Kodak Chevron Manual
Kodak Chevron is a rugged and dependable roll-film camera designed for photographers who value simplicity and performance. Equipped with Kodak's finest 78mm f/3.5 Ektar lens and accurate Synchro-Rapid 800 Shutter, it captures sharp and well-defined images. The Chevron's split-field rangefinder ensures precise focusing, while its depth-of-field scale provides guidance for achieving optimal focus. The camera supports Class F and M flash lamps and electronic flash, making it suitable for various lighting conditions.
PDF
Document
Advertisement
Advertisement
Instructions for using the . . |. . CHEVRON /
er PA MER A
EAT
KODAK CHEVRON CAMERA
* Rugged in design, simple to operate, de-
pendable in performance—here's a camera
ibats all caméra.
The Chevron has Kodak's finest lens—the
sharp-cutting 78mm #/3.5 Kodak Ektar Lens.
The Chevron has Kodak's finest shutter—
the accurate Synchro-Rapid 800 Shutter.
Г. М. МЕБ. Ш. 5. FAT. OFF.
In picture quality and definition, the
Chevron is not surpassed by any other roll-
film camera — regardless of price. It's no
wonder either, because this camera was
designed for our many good friends who
have asked that we make a camera with-
out frills but with work-horse ability — a
combination of features that easily and re-
liably produces outstanding picture quality.
Before an important picture assignment,
a trip, or any special event, shoot a roll of
film and make a few flash pictures. This will
provide e check on your equipment,
Know Your Camera
Loading 620 Film | ©)
Making Exposures
+
Flash |
1
|
Film for the Chevron Camera
Using the Kodak 828 Adapter | A
Tables |
Tips on Fast-Action Shots | MN
| |
Accessories
Facts and Details v
The Kodak Synchro-Rapid 800 Shutter
Shutter Speed—Turn the speed control ring
(3) until the speed index mark is directly over the
shutter speed dot. At the “В” setting, the shutter
will remain öpen as long as the shutter release
lever is held.
Aperture—Move lens opening lever (6) un-
til the pointer is opposite the desired /-number.
For easier reading, a second scale and indicator
are located on the top of the shutter.
Cocking— Push the shutter cocking lever (2)
toward flash post (4) to the end of the slot until it
catches. The shutter must be cocked for all speeds.
2
At 1/800 set the speed before cocking the shutter.
Shutter Release—An exposure is made when
the shutter release lever (1) is pressed.
Synchronization—Class F and Class M flash
lamps and electronic flash can be used with the
Synchro-Rapid 800 Shutter. The synchronizer
selector (5) varies the time delay between the
closing of the lamp circuit and the opening of the
shutter blades.
Cable Release—The cable release socket is
located on the rim of the shutter between the cock-
ing lever and shutter release lever.
Focusing
Oul-of-fôeyus
In-focus
Know Your Camera
DEPTH-OF-FIELD SCALE
DISTANCE SCALE +
Split-field Range Finder—Focus by turning the knurlea focusing
ring (16). The split-field range finder is coupled to this ring. Look through
the range finder eyepiece (9) and center the small pointer over the sub-
Ject; then focus on a vertical line. Turn the ring until the two halves of the
image are in line (see pictures). When the image is in line, the camera will
be in focus, The accuracy of the rangefinder is not affected by the align-
ment of the sides of the two fields.
The distance scale indicates the distance from the subject to the film
plane. The film plane indicator (14) locates the position of the film plane.
Depth of Field—When the camera is focused al a given distance,
objects in front of and beyond this distance will also be in focus. The
depth-of-field scale (see illustration at right) gives these distances.
Set the lens opening, then focus on the main subject. On each side of the
index mark find the f-number which corresponds to the lens opening. Read
near and far distances. Illustration shows camera focused at 10 feet. At
1/8, the depth of held is from about 8 to 1334 feel,
= Me
— =
Do Not Load In Bright, Direct Light
Push in and hold the film-advance release
lever (12) while turning the exposure count-
er dial (13) clockwise until the “N” is oppo-
site the index noint. The travel of the lever
is very slight. Heiease the lever.
