d’une telle mise à jour. Suivez la séquence à l'écran pour obtenir des directives complètes sur la fonction Paramètres initiaux. | REMARQUE | Si vous souhaitez afficher de nouveau l’écran Paramètres initiaux et effectuer des changements, sélectionnez Paramètres > Système > Configuration dans l’écran Accueil ou sélectionnez l’option Réinitialiser. (Voir la page 23) Écran Accueil 1 Films et émissions de télévision 3 Photos, vidéos et musique : Permet de visionner des photos et des vidéos ou d’écouter de la musique provenant d’un disque, d’un périphérique USB, d’un ordinateur ou d’appareils mobiles. 4 Paramètres : Définissez toute une variété de fonctions adaptées à vos préférences personnelles. 5 Applications recommandées : Une liste d’applications populaires et utiles que nous vous recommandons de télécharger. 6 Navigateur Web : Vous pouvez accéder à Internet par l’application du navigateur Web. 7 ROUGE (A) : Appuyez sur la touche ROUGE (A) de la télécommande pour créer un compte Samsung ou vous y brancher. BLEU (D) : Configurez la fonction Screen Mirroring entre le cinéma maison et un téléphone intelligent ou une tablette. Sélection d’une option sur l’écran Accueil 1. Pour sélectionner une option de l’écran Accueil, déplacer le curseur à l’aide des touches ▲▼◄► jusqu’à ce que l’option de votre choix soit en surbrillance, puis appuyez sur la touche E. | REMARQUE | 2 Applications 3 4 Si le produit demeure inutilisé en mode d'arrêt pendant plus de 5 minutes, un économiseur d’écran s’affiche sur le téléviseur. Si le produit demeure en mode d’économiseur d’écran pendant plus de 20 minutes, il s'éteint automatiquement. Accès à l’écran Paramètres Photos, vidéos et musique 1. Ajouter une Ajouter une Ajouter une application application application Navigateur Web Sur l’écran Accueil, sélectionnez Paramètres puis appuyez sur la touche E. L'écran Paramètres apparaît. Paramètres Paramètres Affichage a Compte Samsung d Screen Mirroring Affichage Sortie UHD 5 6 Audio 7 Réseau 2 Format d'image télé 16:9 original Fonctions Smart BD Wise Définition Système Fréquence cinéma (24 ips) Assistance Conversion DVD 24Fs Films et émissions de télévision : Téléchargez des films et des programmes télévisés de l’Internet. 1 Auto Réglages 3D Désac. Auto Auto Désac. | REMARQUE | Selon votre pays, cette fonction de menu pourrait ne pas être prise en charge. Applications : Permet d’accéder à des applications facturables ou gratuites et de les télécharger. 2. Pour accéder aux menus, aux sous-menus et aux options de l’écran Paramètres, veuillez vous reporter à l’illustration de la télécommande de la page suivante. | 20 Français HT-F9730W_ZC_FRC-0814.indd 20 2013-08-14 오후 1:11:40 Touches de la commande utilisées pour le menu Paramètres TOOLS INFO Réglages 3D RETURN EXIT Format d'image télé Vous permet de régler la sortie du produit en fonction de la taille de l’écran de votre téléviseur. Voir page 52. BD Wise BD Wise est la fonctionnalité d’interconnectivité la plus récente de Samsung. Lorsque vous interconnectez un produit Samsung et un téléviseur Samsung avec BD Wise au moyen d'un câble HDMI, si la fonction BD Wise est activée sur le produit et sur le téléviseur, le produit diffuse la vidéo à la résolution et à la fréquence d'images vidéo du disque BD/DVD. Définition Vous permet de définir la résolution de sortie du signal vidéo HDMI à BD Wise, Auto, 1080p, 1080i, 720p, 480p. Ce nombre indique le nombre de lignes vidéo par image. Les lettres i et p désignent respectivement le balayage entrelacé et progressif. Plus le nombre de lignes est important, plus la qualité est élevée. Fréquence cinéma (24 ips) Le réglage de la fonction Fréquence cinéma (24 ips) à Auto autorise le produit à régler automatiquement sa sortie HDMI à 24 images par seconde pour améliorer la qualité de l’image si le produit est connecté à un téléviseur compatible avec la fréquence 24 ips. • Vous pouvez utiliser la fonction Fréquence cinéma (24 ips) uniquement avec un téléviseur qui prend en charge cette fréquence d’image. • L’option Fréquence cinéma est seulement accessible si le produit est en mode de résolution de sortie HDMI 1080p. Conversion DVD 24Fs Convertit le contenu d’un DVD en 24 images par seconde et le restitue au moyen de l’interface HDMI. Cette option est uniquement offerte si la fonction Fréquence cinéma (24 ips) est activée. 3 2 TUNER MEMORY 4 MO/ST 1 Touche HOME : Pour accéder au menu Accueil. 2 Touche RETURN : Pour revenir au menu précédent. 3 Touche E (Entrer) / DIRECTION : • Appuyez sur les touches ▲▼◄► pour déplacer le curseur ou sélectionner un élément du menu. • Appuyez sur la touche E pour activer l’élément actuellement sélectionné ou confirmer un paramètre. 4 Touche EXIT : Appuyez sur cette touche pour quitter le menu. Information détaillée sur les fonctions Chaque fonction Paramètres, élément du menu et option individuelle sont expliqués en détail à l’écran. Pour afficher une explication, utilisez les touches ▲▼◄► pour sélectionner la fonction, l’élément du menu ou l’option. L’explication s'affiche habituellement à la droite de l’écran. Une courte description de la fonction Paramètres est fournie sur cette page. L’annexe de ce guide contient des renseignements supplémentaires sur certaines fonctions. Fonctions du menu Paramètres Affichage Cette option restitue la vidéo HDMI à une résolution de UHD. Cette option est uniquement offerte si la fonction Fréquence cinéma est réglée à Auto. Sortie UHD | REMARQUE | Pour utiliser cette fonction, vous devez brancher le produit à un dispositif qui prend en charge une résolution de UHD et vous devez lire du contenu qui lit à 24 images/ secondes (vitesse du film). Français HT-F9730W_ZC_FRC-0814.indd 21 Définition des Paramètres 1 REPEAT HOME 04 FULL SCREEN Pour configurer les fonctions liées à l’option 3D. Mode lecture Blu-ray 3D: Sélectionnez ce mode si vous souhaitez la lecture en 3D du disque Blu-ray avec un contenu 3D. Si vous passez au menu Accueil ou Smart Hub en mode 3D, le produit passera automatiquement au mode 2D. Taille écran: Entrez la taille du téléviseur connecté au produit. Le produit adaptera automatiquement la sortie 3D à la taille de l’écran du téléviseur. 21 | 2013-08-14 오후 1:11:43 Définition des Paramètres Taille écran Smart Hub Vous permet de sélectionner la taille optimale pour l’écran Smart Hub. Format couleurs HDMI Vous permet de régler le format de l'espace couleur pour la sortie HDMI selon les fonctionnalités de l'appareil connecté (téléviseur, moniteur, etc.). Vous permet de définir le produit de façon à diffuser la vidéo avec des couleurs profondes depuis la prise de sortie HDMI OUT. Le mode Couleurs profondes reproduit les couleurs plus précisément et selon une plus grande intensité. Vous permet d'améliorer la qualité de l’image lors du visionnement de disques DVD. Couleurs profondes HDMI Mode progressif Canal retour audio Vous permet de diriger le son du téléviseur vers les enceintes du cinéma maison. Requiert une connexion HDMI et un canal retour audio (ARC) compatible avec le téléviseur. • Si Canal de retour du son est réglé à Activ. et si vous utilisez un câble HDMI pour connecter le produit au téléviseur, l’entrée optique numérique ne fonctionne pas. • Si Canal de retour du son est réglé à Auto et si vous utilisez un câble HDMI pour connecter le produit au téléviseur, ARC et l’entrée optique numérique ne fonctionnent pas automatiquement. Sortie numérique Vous permet de définir la sortie numérique selon les fonctionnalités du récepteur A/V que vous avez connecté au produit. Pour de plus amples renseignements, veuillez vous reporter au tableau Sélection de la sortie numérique (Voir page 54.) Réglage de la plage dynamique Règle la compression dynamique pour les formats audio Dolby Digital, Dolby Digital Plus et Dolby TrueHD. Auto: Commande automatiquement la plage dynamique du son Dolby TrueHD en fonction de l’information reçue de la piste sonore Dolby TrueHD. Désactive également la plage dynamique pour les normes Dolby Digital et Dolby Digital Plus. Désac.: Aucune compression dynamique, vous laisse entendre le son original. Activ.: Active la compression dynamique pour les trois formats Dolby. Le volume des sons feutrés est augmenté et le volume des sons bruyants est diminué. Mode de mixage réducteur Vous permet de sélectionner l'option pour convertir de façon descendante le son multicanal qui est compatible avec votre chaîne stéréo. Vous pouvez opter pour une démultiplication des données. Celle-ci sera effectuée par le produit qui convertira les données en format stéréo normal ou en un format ambiophonique compatible. Sync. audio Vous permet, lorsque le produit est connecté à un téléviseur numérique, de régler le décalage du son de façon à ce que l’audio soit synchronisée avec la vidéo. Vous pouvez régler le décalage entre 0 et 300 millisecondes. Audio Réglage hautparleurs Calibrage automatique du son Vous permet de configurer les paramètres de l’enceinte suivants et d'activer et de désactiver les tonalités de test pour que vous puissiez vérifier les enceintes. Niveau: Vous permet de régler le niveau sonore de chaque hautparleur de 6 dB à -6 dB. Par exemple, si vous aimez les basses profondes, vous pouvez augmenter le niveau sonore du caisson des basses de 6 dB. Distance: Vous permet de régler la distance relative de chaque enceinte de la position d’écoute jusqu’à 9 mètres. Plus la distance est grande, plus le son restitué par les enceintes sera fort. Tonalité d'essai: Tonalité d'essai : Vous permet d’exécuter la fonction de tonalités d’essai pour que vous puissiez vérifier vos réglages. Régler la Tonalité d’essai à Activée permet d’activer cette fonction. Le réglage à Désactivée désactive la fonction. Lorsque vous utilisez la fonction d’étalonnage automatique du son, le produit crée automatiquement un champ sonore 7,1 optimisé pour votre environnement. Voir page 25. Égaliseur Vous permet de configurer manuellement les paramètres de l’égaliseur. Volume intelligent Vous permet de configurer le produit de sorte que le volume demeure stable lorsqu’un changement de scène se produit ou lorsque vous changez de chaîne. Sélect. hautparleur Vous permet de sélectionner les enceintes que vous souhaitez activer, soit les enceintes du téléviseur ou celles du cinéma maison. | 22 Français HT-F9730W_ZC_FRC-0814.indd 22 2013-08-14 오후 1:11:46 Vous pouvez bloquer l’accès au contenu de vidéo sur demande (VOD) en fonction de sa classification. | REMARQUE | Le NIP de sécurité par défaut est 0000. Selon votre pays, cette fonction de menu pourrait ne pas être prise en charge. Conditions, politique de confid. Vous permet d’afficher les conditions de même que les politiques relatives à la vie privée de Smart Hub. Rèinitialiser Smart Hub Réinitialise tous les paramètres de Smart Hub aux valeurs par défaut. | REMARQUE | Le NIP de sécurité par défaut est 0000. Wi-Fi Direct Paramètres AllShare Device Name Paramètres BD-Live | REMARQUE | Des fichiers texte, comme des fichiers portant une extension .TXT ou .DOC pourraient ne pas s’afficher lors de l’utilisation de la fonction Wi-Fi Direct. Vous permet de gérer les périphériques de votre réseau, comme des téléphones intelligents et des tablettes, qui sont autorisés à partager le contenu de votre téléviseur. Vous permet d’attribuer un nom d’identification au produit. Vous pouvez utiliser ce nom pour identifier le produit lorsque vous le connectez à des périphériques Wi-Fi (téléphones intelligents, tablettes, etc.). Pour configurer diverses fonctions BDLive. BD-Live vous permet d’accéder à des fonctions supplémentaires offertes sur certains disques Blu-ray si vous êtes connecté à Internet. Connexion Internet BD-Live : Vous permet d’autoriser pleinement, d’autoriser partiellement ou de refuser l’accès à une connexion Internet BD-Live. Gestion données Blu-ray : Gère les données BD du service BD-Live ou du disque Blu-ray. Configuration Vous permet d’exécuter de nouveau la procédure de paramétrage initiale. Langue Vous pouvez sélectionner votre langue préférée pour les options Menu à l'écran, Menu du Disque, Sous-titres, etc. • La langue que vous sélectionnez pour le menu des disques, l’audio des disques ou les sous-titres apparaîtra uniquement si elle est prise en charge par le disque. Définition des Paramètres Paramètres réseau Vous permet de vérifier le réseau actuel et l’état Internet. Configure la connexion réseau pour que vous puissiez profiter des diverses fonctions comme des services Internet ou AllShare Wi-Fi et effectue des mises à niveau des logiciels. Vous permet de brancher un périphérique Wi-Fi Direct au produit au moyen du réseau peer-to-peer sans avoir recours à un routeur sans fil. Veuillez noter que si le produit est connecté à un réseau sans fil, il pourrait être déconnecté pendant que vous utilisez Wi-Fi Direct. 04 Verrouillage de classement VOD Réseau État du réseau Système Vous pouvez connecter un clavier ou une souris sans fil USB au port USB situé à l’avant du produit. Réglages du clavier: Vous permet de configurer un clavier sans fil USB connecté au produit. Gest. périph. | REMARQUE | Vous pouvez uniquement utiliser le clavier sur un écran à clavier QWERTY. Réglages de souris : Vous permet de configurer une souris sans fil USB connectée au produit. Vous pouvez utiliser la souris dans le menu du produit, de la même façon que vous utilisez une souris avec votre PC. Pour utiliser une souris avec le menu du produit : Fonctions Smart Réglage des app. Vous permet de confirmer les réglages de notifications de l’application et d’afficher l’application de base concernant vos applications. Param. de notification forcée : Permet de recevoir des notifications des services sélectionnés. Propriétés : Consultez les renseignements de base sur la fonction Apps. Français HT-F9730W_ZC_FRC-0814.indd 23 23 | 2013-08-14 오후 1:11:47 Définition des Paramètres 1. 2. 3. Connectez la souris USB au produit. Cliquez sur un touche primaire que vous avez sélectionné à la rubrique Paramètres de la souris. Le menu Simple apparaît. Cliquez sur les options de menu désirées. Général Vous pouvez spécifier le niveau de luminosité de l’affichage et le fuseau horaire. Affichage avant : Vous permet de modifier la luminosité du panneau avant. Fuseau hor. : Vous pouvez spécifier le fuseau horaire qui s’applique à votre région. Transparence menu : Modifiez la transparence du menu. Anynet+ (HDMI-CEC) Anynet+ est une fonction pratique qui autorise l’interfonctionnement avec d’autres produits Samsung dotés de la fonction Anynet+ et vous permet de commander ces produits avec une télécommande de téléviseur Samsung. Pour utiliser cette fonction, vous devez connecter ce produit à un téléviseur Samsung Anynet+ à l’aide d’un câble HDMI. Si vous souhaitez utiliser la fonction Anynet+ (HDMI-CEC), veuillez suivre les directives ci-dessous. 1) Branchez le produit à un téléviseur conforme à la norme Anynet+ (HDMICEC) à l’aide d’un câble HDMI. 2) Réglez la fonction Anynet+ (HDMI-CEC) à Activée à la fois sur le téléviseur et le produit. 3) Recherchez le produit dans la liste Anynet+ (HDMI-CEC) du téléviseur et sélectionnez-le. Pour des directives plus précises, consultez la section Anynet+ du guide d’utilisation du téléviseur. Gestion à distance Lorsqu’elle est activée, cette fonction permet aux agents du centre d'appels de diagnostiquer les problèmes et de les résoudre à distance. Requiert une connexion Internet active. Le service de gestion à distance n’est pas nécessairement offert dans tous les pays. Mise à jour du logiciel Pour de plus amples renseignements sur la fonction Mise à jour logicielle, voir la section « Mise à jour logicielle » de la page 28. Mode utilisation Vous permet de régler le mode Utilisateur. Si vous utilisez le cinéma maison à domicile, sélectionnez toujours Domicile. L'option Magasin correspond aux paramètres utilisés pour un magasin au détail. Communiquer avec Samsung Fournit les coordonnées pour obtenir de l'aide concernant votre produit. | REMARQUE | Gest. périph. Certains claviers et souris USB HIB Sécurité pourraient ne pas être compatibles avec ce lecteur. Certaines touches de clavier HID peuvent ne pas fonctionner. Les claviers USB câblés ne sont pas pris en charge. Il se peut que certaines applications ne soient pas prises en charge. Si un clavier HID ne fonctionne pas en raison des interférences, rapprochez-le du produit. Le NIP de sécurité par défaut est 0000. Entrez le NIP par défaut pour accéder à la fonction de sécurité si vous n’avez pas créé votre propre mot de passe. Classement BD : Restreindre la lecture de disques Blu-ray avec classements spécifiques à moins que le NIP ne soit entré. Classem. parental DVD : Empêche la lecture de DVD comportant un classement numérique spécifique à moins d'entrer le NIP. Changer NIP : Pour modifier le NIP à 4 chiffres utilisé pour accéder aux fonctions de sécurité. Changer NIP 1. Retirez le disque ou le périphérique USB. 2. Appuyez sur le touche 5 situé sur la face avant et maintenez-le enfoncé pendant 5 secondes ou plus. Tous les paramètres reviennent aux valeurs par défaut définies à l’usine. | REMARQUE | Si les paramètres par défaut sont rétablis, toutes les données utilisateur stockées dans les données BD sont supprimées. Assistance | 24 Français HT-F9730W_ZC_FRC-0814.indd 24 2013-08-14 오후 1:11:48 L FM ANT OPTICAL ASC IN R DIGITAL AUDIO IN SPEAKERS OUT AUX IN LAN CENTER FRONT SUBWOOFER FRONT L R FRON FRON IMPEDANCE : 3 Lorsque vous connectez ce produit à un réseau, vous pouvez utiliser les applications et les fonctions réseau telles que Smart Hub et BD-LIVE et mettre à niveau le logiciel du produit en utilisant la connexion Internet. Pour de plus amples renseignements sur les services Internet, consultez le chapitre Services réseau de ce manuel aux pages 43 à 51. Les directives pour configurer la connexion réseau débutent ci-dessous. Configuration de votre connexion réseau Si vous n’avez pas configuré votre connexion réseau durant la procédure de paramétrage initiale ou si vous devez réinitialiser la connexion réseau, suivez les directives ci-dessous. Avant de commencer, communiquez avec votre fournisseur de service pour savoir si votre adresse IP est statique ou dynamique. Si elle est dynamique et utilisez un réseau câblé ou sans fil, nous vous recommandons de suivre les procédures Automatique décrites ci-dessous. Si vous établissez la connexion à un réseau câblé, connectez le produit à votre routeur à l’aide d’un câble RL ou d’un adaptateur RL Samsung (vendu séparément) avant de commencer la procédure de configuration. Pour configurer la connexion réseau, suivez ces étapes : 1. Dans le menu Accueil, sélectionnez Paramètres, puis appuyez sur la touche E. 2. Sélectionnez Réseau, puis appuyez sur la touche E. 3. Sélectionnez Paramètres réseau, puis appuyez sur la touche E. 4. Consultez les instructions relatives aux réseaux câblés ci-dessous ou les instructions relatives au réseau sans fil qui commencent à la page 26. Microphone ASC Calibrage automatique du son Optez pour l’exécution ou l’activation de l’étalonnage automatique. • Désac.: L’unité produit le son selon la configuration des enceintes indiquées dans les réglages Enceinte. • Activ.: L’unité exécute la fonction d’étalonnage automatique du son et produit un son optimisé pour votre environnement selon les réglages de l’enceinte étalonnée. Exécution du calibrage automatique du son Réseau câblé Câblé – Automatique Suite aux étapes 1 à 3 ci-dessus: 1. Dans l'écran Paramètres réseau, remplacez Type de réseau par Câble. Sélectionnez ensuite Connexion, puis appuyez sur la touche E. Le produit détecte une connexion câblée, vérifie la connexion réseau, puis se branche au réseau. 