Pentax K-x Operating Manual
Annons
Annons
HOYA CORPORATION
PENTAX Imaging Systems Division
2-36-9, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.jp)
PENTAX Europe GmbH
(European Headquarters)
Julius-Vosseler-Strasse 104, 22527 Hamburg,
GERMANY
(HQ - http://www.pentaxeurope.com)
(Germany - http://www.pentax.de)
PENTAX U.K. Limited PENTAX House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.pentax.co.uk)
PENTAX France S.A.S.
112 Quai de Bezons, B.P. 204, 95106 Argenteuil Cedex,
FRANCE
(http://www.pentax.fr)
PENTAX Imaging Company
A Division of PENTAX of America, Inc.
(Headquarters)
600 12th Street, Suite 300 Golden, Colorado 80401,
U.S.A.
(PENTAX Service Department)
12061 Tejon St. STE 600 Westminster, Colorado 80234,
U.S.A. (http://www.pentaximaging.com)
PENTAX Canada Inc.
1770 Argentia Road Mississauga, Ontario L5N 3S7,
CANADA (http://www.pentax.ca)
PENTAX Trading
(SHANGHAI) Limited
23D, Jun Yao International Plaza, 789 Zhaojiabang Road,
Xu Hui District, Shanghai, 200032 CHINA
(http://www.pentax.com.cn) http://www.pentax.jp/english
• Specifications and external dimensions are subject to change without notice.
53546 Copyright © HOYA CORPORATION 2008
H01-200909 Printed in Philippines
SLR Digital Camera
Operating Manual
For optimum camera performance, please read the Operating
Manual before using the camera.
Thank you for purchasing this PENTAX a Digital Camera. Please read this manual before using the camera in order to get the most out of all the features and functions.
Keep this manual safe, as it can be a valuable tool in helping you to understand all the camera’s capabilities.
Lenses you can use
In general, lenses that can be used with this camera are DA, DA L, D FA and FA J lenses and lenses that have an Aperture s (Auto) position. To use any other lens or
accessory, see p.48 and p.282.
Regarding copyrights
Images taken using the a that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright
Act. Please take care, as there are cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display. Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also.
Regarding trademarks
PENTAX, a and smc PENTAX are trademarks of HOYA CORPORATION.
PENTAX Digital Camera Utility and SDM are trademarks of HOYA CORPORATION.
SDHC logo is a trademark.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the
United States and other countries. Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
SDHC logo is a trademark.
This product includes DNG technology under license by Adobe Systems Incorporated.
The DNG logo is either registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
All other brands or product names are trademarks or registered trademarks of their respective companies.
This product supports PRINT Image Matching III. PRINT Image Matching enabled digital still cameras, printers and software help photographers to produce image more faithful to their intentions. Some functions are not available on printers that are not
PRINT Image Matching III compliant.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved.
PRINT Image Matching is a trademark of Seiko Epson Corporation.
The PRINT Image Matching logo is a trademark of Seiko Epson Corporation.
To users of this camera
• Do not use or store this device in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the monitor, damage the stored data, or affect the product's internal circuitry and cause camera misoperation.
• The liquid crystal panel used in the monitor is manufactured using extremely high precision technology. Although the level of functioning pixels is 99.99% or better, you should be aware that 0.01% or fewer of the pixels may not illuminate or may illuminate when they should not. However, this has no effect on the recorded image.
• There is a possibility that the illustrations and the display screen of the monitor in this manual are different from the actual product.
1
For Using Your Camera Safely
We have paid close attention to the safety of this product. When using this product, we request your special attention regarding items marked with the following symbols.
Warning
Caution
This symbol indicates that violating this item could cause serious personal injuries.
This symbol indicates that violating this item could cause minor or medium personal injuries, or loss of property.
About the Camera
Warning
• Do not disassemble or modify the camera. High voltage areas are present inside the camera, with the risk of electric shock.
• If the camera interior is exposed due to dropping or otherwise damaging the camera, never touch the exposed portion. There is a risk of electric shock.
• Wrapping the strap around your neck is dangerous. Take care that small children do not hang the strap around their necks.
• Do not look directly at the sun through the camera with a telephoto lens attached, as viewing the sun may damage your eyes. Viewing the sun directly with a telephoto lens may lead to a loss of eyesight.
• If any irregularities occur during use, such as smoke or a strange odor, stop use immediately, remove the batteries or the AC adapter, and contact your nearest
PENTAX Service Center. Continuing to use the product can cause a fire or electric shock.
• Do not place your finger over the flash when discharging the flash. You may burn yourself.
• Do not cover the flash with clothing when discharging the flash. Discoloration may occur.
2
• Some portions of the camera heat up during use. There is a risk of low temperature burns when holding such portions for long periods.
• Should the monitor be damaged, be careful of glass fragments. Also, be careful not to allow the liquid crystal to get on your skin or in your eyes or mouth.
• Depending on your individual factors or physical condition, the use of the camera may cause itching, rashes or blisters. In case of any abnormality, stop using the camera and get medical attention immediately.
About Battery Usage
Warning
• If any leakage from the batteries should come in contact with your eyes, do not rub them. Flush your eyes with clean water and get medical attention immediately.
Caution
• This camera uses four AA alkaline, AA lithium or AA Ni-MH batteries. Do not use batteries other than those specified here. Using other types of batteries may cause the camera to function poorly, or the batteries may explode or cause a fire.
• AA alkaline and AA lithium batteries cannot be recharged. Do not disassemble the batteries. Attempting to charge non-rechargeable batteries or disassembling the batteries could result in explosion or leakage.
• The batteries should be inserted correctly, observing (+) and (-) marks on the batteries and the camera. Inserting the batteries incorrectly may cause an explosion or fire.
• When replacing the batteries, do not combine different brands, types or capacities.
Also, do not combine old batteries with new ones. Doing so may cause the batteries to explode or cause a fire.
• Do not short the batteries or dispose of the batteries in fire. Do not disassemble the batteries. The batteries could explode or catch fire.
• Do not charge any batteries other than rechargeable Ni-MH batteries. The batteries could explode or catch fire. Batteries for use with this camera other than Ni-MH batteries cannot be charged.
• If any leakage from the batteries should come in contact with skin or clothes, it may cause irritation to the skin. Wash the affected areas thoroughly with water.
• Remove the batteries from the camera immediately if they become hot or begin to smoke. Be careful not to burn yourself during removal.
About the SD Memory Card
Warning
• To avoid the risk of SD Memory Cards from being swallowed by mistake, keep them out of the reach of small children. Seek medical attention immediately if an SD
Memory Card is accidentally swallowed.
About the AC Adapter
Warning
• Always use the AC adapter exclusively developed for this product, with the specified power and voltage. Using an AC adapter not exclusive to this product, or using the exclusive AC adapter with an unspecified power or voltage can cause a fire, electric shock, or camera breakdown.
Caution
• Do not place or drop heavy objects on or forcefully bend the AC plug cord. Doing so may damage the cord. Should the AC plug cord be damaged, consult a PENTAX
Service Center.
• Do not touch or short-circuit the terminal area of the AC plug cord while the cord is plugged in.
• Do not plug or unplug the power cord with wet hands. This can cause an electric shock.
• Do not drop the product, or subject it to violent impact. This can cause equipment breakdown.
• To reduce the risk of hazards, use only a CSA/UL certified power supply cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end with a moldedon male attachment plug cap (with a specified NEMA configuration), and the other is provided with a molded-on female connector body (with a specified IEC nonindustrial type configuration) or the equivalent.
3
Care to be Taken During Handling
Before Using Your Camera
• When traveling, take the Worldwide Service Network listing that is included in the package. This will be useful if you experience problems abroad.
• When the camera has not been used for a long time, confirm that it is still working properly, particularly prior to taking important pictures (such as at a wedding or during traveling). Contents of the recording cannot be guaranteed if recording, playback or transferring your data to a computer, etc. is not possible due to a malfunction of your camera or recording media (SD Memory Card), etc.
Precautions on Carrying and Using Your Camera
• Do not subject the camera to high temperatures or high humidity. Do not leave the camera in a vehicle, as the temperature can get very high.
• Do not subject the camera to strong vibrations, shocks, or pressure. Use a cushion to protect the camera from vibrations of motorcycles, automobiles, or ships.
• The temperature range for camera use is 0°C to 40°C (32°F to 104°F).
• The monitor may appear black at high temperatures, but will return to normal at normal temperatures.
4
• The monitor may respond more slowly at low temperatures. This is due to liquid crystal properties, and is not a malfunction.
• Sudden temperature changes will cause condensation on the inside and outside of the camera. Place the camera in your bag or a plastic bag, and remove the camera after temperature of the camera and surroundings are equalized.
• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salts. These could cause the camera to breakdown. Wipe dry any rain or water drops on the camera.
• Please do not press forcefully on the monitor. This could cause it to break or malfunction.
• Be careful not to overtighten the screw in the tripod socket when using a tripod.
Cleaning Your Camera
• Do not clean the product with organic solvents such as thinner, alcohol, or benzene.
This may cause color fading or discoloration.
• Use a lens brush to remove dust accumulated on the lens or viewfinder. Never use a spray blower for cleaning as it may damage the lens.
• Please contact a PENTAX Service Center for professional cleaning of the CMOS sensor. (This will involve a fee.)
Storing Your Camera
• Do not store the camera with preservatives or chemicals. Storage in high temperatures and high humidity can cause mold to grow on the camera. Remove the camera from its case and store it in a dry and well-ventilated place.
Other Precautions
• Periodic inspections are recommended every one to two years to maintain high performance.
• Refer to “Precautions When Using the SD Memory Card” (p.45) regarding the SD
Memory Card.
• Please note that deleting the data recorded on an SD Memory Card or formatting an
SD Memory Card using a camera or computer will not necessarily delete the data so that they cannot be recovered using off-the-shelf data recovery software. Such data should be handled and managed at your own risk.
Regarding Product Registration
In order to better serve you, we request that you complete the product registration, which can be found on the CD-ROM supplied with the camera or on the PENTAX
website. Refer to p.273 for details. Thank you for your cooperation.
Contents
For Using Your Camera Safely ............................................................ 1
Care to be Taken During Handling ...................................................... 3
Composition of the Operating Manual ............................................... 11
Before Using Your Camera 13
a Camera Characteristics.....................................................14
Checking the Contents of the Package ......................................16
Names and Functions of Working Parts ....................................17
Capture Mode .................................................................................... 18
Playback Mode .................................................................................. 20
Display Indicators.........................................................................22
How to Change Function Settings ..............................................32
Using the Direct Keys ........................................................................ 32
Using the Control Panel ..................................................................... 33
Using the Menus ................................................................................ 35
Getting Started 37
Attaching the Strap ......................................................................38
Inserting the Batteries..................................................................39
Battery Level Indicator ....................................................................... 40
Approximate Image Storage Capacity and Playback Time (New
Using the AC Adapter (Optional) ....................................................... 42
Inserting/Removing the SD Memory Card..................................44
Recorded Pixels and Quality Level .................................................... 46
Attaching the Lens .......................................................................48
Adjusting the Viewfinder Diopter................................................50
Turning the Camera On and Off ..................................................51
Initial Settings ...............................................................................52
Setting the Display Language ............................................................ 52
Setting the Date and Time ................................................................. 56
5
6
Basic Operations 59
Basic Shooting Operation ...........................................................60
Holding the Camera ........................................................................... 60
Letting the Camera Choose the Optimal Settings.............................. 61
Using a Zoom Lens ......................................................................66
Using the Built-in Flash ...............................................................67
Setting the Flash Mode ...................................................................... 67
Compensating Flash Output .............................................................. 72
Allowing Shooting while Charging the Flash...................................... 73
Playing Back Pictures ..................................................................74
Playing Back Images ......................................................................... 74
Deleting a Single Image..................................................................... 75
Shooting Functions 77
How to Operate the Shooting Functions....................................78
Direct Keys Setting Items................................................................... 78
Rec. Mode Menu Setting Items.......................................................... 79
Custom Setting Menu Setting Items .................................................. 81
Selecting the Appropriate Capture Mode...................................83
H Mode........................................................................................... 85
Exposure Mode.................................................................................. 87
Setting the Exposure....................................................................88
Effect of Aperture and Shutter Speed ................................................ 88
Setting the Sensitivity......................................................................... 90
Changing the Exposure Mode ........................................................... 93
Selecting the Metering Method ........................................................ 104
Adjusting the Exposure .................................................................... 107
Focusing......................................................................................112
Using the Autofocus......................................................................... 112
Setting the AF Mode ........................................................................ 115
Selecting the Focusing Area (AF Point)........................................... 117
Locking the Focus (Focus Lock) ...................................................... 119
Adjusting the Focus Manually (Manual Focus) ................................ 121
Checking the Composition, Exposure and Focus Before
Shooting (Preview) .....................................................................124
Assigning the Preview Function to the Green Button ...................... 124
Displaying the Optical Preview ........................................................ 126
Displaying the Digital Preview.......................................................... 127
Using Shake Reduction Function to Prevent Camera
Shake ...........................................................................................128
Taking Pictures Using the Shake Reduction Function..................... 128
Shooting with the Self-timer ............................................................. 131
Shooting with the Remote Control (Optional) .................................. 134
Taking Pictures Continuously...................................................136
Continuous Shooting........................................................................ 136
Multi-exposure ................................................................................. 138
Taking Pictures Using Digital Filters ........................................140
Shooting with the Live View ......................................................143
Taking Still Pictures ......................................................................... 144
Recording Movies ............................................................................ 148
Using the Flash 155
Flash Characteristics in Each Exposure Mode........................156
Using the Slow-speed Sync ............................................................. 156
Using the Trailing Curtain Sync ....................................................... 158
Distance and Aperture when Using the Built-in Flash............160
Lens Compatibility with the Built-in Flash ...............................161
Using an External Flash (Optional)...........................................162
Using P-TTL Auto Mode .................................................................. 163
Using High-Speed Flash Sync Mode ............................................... 164
Using Flash in Wireless Mode ......................................................... 165
Red-Eye Reduction.......................................................................... 168
Trailing Curtain Sync........................................................................ 169
Connecting an External Flash with an Extension Cord.................... 169
Multiple Flash Shooting Using Extension Cords .............................. 170
Contrast-Control-Sync Flash............................................................ 171
Shooting Settings 173
Setting the File Format...............................................................174
Setting the JPEG Recorded Pixels .................................................. 174
Setting the JPEG Quality Level........................................................ 175
Setting the File Format..................................................................... 177
Setting the Green Button Function...........................................179
Setting the White Balance .........................................................182
Adjusting the White Balance Manually............................................. 184
Fine-Tuning the White Balance........................................................ 186
Setting the Color Space ................................................................... 187
Correcting Images ......................................................................189
Adjusting the Brightness .................................................................. 189
Lens Correction................................................................................ 192
Setting the Image Finishing Tone .............................................194
Setting Custom Image ..................................................................... 194
Setting Cross Processing................................................................. 196
7
8
Playback Functions 199
Playback Functions Operation..................................................200
Playback Mode Palette Setting Items .............................................. 200
Playback Menu Setting Items .......................................................... 201
Enlarging Images........................................................................202
Displaying Multiple Images .......................................................204
Multi-image Display Screen ............................................................. 204
Displaying Images by Folder............................................................ 205
Displaying Images by Shooting Date (Calendar Display) ................ 206
Joining Multiple Images (Index) ....................................................... 207
Slideshow....................................................................................210
Setting the Slideshow Display.......................................................... 210
Starting the Slideshow ..................................................................... 211
Rotating Images..........................................................................213
Comparing Images .....................................................................214
Deleting Multiple Images ...........................................................215
Deleting Selected Images ................................................................ 215
Deleting a Folder.............................................................................. 216
Deleting All Images .......................................................................... 218
Protecting Images from Deletion (Protect) ..............................219
Protecting a Single Image................................................................ 219
Protecting All Images ....................................................................... 220
Connecting the Camera to an AV Device .................................221
Processing Images 223
Changing the Image Size ...........................................................224
Changing the Number of Recorded Pixels and Quality Level
Cutting Out Part of the Image (Cropping) ........................................ 225
Processing Images with Digital Filters.....................................227
Applying the Digital Filter ................................................................. 229
Recreating Filter Effects................................................................... 230
Searching for the Original Image ..................................................... 232
Developing RAW Images ...........................................................233
Developing One RAW Image........................................................... 233
Developing Multiple RAW Images ................................................... 234
Specifying the Parameters............................................................... 236
Readjusting Images Shot in JPEG Format...............................238
Changing Additional Settings 239
How to Operate the Set-up Menu ..............................................240
Set-up Menu Setting Items .............................................................. 240
Formatting an SD Memory Card................................................242
Setting the Beep, Date and Time, and Display Language ......243
Setting the Beep .............................................................................. 243
Changing the Date and Time Display .............................................. 244
Setting the World Time .................................................................... 244
Setting the Display Language .......................................................... 247
Adjusting the Monitor and the Menu Display ..........................248
Setting the Text Size........................................................................ 248
Setting the Guide Display Time ....................................................... 248
Setting the Status Screen Display ................................................... 248
Setting the Display for Instant Review ............................................. 249
Adjusting the Brightness of the Monitor ........................................... 250
Adjusting the Color of the Monitor.................................................... 251
Setting the Folder Name/File Number Naming Convention ...252
Selecting the Folder Name .............................................................. 252
Selecting the File Number Setting ................................................... 252
Selecting the Power Settings ....................................................253
Setting Auto Power Off .................................................................... 253
Setting the Battery Type .................................................................. 253
Setting the Operation of the Power Lamp........................................ 254
Setting the DPOF Settings.........................................................255
Setting the Photographer Information Saved to Exif ..............257
Correcting Defective Pixels in the CMOS Sensor
(Pixel Mapping) ...........................................................................259
Selecting Settings to Save in the Camera (Memory)...............260
Connecting to a Computer 263
Using Captured Images on a Computer ...................................264
Saving Images on Your Computer............................................265
Setting USB Connection Mode ........................................................ 265
Saving Images by Connecting Your Camera and Your Computer ....266
Using the Provided Software.....................................................268
Installing the Software...................................................................... 268
The PENTAX Digital Camera Utility 4 Screen ................................. 270
9
10
Appendix 275
Default Settings ..........................................................................276
Resetting the Menu.......................................................................... 280
Functions Available with Various Lens Combinations...........282
Notes on [22. Using Aperture Ring] ................................................. 284
Cleaning the CMOS Sensor .......................................................285
Removing Dust by Shaking the CMOS Sensor (Dust Removal) ..... 285
Detecting Dust on the CMOS Sensor (Dust Alert) ........................... 286
Removing Dust with a Blower .......................................................... 287
Optional Accessories.................................................................289
Error Messages...........................................................................293
Troubleshooting .........................................................................295
Main Specifications ....................................................................298
Glossary ......................................................................................302
WARRANTY POLICY ..................................................................313
11
Composition of the Operating Manual
This Operating Manual contains the following chapters.
Explains camera characteristics, accessories and the names and functions of various parts.
Explains your first steps from purchasing the camera to taking pictures. Be sure to read it and follow the instructions.
Explains the procedures for taking and playing back pictures.
Explains the shooting-related functions.
Explains how to use the built-in flash and external flashes.
Explains the procedures for configuring image processing and setting the file format.
Explains the procedures for playing back, deleting, and protecting images.
Explains the procedures for changing the image size, using image filters and processing pictures taken in RAW format.
9 Changing Additional Settings
Explains the procedures for changing the camera settings, such as the monitor settings and the image folder naming convention.
Explains how to connect the camera to a computer, and includes installation instructions and a general overview of the provided software.
Explains troubleshooting, introduces optional accessories and provides various resources.
1
2
3
4
5
6
7
8
9
10
11
12
The symbols used in this Operating Manual are explained below.
1 Indicates reference page number explaining a related operation.
Indicates useful information.
Indicates precautions to take when operating the camera.
1
Before Using Your
Camera
Check the package contents and the names and functions of working parts before use.
a Camera Characteristics ............................14
Checking the Contents of the Package .............. 16
Names and Functions of Working Parts ............17
Display Indicators ................................................22
How to Change Function Settings ......................32
14 a
Camera Characteristics
1
• Features a 23.6×15.8 mm CMOS sensor with approximately 12.4 million effective pixels for high precision and a wide dynamic range.
• Features Shake Reduction (SR), an image sensor shifting shake reduction system. This enables you to capture sharp pictures with minimal camera shake regardless of the lens type.
• Features a viewfinder similar to that of a conventional 35 mm camera, with a magnification of approximately 0.85 and field of view of approximately 96%, for easier image composition and manual focusing.
• Features a large 2.7-inch monitor with approximately 230,000 dots, a wide viewing angle and brightness and color adjusting functions for high-precision viewing performance.
• Uses AA lithium batteries, AA Ni-MH rechargeable batteries or AA alkaline batteries.
• Features a Live View function for shooting while viewing the subject in real-time on the monitor.
• Movies can be recorded by taking advantage of the camera lens properties. The camera can also output composite video so that you can view recorded images and movies on a monitor such as a TV screen.
• A user-friendly design has been implemented in various parts of the camera. The large text size, high-contrast monitor and easy-to-use menus make the camera easier to operate.
• The CMOS sensor features a special SP coating to prevent dust sticking to the sensor. The Dust Removal function also shakes the CMOS sensor for removing collected dust.
• Features Digital Filters to internally process the image in the camera.
You can use digital filters such as Star Burst or Soft while taking pictures or to process images after taking them.
• Features Custom Image which allows you to adjust settings while previewing the edited image, enabling a wider range of expression.
• Records in the versatile JPEG format or the high quality and fully editable RAW format. You can also select JPEG+RAW and record in both formats simultaneously. Pictures taken in RAW format can be easily processed internally by the camera.
• Features Sensitivity Priority mode K that automatically adjusts aperture and shutter speed according to the set sensitivity.
15
The captured area (view angle) will differ between the a and 35 mm SLR cameras even if the same lens is used because the format size for 35 mm film and CMOS sensor are different.
Sizes for 35 mm film and CMOS sensor
35 mm film: 36×24 mm a CMOS sensor: 23.6×15.8 mm
Angles of view being equal, the focal length of a lens used with a 35 mm camera must be approximately 1.5 times longer than that of a . To obtain an angle of view framing the same area, divide the focal length of the 35 mm lens by 1.5.
Example) To capture the same image as a 150 mm lens attached to a 35 mm camera
150÷1.5=100
Use a 100 mm lens with the a .
Inversely, multiply the focal length of the lens used with the a by 1.5 to determine the focal length for 35 mm cameras.
Example) If 300 mm lens is used with the a
300×1.5=450
Focal length is equivalent to a 450 mm lens on a 35 mm camera.
Shake Reduction (SR)
Shake Reduction (SR) on the a features a PENTAX original system which uses magnetic force to move the image sensor at high speeds, compensating camera shake.
The camera may generate some operating noise when it is shaken, such as when changing the composition of a picture. This is normal and not a malfunction.
1
16
Checking the Contents of the
Package
The following accessories are packaged with your camera.
Check that all accessories are included.
1
Hot shoe cover F
K
(Installed on camera)
Eyecup F
Q
(Installed on camera)
Body mount cover
(Installed on camera)
USB cable
I-USB7
Strap
O-ST53
Software (CD-ROM)
S-SW99
Four AA lithium batteries Operating Manual
(this manual)
Refer to p.289 for information on optional accessories.
Names and Functions of Working
Parts
Power lamp
Self-timer lamp/
Remote control receiver
Card cover
Lens mount index
(red dot)
Lens unlock button
Built-in flash
MF
AF
17
Hot shoe
Speaker
Strap lug
Microphone
Mirror
AF coupler
Lens information contacts
Diopter adjustment lever
Viewfinder
1
Card access lamp
PC/AV terminal
Terminal cover Monitor
Tripod socket
Battery cover unlock lever
Battery cover
* In the second illustration, the camera is shown with the Eyecup F
Q
removed.
18
1
Capture Mode
Functions of buttons, dials and levers used during shooting are noted.
The factory default settings are explained here. Depending on the button, these settings can be changed.
1
2
3
5
6
MF
AF
4
8
7
9
0 a b c d e f
1 | (Green) button
You can assign a function to
2 Shutter release button
Press to capture images.
3 Main switch
Move to turn the camera on
4 Lens unlock button
Press to detach the lens.
5 m c button
Sets the EV compensation
6 Mode dial
7 Focus mode lever
Switches between autofocus
8 K / i button
Press to pop up the built-in
9 e-dial
Sets the shutter speed, aperture, sensitivity and EV compensation values.
0 = / L button
You can select the function of this button either to focus on the target or to lock the
exposure value. (p.102, p.108,
19 a Q button
Switches to Playback mode.
b U button
Displays the Live View.
c M button
Displays the status screen
Displays the control panel when the status screen is
d 4 button
Displays the screen for setting
When the control panel or a menu screen is displayed, press this button to confirm the selected item.
e Four-way controller
( 2345 )
Opens the Drive Mode/Flash
Mode/White Balance/
Sensitivity setup menu (p.78).
When the control panel or a menu screen is displayed, use this to move the cursor or change items.
f 3 button
Displays the [ A Rec. Mode 1]
four-way controller ( 5 ) to display other menus.
1
20
1
Playback Mode
Functions of buttons, dials and levers used during playback are noted.
3
1
2
MF
AF
4
5
6
7
8
9
0
1 Shutter release button
Press halfway to switch to
Capture mode.
2 Main switch
Move to turn the camera on
3 | (Green) button
Press to change the settings, such as resetting the values.
4 K / i button
Press to delete images. (p.75)
5 e-dial
Use this to enlarge an image
images at the same time
6 Q button
Switches to Capture mode.
21
7 M button
Displays shooting information
8 4 button
Saves the setting you selected in the menu or playback screen.
9 Four-way controller
( 2345 )
Use this to move the cursor or change items in the menu or playback screen.
0 3 button
Displays the [ Q Playback 1]
four-way controller ( 5 ) to display other menus.
1
References to Button Names
In this Operating Manual, the buttons of the fourway controller are referred to in the following way.
22
Display Indicators
1
Monitor
The following indicators appear on the monitor depending on the status of the camera.
Monitor
The brightness and the color of the monitor can be adjusted. (p.250, p.251)
At Start-up or when Operating the Mode Dial
Guides appear on the monitor for 3 seconds (default setting) when the camera is switched on or the mode dial is turned.
To not show indicators, set [Guide Display] to [Off] in the [ R Set-up 1] menu.
1
P Program
Automatic Exposure
P
2
10/10/2009 10:30AM
3
1
2
(only when set to Destination)
3
23
Capture Mode
While shooting, the status screen is displayed showing the current shooting function settings. You can change the screen displayed by pressing the M button.
P
1/ 125
ISO
AUTO
200
-3 2 1 1 2 +3
AF.A
AWB
F
5.6
ISO
JPEG 12 M
[ 37]
Status screen
M
Custom Image
Bright
HDR
OFF
JPEG
AF.A
12
M
10/10/’09 10:30AM [ 37]
Control panel
M
Blank
M
1
Status screen
(All items are displayed here for explanatory purposes. The actual display may differ.)
P
SHIFT
1/ 2000
ISO
AUTO
1600
AWB
AF.A
F 2.8
ISO
-3 2 1
±1.0
JPEG 12
M
1 2 +3
G1A1
[ 37 ]
8
1
11
15
22
2
9
12
3
23
14
16
24
4 5 6 7
8
10
17
18 19 20
21
25 26
1
2
3
Multi-exposure (p.138)/Digital
Filter (p.140)/HDR Capture (p.191)
4
5
6
7
8 E-dial guide
9 Shutter speed
10 Aperture value
11 ISO AUTO
12
13
14 EV bar
15 Flash Exposure Compensation
16
17
18
19
20
21
22
23
24
25
26 Remaining image storage capacity
24
Control panel
Press the M button in the status screen to display the control panel and change settings.
1
Custom Image
Bright
HDR
OFF
JPEG
AF.A
12
M
10/10/’09 10:30AM [ 37 ]
1 Function name
2 Setting
3
4
5
6
7
8
9
10
3
8
13
1
2
4
9
14
18
5
10
15
6
11
16
19
7
12
17
11
12
13
14
15
16
17 Lateral Chromatic Aberration
18 Date and Time
19 Remaining image storage capacity
• Settings that cannot be changed due to the current camera setup cannot be selected.
• The status screen will disappear if no operations are made within 30 seconds.
Press the M button to display it again.
• If no operations are made within 30 seconds in the control panel, the status screen will reappear.
• If [Shooting Info Display] is set to O
(On) in [Memory] (p.260) of the [
A Rec.
Mode 4] menu and the blank screen is selected, the next time the camera is turned on the blank screen is displayed first.
25
Playback Mode
The camera switches the type of information display when you press the
M button during playback.
Standard
Histogram display
Detailed information display
No info. display
Captured image, file format and indicators are displayed.
Captured image and histogram (Brightness/RGB) are displayed. Not available during movie playback.
Detailed information on how and when the image was taken is displayed.
Only captured image is displayed.
1
M
1/ 2000 F5.6
Standard
100-0001
M
No info. display
1/ 2000 F5.6
100-0001
Histogram display
M
M
P
AF.A
24mm
1/
2000
F2.8
ISO
200
JPEG 12
M
+1.5
10/10/’09
-0.5
G2 A1
AdobeRGB
10:00AM 100-0001
± 0
± 0
± 0
± 0
± 0
Detailed information display
The information that is shown first during playback is the same as that of the last playback in the previous session. If [Playback Info Display] is set to P (Off)
A Rec. Mode 4] menu, the [Standard] screen is always displayed first when the camera is turned on.
26
1
Detailed information display
Use the four-way controller ( 23 ) to switch between pages. The copyright information is displayed on page 2.
Page 1
Still Picture
P
AF.A
24mm
1/ 2000
F2.8
ISO
200
JPEG 12
M
10/10/’09
DR
200
+1.5
-0.5
G2 A1
AdobeRGB
10:00AM 100-0001
± 0
± 0
± 0
± 0
± 0
1
10
16
2
20
3
11 12 13 14 15
17
21
18 19
22
23 24 25
29
4
5
7 8
6
9
26
30
27
28
Movie
P
F2.8
10min10sec
MONO G2 A1
+1.5
Movie 1.6
M
3:2
10/10/’09 10:00AM 100-0001
± 0
± 0
± 0
± 0
± 0
2
3
4
32
11
33
12 13
23 24 25
29
21
31
16
22
17
30
27
28
Page 2
Still Picture/Movie
2
3
Photographer
A B C D E F G H I J K L M N O P
Q R S T U V W X Y Z
Copyright Holder
A B C D E F G H I J K L M N O P
Q R S T U V W X Y Z
34
34
2
3
35
35
36
36
27
1
2 Captured image
3
4
5
6
7
8
9 Lens focal length
10 Shutter speed
11
12
13
14
15
16 Aperture value
17
18 Flash Exposure Compensation
19
20
21
22
23
24
Recorded Pixels (p.148, p.174)
25
26
27
28
29
31
Custom Image parameters (p.194)
Shooting date/time
30 Folder number-File number
Recording time
32
33
34 Information tampering warning
35
36
* For images shot with Live View, the autofocus mode is displayed for indicator 6.
* Indicators 7 and 18 appear only for images in which the flash was discharged.
* Indicators 13, 14, 15, 19, and 22 appear only for images taken with the corresponding functions enabled.
* Indicators 24 and 25 do not appear for RAW images.
1
28
1
Histogram Display
The following histograms can be displayed when playing back still pictures. The “Brightness histogram” shows the distribution of brightness and the “RGB histogram” shows the distribution of color intensity. Press the four-way controller ( 23 ) to switch between “Brightness histogram” and “RGB histogram”.
1
23
8
9
11
23
1
2
1/ 2000 F5.6
100-0001
3 4 5 6
Brightness histogram
7 3
1/ 2000 F5.6
100-0001
4 5 6 7
RGB histogram
1 Histogram (Brightness)
2 Switch RGB histogram/ Brightness histogram
3 File Format
4 Shutter speed
5 Aperture value
6 Protect
7 Folder number-File number
8 Histogram (R)
9 Histogram (G)
10
11
Histogram (B)
Switch Brightness histogram/
RGB histogram
* Indicator 6 appears only for images with Protect setting.
10
If [Bright/Dark Area] is set to O (On) in [Playback Display Method] of the [ Q
Playback 1] menu, areas affected by bright or dark portions blink (except when
in RGB histogram display and Detailed information display). (p.203)
29
Using the Histogram
A histogram shows the brightness distribution of an image. The horizontal axis represents brightness (dark at the left and bright at the right) and the vertical axis represents the number of pixels.
The shape and the distribution of the histogram before and after shooting tells you whether the exposure level and contrast are correct or not, and lets you decide if you need to adjust the exposure and take a picture again.
1
Adjusting the Exposure (p.107)
1
Adjusting the Brightness (p.189)
(Dark) ←
Dark portions
Brightness → (Bright)
Bright portions
Understanding Brightness
When the brightness is correct and there are no overly bright or dark areas, the graph peaks in the middle. If the image is too dark, the peak is on the left side, and if it is too bright, the peak is on the right side.
1
Dark image Image with few bright or dark areas
Bright image
When the image is too dark, the part to the left is cut off (dark portions with no detail) and when the image is too bright, the part to the right is cut off
(bright portions with no detail).
Bright portions blink red and dark portions blink yellow on the monitor when [Bright/Dark Area] is O (On).
1
1
Setting the Display for Instant Review (p.249)
30
1
Understanding Color Balance
Distribution of color intensity is displayed for each color in the RGB histogram. The right side of the graphs look similar for images that have
White Balance adjusted well. If only one color is lopsided to the left, that color is too intense.
1
Setting the White Balance (p.182)
Guide Indicators
The following indicators appear on the monitor to indicate the keys, buttons and e-dial that can be operated at that time.
Example)
2 Four-way controller ( 2 )
3 Four-way controller ( 3 )
4 Four-way controller ( 4 )
5 Four-way controller ( 5 )
S e-dial
Shutter release button
3 button
4 button
| Green button m m c button
M button
K / i button
Viewfinder
The following information appears in the viewfinder.
2
1 1
3 4 5 6 7 8 9 10
11
31
1
2
3
Lit: when flash is available.
Blinks: when flash is recommended but not set.
4
The icon for Picture mode in use appears.
U (Normal mode in I ), = (Portrait), s (Landscape), q (Macro),
\ (Moving Object), .
(Night Scene Portrait)
5
Appears when the Shake Reduction function is activated.
6 Shutter speed
Shutter speed when capturing or adjusting.
Underlined when shutter speed can be adjusted with the e-dial.
7 Aperture value
Aperture value when capturing or adjusting.
Underlined when aperture value can be adjusted with the e-dial.
8
Lit: when the subject is focused.
Blinks: when the subject is not in focus.
9 Number of recordable images/EV compensation value
Displays the number of recordable images with current quality and recorded pixel setting.
The difference from the proper exposure value appears when the mode dial is set to a
m
Underlined when EV compensation value can be adjusted with the edial while the m c button is pressed.
o : Sensitivity
Underlined when the sensitivity can be adjusted with the e-dial
10
Appears when set to \ .
11
Appears while the AE lock is activated.
• [9999] is the maximum number of recordable images that can be displayed in the viewfinder. Even if the number of recordable images is 10000 or more,
[9999] is displayed.
• When [10. AF/AE-L Button] is set to [Cancel AF] in the [
A Custom Setting 2] menu, \ is displayed in the viewfinder while the = / L button is
1
32
How to Change Function Settings
1
Function settings can be changed using the direct keys, the control panel or the menu.
This section explains the basic ways to change function settings.
Using the Direct Keys
In Capture mode, you can set Drive Mode, Flash Mode, White Balance and Sensitivity by pressing the four-way controller ( 2345 ), and set AF point by pressing the 4
Below, how to set the flash mode will be explained as an example.
1
Press the four-way controller ( 3 ) in Capture mode.
The [Flash Mode] screen appears.
2
Use the four-way controller ( 45 ) to select a flash mode.
Flash Mode
Auto Flash Discharge
3
Press the 4 button.
The camera is ready to take a picture.
MENU Cancel
0.0
OK OK
33
Using the Control Panel
While shooting, the current settings can be checked on the status screen.
You can also switch the display to the control panel and change settings.
Below, how to set the JPEG Quality will be explained as an example.
1
Check the status screen and then press the M button.
The control panel appears.
1
Press the M button when the status screen is not displayed.
AUTO
PICT
1/ 20
ISO
AUTO
800
-3 2 1 1 2 +3
AWB
AF.A
F 5.6
ISO
JPEG 12
M
[ 37 ]
2
Use the four-way controller
( 2345 ) to select an item you want to change the setting for.
You cannot select items that cannot be changed.
Custom Image
Bright
HDR
OFF
JPEG
AF.A
12
M
10/10/’09 10:30AM [ 37 ]
34
1
3
Press the 4 button.
The setup screen of the selected item appears.
JPEG Quality
HDR
OFF
JPEG
AF.A
12
M
10/10/’09 10:30AM [ 37 ]
4
Use the four-way controller
( 45 ) or e-dial to select a setting value.
JPEG Quality 128
MENU Cancel OK OK
5
Press the 4 button.
The camera returns to the control panel and is ready to take a picture.
• You can also change the setting by turning the e-dial after selecting the item
you want to change in Step 2 on p.33. For detailed settings such as
parameters, press the 4 button and then make changes.
• The status screen and control panel are not displayed when Live View
(p.143) is displayed. Make the settings in the [
A Rec. Mode] menu.
35
Using the Menus
This section explains operation methods for the [ A Rec. Mode],
[ Q Playback], [ R Set-up] and [ A Custom Setting] menus.
Below, how to set [HDR Capture] in the [ A Rec. Mode 2] menu will be explained as an example.
1
Press the 3 button in
Capture mode.
The [ A Rec. Mode 1] menu appears on the monitor.
If the 3 button is pressed in
Playback mode, the [ Q Playback 1] menu appears. When the mode dial is set to H (Scene), the [ H Scene] menu appears instead.