2 The camera back is hinged at both ends. Ii
can be opened from either end or removed
entirely. To open one end, push in the spring
lock with the ball of the finger or thumb and
push down the slide. To remove the back,
repeat on the other end.
a
3 The take-up spool should be under the film
advance lever (7). If it isn't, place the take-
up spool against the spring-mounted center-
ing pin. Push the spool into position. Hold
the spool and move the lever until the key
engages the spool.
Loading 620 Film ©
4 Insert the roll of film in the opposite end of
the camera so that the colored side of the
paper wii! be up when the film is pulled to-
ward the take-up spool. Do not break the
paper seat until the fil spool is in position,
3
5 Break the seal. Thread the paper into the
longer slot of the take-up spool. Make ** >
or four full strokes with the film advance
lever to bind the paper. Be sure the paper is
started straight,
6 Replace the back and lock it in position by
pushing up on the slides. Make sure the
spring locks snap oui and lock the slides.
7 Uncover the red window in the back of the
camera by pushing up on the window cover
lever (11). Advance the film slowly when
you see the arrows and dots. Stop when the
figure “1” is just visible.
Loading 620 Film O
8 Release the window cover lever and turn the
\posure counter dial until it locks at 1.7
Az a reminder of the type of Kim in the
camera, rotate "he film indicator dial (10)
until the black spot under the name of the
film comes into the cutout, 7
"Note: De sure the dial is locked or the
film metering device will not work.
Getting Read
1. Load the camera
with film. 2. Make sure
that the slot of the find-
er frame control (15)
lines up with the dot at
FULL for 620 film—the
dot at 828 for 828 film.
3. Sel the shutter speed
and lens opening for
the correct exposure, 4.
Cock the shutter. 5. Fo-
cus the lens.
8
Taking the Picture
Framing the picture: Look through the view
finder eyepicee (8) which is directly above the
range finder eyepiece (9), Hold the camera so that
all four corners of the front-finder frame are visible.
Sec the diagram which shows how the rear-finder
frame should be superimposed on the front-finder
frame. The button, in the slot to the right of the
finders, controls an eyepiece mask. If you wear
glasses or are having difficulty superimposing the
finder frames, experiment with each mask to see
which is the better. Focusing the camera automati-
cally corrects finder parallax.
Ea
Rear Front
finder finder
frame frame
4«——Ti
Making the exposure: To minimize camera
movement, get a good grip on the camera. The illus-
trations show two ways the camera can be held.
Notice that the camera is cradled in the hands, leav-
ing the fingers free to manipulate the controls.
When making the exposure, squeeze the shutter
release lever (1).
Advancing the film: To do this, push in the
film-advance release lever (12) (don’t hold it):
then make several strokes with the film advance
lever (7) until it automatically locks. The film is
now ready for the next exposure.
O SE
Making Exposures
Removing the Yiln:
E”
1. After exposure number “12,” un-
cover the red window and wind until
the end of the paper is completely
wound on the take-up spool. 2. Open
the camera back. Remove the exposed
film by pressing downward on the bot-
tom spool flange. Do not remove film in
bright, direct light.
Caution: Do not allow the paper backing to
unrol! when removing the film. Scratches
may occur if the backing paper is wound
with a hwisting motion.
Available in 620 only
Kodak Verichrome
Film
General outdoor use;
night photography with
photoflash. Reproduces
flesh tones beautifully
under artificial light, Ef-
fective for close-ups of
men because Ortho ma-
terials tend to strengthen
character lines. This is
a top-quality film that
more advanced photogra-
phers should know.
10
Kodak Ektachrome
Film \
EA
A color film of exceptional brilliance and color
quality. Kodak Ektachrome Film can be readily
processed by the photographer. Thus it's possible
to view results soon after exposure. Its soft gra-
dation provides lifelike realism. Roll-film trans
parencies can be projected, viewed by transmitted
light, or used for color enlargements made by the
Kodak Dye Transfer Process. Kodachrome Prints
and Enlargements can also be made from these
transparencies. Available in both Daylight Type
and Type B (balanced for use with flash and
3200° K lamps).
Available in 620 and 828
Kodak Plus-X
Film
Speed and fine grain provide
good negatives under adverse
light conditions. Low graini-
ness and high resolving power
allow big enlargements without
grain. Its “Pan” sensitivity
smooths out skin texture and
contours, for good close-ups of
women, Extra speed and color
sensitivity make it ideal for
most outdoor shots, too.
