Pentax Camcorder WG-10 Operating Manual

Digital Camera
Operating Manual
To ensure the best performance from your camera, please read
the Operating Manual before using the camera.
Thank you for purchasing this PENTAX WG-10.
Please read this manual before using the camera in order to get the most
out of all the features and functions. Keep this manual safe, as it can be
a valuable tool in helping you to understand all the camera’s capabilities.
Regarding copyrights
Images taken using the PENTAX Digital Camera that are for anything other than
personal enjoyment cannot be used without permission according to the rights as
specified in the Copyright Act. Please take care, as there are cases where
limitations are placed on taking pictures even for personal enjoyment during
demonstrations, performances or of items on display. Images taken with the
purpose of obtaining copyrights also cannot be used outside the scope of use of
the copyright as laid out in the Copyright Act, and care should be taken here also.
Regarding trademarks
• SDXC Logo is a trademark of SD-3C, LLC.
• Windows and Windows Vista are registered trademarks of Microsoft
Corporation in the United States of America and other countries.
• Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and
other countries.
• ArcSoft®, and its logo are either the registered trademark or trademark of
ArcSoft Inc. in the United States and/or other countries.
• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing, LLC in the United States and/or
other countries.
• Eye-Fi, the Eye-Fi logo, and Eye-Fi connected are trademarks of Eye-Fi, Inc.
• Intel, Intel Core and Pentium are trademarks of Intel Corporation in the U.S.
and/or other countries.
• AMD, AMD Athlon and ATI Radeon are trademarks or registered trademarks of
Advanced Micro Devices, Inc.
• NVIDIA and GeForce are trademarks and/or registered trademarks of NVIDIA
Corporation in the U.S. and/or other countries.
• This product supports PRINT Image Matching III. PRINT Image Matching
enabled digital still cameras, printers and software help photographers to
produce images more faithful to their intentions. Some functions are not
available on printers that are not PRINT Image Matching III compliant.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved.
PRINT Image Matching is a trademark of Seiko Epson Corporation. The PRINT
Image Matching logo is a trademark of Seiko Epson Corporation.
• All other trademarks are the property of their respective owners.
Regarding Product Registration
In order to better serve you, we request that you complete the product
registration, which can be found on the CD-ROM supplied with the camera or on
the PENTAX website. Thank you for your cooperation.
Refer to “Product Registration on the Internet” (p.246) for more information.
To users of this camera
• Do not use or store this device in the vicinity of equipment that generates strong
electromagnetic radiation or magnetic fields.
Strong static charges or the magnetic fields produced by equipment such as
radio transmitters could interfere with the monitor, damage the stored data, or
affect the product’s internal circuitry and cause camera misoperation.
• The liquid crystal panel used in the display is manufactured using extremely
high precision technology. Although the level of functioning pixels is 99.99% or
better, you should be aware that 0.01% or fewer of the pixels may not illuminate
or may illuminate when they should not. However, this has no effect on the
recorded image.
• A band of light may appear on the display if the camera is aimed at a bright
subject. This is known as a smear, but it is not a malfunction.
• There is a possibility that the illustrations and the display screen in this manual
are different from the actual product.
• In this manual, SD Memory Cards, SDHC Memory Cards and SDXC Memory
Cards are referred to as SD Memory Cards.
• In this manual, the generic term “computer(s)” refers to either a Windows PC or
a Macintosh hereafter.
• In this manual, the term “battery(ies)” refers to any type of batteries used for this
camera and accessories.
Using Your Camera Safely
We have paid close attention to the safety of this product. When
using this product, we request your special attention regarding
items marked with the following symbols.
Warning This symbol indicates that violating this item
could cause serious personal injuries.
Caution
This symbol indicates that violating this item
could cause minor or medium personal injuries,
or loss of property.
1
About the Camera
Warning
• Do not attempt to take the camera apart or modify the camera. High
voltages are present within the camera, and there is a danger of electric
shock if the camera is taken apart.
• If the inside of the camera should become exposed as a result of, for
example, the camera being dropped, please do not under any
circumstances touch such exposed portions, as there is a danger of
receiving an electric shock.
• Wrapping the strap of the camera around your neck is also dangerous.
Please take care that small children do not hang the strap around their
necks.
• If any irregularities occur during use, such as smoke or a strange odor, stop
use immediately, remove the battery or the AC adapter, and contact your
nearest PENTAX Service Center. Continuing to use the product can cause
a fire or electric shock.
Caution
• Do not place your finger on the flash when it is discharging as there is a
risk of burns.
• Do not discharge the flash while it is touching your clothing as there is a
risk of discoloring.
• Some portions of the camera heat up during use, so please take care, as
there is a risk of low temperature burns if such portions are held for long
periods of time.
• Should the LCD be damaged, be careful of glass fragments. Also, be
careful not to allow the liquid crystal to get on your skin, in your eyes, or in
your mouth.
• Depending on your individual factors or physical condition, the use of the
camera may cause itching, rashes or blisters. In case of any abnormality,
stop using the camera and get medical attention immediately.
2
About the Battery Charger and the AC Adapter
Warning
• Always use the battery charger and AC adapter exclusively developed for
this product, with the specified power and voltage. Using a battery charger
or AC adapter not exclusive to this product, or using the exclusive battery
charger or AC adapter with an unspecified power or voltage can cause a
fire, electric shock, or camera breakdown. The specified voltage is 100240V AC.
• Do not disassemble or modify the product. This can cause a fire or electric
shock.
• If the generation of smoke or strange odor from the product or other
abnormality occurs, immediately discontinue its use and consult a
PENTAX Service Center. Continuing to use the product can cause a fire or
electric shock.
• If water should happen to get inside the product, consult a PENTAX
Service Center. Continuing to use the product can cause a fire or electric
shock.
• If a thunder storm should occur while using the battery charger or AC
adapter, unplug the AC plug cord and discontinue use. Continuing to use
the product can cause damage to the equipment, fire, or electric shock.
• Wipe off the plug of the AC plug cord if it becomes covered with dust. Dust
on the plug may cause a fire.
Caution
• Do not place heavy objects on the AC plug cord, allow heavy objects to
drop onto it or allow the AC plug cord to become damaged due to
excessive bending. If the AC plug cord becomes damaged, consult a
PENTAX Service Center.
• Do not short or touch the output terminals of the product while it is still
plugged in.
• Do not plug in the AC plug cord with wet hands. This can cause an electric
shock.
• Do not subject the product to strong impacts or allow it to drop onto a hard
surface. This can cause a malfunction.
• Do not use the battery charger to charge a battery other than a
rechargeable lithium-ion battery D-LI92. This can cause overheating,
explosion, or battery charger failure.
3
• To reduce the risk of hazards, use only a CSA/UL certified power supply cord
set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end
with a molded-on male attachment plug cap (with a specified NEMA
configuration), and the other is provided with a molded-on female connector
body (with a specified IEC nonindustrial type configuration) or the equivalent.
About the Battery
Warning
• Be sure to store the battery out of the reach of small children. Placing it in
their mouths may cause an electric shock.
• If any leakage from the battery should come in contact with your eyes, it
may cause a loss of sight. Flush your eyes with clean water and get
medical attention immediately. Do not rub them.
Caution
• Only use the specified battery with this camera. Use of other batteries may
cause an explosion or fire.
• Do not disassemble the battery. Disassembling the battery may cause an
explosion or leakage.
• Remove the battery from the camera immediately if it becomes hot or
begins to smoke. Be careful not to burn yourself during removal.
• Keep wires, hairpins, and other metal objects away from the + and contacts of the battery.
• Do not short the battery or dispose of the battery in fire. This can cause an
explosion or fire.
• If any leakage from the battery should come in contact with skin or clothes, it
may cause irritation to the skin. Wash the affected areas thoroughly with water.
• Precautions for D-LI92 Battery Usage:
BATTERY MAY EXPLODE OR FIRE IF MISTREATED.
- DO NOT DISASSEMBLE OR DISPOSE OF IN FIRE.
- DO NOT CHARGE EXCEPT SPECIFIED CHARGING CONDITION.
- DO NOT HEAT ABOVE 140°F / 60°C, OR SHORT CIRCUIT.
- DO NOT CRUSH OR MODIFY.
4
Keep the Camera and Accessories Out of the Reach of Small
Children
Warning
• Be sure to keep the camera and its accessories out of the reach of small
children.
1. Injuries may result from the product falling or from unexpected
movement.
2. Suffocation may result from wrapping the strap around the neck.
3. Small accessories such as battery or an SD Memory Card may be
swallowed. Seek medical attention immediately if an accessory is
accidentally swallowed.
Care to be Taken During Handling
Before Starting Use
• When traveling, take the Worldwide Service Network listing that is included
in the package. This will be useful if you experience problems abroad.
• When the camera has not been used for a long time, confirm that it is still
working properly, particularly prior to taking important pictures (such as at
a wedding or when traveling). Contents of the recording cannot be
guaranteed if recording, playback or transferring your data to a computer,
etc. is not possible due to a malfunction of your camera or recording media
(SD Memory Card), etc.
• The lens on this camera is not interchangeable. The lens is not removable.
About the Battery and Battery Charger
• Storing the battery fully charged may decrease the battery performance.
Avoid storing it especially in high temperatures.
• If the battery is left inserted and the camera is not used for a long time, the
battery will over-discharge and shorten the battery’s service life.
• Charging the battery a day before use or on the day of use is recommended.
• The AC plug cord supplied with the camera is for exclusive use with the
battery charger D-BC92. Do not use it with any other equipment.
5
Cautions when Carrying and Using the Camera
• Hot and humid places should be avoided. Particular care should be taken
regarding vehicles, which can become very hot inside.
• Ensure that the camera is not subjected to substantial vibrations, shocks,
or pressure as this may cause damage, malfunction, or a loss in waterproof
performance. Place the camera on a cushion for protection when the
camera is subjected to the vibrations of a motorbike, car, ship, etc. If the
camera is subjected to substantial vibrations, shocks, or pressure, take
your camera to your nearest PENTAX Service Center and have it checked.
• The temperature range in which the camera can be used is -10°C to 40°C
(14°F to 104°F).
• The liquid crystal display will become black at high temperatures but will
return to normal at normal temperatures.
• The response speed of the liquid crystal display becomes slow at low
temperatures. This is due to the properties of the liquid crystal and is not a
malfunction.
• If the camera is subjected to rapid temperature changes, condensation
may form on the inside and outside of the camera. Therefore put the
camera in a bag or plastic bag and take the camera out when the difference
in temperature has subsided.
• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salts.
These could cause the camera to breakdown. Wipe the camera to dry off
any rain or water drops.
• Please do not press forcefully on the display. This could cause it to break
or malfunction.
• Be careful not to sit down with the camera in your back pocket as this may
damage the exterior of the camera or the display.
• When using a tripod with the camera, be careful not to overtighten the
screw in the tripod socket on the camera.
About Repairs
• Do not clean the product with organic solvents such as thinner, alcohol or
benzene.
• Use a lens brush to remove dust accumulated on the lens. Never use a
spray blower for cleaning as it may damage the lens.
6
About Storage
• Avoid storing the camera where pesticides and chemicals are handled.
Remove the camera from its case and store it in a well-ventilated place to
prevent the camera from becoming moldy during storage.
• Avoid using or storing the camera where it may be exposed to static
electricity or electrical interference.
• Avoid using or storing the camera in direct sunlight or in locations where it
may be exposed to rapid changes in temperature or to condensation.
• Periodic checks are recommended every 1 to 2 years in order to maintain
high performance.
Others
• The SD Memory Card is equipped with a
write-protect switch. Setting the switch to
LOCK prevents new data from being
recorded on the card, the stored data from
being deleted, and the card from being
Write-protect
formatted by the camera or computer.
switch
r appears on the display when the card is
write-protected.
• Care should be taken when removing the SD Memory Card immediately
after using the camera, as the card may be hot.
• Keep the battery/card cover closed and do not remove the SD Memory
Card or turn the camera off while the data is being played back or saved to
the card, or the camera is connected to a computer with the USB cable, as
this may cause the data to be lost or the card to be damaged.
• Do not bend the SD Memory Card or subject it to violent impact. Keep it
away from water and store away from high temperature.
• Do not remove the SD Memory Card during formatting as this may damage
the card and render it unusable.
• The data on the SD Memory Card may be lost in the following
circumstances. We do not accept any liability for data that is deleted
(1) when the SD Memory Card is mishandled by the user.
(2) when the SD Memory Card is exposed to static electricity or electrical
interference.
(3) when the SD Memory Card has not been used for a long time.
(4) when the SD Memory Card is ejected or the batteries are removed
while the card is being accessed.
7
• If it is not used for a long time, the data on the card may become
unreadable. Be sure to regularly make a backup of important data on a
computer.
• Be sure to format SD Memory Cards that are unused or have been used
on another camera. Refer to “Formatting the Memory” (p.214).
• Please note that deleting data, or formatting the SD Memory Cards or the
built-in memory does not completely erase the original data. Deleted files
can sometimes be recovered using commercially available software. It is
user’s responsibility to ensure the privacy of such data.
8
Regarding Waterproof, Dustproof, and
Shockproof Design
• This camera is provided with a waterproof/dustproof design complying with
JIS waterproof grade 8 and JIS dustproof grade 6 (equivalent to IP68).
• The camera satisfies the PENTAX drop test (1.5 m height onto a 5 cm thick
plywood surface) complying with MIL-Standard 810F Method 516.5-Shock
testing.
• The camera satisfies the PENTAX test for the waterproof, dustproof, and
shockproof performance, but this does not guarantee it will remain free of
trouble or damages.
• Waterproof performance is not guaranteed if the camera is exposed to
impact such as being dropped or hit.
Precautions Before Using the Camera in the
Water
Check the Following Before Going Near the Water
• Make sure that there are no cracks or scratches on the rubber seal of the
battery/card and terminal covers.
Packing contact surface
Packing contact surface
Waterproof packing
Waterproof packing
• Make sure there are no foreign objects (dust, sand, hair, lint or liquid) on
the rubber seals or the surface they contact before closing the battery/card
and terminal covers. Wipe off any foreign objects with a clean lint-free cloth.
9
• Close the battery/card and terminal covers properly until they click.
Otherwise water may get in and damage the camera.
Be Careful Near the Water
• Avoid opening the battery/card and terminal covers when near the
waterside or with wet hands. Wait until the camera is completely dry before
changing the battery or the SD Memory Card. Avoid changing the battery
or card where the camera is likely to get wet or dirty, and make sure that
your hands are dry.
• The camera will sink if dropped in water, so be sure to attach the strap and
slip the strap over your wrist when using the camera in or near water.
• To enhance the waterproof performance of the camera, the front of the lens
is protected by glass. As any dirt or water on the glass will affect the quality
of pictures taken, the glass should be kept clean at all times.
Precautions When Using the Camera in the Water
• Do not use the camera deeper than 10 meters underwater. Do not use the
camera underwater for more than 120 minutes consecutively.
• Do not open the battery/card and terminal covers underwater.
• Do not use in hot water or in a hot spring.
• Do not apply excessive force to the camera, for example diving into water
with it. Doing so may compromise the waterproof performance of the
camera or cause the covers to open.
• Leaving the camera on the sand at the beach may cause the camera to
exceed its operating temperature or cause the speaker or microphone to
become blocked with sand.
• Avoid subjecting the camera to substantial vibrations, shocks, or pressure
as this may cause a loss in waterproof performance. If the camera is
subjected to substantial vibrations, shocks or pressure, take your camera
to your nearest PENTAX Service Center and have it checked.
• Avoid getting sunscreen or sun oil on the camera as it may cause
discoloration of the surface. If any oil gets on the camera, wash it off
immediately with warm water.
• Sudden and extreme changes in temperature may cause condensation to
form in and on the camera. Keep the camera in a bag or case to reduce the
difference in temperature.
10
Precautions After Using the Camera in the Water
• Do not open the battery/card cover or terminal cover if the camera is wet.
Wipe off any water with a clean lint-free cloth.
• The inside surface of the covers may get wet when they are opened. Wipe
off any water that is on the cover.
• Wiping off the camera while there is sand or dust on it may scratch the
surface of the camera. Make sure that the battery/card cover and terminal
cover are firmly closed before washing the camera in tap water. After
washing the camera, dry it with a soft cloth.
• Wipe off any dirt or sand on the waterproof packing or the packing contact
surface. The camera’s waterproof performance may be compromised by
loose packing or cracks or dents in the packing or packing contact surface.
If there is any such damage, contact your nearest PENTAX Service
Center.
• If the camera is very dirty or after it has been used in the sea, make sure
that it is turned off and the battery/card and terminal covers are firmly
closed before rinsing it under running tap water or leaving it in a bowl of
clean water for a short time (2 or 3 minutes).
• Avoid cleaning with agents such as soapy water, mild detergents, or
alcohol as this may compromise the waterproof performance of the
camera.
• To maintain the waterproof performance of the camera, you are
recommended to change the waterproof packing once a year. Contact your
nearest PENTAX Service Center regarding changing the packing. (A
charge will be made.)
• The camera’s accessories are not waterproof.
11
Contents
Using Your Camera Safely ...............................................................1
Care to be Taken During Handling ...................................................5
Regarding Waterproof, Dustproof, and Shockproof Design ............9
Precautions Before Using the Camera in the Water.........................9
Precautions When Using the Camera in the Water........................10
Precautions After Using the Camera in the Water..........................11
Contents .........................................................................................12
Composition of the Operating Manual ............................................ 19
Checking the Contents of the Package .......................................... 20
Names of Parts............................................................................... 21
Names of Operating Parts .............................................................. 22
Monitor Indications ......................................................................... 23
Getting Started
32
Attaching the Strap............................................................................. 32
Attaching the Strap ......................................................................... 32
Powering the Camera ......................................................................... 33
Charging the Battery....................................................................... 33
Installing the Battery ....................................................................... 34
Using the AC Adapter..................................................................... 38
Installing the SD Memory Card.......................................................... 40
Number of Images Recordable on an SD Memory Card................ 42
Turning the Camera On and Off ........................................................ 43
Starting-up in the Playback Mode...................................................44
Initial Settings .....................................................................................45
Setting the Display Language.........................................................45
Setting the Date and Time.............................................................. 49
Common Operations
52
Understanding the Button Functions ...............................................52
A Mode .........................................................................................52
Q Mode ........................................................................................ 54
Switching Between A Mode and Q Mode................................... 56
Setting the Camera Functions ........................................................... 57
Operating the Menus ......................................................................57
Menu List ........................................................................................ 61
12
Taking Pictures
65
Taking Still Pictures............................................................................65
Taking Pictures............................................................................... 65
Setting the Shooting Mode ............................................................. 69
Using the Face Detection Function ................................................ 71
Taking Pictures Automatically (Auto Picture Mode) ....................... 75
Setting the Functions (Program Mode)...........................................76
Taking Pictures in the Basic Mode (Green Mode)..........................77
Using the Zoom ..............................................................................79
Taking Pictures of Dark Scenes
(Night Scene, Night Scene Portrait, Digital SR, Fireworks, and
Candlelight Modes) ..................................................................81
Taking Pictures of People (Portrait Mode)...................................... 83
Taking Pictures of Children (Kids Mode) ........................................ 84
Taking Pictures of Your Pet (Pet Mode) ......................................... 85
Taking Pictures of Sports and Leisure Activities
(Surf & Snow/Sport Mode) .......................................................88
Taking Pictures of Text (Text Mode) .............................................. 89
Taking Pictures in Digital Microscope Mode................................... 90
Framing Your Pictures (Frame Composite Mode) ..........................92
Using the Self-timer ........................................................................94
Taking a Series of Pictures
(Continuous Shooting/Burst Shooting)..................................... 95
Taking Pictures Using the Remote Control Unit (Optional) ............ 97
Taking Pictures at a Set Interval (Interval Shoot) ........................... 99
Taking Pictures with Automatic Exposure Adjustment
(Auto Bracketing) ................................................................... 101
Using the Digital Wide Function (Digital Wide Mode)................... 102
Taking Panoramic Pictures (Digital Panorama Mode).................. 105
13
Setting the Shooting Functions.......................................................108
Selecting the Flash Mode ............................................................. 108
Selecting the Focus Mode ............................................................ 110
Setting the Image Tone ................................................................115
Selecting the Number of Recorded Pixels.................................... 116
Selecting the Quality Level of Still Pictures ..................................118
Adjusting the White Balance......................................................... 119
Setting the AE Metering................................................................121
Setting the Sensitivity ................................................................... 122
Setting AUTO ISO Range............................................................. 123
Setting the Exposure (EV Compensation).................................... 124
Correcting the Brightness (D-Range Setting) ............................... 125
Setting Pixel Track SR..................................................................126
Setting the Interval Shooting ........................................................ 127
Setting Blink Detection ................................................................. 129
Setting the Instant Review............................................................ 130
Setting the Green Button ..............................................................130
Setting the Image Sharpness (Sharpness)................................... 134
Setting the Saturation/Tone Adjustment....................................... 135
Setting the Image Contrast (Contrast).......................................... 136
Setting the Date Imprint Function .................................................136
Setting the IQ Enhancer Processing ............................................ 137
Setting the Macro Light................................................................. 138
Taking Pictures Underwater ............................................................ 139
Taking Underwater Pictures
(Underwater Mode/Underwater Movie Mode) ........................139
Recording Movies ............................................................................. 141
Recording Movies......................................................................... 141
Selecting the Number of Recorded Pixels and
Frame Rate for Movies........................................................... 143
Setting the Movie SR (Movie Shake Reduction) Function............ 144
Recording a Movie from Pictures Taken at a Set Interval
(Interval Movie) ......................................................................145
Saving the Settings (Memory) ......................................................... 149
14
Playing Back and Deleting Images
151
Playing Back Images ........................................................................151
Playing Back Still Pictures ............................................................ 151
Playing Back a Movie ................................................................... 152
Multi-Image Display ......................................................................153
Using the Playback Function ........................................................ 155
Slideshow .....................................................................................158
Rotating the Image ....................................................................... 161
Zoom Playback............................................................................. 162
Zoom In on the Subject’s Face Automatically
(Face Close-up Playback)...................................................... 163
Deleting Images and Sound Files.................................................... 165
Deleting a Single Image/Sound File .............................................165
Deleting Selected Images and Sound Files..................................167
Deleting All Images and Sound Files............................................ 168
Protecting Images and Sound Files from Deletion (Protect) ........ 169
Connecting the Camera to AV Equipment...................................... 172
Connecting the Camera to a Video IN Jack ................................. 172
Connecting the Camera to an HDMI Terminal ............................. 174
Editing and Printing Images
176
Editing Images .................................................................................. 176
Changing the Image Size (Resize)...............................................176
Cropping Images ..........................................................................177
Processing Images to Make Faces Look Smaller ........................178
Using the Digital Filters................................................................. 180
Using the Ink Rubbing Filter ......................................................... 185
Creating a Collage Image............................................................. 186
Red-eye Compensation................................................................191
Adding a Frame (Frame Composite) ............................................ 192
Overlaying Your Original Frame on an Image ..............................195
Editing Movies .............................................................................. 200
Copying Images and Sound Files.................................................203
Setting the Printing Service (DPOF)................................................ 205
Printing a Single Image ................................................................205
Printing All Images........................................................................207
15
Recording and Playing Back Sound
208
Recording Sound (Voice Recording Mode).................................... 208
Setting Voice Recording ............................................................... 208
Recording Sounds ........................................................................209
Playing Back Sound ..................................................................... 210
Adding a Voice Memo to Images.....................................................212
Recording a Voice Memo ............................................................. 212
Playing Back a Voice Memo......................................................... 213
Settings
214
Camera Settings................................................................................ 214
Formatting the Memory ................................................................214
Changing the Sound Settings.......................................................215
Changing the Date and Time........................................................ 217
Setting the Alarm ..........................................................................219
Setting the World Time ................................................................. 221
Setting the Text Size on the Menu ...............................................224
Changing the Display Language .................................................. 225
Changing the System for Naming Folders.................................... 226
Changing the Video Output Format.............................................. 228
Selecting the HDMI Output Format .............................................. 229
Setting the Eye-Fi Communication ...............................................231
Adjusting the Brightness of the Display ........................................ 232
Using the Power Saving Function ................................................ 233
Setting Auto Power Off ................................................................. 234
Setting the Quick Zoom Function .................................................235
Setting the Guide Display ............................................................. 236
Perform Pixel Mapping ................................................................. 237
Changing the Start-up Screen ...................................................... 238
Resetting to Default Settings (Reset) ...........................................239
Displaying the Clock Mode ........................................................... 240
16
Connecting to a Computer
241
Connecting to a Computer............................................................... 241
Provided Software ........................................................................241
System Requirements ..................................................................242
Installing the Software ..................................................................244
Setting the USB Connection Mode...............................................247
Connecting to a Windows PC .......................................................... 249
Connecting the Camera and Your Windows PC ..........................249
Transferring Images ..................................................................... 250
Disconnecting the Camera from Your Windows PC..................... 253
Starting “MediaImpression 3.6.1 LE” ............................................ 254
Viewing Images ............................................................................256
Details on How to Use “MediaImpression 3.6.1 LE”..................... 257
Connecting to a Macintosh ..............................................................258
Connecting the Camera and Your Macintosh............................... 258
Transferring Images ..................................................................... 259
Disconnecting the Camera from Your Macintosh ......................... 260
Starting “MediaImpression 2.2 LE” ...............................................261
Viewing Images ............................................................................263
Details on How to Use “MediaImpression 2.2 LE”........................263
Transferring Images Using an Eye-Fi Card .................................... 264
Appendix
266
Functions Available for Each Shooting Mode................................266
Messages...........................................................................................269
Troubleshooting................................................................................ 271
Default Settings................................................................................. 273
List of World Time Cities..................................................................278
Main Specifications ..........................................................................279
Warranty Policy................................................................................. 284
Index................................................................................................... 289
17
In this manual, the method for operating the four-way controller is shown
in illustrations, such as in the one below.
2 or
or 4
5 or
3 or
The meanings of the symbols used in this Operating Manual are
explained below.
1
Indicates the reference page number for an explanation of the
related operation.
Indicates information that is useful to know.
Indicates precautions to be taken when operating the camera.
18
A Mode
This is the mode for taking still pictures and recording movies. In
this manual, "Still Picture Capture Mode" is the mode for taking
still pictures.
Q Mode
This is the mode for viewing still pictures and playing back movies
and sound files.
Composition of the Operating Manual
This Operating Manual contains the following chapters.
1 Getting Started –––––––––––––––––––––––––––––––––––––––––
This chapter explains what you need to do after purchasing the camera
before you start taking pictures. Be sure to read it and follow the instructions.
2 Common Operations ––––––––––––––––––––––––––––––––––––
1
2
This chapter explains common operations such as the functions of the buttons and
how to use the menus. For more details, refer to the respective chapters below.
3 Taking Pictures ––––––––––––––––––––––––––––––––––––––––
This chapter explains the various ways of capturing images and how to set
the relevant functions.
4 Playing Back and Deleting Images–––––––––––––––––––––––––
This chapter explains how to view still pictures and movies on the camera or
on a TV and how to delete images, sound files, and movies from the camera.
5 Editing and Printing Images ––––––––––––––––––––––––––––––
This chapter explains the various ways of printing still pictures and how to
edit images with the camera.
3
4
5
6
6 Recording and Playing Back Sound –––––––––––––––––––––––
This chapter explains how to record sound files or add sound (a voice
memo) to an image and how to play back sound files.
7
7 Settings –––––––––––––––––––––––––––––––––––––––––––––––
This chapter explains how to set camera-related functions.
8 Connecting to a Computer –––––––––––––––––––––––––––––––
This chapter explains how to connect the camera to a computer, and includes
installation instructions and a general overview of the provided software.
9 Appendix––––––––––––––––––––––––––––––––––––––––––––––
8
9
This chapter deals with troubleshooting and lists the optional accessories.
19
Checking the Contents of the Package
Camera
PENTAX WG-10
Strap
O-ST104 (*)
Software (CD-ROM)
S-SW136
USB cable
I-USB7 (*)
Rechargeable lithium-ion
battery D-LI92 (*)
Battery charger
D-BC92 (*)
Operating Manual
(this manual)
Quick Guide
AC plug cord (*)
Macro stand
O-MS1
Items marked with an asterisk (*) are also available as optional accessories.
20
Names of Parts
Front
Power switch/Power lamp (green)
Shutter
release button
Lens (with guard glass)
Flash
Speaker/
Microphone
Remote control receiver
Self timer lamp/
Focus assist
Macro light
Back
Terminal cover
lock lever
Display
Terminal cover
Tripod socket
Battery/card cover
lock lever
Battery/card cover
PC/AV terminal
HDMI terminal
Battery lock lever
21
Names of Operating Parts
Power switch
Shutter release button
w/x/f/y button
Q button
I button
Four-way controller
4/W button
Green/i button
3 button
Refer to “Understanding the Button Functions” (p.52 - 55) for an
explanation of the function of each button.
Macro stand
Attaching the supplied macro stand (O-MS1) reduces camera shake during
shooting in Digital Microscope mode (p.90). Insert two clips above and below the
macro lights part. When attaching and detaching the macro stand, do not hold
the clip part.
* When using the macro stand, the camera may not be able to focus if the
objects have asperities.
22
Monitor Indications
Display in A Mode
The display changes in the following sequence each time you press the
4/W button: “Normal Display”, “Histogram + Info”, “No Info”,
“LCD Off”.
• All the camera buttons function as normal even when the LCD is off.
Press the shutter release button to take pictures as normal.
• Y appears if you press the shutter release button halfway when
camera shake is likely to occur. To prevent the camera from shaking,
use a tripod, a remote controller (optional) and/or the self-timer
function (p.94, p.97).
• You cannot turn off the LCD in N (Frame Composite), e (Pet) and
F (Digital Panorama) mode.
• You cannot change the information on the display by pressing the 4/
W button in 9 (Green) mode or X (Digital Wide) mode.
• In
(Digital Microscope) mode, the 4/W button only
switches between the Normal display and the No Info display.
Normal Display
Histogram + Info
OK
38
38
12M
14
AWB
ISO
200
OK
OK
OK
LCD Off
No Info
23
Normal Display in Still Picture Capture Mode
11 12 13 14 15
1
2
3
4
5
6
7
8
9
10
P
16
DATE
+1.0
1/250
F3.5
02/02/'13 14:25
38
17
18 19
1 Shooting mode (p.69)
2 Battery level indicator (p.37)
3 Face Detection icon (p.72)
4 Date Imprint setting (p.136)
5 EV Compensation (p.124)
6 Shutter speed
7 Aperture
8 Pixel Track SR icon (p.126)
9 Memory status (p.43)
10 Remaining image storage capacity
11 Flash mode (p.108)
12 Drive mode (p.94 - p.101)
13 Focus mode (p.110)
14 Eye-Fi communication status
(p.231)
15 Digital Zoom/Intelligent Zoom
icon (p.79)
16 Focus frame (p.65)
17 Date and time (p.49)
18 World Time setting (p.221)
19 D-Range Setting (p.125)
* 6 and 7 are only displayed when the shutter release button is pressed
half-way.
* For 8, M is displayed when Pixel Track SR is set to O (On) on the
[A Rec. Mode] menu. f is displayed when the shutter release
button is pressed halfway if Pixel Track SR is set to P (Off) and there
is a danger of camera shake.
* For 13, when the focus mode is set to = and the Auto Macro function
is activated, the q appears on the display (p.110).
24
* 14 changes as follows depending on the [Eye-Fi] setting in [W Setting]
menu.
During Eye-Fi communication. The camera is communicating or
searching for the access point when [Eye-Fi] is set to O (on).
Eye-Fi communication waiting. The camera is not communicating
when [Eye-Fi] is set to O (on).
Eye-Fi communication prohibited. [Eye-Fi] is set to P (off).
Eye-Fi version error. The version of the Eye-Fi card is out of date.
* 17 disappears two seconds after the camera is turned on.
* 19 depends on the [D-Range Setting] setting in the [A Rec. Mode]
menu.
P When [Highlight Correction] is set to O
Q When [Shadow Correction] is set to O
O When [Highlight Correction] and [Shadow Correction] are both
set to O
If [Highlight Correction] and [Shadow Correction] are both set to
P (Off), nothing appears in 19.
* Some indications may not appear depending on the shooting mode.
25
Histogram + Info/No Info Display in Still Picture Capture Mode
A1 to A21 and B3 appear when “Histogram + Info” is selected. Only B3
appears when “No Info” is selected.
A9 A10 A11 A12 A13
A1
A2
A3
A4
A5
B1
B2
A6
A7
A8
P
B3
DATE
+1.0
1/250
F3.5
38
A14
14M
AW
AWB
IS 200
ISO
20
A15
A16 A17 A18 A19 A20 A21
A1 Shooting mode (p.69)
A2 Battery level indicator (p.37)
A3 Face Detection icon (p.72)
A4 Date Imprint setting (p.136)
A5 EV Compensation (p.124)
A6 Pixel Track SR icon (p.126)
A7 Memory status (p.43)
A8 Remaining image storage capacity
A9 Flash mode (p.108)
A10 Drive mode (p.94 - p.101)
A11 Focus mode (p.110)
A12 Eye-Fi communication status (p.231)
A13 Digital Zoom/Intelligent Zoom icon
(p.79)
A14 Histogram (p.30)
A15 Sensitivity (p.122)
A16 World time setting
A17 D-Range Setting (p.125)
A18 Recorded pixels (p.116)
A19 Quality Level (p.118)
A20 White Balance (p.119)
A21 AE Metering (p.121)
B1 Shutter speed
B2 Aperture
B3 Focus frame (p.65)
* For A6, M is displayed when Pixel Track SR is set to O (On) on the
[A Rec. Mode] menu. f is displayed when the shutter release
button is pressed halfway if Pixel Track SR is set to P (Off) and there
is a danger of camera shake.
* On the No Info display, A6 is displayed for two seconds after turning
on the camera, setting the Pixel Track SR to ON, or turning the camera
to capture mode.
26
* A12 changes as follows depending on the [Eye-Fi] setting in
[W Setting] menu.
During Eye-Fi communication. The camera is communicating or
searching for the access point when [Eye-Fi] is set to O (on).
Eye-Fi communication waiting. The camera is not communicating
when [Eye-Fi] is set to O (on).
Eye-Fi communication prohibited. [Eye-Fi] is set to P (off).
Eye-Fi version error. The version of the Eye-Fi card is out of date.
* A17 depends on the [D-Range Setting] setting in the [A Rec. Mode]
menu.
P When [Highlight Correction] is set to O
Q When [Shadow Correction] is set to O
O When [Highlight Correction] and [Shadow Correction] are both
set to O
If [Highlight Correction] and [Shadow Correction] are both set to
P (Off), nothing appears in A17.
* B1 and B2 are only displayed when the shutter release button is
pressed half-way.
* When the shooting mode is b (Auto Picture) and if you press the
shutter release button halfway, the automatically selected shooting
mode appears in A1 even when “No Info” is selected (p.75).
* Some indications may not appear depending on the shooting mode.
* When there is an area on the screen that is overexposed it appears
white, the indicated area blinks red as a warning. Similarly, when there
is an area that is underexposed it appears black, the indicated area
blinks yellow as a warning.
27
Display in Q Mode
The display shows the shooting information of the image in the playback
mode. The display changes in the following sequence each time you
press the 4/W button:
The display cannot be changed by pressing the 4/W button
while playing back a voice memo/movie or pausing playback.
Normal Display
10 - 003
100
0038
Histogram + Info
10 - 0038
100
003
OK
1/250
F3.5
Edit
Edit
OK
AW
AWB
OK
Edit
No Info
28
14M
12M
IS 200
ISO
20
Histogram + Info Display in Playback Mode
(All of the display items are displayed here for explanatory purposes.)
The display shows information such as the shooting conditions. A1 to
A11 also appear when “Normal Display” is selected. B1 to B8 appear
only when “Histogram + Info” is selected.
A1
A2
A3
A4
A5
B1
B2
100 - 0038
1/250
F3.5
A6
A7
A8
A9
A10
A11
B3
Edit
14M
12M
12
B5
B6
A1 Face Detection icon (p.71)
A2 Playback mode
Q : Still Picture (p.151)
K : Movie (p.152)
L : Sound (p.210)
A3 Battery level indicator (p.37)
A4 Protect icon (p.169)
A5 Voice memo icon (p.213)
A6 Four-way controller guide
A7 File number
A8 Folder number (p.226)
A9 Memory status (p.43)
AWB
B7
ISO 200
B4
B8
A10 Eye-Fi communication status
(p.231)
A11 Volume icon
B1 Shutter speed
B2 Aperture
B3 Histogram (p.30)
B4 Sensitivity (p.122)
B5 Recorded pixels (p.116)
B6 Quality Level (p.118)
B7 White Balance (p.119)
B8 AE Metering (p.121)
* A1 appears only if the Face Detection function worked when the image
was shot.
* In “Normal Display”, A3 disappears if no operation is performed for two
seconds.
* A6 appears even when “No Info” is selected, but disappears if no
operation is performed for two seconds. When no operation is
performed for two seconds in “Normal Display” or “Histogram + Info”,
only “Edit” disappears.
29
* A11 appears only when the volume is being adjusted during playback
of movies, sounds, or voice memos (p.152, p.210, p.213).
* When “Normal Display” is selected, the current date and time appears
for two seconds in the B4 to B8 positions.
* When there is an area on the screen that is overexposed it appears
white, the indicated area blinks red. Similarly, when there is an area
that is underexposed it appears black, the indicated area blinks yellow.