2
Press the four-way controller
( 5 ).
Each time the four-way controller ( 5 ) is pressed, the menu will change in the following sequence: [ A Rec. Mode 2],
[ A Rec. Mode 3], [ A Rec. Mode 4],
[ Q Playback 1] ··· [ A Rec. Mode 1].
You can also use the e-dial to switch the menus.
3
Use the four-way controller ( 23 ) to choose an item.
1 2 3 4
Custom Image
File Format
JPEG Recorded Pixels
JPEG Quality
D-Range Setting
Lens Correction
JPEG
12
M
MENU Exit
1 2 3 4
Cross Processing
Digital Filter
HDR Capture
Multi-exposure
AF Mode
AE Metering
Select AF Point
MENU Exit
Off
AF.A
1
36
1
4
Press the four-way controller ( 5 ).
Available settings are displayed.
The frame moves to the pop-up menu if there is one.
1 2 3 4
Cross Processing
Digital Filter
HDR Capture
Multi-exposure
AF Mode
AE Metering
Select AF Point
MENU Exit
5
Use the four-way controller ( 23 ) to select a setting.
1 2 3 4
Cross Processing
Digital Filter
HDR Capture
Multi-exposure
AF Mode
AE Metering
Select AF Point
MENU Cancel
6
Press the 4 button.
The camera returns to the menu screen.
Next, set other items.
Press the 3 button to exit the menu and the screen that was displayed before selecting the menu appears again.
Off
AF.A
Off
Standard
Strong
OK OK
Even after you press the 3 button and close the menu screen, your settings will not be saved if the camera is turned off improperly (such as by removing the batteries while the camera is on).
Refer to the following pages for details on each menu item.
• [ A Rec. Mode] menu 1
• [ Q Playback] menu 1
• [ R Set-up] menu 1
• [ A Custom Setting] menu 1
2
Getting Started
This chapter explains your first steps from purchasing the camera to taking pictures. Be sure to read it and follow the instructions.
Attaching the Strap .............................................. 38
Inserting the Batteries .........................................39
Inserting/Removing the SD Memory Card .........44
Attaching the Lens ...............................................48
Adjusting the Viewfinder Diopter .......................50
Turning the Camera On and Off ..........................51
Initial Settings ....................................................... 52
38
Attaching the Strap
2
1
Pass the end of the strap through the strap lug, then secure it on the inside of the clasp.
2
Attach the other end of the strap in the same manner as described above.
Inserting the Batteries
39
Insert batteries into the camera. Use four AA lithium batteries, AA Ni-MH rechargeable batteries, or AA alkaline batteries.
This camera is packaged with AA lithium batteries for checking the camera functionality but other kinds of batteries are also compatible. Use the compatible batteries according to the intended purpose.
Available Batteries
AA lithium batteries
AA Ni-MH rechargeable batteries
AA alkaline batteries
Characteristics
Provided with the camera. Recommended when using the camera in cold climates.
These are rechargeable and are economical.
A commercially available battery charger that is compatible with the batteries is required.
These are easily obtainable when the batteries you are using run out but they may not support all the camera functions under certain conditions. We do not recommend using them except in emergencies or when checking the camera functionality.
2
• Do not use the Ni-Mn batteries as the batteries’ voltage characteristics may cause a malfunction.
• AA lithium batteries and AA alkaline batteries that can be used in this camera are not rechargeable.
• Do not open the battery cover or remove the batteries while the power is on.
• Remove the batteries when you do not plan to use the camera for a long time.
If you leave them in the camera for a long time, they may leak.
• If the date and time settings have been reset when you insert new batteries after a long time has passed since the batteries were removed, follow the
procedure for “Setting the Date and Time” (p.56).
• Insert the batteries correctly. Batteries inserted incorrectly may cause a camera breakdown. Wipe the electrodes of the batteries before inserting.
• Replace all the batteries at the same time and do not mix battery types, brands or old batteries with new ones. Otherwise, malfunctions, such as the battery level not being displayed properly, may occur.
40
1
Push and hold the battery cover unlock lever as shown in the illustration ( 1 ), slide the battery cover toward the lens
( 2 ) and then flip open.
2
2
Insert the batteries according to the +/– indicators in the battery chamber.
2
1
3
Press down on the batteries with the battery cover ( 3 ) and slide it as shown in the illustration ( 4 ) to close.
3
4
Be sure to fully close the battery cover. The camera will not turn on if the battery cover is open.
• Use the AC adapter kit K-AC84 (optional) when using the camera for a
• Check the orientation of the batteries if the camera does not operate properly after replacing the batteries.
Battery Level Indicator
You can confirm remaining battery level by checking the w displayed on the status screen.
41
Status Screen w (Green) f (Orange) z (Red)
“Battery depleted”
Batteries are full.
Battery Level
Batteries are running low.
Batteries are almost empty.
The camera turns off after displaying the message.
f or z (Red) may appear even when the battery level is sufficient if the camera is used at low temperatures or when performing continuous shooting consecutively. In this situation, turn the camera off and on again. If w
(Green) appears, you can use the camera.
2
Approximate Image Storage Capacity and
Playback Time (New Batteries)
(Based on ambient operating temperature of 23 ºC)
Batteries
Normal
Recording
Flash
Photography
(50% Use)
1100
Playback Time
AA lithium batteries
AA Ni-MH rechargeable batteries
(1900mAh)
AA alkaline batteries
1900
640 420
680 minutes
390 minutes
210 130 350 minutes
The image storage capacity (normal recording and flash use 50%) is based on measuring conditions in accordance with CIPA standards, while other data is based on our measuring conditions. Some deviation from the above figures may occur in actual use depending on shooting mode and shooting conditions.
• Battery performance temporarily decreases as the temperature decreases.
When using the camera in cold climates, have extra batteries at hand and keep them warm in your pocket. Battery performance will return to normal when returned to room temperature.
• Have extra batteries ready when traveling overseas, taking pictures in cold climates, or when you will be taking a lot of pictures.
42
2
Using the AC Adapter (Optional)
We recommend using the AC adapter kit K-AC84 (optional) when using the monitor for a long time or when connecting the camera to a computer or AV device.
1
Make sure the camera is turned off.
If batteries are inserted into the camera, open the battery cover and
remove the batteries. Refer to Step 1 on p.40.
2
Open the battery cover and pull out the electric cable cover ( 1 ) on the right side of the battery chamber.
3
Insert the DC coupler into the battery chamber.
4
Pull out the DC coupler’s electric cable as shown in the illustration.
43
5
Close the battery cover.
6
Connect the DC terminal on the AC adapter to the DC coupler.
8
6
7
7
Connect the AC plug cord to the AC adapter.
8
Plug the AC cord into the power outlet.
• Make sure the camera is turned off before connecting or disconnecting the
AC adapter.
• Make sure connections are secure between the terminals. SD Memory Card or data may be corrupted if disconnected while the camera is recording or reading data.
• Keep the electric cable cover closed when not using the AC adapter.
Be sure to read the manual of the AC adapter kit K-AC84 when using the AC adapter.
2
44
2
Inserting/Removing the SD Memory
Card
This camera uses either an SD Memory Card or an SDHC Memory Card.
(Both cards are referred to as SD Memory Cards hereafter.) Make sure the camera is turned off before inserting or removing the SD Memory Card
(commercially available).
• Do not remove the SD Memory Card while the card access lamp is lit.
• Use this camera to format (initialize) an SD Memory Card that is unused or
has been used on other cameras or digital devices. Refer to “Formatting an
SD Memory Card” (p.242) for details on formatting.
• Use a high-speed memory card when recording movies. If the write speed cannot keep up with the recording speed, the writing may stop during recording.
1
Make sure that the camera is turned off.
2
Slide the card cover in the direction of the arrow and then lift it to open ( 1
→
2 ).
1
2
3
Insert the card all the way with the SD Memory Card label facing toward the monitor.
45
Push the SD Memory Card in once to remove.
4
Close the card cover ( 3 ) and then slide it in the direction of the arrow ( 4 ).
4
3
Precautions When Using the SD Memory Card
• The SD Memory Card is equipped with a write-protect switch. Setting the switch to
LOCK prevents new data from being recorded on the card, the stored data from being deleted, and the card from being formatted by the camera or computer.
Write-protect switch
• Care should be taken when removing the SD Memory Card immediately after using the camera because the card may be hot.
• Do not open the card cover, remove the SD Memory Card or turn the camera off while images are being played back or saved to the card, or the camera is connected to a computer with the USB cable. Doing so may cause the data to be lost or the card to be damaged.
• Do not bend the SD Memory Card or subject it to violent impact. Keep it away from water and store away from high temperatures.
• Do not remove the SD Memory Card during formatting. The card may be damaged and become unusable.
• Data on the SD Memory Card may be deleted in the following circumstances.
We do not accept any liability for data that is deleted if
(1) the SD Memory Card is mishandled by the user.
(2) the SD Memory Card is exposed to static electricity or electrical interference.
(3) the SD Memory Card has not been used for a long time.
(4) the SD Memory Card is ejected or the batteries are removed while the data on the card is being recorded or accessed.
2
46
2
• If the SD Memory Card is not used for a long time, the data on the card may become unreadable. Be sure to regularly make a backup of important data on a computer.
• Avoid using or storing the card where it may be exposed to static electricity or electrical interference.
• Avoid using or storing the card in direct sunlight or in locations where it may be exposed to rapid changes in temperature or to condensation.
• Be sure to format SD Memory Cards that are unused or have been used on another camera.
1
Formatting an SD Memory Card (p.242)
• Please note that formatting the SD Memory Card will not necessarily delete the data so that it cannot be recovered using off-the-shelf data recovery software.
If you are going to discard, give away or sell your SD Memory Card you should ensure that the data on the card is completely deleted or the card itself is destroyed if it contains any personal or sensitive information. There are off-theshelf secure data deletion software programs available that will completely delete the data.
In any case, the data on your SD Memory Card should be managed at your own risk.
Recorded Pixels and Quality Level
When the File Format is JPEG
Choose the number of recorded pixels (size) and quality level (JPEG data compression rate) of pictures according to how you intend to use the pictures you have taken.
Pictures with larger recorded pixels or more stars ( E ) are clearer when printed. However, the number of pictures that can be taken (the number of pictures that can be recorded on an SD Memory Card) decreases with larger file sizes.
The quality of the captured photo or printed picture depends on the quality level, exposure control, resolution of the printer and a variety of other factors so you do not need to select more than the required number of pixels. For example, to print in postcard size, i (1728×1152) is adequate. Set the appropriate recorded pixels and quality level depending on how the picture will be used.
1
Setting the JPEG Recorded Pixels (p.174)
1
Setting the JPEG Quality Level (p.175)
JPEG Recorded Pixels, JPEG Quality and Approximate Image
Storage Capacity
(When using a 1 GB SD Memory Card)
JPEG Quality
JPEG Rec. Pixels
E (4288×2848)
J (3936×2624)
P (3072×2048) i (1728×1152)
C
Best
138
163
267
805
D
Better
244
289
468
1373
E
Good
479
564
902
2518
• The number of storable images may vary depending on the subject, shooting conditions, shooting mode and SD Memory Card, etc.
When the number of storable images exceeds 500, captured images are divided into folders containing 500 images each. However, in Exposure
Bracketing, images will be stored in the same folder until shooting is completed, even if the number of images exceeds 500.
When the File Format is RAW
With the a , you can record in the versatile JPEG format or the high quality and editable RAW format. For RAW file format, you can select
PENTAX’s original PEF format or general-purpose DNG (Digital Negative) format designed by Adobe Systems. On a 1 GB SD Memory Card, you can record up to 48 images in both PEF and DNG formats.
1
Setting the File Format (p.177)
47
2
48
Attaching the Lens
2
Attach a proper lens to the camera's body.
When you use one of the following lenses with the a , all the camera’s capture modes will be available.
(a) DA, DA L, D FA, FA J lenses
(b) Lenses with an Aperture s (Auto) position, when used in the s position
Turn the camera off before attaching or removing the lens to prevent unexpected lens movement.
• When lenses described in (b) are used in a position other than s , some
functions will be restricted. Refer to “Notes on [22. Using Aperture Ring]”
• With factory default settings, the camera will not work with lenses other than
those listed above and accessories. Set [22. Using Aperture Ring] to
[Permitted] in the [ A
Custom Setting 4] menu to use them. (p.284)
1
Check that the camera is turned off.
2
Remove the body mount cover
( 1 ) and lens mount cover ( 2 ).
Be sure to put the lens down with the lens mount side facing upward to protect the lens mount from damage.
3
Align the Lens mount index
(red dots: 3 ) on the camera and the lens, and secure by turning the lens clockwise until it clicks.
After attaching, turn the lens counterclockwise to check that the lens is locked in place.
3
49
4
Remove the front lens cap by pushing the indicated portions inward.
To detach the lens, hold down the lens unlock button ( 4 ) and turn the lens counterclockwise.
4
• We assume no responsibility nor liability for accidents, damages and malfunctions resulting from the use of lenses made by other manufacturers.
• The camera body and lens mount incorporate lens information contacts and an AF coupler. Dirt, dust, or corrosion may damage the electrical system.
When necessary, clean the contacts with a soft dry cloth.
The body mount cover ( 1 ) is a cover to prevent scratches and block dust when shipped. Body Mount Cap K is sold separately and has a lock function.
2
50
Adjusting the Viewfinder Diopter
2
Adjust the viewfinder diopter to suit your eyesight.
If it is difficult to see the viewfinder image clearly, slide the diopter adjustment lever sideways.
You can adjust the diopter from approximately –2.5 to +1.5 m
–1
.
1
Look through the viewfinder and slide the diopter adjustment lever left or right.
Adjust the lever until the AF frame in the viewfinder is focused.
Point the camera at a white wall or other bright and consistent surface.
AF frame
• The Eyecup F
Q
is attached to the viewfinder portion when the camera leaves the factory. Diopter adjustment is available with the Eyecup F
Q
attached.
However, adjustment is easier with the eyecup removed.
• To remove the Eyecup F
Q
, pull it out in the direction of the arrow.
To attach the Eyecup F
Q
, align it with the groove on the viewfinder eyepiece and push it into position.
• If it is difficult to see the viewfinder image clearly even if you use the diopter adjustment lever, use the optional diopter correction lens adapter M. However, the
Eyecup F
Q
must be removed to use this
Turning the Camera On and Off
1
Turn the main switch to [ON].
The camera will turn on.
Set the main switch to the position
[OFF] to turn off the camera.
• Always turn the camera off when not in use.
• The power will automatically turn off when you do not perform any operations within a set period of time. To reactivate the camera after it turns off automatically, turn it on again or perform any of the following.
- Press the shutter release button halfway.
- Press the Q button.
- Press the M button.
• By default, the camera is set to turn off automatically after 1 minute of inactivity. You can change the setting in [Auto Power Off] of the [ R Set-up 3]
51
2
52
Initial Settings
2
The first time the camera is turned on after purchasing, the [ Language/ u ] screen appears on the monitor. Follow the procedure below to set the language displayed on the monitor and the current date and time. Once these settings are made, you will not need to set them again when you turn on your camera.
If the [Date Adjustment] screen appears, set the date and time by following the procedure
in “Setting the Date and Time” (p.56).
MENU Cancel OK OK
Date Adjustment
Date Format
Date
Time mm/dd/yy 24h
01 /
Settings complete
MENU Cancel
Setting the Display Language
You can choose the language in which the menus, error messages, etc. are displayed from the following: English, French, German, Spanish,
Portuguese, Italian, Dutch, Danish, Swedish, Finnish, Polish, Czech,
Hungarian, Turkish, Greek, Russian, Korean, Chinese (traditional/ simplified) and Japanese.
1
Use the four-way controller
( 2345 ) to select the desired language.
MENU Cancel OK OK
2
Press the 4 button.
The [Initial Setting] screen for the selected language appears.
Press the four-way controller ( 3 ) twice
and proceed to Step 10 of p.54 if
[Hometown] does not have to be changed.
3
Press the four-way controller ( 3 ).
The cursor moves to W .
4
Press the four-way controller ( 5 ).
The [ W Hometown] screen appears.
5
Use the four-way controller
( 45 ) to select a city.
Initial Setting
English
New York
Text Size Standard
Settings complete
MENU Cancel
Hometown
53
2
New York
DST
MENU Cancel
6
Press the four-way controller ( 3 ).
The cursor moves to [DST] (daylight saving time).
7
Use the four-way controller ( 45 ) to select O or P .
8
Press the 4 button.
The camera returns to the [Initial Setting] screen.
9
Press the four-way controller ( 3 ).
The cursor moves to [Text Size].
OK OK
54
2
10
Press the four-way controller ( 5 ) and use the four-way controller
( 23 ) to select [Standard] or
[Large].
Selecting [Large] magnifies the selected menu item.
11
Press the 4 button.
12
Press the four-way controller ( 3 ) to select [Settings complete].
Initial Setting
English
New York
Text Size Standard
Settings complete
MENU Cancel OK OK
13
Press the 4 button.
The [Date Adjustment] screen appears.
Initial Setting
English
New York
Text Size Standard
Large
Settings complete
MENU Cancel OK OK
In this manual, the menu screens hereafter are described with [Text Size] set to [Standard].
When the Wrong Language is Set
If you mistakenly select the wrong language in the [Language/ u ] screen and proceed to the [Date Adjustment] screen, you can perform the following operation to set the language back.
If you have proceeded to switch the camera to Capture mode (and the camera is ready to take a picture), perform the following operation from
Step 2 to set the language back.
1
Press the 3 button once to display the guides on the monitor.
P ࡊࡠࠣࡓ
⥄േ㔺
The screen shown on the right is an example of the guides displayed. The displayed screen will vary depending on the selected language.
P
2009/01/01 00:00
The guides appear on the monitor for 3 seconds.
2
Press the 3 button once.
[ A 1] is displayed in the upper tab.
H is displayed when the mode dial is set to H .
3
Press the four-way controller ( 5 ) five times.
[ R 1] is displayed in the upper tab.
Press the four-way controller ( 5 ) six times when the mode dial is set to
H .
4
Press the four-way controller ( 3 ) to select [Language/ u ].
5
Press the four-way controller ( 5 ).
The [Language/ u ] screen appears.
6
Use the four-way controller ( 2345 ) to select the desired language and press the 4 button.
The [ R Set-up 1] menu in the selected language appears.
Refer to the following pages and set the desired city for [Hometown] and the current date and time as necessary.
• To change the hometown: “Setting the World Time” (p.244)
• To change the date and time: “Changing the Date and Time Display”
2
55
56
• When the hometown and the date and time are not set, the [Initial Setting] screen or [Date Adjustment] screen will be displayed when the camera is turned on again.
• If you have not proceeded to the [Date Adjustment] screen, you can reselect a language using the four-way controller ( 5 ) in the [Language/ u ] screen.
2
Setting the Date and Time
Set the current date and time and the display style.
1
Press the four-way controller ( 5 ).
The frame moves to [mm/dd/yy].
2
Use the four-way controller
( 23 ) to choose the date format.
Choose [mm/dd/yy], [dd/mm/yy] or [yy/ mm/dd].
Date Adjustment
Date Format
Date
Time
01 /
/
Settings complete
MENU Cancel OK OK
3
Press the four-way controller ( 5 ).
The frame moves to [24h].
4
Use the four-way controller
( 23 ) to select 24h (24-hour display) or 12h (12-hour display).
Date Adjustment
Date Format
Date
Time
01 /
/
Settings complete
24h
MENU Cancel OK OK
5
Press the four-way controller ( 5 ).
The frame returns to [Date Format].
6
Press the four-way controller ( 3 ).
The frame moves to [Date].
7
Press the four-way controller ( 5 ).
The frame moves to the month.
8
Use the four-way controller ( 23 ) to set the month.
Set the day and year in the same manner.
Next, set the time.
If you select [12h] in Step 4, the setting switches between am and pm depending on the time.
9
Press the four-way controller ( 3 ) to select [Settings complete].
Date Adjustment
Date Format mm/dd/yy 24h
Date
Time
01 /
Settings complete
MENU Cancel OK OK
Date Adjustment
Date Format
Date mm/dd/yy 24h
01 /
Time
Settings complete
MENU Cancel OK OK
10
Press the 4 button.
The camera returns to the status screen and is ready to take a picture.
If you set the date and time with the menu operations, the screen will return to the [ R Set-up 1] menu. In this case, press the 3 button.
Pressing the 3 button while adjusting the date cancels the settings made up to that point and switches the camera to Capture mode. If the power is turned on when the date and time are not set, the [Date Adjustment] screen is displayed if the initial settings have been completed. You can also set the date
later by menu operations. (p.244)
57
2
• When you press the 4 button in Step 10, the camera clock is reset to 00 seconds. To set the exact time, press the 4 button when the time signal
(on the TV, radio, etc.) reaches 00 seconds.
• You can change the language and date and time settings with menu
58
Memo
3
Basic Operations
This chapter explains basic operations for shooting by setting mode dial to
I
(Auto Picture) to ensure successful capturing.
For information about advanced functions and settings for taking pictures, refer to chapter 4 and onward.
Basic Shooting Operation ...................................60
Using a Zoom Lens .............................................. 66
Using the Built-in Flash .......................................67
Playing Back Pictures ..........................................74
60
Basic Shooting Operation
3
Holding the Camera
How you hold the camera is important when taking pictures.
• Hold the camera firmly with both hands and keep your elbows close to your body.
• Press the shutter release button gently when taking a picture.
Horizontal position Vertical position
• To reduce camera shake, support your body or the camera on a solid object such as a table, tree, or wall.
• Although there are individual differences among photographers, the limit shutter speed for a handheld camera is generally 1/(focal length ×1.5). For example, it is 1/75 of a second for a focal length of 50 mm and 1/150 of a
second for 100 mm. Use a tripod or the Shake Reduction function (p.128)
when using a lower shutter speed.
• When using a telephoto lens, a tripod that is heavier than the total weight of the camera and lens is recommended to avoid camera shake.
• Do not use the Shake Reduction function when using the camera on a tripod.
61
Letting the Camera Choose the Optimal Settings
The a features various capture modes, focus modes, and drive modes for expressing your photographic vision. This section explains how to take pictures by simply pressing the shutter release button.
1
Set the mode dial to I .
The camera will select the optimal capture mode for the subject.
1
Selecting the Appropriate Capture
3
2
Set the focus mode lever to = .
The focus mode changes to =
(Autofocus) mode.
When the shutter release button is pressed halfway in = , the lens focuses
MF
AF
62
3
Look through the viewfinder to view the subject.
A zoom lens can be used to change the size of the subject in the viewfinder.
MF
AF
3
4
Position the subject inside the
AF frame and press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the viewfinder when the subject comes into focus.
When set to I (Auto Picture) mode, the optimal capture mode is automatically selected from U (Standard),
= (Portrait), s (Landscape), q (Macro),
\ (Moving Object) or .
(Night Scene
Portrait).
The built-in flash pops up automatically when necessary.
1
Operating the shutter release button
1
Subjects that are difficult to focus on
1
Using the Built-in Flash (p.67)
5
Press the shutter release button fully.
The picture is taken.
Flash status
Focus indicator
6
Review the captured image on the monitor.
The image appears for 1 second on the monitor shortly after capturing (Instant
Review).
1
Setting the Display for Instant
You can magnify the image during Instant
Review with the e-dial. (p.202)
You can delete the image during Instant
Review by pressing the K / i button.
1
Deleting a Single Image (p.75)
• You can set the camera so that pressing the = / L button will focus automatically, in the same way as pressing the shutter release button
• You can preview the image on the monitor and check the composition,
exposure, and focus before taking pictures. (p.124)
63
3
64
Operating the shutter release button
The shutter release button has two working positions.
3
Not pressed Pressed halfway
(first position)
Pressed fully
(second position)
Pressing it down halfway (first position) turns on the viewfinder indicators and the autofocus system operates. Pressing it fully
(second position) takes a picture.
• Press the shutter release button gently when taking a picture to prevent camera shake.
• Practice pressing the shutter release button halfway/fully to learn where the first position and second position are.
• The viewfinder indicators are displayed while the shutter release button is pressed halfway. The indicators are displayed for about 10 seconds
(default setting) while the exposure metering timer is on after you take
your finger off the button. (p.30, p.106)
65
Subjects that are difficult to focus on
The autofocus mechanism is not perfect. Focusing may be difficult when taking pictures under the following conditions. These also apply to manual focusing using the focus indicator ] in the viewfinder.
(a) Extremely low-contrast subjects such as a white wall in the focusing area
(b) Subjects which do not reflect much light within the focusing area
(c) Fast moving objects
(d) Strongly reflected light or strong backlighting (bright background)
(e) If repeating vertical or horizontal line patterns appear within the focusing area
(f) Multiple subjects in the foreground and background within the focusing area
If the subject cannot be focused automatically, set the focus mode lever to \ and use the manual focus mode to focus on the subject
with the aid of the matte field in the viewfinder. (p.122)
The subject may not be focused even when the ] (focus indicator) is displayed when (e) and (f) above apply.
3
66
Using a Zoom Lens
3
Enlarge the subject (telephoto) or capture a wider area (wide angle) with a zoom lens. Adjust the subject to the desired size and take pictures.
1
Turn the zoom ring to the right or left.
Turn the zoom ring clockwise for telephoto and counterclockwise for wide angle.
MF
AF
Wide Angle Telephoto
• The smaller the number displayed for the focal length, the wider the angle.
The larger the number, the more magnified the image appears.
• Power Zoom functions (Image Size Tracking, Zoom Clip, and Auto Zoom
Effect) are not compatible with this camera.
Using the Built-in Flash
67
Use the following procedures to take pictures in low light or backlit conditions or when you want to use the built-in flash.
The built-in flash is optimum at about 0.7 m to 5 m from the subject.
Exposure will not be properly controlled and vignetting (darkening of the corners of the image due to a lack of light) may occur when used at a distance closer than 0.7 m (this distance varies slightly depending on the
lens being used and the set sensitivity (p.160)).
Compatibility of built-in flash and lens
Vignetting may occur depending on the lens being used and the capture conditions. We recommend taking a test shot to check the compatibility.
1
Lens Compatibility with the Built-in Flash (p.161)
• When using the built-in flash, remove the lens hood before shooting.
• The built-in flash fully discharges for lenses without a function to set aperture lens ring to s (Auto).
3
For details on the built-in flash and instructions on how to take pictures with an
external flash, refer to the “Using the Flash” (p.155).
Setting the Flash Mode
Flash Mode
C
Auto Flash
Discharge b
Manual Flash
Discharge
Function
The camera automatically measures the ambient light and determines whether to use the flash. The flash pops up and discharges automatically when necessary, such as when using a shutter speed likely to cause camera shake or in backlit conditions (except when in s (Landscape), \ (Moving Object) or l (Night Snap) in H (Scene) mode). The flash may pop up but may not discharge if the camera determines that the flash is not necessary.
Discharges the flash manually. Discharges when the flash is popped up, does not discharge when retracted.
68
3 i
Flash Mode
Auto Flash+Redeye Reduction
D
Manual Flash+
Red-eye Reduct.
G Slow-speed Sync
H
Slow-speed Sync+
Red-eye
I k r
Trailing Curtain
Sync
Wireless Mode
Function
Discharges a pre-flash for red-eye reduction before the automatic flash.
Discharges the flash manually. A pre-flash for red-eye reduction is discharged before the main flash.
Sets to a slow shutter speed depending on the brightness. For example, when using this to shoot a portrait with the sunset in the background, both the person and the background are captured beautifully.
Discharges a pre-flash for red-eye reduction before the main flash is discharged with Slow-speed Sync.
Discharges the flash immediately before closing the shutter curtain. Captures moving objects as if they are
leaving a trail behind. (p.158)
You can synchronize a dedicated external flash
(AF540FGZ or AF360FGZ) without using a sync cord.
The flash modes that can be selected differ depending on the capture mode.
Capture Mode
I / = / s / q / \ / .
/ H e / K / c b / a
Selectable Flash Mode
C / b / i / D / r
E / F / G / H / I / r
E / F / k / r
1
Press the four-way controller ( 3 ) in Capture mode.
The [Flash Mode] screen appears.
The flash modes that can be selected for the set capture mode appear.
2
Use the four-way controller ( 45 ) to select a flash mode.
Turn the e-dial to perform the flash
Flash Mode
Auto Flash Discharge
MENU Cancel
0.0
OK OK
3
Press the 4 button.
The camera is ready to take a picture.
69
3
Using Auto Flash Discharge Mode C , i
(Automatic Flash Pop-up)
1
Set the mode dial to I , = , q , .
or H .
The flash is deactivated when A (Night Scene), K (Sunset), n (Stage
Lighting), U (Candlelight) or E (Museum) is selected in H (Scene) mode. The built-in flash does not pop up when set to l (Night Snap) in
H (Scene) mode.
2
Press the shutter release button halfway.
The built-in flash pops up if necessary and begins charging. When the flash is fully charged, b appears in the
3
Press the shutter release button fully.
The picture is taken.
70
4
Push down on the portion indicated in the illustration to retract the built-in flash.
3
Switch between C (Auto Flash Discharge) and b (Manual Flash Discharge) by pressing the K / i button while the built-in flash is popped up.
Using Manual Flash Discharge Mode b , D
1
Press the K / i button.
The built-in flash pops up and begins charging. The b mode is used regardless of the flash mode settings. When the flash is fully charged, b appears in the
2
Press the shutter release button fully.
The flash discharges and the picture is taken.
3
Push the built-in flash down to retract.
71
When the mode dial is set to a (Flash Off), the built-in flash will not pop up even if the K / i button is pressed.
Using red-eye reduction flash
“Red-eye” is the phenomenon where eyes look reddish in photographs taken in dark environments with a flash. This is caused by the reflection of the electronic flash in the retina of the eye.
Red-eye occurs because pupils are dilated in dark environments.
This phenomenon cannot be averted but the following measures can be used to combat it.
• Brighten the surroundings when shooting.
• Set to wide angle and move closer to the subject if a zoom lens is in use.
• Use a flash that supports red-eye reduction.
• Position the flash as far away from the camera as possible when using an external flash.
The red-eye reduction function on this camera reduces red-eye by discharging the flash twice. With the red-eye reduction function, the pre-flash is discharged just before the shutter is released. This reduces pupil dilation. The main flash is then discharged while the pupils are smaller, reducing the red-eye effect.
To use the red-eye reduction function in Picture mode or H (Scene) mode, select D or F . Set to F or H in other modes.
3
72
3
Daylight-Sync Shooting
In daylight conditions, the flash will eliminate shadows when a portrait picture is taken with a person’s face cast in shadow. Use of the flash in this way is called Daylight-Sync Shooting. The b (Manual Flash
Discharge) mode is used when shooting with Daylight-Sync
Shooting.
Taking pictures
1 Pop up the built-in flash manually and confirm that the flash mode is set to E
2 Confirm that the flash is fully charged.
3 Take a picture.
Without Daylight-Sync With Daylight-Sync
The picture may be overexposed if the background is too bright.
Compensating Flash Output
You can change the flash output in a range of –2.0 to +1.0. The following flash compensation values can be set according to the step interval set in
[1. EV Steps] (p.108) of the [
A Custom Setting 1] menu.
Step Interval
1/3 EV
1/2 EV
Flash Compensation Value
–2.0, –1.7, –1.3, –1.0, –0.7, –0.3, 0.0, +0.3, +0.7, +1.0
–2.0, –1.5, –1.0, –0.5, 0.0, +0.5, +1.0
Set the flash compensation value by turning the e-dial in the [Flash Mode] screen.
Pressing the | (Green) button returns the flash exposure compensation to the default value (0.0). (Available only when [Green
Button] is assigned to the | (Green) button in
[Green Button] of the [ A Rec. Mode 4]
Flash Mode
Manual Flash Discharge
MENU Cancel
+0.3
OK OK
• If the maximum flash output is exceeded when correcting to the plus (+) side, the compensation will not be effective.
• Compensating to the minus (–) side may not affect the image if the subject is too close, the aperture value is small or sensitivity is high.
• The flash compensation is also effective for external flash units which support
P-TTL auto flash mode.
73
3
Allowing Shooting while Charging the Flash
You can set the camera to enable shooting while the flash is being charged.
Set [16. Release While Charging] to [On] in
the [ A
Custom Setting 3] menu (p.82).
By default, pictures cannot be taken while the built-in flash is charging.
16.
Release While Charging
1
2
Off
On
Enables shutter release while the built-in flash is charging
MENU Cancel OK OK
74
Playing Back Pictures
3
Playing Back Images
You can play back captured images with the camera.
Use the provided “PENTAX Digital Camera Utility 4” software to play back
pictures using a computer. Refer to “Using the Provided Software” (p.268) for
details on the software.
1
Press the Q button.
The camera enters Playback mode and the most recently captured image (image with the highest file number) is displayed on the monitor. (For movies, only the first frame is displayed on the monitor.)
Press the M button during playback to switch the information display such as the image data for the displayed image.
Refer to p.25 for display information
details.
2
Press the four-way controller
( 45 ).
4 : Displays the previous image.
5 : Displays the next image.
Refer to “Playback Functions” (p.199) for details on the playback function.
75
Deleting a Single Image
You can delete one image at a time.
• Deleted images cannot be restored.
• Protected images cannot be deleted. (p.219)
1
Press the Q button and use the four-way controller ( 45 ) to select an image to delete.
2
Press the K / i button.
The delete confirmation screen appears.
3
1
3
Use the four-way controller ( 23 ) to select [Delete].
Select a file format to delete for images saved in RAW+ format.
Delete JPEG
Delete RAW
Delete
RAW+JPEG
Deletes only the JPEG image.
Deletes only the RAW image.
Deletes images in both file formats.
4
Press the 4 button.
The image is deleted.
Delete
Cancel
OK OK
When deleting multiple images at once, refer to “Deleting Multiple Images”
76
Memo
4
Shooting Functions
This chapter describes the various basic and advanced shooting functions available with the
a
.
How to Operate the Shooting Functions ........... 78
Selecting the Appropriate Capture Mode ..........83
Setting the Exposure ........................................... 88
Focusing ............................................................. 112
Checking the Composition, Exposure and Focus
Before Shooting (Preview) ................................ 124
Using Shake Reduction Function to Prevent
Camera Shake .................................................... 128
Taking Pictures Continuously .......................... 136
Taking Pictures Using Digital Filters ................ 140
Shooting with the Live View .............................. 143
78
How to Operate the Shooting
Functions
You can change capture-related settings using the direct keys, control panel, [ A Rec. Mode] menus or [ A Custom Setting] menus.
For details on how to operate the menus, refer to “Using the Menus” (p.35).
4
Direct Keys Setting Items
Press the four-way controller ( 2345 ) or 4 button in Capture mode to set the following items.
Key
2
3
4
5
4
Item
Drive Mode
Function
Selects Continuous shooting, Selftimer, Remote Control or Exposure
Bracketing shooting.
Flash Mode
White Balance
Sets the method of flash discharge.
Adjusts the color balance to match the type of the light source illuminating the subject.
Sensitivity Sets the ISO sensitivity.
Select AF Point Sets the focusing area.
Page
79
Rec. Mode Menu Setting Items
The following settings can be performed in the [ A Rec. Mode 1-4] menus.
Press the 3 button in Capture mode to display the [ A Rec. Mode 1] menu.
Menu
A
A
1
2
Item
Custom Image*
File Format*
JPEG Recorded
Pixels*
JPEG Quality*
D-Range
Setting* shooting.
Function
Sets the image finishing tone such as color and contrast before shooting an image.
Sets the file format.
Sets the recording size of images for JPEG
Sets the image quality for JPEG shooting.
Expands the dynamic range and prevents bright and dark areas from occurring.
Page
Lens Correction*
Cross
Processing*
Digital Filter*
Corrects distortions and chromatic aberrations of magnification occurring due to lens properties.
Changes the hues and contrast by performing digital cross processing.
Applies a digital filter effect when taking pictures.
HDR Capture*
Multi-exposure
AF Mode*
Enables capturing images at high dynamic range.
Sets the Multi-exposure shooting settings.
Selects the autofocus mode.
AE Metering*
Selects the part of the viewfinder to use for measuring brightness and determining exposure.
Select AF Point* Selects the part of the viewfinder to focus on. p.117
4
80
4
Menu
A 3
Movie
Item
Live View
Status Screen
Sets the Live View display settings.
Instant Review Sets the Instant Review display settings.
Sets the status screen display color settings. p.248
Color Space
Green Button
Function
Sets the movie settings.
Sets the color space to use.
RAW File Format Sets the file format for RAW shooting.
Assigns the function to be called up when the
| (Green) button is pressed.
Page
Memory
Sets the settings to save when the power is turned off.
A 4 Shake
Reduction*
Sets the Shake Reduction function.
Input Focal
Length
Sets the focal length when using a lens for which focal length information cannot be obtained.
* Can be set using the control panel.
81
Custom Setting Menu Setting Items
Set the [ A Custom Setting 1-4] menus to fully use the functions of a SLR camera.
Menu
A
A
1
2
Item
1. EV Steps
2. Sensitivity Steps
Function
Sets the adjustment steps for exposure.
Sets the adjustment steps for ISO sensitivity.
Expands the lower and upper sensitivity limits.
3. Expanded
Sensitivity
4. Meter Operating
Time
5. AE-L with AF
Locked
Sets the exposure metering time.
6. Link AE to AF
Point
7. Auto Bracketing
Order
8. WB When Using
Flash
9. AWB in Tungsten
Light
10. AF/AE-L Button
11. AF with Remote
Control
12. Remote Control in Bulb
13. Slow Shutter
Speed NR
14. High-ISO NR
Sets whether to lock the exposure value when the focus is locked.
Sets whether to link the exposure and AF point in the focusing area during multisegment metering.
Sets the order for Exposure Bracketing shooting.
Sets the white balance setting when using flash.
Sets whether to adjust the tungsten light color tone when the white balance is set to
F (Auto White Balance).
Sets the function used when the = / L button is pressed.
Sets whether to use Autofocus when shooting with remote control.