Kodak
Super-XX Film
Combines high speed
with complete color
sensitivity. Fine for
fast-action shots, in-
doors or out. Gives
fully exposed nega-
tives under difficult
light conditions. Also
useful for portraiture
and illustrative work.
Kodacolor Film
The negative-positive Kodacolor
Process produces handsome color
prints on paper. The negatives are
color negatives and should not he
confused with positive color trans-
parencies. Kodacolor negatives make
beautiful color enlargements.
The purchase price of Kodacolor
Film includes processing to color
negatives, You pay extra only for
prints. See your Kodak dealer for full
details.
Film For Chevron Camera
Available in 828 only
Codes" ramo Film
Here is the favorite color film. A “reversal”
rather than a negative-positive process, the film
is processed at no extra cost by Kodak and is
returned in Kodaslide Mounts, ready for pro-
jecting on a screen. Wonderful Kodachrome
and Kodacolor Prints and Enlargements can
be made from this color film. Your own color
prints can be made by the Kodak Dye Transfer
Process. Available in both Daylight Type and
Type A (for use with flash and flood).
11
Flash
=. | >
Kodak Flasholders
The Kodak Ektalux Flasholder is recommended
for the Chevron Camera. The Kodak E-C Flash-
older or the Kodak Standard Flasholder can
also be used for flash pictures. The Ektalux and
B-C Flasholders have a built-in B-C (battery-
condenser) circuit and use a 2216-volt battery.
The Standard Flasholder uses two size C bat-
teries. These should test at 5 amperes each.
Extension units are available for these flash-
olders. Pictured is the Kodak Ektalux combi-
nation.
13
o ls ns pe SE
5
ama 7
Flash Lamps
Both Class F and Class M lamps can be used
with the Chevron Camera—see chart.
Synchronizer Selector
The synchronizer selector (5) varies the time
delay between the closing of the lamp circuit
and the opening of the shutter blades.
Set the selector to A for electronic flash and
for Class F lamps with B-C as the power sup-
ply. If only batteries are used with Class F
lamps, move the selector to F.
Since there are differences between power
supplies, lamp types, and circuits, best synchro.
nization for a particular combination may re-
quire a somewhat different delay than is shown
on page 15. Therefore, the selector settings for
shutter speeds with Class M lamps should be
used as a guide only.
14
Improved exposure with your particular
combination may result if you move the selec.
tor 1 or 2 dots to either side of the recom-
1/200 second duration of flash
1/50 second duration of flash
CLASS
Flash
Guide numbers for various lamps when used
in the Ektalux, B-C, and Standard Flasholders
are on pages 24 and 25,
mended setting. Then, the dots on the scale can
serve as new reference points as indicated by
your tests,
Electronic Flash ФЗ No time delay—Use this selling for elactronic Cash and for Class F lamps with B-C al shuller speeds
of 1/200 or less
Standard
| Ati | Class F Lamps Л abs} Use this selling with Class F lamps and balleries at shuller speeds of 1/400 or less
7 accept | ®
only |
these | №
| 8 —— Average exposure ab 1/25 or less
SM Bayonet ki
SF Bayonet
5 Bayonet
25 Bayonet
— 2 Medium
Screw |
22 Medium
| Screw |
| He
Eklalux
Flasholder
accepts
all
Class M Lamps . pe Average exposure al 1/30
— Average exposure al 1/100
Average exposure at 1/200, 1/400
Average exposure at 1/800
15
— — an
Zo 2 iilr6eae< saaiiiims—.acce
Flasholder Hookup
Remove the flash-post cap from the flash post (4). To do
this, push ths cap .n and twist it tothe left. Connect the
flashelder cord to the fash post. Attach the flasholder
bracket to the tripod socket in the bottom of the camera.
Caution: Since lamps may shatter when flashed, the use of
a protective covering over the reflector is recommended.
With the Ektalux Flasholder, use the Kodak Ektalux Flash-
guard, With the Standard or B-C Flasholders, use the
Kodak 2-Way Flashguard.
Do not flash the lamps in an explosive atmosphere.