Guide Display
A guide for each available button operation appears as follows on the
display during operation.
2
3
4
5
MENU
Four-way controller (2)
Four-way controller (3)
Four-way controller (4)
Four-way controller (5)
3 button
OK
SHUTTER
X, i
I, J
Zoom button
4/W button
Shutter release button
Green/i button
I button
Histogram
Number of pixels→
A histogram shows the
brightness distribution of an
image. The horizontal axis
represents brightness (dark at
the left and bright at the right)
and the vertical axis
represents the number of
pixels.
(Dark) ←Brightness→ (Bright)
The shape of the histogram
Dark portions
Bright portions
before and after shooting tells
you whether the brightness and contrast are correct or not, and lets you
decide if you need to use EV compensation and take the picture again.
Setting the Exposure (EV Compensation) 1p.124
30
Understanding Brightness
If the brightness is correct, the graph peaks in the middle. If the image is
underexposed, the peak is on the left side, and if it is overexposed, the
peak is on the right side.
Dark image
Correct image
Bright image
When the image is underexposed, the part to the left is cut off (dark
portions) and when the image is overexposed, the part to the right is cut
off (bright portions).
This camera has a function where overexposed areas are indicated as
blinking red and underexposed areas as blinking yellow.
Understanding Contrast
The graph peaks gradually for images in which contrast is balanced. The
graph peaks on both sides but sinks in the middle for images with a large
difference in contrast and low amounts of mid-level brightness.
31
Attaching the Strap
1
Attaching the Strap
Getting Started
Attach the strap (O-ST104) supplied with the camera.
1
2
32
Pass the narrow end of the strap through the strap lug.
Pass the other end of the strap through the loop and
pull tight.
1Getting Started
Powering the Camera
Charging the Battery
1
Getting Started
Use the supplied battery charger (D-BC92) to charge the supplied
rechargeable lithium-ion battery (D-LI92) before using it in the camera
for the first time or after a long period of non-use, or when the
[Battery depleted] message appears.
Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord,
rated 125 V, 7A, minimum 6 ft (1.8 m)”
Charging indicator
While charging: Lights
Charging finished: Turns off
3
2
To power outlet
Battery
Battery charger
1
2
3
1
AC plug cord
Connect the AC plug cord to the battery charger.
Plug the AC plug cord into the power outlet.
Place the battery in the battery charger so that the
PENTAX logo is facing up.
The charging indicator turns on while charging.
When charging is finished, the charging indicator turns off.
4
Remove the battery from the battery charger when
charging is finished.
33
• Do not charge batteries other than the rechargeable lithium ion D-LI92
battery using the supplied D-BC92 battery charger. Doing otherwise
may cause damage or overheating.
• The battery has reached the end of its service life when it starts to run
down soon after being charged. Replace it with a new battery.
• If the battery is inserted correctly but the charging indicator fails to
light, the battery may be faulty. Replace it with a new battery.
1
Getting Started
The time required to fully charge the battery is about 120 minutes (max.).
(The charging time may vary depending on the ambient temperature and
charging conditions.) The appropriate ambient temperature for charging
the battery is 0°C to 40°C (32°F to 104°F).
Installing the Battery
Use the rechargeable lithium-ion battery D-LI92 that is provided with the
camera. Charge the battery before using it in the camera for the first
time.
Battery lock lever
Battery/card cover
lock lever
Battery
1
Battery/card
cover
Open the battery/card cover.
Press the battery/card cover lock lever in the direction shown 1, slide
the cover towards 2 and open it towards 3.
34
2
Using the side of the battery to press the battery lock
lever in the direction of 4, insert the battery with the
PENTAX logo pointing toward the lens.
Push the battery in until it is locked in place.
3
Close the battery/card cover.
While lightly pressing the battery/card cover in the opposite direction
indicated by 2, slide the cover. The cover clicks to confirm that it is
securely closed.
Getting Started
Make sure that the battery is inserted with the PENTAX logo pointing
toward the lens. If the battery is incorrectly oriented, malfunction may
result.
1
Removing the Battery
1
2
Open the battery/card cover.
Press the battery lock lever towards 4.
The battery will be ejected. Take care not to drop the battery when
removing it.
35
1
Getting Started
36
• Do not use excessive force when sliding the battery/card cover open
and closed because the waterproof packing may peel off. If the
packing is not in the correct position, the camera will not be waterproof.
• If the battery/card cover is not locked securely when you close it,
water, sand, or dirt may get into the camera.
• This camera uses a rechargeable lithium-ion battery D-LI92. Use of
any other type of battery may damage the camera and cause
malfunction.
• Insert the battery correctly. If the battery is incorrectly oriented,
malfunction may result.
• Do not remove the battery while the camera is turned on.
• When storing the battery for more than 6 months, charge the battery
for 30 minutes using the battery charger and store the battery
separately.
Be sure to recharge the battery every 6 to 12 months. Storing the
battery below room temperature is ideal. Avoid storing it in high
temperatures.
• The date and time may be returned to the default setting if the camera
is left without the battery for a long time.
• Be careful as the camera or the battery may become hot when the
camera is used continuously for a long period of time.
• Allow the camera to dry completely before changing the battery. Avoid
changing the battery where the camera is likely to get wet or dirty, and
make sure that your hands are dry.
• Battery performance may deteriorate as temperature decreases.
When using the camera in cold regions, we recommend carrying a
spare battery in your pocket to keep it warm. Battery performance will
return to normal in normal temperatures.
• Image Storage Capacity, Movie Recording Time, Sound
Recording Time, and Playback Time
(at 23°C or 73.4°F with the display on and the battery fully charged)
Movie Recording
Time*2
Sound Recording
Time*2
Playback Time*2
Approx. 260 pictures
Approx. 120 min.
Approx. 350 min.
Approx. 280 min.
*1 Recording capacity shows approximate number of shots recorded
during CIPA-compliant testing (with display on, flash used for 50% of
the shots, and 23°C or 73.4°F). Actual performance may vary
according to operating conditions.
*2 According to the results of in-house testing.
1
Getting Started
Image Storage
Capacity*1
(flash used for 50% of
shots)
• In general, battery performance may temporarily deteriorate as the
temperature decreases.
• Be sure to take a spare battery with you when traveling abroad or to a
cold region, or if you intend to take a lot of pictures.
• Battery Level Indicator
You can check the battery level by the indicator on the display.
Screen Display
Battery Status
(green)
Adequate power remains.
(green)
Battery is running low.
(yellow)
Battery is running very low.
(red)
[Battery depleted]
Battery is exhausted.
The camera will turn off after this message appears.
37
Using the AC Adapter
1
Use of the optional AC adapter kit (K-AC117) is recommended if you
intend to use the camera for a long time or connect it to a computer.
Getting Started
1
6
3
5
DC terminal
4
DC coupler
1
2
Make sure that the camera is turned off and open the
battery/card cover.
Remove the Battery.
Refer to p.34 - p.35 on how to open the battery/card cover and remove
the battery.
3
Insert the DC coupler.
Using the side of the DC coupler to press the battery lock lever, insert
the DC coupler. Confirm that the DC coupler is locked in place.
The battery/card cover will not close while the DC coupler is inserted.
Leave the cover open when using the AC adapter and do not attempt
to close it.
4
5
6
38
Connect the DC terminal of the AC adapter to the DC
terminal of the DC coupler.
Connect the AC plug cord to the AC adapter.
Plug the AC plug cord into the power outlet.
1
Getting Started
• Make sure that the camera is turned off before connecting or
disconnecting the AC adapter.
• Make sure that the AC plug cord and the DC terminal connecting the
AC adapter to the camera are inserted securely. Data may be lost if
either becomes disconnected while data is being recorded on the SD
Memory Card or the built-in memory.
• Use the AC adapter with due care to avoid fire or electric shock.
Be sure to read “About the Battery Charger and the AC Adapter” (p.3)
before using the AC adapter.
• Be sure to read the operation manual accompanying the AC adapter
kit K-AC117 before using the adapter.
• When connecting the AC adapter, you cannot set the camera upright
on the table because the cord from the DC coupler comes out of the
bottom of the camera.
• Do not use excessive force when sliding the battery/card cover open
and closed because the waterproof packing may peel off. If the
packing is not in the correct position, the camera will not be waterproof.
39
Installing the SD Memory Card
1
Getting Started
This camera uses SD Memory Cards, SDHC Memory Cards or SDXC
Memory Cards. (These cards are referred to as SD Memory Cards
hereafter.) Captured images and sound files are saved on the SD
Memory Card if a card is inserted in the camera. They are saved in the
built-in memory if a card is not inserted (p.43).
• Be sure to use this camera to format (initialize) an SD Memory
Card that is unused or has been used on other cameras or digital
devices. Refer to “Formatting the Memory” (p.214) for
instructions on formatting.
• Make sure that the camera is turned off before inserting or removing
the SD Memory Card.
• Allow the camera to dry completely before changing the SD Memory
Card. Avoid changing the card where the camera is likely to get wet or
dirty, and make sure that your hands are dry.
• Do not use excessive force when sliding the battery/card cover open
and closed because the waterproof packing may peel off. If the
packing is not in the correct position, the camera will not be waterproof.
• The still picture storage capacity varies depending on the capacity of
the SD Memory Card and the selected number of recorded pixels and
quality level (p.280).
• The power lamp blinks while the SD Memory Card is being accessed
(data is being recorded or read).
Backing Up Data
The camera may not be able to access data in the built-in memory in the case
of a malfunction. Use a computer or other device to back up important data in
another location.
40
1
1
Battery/card cover
SD Memory Card
Getting Started
SD Memory Card
socket
Open the battery/card cover.
Press the battery/card cover lock lever in the direction shown 1, slide
the cover towards 2 and open it towards 3.
2
Insert the SD Memory Card into the SD Memory Card
socket so that the label is facing toward the front of the
camera (the side with the lens).
Push the card in all the way. Images and sound may not be recorded
correctly if the card is not inserted all the way.
3
Close the battery/card cover.
While lightly pressing the battery/card cover in the opposite direction
indicated by 2, slide the cover. The cover clicks to confirm that it is
securely closed.
To Remove the SD Memory Card
1
2
Open the battery/card cover.
Push the card into the SD Memory Card socket to eject
it.
Pull the card out.
If the battery/card cover is not locked securely when you close it, water,
sand, or dirt may get into the camera.
41
Number of Images Recordable on an SD Memory
Card
1
Getting Started
The size of a recorded image differs depending on the number of
recorded pixels of the images. This affects the number of images that
can be saved on an SD Memory Card.
Choose the appropriate number of recorded pixels for still pictures on the
[A Rec. Mode] menu.
Selecting the Number of Recorded Pixels 1p.116
Choose the appropriate number of recorded pixels and frame rate in
[Movie] on the [A Rec. Mode] menu.
Selecting the Number of Recorded Pixels and Frame Rate for Movies
1p.143
For an approximate guide to the number of images or the length of
recorded movies that can be saved on an SD Memory Card, see “Main
Specifications” (p.279).
42
Turning the Camera On and Off
Power switch/Power lamp
1
Getting Started
1
Press the power switch.
The camera turns on and both the power lamp and display turn on.
If the [Language/
] screen or [Date Adjustment] screen appears
when you turn the camera on, follow the procedure on p.45 to set the
display language and/or current date and time.
2
Press the power switch again.
The camera turns off and both the power lamp and display turn off.
Taking Still Pictures 1p.65
Checking the SD Memory Card
The SD Memory Card is checked when
the camera turns on and the memory
status is displayed.
a
+
r
The SD Memory Card is inserted. Images
and sound files will be saved on the SD
Memory Card.
The SD Memory Card is not inserted.
Images and sound files will be saved in the
built-in memory.
The write-protect switch on the SD Memory
Card is in the LOCK position (p.7). Images
and sounds cannot be recorded.
38
Memory status
43
Starting-up in the Playback Mode
1
Use this function when you want to play back images or sound files
straightaway without taking any pictures.
Getting Started
Power switch
Q button
1
Press the power switch while holding down the Q
button.
The display turns on and the camera starts up in playback mode.
To switch from Playback Mode to A mode, press the Q button or press
the shutter release button halfway.
Playing Back Still Pictures 1p.151
44
Initial Settings
The language, date, and time can be changed later. Refer to the pages below
for instructions.
• To change the language, follow the steps in “Changing the Display Language”
(1p.225).
• To change the date and time, follow the steps in “Changing the Date and
Time” (1p.217).
1
Getting Started
The [Language/
] screen appears when the camera is turned on for
the first time. Perform the operations in “Setting the Display Language”
below to set the language, and in “Setting the Date and Time” (p.49) to
set the current date and time.
Setting the Display Language
3 button
Four-way controller
4 button
1
Use the four-way controller
(2345) to choose the
display language.
MENU Cancel
OK OK
45
2
Press the 4 button.
The [Initial Setting] screen appears in
the selected language. If the desired
settings for [Hometown] and [DST]
(Daylight Saving Time) appear,
proceed to Step 3.
Proceed to “To Set Hometown and
DST” (p.48) if the desired settings do
not appear.
1
Getting Started
3
Press the four-way controller
(3) twice to select [Settings
complete].
Initial Setting
English
Hometown
New York
DST
OFF
Settings complete
MENU Cancel
Daylight saving time
Initial Setting
English
Hometown
New York
DST
OFF
Settings complete
MENU Cancel
4
OK OK
Press the 4 button.
The [Date Adjustment] screen appears. Set the date and time by
following the procedure in “Setting the Date and Time” (p.49).
46
If you accidentally select the wrong language and go to the next procedure,
perform the following operation to set the language back.
Press the four-way controller (5).
Use the four-way controller (2345) to select the
language and press the 4 button.
The [Initial Setting] screen appears in the selected language.
1
2
3
4
5
6
7
When the Screen After Step 2 Appears in the Wrong Language
1
Getting Started
1
2
When the Wrong Language Has Been Inadvertently Selected
Press the 3 button.
This exits the settings screen and returns the camera to capture
mode.
Press the 3 button.
The [A Rec. Mode] menu appears.
Press the four-way controller (5).
Use the four-way controller (32) to select [Language/
].
Press the four-way controller (5).
The [Language/
] screen appears.
Use the four-way controller (2345) to select the
language.
Press the 4 button.
The [W Setting] menu appears in the selected language.
The language is now switched to your desired language. To reset [Hometown],
[Date] and [Time], refer to the pages below for instructions.
• To change [Hometown], follow the steps in “Setting the World Time”
(1p.221).
• To change the date and time, follow the steps in “Changing the Date and
Time” (1p.217).
47
To Set Hometown and DST
3
1
Press the four-way controller
(3).
Initial Setting
English
Getting Started
The frame moves to [W Hometown].
Hometown
New York
DST
OFF
Settings complete
MENU Cancel
4
Press the four-way controller (5).
The [W Hometown] screen appears.
5
Use the four-way controller
(45) to choose a city.
Hometown
City
New York
DST
MENU Cancel
6
OK OK
Press the four-way controller (3).
The frame moves to [DST] (Daylight Saving Time).
7
8
Use the four-way controller (45) to select O or P.
Press the 4 button.
The [Initial Setting] screen reappears.
9
Press the four-way controller
(3) to select [Settings
complete].
Initial Setting
English
Hometown
New York
DST
OFF
Settings complete
MENU Cancel
OK OK
10 Press the 4 button.
The [Date Adjustment] screen appears. Next, set the date and time.
48
Setting the Date and Time
Set the current date and time and the display format.
1
Press the four-way controller (5).
1
Getting Started
The video output format (NTSC/PAL) is set to the format of the city selected in
[Hometown] on the [Initial Setting] screen. See the following pages for information
on the available video output formats and how to change the initial settings.
• Video output formats available initially: “List of World Time Cities” (1p.278)
• To change the video out format, follow the steps in “Changing the Video
Output Format” (1p.228).
The frame moves to [mm/dd/yy].
2
Use the four-way controller
(23) to choose the date and
time display format.
Date Adjustment
Choose from [mm/dd/yy], [dd/mm/yy]
or [yy/mm/dd].
Date Format
mm/dd/yy 24h
Date
01/01/2013
Time
00:00
Settings complete
MENU Cancel
3
Press the four-way controller (5).
The frame moves to [24h].
4
Use the four-way controller
(23) to select [24h] (24-hour
display) or [12h] (12-hour
display).
Date Adjustment
Date Format
mm/dd/yy 24h
Date
01/01/2013
Time
00:00
Settings complete
MENU Cancel
5
Press the four-way controller (5).
The frame returns to [Date Format].
49
6
Press the four-way controller
(3).
Date Adjustment
Date Format
mm/dd/yy 24h
The frame moves to [Date].
Date
01/01/2013
1
Time
00:00
Settings complete
Getting Started
MENU Cancel
7
Press the four-way controller (5).
The frame moves to the month.
8
Use the four-way controller
(23) to change the month.
Change the day and year in the same
manner.
Next, change the time.
If you selected [12h] in step 4, the
setting switches between am and pm
corresponding to the time.
9
Press the four-way controller
(3) to select [Settings
complete].
Date Adjustment
Date Format
mm/dd/yy 24h
Date
01/01/2013
Time
00:00
Settings complete
MENU Cancel
Date Adjustment
Date Format
mm/dd/yy 24h
Date
01/01/2013
Time
00:00
Settings complete
MENU Cancel
OK OK
10 Press the 4 button.
This confirms the date and time.
If you press the 4 button in step 10, the camera clock is reset to 00
seconds. To set the exact time, press the 4 button when the time
signal (on the TV, radio, etc.) reaches 00 seconds.
When the [Initial Setting] or [Date Adjustment] screen is displayed, you
can cancel the setting operation and switch to the capture mode by
pressing the 3 button. In this case, the [Initial Setting] screen will
appear next time you turn the camera on.
50
1
Getting Started
[Language/
], [Date], [Time], [Hometown] and [DST] can be changed. Refer
to the pages below for instructions.
• To change the language, follow the steps in “Changing the Display Language”
(1p.225).
• To change the date and time, follow the steps in “Changing the Date and
Time” (1p.217).
• To change the city or turn DST on and off, follow the steps in “Setting the
World Time” (1p.221).
51
Understanding the Button Functions
A Mode
1
2
2
Common Operations
3
4
6
7
8
5
1
Power switch
2
Shutter release button
9
Turns the camera on and off (p.43).
Focuses the camera on the subject when pressed halfway in Still
Picture Capture Mode (except when the focus mode is set to 3, s,
and \) (p.66).
Takes a still picture when pressed down fully (p.66).
Pressing down fully starts and stops movie recording in C (Movie) and
(Underwater Movie) modes (p.139, p.142).
Pressing down fully starts and stops sound file recording in O (Voice
Recording) mode (p.209).
3
w/xbutton
Changes the captured area (p.79).
4
Q button
Switches to the Q mode (p.56).
5
3 button
Displays the [A Rec. Mode] menu (p.57).
52
2Common Operations
6
I button
Switches the Face Detection function (p.71). The Face Detection
function is switched as follows each time the I button is pressed:
Smile Capture ´ Self-portrait Assist ´ Self-portrait Assist + Smile
Capture ´ Face Detection Off ´ Face Detection On
Selects or registers a pet in e (Pet) mode.
7
Four-way controller
8
4/W button
9
Green button
Changes the information on the display (p.23).
Switches to the 9 (Green) mode (p.77).
Calls up the assigned function (p.130).
2
Common Operations
(2)
: Changes the drive mode (p.94 - p.101).
(3)
: Displays the Capture Mode Palette (p.70).
(4)
: Changes the flash mode (p.108).
(5)
: Changes the focus mode (p.110).
(23) : Adjusts the focus when the focus mode is set to \ (p.111).
53
Q Mode
1
2
2
3
Common Operations
4
6
7
8
5
1
9
Power switch
Turns the camera on and off (p.43).
2
Shutter release button
Switches to A mode (p.56).
3
f/y button
In single-image display, pressing f switches to 6-image display.
Pressing f again switches to 12-image display (p.153). Press y to
return to the previous display.
In single-image display, pressing y enlarges the image. Press f to
return to the previous display (p.162).
In 12-image display press f to change to folder or calendar display (p.154).
In folder/calendar display, press y to change to 12-image display
(p.154, p.155).
Adjusts the volume during playback of movies, sound files or voice
memo (p.152, p.210, p.213).
4
Q button
5
3 button
Switches to A mode (p.56).
Displays the [W Setting] menu during single-image display (p.57).
Returns to single-image display during Playback Mode Palette display (p.156).
Returns zoom, 6- or 12-image display to single-image display.
54
Changes to 12-image display of the selected folder during folder display (p.155).
Changes to 12-image display of the selected date during calendar
display (p.155).
6
I button
Zooms up on the subjects’ faces in the order in which they were
recognized during shooting (Face close-up playback) (p.163).
7
Four-way controller
(2)
8
2
Common Operations
: Plays back and pauses a movie or sound file (p.152,
p.210, p.213).
(3)
: Displays the Playback Mode Palette (p.157).
Stops a movie or sound file during playback (p.152,
p.211, p.213).
(45)
: Displays the previous or next image and sound file
during single-image display (p.151).
Fast-forwards, fast-reverses, frame forwards, frame
reverses, reverses a movie and makes a movie play
forwards during playback (p.152).
Fast forwards, reverses, and moves to the next index in
sound file playback (p.210).
(2345) : Moves the display area during zoom display (p.162).
Selects an image in 6- or 12-image display, a folder in folder
display, and a date in calendar display (p.153, p.154, p.155).
Moves the image when using the Frame Composite
function (p.193).
Adjusts the position of a frame or an image when you are
using the Original Frame function (p.197).
4/W button
Changes the information on the display (p.28).
Returns zoom, 6- or 12-image display to single-image display (p.154, p.162).
Changes to 12-image display of the selected folder during folder
display (p.154).
Changes to single-image display of the selected date during calendar
display (p.155).
9
Green/i button
Switches from single-image display to the Delete screen (p.165).
Switches from 6- or 12-image display to the Select & Delete screen (p.167).
Switches from folder display to the calendar display screen (p.154).
Switches from calendar display to the folder display screen (p.154).
55
Switching Between A Mode and Q Mode
2
In this manual, the capture mode, such as for taking still pictures, is
referred to as “A mode” (the capture mode). The playback mode, such
as for displaying captured images on the monitor, is referred to as “Q
mode” (the playback mode). In Q mode, you can perform simple editing
operations on the images that are played back.
Follow the procedure below to switch between A mode and Q mode.
Common Operations
To Switch from A Mode to Q Mode
1
Press the Q button.
The camera switches to Q mode.
To Switch from Q Mode to A Mode
1
Press the Q button or the shutter release button halfway.
The camera switches to A mode.
Displaying data stored in the built-in memory
When an SD Memory Card is inserted in the camera, images, movies,
and sounds on the SD Memory Card are displayed. If you want to
display images, movies, and sounds stored in built-in memory, turn the
camera off and remove the SD Memory Card.
Make sure that the camera is turned off before inserting or removing
the SD Memory Card.
56
Setting the Camera Functions
To change the camera settings, press the 3 button to display the
[A Rec. Mode] menu or [W Setting] menu. Functions for playing back
and editing images and sound files are displayed from the Playback
Mode Palette.
2
Press the 3 button in A mode to display the [A Rec. Mode] menu.
Press the 3 button in Q mode to display the [W Setting] menu.
Use the four-way controller (45) to switch between [A Rec. Mode]
menu and [W Setting] menu.
Common Operations
Operating the Menus
57
During recording
During playback
100-003
10
100-0038
0038
P
38
Edit
2
Common Operations
MENU
MENU
Rec. Mode
1/4
Setting
Image Tone
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Bright
14M
Sound
Date Adjustment
Alarm
World Time
Text Size
AWB
MENU Exit
1/4
02/02/2013
Standard
English
MENU Exit
Rec. Mode
1/4
Setting
Image Tone
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Bright
14M
Sound
Date Adjustment
Alarm
World Time
Text Size
AWB
MENU Exit
SHUTTER
1/4
02/02/2013
Standard
English
MENU Exit
MENU
Press halfway
100-003
10
100-0038
0038
P
38
The setting is complete
and the camera returns
to A mode.
Edit
The setting is complete
and the camera returns
to Q mode.
Available button operations appear on the display during menu
operation.
58
e.g.: To set the [Quality Level] on the [A Rec. Mode] menu
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Press the four-way controller
(3).
The frame moves to [Image Tone].
1/4
Bright
14M
2
‫ڎڎ‬
AWB
MENU Exit
3
Press the four-way controller (3) twice.
The frame moves to [Quality Level].
4
Press the four-way controller
(5).
A pull-down menu appears with the
items that can be selected.
The pull-down menu displays only
those items that can be selected with
the current camera settings.
5
12
Recordable Image No.
Image Tone
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
MENU Cancel
Bright
14M
Common Operations
Rec. Mode
Image Tone
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
‫ڎڎڎ‬
‫ڎڎ‬
‫ڎ‬
OK OK
Use the four-way controller (23) to change the setting.
The quality level changes each time the four-way controller (23) is
pressed.
6
Press the 4 button or the four-way controller (4).
The setting is saved and then the camera is ready for setting other
functions.
To exit the settings, press the 3 button.
To use another operation, refer to the alternate step 6 options on the next
page.
59
To Save the Setting and Start Taking Pictures
6
Press the shutter release button halfway.
The setting is saved and the camera returns to capture mode.
When the shutter release button is pressed fully, the picture is taken.
When the [W Setting] menu is displayed from Q mode, you can switch
to A mode by pressing the Q button.
2
Common Operations
To Save the Setting and Start Playback of Images
6
Press the Q button.
When the [A Rec. Mode] menu is displayed from A mode, the setting
is saved and the camera returns to playback status.
To Cancel the Changes and Continue with Menu Operations
6
Press the 3 button.
The changes are canceled and the screen returns to step 3.
The 3 button function differs depending on the screen. Refer to the
guide indications.
MENU Exit
Exits the menu and returns to the original screen.
MENU
Returns to the previous screen with the current
setting.
MENU Cancel Cancels the current selection, exits the menu and
returns to the previous screen.
60
Menu List
This displays the items that can be set with the menus and provides
descriptions of each item. See the list of default settings in the Appendix
“Default Settings” (p.273) to decide whether you want the settings saved
when the camera is turned off and whether you want the settings
returned to the defaults when the camera is reset.
Item
Image Tone
Recorded Pixels
Quality Level
Description
For setting the tone of images
For choosing the number of recorded pixels of still pictures
For setting the quality level of still pictures
For adjusting the color balance according to the
White Balance
lighting conditions
When = (Standard), q (Macro), or
(1cm
Focusing
Macro) is selected as the focus mode, you can
Area
change the autofocus area (Focusing Area)
AF
Setting Auto Macro For choosing whether or not to use the auto macro function
For setting whether or not to use the focus assist
Focus
Assist
light
For choosing the area of the screen that is metered
AE Metering
to determine the exposure
Sensitivity
For setting the sensitivity
For setting the adjustment range when sensitivity is
AUTO ISO Range
set to AUTO
EV Compensation
For adjusting the overall brightness of the picture
Recorded
For choosing the number of recorded pixels and the
Pixels
frame rate for movies
For choosing whether or not to use the movie shake
Movie
Movie SR
reduction function
Interval
For recording multiple still pictures taken at a set
Shoot
interval as a movie file
Highlight
For setting whether to perform bright portion
D-Range Correction compensation
Setting Shadow
For setting whether to perform dark portion
Correction compensation
For choosing whether to compensate for camera
Pixel Track SR
shake while taking still pictures
For setting the interval, number of pictures, and start
Interval Shoot
time for taking pictures
Page
p.115
p.116
p.118
p.119
2
Common Operations
[A Rec. Mode] Menu
This menu shows the functions related to taking still pictures and
recording movies.
p.112
p.113
p.114
p.121
p.122
p.123
p.124
p.143
p.144
p.145
p.125
p.125
p.126
p.127
61
Item
2
Common Operations
Description
For choosing whether to use the Blink Detection
Blink Detection
function with the Face Detection function
For choosing whether or not to use the digital zoom
Digital Zoom
function
Instant Review
For choosing whether to display Instant Review
For choosing whether to save the set values of the
Memory
shooting function or return to the defaults when the
camera is turned off
For assigning a function to the Green button in A
Green Button
mode
Sharpness
For choosing sharp or soft outlines
For setting the color saturation. When [Monochrome] is
Saturation
selected, the item changes to [Tone Adjustment]
(Tone Adjustment)
Contrast
For setting the image contrast level
For choosing whether to imprint the date and/or time
Date Imprint
when taking still pictures
IQ Enhancer*
For setting whether to perform the IQ enhancer.
For setting whether or not to turn on the macro light
Macro Light
for macro photography
*IQ Enhancer = Image Quality Enhancer
[A Rec. Mode] Menu 1
Rec. Mode
1/4
Rec. Mode
Bright
14M
Sensitivity
AUTO ISO Range
EV Compensation
Movie
D-Range Setting
Pixel Track SR
MENU Exit
Rec. Mode
MENU Exit
p.81
p.130
p.149
p.130
p.134
p.135
p.136
p.136
p.137
p.138
2/4
AUTO
ISO80-800
0.0
MENU Exit
[A Rec. Mode] Menu 3
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
p.129
[A Rec. Mode] Menu 2
Image Tone
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
‫ڎڎ‬
AWB
Page
3/4
[A Rec. Mode] Menu 4
Rec. Mode
Sharpness
Saturation
Contrast
Date Imprint
IQ Enhancer
Macro Light
4/4
Off
MENU Exit
• Use the 9 (Green) mode to enjoy easy picture-taking using standard
settings, regardless of the settings in the [A Rec. Mode] menu (p.77).
• Assigning frequently used functions to the Green button enables you
to go straight to the desired function (p.130).
62
[W Setting] Menu
Item
Page
p.215
p.217
p.219
p.221
p.224
p.225
p.226
p.247
p.228
p.229
2
Common Operations
Description
For adjusting the operation volume and playback
Sound
volume, and setting the start-up sound, shutter
sound, key operation sound, and self-timer sound
Date Adjustment For adjusting the date and time
Alarm
For setting the alarm
World Time
For setting the hometown and destination
Text Size
For setting the text size of the menu
For setting the language in which menus and
Language/
messages appear
For choosing how names are assigned to folders for
Folder Name
storing images and sound files
For setting the method for connecting to a PC (MSC
USB Connection
or PTP)
Video Out
For setting the output format to the AV equipment
For setting the HDMI output format when connecting
HDMI Out
to an AV device with an HDMI terminal
For setting whether or not to use Eye-Fi
Eye-Fi
communication
Brightness Level For changing the brightness of the display
For setting the time until the camera enters powerPower Saving
saving mode
For setting the time until the camera turns off
Auto Power Off
automatically
For choosing whether to use the Quick Zoom function
Quick Zoom
(p.162) when playing back images
For setting whether to display explanations for
Guide Display
selected items in Capture Mode Palette and Playback
Mode Palette displays
For returning settings other than the date and time,
Reset
language, world time and video out to their defaults
Delete All
For deleting all the images and sound files at once
Pixel Mapping
For correcting for defective pixels on the CCD sensor
Format
For formatting the SD Memory Card/built-in memory
p.231
p.232
p.233
p.234
p.235
p.236
p.239
p.168
p.237
p.214
63
[W Setting] Menu 1
Setting
2
Sound
Date Adjustment
Alarm
World Time
Text Size
01/01/2013
Standard
English
Common Operations
[W Setting] Menu 3
Setting
Power Saving
Auto Power Off
Quick Zoom
Guide Display
Reset
Delete All
Setting
Folder Name
USB Connection
Video Out
HDMI Out
Eye-Fi
Brightness Level
2/4
Date
MSC
NTSC
Auto
MENU Exit
MENU Exit
MENU Exit
64
1/4
[W Setting] Menu 2
3/4
5 sec.
3 min.
[W Setting] Menu 4
Setting
Pixel Mapping
Format
MENU Exit
4/4
Taking Still Pictures
3Taking Pictures
Taking Pictures
This camera is equipped with functions and shooting modes that support
a wide array of scenes and subjects. This section explains shooting
using the default settings when shipped.
Power switch
Shutter release button
1
Press the power switch.
3
Taking Pictures
w/x button
The camera turns on and is ready to take still pictures. In this manual,
this is called Still Picture Capture mode.
2
Confirm the subject and
shooting information on the
display.
The focus frame in the middle of the
display indicates the zone of
automatic focusing.
38
Focus frame
When the camera detects a person’s
face, the Face Detection function is
activated and the face detection frame
appears (p.71).
38
Face detection frame
65
You can change the captured area by pressing the zoom button (p.79).
Right (x) Enlarges the subject.
Left (w)
Widens the area that is captured by the camera.
3
Press the shutter release
button halfway.
The camera emits Focus Assist light in
dark shooting situations.
The focus frame (or face detection
frame) on the display turns green
when the camera focuses on the
subject at the correct distance.
3
Taking Pictures
4
1/250
F4.6
38
Press the shutter release button fully.
The picture is taken.
The flash discharges automatically depending on the light conditions.
The image appears on the display temporarily (Instant Review: p.68)
and is saved to the SD Memory Card or the built-in memory.
Press the Green button to switch to the 9 (Green) mode and let the
camera set all the shooting functions automatically (p.77).
66
Using the Shutter Release Button
The shutter release button works in a two-step action as follows.
Press halfway
This refers to pressing the shutter release button gently to the first
position. This locks the focus setting and the exposure. The green focus
frame lights on the display when the shutter release button is pressed
halfway and the subject is in focus. If the subject is out of focus, the
frame turns white.
Not pressed
3
Taking Pictures
Press fully
This refers to pressing the shutter release button all the way down to the
fully depressed position. This takes a picture.
Pressed halfway Pressed fully
(second position)
(first position)
• Press the shutter release button gently when taking a picture to
prevent camera shake.
• Practice pressing the shutter release button halfway/fully to learn
where the first position and second position are.
Poor focusing conditions
The camera may not be able to focus under the following conditions. In these
cases, lock the focus on an object the same distance away as the subject (by
pressing and holding the shutter release button halfway), then aim the camera
at your subject and press the shutter release button fully.
• Objects that lack contrast such as a blue sky or white wall
• Dark places or objects, or conditions that prevent light being reflected back
• Intricate patterns
• Fast moving objects
• When there is an object in the foreground and an object in the background in
the captured area
• Strongly reflected light or strong backlighting (bright background)
67
Instant Review and Blink Detection
The image appears on the display temporarily (Instant Review)
immediately after it is captured. If the camera detects that the subject’s
eyes are closed while Face Detection (p.71) is activated, the message
[Closed eyes have been detected] appears for 3 seconds (Blink
Detection).
3
Taking Pictures
68
• When the Face Detection function does not work, Blink Detection also
does not function. Even if the subject’s faces are recognized, Blink
Detection may not function depending on the condition of the
recognized faces.
• You can also disable the Blink Detection function (p.129).
Setting the Shooting Mode
This camera has a variety of shooting modes that let you take pictures
or record movies and sound in different situations simply by choosing the
right mode for the particular situation from the Capture Mode Palette.
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller
(2345) to choose a
shooting mode.
A guide of the selected shooting mode
is displayed in the lower part of the
display.
3
Landscape
1/2
3
Taking Pictures
Four-way controller
4 button
For capturing landscape
views. Enhances colors
of sky and foliage
MENU Cancel
OK OK
Press the 4 button.
The shooting mode is selected and the
camera returns to capture mode.
38
69
The following 24 modes can be selected with Capture Mode Palette.
Item
Description
Automatically selects the best capture mode
p.75
R Program
Used for basic shooting. Various functions can
also be set with this mode
p.76
A Night Scene
For night time images. Use of a tripod or other
support is suggested
p.81
Movie
For recording movies
p.141
Underwater
For capturing images underwater
C
Underwater Movie Use this mode for taking underwater movie
3
p.139
p.139
Taking Pictures
Digital Microscope
Capture the bigger images of the closer objects
(fixed to h)
p.90
a
Landscape
For capturing landscape views. Enhances colors
of sky and foliage
⎯
b
Flower
For images of flowers. The outline of the flower is
softened
⎯
c Portrait
For capturing portraits. Reproduces a healthy
and bright skin tone
p.83
X Digital Wide
Stitches two pictures together to create a wider
image
p.102
c Digital SR
Higher sensitivity reduces blur
p.81
Q Surf & Snow
For bright images such as sand or snow.
Accurately meters for bright scenes
p.88
R
For capturing moving kids. Reproduces a healthy
and bright skin tone
p.84
Suitable shooting for moving pets. Available to
detect registered pets
p.85
Sport
For a fast moving subject. Tracks the subject until
the picture is taken
p.88
S Fireworks
For capturing fireworks. Use of a tripod or other
support is suggested
p.81
Kids
e Pet
\
U
Candlelight
For capturing scenes in candlelight
p.81
B
Night Scene
Portrait
For images of people at night. Use of a tripod or
other support is advised
p.81
B
Text
Captures text in an easy to read manner. Text
contrast can be adjusted
p.89
K
Food
For images of food and prepared dishes.
Enhances saturation and contrast
⎯
Stitches images taken with the camera to create
F Digital Panorama a panoramic photograph
70
Page
b Auto Picture
p.105
Item
N
Description
Page
Frame Composite
For capturing images with a frame. Recorded
pixels is fixed to h or h
p.92
Report
For capturing image with fixed 1280×960 pixels
for reports
⎯
* Green Mode (p.77) and Voice Recording (p.208) are available in addition to the
ones noted above.