2. Ensuite, surlignez OK, puis appuyez sur la touche E. Avant d’effectuer l’étalonnage, assurez-vous qu'aucun disque n’est resté dans le tiroir-disque. 1. Branchez le microphone ASC à la prise d’entrée ASC IN. 2. Installez le microphone ASC à la position d’écoute. • L’étalonnage automatique du son règle et étalonne automatiquement les enceintes dans l’ordre suivant : Avant gauche Centre Avant droit Ambioph. droit D avant supérieur G avant supérieur Ambioph. gauche Caisson de graves • Appuyez sur le bouton RETURN pour annuler le réglage d’étalonnage automatique du son. Câblé - Manuel Si vous avez une adresse IP statique ou si la procédure Automatique ne fonctionne pas, vous devrez définir manuellement les valeurs des paramètres réseau. Français HT-F9730W_ZC_FRC-0814.indd 25 Définition des Paramètres Calibrage automatique du son Il suffit de régler une seule fois la fonction d’étalonnage automatique du son (ASC) lorsque vous déplacez ou installez le produit; ce dernier reconnaîtra automatiquement la distance entre les enceintes, les différents niveaux de puissance entre les canaux et les caractéristiques de fréquence afin de reproduire un champ sonore 7,1 optimisé pour votre environnement d’écoute. Réseaux et Internet 04 Réinitialiser Tous les paramètres reviennent aux valeurs par défaut, sauf les paramètres réseau et les paramètres Smart Hub. La fonction Configuration est ensuite lancée. Requiert la saisie de votre NIP de sécurité. Le NIP de sécurité par défaut est 0000. 25 | 2013-08-14 오후 1:11:48 Définition des Paramètres Suite aux étapes 1 à 3 ci-dessus: 1. Réseau sans fil Dans l'écran Paramètres réseau, remplacez Type de réseau par Câble. Sélectionnez ensuite Connexion, puis appuyez sur la touche E. Le produit cherche un réseau, puis affiche le message indiquant que la connexion a échoué. | REMARQUE | S’il est possible de brancher le cinéma maison à votre réseau sans fil, sélectionnez Changer réseau à cette étape, remplacez le Type de réseau par Sans fil, puis consultez les directives de la page 26 portant sur les réseaux sans fil. Vous pouvez configurer un réseau sans fil de trois manières: - Sans fil - Automatique - Sans fil - Manuel - WPS(PBC) Avant de configurer la connexion réseau sans fil, débranchez tout périphérique réseau sans fil actuellement branché au produit ou, le cas échéant, la connexion câblée actuelle du produit. Sans fil - Automatique Après avoir suivi les étapes 1 à 3 de la section « Configuration de votre connexion réseau » à la page 25. Paramètres réseau 1. Echec de la connexion au réseau câblé. Adresse MAC Adresse IP Masque s.-réseau Passerelle Serveur DNS XX:XX:XX:XX:XX:XX 0. 0. 0. 0 0. 0. 0. 0 0. 0. 0. 0 0. 0. 0. 0 Dans l’écran Paramètres réseau, remplacez Type de réseau par Sans fil. Le produit cherche, puis affiche une liste de réseaux disponibles. Paramètres réseau Connexion impossible au réseau. Vérifiez que votre adresse IP est bien réglée dans Paramètres IP ou contactez votre fournisseur de service Internet pour plus d’infos. Sélectionnez type de réseau. Type de réseau Sans fil Réseau sans fil Changer réseau Param. IP Param. IP Fermer si-ap iptime 2. 3. 4. 5. 6. 2. Sélectionnez le réseau souhaité, puis appuyez sur la touche E. 3. Appuyez sur la touche ▲ ou ▼ pour passer à une autre valeur, puis saisissez les chiffres associés à cette valeur en suivant les directives de l’étape 4. Sur l'écran Sécurité, entrez le code de sécurité ou la phrase de passe correspondant à votre réseau. Entrez directement les numéros en utilisant les touches numériques de votre télécommande. Saisissez les lettres une à une à l’aide des touches ▲▼◄►, et en appuyant sur la touche E. 4. Ensuite, sélectionnez Fait, puis appuyez sur la touche E. Le produit vérifie la connexion réseau, puis se branche au réseau. Répétez les étapes 4 et 5 jusqu’à ce que toutes les valeurs soient fournies. | REMARQUE | Vous pouvez obtenir les valeurs du réseau de votre fournisseur de services Internet. 7. Vous pouvez connecter votre Lecteur Blu-ray à Internet. Sélectionnez le réseau sans fil à utiliser. iptime5G Utilisez les touches ◄► pour sélectionner Param. IP, puis appuyez sur la touche E. L’écran Paramètres IP apparaît. Sélectionnez le champ Param. IP, puis réglez-le à Entrer manuellement. Sélectionnez une valeur à saisir (par exemple l’adresse IP), puis appuyez sur E. Utilisez les touches numériques de votre télécommande pour saisir les chiffres. Vous pouvez aussi saisir les valeurs en utilisant les touches ▲▼. Utilisez les touches ◄► de la télécommande pour passer d’un champ de saisie à un autre pour une valeur. Lorsque vous avez terminé, appuyez sur la touche E. KIMING_VTOWER TIAS Rafraîchir WPS(PBC) | REMARQUE | Vous devriez être en mesure de trouver le code de sécurité ou la phrase de passe du réseau dans un des écrans de configuration que vous avez utilisés pour configurer votre routeur ou votre modem. Une fois que vous avez terminé de saisir toutes les valeurs, sélectionnez OK, puis appuyez sur la touche E. Le cinéma maison vérifie la connexion réseau, puis se branche au réseau. | 26 Français HT-F9730W_ZC_FRC-0814.indd 26 2013-08-14 오후 1:11:49 Sans fil - Manuel 9. Appuyez sur la touche ▲ ou ▼ pour passer à une autre valeur, puis saisissez les chiffres associés à cette valeur en suivant les directives de l’étape 8. | REMARQUE | 1. Dans l’écran Paramètres réseau, remplacez Type de réseau par Sans fil. Le produit cherche, puis affiche une liste de réseaux disponibles. 2. Parcourez la liste, sélectionnez le réseau désiré ou Ajouter réseau, puis appuyez sur la touche E. 11. Ensuite, sélectionnez OK, puis appuyez sur la touche E. L’écran Sécurité apparaît. 3. Si vous avez sélectionné un réseau à l’étape 2, passez à l’étape 6. Si vous avez sélectionné Ajouter réseau, passez à l’étape 4. 4. Entrez le nom de votre réseau sans fil ou de votre routeur sans fil. • Entrez les chiffres directement en utilisant les touches numériques de votre télécommande. • Entrez les lettres en sélectionnant chaque lettre à l’aide des touches ▲▼◄►, puis appuyez sur la touche E. • Pour afficher les lettres majuscules (ou réafficher les lettres minuscules si les majuscules sont affichées), , puis appuyez sur la touche E. sélectionnez • Pour afficher les symboles et les caractères de ponctuation, sélectionnez 123#&, puis appuyez sur la touche E. Pour réafficher les lettres, sélectionnez 123#&, puis appuyez sur la touche E. Ensuite, sélectionnez Fait, puis appuyez sur la touche E. 12. Sur l’écran Sécurité, saisissez le code de sécurité ou la phrase de passe du réseau. Saisissez les chiffres directement à l’aide des touches numériques de votre télécommande. Saisissez les lettres une à une à l’aide des touches ▲▼◄►, et en appuyant sur la touche E. 5. Lorsque l’écran Type de sécurité apparaît, utilisez les touches ▲▼ pour sélectionner le type de sécurité du réseau, puis appuyez sur la touche E. Sur l’écran suivant, saisissez le code de sécurité ou la phrase de passe du réseau. • Entrez les chiffres directement en utilisant les touches numériques de votre télécommande. • Entrez les lettres en sélectionnant chaque lettre à l’aide des touches ▲▼◄►, puis appuyez sur la touche E. Ensuite, sélectionnez Fait, puis appuyez sur la touche E. Le produit cherche un réseau. 6. L'écran indiquant l’échec de la connexion réseau s’affiche. Utilisez les touches ◄► pour sélectionner Param. IP, puis appuyez sur la touche E. 7. Sélectionnez le champ Param. IP, puis réglez-le à Entrer manuellement. 8. Sélectionnez une valeur de réseau à saisir (par exemple une adresse IP), puis appuyez sur la touche E. Utilisez les touches numériques de votre télécommande pour saisir les chiffres. Vous pouvez aussi saisir les valeurs en utilisant les touches ▲▼. Utilisez les touches ◄► de la télécommande pour passer d’un champ de saisie à un autre pour une valeur. Lorsque vous avez terminé, appuyez sur la touche E. Vous pouvez obtenir les valeurs du réseau de votre fournisseur de services Internet. 13. Ensuite, sélectionnez Fait à la droite de l’écran, puis appuyez sur la touche E. Le produit vérifie la connexion réseau, puis se branche au réseau. 14. Une fois que le cinéma maison a vérifié le réseau, sélectionnez OK, puis appuyez sur la touche E. | REMARQUE | Vous pouvez également lancer la configuration manuelle du réseau en allant à Paramètres > Réseau > État du réseau. WPS(PBC) L’un des moyens les plus faciles d’établir une connexion réseau sans fil est d’utiliser la fonction WPS(PBC). Si votre routeur sans fil dispose d’un touche WPS(PBC), exécutez les étapes suivantes : Après avoir suivi les étapes 1 à 3 de la section « Configuration de votre connexion réseau » à la page 25. 1. Dans l’écran Paramètres réseau, remplacez Type de réseau par Sans fil. Le produit cherche, puis affiche une liste de réseaux disponibles. 2. Faites défiler la liste vers le bas WPS (PBC), puis appuyez sur la touche E. 3. Dans les deux minutes suivantes, appuyez sur le touche WPS(PBC) de votre routeur. Votre produit acquiert automatiquement toutes les valeurs des paramètres réseau dont il a besoin pour se connecter à votre réseau. Le produit se connecte au réseau dès que la connexion réseau a été vérifiée. 4. Une fois terminé, sélectionnez OK, puis appuyez sur le touche E. | REMARQUE | Pour la connexion WPS, sélectionnez AES comme type de cryptage de sécurité du routeur sans fil. L’utilisation du cryptage de sécurité WEP ne permet pas de prendre en charge la connexion WPS. Français HT-F9730W_ZC_FRC-0814.indd 27 Définition des Paramètres 10. Répétez les étapes 8 et 9 jusqu’à ce que toutes les valeurs soient fournies. 04 Si vous avez une adresse IP statique ou si la procédure Automatique ne fonctionne pas, vous devrez définir manuellement les valeurs des paramètres réseau. Après avoir suivi les étapes 1 à 3 de la section « Configuration de votre connexion réseau » à la page 25. 27 | 2013-08-14 오후 1:11:51 Définition des Paramètres 3. Wi-Fi Direct La fonction Wi-Fi Direct vous permet de connecter les appareils Wi-Fi Direct au produit et entre eux à l’aide d’un réseau à entités homologues, sans utiliser de routeur sans fil. La fenêtre en incrustation de connexion apparaît, suivie par la fenêtre en incrustation Connecté. Lorsque celle-ci se ferme, l’appareil cité à l’écran Wi-Fi Direct devrait apparaître comme connecté. • Les procédures PBC et NIP connectent automatiquement les périphériques. | REMARQUE | Certains périphériques Wi-Fi pourraient ne pas prendre en charge la fonction AllShare s’ils sont branchés par l’intermédiaire de la fonction Wi-Fi Direct. Si tel est le cas, modifiez la méthode de connexion réseau utilisée pour connecter le périphérique au cinéma maison. Les transmissions Wi-Fi Direct peuvent interférer avec le signal Bluetooth. Avant d’utiliser la fonction Bluetooth, nous vous recommandons fortement de désactiver la fonction Wi-Fi Direct de tout appareil allumé. 1. Allumez l’appareil Wi-Fi Direct et activez la fonction Wi-Fi Direct. 2. À l'écran Accueil, sélectionnez Paramètres, puis appuyez sur le touche E. 3. Sélectionnez Réseau, puis appuyez sur le touche E. 4. Sélectionnez Wi-Fi Direct, puis appuyez sur le touche E. Les appareils Wi-Fi Direct que vous pouvez connecter s’affichent. Par l’intermédiaire du produit en utilisant la configuration par touches PBC 1. 2. Par l’intermédiaire du produit en utilisant un NIP 1. 2. 3. Wi-Fi Direct 4. Nom de l'app. : [HTS]F9730W Choisir l'appareil Wi-Fi Direct où vous connecter. AndroidXXXXXXX Sélectionnez l’appareil Wi-Fi Direct que vous souhaitez connecter à ce produit, puis appuyez sur la touche E. La fenêtre en incrustation de connexion apparaît, suivie par la fenêtre en incrustation Connecté. Lorsque celle-ci se ferme, l’appareil cité à l’écran Wi-Fi Direct devrait apparaître comme connecté. Déconnecté Sélectionnez l’appareil Wi-Fi Direct que vous souhaitez connecter à ce produit, puis appuyez sur la touche E. La fenêtre en incrustation NIP apparaît. Notez le code NIP qui figure dans la fenêtre en incrustation, puis entrez-le dans le champ approprié de l’appareil Wi-Fi Direct que vous voulez connecter. La fenêtre en incrustation de connexion apparaît, suivie par la fenêtre en incrustation Connecté. Lorsque celle-ci se ferme, l’appareil cité à l’écran Wi-Fi Direct devrait apparaître comme connecté. | REMARQUE | Rafraîchir Fermer 5. Il existe trois façons d’établir la connexion Wi-Fi : • Par l'appareil Wi-Fi. • Par l’intermédiaire du produit en utilisant la configuration par touches PBC. • Par l’intermédiaire du produit en utilisant un NIP. Chacune est expliquée ci-après. La connexion réseau câblée ou sans fil est déconnectée lorsque vous utilisez la fonction Wi-Fi Direct. Des fichiers texte, comme des fichiers portant une extension .TXT ou .DOC pourraient ne pas s’afficher lors de l’utilisation de la fonction Wi-Fi Direct. Mise à niveau logicielle Le menu Mise à jour logicielle vous permet de mettre à niveau le logiciel du produit pour améliorer la performance ou obtenir des services additionnels. • N’éteignez ou ne rallumez jamais le produit manuellement durant le processus de mise à niveau. Par l'appareil Wi-Fi 1. 2. Suivez la procédure indiquée sur l’appareil Wi-Fi afin d’établir la connexion à un autre appareil Wi-Fi Direct. Voir le guide d’utilisation de l’appareil pour consulter les instructions. Lorsque vous avez terminé la procédure, vous devriez voir une fenêtre en incrustation apparaître sur votre téléviseur, vous indiquant qu’un appareil prenant en charge Wi-Fi Direct a demandé à se connecter. Sélectionnez OK, puis appuyez sur la touche E pour accepter. | 28 Français HT-F9730W_ZC_FRC-0814.indd 28 1. 2. 3. 4. Dans le menu Accueil, sélectionnez Paramètres, puis appuyez sur la touche E. Sélectionnez Assistance, puis appuyez sur la touche E. Sélectionnez Mise à jour du logiciel, puis appuyez sur la touche E. Pour télécharger le logiciel de mise à jour et effectuer la mise à jour maintenant, sélectionnez Mettre à jour, puis appuyez sur la touche E. Consultez la rubrique « Mettre à jour maintenant » de cette page pour obtenir de l’information détaillée. 2013-08-14 오후 1:11:52 5. Mettre à jour maintenant Vous pouvez utiliser l’option Mettre à jour maintenant pour mettre le logiciel à jour par l’entremise de votre connexion réseau ou en utilisant une clé USB. Les directives relatives au réseau apparaissent ci-dessous. Les directives relatives à la clé USB sont présentées sur cette page. 1. Sélectionnez Mettre à jour, puis appuyez sur la touche E. Le message contextuel Mettre à jour maintenant s’affiche. 2. Le produit cherche la dernière version logicielle. 3. S’il ne trouve pas de mise à jour, le message contextuel "Aucune nouvelle mise à jour n’est disponible pour vous en ce moment." s'affiche. Appuyez sur la touche E pour quitter. 4. S’il trouve une nouvelle version, le message contextuel Demande de mise à jour s’affiche. 5. Sélectionnez OK. Le produit met le logiciel à niveau, s'éteint, puis se rallume automatiquement. 6. Si vous ne sélectionnez pas OK ou Annuler dans la minute qui suit, le produit stocke le nouveau logiciel de mise à niveau. Vous pouvez mettre le logiciel à niveau plus tard à l’aide de la fonction Mise à jour automatique. 7. Si vous sélectionnez Annuler, le produit annule la mise à niveau. | REMARQUE | Sélectionnez Activer ou Désactiver. Si vous sélectionnez Activer, le lecteur téléchargera automatiquement le nouveau logiciel de mise à niveau lorsqu'il sera en mode de mise à jour automatique et hors tension. S’il télécharge le nouveau logiciel de mise à niveau, le produit affiche un message vous demandant si vous souhaitez installer lorsqu'il sera allumé. | REMARQUE | Pour utiliser la fonction de mise à jour automatique, votre produit doit être connecté à Internet. Mettre à jour par USB 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Lorsque la mise à niveau du système est terminée, vérifiez les détails concernant le logiciel dans la section Information sur le produit de l’écran Communiquer avec Samsung. N’éteignez pas le produit pendant la mise à niveau du logiciel. Cela pourrait causer une défaillance du produit. Mise à jour automatique Vous pouvez définir la fonction Mise à jour automatique pour que le produit télécharge les nouveaux logiciels de mise à niveau lorsqu'il est en mode de mise à jour automatique. En mode de mise à jour automatique, le produit est éteint, mais la connexion à Internet est activée. Cela permet au produit de télécharger automatiquement le logiciel de mise à niveau pendant qu'il n'est pas utilisé. 1. Appuyez sur les touches ▲▼ pour sélectionner Mode de mise à jour automatique, puis appuyez sur la touche E. HT-F9730W_ZC_FRC-0814.indd 29 15. Définition des Paramètres | REMARQUE | La mise à niveau est terminée lorsque le produit s'éteint, puis se rallume automatiquement. Samsung Electronics n'assume aucune responsabilité légale en cas de défaillance du produit provoquée par une connexion Internet instable ou une négligence du consommateur pendant la mise à jour logicielle. Si vous souhaitez annuler la mise à niveau pendant le téléchargement du logiciel de mise à niveau, appuyez sur la touche E. Lorsque la mise à niveau du système est en cours, « MISE À JOUR » s’affiche sur le panneau avant. 2. 