Do not insert flash lamps in the reflector ¡f the shutter is
open—the lamp will flash and a serious burn may result.
lé
Using Electronic Flash
Electronic flash, with no lag in the trip
circuit, can be used with this shutter.
Set the synchronizer selector to X.
Connect the cord from the speedlamp
to the flash post. Cock and release the
shutter in the regular way. The normal
action of the shutter blades actuates
and synchronizes the flash discharge
of the units. Follow the flash unit in-
structions for exposure data.
Units which use heavy-duty relays
or solenoids should not be used.
ie aia
a ail
Flash Outdoors
Flash can also be used outdoors in
reduce excessive contrast and ini-
prove shadow detail in pictures of
nearby subjects in bight sunlight.
Use flash at the camera, and set the
shutter and lens opening at the usu-
al settings for front lighting wheth-
er lighting is front, back, or side.
For close-ups, use one or more
thicknesses of white handkerchief
over the reflector to reduce exces. |
sive fill-in.
Flash
Lamp-te-subject distance for supplementary Flash
Color Filr 5
15. 58, 25B, 228, or 2B liiap at ‘0 18 feel
Black-and- Ho. 5 or 25 lamp at 10 to 30 feet
White Films | SM or 5F lamp at 516 15 feet
Mote: Ranges rather than specific distances are given
because the best amount of fill-in light is largely a
matter of personal preference. With the smaller lamps,
the shorter distances will usually be preferred: with
the larger lamps, the longer distances.
17
Advantages of the Adapter
The Kodak £28 Adapter enables you to use B-exposure
Koh dE ini in the Ci ron Camera. The kit, which
contains à film mask, two 828 spool holders, and an 828
hilin sucol, is an accessory that can be purchased from your
dealer,
À telephoto effect is achieved when 828 film is used in
the Chevron. This is because the Ektar Lens is about one
and one half times the normal focal length of lenses used on
628 cameras, The telephoto effect enables you to get “close-
ups” at greater distances from the subject. Also, for por-
trait work, the perspective is more pleasing. Here's how to
use the Adapter:
18
] Remove the camera back and 620 film
spool (save this spool for future use).
Install the 828 spool holders. The one
marked TAKE-UP is placed in the side
under the film advance lever. Place the
empty take-up spool in this holder, lt
may be easier to do this before the holder
is installed y ti camera, Make sure the
winding Ley engages the spool holder.
The holder "al SUPPLY 15 placed in
the opposite end of the ‘camera.’ The
white arrows on the holders must point to-
ward the lens.
Note: The bottom pin of the take-up holder and
the top pin of the supply holder are spring
loaded. When loading or unloading spools, push
in the direction of the spring-loaded pins.
A Install the film mask. The end stamped
TAKE-UP must be placed next to the take.
up spool holder.
Using the Kodak 828 Adapte
3 Move the counter dial (13) until the “N” is
opposite the index point.
20
Do Not Load or Unload In Bright, Direct Light :
Load the film spool into the holder marked
SUPPLY so that the colored side of the
paper is up. Break the seal. Thread the paper
into the longer slot of the take-up spool.
Make three or four full strokes with the film
advance lever (7) to bind the paper.
5 Be sure the paper is started straight. Replace
the back and lock it in position.
Uncover the red window and wind care-
fully when you see the arrow. Advance until
the boxed “1” is in the middle of the window.
Pop TE CEES rE CE EE
6 With some color films the name of the film
precedes each boxed number through the
entire roll. For example: K—COLOR,
K-CHROME. Move the finder frame con-
trol (15) to the 828 dot with a coin: this
brings the 828 mask into position,
aL A A
mr Sr ще, J
Note: The metering device on the
Chevron Camera works only with
620 film. After each exposure with
828 film, uncover the red window
and advance the film to the next
boxed number.
Using the Kodak 828 Adapter
7 After the cighth exposure, open the window
and wind until the paper is completely
wound on the take-up spool.
Open the back and pull out the take-up
spool holder. Remove the exposed roll of
film from the holder.
TRE
Note: Hake sure the 828 film mask
is removed when using 620 film.