3
Taking Pictures
• In shooting modes other than R (Program), A (Night Scene),
C (Movie),
(Digital Microscope), c (Digital SR), F (Digital
Panorama), X (Digital Wide), and N (Frame Composite),
saturation, contrast, sharpness, white balance, etc. are automatically
set to the optimal settings for the selected mode.
• Some functions may not be available or may not function fully
depending on the selected shooting mode. For details, refer to
“Functions Available for Each Shooting Mode” (p.266).
• You can turn off the shooting mode guide on the Capture Mode Palette
(p.236).
Using the Face Detection Function
When the camera detects a person’s face in
the image, the Face Detection function
displays a yellow face detection frame around
the face on the display screen, sets the focus
(Face Detection AF) and compensates the
exposure (Face Detection AE).
If the subject in the face detection frame
moves, the frame also moves and
changes size as it tracks the face.
The Face Detection function can
recognize up to 32 people’s faces. If it
recognizes multiple faces, the camera
displays a yellow frame over the main face
and white frames over the other faces. It
can display up to a total of 31 frames,
including both the main and white frames.
38
Face detection frame
When the multiple faces are
detected
38
Main frame
White frame
71
• Face Detection AF and AE may not work if the subject is wearing
sunglasses, has part of their face covered or is not looking toward the
camera.
• If the camera cannot detect the subject’s face, the camera focuses
using the setting currently selected in [Focusing Area].
• However, the Smile Capture function may not work and an image may
not be captured, even when turned on, depending on the condition of
the recognized faces, such as the faces are too small. If this happens,
press the shutter release button to take a picture.
• In e (Pet) mode, the Face Detection mode is switched to pet
detection (only one pet).
3
Taking Pictures
To Switch the Face Detection Function
By default, the Face Detection function is set to Face Detection On. You
can switch to the Smile Capture function, which automatically releases
the shutter when your subject smiles. The Face Detection function is
switched as follows each time the I button is pressed:
Smile Capture ´ Self-portrait Assist ´ Self-portrait Assist + Smile
Capture ´ Face Detection Off ´ Face Detection On
I button
An icon indicating either Face Detection or Smile Capture appears on
the display. (The Face Detection Off icon only appears right after the
Face Detection function is switched to off.)
72
Face Detection On
P
Smile Capture
Self-portrait Assist
P
P
P
P
Self-portrait Assist
+ Smile Capture
• The Face Detection function cannot be set to off in b (Auto Picture),
B (Night Scene Portrait), c (Portrait), or R (Kids). Any one of Face
Detection On, Smile Capture, Self-portrait Assist or Self-portrait Assist
+ Smile Capture is always activated in these modes.
• When Face Detection Off is selected, selecting 9 (Green), b (Auto
Picture), B (Night Scene Portrait), C (Movie), c (Portrait), R (Kids),
or
(Underwater Movie) modes automatically switches to Face
Detection On. When switching to another mode from one of these
modes, the Face Detection setting returns to the previous setting.
• If you use the Face Detection function when the flash mode is set to
, (Auto), the flash mode automatically changes to d (Flash On +
Red-eye).
• The Self-portrait Assist or the Self-portrait Assist + Smile Capture
cannot be set to on in X (Digital Wide), F (Digital Panorama),
(Report), e (Pet), C (Movie),
(Underwater Movie), or (Digital
Microscope).
• Self-portrait Assist and Self-portrait Assist + Smile Capture cannot be
selected when
(Report) mode is selected or the Macro Light is on
in the [A Rec. Mode] menu.
Taking Pictures
Face Detection Off
3
73
To Use the Self-portrait Assist Function
The macro lights around the lens blink when the camera detects people
faces in the Self-portrait Assist or Self-portrait Assist + Smile Capture
function. The position of the blinking light indicates where the detected
face is on the screen.
When the camera detects a face
3
When the camera detects two faces
Taking Pictures
Detects a face on
the right while
facing the camera.
Detects two faces,
one at the center
and one on the right
while facing the
camera.
Detects a face on
the left while facing
the camera.
Detects two faces,
one at the center
and one on the left
while facing the
camera.
Detects a face at
the center while
facing the camera.
Detects two faces at
the center or one on
the right and one on
the left while facing
the camera.
• The camera can tell the position of up to two detected faces.
• When the camera detects three or four faces, the lights blink
depending on the number of the detected faces. When the camera
detects five or more faces, all lights (five) blink (the lights do not tell the
position of detected faces).
• In b (Auto Picture) mode, LED turns off after pressing the shutter
release button halfway when the camera is in a mode with no face
detection function.
• When the Self Portrait Assist function is on, LED does not turn off after
the set period of Power Saving.
• LED does not blink when the detected faces are too small.
74
Taking Pictures Automatically (Auto Picture Mode)
In b (Auto Picture) mode, the camera automatically selects the most
appropriate mode depending on the situations and subjects.
Shutter release
button
Four-way controller
4 button
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
3
Use the four-way controller (2345) to select
b (Auto Picture).
Taking Pictures
1
3
Press the 4 button.
Auto Picture mode is selected and the
camera returns to capture mode.
When the camera detects a person’s
face, the Face Detection function is
activated and the face detection frame
38
appears (p.71). When the camera
detects a pet’s full face, the shutter is automatically released.
4
Press the shutter release button halfway.
The automatically selected capture mode appears on the top left of the display.
Standard
Night Scene
Night Scene Portrait
Landscape
Flower
Portrait
Sport
Candlelight
Blue Sky
Portrait×Blue Sky
Portrait×Backlight
Sunset
Portrait×Sunset
Group Photograph
Text
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
75
5
Press the shutter release button fully.
The picture is taken.
The following restrictions apply in b mode:
• EV Compensation is unavailable.
• You cannot turn the Face Detection function off.
• The [Focusing Area] setting is fixed at J (Multiple).
• Flower cannot be selected when using Digital Zoom or Intelligent
Zoom.
• If Night Scene is selected when the flash mode is , (Auto) or c (Auto
+ Red-eye), the flash mode automatically changes to a (Flash Off).
• If the
(Night Scene Portrait) mode is selected when the flash mode
is , (Auto), the flash mode automatically changes to d (Flash On +
Red-eye) when the camera detects a face and determines that the
flash is needed.
3
Taking Pictures
Setting the Functions (Program Mode)
In R (Program) mode, the shutter speed and the aperture are set
automatically by the camera during shooting. However, you can select
other functions such as the flash mode and recorded pixels.
Shutter release
button
Four-way controller
4 button
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
76
Use the four-way controller (2345) to select
R (Program).
3
Press the 4 button.
Program mode is selected and the
camera returns to capture mode.
When the camera detects a person’s
face, the Face Detection function is
activated and the face detection frame
appears (p.71).
4
P
38
Set the functions you want to use.
Refer to “Setting the Shooting Functions” (p.108 - p.138) for details of
how to set the functions.
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
6
Press the shutter release button fully.
The picture is taken.
Taking Still Pictures 1p.65
3
Taking Pictures
5
Taking Pictures in the Basic Mode (Green Mode)
In the 9 (Green) mode, you can enjoy easy picture-taking using
standard settings, regardless of the settings in the [A Rec. Mode] menu.
9 mode settings are as shown below.
Flash Mode
, (Auto)
Drive Mode
9 (Standard)
Focus Mode
= (Standard)
Information Display Standard
Pixel Track SR
P (Off)
Recorded Pixels
g (4288×3216)
White Balance
F (Auto)
Focusing Area
J (Multiple)
Auto Macro
O (On)
Focus Assist
O (On)
L (Multi-segment
AE Metering
metering)
Image Tone
Bright
Quality Level
D (Better)
Highlight Correction P (Off)
Shadow Correction P (Off)
Sensitivity
AUTO (80-800)
EV Compensation ±0.0
Blink Detection
O (On)
Digital Zoom
O (On)
Instant Review
O (On)
Sharpness
G (Normal)
Saturation
G (Normal)
Contrast
G (Normal)
Date Imprint
Off
IQ Enhancer
O (On)
Macro Light
P (Off)
77
Shutter release
button
Green Button
3
1
Press the Green button in A
mode.
Taking Pictures
The camera switches to 9 mode.
Press the Green button again to
return to the status before 9 mode
38
was selected.
When the camera detects a person’s
face, the Face Detection function is activated and the face detection
frame appears (p.71).
2
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
3
Press the shutter release button fully.
The picture is taken.
• Assign 9 mode to the [Green Button] on the [A Rec. Mode] menu for
using 9 mode (p.131). (The default setting is 9 mode).
• In 9 mode, you cannot change the information on the display by
pressing the 4/W button.
• Press the 3 button in 9 mode to display the [W Setting] menu.
The [A Rec. Mode] menu cannot be displayed.
• When the camera is turned off in 9 mode, it turns on in 9 mode next
time the power switch is pressed.
78
Using the Zoom
You can use the zoom to change the captured area.
w/x button
3 button
Four-way controller
4 button
3
Press the w/x button in A
mode.
Zoom ratio
Zoom bar
w Wide (left)
Widens the area that is
captured by the camera.
x Tele (right)
Enlarges the subject.
33.5
Taking Pictures
1
38
If you continue to press x, the camera
automatically switches from Optical Zoom to Intelligent Zoom and
stops at the point where the zoom switches to Digital Zoom.
Once the button is released and pressed again, the camera switches
to digital zoom.
If the Digital Zoom is set to off on the menu, the Optical Zoom and the
Intelligent Zoom ranges are available for use. The zoom ratio of the
intelligent zoom changes depending on the number of recorded pixels.
The zoom bar is displayed as follows.
Zoom in with high image quality.
Optical zoom range*1
Zoom in with some degree of image
deterioration.
Intelligent
Zoom range*2
Digital Zoom
range
*1 You can zoom in to a maximum of 5× optically.
*2 The Intelligent Zoom range differs depending on the recorded
pixels. See the following table.
79
Recorded pixels and the maximum zoom ratio
3
Taking Pictures
80
Recorded Pixels
Intelligent Zoom
(The zoom ratio includes the 5× optical zoom.)
g/i/j
Not Available (5× optical zoom only)
6/
Approx. 7.0×
f/
Approx. 8.3×
h
Approx. 10.5×
h
V (*)
Not Available (5× optical zoom only)
l
Approx. 20.9×
Digital Zoom
Equivalent to
approx. 33.5×
Approx. 11.2×
Equivalent to
approx. 33.5×
Approx. 33.5× (same as Digital Zoom)
m
(*) V can only be set for recorded pixels when
(Report) mode is set.
• We recommend you use a tripod to prevent camera shake when taking
pictures at high zoom.
• Pictures taken in the digital zoom range appear grainier than pictures
taken in the optical zoom range.
• Intelligent Zoom is not available under the following conditions:
When the number of recorded pixels is set to g, i and j
(5× optical zoom available).
In 9 (Green), C (Movie), and
(Underwater movie) mode
• Intelligent Zoom and Digital Zoom are not available in c (Digital SR)
and
(Report) modes, or when the sensitivity is set to 3200 or 6400.
• The image enlarged using Intelligent Zoom may appear rough on the
display. This does not affect the quality of the recorded image.
• Intelligent Zoom is available regardless of whether Digital Zoom is
turned on or off.
• Digital Zoom is not available in
(Digital Microscope) mode.
• Not every zooming function is available in X (Digital Wide) mode.
To Set the Digital Zoom
The digital zoom is set to O (On) in the default settings. To take pictures
using only the optical zoom and Intelligent Zoom, set the digital zoom to
P (Off).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Digital Zoom].
Uses Digital Zoom
Uses only optical zoom
and Intelligent Zoom
The setting is saved.
O(On)
P (Off)
4
Rec. Mode
3/4
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
MENU Exit
3
Taking Pictures
Use the four-way controller
(45) to switch between
O (On) or P (Off).
Press the 3 button.
The camera returns to capture mode.
Saving the Digital Zoom Function setting 1p.149
Taking Pictures of Dark Scenes (Night Scene,
Night Scene Portrait, Digital SR, Fireworks, and
Candlelight Modes)
You can choose settings appropriate for taking pictures of dark scenes,
such as nightscapes.
A
B
c
For night time images. Use of a tripod or other support
is suggested
For images of people at night. Use of a tripod or other
Night Scene Portrait
support is advised
Night Scene
Digital SR
Higher sensitivity reduces blur
S
Fireworks
For capturing fireworks. Use of a tripod or other
support is suggested
U
Candlelight
For capturing scenes in candlelight
81
Shutter release
button
Four-way controller
4 button
3
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
Taking Pictures
2
3
Use the four-way controller (2345) to select
A (Night Scene), B (Night Scene Portrait), c (Digital
SR), S (Fireworks), or U (Candlelight).
Press the 4 button.
The shooting mode is selected and the camera returns to capture mode.
When the camera recognizes a person’s face, the Face Detection
function is activated and the face detection frame appears (p.71).
4
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
5
Press the shutter release button fully.
The picture is taken.
• The shutter speed tends to be slower when taking pictures of dark
scenes.
• To prevent the camera from shaking, set the Pixel Track SR (p.126) or
use a tripod and/or remote control (optional), the self-timer function
(p.94).
• In c (Digital SR) mode, the sensitivity is automatically set to AUTO,
the [AUTO ISO Range] is set to 80-6400, and the number of recorded
pixels is fixed at f (2592×1944)/
(2592×1464).
• For S (Fireworks) mode, the sensitivity is fixed at the minimum, the
focus mode is s (Infinity), and the flash mode is a (Flash Off). Also,
the shutter speed is set to 4 seconds and the aperture is fixed to open.
• Digital Zoom and Intelligent Zoom are not available in c (Digital SR)
mode.
82
Taking Pictures of People (Portrait Mode)
c (Portrait) mode is suitable for taking pictures of people. It reproduces
a healthy and bright skin tone. The Face Detection function (p.71)
operates for the shooting mode, making it easier to emphasize the
subject’s face when taking pictures.
Shutter release
button
3
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
3
Use the four-way controller (2345) to select
c (Portrait).
Press the 4 button.
The shooting mode is selected and the
camera returns to capture mode.
When the camera detects a person’s
face, the Face Detection function is
activated and the face detection frame
appears (p.71).
4
Taking Pictures
Four-way controller
4 button
38
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
5
Press the shutter release button fully.
The picture is taken.
83
Taking Pictures of Children (Kids Mode)
R (Kids) mode is suitable for taking pictures of moving children. It also
reproduces healthy and bright skin tone. Face Detection function (p.71)
operates automatically in R mode, making it easier to emphasize the
subject’s face when taking pictures.
Shutter release
button
3
Taking Pictures
Four-way controller
4 button
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
3
Use the four-way controller (2345) to select
R (Kids).
Press the 4 button.
Kids mode is selected and the camera
returns to capture mode.
When the camera detects a person’s
face, the Face Detection function is
activated and the face detection frame
appears (p.71).
4
38
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
5
Press the shutter release button fully.
The picture is taken.
84
Taking Pictures of Your Pet (Pet Mode)
In e (Pet) mode, the camera automatically releases the shutter when
the pet is detected. Also the camera can register pets.
Shutter release
button
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
3
Use the four-way controller (2345) to select e (Pet).
3
Taking Pictures
3 button
I button
Four-way controller
4 button
Green button
Press the 4 button.
e (Pet) mode is selected and the
camera returns to capture status.
When the camera detects the pet’s full
face, the shutter is automatically
released.
Selection / Registry
38
To Register the Pet
1
Press the I button on the
capture status screen in
e (Pet) mode.
Selecting pet to shoot
The pet registration screen appears.
New Registry
MENU Cancel
OK OK
85
2
Press the I button again.
The pet registration screen appears.
Aiming the camera at the pet’s full face
automatically releases the shutter and
the pet registration confirmation dialog
appears.
If pet face turns to camera
front, it's self-registering
MENU Cancel
Pet registration screen
3
Taking Pictures
When you select [Registry] using fourway controller (2) and press the 4
button, the picture of the registered
pet is indicated on the upper-left
corner of the display and the camera
returns to the capture status.
Register this image?
Registry
Cancel
OK OK
Registry confirmation screen
When the camera detects the pet’s full
face, the camera automatically
releases the shutter.
You can also take a picture by
pressing the shutter release button.
38
Selection / Registry
When you press the I button twice in
Capture status screen
the capture status screen, the pet
registration screen appears to register
another pet. You can register up to three pets.
• When you press the 3 button on the pet registration screen, the
registration will be canceled and the camera returns to the still picture
capture mode.
• Only dogs and cats can be registered using the Pet Detection function.
Other animals or human faces cannot be registered. You may not be
able to register a pet’s face if, for example, the pet’s face is too small.
• The camera may not detect the registered pet’s face, depending on the
shooting situation.
• You cannot turn off the LCD by pressing the 4/W button in
e (Pet) mode.
• Digital Zoom and Intelligent Zoom are unavailable when the sensitivity
is set to 3200/6400 in e (Pet) mode.
86
To Switch the Pet You Want to Shoot
If you have registered two or three pets, choose the pet you want to
detect.
1
Press the I button on the
capture status screen in
e (Pet) mode.
Selecting pet to shoot
The pet registration screen appears.
MENU Cancel
3
Use the four-way controller (45) to select the pet you
want to detect.
Press the 4 button.
The selected pet is switched to the pet you want to detect and the
camera returns to capture status.
3
Taking Pictures
2
Delete
OK OK
To Delete the Pet from the Entry
1
Press the I button on the
capture status screen in
e (Pet) mode.
Selecting pet to shoot
The pet registration screen appears.
MENU Cancel
2
3
4
5
Delete
OK OK
Use the four-way controller (45) to select the pet you
want to delete.
Press the Green button.
Use the four-way controller (2) to select [Delete].
Press the 4 button.
The selected pet is deleted.
• [Focusing Area] is set to W (Automatic Tracking AF) and the flash
mode is set to a (Flash Off). However, you can change these settings.
• [Focus Assist] is set to off. However, you can change this setting.
87
Taking Pictures of Sports and Leisure Activities
(Surf & Snow/Sport Mode)
Q
Surf & Snow
\
Sport
For bright images such as sand or snow. Accurately
meters for bright scenes
For a fast moving subject. Tracks the subject until the
picture is taken
3
Shutter release
button
Taking Pictures
Four-way controller
4 button
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
3
Use the four-way controller (2345) to select Q (Surf
& Snow) or \ (Sport).
Press the 4 button.
The shooting mode is selected and the camera returns to capture
mode.
When the camera detects a person’s face, the Face Detection function
is activated and the face detection frame appears (p.71).
4
Press the shutter release
button halfway.
The focus frame on the display turns
green when the camera focuses on
the subject at the correct distance.
38
When the Sport mode is selected, the
focus frame follows the subject while
the shutter release button is pressed halfway.
88
5
Press the shutter release button fully.
The picture is taken.
Taking Pictures of Text (Text Mode)
Take crisp and easy-to-read pictures of text. It is useful for taking
pictures of and saving important documents, and when the text is too
small and difficult to read.
A picture of the text is taken in its original color.
Reversed Color
The colors are reversed.
B&W
A picture of the text is taken in black and white.
Negative
Black and white are reversed.
3
Taking Pictures
Color
Shutter release
button
Four-way controller
4 button
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
3
Use the four-way controller (2345) to select
(Text).
Press the 4 button.
The text mode selection screen
appears.
MENU Cancel
4
Use the four-way controller (23) to select
OK OK
,
,
, or
.
89
5
Press the 4 button.
The selected icon appears and the
camera returns to capture status.
38
6
3
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
Taking Pictures
7
Press the shutter release button fully.
The picture is taken.
Taking Pictures in Digital Microscope Mode
In the Digital Microscope mode, you can take pictures of objects as close
as 1 cm, also because the macro lights around the lens are always
lighted, you can take minute pictures of text, the veins of leaves, or
specimens of tiny insects etc.
• The number of recorded pixels is fixed at h (1920×1080).
• The focus mode is fixed at
(1cm Macro).
• The default setting is O (On) for Pixel Track SR.
• j (Continuous Shooting) /c (Burst Shooting)/l (Auto Bracketing)
cannot be selected.
• The flash does not discharge in this mode.
• The Face Detection function and the Blink Detection function are
turned off.
• You can change the information display only between the normal and
No Info displays.
• The illumination of the macro lights may be uneven or insufficient
depending on the shooting conditions.
1
2
90
Press four-way controller (3) in A mode.
Use the four-way controller (2345) to select
(Digital Microscope).
3
Press the 4 button.
Digital Microscope mode is selected
and the camera returns to capture
mode.
38
4
Press the w/x button.
5
6.1
3.8
3
38
Press the shutter release button halfway.
The focus frame on the display turns green at the position where the
camera focuses on the subject.
6
Taking Pictures
If you press x, the camera enlarges
the subject.
w Wide (left)
Widens the area that is
captured by the camera.
x Tele (right)
Enlarges the subject.
Press the shutter release button fully.
The picture is taken.
Attaching the supplied macro stand (O-MS1) reduces camera shake
during macro photography (p.22).
91
Framing Your Pictures (Frame Composite Mode)
In N (Frame Composite) mode, you can take pictures using the frames
stored in the camera.
Shutter release button
f/y button
Four-way controller
4 button
3
Taking Pictures
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
3
Use the four-way controller (2345) to select
N (Frame Composite).
Press the 4 button.
The 12-frame display of the frame selection screen appears.
4
Use the four-way controller
(2345) to choose the frame
you want to use.
OK OK
5
Press the y button.
The selected frame appears in single-image display.
You can choose another frame using either of the following operations.
Four-way controller (45) Press to choose a different frame.
Zoom button (f)
Press to return to the 12-frame display of the frame
selection screen, and then perform step 4 to
choose a different frame.
92
6
Press the 4 button.
The frame appears on the display.
When the camera detects a person’s
face, the Face Detection function is
activated and the face detection frame
appears (p.71).
7
38
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
Press the shutter release button fully.
The picture is taken.
• The number of recorded pixels is fixed at h (2048×1536)/
h (1920×1080).
• You cannot turn off the LCD by pressing the 4/W button in
N (Frame composite) mode.
• At shipment, the camera includes 3 default frames for each aspect
ratio (4:3 and 16:9). (The CD-ROM supplied with the camera contains
a total of 90 frames, including the default frames.)
3
Taking Pictures
8
Optional Frames
The optional frames are stored in the CD-ROM supplied with the camera. To
use these frames, copy them from the CD-ROM. These optional frames are
deleted if the files on the built-in memory are deleted with a computer or if the
built-in memory is formatted.
Adding a Frame to a captured image 1p.192
93
Using the Self-timer
In Self-timer mode, the picture is taken ten seconds or two seconds after
the shutter release button is pressed.
Stabilize the camera with a tripod or other support when taking a picture
with the self-timer.
g
Z
3
Use this mode when you want to be included in a group picture. The picture
is taken approximately ten seconds after the shutter release button is pressed.
Use this mode to avoid camera shake. The picture is taken approximately two
seconds after the shutter release button is pressed.
Taking Pictures
Shutter release
button
Four-way controller
4 button
1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
3
Use the four-way controller (45) to select g and press
the four-way controller (3).
Use the four-way controller
(45) to select g or Z and
press the 4 button.
Drive Mode
The camera is ready to take the
Self-timer
picture using the self-timer.
MENU Cancel
When the camera detects a person’s
face, the Face Detection function is
activated and the face detection frame appears (p.71).
4
OK OK
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
94
5
Press the shutter release button fully.
Countdown starts and the remaining seconds are displayed on the screen.
If you select g
The self timer lamp and all of the macro lights turn on.
From 4 seconds before shooting, the macro lights turn off in order
from the top right.
From 3 seconds before shooting, the self timer lamp also blinks.
If you select Z
The self timer lamp and the macro lights blink.
The picture is taken after a countdown of either ten seconds or two seconds.
• In C (Movie) and
(Underwater Movie) modes, recording will start
after ten seconds (or two seconds).
• Press the shutter release button halfway while the self-timer is engaged
to stop the countdown and press fully to restart the countdown.
• Z cannot be selected while 9 (Green) mode is in default setting.
Select Z in another shooting mode and then switch the shooting mode
to 9.
• The self-timer lamp does not flash in e (Pet) mode.
• In the following situations, the macro lights remain turned on
regardless of the countdown.
- In the Digital Microscope mode
- When [Macro Light] on the [A Rec. Mode] menu is set to O (On)
3
Taking Pictures
Focusing may be compromised if you move the camera while the selftimer lamp is blinking when taking still pictures.
Taking a Series of Pictures (Continuous
Shooting/Burst Shooting)
Pictures are taken continuously as long as the shutter release button is
pressed.
j
c
Each time a picture is taken, the image is saved in the memory
Continuous
before the next image is taken. The higher the image quality,
Shooting
the longer the interval between shots.
The number of recorded pixels is fixed at f (2592×1944)/
Burst
(2592×1464) and the interval between shots is shorter
Shooting
than “Continuous Shooting”.
* The number of images that can be shot continuously and the interval between
shots depend on shooting situations.
95
Shutter release
button
Four-way controller
4 button
3
1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
Taking Pictures
2
Use the four-way controller
(45) to select j or c and
press the 4 button.
The camera is ready for continuous
shooting and burst shooting.
Drive Mode
Continuous Shooting
MENU Cancel
3
OK OK
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
4
Press the shutter release button fully.
Pictures are taken continuously as long as you keep the shutter
release button pressed.
• The flash does not discharge in j and c modes.
• j and c cannot be selected in 9 (Green), b (Auto Picture),
(Digital Microscope), A (Night Scene), C (Movie),
(Underwater Movie), S (Fireworks), N (Frame Composite),
X (Digital Wide) or F (Digital Panorama) modes.
• Digital Zoom and Intelligent Zoom are unavailable when the sensitivity
is set to 3200 and higher.
96
• With j, you can continue shooting until the memory capacity of the
SD Memory Card or built-in memory is full.
• The interval of j varies according to the [Recorded Pixels] and
[Quality Level] settings.
• The focus, exposure and white balance are locked with the first shot.
• When the Face Detection function is activated (p.71), it works only
when taking the first shot.
• The Blink Detection function works only for the last shot.
• The number of recorded pixels is fixed at f/
in c mode. When
the shooting mode is set to
(Report), the number of recorded
pixels is set to V (1280×960).
3
You can use the remote control (optional) to take pictures while you are
away from the camera.
i
h
3-sec Remote
Control
0-sec Remote
Control
The shutter will be released after about three seconds when
the shutter release button on the remote control unit is pressed.
The shutter will be released immediately when the shutter
release button on the remote control unit is pressed.
Taking Pictures
Taking Pictures Using the Remote Control Unit
(Optional)
Shutter release
button
Four-way controller
4 button
1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
Use the four-way controller (45) to select i and press
the four-way controller (3).
97
3
Use the four-way controller
(45) to select i or h and
press the 4 button.
Drive Mode
The self-timer lamp begins to blink
Remote Control
slowly and the camera is ready to take
MENU Cancel
OK OK
a picture with the remote control.
When the camera detects a person’s
face, the Face Detection function is activated and the face detection
frame appears (p.71).
3
4
Taking Pictures
Point the remote control at the remote control receiver
and press the shutter release button on the remote
control.
The focus frame turns green when the subject is in focus and the
camera takes a picture at the following timing.
When i (3-sec Remote Control) is selected:
The self-timer lamp and the macro lights blink quickly and the
camera takes a picture after about three seconds.
When h (0-sec Remote Control) is selected:
The camera takes a picture immediately.
• The operating range is approx. 4 m (13 ft) from the front of the camera
when using the remote control unit.
• In C (Movie) and
(Underwater Movie) modes, pressing the
shutter release button again stops the recording.
• The camera takes a picture even if the focus is not achieved.
• If the shutter release button on the camera is pressed halfway during
the countdown, the countdown stops. If the shutter release button on
the remote control is pressed again, the camera starts the countdown
again.
• i/hcannot be selected in 9 (Green) mode.
• The self-timer lamp does not flash in e (Pet) mode.
98
Taking Pictures at a Set Interval (Interval Shoot)
In this mode, a set number of pictures can be taken automatically at a
set interval from a set time.
1
2
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
Use the four-way controller
(45) to select k (Interval
Shoot) and press the 4 button.
The current interval shoot settings
appear for approximately 1 minute. To
take pictures with the current settings,
go to step 10.
3
Taking Pictures
Set the camera to take pictures at intervals. The
intervals can be set in increments of one second from
Interval
10 sec. – 99 min.
ten seconds to 4 minutes, or in 1 minute increments
from 4 to 99 minutes. You cannot set the camera to
take interval shots at less than ten seconds.
Number
2 shots – number of You can set this to up to 1000 shots. However, it
of Shots
recordable images cannot exceed the number of recordable images.
You can set 1 minute increments for the first 59
minutes and 1 hour increments from there. If the
Start Delay 0 min. – 24 hours
start time is set to 0 minutes, the first picture is taken
as soon as the shutter release button is pressed.
Drive Mode
Interval Shoot
MENU Cancel
OK OK
3
Press the 4 button while the settings are displayed.
4
Set the interval.
The [Interval Shoot] setting screen appears. [Interval] is marked with
the frame.
Interval Shoot
1 Press the four-way controller (5).
Interval
0min. 10 sec.
2 Use the four-way controller (23)
Number of Shots
2
to set the minutes, then press the
Start Delay
0hr. 0 min.
four-way controller (5).
3 Use the four-way controller (23) MENU
to set the seconds, then press the four-way controller (5).
The frame returns to [Interval].
5
Press the four-way controller (3).
The frame moves to [Number of Shots].
99
6
Set the number of shots.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set [Number of Shots],
then press the four-way controller (5).
The frame returns to [Number of Shots].
7
Press the four-way controller (3).
The frame moves to [Start Delay].
3
8
Set the start delay.
Taking Pictures
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set the hours, then press
the four-way controller (5).
3 Use the four-way controller (23) to set the minutes, then press
the four-way controller (5).
The frame returns to [Start Delay].
9
Press the 3 button.
The [Interval Shoot] settings are saved and the camera returns to capture mode.
10 Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
11
Press the shutter release button fully.
Interval shooting starts.
The LCD turns off between shots (during standby). Press the power
switch during standby to display the remaining number of shots and
interval on the monitor.
The [Stop interval shooting?] message is displayed when the power
switch and then the 3 button are pressed during standby.
Pressing the 4 button cancels interval shooting.
• Interval Shoot is unavailable in b (Auto Picture), 9 (Green),
F (Digital Panorama), X (Digital Wide), S (Fireworks) and
O (Voice Recording) modes.
• Even if an alarm is set, the alarm will not ring during interval shooting.
• Interval Shoot stops if the SD Memory Card is removed or inserted
during standby.
The Interval Shoot settings can also be configured from the [A Rec.
Mode] menu. (p.127)
100
Taking Pictures with Automatic Exposure
Adjustment (Auto Bracketing)
Press the shutter release button once to automatically adjust the
exposure and take three pictures in succession. After taking the pictures,
you can select the best one.
The shooting order is best exposure → –1.0 EV → +1.0 EV.
Shutter release
button
3
1
Press the four-way controller (2) in A mode.
Taking Pictures
Four-way controller
4 button
The [Drive Mode] screen appears.
2
Use the four-way controller
(45) to select a (Auto
Bracketing) and press the 4
button.
The camera is now ready to take
pictures with Auto Bracketing.
3
Drive Mode
Auto Bracketing
MENU Cancel
OK OK
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
4
Press the shutter release button fully.
Press the shutter release button once to automatically adjust the
exposure and take the three pictures at different exposures.
• When the Instant Review is set to on (p.130), the pictures taken are
shown in Instant Review after shooting (p.68).
• Auto Bracketing is unavailable in C (Movie),
(Underwater Movie),
b (Auto Picture),
(Digital Microscope), 9 (Green),
S (Fireworks), F (Digital Panorama), X (Digital Wide),
N (Frame Composite) and O (Voice Recording) modes.
101
Using the Digital Wide Function (Digital Wide
Mode)
In X (Digital Wide) mode, you can stitch two vertical images captured
with this camera into a single frame up to approx. 21 mm coverage (35
mm film equivalent).
3
Taking Pictures
+
Shutter release
button
Four-way controller
4 button
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
102
Use the four-way controller (2345) to select X
(Digital Wide).
3
Press the 4 button.
The camera enters the X mode.
Turn the camera 90° clockwise and align
your first picture.
When the camera detects a person’s face,
the Face Detection function is activated and
the face detection frame appears (p.71).
1
38
3
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
5
Press the shutter release button
fully.
2
The first captured image is temporarily
saved, and the shooting screen for the
second image is displayed.
Taking Pictures
4
OK Exit
6
Take the second image.
Overlap the image on the preview guide on the left of the screen to
compose the second image. Repeat steps 4 and 5 to take the second
image. This combines first and second images.
The stitched first and second image appears on the display temporarily
(Instant Review), and then is saved.
103
• To minimize distortion when taking the second image, turn the camera
so that it pivots around the right edge of the preview guide on the
screen.
• Some distortion may result from moving objects, repeating patterns, or
if nothing exists when overlapping the first and second image on the
preview guide.
• When the Face Detection function is activated (p.71), it works only
when taking the first shot.
• The number of recorded pixels for images captured with X mode is
fixed at f (2592×1944).
•
(1cm Macro) is unavailable in X mode.
• You cannot change the information on the display by pressing the 4/
W button in X (Digital Wide) mode.
3
Taking Pictures
To Cancel after Taking the First Shot
1
When the shooting screen for the second image is
displayed in step 5 on p.103, press the 4 button or the
four-way controller (3).
A confirmation dialog appears.
2
Use the four-way controller
(23) to select an option and
press the 4 button.
Save
Discard
Cancel
104
Saves the first image and you
can retake the first shot. The
first image is saved at
h (2048×1536).
Discards the first image and
you can retake the first shot.
Returns to the shooting
screen for the second image.
Save the image(s) and
exit this screen?
Save
Discard
Cancel
OK OK
Taking Panoramic Pictures (Digital Panorama
Mode)
In F (Digital Panorama) mode, you can stitch together two or three
captured frames to create a panoramic photograph with the camera.
Shutter release
button
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
3
Use the four-way controller (2345) to select F
(Digital Panorama).
3
Taking Pictures
Four-way controller
4 button
Press the 4 button.
The camera enters the F mode and the message [Set shift direction]
is displayed.
4
Use the four-way controller
(45) to choose the direction
in which the images will be
joined.
Set shift direction
The screen for taking the first frame is
displayed.
When the camera detects a person’s
face, the Face Detection function is
activated and the face detection frame
appears (p.71).
1
38
105
5
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
6
Press the shutter release button fully.
The screen for taking the second frame is displayed after you take the
first frame.
If you select right (5) in step 4:
The right edge of the first frame appears in semi-transparent form on
the left edge of the display.
3
Taking Pictures
If you select left (4) in step 4:
The left edge of the first frame appears in semi-transparent form on
the right edge of the display.
7
Take the second frame.
1 2
Move the camera so that the semitransparent image and the actual view
overlap and press the shutter release
button.
SHUTTER 2nd Frame
8
OK
Exit
Take the third frame.
Repeat steps 5 to 7 to take the third frame.
The panorama images are joined and a stitched together image
appears.
The stitched together image does not appear when [Instant Review]
(p.130) is off.
• Some distortion may result from moving objects, repeating patterns, or
if nothing exists when overlapping the first and second frames or the
second and third frames on the preview guide.
• When the Face Detection function is activated (p.71), it works only
when taking the first shot.
• You cannot turn off the LCD by pressing the 4/W button in
F (Digital Panorama) mode.
106
To Cancel after Taking the First or Second Frame
1
After shooting the first frame in step 6 on p.106 or the
second frame in step 7, press the 4 button or the
four-way controller (3).
A confirmation dialog appears.
2
Use the four-way controller
(23) to select an option and
press the 4 button.
Saves the captured image(s) and
you can retake the first frame.
When this option is selected after
shooting the second frame, the
first and the second frames are
stitched together and saved as a
panoramic photograph.
Discard Discards the captured image(s)
and you can retake the first frame.
Cancel Returns to the previous shooting
screen.
3
Save
Discard
Cancel
OK OK
Taking Pictures
Save
Save the image(s) and
exit this screen?
Unstitched images shot in F mode are fixed at i (1600×1200).
107
Setting the Shooting Functions
Selecting the Flash Mode
,
Auto
a
Flash Off
3
b
Flash On
Taking Pictures
c
d
The flash discharges automatically depending on the light
conditions.
The flash does not discharge, regardless of the brightness.
Use this mode to take pictures where flash photography is
prohibited.
The flash discharges regardless of the brightness.
This mode reduces the phenomenon of red eyes caused by
Auto + Red-eye the light from the flash being reflected in the subject’s eyes.
The flash discharges automatically.
This mode reduces the phenomenon of red eyes caused by
Flash On +
the light from the flash being reflected in the subject’s eyes.
Red-eye
The flash discharges regardless of the light conditions.
• The flash mode is fixed at a in the following situations:
- When C (Movie),
(Underwater Movie),
(Digital Microscope),
or S (Fireworks) is selected as the capture mode.
- When j (Continuous Shooting), c (Burst Shooting), or l (Auto
Bracketing) is selected as the Drive Mode.
- When s (Infinity) is selected as the focus mode.
• In 9 (Green) mode, you can only select , or a.
• In A (Night Scene) mode, you cannot select , and c.
• If you use the Face Detection function when , is selected, the mode
is automatically set to d.
• A pre-flash discharges when using the red-eye reduction function.
Using the flash when capturing images at a close distance may cause
irregularities in the image due to the light distribution.
108
Four-way controller
4 button
1
Press the four-way controller
(4) in A mode.
2
MENU Cancel
OK OK
Press the 4 button.
Taking Pictures
The [Flash Mode] screen appears.