While using the remote control with the shutter speed set to h , sets whether to start exposure with a press and stop it with another press of the release button on the remote control unit, or to keep the shutter open as long as the release button on the remote control unit is kept pressed.
Sets whether to use Noise Reduction in slow speed shooting.
Sets whether to use Noise Reduction when shooting with a high ISO sensitivity. Select from three levels.
Page
–
4
82
4
Menu
A
A
3
4
Item
15. High-ISO NR
Start Level
16. Release While
Charging
17. Flash in
Wireless Mode
18. Saving Rotation
Info
19. Auto Image
Rotation
20. Power lamp
21. Catch-in Focus
22. Using Aperture
Ring
Reset Custom
Functions
Function
High-ISO NR is activated when shooting with a sensitivity higher than the set sensitivity.
Sets whether to release shutter while the built-in flash is charging.
Sets the built-in flash discharge method in the wireless mode.
Sets whether to save rotation information when shooting.
Page
Sets whether to perform auto image rotation during playback.
Changes the brightness of the power lamp. p.254
When set to [On], if [AF Mode] is set to f or l and a manual focus lens is attached, catch-in focus shooting is enabled and the shutter is released automatically when the subject comes into focus.
Sets whether to enable shutter release when the lens aperture ring is set to the position other than s .
Resets all the settings in the [ A Custom
Setting 1-4] menus to the defaults.
Selecting the Appropriate Capture
Mode
You can switch the capture modes by setting the icons on the mode dial to the dial indicator.
83
Dial indicator
The a features various shooting modes, enabling you to take pictures with settings suited for your photographic vision.
In this manual, the capture modes are referred to as follows.
Capture Mode
Picture mode
H (Scene) mode
Exposure mode
Movie mode
Mode
I (Auto Picture)/ = (Portrait)/ s (Landscape)/ q (Macro)/ \ (Moving Object)/ .
(Night Scene
Portrait)/ a (Flash Off) (When shooting with Live
View, d (Blue Sky) and K (Sunset) can also be selected.)
A (Night Scene)/ Q (Surf & Snow)/ K (Food)/
K (Sunset)/ n (Stage Lighting)/ R (Kids)/ Y (Pet)/
U (Candlelight)/ E (Museum)/ l (Night Snap) e (Program)/ K (Sensitivity Priority)/ b (Shutter
Priority)/ c (Aperture Priority)/ a (Manual)
C (Movie)
Page
4
84
4
Picture Mode
Set the mode dial to = , s , q , \ , .
or a if you cannot capture the desired image in I (Auto Picture) mode.
The characteristics of each mode are as follows.
Mode
I Auto Picture
= s q
\
.
Portrait
Landscape
Macro
Moving Object
Night Scene
Portrait a Flash Off
Characteristics
The optimal capture mode is automatically selected from the U (Standard), = (Portrait), s (Landscape), q (Macro), \ (Moving Object) and .
(Night Scene
Portrait) modes. When shooting with Live View, d
(Blue Sky) and K (Sunset) can also be selected.
Optimal for capturing portraits. Reproduces a healthy and bright skin tone.
Deepens the focus range, emphasizes contour and saturation of trees and the sky, and produces a vibrant image.
Lets you take vibrant pictures of flowers and other small subjects at short distances.
Lets you take sharp pictures of a quickly moving subject, such as at sporting events. The drive mode is fixed to g (Continuous Shooting (Hi)).
Lets you capture people against a night view or at dusk.
The flash is deactivated. Other settings are the same as U (Standard) in I .
In .
, even though the flash is used, the camera will use slow shutter speeds so the background areas beyond the flash’s reach will also appear correctly exposed in the picture ( 1
Slow-speed Sync (p.156)). To prevent camera
shake, either use the Shake Reduction function or mount the camera on a tripod.
When \ is automatically selected in I , pictures are taken in the drive mode set beforehand.
85
H
Mode
By setting the mode dial to H (Scene), you can choose from the following 10 shooting scenes.
Mode
A Night Scene
Q Surf & Snow
K Food
K Sunset n Stage Lighting
R Kids
Y Pet
U Candlelight
E Museum l Night Snap
Characteristics
Used for night scenes. Use a tripod, etc. to prevent shaking.
For capturing images of dazzling backgrounds, such as snowy mountains.
For capturing images of food. Saturation will be rather high to make it look appetizing.
For capturing sunrise or sunset in beautiful colors.
For capturing moving subjects in poorly lit place.
For capturing moving kids. Reproduces healthy and bright skin tone. The drive mode is fixed to g
(Continuous Shooting (Hi)).
For capturing moving pets. The drive mode is fixed to g (Continuous Shooting (Hi)).
For capturing scenes in candlelight.
For capturing images in places where a flash is prohibited.
For taking snapshots in poorly lit place.
The flash is deactivated in A , K , n , U , and E . To prevent camera shake, either use the Shake Reduction function or mount the camera on a tripod.
4
86
Selecting a Shooting Scene
1
Set the mode dial to H .
The scene mode status screen appears.
4
2
Press the M button.
The icon for the currently selected shooting scene appears in the control panel.
1/ 15
ISO
AUTO
1600
-3 2 1 1 2 +3
AWB
AF.A
F
4.0
ISO
JPEG 12
M
[ 123 ]
3
Use the four-way controller
( 2345 ) to select [Scene
Mode] and press the 4 button.
The scene mode selection screen appears.
4
Use the four-way controller
( 2345 ) or e-dial to choose a scene mode.
Scene Mode
Night Scene
HDR
OFF
AF.A
JPEG 12
M
10/10/’09 10:30AM [ 37 ]
SCN
Used for night scenes.
Use a tripod, etc. to prevent shaking
MENU Cancel OK OK
5
Press the 4 button.
The camera returns to the control panel and is ready to take a picture.
87
When the 3 button is pressed while the mode dial is set to H (Scene), the [ H
Scene] menu appears. The scene mode can also be selected from the [ H Scene] menu.
Night Scene
Used for night scenes.
Use a tripod, etc. to prevent shaking
MENU Exit
Exposure Mode
Use the exposure modes to change the sensitivity, shutter speed and aperture and take pictures according to your own photographic vision.
e
K
Mode
Program
Sensitivity
Priority b Shutter Priority c a
Aperture
Priority
Manual
Characteristics
Automatically sets the shutter speed and aperture value to obtain the proper exposure according to
Program line when taking pictures.
Automatically sets the shutter speed and aperture value to obtain the proper exposure according to the set sensitivity.
Lets you set the desired shutter speed to freeze or emphasize subject movement. Take pictures of fast moving subjects that look still or subjects that give a sense of movement.
Lets you set the desired aperture value for controlling the depth of field. Use it to obtain a blurred or sharp background.
Lets you set the shutter speed and aperture value to capture the picture with creative intent.
Page
4
88
Setting the Exposure
Effect of Aperture and Shutter Speed
Correct exposure of the subject is determined by the combination of shutter speed and aperture setting. There are many correct combinations of shutter speed and aperture value for a particular subject. Different combinations produce different effects.
4
Effect of Shutter Speed
By changing the shutter speed, you can manipulate how time is expressed in the pictures you create. Unlike with your own naked eyes, in a picture you can capture a fraction of a moment or a whole period of time, creating different effects.
Use the b (Shutter Priority) mode.
Using slower shutter speed
If the subject is moving, the image will be blurred because the shutter is open longer.
It is possible to enhance the effect of motion (rivers, waterfalls, waves, etc.) by intentionally using a slower shutter speed.
Using faster shutter speed
Choosing a faster shutter speed will allow freezing the action of a moving subject.
A faster shutter speed also helps to prevent camera shake.
Effect of Aperture
By changing the aperture, you can control the depth of the area that appears in focus in the picture (the depth of field). By either narrowing the focus to emphasize a single point or giving depth to your picture instead you can completely change the feel of the picture you create.
Use the c (Aperture Priority) mode.
Opening the aperture (reduce the aperture value)
Objects closer and farther than the focused subject will be more out of focus. For instance, if you take a picture of a flower against a landscape with the aperture open, the landscape in front and behind the flower will be blurred, emphasizing only the flower.
Closing the aperture (increase the aperture value)
The range in focus expands forward and backward. For instance, if you take a picture of a flower against a landscape with the aperture narrowed, the landscape in front and behind the flower will be in focus.
Aperture and Depth of Field
The following table summarizes how the aperture affects the depth of field.
The depth of field may also change depending on the lens used and the distance to the subject.
Aperture
Depth of field
Area of focus
Lens focal length
Distance to the subject
Open
(Smaller value)
Shallow
Narrow
Longer
(Telephoto)
Near
Close
(Larger value)
Deep
Wide
Shorter
(Wide-angle)
Far
• The depth of field for the a differs depending on the lens but compared to a 35 mm camera, the value is roughly one aperture setting lower (the focused range becomes narrower).
• The wider the wide-angle lens, and the farther away the subject, the deeper the depth of field is (some zoom lenses do not have a scale for depth of field because of their designs).
89
4
90
4
Setting the Sensitivity
You can set the sensitivity to suit the brightness of the surroundings.
The sensitivity can be set to [AUTO] or within a sensitivity range equivalent to ISO 200 to 6400. The default setting is [AUTO].
1
Press the four-way controller ( 5 ) in Capture mode.
The [Sensitivity] screen appears.
2
Use the four-way controller ( 23 ) to select [AUTO Setting] or [Fixed
Value].
Sensitivity
AUTO Setting
ISO
AUTO
200
1600
ISO
200
MENU Cancel
3
Use the four-way controller ( 45 ) to change the ISO sensitivity.
OK OK
For ISO AUTO, change the maximum sensitivity.
4
Press the 4 button.
The camera is ready to take a picture.
91
• When n (Stage Lighting)/ l (Night Snap) in H (Scene) mode or C
(Movie) mode is selected, the sensitivity is fixed to AUTO and cannot be changed.
• When the mode dial is set to K (Sensitivity Priority) or a (Manual), [AUTO
Setting] is not displayed.
• The sensitivity range can be expanded to a range of ISO 100 to 12800 when
[3. Expanded Sensitivity] in the [
A
Custom Setting 1] menu (p.81) is set to
[On]. In this case, the following restrictions apply.
- When the sensitivity is set to ISO 100, bright areas are more likely to occur.
- When [Highlight Correction] is set to [On] (p.189), the minimum sensitivity
is ISO 200.
• Captured images may show more noise if a higher sensitivity is set. You can
reduce image noise by setting [14. High-ISO NR] in the [
A Custom Setting 2]
• You can set whether to lock the sensitivity adjustment to increments of 1 EV
or to coordinate it with the EV steps (p.108) in [2. Sensitivity Steps] of the
[ A
Custom Setting 1] menu (p.81).
4
Expanding the Dynamic Range
Dynamic range is the ratio that indicates the light level expressed by the
CMOS sensor pixels from bright areas to dark areas. The larger it is, the better the whole range from dark to bright areas will appear in the picture.
By expanding the dynamic range, you can expand the light level expressed by the CMOS sensor pixels, making it more difficult for bright area to occur in the image.
To expand the dynamic range, make the settings in [D-Range Setting] of the [ A
92
4
Noise Reduction
When shooting with a digital camera, image noise (image roughness or unevenness) becomes noticeable in the following situations.
- Shooting with a long exposure
- Shooting with a high sensitivity setting
- When the temperature of the CMOS sensor is high
You can reduce image noise by using Noise Reduction. However, images shot with Noise Reduction will take longer to save.
Slow Shutter Speed NR
Reduces noise during long exposures.
Select [On] or [Off] in [13. Slow Shutter Speed NR] of the [
A Custom
1 On
2 Off
The camera determines the conditions such as the shutter speed, sensitivity, and internal temperature, and automatically reduces noise as necessary.
Reduces noise only when the shutter remains open for more than
30 seconds.
* When the exposure time is longer than 30 seconds, the maximum sensitivity is set to ISO 3200 and Noise Reduction is automatically activated.
High-ISO NR
Reduces noise at high sensitivity (ISO) settings.
Select [Medium], [Low], [High] or [Off] in [14. High-ISO NR] of the
[ A
Custom Setting 2] menu (p.81). You can change the sensitivity
from when Noise Reduction is activated in [15. High-ISO NR Start
A
Custom Setting 3] menu (p.82).
1 ISO 800
2 ISO 400
3 ISO 1600
4 ISO 3200
Noise Reduction is activated when the sensitivity is higher than ISO 800. (default setting)
Noise Reduction is activated when the sensitivity is higher than ISO 400.
Noise Reduction is activated when the sensitivity is higher than ISO 1600.
Noise Reduction is activated when the sensitivity is higher than ISO 3200.
* When the sensitivity is set to ISO 6400 or higher, Noise Reduction is automatically activated.
93
Changing the Exposure Mode
This camera features the following five exposure modes. Use the mode
dial to change the exposure mode. (p.83)
The settings available for each exposure mode are as follows.
Exposure
Mode
Description
EV Compensation
Change
Shutter
Speed
Change
Aperture
Value
Change
Sensitivity
Page e
Program
K
Sensitivity
Priority b
Shutter
Priority c
Aperture
Priority a
Manual
Automatically sets the shutter speed and aperture value to obtain the proper exposure according to
Program line when taking pictures.
Automatically sets the shutter speed and aperture value to obtain the proper exposure according to the set sensitivity.
Lets you set the desired shutter speed for expressing moving subjects.
Lets you set the aperture value for controlling the depth of field.
Lets you set the shutter speed and aperture value to capture the picture with creative intent.
z z z z
×
#*
× z
× z
#*
×
× z z z
Other than
AUTO z z
Other than
AUTO
* In [Green Button] of the [ A Rec. Mode 4] menu, you can make the setting so that the
shutter speed and/or aperture value can be changed by turning the e-dial. (p.95)
4
94
Using a Lens with an Aperture Ring
When using a lens with an aperture ring, set the aperture to the s (AUTO) position while holding down the autolock button on the lens.
4 Using the e (Program) Mode
Automatically sets the shutter speed and aperture value to obtain the proper exposure according to Program line when taking pictures.
You can also use the e-dial to change the shutter speed and aperture
value while maintaining the proper exposure (p.95).
1
Set the mode dial to e .
2
Turn the e-dial while pressing the m c button to adjust the exposure.
The EV compensation value is displayed in the status screen and viewfinder.
P
1/ 125
ISO
AUTO
200
-3 2 1 1 2 +3
AWB
AF.A
F
5.6
ISO
JPEG 12
M
[ 37 ]
95
EV compensation value
• EV compensation value can be set in increments of 1/3 EV or 1/2 EV. Set the
exposure steps in [1. EV Steps] of the [
A
Custom Setting 1] menu. (p.108)
• The proper exposure may not be obtained with the selected shutter speed
and aperture value when the sensitivity is not set to [AUTO] (p.90).
4 e-dial in Program
You can set the action for the e-dial when turned in e mode. Set in [Green Button] of the [ A Rec. Mode 4] menu. (This operation is available only when [Green
Button] is assigned to the | (Green)
If the | (Green) button is pressed after turning the e-dial, the camera returns to e mode.
Green Button
Green Button
Action in M Mode e-dial in Program
P SHIFT
Tv
Av
OFF
Shifts combination of the aperture and shutter speed to obtain proper exposure
MENU Cancel OK OK
P SHIFT b c
OFF
Automatically adjusts the shutter speed and aperture value to obtain the proper exposure (Program shift). (default setting)
Sets the shutter speed.
Sets the aperture value.
Disables the e-dial operation when Program Automatic
Exposure is set.
96
Using the K (Sensitivity Priority) Mode
You can set the sensitivity to suit the brightness of the subject.
The shutter speed and aperture value are automatically set according to the selected sensitivity to obtain the proper exposure.
1
Set the mode dial to K .
4
2
Turn the e-dial to adjust the sensitivity.
The set values are displayed in the status screen and viewfinder.
Sv
1/ 30
ISO 200
-3 2 1 1 2 +3
AWB
AF.A
F
4.5
ISO
JPEG 12
M
[ 37 ]
• You can set the sensitivity to values equivalent to ISO 200 to 6400. [AUTO] is not available.
• Turn the e-dial while pressing the m c button to change the EV
• The sensitivity can be set in increments of 1/3 EV or 1/2 EV. Set the exposure
steps in [1. EV Steps] of the [
A
Custom Setting 1] menu. (p.108)
Using the b (Shutter Priority) Mode
Lets you set the desired shutter speed for expressing moving subjects.
When taking pictures of a fast moving subject, you can increase the shutter speed to make the subject look still or decrease the shutter speed to have the subject show movement.
The aperture value is automatically set to give the proper exposure depending on the shutter speed.
1
Effect of Aperture and Shutter Speed (p.88)
1
Set the mode dial to b .
97
4
2
Turn the e-dial to adjust the shutter speed.
The shutter speed can be set within the range of 1/6000 to 30 seconds.
The set values are displayed in the status screen and viewfinder.
Tv
1/ 125
ISO
AUTO
400
-3 2 1 1 2 +3
AWB
AF.A
F
5.6
ISO
JPEG 12
M
[ 37 ]
98
4
• Turn the e-dial while pressing the m c button to change the EV
• The shutter speed can be set in increments of 1/3 EV or 1/2 EV. Set the
exposure steps in [1. EV Steps] of the [
A
Custom Setting 1] menu. (p.108)
• The proper exposure may not be obtained with the selected shutter speed
when the sensitivity is not set to [AUTO] (p.90).
Exposure Warning
If the subject is too bright or too dark, the aperture value will blink in the status screen and viewfinder. If the subject is too bright, choose a faster shutter speed. If it is too dark, choose a slower shutter speed. When the aperture value indication stops blinking, you can take a picture with proper exposure.
Use a commercially available ND (Neutral Density) Filter (p.305) if the
subject is too bright. Use a flash if it is too dark.
Using the c (Aperture Priority) Mode
Set the aperture value for controlling the depth of field. The depth of field is deeper and the front and back of the focused object is clear when the aperture is set to a large value. The depth of field is shallower and the front and back of the focused object is blurred when the aperture is set to a small value.
The shutter speed is automatically set to the proper exposure depending on the aperture value.
1
Effect of Aperture and Shutter Speed (p.88)
1
Set the mode dial to c .
99
2
Turn the e-dial to adjust the aperture value.
The set values are displayed in the status screen and viewfinder.
Av
1/ 30
ISO
AUTO
400
-3 2 1 1 2 +3
AWB
AF.A
F
4.5
ISO
JPEG 12
M
[ 37 ]
4
• Turn the e-dial while pressing the m c button to change the EV
• The aperture value can be set in increments of 1/3 EV or 1/2 EV. Set the
exposure steps in [1. EV Steps] of the [
A
Custom Setting 1] menu. (p.108)
• The proper exposure may not be obtained with the selected aperture value
when the sensitivity is not set to [AUTO] (p.90).
Exposure Warning
If the subject is too bright or too dark, the shutter speed will blink in the status screen and viewfinder. When the subject is too bright, set the aperture smaller (larger number), and when too dark, open the aperture further (smaller number). Once blinking stops, you can take a picture with proper exposure.
Use a commercially available ND (Neutral Density) Filter (p.305) if the
subject is too bright. Use a flash if it is too dark.
100
Using the a (Manual) Mode
You can set the shutter speed and aperture value. This mode is suitable to take pictures of your choice by combining them. This mode is convenient for taking pictures using the same combination of the shutter speed and aperture settings or taking intentionally underexposed (darker) or overexposed (brighter) photographs.
1
Effect of Aperture and Shutter Speed (p.88)
1
Set the mode dial to a .
4
2
Turn the e-dial to adjust the shutter speed.
The shutter speed can be set within the range of 1/6000 to 30 seconds.
3
Turn the e-dial while pressing the m c button to adjust the aperture value.
The set values are displayed in the status screen and viewfinder.
On the status screen, the e-dial indicator appears next to the shutter speed or aperture value, depending on which is being adjusted.
M
1/ 125
ISO 200
-3 2 1 1 2 +3
AWB
AF.A
F
5.6
ISO
JPEG 12
M
[ 37 ]
Of the shutter speed and aperture value, the value being adjusted is underlined in the viewfinder.
While adjusting the shutter speed or aperture value, the difference from the proper exposure (EV value) appears in the viewfinder. The proper exposure is set when [0.0] is displayed.
Difference from the proper exposure
101
4
• When the sensitivity is set to [AUTO] and the mode dial is set to a , the sensitivity is set to the last set value.
• The shutter speed and aperture value can be set in increments of 1/3 EV or
1/2 EV. Set the exposure steps in [1. EV Steps] of the [
A Custom Setting 1]
• The aperture value can also be changed by pressing the m c button once, taking your finger off the button and turning the e-dial. In this case, the aperture value is set when the m c button is pressed again or the exposure
metering timer (p.106) elapses.
Exposure Warning
While adjusting the shutter speed or aperture value, the EV compensation value blinks in the viewfinder when the difference from the proper exposure becomes ±3.0 or larger.
102
Using AE Lock
If [10. AF/AE-L Button] in the [
A Custom Setting 2] menu is set to [AE
Lock], you can press the = / L button to lock the exposure
Example) If the shutter speed is 1/125 sec. and aperture is F5.6 and these settings are locked with the = / L button, the aperture automatically changes to F11 if the shutter speed is changed to 1/30 sec. with the e-dial.
4
Action in a Mode
You can set the function of the |
(Green) button when the camera is set to a mode. Set in [Green Button] of the
[ A Rec. Mode 4] menu. (This operation is available only when [Green Button] is assigned to the | (Green) button.
Green Button
Green Button
Action in M Mode e-dial in Program
P LINE
TvSHIFT
AvSHIFT
OFF
Sets the aperture and shutter speed to the
Program Line exposure
MENU Cancel OK OK
P LINE
Tv SHIFT
Av SHIFT
OFF
Adjusts the aperture value and shutter speed to obtain the proper exposure according to the Program Line. (default setting)
Adjusts the shutter speed while the aperture value remains fixed to obtain the proper exposure.
Adjusts the aperture value while the shutter speed remains fixed to obtain the proper exposure.
Disables the | button operation when the mode dial is set to a .
Using the Bulb Shooting
This setting is useful when shooting night scenes and fireworks which require the long exposures.
1
Set the mode dial to a .
103
2
Turn the e-dial and set the shutter speed to h .
h appears after the slowest shutter speed (30 sec.).
M
Bulb
ISO 200
-3 2 1 1 2 +3
AWB
AF.A
F
5.6
ISO
JPEG 12
M
[ 37 ]
3
Press the shutter release button.
The shutter remains open as long as the shutter release button is kept pressed.
EV Compensation, Continuous Shooting and Exposure Bracketing are not available in Bulb shooting.
4
104
4
• Turn the e-dial while holding down the m c button to adjust the aperture
• The aperture value can be set in increments of 1/3 EV or 1/2 EV. Set the
exposure steps in [1. EV Steps] of the [
A
Custom Setting 1] menu. (p.108)
• The Shake Reduction function is automatically turned off during Bulb shooting.
• Use a sturdy tripod to prevent camera shake during Bulb shooting.
• To operate the shutter release button of the remote control, set in [12.
Remote Control in Bulb] of the [
A
Custom Setting 2] menu. (p.81)
• You can reduce image noise (image roughness or unevenness) caused by
the slow shutter speed. Set in [13. Slow Shutter Speed NR] of the [
A Custom
• When the sensitivity is set to [AUTO] and the shutter speed is set to h , the sensitivity is set to the last set value.
• The upper sensitivity limit for Bulb shooting is ISO 1600.
• There is no limit on exposure time for Bulb shooting. However, we recommend using the AC adapter kit K-AC84 (optional) when shooting with a long exposure setting as the batteries are used while the shutter remains
Selecting the Metering Method
Choose the part of the screen to use for measuring brightness and determining exposure. The following three methods are available.
L
M
N
Multi-segment
Centerweighted
Spot
Segments the viewfinder in 16 parts, meters each portion and determines the proper exposure. (default setting)
Measures the entire viewfinder with an emphasis on the center and determines the exposure.
Measures only a spot in the center of the viewfinder and determines exposure.
1
Press the M button in the status screen.
The control panel appears.
Press the M button when the status screen is not displayed.
2
Use the four-way controller
( 2345 ) to select [AE Metering] and press the 4 button.
The [AE Metering] screen appears.
AE Metering
Multi-segment
HDR
OFF
AF.A
JPEG 12
M
10/10/’09 10:30AM [
3
Use the four-way controller ( 45 ) to select a metering method.
AE Metering
Multi-segment
37 ]
105
4
MENU Cancel
4
Press the 4 button.
The camera returns to the control panel.
You can also change the setting from the [ A Rec. Mode 2] menu.
OK OK
Using the Multi-segment Metering
The scene in the viewfinder is metered in
16 different zones as shown in the illustration when using the multi-segment metering. Even in backlit locations, this mode automatically determines what level of brightness is in which portion and automatically adjusts exposure.
Multi-segment metering method is not available when using a lens other than a DA, DA L, D FA, FA J, FA, F or A lens, or when the lens aperture ring is set to the position other than s .
106
Linking AE to AF Point during Multi-segment
Metering
In [6. Link AE to AF Point] of the [
A
Custom Setting 1] menu (p.81),
you can link the exposure and AF point in the focusing area during multi-segment metering.
1 Off Exposure is set separately from the AF point. (default setting)
2 On Exposure is set in accordance with the AF point.
4
Using the Center-Weighted Metering
Metering is weighted at the center of the viewfinder. Use this metering when you want to compensate the exposure by experience, instead of leaving it to the camera. The illustration shows that sensitivity increases as the pattern height increases (center).
This mode does not automatically compensate for backlit scenes.
Using the Spot Metering
With spot metering, brightness is measured only within a limited area at the center of the viewfinder as shown in the illustration. You can use this in combination with the AE lock
(p.108) when the subject is extremely small
and the correct exposure is difficult to obtain.
Setting the Meter Operating Time
You can set the exposure metering time to [10 sec.] (default setting),
[3 sec.] or [30 sec.] in [4. Meter Operating Time] of the [
A Custom
Adjusting the Exposure
This allows you to deliberately overexpose (brighten) or underexpose
(darken) your picture.
The exposure steps can be selected from 1/3 EV or 1/2 EV in [1. EV Steps]
of the [ A Custom Setting 1] menu.
You can adjust the EV compensation from –3 to +3 (EV).
1
Turn the e-dial while pressing the m c button.
The exposure is adjusted.
m c button
107
4 m is displayed in the status screen and viewfinder during compensation.
Av
1/ 30
ISO
AUTO
400
-3 2 1 1 2 +3
AWB
AF.A
F
4.5
ISO
JPEG 12
M
[ 37 ]
Compensation value
• EV compensation is not available when the mode dial is set to a (Manual).
• The EV compensation is not canceled by turning the camera off or by setting any other capture mode.
• If [Green Button] is assigned to the | (Green) button in [Green Button] of the
[ A
Rec. Mode 4] menu (p.179), the compensation value is reset to 0.0 when
the | button is pressed.
• EV compensation can also be changed by pressing the m c button once, taking your finger off the button and turning the e-dial. In this case, EV compensation is set when the m c button is pressed again or the exposure
metering timer (p.106) elapses.
108
4
Changing the Exposure Steps
Set the exposure setting steps in [1. EV
A Custom Setting 1] menu
(p.81) to increments of 1/3 EV or 1/2 EV.
1.
EV Steps
1
2
1/3 EV Steps
1/2 EV Steps
Step Interval
1/3 EV
1/2 EV
Exposure compensation steps now set to 1/3 EV
MENU Cancel OK OK
Exposure Setting Value
±0.3, ±0.7, ±1.0, ±1.3, ±1.7, ±2.0, ±2.3, ±2.7, ±3.0
±0.5, ±1.0, ±1.5, ±2.0, ±2.5, ±3.0
Locking the Exposure Before Shooting (AE Lock)
AE Lock is a function that locks the exposure prior to taking a picture. Use this when the subject is too small or is backlit and a proper exposure setting cannot be obtained.
1
Select [AE Lock] in [10. AF/AE-
A Custom
Setting 2] menu.
10.
AF/AE-L Button
3
4
1
2
Enable AF1
Enable AF2
Cancel AF
AE Lock
Locks the exposure value when the AF/AE-L button is pressed
MENU Cancel OK OK
2
Press the = / L button.
The camera locks the exposure
(brightness) at that instant.
@ is displayed in the status screen and viewfinder while the AE lock is engaged.
109
• The exposure remains locked as long as the = / L button is kept pressed or the shutter release button is kept pressed halfway. The exposure remains in the memory for a period between 0.5× to 2× the metering timer
(p.106) even after taking your finger off the
= / L button.
• You will hear a beep when the = / L button is pressed. The beep can
• AE lock is not available when the shutter speed is set to h .
• When any of the following operations are performed, AE lock is canceled.
- The = / L button is pressed again
- The Q button, 3 button or M button is pressed
- The mode dial is turned
- The lens is changed
- The lens with an aperture s (Auto) position is set to other than the s position
• The combination of shutter speed and aperture value changes depending on the zooming position even while the AE lock is engaged when using a zoom lens for which the maximum aperture varies depending on the focal length.
However, the exposure value does not change and the picture is taken at the brightness level set when the AE lock is activated.
• The exposure can be locked when the focus is locked. Set in [5. AE-L with
A
Custom Setting 1] menu. (p.120)
4
Changing the Exposure Automatically when Shooting
(Exposure Bracketing)
You can take three pictures continuously with different exposure when the shutter release button is pressed. The first frame is exposed with no compensation, the second frame is underexposed (negative compensation) and the third frame is overexposed (positive compensation).
Normal exposure Underexposure Overexposure
110
4
1
2
3
4
You can set [7. Auto Bracketing Order] in the [
A Custom Setting 1] menu
0 - + Standard ´ Underexposed ´ Overexposed (default setting)
- 0 + Underexposed ´ Standard ´ Overexposed
+ 0 Overexposed ´ Standard ´ Underexposed
0 + Standard ´ Overexposed ´ Underexposed
1
Press the four-way controller ( 2 ) in Capture mode.
The [Drive Mode] screen appears.
2
Use the four-way controller
( 45 ) to select l (Exposure
Bracketing).
Drive Mode
Exposure Bracketing
3 2 1 1 2 3
±0.5EV
MENU Cancel OK OK
3
Turn the e-dial to set the EV compensation value.
The following bracket values can be set according to the step interval set
in [1. EV Steps] (p.108) of the [
A Custom Setting 1] menu.
Step Interval
1/3 EV
1/2 EV
Bracket Value
±0.3, ±0.7, ±1.0, ±1.3, ±1.7, ±2.0, ±2.3, ±2.7, ±3.0
±0.5, ±1.0, ±1.5, ±2.0, ±2.5, ±3.0
4
Press the 4 button.
The camera is ready to take a picture.
5
Press the shutter release button halfway.
The focus indicator ] appears in the viewfinder, and EV compensation value appears in the status screen and viewfinder when focused.
6
Press the shutter release button fully.
Continue to press the shutter release button until three shots have been captured.
Three consecutive images will be taken according to the order set in
[7. Auto Bracketing Order] of the [
A Custom Setting 1] menu.
111
• Exposure Bracketing is not available in \ (Moving Object) of Picture mode, and R (Kids) or Y (Pet) of H (Scene) mode.
• Exposure Bracketing is not available when the shutter speed is set to h .
• Exposure Bracketing and Multi-exposure cannot be used at the same time.
The mode set last is used.
• When [AF Mode] is set to l (Single mode), the focus is locked in the first frame position and is used for subsequent frames.
• When you take your finger off the shutter release button during Exposure
Bracketing, the exposure setting will remain effective for twice as much time as the exposure metering timer (default setting is approx. 20 seconds)
(p.106) and you can take a picture at the next compensation value. In this
case, auto focusing works for each frame. After about twice as much time as the exposure metering timer elapses, the camera returns to settings for taking the first picture.
• You can combine Exposure Bracketing with the built-in flash or an external flash (P-TTL auto only) to change only the flash output continuously.
However, when using an external flash, holding the shutter release button down to take three continuous frames may cause the second and third frame to be taken before the flash is fully charged. Always take one frame at a time after confirming that charging is complete.
4
Taking only overexposed or underexposed pictures
You can use Exposure Bracketing mode for only underexposure or
overexposure shots by combining it with EV Compensation (p.107).
Exposure Bracketing is performed in both cases on the basis of the specified EV compensation value (up to ±3 EV).
112
Focusing
You can focus with the following methods.
=
\
Autofocus
Manual focus
The camera automatically focuses on the subject when the shutter release button is pressed halfway.
Manually adjust the focus.
4
Using the Autofocus
You can also choose the autofocus mode from l (Single mode) where the shutter release button is pressed halfway to focus on the subject and the focus is locked at that position, k (Continuous mode) where the subject is kept in focus by continuous adjustment while the shutter release button is pressed halfway, and f (Auto) which automatically switches between l and k . The default setting is f .
1
1
Set the focus mode lever to = .
MF
AF
2
Look through the viewfinder and press the shutter release button halfway.
The focus indicator ] appears and you will hear a beep when the subject comes into focus. (When blinking, the subject is not in focus.)
1 Subjects that are difficult to focus on
Focus Indicator
113
4
114
4
Using the = / L Button to Focus on the Subject
You can set the camera so that focusing is performed when the = / L button is pressed. Use this setting when the autofocus by pressing the shutter release button halfway is not desired.
1
Select [Enable AF1] or [Enable
AF2] in [10. AF/AE-L Button] of
the [ A Custom Setting 2] menu.
10.
AF/AE-L Button
1
2
3
4
Enable AF1
Enable AF2
Cancel AF
AE Lock
AF is performed when the
AF/AE-L button is pressed
MENU Cancel OK OK
1 Enable AF1
2 Enable AF2
3 Cancel AF
4 AE Lock
Auto focusing is performed by using the = / L button or the shutter release button. (default setting)
Auto focusing is performed only when the = / L button is pressed and not when the shutter release button is pressed halfway.
\ appears in the viewfinder while the = / L button is pressed. Auto focusing is not performed when the shutter release button is pressed. (Take your finger off the = / L button to return to normal autofocus mode.)
The exposure setting is locked when the = / L
2
Press the = / L button.
Auto focusing is performed.
115
Setting the AF Mode
You can choose from the following three autofocus modes.
f
Auto l
Single mode k
Continuous mode
Switches automatically between l and k modes according to the subject. (default setting)
• [AF Mode] is fixed to f in I (Auto Picture) mode.
• Even if f is selected, [AF Mode] is fixed to l when shooting with Live View with the mode dial set to e , K , b , c or a .
When the shutter release button is pressed halfway to focus on the subject, the focus is locked at that position.
• The focus is locked while the focus indicator ] appears in the viewfinder. To focus on another subject, take your finger off the shutter release button first, then press the shutter release button halfway again.
• The shutter cannot be released until the subject is in focus. If the subject is too close to the camera, move back and take the picture. Adjust the focus manually if it is difficult to focus on the
• When the shutter release button is pressed halfway, the built-in flash will discharge automatically several times, making it easier to focus on the subject if the subject is in a dark area and the builtin flash is available.
The subject is kept in focus by continuous adjustment while the shutter release button is pressed halfway. Even if the subject is not in focus, the shutter can be released when the shutter release button is pressed fully.
• Available only when the mode dial is set to e , K , b , c or a .
• [AF Mode] is fixed to k in \ (Moving Object) of Picture mode and n (Stage Lighting), R (Kids), Y (Pet) and l (Night Snap) of H (Scene) mode.
• When the shutter release button is pressed halfway or the
= / L button is used to adjust the focus, the camera automatically tracks the subject if it is determined to be a moving object.
• The built-in flash will not discharge multiple times.
4
116
4
1
Set the focus mode lever to = .
2
Press the M button in the status screen.
The control panel appears.
Press the M button when the status screen is not displayed.
3
Use the four-way controller
( 2345 ) to select [AF Mode] and press the 4 button.
AF Mode
AF.A
HDR
OFF
The [AF Mode] screen appears.
AF.A
JPEG 12
M
10/10/’09 10:30AM [
4
Use the four-way controller ( 45 ) to select an AF mode.
AF Mode
37 ]
MENU Cancel OK OK
5
Press the 4 button.
The camera returns to the control panel.
• You can also change the setting from the [ A
• [AF Mode] cannot be changed in Picture mode and H (Scene) mode.
• Always set the camera to l when using the Quick-Shift Focus System on a DA lens.
117
Selecting the Focusing Area (AF Point)
Choose the part of the viewfinder to set focus to.
b c
Auto
(5 AF Points)
Auto
(11 AF Points)
S
O
Select
Spot
Out of the 5 AF points, the camera selects the optimum AF point even if the subject is not centered. (default setting)
Out of the 11 AF points, the camera selects the optimum AF point even if the subject is not centered.
Sets the focusing area to the user selected point from eleven points in the AF area.
Sets the focusing area to the center of the viewfinder.
1
Press the 4 button in Capture mode.
The [Select AF Point] screen appears.
2
Turn the e-dial to select the AF point.
Select AF Point
4
AUTO
MENU Cancel OK OK
3
Press the 4 button.
The camera is ready to take a picture.
• The focusing area can also be set in the control panel.
• The AF point is fixed to O regardless of this setting when using lenses other than DA, DA L, D FA, FA J, FA or F lenses.
118
Setting the Focus Position in the AF Frame
1
Set the AF point to S and press the four-way controller ( 3 ).
Select AF Point
4
2
Use the four-way controller
( 2345 ) to change the AF point.
MENU Cancel
Select AF Point
OK OK
3
Press the 4 button.
The camera is ready to take a picture.
MENU Cancel OK OK
The selected AF point appears in the status screen.
AUTO
PICT
1/ 20
ISO
AUTO
800
-3 2 1 1 2 +3
AWB
AF.A
F
5.6
ISO
JPEG 12
M
[
OK
37 ]
119
• If you press the | (Green) button while the status screen is displayed when
[Center AF Point] is assigned to the | button in [Green Button] of the [ A
Rec. Mode 4] menu, the screen in Step 2 appears.
