HOW TO Shorten Cordless Blinds

The following lists the maximum amount of slats that may be removed .

Removing more than noted will result in failure of your cordless blinds

Item

1-in. Mini Blinds

2-in. Faux Wood Blinds

2-1/2-in. Faux Wood Blinds

Original Length of Blinds

42-in.

64-in.

42-in.

72-in.

42-in.

72-in.

Maximum Q’ty of Slats

Can be taken off

12

20

8

11

6

8

[ IMPORTANT NOTICE ] Altering blinds will void warranty

Close

blind in the

brackets, then lower the blind fully and rotate the slats to open position.

Measure the desired length and make a mark on the last slat.

42”

42”

(Example)

The desired blind length is 42”

Open

push pin and insert it into one of the spring box holes to lock the spring tension,

keep in place until you complete the last step. Ensure the spring tension is

securely fixed.

x1

W hole Space Ind. Ltd.

1

3 Using a flat head screwdriver, remove the bottom -rail buttons.

x1

4 Carefully cut the slats through the holes (including the marked slat) to remove the slats from the blind.Then cut ONLY the outer ladder string.

(Do NOT to cut the inner cord, or the blind will be broken)

Leaving two ladders, one to insert the bottom rail and one to tuck inside the hole.

Ladder

DO NOT CUT

Inner Cord

5 With the one empty ladder, twist the ladder string and insert into the bottom-rail hole and replace the buttons.

6 Ensure the bottom-rail buttons are secured. Remove the pin from the spring box.

The blind is now shortened to your desired length and can be reinstalled into the brackets.

42”

W hole Space Ind. Ltd.

2