The flash mode changes each time
the button is pressed. You can also
change the setting using the four-way
controller (23).
3
Flash Mode
Auto
The setting is saved and the camera returns to capture mode.
About the red-eye phenomenon
Taking pictures using the flash may cause the subject’s eyes to appear red in
the resulting picture. This phenomenon occurs when the light from the flash is
reflected in the subject’s eyes. It can be reduced by illuminating the area around
the subject or moving closer to the subject and zooming out to a wider angle.
Setting the flash mode to c (Auto + Red-eye) or d (Flash On + Red-eye) is also
an effective way of reducing red eyes.
If the subject’s eyes appear red despite such precautions, they can be corrected
by the red-eye compensation function (p.191).
Saving the Flash Mode setting 1p.149
109
Selecting the Focus Mode
= Standard
q
Macro
1cm Macro
3
Taking Pictures
3 Pan Focus
s Infinity
This mode is used when the distance to the subject is from 50 cm
to ∞. The camera is focused on the subject in the autofocus area
when the shutter release button is pressed halfway.
This mode is used when the distance to the subject is from 10 cm
to 60 cm. The camera is focused on the subject in the autofocus
area when the shutter release button is pressed halfway.
This mode is used when the distance to the subject is from 1 cm
to 30 cm. The camera is focused on the subject in the autofocus
area when the shutter release button is pressed halfway.
This mode is used when you ask someone to take pictures for
you, or when taking pictures of the scenery through the window
of a car or train. The entire picture, from the front to the back, is
focused.
This mode is used for taking distant objects. The flash is set to
a (Flash Off).
\ Manual Focus This mode lets you adjust the focus manually.
Four-way controller
4 button
1
Press the four-way controller
(5) in A mode.
The [Focus Mode] screen appears.
The focus mode changes each time
the button is pressed. You can also
change the setting using the four-way
controller (23).
2
Focus Mode
Standard
MENU Cancel
OK OK
Press the 4 button.
The setting is saved and the camera returns to capture mode.
110
• In 9 (Green) mode, you can only select =, q, or 3.
•
(1cm Macro) is unavailable in X (Digital Wide) mode.
• The focus mode is fixed at s in S (Fireworks) mode.
• The noise from focusing is recorded when a focus mode other than 3
or s is selected in C (Movie) and
(Underwater Movie) modes.
• When [Auto Macro] is on and shooting with q selected, if the subject
is further than 60 cm away, the camera automatically focuses to ∞
(Infinity).
Saving the Focus Mode setting 1p.149
3
To Set the Manual Focus
1
Press the four-way controller (5) in A mode.
The [Focus Mode] screen appears.
2
3
Use the four-way controller (5) to select \.
Press the 4 button.
Focus Mode
Manual Focus
The central portion of the image is
magnified to full screen on the display.
MENU Cancel
4
Press the four-way controller
(23).
The \ indicator appears on the
display to indicate the approximate
distance to the subject. Use the fourway controller (23) to adjust the
focus using the indicator as a guide.
2 for distant focus
3 for closer focus
5
Taking Pictures
The procedure for setting the focus manually (\) is described below.
OK OK
2m
1
0.5
MENU
OK OK
\ indicator
Press the 4 button.
The focus is fixed and the camera returns to capture mode.
After the focus is fixed, you can press the four-way controller (5) again
to display the \ indicator and readjust the focus.
111
The shooting mode and drive mode cannot be changed while the \
indicator is displayed.
To switch from \ to another focus mode, press the four-way controller
(5) while the \ indicator is displayed.
Changing the Focusing Area (= area)
3
You can change the autofocus area (Focusing Area).
Taking Pictures
J Multiple
K Spot
W Automatic Tracking AF
1
Normal autofocus area
The autofocus area becomes smaller.
Keeps moving subjects in focus.
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [AF Setting].
Press the four-way controller (5).
The [AF Setting] screen appears.
4
5
Use the four-way controller (23) to select [Focusing
Area].
Press the four-way controller
(5).
A pull-down menu appears.
AF Setting
Focusing Area
Auto Macro
Focus Assist
MENU Cancel
6
7
Use the four-way controller (23) to change the
Focusing Area.
Press the 4 button.
The setting is saved.
112
OK OK
8
Press the 3 button twice.
The camera returns to capture mode.
• In C (Movie),
(Underwater Movie) and N (Frame Composite)
modes, W cannot be selected.
• In S (Fireworks), 9 (Green) and b (Auto Picture) modes, the
focusing area is fixed at J.
Setting the Auto Macro
1
3
Taking Pictures
When [Auto Macro] is on, the focus is adjusted to the macro range
(distance to the subject is 10 cm to 60 cm) as necessary, even if the
focus mode setting is AF (Standard).
When it is off and the focus mode is set to Standard (=), the AF operates
only in the standard range, and focusing is not done in the macro range.
When the focus mode is set to Macro or 1cm Macro, the focus is only
adjusted in the respective macro range and is not done in the standard
range.
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [AF Setting].
Press the four-way controller (5).
The [AF Setting] screen appears.
4
Use the four-way controller
(23) to select [Auto Macro].
AF Setting
Focusing Area
Auto Macro
Focus Assist
MENU
5
Use the four-way controller (45) to select [O (On)/P (Off)].
The setting is saved.
6
Press the 3 button twice.
The camera returns to capture mode.
113
Setting the = Assist Light (Focus Assist)
The camera automatically emits the Focus assist light in dark shooting
situations. You can set the light to on or off.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
3
2
3
Use the four-way controller (23) to select [AF Setting].
Press the four-way controller (5).
The [AF Setting] screen appears.
Taking Pictures
4
Use the four-way controller
(23) to select [Focus
Assist].
AF Setting
Focusing Area
Auto Macro
Focus Assist
MENU
5
Use the four-way controller (45) to select [O (On)/P (Off)].
The setting is saved.
6
Press the 3 button twice.
The camera returns to capture mode.
Looking at the light directly will not create a safety hazard. However, do
not look into the emitter from a very short distance since you may feel
dazzled.
The camera does not emit the Focus Assist light under the following
conditions.
• In C (Movie),
(Underwater Movie) or S (Fireworks) mode
• When the focus mode is set to 3 (Pan Focus), s (Infinity) or z
(Manual Focus).
114
Setting the Image Tone
For setting the tone of images.
You can select from [Bright], [Natural], or [Monochrome].
The default setting is [Bright].
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller
(23) to select a finishing
tone.
Rec. Mode
Image Tone
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
MENU Cancel
5
1/4
Bright
Natural
Monochrome
AWB
Taking Pictures
3
Use the four-way controller (23) to select [Image
Tone].
OK OK
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
• When [Monochrome] is selected, [Tone Adjustment] appears on the
[A Rec. Mode] menu for setting the tone of monochrome images
instead of [Saturation].
• Select [Monochrome] in
(Report) mode to fix the Tone Adjustment
setting to [Standard].
115
Selecting the Number of Recorded Pixels
Taking Pictures
Recorded Pixels
g
Expected Usage
4288×3216
For printing high quality photos or A4-size pictures or
larger, or editing images on a computer.
j 3216×3216
i 4224×2376
6
3072×2304
3072×1728
f
2592×1944
2592×1464
h
Clearer
3
You can choose recorded pixels settings for still pictures.
The larger the number of recorded pixels, the clearer the details will appear
when you print your picture. As the quality of the printed picture also
depends on the image quality, exposure control, resolution of the printer,
and other factors, you do not need to select more than the required number
of recorded pixels. h is adequate for making postcard-size prints. The
more pixels there are, the larger the picture and the bigger the file size.
Refer to the following table for the appropriate settings according to
expected usage.
2048×1536
h 1920×1080
V
1280×960
l
1024×768
m
640×480
For making postcard-size prints.
For posting on a website or attaching to e-mail.
• The default setting is g.
• V (1280×960) can only be set for recorded pixels when
V does not appear in the Recorded Pixels menu.
If you select i/
/
/
h, the aspect ratio of the screen is
16:9. The monitor display for recording
and playback is as shown on the right.
P
38
116
(Report) mode is set.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Recorded
Pixels].
Press the four-way controller (5).
A pull-down menu appears.
4
Recordable Image No.
Image Tone
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
MENU Cancel
5
12
14M
10M
10M
7M
5M
5M
OK OK
Press the 4 button.
The setting is saved.
6
3
Taking Pictures
Use the four-way controller
(23) to change the number
of recorded pixels.
Press the 3 button.
The camera returns to capture mode.
• The number of recorded pixels for images captured in 9 (Green)
mode is fixed at g.
• The number of recorded pixels for images captured in N (Frame
Composite) is fixed at h/h.
• The number of recorded pixels for images captured in X (Digital
Wide) mode is fixed at f. (The number of recorded pixels will be h
if you exit Digital Wide mode without taking the second picture.)
• The number of recorded pixels for images shot in
(Report) mode
is set to V (1280×960).
• If you take and save only the first frame in F (Digital Panorama)
mode, the number of recorded pixels is fixed at i.
• The number of recorded pixels for images captured in c (Digital SR)
mode is fixed at f/
.
• The number of recorded pixels for images captured in
(Digital
Microscope) mode is fixed at h.
117
Selecting the Quality Level of Still Pictures
Select the quality (data compression ratio) for still images according to
how the images will be used.
The more stars (E), the higher the quality of the image, but the file size
increases. The selected Recorded Pixels setting also affects the size of
the image file (1p.116).
Quality Level
C
Best
D
Better
E
Good
3
Taking Pictures
1
Lowest compression ratio. Suitable for photo prints.
Standard compression ratio. Suitable for viewing the image
on a computer screen. (default setting)
Highest compression ratio. Suitable for attaching to e-mails
or creating websites.
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Quality
Level].
Press the four-way controller (5).
The pull-down menu appears.
4
Use the four-way controller
(23) to change the quality
level.
The maximum number of pictures you
can take is displayed at the top of the
screen when you select a quality
level.
5
Recordable Image No.
Image Tone
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
‫ڎڎڎ‬
‫ڎڎ‬
‫ڎ‬
MENU Cancel
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera is ready for taking pictures.
In 9 (Green) mode, the quality level is fixed at D (Better).
118
12
Bright
14M
OK OK
Adjusting the White Balance
You can take pictures in natural colors by adjusting the white balance
according to the light conditions at the time of shooting.
Auto
G
l
Daylight
The camera adjusts the white balance automatically.
Use this mode when taking pictures outside in sunlight.
Shade
Use this mode when taking pictures outside in the shade.
I
Tungsten Light
J
Fluores. Light
K
Manual
Use this mode when taking pictures under electric or other
tungsten light.
Use this mode when taking pictures under fluorescent
light.
Use this mode when adjusting the white balance manually.
• Set another white balance if you are not satisfied with the color
balance of pictures taken with the white balance set to F.
• Depending on the selected shooting mode, the white balance setting
may not be changed. Refer to “Functions Available for Each Shooting
Mode” (p.266) for details.
1
3
Taking Pictures
F
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [White
Balance].
Press the four-way controller (5).
The [White Balance] screen appears.
4
Use the four-way controller
(23) to change the setting.
You can check the results of available
white balance settings on the preview
image each time you press the fourway controller.
5
White Balance
Auto
MENU Cancel
OK OK
Press the 4 button.
The setting is saved.
119
6
Press the 3 button.
The camera returns to capture mode.
Refer to the following “Manual Setting” for instructions on adjusting the
white balance manually.
If you change the [White Balance] setting frequently, you can save time
by assigning the Fn settings to the Green button (p.130).
Saving the White Balance setting 1p.149
3
Taking Pictures
Manual Setting
Have a blank sheet of white paper or similar material ready.
1
2
3
In the [White Balance] screen, use the four-way
controller (23) to select K (Manual).
Point the camera at the blank
sheet of paper or other
material so that it fills the
frame displayed in the center
of the screen.
White Balance
SHUTTER Adjust
MENU Cancel
OK OK
Press the shutter release button fully.
The white balance is automatically adjusted.
4
Press the 4 button.
The setting is saved and the screen returns to the [A Rec. Mode]
menu.
5
Press the 3 button.
The camera returns to capture mode.
120
Setting the AE Metering
You can set the area of the screen where the brightness is metered to
determine the exposure.
L
M
N
2
3
4
The camera divides the image into 256 areas, meters the
brightness and determines the exposure.
The camera takes a reading of the overall brightness of the
picture with the center of the image having more influence
on the exposure.
The camera determines the exposure by metering the
brightness only at the center of the image.
3
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
Use the four-way controller (23) to select [AE Metering].
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller
(23) to select a metering
method.
Rec. Mode
1/4
Image Tone
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Bright
14M
MENU Cancel
5
Press the 4 button.
6
Press the 3 button.
Taking Pictures
1
Multi-segment
metering
Centerweighted
metering
Spot AE
metering
‫ڎڎ‬
OK OK
The setting is saved.
The camera returns to capture mode.
• When the shutter release button is pressed halfway, the brightness is
metered and the exposure is determined.
• When the subject is outside the focusing area and you want to use
Spot AE metering, aim the camera at the subject and press and hold
the shutter release button halfway to lock the exposure, then compose
your picture again and press the shutter release button fully.
• Depending on the selected shooting mode, the [AE Metering] setting
may not be changed. Refer to “Functions Available for Each Shooting
Mode” (p.266) for details.
Saving the AE Metering setting 1p.149
121
Setting the Sensitivity
You can select the sensitivity to suit the brightness of the surroundings.
AUTO
80
100
200
400
800
1600
3200
6400
3
Taking Pictures
1
The sensitivity is automatically adjusted by the camera.
(Default value: sensitivity 80-800)
The lower the sensitivity, the less noise that affects the image. The
shutter speed will be slower in low light conditions.
Higher sensitivity settings use faster shutter speeds in low light
conditions to reduce camera shake, but the image may be affected
by noise.
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Sensitivity].
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller
(23) to change the
sensitivity.
Rec. Mode
Sensitivity
AUTO ISO Range
EV Compensation
Movie
D-Range Setting
Pixel Track SR
MENU Cancel
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
122
2/4
AUTO
80
100
200
400
OK OK
• When the sensitivity is set to 3200 or 6400, the number of recorded
pixels is fixed at f (2592×1944)/
(2592×1464).
• When set to c (Digital SR), 9 (Green), C (Movie), or
(Underwater Movie) mode, only [AUTO] is available.
• When set to S (Fireworks) mode, the sensitivity is fixed at 80.
• When the shooting mode is set to
(Report), the AUTO is fixed at
80-6400. Other sensitivities can also be selected.
Saving the Sensitivity setting 1p.149
3
Setting AUTO ISO Range
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [AUTO ISO
Range].
Taking Pictures
Set the sensitivity range when the sensitivity is set to AUTO.
The sensitivity can be set to 80-100, 80-200, 80-400, 80-800, and 80-1600.
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller
(23) to select the sensitivity
adjustment range.
Rec. Mode
Sensitivity
AUTO ISO Range
EV Compensation
Movie
D-Range Setting
Pixel Track SR
MENU Cancel
5
2/4
AUTO
ISO80-100
ISO80-200
ISO80-400
ISO80-800
ISO80-1600
OK OK
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
When the Sensitivity is set to 80 or 100 and Highlight Correction is set to
O (On), the setting changes to 160. The setting returns when Highlight
Correction is set to P (Off).
123
Setting the Exposure (EV Compensation)
For adjusting the overall brightness of the picture.
Use this function to take pictures that are intentionally overexposed or
underexposed.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Taking Pictures
3
Use the four-way controller (23) to select [EV
Compensation].
Use the four-way controller
(45) to select the EV value.
To brighten, select a positive (+)
value. To darken, select a negative
(–) value.
You can choose the EV setting in the
range of –2.0 EV to +2.0 EV in 1/3 EV
steps.
4
Rec. Mode
Sensitivity
AUTO ISO Range
EV Compensation
Movie
D-Range Setting
Pixel Track SR
2/4
AUTO
ISO80-800
0.0
MENU Exit
Press the 3 button.
The camera returns to capture mode.
• When a histogram is displayed in Still Picture Capture mode or
Playback mode, you can check whether the exposure is correct (p.30).
• EV Compensation cannot be used in b (Auto Picture) or 9 (Green)
mode.
Saving the EV Compensation setting 1p.149
124
Correcting the Brightness (D-Range Setting)
Expands the dynamic range and prevents bright and dark areas from
occurring. [Highlight Correction] adjusts the bright areas when the image
is too bright and [Shadow Correction] adjusts the dark areas when the
image is too dark.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Press the four-way controller (5).
The [D-Range Setting] screen appears.
4
Use the four-way controller
(23) to select [Highlight
Correction] or [Shadow
Correction].
D-Range Setting
Highlight Correction
Shadow Correction
3
Taking Pictures
3
Use the four-way controller (23) to select [D-Range
Setting].
MENU
5
6
Use the four-way controller (45) to select O or P.
Press the 3 button twice.
The camera returns to capture status.
The D-Range Setting icon appears on
the display.
P
Q
O
When [Highlight Correction] is set
to O
When [Shadow Correction] is set to
O
When [Highlight Correction] and
[Shadow Correction] are set to O
P
38
• When the Sensitivity is set to 80 or 100 and Highlight Correction is set
to O (On), the setting changes to 160. The setting returns when
Highlight Correction is set to P (Off).
• If you change the [Highlight Correction] or [Shadow Correction] setting
frequently, you can save time by assigning it to the Green button (p.130).
125
D-Range settings are not applicable in b (Auto Picture)/9 (Green)
modes.
Setting Pixel Track SR
You can set this function to correct for camera shake when taking still
shots. If Pixel Track SR is set to O (On), the camera automatically
corrects for camera shake in the images you shot. The default setting is
P (Off).
Shake reduction settings in C (Movie) and
(Underwater Movie)
mode are configured under Movie SR (p.144).
3
Taking Pictures
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Pixel Track
SR].
Use the four-way controller
(45) to switch between
O (On) or P (Off).
Automatically corrects
for camera shake.
P (Off)
No correction for
camera shake.
The setting is saved.
O(On)
4
Rec. Mode
Sensitivity
AUTO ISO Range
EV Compensation
Movie
D-Range Setting
Pixel Track SR
2/4
AUTO
ISO80-800
0.0
MENU Exit
Press the 3 button.
The camera returns to capture mode.
• In 9 (Green), X (Digital Wide), F (Digital Panorama), C (Movie),
(Underwater Movie), N (Frame Composite) and S (Fireworks)
mode, the Pixel Track SR is fixed at P (Off).
• Pixel Track SR does not function when the flash discharges even if
[Pixel Track SR] is set to O (On).
The Pixel Track SR may not be effective when the shutter speed is slow.
We recommend you turn off the [Pixel Track SR] setting P (off) and use
a tripod for slow shutter speeds.
126
Setting the Interval Shooting
In this mode, a set number of pictures can be taken automatically at a
set interval from a set time.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller
(23) to select [Interval
Shoot].
Rec. Mode
3
Taking Pictures
Set the camera to take pictures at intervals. The
intervals can be set in increments of one second
from ten seconds to 4 minutes, or in 1 minute
Interval
10 sec. – 99 min.
increments from 4 to 99 minutes. You cannot set
the camera to take interval shots for less than ten
seconds.
Number
2 shots – number of You can set this to up to 1000 shots. However, it
of Shots
recordable images cannot exceed the number of recordable images.
You can set 1 minute increments for the first 59
minutes and 1 hour increments from there. If the
Start Delay 0 min. – 24 hours
start time is set to 0 minutes, the first picture is taken
as soon as the shutter release button is pressed.
3/4
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
MENU Exit
3
Press the four-way controller (5).
The [Interval Shoot] setting screen appears. [Interval] is marked with
the frame.
4
Set the interval.
Interval Shoot
1 Press the four-way controller
Interval
0min. 10 sec.
(5).
Number of Shots
2
2 Use the four-way controller (23)
Start Delay
0hr. 0 min.
to set the minutes, then press the
MENU
four-way controller (5).
3 Use the four-way controller (23)
to set the seconds, then press the four-way controller (5).
The setting is saved, and the frame returns to [Interval].
127
5
Press the four-way controller (3).
6
Set the number of shots.
The frame moves to [Number of Shots].
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set [Number of Shots],
then press the four-way controller (5).
The setting is saved, and the frame returns to [Number of Shots].
3
Taking Pictures
7
Press the four-way controller (3).
8
Set the start delay.
The frame moves to [Start Delay].
Interval Shoot
1 Press the four-way controller
Current Time
10:00
(5).
Start Time
10:00
The current time and the recording
0 hr. 0 min.
Start Delay
start time are displayed in real-time.
2 Use the four-way controller (23)
MENU Cancel
OK OK
to set the hours, then press the
four-way controller (5).
3 Use the four-way controller (23) to set the minutes, then press
the four-way controller (5).
The setting is saved, and the frame returns to [Start Delay].
9
Press the 3 button twice.
The camera returns to the shooting screen. The operations up to this
point have only configured the [Interval Shoot] settings. To actually use
interval shooting, you must select [Interval Shoot] from the drive mode.
Taking Pictures at a Set Interval (Interval Shoot) 1p.99
• Interval Shoot is unavailable in b (Auto Picture), 9 (Green),
F (Digital Panorama), X (Digital Wide), S (Fireworks) and
O (Voice Recording) modes.
• Refer to p.145 for instructions on interval shooting for C (Movie) and
(Underwater Movie).
• Even if an alarm is set, the alarm will not ring while interval shooting is
being performed.
• Interval Shoot stops if the SD Memory Card is removed or inserted
during standby.
The Interval Shoot settings can also be configured from the Drive Mode
(p.99).
128
Setting Blink Detection
This specifies whether Blink Detection works when you use the Face
Detection function. The default setting is O (On).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Blink
Detection].
Blink Detection function
works.
P (Off)
Blink Detection function
does not work.
The setting is saved.
O(On)
4
3
Rec. Mode
3/4
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
MENU Exit
Taking Pictures
Use the four-way controller
(45) to switch between O
(On) or P (Off).
Press the 3 button.
The camera returns to capture mode.
Blink Detection 1p.68
If the Blink Detection function detected closed eyes when shooting,
[Closed eyes have been detected] is displayed for 3 seconds during
Instant Review.
129
Setting the Instant Review
Use this setting to specify whether or not an Instant Review is displayed
immediately after images are shot. The default setting is O (On: displays
the image).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Taking Pictures
3
Use the four-way controller (23) to select [Instant
Review].
Use the four-way controller
(45) to switch between O
(On) or P (Off).
O (On)
Instant Review is
displayed.
P (Off)
Instant Review is not
displayed.
The setting is saved.
4
Rec. Mode
3/4
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
MENU Exit
Press the 3 button.
The camera returns to capture mode.
Instant Review 1p.68
Setting the Green Button
You can assign one of the following functions to the Green button:
[Green Mode] (p.77), [Voice Recording] (p.208), [Movie] (p.141) or [Fn
Setting] (p.132). You can activate the assigned function by just pressing
the Green button.
When the shooting mode is set to 9 (Green) Mode, [Green Button]
settings cannot be configured on the [A Rec. Mode] menu. To configure
the settings, first switch to a mode other than 9.
130
Assigning a Function
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Press the four-way controller
(23) to select [Green
Button].
Rec. Mode
3/4
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
3
MENU Exit
Taking Pictures
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller
(23) to select a function you
want to assign.
Green Button
Green Mode
Voice Recording
Movie
Fn Setting
MENU Cancel
5
OK OK
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
• [Green Mode] is registered as the default setting.
• If you select [Movie] for both [Fn Setting] and Capture Mode, the Green
Button does not function because the modes are the same.
131
Registering Frequently Used Functions (Fn Setting)
You can register frequently used functions on the four-way controller.
Using this function, you can directly set the functions by pressing the
four-way controller without displaying the menu in Capture mode.
In [Fn Setting], still picture mode and Movie mode have different settings.
To execute [Fn Setting] in movie mode, press the MENU button in Movie
mode in step 1 on page p.131.
4
3
Use the four-way controller
(23) to select [Fn Setting].
Green Button
Taking Pictures
+
+
+
+
Green Mode
Voice Recording
Movie
Recorded
Fn SettingPixels
Quality Level
WBWhite Balance
MENU Cancel
5
OK OK
Press the 4 button.
The [Fn Setting] screen appears.
6
Use the four-way controller
(23) to select a key you want
to assign a function to.
Green Button
Fn Setting
+
+
+
+
EV Compensation
Recorded Pixels
Quality Level
WB White Balance
MENU
7
Press the four-way controller (5).
A pull-down menu appears.
8
Use the four-way controller
(23) to select the function
you want to register.
Green Button
+
+
+
+
EV Compensation
Recorded Pixels
Quality Level
WB White Balance
ISO Sensitivity
AF Focusing Area
MENU Cancel
9
Press the 4 button.
The setting is saved.
132
OK OK
10 Press the 3 button twice.
The camera returns to capture mode.
This function is activated only when you assign the [Fn Setting] to the
Green button.
You can assign only one function to each key.
The default settings for Fn settings
3
Movie mode
(2) Movie SR
(3) EV Compensation
(4) Recorded Pixels
(5) White Balance
Functions that can be assigned to each key
Selectable
items
Taking Pictures
Default setting
Still picture mode
(2) EV Compensation
(3) Recorded Pixels
(4) Quality Level
(5) White Balance
Still picture mode
Movie mode
EV Compensation
Recorded Pixels
Recorded Pixels
Movie SR
Quality Level
White Balance
White Balance
Focusing Area
Sensitivity
EV Compensation
Focusing Area
Sharpness
Auto Macro
Saturation (Tone Adjustment) *
AE Metering
Contrast
Highlight Correction
Shadow Correction
Sharpness
Saturation (Tone Adjustment) *
Contrast
* The items displayed change depending on the [Image Tone] selected
on the [A Rec. Mode] menu. When you have selected either [Bright]
or [Natural], [Saturation] is displayed, and when [Monochrome] is
selected, [Tone Adjustment] is displayed.
133
Changing Assigned Items
Press the Green button in the shooting mode to display the Fn Setting
screen. Select an item with the four-way controller (2345), and press
either the (23) or (45) four-way controller to change the settings.
Setting the Image Sharpness (Sharpness)
You can give the image sharp or soft outlines.
3
1
Press the 3 button in A mode.
Taking Pictures
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Sharpness].
Use the four-way controller
(45) to change the
sharpness level.
F Soft
G Normal
H Sharp
4
Rec. Mode
Sharpness
Saturation
Contrast
Date Imprint
IQ Enhancer
Macro Light
4/4
Off
MENU Exit
Press the 3 button.
The setting is saved and the camera returns to capture mode.
134
Setting the Saturation/Tone Adjustment
You can set either color brightness (Saturation) or the tone of
monochrome images (Tone Adjustment).
The items displayed change depending on the [Image Tone] selected on
the [A Rec. Mode] menu.
Selected Image Tone
Bright, Natural
Monochrome
3
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Saturation]
(Tone Adjustment).
Use the four-way controller
(45) to select the level of
saturation (or tone).
F
G
H
4
Low
(Blue for tone)
Normal (B&W for tone)
High
(Sepia for tone)
Rec. Mode
Sharpness
Saturation
Contrast
Date Imprint
IQ Enhancer
Macro Light
4/4
Taking Pictures
1
Displayed item
Saturation
Tone Adjustment
Off
MENU Exit
Press the 3 button.
The setting is saved and the camera returns to capture mode.
135
Setting the Image Contrast (Contrast)
For setting the image contrast level.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
3
Use the four-way controller (23) to select [Contrast].
Use the four-way controller
(45) to change the contrast
level.
Taking Pictures
F Low
G Normal
H High
4
Rec. Mode
Sharpness
Saturation
Contrast
Date Imprint
IQ Enhancer
Macro Light
4/4
Off
MENU Exit
Press the 3 button.
The setting is saved and the camera returns to capture mode.
Setting the Date Imprint Function
You can choose whether to imprint the date and/or time when taking still
pictures.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Date Imprint].
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller
(23) to select the Date
Imprint details.
Choose from [Date], [Date & Time],
[Time] or [Off].
Rec. Mode
Sharpness
Saturation
Contrast
Date Imprint
IQ Enhancer
Macro Light
MENU Cancel
136
4/4
Date
Date & Time
Time
Off
OK OK
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
• The date and/or time imprinted with the [Date Imprint] function cannot
be deleted.
• Note that if the printer or the image editing software is set to print the
date and the images to be printed already have the date and/or time
imprinted, the imprinted dates and/or times may overlap.
Setting the IQ Enhancer Processing
You can take pictures with clearer details by using image processing
with IQ enhancer technique.
1
3
Taking Pictures
• O appears on the display in A mode when [Date Imprint] is set to
any setting other than [Off].
• The date and/or time are imprinted on the picture with the display
format set in the [Date Adjustment] screen (p.49).
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select
[IQ Enhancer].
Use the four-way controller
(45) to select [O (On)/
P (Off)].
O (On)
IQ enhancer function
works
P (Off)
IQ enhancer function
does not work
The setting is saved.
4
Rec. Mode
Sharpness
Saturation
Contrast
Date Imprint
IQ Enhancer
Macro Light
4/4
Off
MENU Exit
Press the 3 button.
The camera returns to capture mode.
137
IQ enhancer does not function in the following situations:
• When the sensitivity is set to 3200 or 6400
• In the c (Digital SR) mode
• When the drive mode is set to c (Burst Shooting)
Setting the Macro Light
Set whether or not to turn on the macro lights around the lens.
The macro lights turn on when the [Macro Light] is set to O (On).
The default setting is P (Off).
3
Taking Pictures
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Macro
Light].
Use the four-way controller
(45) to select [O (On)/
P (Off)].
O (On)
Turns on the light
P (Off)
Turns off the light
The setting is saved.
4
Rec. Mode
Sharpness
Saturation
Contrast
Date Imprint
IQ Enhancer
Macro Light
4/4
Off
MENU Exit
Press the 3 button.
The camera returns to capture mode.
• In
(Digital Microscope) mode, the macro lights turn on regardless of
whether the setting is turned on or off.
• If the Power Saving is set to on, the light turns off after the set time.
• The macro lights turn off during playback and when using the USB
connector except when outputting video in Digital Microscope mode.
• Self-portrait Assist and Self-portrait Assist + Smile Capture cannot be
selected when [Macro Light] is set to O (On).
If you take a picture using Self Timer or Remote Control while [Macro
Light] is set to O (On), the macro lights remain on regardless of the
countdown.
138
Taking Pictures Underwater
Taking Underwater Pictures (Underwater Mode/
Underwater Movie Mode)
This camera complies with JIS waterproof grade 8 and can be used to
take pictures at a depth of 10 m continuously for 2 hours. In addition, this
camera complies with JIS dustproof grade 6 (IP68).
Shutter release
button
Four-way controller
4 button
1
2
3
Taking Pictures
Use the Underwater mode to take underwater still pictures that capture the
blueness of the sea.
Use the Underwater Movie mode to record movies underwater.
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
Use the four-way controller (2345) to select
(Underwater) or
(Underwater Movie).
3
Press the 4 button.
4
Press the shutter release button halfway.
5
Press the shutter release button fully.
The shooting mode is selected and the camera returns to capture mode.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
If you selected
, the picture is taken.
If you selected
, recording starts. To stop recording, press the
shutter release button fully. Perform the same steps as C (Movie)
mode to record movies.
Recording Movies 1p.141
139
• Before taking pictures underwater, make sure that there is no dirt or
sand on the waterproof seal of the battery/card and terminal covers
and check that the covers are securely locked.
• Before opening the battery/card and terminal covers after using the
camera underwater, make sure that there is no water, dirt, or sand on
the covers or anywhere else on the camera. Wipe the camera before
opening the covers.
• In
mode, AE metering is set to multi-segment metering.
Regarding Waterproof, Dustproof, and Shockproof Design 1p.9
3
Taking Pictures
140
• The flash will not discharge in
mode.
• When the Focus Mode is set to \, you can adjust the focus before
recording starts and during recording.
• Optical and digital zoom can be used in Underwater Movie mode
before recording starts. Digital Zoom can also be used during
recording.
Although the camera is designed to be waterproof and dustproof, avoid
using the camera under the following conditions. It may momentarily be
subjected to water pressure beyond that covered in the guarantee and
water may enter the interior of the camera.
• Jumping into the water while holding the camera
• Swimming while holding the camera in your hand
• Using the camera in environments where water is applied forcefully,
such as strong river currents and waterfalls
Recording Movies
Recording Movies
This mode enables you to record movies. Sound is recorded at the same
time.
Shutter release button
w/x button
3
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller
(2345) to select C
(Movie).
Taking Pictures
Four-way controller
4 button
1/2
Movie
For recording movies
MENU Cancel
3
Press the 4 button.
OK OK
1
C (Movie) mode is selected and the
camera returns to capture mode.
The following information appears on
the display.
1 Movie mode icon
REC
2 Movie shake reduction icon
07:34
3 Remaining recordable time
3
2
4
4 REC indicator (blinks during
recording)
5 Focus frame (does not appear during recording)
5
141
You can change the captured area by pressing the w/x button.
x Enlarges the subject
w Widens the area that is captured by the camera
4
Press the shutter release button fully.
Recording starts. You can continue recording until the built-in memory
or the SD Memory Card is full, or the size of the recorded movie
reaches 2 GB.
5
3
Press the shutter release button fully.
Recording stops.
Taking Pictures
Playing Back a Movie 1p.152
• The flash does not discharge in C (Movie) and
(Underwater
Movie) modes.
• The focus mode can be changed before recording starts.
• When the focus mode is set to \(Manual Focus), you can adjust the
focus before recording starts.
• Optical and digital zoom can be used before recording starts. Digital
zoom is available during recording when digital zoom (p.81) is set to
O (On).
• When the shooting mode is set to C (Movie) or
(Underwater
Movie), Face Detection is automatically set to on. You can select Smile
Capture or Face Detection Off by pressing the I button before
starting recording a movie (p.71). When Smile Capture function is
activated, movie recording starts automatically when the camera
recognizes the subject’s smile. However, depending on the condition
of the recognized faces, movie recording may not start automatically
because the Smile Capture function may not work. If this happens,
press the shutter release button to start movie recording.
• The volume of recorded audio may vary depending on the orientation
of the microphone, which is on the front of the camera.
• You can record a movie using the remote control unit (optional) (p.97).
• When you change the display by pressing the 4/W button
while recording a movie, the histogram is not displayed.
Keeping the Shutter Release Button Pressed
If you keep the shutter release button pressed for more than one second,
recording will continue as long as you keep the button pressed. Shooting
stops when you take your finger off the shutter release button.
142
Selecting the Number of Recorded Pixels and
Frame Rate for Movies
You can choose the number of recorded pixels and frame rate settings
for movies.
The more pixels there are, the clearer the details and the bigger the file
size. The more frames per second, the better the quality of the movie,
but the file size becomes larger.
Recorded
Pixels
Frame
Rate
Use
M
1280×720
30 fps
Records images in HDTV format (16:9). Movement
is recorded smoothly. (default setting)
F
1280×720
15 fps
Records images in HDTV format (16:9). Increases
the total recording time by making the file size
smaller.
G
640×480
30 fps
Records images in VGA format (4:3). Movement is
recorded smoothly.
H
640×480
15 fps
Records images in VGA format (4:3). Increases the
total recording time by making the file size smaller.
I
320×240
30 fps
Suitable for posting on a website or attaching to email. Movement is recorded smoothly.
J
320×240
15 fps
Suitable for posting on a website or attaching to email. Increases the total recording time by making
the file size smaller.
3
Taking Pictures
Setting
* The frame rate (fps) indicates the number of frames per second.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Movie].
Press the four-way controller (5).
The [Movie] screen appears.
4
5
Use the four-way controller (23) to select [Recorded
Pixels].
Press the four-way controller (5).
A pull-down menu appears.
143
6
Use the four-way controller
(23) to change the number
of recorded pixels and frame
rate.
Rec. Time
MENU Cancel
7
02:26
Recorded Pixels
Movie SR
Interval Shoot
OK OK
Press the 4 button.
The setting is saved.
3
8
Press the 3 button twice.
Taking Pictures
The camera returns to capture mode.
The following restrictions may cause the selected recording time and the
actual recording time to be different.
• The maximum size of a file is limited to 2 GB.
Setting the Movie SR (Movie Shake Reduction)
Function
In C (Movie) mode, you can compensate for camera shake while you are
recording a movie with the Movie SR (Movie Shake Reduction) function.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Movie].
Press the four-way controller (5).
The [Movie] screen appears.
4
144
Use the four-way controller (23) to select [Movie SR].
5
Use the four-way controller
(45) to select O (On) or
P (Off).
Automatically corrects
for camera shake.
P (Off)
No correction for
camera shake.
The setting is saved.
Movie
Recorded Pixels
Movie SR
Interval Shoot
O(On)
6
MENU
Press the 3 button twice.
3
The camera returns to capture mode.
In this mode, you can record multiple still pictures taken automatically at
a set interval from a set time, as a movie file.
Interval
You can set this to 1 minute, 5 minutes, 10 minutes, 30 minutes, or 1 hour.
Set the total time, from 10 minutes to 359 hours. The total time and the
Total Time settable units change depending on the interval set. The Interval can be set
in increments of 1 minute, 5 minutes, 10 minutes, 30 minutes, or 1 hour.
Set the start delay, from 0 minutes to 24 hours. The start delay can be
set in increments of 1 minute for a delay time up to 59 minutes, and
Start Delay increments of 1 hour for a delay time longer than one hour. If the start
time is set to 0 minutes, the first picture is taken as soon as the shutter
release button is pressed.