• The position of the changed AF point is stored even if the camera is turned off or the focusing area is switched to b , c or O .
Locking the Focus (Focus Lock)
If the subject is outside the range of the focusing area, the camera cannot automatically focus on the subject. In this situation, set [AF Mode] to l
(Single mode). You can aim the focusing area toward the subject, use the focus lock and recompose the picture.
1
Set [AF Mode] to l .
2
Frame the desired composition for your picture in the viewfinder.
4
3
Center the subject to focus in the viewfinder and press the shutter release button halfway.
The focus indicator ] appears and you will hear a beep when the subject comes into focus. (When blinking, the subject is not in focus.)
Example) The person is out of focus and the background is focused instead.
120
4
Lock the focus.
Keep the shutter release button pressed halfway. The focus will remain locked.
5
Recompose the picture while keeping the shutter release button pressed halfway.
4
• The focus is locked while the focus indicator ] is displayed.
• Turning the zoom ring with the focus locked may cause the subject to be out of focus.
• The beep that sounds when the image is focused can be turned off. (p.243)
• You cannot set the focus lock when [AF Mode] is set to k (Continuous mode), the Picture mode is set to \ (Moving Object) or H (Scene) mode is set to n (Stage Lighting), R (Kids), Y (Pet) or l (Night Snap). In such cases, the autofocus continues to focus on the subject until the shutter is released (Continuous Autofocus).
Locking Exposure when the Focus is Locked
Set [5. AE-L with AF Locked] in the
[ A
Custom Setting 1] menu (p.81) to lock the
exposure value while the focus is locked. By default, the exposure is not locked when the focus is locked.
5.
AE-L with AF Locked
1
2
Off
On
AE is locked when the focus is locked
MENU Cancel OK OK
1 Off Exposure is not locked when the focus is locked. (default setting)
2 On Exposure is locked when the focus is locked.
121
Adjusting the Focus Manually (Manual Focus)
When you adjust the focus manually, you can use either the focus indicator or the matte field in the viewfinder.
Using the Focus Indicator
The focus indicator ] appears in the viewfinder when the subject is in focus even during manual focus.
You can manually adjust the focus using the focus indicator ] .
1
Set the focus mode lever to \ .
4
2
Look through the viewfinder, press the shutter release button halfway and turn the focusing ring.
The focus indicator ] appears and you will hear a beep when the subject comes into focus.
MF
AF
Focus Indicator
122
• Adjust the focus manually using the matte field in the viewfinder when the
subject is difficult to focus (p.65) and the focus indicator will not appear.
• The beep that sounds when the image is focused can be turned off. (p.243)
Using the Viewfinder Matte Field
You can manually adjust the focus using the matte field in viewfinder.
1
Set the focus mode lever to \ .
4
2
Look through the viewfinder and turn the focusing ring until the subject is clearly visible on the focusing screen.
MF
AF
123
Shooting in Catch-in Focus Mode
When [21. Catch-in Focus] in the [
A
is set to [On], if [AF Mode] is set to f or l and one of the following types of lenses is attached, catch-in focus shooting is enabled and the shutter is released automatically when the subject comes into focus.
• Manual focus lens
• DA or FA lens that has an = and \ setting on the lens (the setting on the lens must be set to \ before shooting)
How to Take Pictures
1 Attach a proper lens to the camera.
2 Set the focus mode lever to = .
3 Set [AF Mode] to f or l .
4 Set the focus on a position the subject will pass.
5 Press the shutter release button fully.
The shutter is released automatically when the subject comes into focus in the set position.
4
124
Checking the Composition, Exposure and Focus Before Shooting (Preview)
You can use the preview function to check depth of field, composition, exposure and focus before taking a picture.
There are two preview methods.
Preview Method Description
| Optical Preview For checking the depth of field with the viewfinder.
e Digital Preview
For checking the composition, exposure and focus on the monitor.
4
You can also use the Live View function to display a real-time image on the monitor and change the shooting function settings during display and check the
settings by enlarging the image. Refer to p.143 for details.
Assigning the Preview Function to the Green
Button
First, assign the Preview function to the | (Green) button.
1
Select [Green Button] in the
[ A Rec. Mode 4] menu and press the four-way controller ( 5 ).
The [Green Button] screen appears.
1 2 3 4
Green Button
Memory
Shake Reduction
Input Focal Length 35mm
2
Press the four-way controller
( 5 ).
MENU Exit
Green Button
Green Button
Action in M Mode e-dial in Program
P LINE
P SHIFT
MENU
3
Use the four-way controller
( 23 ) to select [Optical Preview] or [Digital Preview] and press the
4 button.
If you selected [Optical Preview], proceed to Step 6.
Green Button
RAW
Green Button
Custom Image
Optical Preview
Digital Preview
Digital Filter
RAW Button Function
Center AF Point
MENU Cancel OK OK
4
Use the four-way controller
( 23 ) to select [Histogram] or
[Bright/Dark Area].
Green Button
Digital Preview
Histogram
Bright/Dark Area
125
4
MENU
5
Use the four-way controller ( 45 ) to select O or P .
6
Press the 3 button twice.
The Preview function is assigned to the | button and the camera is ready to take a picture.
While shooting with Multi-exposure or Live View, Optical Preview is used regardless of the setting.
126
Displaying the Optical Preview
1
Position the subject inside the AF frame and press the shutter release button halfway to focus on the subject.
4
2
Press the | button while looking through the viewfinder.
You can check the depth of field in the viewfinder while the | button is pressed.
During this time, no shooting information is displayed in the viewfinder, and the shutter cannot be released.
3
Take your finger off the | button.
Optical Preview is ended and the camera is ready to take a picture.
127
Displaying the Digital Preview
1
Focus on the subject, then compose the picture in the viewfinder and press the | button.
The icon ( | ) appears on the monitor during preview and you can check the composition, exposure and focus.
INFO
Available operations e-dial
M button
Enlarges the preview image. (p.202)
Saves the preview image. Select [Save as] and press the 4 button.
2
Press the shutter release button halfway.
Digital Preview is ended and the autofocus system operates.
The maximum display time for Digital Preview is 60 seconds.
4
128
Using Shake Reduction Function to
Prevent Camera Shake
4
Taking Pictures Using the Shake Reduction
Function
The Shake Reduction function reduces camera shake that occurs when the shutter release button is pressed. This is useful for taking pictures in situations where camera shake is likely to occur. The Shake Reduction function allows you to take pictures at approximately 4 steps slower shutter speed without the risk of camera shake.
The Shake Reduction function is ideal when taking pictures in the following situations.
• When taking pictures in dimly lit locations, such as indoors, at night, on cloudy days and in the shade
• When taking telephoto pictures
Blurred picture
Picture taken with the Shake Reduction function
• The Shake Reduction function does not compensate for blurring caused by subject movement. To take pictures of a moving subject, increase the shutter speed.
• The Shake Reduction function may not fully reduce camera shake when taking close-up shots. In this case, it is recommended that the Shake
Reduction function be turned off and the camera be used with a tripod.
• The Shake Reduction function will not fully work when shooting with a very slow shutter speed, for example when panning or shooting night scenes. In this case, it is recommended that the Shake Reduction function be turned off and the camera be used with a tripod.
129
Setting the Shake Reduction Function
1
Press the M button in the status screen.
The control panel appears.
Press the M button when the status screen is not displayed.
2
Use the four-way controller
( 2345 ) to select [Shake
Reduction] and press the 4 button.
Shake Reduction
On
AF.A
HDR
OFF
The [Shake Reduction] screen appears.
JPEG 12
M
10/10/’09 10:30AM [
3
Use the four-way controller ( 45 ) to select k (On) or l (Off).
k : Uses Shake Reduction. (default setting) l : Does not use Shake Reduction.
Shake Reduction
On
37 ]
MENU Cancel
4
Press the 4 button.
The camera returns to the control panel.
5
Press the shutter release button halfway.
k appears in the viewfinder and the
Shake Reduction function is activated.
OK OK
• Be sure to turn the Shake Reduction function off when using the camera with a tripod.
• The Shake Reduction function automatically turns off in the following situations.
- Self-timer
- Remote control shooting
- Bulb shooting
- HDR Capture
- Using the external flash in the wireless mode
4
130
• You can also change the setting from the [ A
• The Shake Reduction function will not fully work (for about 2 seconds) right after turning on the camera or restoring from Auto Power Off. Wait for the
Shake Reduction function to become stable before gently pressing the shutter release button to take a picture. Press the shutter release button halfway. The camera is ready to take a picture when k appears in the viewfinder.
• The Shake Reduction function is available with any a compatible PENTAX lens. However, when the aperture ring is set to other than the s (Auto) position or a lens without an s
position is used, the camera will not operate unless [22.
Using Aperture Ring] is set to [Permitted] in the [
A Custom Setting 4] menu. Set this beforehand. However, in such cases some functions will be restricted. Refer
to “Notes on [22. Using Aperture Ring]” (p.284) for details.
4
When the Focal Length Cannot Be Automatically Detected
The Shake Reduction function operates by obtaining the lens information such as focal length.
If the camera uses a DA, DA L, D FA, FA J, FA or F lens, the lens information is automatically obtained when the Shake Reduction function is activated.
The [Input Focal Length] setting screen appears when the camera is turned on with the Shake Reduction function set to k and a type of lens that does not support automatic obtaining the lens information such as
focal length (p.282) is mounted.
Set the focal length manually in the [Input Focal Length] setting screen.
• The [Input Focal Length] setting screen does not appear when using a lens that supports automatic obtaining the lens information such as focal length.
• When using a lens without the s position on the aperture or with the aperture set to a position other than the s
position, set [22. Using Aperture Ring] in
the [ A
Custom Setting 4] menu to [Permitted]. (p.284)
1
Use the four-way controller
( 45 ) or the e-dial to set the focal length.
Select from the following 34 focal length values. (The default setting is 35 mm.)
8 10 12 15 18 20 24 28 30 35
40 45 50 55 65 70 75 85 100 120
135 150 180 200 250 300 350 400 450 500
550 600 700 800
Input Focal Length
100
120
MENU Cancel
135
OK OK
131
• If the focal length for your lens is not listed above, select the value closest to the actual focal length (example: [18] for 17 mm and [100] for 105 mm).
• When using a zoom lens, select the actual focal length at the zoom setting being used in the same manner.
2
Press the 4 button.
The camera is ready to take a picture.
• To change the focal length setting, use [Input Focal Length] in the [ A Rec.
• The effect of Shake Reduction is influenced by the shooting distance as well as focal length information. The Shake Reduction function may not work as effectively as expected when shooting at close ranges.
Shooting with the Self-timer
This camera has the following two types of self-timers.
g
Z
Self-timer
(12 sec.)
Self-timer
(2 sec.)
Shutter will be released after about 12 seconds. Use this mode to include the photographer in the picture.
A mirror pops up immediately after shutter release button is pressed. The shutter is released after about 2 seconds. Use this mode to avoid camera shake when the shutter release button is pressed.
1
Mount the camera onto a tripod.
4
2
Press the four-way controller ( 2 ) in Capture mode.
The [Drive Mode] screen appears.
132
3
Use the four-way controller
( 45 ) to select g
.
Drive Mode
Single Frame Shooting
4
4
Press the four-way controller ( 3 ) and use the four-way controller
( 45 ) to select g .
MENU Cancel
Drive Mode
Self-timer (12 sec.)
OK OK
2 s
OK OK
5
Press the 4 button.
The camera is ready to take a picture.
6
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the viewfinder when the subject is in focus.
MENU Cancel
7
Press the shutter release button fully.
The front self-timer lamp starts blinking slowly and then blinks rapidly 2 seconds before the shutter is released. The beep is heard and the rate increases for the last
2 seconds. The shutter will be released about 12 seconds after the shutter release button is pressed fully.
133
Using the Mirror Lock-up Function
Use the Mirror Lock-up function if camera shake is evident even when a remote control unit (optional) is used with a tripod.
When shooting with the 2 sec. self-timer, the mirror pops up and the shutter is released 2 seconds after you press the shutter release button, thereby avoiding the vibration of the mirror.
Follow the procedure below to take a picture with the Mirror Lock-up function.
1
Mount the camera onto a tripod.
2
Select Z in the drive mode.
Refer to Steps 1 to 5 on p.131 for details.
3
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the viewfinder when focused.
4
Press the shutter release button fully.
A picture is taken 2 seconds after the mirror pops up. The AE lock function is enabled with the exposure value set immediately before the mirror pops up.
• The self-timer shooting is not available in \ (Moving Object) of Picture mode, and R (Kids) or Y (Pet) of H (Scene) mode.
• Select a mode other than g or Z in the [Drive Mode] screen to cancel the self-timer shooting. The setting is canceled when the camera is turned off if
[Drive Mode] is set to P
(Off) in [Memory] (p.260) of the [
A Rec. Mode 4] menu.
• The Shake Reduction function is automatically turned off when g or Z is set.
• You can set the camera so that the beep does not sound. (p.243)
• The exposure may be affected if the light enters the viewfinder. Use the AE
lock function (p.108). The light entering the viewfinder has no effect on the
exposure when the mode dial is set to a
4
134
4
Shooting with the Remote Control (Optional)
The shutter can be released from a distance by using the optional remote control unit. You can select from the following two settings for remote control shooting.
h Remote Control i
Remote Control
(3s delay)
The shutter will be released immediately after the shutter release button on the remote control unit is pressed.
The shutter is released about 3 seconds after the shutter release button on the remote control unit is pressed.
1
Mount the camera onto a tripod.
2
Press the four-way controller ( 2 ) in Capture mode.
The [Drive Mode] screen appears.
3
Use the four-way controller ( 45 ) to select h .
4
Press the four-way controller ( 3 ) and use the four-way controller
( 45 ) to select h or i .
Drive Mode
Remote Control
The self-timer lamp will blink to let you know that the camera is in remote control stand-by status.
MENU Cancel
5
Press the 4 button.
The camera is ready to take a picture.
OK OK
6
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the viewfinder when focused.
7
Point the remote control unit towards the remote control receiver on the front of the camera and press the shutter release button on the remote control unit.
4 m
The operating distance of the remote control unit is about 4 m from the front of the camera.
After the picture is taken, the self-timer lamp lights for 2 seconds and then returns to blinking.
• The remote control shooting is not available in \ (Moving Object) of Picture mode, and R (Kids) or Y (Pet) of H (Scene) mode.
• By default, you cannot adjust the focus with the remote control unit. Focus on the subject first with the camera before operating with the remote control.
When [11. AF with Remote Control] is set to [On] in the [
A Custom Setting 2]
menu (p.81), you can use the remote control unit to adjust the focus.
• When using the remote control unit, the built-in flash does not pop up automatically even when set to g (Auto Flash Discharge). Press the K / i
button to pop up the built-in flash beforehand. (p.70)
• The exposure may be affected if the light enters the viewfinder. Use the AE
lock function (p.108). The light entering the viewfinder has no effect on the
exposure when the mode dial is set to a
• Select a mode other than h or i in the [Drive Mode] screen to cancel the remote control shooting. The setting is canceled when the camera is turned off if [Drive Mode] is set to P
(Off) in [Memory] (p.260) of the [
A Rec. Mode 4] menu.
• The Shake Reduction function is automatically turned off when h or i is set.
• The remote control may not operate in backlit conditions.
• The remote control unit battery can send a remote control signal about
30,000 times. Contact PENTAX Service Center to replace the battery (this will involve a fee).
135
4
136
Taking Pictures Continuously
4
Continuous Shooting
Pictures can be taken continuously while the shutter release button is kept pressed.
The following two types of continuous shooting are available.
g
Continuous
Shooting (Hi) h
Continuous
Shooting (Lo)
When JPEG image quality is set to E / C , up to 17 frames are taken continuously at approximately 4.7 fps.
The shooting interval will increase as the camera buffer memory fills up.
When JPEG image quality is set to E / C , pictures are taken continuously at approximately 2 fps until the SD
Memory Card is full.
When the file format is [RAW], up to 5 frames for g or up to 11 frames for h can be taken continuously.
1
Press the four-way controller ( 2 ) in Capture mode.
The [Drive Mode] screen appears.
2
Use the four-way controller
( 45 ) to select g .
Drive Mode
Single Frame Shooting
3
Press the four-way controller ( 3 ) and use the four-way controller
( 45 ) to select g or h .
MENU Cancel OK OK
Drive Mode
Continuous Shooting (Hi)
MENU Cancel OK OK
4
Press the 4 button.
The camera is ready to take pictures continuously.
5
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the viewfinder when focused.
6
Press the shutter release button fully.
Pictures are taken continuously while the shutter release button is fully pressed. Take your finger off the shutter release button to stop.
• The drive mode is fixed to g in \ (Moving Object) of Picture mode, and R
(Kids) or Y (Pet) of H (Scene) mode.
• If [AF Mode] is set to l (Single mode), the focus position is locked on the first frame and pictures are taken continuously at the same interval.
• Focusing is continuously activated during continuous shooting when
[AF Mode] is set to k (Continuous mode).
• The shutter cannot be released until charging is complete when using the built-in flash. You can set the camera to enable shutter release before the
built-in flash is ready in [16. Release While Charging] of the [
A Custom
• Select a mode other than g or h in the [Drive Mode] screen to cancel the continuous shooting. The setting is canceled when the camera is turned off if
[Drive Mode] is set to P
(Off) in [Memory] (p.260) of the [
A Rec. Mode 4] menu.
• The shooting speed may be slower when [Distortion Correction] or [Lat-
Chromatic-Ab Adj] (p.192) is set to [On].
137
4
138
4
Multi-exposure
You can create a composite picture while taking multiple frames.
Multi-exposure is not available when the mode dial is set to C (Movie), or when
Cross Processing, Digital Filter or HDR Capture is set.
1
Select [Multi-exposure] in the [ A Rec. Mode 2] menu and press the four-way controller ( 5 ).
The [Multi-exposure] screen appears.
2
Use the four-way controller ( 23 ) to select [Number of
Shots].
3
Press the four-way controller ( 5 ) and use the four-way controller
( 23 ) to select the number of shots.
Select from 2 to 9 shots.
Multi-exposure
Start Shooting
Number of Shots
Auto EV Adjustment
2 times
MENU Cancel
4
Press the 4 button.
5
Use the four-way controller ( 23 ) to select [Auto EV
Adjustment] and use the four-way controller ( 45 ) to select O or P .
When set to O , the exposure is adjusted automatically according to the number of shots.
6
Use the four-way controller ( 23 ) to select [Start
Shooting] and press the 4 button.
The camera returns to Capture mode.
OK OK
7
Take the picture.
The composite picture is displayed in Instant Review each time the shutter release button is pressed. Press the K / i button during
Instant Review to discard pictures taken up to that point and take pictures again from the first frame.
The pictures are saved when the set number of shots has been taken, and then the [Multi-exposure] screen appears again.
139
• Multi-exposure and Exposure Bracketing cannot be used at the same time.
The mode set last is used.
• [Distortion Correction] and [Lat-Chromatic-Ab Adj] (p.192) are disabled when
Multi-exposure is set.
4
• If any of the following operations are performed while shooting, the pictures that have been already taken are saved and Multi-exposure is exited.
- The Q button, 3 button, four-way controller ( 234 ) or M button is pressed
- The mode dial is turned
- Exposure Bracketing is set
• When shooting in Multi-exposure mode using Live View, a semi-transparent composite image of the pictures taken is displayed.
140
Taking Pictures Using Digital Filters
4
You can apply a filter when taking pictures.
The following filters can be selected.
Filter Name
Toy Camera
Retro
High Contrast
Extract Color
Soft
Star Burst
Fish-eye
Custom Filter
Effect
For taking pictures that look as if taken with a toy camera.
For taking pictures with the look of old photos.
Parameter
Shading Level: +1/+2/+3
Blur: +1/+2/+3
Tone Break: Red/Green/Blue/
Yellow
Toning: -3 to +3
Frame Composite: None/Thin/
Medium/Thick
For taking pictures with high contrasts.
Customize and save a filter to your own preferences.
+1 to +5
For extracting a specific color and making the rest of the image black and white.
For taking pictures with a soft focus throughout the image.
Color: Red/Magenta/Blue/
Cyan/Green/Yellow
Color Freq. Range: -2 to +2
Soft Focus: +1/+2/+3
Shadow Blur: OFF/ON
Effect Density: Small/Medium/
Large
For taking pictures of night scenes or lights reflected on water with a special sparkling look achieved by adding crosslike effects to the picture's highlights.
For taking pictures that look as if taken with a fish-eye lens.
Size: Short/Medium/Long
Angle: 0°/30°/45°/60°
Weak/Medium/Strong
High Contrast: OFF/+1 to +5
Soft Focus: OFF/+1/+2/+3
Tone Break: OFF/Red/Green/
Blue/Yellow
Shading Type: 6 types
Shading Level: -3 to +3
Distortion Type: 3 types
Distortion Level: OFF/Weak/
Medium/Strong
Invert Color: OFF/ON
141
• When Digital Filter is set, the file format is always set to [JPEG] and cannot be changed. You cannot use Digital Filter when the file format is set to [RAW] or [RAW+].
• When Digital Filter is set, Multi-exposure is not available.
• Digital Filter and HDR Capture cannot be used at the same time. The mode set last is used.
Depending on the filter used, it may take longer to save images.
1
Press the M button in the status screen.
The control panel appears.
Press the M button when the status screen is not displayed.
2
Use the four-way controller
( 2345 ) to select [Digital Filter] and press the 4 button.
Digital Filter
Not use any filters
HDR
OFF
The screen for selecting the filter appears.
JPEG
AF.A
12
M
10/10/’09 10:30AM [
3
Use the four-way controller
( 45 ) to select a filter.
Star Burst
37 ]
4
MENU Cancel Check
INFO
OK OK
142
4
Use the four-way controller
( 23 ) to select the parameter and the four-way controller ( 45 ) to adjust the parameter’s value.
Effect Density
4
MENU Cancel Check
INFO
OK OK
Available operations m c button
M button
You can use Digital Preview to preview the background image with the selected filter.
Saves the background image. Select [Save as] and press the 4 button.
5
Press the 4 button.
The camera returns to the control panel.
• You can also change the settings from the [ A
• Select [Not use any filters] in Step 3 to finish shooting with digital filter.
• You can also apply digital filter effects to images after shooting them in
Shooting with the Live View
143
You can shoot a picture or a movie while displaying the real-time image on the monitor.
• The image in Live View may differ from the captured image if the brightness of the subject is low or high.
• If any changes occur in the shooting light source during Live View, the image may flicker.
• If the camera position is changed rapidly during Live View, the image may not be displayed with the appropriate brightness. Wait for the display to become stable before shooting.
• Noise may appear on the Live View image when used in dark locations.
• If you continue shooting with the Live View for a prolonged period, the internal temperature of the camera may increase, resulting in lower quality images. It is recommended that you turn off Live View when not shooting. To prevent the image quality from degrading, allow enough time for the camera to cool down while shooting with long exposures or recording movies.
• If the internal temperature of the camera is high, l (temperature warning) will appear on the monitor and Live View may not be available.
• If Live View is used in places where the camera may become hot, such as in direct sunlight, l (temperature warning) may appear on the monitor. Cancel
Live View, as the internal temperature of the camera is rising.
• Live View can be displayed for up to 5 minutes. However, if Live View is used even after l (temperature warning) appears, Live View may end before 5 minutes elapse. Shooting with the viewfinder is available even if Live View is ended.
• The higher the sensitivity, the more noise and color unevenness may occur in the Live View image and/or captured image.
4
• Shooting while holding the camera by hand and viewing the monitor can cause camera shake. Use of a tripod is recommended.
• Live View is not displayed when data is being saved to an SD Memory Card.
144
Taking Still Pictures
4
Setting the Live View
You can set the display items and autofocus mode for Live View.
1
Select [Live View] in the [ A Rec. Mode 3] menu and press the four-way controller ( 5 ).
The [Live View] screen appears.
2
Use the four-way controller ( 23 ) to select [Info Overlay], [Show
Grid], [Histogram] or [Bright/Dark
Area].
Live View
Info Overlay
Show Grid
Histogram
Bright/Dark Area
Autofocus Mode
MENU
3
Use the four-way controller ( 45 ) to select O or P .
4
Use the four-way controller ( 23 ) to select [Autofocus
Mode] and press the four-way controller ( 5 ).
5
Use the four-way controller ( 23 ) to select an autofocus mode.
Live View
Info Overlay
Show Grid
Histogram
Bright/Dark Area
Autofocus Mode
MENU
145
I
Face Detection
AF i Contrast AF
S
Phase
Difference AF
Gives autofocus priority to detected faces and performs contrast autofocus. A yellow frame appears for the main face (white frames appear for other faces), and autofocus and automatic exposure are performed for the main face. (default setting)
Displays Live View and performs autofocus based on the information obtained from the image sensor.
Cancels Live View and performs autofocus with the
AF sensor.
6
Press the 4 button.
7
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
• It takes more time to focus on the subject when using I or i than when using S . It is also difficult for the camera to focus on the following objects
(or under the following conditions).
- Objects with poor contrast
- Objects with no vertical contrast, such as horizontal stripes
- Objects with constantly changing brightness, shape, or color, such as a water fountain
- Objects whose distance from the camera changes
- Small objects
- Objects appearing in both the foreground and background
- When using a special filter
- Objects at the edge of the screen
• If the shutter release button is pressed halfway during Live View when
[Autofocus Mode] is set to S (Phase Difference AF), the Live View image will disappear and the autofocus system operates. Once focused, the Live
View image will be displayed again.
• The face detection is not performed when the focus mode is set to \
(except when in I (Auto Picture)).
• When [AF Mode] is set to k (Continuous mode), the built-in flash will not discharge multiple times.
4
146
Taking a Still Picture
1
Select a Capture mode.
Set the mode dial to any mode other than C .
2
Press the U button.
4
The mirror pops up and a real-time image is displayed on the monitor.
Press the U button again to exit Live View.
Live View can be displayed for up to 5 minutes. When the Live View display is cancelled after the elapse of 5 minutes, Live View can be restarted by pressing the U button. If the internal temperature of the camera is high, Live View ends before 5 minutes elapse.
Live View display
(All of the indicators are displayed here for explanatory purposes.)
1 2 3 4 5 6 7 8
9
10 OK
-3 2 1
2000 F2.8
1 2 +3
ISO 3200
15 16 17 18
[1234]
19 20
11
12
13
14
2000 F2.8
21
ISO 400
22
[ 37]
147
1 Capture Mode
2 Flash Mode
3 Drive Mode
4 White Balance
5 Custom Image
6 Multi-exposure/Digital Filter/
HDR Capture/Cross Processing
7 Number of shots using Multiexposure
13 EV Compensation
14 Histogram
15 AE lock
16 Shutter speed
17 Aperture value
18 EV bar
19 Sensitivity
20 Remaining image storage capacity
8 Battery level
9 Temperature warning
10 Change AF point
11 Contrast AF frame
12 Phase Difference AF frame/AF point
21
22
Main face detection frame (Face
Detection AF)
Face detection frame (Face
Detection AF)
* Indicator 12 (Phase Difference AF frame) is displayed in white during
Live View. When the subject is in focus, a green square frame is displayed instead. It turns red when the subject is not in focus. It is not displayed when the focus mode is set to \ .
* Indicators 21 and 22 are displayed when [Autofocus Mode] is set to I and the camera detects person’s face(s). (Up to 16 face recognition frames are displayed on the monitor.)
Available operations
M button Enlarges the image to 2, 4, 6 times (when the focus mode is set to \ , enlarges the image to 2, 4, 6, 8, 10 times).
Use the four-way controller ( 2345 ) to move the display area, and press the | (Green) button to return the display area to the center. (Available only when [Green Button] is assigned to the | (Green) button in [Green Button] of the
[ A
3
Position the subject on the monitor and press the shutter release button halfway.
The autofocus system operates.
When the focus mode is set to \ , turn the focusing ring until the subject is clearly visible on the focusing screen.
4
Press the shutter release button fully.
The picture is taken.
4
148
4
• When [AF Mode] is set to l and [Autofocus Mode] is set to I or i , press the 4 button and use the four-way controller ( 2345 ) to change the AF point. Press the 4 button again to cancel the changing of the AF point. When [Autofocus Mode] is set to S (Phase Difference AF) and
[Select AF Point] is set to S (Select), the AF point can be changed.
• When [AF Mode] is set to k and [Autofocus Mode] is set to I or i , the camera focuses on the center of the screen when auto focusing starts and then automatically tracks the subject when it is in focus.
• Images captured in magnified display are recorded at normal size.
• If [Optical Preview] or [Digital Preview] is assigned to the | (Green) button in [Green Button] of the [ A Rec. Mode 4] menu, you can check the depth of field on the monitor when you press the |
The status screen and control panel cannot be displayed during Live View. To change the settings, press the 3 button and change them in each menu.
Recording Movies
You can record movies with a frame rate (number of frames shot per second) at 24 frames per second (fps), monaural audio, and the file format set to AVI.
Changing the Movie Settings
1
Select [Movie] in the [ A Rec. Mode 3] menu and press the four-way controller ( 5 ).
The [Movie] screen appears.
2
Press the four-way controller ( 5 ) and use the four-way controller
( 23 ) to select the number of recorded pixels.
00:00'00"
Recorded Pixels
Quality Level
Sound
Movie Aperture Control Fixed
Shake Reduction
MENU Cancel OK OK
149
Recorded Pixels
X (default setting)
Y
Pixels
1280×720
640×416
Aspect Ratio
16:9
3:2
3
Press the 4 button.
4
Use the four-way controller ( 23 ) to select [Quality Level].
5
Press the four-way controller ( 5 ) and use the four-way controller ( 23 ) to select the quality level.
Select from C (Best; default setting), D (Better) and E (Good).
When the recorded pixels and quality level are changed, the amount of recordable time at that setting appears at the top right of the screen.
6
Press the 4 button.
7
Use the four-way controller ( 23 ) to select [Sound].
8
Use the four-way controller ( 45 ) to select g or Z .
g : Records sound. (default setting)
Z : Does not record sound.
9
Use the four-way controller ( 23 ) to select [Movie
Aperture Control].
10
Press the four-way controller ( 5 ) and use the four-way controller ( 23 ) to select [Auto] or [Fixed].
Auto: The aperture is controlled automatically. (The aperture value is fixed while recording a movie.)
Fixed: The movie is recorded at the aperture value set before movie recording starts. (default setting)
11
Press the 4 button.
12
Use the four-way controller ( 23 ) to select [Shake
Reduction].
4
150
13
Use the four-way controller ( 45 ) to select k or l .
k : Uses Shake Reduction.
l : Does not use Shake Reduction. (default setting)
14
Press the 3 button twice.
The camera is ready to record a movie.
Recording Movies
1
Set the mode dial to C .
4
Live View for movie recording is displayed.
Sound
Live View can be displayed for up to 5 minutes. When the Live View display is cancelled after the elapse of 5 minutes,
Live View can be restarted by pressing the U button. If the internal temperature of the camera is high, Live View ends before 5 minutes elapse.
F2.8
-2 1 1 +2
00:30'00"
Recordable Time
Shake Reduction
2
Position the subject on the monitor and press the shutter release button halfway.
The autofocus system operates.
When the focus mode is set to \ , turn the focusing ring until the subject is clearly visible on the focusing screen.
3
When [Movie Aperture Control] is set to [Fixed] (p.149), set
the aperture using the e-dial.
4
Press the shutter release button fully.
Recording of the movie starts.
5
Press the shutter release button again.
Recording stops.
151
• When [Sound] is set to g , the camera operation sounds are also recorded.
When recording a movie, mount the camera onto a tripod and do not operate the camera while recording.
• When recording a movie, regardless of the AF mode setting, recording starts when the shutter release button is pressed fully even if the subject is not in focus.
• While recording a movie, the autofocus system does not operate.
• The flash is not available.
4
• You can record movies continuously up to 4 GB or 25 minutes. When the SD
Memory Card is full, recording stops and the movie is saved.
• If you intend to shoot continuously for a long period, use of the AC adapter
kit K-AC84 (optional) is recommended. (p.42)
• You can also use the optional remote control to control recording operations.
• When recording movies, only the White Balance and Custom Image (other than Fine Sharpness) settings can be used.
• The sensitivity is fixed to [AUTO].
• If a high temperature is reached inside the camera during movie recording, the recording may be terminated to protect the camera circuitry.
152
4
Playing Back Movies
Recorded movies can be played back in Playback mode in the same manner as saved images.
1
Press the Q button.
2
Use the four-way controller ( 45 ) to choose a movie to play back.
The first frame of the movie is displayed on the monitor.
3
Press the four-way controller
( 2 ).
Movie playback starts.
Movie 10min00sec 100-0001
Available operations
Four-way controller ( 2 ) e-dial
Four-way controller ( 5 )
Press and hold four-way controller ( 5 )
Four-way controller ( 4 )
Pause/Resume playback
Volume control (6 levels)
Frame advance (when paused)
Fast forward playback while pressed
Reverse playback/
Frame reverse (when paused)
Fast reverse playback while pressed Press and hold four-way controller ( 4 )
Four-way controller ( 3 ) Stop
When the movie ends, playback stops and the first frame is displayed.
You can use the optional AV cable (I-AVC7) to play back recorded movies on
a TV screen or other AV devices. (p.221)
Capturing a Still Picture from a Movie
You can capture a single frame from a movie recorded with the a and save it as a JPEG still picture.
1
Pause the movie in Step 3 of “Playing Back Movies” to
display the frame to save as a still picture.
2
Press the M button.
The save confirmation screen appears.
153
4
3
Use the four-way controller ( 23 ) to select [Save as].
Save as
Cancel
OK OK
4
Press the 4 button.
The captured image is saved as a new image.
154
Memo
5
Using the Flash
This chapter provides details on the built-in flash of the
a
and describes how to take pictures with an external flash.
Flash Characteristics in Each Exposure Mode
.............................................................................. 156
Distance and Aperture when Using the Built-in
Flash .................................................................... 160
Lens Compatibility with the Built-in Flash ....... 161
Using an External Flash (Optional) .................. 162
156
Flash Characteristics in Each
Exposure Mode
Using the Flash in b (Shutter Priority) Mode
• When taking a moving subject, you can use the flash to change the blur effect.
• Any desired shutter speed of 1/180 sec. or slower can be set for taking a flash photograph.
• The aperture value automatically changes according to the ambient brightness.
• The shutter speed is locked at 1/180 sec. when a lens other than a DA,
DA L, D FA, FA J, FA, F or A lens is used.
5
Using the Flash in c (Aperture Priority) Mode
• You can set the desired aperture value to take a flash photograph when you want to change the depth of field or shoot a subject farther away.
• The shutter speed automatically changes with the ambient brightness.
• The shutter speed shifts automatically anywhere from 1/180 sec. to a
slow shutter speed (p.60) that reduces camera shake. The slowest
shutter speed depends on the focal length of the lens in use.
• The shutter speed is locked at 1/180 sec. when a lens other than a DA,
DA L, D FA, FA J, FA or F lens is used.
Using the Slow-speed Sync
You can use Slow-speed Sync in .
(Night Scene Portrait) of Picture mode or b (Shutter Priority) mode when shooting portraits with the sunset in the background. Both the portrait and the background are captured beautifully.
• Slow-speed Sync slows the shutter speed. Use the Shake Reduction function or turn off the Shake Reduction function and use a tripod to avoid camera shake. The picture will also blur if the subject moves.
• Slow-speed Sync shooting can also be performed with an external flash.
Using b Mode
1
Set the mode dial to b .
2
Use the e-dial to set the shutter speed.
The background is not properly exposed if the aperture value is blinking when the shutter speed is set. Adjust the shutter speed so that the aperture value does not blink.
3
Press the K / i button.
The built-in flash pops up.
4
Take a picture.
157
5
Using e / K / c Mode
1
Set the mode dial to e , K or c .
2
Press the K / i button.
The built-in flash pops up.
3
Press the four-way controller ( 3 ).
The [Flash Mode] screen appears.
4
Select G or H and press the 4 button.
The shutter speed is set slower to give the proper exposure for the background.
5
Take a picture.
158
5
Using a Mode
1
Set the mode dial to a .
2
Set the shutter speed and aperture value to obtain the proper exposure.
Set 1/180 sec. shutter speed or slower.
3
Press the K / i button.
The built-in flash pops up.
In a (Manual) mode, you can raise the built-in flash at any time prior to shooting.
4
Take a picture.
Using the Trailing Curtain Sync
Trailing Curtain Sync discharges the flash immediately before the shutter curtain closes. When shooting moving objects with a slow shutter speed,
Trailing Curtain Sync and Slow-speed Sync produce different effects depending on when the flash is discharged.
For example, when shooting a moving car with Trailing Curtain Sync, trailing light is captured while the shutter is open and the flash captures the car immediately before the shutter is closed. Therefore, the picture will include a sharp, well-lit car with trailing lights behind it.
Slow-speed Sync Trailing Curtain Sync
1
Set the mode dial to e , K , b , c or a .
2
Press the four-way controller ( 3 ).
The [Flash Mode] screen appears.
3
Select I or k and press the 4 button.
4
Press the K / i button.
The built-in flash pops up.
5
Take a picture.
Trailing Curtain Sync slows the shutter speed. Use the Shake Reduction function or turn off the Shake Reduction function and use a tripod to avoid camera shake.
159
5
160
Distance and Aperture when Using the Built-in Flash
5
Relationships between the guide number, aperture and distance must be considered when shooting with the flash to obtain the correct exposure.
Calculate and adjust the shooting conditions if the flash output is not sufficient.
ISO Sensitivity
ISO 200
ISO 400
ISO 800
ISO 1600
ISO 3200
ISO 6400
Built-in Flash Guide Number
Approx. 16
Approx. 24
Approx. 32
Approx. 48
Approx. 64
Approx. 96
Calculating Shooting Distance from Aperture Value
The following equation calculates the distance of the flash for aperture values.
Maximum flash distance L1 = Guide number ÷ Aperture value
Minimum flash distance L2 = Maximum flash distance ÷ 5*
* The value 5 used in the formula above is a fixed value which applies only when using the built-in flash alone.
