ESAB LAF 1600 User manual

LAF 1600 DC
101103105107109111102021110025108024042106023061104022041100020040060001
Bruksanvisning
Brugsanvisning
Bruksanvisning
Käyttöohjeet
Instruction manual
Betriebsanweisung
Manuel d’instructions
Gebruiksaanwijzing
0449 017 301 2006--06--26
Instrucciones de uso
Istruzioni per l’uso
Manual de instruções
Ïäçãßåò ÷ñÞóåùò
Instrukcja obs³ugi
Návod k pou¾ívání
Eksploatavimo instrukcijos
Valid for Serial NO 624
SVENSKA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
DANSK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
NORSK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
SUOMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
ENGLISH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
DEUTSCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
FRANÇAIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
NEDERLANDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
ITALIANO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
PORTUGUÊS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
ÅËËÇÍÉÊÁ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
POLSKI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
ÈESKY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
LIETUVIÙK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Rätt till ändring av specifikationer utan avisering förbehålles.
Ret til ændring af specifikationer uden varsel forbeholdes.
Rett til å endre spesifikasjoner uten varsel forbeholdes.
Oikeudet muutoksiin pidätetään.
Rights reserved to alter specifications without notice.
Änderungen vorbehalten.
Sous réserve de modifications sans avis préalable.
Recht op wijzigingen zonder voorafgaande mededeling voorbehouden.
Reservado el derecho de cambiar las especificaciones sin previo aviso.
Ci riserviamo il diritto di variare le specifiche senza preavviso.
Reservamo--nos o direito de alterar as especificações sem aviso prévio.
Äéáôçñåßôáé ôï äéêáßùìá ôñïðïðïßçóçò ðñïäéáãñáöþí ×ùñßò ðñïåéäïðïßçóç.
Zastrzegamy sobie prawo do wprowadzenia zmian.
Výrobce si vyhrazuje právo na zmìnu údajû bez pøedcházejiciho upozomìni.
Įmonė pasilieka teisę keisti specifikacijas be įspėjimo.
-- 2 --
FÖRSÄKRAN OM ÖVERENSSTÄMMELSE
ESAB AB, Welding Equipment, 695 81 Laxå, Sverige, försäkrar under eget ansvar att svetsströmkälla
LAF 1600 från serienummer 606 är i överensstämmelse med standard EN 60974--1 enligt villkoren i
direktiv (73/23/EEG) med tillägg (93/68/EEG) och standard EN 60974--10 enligt villkoren i direktiv
(89/336/EEG) med tillägg (93/68/EEG).
-----------------------------------------------------------------------------------------------------------------------------------------------------------------OVERENSSTEMMELSEERKLÆRING
ESAB AB, Welding Equipment, S--695 81 Laxå, Sverige, erklærer på eget ansvar, at svejsestrømkilde
LAF 1600 fra serienummer 606 er i overensstemmelse med standarden EN 60974--1 ifølge betingelserne i direktiv (73/23/EØF) med tillæg (93/68/EØF) og standarden EN 60974--10 ifølge betingelserne
i direktiv (89/336/EØF) med tillæg (93/68/EØF).
-----------------------------------------------------------------------------------------------------------------------------------------------------------------FORSIKRING OM SAMSVAR
ESAB AB, Welding Equipment, S--695 81 Laxå, Sverige, forsikrer på eget ansvar at sveisestrømkilde
LAF 1600 fra serienummer 606 er i overensstemmelse med standard EN 60974--1 i følge vilkårene i
direktiv (73/23/EF) med tillegg (93/68/EF) og standard EN 60974--10 i følge vilkårene i direktiv
(89/336/EF) med tillegg (93/68/EF).
-----------------------------------------------------------------------------------------------------------------------------------------------------------------VAATIMUSTENMUKAISUUSVAKUUTUS
ESAB AB, Welding Equipment, S--695 81 Laxå, Ruotsi, vakuuttaa omalla vastuullaan, että hitsausvirtalähde LAF 1600 alkaen sarjanumerosta 606 täyttää standardin EN 60974--1 vaatimukset direktiivin
(73/23/ETY) ja sen lisäysten (93/68/ETY) ehtojen mukaisesti sekä standardin EN 60974--10 vaatimukset direktiivin (89/336/ETY) ja sen lisäysten (93/68/ETY) ehtojen mukaisesti.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------DECLARATION OF CONFORMITY
ESAB AB, Welding Equipment, S--695 81 Laxå, Sweden, gives its unreserved guarantee that welding
power source LAF 1600 from serial number 606 complies with standard EN 60974--1, in accordance
with the requirements of directive (73/23/EEC) and addendum (93/68/EEC) and with standard EN
60974--10 in accordance with the requirements of directive (89/336/EEC) and addendum
(93/68/EEC).
