Setting the Green Button Function
179
You can assign one of the following functions to the | (Green) button and access the function by simply pressing the button while shooting.
Green Button
Custom Image
Optical Preview
Digital Preview
Digital Filter
RAW Button
Function
Center AF Point
Resets the values being adjusted. (default setting)
Sets the Custom Image settings. (p.194)
Displays the Optical Preview. (p.126)
Displays the Digital Preview. You can set whether or not to display the histogram and Bright/Dark Area warning during
Digital Preview. (p.127)
Displays the digital filter. (p.140)
Temporarily changes the file format. By default, simultaneously saves the image in both JPEG and RAW format, regardless of the [File Format] setting. You can select whether the setting applies to only one image and the
file format when the button is pressed. (p.180)
Returns AF point to the center of the AF frame if [Select AF
Point] is set to S (Select) and the AF point has been
changed. (p.118)
1
Select [Green Button] in the
[ A Rec. Mode 4] menu and press the four-way controller ( 5 ).
The [Green Button] screen appears.
1 2 3 4
Green Button
Memory
Shake Reduction
Input Focal Length 35mm
6
2
Press the four-way controller
( 5 ).
MENU Exit
Green Button
Green Button
Action in M Mode e-dial in Program
P LINE
P SHIFT
MENU
180
3
Use the four-way controller
( 23 ) to select a function to assign to the | button, and press the 4 button.
Green Button
RAW
Green Button
Custom Image
Optical Preview
Digital Preview
Digital Filter
RAW Button Function
Center AF Point
MENU Cancel OK OK
4
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
6
Setting the RAW Button Function
When [RAW Button Function] is assigned to the | button, specify the function settings.
1
Select [RAW Button Function] in Step 3 of “Setting the
Green Button Function”.
2
Use the four-way controller ( 23 ) to select [Cancel after 1 shot].
3
Use the four-way controller
( 45 ) to select O or P .
Green Button
RAW RAW Button Function
Cancel after 1 shot
JPEG
RAW
RAW+
RAW+
RAW+
RAW+
MENU
O
P
The recording format returns to the original file format after a picture is taken. (default setting)
The setting is canceled when the following operations are performed.
- The | button is pressed again
- The Q button or 3 button is pressed
- The main switch is turned off
- The mode dial is turned
4
Use the four-way controller ( 23 ) to choose a file format.
The left side is the [File Format] setting and the right side is the file format when the | button is pressed.
5
Press the four-way controller ( 5 ), and use the four-way controller
( 23 ) to select a file format when the | button is pressed.
Green Button
RAW RAW Button Function
Cancel after 1 shot
JPEG
RAW
RAW+
RAW+
RAW+
RAW+
MENU Cancel OK OK
6
Press the 4 button.
7
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
181
6