Example)
When the sensitivity is ISO 200 and the aperture value is F4.0
L1 = 16 ÷ 4.0 = approx. 4 (m)
L2 = 4 ÷ 5 = approx. 0.8 (m)
Therefore, the flash can be used in a range of about 0.8 m to 4 m.
However, the built-in flash in this camera cannot be used when the distance is 0.7 m or less. When the flash is used at closer than 0.7 m, it causes vignetting in the picture corners, the light is distributed unevenly and the picture may be overexposed.
Calculating Aperture Value from Shooting Distance
The following equation calculates the aperture value for shooting distances.
Aperture value F = Guide number ÷ Shooting distance
Example)
When the sensitivity is ISO 200 and the shooting distance is 5 m, the aperture value is:
F = 16 ÷ 5 = 3.2
If the resulting number (3.2, in the above example) is not available as a lens aperture, the smaller number that is closest (2.8, in the above example) is generally used.
Lens Compatibility with the Built-in
Flash
161
Depending on the lens used with the a , even if a lens without a hood is attached, the use of the built-in flash may not be available or may be limited due to vignetting.
DA, DA L, D FA, FA J, and FA lenses not listed below can be used without problems.
* The following lenses were evaluated without a hood.
Unavailable due to vignetting
Lens Name
DA FISH-EYE 10-17mm F3.5-4.5ED (IF)
DA12-24mm F4ED AL
DA14mm F2.8ED (IF)
FA 300mm F2.8ED (IF)
FA
600mm F4ED (IF)
FA
250-600mm F5.6ED (IF)
5
Available depending on other factors
Lens Name
F FISH-EYE 17-28mm F3.5-4.5
DA16-45mm F4ED AL
DA
16-50mm F2.8ED AL (IF) SDM
DA17-70mm F4AL (IF) SDM
DA18-250mm F3.5-6.3ED AL (IF)
FA
28-70mm F2.8AL
FA SOFT 28mm F2.8
FA SOFT 85mm F2.8
Restrictions
Vignetting may occur if the focal length is less than 20 mm.
When the focal length is less than 28 mm or when the focal length is 28 mm and the shooting distance is 1 m or less, vignetting may occur.
When the focal length is 20 mm or less or when the focal length is 35 mm and the shooting distance is less than 1.5 m, vignetting may occur.
When the focal length is less than 24 mm or when the focal length is 24 mm and the shooting distance is 1 m or less, vignetting may occur.
Vignetting may occur if the focal length is less than 35 mm.
Vignetting may occur if the focal length is 28 mm and the shooting distance is less than 1 m.
Built-in flash always discharges fully.
Built-in flash always discharges fully.
162
Using an External Flash (Optional)
5
Using the optional external flash AF540FGZ, AF360FGZ, AF200FG or
AF160FC enables a variety of flash modes, such as P-TTL auto flash mode, depending on the external flash being used. See the chart below for details.
( z : Available #: Restricted × : Not available)
Flash
Built-in
Flash
AF540FGZ
AF360FGZ
Camera Function
Red-eye reduction flash
Auto flash discharge
After the flash is charged, the camera automatically switches to the flash sync speed.
Aperture value is automatically set in e mode and b mode.
Auto check in the viewfinder
P-TTL auto flash
Slow-speed Sync
Flash exposure compensation
AF assist light of external flash
Trailing Curtain Sync
Contrast-control-sync flash mode
Slave flash
Multiple flash
High-speed flash sync
Wireless flash z z z z
× z
z z
× z
#
×
×
×
#
z z z z
× z
z z z z z z
× z z
AF200FG
AF160FC z z z z
×
z z
×
×
#
×
×
×
×
*1 Available only when using a DA, DA L, D FA, FA J, FA, F or A lens.
*2 Shutter speed of 1/90 sec. or slower.
*3 When combined with the AF540FGZ or AF360FGZ, 1/3 of the flash discharge can be output by the built-in flash and 2/3 can be output by the external flash.
*4 Available only when combined with the AF540FGZ or AF360FGZ.
*5 Multiple AF540FGZ or AF360FGZ units, or a combination of an AF540FGZ or AF360FGZ unit and the built-in flash is required.
Flashes with reversed polarity (the center contact on the hot shoe is minus) cannot be used due to the risk of damaging the camera or flash.
163
About the Display Panel for AF360FGZ
The AF360FGZ itself does not have the function to set the FORMAT size to [DIGITAL]. However, when it is used with a SLR Digital
Camera, the difference in focal length between a 35 mm camera and the a is automatically calculated based on the difference in angle of view and is displayed on the panel (when using DA, DA L, D FA,
FA J, FA or F lens).
The conversion indicator appears and the format size indicator disappears when the exposure metering timer of the a is on (it returns to 35 mm format display when the exposure metering timer is turned off).
Lens Focal Length
Exposure metering timer Off
Exposure metering timer On
85mm
/77mm
50mm 35mm
28mm
/24mm
20mm 18 mm
85mm 70mm 50mm 35mm 28mm 24mm *
58mm 48mm 34mm 24mm 19mm 16mm *
* Using wide-angle panel
5
Using P-TTL Auto Mode
You can use [P-TTL Auto] with the AF540FGZ, AF360FGZ, AF200FG or
AF160FC flash unit. The flash pre-flashes before the actual flash and confirms the subject (the distance, brightness, contrast, whether it is backlit, etc.) using the camera 16-segment metering sensor. The flash output for the actual flash is adjusted based on the information obtained from the pre-flash, enabling flash photography with more accurate exposure for the subject than with normal TTL auto.
1
Remove the cover of the hot shoe and attach the external flash.
2
Turn on the camera and the external flash.
3
Set the external flash mode to [P-TTL auto].
164
4
Confirm that the external flash is fully charged and then take a picture.
• P-TTL auto is only available with an AF540FGZ, AF360FGZ, AF200FG or
AF160FC flash unit.
• The b will light in the viewfinder when the flash is ready (fully charged).
• For details such as operation method and effective distance, please refer to the external flash manual.
• The flash does not discharge if the subject is bright enough when the flash mode is set to C or i . Therefore, it may not be suitable for daylight-sync shooting.
• Never press the K / i button when any external flash unit is attached to the camera. The built-in flash will hit the external flash. If you want to use both at once, set the wireless mode or connect them using the extension cord.
5
Using High-Speed Flash Sync Mode
With the AF540FGZ or AF360FGZ, you can discharge the flash to take a picture at a shutter speed faster than 1/180 seconds.
1
Remove the cover of the hot shoe and attach the external flash (AF540FGZ or AF360FGZ) to the camera.
2
Set the mode dial to b or a .
3
Turn on the camera and the external flash.
4
Set the external flash sync mode to HS b (high-speed flash sync).
5
Confirm that the external flash is fully charged and then take a picture.
• The b will light in the viewfinder when the flash is ready (fully charged).
• High-speed flash sync is available only when the shutter speed is set faster than 1/180 sec.
• High-speed flash sync is not available when the shutter speed is set to h .
165
Using Flash in Wireless Mode
By using two external flashes (AF540FGZ or AF360FGZ) or using the built-in flash with one or more external flashes, you can shoot in P-TTL flash mode without connecting the flash units with a cord.
• Set the power switch of the external flash to WIRELESS.
• Two or more AF540FGZ/AF360FGZ external flashes are required to use high-speed flash sync in the wireless mode. This function cannot be used in combination with the built-in flash.
• Set the wireless mode of the external flash not directly connected to the camera to SLAVE.
Setting the Channel for the External Flash
First, set the channel for the external flash unit.
1
Set the channel for the external flash unit.
2
Remove the cover of the hot shoe and attach the external flash.
3
Turn on the camera and the external flash, and press the shutter release button halfway.
The built-in flash is set to the same channel as the external flash unit.
• When set to r mode, the channel currently set for the built-in flash is displayed in the viewfinder for 10 seconds.
• Be sure to set all the flashes to the same channel. Refer to the manual of
AF540FGZ or AF360FGZ for details on how to set the channel on the external flash.
5
166
Using the Built-in Flash in Wireless Mode
Set the camera to wireless flash mode when using an external flash in combination with the built-in flash.
1
Press the four-way controller ( 3 ).
The [Flash Mode] screen appears.
2
Select r and press the 4 button.
The camera is ready to take a picture.
Flash Mode
Wireless Mode
5
0.0
MENU Cancel OK OK
When the drive mode is set to i (Remote Control (3s delay)) or the lens aperture is not set to the s position, r cannot be selected.
Changing the Built-in Flash Discharge Method
You can change the built-in flash discharge method used in wireless mode.
Set in [17. Flash in Wireless Mode] of the [
A Custom Setting 3] menu
1
2
On
Off
Discharges the built-in flash as a master. (default setting)
Discharges the built-in flash as a control flash.
HS b (High-speed flash sync) is not available with the built-in flash.
Wireless Shooting
Using a Combination of the Built-in Flash and an External Flash
Unit
1
Remove the external flash unit after the channel is set on the camera, and place it at the desired location.
2
Set the camera flash to r mode, and press the K / i button.
3
Confirm that both flashes are fully charged and then take a picture.
167
Using a Combination of External Flash Units
1
Set the wireless mode of the external flash directly connected to the camera to [MASTER] or [CONTROL].
MASTER
CONTROL
Sets the camera to discharge both the flash directly connected to the camera and the wireless flash unit.
Sets the camera to discharge the flash directly connected to the camera as a control flash only, not as the main flash.
2
On the wireless remote flash unit, set the wireless flash mode to [SLAVE] and set the channel to the same channel as the flash directly connected to the camera. Then, place it at the desired location.
3
Confirm that both flashes are fully charged and then take a picture.
• The Shake Reduction function is automatically turned off in wireless mode.
• When using multiple AF540FGZ/AF360FGZ external flashes and performing high-speed flash sync shooting in wireless mode, set the flash directly connected to the camera to high-speed flash sync mode.
5
168
5
Wireless Flash Control (P-TTL Flash Mode)
When using external flash units (AF540FGZ or AF360FGZ) for wireless shooting, the following information is exchanged between the flash units before the flash is discharged.
Press the shutter release button fully.
È
1 The flash directly connected to the camera emits a control flash
(relays the flash mode of the camera).
2 The wireless remote flash emits a test flash (relays confirmation of subject).
3 The flash directly connected to the camera emits a control flash
(relays flash output to the wireless remote flash).
* The flash directly connected to the camera will emit a control flash one more time after this to relay the flash duration time when HS b (Highspeed sync) is set.
4 The wireless remote flash discharges at the same time as the main flash.
When the wireless mode of the external flash directly connected to the
camera is set to [MASTER] or [17. Flash in Wireless Mode] (p.166) is set
to [On] for the built-in flash, all the flashes will discharge simultaneously.
Red-Eye Reduction
As with the built-in flash, the red-eye reduction function is available with an external flash. This may not be available on some flashes or may have
restrictions for usage conditions. Refer to the chart on p.162.
• The red-eye reduction function works even when only an external flash is
• If the red-eye reduction function of the built-in flash is used when the external flash is set as the slave unit or with the wireless function, the pre-flash for redeye reduction will trigger the external flash. Do not use the red-eye reduction function when using a slave unit.
169
Trailing Curtain Sync
When using the built-in flash with an external flash (AF540FGZ or
AF360FGZ) that is set to the Trailing Curtain Sync mode, the built-in flash will also use this mode. Confirm that both flash units are fully charged before shooting.
Connecting an External Flash with an
Extension Cord
When using the built-in flash with an external flash that does not have a wireless flash mode function such as AF200FG, attach the Hot Shoe
Adapter F
G
(optional) to the camera hot shoe and an Off-Camera Shoe
Adapter F (optional) to the bottom of the external flash, and connect these with the Extension Cord F5P (optional) as shown in the illustration below.
The Off-Camera Shoe Adapter F can be mounted to your tripod using the tripod screw.
Only a P-TTL auto flash can be used in combination with the built-in flash.
When combining with the built-in flash
5
170
Multiple Flash Shooting Using Extension
Cords
You can combine two or more external flashes (AF540FGZ, AF360FGZ or
AF200FG) or you can use two or more external flashes in combination with the built-in flash. You can use the extension cord connection terminal on the flash to connect the AF540FGZ. You can connect AF360FGZ or
AF200FG units as shown in the illustration below. Connect an external flash and the Hot Shoe Adapter F (optional) to the Off-Camera Shoe
Adapter F (optional) and then connect another Off-Camera Shoe Adapter
F with external flash using the Extension Cord F5P (optional).
Refer to the manual of the external flash for details.
When combining two or more external flashes
5
• Do not combine with accessories that have a different number of contacts such as a Hot Shoe Grip as a malfunction may occur.
• Combining with flashes from other manufacturers may cause equipment breakdown. We recommend using the AF540FGZ, AF360FGZ or AF200FG.
When using multiple external flashes or using an external flash with the built-in flash, P-TTL is used for flash control.
171
Contrast-Control-Sync Flash
Combining two or more external flashes (AF540FGZ, AF360FGZ or
AF200FG) or using an external flash in combination with the built-in flash allows multiple flash photography (contrast-control-sync flash photography). This is based on the difference between the amounts of light discharged from multiple units.
• The AF200FG must be combined with the AF540FGZ or AF360FGZ.
• Do not combine with accessories that have a different number of contacts, such as a Hot Shoe Grip, as a malfunction may occur.
• Combining with flashes from other manufacturers may cause equipment breakdown. We recommend using PENTAX automatic flashes.
1
Connect the external flash to the camera indirectly.
2
Set the sync mode for the external flash to contrastcontrol-sync mode.
3
Set the mode dial to e , b , c or a .
4
Confirm that both the external flash and built-in flash are fully charged and then take a picture.
5
• When using two or more external flashes and the contrast-control-sync mode is set on the external master flash unit, the flash output ratio is 2 (master unit) : 1 (slave units). When an external flash is used in combination with the built-in flash, the flash output ratio is 2 (external flash) : 1 (built-in flash).
• When using multiple external flashes or using an external flash with the builtin flash, P-TTL is used for flash control.
172
Memo
6
Shooting Settings
This chapter describes how to set the save format for pictures taken and other settings.
Setting the File Format ...................................... 174
Setting the Green Button Function .................. 179
Setting the White Balance .................................. 182
Correcting Images .............................................. 189
Setting the Image Finishing Tone ..................... 194
174
Setting the File Format
6
Setting the JPEG Recorded Pixels
You can select the number of recorded pixels from E , J , P and i .
The more pixels there are, the larger the picture and the bigger the file size. The file size will also differ according to the [JPEG Quality] setting.
The default setting is E .
Recorded Pixels
E
J
P i
Pixels
4288×2848
3936×2624
3072×2048
1728×1152
Paper Size
14"×17" / A2 paper
10"×12" / A3 paper
8"×10" / A4 paper
5"×7" / A5 paper
The paper sizes above are references for optimal printing by recorded pixels. The quality of the captured photo or printed picture depends on the quality level, exposure control, resolution of the printer and a variety of other factors.
1
Press the M button in the status screen.
The control panel appears.
Press the M button when the status screen is not displayed.
2
Use the four-way controller
( 2345 ) to select [JPEG
Recorded Pixels] and press the
4 button.
JPEG Recorded Pixels
12M
AF.A
HDR
OFF
The [JPEG Recorded Pixels] screen appears.
JPEG 12
M
10/10/’09 10:30AM [ 37 ]
3
Use the four-way controller
( 45 ) to select the number of recorded pixels.
When the number of recorded pixels is changed, the number of recordable images appears at the top right of the screen.
4
Press the 4 button.
The camera returns to the control panel.
JPEG Recorded Pixels
12
M
10
M
6
M
2
M
MENU Cancel
128
OK OK
You can also change the setting from the [ A
175
Setting the JPEG Quality Level
You can set the image quality level. The file size will also differ according to the [JPEG Recorded Pixels] setting. The default setting is C (Best).
Images will be clearer but file size will be larger.
C
D
E
Best
Better
Good Images will be grainier but file size will be smaller.
1
Press the M button in the status screen.
The control panel appears.
Press the M button when the status screen is not displayed.
6
176
6
2
Use the four-way controller
( 2345 ) to select [JPEG
Quality] and press the 4 button.
The [JPEG Quality] screen appears.
JPEG Quality
HDR
OFF
JPEG
AF.A
12
M
10/10/’09 10:30AM [ 37 ]
3
Use the four-way controller
( 45 ) to select a quality level.
When the quality level is changed, the number of recordable images at that quality level appears at the top right of the screen.
JPEG Quality
MENU Cancel
128
OK OK
4
Press the 4 button.
The camera returns to the control panel.
You can also change the setting from the [ A
177
Setting the File Format
You can set the format of image files.
JPEG
RAW
RAW+
Captures images in JPEG format. You can change the number of recorded pixels in [JPEG Recorded Pixels], and the image quality level in [JPEG Quality]. The file size varies according to the settings. (default setting)
RAW data is CMOS sensor output data saved without processing.
Effects of White Balance, Custom Image and Color Space are not applied to the images, but they are saved as actual original information.
When you perform the development process by using RAW
Development function (p.233), or using the provided software (PENTAX
Digital Camera Utility 4) after transferring RAW data to a computer, you can create JPEG images with these effects.
Images are saved in both RAW and JPEG formats. When [RAW Button
Function] is assigned to the | (Green) button, you can press the | button to temporarily change the file format and save the image in both
When Digital Filter (p.140), HDR Capture (p.191) or Cross Processing (p.196)
is set, the file format is fixed to [JPEG] and cannot be changed. To change the file format, turn these functions off.
1
Press the M button in the status screen.
The control panel appears.
Press the M button when the status screen is not displayed.
2
Use the four-way controller
( 2345 ) to select [File Format] and press the 4 button.
File Format
JPEG
HDR
OFF
The [File Format] screen appears.
AF.A
JPEG 12
M
10/10/’09 10:30AM [ 37 ]
6
178
3
Use the four-way controller
( 45 ) to select a file format.
When the file format is changed, the number of recordable images appears at the top right of the screen.
File Format
JPEG RAW RAW+
128
MENU Cancel OK OK
4
Press the 4 button.
The camera returns to the control panel.
• You can also change the setting from the [ A
• The file format is fixed to [JPEG] in n (Stage Lighting) or l (Night Snap) of
H (Scene) mode.
6
Setting the RAW File Format
You can select PEF or DNG format in [RAW
File Format] of the [ A Rec. Mode 3] menu
(p.79) when capturing images in RAW format.
1 2 3 4
Movie
Live View
Status Screen
Instant Review
Color Space
RAW File Format
MENU Cancel
1sec.
sRGB
PEF
DNG
OK OK
PEF PENTAX’s original RAW file format (default setting)
DNG
General-purpose, publicly available RAW file format designed by Adobe
Systems
Setting the Green Button Function
179
You can assign one of the following functions to the | (Green) button and access the function by simply pressing the button while shooting.
Green Button
Custom Image
Optical Preview
Digital Preview
Digital Filter
RAW Button
Function
Center AF Point
Resets the values being adjusted. (default setting)
Sets the Custom Image settings. (p.194)
Displays the Optical Preview. (p.126)
Displays the Digital Preview. You can set whether or not to display the histogram and Bright/Dark Area warning during
Displays the digital filter. (p.140)
Temporarily changes the file format. By default, simultaneously saves the image in both JPEG and RAW format, regardless of the [File Format] setting. You can select whether the setting applies to only one image and the
file format when the button is pressed. (p.180)
Returns AF point to the center of the AF frame if [Select AF
Point] is set to S (Select) and the AF point has been
1
Select [Green Button] in the
[ A Rec. Mode 4] menu and press the four-way controller ( 5 ).
The [Green Button] screen appears.
1 2 3 4
Green Button
Memory
Shake Reduction
Input Focal Length 35mm
6
2
Press the four-way controller
( 5 ).
MENU Exit
Green Button
Green Button
Action in M Mode e-dial in Program
P LINE
P SHIFT
MENU
180
3
Use the four-way controller
( 23 ) to select a function to assign to the | button, and press the 4 button.
Green Button
RAW
Green Button
Custom Image
Optical Preview
Digital Preview
Digital Filter
RAW Button Function
Center AF Point
MENU Cancel OK OK
4
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
6
Setting the RAW Button Function
When [RAW Button Function] is assigned to the | button, specify the function settings.
1
Select [RAW Button Function] in Step 3 of “Setting the
Green Button Function”.
2
Use the four-way controller ( 23 ) to select [Cancel after 1 shot].
3
Use the four-way controller
( 45 ) to select O or P .
Green Button
RAW RAW Button Function
Cancel after 1 shot
JPEG
RAW
RAW+
RAW+
RAW+
RAW+
MENU
O
P
The recording format returns to the original file format after a picture is taken. (default setting)
The setting is canceled when the following operations are performed.
- The | button is pressed again
- The Q button or 3 button is pressed
- The main switch is turned off
- The mode dial is turned
4
Use the four-way controller ( 23 ) to choose a file format.
The left side is the [File Format] setting and the right side is the file format when the | button is pressed.
5
Press the four-way controller ( 5 ), and use the four-way controller
( 23 ) to select a file format when the | button is pressed.
Green Button
RAW RAW Button Function
Cancel after 1 shot
JPEG
RAW
RAW+
RAW+
RAW+
RAW+
MENU Cancel OK OK
6
Press the 4 button.
7
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
181
6
182
Setting the White Balance
6
White balance is the function for adjusting the color of an image so that white objects appear white. Set the white balance if you are not satisfied with the color balance of pictures taken with white balance set to F
(Auto), or to intentionally apply a creative effect to your images.
F
G
H
^
J
I
L
CTE
K
Item
Auto
Daylight
Shade
Cloudy
Fluorescent
Light
Tungsten
Light
Flash
Manual
Settings
Automatically adjusts the white balance.
(default setting)
Color
Temperature
Approx. 4,000 to 8,000K
For use when taking pictures in sunlight. Approx. 5,200K
For use when taking pictures in the shade. It reduces the bluish color tones in a picture.
For use when taking pictures on cloudy days.
Approx. 8,000K
Approx. 6,000K
For use when taking pictures under fluorescent lighting. Select the type of fluorescent light.
D Fluorescent Light Daylight Color
N Fluorescent Light Daylight White
W Fluorescent Light Cool White
L Fluorescent Light Warm White
For use when taking pictures under light bulb or other tungsten light. It reduces the reddish color tones in a picture.
For use when taking pictures using the built-in flash.
Use this to keep and strengthen the color tone of the light source in the image.
Use this to manually adjust the white balance according to the lighting so that white objects appear as a natural white.
Approx. 6,500K
Approx. 5,000K
Approx. 4,200K
Approx. 3,000K
Approx. 2,850K
Approx. 5,400K
–
–
*1 The color temperature (K) is an estimate. This does not indicate precise colors.
*2 CTE= Color Temperature Enhancement
1
Set the mode dial to e , K , b , c , or a .
2
Press the four-way controller ( 4 ) in Capture mode.
The [White Balance] screen appears.
3
Press the four-way controller
( 23 ) to select the white balance.
White Balance
Auto
183
CTE
MENU Cancel Check
INFO
OK OK
Available operations m c button
M button
You can use Digital Preview to preview the background image with the setting applied.
Saves the background image. Select [Save as] and press the 4 button.
4
Press the 4 button.
The camera is ready to take a picture.
• White balance cannot be adjusted when Capture mode is set to Picture mode or H (Scene) mode, or when Cross Processing is set.
• Because the light source changes when a flash discharges, you can set the white balance for when the flash discharges. Select [Auto White Balance],
[Unchanged] or [Flash] in [8. WB When Using Flash] of the [
A Custom
6
184
Color Temperature
The color of light shifts towards blue as the color temperature rises, and towards red as the color temperature falls. Color temperature describes this change in light color in terms of absolute temperature
(K: Kelvin). This camera is capable of setting the white balance to enable taking pictures with natural coloring under a variety of lighting conditions.
Red tint Blue tint
2000 3000 4000 5000 6000 8000 10000 12000 [ K ]
6
Adjusting the White Balance Manually
You can adjust the white balance depending on the light source when taking pictures. With the manual white balance, the camera can store delicate shades that cannot be precisely adjusted with the white balance preset values provided in the camera. This provides the optimum white balance for your surroundings.
White Balance
Manual
185
1
Select K
press the four-way controller
( 5 ).
CTE
MENU Cancel Check OK OK
2
Under the light to measure the white balance, fully display a white sheet of paper in the viewfinder or select a white area as the subject.
3
Press the shutter release button fully.
Set the focus mode lever to \ when the shutter cannot be released.
The screen to select the measuring range is displayed.
4
Use the e-dial to select the entire screen or spot area for the measuring range.
6
OK OK
5
When a spot area is selected, use the four-way controller ( 2345 ) to move the frame to the position you want to measure.
MENU Cancel
MENU Cancel OK OK
186
6
Press the 4 button.
The white balance fine-tuning screen appears when measuring is completed.
Adjust the white balance as necessary.
Manual
White Balance
SHUTTER Adjust
±0 ±0
±0
MENU Cancel
7
Press the 4 button.
The camera returns to the [White Balance] screen.
8
Press the 4 button.
The camera is ready to take a picture.
Check
INFO
OK OK
6
• No image is recorded when the shutter release button is pressed to adjust the white balance.
• The message [The operation could not be completed correctly] appears when measuring is unsuccessful. Press the 4 button while displayed to remeasure the white balance.
• If the picture is extremely overexposed or underexposed, the white balance may not be adjusted. In this case, adjust to the proper exposure before adjusting the white balance.
• When the mode dial is set to C (Movie), the white balance cannot be measured. Adjust the white balance in any capture mode other than C before recording a movie.
Fine-Tuning the White Balance
You can fine-tune the white balance settings.
1
Perform the desired setting in Step 3 on p.183.
2
Press the four-way controller ( 5 ).
The fine-tuning screen appears.
3
Fine-tune the white balance.
Seven levels (225 patterns) are available on the G-M and B-A axes.
Shade
G1 ±0
±0
MENU Cancel Check OK OK
Available operations
Four-way controller ( 23 )
Four-way controller ( 45 )
| (Green) button
Adjusts the tone of the colors between green (G) and magenta (M).
Adjusts the tone of the colors between blue (B) and amber (A).
Resets the adjustment value. (Available only when [Green Button] is assigned to |
(Green) button in [Green Button] of the [ A
4
Press the 4 button.
The camera returns to the [White Balance] screen.
5
Press the 4 button.
The camera is ready to take a picture.
When set to K , the white balance can also be measured in the fine-tuning screen by pressing the shutter release button fully (except while recording a movie).
187
6
Setting the Color Space
You can set the color space to use.
sRGB Sets to sRGB color space. (default setting)
AdobeRGB Sets to AdobeRGB color space.
188
Set [Color Space] in the [ A Rec. Mode 3]
1 2 3 4
Movie
Live View
Status Screen
Instant Review
Color Space
RAW File Format
MENU Cancel
1sec.
sRGB
AdobeRGB
OK OK
File names differ depending on the color space setting as shown below.
For sRGB: IMGPxxxx.JPG
For AdobeRGB: _IGPxxxx.JPG
“xxxx” indicates the file number. This is displayed as a four-digit sequential
6
Color Space
Color ranges for various input/output devices, such as digital cameras, monitors, and printers, differ. This color range is called the
Color Space.
To recreate different color spaces in different devices, standard color spaces have been proposed. This camera supports sRGB and
AdobeRGB.
sRGB is mainly used for devices such as a computer.
AdobeRGB covers a wider range of color than sRGB and is used for occupational uses such as industrial printing.
An image created in AdobeRGB may appear lighter than an image created in sRGB when output from an sRGB compatible device.
Correcting Images
189
The camera and lens properties can be automatically adjusted when taking pictures.
Adjusting the Brightness
Adjusts the brightness and prevents bright and dark areas from occurring.
Highlight Correction
Expands the dynamic range and the light level expressed by the CMOS sensor and prevents bright areas from occurring.
1
Press the M button in the status screen.
The control panel appears.
Press the M button when the status screen is not displayed.
2
Use the four-way controller ( 2345 ) to select [Highlight
Correction] and press the 4 button.
The [Highlight Correction] screen appears.
3
Use the four-way controller ( 45 ) to select [Off] or [On].
Highlight Correction
Off
6
DR
200
OK OK
4
Press the 4 button.
The camera returns to the control panel.
MENU Cancel
190
• When [Highlight Correction] is set to [On], the minimum sensitivity is set to
ISO 400. If [3. Expanded Sensitivity] in the [
A
is set to [On], the sensitivity is set to ISO 200.
• When Capture mode is set to n (Stage Lighting) or l (Night Snap) of H
(Scene) mode, [Highlight Correction] is fixed to [On].
6
Shadow Correction
Expands the dynamic range and the light level expressed by the CMOS sensor and prevents dark areas from occurring.
1
Press the M button in the status screen.
The control panel appears.
Press the M button when the status screen is not displayed.
2
Use the four-way controller ( 2345 ) to select [Shadow
Correction] and press the 4 button.
The [Shadow Correction] screen appears.
3
Use the four-way controller ( 45 ) to select [Off], [Low], [Medium] or
[High].
Shadow Correction
Off
MENU Cancel OK OK
4
Press the 4 button.
The camera returns to the control panel.
You can also set Highlight Correction and Shadow Correction in [D-Range
Setting] of the [ A
191
HDR Capture
Enables capturing images at high dynamic range. Takes three frames
(underexposed, standard (proper exposure) and overexposed) to create a single composite image with them.
1
Press the M button in the status screen.
The control panel appears.
Press the M button when the status screen is not displayed.
2
Use the four-way controller ( 2345 ) to select [HDR
Capture] and press the 4 button.
The [HDR Capture] screen appears.
3
Use the four-way controller ( 45 ) to select [Off], [Standard] or
[Strong].
HDR Capture
Off
HDR
OFF
HDR
1
HDR
2
6
MENU Cancel OK OK
4
Press the 4 button.
The camera returns to the control panel.
• When HDR Capture is set, the file format is always set to [JPEG] and cannot be changed. You cannot use HDR Capture when the file format is set to
[RAW].
• When HDR Capture is set, Multi-exposure is not available. Also, the drive modes other than 9 (Single Frame Shooting) and h (Remote Control) are not available.
• HDR Capture cannot be used with Cross Processing or Digital Filter at the same time. The mode set last is used.
• You cannot use HDR Capture when the shutter speed is set to h .
• During HDR Capture, multiple frames are combined together to create a single image, so it will take time to save an image.
• During HDR Capture, pressing the 3 button while an image is being saved cancels the process and saves the image as a standard image.
• The Shake Reduction function is automatically turned off when HDR Capture is set. In this case, use a tripod to prevent camera shake.
192
You can also change the setting from the [ A
Lens Correction
Reduces distortions and lateral chromatic aberrations occurring due to lens properties.
Distortion
Distortion is the phenomenon in which the center of the image appears inflated (barrel distortion) or the center of the image appears pinched
(pincushion distortion). Distortion occurs more easily when using a zoom lens or a lens with a small aperture, and straight walls or the horizon in the image appear curved.
6
Pincushion distortion Barrel distortion
Lateral chromatic aberration
Lateral chromatic aberration is the phenomenon in which the magnification of the image varies according to the colors (wavelengths of light) when a picture was taken, and may cause a blurred image.
Chromatic aberration occurs more easily at shorter focal lengths.
193
• Corrections can only be made when using a DA, DA L or D FA lens.
[Distortion Correction] and [Lat-Chromatic-Ab Adj] cannot be selected when an incompatible lens is attached.
• [Distortion Correction] is disabled when using a DA FISH-EYE 10-17mm.
• The Lens Correction function is disabled when using an accessory such as a close-up ring or rear converter that is attached between the camera and the lens.
• The shooting speed for continuous shooting may be slower when the Lens
Correction function is activated.
• The effects of Lens Correction function may be barely noticeable in some cases due to the shooting conditions or other factors.
1
Press the M button in the status screen.
The control panel appears.
Press the M button when the status screen is not displayed.
2
Use the four-way controller ( 2345 ) to select [Distortion
Correction] or [Lat-Chromatic-Ab Adj] and press the 4 button.
The [Distortion Correction] or [Lat-Chromatic-Ab Adj] screen appears.
3
Use the four-way controller ( 45 ) to select [Off] or [On].
Distortion Correction
Off
6
MENU Cancel OK OK
4
Press the 4 button.
The camera returns to the control panel.
• When a compatible lens is attached and the file format is set to [RAW] or
[RAW+], the correction information is saved as a RAW file parameter and you
can select [On] or [Off] when developing the RAW images. (p.236)
• You can also set [Distortion Correction] and [Lat-Chromatic-Ab Adj] in [Lens
Correction] of the [ A
194
Setting the Image Finishing Tone
6
Setting Custom Image
You can set the image finishing tone before shooting when the capture mode is set to e (Program), K (Sensitivity Priority), b (Shutter Priority), c (Aperture Priority) or a (Manual).
Select from the following seven modes for Image Tone: Bright (default setting), Natural, Portrait, Landscape, Vibrant, Muted and Monochrome.
You can adjust the following items for Image Tone.
Saturation
Hue
Item
High/Low Key Adj
Contrast
Sharpness
Filter Effect
Toning
Settings
Sets the color saturation. (Available settings: -4 to +4)
Sets the color. (Available settings: -4 to +4)
Changes the brightness of the image. (Available settings: -4 to +4)
Sets the image contrast. (Available settings: -4 to +4)
Sets the sharpness of the image outlines. (Available settings:
-4 to +4)
Changes the contrast to appear as if a B&W color filter was used. Sets the filter color. (Available settings: [None],
[Green], [Yellow], [Orange], [Red], [Magenta], [Blue], [Cyan],
[Infrared Filter])
Sets the level for cold tone adjustment (- direction) and warm tone adjustment (+ direction). (Available settings: -4 to +4)
*1 This can be set when any mode other than [Monochrome] is selected.
*2 You can also change the setting to [Fine Sharpness], which makes image outlines even thinner and sharper.
*3 This can be set when [Monochrome] is selected.
Custom Image cannot be used when Cross Processing is set.
1
Press the M button in the status screen.
The control panel appears.
Press the M button when the status screen is not displayed.
2
Use the four way controller
( 2345 ) to select a custom image and press the 4 button.
The [Custom Image] screen appears.
After the power is turned on, the last image taken is displayed in the background.
3
Use the four-way controller ( 45 ) to select an image tone.
Custom Image
Bright
HDR
OFF
AF.A
JPEG 12
M
10/10/’09 10:30AM [ 37 ]
195
MENU Cancel
INFO
Check OK OK
4
Use the four-way controller ( 23 ) to choose an item you want to change.
When Image Tone is set to
[Monochrome], you can change the settings for Filter Effect, Toning, Contrast, and Sharpness.
MENU Cancel
INFO
Check OK OK
6
196
6
5
Use the four-way controller ( 45 ) to change the setting.
The background image changes according to the settings.
You can visually check the saturation and hue with the radar chart. (This is not displayed when Image Tone is set to [Monochrome].)
Available operations e-dial
| (Green) button
M button
Switches between [Sharpness] and [Fine
Sharpness]. When set to [Fine Sharpness], image outlines can be captured with more detail.
Resets the set value. (Available only when [Green
Button] is assigned to the | (Green) button in
[Green Button] of the [ A Rec. Mode 4] menu
Saves the background image. Select [Save as] and press the 4 button. (Not available during Live
View.)
6
Press the 4 button.
The camera returns to the control panel.
You can also change the settings from the [ A
Setting Cross Processing
Cross processing is the procedure of deliberately processing a film in the wrong type of chemicals to create an image with different colors and contrast. This camera features digital cross processing, which is done internally.
1
Press the M button in the status screen.
The control panel appears.
Press the M button when the status screen is not displayed.
2
Use the four-way controller ( 2345 ) to select [Cross
Processing] and press the 4 button.
The [Cross Processing] screen appears.
3
Use the four-way controller ( 45 ) to select [Off] or [On].
Cross Processing
Off
197
MENU Cancel OK OK
4
Press the 4 button.
The camera returns to the control panel.
• When Cross Processing is set, the file format is fixed to [JPEG] and cannot be changed. When the file format is set to [RAW], Cross Processing cannot be selected.
• When Cross Processing is set, Multi-exposure cannot be selected.
• Cross Processing and HDR Capture cannot be used at the same time. The function set last is used.
• When Cross Processing is set, settings for Custom Image and White Balance cannot be changed.
6
You can also change the setting from the [ A
198
Memo
7
Playback Functions
This chapter describes how to use the various playback functions in Playback mode.
Playback Functions Operation ......................... 200
Enlarging Images ............................................... 202
Displaying Multiple Images ............................... 204
Slideshow ........................................................... 210
Rotating Images ................................................. 213
Comparing Images ............................................. 214
Deleting Multiple Images ................................... 215
Protecting Images from Deletion (Protect) ...... 219
Connecting the Camera to an AV Device ......... 221
200
Playback Functions Operation
Perform settings related to playing back images in the playback mode palette or [ Q Playback] menu.
For details on how to operate the menus, see “Using the Menus” (p.35).
Playback Mode Palette Setting Items
Press the four-way controller ( 3 ) in
Playback mode to display the playback mode palette.
You can display the playback mode palette even when a movie is paused.
7
Slideshow s
D
Item
Image Rotation
Digital Filter
*1 n Resize
*1 o Cropping u Slideshow h RAW Development
*2
Plays a slideshow with all captured images
MENU Cancel OK OK
Rotates images.
Function
Changes the color tone of images, adds softening and slimming effects, or adjusts the brightness.
Changes the number of recorded pixels and quality level and saves it as a new image.
Cuts out only the desired area of the picture and saves it as a new image.
Page
Plays back the images one after another. p.211
Converts RAW images to JPEG format.
p g
Z
Index
Item
Image Comparison
Protect
Function
Joins a number of images together and creates a new image from them.
Displays two images side-by-side.
Protects images from being accidentally erased.
r DPOF
*1
Sets the DPOF settings.
*1 This cannot be performed when a RAW image is displayed.