-----------------------------------------------------------------------------------------------------------------------------------------------------------------ZULASSUNGSNACHWEIS
ESAB AB, Welding Equipment, S--695 81 Laxå, Schweden, bestätigt hiermit in Eigenverantwortung,
daß die Schweißstromquelle LAF 1600 ab Seriennummer 606 dem Standard EN 60974--1 gemäß
den Bedingungen der Direktive (73/23/EEG) mit Zusats (93/68/EEG) und dem Standard EN
60974--10 gemäß den Bedingungen der Direktive (89/336/EEG) mit Zusatz (93/68/EEG) entspricht.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------CERTIFICAT DE CONFORMITÉ
ESAB AB, Welding Equipment, S--695 81 Laxå Suède, certifie que la source de courant de soudage
LAF 1600 à partir du numéro de série 606 est conforme à la norme EN 60974--1 selon les cinditions
de la directive (73/23/CEE) avec additif (93/68/CEE) et à la norme EN 60974--10 selon les conditions
de la directive (89/336/CEE) avec additif (93/68/CEE).
-----------------------------------------------------------------------------------------------------------------------------------------------------------------VERKLARING VAN OVEREENSTEMMING
ESAB AB, Welding Equipment, S--695 81 Laxå, Zweden, verklaart geheel onder eigen verantwoordelijkheid dat lasstroombron LAF 1600 van het serienummer 606 in overeenstemming is met norm EN
60974--1 conform de bepalingen in richtlijn (73/23/EEG) met de annex (93/68/EEG) en met norm EN
60974--10 conform de bespalingen in richtlijn (89/336/EEG) met annex (93/68/EEG).
-----------------------------------------------------------------------------------------------------------------------------------------------------------------DECLARACIÓN DE CONFORMIDAD
ESAB AB, Welding Equipment, S--695 81 Laxå, Suecia, garantiza bajo propia responsabilidad que la
fuente de corriente para soldadura LAF 1600 a partir del número de serie 606 concuerda con la norma EN 60974--1 conforme a la directiva (73/23/CEE) con el suplemento (93/68/CEE) y con la norma
EN 60974--10 según los requisitos de la directiva (89/336/CEE) con el suplemento (93/68/CEE).
-----------------------------------------------------------------------------------------------------------------------------------------------------------------DICHIARAZIONE DI CONFORMITA
ESAB AB, Welding Equipment, S--695 81 Laxå, Svezia, dichiara sotto la propria responsabilità che il
generatore per saldatura LAF 1600 con numero di serie a partire da 606 è conforme alla norma EN
60974--1 come previsto dalla direttiva (73/23/CEE) e successive integrazioni (93/68/CEE) ed alla norma EN 60974--10 come previsto dalla direttiva (89/336/CEE) e successive integrazioni (93/68/CEE).
------------------------------------------------------------------------------------------------------------------------------------------------------------------
3
DECLARAÇÃO DE CONFORMIDADE
ESAB AB, Welding Equipment, S--695 81 Laxå, Suécia, garante sob responsabilidade de própria que
a fonte de corrente para soldadura LAF 1600 a partir do número de série 606 está em conformidade
com a norma EN 60974--1 segundo os requisitos da directiva (73/23/CEE) com o suplemento
(93/68/CEE) e com a norma EN 60974--10 segundo os requisitos da directiva (89/336/CEE) com o
suplemento (93/68/CEE).