04 Pour autoriser le produit à télécharger automatiquement les mises à jour du logiciel disponibles, sélectionnez Mise à jour auto, et appuyez sur la touche E. Consultez la rubrique « Mise à jour automatique » de cette page pour obtenir de l’information détaillée. Visitez www.samsung.com. Cliquez sur SUPPORT dans le coin supérieur droit de la page. Saisissez le numéro de modèle du produit dans le champ de recherche. Pendant que vous entrez le numéro de modèle, un menu déroulant affiche des produits qui lui correspondent. À l’aide du bouton de gauche de la souris, cliquez sur le numéro de modèle du produit dans la liste déroulante. Sur la page qui s’affiche, déroulez le menu, puis cliquez sur Firmware Manuals & Downloads. Cliquez sur Firmware dans le centre de la page. Cliquez sur la touche ZIP dans la colonne Fichier du côté droit de la page. Dans la première fenêtre contextuelle qui s’affiche, cliquez sur Send Cliquez sur OK dans la deuxième fenêtre contextuelle pour télécharger et sauvegarder le fichier du micrologiciel sur votre ordinateur. Décompressez le fichier sur votre ordinateur. Vous devriez avoir un seul dossier portant le même nom que le fichier compressé. Copiez le dossier sur une clé USB. Assurez-vous que le produit ne contient pas de disque, puis insérez la clé USB dans le port USB du produit. Dans le menu du produit, allez à Paramètres > Assistance > Mise à jour du logiciel. Sélectionnez Mettre à jour. Le produit cherche la dernière version logicielle sur le support USB. S’il trouve le logiciel, le message contextuel Demande de mise à jour s’affiche. Sélectionnez OK. Le produit met le logiciel à niveau, s'éteint, puis se rallume automatiquement. | REMARQUE | Aucun disque ne devrait être inséré dans le produit lorsque vous mettez le logiciel à niveau au moyen de la prise USB. Lorsque la mise à niveau du système est terminée, vérifiez les détails concernant le logiciel dans la section Information sur le produit de l’écran Communiquer avec Samsung. N’éteignez pas le produit pendant la mise à jour logicielle. Cela pourrait causer une défaillance du produit. Les mises à niveau du logiciel au moyen de la prise USB doivent être exécutées avec une clé USB uniquement. Français 29 | 2013-08-14 오후 1:11:53 Diffuseur de Médias Votre cinéma maison peut lire le contenu stocké sur des disques Blu-ray/DVD/CD, des périphériques USB, des ordinateurs, des téléphones intelligents, des tablettes et Internet. Pour lire du contenu stocké sur votre ordinateur ou un appareil mobile, vous devez brancher l’ordinateur ou l'appareil mobile et le produit à votre réseau. Pour lire le contenu stocké sur votre ordinateur, vous devez aussi télécharger et installer le logiciel réseau AllShare ou disposez du logiciel réseau DLNA sur votre ordinateur. Méthode 1 1. Allumez le produit. 2. Connectez le périphérique USB au port USB situé sur le panneau avant du produit. Le message p p q connecté s’affiche. contextuel Nouveau périphérique Films et de émissions d télévision. | REMARQUE | Les ordinateurs tournant sous Windows 7 et Windows Applications Nouv. app. con. Pho Photos, vidéos et m musique Disque flash USB Photos 8 disposent du logiciel DLNA (Play To). Vidéos Musique Tout le contenu L’écran Tout le contenu Pour tous les supports, l’écran Tout le contenu ou l’un des écrans secondaires est votre moyen principal pour accéder à du contenu enregistré sur divers périphériques et le lire par connexion directe ou par le réseau. Ajouter une Ajouter une Ajouter une application application application Navigateur Web Paramètres | REMARQUE | Utilisation de l’écran Tout le contenu Si le message ne s’affiche pas, allez à la méthode 2. Pour accéder à l’écran Tout le contenu, sélectionnez Photos, Vidéos et Musique sur l’écran Accueil, puis appuyez sur la touche E. 3. Lecture de disques commerciaux 1. Appuyez sur la touche ^ pour ouvrir le tiroir disque. 2. Placez délicatement un disque sur le plateau, avec l’étiquette du disque sur le dessus. Utilisez les touches ▲▼ pour sélectionner Photos, Vidéos, Musique ou Tout le contenu, puis appuyez sur la touche E. Selon la disposition du contenu, vous verrez soit des dossiers, des fichiers individuels ou les deux. | REMARQUE | Même si le produit peut afficher des dossiers pour 4. 5. 3. Appuyez sur la touche ^ pour fermer le tiroir disque. La lecture commence automatiquement. 6. 4. Si la lecture ne démarre pas automatiquement, appuyez sur la touche 6 de la télécommande ou consultez la rubrique «L’écran Tout le contenu » cidessus. 7. tous les types de contenu, il affichera seulement les fichiers correspondant au type de contenu sélectionné à l’étape 3. Par exemple, si vous avez sélectionné Musique, seuls les fichiers musicaux seront visibles. Vous pouvez modifier cette sélection en retournant à l’écran Photos, vidéos et musique, puis passer à l’étape 4 de la méthode 2 décrite ci-dessous. Au besoin, utilisez les touches ▲▼◄► pour sélectionner un dossier, puis appuyez sur la touche E. Sélectionnez un fichier pour l’afficher ou le lire, puis appuyez sur la touche E. Appuyez sur la touche RETURN pour quitter un dossier ou la touche Quitter pour retourner à l’écran Accueil. Allez aux pages 32 à 40 pour obtenir des instructions qui expliquent comment contrôler la lecture de vidéos, de fichiers de musique et de photos sur un périphérique USB. Lecture des fichiers sur un périphérique USB Vous pouvez utiliser deux méthodes pour lire et afficher les fichiers multimédias situés sur un périphérique USB au moyen de votre produit. | 30 Français HT-F9730W_ZC_FRC-0814.indd 30 2013-08-14 오후 1:11:54 Méthode 2 2. Connectez le périphérique USB au port USB situé sur le panneau avant du produit. 3. Sélectionnez Photos, vidéos et musique sur l’écran Accueil, puis appuyez sur la touche E. 4. Sélectionnez Photos,Vidéos, Musique ou Tout le contenu, puis appuyez sur la touche E. Selon la disposition des contenus, vous verrez soit des dossiers, des fichiers individuels ou les deux. | REMARQUE | Même si le produit peut afficher des dossiers pour tous les types de contenu, il affichera seulement les fichiers correspondant au type de contenu sélectionné à l’étape 2. Par exemple, si vous avez sélectionné Musique, seuls les fichiers musicaux seront visibles. Vous pouvez changer cette sélection en retournant à l’écran Photos, vidéos et musique et en répétant l’étape 2. 3. Un écran s'affiche énumérant le contenu du disque. Selon la disposition des contenus, vous verrez soit des dossiers, des fichiers individuels ou les deux. 4. Au besoin, utilisez les touches ▲▼◄► pour sélectionner un dossier, puis appuyez sur la touche E. 5. Utilisez les touches ▲▼◄► pour sélectionner un fichier pour l’afficher ou le lire, puis appuyez sur la touche E. 6. Appuyez sur la touche RETURN une ou plusieurs fois pour quitter un écran en cours d'utilisation, quitter un dossier ou retourner à l'écran Accueil. Appuyez sur la touche Quitter pour retourner directement à l’écran Accueil. 7. Allez aux pages 32 à 40 pour obtenir des instructions qui expliquent comment contrôler la lecture de vidéos, de fichiers de musique et de photos sur un disque. Même si le produit peut afficher des dossiers pour 5. 6. 7. 8. tous les types de contenu, il affichera seulement les fichiers correspondant au type de contenu sélectionné à l’étape 4. Par exemple, si vous avez sélectionné Musique, seuls les fichiers musicaux seront visibles. Vous pouvez changer cette sélection en retournant à l’écran Photos, vidéos et musique et en répétant l’étape 4. Utilisez les touches ◄► pour sélectionner le périphérique désiré, puis appuyez sur la touche E. Au besoin, utilisez les touches ▲▼◄► pour sélectionner un dossier, puis appuyez sur la touche E. Appuyez sur la touche RETURN pour quitter un dossier ou la touche Quitter pour retourner à l’écran Accueil. Allez aux pages 32 à 40 pour obtenir des instructions qui expliquent comment contrôler la lecture de vidéos, de fichiers de musique et de photos sur un périphérique USB. | REMARQUE | Si vous insérez un disque pendant la lecture du contenu d’un périphérique de stockage USB ou d’un téléphone, le mode du périphérique passe automatiquement à « Disque ». Si votre téléphone cellulaire est compatible DLNA, vous pouvez lire le contenu sans être branché à un câble USB. Consultez la rubrique « Utilisation de la fonction réseau AllShare » à la page 31. Lecture d’un disque contenant des données enregistrées par l’utilisateur Vous pouvez lire des fichiers multimédias que vous avez enregistrés sur des disques Blu-ray, DVD ou CD. 1. Placez un disque enregistré par un utilisateur dans le tiroir disque, avec l’étiquette du disque sur le dessus, puis fermez le tiroir disque. Le message contextuel Périphérique connecté s’affiche. 2. Utilisez les touches ▲▼ pour sélectionner le type de contenu que vous désirez afficher ou lire - Photos, Vidéos, Musique - puis appuyez sur la touche E. Utilisation de la fonction réseau AllShare AllShare autorise la lecture des photos, des vidéos et de la musique stockées sur votre PC ou votre appareil compatible avec la norme DLNA, par l’intermédiaire du produit, au moyen d’une connexion réseau sans fil. Téléchargement de l'application AllShare AllShare permet d'importer et de lire des fichiers média stockés sur un ordinateur ou un appareil compatible DLNA. Toutefois, il faut installer AllShare PC sur l'ordinateur, et les appareils portables doivent prendre en charge AllShare. Pour de plus amples renseignements, visitez le portail de service de Samsung portant sur le contenu (http://link.samsung.com). | REMARQUE | Il se peut que des problèmes de compatibilité surviennent lorsque vous essayez de lire des fichiers média par l'intermédiaire du serveur DLNA d'un tiers. Français HT-F9730W_ZC_FRC-0814.indd 31 Diffuseur de Médias Allumez le produit. 05 1. | REMARQUE | 31 | 2013-08-14 오후 1:11:57 Diffuseur de Médias Lecture du contenu situé sur votre PC ou sur votre appareil DLNA par l’intermédiaire du produit 1. Branchez le produit, votre ordinateur et votre téléphone cellulaire compatible DLNA au même réseau sans fil. 2. Suivez les directives du manuel d'installation et d'utilisation de l'application AllShare pour configurer les périphériques et les fichiers média. 3. Application AllShare ouverte sur votre ordinateur, confirmez la connexion de votre téléphone. 4. Sur le téléphone, sélectionnez le fichier que vous désirez afficher ou lire, puis sélectionnez le système de cinéma maison à utiliser comme périphérique de lecture. 5. Sur le téléphone, démarrez la lecture. Ordinateur Produit Lecture des fichiers de l'ordinateur Connexion AllShare 1. Branchez le produit, votre ordinateur et/ou le téléphone cellulaire compatible DLNA au même réseau sans fil. 2. Suivez les directives du manuel d'installation et d'utilisation de l'application AllShare pour configurer les périphériques et les fichiers média. 3. Sélectionnez Photos, vidéos et musique sur l’écran d’accueil du produit, puis appuyez sur la touche E. L'écran Photos, vidéos et musique apparaît. 4. Sélectionnez le type de contenu que vous désirez lire - Photos, Vidéos, Musique, ou Tout le contenu - puis appuyez sur la touche E. 5. Sur le prochain écran, sélectionnez AllShare, puis appuyez sur la touche E. 6. Dans la liste des périphériques AllShare connectés qui s’affiche, sélectionnez votre ordinateur ou un autre périphérique compatible AllShare, puis appuyez sur la touche E. Un écran énumérant les fichiers disponibles s'affiche. 7. Commande de la lecture des vidéos Vous pouvez contrôler la lecture du contenu vidéo situé sur un disque Blu-ray/DVD, un périphérique USB, un appareil mobile ou un ordinateur. Selon le disque ou les contenus, certaines des fonctions décrites dans ce guide pourraient ne pas être disponibles. Touches de la télécommande utilisées pour la lecture des vidéos DISC MENU Ordinateur FULL SCREEN HOME REPEAT 3 1 Utilisation du menu Disque, du menu Titre, du menu Incrustation et de la liste des titres DISC MENU Pendant la lecture, appuyez sur cette touche pour afficher le menu Disque. TITLE MENU Pendant la lecture, appuyez sur cette touche pour afficher le menu Titres. • Si votre disque comporte une liste d’écoute, appuyez la touche Afficher pour aller à la liste d’écoute. POPUP MENU Pendant la lecture, appuyez sur cette touche pour afficher le menu Incrustation. Connexion AllShare Commande des fichiers du PC au produit Téléphone intelligent 1 MUTE Produit Liecchtiuerres ddee s l'ordinateur POPUP 2 Sélectionnez le fichier que vous désirez afficher ou lire, puis appuyez sur la touche E. Contrôle de la lecture de contenus stockés dans l'ordinateur à partir de votre téléphone intelligent TITLE MENU 0 (Cette fonction n’est disponible que sur les téléphones Samsung compatibles AllShare.) | 32 Français HT-F9730W_ZC_FRC-0814.indd 32 2013-08-14 오후 1:11:59 Lance la lecture. 5 Arrête la lecture. 7 Interrompt la lecture. Lecture accélérée Pendant la lecture, appuyez sur la touche 3 ou . Chaque fois que vous appuyez sur la touche 3 ou la vitesse de lecture change. Lecture au ralenti En mode Pause, appuyez sur la touche . Chaque fois que vous appuyez sur la touche , la vitesse de lecture change. Lecture image par image En mode Pause, appuyez sur la touche 7. Chaque fois que vous appuyez sur la touche 7, une nouvelle image apparaît. Saut de lecture Pendant la lecture, appuyez sur la touche 1 ou 2. Chaque fois que vous appuyez sur la touche 1 ou 2, le disque passe au chapitre ou au fichier précédent ou suivant. 3 Répéter la lecture 1. 2. Selon le disque, l’écran pourrait ne pas afficher toutes les options de répétition. L’écran pourrait ne pas afficher Chapitre ou Titre immédiatement. Continuez d’appuyer sur les touches ▲▼ jusqu’à ce que votre choix apparaisse dans le champ applicable. Pour retourner au mode de lecture normale, appuyez de nouveau sur la touche REPEAT, sur les touches ▲▼ pour sélectionner Désac., puis sur la touche E. L’écran pourrait ne pas afficher immédiatement Répéter A-B. Continuez d’appuyer sur les touches ▲▼ jusqu’à ce Répéter A-B apparaisse dans le champ applicable. Vous devez définir le point (B) à 5 secondes au moins après le point (A). Utilisation du menu OUTILS Pendant la lecture, appuyez sur la touche TOOLS. Lecture du début 3D 2. 3. 4. | REMARQUE | Utilisez le menu 3D seulement pour le contenu 3D du format côte à côté ou haut/bas. S’il est appliqué au contenu 2D, il pourrait ne pas s’afficher adéquatement. Pendant la lecture, appuyez sur la touche REPEAT de votre télécommande. Appuyez sur les touches ▲▼ pour sélectionner un Désac., Titre, Chapitre, Tout ou Répéter A-B puis appuyez sur la touche E. Appuyez sur la touche E au point où vous souhaitez que la répétition de la lecture commence (A). Appuyez sur la touche E au point où vous souhaitez que la répétition de la lecture s'arrête (B). Pour revenir à la lecture normale, appuyez de nouveau sur la touche REPEAT. Appuyez sur la touche E. Sélectionnez pour retourner au début du film, puis appuyez sur la touche E. Utilisez le menu 3D pour sélectionner l’option Côte à côte ou De haut en bas si le contenu 3D en cours de lecture ne s’affiche pas correctement en mode 3D. Vous pouvez utiliser la fonction Recherche de scène durant la lecture pour visionner une scène de votre choix ou lancer la scène à partir d'une scène de votre choix. Répéter A-B 1. Recherche de scène | REMARQUE | Si l'information sur l'index du fichier est corrompue ou si le fichier ne prend pas en charge l'indexation, vous ne pourrez pas utiliser la fonction Recherche de scène. Si vous utilisez la fonction DLNA après la connexion à un ordinateur par l'intermédiaire de votre réseau. Il se peut que la fonction Recherche de scène ne soit pas prise en charge. Français HT-F9730W_ZC_FRC-0814.indd 33 Diffuseur de Médias 6 | REMARQUE | 05 2 Touches liées à la lecture Le produit n'émet aucun son en mode Recherche, Ralenti ou Image par image. • Pour revenir à la vitesse de lecture normale, appuyez sur la touche 6. 33 | 2013-08-14 오후 1:12:05 Diffuseur de Médias | REMARQUE | Vous devez définissez le point (B) avant que 5 secondes de lecture se soient écoulées après le point (A). Sélectionnez cette option pour lancer un titre différent si le disque ou le périphérique comporte plus d'un film. Recherche de titres 1. 2. Sélectionnez Recherche de titres, puis appuyez sur la touche E. Utilisez les touches ▲▼ pour sélectionner un titre, puis appuyez sur la touche E. Sélectionnez pour lire le chapitre de votre choix. 1. Recherche de chapitre 2. Sélectionnez Recherche de chapitre, puis appuyez sur la touche E. Utilisez les touches ▲▼ pour sélectionner un chapitre, puis appuyez sur la touche E. Mode image Sélectionnez pour lancer la lecture du film à une heure précise. 1. 2. Barre de rech. de temps Sélectionnez Barre de rech. de temps, puis appuyez sur la touche E. À l’aide des touches numériques, saisissez l'heure désirée, puis appuyez sur la touche E. | REMARQUE | Vous pouvez aussi utiliser les touches ◄► pour avancer ou reculer dans la lecture du film. Le film avance ou recule par saut d'une minute à chaque pression d'une des touches ◄ ►. Mode de répétition Sélectionnez pour répéter un titre, un chapitre ou une section spécifique. - Désac. : Sélectionnez pour retourner à une lecture normale. - Titre : Choisissez pour répéter un titre sélectionné. - Chapitre : Choisissez pour répéter un chapitre spécifique. - Répéter A-B : Choisissez pour répéter une section spécifique. Sélectionnez pour définir le mode d’image. - Dynamique : Augmente la netteté et le contraste. - Standard : Choisissez ce réglage pour la plupart des applications de visionnement. - Cinéma : Il s’agit du meilleur réglage pour regarder des films. - Utilisateur : Vous permet de régler la fonction de netteté et de réduction du bruit, respectivement. | REMARQUE | Lorsque vous utilisez la fonction BD Wise, ce menu n'apparaît pas. Mode égaliseur Sélectionnez pour utiliser l’égaliseur. Sélectionnez pour configurer l’égaliseur. Paramètres égaliseur Audio | REMARQUE | N’apparaît que lorsque le monde Égaliseur est activé. Sélectionnez pour définir la langue audio souhaitée. Sync. audio Dans certains cas où le produit est connecté à un téléviseur numérique, le signal audio pourrait ne pas être synchronisé avec le signal vidéo. Si cela se produit, réglez le décalage du son de façon à ce qu’il corresponde au signal vidéo. Sous-titre Sélectionnez pour définir la langue souhaitée des sous-titres. - Vous pouvez aussi utiliser cette fonction en appuyant sur la touche SUBTITLE de la télécommande. 