*2 This cannot be performed when a JPEG image is displayed.
Page
Playback Menu Setting Items
You can perform the following settings in the
[ Q Playback ] menu.
Press the 3 button in Playback mode to display the [ Q Playback 1] menu.
201
Menu Item
Slideshow
Q 1
Playback Display
Method
Delete All Images
Function
Plays back the images one after another.
You can set how images will be displayed in the slideshow.
Page
Sets whether to display the Bright/Dark
Area warning in Playback mode and also sets the initial magnification when enlarging images.
You can delete all saved images at once. p.218
7
202
Enlarging Images
Images can be magnified up to 16 times in Playback mode.
1
Use the four-way controller ( 45 ) to select an image in Playback mode.
2
Turn the e-dial to the right
(toward y ).
The image enlarges at each click (1.2 times to 16 times).
JPEG 1/ 2000 F5.6
100-0001
7
Available operations
Four-way controller ( 2345 ) e-dial to the right ( y ) e-dial to the left ( f )
4 button
M button
Moves the area to enlarge.
Enlarges image (up to 16 times).
Reduces image (up to 1.2 times*).
Returns to the original size.
Switches information display On/Off.
* The default setting for the first click (minimum magnification) is 1.2 times. You can
change this in [Playback Display Method] of the [
Q
• You can enlarge the image by following the same procedure during Instant
Review (p.63), Digital Preview (p.127) or Live View (p.147).
• The initial full display of vertical images is displayed with a magnification of
0.75 times that of horizontal images, therefore, magnification at the first click starts at 1.0 times.
Setting the Playback Display Method
You can set whether or not to display the Bright/Dark Area warning in
Playback mode and set the initial magnification when enlarging images.
1
Select [Playback Display Method] in the [ Q Playback 1] menu and press the four-way controller ( 5 ).
The [Playback Display Method] screen appears.
2
Use the four-way controller ( 45 ) to select O or P for [Bright/Dark
Area].
Playback Display Method
Bright/Dark Area
Quick Zoom Off
203
MENU
3
Use the four-way controller ( 23 ) to select [Quick Zoom].
4
Press the four-way controller ( 5 ) and use the four-way controller
( 23 ) to select the magnification.
Playback Display Method
Bright/Dark Area
Quick Zoom
Select from [Off] (default setting), [×2],
[×4], [×8] or [×16].
O f f
X2
X4
X8
X16
MENU Cancel OK OK
5
Press the 4 button.
6
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
7
204
Displaying Multiple Images
Multi-image Display Screen
You can display 4, 9, 16 or 36 images on the monitor at the same time.
The default setting is nine image-display.
1
Turn the e-dial to the left (toward f ) in Playback mode.
7
The multi-image display screen appears.
Up to nine thumbnail images will be displayed at once.
Frame
INFO 100-0001
Scroll bar
Available operations
Four-way controller
( 2345 )
M button
Moves the selection frame
Displays the [Multi-img Display Setting] screen. Use the four-way controller ( 45 ) to select the number of images to display at the same time.
205
Multi-img Display Setting
Display Type
MENU Cancel INFO OK OK
([Display Type] cannot be selected when developing
Selects multiple images and deletes them. (p.215)
K / i button
2
Press the 4 button.
A full screen display of the selected image appears.
7
JPEG 1/ 2000 F5.6
100-0001
Displaying Images by Folder
Images will be grouped and displayed by the folder in which they are saved.
1
In the multi-image display screen, turn the e-dial to the left
(toward f ) again.
The folder display screen appears.
206
2
Select the folder you want to display.
100 101
12345
102
103 104 105
Available operations 100_0105
Four-way controller ( 2345 )
K / i button
Moves the selection frame.
Deletes the selected folder and all
3
Press the 4 button.
The multi-image display screen for the selected folder appears.
7
Displaying Images by Shooting Date (Calendar
Display)
Images will be grouped and displayed by shooting date.
1
In the multi-image display screen, press the M button.
The [Multi-img Display Setting] screen appears.
2
Press the M button again.
The calendar display screen appears.
Only the dates when pictures were taken are displayed.
Number of images shot on this date
2009.
WED
9
23
FRI
MON
25
28
2009.
10
THU 1
4
WED
SAT
7
10
2/5
Delete
Shooting date
INFO
Thumbnail
Available operations
Four-way controller ( 23 )
Four-way controller ( 45 ) e-dial to the right ( y )
M button
Selects a shooting date.
Selects an image taken on the selected shooting date.
Displays the selected image. Turn to the left
( f ) to return to calendar display.
The camera returns to the multi-image display screen.
Deletes selected images.
K / i button
3
Press the 4 button.
A full screen display of the selected image appears.
207
Joining Multiple Images (Index)
Join a number of images together and display them as an index print. You can also save the displayed index print as a new image. You can select the images to include in the index print and have them randomly-arranged.
1
Press the four-way controller ( 3 ) in Playback mode.
The playback mode palette appears.
2
Use the four-way controller ( 2345 ) to select p (Index) and press the 4 button.
The [Index] screen appears.
3
Press the four-way controller ( 5 ).
4
Use the four-way controller ( 23 ) to select a layout and press the
4 button.
Index
Layout
Images
Backgrnd.
Selection
You can select o (Thumbnail), p (Square), q (Random1), r (Random2), s (Random3) or p (Bubble).
Create an image
MENU Cancel OK OK
7
208
7
5
Use the four-way controller ( 23 ) to select [Images] and press the four-way controller ( 5 ).
6
Use the four-way controller ( 23 ) to select the number of images and press the 4 button.
You can select 12, 24 or 36 images.
Index
Layout
Images
Backgrnd.
Selection
12
24
36
Create an image
MENU Cancel OK OK
7
Use the four-way controller ( 23 ) to select [Backgrnd.] and press the four-way controller ( 5 ).
8
Use the four-way controller ( 23 ) to select the background color and press the 4 button.
You can select a white or black background.
Index
Layout
Images
Backgrnd.
Selection
12
Create an image
MENU Cancel OK OK
9
Use the four-way controller ( 23 ) to select [Selection] and press the four-way controller ( 5 ).
10
Use the four-way controller ( 23 ) to select the type of image selection and press the 4 button.
Index
Layout
Images
Backgrnd.
Selection
12
Create an image
MENU Cancel OK OK
209 u (All images) w (Manual) x (Folder name)
Picks images automatically from all of the images saved.
Individually select the images you want to include in the index. Continue by selecting [Select image(s)] and selecting the individual images.
Picks images automatically from the folder selected. Continue by selecting [Select a folder] and selecting the folder.
11
Use the four-way controller ( 23 ) to select [Create an image] and press the 4 button.
The index image is created and a confirmation screen appears.
Index
Layout
Images
Backgrnd.
Selection
12
Create an image
MENU
12
Use the four-way controller ( 23 ) to select [Save] or [Reshuffle] and press the 4 button.
Save
Reshuffle
Cancel
MENU OK OK
Save
Reshuffle
The index image is saved as a P and C file.
Reselects the images included in the index and displays a new index image. However, if [Thumbnail] is selected for
[Layout], this is not displayed.
After the index image is saved, the camera returns to Playback mode and the index image is displayed.
• Processing may take a while when creating an index image.
• When the number of saved images is smaller than the number set for
[Images], empty spaces will appear in [Thumbnail] layout and some images may be duplicated in other layouts.
• The images are positioned in order starting from the smallest file number when [Thumbnail] or [Square] is selected.
7
210
Slideshow
You can play back all images saved on your SD Memory Card successively.
7
Setting the Slideshow Display
Sets how images will be displayed during the Slideshow.
1
Press the 3 button in Playback mode.
The [ Q Playback 1] menu appears.
2
Use the four-way controller ( 23 ) to select [Slideshow] and press the four-way controller ( 5 ).
The screen to make the slideshow settings appears.
3
Use the four-way controller ( 23 ) to select the item you want to change.
Slideshow starts
Start
The following items can be changed.
Interval
Screen Effect
Repeat Playback
3sec.
Item
Interval
Screen
Effect
Repeat
Playback
MENU OK OK
Description
Select the image display interval.
Select the transition effect when the next image is displayed.
Set whether to start the slideshow again from the beginning after the last image is displayed.
Setting
3sec. (default setting)/
5sec./10sec./30sec.
Off (default setting)/Fade/
Wipe/Stripe
P (default setting)/ O
4
Press the four-way controller ( 5 ) and use the four-way controller
( 23 ) to change the setting.
Start
Interval
Screen Effect
Repeat Playback
MENU Cancel
3sec.
5sec.
10sec.
30sec.
OK OK
211
Starting the Slideshow
1
Select [Start] in Step 3 on p.210
and press the 4 button.
Or, select u (Slideshow) in the playback mode palette and press the 4 button.
The start screen is displayed and the slideshow begins.
Available operations
4 button
Four-way controller ( 4 )
Four-way controller ( 5 )
Four-way controller ( 3 )
Start
OK
Pauses playback. Press again to resume playback.
Shows the previous image.
Shows the next image.
Stops playback.
7
212
2
Stop the slideshow.
Slideshow ends when one of the following operations is performed during playback or when paused.
- The four-way controller ( 3
- The Q button is pressed
- The 3 button is pressed
- The shutter release button is pressed halfway or fully
- The = / L button is pressed
*1 After slideshow ends, the camera switches to normal Playback mode.
*2 After slideshow ends, the camera switches to Capture mode.
For movies, only the first frame is displayed and then the next image is displayed after the set interval has elapsed. To play a movie during a slideshow, press the 4 button while the first frame is displayed. After the movie has finished playing, the slideshow will resume.
7
Rotating Images
213
You can rotate the image displayed 90° counterclockwise at a time and save the rotated image. The image rotation information is saved with the image and during playback it will be displayed in portrait orientation.
• When [18. Saving Rotation Info] in the [
A
Custom Setting 3] menu (p.82) is
set to [Off], the image rotation information is not saved when shooting.
• When [19. Auto Image Rotation] in the [
A
Custom Setting 3] menu (p.82) is
set to [On], the image is automatically rotated during playback according to the image rotation information.
You cannot change the image rotation information in the following conditions.
- When the image is protected
- When the image rotation information is not saved with the image
- When [19. Auto Image Rotation] in the [
A
Custom Setting 3] menu (p.82) is
set to [Off]
1
Select the image you want to rotate in Playback mode.
2
Press the four-way controller ( 3 ).
The playback mode palette appears.
3
Use the four-way controller ( 2345 ) to select s (Image
Rotation) and press the 4 button.
The selected image is rotated in 90° increments and the four thumbnail images are displayed.
4
Use the four-way controller
( 2345 ) to select the rotation direction and press the 4 button.
The image rotation information is saved.
MENU Cancel OK OK
7
214
Comparing Images
7
You can display two images side-by-side.
1
Press the four-way controller ( 3 ) in Playback mode.
The playback mode palette appears.
2
Use the four-way controller ( 2345 ) to select g (Image
Comparison) and press the 4 button.
The last image displayed will be displayed twice side-by-side.
3
Select two images you want to compare using the e-dial and compare them at left and right.
You can perform the following operations while comparing the images.
OK MENU
Available operations
4 button
Four-way controller
( 2345 )
| (Green) button e-dial
M button
K / i button
Moves the selection frame to the right image, both images, and left image each time the button is pressed.
Moves the area to enlarge. When the selection frame is placed on both images, you can manipulate both images at the same time.
Returns the enlarge display position to the center.
When the selection frame is placed on the left or right image, the previous or next image is displayed.
When the selection frames are placed on both images, you can enlarge or reduce both images simultaneously in the same magnification.
Switches information display On/Off.
When the selection frame is placed on the left or right image, the selected image is deleted.
4
Press the 3 button.
The camera returns to the normal playback mode.
Deleting Multiple Images
Deleting Selected Images
You can delete multiple images in the multi-image display at once.
Deleted images cannot be restored.
• Protected images cannot be deleted.
• You can select up to 100 images at a time.
1
Turn the e-dial to the left (toward f ) in Playback mode.
The multi-image display screen appears.
215
7
2
Press the K / i button.
The screen to select the images to delete is displayed.
INFO 100-0001
3
Select the images to delete.
MENU Delete OK
216
Available operations
Four-way controller
( 2345 )
4 button
Moves the selection frame e-dial
Adds O and selects an image. Press again to return to P . Protected images ( Z ) cannot be selected.
Displays a full screen display of the image selected with the selection frame. When the image is displayed full screen, press the four-way controller
( 45 ) to display the previous or next image.
4
Press the K / i button.
The delete confirmation screen appears.
5
Press the four-way controller ( 2 ) to select [Select & Delete].
All selected images will be deleted
Select & Delete
Cancel
MENU OK OK
7
6
Press the 4 button.
The selected images are deleted.
Deleting a Folder
You can delete the selected folder and all the images in it.
1
Turn the e-dial two clicks to the left (toward f ) in Playback mode.
The folder display screen appears.
2
Use the four-way controller
( 2345 ) to select a folder to delete and press the K / i button.
The delete folder confirmation screen appears.
100
103
101
104
12345
102
105
100_0105
3
Press the four-way controller ( 2 ) to select [Delete].
100_0105
All images in selected folder will be deleted
Delete
Cancel
OK OK
4
Press the 4 button.
The folder and all images in it are deleted.
The confirmation screen appears when there are protected images. Use the fourway controller ( 23 ) to select [Delete All] or [Leave All] and press the 4 button.
When [Delete All] is selected, protected images are also deleted.
3image(s)
Protected images are found
Delete All
Leave All
OK OK
217
7
218
Deleting All Images
You can delete all saved images at once.
Deleted images cannot be restored.
7
1
Select [Delete All Images] in the [ Q Playback 1] menu and press the four-way controller ( 5 ).
The confirmation screen for deleting all images is displayed.
2
Press the four-way controller ( 2 ) to select [Delete All Images].
All images will be deleted from memory
Delete All Images
Cancel
OK OK
3
Press the 4 button.
All images are deleted.
The confirmation screen appears when there are protected images. Use the fourway controller ( 23 ) to select [Delete All] or [Leave All] and press the 4 button.
When [Delete All] is selected, protected images are also deleted.
3image(s)
Protected images are found
Delete All
Leave All
OK OK
Protecting Images from Deletion
(Protect)
You can protect images from being accidentally deleted.
Even protected images are deleted if the inserted SD Memory Card is formatted.
219
Protecting a Single Image
1
Press the four-way controller ( 3 ) in Playback mode.
The playback mode palette appears.
2
Use the four-way controller ( 2345 ) to select
Z (Protect) and press the 4 button.
The screen to select the Protect setting method is displayed.
3
Use the four-way controller
( 23 ) to select [Single Image] and press the 4 button.
Single Image
All Images
MENU OK OK
4
Use the four-way controller ( 45 ) to select an image to protect.
5
Press the four-way controller ( 2 ) to select [Protect].
Select [Unprotect] to cancel the protection of the image.
Protect
Unprotect
MENU OK OK
7
220
6
Press the 4 button.
The image is protected and the Y icon appears at the top right of the screen.
Repeat Steps 4 to 6 to protect other images.
Protecting All Images
1
Select [All Images] in Step 3 on p.219 and press the
4 button.
2
Press the four-way controller ( 2 ) to select [Protect] and press the
4 button.
All images saved on the SD Memory Card are protected.
Select [Unprotect] to cancel the protection of all images.
MENU
Protects all images
Protect
Unprotect
OK OK
7
Connecting the Camera to an AV
Device
You can connect the camera to a TV or other device with a video IN jack and play back images. Use the optional AV cable (I-AVC7).
1
Turn the AV device and camera off.
2
Open the terminal cover, face the arrow on the AV cable toward the 2 mark on the camera, and connect the cable to the PC/AV terminal.
221
3
Connect the other end of the AV cable to the video IN jack on the AV device.
4
Turn the AV device and camera on.
The camera turns on in video mode, and the camera information is displayed on the screen of the connected AV device.
• If you intend to use the camera continuously for a long period, use of the AC
adapter kit K-AC84 (optional) is recommended. (p.42)
• For an AV device with multiple video IN jacks, check the operating manual of the AV device, and select a suitable video IN jack for connecting the camera.
• The camera monitor turns off while the camera is connected to the AV device. You cannot adjust the volume on the camera. Adjust the volume on the AV device.
7
222
7
Selecting the Video Output Format
When the hometown is set at the time of initial setting (p.52), the video
output format is set in accordance with that region. Depending on the country or region, images may fail to be played back with the set video output format. If this happens, change the video output format setting.
1
Select [Video Out] in the [ R Set-up 2] menu and press the four-way controller ( 5 ).
2
Use the four-way controller ( 23 ) to select [NTSC] or [PAL].
1 2 3 4
Brightness Level
LCD Color Tuning
Video Out
USB Connection
Folder Name
Copyright Information
±0
NTSC
Date
MENU Cancel OK OK
3
Press the 4 button.
4
Press the 3 button.
The video output format is set.
The video output format differs depending on the region. When you set [Setting
the Time] in the World Time setting (p.244) to
X (Destination), the video output setting changes to the video output format for that city.
8
Processing Images
This chapter describes how to process pictures taken and edit RAW images.
Changing the Image Size ................................... 224
Processing Images with Digital Filters ............ 227
Developing RAW Images ................................... 233
Readjusting Images Shot in JPEG Format ...... 238
224
Changing the Image Size
Changes the number of recorded pixels and quality level of the image, and saves the image as a new file.
8
Changing the Number of Recorded Pixels and
Quality Level (Resize)
Changes the number of recorded pixels and quality level of the selected image and saves it as a new image. The number of recorded pixels can be reduced while still obtaining an image with good quality.
• Only JPEG files captured with this camera can be resized.
• You cannot select a larger resolution than that of the original image.
• Images resized to Z with this camera cannot be resized.
1
Select an image to resize in Playback mode.
2
Press the four-way controller ( 3 ).
The playback mode palette appears.
3
Use the four-way controller ( 2345 ) to select n (Resize) and press the 4 button.
The screen to select the recorded pixels and quality level appears.
4
Use the four-way controller ( 45 ) to select a size.
You can select one of the image sizes starting from one size smaller than that of the original image. The selectable sizes differ according to the original image size and aspect ratio.
12
M
10
M
MENU OK
5
Press the four-way controller ( 3 ) and use the four-way controller ( 45 ) to select the quality level.
You can select C , D or E .
225
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller
( 23 ) to select [Save as].
Save as
Cancel
OK
8
Press the 4 button.
The resized image is saved as a new image.
MENU
Cutting Out Part of the Image (Cropping)
Cuts out only the desired area of the selected image and saves it as a new image. The aspect ratio can also be changed.
• Only JPEG and RAW files captured with this camera can be cropped.
• Images resized to j or Z with this camera cannot be cropped.
1
Select an image to crop in Playback mode.
2
Press the four-way controller ( 3 ).
The playback mode palette appears.
3
Use the four-way controller ( 2345 ) to select o (Cropping) and press the 4 button.
The cropping frame to specify the size and position of the area to crop appears on the screen.
8
226
4
Specify the size and position of the area to crop by using cropping frame.
Available operations e-dial
Four-way controller
( 2345 )
M button
MENU INFO
3:2
Changes the size of the cropping frame.
Moves the cropping frame.
Changes the aspect ratio. Select from [3:2],
[4:3], [16:9] or [1:1]. The image can also be rotated from -45° to +45° in increments of 1°.
OK
Aspect Ratio
Image Rotation
3:2
±0°
8
MENU
| (Green) button Rotates the cropping frame in 90° increments.
| appears only when the cropping frame can be rotated.
5
Press the 4 button.
The save confirmation screen appears.
6
Use the four-way controller ( 23 ) to select [Save as].
7
Press the 4 button.
The cropped image is saved as a new image.
MENU
Save as
Cancel
OK
Processing Images with Digital
Filters
You can edit captured images using digital filters.
The following filters are available.
Filter name
Toy Camera
Retro
High Contrast
Extract Color
Water Color
Pastel
Miniature
Base
Parameter
Adj
Monochrome
Color
Effect
Creates an image that looks as though it was shot with a toy camera.
Creates an image with the look of an old photo.
Parameter
Shading Level: +1/+2/+3
Blur: +1/+2/+3
Tone Break: Red/Green/Blue/Yellow
Toning: -3 to +3
Frame Composite: None/Thin/Medium/
Thick
Enhances the contrast in the image.
Extracts a specific color and makes the rest of the image black and white.
Creates an image that looks as though it was painted.
Creates an image that looks as though it was drawn with a crayon.
Blurs part of the image to create a fake miniature scene.
+1 to +5
Color: Red/Magenta/Blue/Cyan/Green/
Yellow
Color Freq. Range: -2 to +2
Intensity: Weak/Standard/Strong
Saturation: Low/Medium/High
Weak/Standard/Strong
Front/Middle/Back
Adjusts the parameters to create the desired image.
Brightness: ±8 levels
Saturation: ±3 levels
Hue: ±3 levels
Contrast: ±3 levels
Sharpness: ±3 levels
Filter Effect: OFF/Red/Green/Blue/IR Creates a monochrome image such as a blackand-white photo.
Adds a color filter to the image. Select from 18 filters (6 colors × 3 tones).
Toning (B-A): 7 levels
Color: Red/Magenta/Cyan/Blue/Green/
Yellow
Color Density: Light/Standard/Dark
227
8
228
8
Filter name
Soft
Star Burst
Fish-eye
Slim
HDR
Custom Filter
Effect
Creates an image with a soft focus throughout the image.
For taking pictures of night scenes or lights reflected on water with a special sparkling look achieved by adding cross-like effects to the picture’s highlights.
Creates an image that looks as though it was shot with a fish-eye lens.
Changes the horizontal and vertical ratio of images.
Creates an image that looks like a high dynamic range image.
Parameter
Soft Focus: +1/+2/+3
Shadow Blur: OFF/ON
Effect Density: Small/Medium/Large
Size: Short/Medium/Long
Angle: 0°/30°/45°/60°
Weak/Medium/Strong
±8 levels
Weak/Standard/Strong
Customize and save a filter to your own preferences.
High Contrast: OFF/+1 to +5
Soft Focus: OFF/+1/+2/+3
Tone Break: OFF/Red/Green/Blue/
Yellow
Shading Type: 6 types
Shading Level: -3 to +3
Distortion Type: 3 types
Distortion Level: OFF/Weak/Medium/
Strong
Invert Color: OFF/ON
Only JPEG and RAW files captured with this camera can be edited using the
Digital Filter.
229
Applying the Digital Filter
1
Select an image for applying the digital filter in Playback mode.
2
Press the four-way controller ( 3 ).
The playback mode palette appears.
3
Use the four-way controller ( 2345 ) to select D (Digital
Filter) and press the 4 button.
The screen to select the filter appears.
4
Use the four-way controller
( 2345 ) to select a filter and press the 4 button.
After selecting a filter, you can check the effects on the screen.
You can select a different image by turning the e-dial.
MENU Exit OK OK
5
Use the four-way controller ( 23 ) to select the parameter and the four-way controller ( 45 ) to adjust the value.
8
OK MENU
Color Filter
6
Press the 4 button.
The save confirmation screen appears.
MENU
Slim Filter
OK
230
7
Use the four-way controller ( 23 ) to select [Use filters in combination] or [Save as].
Select [Use filters in combination] when you want to apply additional filters to the same image.
Use filters in combination
Save as
Cancel
MENU OK OK
8
Press the 4 button.
If [Use filters in combination] was selected, the camera returns to Step 4.
If [Save as] was selected, the filter-processed image is saved as a new image.
Up to 20 filters, including a digital filter used during shooting (p.140), can be
combined to the same image.
8
Recreating Filter Effects
Retrieves the setting of an image with filter effects and apply the same filter effects to other images.
1
Select a filter-processed image in Playback mode.
2
Select [Digital Filter] in the playback mode palette.
3
Use the four-way controller
( 23 ) to select [Recreating filter effects] and press the 4 button.
Applying the digital filter
Recreating filter effects
The history of the filter set for the selected image appears.
Searching for the original image
MENU OK OK
4
To check the parameter details, press the M button.
You can check the filter parameters.
1.
2.
3.
4.
MENU
5.
6.
7.
8.
9.
10.
11.
12.
INFO Details
13.
14.
15.
16.
17. - -
18. - -
19. - -
20. - -
OK OK
5
Press the 4 button.
The image selection screen appears.
6
Use the four-way controller
( 45 ) to select an image for applying the same filter effects and press the 4 button.
You can only select an image that has not been processed with a filter.
The save confirmation screen appears.
7
Use the four-way controller ( 23 ) to select [Save as] and press the
4 button.
The filter-processed image is saved as a new image.
MENU
Save as
Cancel
OK OK
MENU OK OK
231
8
232
Searching for the Original Image
Searches for and displays the original image prior to digital filter application.
1
Select [Searching for the original
press the 4 button.
The original image prior to digital filter application is retrieved.
Applying the digital filter
Recreating filter effects
Searching for the original image
MENU OK OK
If the original image is no longer stored on the SD Memory Card, the message
[Original image, prior to digital filter application, is not found] appears.
8
Developing RAW Images
233
You can convert captured RAW files into JPEG files.
Only RAW files captured with this camera can be edited. RAW files and JPEG files captured with other cameras cannot be edited on this camera.
Developing One RAW Image
1
Select a RAW image in Playback mode.
2
Press the four-way controller ( 3 ).
The playback mode palette appears.
3
Use the four-way controller ( 2345 ) to select h (RAW
Development) and press the 4 button.
The screen to select the development method is displayed.
4
Use the four-way controller ( 23 ) to select [Developing Single
Image] and press the 4 button.
JPEG
Developing Single Image
Developing Multiple Images
8
MENU
The parameters recorded in the image file appear.
You can select a different image by turning the e-dial.
To specify the parameters before
developing, refer to “Specifying the
MENU
OK OK
12
M
OK 100-0001
234
5
Press the 4 button.
The save confirmation screen appears.
6
Use the four-way controller ( 23 ) to select [Save as] and press the
4 button.
The RAW image is developed and saved as a new image.
RAW JPEG
Saves the image as a new file
Save as
Cancel
MENU OK OK
7
Use the four-way controller ( 23 ) to select [Exit] and press the 4 button.
Select [Continue] to edit other images.
Image developed and stored.
Continue developing?
Continue
Exit
OK OK
8
Developing Multiple RAW Images
You can develop multiple RAW images using the same settings.
1
Select [Developing Multiple Images] in Step 4 on p.233 and
press the 4 button.
The multi-image display screen appears.
Refer to p.204 for details on operations in the multi-image display screen.
2
Use the four-way controller ( 2345 ) to select the RAW images to be developed and press the 4 button.
3
Press the M button.
The development confirmation screen appears.
4
Use the four-way controller ( 23 ) to select [Develop images as shot] or [Develop images with modified settings].
Develop images as shot
To change the parameters, select
[Develop images with modified settings].
For details, refer to “Specifying the
The screen to select the parameter appears.
MENU
Develop images with modified settings
OK OK
5
Set [Recorded Pixels] and
[Quality Level].
Recorded Pixels
Quality Level
12 12
M
235
MENU Cancel OK OK
6
Press the 4 button.
The save confirmation screen appears.
7
Use the four-way controller
( 23 ) to select [Save as] and press the 4 button.
The selected RAW images are developed and saved as new images.
RAW JPEG
Saves the image as a new file
Save as
Cancel
MENU OK OK
8
236
8
Specifying the Parameters
Specify the parameters for developing RAW images.
The following parameters can be changed.
Parameter
Recorded Pixels
Quality Level
Custom Image
White Balance
Sensitivity
High-ISO NR
Shadow Correction
Distortion Correction
Lat-Chromatic-Ab Adj
Color Space
Value
E (4288×2848)/ J (3936×2624)/
P (3072×2048)/ i (1728×1152)
C (Best) / D (Better) / E (Good)
Bright/Natural/Portrait/Landscape/Vibrant/
Muted/Monochrome
F (Auto)/ G (Daylight)/ H (Shade)/
^ (Cloudy)/ J D (Fluorescent Light Daylight
Color)/ J N (Fluorescent Light Daylight
White)/ J W (Fluorescent Light Cool White)/
J L (Fluorescent Light Warm White)/
I (Tungsten Light)/ L (Flash)/ f /
K (Manual)
-2.0 to +2.0
OFF/Low/Medium/High
OFF/Low/Medium/High
OFF/ON
OFF/ON sRGB/AdobeRGB
*1 This cannot be set for RAW files taken in Multi-exposure mode.
*2 This can be selected only when a compatible lens is attached. (p.192)
Page
–
1
Press the four-way controller
( 23
choose the parameter you want to change.
12
M
MENU OK 100-0001
2
Use the four-way controller ( 45 ) to change the value.
Use the four-way controller ( 5 ) to display the setting screen for White
Balance and Custom Image.
3
Press the 4 button.
The save confirmation screen appears.
4
Use the four-way controller ( 23 ) to select [Save as] and press the 4 button.
The RAW image is developed and saved as a new image.
• You cannot save the background image or use Digital Preview with White
Balance and Custom Image.
• When the white balance is set to K (Manual), press the m c button to display the measuring screen.
237
8
238
Readjusting Images Shot in JPEG
Format
8
You can readjust Custom Image and White Balance for the image shot in
JPEG format immediately after shooting it without deteriorating image quality.
1
Set the file format to [JPEG] and shoot an image.
Refer to p.177 for setting File Format.
2
Press the four-way controller ( 4 ) to change White
Balance, or press the four-way controller ( 5 ) to change
Custom Image.
The [White Balance] or [Custom Image] screen appears.
3
Set White Balance or Custom Image as desired.
Custom Image or White Balance can be set using the same procedures as before shooting.
Refer to p.182 for setting White Balance and p.194 for setting Custom
Image.
4
Press the M button.
The save confirmation screen appears.
5
Use the four-way controller ( 23 ) to select [Save as] and press the 4 button.
The image with the White Balance or Custom Image setting is saved as a new image.
The image can be readjusted only right after being shot. Adjustments cannot be made after new images are shot or the camera is turned off.
9
Changing Additional
Settings
This chapter describes how to change additional settings.
How to Operate the Set-up Menu ...................... 240
Formatting an SD Memory Card ....................... 242
Setting the Beep, Date and Time, and Display
Language ............................................................ 243
Adjusting the Monitor and the Menu Display .. 248
Setting the Folder Name/File Number Naming
Convention ......................................................... 252
Selecting the Power Settings ............................ 253
Setting the DPOF Settings ................................ 255
Setting the Photographer Information Saved to
Exif ....................................................................... 257
Correcting Defective Pixels in the CMOS Sensor
(Pixel Mapping) ................................................... 259
Selecting Settings to Save in the Camera (Memory)
.............................................................................. 260
240
How to Operate the Set-up Menu
Perform various settings related to the camera in the [ R Set-up] menu.
For details on how to operate the menus, refer to “Using the Menus” (p.35).
9
Set-up Menu Setting Items
Perform the following settings in the [ R Set-up 1-4] menus.
Press the 3 button in Capture/Playback mode and use the four-way controller ( 45 ) to display the [ R Set-up 1-4] menus.
Menu
R
R
1
2
Item
Language/
Text Size u
Date Adjustment
World Time
Function
Changes the language in which menus and messages appear.
Sets the date format and time.
Sets the display of local date and time of a specified city in addition to the present location on the monitor when traveling overseas.
Sets the size of the text selected in the menus.
Guide Display
Beep
Brightness Level
Sets whether to display indicators in the monitor.
Switches the beep tone on/off.
Changes the brightness of the monitor.
LCD Color Tuning Adjusts the color of the monitor.
Video Out
Sets the output format when connecting to an AV device with a video jack.
USB Connection
Folder Name
Copyright
Information
Sets the USB connection mode when connecting to a computer.
Sets the method used to assign folder names for storing images.
Sets the photographer and copyright information embedded in Exif.
Page
Menu Item
Auto Power Off
R 3
Select Battery
Reset
Pixel Mapping
R 4
Dust Alert
Dust Removal
Sensor Cleaning
Format
Function
Sets the time until the camera turns off automatically.
Selects the type of batteries inserted in the camera.
Resets all settings.
Maps out and corrects any defective pixels in the CMOS sensor.
Detects dust adhering to the CMOS sensor.
Cleans the CMOS sensor by shaking it.
Locks the mirror in the up position for cleaning the CMOS sensor.
Formats the SD Memory Card.
Page
241
[ R Set-up 1] menu
1 2 3 4
English
Date Adjustment
World Time
Text Size
Guide Display
Beep
Standard
3sec.
MENU Exit
[ R Set-up 3] menu
1 2 3 4
Auto Power Off
Select Battery
Reset
1min.
AUTO
MENU Exit
[ R Set-up 2] menu
1 2 3 4
Brightness Level
LCD Color Tuning
Video Out
USB Connection
Folder Name
Copyright Information
±0
NTSC
MSC
Date
MENU Exit
[ R Set-up 4] menu
1 2 3 4
Pixel Mapping
Dust Alert
Dust Removal
Sensor Cleaning
Format
MENU Exit
9
242
Formatting an SD Memory Card
Use this camera to format (initialize) an SD Memory Card that is unused or has been used on other cameras or digital devices.
Formatting deletes all the data saved on the SD Memory Card.
• Do not remove the SD Memory Card while formatting. The card may be damaged and become unusable.
• Formatting deletes all data, either protected or unprotected. Be aware.
1
R Set-up 4] menu and press the four-way controller ( 5 ).
The [Format] screen appears.
2
Press the four-way controller ( 2 ) to select [Format].
Format
All data will be deleted
Format
Cancel
OK OK
9
3
Press the 4 button.
Formatting starts.
When formatting is completed, the screen that was displayed before selecting the menu appears again.
Setting the Beep, Date and Time, and
Display Language
243
Setting the Beep
You can turn the camera operation beep on or off.
There are five items that you can set: In-focus, AE-L (AE lock operation sound), RAW (operation sound when [RAW Button Function] is assigned to the | button), Self-timer and Remote Control.
The default setting is all O (On).
1
Select [Beep] in the [ R Set-up 1] menu and press the fourway controller ( 5 ).
The [Beep] screen appears.
2
Use the four-way controller
( 23 ) to select an item and use the four-way controller ( 45 ) to select O or P .
You can turn all the beeps off by selecting
Z for [Setting].
Beep
Setting
In-focus
AE-L
RAW
Self-timer
Remote Control
MENU
3
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
9
244
Changing the Date and Time Display
You can change the initial date and time settings. You can also set the display style. Choose [mm/dd/yy], [dd/mm/yy] or [yy/mm/dd] for the date display format, and [12h] (12 hour) or [24h] (24 hour) for the time display format.
Set in [Date Adjustment] of the [ R Set-up 1]
1
Setting the Date and Time (p.56)
Date Adjustment
Date Format mm/dd/yy 24h
Date 01 /
Time
Settings complete
MENU Cancel
9
Setting the World Time
The date and time selected in “Initial Settings” (p.52) serve as the date and
time of your present location.
Setting the destination in [World Time] enables you to display the local date and time on the monitor when traveling overseas.
1
R Set-up 1] menu and press the four-way controller ( 5 ).
The [World Time] screen appears.
2
Use the four-way controller ( 45 ) to select X (Destination) or W
(Hometown) for [Setting the
Time].
World Time
Setting the Time
Destination
London
This setting changes the date and time on the guide display and control panel.
Hometown
New York
MENU
3
Press the four-way controller ( 3 ).
The selection frame moves to X (Destination setting).
4
Press the four-way controller ( 5 ).
The [ X Destination] screen appears.
5
Use the four-way controller ( 45 ) to select a destination city.
Destination
Turn the e-dial to change the region.
The location, time difference and current time of the selected city appears.
London +06:00
DST
MENU Cancel
6
Press the four-way controller ( 3 ) to select [DST].
7
Use the four-way controller ( 45 ) to select O or P .
Select O if the destination city uses daylight saving time (DST).
16:00
OK OK
8
Press the 4 button.
The destination setting is saved.
9
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
245
• Refer to “List of World Time Cities” (p.246) for cities that can be specified as
a destination.
• Select W (Hometown) in Step 2 to set the city and DST setting.
• X appears in the guide display and control panel if [Setting the Time] is set to X
• When you switch [Setting the Time] to X (Destination), the video output
(p.222) setting changes to the default setting for that city.
9
246
9
List of World Time Cities
Region
North
America
Central and
South
America
Europe
City
Honolulu
Anchorage
Vancouver
San Francisco
Los Angeles
Calgary
Denver
Chicago
Miami
Toronto
New York
Halifax
Mexico City
Lima
Santiago
Caracas
Buenos Aires
Sao Paulo
Rio de Janeiro
Lisbon
Madrid
London
Paris
Amsterdam
Milan
Rome
Copenhagen
Berlin
Prague
Stockholm
Budapest
Warsaw
Athens
Helsinki
Moscow
Region
Africa/
West Asia
East Asia
City
Dakar
Algiers
Johannesburg
Istanbul
Cairo
Jerusalem
Nairobi
Jeddah
Tehran
Dubai
Karachi
Kabul
Male
Delhi
Colombo
Kathmandu
Dacca
Yangon
Bangkok
Kuala Lumpur
Vientiane
Singapore
Phnom Penh
Ho chi Minh
Jakarta
Hong Kong
Beijing
Shanghai
Manila
Taipei
Seoul
Tokyo
Guam
Region
Oceania
City
Perth
Adelaide
Sydney
Noumea
Wellington
Auckland
Pago Pago
Setting the Display Language
You can change the language in which the menus, error messages, etc. are displayed.
You can choose from 20 languages: English, French, German, Spanish,
Portuguese, Italian, Dutch, Danish, Swedish, Finnish, Polish, Czech,
Hungarian, Turkish, Greek, Russian, Korean, Chinese (Traditional/
Simplified) and Japanese.
] of the [ R Set-up 1]
1
Setting the Display Language (p.52)
247
MENU Cancel OK OK
9
248
Adjusting the Monitor and the Menu
Display
Setting the Text Size
You can set the size of the text selected in the menus to [Standard]
(normal display) or [Large] (magnified display).