21
EE
a Ta
= ui E
Camera Focusing
Distance from Subject
to Front of
Approxi=
mate Field
size
Table of field sizes with Kodak Portra Lenses
Senle Settl
(in feet
Insert Hin
(in inches
Based on
* x 24
(in Inches)
Based on
Kodaslide 52H
Mount
Hi Er
Kodak Portra Lens 14
Kodak Portra Lens 24
Kodak Portra Lens 34
| i
on 15 314 en 15 ala | do 15 314
зом 324 1914 1944 173 1274 13 1244 vi
2804 x 284 | 2314 x 2346 | 1314 x 1344 14 x 14 1274 x= 1234 yx DAE x DUG B74 x B14 Gf = Gif
| | т;
13 x 1874 1034 = 16% lg x 9 Gg x 014 51% x BM 414 x 6 | Ag x6k 41% x 6 3x 414
Lise these tnhles rather than those supplicd with the Porites Lenses,
PE
22
Depth of field with 828 film
Tables
“щи
Data | |
focused upon | Inf. | 50 | 25 | 15 | 12 | 10 & 7 Ú 5 4.5 4 3.0
from] © | 00 132 |177 (14147|107 9787 6%) TAM") Daly7|s” 24/47 TAQÍA7 1ME(S” те
msi 112" | 45 Вл IA [ar 37 Te er erige] ias lanos (as aleianojee|a 5”
from] (102 [33° |174 "113164117 a" T| TS") 64 [5° 216714 87 AT ТЫ”
Ifa dis ge | 83 [20 [137 Nose or ee] 7 sel Gee | Smagelw osgrlir ас 3055 3 5°
gg from | = | = as‘ hoe lali” 67) EOS) 7er | 65% [5 A nee 2 2 7
to | 70° | 30 (18441216 104/| 810” 7 377 6157 | 57% | slate alates [3 dize
gg Jom @ | e 507 lar lssgha gel orale | 68% (5057 (ardor (ar 37 [ar au”
td 49° per AT (ELE) RN E SE y nar 55” 4 7 Jar Zr Jar Of 34"
ууу, Дон CE Les | (strains fear (a ou:
w las (21 {15 [104 9 В | eet 67 | 5939 [бб fuir [sree [3 sk"
me Irom| æ | æ | las laz [ist 89| нат | теб fer ls 37 Jet étérjarioue”
w | 25’ | 17° |3’ [on ang] 7 af 6 se) Бет] ©’ Jara” lama” [a clar 2”
от | © | = |= lao las |3) hi3 eli” [as (66 | 7% llo” :
me + tes | 15111 "he 7M'| 6 8°) 5107| 530 | 48” e |! 97 |8’ 5” Ё ir
from] @ | © (e (o | y leo haw lest (a qe В 5“ |5’ 47 |4” 5”
За gee ize 10° | 9° | 64 510"| 5" 2") 49" | 43” ly o" [ar 6m |3' PIE
Measure subject distances to film plane.
Note: The depth-of-field scale on the camera is for 620 film. The above table
should be used for 828 film.
23
Een E u um
Flash lamp exposure guide numbers for Kodak Films
Kodak FEktaluxy Flasholder
—опе lamp near camera
Kodak B-C or Standard Flash-
older with Lumaciad Reflector
—one lamp near camera
Lamp {| SM or SF} | Mo. 5 or 251 | No. 2 or 22 SM or SF | No. 5 or 25
Shutter Speed Bio | | mE | oo [Bel | | Deo 7) | Bio | |
pee | 1/50 |1/100|1/200|1/400| 1/25 |1/100|1/400|1/500| 1/25 |1/100|1/400|1/500) 1/50 [1/100/1/200|1/400) 1/25 |1/L00|1/400/1/800
Kodak Verichrome Film | 80 | 75 | 65 5 150 | 110 | 65 | 45 | 190 | 140 | 85 | 60 | 75 | 70 | 60 | 45 | 140 | 100 | 60 | 45
Kodak Plus-X Film E 80 | 75 | 55 | 170 130 75 = 210 | 160 | 95 | 65 gs lw 50 | 150 | 120 | 70 | 50
Kodak Super-X X Film | 156 120 100 80 230 | 180 | 100 | 75 200 230 | 130 | 95 | 120 Ria 100 | 75 220 170 | 100. o
Kaducolor Film Type A $ 60 | 55| 50 | 40 120 | 90 | 50 | as |150 | 100 | 65 | a5| 60 Es 50 | 40 | 110 Tas 50 | 35
Kodachrome Film Type A {| 55 | 50 | 4% | 35 Fo 35° 25°] 110*| 80°) 45% 32°] 55 ce 35 sos] во* 35 25*
Kodak Ektachrome Film Type B 4} — | — | — | — | 65*| 50*| 28° го’ 85° 65+) 359] 28") — |= | — | — 60* | 45° 28*| 20°
{Lampe in "Normal" position, For Flat”
*With Kodak Flash Filter Na, B1C,
24
position, use one stop larger.