1. Appuyez sur les touches ▲▼ pour sélectionner Répéter A-B, puis sur la touche E. Paramètres s-t 2. Appuyez sur la touche E au point où vous souhaitez que la répétition de la lecture commence (A). Laissez le film jouer. Angle 3. Appuyez sur la touche E au point où vous souhaitez que la répétition de la lecture arrête (B). Vidéo BONUSVIEW Audio BONUSVIEW Pour sélectionner les options de sous-titres désirées. Pour visionner une scène sous un autre angle. L’option Angle affiche le nombre d’angles sous lesquels il est possible de visionner (1/1, 1/2, 1/3, etc.). Sélectionnez pour définir l’option Bonusview souhaitée. | 34 Français HT-F9730W_ZC_FRC-0814.indd 34 2013-08-14 오후 1:12:06 Information Sélectionnez pour afficher l’information de fichiers vidéo. | REMARQUE | Selon le disque ou le support d’enregistrement utilisé, le menu Outils pourrait différer. Les fichiers vidéo qui ont un débit binaire élevé de 20 Mbit/s ou plus altèrent la capacité des fonctionnalités du produit et pourraient s'arrêter en cours de lecture. Utilisation des menus Afficher et Options Sur l’écran qui énumère les fichiers vidéo, utilisez les touches ▲▼◄► pour sélectionner Afficher ou Options dans le coin supérieur droit, puis appuyez sur la touche E. Commande de la lecture de la musique Vous pouvez commander la lecture du contenu musical situé sur un DVD, un périphérique USB, un appareil mobile ou un ordinateur. Selon le disque ou les contenus, certaines des fonctions décrites dans ce guide pourraient ne pas être disponibles. Touches de la télécommande utilisées pour la lecture de la musique 1 1 2 3 4 5 6 7 8 DISC MENU 9 TITLE MENU 0 POPUP 4 Vidéos Date Affiche tous les dossiers contenant des vidéos par date. Si vous sélectionnez un dossier puis appuyez sur la touche E, tous les vidéos du dossier s’affichent par date. Titre Affiche tous les fichiers vidéo sur le support ou le périphérique de stockage par titre. Dossier Affiche tous les dossiers sur le support ou le périphérique de stockage. Afficher Lire sélection Options Envoyer La fonction Lire le contenu sélectionné vous permet de créer une liste de lecture en sélectionnant les fichiers spécifiques à lire. Cela fonctionne de la même façon pour tous les supports. Consultez la rubrique Création d’une liste de lecture à partir d’un CD à la page 37. Sélectionnez Envoyer pour télécharger les fichiers sélectionnés vers les applications (Picasa, Facebook, etc.) ou les périphériques. Pour utiliser Envoyer, vous devez créer un compte sur le site en ligne, puis vous connecter en utilisant la fonction de connexion. | REMARQUE | Selon le disque ou le périphérique de stockage, le menu Options pourrait différer. Toutes les options pourraient ne pas s'afficher. Les menus Afficher et Options sont habituellement accessibles lorsque vous visionnez des fichiers de vidéos sur une clé USB, un ordinateur, un disque que vous avez enregistré ou un appareil mobile. Ils ne sont habituellement pas accessibles si vous visionnez un disque Blu-ray, DVD ou CD commercial. HT-F9730W_ZC_FRC-0814.indd 35 2 3 Diffuseur de Médias Sélectionnez cette option pour définir la taille de l’image vidéo. Choisissez Original, Mode1 (plus grand), ou Mode2 (le plus grand). 05 Plein écran 5 6 MUTE 1 Touches NUMBER : Si les pistes numérotées sont affichées, appuyez sur le numéro d’une piste. La piste sélectionnée est lue. 2 Touches 1 2 : Pour passer à la piste précédente/suivante. 3 Touche 5 : Arrête la lecture d'une piste musicale. 4 Lecture accélérée (CD audio [CD-DA]) uniquement : Pendant la lecture, appuyez sur la touche 3 ou . Chaque fois que vous appuyez sur la touche 3 ou , la vitesse de lecture change. 5 Touche 7 : Interrompt la lecture d'une piste. 6 Touche 6 : Lit la piste musicale actuellement sélectionnée. Commandes de l’écran Music Options PISTE 001 00:09 00:43 off off PISTE 001 00:43 PISTE 002 03:56 PISTE 003 04:41 PISTE 004 04:02 PISTE 005 03:43 PISTE 006 03:40 PISTE 007 04:06 PISTE 008 03:52 PISTE 009 03:04 PISTE 010 04:02 Français 35 | 2013-08-14 오후 1:12:06 Diffuseur de Médias Interrompre la lecture de la piste musicale. Lire sélection La fonction Lire le contenu sélectionné vous permet de créer une liste de lecture en sélectionnant les fichiers spécifiques à lire. Cela fonctionne de la même façon pour tous les supports. Voir la rubrique Répétition des pistes sur un CD audio à la page 37. Envoyer Sélectionnez Envoyer tpour télécharger les fichiers sélectionnés vers les applications (Picasa, Facebook, etc.) ou les périphériques. Pour utiliser Send, vous devez créer un compte sur le site en ligne, puis vous connecter en utilisant la fonction de connexion. Extraction La fonction Extraction convertit le CD audio en format mp3 et enregistre les fichiers convertis sur un périphérique USB ou un appareil mobile branché au produit. Voir la rubrique Extraction à la page 37. Information Sélectionnez pour visionner l’information (contenus). Encodage Sélectionnez pour gérer les options d’encodage de texte. Lire une piste musicale. Pour passer à la piste précédente. Pour passer à la piste suivante. Pour revenir en arrière dans la piste. Pour avancer dans la piste. Répéter une ou toutes les pistes musicales. , 1 Lire les pistes musicales dans l’ordre aléatoire. Afficher l’égaliseur. Options Régler manuellement l’égaliseur. (Uniquement lorsque le mode de l’égaliseur est Activ.) Pour accéder aux commandes, lancez la lecture d’une piste, puis utilisez les touches ▲▼◄► pour vous déplacer vers la commande de votre choix. | REMARQUE | Les commandes de l’écran Musique sont également accessibles pendant la lecture d’une piste musicale. Toutes les commandes n’apparaissent pas en même temps. Utilisation des menus Afficher et Options Sur l’écran qui énumère les fichiers de musique, utilisez les touches ▲▼◄► pour sélectionne Afficher ou Options dans le coin supérieur droit, puis appuyez sur la touche E. Musique Afficher Piste Affiche toutes les pistes musicales sur le support ou le périphérique de stockage. Album Affiche tous les fichiers de musique sur le support ou le périphérique de stockage par album. Artiste Affiche tous les fichiers de musique sur le support ou le périphérique de stockage par artiste. Genre Affiche tous les fichiers de musique sur le support ou le périphérique de stockage par genre. Dossier Affiche tous les dossiers sur le support ou le périphérique de stockage. | REMARQUE | Selon le disque ou le périphérique de stockage, le menu Options pourrait différer. Toutes les options pourraient ne pas s'afficher. Répétition des pistes musicales d’un CD audio Vous pouvez configurer le produit pour qu’il répète les pistes musicales comprises sur un CD audio (CD-DA/ MP3). 1. Durant la lecture, utilisez les touches ▲▼◄► pour dans le coin inférieur gauche de sélectionner l’écran, puis appuyez sur la touche E. 2. Utilisez les touches ▲▼ pour sélectionner le mode de répétition désiré - Désactiver, 1 chanson ou Tous, puis appuyez sur la touche E. | 36 Français HT-F9730W_ZC_FRC-0814.indd 36 2013-08-14 오후 1:12:10 ~ Utilisez l’option Désélectionner tout pour 00:09 00:43 off off 00:43 PISTE 002 03:56 PISTE 003 04:41 PISTE 004 04:02 PISTE 005 03:43 PISTE 006 03:40 PISTE 007 04:06 PISTE 008 03:52 PISTE 009 03:04 PISTE 010 04:02 Diffuseur de Médias PISTE 001 PISTE 001 05 décocher toutes les pistes sélectionnées en même temps. Sélectionnez ensuite des pistes individuelles ou utilisez Tout sélectionner pour sélectionner toutes les pistes, puis appuyez sur la touche RETURN de votre télécommande ou sélectionnez Lecture et appuyez sur la touche E. Si vous n’utilisez pas Tout sélectionner ou si vous sélectionnez des pistes individuelles, la liste de lecture ne sera pas modifiée. ~ Annuler annule tous les changements que vous avez effectués à l’écran Lire sélection. Lorsque vous revenez à l’écran Lecture, la Liste d’écoute sera inchangée. Options Extraction Lecture aléatoire des pistes musicales d’un CD audio 1. 2. Vous pouvez configurer le produit pour qu’il lise les pistes musicales comprises sur un CD audio (CD-DA/MP3) dans l’ordre aléatoire. 1. Durant la lecture, utilisez les touches ▲▼◄► pour dans le coin inférieur gauche de sélectionner l’écran, puis appuyez sur la touche E. 2. Utilisez les touches ▲▼ pour régler le mode aléatoire à Désactiver ou Activer, puis appuyez sur la touche E. 5. Création d’une liste de lectures à partir d’un CD 6. 1. 2. 3. 4. 5. 6. Pendant que l’écran de lecture est affiché, sélectionnez la touche Options, puis appuyez sur la touche E. Le menu Options s'affiche. Utilisez les touches pour sélectionner Lire sélection, puis appuyez sur la touche E. L'écran Lire sélection apparaît. Utilisez les touches ▲▼ pour sélectionner une piste musicale, puis appuyez sur la touche E. La piste musicale est cochée à gauche. Répétez l’étape 3 pour sélectionner et cocher d'autres pistes musicales. Pour retirer une piste musicale de la liste, allez à la piste et appuyez de nouveau sur la touche E. La piste musicale n’est plus cochée. Ensuite, utilisez la touche pour sélectionner Lecture, puis appuyez sur la touche E. L’écran Lecture de musique réapparaît et fournit la liste des seules pistes musicales que vous avez cochées. Les pistes musicales cochées sont lues automatiquement. | REMARQUE | Vous pouvez créer une liste d'écoute contenant jusqu'à 99 pistes sur des CD audio (CD-DA). Si vous avez créé une liste de lecture, Lire sélection est remplacé par Modifier la liste de lecture. Depuis l’écran Lire sélection, vous pouvez aussi choisir Choisir tout, Désélectionner tout, et Annuler. ~ Utilisez Choisir tout pour sélectionner toutes les pistes. Cela annule vos sélections de pistes musicales individuelles. Lorsque vous appuyez sur la touche RETURN de votre télécommande ou lorsque vous sélectionnez la touche Lecture puis que vous appuyez sur la touche E, toutes les pistes apparaissent à l’écran Lecture de musique et le produit commence à lire toutes les pistes musicales depuis la piste 001. 3. 4. 7. 8. Insérez un périphérique USB dans la prise USB située à l’avant du produit. Pendant que l’écran de lecture est affiché, sélectionnez la touche Options, puis appuyez sur la touche E. Le menu Options s'affiche. Utilisez les touches ▲▼ pour sélectionner Extraction, puis appuyez sur la touche E. L'écran Extraction apparaît. Utilisez les touches ▲▼ pour sélectionner un chapitre, puis appuyez sur la touche E. Une coche apparaît à la gauche de la piste. Répétez l’étape 4 pour sélectionner et cocher d'autres pistes musicales. Pour retirer une piste musicale de la liste, allez à la piste et appuyez de nouveau sur la touche E. La piste musicale n’est plus cochée. Ensuite, sélectionnez la touche Ext à l’aide des touches ▲▼, puis appuyez sur la touche E. La fenêtre en incrustation Extraire apparaît. Utilisez les touches ▲▼ pour sélectionner le périphérique à utiliser pour stocker le fichier d’extraction, puis appuyez sur la touche E. | REMARQUE | Ne débranchez pas le périphérique pendant l’extraction. 9. Si vous souhaitez annuler l’extraction, appuyez sur la touche E et sélectionnez Oui. Sélectionnez Non pour continuer l’extraction. 10. Une fois l’extraction complétée, le message « Extraction réussie. » apparaît. Appuyez sur la touche E. 11. Appuyez sur le touche RETURN pour revenir à l’écran Lecture. | REMARQUE | Cette fonction est seulement disponible pour les CD audio DTS. Cette fonction pourrait ne pas être prise en charge par certains disques. L’extraction encode la musique en format .mp3 à 192 kb/s. Depuis l’écran Extraction, vous pouvez aussi choisir Choisir tout et Effacer tout. - Utilisez Choisir tout pour sélectionner toutes les pistes et appuyez sur la touche E. Ceci annule votre sélection individuelle. - Utilisez Effacer tout pour désélectionner toutes les pistes sélectionnées en même temps. Français HT-F9730W_ZC_FRC-0814.indd 37 37 | 2013-08-14 오후 1:12:11 Diffuseur de Médias Utilisation du Bluetooth Vous pouvez utiliser un dispositif Bluetooth pour écouter de la musique en son stéréo de haute qualité, tout cela sans fil! 1. Appuyez sur la touche FUNCTION de la télécommande du produit pour afficher le message BT. 2. Sélectionnez le menu Bluetooth sur le dispositif Bluetooth que vous désirez connecter. Pour des directives, consultez le guide de l’utilisateur du dispositif Bluetooth. Sélectionner le menu Casque d’écoute stéréo du dispositif Bluetooth. • Une liste de périphériques apparaîtra Sélectionnez « [HTS]Fxxxxx » dans la liste cherchée. • Lorsque le cinéma maison est branché au dispositif Bluetooth, le nom du dispositif Bluetooth branché s’affiche sur la face avant du cinéma maison, suivi par le nom du cinéma maison. Écoutez de la musique sur un appareil branché. • Vous pouvez écouter de la musique sur un dispositif Bluetooth branché au moyen du système de cinéma maison. Qu’est-ce que le Bluetooth? Bluetooth est une technologie qui permet à des périphériques compatibles Bluetooth de se connecter facilement entre eux en utilisant une connexion sans fil courte. • Un dispositif Bluetooth pourrait être une source de bruit ou mal fonctionner : - Lorsqu’une partie du corps est en contact avec le système de réception/transmission du dispositif Bluetooth ou du cinéma maison. - S’il est soumis à des variations électriques dans les obstructions causées par un mur, un coin ou des partitions dans les bureaux. - S’il est exposé à de l’interférence électrique provenant d’appareils exploitant des bandes de fréquence notamment de l’équipement médical, des fours à micro-ondes et des réseaux locaux sans fil. • Appariez le cinéma maison avec le dispositif Bluetooth pendant qu’ils sont près l’un de l’autre. • Plus la distance est grande entre le cinéma maison et le dispositif Bluetooth, plus la qualité se dégrade. Si la distance dépasse la portée opérationnelle du Bluetooth, la connexion est perdue. • Dans les zones où la réception est mauvaise, la connexion Bluetooth pourrait ne pas fonctionner correctement. • Le cinéma maison dispose d’une portée de réception effective allant jusqu’à 10 mètres (32,8 pieds) dans toutes les directions s’il n’y a aucun obstacle. La connexion sera automatiquement coupée si le dispositif est hors de portée. Même à l’intérieur de cette portée, la qualité du son peut être détériorée par des obstacles comme des murs et des portes. • Ce périphérique sans fil peut causer de l’interférence électrique lors de son fonctionnement. Pour brancher le cinéma maison à un dispositif Bluetooth Brancher 3. 4. 5. | REMARQUE | Le cinéma maison prend en charge des données SBC de qualité moyenne (jusqu’à 237 kbps@48 kHz), mais pas des données SBC de haute qualité (328 kbps@44,1kHz). La fonction AVRCP est prise en charge. Sa fonction variera selon les spécifications du périphérique branché. Branchez seulement un dispositif Bluetooth qui prend en charge le profil A2DP. Un seul appareil peut être apparié à la fois. Les fonctions de recherche ou de connexion pourraient ne pas s’effectuer correctement dans les cas suivants : - Si un champ électrique puissant est émis près ou autour du cinéma maison. - Si plusieurs appareils sont simultanément appariés au produit. - Si le dispositif Bluetooth est éteint, pas en place ou défaillant. - Veuillez noter que des appareils comme des fours micro-ondes, des adaptateurs de réseau local sans fil, des ampoules au plasma et des cuisinières au gaz utilisent la même plage de fréquences qu'un dispositif Bluetooth ce qui peut causer une interférence électrique. Pour débrancher le dispositif Bluetooth du cinéma maison Dispositif Bluetooth Assurez-vous que le dispositif Bluetooth prend en charge la fonction d’oreillette stéréo Bluetooth. Vous pouvez débrancher le cinéma maison du dispositif Bluetooth. (reportez-vous au guide d’utilisation du dispositif Bluetooth) • Lorsque le cinéma maison est débranché du dispositif Bluetooth, le cinéma maison affiche la mention DISCONNECTED sur l’écran avant. | 38 Français HT-F9730W_ZC_FRC-0814.indd 38 2013-08-14 오후 1:12:13 Pour débrancher le cinéma maison du Une fois le nouvel appariement terminé, le message REMOTE PAIRED s’affiche sur l’écran avant. dispositif Bluetooth MANUAL L’utilisation de l’appariement NFC vous permet de facilement connecter votre cinéma maison à un appareil source Bluetooth compatible avec la technologie NFC pour écouter de la musique. Appariement initial Pour apparier les appareils NFC avec votre cinéma maison, vous devez d’abord apparier la télécommande et le cinéma maison. L’appariement s’effectue automatiquement si vous appuyez sur une touche de la télécommande après la première mise en fonction du cinéma maison. Une fois l’appariement terminé, le message REMOTE PAIRED s’affiche sur l’écran avant en moins de 20 secondes. SUBTITLE SOUND EFFECT Appariement d’un appareil NFC avec le cinéma maison 1. Allumez l’appareil Bluetooth compatible avec la technologie NFC et assurez-vous que l’écran est déverrouillé. • L’appariement NFC de l’appareil ne fonctionnera pas si l’option de verrouillage de l’écran est activée. 2. Touchez doucement le sur l’arrière de la télécommande du cinéma maison avec le périphérique Bluetooth compatible avec la technologie NFC. En mode de connexion Bluetooth, la connexion Utilisation de la technologie NFC (Near Field Communication) AUDIO PRESET Diffuseur de Médias HUB | REMARQUE | Bluetooth sera perdue si la distance entre le système de cinéma maison et le dispositif Bluetooth dépasse 32,8 pieds. Lorsque le dispositif Bluetooth retourne dans la zone de portée efficace ou si vous redémarrez le dispositif Bluetooth, vous devez apparier de nouveau le dispositif et le cinéma maison pour rétablir la connexion. En mode Bluetooth, l’économiseur d’écran se mettra en marche si le dispositif Bluetooth reste en état de fonctionner pendant cinq minutes. Pour reconnecter le dispositif Bluetooth, éteignez l’économiseur d’écran et branchez-le. Pour désactiver l’économiseur d’écran, appuyez sur n’importe quelle touche de la télécommande (la touche de volume, une touche numérique, etc.) SEARCH S/W LEVEL 3D SOUND 05 SMART Appuyez sur la touche ( ) sur le panneau avant du cinéma maison pour passer de BT à un autre mode ou pour désactiver le cinéma maison. • Sauf lorsqu’il est déconnecté par l’entremise de la fonction de conversion, le dispositif Bluetooth connecté prendra un certain temps pour transmettre de l’information au cinéma maison avant de désactiver la connexion. (Le temps de déconnexion peut différer selon le dispositif Bluetooth) | REMARQUES | Cette fonction d’appariement ne peut être utilisée que si le cinéma maison est allumé. 3. Sur l’écran de l’appareil Bluetooth compatible avec la technologie NFC, un message pour confirmer l’appariement apparaît. Sélectionnez <Oui>. • Une fois l’appariement terminé, le message « Apparié » apparaît. 