-----------------------------------------------------------------------------------------------------------------------------------------------------------------ÄÇËÙÓÇ ÓÕÌÌÏÑÖÙÓÇÓ
Ç åôáéñåßá ESAB AB, Welding Equipment, 695 81 Laxå, Óïõçäßá, äçëþíåé üôé ïé ðçãÝò ñåýìáôïò
óõãêüëëçóçò LAF 1600 áðü ôïí áñéèìü óåéñÜò 606 êáé Ýðåéôá, óõììïñöþíïíôáé ìå ôï ðñüôõðï
EN 60974–1 óýìöùíá ìå ôéò áðáéôÞóåéò ôçò ïäçãßáò (73/23/EEG) êáé ôïõ ðáñáñôÞìáôïò
(93/68/EEG) êáé ôï ðñüôõðï EN 60974--10 óýìöùíá ìå ôéò áðáéôÞóåéò ôçò ïäçãßáò (89/336/EEG)
êáé ôïõ ðáñáñôÞìáôïò (93/68/EEG).
-----------------------------------------------------------------------------------------------------------------------------------------------------------------DEKLARACJA ZGODNO¦CI
Firma ESAB AB, Welding Equipment, 69581 Laxaa, Szwecja, gwarantuje pod rygorem odpowiedzialno¶ci, ¿e
¼ród³a pr±du spawania LAF 1600 od numeru seryjnego 606 spe³niaj± wymagania normy EN60974-1
wed³ug dyrektywy (73/23/EEC) z poprawkami (93/68/EEG) oraz normy EN 60974-10 wed³ug dyrektywy
(89/336/EEG) z poprawkami (93/68/EEG)..
-----------------------------------------------------------------------------------------------------------------------------------------------------------------PROHLÁ©ENÍ O SHODÌ
Spoleènost Esab Welding Equipment AB, S-69581 Laxa, ©védsko, vydává nevyhrazenou záruku, ¾e zdroj
svaøovacího proudu LAF 1600 od výrobního èísla 606 splòuje normu EN 60974-1, v souladu s po¾adavky
smìrnice (73/23/EEC) a novelou (93/68/EEC) a normu EN 60974-10 v souladu s po¾adavky smìrnice
(89/336/EEC) a novely (93/68/EEC).
-----------------------------------------------------------------------------------------------------------------------------------------------------------------ATITIKTIES DEKLARACIJA
ESAB AB, Welding Equipment, S-695 81 Laxå, Sweden (Švedija), užtikrina, kad suvirinimo maitinimo
šaltiniai LAF 1600 nuo serijinio numerio 606 atitinka EN 60974-1 standartą pagal direktyvos
(73/23/EEC) ir priedo (93/68/EEC) reikalavimus ir EN 60974-10 standartą pagal direktyvos
(89/336/EEC) ir priedo (93/68/EEC) reikalavimus.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------Laxå 2006--04--19
Kent Eimbrodt
Global Director
ESAB AB, Welding Equipment
SE--695 81 LAXÅ
SWEDEN
Tel: + 46 584 81000
4
Fax: + 46 584 411721
ENGLISH
1 SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
2 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
2.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
40
40
3 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
3.1
3.2
3.3
3.4
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Unpacking and erection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PC board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
41
41
41
42
4 OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
4.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3 Start--up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
43
43
43
5 MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
5.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
44
44
6 ORDERING OF SPARE PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LIST OF COMPONENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CONNECTION INSTRUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SPARE PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
44
132
133
134
135
TOCe
-- 37 --
GB
1
SAFETY
Users of ESAB welding equipment have the ultimate responsibility for ensuring that anyone who
works on or near the equipment observes all the relevant safety precautions. Safety precautions
must meet the requirements that apply to this type of welding equipment. The following recommendations should be observed in addition to the standard regulations that apply to the workplace.
All work must be carried out by trained personnel well--acquainted with the operation of the welding
equipment. Incorrect operation of the equipment may lead to hazardous situations which can result
in injury to the operator and damage to the equipment.
1.
Anyone who uses the welding equipment must be familiar with:
S its operation
S location of emergency stops
S its function
S relevant safety precautions
S welding
2.
The operator must ensure that:
S no unauthorised person is stationed within the working area of the equipment when it is
started up.
S no--one is unprotected when the arc is struck
3.
The workplace must:
S be suitable for the purpose
S be free from draughts
4.
Personal safety equipment
S Always wear recommended personal safety equipment, such as safety glasses, flame--proof
clothing, safety gloves.
S Do not wear loose--fitting items, such as scarves, bracelets, rings, etc., which could become
trapped or cause burns.
5.
General precautions
S Make sure the return cable is connected securely.
S Work on high voltage equipment may only be carried out by a qualified electrician.