Tables | €)
E" ha EE Te
Blue-coated flash lamp exposure guide numbers for Kodak Color Films,
Daylight Type (For use indoors without daylight)
Lamp
Shutter Speed
Kodacolor Film Daylight Type
Kodachrome Film Daylight Type
Kodak Ektachrome Film Daylight Type
Kodak Ektalux Flasholder Kodak B-C
—ane lamp near camera or Standard
Flasholder
No. 5B or 25B1 No. 2B or 22B No. 5B or 25B
TN 1/50 | IED | 1/200 ae | 1/100 | 1/200 | 1/400 | HE 1/50 | 17100 | 1/200
| == |
85 75 ño 50 110 #5 65 50 #0 70 GA 45
|
55 50 40 32 70 50 40 30 añ 45 40 30
|
= |
50 45 35 28 dill 45 35 26 45 40 345 Eh |
Tampa In “Normal” piosilbri, Far “Fla” position, HE DM Só larger,
25
It's easy to freeze” action with the Kodak Chevron Camera.
1. Know your camera. Practice with an empty cam-
era until you can go through the entire picture-
taking sequence automatically. This is important, for
often a-series of fast-action pictures of one subject is
necessary. Lo tell a complete story.
Le
2. Discover what your own time lag is, then learn to
trip the shutter an instant before the action occurs.
As no two photographers have the same reflex action,
there is a variable time lag between the moment you
decide to take the picture and the instant the shutter
blades open.
26
Just load it with Kodak Super-XX Film and use a shutter speed of 1/800 second,
3. Anticipate the action by having the lens focused
and the right field of view in the finder. It's a good
idea to compose the picture before the action occurs.
Try to select a good background and frame the pic-
ture so that there is enough space around the subject,
allowing yot: to properly mask it during enlargina,
For example, if you're covering a basketball gaine,
select a location where the view of the basket is good.
Focus the less on à point that will allow both the
players and the basket to be sharp. When the players
move under the basket, compose thé picture in the
finder and get ready to shoot.
4. Know your subject. Remember, you can’t take
good action shots if you are not familiar with the
sequence that the action will follow.
5. The speed af the action, the angle at which the pic-
ture is taken, and the distance of the subject from the
camera are big “actors in stopping motion. Action
across your ficin of view appears to be moving at a
much greater speed than action moving either away
from or toward ycu. Fastaction sports are best taken
at a 45” angle. The greater the camera-to-subject dis-
tance, the easier it is to stop action.
Fast-Action Tips
Kodak Chevron Field Case Tripod and Cable Release
Smart protection
with this leather
case. Inside cover
holds four Series
V filters.
Get rock-steady shooting with
a good tripod. For time expo.
sures, use the Kodak TBI
— Metal Cable Release No. 2 or
Metal Cable Release No. 5.
28
Kodak Combination Lens Attachments
Use any single Series V filter or Portra Lens held
by the camera insert ring (on lens) or a Series V
Lens Hood, With a Portra Lens and filter combi-
nation, nse a Series V Portra Lens at the camera,
a Series V to VI Step-Up Ring, and a Series VI
filter which is heid by a Series VI Retaining Ring
or Lens Huo. A Series VI Pola-Screen can also
be used with the Step-Up King. A lens hood is not
recommended with the Pola-Screen.
29
"в Е понаиннннннний Ш.
_ z—_—_—_— NN" Ш
Accessories
Kodak Ektalux Flasholder
Here's the perfect partner for your Chevron
—a complete flash system. Rugged in con-
struction, widely Hexible in application—it
brilliantly meets the test of all types of flash
picture taking. If your problem is multiple
illumination of a large group—the simple,
efficient Extension Units put the light where
you need it. B-C, the battery-condenser sys-
tem, employs a small 2216-volt battery, pro-
viding an abundance of power. See page 12.