Taking Pictures
Recording a Movie from Pictures Taken at a Set
Interval (Interval Movie)
Setting from Drive Mode
1
2
Press the four-way controller (2) in C or
Use the four-way controller
(45) to select k (Interval
Shoot) and press the 4
button.
The current Interval Movie setting
appears for approximately one
minute. To take pictures with the
current settings, go to step 10.
mode.
Drive Mode
Interval Shoot
MENU Cancel
OK OK
145
3
Press the 4 button while the settings are displayed.
The Interval Movie setting screen appears. [Interval] is marked with the
frame.
4
Set the interval.
1 Press the four-way controller (5).
A pull-down menu appears.
2 Use the four-way controller (23)
to set the interval, then press the
4 button.
The frame returns to [Interval].
3
Taking Pictures
5
Interval Shoot
Interval
1min.
Total Time
0hr. 10 min.
Start Delay
0hr.
0 min.
MENU
Press the four-way controller (3).
The frame moves to [Total Time].
6
Set the total time.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set the hours, then press
the four-way controller (5).
3 Use the four-way controller (23) to set the minutes, then press
the four-way controller (5).
The frame returns to [Total Time].
7
Press the four-way controller (3).
The frame moves to [Start Delay].
8
Set the start delay.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set the hours, then press
the four-way controller (5).
3 Use the four-way controller (23) to set the minutes, then press
the four-way controller (5).
The frame returns to [Start Delay].
9
Press the 3 button.
The Interval movie setting is saved and the camera returns to capture
mode.
146
10 Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
11
Press the shutter release button fully.
Interval movie recording starts.
The LCD turns off between shots (during standby). Press the power
switch during standby to display the remaining time and interval on the
monitor.
The [Stop interval shooting?] message is displayed when the power
switch and then the 3 button are pressed during standby.
Pressing the 4 button cancels interval movie.
You can set the Interval Movie from [A Rec. Mode] menu.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Taking Pictures
Setting from Menu
3
Use the four-way controller (23) to select [Movie].
Press the four-way controller (5).
The [Movie] screen appears.
4
Use the four-way controller
(23) to select [Interval
Shoot].
Movie
Recorded Pixels
Movie SR
Interval Shoot
MENU
5
Press the four-way controller (5).
The interval movie setting screen appears. The rest of the procedure
is the same as steps 4-11 in “Setting from Drive Mode”. See those
procedures if you need more information.
147
3
• Confirm that the battery is sufficiently charged before starting interval
movie recording. If the battery is not sufficiently charged, it may
become depleted during interval movie recording and cause recording
of the movie to stop.
• When performing interval movie shooting, the settings are fixed as
follows; Recorded Pixels: V (1280×720), Quality Level: C, Movie
SR: P (Off), and Flash Mode: a. However, shooting is done at a frame
rate according to the recorded pixels (p.143) set on the Movie menu.
• Interval Shoot stops if the SD Memory Card is removed or inserted
during standby.
• Sound cannot be recorded in Interval Movie mode.
• When you use the SD Memory Card, use SD Speed Class 4 or higher
cards.
Taking Pictures
• If you set a start delay, a start time corresponding to the current time
and the start delay you set is displayed in real time.
• The total time you can set differs according to the shooting interval you
set, as indicated in the table below.
Interval
1 min
5 min
10 min
30 min
1 hr
148
Total time that can be set
30 fps
15 fps
10 minutes to 5 hours and 59 10 minutes to 5 hours and 59
minutes
minutes
(in increments of 1 minute)
(in increments of 1 minute)
30 minutes to 29 hours and 15 minutes to 29 hours and 55
55 minutes
minutes
(in increments of 5 minutes) (in increments of 5 minutes)
1 hour to 59 hours and 50 30 minutes to 59 hours and 50
minutes
minutes
(in increments of 10 minutes) (in increments of 10 minutes)
3 hours to 179 hours and 30 1 hour and 30 minutes to 179
minutes
hours and 30 minutes
(in increments of 30 minutes) (in increments of 30 minutes)
6 hours to 359 hours
3 hours to 359 hours
(in increments of 1 hour)
(in increments of 1 hour)
Saving the Settings (Memory)
Item
Description
A Face Detection mode set by using the I
button.
The flash mode set with the four-way
Flash Mode
controller (4)
The drive mode set with the four-way
Drive Mode
controller (2)
The focus mode set with the four-way
Focus Mode
controller (5)
The zoom position set with the w/x
Zoom Position
button.
The manual focus position set with the fourMF Position
way controller (23)
The [White Balance] setting on the [A Rec.
White Balance
Mode] menu
The [Sensitivity] setting on the [A Rec.
Sensitivity
Mode] menu
The [EV Compensation] setting on the [A
EV Compensation
Rec. Mode] menu
The [AE Metering] setting on the [A Rec.
AE Metering
Mode] menu
The [Digital Zoom] setting on the [A Rec.
Digital Zoom
Mode] menu
The display information display mode set
DISPLAY
with the 4/W button
If a new SD Memory Card is inserted when
File No.
On has been selected, file numbers are
assigned sequentially.
Face Detection
Default
setting
Page
P
p.71
O
p.108
P
p.94 p.101
P
p.110
P
p.79
P
p.111
P
p.119
P
p.122
P
p.124
P
p.121
O
p.81
P
p.23
O
⎯
3
Taking Pictures
The Memory function is for saving the current camera settings when the
camera is turned off.
For some camera settings, the Memory function is always set to O (On) (the
settings are saved when the camera is turned off), while for others you can
choose on or off (to choose whether the settings are saved or not when the
camera is turned off). The items which can be set to On or Off in the Memory
function are shown in the table below. (Items not listed here are always
saved in the selected settings when the camera is turned off.)
If you select O (On), the settings will be saved in the status they were in
immediately before the camera was turned off. If you select P (Off), the settings
will be reset to the defaults when the camera is turned off. The table below also
shows whether the Memory default setting for each item is on or off.
149
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Use the four-way controller (23) to select [Memory].
Press the four-way controller (5).
The [Memory] screen appears.
4
Use the four-way controller
(23) to choose an item.
3
Taking Pictures
150
Memory
1/3
Face Detection
Flash Mode
Drive Mode
Focus Mode
Zoom Position
MF Position
MENU
5
6
Use the four-way controller (45) to select O (On) or P (Off).
Press the 3 button twice.
The camera returns to capture mode.
Playing Back Images
4Playing Back and
Deleting Images
Playing Back Still Pictures
Q button
Four-way controller
4 button
i button
4
Press the Q button after
taking a picture.
The camera enters the Q mode and
the image appears on the display.
Displaying one image in full in Q mode
(Q mode default setting) is called
single-image display.
File number
100 - 0038
Edit
To Play Back the Previous or Next Image
2
Press the four-way controller (45).
The previous or next image appears.
To Delete the Displayed Image
Press the i button while the image is
displayed to display the Delete screen.
Press the four-way controller (2) to select
[Delete] and press the 4 button.
Playing Back and Deleting Images
1
100-0017
Delete
Cancel
OK OK
For information on other deletion procedures 1p.165
151
Playing Back a Movie
You can play back the movies you have taken. The sound is played back
at the same time.
f/y button
Q button
Four-way controller
4
1
Playing Back and Deleting Images
2
Enter Q mode and use the four-way controller (45) to
choose the movie you want to play back.
Press the four-way controller
(2).
100 - 0017
000 : 30
Playback starts.
Edit
The following operations can be performed during playback.
Four-way controller (4)
Plays back in reverse
Four-way controller (2)
Pauses playback
Zoom button (y)
Increases the volume
Zoom button (f)
Reduces the volume
Press and hold the four-way controller (5) Fast-forwards playback
Press and hold the four-way controller (4) Fast-reverses playback
The following operations can be performed while playback is
paused.
Four-way controller (4)
Reverses the frame
Four-way controller (5)
Forwards the frame
Four-way controller (2)
Resumes playback
3
Press the four-way controller (3).
Playback stops.
152
Multi-Image Display
f/y button
Q button
3 button
Four-way controller
4 button
6-Image Display/12-Image Display
You can display 6 or 12 thumbnails of captured images at a time.
Press the f button in Q mode.
The 6-image display appears showing a page consisting of 6
thumbnail images. Pressing the f button again changes it to a
12-image display.
A page consisting of 6 or 12 thumbnail
images appears. The displayed
images change 6- or 12-images at a
time page by page.
Use the four-way controller (2345)
to move the frame. If there are too
many images to fit on one page,
pressing the four-way controller (24)
while image 1 is selected will display
the previous page. Similarly, if you
choose image 2 and press the fourway controller (35), the next page
appears.
♦ indicates that the previous or next
screen is stored in a separate folder.
1
2
Select & Delete
100-0010
6-Image Display
Folder divider icon
Frame
Playing Back and Deleting Images
1
4
1
2
Select & Delete
100-0010
12-Image Display
153
The icons that appear on the images indicate the following:
(No icon)
Still picture without sound
O (With image)
Still picture with sound
C
Movie (the first frame appears)
O (Without image) Sound files only
Press the 4 button to switch to single-image display of the selected
image.
Press the Q button to switch to A mode.
Folder Display/Calendar Display
4
Playing Back and Deleting Images
154
Press the f button in 12-image display to switch to folder or calendar
display. Press the Green button to switch between folder display and
calendar display.
1
Press the f button twice in Q mode.
The screen changes to 12-image display.
2
Press the f button.
The screen changes to folder display or calendar display.
Folder display
The list of folders with recorded
images and sound files appears.
Use the four-way controller (2345)
to move the frame.
If you select a folder and press the y
button or the 4 button, images in the
folder are displayed in 12-image
display.
Frame
101
102
105
106
103
104
101_0707
Calendar display
Recorded images and sound files are
Frame
displayed by date in calendar format.
1
2
The first image recorded on a date is
3
4
65
6
7
8
9
displayed for that date on the
10
11
12
15
16
13
14
calendar.
17
18
19
20
21
22
23
O appears for dates on which the first
24
25
26
27
28
29
30
recorded file was either sound-only
31
2013
data or a still picture with a voice
memo.
Use the four-way controller (2345) to move the frame.
If you select a date and press the y button, images taken on that date
are displayed in 12-image display.
Select a date and press the 4 button to switch to single-image
display of the first image recorded on that date.
SUN
MON
TUE
WED
THU
FRI
SAT
Using the Playback Function
1
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller
(2345) to choose an icon.
The guide for the selected function
appears below.
Slideshow
For continuously playing
back images. Screen or
sound effects can be set
MENU Cancel
3
1/2
Playing Back and Deleting Images
• Press the 3 button in folder display or calendar display to switch
to 12-image display.
• Press the Q button or half-press the shutter release button in folder
display or calendar display to switch to A mode.
4
OK OK
Press the 4 button.
The playback function is recalled.
155
100 - 0038
Edit
MENU
Slideshow
1/2
Playing Back and Deleting Images
MENU Cancel
1/2
Rotates captured images.
Useful when viewing
vertical images on a TV
For continuously playing
back images. Screen or
sound effects can be set
4
Image Rotation
OK OK
MENU Cancel
Press SHUTTER halfway
or
38
Closes the Playback Mode
Palette and goes to A mode.
OK OK
OK
MENU Cancel
OK OK
Goes to the screen for
selected playback function.
• When the frame is placed over an icon on the Playback Mode Palette,
a guide for that function appears.
• You can turn the guide display off for the function on the Playback
Mode Palette (p.236).
156
Playback Mode Palette
Playback Mode
u Slideshow
s Image Rotation
k Small Face Filter
Ink Rubbing Filter
Collage
P Digital Filter
E Original Frame
N Frame Composite
Save as
For saving one frame from a movie as a still picture
Still image
Movie Divide
For dividing a movie into two
[ Editing Movies
Adding
For adding a title picture to your movie
title picture
Red-eye
For compensating red-eye. May not work due to
Z Compensation
the condition of the image
Changes Recorded Pixels and Quality Level to
Resize
n
make the file size smaller
For cropping images to the size you like. Saved as
o Cropping
a new image
For copying images and sounds between the builtin
p Image/Sound Copy memory and SD memory card
Attaches sound to images. Recording is possible till
\ Voice Memo
the memory card is full
Protects images and sounds from accidental
Z Protect
deletion. Formatting will delete
For the print settings. Useful when printing at a
r DPOF
printing service
For setting a captured image as the Start-up
^ Start-up Screen
Screen
Page
p.158
p.161
p.178
p.185
p.186
p.180
p.195
p.192
p.200
p.191
p.176
p.177
p.203
p.212
4
Playing Back and Deleting Images
Description
For continuously playing back images. Screen or
sound effects can be set
Rotates captured images. Useful when viewing
vertical images on a TV
Reduces the size of faces in the image, for wellproportioned portraits
Creates an image similar to ink rubbing from
original pictures
Creates a collage print page from saved image files
For modifying images with a Color filter or Soft filter
Available to make from the kind and color of a
frame. Available to enter text
For composing an image with a frame. Select
Overwrite or Save as to save
p.169
p.205
p.238
157
Slideshow
You can play back recorded images and movies one after another.
1
2
Enter the Q mode and use the four-way controller
(45) to choose the image to start the slideshow with.
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select
u (Slideshow).
1/2
For continuously playing
back images. Screen or
sound effects can be set
4
Playing Back and Deleting Images
MENU Cancel
4
OK OK
Press the 4 button.
The slideshow setting screen appears.
5
Use the four-way controller
(23) to select [Start].
Slideshow starts
Start
Interval
Screen Effect
Sound Effect
MENU
6
3sec.
Wipe
OK OK
Press the 4 button.
The slideshow starts.
Pressing the 4 button during the slideshow pauses the slideshow.
To resume the slideshow, press the 4 button again.
7
Press any button other than the 4 button.
The slideshow stops.
158
Slideshow
To Set the Slideshow Conditions
You can set the playback interval and also a screen effect and sound
effect for when one image changes to the next.
1
Use the four-way controller
(23) to select [Interval] in
step 5 on p.158.
Start
Interval
Screen Effect
Sound Effect
3sec.
Wipe
MENU
2
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23) to change the interval
and press the 4 button.
Choose from [3sec.], [5sec.], [10sec.], [20sec.] or [30sec.].
4
Use the four-way controller (23) to select [Screen
Effect].
After selecting [Screen Effect], press the four-way controller (5). A
pull-down menu appears with the following items. Use the four-way
controller (23) to select an item and press the 4 button.
Wipe
Checker
Fade
Random
Off
5
6
The next image slides over the previous one from left to right
The next image appears in small square mosaic blocks
The current image gradually fades out and the next image
fades in
Various effects are used randomly
No effect
4
Playing Back and Deleting Images
3
Use the four-way controller (23) to select [Sound
Effect].
Use the four-way controller (45) to select O (On) or
P (Off).
Except when the [Screen Effect] is set to Off, you can choose O (On)
or P (Off) for the sound that is played when one image changes to the
next.
159
7
8
Use the four-way controller (23) to select [Start].
Press the 4 button.
The slideshow starts using the selected interval and effect.
4
Playing Back and Deleting Images
160
• The slideshow will continue until you press any button other than the
4 button.
• Movies or pictures with sound will be played through to the end before
the next picture is played back, regardless of the interval setting.
However, pressing the four-way controller (5) while playing back a
movie or a picture with sound skips to the next image.
• Sound files made in O (Voice Recording) are not played back in the
slideshow.
• Panorama images are displayed by scrolling from left to right in 4
seconds before the next picture is played back, regardless of the
Interval or Screen Effect setting.
• When [Random] is selected for the screen effect, the interval is fixed
and the sound effect is set to off. Also the sound of pictures with sound
will not be played back.
Connecting the Camera to AV Equipment 1p.172
Rotating the Image
Q button
Four-way controller
4 button
1
Press the Q button after taking a picture.
The image appears on the display.
4
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller (2345) to select
s (Image Rotation) and press the 4 button.
The rotation selection screen (0°, Right 90°, Left 90°, or 180°) appears.
4
Use the four-way controller
(2345) to choose the
rotation direction and press
the 4 button.
The rotated image is saved.
MENU Cancel
OK OK
• Panoramic images and movies cannot be rotated.
• Protected images can be rotated, but they cannot be saved in a rotated
state.
Playing Back and Deleting Images
2
161
Zoom Playback
You can magnify an image up to ten times.
f/y button
Q button
Four-way controller
4 button
4
1
Playing Back and Deleting Images
2
Enter the Q mode and use the four-way controller
(45) to choose the image you want to magnify.
Press the y button.
The image is magnified (×1.1 to ×10). Holding down the y button
continuously magnifies the image.
With Quick Zoom (p.235) set to O (On), pressing y once magnifies
the image to 10×.
You can use the + mark of the guide at
the bottom left of the screen to check
which portion of the image is
magnified.
The following operations can be
performed while an image is
magnified.
Guide
Four-way controller (2345) Moves the position to be magnified
Zoom button right (y)
Makes the image bigger (max. of 10×)
Zoom button left (f)
Makes the image smaller (min. of 1.1×)
3
Press the 4 button.
The image returns to single-image display.
Movies cannot be magnified.
162
Zoom In on the Subject’s Face Automatically
(Face Close-up Playback)
You can enjoy playing back images with the subject’s faces zoomed up
simply by pressing the I button (Face close-up playback) if the Face
Detection function operated when the images were taken.
f/y button
Q button
I button
Four-way controller
4 button
2
Enter the Q mode and use the four-way controller
(45) to choose the image you want to magnify.
Confirm that the I icon is displayed in the image and
press the I button.
The image is magnified around the
face first recognized when the image
was taken.
If multiple faces were recognized
when the image was taken, the
subject’s faces are zoomed up on
each time the I button is pressed in
order of the recognition during
shooting.
1/2
2/2
Playing Back and Deleting Images
1
4
163
The following operations can be performed during Face close-up
playback mode.
Zoom button right (y)
Zoom button left (f)
3
Zooms up on the subject being displayed for
Face close-up playback at an equal or slightly
larger magnification ratio.
Zooms up on the subject being displayed for
Face close-up playback at an equal or slightly
smaller magnification ratio.
Press the 4 button.
The image returns to single-image display.
4
Playing Back and Deleting Images
164
• Face close-up playback is not available for images that are saved as
still pictures from the movies.
• The magnification ratio for Face close-up playback may differ
depending on the conditions such as the size of the face recognized
when shooting.
• Face close-up playback is also available for pet’s faces recorded in
e (Pet) mode.
Deleting Images and Sound Files
Delete images and sound files that you do not want to keep.
Deleting a Single Image/Sound File
You can delete a single image or sound file.
Protected images and sound files cannot be deleted (p.169).
4
Four-way controller
4 button
i button
1
2
Enter the Q mode and use the four-way controller
(45) to choose the image/sound file you want to
delete.
Press the i button.
A confirmation screen appears.
3
Use the four-way controller
(2) to select [Delete].
100-0017
Playing Back and Deleting Images
Q button
Delete
Cancel
OK OK
4
Press the 4 button.
The image is deleted.
165
To Delete a Sound File
If sound (voice memo) has been recorded with an image (p.212), you
can delete the sound without deleting the image.
1
Enter the Q mode and use the four-way controller
(45) to choose the image with sound.
U appears on the images with sound.
2
Press the i button.
A confirmation screen appears.
3
4
Playing Back and Deleting Images
166
Use the four-way controller
(2) to select [Delete Sound].
100-0038
Delete Sound
Delete
Cancel
OK OK
4
Press the 4 button.
The sound file is deleted.
• Select [Delete] in step 3 to delete both the image and sound file.
• You cannot delete only the sound in a movie.
Deleting Selected Images and Sound Files
You can delete several images/sound files selected from the 6- or
12-image display at once.
Protected images and sound files cannot be deleted (p.169).
f/y button
Q button
1
Press the f button once or twice in Q mode.
6-image display or 12-image display appears.
2
Press the i button.
P appears on the images and sound
files.
3
Use the four-way controller
(2345) to choose the
images and sound files that
you want to delete and press
the 4 button.
MENU Cancel
Delete
OK
MENU Cancel
Delete
OK
4
Playing Back and Deleting Images
Four-way controller
4 button
i button
O appears on the selected images
and sound files.
Pressing and holding the y button displays the selected image in a
single screen and you can check whether to delete the image.
Releasing the button returns to 6- or 12-image display. However,
protected images cannot be displayed in single-image display.
167
4
Press the i button.
A confirmation screen appears.
5
Use the four-way controller
(2) to select [Select & Delete].
Delete all selected
images/sounds?
Select & Delete
Cancel
OK OK
MENU
6
Press the 4 button.
The selected images and sound files are deleted.
4
Playing Back and Deleting Images
Deleting All Images and Sound Files
Deletes all the images and sound files at once.
Protected images and sound files cannot be deleted (p.169).
Q button
Four-way controller
4 button
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
168
2
Use the four-way controller
(23) to select [Delete All].
Setting
3/4
Power Saving
Auto Power Off
Quick Zoom
Guide Display
Reset
Delete All
5 sec.
3 min.
MENU Exit
3
Press the four-way controller (5).
A confirmation dialog appears.
4
Use the four-way controller
(2) to select [Delete All].
Delete All
Delete all
images/sounds?
4
OK OK
5
Press the 4 button.
All the images and sound files are deleted.
Protecting Images and Sound Files from Deletion
(Protect)
You can protect stored images and sound files from being accidentally
deleted.
1
2
Enter Q mode and use the four-way controller (45) to
choose the image you want to protect.
Playing Back and Deleting Images
Delete All
Cancel
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select
Z (Protect).
2/2
Protect
Protects images and sounds
from accidental deletion.
Formatting will delete
MENU Cancel
OK OK
169
4
Press the 4 button.
The screen for selecting [Single Image/Sound] or [All Images/Sounds]
appears.
5
Use the four-way controller
(2) to select [Single Image/
Sound].
Single Image/Sound
All Images/Sounds
Cancel
OK OK
6
The message [Protects this image/sound] appears.
To protect another image or sound file, use the four-way controller
(45) to select another image or sound file.
4
Playing Back and Deleting Images
170
Press the 4 button.
7
Use the four-way controller
(2) to select [Protect].
100-0038
Protects this
image/sound
Protect
Unprotect
Cancel
OK OK
8
Press the 4 button.
The selected image or sound file is protected.
To protect other images or sound files, repeat Steps 5 to 8.
Select [Cancel] to exit the Protect settings.
• To cancel the Protect setting, select [Unprotect] in step 7.
• Y appears on the protected images and sound files during playback.
To Protect All Images and Sound Files
1
Select [All Images/Sounds] in
step 5 on p.170.
Single Image/Sound
All Images/Sounds
Cancel
OK OK
2
3
Press the 4 button.
Use the four-way controller
(2) to select [Protect].
Protects all
images/sounds
4
OK OK
4
Press the 4 button.
All the images and sound files are protected and the screen shown in
Step 1 reappears.
5
Use the four-way controller (23) to select [Cancel] and
press the 4 button.
The Playback Mode Palette reappears.
Protected images and sound files are deleted when the SD Memory
Card or the built-in memory is formatted (p.214).
Playing Back and Deleting Images
Protect
Unprotect
Cancel
To cancel the Protect setting on all your images and sound files, select
[Unprotect] in step 3.
171
Connecting the Camera to AV
Equipment
You can connect the camera to a TV or other device with a video IN jack
or HDMl terminal and playback images.
4
Playing Back and Deleting Images
• The power lamp on the camera lights up during a connection.
• If you intend to use the camera continuously for a long period, use of
the AC adapter kit K-AC117 (optional) is recommended. (p.38)
• For AV equipment with multiple video IN jacks, check the operating
manual of the AV device, and select the video IN jack to which the
camera is connected.
• You cannot output composite and HDMI video at the same time.
• The camera display turns off while the camera is connected to AV
equipment.
• You cannot adjust the volume on the camera when connected to an
AV device. Adjust the volume on the AV device.
• When the camera is connected to an AV device, you can change the
images with the remote control (optional).
Connecting the Camera to a Video IN Jack
By using the optional AV cable (I-AVC7), you can capture and play back
images on equipment with a video IN jack, such as a TV.
External Input
Terminal
AUDIO
VIDEO (L)
(R)
PC/AV terminal
172
Yellow
White
1
2
Turn the AV device and camera off.
Open the terminal cover.
Move the terminal cover lock lever in the direction shown by 1, slide
the cover in the direction shown by 2 and open the cover in the
direction shown by 3.
3
4
Connect the AV cable to the PC/AV terminal.
Connect the other ends of the AV cable (yellow: video,
white: audio) to the video input terminal and audio input
terminal of the AV device.
When using stereo sound equipment, insert the sound terminal into the
L (white) terminal.
Turn the AV device on.
When the device that the camera is connected to and the device that
plays back images are different, turn both devices on.
When viewing images on AV equipment with multiple video input
terminals (such as a TV), refer to the operation manual of the device
and select the video input terminal to which to connect the camera.
6
Turn the camera on.
• Depending on the country or region, images and sound files may fail
to be played back if the video output format is set different from the one
in use there. If this happens, change the video output format setting
(p.228).
• The camera’s AV output is output at normal resolution.
To watch movies shot at M or F at HDTV resolution, output the
movies as HDMI or transfer them to a computer (p.174).
Playing Back and Deleting Images
5
4
Close the terminal cover securely when not using the terminal.
<How to close the terminal cover>
Close the cover in the opposite direction indicated by 3. While lightly
pressing on the terminal cover, slide it away from 2 until it clicks.
173
Connecting the Camera to an HDMI Terminal
Use a commercially available HDMI cable to connect the camera to a
device with an HDMI terminal.
HDMI
terminal
4
Playing Back and Deleting Images
1
2
Turn the AV device and camera off.
Open the terminal cover.
Move the terminal cover lock lever in the direction shown by 1, slide
the cover in the direction shown by 2 and open the cover in the
direction shown by 3.
3
4
5
Connect the HDMI cable to the HDMI terminal.
Connect the other end of the HDMI cable to the HDMI IN
jack on the AV device.
Turn the AV device and camera on.
The camera information is displayed on the screen of the connected
AV device.
• The camera has a Type D (Micro) HDMI terminal. Use a commercially
available HDMI cable that matches your AV device.
• If you playback the movie by connecting the camera to an AV device
with a commercially available HDMI cable, set the output format to
“Selecting the HDMI Output Format” (p.229).
174
Close the terminal cover securely when not using the terminal.
<How to close the terminal cover>
Close the cover in the opposite direction indicated by 3. While lightly
pressing on the terminal cover, slide it away from 2 until it clicks.
4
Playing Back and Deleting Images
175
Editing Images
5Editing and Printing
Images
Changing the Image Size (Resize)
By changing the size and quality of a selected image, you can make the
file size smaller than the original. You can use this function to continue
taking pictures when the SD Memory Card or the built-in memory is full,
by making the images smaller and overwriting the original images to
make more space available.
• Images taken with the recorded pixels of j (3216×3216) or
panoramic images and movies cannot be resized.
• You cannot select a larger resolution and higher Quality Level than
that of the original image.
5
1
Editing and Printing Images
2
Enter the Q mode and use the four-way controller
(45) to choose the image you want to resize.
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select
n (Resize).
Resize
1/2
Changes Recorded Pixels
and Quality Level to make
the file size smaller
OK OK
MENU Cancel
4
Press the 4 button.
The screen for choosing the image size appears.
5
Select [Recorded Pixels] and
[Quality Level].
Use the four-way controller (45) to
choose the size and quality.
Use the four-way controller (23) to
switch between [Recorded Pixels] and
[Quality Level].
176
Recorded Pixels
Quality Level
MENU Cancel
14M
OK OK
6
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a
new image and the following confirmation does not appear.
7
Use the four-way controller
(23) to select [Overwrite] or
[Save as].
Overwrite
original image?
Overwrite
Save as
Cancel
OK OK
8
Press the 4 button.
The resized image is saved.
Cropping Images
Images taken with the recorded pixels of j (3216×3216) or
panoramic images and movies cannot be cropped.
1
2
Enter the Q mode and use the four-way controller
(45) to choose the image you want to crop.
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select
o (Cropping).
Cropping
5
Editing and Printing Images
You can delete the unwanted part of a picture and save the cropped
image as a separate image.
1/2
For cropping images to the
size you like. Saved as a
new image
MENU Cancel
OK OK
177
4
Press the 4 button.
The cropping screen appears.
The largest size of the cropped image is shown with a green frame on
the screen. The cropped image cannot be larger than this cropping
frame size.
5
Choose the cropping area.
The following operations move the
green frame and set the area for
cropping on the screen.
Zoom button Changes the size of the
(f/y)
cropped section
Four-way
Moves the cropping position
controller
up, down, left and right
(2345)
Green Button Rotates the cropping frame
• The button is only
displayed when the
cropping frame size can
be rotated.
5
Editing and Printing Images
6
OK
OK
Press the 4 button.
The cropped image is saved with a new file name.
The number of recorded pixels is selected automatically according to
the size of the cropped section. The image is saved at the same quality
level as the original.
Processing Images to Make Faces Look Smaller
Images are processed to reduce the size of people’s faces detected with
the Face Detection function (p.71) when taking pictures so that they look
smaller.
1
2
In Q mode, use the four-way controller (45) to
choose the image you want to edit.
Press the four-way controller (3).
The Playback Mode Palette appears.
178
MENU
Cancel
3
Use the four-way controller
(2345) to select k (Small
Face Filter).
1/2
Small Face Filter
Reduces the size of faces
in the image, for wellproportioned portraits
MENU Cancel
4
OK OK
Press the 4 button.
Face detection frames for faces that can be corrected are displayed.
Proceed to Step 6 when there is only one detection frame.
5
Use the four-way controller
(2345) to select a face to
be processed.
A green frame indicates the face that
is to be processed.
OK OK
Press the 4 button.
Use the four-way controller
(45) to change the reduction
ratio.
F
G
H
8
Approx. 5%
Approx. 7%
Approx. 10%
MENU Cancel
OK OK
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a
new image and the following confirmation dialog does not appear.
9
Use the four-way controller
(23) to select [Overwrite] or
[Save as].
Editing and Printing Images
6
7
5
Overwrite
original image?
Overwrite
Save as
Cancel
OK OK
179
10 Press the 4 button.
The camera returns to Q mode and the processed image is displayed.
You may not be able to process images in the following situations:
• When the size of face taken in relation to an image is too large or too
small
• When faces are located in the edges of an image
In such cases, the face detection frame in Step 4 will not appear.
Using the Digital Filters
This mode lets you change the color tones and perform special
processing on a selected image.
B&W/Sepia
5
Editing and Printing Images
Changes color images to black and white or processes usnig the
sepia filter.
Toy Camera
Images seem to have been taken with a toy camera.
Retro
Images have the feel of old photos with a white border. You can
choose from three filters: Original image, amber, and blue.
Color
Processes the image using the selected color filter. You can choose
from six filters: red, pink, purple, blue, green, and yellow.
Extract Color
Processes the image using the selected color extraction filter. You
can choose from three filters: red, green, and blue.
Color Emphasis There are 4 filters: Sky Blue/Fresh Green/Delicate Pink/Autumn
Leaves.
High Contrast
Adjusts the contrast of the captured images.
Starburst
Processes the image with a special sparkling look achieved by
adding cross-like effects to a highlighted area, such as town lights
at night, light reflected from water, or other light sources. You can
choose from three filters: Cross, Heart, and Star.
Soft
Processes the image into a soft image that appears soft overall.
Fish-eye
Applies a fish-eye lens effect to images.
Brightness
Adjusts the brightness of the image.
Miniature
Blurs part of the image to create a fake miniature scene.
Panoramic images, movies or images taken with another camera cannot
be edited using Digital Filter function. An error message appears if you
choose this function from the Playback Mode Palette and press the 4
button.
180
1
2
Enter the Q mode and use the four-way controller
(45) to choose the image you want to edit.
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select P (Digital
Filter).
1/2
Digital Filter
For modifying images with
a Color filter or Soft
filter
MENU Cancel
4
Press the 4 button.
OK OK
B&W/Sepia
The digital filter selection screen
appears.
MENU Cancel
12
OK OK
5
Editing and Printing Images
1 B&W/Sepia
2 Toy Camera
3 Retro
4 Color
5 Extract Color
6 Color Emphasis
7 High Contrast
8 Starburst
9 Soft
10 Fish-eye
11 Brightness
12 Miniature
1
2
3
4
5
6
7
8
9
10
11
Subsequent steps vary depending on your selection.
181
To Select a Soft Filter
5
Use the four-way controller (23) to choose a digital
filter you want to use.
The preview image of the results of the filter effect appears.
6
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a
new image and the following confirmation does not appear.
7
5
Editing and Printing Images
182
Use the four-way controller
(23) to select [Overwrite] or
[Save as].
Overwrite
original image?
Overwrite
Save as
Cancel
OK OK
8
Press the 4 button.
The images processed with the filter are saved.
To Select a B&W/Sepia, Retro, Color, Extract Color, Color
Emphasis or Starburst Filter
5
Use the four-way controller (23) to choose the digital
filter you want to use.
The preview image of the results of the filter effect appears.
6
Use the four-way controller
(45) to choose the effect.
Retro
OK OK
MENU Cancel
Retro
Four-way controller
(4)
Blue
Default Setting
Original image
Four-way controller
(5)
Amber
7
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a
new image and the following confirmation does not appear.
8
Use the four-way controller
(23) to select [Overwrite] or
[Save as].
5
Editing and Printing Images
B&W/Sepia
B&W ↔ Sepia
Color
Red ↔ Pink ↔ Purple ↔ Blue ↔ Green ↔ Yellow
Extract Color
Red ↔ Green ↔ Blue
Color Emphasis Sky Blue ↔ Fresh Green ↔ Delicate Pink ↔ Autumn Leaves
Starburst
Cross ↔ Heart ↔ Star
Overwrite
original image?
Overwrite
Save as
Cancel
OK OK
9
Press the 4 button.
The images processed with the filter are saved.
183
To Select Toy Camera, High Contrast, Fish-eye, Brightness or
Miniature Filter
5
Use the four-way controller (23) to choose a digital
filter you want to use.
The preview image of the results of the filter effect appears.
6
Use the four-way controller
(45) to adjust the effect.
Toy Camera
OK OK
MENU Cancel
Toy Camera
High Contrast
Fish-eye
Brightness
Miniature
5
Editing and Printing Images
7
Four-way controller
(4)
Weak
Weak
Weak
Dark
Upper
Default Setting
Standard
Standard
Standard
Standard
Upper and lower
Four-way controller
(5)
Strong
Strong
Strong
Bright
Lower
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a
new image and the following confirmation does not appear.
8
Use the four-way controller
(23) to select [Overwrite] or
[Save as].
Overwrite
original image?
Overwrite
Save as
Cancel
OK OK
9
Press the 4 button.
The images processed with the filter are saved.
184
Using the Ink Rubbing Filter
You can edit the image to look like an ink rubbing.
The Ink Rubbing Filter cannot be used on the following images.
• Movies or images taken at F (Digital Panorama) or
(Report)
modes
• Images that have recorded pixels of h, h, l, or m
• Images taken with other cameras
An error message appears in step 4.
1
2
Enter Q mode and use the four-way controller
(2345) to choose the image you want to edit.
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Ink Rubbing Filter
1/2
Creates an image similar
to ink rubbing from
original pictures
MENU Cancel
4
OK OK
Press the 4 button.
The preview image of the results of the filter effect appears.
5
Use the four-way controller
(45) to choose the effect.
You can adjust the effect in five levels.
F Weak
G Standard
H Strong
6
Ink Rubbing Filter
MENU Cancel
5
Editing and Printing Images
Use the four-way controller
(2345) to select
(Ink
Rubbing Filter).
OK OK
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a
new image and the following confirmation does not appear.
185
7
Use the four-way controller
(23) to select [Overwrite] or
[Save as].
Overwrite
original image?
Overwrite
Save as
Cancel
OK OK
8
Press the 4 button.
The images processed with the filter are saved.
• The processed images are saved with the recorded pixels of f/
.
• When there is little contrast between the object and the background,
the shape of the object may not be sharp depending on the conditions
of the original image.
5
Creating a Collage Image
Editing and Printing Images
Make a collage image by placing captured images on a selected pattern.
The collage function cannot be used on the following images.
• Movies or images taken at F (Digital Panorama) or
(Report)
modes
• Images that have recorded pixels of l, or m
• Image taken with other cameras
An error message appears in step 4.
1
Enter Q mode and press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller
(2345) to select
(Collage).
Collage
1/2
Creates a collage print
page from saved image
files
MENU Cancel
186
OK OK
3
Press the 4 button.
The item selection screen appears.
Recorded Pixels
Layout
Backgnd.
Select image(s)
3M
Create an image
MENU
Selecting the Number of Recorded Pixels
4
5
Use the four-way controller (23) to choose the
[Recorded Pixels].
Press the four-way controller (5).
A pull-down menu appears.
6
You can choose from h or h.
Recorded Pixels
Layout
Backgnd.
Select image(s)
Create an image
MENU Cancel
7
3M
OK OK
Press the 4 button.
Returns to the item selection screen.
Selecting the Layout Pattern
8
9
Use the four-way controller (23) to choose the
[Layout].
Press the four-way controller
(5).
A pull-down menu appears.
Recorded Pixels
Layout
Backgnd.
Select image(s)
5
Editing and Printing Images
Use the four-way controller
(23) to choose the recorded
pixels.
3M
Create an image
MENU Cancel
OK OK
187
10 Use the four-way controller (23) to choose the pattern
of layout.
You can choose from 3 patterns of layout (
11
/
/
).
Press the 4 button.
Returns to the item selection screen.