S Appropriate fire extinquishing equipment must be clearly marked and close at hand.
S Lubrication and maintenance must not be carried out on the equipment during operation.
SafE
-- 38 --
GB
WARNING
ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAUTIONS WHEN WELDING. ASK FOR YOUR EMPLOYER’S SAFETY PRACTICES WHICH SHOULD BE
BASED ON MANUFACTURERS’ HAZARD DATA.
ELECTRIC SHOCK -- Can kill
S
Install and earth the welding unit in accordance with applicable standards.
S
Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S
Insulate yourself from earth and the workpiece.
S
Ensure your working stance is safe.
FUMES AND GASES -- Can be dangerous to health
S
Keep your head out of the fumes.
S
Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
and the general area.
ARC RAYS -- Can injure eyes and burn skin.
S
Protect your eyes and body. Use the correct welding screen and filter lens and wear protective
clothing.
S
Protect bystanders with suitable screens or curtains.
FIRE HAZARD
S
Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
NOISE -- Excessive noise can damage hearing
S
Protect your ears. Use earmuffs or other hearing protection.
S
Warn bystanders of the risk.
MALFUNCTION -- Call for expert assistance in the event of malfunction.
READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.
PROTECT YOURSELF AND OTHERS!
WARNING
This product is intended for industrial use. In a domestic environment this
product may cause radio interference. It is the user’s responsibility to take
adequate precautions.
WARNING!
Read and understand the instruction manual
before installing or operating.
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human health!
SafE
-- 39 --
GB
2
INTRODUCTION
2.1
General
LAF 1600 is a remote--controlled 3--phase welding power source designed for
high--efficiency mechanical gas metal arc welding (MIG/MAG) or sub arc welding
(SAW). It is always to be used in combination with ESAB‘s control box
A2--A6 Process Controller (PEH).
LAF is fan--cooled and monitored by a thermal overload protection.
When the protection enters into action a yellow indicating lamp on the front panel
goes on and is reset automatically as soon as the temperature has gone down to an
acceptable level.
The welding power source and the control unit are linked together over a 2--wire bus
enabling precision control of the welding process.
All welding parameter settings for the power source can be made by the operator on
the front panel of the control unit.
The operation of the power source is completely controlled and monitored by this
unit. Even the start and stop qualities can be set by way of the control unit. The
preset welding current parameters can also be monitored in the course of welding.
For more detailed information regarding the settings and the working mode of the
welding power source, please refer to the instruction manual for the
A2--A6 Process Controller.
2.2
Technical data
LAF 1600
Voltage
Permissible load at:
100 % duty cycle
400/415/500 V, 3μ50 Hz
400/440/550 V, 3μ60 Hz
1600 A/ 44 V
Setting range
SAW
40 A/ 22 V --1600 A/ 46 V
No--load voltage
54 V
No--load power
220 W
Effiency
0,86
Power factor
0,87
Weight
585 kg
Dimensions L x W x H
774 x 598 x 1430
Class of enclosure
Class of application
IP 23
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP 23 is designed for indoor and outdoor use.
Application class
The symbol
indicates that the power source is designed for use in areas with increased
electrical hazard.
fja3d1ea
-- 40 --
GB
3
INSTALLATION
3.1
General
The installation must be executed by a professional.
3.2
Unpacking and erection
WARNING - TIPPING RISK!
Fasten the equipment -- particularly if the ground is uneven or sloping.
S
Place the welding power source on a level foundation.
S
Make sure there is nothing to prevent the cooling.
Lifting instructions
3.3
Connections
S
On delivery the welding power source is
connected for 400 V. For other supply voltage,
switch over to the desired voltage on the main
transformer and the control transformer according
to the connection instructions on page 134.
S
Make sure the mains cable has the right sectional
area and fuse it with an adequate fuse according to
applicable local directions (see table on page 42).
S
Connect the earth cable to the screw marked
S
Tighten the cable support (1).
S
Connect the mains cable to the main terminal
blocks L1, L2 and L3.
S
Connect the control cable between the LAF
welding power source and the control unit to the
28--pole contact (2) inside the welding power source.
S
Connect 1 pin socket measure cable (4).
S
Connect a suitable welding and return cable to the contacts (3) marked + and -on the front of the power source.
fja3i1ea
-- 41 --
.
