Maintenance & Operating
Instructions
For
Dixon Bayco
5204K9 API Valve Sight Glass
Delete Kit
For Sales and Service Contact
USA:
Canada:
Dixon Bayco USA
Chestertown, Maryland
Phone: 410-778-2000
Fax: 410-778-4702
Toll Free: 800-355-1991
E-mail: [email protected]
Dixon Group Canada Limited
Innisfil (Barrie), Ontario
Phone: 705-436-1125
Fax: 705-436-6251
Toll Free: 877-963-4966
E-mail: [email protected]
Europe:
Asia Pacific:
Dixon Group Europe Ltd
Preston, England
Phone: +44 (0)1772 323529
Fax: +44 (0)1772 314664
E-mail: [email protected]
Dixon (Asia Pacific) Pty Ltd Wingfield,
South Australia
Phone: +61 8 8202 6000
Fax: +61 8 8202 6099
E-mail: [email protected]
Mexico:
Dixva, S. de R.L. de C.V.
Monterrey, N.L
Phone: 01-800-00-DIXON (34966)
Fax: 01-81-8354-8197
E-mail: [email protected]
dixonvalve.com
5204K9 API Valve Sight Glass Delete Kit
These instructions are provided to ensure proper installation,
operation and long service life of Dixon Bayco 5204K9 API Sight
Glass Delete Kit. This kit is intended for use with Dixon Bayco 5204
API valves fitted with the combination fluid level and flow indicating
sight glass. This kit includes a plate and gasket that are designed to
seal the existing sight glass holes and to allow the API valve to
operate without the sight glass.
Installation
THE COMBINATION FLUID LEVEL AND FLOW INDICATING
SIGHT GLASS IS EXPOSED TO DISCHARGE (WET) LINE
PRESSURE, REMOVAL OF THE SIGHT GLASS WILL RESULT IN
SPILLAGE UNLESS THE INTERNAL VALVE IS SECURED SHUT
AND THE DISCHARGE (WET) LINE DRAINED PRIOR TO
REMOVAL.
1. Ensure that the discharge line is isolated and drained before
attempting to remove the combination fluid level and flow indicating
sight glass.
THE FLUID LEVEL AND FLOW INDICATORS ARE LOOSE PIECES
AND ARE EASILY LOST. CARE SHOULD BE TAKEN DURING
REMOVAL TO ENSURE THAT THESE PARTS ARE SECURED
BEFORE REMOVING THE SIGHT GLASS.
2. Undo, remove and retain the six fasteners, flat washers and lock
washers (note that only the four corner fasteners include flat
washers, two additional flat washers are included in your kit).
3. Remove the sight glass, level and flow indicators and O-ring.
These may be retained for future use, if serviceable.
4. Ensure that the sealing surface of the sight glass pad on the
5204API valve body is free from debris, scratching or anything that
may result in leakage.
5. Take the fasteners that you removed from the sight glass and the
two flat washers included in your kit and ensure that you have six
screws, flat washers and lock washers, one for each of the holes in
the plate.
6. Match the gasket up to the plate and line the plate and gasket up
to the holes on the sight glass pad. Retain the plate and gasket with
the fasteners.
2
090092 REV 3
5204K9
5204 K9 API Valve Sight Glass Delete Kit
Dixon Bayco Warranty
For complete warranty information, please refer to the latest
Dixon catalog.
5204K9
090092 REV 3
3
">