Selecting the Background
12
Use the four-way controller (23) to choose
[Backgnd.].
13 Press the four-way controller (5).
A pull-down menu appears.
14
5
Editing and Printing Images
188
Use the four-way controller
(23) to choose the
background.
You can choose the white background
or the black background.
Recorded Pixels
Layout
Backgnd.
Select image(s)
Create an image
MENU Cancel
15 Press the 4 button.
Returns to the item selection screen.
3M
OK OK
Laying Out the Image
• The collage function cannot be used on the following images.
- Movies or images taken at F (Digital Panorama) or
(Report)
modes
- Images that have recorded pixels of l, or m
- Images taken with other cameras
These images do not appear as selectable items.
• If you select an image with a 16:9 aspect ratio, the black areas appear
above and below the image.
16 Use the four-way controller (23) to choose [Select
image(s)].
17
Press the four-way controller (5).
The images to be selected appear.
18 Use the four-way controller
0/4
The selected image is placed in the
highlighted area in the guide. The
guide appears on the top left of the
monitor.
OK
MENU Cancel
19 Repeat step 18 to lay out the rest images.
20 Press the 9 button.
Returns to the item selection screen.
100 - 0001
Exit
5
Editing and Printing Images
(45) to choose the image to
include and press the 4
button.
189
Saving the Edited Image
21 Use the four-way controller
(23) to select [Create an
image].
Recorded Pixels
Layout
Backgnd.
Select image(s)
3M
Create an image
OK OK
MENU
22 Press the 4 button.
A confirmation dialog for saving the image appears.
23 Use the four-way controller
(2) to select [Save].
Save
Cancel
5
Editing and Printing Images
190
OK OK
24 Press the 4 button.
The edited image is saved.
The quality level of the image is fixed at C (Best).
Red-eye Compensation
You can correct images where the flash has caused the subject to
appear with red eyes.
• The red-eye compensation function cannot be used on panoramic
images, movies or on images where red eyes cannot be detected on
the camera. An error message appears in step 4.
• The red-eye compensation function can only be used with still pictures
taken with this camera.
1
2
Enter the Q mode and use the four-way controller
(45) to choose the image you want to correct.
Press the four-way controller (3).
The Playback Mode Palette appears.
3
1/2
Red-eye Compensation
For compensating red-eye.
May not work due to the
condition of the image
MENU Cancel
4
OK OK
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a
new image and the following confirmation does not appear.
5
Use the four-way controller
(23) to select [Overwrite] or
[Save as].
5
Editing and Printing Images
Use the four-way controller
(2345) to select Z (Redeye Compensation).
Overwrite
original image?
Overwrite
Save as
Cancel
OK OK
6
Press the 4 button.
The edited image is saved.
191
Adding a Frame (Frame Composite)
This function lets you add a decorative frame to still pictures. There are
6 frames already stored in the camera. You can copy the optional frames
from the CD-ROM supplied with the camera.
The frame composite function cannot be used on the following images.
• Movies or images taken at F (Digital Panorama) or
(Report)
modes
• Images that have recorded pixels of l, or m
An error message appears in step 4.
1
5
2
Enter the Q mode and use the four-way controller
(45) to choose the image to which you want to add a
frame.
Press the four-way controller (3).
The Playback Mode Palette appears.
Editing and Printing Images
3
Use the four-way controller
(2345) to select N (Frame
Composite).
1/2
Frame Composite
For composing an image
with a frame. Select Overwrite or Save as to save
MENU Cancel
4
OK OK
Press the 4 button.
The 12-frame display of the frame selection screen appears.
5
Use the four-way controller
(2345) to choose a frame.
OK OK
192
6
Press the y button.
The selected frame appears in singleimage display.
You can choose another frame using
either of the following operations.
OK OK
Four-way
Press to choose a
controller (45) different frame.
Zoom button
Press to return to the
left (f)
12-frame display of the
frame selection screen,
and then perform step 5 to
choose a different frame.
7
Press the 4 button.
The frame position and size
adjustment screen appears.
You can adjust the image using either
of the following operations.
8
Press to adjust the
position of the image
OK
Cancel
OK
Press to make the image
larger or smaller.
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a
new image and the following confirmation does not appear.
9
Use the four-way controller
(23) to select [Overwrite] or
[Save as].
Editing and Printing Images
Four-way
controller
(2345)
Zoom button
(f/y)
5
MENU
Overwrite
original image?
Overwrite
Save as
Cancel
OK OK
10 Press the 4 button.
The edited image is saved with the recorded pixels of
h (2048×1536)/h (1920×1080).
193
Optional Frames
The optional frames are stored in the CD-ROM supplied with the camera. To
use these frames, copy them from the CD-ROM. These optional frames are
deleted if the files on the built-in memory are deleted with a computer or if the
built-in memory is formatted.
To Copy Frames
1
2
3
5
Editing and Printing Images
4
5
6
7
8
Remove the SD Memory Card from the camera.
If you leave the SD Memory Card in the camera, the frames will be
copied onto the card, not into the camera’s built-in memory.
Connect the camera to the computer using the
provided USB cable (I-USB7).
Refer to “Connecting to a Computer” (p.241) for instructions on
connecting the camera to a computer.
When the device detection window opens, click
[Cancel].
Insert the CD-ROM into the CD-ROM drive.
When the installer window opens, click [EXIT].
If there is not already a “FRAME” folder in the root
directory of the camera (Removable Disk), create the
folder.
Copy the desired files from the FRAME folder in the
root directory of the CD-ROM to the FRAME folder on
the camera (Removable Disk).
For information on working with files on your computer, refer to the
instruction manual supplied with the computer.
Disconnect the USB cable from the computer and
camera.
Refer to “Connecting to a Computer” (p.241) for instructions on
disconnecting the camera from a computer.
• Frames can be stored both in the built-in memory and on the SD Memory
Cards, but using large numbers of frames may slow down processing times.
194
To Use a New Frame
The frames downloaded from the PENTAX website or other source can
be used for adding a frame to pictures.
• Extract the downloaded frame and copy it to the FRAME folder in the
built-in memory or the SD Memory Card.
• The FRAME folder is created when the SD Memory Card is formatted
with this camera.
• For more information on downloading, refer to the PENTAX website.
Overlaying Your Original Frame on an Image
You can overlay your original frame (decorative frame) on an image. You
can select the type and color of an original frame and its position.Text
can also be entered.
5
Type of original
Blur/Edge Composite
frame
F (All sides)/G (Upper and lower sides)/H (Right and left sides)/
Frame Type
I (Upper side)/J (Lower side)/K (Left side)/L (Right side)
Color
White/Gray/Black/Pink/Pumpkin/Dark red/Dark green
Text Stamp
Available
characters
Display Position
Color
A – Z, a – z, 0 – 9, Symbols
M (Upper-left)/N (Upper-center)/O (Upper-right)/P (Lower-left)/
Q (Lower-center)/R (Lower-right)
White/Gray/Black/Pink/Pumpkin/Dark red/Dark green
Editing and Printing Images
Frame
The Original Frame function cannot be used on images taken at
F (Digital Panorama) or
(Report) modes, images recorded with
h/h/l/m in [Recorded Pixels], or movies. An error message
appears in Step 4.
195
1
2
In Q mode, use the four-way controller (45) to
choose the image you want to add a frame to.
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select
E (Original Frame).
1/2
Original Frame
Av a i l a b l e t o m a k e f r o m t h e
kind and color of a frame.
Av a i l a b l e t o e n t e r t e x t
MENU Cancel
4
OK OK
Press the 4 button.
The original frame type selecting screen appears.
5
5
Editing and Printing Images
Use the four-way controller
(23) to select an original
frame type, and press the 4
button.
Blur
Edge Composite
Cancel
The frame setting screen appears.
OK OK
6
Use the four-way controller
(23) to select [Frame Type],
and press the four-way
controller (5).
Frame Type
Color
Text Stamp
Position Adjustment
MENU Cancel
7
8
9
OK Save
Use the four-way controller (23) to select a frame type,
and press the four-way controller (4).
Set [Color] in the same way as in Steps 6 and 7.
Adjust the position of the frame and image.
For details, refer to “To Adjust the Position of the Frame and an Image”
(p.197).
196
10 Use the four-way controller (23) to select [Text Stamp],
and press the four-way controller (5).
The Text Stamp screen appears.
When you do not enter characters, proceed to Step 12.
11
Set up the text stamp.
For details, refer to “To Set Up Text
Stamp” (p.198).
Text Stamp
A B C D E F G H I J K L MN O P Q R S TUVWX Y Z
0 1 2 3 4 5 6 7 8 9 . , ( ) [ ] < >@ / : ; ! ?
Finish
# + = $% { }
Delete One Character
OK Enter
MENU Cancel
12
A/a
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a
new image and the following confirmation dialog does not appear.
13 Use the four-way controller
5
Overwrite
original image?
Overwrite
Save as
Cancel
OK OK
14
Press the 4 button.
The edited image is saved with the recorded pixels of
f (2592×1944)/
(2592×1464).
To Adjust the Position of the Frame and an Image
1
Editing and Printing Images
(23) to select [Overwrite] or
[Save as].
Press the Green button.
The frame position adjustment screen
appears.
Four-way controller
(2345)
Zoom button right
(y)
Zoom button left
(f)
Press to adjust the
position of the frame
Press to make the
frame larger
Press to make the
frame smaller
MENU
Cancel
/
OK
OK
197
2
Press the Green button.
The image position adjustment screen
appears.
Four-way controller
(2345)
Zoom button right
(y)
Zoom button left
(f)
3
Press to adjust the
position of the image
Press to make the
image larger
Press to make the
image smaller
MENU
Cancel
/
OK
OK
Press the 4 button.
The screen returns to the original screen.
To Set Up Text Stamp
5
1
Editing and Printing Images
The selected character is input.
Up to 52 characters can be input.
I button
Zoom button right
(y)
Zoom button left
(f)
Green button
2
198
Use the four-way controller
(2345) to select a
character and press the 4
button.
Text Stamp
A B C D E F G H I J K L MN O P Q R S TUVWX Y Z
0 1 2 3 4 5 6 7 8 9 . , ( ) [ ] < >@ / : ; ! ?
Finish
# + = $% { }
FR I ENDS
Delete One Character
MENU Cancel
A/a
OK OK
Press to switch
between upper and
lower case
Press to move the
cursor to the right
Press to move the
cursor to the left
Press to delete the
character
Use the four-way controller (2345) to select [Finish]
and press the 4 button.
3
Use the four-way controller
(23) to select [Display
Position] and press the fourway controller (5).
Enter on this condition
F R I END S
Display Position
Color
Preview
MENU Cancel
4
5
6
Use the four-way controller (23) to select the display
position and press the four-way controller (4).
Use the four-way controller (23) to select [Color] and
press the four-way controller (5).
Use the four-way controller (23) to select the color
and press the four-way controller (4).
5
To View the Preview Screen
Press the Green button.
F R I ENDS
The preview screen appears.
MENU
2
Press the 3 button.
The screen returns to the original screen.
3
Press the 4 button.
Editing and Printing Images
1
OK OK
Proceed to Step 12 on p.197.
199
Editing Movies
You can select a frame from the recorded movie to save as a still picture,
divide a movie into two, or add a title picture to a movie.
1
2
Enter the Q mode and use the four-way controller
(45) to choose the movie you want to edit.
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select [ (Movie
Editing).
Movie Editing
1/2
Clipping still image from
movie, movie segmentation,
and to add title picture
5
MENU Cancel
Editing and Printing Images
4
OK OK
Press the 4 button.
The Movie Editing selection screen
appears.
Save as Still Image
Divide Movies
Adding title picture
Cancel
OK OK
To Save a Frame from a Movie as a Still Picture
5
6
Select [Save as Still Image] on the Movie Editing
selection screen.
Press the 4 button.
The screen appears for selecting a frame to be saved as a still picture.
200
7
Use the four-way controller
(2345) to choose the frame
you want to save.
2
3
4
5
8
100-0042
00:06
Select the image
to save
Plays or pauses the movie
Stops the movie and returns to
MENU Cancel
the first frame
Reverses the movie frame by frame
Advances the movie frame by frame
1
OK OK
Press the 4 button.
The selected frame is saved as a still picture.
To Divide a Movie
Select [Divide Movies] on the movie edit selection screen.
5
Press the 4 button.
The screen for choosing the dividing position appears.
7
Use the four-way controller
(2345) to determine the
dividing position.
2
3
4
5
8
100-0042
00:09
Select image for
dividing position
Plays or pauses the movie
Stops the movie and returns to
MENU Cancel
the first frame
Reverses the movie frame by frame
Advances the movie frame by frame
1
OK
OK
Press the 4 button.
Editing and Printing Images
5
6
A confirmation dialog appears.
9
Use the four-way controller
(2) to select [Divide].
Divide at this position?
Divide
Cancel
OK OK
201
10 Press the 4 button.
The movie is divided at the specified position, the two portions are
saved as new files, and the original one is deleted.
The protected movies cannot be divided.
To Add a Title Picture to a Movie
5
6
Select [Adding title picture] on the movie edit selection
screen.
Press the 4 button.
The screen appears for selecting a title picture.
7
5
Use the four-way controller (45) to choose the desired
title picture.
Editing and Printing Images
Only images available for use with the title picture are displayed.
8
Press the 4 button.
The screen appears for confirming the position of the title picture.
9
Use the four-way controller
(23) to select the position.
A
B
Adds the title picture to the
beginning of the movie
Adds the title picture to the
end of the movie
Specify the position of
title picture to add
10 Press the 4 button.
The selected picture is saved as the title picture.
Protected movies cannot be added a title picture.
202
Cancel
OK
OK
• When a title picture is added to the beginning of a movie: When the
movie is played back, the still picture is played back for three seconds,
and then the movie is played back. The still picture registered as title
picture is used as the thumbnail of the movie.
When a title picture is added to the end of a movie: When the movie is
played back, the movie is played back, and then the still picture is
played back for three seconds. The thumbnail of the movie is not
changed by adding a title picture to the end of the movie.
• Only a still image with the same aspect ratio as the movie can be set
as the title picture.
Copying Images and Sound Files
You can copy images and sound files from the built-in memory to the SD
Memory Card and vice versa. This function can only be selected when
an SD Memory Card has been inserted in the camera.
1
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller
(2345) to select p (Image/
Sound Copy).
2/2
Image/Sound Copy
For copying images and
sounds between the builtin
memory and SD memory card
MENU Cancel
3
OK OK
5
Editing and Printing Images
Make sure that the camera is turned off before inserting or removing the
SD Memory Card.
Press the 4 button.
The copying method selection screen appears.
203
To Copy Files from the Built-in Memory to the SD Memory Card
All the images and sound files in the built-in memory are copied to the
SD Memory Card at once. Before copying the images, make sure that
there is enough space on the SD Memory Card.
4
Use the four-way controller
(2) to select [2}{].
SD
SD
Cancel
OK OK
5
Press the 4 button.
All the images and sound files are copied to the SD Memory Card.
5
To Copy Files from the SD Memory Card to the Built-in Memory
Editing and Printing Images
Selected images and sound files from the SD Memory Card are copied
to the built-in memory one at a time.
4
5
6
Use the four-way controller (23) to select [{}2].
Press the 4 button.
Use the four-way controller
(45) to select the image/
sound file you want to copy.
100 - 0017
Copies this image/sound
MENU Cancel
7
OK OK
Press the 4 button.
The selected image/sound file is copied to the built-in memory.
To copy other images or sound files, repeat Steps 4 to 7. Select
[Cancel] to exit the settings.
• If sound (Voice Memo) has been recorded with the image, the sound
file is copied with the image.
• When a file is copied from the SD Memory Card to the built-in memory,
it is assigned a new file name.
204
Setting the Printing Service (DPOF)
DPOF (Digital Print Order Format) is the format for storing print order
data on still pictures captured with a digital camera. Once the print order
data has been stored, the pictures can be printed according to the DPOF
settings using a DPOF-compatible printer or photo processing lab.
DPOF cannot be set for movies or sound-only files.
If the picture already has the date and/or time imprinted on it (p.136), do
not set [Date] O (On) in DPOF settings. If you select O (On), the
imprinted date and/or time may overlap.
Printing a Single Image
Set the following items for each image.
5
1
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller
(2345) to select r (DPOF).
2/2
DPOF
For the print settings.
Useful when printing at a
printing service
MENU Cancel
3
OK OK
Editing and Printing Images
Copies For setting the number of prints. You can print up to 99 copies.
Date Specify whether you want the date inserted on the print or not.
Press the 4 button.
The screen for selecting [Single Image] or [All Images] appears.
205
4
Use the four-way controller
(23) to select [Single Image].
Single Image
All Images
Cancel
OK OK
5
Press the 4 button.
The message [Applies DPOF settings to this image] appears.
To make DPOF settings for another image, use the four-way controller
(45) to select another image.
If DPOF settings have already been made for an image, the previous
number of copies and date setting (O (On) or P (Off)) will be displayed.
6
5
Use the four-way controller
(23) to choose the number of
copies.
100-0017
Applies DPOF settings
to this image
Editing and Printing Images
Copies
Date
00
Date
OK OK
MENU Cancel
7
Use the Green button to
choose whether to insert the
date or not.
100-0017
Applies DPOF settings
to this image
Copies
01
Date
O(On) The date will be imprinted.
P (Off) The date will not be
Date
OK OK
MENU Cancel
imprinted.
To continue setting DPOF print order data, use the four-way controller
(45) to choose another image and repeat steps 6 and 7.
8
Press the 4 button.
The setting is saved and the screen shown in Step 4 reappears.
Depending on the printer or printing equipment at the photo processing
lab, the date may not be imprinted on the pictures even if On is selected
in the DPOF settings.
To cancel DPOF settings, set the number of copies to [00] in step 6 and
press the 4 button.
206
Printing All Images
When you choose the number of copies and whether or not to insert the
date, the settings are applied to all the images stored in the camera.
1
2
Select [All Images] in step 4 on p.206.
Press the 4 button.
The message [Applies DPOF settings to all images] appears.
3
Choose the number of copies
and whether to insert the date
or not.
Refer to steps 6 and 7 in “Printing a
Single Image” (p.206) for details of
how to make the settings.
4
Applies DPOF settings
to all images
Copies
Date
01
Date
MENU Cancel
OK OK
Press the 4 button.
• The number of copies specified in the DPOF settings applies to all the
images. Before printing, check that the number is correct.
• Settings for single images are canceled when settings are made with
[All Images].
5
Editing and Printing Images
The settings for all the images are saved and the camera returns to the
DPOF setting screen.
207
Recording Sound (Voice Recording
Mode)
6Recording and
Playing Back Sound
You can record sound with the camera. The microphone is located on
front of the camera. When recording sound, aim the microphone at the
sound source to obtain the best sound quality.
Microphone/
Speaker
Setting Voice Recording
To use the Voice Recording function, register Voice Recording to the
Green Button.
When the shooting mode is set to 9 (Green) Mode, [Green Button]
settings cannot be configured on the [A Rec. Mode] menu. To configure
the settings, first switch to a mode other than 9.
6
Recording and Playing Back Sound
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
3
Press the four-way controller (23) to select [Green Button].
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller
(23) to select [Voice
Recording] and press the 4
button.
Green Button
Green Mode
Voice Recording
Movie
Fn Setting
MENU Cancel
5
OK OK
Press the 3 button.
The Voice Recording function is registered to the Green Button.
208
Recording Sounds
Shutter release
button
Green Button
1
Press the Green button in A
mode.
The camera enters Voice Recording
mode. The remaining recordable time
and the recording time of the current
file appear on the display.
1 Recording time
2 Remaining recordable time
3
00:00:00
SHUTTER Start
6
Press the shutter release
button fully.
Recording starts. The self-timer lamp
and REC icon (red) flash during
recording.
When the Green button is pressed
during recording, an index is added to
the current sound file.
2
01:31:44
01:30:32
REC
00:01:22
Index
SHUTTER Stop
Press the shutter release button fully.
Recording stops.
• If you press and hold down the shutter release button for more than
one second in step 2, recording continues until you take your finger off
the button. This is useful for recording short sounds.
• Sound is saved in WAVE monaural files.
• In O (Voice Recording) mode, pressing the 4/W button only
turns off the LCD and changes the display to Normal Display.
Recording and Playing Back Sound
2
1
209
Playing Back Sound
You can play back the sound files you made with Voice Recording.
f/y button
Q button
Four-way controller
1
2
3
6
Recording and Playing Back Sound
210
Press the Q button.
Use the four-way controller (45) to choose a sound
file to play back.
Press the four-way controller
(2).
Playback starts.
1 Total file recording time
2 Playback time
1
2
100
0025
10 - 002
00:00:00
00:01:30
02/02/'13 14:25
The following operations can be performed during playback.
Four-way controller (2)
Pauses playback
Zoom button (y)
Increases the volume
Zoom button (f)
Reduces the volume
If there are no recorded indexes:
Four-way controller (4)
Reverses playback
Four-way controller (5)
Fast forwards playback
If there are recorded indexes:
Plays back starting from the previous index
Four-way controller (4)
Four-way controller (5)
Plays back starting from the next index
The following operations can be performed while playback is paused.
Four-way controller (2)
Resumes playback
Four-way controller (4)
Rewinds approx. 5 seconds
Four-way controller (5)
Advances approx. 5 seconds
4
Press the four-way controller (3).
Playback stops.
6
Recording and Playing Back Sound
211
Adding a Voice Memo to Images
You can add a voice memo to your still pictures.
Recording a Voice Memo
1
2
Enter Q mode and use the four-way controller (45) to
choose the still picture to which you want to add a voice
memo.
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select \ (Voice
Memo).
2/2
Voice Memo
Attaches sound to images.
Recording is possible till
the memory card is full
MENU Cancel
6
Recording and Playing Back Sound
212
4
Press the 4 button.
Recording starts.
5
OK OK
100 - 0038
01:31:44
Press the 4 button.
Recording stops.
• A voice memo cannot be added to the image that already has a voice
memo. Delete the old voice memo (p.166) and record a new one.
• A voice memo cannot be added to protected images (p.169).
Playing Back a Voice Memo
f/y button
Q button
Four-way controller
1
Enter Q mode and use the four-way controller (45) to
choose the still picture with the voice memo that you
want to play back.
U appears on images with voice memos in single-image display.
2
Press the four-way controller
(2).
100 - 0038
Playback starts.
6
The following operations can be performed during playback.
Zoom button (y)
Increases the volume
Zoom button (f)
Reduces the volume
3
Press the four-way controller (3).
Playback stops.
To Delete a Sound File 1p.166
Recording and Playing Back Sound
Edit
213
Camera Settings
7Settings
Formatting the Memory
Formatting deletes all the data on the SD Memory Card or the built-in
memory.
Be sure to use this camera to format (initialize) an SD Memory Card that
is unused or has been used on other cameras or digital devices.
• Do not remove an SD Memory Card while it is being formatted. This
may damage the card and make it unusable.
• Formatting deletes protected images and any data recorded on the
card with a computer or any camera.
• SD Memory Cards formatted on a computer or device other than this
camera cannot be used. Be sure to format the card with the camera.
• To format the built-in memory, be sure to eject the SD Memory Card
beforehand. Otherwise, the SD Memory Card will be formatted.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
7
Settings
2
3
Use the four-way controller (23) to select [Format].
Press the four-way controller (5).
The [Format] screen appears.
4
Use the four-way controller
(2) to select [Format].
Format
All data will be deleted
Format
Cancel
OK OK
5
Press the 4 button.
Formatting starts.
When formatting is completed, the camera returns to A mode or Q
mode.
214
Changing the Sound Settings
You can adjust the volume of operation sounds and change the type of sound.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [Sound].
Press the four-way controller
(5).
Sound
Operation Volume
Playback Volume
Start-up Sound
Shutter Sound
Operation Sound
Self-timer Sound
The [Sound] screen appears.
Off
1
1
1
MENU
To Change the Operation Volume/Playback Volume
4
5
Use the four-way controller (23) to select [Operation Volume].
Use the four-way controller (45) to adjust the volume.
6
Change [Playback Volume] in the same way as in steps
4 and 5.
7
Settings
Set the volume to f to mute the start-up sound, shutter sound,
operation sound, and self-timer sound.
To Change the Sound Type
4
5
Use the four-way controller (23) to select [Start-up Sound].
Press the four-way controller (5).
A pull-down menu appears.
6
Use the four-way controller (23) to select the sound type.
Choose from [1], [2], [3], [4], [Off], or [USER].
215
7
8
9
Press the 4 button.
Set [Shutter Sound], [Operation Sound] and [Self-timer
Sound] in the same way as in steps 4 to 7.
Press the 3 button.
The screen returns to the [W Setting] menu.
Changing the Sound (Using a Recorded Sound File)
You can use a sound recorded by the camera for sound settings.
The first two seconds of the selected sound file will be played as the
[USER] sound.
1
2
Select [USER] in step 6 in “To Change the Sound Type”.
Press the 4 button.
100 - 0038
The playback screen for the recorded
sound files appears.
MENU Cancel
7
3
OK OK
Use the four-way controller (45) to select a sound file.
Settings
Play back the selected file to confirm.
Four-way controller (2): Plays back the first two seconds of the sound file.
Four-way controller (3): Stops playback.
4
Press the 4 button.
The selected sound is set as the [USER] sound.
5
6
Set [Shutter sound], [Operation Sound] and [Self-timer
Sound] in the same manner.
Press the 3 button.
The screen returns to the [W Setting] menu.
The Sound settings are saved when the camera is turned off.
216
Changing the Date and Time
You can change the initial date and time settings (p.49). You can also
set the style in which the date appears on the camera.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [Date
Adjustment].
Press the four-way controller
(5).
Date Adjustment
The [Date Adjustment] screen
appears.
Date Format
mm/dd/yy 24h
Date
01/01/2013
Time
00:00
Settings complete
MENU Cancel
4
Press the four-way controller (5).
The frame moves to [mm/dd/yy].
Depending on the initial setting or previous setting, [dd/mm/yy] or [yy/
mm/dd] may be displayed.
Use the four-way controller
(23) to choose the date and
time display style.
Date Adjustment
Choose from [mm/dd/yy], [dd/mm/yy]
or [yy/mm/dd].
Date Format
mm/dd/yy 24h
Date
01/01/2013
Time
00:00
7
Settings
5
Settings complete
MENU Cancel
6
Press the four-way controller (5).
The frame moves to [24h].
217
7
Use the four-way controller
(23) to select [24h] (24-hour
display) or [12h] (12-hour
display).
Date Adjustment
Date Format
mm/dd/yy 24h
Date
01/01/2013
Time
00:00
Settings complete
MENU Cancel
8
Press the four-way controller (5).
The frame returns to [Date Format].
9
Press the four-way controller
(3).
Date Adjustment
Date Format
mm/dd/yy 24h
The frame moves to [Date].
Date
01/01/2013
Time
00:00
Settings complete
MENU Cancel
10 Press the four-way controller (5).
The frame moves to one of the following items depending on the date
style set in step 5.
Month for [mm/dd/yy]
Day for [dd/mm/yy]
Year for [yy/mm/dd]
The following operations and screens use [mm/dd/yy] as an example.
The operations are the same even if another date style has been
selected.
7
Settings
11
Use the four-way controller
(23) to change the month.
Date Adjustment
Date Format
mm/dd/yy 24h
Date
01/01/2013
Time
00:00
Settings complete
MENU Cancel
12
Press the four-way controller (5).
The frame moves to the day field. Use the four-way controller (23) to
change the day. After changing the day, change the year in the same
manner.
218
13 Change the time in the same way as in steps 8 to 12.
If you selected [12h] in step 7, the setting switches between am and
pm corresponding to the time.
14
Press the four-way controller
(3) to select [Settings
complete].
Date Adjustment
Date Format
mm/dd/yy 24h
Date
01/01/2013
Time
00:00
Settings complete
MENU Cancel
OK OK
15 Press the 4 button.
The date and time settings are saved and the screen returns to the
[W Setting] menu.
When you press the 4 button in step 15, the camera clock is reset to
00 seconds. To set the exact time, press the 4 button when the time
signal (on the TV, radio, etc.) reaches 00 seconds.
Setting the Alarm
You can set the alarm to ring at a specified time.
You can choose whether the alarm will ring at the same time every day
or only once at the set time.
1
Press the 3 button in Q mode.
Settings
Setting the Alarm
7
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Alarm].
219
3
Press the four-way controller
(5).
Alarm
Off
The Alarm screen appears.
Time
00:00
Alarm
14:14
Settings complete
MENU Cancel
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller (23) to select the alarm.
Choose from [Off], [Once], or [Everyday].
6
7
Press the 4 button.
Press the four-way controller (3).
The frame moves to the [Time] field.
8
Press the four-way controller (5).
The frame moves to the hour field.
9
Use the four-way controller (23) to change the hour,
then press (5).
7
The frame moves to the minute field.
Change the minutes in the same manner.
Settings
10 Press the 4 button.
11 Press the four-way controller (3).
The frame moves to [Settings complete].
12
Press the 4 button.
When the alarm is set to [Off], the
settings are saved and the screen
returns to the [W Setting] menu.
Check that [Alarm] is set to P (Off).
When the alarm is set to [Once] or
[Everyday], [Alarm is set] is displayed
and the power turns off.
220
Setting
Sound
Date Adjustment
Alarm
World Time
Text Size
MENU Exit
1/4
01/01/2013
Standard
English
Checking the Alarm
1
Use the four-way controller (23) to select [Alarm] on
the [W Setting] menu.
Check that [Alarm] is set to O (On).
2
Press the four-way controller
(5).
The Alarm screen appears.
Check the alarm frequency and time.
Alarm
14:14
Alarm
Once
Time
14:25
Settings complete
MENU Cancel
3
Press the 3 button twice.
The camera returns to A mode or Q mode.
Turning the Alarm Off
WED
• The alarm will not ring if the camera is on when the set time is reached.
• Even if an alarm is set, the alarm will not ring while interval shooting is
being performed.
7
Settings
The Clock mode screen appears and the
alarm rings for one minute when the set
time is reached while the camera is turned
off.
You can stop the alarm by pressing any
button on the camera while the alarm is
ringing.
Setting the World Time
The date and time selected in “Setting the Date and Time” (p.49) and
“Changing the Date and Time” (p.217) serve as the W ( Hometown) date
and time. By using the world time function, you can display the time in a
city other than the Hometown (X Destination). This is useful when
taking pictures in a different time zone.
221
To Set the Destination
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [World
Time].
Press the four-way controller
(5).
World Time
Select Time
The [World Time] screen appears.
Destination
New York
DST
OFF
OF
Hometown
New York
DST
OFF
OF
MENU
4
5
Use the four-way controller (23) to select
X (Destination).
Press the four-way controller (5).
The [Destination] screen appears. The city that is currently selected
blinks on the map.
7
Settings
6
Use the four-way controller
(45) to change the
Destination city.
The current time, location and time
difference of the selected city appear.
14:25
Destination
City
DST
New York
TimeDif.
+ 0:00
MENU Cancel
7
8
Use the four-way controller (23) to select [DST].
Use the four-way controller (45) to select O (On) or
P (Off).
Select O (On) if the Destination city uses daylight saving time.
9
Press the 4 button.
The [World Time] setting is saved.
222
OK OK
10 Press the 3 button twice.
The camera returns to A mode or Q mode.
Select W (Hometown) in step 4 to set the city and DST setting for the
Hometown city.
To Display the Time of the Destination (Select Time)
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [World
Time].
Press the four-way controller (5).
The [World Time] screen appears.
4
Use the four-way controller
(23) to select [Select Time].
World Time
Select Time
Destination
London
DST
OFF
OF
Hometown
New York
DST
OFF
OF
Settings
MENU
5
Press the four-way controller (5).
A pull-down menu appears.
6
Use the four-way controller
(23) to select
X (Destination) or
W (Hometown).
X Displays the time of the
Destination city
W Displays the time of the
Hometown city
7
World Time
Select Time
Destination
London
DST
OFF
OF
Hometown
New York
DST
OFF
OF
MENU Cancel
OK OK
223
7
Press the 4 button.
The setting is saved.
8
Press the 3 button twice.
The camera returns to A mode or Q
mode.
When X (Destination) is selected in
step 6, the X icon appears on the
display to indicate that the destination
date and time are displayed in A
mode.
P
38
Setting the Text Size on the Menu
You can set the text size of the item selected with the cursor on the menu
to [Standard] (normal display) or [Large] (magnified display).
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
7
Settings
2
3
Use the four-way controller (23) to select [Text Size].
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller
(23) to select the text size.
Select from [Standard] or [Large].
Setting
Sound
Date Adjustment
Alarm
World Time
Text Size
MENU Exit
5
Press the 4 button.
The setting is saved.
224
1/4
01/01/2013
Standard
Large
OK OK
Changing the Display Language
You can change the language in which the menus, error messages, etc.
are displayed.
The camera supports the following languages: English, French,
German, Spanish, Portuguese, Italian, Dutch, Japanese, Danish,
Swedish, Finnish, Polish, Czech, Hungarian, Turkish, Greek, Russian,
Thai, Korean, and Chinese (traditional and simplified).
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [Language/
Press the four-way controller (5).
The [Language/
4
] screen appears.
Use the four-way controller
(2345) to select the
language.
MENU Cancel
OK OK
Press the 4 button.
The menus and messages are displayed in the selected language.
7
Settings
5
].
225
Changing the System for Naming Folders
You can change the system for naming the folders for storing images.
When the naming system is set to the date, pictures are saved in
separate folders by the date they were taken.
Choice
Date
(Default)
PENTX
_USER
7
The name of the folder
xxx_mmdd (3-digit folder number_month day)
* xxx_ddmm (3-digit folder number_day month) when the date format is
set to [dd/mm/yy]
A folder is made by day, and the images and sound files of the day are
saved in the folder.
xxxPENTX (xxx is the 3-digit folder number)
Up to 9999 images are saved in the same folder.
xxxAAAAA (xxx is the automatically given 3-digit folder number, and
AAAAA is the 5-digit letters that you entered)
Up to 9999 images are saved in the same folder.
Image taken on April 1
with the folder name
setting set to [Date]
created.
A folder with the name
“100_0401” is created.
The images are saved in
the “100_0401” folder.
Image taken on April 8
with the folder name
setting set to [Date]
created.
A folder with the name
“100_0408” is created.
The images are saved in
the “100_0408” folder.
Image taken on April 10
with the folder name
setting set to [PENTX]
created.
A folder with the name
“102PENTX” is created.
The images are saved in
the “102PENTX” folder.
Image taken on April 15
with the folder name
setting set to [PENTX]
created.
A new folder is not
created.
The images are saved in
the “102PENTX” folder.
DCIM
DCIM
DCIM
DCIM
Settings
100
100
100
100
100_0401
100_0401
100_0401
100_0401
101
101
101
101_0408
101_0408
101_0408
102
102PENTX
102
102PENTX
• Up to 900 folders can be created.
• Up to 9999 images or sounds can be saved in a
folder.
226
Selecting a Rule for Naming Folders
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [Folder
Name].
Press the four-way controller
(5).
A pull-down menu appears.
Setting
Folder Name
USB Connection
Video Out
HDMI Out
Eye-Fi
Brightness Level
2/4
Date
PENTX
_ USER
Auto
MENU Cancel
4
5
OK OK
Use the four-way controller (23) to select the rule for
naming folders.
Press the 4 button.
The setting is saved.
7
Naming the Folder Yourself
Settings
You can name the folder in which to save images.
You can enter up to five numbers and letters.
The 5-digit name is displayed after the 3-digit folder number.
1
2
Select [_USER] in step 4 in “Selecting the Rule for
Naming Folders”.
Press the four-way controller
(5).
The folder naming screen appears.
“_USER” has already been entered.
Folder Name
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9
Settings complete
U S E R
MENU Cancel
OK Enter
227
3
Use the four-way controller (2345) to select the
letter to enter, and press the 4 button.
The first letter is fixed and the cursor moves to the second letter.
4
5
Repeat step 3 and enter the remaining letters.
Press the four-way controller
(4) while “A” is selected, or
press (35) while “_” is
selected.
The frame moves to [Settings
complete].
6
Folder Name
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9
Settings complete
P A R T Y
MENU Cancel
OK OK
Press the 4 button twice.
The folder name is fixed, and returns to the [W Setting] menu.
• You can move the cursor by pressing the zoom button.
• The name of the folder that was set is displayed in the [R Setting]
menu.
Changing the Video Output Format
7
Settings
When you connect the camera to AV equipment, choose the appropriate
video output format (NTSC or PAL) for taking and playing back images.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [Video Out].
Press the four-way controller (5).
A pull-down menu appears.
228
4
Use the four-way controller
(23) to select a video output
format.
Choose the video output format to
match the output format of the AV
equipment.
5
Setting
Folder Name
USB Connection
Video Out
HDMI Out
Eye-Fi
Brightness Level
2/4
Date
MSC
NTSC
PAL
MENU Cancel
OK OK
Press the 4 button.
The setting is saved.
Depending on the country or region, images and sound files may fail to
be played back if the video output format is set differently from the one
in use there. If this happens, change the video output format setting.
Connecting the Camera to AV Equipment 1p.172
Video Output Format by City 1p.278
Selecting the HDMI Output Format
When you connect the camera to AV equipment with an HDMI cable, set
the appropriate video output resolution for playing back images. The
default setting is [Auto].
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
7
Settings
1
Use the four-way controller (23) to select [HDMI Out].
Press the four-way controller
(5).
A pull-down menu appears.