GB
Mains connection
LAF 1600
50 Hz
60 Hz
Voltage
400 V / 415 V
500 V
400 V / 440 V
550 V
Current:
100%
136 A
108 A
136 A
108 A
Cable area
3 x 70+35 mm2
3 x 50+35 mm2
3x70+ 35 mm2
3x70+ 35 mm2
Fuse, slow
160 A
125 A
160 A
125 A
3.4
PC board
DIP switches
The PC board (AP1) has two DIP switches (SW1 and SW2) which are preset on
delivery. The settings are not to be changed.
When spare parts are supplied the settings of the DIP switches must be checked
(and set, if necessary) before fitting the PC board into the welding power source.
S
DIP switch SW1
To make the communication with the
A2--A6 Process Controller (PEH) work
DIP switch 1 (SW1) must be set.
S
DIP switch SW2
DIP switch 2 (SW2) must be set in order to
inform the A2--A6 process controller (PEH)
about the rating of the power source that
is connected.
Setting of DIP switch SW1
S
Set pole 6 to “OFF“ position and
all other poles to “ON“.
Setting of DIP switch SW2
S
Set pole 1 and 2 to “OFF” position and all
other poles to “ON”.
Welding power source program
The welding power source program is
stored in the flash memory IC 6.
The capsule is fitted in a holder and is replaceable.
fja3i1ea
-- 42 --
GB
4
OPERATION
4.1
General
General safety regulations for the handling of the equipment can be found on
page 38. Read through before you start using the equipment!
4.2
Controls
The front panel contains:
1. Main switch, breaking the incoming mains voltage for the welding power source.
2. Indicating lamp (white), showing that the main switch is activated.
3. Indicating lamp (yellow), showing that the thermal protection has entered into
action due to overheating in the transformer. The lamp is reset when the
temperature has gone down to an acceptable level.
4. Pushbutton, for the resetting of automatic fuse FU2 for 42 V supply voltage.
4.3
Start--up
S
Connect the return cable to the work piece.
S
Set the main switch (1) to position “I“.
The white indicating lamp (2) goes on and the fan starts.
S
Set the welding parameters and start welding by way of the control box
(see instruction manual 0443 745 xxx for A2--A6 Process Controller).
fja3o1ea
-- 43 --
GB
5
MAINTENANCE
5.1
General
Note:
All warranty undertakings given by the supplier cease to apply if the customer
attempts to rectify any faults on the machine during the warranty period.
5.2
S
Cleaning
Clean the welding power source as necessary.
Dry compressed air is recommended for the purpose.
WARNING!
Blocked air inlets or outlets will lead to overheating.
6
ORDERING OF SPARE PARTS
LAF 1600 DC is designed and tested in accordance with the international and European standards IEC/EN 60974--1 and IEC/EN 60974--10.
It is the obligation of the service unit which has carried out the service or repair work
to make sure that the product still conforms to the said standard.
Spare parts are ordered through your nearest ESAB representative, see back cover.
When ordering spare parts, please state machine type and number as well as designation and spare part number as shown in the spare parts list on page 135.
This will simplify dispatch and ensure you get the right part.
fja3m1ea
-- 44 --
ESAB subsidiaries and representative offices
Europe
AUSTRIA
ESAB Ges.m.b.H
Vienna--Liesing
Tel: +43 1 888 25 11
Fax: +43 1 888 25 11 85
BELGIUM
S.A. ESAB N.V.
Brussels
Tel: +32 2 745 11 00
Fax: +32 2 745 11 28
THE CZECH REPUBLIC
ESAB VAMBERK s.r.o.
Prague
Tel: +420 2 819 40 885
Fax: +420 2 819 40 120
DENMARK
Aktieselskabet ESAB
Herlev
Tel: +45 36 30 01 11
Fax: +45 36 30 40 03
FINLAND
ESAB Oy
Helsinki
Tel: +358 9 547 761
Fax: +358 9 547 77 71
FRANCE
ESAB France S.A.
Cergy Pontoise
Tel: +33 1 30 75 55 00
Fax: +33 1 30 75 55 24
GERMANY
ESAB GmbH
Solingen
Tel: +49 212 298 0
Fax: +49 212 298 218
GREAT BRITAIN
ESAB Group (UK) Ltd
Waltham Cross
Tel: +44 1992 76 85 15
Fax: +44 1992 71 58 03
ESAB Automation Ltd
Andover
Tel: +44 1264 33 22 33
Fax: +44 1264 33 20 74
HUNGARY
ESAB Kft
Budapest
Tel: +36 1 20 44 182
Fax: +36 1 20 44 186
ITALY
ESAB Saldatura S.p.A.