4. Pour annuler l’appariement NFC, touchez doucement sur l’arrière de la télécommande du une autre fois le cinéma maison avec l’appareil. • Pour apparier un autre appareil NFC au cinéma maison s’il est déjà apparié à un appareil. Mettez à l’arrière de la télécommande du doucement le cinéma maison avec l’appareil Bluetooth compatible avec la technologie NFC. Le cinéma maison annule la connexion existante et apparie le nouvel appareil. | REMARQUES | La fonction NFC est accessible pour les systèmes Android versions 4.1x ‘Jelly Bean’ ou plus récentes. - Cette fonction est uniquement prise en charge par les appareils Android v4.1 ‘Jelly Bean' qui disposent d’un module NFC. Jelly Bean 4.1.X : Passe au mode BT après la mise en correspondance de l’étiquette. Jelly Bean 4,2.X : Passe au mode BT et commence à lire la musique après la mise en correspondance de l’étiquette. La position actuelle de l’antenne NFC diffère d’un appareil Si l’appariement a échoué, vous devez répéter la procédure manuellement. Pour apparier de nouveau les appareils NFC avec votre cinéma maison, appuyez simultanément sur les touches PRESET et EFFECT et maintenez-les enfoncées pendant plus de 2 secondes, 35 secondes après la mise en fonction. à l’autre. Avant la connexion, confirmez l’emplacement de l’antenne de votre appareil. Si votre appareil est couvert ou à l’intérieur d’un étui épais ou d’un boîtier, il pourrait être difficile de réaliser l’appariement. Le est une marque de commerce ou une marque déposée de NFC Forum, Inc. aux États-Unis et dans d'autres pays. Français HT-F9730W_ZC_FRC-0814.indd 39 39 | 2013-08-14 오후 1:12:14 Diffuseur de Médias Visionnement de photos Vous pouvez visionner des photos se trouvant sur un DVD, un périphérique USB, un appareil mobile ou un ordinateur. Utilisation du menu OUTILS Durant la lecture, appuyez sur le touche TOOLS. Pour pouvoir activer la fonction Fond musical, le fichier de photos doit se trouver dans la même unité de stockage que le fichier de musique. La qualité sonore pourrait toutefois être atténuée par le débit binaire du fichier MP3, la taille de la photo et la méthode d'encodage. Vous ne pouvez pas agrandir les sous-titres et les éléments de présentation graphique en mode Plein écran. Précédent Sélectionnez pour passer à l’image précédente. Utilisation des menus Afficher et Options lorsque la liste de photos s’affiche Suivant Sélectionnez pour passer à l’image suivante. Photos Dém. / Arrêter le diaporama Sélectionnez pour lire/interrompre momentanément le diaporama. Paramètres de diaporama Vitesse : Pour choisir une vitesse de défilement du diaporama. Effets : Pour appliquer un effet spécial au diaporama. Zoom Sélectionnez pour agrandir l’image actuelle. (Elle peut être agrandie jusqu’à 4 fois.) Dossier Pivoter Sélectionnez pour faire pivoter l'image. (Cette action fera pivoter l’image dans le sens des aiguilles d’une montre ou dans le sens contraire.) Sélectionnez pour écouter de la musique tout en visionnant un diaporama. Diaporama Musique de fond Affiche tous les fichiers dans le dossier courant, un après l’autre. Si vous désirez créer un diaporama avec un groupe sélectionné de photos, consultez la rubrique Lire le contenu sélectionné ci-dessous. Lire sélection Paramètres Image Mode - Dynamique : Pour accentuer la netteté de l'image. - Standard : Pour la plupart des applications d'affichage. - Cinéma : Il s’agit du meilleur réglage pour regarder des films. - Utilisateur : Vous permet de régler la fonction de netteté et de réduction du bruit, respectivement. Information : Montre l’information sur l’image. La fonction Lire le contenu sélectionné vous permet de créer une liste de lecture en sélectionnant les fichiers spécifiques à lire. Cela fonctionne de la même façon pour tous les supports. Voir la rubrique Création d’une liste de lecture sur un CD audio de la page 37. Envoyer Sélectionnez Envoyer pour téléverser les fichiers sélectionnés vers des sites en ligne (Picasa, Facebook, etc.) ou des périphériques. Pour utiliser Envoyer, vous devez créer un compte sur le site en ligne, puis vous connecter en utilisant la fonction de connexion. Mode égaliseur Personnalisez vos propres préférences sonores en utilisant les paramètres de l’égaliseur. Paramètres égaliseur Cette option est uniquement offerte si le Mode égaliseur est Activer. | REMARQUE | Selon le disque ou le périphérique de stockage, le menu Options pourrait différer. Toutes les options pourraient ne pas s'afficher. Date Groupe tous les fichiers de photos sur le support ou le périphérique de stockage par date. Cliquez sur un groupe pour afficher les photos qu’il contient. Titre Affiche tous les fichiers de photo sur le support ou le périphérique de stockage par titre. Afficher Options Affiche tous les dossiers sur le support ou le périphérique de stockage. | REMARQUE | Selon le disque ou le périphérique de stockage, le menu Options pourrait différer. Toutes les options pourraient ne pas s'afficher. | 40 Français HT-F9730W_ZC_FRC-0814.indd 40 2013-08-14 오후 1:12:17 Écoute de la radio Utilisation des touches d’effets spéciaux de la télécommande 05 En utilisant lestouches de la télécommande 2. Appuyez sur la touche FUNCTION pour sélectionner l’entrée FM. Réglez sur la station souhaitée. • Préréglez Syntonisation 1 : Appuyez sur la touche 5 pour sélectionner Préréglé puis sur la touche TUNING/CH (,.) pour sélectionner la station préréglée. - Avant de syntoniser les stations préréglées, vous devez les ajouter à la mémoire du produit. Voir Préréglable des stations ci-dessous. • Syntonisation manuelle : Appuyez sur la touche 5 pour sélectionner Manuel puis sur la touche TUNING/CH (,.) pour syntoniser une fréquence supérieure. • Syntonisation automatique : Appuyez sur la touche 5 pour sélectionner Manuel et maintenez ensuite la touche TUNING/CH (,.) enfoncée pour rechercher automatiquement les stations. Définition de la fréquence Mono/Stéréo Appuyez sur la touche MO/ST. • Chaque fois que la touche est pressée, le son permute entre STÉRÉO et MONO. • Dans un endroit où la réception est mauvaise, sélectionnez MONO pour obtenir une diffusion claire, sans interférences. SOUND Fonction EFFETS SPÉCIAUX EFFECT Vous permet de sélectionner un mode qui optimise le son. 1. Appuyez sur la touche SOUND EFFECT. 2. Appuyez sur la touche ▲▼ pour sélectionner le mode souhaité. : DSP, Dolby Pro Logic II ou Mode Eff. son.. 3. Appuyez sur les touches ◄► pour sélectionner le mode d’effets spéciaux souhaité. Diffuseur de Médias 1. DSP MP3 Enhancer Power Bass Football Désac. • MP3 Enhancer : permet d’améliorer le son (ex. musique mp3). Vous pouvez rehausser le son de niveau MP3 (24 kHz, 8 bits) au son de niveau CD (44,1 kHz, 16 bits). • Power Bass : augmente le volume des tonalités basses et produit des effets sonores sourds. • Football : Crée un son plus dynamique, réaliste s’apparentant à celui entendu dans un stade. Pour écouter des matchs de football, de soccer et d’autres événements sportifs. • Désac. : Sélectionnez cette option pour une écoute normale. Dolby Pro Logic II Préréglage des stations Exemple : préréglage de la station FM 89.10 dans la mémoire. 1. Appuyez sur la touche FUNCTION pour sélectionner FM. 2. Appuyez sur la touche TUNING/CH (,.) pour sélectionner <89.10>. 3. Appuyez sur la touche TUNER MEMORY. • NUMÉRO clignote sur l’affichage. 4. Appuyez de nouveau sur la touche TUNER MEMORY. • Appuyez sur la touche TUNER MEMORY avant que NUMÉRO disparaisse automatiquement de l’affichage. • Dès que vous avez appuyé sur la touche TUNER MEMORY, NUMÉRO disparaît de l’affichage et la station est mise en mémoire. 5. Pour prérégler une autre station, répétez les étapes 2 à 4. • Pour syntoniser une station préréglée, appuyez sur la touche 5 pour sélectionner Préréglé, puis appuyez sur la touche TUNING/CH (,.) pour sélectionner la station de préréglée. Cinéma Musique Jeu Matrix Pro Logic Désac. • Cinéma : rend une piste sonore plus réaliste. • Musique : lorsque vous écoutez de la musique, vous pouvez apprécier les effets sonores comme si vous écoutiez un vrai concert. • Jeu : Améliore l’attrait de l'audio du jeu. • Matrix : sélectionnez pour écouter le son ambiophonique multicanal. • Pro Logic : sélectionnez pour écouter une source sonore 2CH avec un son ambiophonique 5.1CH en utilisant toutes les enceintes. - Selon le signal d’entrée, certaines enceintes pourraient ne pas diffuser le son. • Désac. : Sélectionnez cette option pour une écoute normale. Français HT-F9730W_ZC_FRC-0814.indd 41 41 | 2013-08-14 오후 1:12:17 Diffuseur de Médias Mode Eff. son. 4. Hall symphonique de Boston (Hall 1) Hall philharmonique de Bratislava (Hall 2) Club de Jazz de Séoul B Église de Séoul Amphithéâtre (Rock) Désac. • Hall symphonique de Boston (Hall 1) : Offre des voix nettes comme dans une salle de concert. • Hall philharmonique de Bratislava (Hall 2) : Offre des voix nettes comme dans une salle de concert, moins puissant que HALL1. • Club de Jazz de Séoul B : Conseillé pour le jazz. • Église de Séoul : Procure le sentiment d’être dans une grande église. • Amphithéâtre (Rock) : Conseillé pour le rock and roll. • Désac. : Sélectionnez cette option pour une écoute normale. Appuyez une seconde fois sur la touche TV SOUND pour désactiver le son du téléviseur. • Lorsque le son du téléviseur est désactivé, les signaux audio du téléviseur sont restitués par le système Anynet+ TV. Utilisation de TV SOUND: 1) Si vous souhaitez restituer les signaux audio de votre téléviseur par les enceintes de votre cinéma maison. 2) Si vous souhaitez restituer les signaux audio provenant d’un périphérique USB branché au téléviseur par les enceintes de votre cinéma maison. Spécification du support TV SOUND ON/OFF (SON DU TÉLÉVISEUR ACTIVÉ/DÉSACTIVÉ) Branché au téléviseur 3D Sound Vous pouvez obtenir un son ambiophonique plus vif et plus naturel avec des tonalités sonores enrichies en réglant la profondeur du son à l’aide des options de niveau. Désac. Élevé Faible Système Anynet+ (HDMI CEC) pris en charge par le téléviseur Paramètre Son du Son du Anynet+ téléviseur téléviseur (HDMI CEC) activé désactivé ACTIVÉ O O DÉSACTIVÉ O X Absence de son O X | REMARQUE | Non disponible en mode FM. TV SOUND TV Sound Système Anynet+ (HDMI CEC) non pris en charge par le téléviseur Si vous disposez d’un téléviseur qui prend en charge la fonction Anynet+ (HDMI-CEC), la touche TV SOUND vous permet de restituer les signaux audio par les haut-parleurs du téléviseur ou les enceintes du cinéma maison. Pour l’utiliser, exécutez les étapes suivantes : 1. Branchez un câble HDMI au téléviseur et au cinéma maison. (Voir page 18.) 2. Configurez la fonction Anynet+ (HDMI-CEC) Activ. sur le cinéma maison et le téléviseur. 3. Appuyez sur la touche TV SOUND de la télécommande. TV SOUND ON clignote sur l'écran du panneau avant, puis passe à D. IN. • Lorsque le son du téléviseur est activé, les signaux audio du téléviseur sont restitués par les enceintes du cinéma maison. | 42 Français HT-F9730W_ZC_FRC-0814.indd 42 2013-08-14 오후 1:12:18 Services Réseau Vous pouvez profiter de différents services réseau comme la diffusion en continu de vidéos ou des applications en ligne en connectant le produit à votre réseau. Connecter le produit au réseau. (Voir page 19.) 2. Configurer les paramètres réseau. (Voir page 25-27.) Connexion à votre compte Samsung Avant d’accéder aux options Films et programmes télévisés ou Applications, nous vous suggérons de vous brancher à votre compte Samsung. Pour vous connecter à votre compte Samsung, suivez ces directives : 1. Lorsque l’écran Accueil est affiché, appuyez sur la touche ROUGE (A). L'écran de connexion apparaît. 2. Sélectionnez le champ Courriel, puis appuyez sur la touche E. Le clavier virtuel apparaît. Utilisez le clavier pour saisir votre adresse de courrier électronique. Ensuite, sélectionnez Fait, puis appuyez sur la touche E. L'écran de connexion apparaît. 3. 4. Sélectionnez le champ Mot de passe, puis appuyez sur la touche E. Le clavier virtuel apparaît. 5. Utilisez le clavier pour saisir votre mot de passe. Ensuite, sélectionnez Fait, puis appuyez sur la touche E. L'écran de connexion apparaît. 6. Pour simplifier la procédure de connexion la prochaine fois, sélectionnez Connecter automatiquement, puis appuyez sur la touche E. 7. Sélectionnez Connex., puis appuyez sur la touche E. Le produit vous connecte à votre compte. Votre compte de courrier électronique est affiché dans le coin inférieur gauche de l’écran. Avant l’utilisation des options Films et programmes télévisés ou Applications Si vous n’avez pas configuré Smart Hub, lorsque vous utilisez la fonction Films et programmes télévisés ou Applications pour la première fois, le produit vous demandera d’exécuter la procédure de configuration de Smart Hub. 1. 2. 3. 4. 5. 6. | REMARQUE | Si vous avez sélectionné Connecter automatiquement, le produit entrera automatiquement votre adresse de courrier électronique et votre mot de passe à la prochaine utilisation. Il vous suffira de sélectionner Connexion. Si votre adresse de courrier électronique et votre mot de passe ne s’affichent pas lorsque l’écran de connexion apparaît, sélectionnez la touche à l’aide de la flèche descendante adjacente au champ de courrier électronique, puis appuyez sur la touche E. Une liste déroulante de tous les comptes enregistrés apparaîtra. Sélectionnez votre compte, puis appuyez sur la touche E. Le produit inscrira les données dans les champs de courrier électronique de même que le mot de passe. 7. 8. 9. Sur l’écran d’accueil, sélectionnez soit MoFilms et émissions de télévision ou Applications, puis appuyez sur la touche E. Si vous avez sélectionné Applications, passez à l’étape 4. Si vous avez sélectionné Films et émissions de télévision, la fenêtre contextuelle Smart Hub s’affiche vous demandant si vous souhaitez configurer Smart Hub. Sélectionnez Oui, puis appuyez sur la touche E. L'écran d’accueil apparaît. Sélectionnez Démarrer, puis appuyez sur la touche E. L’écran Conditions, politiques relatives à la vie privée de Smart Hub apparaît. Sur l’écran Conditions, politiques relatives à la vie privée de Smart Hub, vous devez prendre connaissance des conditions et des politiques relatives à la vie privée de Smart Hub pour utiliser Smart Hub. Déroulez vers le bas, puis cliquez sur les touches Afficher les détails pour prendre connaissance des documents en entier. Une fois la lecture terminée, déroulez vers le haut jusqu’au premier champ de saisie, puis appuyez sur la touche E pour accepter les conditions et consentir aux politiques relatives à la vie privée. Appuyez deux fois sur la touche ► pour accéder à l’écran Avis complémentaires relatifs à la confidentialité. Cliquez sur la touche Afficher les détails pour afficher l’avis en entier. Une fois la lecture terminée, déroulez vers le haut jusqu’au premier champ de saisie, puis appuyez sur la touche E. | REMARQUE | Vous n’avez pas besoin de consentir à l’avis complémentaire relatif à la confidentialité, mais une ou plusieurs fonctions Smart TV pourraient ne pas vous être accessibles. 10. Appuyez deux fois sur la touche ►. L'écran Configuration terminée apparaît. Appuyez sur la touche E. Français HT-F9730W_ZC_FRC-0814.indd 43 Services Réseau 1. être connecté, la fenêtre contextuelle Mon compte s'affiche. Dans la fenêtre contextuelle, vous pouvez vous déconnecter, modifier les renseignements sur le compte, apparier les comptes de services, supprimer des comptes du périphérique et désactiver un compte. Pour louer des films et acheter des applications, vous devez disposer d’une carte de crédit enregistrée dans votre compte. Si vous n’avez pas enregistré une carte, sélectionnez Modifier les renseignements sur le compte. Sur la page Modifier les renseignements sur le compte, sélectionnez Enregistrer carte, appuyez sur la touche E, puis suivez les directives à l’écran. 06 Pour utiliser les services réseau, vous devez d’abord : Si vous appuyez sur la touche ROUGE (A) après vous 43 | 2013-08-14 오후 1:12:19 Services Réseau Si aucune carte de crédit n'est associée à votre Utilisation de l’option Films et programmes télévisés Vous pouvez télécharger ou diffuser en continu des films et des programmes télévisés facturables ou gratuits et les afficher sur votre téléviseur. Par les applications Films et émissions de télévision En vedette compte Samsung, l'écran d'enregistrement de la carte s'affichera après l'ouverture de la session. Suivez les directives apparaissant à l’écran. Pour louer des films et acheter des applications, vous devez disposer d’une carte de crédit enregistrée dans votre compte. Recommandé Vous pouvez télécharger les applications à partir d’Internet, accéder à différents contenus facturables ou gratuits et les visionner sur votre téléviseur. Pour accéder à certaines applications, vous devez disposer d’un compte Samsung Apps. Aperçu des écrans d'applications 1 Favoris En vedette Films Émissions de télé 2 Achetés Applications 1. Sur l’écran d’accueil, sélectionnez Films et émissions de télévision, puis appuyez sur la touche E. Recommandé 2 1 3 4 5 Samsung TV Mes apps 2. 3. 4. Sélectionnez un des films présentés ou recommandés, puis appuyez sur la touche E. La page de ce film s’affiche. OU Utilisez la touche ▼ pour aller au bas de l’écran. Sélectionnez Favoris, En vedette, Films, Émissions de télé, ou Achetés, puis appuyez sur la touche E. Sur la page qui s’affiche, utilisez les touches ▲▼◄► pour sélectionner un programme ou un film, puis appuyez sur la touche E. Sur l’écran Programmes télévisés ou Films, vous pouvez aussi sélectionner Nouveautés, Les plus populaires ou Genres pour afficher plus de programmes ou de films accessibles. Sur l’écran Genre, utilisez les touches ▲▼◄► pour sélectionner un genre, puis appuyez sur la touche E. Pour effectuer une sélection sur une page affichant les programmes télévisés ou les films, utilisez les touches ▲▼◄► pour effectuer une sélection, puis appuyez sur la touche E. Pour visionner une sélection, sélectionnez Regarder maintenant, puis appuyez sur la touche E. Un écran de sélection apparaît énumérant plusieurs ressources permettant de louer le film ainsi que le tarif de location. Sélectionnez une ressource, puis appuyez sur la touche E. Suivez les directives à l’écran pour démarrer le film. | REMARQUE | Si vous n’êtes pas déjà connecté à votre compte Web Browser Apps Apps Autres Apps 3 4 1 Recommandé : Affiche les contenus recommandés gérés par Samsung. Cette option vous permet de télécharger plusieurs applications gratuites ou payantes. 2 Applications offertes : Utilisez les touches ▲▼◄► pour mettre en surbrillance l'application offerte, puis appuyez sur la touche E. De l'information sur l'application offerte s'affiche. 