Setting
Folder Name
USB Connection
Video Out
HDMI Out
Eye-Fi
Brightness Level
MENU Cancel
2/4
Date
MSC
Auto
1080i
720p
480p
OK OK
229
4
Use the four-way controller (23) to select an output
format.
Choose the HDMI output format to match the output format of the AV
equipment.
5
Press the 4 button.
The setting is saved.
The items on the pull-down menu vary depending on the selected Video
output format.
To change the display, set the Video output format before setting the
HDMI output format.
The table below shows the combinations of the Video output format and
HDMI output.
Video output format
NTSC
PAL
Auto (The largest size that both the TV and
camera support is automatically selected)
1080i (1920×1080i)
Resolution
720p (1280×720p)
480p (1920×1080i)
576p (720×576p)
7
Settings
230
Setting the Eye-Fi Communication
You can automatically transfer images or movies to a computer or similar
devices via wireless LAN using a commercially available Eye-Fi card.
For details on transferring images, refer to “Transferring Images Using
an Eye-Fi Card” (p.264). The default setting is P (Off).
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [Eye-Fi].
Use the four-way controller
(45) to select O or P.
O
P
4
Turns on communication
using an Eye-Fi card
Turns off communication
using an Eye-Fi card
Setting
Folder Name
USB Connection
Video Out
HDMI Out
Eye-Fi
Brightness Level
2/4
Date
MSC
NTSC
Auto
MENU Exit
Press the 4 button.
The setting is saved.
7
Settings
To establish an Eye-Fi communication, you first have to specify a
wireless LAN access point and transfer destination on the Eye-Fi card.
For details on how to set up the card, refer to the operating manual
supplied with the Eye-Fi card.
231
Adjusting the Brightness of the Display
You can adjust the brightness of the display to 7 levels.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [Brightness
Level].
Use the four-way controller
(45) to adjust the
brightness.
F
G
H
4
Dark
Normal
Bright
Setting
Folder Name
USB Connection
Video Out
HDMI Out
Eye-Fi
Brightness Level
MENU Exit
Press the 3 button.
The camera returns to A mode or Q mode.
The display appears with the set brightness.
7
Settings
232
2/4
Date
MSC
NTSC
Auto
Using the Power Saving Function
You can save battery power by setting the display to dim automatically
when no operation is performed for a fixed time. After the power saving
function has been activated, the display returns to the ordinary
brightness if any button is pressed.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [Power
Saving].
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller
(23) to select the time until
the camera enters power
saving mode.
Choose from [2min.], [1min.], [30sec.],
[15sec.], [5sec.] or [Off].
MENU Cancel
3/4
2 min.
1 min.
30 sec.
15 sec.
5 sec.
Off
OK OK
Press the 4 button.
The setting is saved.
7
Settings
5
Setting
Power Saving
Auto Power Off
Quick Zoom
Guide Display
Reset
Delete All
• Power Saving does not function in the following situations:
- While taking pictures in the continuous shooting mode
- In the playback mode
- During movie recording
- While the camera is connected to a computer
- When using the AC adapter
- While a menu is being displayed
- In the
(Digital Microscope) mode
• When no operation is performed after the camera is turned on, Power
Saving is activated only after 15 seconds elapse even if [5sec.] is set.
233
Setting Auto Power Off
You can set the camera to turn off automatically when no operation is
performed for a fixed time.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [Auto Power
Off].
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller
(23) to select the time until
the camera turns off
automatically.
Choose from [5min.], [3min.] or [Off].
Setting
Power Saving
Auto Power Off
Quick Zoom
Guide Display
Reset
Delete All
3/4
5 sec.
5 min.
3 min.
Off
MENU Cancel
7
Settings
234
5
Press the 4 button.
The setting is saved.
Auto Power Off does not function in the following situations:
• While taking pictures in the continuous shooting mode
• While recording a movie
• During a slideshow or movie/sound playback
• While the camera is connected to a computer
• While recording sound in Voice Recording mode
• While images are being transferred in Eye-Fi communication.
OK OK
Setting the Quick Zoom Function
While playing back images in Q mode, you can set whether to use
Quick Zoom to enlarge the playback image to 10× when pressing the y
button once.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [Quick
Zoom].
Use the four-way controller
(45) to switch between O
(On) or P (Off).
O (On) The Quick Zoom is
available.
P (Off) The Quick Zoom is not
available.
4
Setting
Power Saving
Auto Power Off
Quick Zoom
Guide Display
Reset
Delete All
3/4
5 sec.
3 min.
MENU Exit
Press the 3 button.
The camera returns to A mode or Q mode.
7
Settings
235
Setting the Guide Display
Set whether to display the guide for the Capture Mode Palette or
Playback Mode Palette.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [Guide
Display].
Use the four-way controller
(45) to switch between O
(On) or P (Off).
O (On) The mode guides are
displayed.
P (Off) The mode guides are not
displayed.
4
Setting
Power Saving
Auto Power Off
Quick Zoom
Guide Display
Reset
Delete All
MENU Exit
Press the 3 button.
The camera returns to A mode or Q mode.
7
Settings
236
3/4
5 sec.
3 min.
Perform Pixel Mapping
Pixel mapping is a function for mapping out and correcting for defective
pixels in the CCD sensor. Run the Pixel Mapping function if image dots
always seem to be defective in the same place.
• Pixel Mapping is only available in A mode. Pixel mapping cannot be
selected even if the [W Setting] menu is displayed by pressing the
3 button in Q mode.
• When executing Pixel Mapping from Q mode, press the Q button
once to enter A mode. Then press the 3 button and the fourway controller (5) to display the [W Setting] menu and select Pixel
Mapping.
• Pixel Mapping cannot be selected in Voice Recording mode.
1
Press the 3 button in A mode, and then press the
four-way controller (5) once.
The [W Setting] menu appears.
2
3
Use the four-way controller (23) to select [Pixel
Mapping].
Press the four-way controller (5).
The [Pixel Mapping] screen appears.
Use the four-way controller
(2) to select [Pixel Mapping].
7
Settings
4
Pixel Mapping
Checks the image sensor
and corrects defective
pixels
Pixel Mapping
Cancel
OK OK
5
Press the 4 button.
Defective pixels are mapped and corrected.
When the battery level is low, [Not enough battery power remaining to
activate Pixel Mapping] is displayed on the monitor. Use the AC adapter
kit K-AC117 (optional) or use a battery with ample capacity remaining.
237
Changing the Start-up Screen
You can choose the start-up screen displayed when the camera is turned on.
You can choose any of the following images as the start-up screen:
• The Guide Display Start-up Screen showing a guide to the shooting
modes and buttons
• The pre-installed screen
• One of your own images (compatible images only)
1
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller
(2345) to select ^ (Startup Screen).
Start-up Screen
2/2
For setting a captured
image as the Start-up
Screen
MENU Cancel
3
OK OK
Press the 4 button.
The image selection screen appears.
7
4
Settings
Use the four-way controller
(45) to choose the image for
the start-up screen.
Only images suitable for the start-up
screen are displayed. You can also
choose the pre-installed screen or the
Guide Display Start-up Screen already
stored in the camera.
5
Press the 4 button.
The setting is saved.
238
100 - 0017
MENU Cancel
OK OK
• Once the start-up screen has been set, it is not being deleted even if
the original image is deleted or the SD Memory Card or built-in memory
is formatted. However the image is deleted if you change the start-up
screen after deleting the recorded image or formatting the memory.
• Select [Off] to hide the start-up screen.
• The start-up screen is not displayed when you turn the camera on in
the playback mode.
• Movies or images taken at F (Digital Panorama) mode cannot be
used for the start-up screen.
Resetting to Default Settings (Reset)
You can reset the camera settings to their defaults. Refer to “Default
Settings” (p.273) for the reset settings.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
3
Use the four-way controller (23) to select [Reset].
Press the four-way controller (5).
The [Reset] screen appears.
Use the four-way controller
(2) to select [Reset].
7
Settings
4
Reset
Returns to default
settings
Reset
Cancel
OK OK
5
Press the 4 button.
The settings return to the defaults.
The following settings are not affected by resetting:
• Date Adjustment
• World Time
• Language/
• Video Out
• The folder name that you created
239
Displaying the Clock Mode
You can use the camera as a clock. With the camera turned off, press
and hold down the 4 button to display the clock on the display.
4 button
1
Press and hold down the 4
button.
The camera turns on and the clock
appears on the screen.
The camera turns off automatically
after approximately 10 seconds.
Pressing the power switch turns the
camera off immediately.
7
Settings
240
WED
8Connecting to a
Computer
Connecting to a Computer
By installing the software included on the provided CD-ROM on your
computer and connecting the camera to your computer with the USB
cable, you can transfer images and movies captured with your camera
to the computer and then display and manage them. This section
explains how to install the provided software and the other necessary
preparations for enjoying the captured pictures and movies on your
computer.
Provided Software
The following software is included in the provided CD-ROM.
Windows
• Image viewing/managing/editing software “MediaImpression
3.6.1 LE”
(Applicable languages: English, French, German, Spanish,
Portuguese, Italian, Dutch, Swedish, Russian, Chinese [traditional and
simplified], Korean, and Japanese)
It is recommended to use the optional AC adapter kit K-AC117 when the
camera is connected to a computer (p.38). If the battery runs out of
power while images are being transmitted to a computer, the data may
be lost or damaged.
8
Connecting to a Computer
Macintosh
• Image viewing/managing/editing software “MediaImpression 2.2
LE”
(Applicable languages: English, French, German, Spanish,
Portuguese, Italian, Dutch, Swedish, Russian, Chinese [traditional and
simplified], Korean, and Japanese)
241
System Requirements
The following system requirements must be met for you to fully enjoy the
images and movies captured with the camera on your computer.
Windows
OS
Windows® XP(SP3), Windows Vista®, Windows® 7, Windows® 8
• The OS must be preinstalled and updated to the latest
version.
CPU
Intel® Pentium® IV 1.6 GHz, AMD AthlonTM XP 1800+, or
equivalent
Memory
Hard Disk Space
Graphics
Monitor
Others
8
Connecting to a Computer
242
(Intel® CoreTM 2 Duo E6300, AMD AthlonTM 64 X2 5000+, or
higher recommended)
512 MB minimum (2 GB or higher recommended)
300 MB minimum (1 GB or higher recommended)
Intel® GMA X3100/NVIDIA GeForce® MX440/ATI RadeonTM
9200, with 128MB video memory, or equivalent
(Intel® GMA 4500HD/NVIDIA GeForce® 8600GT/ATI
RadeonTM HD 3800, with 256 MB video memory, or higher
recommended)
1024 × 768 pixels, 16-bit color or higher
CD-ROM drive
USB port as standard equipment
* Operation is not guaranteed on all computers meeting the system requirements.
* The system requirements describe the minimum environment for playing movies.
Windows 95, Windows 98, Windows 98SE, Windows Me and Windows
NT/Windows 2000 are not supported.
Macintosh
OS
Mac OS X (Ver.10.4, 10.5, 10.6, 10.7, 10.8)
• The OS must be preinstalled and updated to the latest
version.
CPU
PowerPC G4 800 MHz processor or equivalent (Intel© CoreTM
2 Duo, or higher recommended)
512 MB minimum (1 GB or higher recommended)
300 MB minimum (1 GB or higher recommended)
Memory
Hard Disk Space
Graphics
Monitor
Others
NVIDIA GeForce© FX 5200 Ultra with 64MB video memory, or
equivalent
(Intel© GMA 950/NVIDIA GeForce© 7300GT/ATI RadeonTM
X1600, with 128 MB video memory, or higher recommended)
1024 × 768 pixels, 16-bit color or higher
CD-ROM drive
USB port as standard equipment
* Operation is not guaranteed on all computers meeting the system requirements.
* The system requirements describe the minimum environment for playing movies.
8
Connecting to a Computer
243
Installing the Software
Windows
Install the image viewing/managing/editing software (MediaImpression
3.6.1 LE).
• Make sure your Windows PC meets the system requirements before
installing the software.
• When multiple accounts have been set up, log on with an account that
has administrative rights before installing the software.
1
2
Turn your Windows PC on.
Insert the CD-ROM into the CD-ROM drive.
[Auto play] screen appears.
Click [PENTAX Software Installer], and then click [Yes].
If the installer screen does not appear
Display the installer screen following the steps below.
1) Double-click [My Computer] on the desktop.
2) Double-click the CD-ROM drive icon.
If you are using Windows XP
The “MediaImpression 3.6.1 LE” installer screen appears.
3
The “Choose Setup Language” screen
appears.
8
Connecting to a Computer
244
Click [ArcSoft].
4
Choose a language, and click
[OK].
The setup screen appears.
Follow the on-screen guidance to
install the software.
5
Click [Finish].
“MediaImpression 3.6.1 LE”
installation is complete.
6
Click [Exit] on the installation screen.
The window closes.
Macintosh
Install the image viewing/managing/editing software (MediaImpression
2.2 LE).
1
2
3
4
Turn your Macintosh on.
Insert the CD-ROM into the CD-ROM drive.
Double-click the CD-ROM icon.
Double-click the [Pentax Software Installer] icon.
The “MediaImpression 2.2 LE” installer screen appears.
5
Click [ArcSoft].
8
Connecting to a Computer
The setup screen appears.
Follow the on-screen guidance to
install the software.
245
6
Click [Close].
“MediaImpression 2.2 LE” installation
is complete.
7
Click [Exit] on the installation screen.
The window closes.
Product Registration on the Internet
In order to better serve you, we request that you complete the product
registration.
8
Connecting to a Computer
246
If your computer is connected to the
Internet, please click [Product
Registration] on the setup screen after the
language selection screen is displayed.
The world map screen shown on the right
for Internet Product Registration is
displayed. Click the displayed country or
region and then follow the instructions to
register your product.
Only customers in countries and regions displayed on the software
installation screen can register their products on the Internet Product
Registration.
Setting the USB Connection Mode
Set the device to which the camera is connected with the USB cable.
Make sure to set the USB connection mode before connecting your
camera to the computer. You cannot perform the following setting if the
camera is already connected to your computer with the USB cable.
1
2
Turn your camera on.
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
3
4
Use the four-way controller (23) to select [USB
Connection].
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller
(23) to select [MSC].
Setting
Folder Name
USB Connection
Video Out
HDMI Out
Eye-Fi
Brightness Level
MENU Cancel
Press the 4 button.
The setting is saved.
7
Press the 3 button.
The camera returns to A mode or Q mode.
Proceed to the following pages depending on your computer.
Connecting to a Windows PC 1 p.249
Connecting to a Macintosh 1 p.258
MSC
PTP
Auto
OK OK
8
Connecting to a Computer
6
2/4
Date
247
MSC and PTP
MSC (Mass Storage Class)
A general-purpose driver program that handles devices connected to the
computer via USB as a memory device. Also indicates a standard for
controlling USB devices with this driver.
By simply connecting a device that supports USB Mass Storage Class,
you can copy, read, and write files from a computer without installing a
dedicated driver.
PTP (Picture Transfer Protocol)
A protocol that allows transfer of digital images and control of digital
cameras via USB, standardized as ISO 15740.
You can transfer image data between devices that support PTP without
installing a device driver.
Unless otherwise specified, select MSC when connecting the camera to
your computer.
8
Connecting to a Computer
248
Connecting to a Windows PC
Connecting the Camera and Your Windows PC
Connect your camera to the Windows PC using the provided USB cable
(I-USB7).
1
2
3
Turn your Windows PC on.
Turn your camera off.
Connect your camera to the Windows PC using the USB
cable.
Connect the terminal of the USB cable with arrow mark
front side of the camera.
facing the
8
Turn your camera on.
The “AutoPlay” screen appears.
If the “AutoPlay” screen does not appear, follow the steps in “When the
“AutoPlay” Screen Does Not Appear” (p.251).
We recommend using the optional AC adapter kit K-AC117 when the
camera is connected to the computer (p.38). If the battery runs out of
power while images are being transmitted to the computer, the image
data may be lost or damaged.
The power lamp is lit while the camera is connected to a PC, whereas it
blinks while the card is being accessed.
Connecting to a Computer
4
249
Transferring Images
Transfer the images captured with the camera to your Windows PC.
If there is no SD Memory Card in the camera, the images stored in the
built-in memory will be transferred to your Windows PC.
5
Click [Import media files to
local disk].
The “MediaImpression 3.6.1 LE” starts.
6
8
Connecting to a Computer
250
7
Set up [Destination Folder].
Select the image/s you want to
copy, then click [Import
Selected].
The selected images are copied to the
PC.
* To select two or more images, select
them while pressing the Ctrl key.
8
Click [Done].
When the “AutoPlay” Screen Does Not Appear
5
Double-click the
[MediaImpression 3.6.1 LE]
icon on the desktop.
6
Click [PhotoImpression].
7
Click [Import].
8
Specify [Get Media From].
Connecting to a Computer
8
251
If the SD Memory Card has a volume label, the volume label name
appears instead of [Removable Disk]. A new unformatted SD Memory
Card may show the manufacturer’s name or model number.
9
Set up [Destination Folder].
10 Select the image/s you want to
copy, then click [Import
Selected].
The selected images are copied to the
PC.
* To select two or more images, select
them while pressing the Ctrl key.
11
Click [Done].
8
Connecting to a Computer
252
Images are stored in folders named by the shooting date (“XXX_0808”
for August 8. “XXX” is a three-digit number.).
If [PENTX] is selected for [Folder Name] in the [W Setting] menu, a folder
named “XXXPENTX” (XXX is a three-digit folder number) is displayed. If
[_USER] is selected for [Folder Name], “xxxAAAAA” (xxx is a three-digit
folder number, AAAAA is the 5-digit letters that you entered) is
displayed. The images are stored there.
Disconnecting the Camera from Your Windows PC
1
2
Click the
[Safely Remove
Hardware] icon in the task bar.
Click [Eject xxx (name of the
camera)].
A message appears indicating that the
hardware can be safely removed.
3
Disconnect the USB cable
from your Windows PC and
the camera.
• If the camera (removable disk) is being used by an application such as
“MediaImpression 3.6.1 LE”, the camera cannot be disconnected until
the application is closed.
• The camera will automatically switch to the playback mode when the
USB cable is disconnected from your Windows PC or the camera.
8
Connecting to a Computer
253
Starting “MediaImpression 3.6.1 LE”
“MediaImpression 3.6.1 LE” lets you view, edit, manage, search for,
share, and print images.
1
Double-click the [MediaImpression 3.6.1 LE] icon on the
desktop.
“MediaImpression 3.6.1 LE” starts and the main window appears.
Media Window Interface
A
B
* The screen shown is an example with the default settings.
8
Connecting to a Computer
254
A PhotoImpression
You can view or manage still images. For example, you can import, edit
and print images.
B VideoImpression
You can view or manage movies. For example, you can import and edit
movies.
PhotoImpression
A
B
C
* The screen shown is an example with the default settings.
A Views
Displays the configuration of folders or groups sorted by your favorites
or a detected person.
B Preview Area
Displays the contents of the selected folder or sorted group.
C Actions
This panel provides editing/managing functions, such as an importing,
editing, movie making.
8
Connecting to a Computer
255
Viewing Images
1
2
Click [PhotoImpression] or
[VideoImpression] from the
main window.
Select and click the folder or
the group containing the image
you want to view.
Images are displayed.
3
8
Connecting to a Computer
256
Select and double-click the
image you want to view.
The selected image is displayed with
the viewer.
With the viewer, you can enlarge/
reduce the display size of the image or
edit it and so on. You can also play back
movies or sound files.
Double-click the image to view it at full screen.
Details on How to Use “MediaImpression 3.6.1
LE”
You can find more information on how to use “MediaImpression 3.6.1
LE” by using the help pages.
1
Click [Help] from [Menu] on the menu bar.
The help screen appears.
2
Click the desired topic.
An explanation is displayed.
8
Connecting to a Computer
257
Connecting to a Macintosh
Connecting the Camera and Your Macintosh
Connect your camera to the Macintosh using the provided USB cable
(I-USB7).
1
2
3
Turn your Macintosh on.
Turn your camera off.
Connect your camera to the Macintosh using the USB
cable.
Connect the terminal of the USB cable with arrow mark
front side of the camera.
facing the
8
Connecting to a Computer
258
4
Turn your camera on.
The camera is recognized as [NO_NAME] on the
desktop.
We recommend using the optional AC adapter kit K-AC117 when the
camera is connected to the computer (p.38). If the battery runs out of
power while images are being transmitted to the computer, the image
data may be lost or damaged.
• If the SD Memory Card has a volume label, the volume label name
appears instead of [NO_NAME]. A new unformatted SD Memory Card
may show the manufacturer’s name or model number.
• The power lamp is lit while the camera is connected to a Macintosh,
whereas it blinks while the card is being accessed.
Transferring Images
Transfer the images captured with the camera to your Macintosh.
If there is no SD Memory Card in the camera, the images stored in the
built-in memory will be transferred to your Macintosh.
5
6
Double-click the [MediaImpression] folder inside the
[Applications] folder.
Double-click the [MediaImpression 2.2 LE] icon.
“MediaImpression 2.2 LE” starts and the main browser window
appears.
7
Set up [Destination Folder]
and select [Subfolder Name].
8
Select the image/s you want to
copy, then click [Import].
The selected image/s are copied to the
PC.
Connecting to a Computer
8
259
9
Click [Done].
Disconnecting the Camera from Your Macintosh
1
Drag [NO_NAME] on the desktop to the trash.
If the SD Memory Card has a volume label, drag the icon of that name
to the trash.
2
Disconnect the USB cable from your Macintosh and the
camera.
• If the camera (removable disk) is being used by an application such as
“MediaImpression 2.2 LE”, the camera cannot be disconnected until
the application is closed.
• The camera will automatically switch to the playback mode when the
USB cable is disconnected from your Macintosh or the camera.
8
Connecting to a Computer
260
Starting “MediaImpression 2.2 LE”
“MediaImpression 2.2 LE” lets you view, edit, manage, search for, share,
and print images.
1
2
Double-click the [MediaImpression] folder inside the
[Applications] folder.
Double-click the [MediaImpression 2.2 LE] icon.
“MediaImpression 2.2 LE” starts and the main browser window
appears.
Media Window Interface
A
B
8
A Media browser tool
You can view images, movies, or play back audio files.
B Edit/Managing tool
You can edit or manage images. For example, you can import, edit or
print images.
Connecting to a Computer
* The screen shown is an example with the default settings.
261
Media Browser Interface
B
A
C
* The screen shown is an example with the default settings.
A Views
Displays the configuration of folders in your computer. When you browse
a folder, the contents of the folder appear in the media thumbnail pane.
B Preview Area
Displays the contents of the selected folder or the results of the most
recent search (the file or folder that matches the search item).
8
Connecting to a Computer
262
C Actions
This panel provides editing/managing functions, such as an importing,
editing, movie making.
Viewing Images
1
2
Click [Pictures], [Videos], or [All Media] from the main
window.
Select and click the folder containing the image you
want to view in the folder pane.
Images are displayed in the media thumbnail pane.
3
Select and double-click the image you want to view in
the media thumbnail pane.
The selected image is displayed with the
viewer.
With the viewer, you can enlarge/reduce
the display size of the image or edit it
and so on. You can also play back
movies or sound files.
Details on How to Use “MediaImpression 2.2 LE”
You can find more information on how to use “MediaImpression 2.2 LE”
by using the help pages.
1
Select [ArcSoft MediaImpression Help] from [Help] on
the menu bar.
2
Click the desired topic.
An explanation is displayed.
8
Connecting to a Computer
The help screen appears.
263
Transferring Images Using an Eye-Fi
Card
You can automatically transfer images or movies to a computer or similar
devices via wireless LAN using a memory card that is equipped with the
wireless LAN (Eye-Fi card) function.
1
Specify the wireless LAN access point and transfer
destination on the Eye-Fi card.
For details on how to set up the card, refer to the operating manual
supplied with the Eye-Fi card.
2
3
4
5
Turn the camera off.
Insert an Eye-Fi card that has been set up.
Turn the camera on.
Set [Eye-Fi] in the [W Setting] menu to O (On).
The images are transferred automatically. For details on how to set up
the camera, refer to “Setting the Eye-Fi Communication” (p.231).
The following icons appear on the display.
8
Connecting to a Computer
264
During Eye-Fi communication. The camera is
communicating or searching for the access point when
[Eye-Fi] is set to O (on).
Eye-Fi communication waiting. The camera is not
communicating when [Eye-Fi] is set to O (on).
Eye-Fi communication prohibited. When [Eye-Fi] is set to
P (off).
Eye-Fi version error. The version of the Eye-Fi card is out
of date or the card is write-protected.
• Not available for Endless Memory mode.
• Run the latest firmware on your Eye-Fi card.
8
Connecting to a Computer
• Copy the install file of Eye-Fi Manager stored on the card to your
computer before you format the card.
• Do not use an Eye-Fi card, or set [Eye-Fi] to P (Off) in a location where
wireless LAN devices are restricted or prohibited, such as on planes
(since images are transferred via wireless LAN).
• If you insert an older version Eye-Fi card in the camera, an error
message appears.
• Images are not transferred in the following cases:
- When available wireless LAN access points are not found.
- When the battery level is low (
(yellow) or
(red) is indicated).
• Voice recording sound files cannot be transferred.
• We recommend that you use an AC adapter (optional) when you
transfer a large number of images because this often requires long
transferring times.
• While images are being transferred, the Auto Power Off does not
function.
• If you transfer large-sized files, such as a movie, the temperature
inside the camera increases and the camera may be automatically
turned off to protect the circuit.
• To transfer images via wireless LAN, use of an access point, an
Internet environment, and configuration are required. For details, refer
to the Internet website (http://www.eye.fi).
• For details on how to use an Eye-Fi card, refer to the operating manual
supplied with the Eye-Fi card.
• If you have a problem with the Eye-Fi card, contact the manufacturer
of the card.
• The camera is equipped with a function that sets Eye-Fi
communication on or off, however, this does not guarantee availability
of all the functions on the Eye-Fi card.
• Use of the Eye-Fi card is permitted only in the country where you
purchased the card. Follow the laws of that country.
265
Functions Available for Each Shooting
Mode
√: Can be set. ×: Cannot be set. ⎯: Settings and changes are not applied.
9
Appendix
266
Shooting Mode
abB cR
b A A C
\UK B
Function
√*2 √*3 √*3 √*4 √*3 √*4
√*3
√*3 √*5
Zoom button Zoom operation
√
√
√
√
√
√
√
√
×
Face Detection On
√
√
√
√
√
√
√
√
×
Smile Capture
I button Self-portrait Assist / Self-portrait
√*33 √*33 √*33 × √*33 ×
√*33
√*33 ×
Assist + Smile Capture
×
√
√
√
√
√
√
×
×*8
Face Detection Off
√
√
×
×
√
×
√
√
×
, Auto
√
√
√
√
√
√
√
√
√
a Flash Off
√
√
√
×
√
×
√
√
×
Flash Mode b Flash On
√
√
×
×
√
×
√
√
×
c Auto + Red-eye
√
√
√
×
√
×
√
√
×
d Flash On + Red-eye
√
√
√
√
√
√
√
√
√
9 Standard
√
√
√
√
√
√
√
√
√
gZ Self-timer
Continuous Shooting/
×
√
×
×
√
×
√
√
×
jc
Burst Shooting
Drive Mode
√
√
√
√
√
√
√
√
√
hi Remote Control
×
√
√
√
√
√
√
√
√
k Interval Shoot
×
√
√
×
√
×
√
√
×
l Auto Bracketing
√
√
√
√
√
√
√
√
×
= Standard
√
√
√
√
√
√
√
√
×
q Macro
√
√
√
√
√
√
√
√
√
1cm Macro
Focus Mode
√
√
√
√
√
√
√
√
×
3 Pan Focus
√
√
√
√
√
√
√
√
×
s Infinity
√
√
√
√
√
√
√
√
×
z Manual Focus
×*9 √
√
√ ×*9 ×*9
×*9
×*9
√
Image Tone
√*11 √*11 √*11 √*12 √*11 √*12
√*11
√*11 ×*13
Recorded Pixels
√
√
√ ×*20 √ ×*20
√
√
√
Quality Level
×*22 √
√
√ ×*22 ×*22
×*22
×*22 √
White Balance
×*23 √
√ √*24 √ √*24
√
√
√
Focusing Area
AF
√
√
√
√
√
√
√
√
×
Auto Macro
Setting
√
√
√
×
√
×
√
√
√
Focus Assist
×*26 √
√ ×*26 ×*26 ×*26
×*26
×*26 √
AE Metering
√
√
√ ×*27 √ ×*27
√
√
√
Sensitivity
[A Rec.
√
√
√ ×*29 √ ×*29
√
√
√
AUTO ISO Range
Mode] menu
×*31 √
√
√
√
√
√
√
√
EV Compensation
×*8 √
√
√
√
√
√
√
√
D-Range Setting
√
√
√ ×*8 √
×*8
√
√ ×*25
Pixel Track SR*1
√
√
√ ×*8 √
×*8
√
√
×*8
Blink Detection
Sharpness/Saturation (Tone
×*32 √
√
√ ×*32 ×*32
×*32
×*32 √
Adjustment)/Contrast
√
√
√ ×*8 √
×*8
√
√
√
Date Imprint
√
√
√ ×*8 √
×*8
√
√
√
IQ Enhancer
√
√
√
√
√
√
√
√ ×*25
Macro Light
9Appendix
X c Q e S FN
×
√
√
×
√
√
√
√
√
√
√
√
×
√
×
×
√
√
×
√
√
√
√
√
√
×
√
√*3 √*3
√
×
√
√
√
√
√
√*3
√
√
√*3
√
√
√*6
√
√
Shooting Mode
√*7 Zoom operation
√ Face Detection On
√ Smile Capture
Function
Zoom button
I button
Self-portrait Assist / Self-portrait
Assist + Smile Capture
√
√
×
√
√
√
√
√ Face Detection Off
√
√
√
×
√
√
√
√
, Auto
√
√
√
√
√
√
√
√
a Flash Off
√
√
√
×
√
√
√
×
Flash Mode
b Flash On
√
√
√
×
√
√
√
×
c Auto + Red-eye
√
√
√
×
√
√
√
×
d Flash On + Red-eye
√
√
√
√
√
√
√
√
9 Standard
√
√
√
√
√
√
√
√
gZ Self-timer
Continuous Shooting/
√
√
√
×
×
×
√
× jc
Burst Shooting
Drive Mode
√
√
√
√
√
√
√
× hi Remote Control
√
√
√
×
×
√
√
×
k Interval Shoot
√
√
√
×
×
×
√
×
l Auto Bracketing
√
√
√
×
√
√
√
√
= Standard
√
√
√
×
√
√
√
√
q Macro
√
√
√
×
√
√
√
×
1cm Macro
Focus Mode
√
√
√
×
√
√
√
×
3 Pan Focus
√
√
√
√
√
√
√
√
s Infinity
√
√
√
×
√
√
√
×
z Manual Focus
√
×*9 ×*9 ×*9 √
√
√ ×*10 Image Tone
×*15 √*11 √*11 √ √*16 ×*17 ×*18 ×*19 Recorded Pixels
√
√
√
√
√
√
√ ×*21 Quality Level
√ ×*22 ×*22 ×*22 √
√ ×*22 ×*22 White Balance
√
√
√ ×*23 √ √*24 √ ×*23 Focusing Area
√
√
√
×
√
√
√ ×*25 Auto Macro
AF Setting
√
√
√
×
√
√
√ ×*25 Focus Assist
√ ×*26 ×*26 ×*26 √
√ ×*26 ×*26 AE Metering
×*27 √
√ ×*28 √
√
√ ×*27 Sensitivity
[A Rec.
×*30 √
√
×
√
√ ×*30 ⎯ AUTO ISO Range
Mode] menu
√
√
√
√
√
√
√ ×*31 EV Compensation
√
√
√
√
√
√
√
×*8 D-Range Setting
√
√
√ ×*8 ×*8 √*8
√
×*8 Pixel Track SR*1
√
√
√
√
√
√
√ ×*25 Blink Detection
Sharpness/Saturation (Tone
√ ×*32 ×*32 ×*32 √
√ ×*32 ×*32
Adjustment)/Contrast
√
√
√
√
√
√
√
×*8 Date Imprint
×
√
√
√
×
√
× ×*9 IQ Enhancer
√
√
√
√
√
√
√
×*8 Macro Light
√*33 √*33
×
√*33
×
√*33
×
√*33
9
Appendix
×*14
√
√
√
√
√
√
√
√
√
√
×*8
×*8
√*6
√
√
9
267
*1
Movie SR is used for movies, while
Pixel Track SR is used for still pictures.
*2 Flowers cannot be detected when
using Digital Zoom or Intelligent Zoom.
*3 Optical zoom is always possible,
digital zoom and intelligent zoom
cannot be used if the Sensitivity
selection is ISO 3200/6400.
*4 Before shooting only optical zoom and
digital zoom are possible, during
shooting only digital zoom is possible.
*5 Only optical zoom and intelligent zoom
are possible, digital zoom cannot be
used.
*6 Only optical zoom is possible, digital
zoom and intelligent zoom cannot be
used.
*7 Only optical zoom and digital zoom are
possible, intelligent zoom cannot be
used.
*8 Fixed to P (Off)
*9 Fixed at Natural
*10 Fixed at Bright
*11 Fixed to f/
when the
Sensitivity selection is ISO 3200/6400.
*12 Set in [Movie] on the [A Rec. mode]
menu
9
Appendix
268
*13 Fixed to h
*14 Fixed to h for individual pictures,
and fixed to f for composite images.
*15 Fixed to f/
*16 Fixed to i for individual pictures,
and fixed to f for composite 3
images.
*17 Fixed to h/h
*18 Fixed to V
*19 Fixed to g
*20 Fixed to C (Best) equivalent
*21 Fixed to D (Better)
*22 Fixed to F
*23 Fixed to J (Multi)
*24 W (Automatic Tracking AF) is not
available
*25 Fixed to O (On)
*26 Fixed to L (Multi-segment metering)
*27 Fixed to AUTO
*28 The sensitivity is fixed at its minimum
setting
*29 Fixed at 80-800
*30 Fixed at 80-6400
*31 Fixed at ±0.0
*32 Fixed as standard
*33 Not available when the Macro Light is on
Messages
Messages such as the following may appear on the display during
camera operation.
Message
Description
9
Appendix
The battery is exhausted. Charge the battery using the
Battery depleted
battery charger (p.33).
Memory card full
The SD Memory Card is full and no more images can be
saved.
The card memory is not Insert a new SD Memory Card or delete unwanted images.
enough to copy images/ (p.40, p.165)
Change the recorded pixels or quality level of recorded
sounds
images and try again (p.176).
Shooting and playback are impossible due to a problem
Memory card error
with the SD Memory Card. You may be able to display or
copy the images on the card using a computer.
The built-in memory is
The data within the built-in memory are damaged. Format
not formatted
the built-in memory.
The SD Memory Card you have inserted is unformatted or
has been formatted on a computer or other device and is
Card is not formatted
not compatible with this camera. Format the SD Memory
Card in the camera (p.214).
Card is locked
The SD Memory Card is write-protected (p.7).
This message occurs when the camera fails to compress an
Compression error
image. Change the quality level or recorded pixels of the
image and try shooting or saving it again.
There are no image or sound files on the SD Memory Card
No image/sound
or the built-in memory.
This message appears when the internal temperature of the
Movie recording stopped camera has exceeded normal operating limits while
recording a movie.
This message appears when deleting an image or sound
Deleting
file.
You are trying to play back an image or sound in a format
Camera cannot play this
not supported by this camera. You may be able to play it
image and sound
back on another brand of camera or on your computer.
The largest file number (9999) has been assigned to an
Image folder cannot be image in the largest folder number (999) and no more
created
images can be saved. Insert a new SD Memory Card or
format the card/built-in memory (p.214).
Protected
The image or sound file you are trying to delete is protected.
269
Message
Data being recorded
Data being processed
Built-in memory full
No image to be
processed
This image/sound
cannot be processed
No card in the camera
The built-in memory is
not enough to copy
images/sounds
Cannot process
correctly
Not enough battery
power remaining to
activate Pixel Mapping
No more images can be
selected
The camera will turn off
to prevent damage from
overheating
9
Appendix
270
Description
Displayed when you try to switch to Q mode while an
image is still being recorded, or when the protect setting or
DPOF setting is being changed. It disappears after the
image is recorded or the setting is changed.
Displayed when the camera takes more than five seconds
to display an image due to image processing, or when the
SD Memory Card or the built-in memory is being formatted.
Displayed if the built-in memory is full when saving a file.
Displayed when there are no images or sound files.
Displayed for files that cannot be processed.
Displayed if no SD Memory Card is inserted when “Image/
Sound Copy” is selected from the Playback Mode Palette
and the OK button is pressed.
Displayed when there is insufficient built-in memory to
perform copying.
Displayed when Red-eye Compensation processing fails.
Displayed when the battery is too low during Pixel Mapping.
Change the battery (p.34) or use the AC adapter kit
K-AC117 (optional) (p.38).
Displayed when you select more than the maximum
number of images.
Appears when the temperature inside the camera exceeds
the highest limit.
Troubleshooting
Problem
Cause
Remedy
9
Appendix
Check if a battery is installed. If not,
The battery is not installed
install a battery.
Check orientation of the battery.
The camera will
The battery is installed
Reinsert the battery according to the
not turn on
incorrectly
+- symbols in the battery
compartment (p.34).
The battery is exhausted
Charge the battery.
The camera is connected to The display is off when the camera
a computer
is connected to a computer.