R Set-up 1] menu
1 2 3 4
English
Date Adjustment
World Time
Text Size
Guide Display
Beep
Standard
MENU Cancel OK OK
9
Setting the Guide Display Time
Set the length of time that the guides are displayed on the monitor when
the camera is turned on or the Capture mode is changed. (p.22)
Select from [3 sec.] (default setting), [10 sec.], [30 sec.] and [Off].
Set in [Guide Display] of the [
R Set-up 1]
1 2 3 4
English
Date Adjustment
World Time
Text Size
Guide Display
Beep
3sec.
MENU Cancel
30sec.
Off
OK OK
Setting the Status Screen Display
You can set the display color of the status screen and control panel.
1
Select [Status Screen] in the [ A Rec. Mode 3] menu and press the four-way controller ( 5 ).
The [Status Screen] screen appears.
2
Use the four-way controller ( 45 ) to select from the six display colors.
Status Screen
Display Color 1
1/ 125
MENU
3
Press the 3 button twice.
The status screen display color settings are changed.
F 5.6
249
Setting the Display for Instant Review
You can set the Instant Review display time and whether or not to display the histogram and Bright/Dark Area warning. The default settings are
[1 sec.] for the Instant Review display time and P (Off) for the histogram and Bright/Dark Area warning.
1
Select [Instant Review] in the [ A Rec. Mode 3] menu and press the four-way controller ( 5 ).
The [Instant Review] screen appears.
2
Press the four-way controller ( 5 ) and use the four-way controller
( 23 ) to select a display time.
Instant Review
Display Time
Histogram
Bright/Dark Area
1sec.
3sec.
5sec.
Off
9
MENU Cancel OK OK
250
3
Press the 4 button.
4
Use the four-way controller ( 23 ) to select [Histogram] or
[Bright/Dark Area].
5
Use the four-way controller ( 45 ) to select O or P .
6
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
Adjusting the Brightness of the Monitor
You can adjust the brightness of the monitor. Adjust the settings when the monitor is hard to see.
1
Select [Brightness Level] in the [
R Set-up 2] menu and press the four-way controller ( 5 ).
The [Brightness Level] screen appears.
2
Use the four-way controller ( 45 ) to adjust the brightness.
You can select from 15 brightness levels.
Brightness Level
9
MENU Cancel OK
3
Press the 4 button.
4
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
Adjusting the Color of the Monitor
You can adjust the color of the monitor.
1
Select [LCD Color Tuning] in the [ R Set-up 2] menu and press the four-way controller ( 5 ).
The [LCD Color Tuning] screen appears.
2
Adjust the color.
Seven levels (225 patterns) are available on the G-M and B-A axes.
251
±0 ±0
MENU Cancel ±0 OK OK
Available operations
Four-way controller ( 23 ) Adjusts the tone of the colors between green (G) and magenta (M).
Four-way controller ( 45 ) Adjusts the tone of the colors between blue (B) and amber (A).
| (Green) button Resets the adjustment value.
e-dial Displays a saved image in the background so you can adjust the color while viewing the image. This is useful for matching the color of the monitor with that of a computer.
3
Press the 4 button.
4
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
9
252
Setting the Folder Name/File Number
Naming Convention
Selecting the Folder Name
You can select a method for assigning the folder names for storing images.
Date
PENTX
The two digits of the month and day on which the picture was taken are assigned as the folder name in the form of [xxx_MMDD]. [xxx] is a sequential number from 100 to 999. [MMDD] (month and day) appears according to the display style set in [Date Adjustment]
Example) 101_0125: Folder for pictures taken on January 25th
The folder name is assigned in the form of [xxxPENTX].
Example) 101PENTX
R Set-up 2]
1 2 3 4
Brightness Level
LCD Color Tuning
Video Out
USB Connection
Folder Name
Copyright Information
±0
NTSC
MSC
Date
MENU Cancel OK OK
9
Selecting the File Number Setting
You can select a method for assigning the file number of an image when saved to a new folder. Select O or P
for [File No.] in [Memory] (p.260) of
the [ A Rec. Mode 4] menu.
O
P
The file number of the last image saved to the previous folder is saved and subsequent images are assigned sequential file numbers even if a new folder is created.
The file number of the first image saved to a folder returns to 0001 each time a new folder is created for saving images.
When the number of storable images exceeds 500, captured images are divided into folders of 500 images each. However, in Exposure Bracketing shooting, images will be stored in the same folder until shooting is completed, even if the number of images exceeds 500.
Selecting the Power Settings
253
Setting Auto Power Off
You can set the camera to turn off automatically if unused after a certain length of time. Select from [1 min.] (default setting), [3 min.], [5 min.],
[10 min.], [30 min.] or [Off].
Set in [Auto Power Off] of the [
R Set-up 3]
1 2 3 4
Auto Power Off
Select Battery
Reset
1min.
3min.
5min.
10min.
30min.
Off
MENU Cancel OK OK
The Auto Power Off function does not work in the following situations.
- When the Live View is displayed
- When the slideshow is played back
- When the camera is connected to a computer with the USB cable
Setting the Battery Type
Sets the type of batteries used in the camera. The default setting is [Autodetect].
1
Select [Select Battery] in the [ R Set-up 3] menu and press the four-way controller ( 5 ).
The [Select Battery] screen appears.
9
254
2
Use the four-way controller ( 23 ) to select the type of batteries.
When set to [Auto-detect], the camera will automatically detect the type of batteries being used.
1 2 3 4
Auto Power Off
Select Battery
1min.
AUTO
Li
Ni-MH
AL
Auto-detect
Lithium
Nickel-Metal Hydride
Alkaline
MENU Cancel OK OK
3
Press the 4 button.
4
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
When a type of batteries different from that selected in the menu setting is used, the battery level will not be correctly determined. Please set the correct battery type. Usually, there is no problem using [Auto-detect]. However in low temperatures and when using batteries that were stored for long periods of time, set the appropriate battery type so the camera can correctly determine the remaining battery level.
9
Setting the Operation of the Power Lamp
Sets the operation of the power lamp from [Standard] (default setting),
[Low] or [Off].
Set in [20. Power lamp] of the [
A Custom
20.
Power lamp
1
2
3
Standard
Low
Off
The power lamp is lit when the camera is switched on
MENU Cancel OK OK
Even if the power lamp is set to [Off], the lamp lights up while the camera is transferring data to a computer when connected using the USB cable.
Setting the DPOF Settings
255
You can order conventional photograph prints by taking the SD Memory
Card with recorded images to a store for printing.
DPOF (Digital Print Order Format) settings allow you to specify the number of copies and whether to imprint the date.
• DPOF settings cannot be applied to RAW images.
• You can make DPOF settings for up to 999 images.
1
Press the four-way controller ( 3 ) in Playback mode.
The playback mode palette appears.
2
Use the four-way controller ( 2345 ) to select r (DPOF) and press the 4 button.
The screen to select how to change the settings is displayed.
3
Use the four-way controller ( 23 ) to select [Single Image] or [All
Images] and press the 4 button.
Single Image
All Images
MENU OK OK
4
When [Single Image] is selected in Step 3, use the four-way controller ( 45 ) to select an image to set DPOF settings.
Copies 00 Date
9
OK MENU
5
Use the four-way controller ( 23 ) to select the number of copies.
You can set up to 99 copies.
256
6
Turn the e-dial to select O or P for printing the date.
O : The date will be printed.
P : The date will not be printed.
Repeat Steps 4 to 6 to set other images
(up to 999).
Copies 01 Date
OK MENU
7
Press the 4 button.
The DPOF settings for the selected image is saved and the camera returns to Playback mode.
• Depending on the printer or printing equipment at the photo processing lab, the date may not be printed on the pictures even if the date for DPOF setting is set to O .
• The number of copies specified in settings for all images applies to all the images and the settings for single images are canceled. Before printing, check that the number is correct.
To cancel DPOF settings, set the number of copies to [00] in Step 5 and press the 4 button.
9
Setting the Photographer Information
Saved to Exif
The camera type, shooting conditions and other information are automatically embedded in captured images in the Exif data format. You can embed photographer information in this Exif.
Use the provided “PENTAX Digital Camera Utility 4” software to check the Exif information.
1
Select [Copyright Information] in the [ R Set-up 2] menu and press the four-way controller ( 5 ).
The [Copyright Information] screen appears.
2
Use the four-way controller
( 45 ) to select O or P .
Copyright Information
Embed Copyright Data
O : Embeds copyright information in the Exif.
P : Does not embed copyright information in the Exif. (default setting)
Photographer
Copyright Holder
MENU
3
Use the four-way controller ( 23 ) to select [Photographer] and press the four-way controller ( 5 ).
The text-entry screen appears.
257
9
258
4
Enter the text.
Photographer
Text selection cursor
Finish
Text input cursor
Delete One Character
MENU Cancel OK Enter
Available operations e-dial
Four-way controller
( 2345 )
| (Green) button
4 button
K / i button
Moves the text input cursor.
Moves the text selection cursor.
Switches between upper and lower case letters.
Enters a character selected with the text selection cursor at the position of the text input cursor.
Deletes a character at the position of the text input cursor.
5
After entering the text, move the text selection cursor to [Finish] and press the 4 button.
The camera returns to the [Copyright
Information] screen.
Copyright Information
Embed Copyright Data
Photographer
A A A A
Copyright Holder
9
MENU
6
Use the four-way controller ( 23 ) to select [Copyright
Holder] and enter the text in the same way as
[Photographer].
7
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
Correcting Defective Pixels in the
CMOS Sensor (Pixel Mapping)
Pixel Mapping is the function for mapping out and correcting defective pixels in the CMOS sensor.
1
Select [Pixel Mapping] in the [ R Set-up 4] menu.
2
Press the four-way controller ( 5 ).
The [Pixel Mapping] screen appears.
3
Press the four-way controller ( 2 ) to select [Pixel Mapping] and press the 4 button.
Pixel Mapping
Checks the image sensor and corrects defective pixels
Defective pixels are mapped and corrected, and the screen that was displayed before selecting the menu appears again.
Pixel Mapping
Cancel
OK OK
When the battery level is low, [Not enough battery power remaining to activate
Pixel Mapping] is displayed on the monitor. Use the AC adapter kit K-AC84
(optional) or change batteries with ample power remaining.
259
9
260
Selecting Settings to Save in the
Camera (Memory)
You can select which function settings to save when the camera is turned off. The following function settings can be saved.
• Flash Mode
• Drive Mode
• White Balance
• Sensitivity
• Cross Processing
• Digital Filter
• HDR Capture
• Shooting Info Display
• EV Compensation • Playback Info Display
• Flash Exposure Compensation • File number
9
The default setting is O for all functions except Cross Processing, Digital
Filter, HDR Capture and Shooting Info Display.
1
Select [Memory] in the [ A Rec. Mode 4] menu.
2
Press the four-way controller ( 5 ).
The [Memory 1] screen appears.
3
Use the four-way controller ( 23 ) to choose an item.
Turn the e-dial to display the [Memory 2] screen.
Memory
Flash Mode
Drive Mode
White Balance
Sensitivity
EV Compensation
Flash Exposure Comp.
Cross Processing
MENU
1 2
4
Use the four-way controller ( 45 ) to select O or P .
O : Settings are saved even when the camera is turned off.
P : Settings are cleared and returned to their default values when the camera is turned off.
5
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
• Set [File No.] to O to continue the sequential numbering for the file name even if a new folder is created. Refer to “Selecting the File Number Setting”
• When the [ R
Set-up] menu is reset (p.280), all Memory settings return to the
default values.
• If [Shooting Info Display] is set to P , the status screen is always displayed first when the camera is turned on.
261
9
262
Memo
10
Connecting to a
Computer
This chapter explains how to connect the camera to your computer, install the supplied CD-ROM, etc.
Using Captured Images on a Computer ........... 264
Saving Images on Your Computer ................... 265
Using the Provided Software ............................ 268
264
Using Captured Images on a
Computer
The captured still pictures and movies can be transferred to a computer by connecting the a using a USB cable and can be managed using the provided software.
We recommend the following system requirements to connect your camera to a computer or to use the software “PENTAX Digital Camera
Utility 4” included in the CD-ROM (S-SW99).
10
Windows
OS
CPU
RAM
Computer with Windows XP (Home Edition/Professional/x64
Edition) SP2 or later, or Windows Vista preinstalled
* With Windows 2000, you can only transfer images from your camera using a USB cable.
Pentium 4 or higher (Intel Core Processor or higher recommended)
1.0 GB or more (2.0 GB or more recommended. For Windows
Vista, 3.0 GB or more recommended)
Free Disk Space 1.0 GB or more (2.0 GB or more recommended)
Monitor
1280×1024 pixels or more with 24-bit full color (approximately
16.77 million colors)
Others USB 2.0 port must be standard equipment
Macintosh
OS
CPU
Macintosh with Mac OS X 10.3.9, 10.4, or 10.5 preinstalled
* With Mac OS X 10.2, you can only transfer images from your camera using a USB cable.
PowerPC G5 or higher (Intel Core processor recommended.
Universal Binary format)
RAM 1.0 GB or more (2.0 GB or more recommended)
Free Disk Space 1.0 GB or more (2.0 GB or more recommended)
Monitor
Others
1280×1024 pixels or more with 24-bit full color (approximately
16.77 million colors)
USB 2.0 port must be standard equipment, QuickTime 7.0 or later
Saving Images on Your Computer
Setting USB Connection Mode
Set the USB connection mode when connecting to a computer via the provided USB cable (I-USB7). The default setting is [MSC].
1
Select [USB Connection] in the [ R Set-up 2] menu and press the four-way controller ( 5 ).
2
Use the four-way controller ( 23 ) to select [MSC] or [PTP].
1 2 3 4
Brightness Level
LCD Color Tuning
Video Out
USB Connection
Folder Name
Copyright Information
±0
NTSC
MSC
PTP
MENU Cancel OK OK
3
Press the 4 button.
The setting is changed.
4
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
265
10
266
MSC and PTP
MSC (Mass Storage Class)
A general-purpose driver program that handles devices connected to the computer via USB as a memory device. Also indicates a standard for controlling USB devices with this driver.
By simply connecting a device that supports USB Mass Storage
Class, you can copy, read, and write files from a computer without installing a dedicated driver.
PTP (Picture Transfer Protocol)
A protocol that allows transfer of digital images and control of digital cameras via USB, standardized as ISO 15740.
You can transfer image data between devices that support PTP without installing a device driver.
Unless otherwise specified, select MSC when connecting the a to your computer.
Saving Images by Connecting Your Camera and Your Computer
1
Turn your computer on.
2
Turn off your camera and use the provided USB cable to connect your camera and your computer.
10
3
Turn your camera on.
The camera is recognized as a [Removable Disk] in [My Computer] for
Windows.
For Macintosh, an icon for the SD Memory Card appears on the desktop.
267
• If the [Removable Disk Drive] dialog appears when the camera is turned on, select [Open folder to view files using Windows Explorer] and click the OK button.
• When using Windows XP, if the SD Memory Card has a volume label, the volume label name appears instead of [Removable Disk]. A new unformatted
SD Memory Card may show the manufacturer’s name or model number.
4
Save the captured images to your computer.
Drag and drop the image file(s) or the folder containing the image files in your camera to the hard disk of your computer or the desktop.
5
Disconnect your camera from your computer.
10
268
Using the Provided Software
“PENTAX Digital Camera Utility 4” is included in the CD-ROM (S-SW99).
Using the PENTAX Digital Camera Utility 4, you can manage images saved on your computer and develop (process) and adjust the color of
RAW files taken with the a .
Compatible file formats: .bmp (BMP)/.jpg (JPEG)/.pef (files recorded in
PENTAX’s original RAW format)/.pct (PICT)/
.png (PNG)/.tif (TIFF)/.dng (DNG format RAW file)
10
Installing the Software
You can install the software from the provided CD-ROM.
When multiple accounts have been setup on your computer, log on with an account that has administrative rights before installing the software.
1
Turn your computer on.
Close any other software that is open.
2
Place the CD-ROM (S-SW99) into the CD-ROM drive on your computer.
The [PENTAX Software Installer] screen appears.
If the [PENTAX Software Installer] screen does not appear
• For Windows
1 Click [My Computer] from the Start menu.
2 Double-click the [CD-ROM drive (S-SW99)] icon.
3 Double-click the [Setup.exe] icon.
• For Macintosh
1 Double-click the CD-ROM (S-SW99) icon on the desktop.
2 Double-click the [PENTAX Installer] icon.
3
Click [PENTAX Digital Camera
Utility 4].
For Windows, proceed to Step 4.
For Macintosh, follow the instructions on the screen to perform subsequent steps.
4
Select the desired language in the [Choose Setup Language] screen and click [OK].
5
When the [InstallShield
Wizard] screen appears in the selected language, click
[Next].
Follow the instructions on the screen to perform subsequent steps.
269
10
270
The PENTAX Digital Camera Utility 4 Screen
When PENTAX Digital Camera Utility 4 is launched, the following screen
(browser) appears.
The screenshots used in this explanation are for Windows.
The Browser tab set (default setting)
You can perform the file management functions such as viewing and managing the images.
1
2
3 4 3
10
1 Menu Bar
This executes functions or sets various settings.
For Macintosh, the Menu bar appears at the top of the desktop.
2 Tool Bar
Frequently used functions are provided as Tool bar buttons.
5
3 Control Panel
The shooting information and settings for the selected image appear in this panel. You can switch the panel tab sets by pressing the Browser,
Laboratory and Custom buttons on the Tool bar.
4 File Display Pane
The file list or the images in the selected folder appear here.
5 Status Bar
Information on the selected item appears.
271
The Laboratory tab set (default setting)
The control panel for adjusting the image appears here.
10
272
The Custom tab set (default setting)
The screen display can be customized here. The Custom tab sets enable you to customize whether to show/hide the various tab pages in accordance with your needs. With the default settings, all control panels are displayed.
10
Viewing Detailed Information on the Software
Refer to Help for details on using the software program.
1
Click the button on the Tool bar.
Or, select [PENTAX Digital Camera
Utility Help] from the [Help] menu.
Regarding Product Registration
To better serve you, please take a moment to register your software.
Click [Product Registration] on the
273
A world map for Internet Product
Registration is displayed. If your computer is connected to the
Internet, click the displayed country or region and then follow the instructions to register your software.
10
274
Memo
11
Appendix
Default Settings .................................................. 276
Functions Available with Various Lens
Combinations ..................................................... 282
Cleaning the CMOS Sensor ............................... 285
Optional Accessories ........................................ 289
Error Messages .................................................. 293
Troubleshooting ................................................. 295
Main Specifications ............................................ 298
Glossary .............................................................. 302
Index .................................................................... 307
WARRANTY POLICY .......................................... 313
276
Default Settings
The table below shows the factory default settings.
The functions set in Memory (p.260) are saved even when the camera is
turned off.
Reset Setting
Yes: The setting returns to the default setting with the reset function
No: The setting is saved even after reset.
Direct Keys
Item Default Setting
Drive Mode
Flash Mode
White Balance
Sensitivity
Select AF Point
9 (Single Frame Shooting)
Depends on Capture mode
F (Auto)
AUTO (ISO 200 - 1600) b (5 AF Points)
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Page
11
[ A Rec. Mode] Menu
Item
Custom Image
File Format
JPEG Recorded Pixels
JPEG Quality
D-Range
Setting
Lens
Correction
Highlight Correction
Shadow Correction
Distortion Correction
Lat-Chromatic-Ab Adj
Cross Processing
Digital Filter
HDR Capture
Default Setting
Bright
JPEG
E (4288×2848)
C (Best)
P (Off)
Off
P (Off)
P (Off)
Off
Not use any filters
Off
Yes
Yes
Yes
Yes
Yes
Yes
Reset
Setting
Yes
Yes
Yes
Yes
Page
277
Item
Multiexposure
AF Mode
AE Metering
Number of Shots
Auto EV Adjustment
Select AF Point
Recorded Pixels
Quality Level
Movie Sound
Movie Aperture Control
Shake Reduction
Info Overlay
Show Grid
Live View Histogram
Bright/Dark Area
Autofocus Mode
Status Screen
Display Time
Instant
Review
Histogram
Bright/Dark Area
Color Space
RAW File Format
Green
Button
Green Button
Custom Image
Digital
Preview
Histogram
Bright/Dark
Area
Digital Filter
RAW
Button
Cancel after 1 shot
JPEG ´
RAW+
Center AF Point
Action in M Mode e-dial in Program
Default Setting
2times
P (Off) f
L (Multi-segment) b (5 AF Points)
X g (On)
Fixed l (Off)
O (On)
Yes
Yes
Yes
Yes
P (Off)
P (Off)
P (Off)
Yes
Yes
Yes
I (Face Detection AF) Yes
1
1 sec.
P (Off)
P (Off) sRGB
PEF
Green Button
—
—
P (Off)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
P (Off)
—
O (On)
JPEG ´ RAW+
—
P LINE
P SHIFT
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Page
11
278
11
Item Default Setting
Memory
Cross Processing, Digital
Filter, HDR Capture,
Shooting Info Display
Other than the above functions
Shake Reduction
Input Focal Length
P
O
(Off)
(On) k (On)
35 mm
*1 The parameters specified in [Custom Image] are also reset.
*2 The setting returns to [Green Button] after reset.
Reset
Setting
Page
Yes
Yes
Yes
Yes
Playback Mode Palette
Item Default Setting
Image Rotation
Digital Filter
Resize
Cropping
Slideshow
RAW Development
Index
Image Comparison
Protect
DPOF
—
Toy Camera
Maximum size according to the setting
Maximum size according to the setting
—
File Format: JPEG
Recorded Pixels: E
Quality Level: C
—
—
—
—
* The parameters specified in [Digital Filter] are also reset.
Reset
Setting
—
Yes
—
—
Yes
Yes
—
—
No
No
Page
[ Q Playback] Menu
Item
Slideshow
Playback
Display Method
Interval
Screen Effect
Repeat Playback
Bright/Dark Area
Quick Zoom
Default Setting
3 sec.
Off
P (Off)
P (Off)
P (Off)
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Page
279
Item
Delete All Images
Default Setting
—
Reset
Setting
—
Page
[ R Set-up] Menu
Item Default Setting
Language/ u
Date Adjustment
World Time setting
According to default setting
According to default setting
W (Hometown)
Hometown (City) According to default setting
World
Time
Hometown (DST)
Destination (City)
According to default setting
Same as Hometown
Destination (DST) Same as Hometown
According to default setting Text Size
Guide Display
Beep
Brightness Level
LCD Color Tuning
Video Out
USB Connection
Folder Name
Copyright
Information
Embed Copyright
Data
Photographer
Copyright Holder
Auto Power Off
Select Battery
Reset
3 sec.
All O (On)
±0
±0
According to default setting
MSC
Date
P (Off)
—
—
1 min.
Auto-detect
—
Pixel Mapping
Dust Alert
Dust
Removal
Dust Removal
Start-up Action
Sensor Cleaning
Format
—
—
—
P (Off)
—
—
No
No
No
No
Yes
Yes
Yes
Yes
Reset
Setting
No
No
Yes
No
No
Yes
Yes
Yes
—
—
—
Yes
—
—
No
No
Yes
Yes
—
Page
11
280
[ A Custom Setting] Menu
Item
1. EV Steps
2. Sensitivity Steps
3. Expanded Sensitivity
4. Meter Operating Time
5. AE-L with AF Locked
6. Link AE to AF Point
7. Auto Bracketing Order
8. WB When Using Flash
9. AWB in Tungsten Light
10. AF/AE-L Button
11. AF with Remote Control
12. Remote Control in Bulb
13. Slow Shutter Speed NR
14. High-ISO NR
15. High-ISO NR Start Level
16. Release While Charging
17. Flash in Wireless Mode
18. Saving Rotation Info
19. Auto Image Rotation
20. Power lamp
21. Catch-in Focus
22. Using Aperture Ring
Reset Custom Functions
Default Setting
1/3 EV Steps
1 EV Step
Off
10 sec.
Off
Off
0 - +
Auto White Balance
Subtle Correction
Enable AF1
Off
Mode1
On
Medium
ISO 800
Off
On
On
On
Standard
Off
Prohibited
—
Page
—
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
—
Yes
Yes
Yes
Yes
Yes
11
Resetting the Menu
Resetting Rec. Mode/Playback/Set-up Menu
Settings in the [ A Rec. Mode] menu, [ Q Playback] menu, [ R Set-up] menu, direct keys and playback mode palette can be reset to default settings.
281
Language/ u , Date Adjustment, the city and DST settings for World Time,
Text Size, Video Output, Copyright Information and [ A Custom Setting] menu settings are not reset.
1
Select [Reset] in the [ R Set-up 3] menu and press the fourway controller ( 5 ).
The [Reset] screen appears.
2
Press the four-way controller ( 2 ) to select [Reset] and press the
4 button.
The settings are reset, and the screen that was displayed before selecting the menu appears again.
Reset
Returns to default settings
Reset
Cancel
OK OK
Resetting the Custom Menu
Reset settings in [ A Custom Setting] menu to default values.
1
Select [Reset Custom Functions] in the [ A Custom
Setting 4] menu and press the four-way controller ( 5 ).
The [Reset Custom Functions] screen appears.
2
Press the four-way controller ( 2 ) to select [Reset] and press the
4 button.
Reset Custom Functions
Returns the custom function settings to default values
The settings are reset, and the screen that was displayed before selecting the menu appears again.
Reset
Cancel
OK OK
11
282
Functions Available with Various
Lens Combinations
11
Only DA, DA L and FA J lenses and D FA/FA/F/A lenses which have an s
(Auto) position on the aperture ring can be used with factory default
settings. Refer to “Notes on [22. Using Aperture Ring]” (p.284) for other
lenses and D FA/FA/F/A lenses with aperture ring set to a position other than s .
z : Functions are available when the aperture ring is set to the s position.
# : Some functions are restricted.
× : Functions are unavailable.
Lens
[Mount type]
Function
Autofocus
(Lens only)
(With AF adapter 1.7×)
Manual focus
(With matte field)
Quick-Shift Focus System
Five AF points/Eleven AF points
Multi-segment metering e (Program) mode
K (Sensitivity Priority) mode b (Shutter Priority) mode c (Aperture Priority) mode a (Manual) mode
Power Zoom
Automatic obtaining the lens focal length information when using the Shake
Reduction function
Lens Correction function
DA
DA L
D FA
[K
AF
]
[K
AF2
]
[K
AF3
] z
– z z z z z z
#
z z z z
– z z
FA J
[K
[K
×
×
×
AF
AF2 z
– z z z z z z z z z z z
]
]
F
[K
AF z
– z z
× z z z z z z z z
– z
×
]
A
[K
–
# z z z z
×
#
×
× z × z
#
z #
z #
z #
z
# z ×
– –
×
×
A
]
M
P
[K]
– z
×
×
*1 Lenses with a maximum aperture of f/2.8 or brighter. Only available at the s position.
*2 Lenses with a maximum aperture of f/5.6 or brighter.
*3 When using the built-in flash and AF540FGZ, AF360FGZ, AF200FG or AF160FC.
*4 Aberration correction is available in [Lens Correction] of the [ A Rec. Mode 1] menu. The
[Distortion Correction] setting is disabled when using a DA 10-17mm FISH-EYE lens.
*5 Only available with compatible lenses.
*6 To use an F/FA SOFT 85 mm f/2.8 lens or FA SOFT 28 mm f/2.8 lens, set [22. Using
A Custom Setting 4] menu to [Permitted]. Pictures can be taken with the aperture you set, but only within manual aperture range.
*7 The AF point is fixed to O (Spot).
*8 c (Aperture Priority) Automatic Exposure with the aperture open. (Adjusting the aperture ring has no effect on the actual aperture value.)
283
Lens names and mount names
DA lenses with an ultrasonic motor and FA zoom lenses with power zoom use the K
AF2
mount. DA lenses with ultrasonic motor and no AF coupler use the K
AF3
mount.
FA prime lenses (non-zoom lenses), DA or DA L lenses without ultrasonic motors and D FA, FA J and F lenses use the K
AF
mount.
Refer to the lens manual for details. Note that this camera is not equipped with a power zoom function.
Lenses and accessories that cannot be used with this camera
When the aperture ring is set to other than the s (Auto) position or a lens without an s position or accessories such as an auto extension tube or
auto bellows are used, the camera will not operate unless [22. Using
Aperture Ring] is set to [Permitted] in the [
A Custom Setting 4] menu.
Refer to “Notes on [22. Using Aperture Ring]” (p.284) for restrictions that
apply.
All camera capture modes are available when using DA/DA L/FA J or lenses with an aperture s position set to the s position.
Lens and Built-in Flash
The built-in flash cannot be regulated and fully discharges when A lenses not set to the s (Auto) position, pre A lenses or soft focus lenses are used.
Note that the built-in flash cannot be used as an Auto Flash.
11
284
Notes on [22. Using Aperture Ring]
11
When [22. Using Aperture Ring] is set to
[Permitted] in the [ A Custom Setting 4] menu, the shutter can be released even if the aperture ring of the D FA, FA, F or A lens is not set to the s (Auto) position or a lens without an s position is attached. However, the features will be restricted as shown below.
22.
Using Aperture Ring
1
2
Prohibited
Permitted
Shutter will release when aperture ring is not set to the
"A" position
MENU Cancel OK OK
Restrictions on using lenses with aperture ring set to a position other than s
Lens Used
Exposure
Mode
Restriction
D FA, FA, F, A, M (lens only or with auto diaphragm accessories such as auto extension tube K) c (Aperture
Priority) mode
D FA, FA, F, A, M, S (with diaphragm accessories such as extension tube K)
Manual diaphragm lens such as reflex lens (lens only) c (Aperture
Priority) mode c (Aperture
Priority) mode
FA, F SOFT 85mm, FA
SOFT 28mm (lens only)
All lenses
The aperture remains open regardless of the aperture ring position. The shutter speed changes in relation to the open aperture but an exposure error may occur. In the viewfinder,
[F--] appears for the aperture indicator.
Pictures can be taken with the specified aperture value but an exposure error may occur. In the viewfinder, [F--] appears for the aperture indicator.
c (Aperture
Priority) mode a (Manual) mode
Pictures can be taken with the specified aperture value in the manual aperture range. In the viewfinder, [F--] appears for the aperture indicator.
When the depth of field is checked
(Optical Preview), exposure metering starts and the exposure can be checked.
Pictures can be taken with the set aperture value and shutter speed. In the viewfinder, [F--] appears for the aperture indicator. When the depth of field is checked (Optical Preview), exposure metering starts and the exposure can be checked.
The camera operates in c (Aperture Priority) mode regardless of the mode dial setting other than a (Manual) mode when the aperture is set to other than the s position.
Cleaning the CMOS Sensor
Shadows may appear in the image on white backgrounds and other shooting conditions if the CMOS sensor becomes dirty or dusty. This indicates that the CMOS sensor must be cleaned.
Removing Dust by Shaking the CMOS Sensor
(Dust Removal)
Shaking the CMOS sensor removes dust that has collected.
1
Select [Dust Removal] in the [ R Set-up 4] menu and press the four-way controller ( 5 ).
The [Dust Removal] screen appears.
2
Press the 4 button.
The Dust Removal function is activated by shaking the CMOS sensor.
To activate the Dust Removal function every time the camera is turned on, select
[Start-up Action] and use the four-way controller ( 45 ) to select O .
When Dust Removal is completed, the camera returns to the [ R Set-up 4] menu.
Dust Removal
Dust Removal
Start-up Action
MENU OK Start
285
11
286
11
Detecting Dust on the CMOS Sensor
(Dust Alert)
Dust Alert is the function that detects dust adhering to the CMOS sensor and visually displays the location of the dust.
You can save the detected image and display it when performing sensor
The following conditions must be met before using the Dust Alert function:
- A DA, DA L, FA J lens or a D FA, FA and F lens that has an Aperture s (Auto) position is attached.
- The aperture is set to the s position when using a lens with an aperture ring.
- The mode dial is set to any mode other than C (Movie).
- The focus mode lever is set to = .
1
Select [Dust Alert] in the [ R Set-up 4] menu and press the four-way controller ( 5 ).
The [Dust Alert] screen appears.
2
Fully display a white wall or uniformly bright subject in the viewfinder and press the shutter release button fully.
Dust Alert
Checks for dust on the sensor.
Press shutter release button to reveal dust location
After image processing is performed, the
Dust Alert image appears.
If the message [The operation could not be completed correctly] is displayed,
MENU press the 4 button and take another picture.
3
Press the 4 button.
The image is saved and the camera returns to the [ R Set-up 4] menu.
SHUTTER Check
OK
• The exposure time may be extremely long when using the Dust Alert function. Note that if the direction of the lens is changed before processing is complete, dust will not be detected properly.
• Depending on the subject conditions or temperature, dust may not be detected properly.
• The Dust Alert image can only be displayed during sensor cleaning within 30 minutes from the time the image is saved. If 30 minutes elapse, save a new
Dust Alert image and then perform sensor cleaning.
• The saved Dust Alert image cannot be displayed in Playback mode.
• The Dust Alert image cannot be saved when an SD Memory Card is not inserted.
• Regardless of the camera settings, the Dust Alert image will be taken with specific shooting conditions.
• Press the M button or turn the e-dial when the Dust Alert image is displayed to view it at full screen display.
287
Removing Dust with a Blower
Raise the mirror up and open the shutter when cleaning the CMOS sensor with a blower.
Please contact PENTAX Service Center for professional cleaning because the CMOS sensor is a precision part. Cleaning services involve a fee.
You can use the optional Imagesensor Cleaning kit O-ICK1 (p.292) when
cleaning the CMOS sensor.
• Do not use a spray type blower.
• Do not clean the sensor when the shutter speed is set to h .
• Always cap the lens mount area to prevent dirt and dust from accumulating on the CMOS sensor when no lens is on the camera.
• When the battery level is low, the message [Not enough battery power remaining to clean sensor] is displayed on the monitor.
• It is recommended to use the AC adapter kit K-AC84 (optional) when cleaning the sensor. If you are not using the AC adapter kit K-AC84 (optional), please change batteries with ample power remaining. If the battery capacity becomes low during cleaning, a warning beep will sound. Please stop cleaning immediately.
• Do not put the tip of the blower inside the lens mount area. If the power is turned off, this may cause damage to the shutter, CMOS sensor or the mirror.
11
288
• The self-timer lamp blinks while cleaning the sensor.
• This camera features a CMOS sensor shifting shake reduction system, and it may generate a vibration sound while cleaning the CMOS sensor. It is not a malfunction.
1
Turn the camera off and remove the lens.
2
Turn the camera on.
3
Select [Sensor Cleaning] in the [ R Set-up 4] menu and press the four-way controller ( 5 ).
The [Sensor Cleaning] screen appears.
4
Use the four-way controller
( 23 ) to select [Mirror Up] and press the 4 button.
Sensor Cleaning
Raises mirror and open shutter for access to clean sensor.
Turn the power off to finish The mirror is locked in the up position.
If you used Dust Alert to detect dust on the sensor within the last 30 minutes, the
Dust Alert image appears on the monitor.
Clean the sensor while checking the location of the dust.
5
Clean the CMOS sensor.
Use a brush-less blower to remove dirt and dust from the CMOS sensor. Using a blower with a brush may scratch the
CMOS sensor. Do not wipe the CMOS sensor with a cloth.
Mirror Up
Cancel
OK OK
11
6
Turn off the camera.
7
Attach the lens after the mirror returns to its original position.
Optional Accessories
A number of dedicated accessories are available for this camera. Please contact a PENTAX Service Center for details regarding accessories.
Products marked with an asterisk (*) are the same as those supplied with the camera.
Power Supply Accessories
AC Adapter kit K-AC84
(Set includes AC ADAPTER D-AC76, DC COUPLER D-DC84 and AC plug cord.)
Lets you power your camera from an AC outlet.
Flash Accessories
Auto Flash AF540FGZ
Auto Flash AF360FGZ
The AF540FGZ and AF360FGZ are
P-TTL auto flash units with a maximum guide number of 54 and 36 (ISO 100/m), respectively. Their features include slave-sync flash, contrast-control-sync flash, high-speed sync flash, wireless flash, slow-speed sync and trailing curtain sync flash.
AF540FGZ
289
11
AF360FGZ
290
Auto Flash AF200FG
The AF200FG is a P-TTL auto flash unit with a maximum guide number of 20
(ISO 100/m). It features contrastcontrol-sync flash and slow-speed sync flash when combined with an
AF540FGZ or AF360FGZ unit.
Auto Macro Flash AF160FC
The AF160FC is a flash system especially designed for macro photography to take close, shadowless pictures of small objects. It is compatible with existing TTL auto flash functions and it can be used with a wide range of
PENTAX cameras by using the provided adapter rings.
Hot Shoe Adapter F
G
Extension Cord F5P
AF200FG
AF160FC
Hot Shoe Adapter F
G
Off-Camera Shoe Adapter F
Use the adapters and cords to use the external flash away from the camera.
11
Off-camera Shoe Clip CL-10
When using the AF540FGZ or
AF360FGZ as a wireless flash, this large clip is used for setting the external flash on a desk or table.
Off-camera Shoe Adapter F
Off-camera Shoe Clip CL-10
291
For Viewfinder
Magnifier F
B
This viewfinder accessory is for magnifying the central area of the viewfinder 2×.
You can see the entire view by simply flipping up the accessory from the eyepiece, as it is a hinge-type magnifier.
Ref-converter A
This is an accessory that changes the viewfinder viewing angle at 90° intervals. The viewfinder magnification can be switched between 1× and 2×.
Magnifier F B
Ref-converter A
Diopter correction lens adapter M
This accessory adjusts the diopter.
Install it on the viewfinder.
If it is difficult to see the viewfinder image clearly, choose one of the eight correction of approximately –5 to
+3 m –1 (per meter).
Eyecup F
Q
(*)
Diopter correction lens adapter M
Remote Control F
Lets you shoot pictures from within 4 m of the front of the camera.