3 Mes apps : Affiche votre galerie personnelle d’applications modifiées dans l’écran Tous téléchargés. 4 Autres Apps : Sélectionnez Autres Apps pour accéder à l’écran Tous téléchargés dans lequel vous pouvez ajouter, modifier et supprimer des applications et afficher toutes les applications téléchargées. Samsung, l’écran de connexion apparaît après l’étape 3 et vous devez vous connecter. | 44 Français HT-F9730W_ZC_FRC-0814.indd 44 2013-08-14 오후 1:12:20 Démarrage d’une application Vous pouvez télécharger différentes applications facturables ou gratuites au moyen de l’option Applications Samsung. 1. Sélectionnez Applications sur l’écran d’accueil, puis appuyez sur le bouton E. 2. Sur l’écran Applications, utilisez les touches ▲▼◄► pour sélectionner une application, puis appuyez sur la touche E. L’application démarre. Sur l’écran Applications, sélectionnez Samsung Apps, puis appuyez sur la touche E. L'écran Apps Samsung apparaît. 2. Une série de nouvelles applications apparaissent au haut de l’écran sous Nouveautés. Utilisez les touches ◄► pour faire défiler la liste vers la droite ou la gauche, puis sélectionnez une application. Appuyez sur la touche E pour afficher plus d’information sur l’application. Sur l’application est gratuite, sélectionnez Téléch., puis appuyez sur la touche E pour télécharger l’application. S’il s’agit d’une application payante, sélectionnez Achat, appuyez sur la touche E, puis suivez les directives à l’écran. Utilisation de l’écran Toutes téléchargées Autres Apps Vue : Téléchargé le Services Réseau 1. 06 Téléchargement d’applications Options 1 /23 WebBrowser Samsung Apps | REMARQUE | Pour acheter une application, vous devez d'abord 3. 4. 5. 6. 7. 8. vous connecter à votre compte Samsung et avoir une carte de crédit enregistrée à ce compte. Appuyez sur la touche ROUGE (A) de la télécommande pour vous connecter. Si aucune carte n'est enregistrée, après l'ouverture de session, appuyez de nouveau sur la touche ROUGE (A), puis sélectionnez Modifier les renseignements sur le compte dans la fenêtre contextuelle qui apparaît. Sur la page Modifier les renseignements sur le compte, sélectionnez Enregistrer la carte, appuyez sur la touche E, puis suivez les directives à l’écran. Vous pouvez accéder aux applications et les télécharger à partir des catégories énumérées à la gauche de l'écran. Pour des directives, passez à l’étape 4. Après le téléchargement de l’application, sélectionnez Exécuter, puis appuyez sur la touche E pour utiliser l’application. Pour utiliser l’application plus tard, appuyez sur la touche RETURN. Dans un cas ou l’autre, l’icône de l’application s’affiche sur l’écran des applications. Pour afficher d’autres applications, utilisez les touches ▲▼◄► pour aller à la liste de catégories du côté gauche de l’écran. Utilisez les touches ▲▼ pour sélectionner une catégorie. Chaque fois que vous surlignez une autre catégorie, un ensemble différent d’applications s’affiche à droite. Utilisez la touche ► pour aller aux applications et les touches ▲▼◄► pour passer d’une application à une autre. Pour afficher de plus amples renseignements sur l'application, sélectionnez-la, puis appuyez sur la touche E. Pour télécharger l’application, suivez les directives aux étapes 2 et 3. WebBrowser Mémoire Catégorie : XXXXX | Version : X.XXX | Taille : XX.XKB 109.48 MB / 629.43 MB L’écran Toutes téléchargées énumère toutes les applications que vous avez téléchargées. Il vous permet de : • Trier les applications sur l’écran Toutes téléchargées par Téléchargé le, Récemment ouverts, et Titre. • Appliquer un certain nombre de fonctions du Menu Options aux applications énumérées dans la section Mes applications de l’écran Applications notamment la mise à jour d’applications, le déplacement d’applications dans un fichier, la suppression des applications dans Mes applications et en verrouillant les applications. • Lancer les applications. Tri des applications Pour trier les applications de l’écran Toutes téléchargées, exécutez les étapes suivantes : 1. Sur l’écran Accueil, sélectionnez Applications, puis appuyez sur la touche E. 2. Sur l’écran Applications, utilisez la touche ▼ pour déplacer le point d’accès téléchargé au bas de la page, puis appuyez sur la touche E. 3. Sur l’écran Toutes téléchargées, utilisez les touches ▲► pour accéder à Affich au haut de l’écran, puis appuyez sur la touche E. 4. 4. Dans la liste déroulante qui apparaît, sélectionnez Téléchargé le, Récemment ouverts ou Titre, puis appuyez sur la touche E. Les applications de l'écran Toutes téléchargées sont triées selon les critères choisis. Français HT-F9730W_ZC_FRC-0814.indd 45 45 | 2013-08-14 오후 1:12:25 Services Réseau Utilisation des fonctions du menu Options Verr./Déverr. Suppression d’une application dans Mes applications 1. À l’aide de la fonction Verrouiller/Déverouiller et du NIP de sécurité, vous pouvez verrouiller des applications pour empêcher qu’elles ne soient lancées au moyen de l’écran Applications ou de l’écran Toutes téléchargées. Le NIP par défaut est 0000. 2. 1. 3. 2. 3. 4. 5. 6. 7. 8. Sur l’écran Toutes téléchargées, utilisez les touches ▲► pour accéder à Options au haut de l’écran, puis appuyez sur la touche E. Sélectionnez Verr./Déverr. puis appuyez sur la touche E. Lorsque le service de verrouillage apparaît, saisissez le NIP en utilisant les touches numériques de votre télécommande. Pour verrouiller une application, sélectionnez l’application, puis appuyez sur la touche E. Un cadenas apparaît sur l’application. Répétez la procédure pour verrouiller d’autres applications individuelles. Pour déverrouiller une application, sélectionnez l’application, puis appuyez sur la touche E. Pour verrouiller toutes les applications en même temps, utilisez les touches ▲▼ pour sélectionner la touche Verr. tout, puis appuyez sur la touche E. Pour déverrouiller toutes les applications en même temps, utilisez les touches ▲► pour sélectionner la touche Déverr. tout, puis appuyez sur la touche E. Appuyez deux fois sur la touche RETURN pour revenir à l’écran Applications. Les applications verrouillées affichent un cadenas dans le coin supérieur droit. Mod. Mes apps La fonction Modifier mes applications vous permet d’ajouter et de supprimer des applications dans Mes applications. Elle vous permet également de modifier la position d’une application dans Mes applications. Ajout d’une application à Mes applications 1. 2. 3. Sur l’écran Toutes téléchargées, utilisez les touches ▲► pour accéder à Options au haut de l’écran, puis appuyez sur la touche E. Sélectionnez Mod. Mes apps, puis appuyez sur la touche E. L'écran Modifier mes applications apparaît. Sélectionnez une application tout en couleurs dans la rangée d'applications du haut, puis appuyez sur la touche E. L’icône de l’application tout en couleurs s’affiche dans l’espace réservé à Mes applications et l’icône d’application de la rangée du haut apparaît en gris. 4. 5. Déplacement d’une application dans Mes applications 1. 2. 3. 4. 5. 4. applications. Lorsque vous retournez à l’écran Applications, l’application s’affiche dans Mes applications. | 46 Français HT-F9730W_ZC_FRC-0814.indd 46 Sur l’écran Toutes téléchargées, utilisez les touches ▲► pour accéder à Options au haut de l’écran, puis appuyez sur la touche E. Sélectionnez Mod. Mes apps, puis appuyez sur la touche E. L'écran Modifier mes applications apparaît. Sélectionnez l’application que vous souhaitez déplacer dans Mes applications, puis appuyez sur la touche E et les touches ▲▼◄► pour déplacer l’icône de l'application en direction d'une des flèches (<, >, ^, etc.) qui entourent l’icône de l’application. L’icône de l’application se déplace dans la direction choisie. Une fois que vous avez placé l’icône d’application à l’emplacement désiré, appuyez sur la touche E. Lorsque vous retournez à l’écran Applications, l’application se trouvera à l’emplacement sélectionné. Créer dossier L’option Créer un dossier vous permet de créer un dossier sur l'écran Téléchargées et d'y placer les applications. 1. 2. 3. 4. | REMARQUE | Les applications en grisé sont déjà dans Mes Sur l’écran Toutes téléchargées, utilisez les touches ▲► pour accéder à Options au haut de l’écran, puis appuyez sur la touche E. Sélectionnez Mod. Mes apps, puis appuyez sur la touche E. L'écran Modifier mes applications apparaît. Sélectionnez l’application que vous souhaitez supprimer de Mes applications, puis appuyez sur la touche E et les touches ▲▼◄► dans la direction . La fenêtre contextuelle Supprimer de mes applications s’affiche. Sélectionnez Oui, puis appuyez sur la touche E. Lorsque vous retournez à l’écran Applications, l’application ne s’affiche plus dans Mes applications. 5. 6. Sur l’écran Toutes téléchargées, utilisez les touches ▲► pour accéder à Options au haut de l’écran, puis appuyez sur la touche E. Sélectionnez Créer dossier, puis appuyez sur la touche E. La fenêtre contextuelle Création du nom du dossier s’affiche. Appuyez sur la touche E. Le clavier apparaît. Sélectionnez la touche Suppr tout du côté droit, puis appuyez sur la touche E pour supprimer le dossier 1 du champ de saisie. Ensuite, saisissez le nom que vous voulez donner au dossier à l’aide du clavier. Lorsque vous avez terminé, sélectionnez la touche Fait du côté droit, puis appuyez sur la touche E. La fenêtre virtuelle apparaît. Sélectionnez OK, puis appuyez sur la touche E. Le nouveau dossier apparaît dans la liste d'applications à la gauche de l'écran. 2013-08-14 오후 1:12:31 6. La fonction Envoyer au dossier vous permet de déplacer des applications vers le dossier de votre choix. 7. 2. 3. 4. 5. Sur l’écran Toutes téléchargées, utilisez les touches ▲► pour accéder à Options au haut de l’écran, puis appuyez sur la touche E. Sélectionnez Dépl. vers doss., puis appuyez sur la touche E. L'écran Envoyer au dossier apparaît. Utilisez les touches ▲▼◄► pour accéder à une application, puis appuyez sur la touche E pour la sélectionner. Une coche apparaît dans le coin supérieur gauche de l’application. Pour désélectionner une application, appuyez sur la touche E. La coche disparaît. Répétez l’étape 3 pour sélectionner d’autres applications. Supprimer La fonction Supprimer vous permet de supprimer des applications et des dossiers à partir de l’écran Mes applications. Si les applications sont stockées dans un dossier, le dossier et les applications sont supprimés en bloc. La fonction Supprimer efface les applications de façon permanente. Si vous souhaitez réutiliser une application supprimée, vous devez la télécharger de nouveau. 1. 2. | REMARQUE | Pour sélectionner toutes les applications téléchargées, 6. 7. 8. 9. sélectionnez Choisir tout dans le coin supérieur droit de l’écran, puis appuyez sur la touche E. Pour désélectionner toutes les applications, sélectionnez Désélectionner tout dans le coin supérieur droit de l’écran, puis appuyez sur le bouton E. Ensuite, sélectionnez Sélect. dossier au haut de l’écran, puis appuyez sur la touche E. La fenêtre contextuelle Sélectionner un dossier s’affiche. Dans la fenêtre contextuelle Sélectionner un dossier, utilisez les touches ▲▼ pour sélectionner le dossier où vous désirez stocker les applications que vous avez sélectionnées, puis appuyez sur la touche E. Le message contextuel Applications déplacées s’affiche. Appuyez sur la touche E. Pour ouvrir le dossier, utilisez les touches ▲▼◄► pour mettre le dossier en surbrillance, puis appuyez sur la touche E. Renommer doss. La fonction Renommer le dossier vous permet de renommer un dossier existant. 1. Sur l’écran Toutes téléchargées, utilisez les touches ▲► pour accéder à Options au haut de l’écran, puis appuyez sur la touche E. 2. Sélectionnez Renommer doss., puis appuyez sur la touche E. L’écran Renommer le dossier apparaît, et un dossier est mis en surbrillance. 3. Utilisez les touches ▲▼◄► pour mettre en surbrillance un dossier de votre choix, puis appuyez sur la touche E. La fenêtre contextuelle Renommer apparaît. 4. Appuyez sur la touche E. Le clavier apparaît. 5. Saisissez le nouveau nom du dossier. Ensuite, sélectionnez Fait à la droite de l’écran, puis appuyez sur la touche E. La fenêtre contextuelle Renommer réapparaît affichant le nouveau nom. 3. 4. 5. Sur l’écran Toutes téléchargées, utilisez les touches ▲► pour accéder à Options au haut de l’écran, puis appuyez sur la touche E. Sélectionnez Supprimer, puis appuyez sur la touche E. L'écran Supprimer apparaît. Utilisez les touches ▲▼◄► pour accéder à une application ou à un dossier, puis appuyez sur la touche E pour effectuer la sélection. Une coche apparaît dans le coin supérieur gauche de l’application ou du dossier sélectionné. Pour désélectionner une application, appuyez sur la touche E. La coche disparaît. Répétez l’étape 3 pour sélectionner d’autres applications ou dossiers. | REMARQUE | Pour sélectionner toutes les applications téléchargées, sélectionnez Choisir tout dans le coin supérieur droit de l’écran, puis appuyez sur la touche E. Pour désélectionner toutes les applications, sélectionnez Désélectionner tout dans le coin supérieur droit de l’écran, puis appuyez sur le bouton E. 6. Une fois toutes les sélections effectuées, sélectionnez Supprimer au haut de l’écran, puis appuyez sur la touche E. La fenêtre contextuelle apparaît. 7. Sélectionnez Oui, puis appuyez sur la touche E. Toutes les applications que vous avez sélectionnées sont supprimées. | REMARQUE | Vous ne pouvez pas supprimer immédiatement une application ou un dossier verrouillé. Si vous sélectionnez une application ou un dossier verrouillés pour les supprimer à l'étape 7, la fenêtre contextuelle Service de verrouillage apparaît. Saisissez le NIP de sécurité dans la fenêtre contextuelle, puis appuyez sur la touche E. Le verrouillage sera levé et l'application ou le dossier sera supprimé. Français HT-F9730W_ZC_FRC-0814.indd 47 Services Réseau 1. Sélectionnez OK, puis appuyez sur la touche E. Le dossier est renommé. Sélectionnez Close à droite de l’écran, puis appuyez sur la touche E. 06 Dépl. vers doss. 47 | 2013-08-14 오후 1:12:31 Services Réseau Met. app. à j. Lorsque l’application doit être mise à jour à la dernière version, sélectionnez Applications, puis Autres Apps. À l'écran Autres Apps, sélectionnez Met. app. à j., puis sélectionnez l’application dans la liste. L’application commence la mise à jour à la dernière version. Par contre, Met. app. à j. apparaît à l’écran seulement lorsque la mise à jour est requise. Utilisation du navigateur Web Vous pouvez accéder à Internet par l’application du navigateur Web. Sélectionnez Navigateur Web sur l’écran Accueil, puis appuyez sur la touche E. | REMARQUE | Lorsque vous utilisez le navigateur Web avec le produit Screen Mirroring La fonction de mise en miroir de l’écran vous permet d’afficher l’écran de votre téléphone intelligent ou d’un périphérique intelligent sur le téléviseur connecté à votre système cinéma maison. 1. 2. 3. 4. 5. Lorsque l’écran d’accueil du Blu-ray s’affiche, appuyez sur la touche BLEUE (D) de la télécommande. L’écran Mise en miroir apparaît. Lancez AllShare Cast sur votre appareil. Sur votre appareil, trouvez le nom du système de cinéma maison dans la liste des appareils disponibles, puis sélectionnez-le. Le téléviseur affiche un message de connexion (par exemple, Connexion à Android_92gb…), puis le message de connexion réalisée. Quelques minutes plus tard, l’écran de votre appareil apparaît sur l'écran de votre téléviseur. | REMARQUE | Lorsque vous utilisez la fonction de mise en miroir à l’écran, les images ou le son pourraient être saccadés selon l’environnement. Vous pouvez vous brancher à un dispositif qui prend en charge AllShare Cast. Il convient de noter que selon le fabricant, un tel dispositif pourrait ne pas être complètement pris en charge. Pour obtenir plus de renseignements sur l'assistance sur les connexions mobiles, reportez-vous au site Web du fabricant. Les transmissions Bluetooth peuvent interférer avec le signal de mise en miroir de l’écran. Avant d’utiliser la fonction de mise en miroir de l'écran, nous vous recommandons fortement de désactiver la fonction Bluetooth de votre téléphone intelligent ou de votre périphérique intelligent. connecté par HDMI à un téléviseur compatible avec BD Wise – et que la fonction BD Wise est activée – le navigateur est optimisé pour remplir l’écran et la résolution du téléviseur est réglée automatiquement à la résolution optimale. Le navigateur Web n’est pas compatible avec les applications Java. Si vous essayez de télécharger un fichier et si le fichier ne peut pas être sauvegardé, un message d’erreur apparaît. E-commerce (achat de produits en ligne) n’est pas pris en charge. ActiveX n’est pas pris en charge. L’accès à certains sites Web et à des navigateurs Web exploités par des entreprises en particulier pourrait être bloqué. Navigation par liens et Navigation par pointeur Le navigateur Web propose deux types de navigation : par pointeur et par liens. Lorsque vous lancez le navigateur la première fois, l'option de navigation par pointeur est active. Si vous utilisez une souris pour naviguer dans le navigateur Web, nous vous recommandons de garder cette option active. Si vous utilisez votre télécommande pour naviguer dans le navigateur Web, nous vous recommandons de remplacer l’option de navigation par pointeur par l’option de navigation par liens. La navigation par liens déplace un surlignement d’un lien à un autre dans le navigateur Web. Cette option est beaucoup plus rapide que la navigation par pointeur lors de l’utilisation de la télécommande. Pour activer la navigation par liens, exécutez les étapes suivantes : 1. Utilisez les touches ▲▼◄► de votre télécommande pour déplacer le pointeur vers l’icône de navigation par liens se trouvant dans le coin supérieur droit de l'écran. L'icône de navigation par liens est la troisième icône à partir de la droite. Le pointeur se trouve dans la bonne position si l’icône devient bleue et que la mention « Navig. par lien » apparaît à l’écran. 2. Appuyez sur la touche E. La navigation par liens est activée et le sera chaque fois que vous utiliserez le navigateur Web. | 48 Français HT-F9730W_ZC_FRC-0814.indd 48 2013-08-14 오후 1:12:32 Le clavier virtuel s’affiche lorsque vous cliquez sur http://www.samsung.com , ou le ou lorsque vous accédez à des données ou à un champ de saisie de texte et que vous appuyez ensuite sur la touche E. E 1 http://www.samsung.com http://www.samsung.com 100% 100% Services Réseau Utilisation du clavier virtuel Le panneau de commande qui traverse le haut de l’écran comporte une série d’icônes qui permettent de lancer plusieurs fonctions. Les icônes sont décrites ci-dessous, en commençant par l’icône complètement à gauche de l’écran. 