No image appears The camera is connected to The display is off when the camera
on the display
a TV
is connected to a TV.
Press the 4/W button to
The display is set to off.
turn the display on.
Adjust the brightness level in
The brightness level of the
[Brightness Level] in the [W Setting]
display is set too dark
menu. (p.232)
When the Power Saving function is
on, the display automatically
The display is
darkens after a certain amount of
hard to see
time. Press a button to return to the
Power Saving function is on
normal brightness level.
Select [Off] in [Power Saving] in the
[W Setting] menu to turn the Power
Saving function off (p.233).
Pictures cannot be taken while the
The flash is charging
flash is charging. Wait until charging
is finished.
The shutter will
There is no available space Insert an SD Memory Card with
not release
on the SD Memory Card or available space or delete unwanted
in the built-in memory
images (p.40, 165).
Recording
Wait until recording is finished.
The picture becomes dark if the
The picture is dark The subject is too far away
subject is too far away. Take
when using the
in a dark environment, such
pictures within the specified flash
flash
as a night scene
range.
271
Problem
Cause
The subject is difficult to
focus on with autofocus
The subject is not
in focus
The subject is not in the
focusing area
Remedy
The camera may have difficulty in
focusing on such subjects as: low
contrast subjects (a white wall, a
blue sky, etc.), dark subjects, finelypatterned objects, rapidly-moving
objects. It is also difficult to get
proper focus when shooting through
a window or a net (p.67). Try
shooting using the focus lock, or
\ (Manual Focus) (p.111).
Locate the desired subject in the
focus frame (focusing area) in the
center of the display. If it is difficult to
do so, first lock the focus on the
desired subject (focus lock), and
then move the camera to
recompose.
Set to , (Auto) or b (Flash On)
(p.108).
The flash mode is set to
a (Flash Off)
The Drive Mode is set to
j (Continuous Shooting),
c (Burst Shooting), or
The flash does not l (Auto Bracketing);
discharge
the Focus Mode is set to
The flash does not discharge in
s (Infinity); or the Shooting these modes.
Mode is set to d (Movie),
(Underwater Movie),
S (Fireworks) or
(Digital Microscope).
Very occasionally, static electricity may cause camera to malfunction. In
this case, remove the battery and install it again. If the camera is then
working properly, you can continue using the camera.
9
Appendix
272
Default Settings
The table below lists the factory default settings.
The meaning of the indications for menu items with a default setting is
explained below.
Last Memory Setting
Yes
: The current setting (last memory) is saved when the
camera is turned off.
No
: The setting returns to the default setting when the camera
is turned off.
*
: The setting depends on the [Memory] setting (p.149).
—
: N/A
Reset Setting
Yes
: The setting returns to the default setting with the Reset
function (p.239).
No
: The setting is saved even after reset.
—
: N/A
[A Rec. Mode] Menu Items
Item
Reset
Setting
Page
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
p.115
p.116
p.118
p.119
p.112
p.113
p.114
p.121
p.122
p.123
p.124
9
Appendix
Image Tone
Recorded Pixels
Quality Level
White Balance
Focusing Area
AF
Auto Macro
Setting
Focus Assist
AE Metering
Sensitivity
AUTO ISO Range
EV Compensation
Last
Default Setting
Memory
(Shooting mode:A)
Setting
Bright
Yes
g (4288×3216)
Yes
D (Better)
Yes
F (Auto)
*
J (Multiple)
Yes
O (On)
Yes
O (On)
Yes
L (Multi-segment)
*
AUTO (80-800)
*
80-800
*
±0.0
*
273
Item
Recorded Pixels
Movie SR
Interval
Interval
Total Time
Shoot
Start Delay
D-Range Highlight Correction
Setting
Shadow Correction
Pixel Track SR
Interval
Interval
Number of Shots
Shoot
Start Delay
Blink Detection
Digital Zoom
Instant Review
Face Detection
Flash Mode
Drive Mode
Focus Mode
Zoom Position
MF Position
Memory White Balance
Sensitivity
EV Compensation
AE Metering
Digital Zoom
DISPLAY
File No.
Green Button
Sharpness
Saturation
Tone Adjustment
Contrast
Date Imprint
IQ Enhancer
Macro Light
Movie
9
Appendix
274
Last
Default Setting
Memory
(Shooting mode:A)
Setting
M
Yes
(1280×720/30 fps)
O (On)
Yes
1 min.
Yes
10 min.
Yes
In 0 hr. 0 min.
Yes
P (Off)
Yes
P (Off)
Yes
P (Off)
Yes
0 min. 10 sec.
Yes
2
Yes
In 0 hr. 0 min.
Yes
O (On)
Yes
O (On)
*
O (On)
Yes
P (Off)
Yes
O (On)
Yes
P (Off)
Yes
P (Off)
Yes
P (Off)
Yes
P (Off)
Yes
P (Off)
Yes
P (Off)
Yes
P (Off)
Yes
P (Off)
Yes
O (On)
Yes
P (Off)
Yes
O (On)
Yes
Green Mode
Yes
G (Normal)
Yes
G (Normal)
Yes
G (B&W)
Yes
G (Normal)
Yes
P (Off)
Yes
O (On)
Yes
P (Off)
Yes
Reset
Setting
Page
Yes
p.143
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
p.144
p.145
p.145
p.145
p.125
p.125
p.126
p.127
p.127
p.127
p.129
p.81
p.130
p.149
p.130
p.134
p.135
p.135
p.136
p.136
p.137
p.138
[W Setting] Menu Items
Reset
Setting
Page
Yes
Yes
Yes
Yes
Yes
Yes
p.215
No
No
No
p.49
p.217
No
Yes
Yes
p.219
Yes
No
No
p.221
No
No
No
No
Yes*1
Yes
p.224
p.45
p.225
p.226
p.247
No
p.228
Yes
Yes
Yes
Yes
Yes
Yes
Yes
⎯
⎯
⎯
⎯
p.229
p.231
p.232
p.233
p.234
p.235
p.236
p.239
p.168
p.237
p.214
9
Appendix
Last
Default Setting Memory
Setting
Operation Volume
3
Yes
Playback Volume
3
Yes
Start-up Sound
Yes
Off
Sound
Shutter Sound
Yes
1
Operation Sound
Yes
1
Self-timer Sound
1
Yes
According to
Date Format (Date)
Yes
initial setting
Date Format (time)
24h
Yes
Date
Adjustment Date
1/1/2013
Yes
According to
Time
Yes
initial setting
Alarm
P (Off)
Yes
Alarm
Time
0:00
Yes
Same as W
Select Time
Yes
Hometown
According to
Destination (City)
Yes
initial setting
World
Time
Destination (DST)
P (Off)
Yes
According to
Hometown (City)
Yes
initial setting
Hometown (DST)
P (Off)
Yes
Text Size
Standard
Yes
According to
Yes
Language/
initial setting
Folder Name
Date
Yes
USB Connection
Yes
MSC
According to
Video Out
Yes
initial setting
HDMI Out
Auto
Yes
Eye-Fi
P (Off)
Yes
Brightness Level
G
Yes
Power Saving
5 sec.
Yes
Auto Power Off
3 min.
Yes
Quick Zoom
P (Off)
Yes
Guide Display
O (On)
Yes
Reset
Cancel
⎯
Delete All
Cancel
⎯
Pixel Mapping
Cancel
⎯
Format
Cancel
⎯
Item
*1 Except the folder name that you created
275
Playback Mode Palette Items
Item
Default Setting
Interval
Slideshow Screen Effect
Sound Effect
Image Rotation
Small Face Filter
Ink Rubbing Filter
Recorded Pixels
Layout
Collage
Background
Select image(s)
Digital Filter
Blur
Original
Frame
Edge Composite
Frame Composite
Save as Still Image
Movie
Divide Movies
Editing
Adding title picture
Red-eye Compensation
3 sec.
Wipe
On
Normal
Approx. 7%
3
Recorded Pixels
Resize
Quality Level
Cropping
Image/Sound Copy
9
Appendix
276
Voice Memo
Single Image/
Sound
Protect
All Images/
Sounds
Single Image
DPOF
All Images
Start-up Screen
h/h
White
⎯
B&W/Sepia
All sides/White
All sides/White
Default1
⎯
⎯
⎯
⎯
Depending on the
picture taken
Depending on the
picture taken
Depending on the
picture taken
Built-in memory →
SD Memory Card
⎯
Depending on the
recorded image/sound
Depending on the
recorded image/sound
Copies: 0
Date: Off
Default1
Last Memory Reset
Page
Setting
Setting
Yes
Yes
Yes
Yes p.158
Yes
Yes
⎯
⎯
p.161
No
No
p.178
No
No
p.185
Yes
Yes
Yes
Yes
p.186
Yes
Yes
⎯
⎯
No
⎯
p.180
No
⎯
p.195
No
⎯
Yes
Yes p.192
⎯
⎯
⎯
⎯
p.200
⎯
⎯
⎯
⎯
p.191
⎯
⎯
p.176
⎯
⎯
p.176
⎯
⎯
p.177
⎯
⎯
p.203
⎯
⎯
p.212
⎯
⎯
⎯
⎯
⎯
⎯
Yes
⎯
⎯
Yes
p.169
p.205
p.238
Key Operation
Last
Memory
Setting
Reset
Setting
Item
Function
Default Setting
Q button
w/x button
Operation Mode
Q Mode
Full wide-angle
⎯
⎯
⎯
Zoom Position
*
No
2
Drive Mode
9 (Standard)
*
Yes
p.79
p.94 p.101
3
Shooting Mode
b (Auto Picture)
Yes
Yes
p.69
4
Flash Mode
, (Auto)
*
Yes
p.108
5
Focus Mode
*
Yes
p.110
3 button
Menu Display
= (Standard)
Shooting mode:
[A Rec. Mode] menu
Playback mode:
[W Setting] menu
⎯
⎯
p.57
4/W
button
Information
Display
Standard
*
Yes
p.23
I button
Operation Mode
Face Detection
On
*
Yes
p.71
Green Button
Function Recall
Green Mode
Yes
Yes
p.77
Four-way
controller
Page
9
Appendix
277
List of World Time Cities
City: indicates cities that can be set as either the Initial Setting (p.45) or
the World Time (p.221).
Video Output Format: indicates the video output format of the city set
as the Initial Setting.
Region
North
America
Central and
South
America
Europe
9
Appendix
Africa/West
Asia
278
City name
Video output
format
Honolulu
NTSC
Anchorage
NTSC
Vancouver
NTSC
Region
Africa/West
Asia
City name
Istanbul
Video output
format
PAL
Cairo
PAL
Jerusalem
PAL
San Francisco
NTSC
Nairobi
PAL
Los Angeles
NTSC
Jeddah
PAL
Calgary
Denver
NTSC
NTSC
Tehran
Dubai
PAL
PAL
Chicago
NTSC
Karachi
PAL
Miami
NTSC
Kabul
PAL
Toronto
NTSC
Male
PAL
New York
NTSC
Delhi
PAL
Halifax
Mexico City
NTSC
NTSC
Colombo
Kathmandu
PAL
PAL
Lima
NTSC
Santiago
NTSC
Dacca
PAL
Yangon
NTSC
Caracas
Buenos Aires
NTSC
Bangkok
PAL
PAL
Kuala Lumpur
PAL
Sao Paulo
PAL
Vientiane
PAL
Rio de Janeiro
Lisbon
NTSC
PAL
Singapore
Phnom Penh
PAL
PAL
East Asia
Madrid
PAL
Ho Chi Minh
PAL
London
PAL
Jakarta
PAL
Paris
PAL
Hong Kong
PAL
Amsterdam
PAL
Beijing
PAL
Milan
Rome
PAL
PAL
Shanghai
Manila
PAL
NTSC
Copenhagen
PAL
Taipei
NTSC
Berlin
PAL
Seoul
NTSC
NTSC
Prague
PAL
Tokyo
Stockholm
PAL
Guam
NTSC
Budapest
Warsaw
PAL
PAL
Perth
Adelaide
PAL
PAL
Athens
PAL
Sydney
PAL
Helsinki
PAL
Noumea
PAL
Moscow
PAL
Wellington
PAL
Dakar
PAL
Auckland
PAL
Algiers
Johannesburg
PAL
PAL
Pago Pago
NTSC
Oceania
Main Specifications
Type
Number of effective
pixels
Image sensor
Fully automatic compact digital still camera with built-in zoom lens
Approx. 14 megapixels
Number of recorded
pixels
Still
1/2.3 inch CCD
g (4288×3216), j (3216×3216), i (4224×2376),
6 (3072×2304),
(3072×1728), f (2592×1944),
(2592×1464), h (2048×1536), h (1920×1080),
l (1024×768), m (640×480)
* Fixed at f/
in Digital SR mode.
* Fixed at h/h in Frame Composite mode.
* Fixed at f in Digital Wide mode, however, the first frame uses h.
* Fixed at i for one frame in Digital Panorama mode.
* Fixed at h in Digital Microscope mode.
* Fixed at f/
when the sensitivity is set to 3200 or 6400.
* Fixed at f/
in Burst Shooting mode.
* Fixed at V (1280×960) in Report mode.
Movie
Sensitivity
File format
M (1280×720/30 fps), F (1280×720/15 fps)
G (640×480/30 fps), H (640×480/15 fps)
I (320×240/30 fps), J (320×240/15 fps)
AUTO, Manual (ISO 80-6400)
* The sensitivity is fixed at AUTO (80-6400) in Digital SR mode.
Still
Movie
Sound
Quality level
Storage media
Still
JPEG (Exif 2.3), DCF 2.0, DPOF,
PRINT Image Matching III
AVI (Motion JPEG), approx. 30 fps/15 fps, PCM system,
monaural sound, Movie SR (Movie Shake Reduction)
Voice memo, voice recording: WAVE (PCM) system,
monaural
C “Best”, D “Better”, E “Good”
Movie Fixed at C (Best) *Unchangeable
Built-in memory (approx. 97.0 MB), SD Memory Card, SDHC Memory
Card, SDXC Memory Card
9
Appendix
279
Approximate Image Storage Capacity and Recording Time
Still
Built-in Memory
g
(4288×3216)
j (3216×3216)
i (4224×2376)
6
(3072×2304)
(3072×1728)
f
(2592×1944)
(2592×1464)
h
(2048×1536)
h (1920×1080)
V
(1280×960)
l
(1024×768)
m
(640×480)
C
19
pictures
24
pictures
24
pictures
33
pictures
39
pictures
39
pictures
49
pictures
61
pictures
90
pictures
141
pictures
214
pictures
443
pictures
D
39
pictures
49
pictures
49
pictures
61
pictures
75
pictures
75
pictures
98
pictures
121
pictures
177
pictures
258
pictures
365
pictures
690
pictures
E
61
pictures
70
pictures
70
pictures
81
pictures
109
pictures
109
pictures
151
pictures
177
pictures
238
pictures
365
pictures
477
pictures
776
pictures
2 GB
SD Memory Card
C
D
E
394
778
1205
pictures pictures pictures
487
975
1397
pictures pictures pictures
487
975
1397
pictures pictures pictures
653
1205
1617
pictures pictures pictures
778
1499
2119
pictures pictures pictures
778
1499
2119
pictures pictures pictures
975
1921
2927
pictures pictures pictures
1205
2364
3415
pictures pictures pictures
1756
3415
4728
pictures pictures pictures
2794
5122
6830
pictures pictures pictures
4098
6830
8782
pictures pictures pictures
8782
12294
15368
pictures pictures pictures
• The image storage capacity is for reference only. The actual image storage capacity
may vary depending on the SD Memory Card and the subject.
• V (1280×960) can only be set for recorded pixels when
(Report) mode is set.
9
Appendix
280
Movie/Sound
Built-in Memory
M (1280×720/30 fps)
F (1280×720/15 fps)
G (640×480/30 fps)
H (640×480/15 fps)
I (320×240/30 fps)
J (320×240/15 fps)
Sound
30 sec.
1min.
1min. 28 sec.
2min. 47 sec.
2min. 15 sec.
4min. 8 sec.
26min. 30 sec.
2 GB
SD Memory Card
10 min. 8 sec.
19 min. 42 sec.
29 min. 16 sec.
53 min. 55 sec.
44 min. 32 sec.
1 hr. 18 min. 48 sec.
8 hr. 44 min. 34 sec.
• The above figures are based on our standard shooting conditions and may vary
depending on the subject, shooting conditions and type of the SD Memory Card
used.
• Recording can continue until the built-in memory or the SD Memory Card is full, or
the size of the recorded movie reaches 2 GB (when using an SDHC card). If
recording stops at 2 GB, start recording again to continue to record the rest of the
movie in blocks of 2 GB.
White balance
Auto, Daylight, Shade, Tungsten Light, Fluores. Light, Manual
Lens
Focal Length
5.0 - 25.0 mm
(approx. 28 mm - 140 mm in 35 mm equivalent
focal length)
Aperture
F3.5 (W) - F5.5 (T)
Lens Composition 11 elements in 9 groups (5 aspherical elements)
Zoom Type
Electrically driven
Optical zoom
5×
Intelligent zoom
6/
: approx. 7×, f/
:approx. 8.3×,
h: approx. 10.5×, h: approx. 11.2×, l: approx. 20.9×,
m: approx. 33.5× (when combined with optical zoom)
Digital zoom
Max. approx. 6.7× (combines with 5× optical zoom to give zoom
magnification equivalent to 33.5×)
Motion blur reduction Still
Movie
Electronic shake reduction (Pixel Track SR),
Hi-sensitivity shake reduction (Digital SR)
Electronic movie shake reduction (Movie SR)
Display
2.7 inch wide-LCD, approx. 230,000 dots (AR coating (cover only))
Playback modes
Single-frame, 6-frame, 12-frame, Enlargement (max. 10×, scrollable),
Face Close-up Playback, Pet Close-up Playback, Folder Display,
Calendar Display, Sound Playback, Histogram Display, Bright and
Dark Area Compensation, Select & Delete, Slideshow, Resize,
Cropping, Image/Sound Copy, Image Rotation, Digital Filter, Original
Frame, Ink Rubbing Filter, Collage, Small Face Filter, Movie
Playback/Edit (Save as Still image, Divide, Adding title picture),
Frame Composite, Red-eye Compensation, Voice Memo, Protect,
DPOF, Start-up Screen
Focus mode
Autofocus, Macro, 1cm Macro, Pan Focus, Infinity, Manual Focus
9
Appendix
281
Focus
Type
TTL contrast detection system by sensor
Multiple (9-point autofocus)/spot/automatic
tracking AF changeable
Focus range
(From lens face)
Standard
: 0.5 m - ∞ (Full zoom range)
Macro
: 0.1 m - 0.6 m (Full zoom range)
1cm Macro : 0.01 m - 0.3 m (At the intermediate
position of the zoom range)
* It is possible to switch to Infinity, Pan Focus and
Manual Focus.
* Face Detection AF is available only when the
camera recognizes the subject’s face.
Focus Lock
By half-pressing the shutter release button
Exposure control
AE Metering
Multi-segment metering, Center-weighted
metering, Spot metering
Face detection
Detection of up to 32 people’s faces (up to 31 face detection frames
on the display), Smile Capture, Blink Detection, Self-portrait Assist,
Self-portrait Assist + Smile Capture
* Face Detection AE is available only when the camera detects the
subject’s face.
Pet detection
Registering: 3, Detecting: 1
Shooting mode
Auto Picture, Program, Night Scene, Movie, Underwater, Underwater
Movie, Landscape, Flower, Portrait, Digital Wide, Surf & Snow, Digital
SR, Kids, Pet, Sport, Fireworks, Candlelight, Night Scene Portrait,
Text, Food, Digital Panorama, Frame Composite, Report, Digital
Microscope, Green, Voice Recording (can be used when Fn Setting
assigned)
Digital filter
B&W/Sepia, Toy Camera, Retro, Color (red, pink, purple, blue, green,
yellow), Extract Color (red, green, blue), Color Emphasis (Sky Blue,
Fresh Green, Delicate Pink, Autumn Leaves), High Contrast,
Starburst (Cross, Heart, Star), Soft, Fish-eye, Brightness, Miniature
Movie
Continuous
Recording Time
Shutter speed
1/1500 sec. - 1/4 sec., max. 4 sec. (Night Scene mode)
Built-in flash
Modes
Auto, Flash Off, Flash On, Auto + Red-eye, Flash
On + Red-eye
Flash Range
Wide-angle: approx. 0.2 m - 3.9 m
(approx. 0.66 ft - 13 ft) (Sensitivity: in Auto condition)
Telephoto: approx. 0.2 m - 2.5 m
(approx. 0.66 ft - 8.2 ft) (Sensitivity: in Auto condition)
EV Compensation ±2 EV (can be set in 1/3 EV steps)
9
Appendix
282
Approx. 1 second - until built-in memory or SD Memory
Card is full (however, maximum size is limited to 2 GB)
Drive mode
Single-frame, Self-timer (approx. 10 sec., approx. 2 sec.), Continuous
Shooting, Burst Shooting, Remote Control (3-sec Remote Control,
0-sec Remote Control), Interval Shoot, Auto Bracketing
Self-timer
Electronic control type, control time: Approx. 10 sec., 2 sec.
Time function
World Time
75 cities (28 time zones)
Clock Mode
Clock display by holding down 4/W
button while camera is turned off (approx. 10 sec.)
Alarm
Alarm with simultaneous display of the Clock
mode at specified time
Power source
Rechargeable lithium-ion battery D-LI92, AC adapter kit (optional)
Battery life
Image Storage
Capacity
Approx. 260
pictures
* Recording capacity shows approximate number
of shots recorded during CIPA-compliant testing
(with display on, flash used for 50% of the shots,
and 23°C or 73.4°F). Actual performance may
vary according to operating conditions.
Playback Time
Approx. 280 min.
* According to the results of in-house testing.
Movie Recording
Time
Approx. 120 min.
* According to the results of in-house testing.
Sound Recording
Time
Approx. 350 min.
* According to the results of in-house testing.
Interfaces
USB 2.0 (high-speed compatible) /PC/AV terminal /
HDMI terminal (Type D (Micro))
Video output format
NTSC/PAL (monaural)
Waterproof and
dustproof rating
JIS waterproof grade 8 and JIS dustproof grade 6 (IP68) Continuous
underwater picture-taking possible for 2 hours at depth of 10 m.
Impact resistance
rating
PENTAX drop test (1.5 m height onto a 5 cm thick plywood surface)
complying with MIL-Standard 810F Method 516.5-Shock testing.
* Waterproof performance is not guaranteed if the camera is exposed
to impact such as being dropped or hit.
* The camera is not guaranteed to be free of trouble or damages
under every condition.
Dimensions
Approx. 115.5 (W) × 58.5 (H) × 28.5 (D) mm (excluding operating or
protruding parts)
Weight
Approx. 146g (excluding battery and SD Memory Card)
Approx. 166g (including battery and SD Memory Card)
Accessories
Rechargeable lithium-ion battery, Battery charger, AC plug cord, USB
cable, Software (CD-ROM), Strap, Macro stand, Operating Manual,
Quick Guide
9
Appendix
283
Warranty Policy
All PENTAX cameras purchased through authorized bona fide photographic
distribution channels are guaranteed against defects of material or workmanship
for a period of twelve months from date of purchase. Service will be rendered, and
defective parts will be replaced without cost to you within that period, provided the
equipment does not show evidence of impact, sand or liquid damage,
mishandling, tampering, battery or chemical corrosion, operation contrary to
operating instructions, or modification by an unauthorized repair shop. The
manufacturer or its authorized representatives shall not be liable for any repair or
alterations except those made with its written consent and shall not be liable for
damages from delay or loss of use or from other indirect or consequential
damages of any kind, whether caused by defective material or workmanship or
otherwise; and it is expressly agreed that the liability of the manufacturer or its
representatives under all guarantees or warranties, whether expressed or
implied, is strictly limited to the replacement of parts as hereinbefore provided. No
refunds will be made on repairs by non-authorized PENTAX service facilities.
9
Appendix
284
Procedure During 12-month Warranty Period
Any PENTAX which proves defective during the 12-month warranty period should
be returned to the dealer from whom you purchased the equipment or to the
manufacturer. If there is no representative of the manufacturer in your country,
send the equipment to the manufacturer, with postage prepaid. In this case, it will
take a considerable length of time before the equipment can be returned to you
owing to the complicated customs procedures required. If the equipment is
covered by warranty, repairs will be made and parts replaced free of charge, and
the equipment will be returned to you upon completion of servicing. If the
equipment is not covered by warranty, regular charges of the manufacturer or of
its representatives will apply. Shipping charges are to be borne by the owner. If
your PENTAX was purchased outside of the country where you wish to have it
serviced during the warranty period, regular handling and servicing fees may be
charged by the manufacturer’s representatives in that country. Notwithstanding
this, your PENTAX returned to the manufacturer will be serviced free of charge
according to this procedure and warranty policy. In any case, however, shipping
charges and customs clearance fees to be borne by the sender. To prove the date
of your purchase when required, please keep the receipt or bills covering the
purchase of your equipment for at least a year. Before sending your equipment
for servicing, please make sure that you are sending it to the manufacturer’s
authorized representatives or their approved repair shops, unless you are
sending it directly to the manufacturer. Always obtain a quotation for the service
charge, and only after you accept the quoted service charge, instruct the service
station to proceed with the servicing.
• This warranty policy does not affect the customer’s statutory rights.
• The local warranty policies available from PENTAX distributors in some
countries can supersede this warranty policy. Therefore, we recommend
that you review the warranty card supplied with your product at the time
of purchase, or contact the PENTAX distributor in your country for more
information and to receive a copy of the warranty policy.
9
Appendix
The CE Mark is a Directive conformity mark of the European
Union.
285
For customers in USA
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
For customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
9
Appendix
286
Pour les utilisateurs au Canada
Cet appareil numérique de la classe B est conforme à la norme NMB003 du Canada.
FOR CALIFORNIA, U.S.A. ONLY
Perchlorate Material-special handling may apply. The lithium battery
used in this camera contains perchlorate material, which may require
special handling. See www.dtsc.ca.gov/hazardouswaste/perchlorate
Declaration of Conformity
According to 47CFR, Parts 2 and 15 for
Class B Personal Computers and Peripherals
We:
PENTAX RICOH IMAGING AMERICAS
CORPORATION
Located at: 633 17 th Street, Suite 2600,
Denver, Colorado 80202, U.S.A.
Phone: 800-877-0155 Fax: 303-790-1131
Declare under sole responsibility that the product identified herein complies with
47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product
marketed is identical to the representative unit tested and found to be compliant
with the standards. Records maintained continue to reflect the equipment being
produced can be expected to be within the variation accepted, due to quantity
production and testing on the statistical basis as required by 47CFR §2.909.
Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. The above named
party is responsible for ensuring that the equipment complies with the standards
of 47CFR §15.101 to §15.109.
Product Name: Digital Camera
Model Number: PENTAX WG-10
Contact person: Customer Service Manager
Date and Place: January, 2013, Colorado
9
Appendix
287
Information for Users on Collection and Disposal of Old Equipment
and Used Batteries
1. In the European Union
These symbols on the products, packaging and/or
accompanying documents mean that used electrical
and electronic equipment and batteries should not be
mixed with general household waste.
Used electrical/electronic equipment and batteries must
be treated separately and in accordance with legislation
that requires proper treatment, recovery and recycling
of these products.
By disposing of these products correctly you will help
ensure that the waste undergoes the necessary
treatment, recovery and recycling and thus prevent
potential negative effects on the environment and
human health which could otherwise arise due to
inappropriate waste handling.
If a chemical symbol is added beneath the symbol shown above, in
accordance with the Battery Directive, this indicates that a heavy metal
(Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in the battery at a
concentration above an applicable threshold specified in the Battery
Directive.
For more information about collection and recycling of used products,
please contact your local authorities, your waste disposal service or the
point of sale where you purchased the products.
9
Appendix
288
2. In other countries outside the EU
These symbols are only valid in the European Union. If you wish to
discard used products, please contact your local authorities or dealer
and ask for the correct method of disposal.
For Switzerland: Used electrical/electronic equipment can be returned
free of charge to the dealer, even when you don’t purchase a new
product. Further collection facilities are listed on the home page of
www.swico.ch or www.sens.ch.
Index
Symbols
Underwater Movie ......139
K Food ..............................70
Report ..........................71
Digital Microscope .........90
N Frame Composite ........92
U Candlelight ....................81
c Portrait ..........................83
Numerics
1cm Macro
...................110
6-Image Display/
12-Image Display .............153
A
AC adapter .........................38
Adding sound
(Voice Memo) ..................212
AE Metering .....................121
Alarm ...............................219
Auto + Red-eye
c (Flash) .........................108
Auto Bracketing a ..........101
AUTO ISO Range ............123
Auto Macro ......................113
Auto Picture Mode .............75
Auto Power Off ................234
Auto F
(White Balance) ...............119
Auto , (Flash) .................108
Automatic Tracking AF ....112
AV cable ..........................173
B
B&W/Sepia filter ...............180
Basic Mode ........................77
Battery Level Indicator .......37
Blink Detection ...........68, 129
9
Appendix
A Mode ...................... 18, 56
I button ..................... 53, 55
Q Mode ..................... 18, 56
Q button .................... 52, 54
[A Rec. Mode] Menu
.................................. 61, 273
[W Setting] Menu ....... 63, 275
9 Green Mode ................. 77
i Delete ................. 151, 165
f/y button ...................... 54
y Magnify ....................... 162
x Tele ............................... 79
i 3-sec Remote Control
.......................................... 97
h 0-sec Remote Control
.......................................... 97
w Wide ............................ 79
w/x button ...................... 52
b Auto Picture ................. 75
A Night Scene ................. 81
B Night Scene Portrait ..... 81
C Movie .......................... 141
Q Surf & Snow ................. 88
\ Sport ............................. 88
c Digital SR ................... 81
R Kids ............................... 84
e Pet ................................ 85
R Program ....................... 76
S Fireworks ..................... 81
B Text ............................... 89
X Digital Wide ............. 102
F Digital Panorama ...... 105
a Landscape ................... 70
b Flower ........................... 70
Underwater ................ 139
289
Brightness filter ................ 180
Brightness Level .............. 232
Built-in Memory ............... 203
Burst Shooting ................... 95
C
Calendar display .............. 155
Camera shake ............. 23, 80
Candlelight Mode .............. 81
Capture Mode Palette ....... 70
Changing volume ............ 215
Charging a battery ............. 33
Checking the
Memory Card ..................... 43
Clock Mode ..................... 240
Collage ............................ 186
Color emphasis filter ........ 180
Color filter ........................ 180
Connecting the Camera to
AV Equipment ................. 172
Connecting to a TV .......... 172
Continuous Shooting ......... 95
Contrast ........................... 136
Copy ................................ 203
Cropping .......................... 177
D
9
Appendix
290
Date Adjustment ........ 49, 217
Date Imprint ..................... 136
Daylight saving time .......... 48
Default Settings ............... 273
Delete all ......................... 168
Delete i ................. 151, 165
Deleting sounds ............... 166
Digital Filter ..................... 180
Digital Microscope Mode ... 90
Digital SR Mode ................ 81
Digital Wide Mode ........... 102
Digital Zoom ...................... 81
Display brightness ........... 232
Display Language ............225
Dividing movies ................201
DPOF settings .................205
D-Range Setting ..............125
Drive Mode
.......................94, 95, 99, 101
E
EV Compensation ............124
Extract color filter .............180
Eye-Fi ......................231, 264
F
Face Close-up Playback ..163
Face Detection ...................71
Filters ...............................180
Fireworks Mode .................81
Fish-eye filter ...................180
Flash Mode ......................108
Flash Off a (Flash) .........108
Flash On b (Flash) .........108
Flash On + Red-eye
d (Flash) .........................108
Flower ................................70
Focus Assist ....................114
Focus Mode .....................110
Focusing ..........................110
Focusing Area ..................112
Folder display ..................154
Folder Name ....................226
Food ...................................70
Format .............................214
Four-way controller ......53, 55
Frame Composite ......92, 192
Frame Rate ......................143
G
Green button ....................130
Green button X ...........53, 55
Green Mode .......................77
Guide Display ....................30
H
HDMI ............................... 229
High contrast filter ........... 180
Highlight Correction ......... 125
Histogram .......................... 30
Hometown ................. 48, 221
I
Image Rotation ................ 161
Image Storage Capacity .. 280
Image Tone ..................... 115
Image/Sound Copy .......... 203
Infinity s ......................... 110
Initial Setting ...................... 45
Ink Rubbing Filter ............ 185
Installing a battery ............. 34
Installing the software ...... 244
Instant Review ........... 68, 130
Interval Movie Mode ........ 145
Interval Shoot k ...... 99, 127
IQ Enhancer .................... 137
K
Kids Mode ......................... 84
L
Landscape ......................... 70
Language setting ....... 45, 225
M
N
Night Scene Mode .............81
Night Scene Portrait
Mode ..................................81
Number of pixels ..............116
O
4/W button ...53, 55
Operating the Menus .........57
Original Frame .................195
P
Pan Focus 3 .................110
Panoramic Pictures ..........105
Pet Mode ...........................85
Photo processing lab .......205
Picture Transfer Protocol
.........................................248
Pixel Mapping ..................237
Pixel Track SR .................126
Playback ..................151, 152
Playback (sound) .............210
Playback (Voice Memo) ...213
Playback Mode Palette
.................................157, 276
Playing back movies ........152
Portrait Mode .....................83
Power Saving ...................233
Power switch ..........43, 52, 54
Press fully
(shutter release button) ......67
Press halfway
(shutter release button) ......67
9
Appendix
Macintosh ........................ 243
Macro q .......................... 110
Macro Light ...................... 138
Magnify y ....................... 162
Manual Focus \ ........... 110
Manual K (White Balance)
........................................ 120
Mass Storage Class ........ 248
MediaImpression ............. 241
Memory ........................... 149
3 button .............. 52, 54
Miniature filter ..................180
Movie Editing ...................200
Movie SR (Movie Shake
Reduction) Function .........144
MSC .................................248
Multi-segment metering L
.........................................121
291
Product registration ......... 246
Program Mode ................... 76
Protect Z ...................... 169
Provided software ............ 241
PTP ................................. 248
R
Rec. Mode Menu ....... 61, 273
Recorded Pixels ...... 116, 143
Recording movies ............ 141
Red-eye Compensation ... 191
Red-eye reduction
cd (Flash) ..................... 108
Regarding Waterproof,
Dustproof, and Shockproof
Design ................................. 9
Remote Control Unit .......... 97
Report ................................ 71
Reset ............................... 239
Resetting settings ............ 239
Resize ............................. 176
Retro filter ........................ 180
Rotating ........................... 161
S
9
Appendix
292
Saturation ........................ 135
Saving as still picture
(movie) ............................ 200
Saving pictures by date ... 226
Saving settings ................ 149
SD Memory Card ............... 40
Select Time ..................... 223
Self-portrait Assist ............. 74
Self-timer g ...................... 94
Sensitivity ........................ 122
Setting Menu ............. 63, 275
Shadow Correction .......... 125
Sharpness ....................... 134
Shooting information ......... 23
Shooting Mode .................. 69
Shutter release button
...............................52, 54, 67
Slideshow ........................158
Small Face Filter ..............178
Smile Capture ....................72
Soft filter ...........................180
Sound settings .................215
Sound types .....................215
Specifications ...................279
Sport Mode ........................88
Standard = ...................110
Starburst filter ..................180
Starting-up in the Playback
Mode ..................................44
Start-up screen ................238
Strap ..................................32
Surf & Snow Mode .............88
System requirements .......242
T
Taking pictures underwater
.........................................139
Text Mode ..........................89
Text Size ..........................224
Title picture of movie ........202
Tone Adjustment ..............135
Toy camera filter ..............180
U
Underwater Mode ............139
Underwater Movie Mode
.........................................139
USB Connection ..............247
V
Video output format
.................................228, 278
Voice Memo .....................212
Voice Recording ..............208
W
Waterproof and Dustproof
........................................ 139
White Balance ................. 119
Windows .......................... 242
World Time ...................... 221
Z
Zoomxw ........................ 79
9
Appendix
293
Memo
Memo
PENTAX RICOH IMAGING CO., LTD.
2-35-7, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.jp)
PENTAX RICOH IMAGING
FRANCE S.A.S.
(European Headquarters)
112 Quai de Bezons, B.P. 204, 95106 Argenteuil Cedex,
FRANCE
(HQ - http://www.pentax.eu)
(France - http://www.pentax.fr)
PENTAX RICOH IMAGING
DEUTSCHLAND GmbH
Julius-Vosseler-Strasse 104, 22527 Hamburg,
GERMANY
(http://www.pentax.de)
PENTAX RICOH IMAGING
UK LTD.
PENTAX House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.pentax.co.uk)
PENTAX RICOH IMAGING 633 17th Street, Suite 2600, Denver, Colorado 80202,
AMERICAS CORPORATION U.S.A.
(http://www.pentaximaging.com)
PENTAX RICOH IMAGING
CANADA INC.
1770 Argentia Road Mississauga, Ontario L5N 3S7,
CANADA
(http://www.pentax.ca)
PENTAX RICOH IMAGING
CHINA CO., LTD.
23D, Jun Yao International Plaza, 789 Zhaojiabang
Road, Xu Hui District, Shanghai, 200032, CHINA
(http://www.pentax.com.cn)
http://www.pentax.jp/english
• Specifications and external dimensions are subject to change without notice.
54767
Copyright © PENTAX RICOH IMAGING CO., LTD. 2013
R02BAG13 Printed in Indonesia
">