11
292
Camera Case/Strap
Camera Case O-CC84
Camera Strap O-ST53 (*)
Imagesensor Cleaning Kit O-ICK1
Use this kit to clean the optical parts such as the CMOS sensor and lens of this camera.
Others
Body Mount Cap K
Hot Shoe Cover F
K
(*)
USB Cable I-USB7 (*)
AV Cable I-AVC7
11
Error Messages
293
Error Message
Memory card full
No image
This image cannot be displayed
No card in the camera
Memory card error
Card is not formatted
Card is locked
The card is electronically locked
This image cannot be enlarged
This image is protected
Battery depleted
Description
The SD Memory Card is full and no more images can be saved. Insert a new SD Memory
Card or delete unwanted images. (p.44, p.75)
Data may be saved when you perform the following operations.
• Change the file format to JPEG. (p.177)
• Change the JPEG Recorded Pixels or JPEG
Quality setting. (p.174, p.175)
There are no images that can be played back on the SD Memory Card.
You are trying to play back an image in a format not supported by this camera. You may be able to play it back on another brand of camera or your computer.
The SD Memory Card is not inserted in the
The SD Memory Card has a problem, and image capture and playback are impossible. It may be viewable on a computer but not with this camera.
The SD Memory Card you have inserted is unformatted or has been formatted on another device and is not compatible with this camera.
Use the card after formatting it with this camera.
The write-protect switch on the SD Memory
Card you have inserted is locked. Unlock the
Data is protected by the SD Memory Card security feature.
You are trying to enlarge an image that cannot be enlarged.
You are trying to delete an image that is protected. Remove protection from the image.
The batteries are exhausted. Install new
batteries in the camera. (p.39)
11
294
11
Error Message
Not enough battery power remaining to clean sensor
Not enough battery power remaining to activate Pixel Mapping
Image folder cannot be created
Unable to store image
Settings not stored
The operation could not be completed correctly
No more images can be selected
This RAW file cannot be developed
This image cannot be processed
The camera failed to create an image
Camera overheated.
Disabling Live View temporarily to protect circuitry
This function is not available in the current mode
Description
Appears during sensor cleaning if the battery level is insufficient. Replace the batteries with new ones or use the AC adaptor kit K-AC84
Appears during Pixel Mapping if the battery level is insufficient. Replace the batteries with new ones or use the AC adaptor kit K-AC84
The maximum folder number (999) and file number (9999) are being used, and no more images can be saved. Insert a new SD Memory
Card or format the card. (p.242)
The image could not be saved because of an
SD Memory Card error.
The DPOF settings could not be saved because
SD Memory Card is full. Delete unwanted images and perform DPOF settings again.
The camera was unable to measure the manual white balance or detect dust on the sensor. Try
the operation again. (p.184, p.286)
You cannot select 100 or more images at a time
for Index (p.207) and Select & Delete (p.215).
RAW files captured with other cameras cannot be edited on this camera.
Appears when Resize (p.224), Cropping
(p.225), Digital Filter (p.227), or RAW
Development (p.233) is started for images
captured with other cameras, or when Resize or
Cropping is started for minimum size images.
The creation of an index print image failed.
Live View cannot be used because the camera’s internal temperature is too high.
Press the 4 button and try using Live View again when the camera has cooled down.
You are trying to set a function that is not available in Picture mode, H (Scene) mode or
C (Movie) mode.
Troubleshooting
295
In rare cases, the camera may not operate correctly due to static electricity. This can be remedied by taking the batteries out and putting them back in again. When the mirror remains in the up position, take the batteries out and put them back in again. Then, turn the power on. The mirror will retract. After these procedures are done, if the camera operates correctly, it does not require any repairs.
We recommend checking the following items before contacting a service center.
Problem
The camera does not turn on
The shutter cannot be released
The
Autofocus does not work
Cause
Batteries are not installed
Batteries are not installed properly
The battery power is low
The lens aperture ring is set to other than the s position
Remedy
Check if batteries are installed. If not, install charged batteries.
Check the orientation of batteries.
Re-insert batteries according to the +-
Replace with charged batteries or use the
AC adapter kit K-AC84 (optional). (p.42)
Set the lens aperture ring to the s position
(p.94) or select [Permitted] in [22. Using
A Custom Setting 4]
The built-in flash is charging
There is no available space on the SD
Memory Card
Recording
The subject is difficult to focus on
Wait until charging is finished.
Insert an SD Memory Card with available
space or delete unwanted images. (p.44,
Wait until recording is finished.
Autofocus cannot focus well on subjects that have low contrast (the sky, white walls, etc.), dark colors, intricate designs, rapidlymoving objects or scenery shot through a window or a net-like pattern. Lock focus on another object located at the same distance as your subject, then aim at the target and press the shutter release button fully.
Alternatively, use manual focus. (p.121)
11
296
11
Problem
The
Autofocus does not work
The focus cannot be locked close
Cause
The subject is not in the focusing area
The subject is too
The focus mode is set to \
Remedy
Position the subject in the focus frame in the middle of the viewfinder. If the subject is outside the focusing area, aim the camera at the subject and lock the focus, then compose a picture and press the shutter
Move away from the subject and take a picture.
Set the focus mode lever to =
[AF Mode] is set to k
The Capture mode is set to or l in
\ mode, or
in Picture n
H
, R , Y
mode.
Autofocus is not locked (focus lock) when
[AF Mode] is set to k (including when the k setting is automatically selected in f ). The camera will continue focusing on the subject while the shutter release button is pressed halfway. If there is a subject that you want to focus on, set [AF
Mode] to l (Single mode) and use the
Set Capture mode to any setting other than
\ (Moving Object) in Picture mode, or n (Stage Lighting), R (Kids), Y (Pet) or l (Night Snap) in H (Scene) mode.
The AE lock function does not operate
The shutter speed is set to h
Set the shutter speed to any mode other than h
The built-in flash does not discharge
When the flash mode is set to C or
C , the flash will not discharge if the subject is bright
The mode dial is set to a
H
A
E
,
mode is set to
K , n , U or
Set the flash mode to b (Manual Flash
Discharge) or D (Manual Flash+Red-eye
Set mode dial to any setting other than a
Set H (Scene) mode to any setting other than A (Night Scene), K (Sunset), n (Stage Lighting), U (Candlelight) or
E
The power zoom system does not work
The camera does not have the power zoom function
Problem
The USB connection with a computer does not work properly
Cause Remedy
The USB connection mode is set to [PTP]
Set [USB Connection] in the [ R Set-up 2]
Shake
Reduction does not work
The Shake
Reduction function is off
Set [Shake Reduction] to on. (p.129)
The Shake
Reduction function is not set properly
If a lens for which the focal length information cannot be obtained is used, set the focal length in the [Input Focal Length]
Shutter speed is too low for the Shake
Reduction function to be effective when panning or shooting night scenes, etc.
The subject is too close
Set [Shake Reduction] to off and use a tripod.
Move away from the subject, or turn off the
Shake Reduction function and use a tripod.
297
11
298
Main Specifications
11
Type
Effective Pixels
Sensor
Recorded Pixels
TTL autofocus, auto-exposure SLR digital-still camera with built-in retractable P-TTL flash
Approx. 12.4 megapixels
Total pixels approx. 12.9 megapixels, CMOS with a primary color filter
Still picture: E (RAW/JPEG: 4288×2848 pixels), J (3936×2624 pixels), P (3072×2048 pixels), i (1728×1152 pixels)
Movie: X (1280×720 pixels), Y (640×416 pixels)
Sensitivity
(Standard output sensitivity)
Auto, Manual (ISO 200 to 6400 (EV steps can be set to 1 EV, 1/3
EV or 1/2 EV))
File Format
RAW (PEF/DNG), JPEG (Exif 2.21), DCF 2.0 compliant,
DPOF compatible, Print Image Matching III compatible,
RAW+JPEG simultaneous capturing compatible, For movies: AVI
C (Best), D (Better), and E (Good) JPEG Quality
Storage Medium SD Memory Card, SDHC Memory Card
Approximate Number of Shots
Recorded
Pixels
E
4288×2848
File Format/
JPEG Quality
|
|
(PEF)
(DNG)
SD Memory Card Capacity
4 GB 2 GB 1 GB 512 MB 256 MB 128 MB
194 98 48 24 12 6
192 98 48 24 12 6
E
4288×2848
J
3936×2624
C
D
E
C
D
E
C
D
553
973
1915
652
1149 585
2234 1138
1068
1856
543
945
281
495
975
332
289
564
267
468
138
244
479
163
144
282
133
234
69
122
239
81
72
142
67
118
35
61
120
41
P
3072×2048 i
1728×1152
E
C
D
E
3549
3176
5485
10057
1807
1617
2793
5121
902
805
1373
2518
450
402
686
1258
227
203
346
634
JPEG Quality (Compression): C (Best) = 1/4.5, D (Better) = 1/8, E (Good) = 1/16
* The number of storable images may vary depending on the subject, shooting conditions, shooting mode and SD Memory Card, etc.
116
104
177
325
37
73
34
60
17
31
61
21
299
Approximate Movie Recording Time
Recorded
Pixels
X
1280×720
Y
640×416
Quality
C
D
E
C
D
E
SD Memory Card Capacity
4 GB 2 GB 1 GB 512 MB 256 MB 128 MB
11 min.
45 sec.
5 min.
49 sec.
2 min.
56 sec.
1 min.
28 sec.
44 sec. 22 sec.
16 min.
29 sec.
23 min.
07 sec.
8 min.
23 sec.
11 min.
46 sec.
4 min.
08 sec.
5 min.
49 sec.
2 min.
04 sec.
2 min.
54 sec.
1 min.
02 sec.
1 min.
28 sec.
32 sec.
45 sec.
39 min.
26 sec.
54 min.
21 sec.
1 hr.
14 min.
29 sec.
20 min.
05 sec.
27 min.
41 sec.
37 min.
56 sec.
9 min.
52 sec.
13 min.
47 sec.
19 min.
00 sec.
4 min.
56 sec.
6 min.
53 sec.
9 min.
29 sec.
2 min.
29 sec.
3 min.
28 sec.
4 min.
47 sec.
1 min.
16 sec.
1 min.
47 sec.
2 min.
27 sec.
* Movie recording time is based on our standard measuring conditions. The above figures may vary depending on the subject, shooting conditions and SD Memory Card, etc.
White Balance
Monitor
Playback Function
Exposure Mode
Shutter
Auto, Daylight, Shade, Cloudy, Fluorescent Light (D: Daylight
Color, N: Daylight White, W: Cool White, L: Warm White),
Tungsten Light, Flash, CTE, Manual, fine tuning available
2.7 inch wide viewing field TFT color LCD with approx. 230,000 dots, brightness and color adjustment functions
Single frame, Multi-image display, zoom display (up to 16 times, scrolling possible), image comparison, rotating, calendar display, folder display, slideshow, histogram, bright/dark area, resize, cropping, index (Thumbnails/Square/Random 1/Random 2/
Random 3/Bubble) e Program, K Sensitivity priority, b Shutter priority, c Aperture priority, a Manual, C Movie
Picture mode: I Auto Picture, = Portrait, s Landscape, q Macro, \ Moving Object, .
Night Scene
Portrait, a Flash Off (When shooting with Live
View, d (Blue Sky) and K (Sunset) can also be selected.)
Scene mode: A Night Scene, Q Surf & Snow, K Food,
K Sunset, n Stage Lighting, R Kids, Y Pet,
U Candlelight, E Museum, l Night Snap
Electronically controlled vertical-run focal-plane shutter, Speed range (1) Auto 1/6000 to 30 sec. (stepless), (2) Manual 1/6000 to
30 sec. (Selectable between 1/3 EV and 1/2 EV for EV steps),
Bulb, Electromagnetic release, Shutter lock by setting the main switch to OFF position
11
300
Lens Mount
Lens Used
Autofocus
System
Viewfinder
Viewfinder
Indicator
Preview Function
Continuous
Shooting (Hi/Lo)
Self-timer
Remote Control
Mirror
11 Digital Filter
Custom Image
Exposure
Bracketing
Multi-exposure
PENTAX K
AF2
bayonet mount (AF coupler, lens information contacts, K-mount with power contacts)
PENTAX K AF3 mount lenses, K AF2 mount lenses (power zoom not available), K
AF
mount lenses, K
A
mount lenses
TTL phase-matching autofocus system, SAFOX VIII (11-point
AF), AF operational brightness range: EV –1 to 18 (at ISO 100 with f/1.4 lens), Focus lock available, Focus Mode: f (Auto)/ l (Single)/ k (Continuous)/ \
Penta-mirror viewfinder, Natural-Bright-Matte II focusing screen,
Field of view: approx. 96%, Magnification: approx. 0.85× (with 50 mm f/1.4 lens at ∞ ), Diopter: approx. –2.5 to +1.5m
-1 (per meter)
Focus information: ] is displayed when in-focus and blinking when unable to focus, b is lit = Built-in flash ready, b is blinking
= Flash should be used, Shutter speed, Sensitivity, Aperture value, e-dial enabled indicator, @ = AE lock, Capacity remaining, m = EV Compensation, \ = Manual focus, Picture mode icon,
Shake Reduction display
Live View: TTL method using the image sensor, Zoom
Display and Show Grid are available
Optical Preview: Depth of field confirmation (electronically controlled and available in all exposure modes)
Digital Preview: Composition, exposure, focus and white balance confirmation
Approx. 4.7 fps (JPEG ( E , C , Hi): up to 17 frames, RAW: up to 5 frames)
Approx. 2 fps (JPEG ( E , C , Lo): until SD Memory Card is full, RAW: up to 11 frames)
Electronically controlled with delay time of 12 sec./2 sec. (with the mirror lock-up function). Start by pressing the shutter release button. Operation confirmation: Possible to set beep. Can be cancelled after activation.
PENTAX Remote Control F (optional) Release shutter immediately or three seconds after pressing the remote control shutter release button
Quick-return mirror, mirror lock-up function (2 sec. self-timer)
Toy Camera, Retro, High Contrast, Extract Color, Soft, Star Burst,
Fish-eye, Monochrome, Color, Water Color, Pastel, Slim,
Miniature, HDR, Base Parameter Adj, Custom Filter
Image Tone (7 types), Saturation, Hue, Contrast, Sharpness/Fine
Sharpness, High/Low Key Adj, Filter Effect, Toning
Three frames (underexposed, standard (proper exposure) and overexposed) are shot continuously with exposure bracketing.
(Selectable between 1/3 EV and 1/2 EV for EV steps)
Select the number of shots between 2 and 9 (Auto EV Adjustment can be set according to the number of shots)
301
Exposure Meter/
Exposure Range
TTL multi (16-segment metering), Exposure range from EV 1 to
EV 21.5 at ISO 200, with 50 mm f/1.4 lens, Center-weighted or
Spot metering method can be set
EV Compensation ±3 EV (1/3 EV, 1/2 EV Steps), EV Steps can be selected
AE Lock
Built-in Flash
External Flash
Sync
Can be assigned to the = / L button using the custom function setting (timer type: two times the meter operating time set in the custom function setting) Continuous as long as the shutter release button is halfway pressed.
P-TTL built-in flash with serial control, GN approx. 16 (ISO 200),
Angles of coverage: 28 mm lens angle of view (35 mm equivalent), Flash synchronization speed range at 1/180 sec. and slower, Daylight-sync flash, Slow-speed Sync flash, Auto-popup function
Hot shoe with M -contact, which couples with PENTAX dedicated auto flashes, ISO range = P-TTL: 100 to 1600, Automatic flash,
Red-eye reduction flash function, High-speed-sync and wirelesssync with PENTAX dedicated flash
Custom Function
Time Function
Shake Reduction
Function
Dust Removal
22 functions can be set
World Time settings for 75 cities (28 time zones)
CMOS Image Sensor Shift, effective compensation range = up to
4 EV (dependent on the used lens type and shooting conditions)
SP coating and CMOS sensor operations for dust removal. Can be set to operate when the camera is turned on.
Power Four AA lithium, AA Ni-MH rechargeable, or AA alkaline batteries
Battery Exhaustion Battery exhaustion symbol z is lit.
PC/AV terminal (USB 2.0 (high speed compatible)) In/Out Port
Video Output
Format
NTSC/PAL
Dimensions and
Weight
Accessories
Languages
Approx. 122.5 mm (W) × 91.5 mm (H) × 67.5 mm (D) (excluding protrusions), approx. 515 g (body only), approx. 580 g (including four AA lithium batteries and an SD Memory Card), approx. 615 g
(including four AA alkaline batteries and an SD Memory Card)
Hot shoe cover F
K
, Eyecup F
Q
, Body mount cover, USB cable
I-USB7, Software (CD-ROM) S-SW99 (PENTAX Digital Camera
Utility 4), Strap O-ST53, AA lithium batteries (four), Operating
Manual (this book)
English, French, German, Spanish, Portuguese, Italian, Dutch,
Danish, Swedish, Finnish, Polish, Czech, Hungarian, Turkish,
Greek, Russian, Korean, Chinese (Traditional/Simplified) and
Japanese
11
302
Glossary
AdobeRGB
Color space recommended by Adobe Systems, Inc. for commercial printing. Wider range of color reproduction than sRGB. Covers most of the color range so colors available only when printed are not lost when editing images on a computer. When image is opened by non-compatible software, the colors look lighter.
AE Metering
Brightness of subject is measured to determine exposure. In this camera, select from [Multi-segment Metering], [Center-weighted Metering] and
[Spot Metering].
AF point
Position in the viewfinder that determines focus. In this camera, select from [Auto], [Select] and [Spot].
Aperture
The aperture increases or reduces the light beam (thickness) passing through the lens to the CMOS sensor.
Bright Portion
Overexposed area in the image loses contrast and appears white.
11
Camera Shake (Blur)
When the camera moves while the shutter is open, the entire image appears blurred. This occurs more often when shutter speed is low.
Prevent camera shake by raising the sensitivity, using the flash, and raising the shutter speed. Alternatively, use a tripod to stabilize the camera. As camera shake is most likely to occur when pressing the shutter release button, use the Shake Reduction function, the self-timer or the remote control unit to prevent camera movement.
CMOS sensor
Photography element which converts the light entering through the lens into electric signals that create the image.
303
Color Space
A defined range of colors from the spectrum which are used. In digital cameras, [sRGB] is defined as the standard by Exif. In this camera,
[AdobeRGB] is also used because of the richer color expression over sRGB.
Color Temperature
This numerically expresses the color of the light source illuminating the subject. This is indicated in absolute temperature, using Kelvin (K) units.
The color of light shifts to a bluish color as the color temperature rises, and to a reddish color as the color temperature falls.
Dark Portion
Underexposed area in the image loses contrast and appears black.
DCF (Design rule for Camera File system)
A digital camera file system standard established by the Japan Electronics and Information Technology Industries Association (JEITA).
Depth of field
Area of focus. This depends on the aperture value, lens focal length, and distance to the subject. For example, select a smaller aperture value
(higher number) to increase the depth of field or use a larger aperture value (smaller number) to decrease the depth of field.
DNG RAW file
DNG (Digital Negative) is a general-purpose RAW file format designed by
Adobe Systems. When images captured in proprietary RAW formats are converted to DNG format, support and compatibility for the images increases significantly.
DPOF (Digital Print Order Format)
Rules for writing information onto a card with recorded images regarding the specific images and number of copies to be printed. Prints can easily be made by taking the images to a DPOF photo printing store.
11
304
Dynamic Range (D-Range)
Indicated with a value expressing the light level reproducible in an image.
This is the same as the term “Exposure latitude” used with silver halide film.
Generally, when the dynamic range is wide, overexposed and/or underexposed areas are less likely to occur within the image, and when the dynamic range is narrow, all image tones can be reproduced sharply and accurately.
EV (Exposure Value)
Exposure value is determined by the combination of the aperture value and the shutter speed.
EV Compensation
Process of adjusting the image brightness by changing the shutter speed and/or aperture value.
Exif (Exchangeable image file format for digital still camera)
A standard digital camera file format established by the Japan Electronics and Information Technology Industries Association (JEITA).
Exposure Bracketing
For automatically changing exposure. When the shutter release button is pressed, three images are captured. The first one has no compensation, the second is underexposed and the third is over-exposed.
Histogram
A graph that shows the darkest and brightest points in an image. The horizontal axis represents the brightness and the vertical axis represents the number of pixels. This is useful when you wish to refer to the exposure status of an image.
11
ISO Sensitivity
The level of sensitivity to light. With a high sensitivity, images can be shot with a high shutter speed even in dark places, reducing camera shake.
However, images taken with a high sensitivity are more susceptible to noise.
305
JPEG
An image compression method. In this camera, select from C (Best),
D (Better), or E (Good). Images recorded in JPEG format are suited for viewing on your computer or for attaching to e-mail.
ND (Neutral Density) Filter
A filter available in different saturation levels that adjusts the brightness without affecting the color tone of pictures.
Noise Reduction
Process to reduce noise (image roughness or unevenness) caused by slow shutter speed or high sensitivity shooting.
NTSC/PAL
These are video output formats. NTSC is mainly used in Japan, North
America, and South Korea. PAL is mainly used in Europe and in China.
Quality Level
This refers to the image compression ratio. The lower the compression, the more detailed the image. The image becomes rougher as the compression rate rises.
RAW data
Unedited image data output from the CMOS sensor. RAW data are data before being internally processed by the camera. Camera settings at the time of capture, such as White Balance, Contrast, Saturation, and
Sharpness can be set for each frame after shooting. In addition, RAW data are 12 bit data that contain 16 times the information of 8 bit JPEG data.
Rich gradations are possible. Transfer RAW data to your computer and use the provided software to create image data with different settings, such as JPEG.
Recorded Pixels
Indicates the size of the image by the number of pixels. The more pixels that compose a picture, the larger the image size.
Shutter Speed
The length of time that the shutter is open and light strikes the CMOS sensor. The amount of light that strikes the CMOS sensor can be changed by altering the shutter speed.
11
306 sRGB (standard RGB)
International standard of color space established by the IEC (International
Electrotechnical Commission). This is defined from color space for computer monitors and is also used as the standard color space for Exif.
Vignetting
The picture edges are blackened when part of the light coming from the subject is blocked by the hood or filter ring, or when the flash is partially blocked by the lens.
White Balance
While shooting, color temperature is adjusted to match the light source so that the subject appears to have correct color.
11
Index
307
Symbols
[ Q Playback] Menu .... 201, 278
Set-up] Menu ......... 240, 279
....................................... 81, 280
................................... 19, 21, 74
(Green) button ..... 19, 21, 179
button ............................. 19, 107
button ................... 19, 21, 67, 75
I Auto Picture ................. 84
\ Moving Object ................... 84
A Night Scene ...................... 85
Q Surf & Snow ..................... 85
K Food .................................. 85
K Sunset ............................. 85 n Stage Lighting .................. 85
R Kids .................................... 85
Y Pet .................................... 85
U Candlelight ........................ 85
E Museum ........................... 85 l Night Snap ........................ 85
C Movie .............................. 150
A
AC adapter ............................. 42
Accessories ......................... 289
Action in a Mode ................ 102
Adding the date ....................256
AdobeRGB ...................187, 302
AE Lock ................102, 108, 120
AE Metering ..................104, 302
= (Autofocus) ....................112
AF Mode ...............................115
AF point ........................117, 302
AF160FC ......................162, 290
AF200FG ......................162, 290
AF360FGZ ....................162, 289
AF540FGZ ....................162, 289
Alkaline batteries ....................39
Aperture ..........................88, 302
Aperture Priority Mode c ......98
Aperture ring ...................94, 284
Auto Flash Discharge .............69
Auto Power Off .....................253
F (White Balance) .........182
Autofocus = .......................112
Autofocus Mode ...................144
c (Aperture Priority) Mode ...98
AV cable ...............................221
AV device .............................221
B
Filter) ....................................227
Batteries .........................39, 253
Beep .....................................243
Blue Sky d ...........................84
Bright areas ............29, 189, 302
Brightness Adjustment .........189
Brightness Level ...................250
Brightness of the monitor .....250
Built-in Flash ...........................67
11
308
11
Bulb Shooting ...................... 103
C
Calendar display .................. 206
Camera shake ............. 128, 302
Candlelight U ........................ 85
Capture Mode ........................ 83
Card access lamp .................. 17
Catch-in Focus ..................... 123
Center-weighted .................. 106
City names ........................... 246
Cloudy (White Balance) ....... 182
CMOS sensor ...................... 302
CMOS sensor cleaning ........ 285
Color (Digital Filter) .............. 227
Color of the monitor ............. 251
Color Space ................. 187, 303
Color Temperature ....... 184, 303
Continuous Autofocus .......... 120
............................ 112, 115
Continuous Shooting ........... 136
Contrast (Custom Image) .... 194
Contrast AF .......................... 145
............................................. 171
Control panel ................... 24, 33
Copyright Holder .................. 257
Correct exposure ................... 88
Cropping .............................. 225
Cross Processing ................. 196
f (White Balance) .......... 182
Custom Filter (Digital Filters)
..................................... 140, 228
Custom Image ..................... 194
....................................... 81, 280
D
Dark areas ............. 29, 190, 303
Date Adjustment .................... 56
Date change .........................244
Daylight (White Balance) ......182
Daylight-Sync Shooting ..........72
DCF ......................................303
Default Settings ....................276
Delete .............................75, 215
Delete All Images .................218
Delete Folder ........................216
Deleting a Single Image .........75
Depth of field ..................89, 303
Destination ...........................244
Digital Filter ..................140, 227
Digital Preview ..............124, 127
Diopter Adjust .........................50
Direct keys ................32, 78, 276
Display Color ........................248
Display Language ...........52, 247
Distortion ..............................192
DNG .............................178, 303
DPOF ...........................255, 303
D-Range .......................189, 304
Drive Mode .............................78
Dust Alert ..............................286
Dust Removal .......................285
Dynamic Range ......91, 189, 304
E
e-dial .................................19, 21
e-dial in Program ....................95
Error Message ......................293
EV .........................................304
EV Compensation ........107, 304
button .............................19, 107
EV Steps ..............................108
Exif ...............................257, 304
Exposure ................................88
Exposure Bracketing ....109, 304
Exposure metering timer ......106
Exposure mode ......................93
Exposure Warning ....98, 99, 101
External flash ....................... 162
Extract Color (Digital Filter)
..................................... 140, 227
Eyecup ................................... 50
F
Face Detection AF ............... 145
File Format ................... 178, 268
File number .......................... 252
Filter ............................. 140, 227
............................................. 194
..................................... 140, 228
Flash .............................. 67, 155
Flash (White Balance) ......... 182
............................................... 72
Flash Off a ............................ 84
button ................... 19, 21, 67, 75
Balance) ............................... 182
Focal Length ........................ 130
Focus Indicator .............. 62, 121
Focus Lock .......................... 119
Focus Mode ......................... 112
Focus mode lever .......... 19, 112
Focus point .................. 117, 302
Focusing .............................. 112
Focusing Area ...................... 117
Folder display ...................... 205
Folder Name ........................ 252
Food K .................................. 85
Format ................................. 242
) ........................ 19, 21
G
Green button ............ 19, 21, 179
Guide Display ................ 22, 248
309
Guide Indicator .......................30
H
HDR (Digital Filter) ...............228
HDR Capture ........................191
Help ......................................272
High Contrast (Digital Filter)
.....................................140, 227
High Dynamic Range ...........191
(Custom Image) ....................194
High-ISO NR ..........................92
Highlight Correction ..............189
Mode ....................................164
Histogram .......................28, 304
Hometown ............................244
Hue (Custom Image) ............194
I
Image Comparison ...............214
Image Tone ..........................194
Index .....................................207
button ...............19, 21, 25
Initial Settings .........................52
Initializing ..............................242
Input Focal Length ................130
Installing software .................268
Instant Review ................63, 249
ISO Sensitivity ................90, 304
J
JPEG ............................177, 305
JPEG Quality ..................46, 175
JPEG Recorded Pixels ...46, 174
K
Kelvin ............................184, 303
Kids R ....................................85
11
310
11
L
Landscape s ........................ 84
Language Setting ........... 52, 247
............................................. 192
LCD Color Tuning ................ 251
Lens ............................... 48, 282
Lens Correction ................... 192
Lens unlock button ........... 19, 49
....................................... 94, 284
Lithium batteries .................... 39
Live View ............................. 143
Lock Exposure ..................... 120
Locking the focus ................. 119
U button ............................. 146
M
a (Manual) Mode ................ 100
Macintosh ............................ 264
Macro q ................................. 84
Main switch ................ 19, 21, 51
Manual Flash Discharge ........ 70
Manual focus \ ................ 121
Manual Mode a .................. 100
Manual White Balance ......... 184
Mass Storage Class ............. 266
Matte Field ........................... 122
Memory ................................ 260
button ............ 19, 21, 35
Menu Operation ..................... 35
Meter Operating Time .......... 106
Metering method .................. 104
\ (Manual focus) .............. 121
Miniature (Digital Filter) ........ 227
Mirror Lock-up ...................... 133
Mirror Up .............................. 287
Mode dial ......................... 19, 83
Monitor ................................... 22
.............................................227
Movie ............................148, 150
Moving Object \ ...................84
MSC .....................................266
Multi-exposure ......................138
Multi-image display ...............204
Multiple Flash Shooting ........170
Multi-segment .......................105
Museum E ............................85
N
ND Filter ...............................305
Neutral Density Filter ............305
Night Scene A .......................85
Night Snap l .........................85
...............................................39
Noise Reduction .............92, 305
NTSC ............................222, 305
O
button ................19, 21, 118
Optical Preview ............124, 126
Optional Accessories ............289
P
e (Program) Mode .................94
PAL ...............................222, 305
Pastel (Digital Filter) .............227
PC/AV terminal .....................221
PEF ......................................178
Utility 4 ..................................268
Pet Y .....................................85
Phase Difference AF ............145
Photographer Information .....257
Picture mode ..........................84
Picture Transfer Protocol ......266
Pixel Mapping .......................259
Pixels ................................... 174
Playback ................................ 74
................................... 19, 21, 74
Playback Display Method .... 203
[ Q Playback] Menu .... 201, 278
..................................... 200, 278
Playback Time ....................... 41
Playing Back Movies ............ 152
Portrait = ............................... 84
Power ..................................... 51
Power lamp .................... 17, 254
Press fully .............................. 64
Press halfway ........................ 64
Preview ................................ 124
Product Registration ............ 273
Program Mode e .................. 94
Protect ................................. 219
Provided Software ............... 268
PTP ...................................... 266
P-TTL (Flash) ....................... 168
P-TTL Auto (Flash) .............. 163
Q
....................... 46, 149, 175, 305
Quick Zoom ......................... 203
R
RAW ............................ 177, 305
RAW Button Function .......... 180
RAW Development .............. 233
RAW File Format ................. 178
Recorded Pixels ..... 46, 174, 305
Red-eye reduction ......... 71, 168
Remaining image storage capacity .................................. 41
Remote Control .................... 134
Reset ................................... 280
311
Resize ..................................224
Retro (Digital Filter) ......140, 227
Rotate ...................................213
S
.............................................194
H (Scene) mode .................85
SD Memory Card ....................44
Select & Delete .....................215
Select Battery .......................253
Self-timer ..............................131
Sensitivity ...............................90
Sensitivity Priority Mode K ...96
Sensor Cleaning ...................287
Setting ..................................106
[ R Set-up] Menu ..........240, 279
Shade (White Balance) ........182
Shadow Correction ...............190
Shake Reduction ..........128, 149
.............................................194
Shooting Information ..............23
Shutter Priority Mode b ........97
...................................19, 21, 64
Shutter Speed ................88, 305
Slideshow .............................210
Slim (Digital Filter) ................228
Slow Shutter Speed NR .........92
Slow-speed Sync ..................156
Soft (Digital Filter) .........140, 228
Sound ...................................149
Spot Metering .......................106
sRGB ............................187, 306
Stage Lighting n ...................85
.....................................140, 228
Status display .......................248
Status screen .........................23
11
312
11
Strap ...................................... 38
Sunset K ............................. 85
Surf & Snow Q ..................... 85
............................................... 96
T
Text Size .............................. 248
Toning (Custom Image) ....... 194
..................................... 140, 227
Trailing Curtain Sync ... 158, 169
Tungsten Light (White Balance)
............................................. 182
TV ........................................ 221
b (Shutter Priority) Mode ..... 97
U
USB Connection .................. 265
USB Connection mode ........ 265
V
Video Output Format ........... 222
Viewfinder ........................ 30, 50
Vignetting ............................. 306
W
Water Color (Digital Filter) ... 227
White Balance .............. 182, 306
Windows .............................. 264
Wireless Flash Control ......... 168
Wireless Mode (Flash) ......... 165
World Time .......................... 244
Z
Zoom Display ....................... 202
Zoom Lens ............................. 66
WARRANTY POLICY
313
All PENTAX cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from date of purchase. Service will be rendered, and defective parts will be replaced without cost to you within that period, provided the equipment does not show evidence of impact, sand or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to operating instructions, or modification by an unauthorized repair shop. The manufacturer or its authorized representatives shall not be liable for any repair or alterations except those made with its written consent and shall not be liable for damages from delay or loss of use or from other indirect or consequential damages of any kind, whether caused by defective material or workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer or its representatives under all guarantees or warranties, whether expressed or implied, is strictly limited to the replacement of parts as hereinbefore provided. No refunds will be made on repairs by nonauthorized PENTAX service facilities.
Procedure During 12-month Warranty Period
Any PENTAX which proves defective during the 12-month warranty period should be returned to the dealer from whom you purchased the equipment or to the manufacturer. If there are no representatives of the manufacturer in your country, send the equipment to the manufacturer, with postage prepaid. In this case, it will take a considerable length of time before the equipment can be returned to you owing to the complicated customs procedures required. If the equipment is covered by warranty, repairs will be made and parts replaced free of charge, and the equipment will be returned to you upon completion of servicing. If the equipment is not covered by warranty, regular charges of the manufacturer or of its representatives will apply. Shipping charges are to be borne by the owner.
If your PENTAX was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer’s representatives in that country. Notwithstanding this, your PENTAX returned to the manufacturer will be serviced free of charge according to this procedure and warranty policy. In any case, however, shipping charges and customs clearance fees to be borne by the sender. To prove the date of your purchase when
11
314 required, please keep the receipt or bills covering the purchase of your equipment for at least a year. Before sending your equipment for servicing, please make sure that you are sending it to the manufacturer’s authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer. Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing.
• This warranty policy does not affect the customer’s statutory rights.
• The local warranty policies available from PENTAX distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact the PENTAX distributor in your country for more information and to receive a copy of the warranty policy.
11
The CE Mark is a Directive conformity mark of the European
Union.
315
For customers in USA
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
For customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
Pour les utilisateurs au Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
FOR CALIFORNIA, U.S.A. ONLY
Perchlorate Material-special handling may apply.
The lithium battery used in this camera contains perchlorate material, which may require special handling.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
11
Declaration of Conformity
According to 47CFR, Parts 2 and 15 for
Class B Personal Computers and Peripherals
We: PENTAX Imaging Company
A Division of PENTAX of America, Inc.
Located at: 600 12 Street, Suite 300
Golden, Colorado 80401 U.S.A.
Phone: 303-799-8000 FAX: 303-790-1131
Declare under sole responsibility that the product identified herein complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR §2.909. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15.101 to §15.109.
Product Name: PENTAX Digital Still Camera
Model Number:
a
Contact person: Customer Service Manager
Date and Place: September, 2009, Colorado
Information for Users on Collection and Disposal of Old
Equipment and Used Batteries
1. In the European Union
These symbols on the products, packaging and/or accompanying documents mean that used electrical and electronic equipments and batteries should not be mixed with general household waste.
Used electrical/electronic equipments and batteries must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products.
Following the implementation by member states, private households within the EU states may return their used electrical/electronic equipments and batteries to designated collection facilities free of charge*.
In some countries your local retailer may also take back your old product free of charge if you purchase a similar new one.
*Please contact your local authority for further details.
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.
2. In other countries outside the EU
These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.
For Switzerland: Used electrical/electronic equipment can be returned free of charge to the dealer, even when you don't purchase a new product. Further collection facilities are listed on the home page of www.swico.ch or www.sens.ch.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a designation for the chemical element or compound in use. In this case you have to comply with the requirement set by the Directive for the chemicals involved.
Memo
Memo
Memo
Memo
HOYA CORPORATION
PENTAX Imaging Systems Division
2-36-9, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.jp)
PENTAX Europe GmbH
(European Headquarters)
Julius-Vosseler-Strasse 104, 22527 Hamburg,
GERMANY
(HQ - http://www.pentaxeurope.com)
(Germany - http://www.pentax.de)
PENTAX U.K. Limited PENTAX House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.pentax.co.uk)
PENTAX France S.A.S.
112 Quai de Bezons, B.P. 204, 95106 Argenteuil Cedex,
FRANCE
(http://www.pentax.fr)
PENTAX Imaging Company
A Division of PENTAX of America, Inc.
(Headquarters)
600 12th Street, Suite 300 Golden, Colorado 80401,
U.S.A.
(PENTAX Service Department)
12061 Tejon St. STE 600 Westminster, Colorado 80234,
U.S.A. (http://www.pentaximaging.com)
PENTAX Canada Inc.
1770 Argentia Road Mississauga, Ontario L5N 3S7,
CANADA (http://www.pentax.ca)
PENTAX Trading
(SHANGHAI) Limited
23D, Jun Yao International Plaza, 789 Zhaojiabang Road,
Xu Hui District, Shanghai, 200032 CHINA
(http://www.pentax.com.cn) http://www.pentax.jp/english
• Specifications and external dimensions are subject to change without notice.
53546 Copyright © HOYA CORPORATION 2008
H01-200909 Printed in Philippines
SLR Digital Camera
Operating Manual
For optimum camera performance, please read the Operating
Manual before using the camera.
Ladda ner
Offentlig länk uppdaterad
Den offentliga länken till din chatt har uppdaterats. You may view and manage your chat links after registration here.
Offentlig länk till dokument
Annons