06 Aperçu du panneau de commande Pendant que vous entrez des caractères, le texte rocommandé s'afficahera. Caps 123#& 1 2 3 4 5 6 7 8 9 0 q w e r t y u i o p ^ * a s d f g h j k l ~ @ ! Fait z x c v b n m , Annuler ENG www. .com Suppr tout . ? - / 4 Pour contrôler le clavier virtuel à l’aide de votre télécommande, exécutez les étapes suivantes : • • • • • • 1 • • • • • • • : Pour aller à la page précédente. : Pour se déplacer à la page Web suivante. : Affiche les signets et l’écran Historique. Vous pouvez marquer la page courante d’un signet, sélectionner un signet existant, modifier et supprimer des signets. Vous pouvez aussi afficher l’historique de navigation et sélectionner une page à examiner de nouveau. : Pour aller à l’écran Accueil du navigateur Web. http://www.samsung.com : Vous permet d’accéder manuellement à une adresse de page à l’aide du clavier virtuel. : Recharge la page actuelle de sorte qu’elle se rafraîchit à l’écran. : Ajoute la page actuelle aux signets. : Vous permet de chercher des renseignements en saisissant des mots ou des lettres à l’aide du clavier virtuel. Consultez la rubrique Utilisation du clavier virtuel de cette page. 100% : Vous permet d’agrandir ou de réduire l’écran selon des pourcentages variés. : Active la fonction PIP. : Vous permet de passer de la navigation par pointeur à la navigation par liens. : Vous permet de régler les paramètres du navigateur. Consultez la rubrique Utilisation du menu Réglage à la page 50. : Ferme le navigateur Web. 1. Utilisez les touches ▲▼◄► de la télécommande pour déplacer le surlignement vers une lettre ou un chiffre de votre choix. 2. Appuyez sur la touche E pour saisir la lettre ou le chiffre dans le champ de saisie. 3. Pour accéder aux majuscules, déplacez le surlignement sur la touche Caps dans le coin supérieur gauche, puis appuyez sur la touche E. Appuyez de nouveau sur la touche E pendant que la touche Caps est mise en surbrillance pour revenir aux minuscules. 4. Pour accéder aux symboles et à d’autres signes de ponctuation, mettez la touche 123#& de gauche en surbrillance, puis appuyez sur la touche E. 5. Pour supprimer une lettre saisie, déplacez le surlignement vers la touche , puis appuyez sur la touche E. 6. Pour supprimer toutes les lettres saisies, déplacez le surlignement vers la touche Suppr tout, puis appuyez sur la touche E. 7. Après la saisie, déplacez le surlignement vers la touche Fait, puis appuyez sur la touche E. | REMARQUE | Si un clavier sans fil est branché à votre produit, vous pouvez l’utiliser pour saisir des lettres, des chiffres, des symboles et des signes de ponctuation. Veuillez noter que le clavier sans fil ne peut fonctionner que si le clavier virtuel apparaît. Son utilisation se limite à la saisie de lettres, de chiffres, de symboles et de signes de ponctuation. Français HT-F9730W_ZC_FRC-0814.indd 49 49 | 2013-08-14 오후 1:12:33 Services Réseau Options du clavier virtuel Approved Sites Vous permet de restreindre l'accès des enfants à des pages Web inappropriées en limitant l'accès aux sites Web que vous avez enregistrés. Chaque fois que vous accédez à la fonction Sites approuvés, l’écran de NIP apparaît. La première fois que vous accédez à la fonction Sites approuvés, saisissez le NIP par défaut (0000) en utilisant les touches numériques de votre télécommande. Vous pouvez modifier le NIP en utilisant le mot de passe de réinitialisation pour la fonction Sites autorisés. Reportez-vous à l’information ci-dessous. Fonction de sites approuvés : Permet d’activer et de désactiver la fonction Sites autorisés. Réinitial. mot de passe sites approuvés : Permet de modifier le mot de passe de la fonction Sites autorisés. Ajout site actuel : Vous permet d’ajouter le site Web actuellement affiché à la liste des sites autorisés. Gérer les sites approuvés : Vous permet de saisir des URL à ajouter à la liste de sites autorisés et de supprimer les sites de la liste de sites autorisés. Si vous activez l’option Sites approuvés et que vous n’avez pas ajouté de sites à votre liste de sites autorisés, vous ne serez pas en mesure d’accéder aux sites Internet. Navigation privée activée/ désact. Active ou désactive le mode Confidentiel. Lorsque le mode Confidentiel est activé, le navigateur ne conserve pas en mémoire les URL des sites que vous visitez. Si vous voulez activer le mode Confidentiel, sélectionnez OK. Si le mode Confidentiel est activé, l'icône Arrêter apparaît devant l’URL au haut de l’écran. Pour désactiver le mode Confidentiel, sélectionnez-le de nouveau lorsqu'il est activé. Pour accéder aux options du clavier virtuel, mettez la touche dans le coin inférieur gauche du clavier en surbrillance, puis appuyez sur la touche E. Langue Permet de sélectionner la langue de votre clavier. L’anglais, le français, le russe comptent au nombre des choix. Texte proposé Le clavier vous proposera des termes pendant la saisie du texte. Vous pouvez Activer ou Désactiver cette fonction. Suggestion de la prochaine lettre Le clavier vous proposera la lettre suivante pendant la saisie de lettres. Les suggestions apparaissent dans un cercle entourant la lettre que vous venez de saisir. Vous pouvez sélectionner une lettre suggérée ou passer à une autre lettre. Vous pouvez Activer ou Désactiver cette fonction. Utilisation du menu Réglage Le menu Réglage contient des fonctions qui permettent de contrôler le mode de fonctionnement du navigateur de même que les paramètres de sécurité. Pour ouvrir le en surbrillance dans le menu Réglage, mettez l’icône panneau de configuration, puis appuyez sur la touche E. Pour sélectionner une option du menu de réglage, mettez l'option en surbrillance, puis appuyez sur la touche E E. http://www.samsung.com 100% Activer la prise Sites approuvés Navigation privée activée Réglage navigateur Web Aide Close Activer la prise/ Désactiver la prise Permet d’Activer et de Désactiver la fonction de pince. Lorsque la fonction de pince est activée, vous pouvez déplacer une page Web vers le haut et le bas sans faire glisser la barre de défilement. La fonction de pince est seulement accessible en mode de navigation par pointeur. | 50 Français HT-F9730W_ZC_FRC-0814.indd 50 2013-08-14 오후 1:12:35 Sur l’Écran Apparier les comptes de services, sélectionnez le service que vous désirez apparier au produit, puis appuyez sur la touche E. 5. Sélectionnez Enregistrer, puis appuyez sur la touche E. 6. Dans l’écran ID et mot de passe, saisissez l’ID que vous utilisez pour vous connecter au service que vous avez sélectionné à l'aide du clavier virtuel. Ensuite, sélectionnez Fait, puis appuyez sur la touche E. 7. Suivez la même procédure pour le mot de passe. Ensuite, sélectionnez Fait, puis appuyez sur la touche E. 8. Sélectionnez OK, puis appuyez sur la touche E. 1. Insérez une clé USB dans la prise USB située sur la face avant du produit et vérifiez l'espace de mémoire disponible. Le périphérique de stockage doit disposer au minimum de 1 Go d’espace libre pour pouvoir prendre en charge les services BDLIVE. Fournit de l’information de base sur le fonctionnement du navigateur Web. 2. Sélectionnez Paramètres sur l'écran Accueil, puis appuyez sur le touche E. 3. Sélectionnez Réseau, puis appuyez sur le touche E. 4. Sélectionnez Paramètres BD-Live, puis appuyez sur le touche E. 5. Sélectionnez Gestion données Blu-ray, puis appuyez sur le touche E. 6. Sélectionnez Sélect. appareil, puis appuyez sur le touche E. 7. Sélectionnez Périphérique USB, puis appuyez sur la touche E. 8. Insérez un disque Blu-ray qui prend en charge BDLIVE. 9. Sélectionnez un élément dans les contenus de service BD-LIVE fournis par le fabricant de disque. | REMARQUE | Selon le site Web, certaines des fonctions de configuration du navigateur Web pourraient ne pas être activées. Les fonctions qui ne sont pas activées apparaissent en gris et ne peuvent pas être utilisées. Appariement des comptes de services Internet au produit BD-LIVE™ Après avoir connecté le produit au réseau, vous pouvez apprécier plusieurs contenus de services cinématographiques offerts sur des disques compatibles avec la technologie BD-LIVE. La fonction Appariement des comptes de services vous permet d’apparier votre produit à vos comptes de services Internet, comme Pandora, de manière à ce qu'il puisse vous brancher automatiquement au service lorsque vous lancez l'application connexe. Pour créer un lien de compte de services, exécutez les étapes suivantes : | REMARQUE | 1. Le mode d’utilisation de BD-LIVE et les contenus 2. 3. Sur l’écran d’accueil, appuyez sur la touche ROUGE (A) de la télécommande pour vous connecter à votre compte Samsung. Une fois connecté, appuyez de nouveau sur la touche ROUGE (A) de la télécommande. Sélectionnez Lier des comptes de service dans la fenêtre contextuelle Mon compte, puis appuyez sur la touche E. fournis peuvent varier en fonction du fabricant du disque. Français HT-F9730W_ZC_FRC-0814.indd 51 Services Réseau Aide 4. 06 Réglage navigateur Web Déf. comme page d'acc. : Vous pouvez définir la page d'accueil du navigateur. Bloc.fen.contxt : Active et désactive le bloqueur de fenêtres publicitaires. Bloquage de pages : Vous pouvez choisir de bloquer les publicités et sélectionner les URL contenant des publicités devant être bloquées. Général : Vous pouvez supprimer des données personnelles comme l’historique des sites Web visités et de l’information sur la navigation (témoins, etc.) et réinitialiser les paramètres du navigateur Web aux valeurs définies par défaut en usine. Encodage : Vous pouvez définir les paramètres d’encodage pour les pages Web à Automatique ou sélectionner le format d'encodage manuellement dans une liste. Curseur : Vous pouvez définir la vitesse du curseur lorsqu’il se trouve à Pointeur et Activer ou Désactiver le curseur intelligent. Info sur le navigateur : Affiche le numéro de version et l’information sur les droits d’auteur du navigateur Web. 51 | 2013-08-14 오후 1:12:36 Annexe Information complémentaire Remarque Connexions SORTIE HDMI • Selon votre téléviseur, certaines résolutions de sortie HDMI pourraient être incompatibles. • Vous devez avoir une connexion HDMI pour visionner les vidéos en 3D. • Un câble HDMI qui est trop long pourrait entraîner du bruit à l’écran. Si c’est le cas, réglez la fonction Couleurs profondes HDMI en la réglant à Désac. dans le menu. Paramètres Réglages 3D • Avec certains disques 3D, pour arrêter la lecture 3D d'un film, appuyez une fois sur la touche 5. Le film s’arrête et le mode 3D est désactivé. Pour changer une sélection d’option 3D pendant la lecture d’un film 3D, appuyez une fois sur la touche 5. Le menu Blu-ray s'affiche. Appuyez de nouveau sur la touche 5, puis sélectionnez Paramètres 3D dans le menu Blu-ray. • Selon le contenu et la position de l'image sur l'écran de votre téléviseur, vous pourriez voir des barres noires verticales sur le côté gauche, droit ou sur les deux côtés. Format d'image télé • Selon le type de disque que vous utilisez, certains rapports de format pourraient ne pas être disponibles. • Si vous sélectionnez un format d’image et des options qui diffèrent de ceux de votre téléviseur, l'image pourrait sembler déformée. • Si vous sélectionnez le format 16:9 original, votre téléviseur pourrait afficher en format 4:3 Pillarbox (barres noires sur les côtés de l'image). BD Wise (produits Samsung uniquement) • Lorsque la fonction BD Wise est activée, le paramètre Résolution se règle automatiquement par défaut à BD Wise et BD Wise apparaît dans le menu Résolution. • Si le produit est connecté à un périphérique ne prenant pas en charge la technologie BD Wise, vous ne pourrez pas utiliser la fonction BD Wise. • Pour assurer un bon fonctionnement de BD Wise, veillez à définir la résolution BD Wise à Activ. dans le menu du produit et dans celui du téléviseur. Sortie numérique • Veillez à sélectionner la sortie numérique appropriée, sans quoi vous risquez de ne rien entendre ou de simplement entendre un bruit fort. • Si le périphérique HDMI (récepteur A/V, téléviseur) ne peut pas prendre en charge les formats compressés (Dolby numérique, DTS), le signal audio est émis en format PCM. • Les DVD ordinaires n’autorisent pas l’audio BONUSVIEW ni les effets sonores de navigation. • Certains disques Blu-ray n’offrent pas d'audio BONUSVIEW ni d’effets sonores de navigation. • La configuration du paramètre Sortie numérique n’a aucune incidence sur la sortie audio analogique (G/D) ou HDMI sur votre téléviseur. Elle a une incidence sur la sortie audio optique et HDMI lorsque votre produit est connecté à un récepteur A/V. • Si vous écoutez des pistes sonores audio MPEG, le signal audio est produit dans le format PCM, quelles que soient vos sélections de sortie numérique (PCM ou train de bits). • La sortie numérique peut être activée lorsque Sélect. haut-parleur est réglé à Haut-parleur TV. Connexion Internet BD-Live • La connexion Internet pourrait être restreinte lorsque vous utilisez du contenu BD-LIVE. Anynet+ (HDMI-CEC) • Selon le type de votre téléviseur, certaines résolutions de sortie HDMI peuvent ne pas être prises en charge. Veuillez vous reporter au guide d'utilisation de votre téléviseur. • Cette fonction n’est pas disponible si le câble HDMI ne peut prend pas en charge le format CEC. • Si le logo Anynet+ est apposé sur votre téléviseur Samsung, le téléviseur prend en charge la fonction Anynet+. Gestion données Blu-ray • Lorsque vous utilisez un périphérique de stockage de mémoire externe, la lecture du disque pourrait être interrompue si vous déconnectez le périphérique USB en cours de lecture. • Seuls les périphériques USB de format de système de fichier FAT (étiquette de volume DOS 8.3) sont pris en charge. Nous vous recommandons d’utiliser les périphériques USB qui prennent en charge le protocole USB 2.0 avec une vitesse de lecture/ écriture de 4 Mbit/s ou supérieure. • La fonction Reprendre lecture pourrait ne pas fonctionner après le formatage du périphérique de stockage. • La capacité totale pour la gestion des données Blu-ray peut différer, selon les conditions. Affichage avant • Vous ne pouvez pas changer la luminosité des et VOL +, -. boutons | 52 Français HT-F9730W_ZC_FRC-0814.indd 52 2013-08-14 오후 1:12:37 • Losque Sélect. haut-parleur est réglé à Hautparleur TV, l’audio est produite par les enceintes du téléviseur. • L’exécution de la fonction Calibrage automatique du son prend 3 minutes environ. • Assurez-vous qu’il n’y a pas de disque dans le produit lorsque vous exécutez la fonction Calibrage automatique du son. • Si le microphone ASC est déconnecté pendant la configuration de la fonction Calibrage automatique du son, la configuration est annulée. • Lorsque la fonction Calibrage automatique du son est activée, les modes DSP, Dolby Pro Logic ll et SFE ne fonctionnent pas. • Si le produit est connecté à des périphériques ou à d'autres composants (p. ex. un AUX, D. IN), la configuration de la fonction Calibrage automatique du son pourrait ne pas fonctionner correctement. • Selon le disque/DVD Blu-ray, vous pourrez peutêtre changer la langue des sous-titres dans le menu Disque. Appuyez sur la touche DISC MENU. • Cette fonction dépend de la sélection des soustitres encodés sur le disque. Elle pourrait ne pas être disponible sur tous les disques Blu-ray/DVD. • L’information relative au mode de fonction principale/BONUSVIEW s’affichera également si le disque Blu-ray comprend une section BONUSVIEW. • Cette fonction change les sous-titres primaires et secondaires en même temps. • Les nombres totaux de sous-titres primaires et secondaires sont affichés respectivement. Audio HDMI • Lorsque la sortie audio HDMI est produite par l’enceinte du téléviseur, elle est automatiquement sous-échantillonnée à 2 canaux. Annexe Sélection de la langue des sous-titres 07 Réglage haut-parleurs Lecture de fichiers JPEG • Vous ne pouvez pas agrandir les sous-titres et les éléments de présentation graphique en mode Plein écran. Diffuseur de Médias Mode Dolby Pro Logic II Canal retour audio • Lorsque la fonction Anynet+ (HDMI-CEC) est désactivée, la fonction Canal retour audio n’est pas disponible. • L’utilisation d’un câble HDMI non certifié pour utiliser la fonction ARC (canal retour audio) pourrait entraîner un problème de compatibilité. • La fonction ARC n’est disponible que si le téléviseur connecté prend en charge la fonction ARC. Lecture Lecture d’un fichier vidéo • Les fichiers vidéo qui ont un débit binaire élevé de 20 Mbit/s ou plus altèrent la capacité des fonctionnalités du produit et pourraient s'arrêter en cours de lecture. • Avant de sélectionner le mode Dolby Pro Logic II, connectez votre périphérique aux prises d’ENTRÉE AUDIO (G et D) du produit. Si vous le connectez à une seule entrée (G ou D), vous ne pouvez pas entendre le son ambiophonique. Utilisation de la touche TOOLS pendant la lecture des films • Si le système est connecté à un téléviseur compatible avec BD Wise sur lequel BD Wise est réglé à Activ., le menu Paramètres image n’apparaît pas. • La fonction Fond musical ne fonctionnera pas si le fichier de musique et le fichier de photo ne se trouvent pas sur le support de stockage. De plus, la qualité sonore pourrait être atténuée par le débit binaire du fichier MP3, la taille de la photo et la méthode d'encodage. Sélection de la langue audio • L’indicateur ◄► ne s’affichera pas à l’écran si la section BONUSVIEW ne contient pas de paramètres audio BONUSVIEW. • Les langues disponibles avec la fonction Langue audio sont celles qui ont été encodées sur le disque. Cette fonction ou certaines langues pourraient ne pas être offertes. • Certains disques Blu-ray pourraient autoriser la sélection de la piste sonore audio numérique PCM ou Dolby en anglais. Français HT-F9730W_ZC_FRC-0814.indd 53 53 | 2013-08-14 오후 1:12:38 Annexe Sélection de la sortie numérique Configuration PCM Connexion Flux de données audio sur disque Bluray Flux de données audio sur DVD Définition pour disque Blu-ray Train de bits (non traité) Train de bits (DTS réencodé) Train de bits (Dolby D réencodé) Récepteur A/V HDMI PCM Jusqu’à 7,1 canaux PCM PCM DTS ré-encodé Dolby numérique réencodé* Dolby numérique Jusqu’à 5,1 canaux PCM Dolby numérique DTS ré-encodé Dolby numérique réencodé* Dolby numérique Plus Jusqu’à 7,1 canaux PCM Dolby numérique Plus DTS ré-encodé Dolby numérique réencodé* Dolby TrueHD Jusqu’à 7,1 canaux PCM Dolby TrueHD DTS ré-encodé Dolby numérique réencodé* DTS Jusqu’à 7.1 canaux PCM DTS DTS ré-encodé Dolby numérique réencodé* Audio DTSHD Haute résolution Jusqu’à 7,1 canaux PCM Audio DTS-HD Haute résolution DTS ré-encodé Dolby numérique réencodé* DTS-HD Master Audio Jusqu’à 7,1 canaux PCM DTS-HD Master Audio DTS ré-encodé Dolby numérique réencodé* PCM PCM 2 canaux PCM 2 canaux PCM 2 canaux PCM 2 canaux Dolby numérique Jusqu’à 5,1 canaux PCM Dolby numérique Dolby numérique Dolby numérique DTS Jusqu’à 7,1 canaux PCM DTS DTS DTS Produit le flux de données audio principal de sorte que votre récepteur A/V peut décoder le train de bits audio. Vous n’entendrez pas l’audio BONUSVIEW ni les effets sonores de navigation. Décode à la fois le flux de données audio de la fonction principale et de BONUSVIEW dans l'audio en format PCM et ajoute les effets sonores de navigation, puis réencode l'audio en format PCM dans le train de bits DTS. Décode à la fois le flux de données audio de la fonction principale et de BONUSVIEW dans l'audio en format PCM et ajoute les effets sonores de navigation, puis réencode l'audio en format PCM dans le train de bits Dolby numérique ou dans le format PCM. N’importe Décode à la fois le flux de données audio de la fonction principale et de BONUSVIEW dans l'audio PCM et ajoute les effets sonores de navigation. Si le train binaire source est à 2 canaux ou mono, le paramètre «Dolby D réencodé» n'est pas appliqué. La sortie sera à 2 canaux PCM. Les disques Blu-ray peuvent inclure trois flux de données audio : - Audio de fonction principale : piste sonore de la fonction principale. - Audio BONUSVIEW : piste sonore additionnelle, p. ex., les commentaires du metteur en scène ou de l’acteur. - Effets sonores de navigation : lorsque vous choisissez certains types de navigation dans les menus, les effets sonores de navigation pourraient se faire entendre. Les effets sonores de navigation sont différents sur chaque disque Blu-ray. | 54 Français HT-F9730W_ZC_FRC-0814.indd 54 2013-08-14 오후 1:12:38 Résolution en fonction du type de contenu Auto Contenu e-Content/ Numérique Annexe BD Wise Disque Blu-ray 07 Type de contenu Configuration Résolution du disque Blu-ray 1080p@60F Sortie UHD : Auto 2160p@24F 2160p@24F Sortie UHD : Désac. 