30
Kodak Flurolite Enlarger
This modern enlarger
features cold-light il-
lumination and pre
cision focusing. Con-
verts easily to a copy-
ing camera.
zn E
F
ge
Kodak Publications
Add to your photographic enjoyment and
knowledge with skillfully written, up-to-date
Kodak publications. Whether in the field or
Accessories
|
r A a y | 1 =
№ GUE le |
4, Pie fa iad |
| = |
TR Faja Ld Liu PIT MELEE 1
in your darkroom, you'll find authoritative
information about all phases of photog-
raphy. See your Kodak dealer.
31
e A EE
==
-
=
le om—— ОДНЕ
= = Sam
a
Service
Like any fine instrument, the Chevron Camera should be periodically cleaned.
The Kodak Field Case, pictured in the accessory section, will do an excellent job
of protecting the camera from dust and dirt. Occasionally wipe the camera with
a clean, lintless cloth. Any dust inside the camera can be blown out with a rubber
syringe. The Kodak Synchro-Rapid Shutter is lubricated at the factory. Never
oil the shutter or any other part of the camera.
The Ektar Lens and the view finder and range finder windows should be
cleaned with care. If any of the surfaces need cleaning, first brush or blow away
any grit or dust. Then wipe the surface gently with Kodak Lens Cleaning Paper
or a clean, soft lintless cloth. If moisture is necessary, use Kodak Lens Cleaner,
Do not attempt to make any repairs or remove any parts from the shutter,
lens, or camera. If you find additional service is necessary, return the camera
to your Kodak dealer who will have repairs made locally, or send it to the
nearest Kodak branch.
32
Lumenizing
The tinted appearance
of the Ektar Lens is due
to Lumenizing . . . a spe-
cial hard coaling ap-
plied to all air-glass
surfaces of the lens.
This treatment in-
creases light transmis
sion and decreases in-
ternal reflections, thus
improvirg the bril-
liance of black-and-
white pictures and the
purity of color pictures,
ny
Details
Film
Negative Size — 24 x 214 inches;
with Kodak 828 Adapter for Kodak
Chevron Camera, 28 x 40 mm.
Film Size—Kodak 620; 12 exposures
Kodak 828; B exposures.
Lens
Kodak Ektar — TBmm //3.5, Lumen:
ized, d-clement, unit focusing,
Lens Openings — from f/3.5 to //32;
click stops.
Combination Lens Attachments —
Series Y Filters, Portra Lenses:
see accessories section.
Shutter
Kodak Synchro-Rapid 800 — cocking
type.
@35CHE
- — ——_ = с сша сн
Facts and Details about the Chevron
Speeds—l, 1/2, 1/5, 1/10, 1/25, 1/50,
1/100, 1/200, 1/400, 1/800 second
and E,
Release—hody type.
Flash — built-in synchronization for
Class F and M flash lamps and
electronic flash.
Focusing and Viewing
Range Finder — split-field type, cou-
pled with lens.
Focusing Range--316 feet to infinity.
View Finder — optical, eye-level en-
closed type with automatic paral-
lax correction; built-in 828 finder
mask.
Depth-of-Field Scale — top-reading
type, for G20 film,
Film Operation
Film Advance—lever type. With ex-
posure counter dial and automatic
film stop for 620 film.
Construction
Body—dic-cast aluminum.
Back—hinged for opening on either
side, ый
+ Covering—Dblack morocco grain Koda:
dur,
Trim—metal :s chrome finished.
Tripod Socket -- standard tripod
thread on bottom of camera.
Serial Number—for identification in
case of loss or theft—located under
the shutter. Keep a record of this
with your valuable papers.
PRINTED (NM THE UMITED STÁTIG Or AMERICA
= = — | rE Ease ge
PL me
|
RE FS ——
= Le
">
/
Download
Just a friendly reminder. You can view the document right here. But most importantly, our AI has already read it. It can explain complex things in simple terms, answer your questions in any language, and help you quickly navigate even the longest or most compilcated documents.
Advertisement