Mesero (Mi)
Tel: +39 02 97 96 81
Fax: +39 02 97 28 91 81
THE NETHERLANDS
ESAB Nederland B.V.
Utrecht
Tel: +31 30 2485 377
Fax: +31 30 2485 260
NORWAY
AS ESAB
Larvik
Tel: +47 33 12 10 00
Fax: +47 33 11 52 03
POLAND
ESAB Sp.zo.o.
Katowice
Tel: +48 32 351 11 00
Fax: +48 32 351 11 20
PORTUGAL
ESAB Lda
Lisbon
Tel: +351 8 310 960
Fax: +351 1 859 1277
SLOVAKIA
ESAB Slovakia s.r.o.
Bratislava
Tel: +421 7 44 88 24 26
Fax: +421 7 44 88 87 41
SPAIN
ESAB Ibérica S.A.
Alcalá de Henares (MADRID)
Tel: +34 91 878 3600
Fax: +34 91 802 3461
SWEDEN
ESAB Sverige AB
Gothenburg
Tel: +46 31 50 95 00
Fax: +46 31 50 92 22
ESAB international AB
Gothenburg
Tel: +46 31 50 90 00
Fax: +46 31 50 93 60
SWITZERLAND
ESAB AG
Dietikon
Tel: +41 1 741 25 25
Fax: +41 1 740 30 55
North and South America
ARGENTINA
CONARCO
Buenos Aires
Tel: +54 11 4 753 4039
Fax: +54 11 4 753 6313
Asia/Pacific
CHINA
Shanghai ESAB A/P
Shanghai
Tel: +86 21 5308 9922
Fax: +86 21 6566 6622
INDIA
ESAB India Ltd
Calcutta
Tel: +91 33 478 45 17
Fax: +91 33 468 18 80
INDONESIA
P.T. ESABindo Pratama
Jakarta
Tel: +62 21 460 0188
Fax: +62 21 461 2929
JAPAN
ESAB Japan
Tokyo
Tel: +81 3 5296 7371
Fax: +81 3 5296 8080
MALAYSIA
ESAB (Malaysia) Snd Bhd
Selangor
Tel: +60 3 8027 9869
Fax: +60 3 8027 4754
SINGAPORE
ESAB Asia/Pacific Pte Ltd
Singapore
Tel: +65 6861 43 22
Fax: +65 6861 31 95
Representative offices
BULGARIA
ESAB Representative Office
Sofia
Tel/Fax: +359 2 974 42 88
EGYPT
ESAB Egypt
Dokki--Cairo
Tel: +20 2 390 96 69
Fax: +20 2 393 32 13
ROMANIA
ESAB Representative Office
Bucharest
Tel/Fax: +40 1 322 36 74
RUSSIA
LLC ESAB
Moscow
Tel: +7 095 543 9281
Fax: +7 095 543 9280
LLC ESAB
St Petersburg
Tel: +7 812 336 7080
Fax: +7 812 336 7060
Distributors
For addresses and phone
numbers to our distributors in
other countries, please visit our
home page
www.esab.com
SOUTH KOREA
ESAB SeAH Corporation
Kyungnam
Tel: +82 55 269 8170
Fax: +82 55 289 8864
UNITED ARAB EMIRATES
ESAB Middle East FZE
Dubai
Tel: +971 4 887 21 11
Fax: +971 4 887 22 63
BRAZIL
ESAB S.A.
Contagem--MG
Tel: +55 31 2191 4333
Fax: +55 31 2191 4440
CANADA
ESAB Group Canada Inc.
Missisauga, Ontario
Tel: +1 905 670 02 20
Fax: +1 905 670 48 79
MEXICO
ESAB Mexico S.A.
Monterrey
Tel: +52 8 350 5959
Fax: +52 8 350 7554
USA
ESAB Welding & Cutting Products
Florence, SC
Tel: +1 843 669 44 11
Fax: +1 843 664 57 48
ESAB AB
SE-- 695 81 LAXÅ
SWEDEN
Phone +46 584 81 000
www.esab.com
060517