1080p@24F 1080p@24F Résolution max. de l'entrée du téléviseur Résolution max. de l'entrée du téléviseur Fréquence cinéma : Auto (24 ips) 1080p et 1080i seulement 1080p@24F 1080p@24F 1080p 1080p@60F 1080p@60F 1080i 1080i 1080i 720p 720p 720p 480p 480p 480p Fréquence cinéma : Auto Fréquence cinéma : Désac. Type de contenu Configuration BD Wise 480i Sortie UHD : Auto Auto Fréquence cinéma : Auto Conversion DVD 24Fs : Auto DVD Sortie UHD : Désac. Conversion DVD 24Fs : Désac. Fréquence cinéma : Désac. 2160p@24F 1080p@24F Résolution max. de l'entrée du téléviseur Résolution max. de l'entrée du téléviseur Fréquence cinéma : Auto (Conversion DVD 24Fs : Auto) 1080p et 1080i seulement 1080p@24F 1080p 1080p@60F 1080i 1080i 720p 720p 480p 480p | REMARQUE | Si le téléviseur connecté ne prend pas en charge la fréquence cinéma ou la résolution sélectionnée, le message "Si aucune image ne s'affiche après avoir sélectionné 'Oui', patientez 15 secondes pour revenir à la définition précédente. Souhaitez-vous changer la définition?" s’affiche. vous sélectionnez Oui, l’écran du téléviseur devient noir pendant 15 secondes, puis la résolution revient automatiquement à la résolution précédente. Si l'écran reste noir après que vous avez changé la résolution, retirez tous les disques, puis appuyez sur la touche 5 sur le dessus du produit et maintenez-la enfoncée pendant plus de 5 secondes. Tous les paramètres par défaut définis à l'usine sont rétablis. Effectuez de nouveau la procédure de paramétrage initiale. Allez ensuite à Paramètres > Affichage > Définition dans le menu, puis sélectionnez la résolution adéquate pour votre téléviseur. Lorsque vous effectuez la procédure de paramétrage initiale, sélectionnez de nouveau la langue et l’aspect (dimension de l’écran et format) seulement. La réinitialisation ne change pas vos paramètres réseau, vous devriez être en mesure d'omettre la configuration réseau et la mise à niveau du logiciel. Si les paramètres par défaut sont rétablis, toutes les données utilisateur stockées dans les données BD seront supprimées. Le disque Blu-ray doit posséder l'option de cadence de défilement de 24 images par seconde (24 ips) pour le produit que vous puissiez utiliser le mode Fréquence cinéma 24 ips. Français HT-F9730W_ZC_FRC-0814.indd 55 55 | 2013-08-14 오후 1:12:39 Annexe Dépannage Reportez-vous au tableau ci-dessous lorsque ce produit ne fonctionne pas correctement. Si le problème que vous éprouvez ne figure pas ci-dessous ou si les instructions ci-dessous ne vous aident pas, éteignez le produit, débranchez le cordon d’alimentation et communiquez avec Samsung Electronics en composant 1-800-SAMSUNG. Symptôme Vérification/Résolution Je ne peux pas éjecter le disque. • Le cordon d’alimentation a-t-il été solidement branché dans la prise? • Coupez l’alimentation et rétablissez-la. La lecture ne commence pas. • Vérifiez le numéro de région du disque Blu-ray/DVD. Les disques Blu-ray/DVD achetés à l’étranger pourraient ne pas être lus. • Les CD-ROM et les DVD-ROM ne peuvent pas être lus sur ce produit. • Assurez-vous que le niveau de classement est correct. La lecture ne commence pas immédiatement lorsque la touche Lecture/ Pause est pressée. • Utilisez-vous un disque déformé ou dont la surface est éraflée? • Nettoyez le disque en l’essuyant. Aucun son n’est émis. • Le cinéma maison n'émet pas de son pendant la lecture accélérée, au ralenti ou image par image. • Les enceintes sont-elles connectées correctement? La configuration de l’enceinte est-elle correctement personnalisée? • Le disque est-il sérieusement endommagé? Le son est uniquement produit par quelques enceintes, pas par les 8. • Avec certains disques Blu-ray/DVD, le son est produit uniquement par les enceintes avant. • Vérifiez si les enceintes sont connectées correctement. • Réglez le volume. • Pendant l’écoute d'un CD, de la radio ou de la télévision, l'unité restitue le son uniquement par les enceintes avant. Le son ambiophonique Dolby Digital 7,1 CH n’est pas produit. • La marque « Dolby Digital 7,1 CH » est-elle apposée sur le disque? Le son ambiophonique Dolby Digital 7,1 CH est produit uniquement si le disque a été enregistré avec un son 7,1 canaux. • La langue audio est-elle correctement définie à Dolby Digital 7,1-CH dans l’affichage de l’information? La télécommande ne fonctionne pas. • Utilisez-vous la télécommande dans les limites de la distance opérationnelle et dans l’angle approprié par rapport au capteur? • Les piles sont-elles épuisées? • Avez-vous sélectionné correctement les fonctions de mode (TV/BD) de la télécommande (TV ou BD)? • Le disque tourne mais aucune image n’est produite. • La qualité de l’image est mauvaise et l’image tremble. • • • • La langue de l’audio et les sous-titres ne fonctionnent pas. • La langue de l’audio et les sous-titres ne fonctionnent pas si le disque ne les comprend pas. Le téléviseur est-il allumé? Les câbles vidéo sont-ils connectés correctement? Le disque est-il sale ou endommagé? Un disque dont la fabrication est de mauvaise qualité pourrait ne pas être lu. | 56 Français HT-F9730W_ZC_FRC-0814.indd 56 2013-08-14 오후 1:12:39 Symptôme Vérification/Résolution • Utilisez-vous un disque qui ne contient pas de menus? Le format d’image ne peut pas être modifié. • Le produit peut lire les disques 16:9 Blu-ray/DVD en mode 16:9 plein écr., 4:3 panoramique ou 4:3 plein écran, mais il ne peut lire les disques 4:3 Blu-ray/DVD qu’en format d’image 4:3. Reportez-vous à la pochette du disque Blu-ray, puis sélectionnez la fonction appropriée. • Le produit ne fonctionne pas. (Exemple : L'alimentation se coupe ou un bruit étrange est émis.) • Le produit ne fonctionne pas normalement. • Appuyez sur la touche 5 de la télécommande et maintenez-la enfoncée pendant 5 secondes en mode VEILLE. Cela réinitialisera l’unité. - L’utilisation de la fonction RÉINITIALISER effacera tous les paramètres stockés. Ne l’utilisez pas si cela n’est pas nécessaire. Vous avez oublié le mot de passe pour le niveau de classement. • Alors que le produit ne contient pas de disque, appuyez sur la touche 5 du produit pendant plus de 5 secondes. INIT apparaît dans l'affichage et tous les paramètres reviennent à leurs valeurs par défaut. Ensuite, appuyez sur le touche de MARCHE/ARRÊT. - L’utilisation de la fonction RÉINITIALISER effacera tous les paramètres stockés. Ne l’utilisez pas si cela n’est pas nécessaire. Impossible de recevoir les émissions de radio. • L’antenne est-elle connectée correctement? • Si le signal d’entrée de l’antenne est faible, installez l’antenne FM externe à un endroit où la réception est bonne. Aucun son n’est émis lors de l’écoute de l’audio du téléviseur par le produit. • Si le touche OUVRIR/FERMER ^ est pressé pendant l’écoute de l’audio TV à l’aide des fonctions D. IN ou AUX, les fonctions du disque Blu-ray/DVD sont activées et le son du téléviseur est coupé. « Non disponible » apparaît à l’écran. • Les fonctions ou les actions ne peuvent pas être exécutées pour le moment pour les raisons suivantes : 1. Le logiciel du disque Blu-ray/DVD empêche l’exécution. 2. Le logiciel du disque Blu-ray/DVD ne prend pas en charge la fonction (p.ex., angles). 3. La fonction n’est pas disponible pour le moment. 4. Vous avez demandé un numéro de titre ou de chapitre ou un temps de recherche hors plage. Si la sortie HDMI est définie à une résolution que votre téléviseur ne peut pas prendre en charge (par exemple 1080p), il se peut qu'aucune image n'apparaisse à l'écran. • Appuyez pendant plus de 5 secondes sur le touche 5 situé sur la face avant du lecteur, lequel ne doit pas contenir de disque. Tous les paramètres reviennent aux valeurs par défaut définies à l’usine. Aucune sortie HDMI • Vérifiez la connexion entre le téléviseur et la prise HDMI du lecteur. • Vérifiez si votre téléviseur prend en charge la résolution d’entrée HDMI 480p, 720p, 1080i, 1080p. Écran de sortie HDMI anormal. • Si des parasites apparaissent à l’écran, cela signifie que le téléviseur ne prend pas en charge la HDCP (High-bandwidth Digital Content Protection) (protection de contenu numérique à large bande passante). 07 L’écran des menus n’apparaît pas, même lorsque la fonction du menu est sélectionnée. HT-F9730W_ZC_FRC-0814.indd 57 Annexe Français 57 | 2013-08-14 오후 1:12:40 Annexe Symptôme Vérification/Résolution Fonction AllShare Les dossiers partagés sont visibles au moyen de AllShare, mais pas les fichiers. • AllShare affiche seulement les fichiers Vidéos, Photos et Musique. Les autres types de fichiers ne sont pas affichés. Les fichiers vidéo sont lus par intermittence • Vérifiez si le réseau est stable. • Vérifiez si le câble réseau est connecté correctement et si le réseau n’est pas surchargé. • La connexion sans fil entre le périphérique compatible DLNA et le produit est instable. Vérifiez la connexion. La connexion AllShare entre le produit et l’ordinateur est instable. • L’adresse IP sous le même sous-réseau doit être unique sinon, la collision IP peut entraîner ce problème. • Vérifiez si votre pare-feu est activé. Si c’est le cas, désactivez le pare-feu. BD-LIVE Impossible d’établir la connexion au serveur BDLIVE. • Essayez d’établir la connexion au serveur en utilisant la fonction État du réseau. • Vérifiez si le périphérique USB est connecté au produit. • Le périphérique de stockage doit disposer au minimum de 1 Go d’espace libre pour pouvoir prendre en charge le service BD-LIVE. Vous pouvez vérifier l’espace libre dans Gestion des données BD. (Voir page 52.) • Vérifiez si l’option Connexion Internet BD-LIVE est réglée à Permettre tout. • Si toutes ces tentatives échouent, communiquez avec le fournisseur du contenu ou mettez à niveau au micrologiciel de la version la plus récente. Une erreur se produit lors de l’utilisation du service BD-LIVE. • Le périphérique de stockage USB doit disposer au minimum de 1 Go d’espace libre pour pouvoir prendre en charge les services BD-LIVE. Vous pouvez vérifier l’espace libre dans Gestion des données BD. (Voir page 52.) | REMARQUE | Si les paramètres par défaut sont rétablis, toutes les données utilisateur stockées dans les données BD sont supprimées. | 58 Français HT-F9730W_ZC_FRC-0814.indd 58 2013-08-14 오후 1:12:40 Caractéristiques techniques HDMI 16,92 (L) x 2,16 (H) x 12,38 (P) po Plage de températures d’utilisation +41°F à +95°F Plage de taux d’humidité d’utilisation 10 % à 75 % Rapport signal/bruit 55 dB Sensibilité utilisable 12 dB Distorsion harmonique totale 0,5 % Vidéo 2D : 2160p, 1080p, 1080i, 720p, 480p 3D : 1080p, 720p Annexe Syntoniseur FM 7,2 Ibs Dimensions 07 Général Poids Audio Audio PCM multicanal, audio Bitstream, audio PCM Sortie enceinte avant 165W x 2 (3) Sortie enceinte avant supérieure 165W x 2 (3) Sortie enceinte centrale 170W (3) Sortie enceinte ambiophonique 165W x 2 (3) Amplificateur Sortie caisson des basses Courbe de résonnance 170W (3) Entrée analogique : 20Hz - 20kHz (±3 dB) Entrée numérique : 20Hz - 40kHz (±4 dB) Rapport signal/bruit 70 dB Séparation des canaux 60 dB Sensibilité d’entrée (AUX) 500mV Enceinte (Système d’enceinte 7,1 canaux) Système d’enceinte Gamme de fréquences Impédance Niveau de Entrée Entrée pression sonore nominale maximum de sortie Avant/Avant supérieure 140Hz - 20kHz Ambiophonique 87dB/W/M 165W 330W 3 Centrale Caisson des basses • • • • 40Hz - 160Hz 88dB/W/M 170W 340W Dimensions (L x H x P) (Unité : po) Poids (Unité : Ib) 3,5 x 51,2 x 2,7 (Base du pied : 9,8 x 9,8) 16,87 3,5 x 5,5 x 2,7 1,43 10,5 x 4,0 x 2,8 1,92 8,0 x 15,3 x 13,8 13,96 Samsung Electronics Co., Ltd se réserve le droit de changer les spécifications sans préavis. Les poids et les dimensions sont approximatifs. Cette conception et ces spécifications techniques sont susceptibles d'être modifiées sans préavis. Pour l’alimentation électrique et la consommation d'électricité, veuillez vous reporter à l’étiquette apposée sur le produit. SWA-6000 Poids 2.52 lbs Sortie 165W x 2 CH Dimensions (L x H x P) 3 x 9 x 6 po Gamme de fréquences 20Hz~20KHz Plage de températures d’utilisation +41°F à +95°F Rapport signal/bruit 65dB Plage de taux d’humidité d’utilisation 10% ~ 75% Français HT-F9730W_ZC_FRC-0814.indd 59 59 | 2013-08-14 오후 1:12:41 GARANTIE LIMITÉE DE L’ACHETEUR INITIAL Samsung Electronics Canada Inc. (SECA) garantit ce produit contre les vices de matériau(x) et de fabrication. Si l'appareil ne fonctionne pas convenablement durant la période de garantie et que son mauvais fonctionnement est dû à un défaut de matériau(x) ou de fabrication, SECA réparera ou remplacera, à sa seule discrétion, l'appareil défectueux. Toutes les réparations sous garantie doivent être effectuées par un centre de service autorisé SECA. Vous pouvez obtenir le nom et l'adresse du centre de service le plus près de chez vous en composant sans frais le 1 800 SAMSUNG. Main-d’oeuvre Pièces un (1) an (au comptoir) un (1) an Pour toute réparation de modèle portatif dans un centre de service, le client est responsable du transport aller-retour de l'appareil. Le client doit conserver le reçu original sur lequel la date d'achat est indiquée, car il s'agit de la seule preuve d'achat acceptée. Le client doit présenter ce reçu au centre de service au moment où il fait la demande de réparation sous garantie. EXCLUSIONS (CE QUI N’EST PAS COUVERT) Cette garantie ne couvre pas les dommages causés par un accident, un incendie, une inondation et/ ou tout cas de force majeure. Elle ne couvre pas non plus les dommages causés par une mauvaise utilisation, un branchement à une tension inappropriée, une mauvaise installation, une réparation inappropriée ou non autorisée, une utilisation commerciale, ni les dommages survenus lors du transport. Le fini extérieur et intérieur, les ampoules et les pièces en verre ne sont pas couverts par cette garantie. Les réglages expliqués dans le manuel et effectués par le client ne sont pas couverts par cette garantie. Cette garantie est automatiquement annulée si le numéro de série imprimé sur l'appareil a été effacé ou modifié. La garantie ne couvre que les produits achetés et utilisés au Canada. SIÈGE SOCIAL SAMSUNG ELECTRONIQUE CANADA INC., SERVICE À LA CLIENTÈLE 55 STANDISH COURT MISSISSAUGA, ONTARIO L5R 4B2 CANADA FABRIQUÉ EN CORÉE 1 800 SAMSUNG (1 800 726-7864) WWW.SAMSUNG.COM/CA HT-F9730W_ZC_FRC-0814.indd 60 2013-08-14 오후 1:12:42 SIÈGE SOCIAL SAMSUNG ELECTRONIQUE CANADA INC., 55 STANDISH COURT MISSISSAUGA, ONTARIO L5R 4B2 CANADA TEL: 1-800-SAMSUNG (1-800-726-7864) WWW.SAMSUNG.COM/CA Contacter SAMSUNG À TRAVERS LE MONDE Si vous avez des questions ou commentaires concernant les produits Samsung, veuillez communiquer avec le service à la clientèle SAMSUNG. Contact Center Area Web Site Area Contact Center Web Site ` North America CANADA 1-800-SAMSUNG (726-7864) U.S.A 1-800-SAMSUNG (726-7864) ` Latin America MEXICO 01-800-SAMSUNG(726-7864) ARGENTINE 0800-333-3733 URUGUAY 000-405-437-33 PARAGUAY 009-800-542-0001 0800-124-421 (Demais cidades e regiões) BRAZIL 4004-0000 (Capitais e grandes centros) 800-SAMSUNG (726-7864) CHILE From mobile 02-24 82 82 00 BOLIVIA 800-10-7260 01-8000 112 112 COLOMBIA Bogotá: 600 12 72 COSTA RICA 0-800-507-7267 DOMINICA 1-800-751-2676 www.samsung.com/ca (English) www.samsung.com/ ca_fr (French) www.samsung.com/us ECUADOR 1-800-10-7267 EL SALVADOR 800-6225 www.samsung.com www.samsung.com.ar www.samsung.com www.samsung.com.py GUATEMALA 1-800-299-0013 www.samsung.com.br HONDURAS 800-27919267 JAMAICA 1-800-234-7267 NICARAGUA 001-800-5077267 PANAMA 800-7267 www.samsung.com/cl www.samsung.com www.samsung.com/ latin (Spanish) www.samsung.com/ latin_en (English) www.samsung.com/ latin (Spanish) www.samsung.com/ latin_en (English) www.samsung.com/ latin (Spanish) www.samsung.com/ latin_en (English) www.samsung.com/ latin (Spanish) www.samsung.com/ latin_en (English) www.samsung.com www.samsung.com/ latin (Spanish) www.samsung.com/ latin_en (English) www.samsung.com/ latin (Spanish) www.samsung.com/ latin_en (English) www.samsung.com/co www.samsung.com/ latin (Spanish) www.samsung.com/ latin_en (English) www.samsung.com/ latin (Spanish) www.samsung.com/ latin_en (English) 0-800-777-08 (Only from landline) 336-8686 (From HHP & landline) PUERTO RICO 1-800-682-3180 TRINIDAD & 1-800-SAMSUNG (726-7864) TOBAGO VENEZUELA 0-800-100-5303 PERU www.samsung.com/pe www.samsung.com www.samsung.com www.samsung.com/ve AH68-02630B-01 HT-F9730W_ZC_FRC-0924.indd 61 2013-09-24 1:35:26
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement