Bodyworx Sport 1750 Treadmill Manual

SPORT1750

CONTENT

CONTENT

--------------------------------------------------------------------------------------------------------------------------------

1

IMPORTANT SAFETY PRECAUTIONS

----------------------------------------------------------------------------------2-3

ASSEMBLY INSTRUCTIONS

--------------------------------------------------------------------------------------------------4-6

FOLDING & UNFOLDING INSTRUCTIONS

----------------------------------------------------------------------------7

GROUNDING METHODS

---------------------------------------------------------------------------------------------------------8

OPERATION GUIDE

-------------------------------------------------------------------------------------------------------------9-13

GETTING STARTED GUIDE

---------------------------------------------------------------------------------------------------14

SAFETY EXERCISES

--------------------------------------------------------------------------------------------------------------15

WARM-UP EXERCISES

-----------------------------------------------------------------------------------------------------------16

MAINTENANCE INSTRUCTIONS

-------------------------------------------------------------------------------------------17

BELT ADJUSTMENT

---------------------------------------------------------------------------------------------------------------18

EXPLODED DRAWING

-----------------------------------------------------------------------------------------------------------19

PARTS LIST

-------------------------------------------------------------------------------------------------------------------------20-21

ERROR CODE AND SIGNIFICANCE

---------------------------------------------------------------------------

22

1

IMPORTANT SAFETY PRECAUTIONS

WARNING:

Before starting any exercise program, consult with your physician or health professional ， especially the person who is above 35 years old people or has some health problems before. We take no responsibility for any troubles or hurts due to above reasons. Don't power on until you finish assembly the treadmill and covering the protected top of motor.

ATTENTIONS:

1. When using this treadmill, keep attaching the safety pull pin rope to your clothes or belt.

2. Do not plug anything into any parts of this equipment, or it may damage.

3. Position the treadmill on a clear, level surface. Do not place the treadmill on thick carpet as it may interfere with proper ventilation. Also, do not place the treadmill near water or outdoors.

4. Never start the treadmill while you are standing on the walking belt. After turning the power on and adjusting the speed control, there may be a pause before the walking belt begins to move, always stand on the foot rails on the sides of the frame until the belt is moving.

5. Wear appropriate clothing when exercising on the treadmill. Do not wear long, loose fitting clothing that could become caught in the treadmill. Always wear running or aerobic shoes with rubber soles.

6. Keep small children or pet away from the treadmill during operation.

7. Do not do exercise in 40 minutes after meal.

8. The treadmill is only used for adults, child use the treadmill must have adult on side.

9. Always hold the handrails when initially walking or running on the treadmill, until you are familiar with the use of the treadmill.

10. The treadmill is for indoor equipment, do not use outdoor. Position the treadmill on a clean, level surface.

Note the treadmill made by special equipment, please do not remodel or do others.

11. The power cord of motorized treadmill is specialized. If the power cord is damaged, please purchase it from distributor or contact our company directly.

12. If the treadmill should suddenly increase in speed due to an electronics failure or the speed inadvertently increased, the treadmill will come to a sudden stop when the pull pin is disengaged from the console.

13. Do not connection in the middle of power cord, extending the power cord or replace the power cord plug.

Stacked weight object on the power cord or make the power cord near the high temperature heat, prohibit use the porous socket, otherwise it will cause fire or electric shock injury accident because of poor contact.

14. When the treadmill is not being used, the power cord should be unplugged and the safety pull pin removed.

Note the power cord of motorized treadmill made by special equipment, and if it is broken, please contact distributor quickly.

15. The treadmill is for home use only.

2

16. The treadmill maximum user weight is

120KG

.

17. Please do not overuse the treadmill so can avoid any injury and do not use incorrect way for your safety.

18. When the treadmill is not being used, please keep the safety pull pin in the safety place to avoid the other

use.

The main technical parameters

Input supply voltage

：

240V

Speed range: 0.8-16KM/H

Max. user weight: 120kg

Calories display range: 000-999

Heart rate range: 50-200 (time / min)

Product size: 1750*760*1410mm

Working temperature: 0-40

℃

Incline range:12 level Motor incline

Distance display range: 0.00-99.9km

Time display range: 00

：

00-99

：

59 (min : sec)

Running surface: 460*1350mm

Folding size: 1010*760*1540mm

Product Overview

Computer

Handrail

Safety key

Upright

End cap

Running belt

Motor cover

Side rail

Cushion

Base frame

Main frame

Side cover

3

WHEN YOU OPEN THE CARTON, YOU WILL FIND THE BELOW SPARE PARTS:

Main frame 1set D21 Inner washer M8

8 pcs

D13 Round hex bolt

M8*15 4pcs

C13 Safety Key 1set

D2 Allen wrench 6MM,

1 pc

D3 Allen wrench 5MM,

1 pc

D1 Screw driver 1 pc D16 Round hex bolt

M8*45 4pcs

B18 Silicon oil 1pc B49 Bottle holder 2 pcs D48 Cross self-tapping bolt ST4.2X19, 4 pcs

C19 MP3 line 1 pc

B11 Left Side cover

1 pc

B11 Right Side cover

1 pc

STEP 2:

According to the following steps to lift up the uprights.

4

STEP 3:

According to the picture, tighten the bottom frame with bolt M8*45(D16) and inner washer(D17).

Then locked the console frame with M8*15 (D13) and inner washer (D17).

D16

D13

D17

D13

D17

D16

D13

D17

Step 4:

Attach the left/right side covers (B11L)&(B11R) to the base frame with bolt ST4.2*19 (D48) as picture.

5

Step 5:

Put on the safety key (C13), MP3 Line (C19) and put on the bottle holder(B49) on the console.

B49

C13

Step 6:

To check if the running belt runs correctly, placing treadmill in folding position and tightening all the bolts. Then set speed under 3km/h and see if running belt runs without problem.

ATTENTION:

Must confirm complete assembly as the required above and lock all bolts. Do the following operations after checking everything is OK. Before you use the treadmill, please read the instructions carefully.

6

Lift up the machine and force to pull up until you heard "click" that made by safety casing stuck the pneumatic cylinder.

7

Kick the safety sleeve lightly and pull down the machine at the same time as the arrow direction.

Then the machine will fall down smoothly.

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER – Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product – if it will not fit the outlet, Please find a proper outlet installed by a qualified electrician.

This product is for use on a nominal 240V circuit and has a grounding plug. Make that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product.

8

1.1 WINDOW DISPLAY

1.2. START

Normal start after 5 seconds countdown

1.3 PROGRAM

1 manual mode

，

12 re-set programs, 1 body fat program,3 countdown function and 3 users.

1.4 SAFETY LOCK FUNCTION

The window shows"---" when take away the safety lock and the treadmill will stop quickly with "didi" alarm noise. And put the safety lock on, the computer will display for 2 seconds and the date count down to “0”

1.5 BUTTON FUNCTION

1.5.1 START/STOP

“START”--When the treadmill is not running, press this button to start, speed is “0.8”

“STOP”--When the treadmill is running, press this button to stop, then set program default and then return to manual mode after stopped.

9

1.5.2 “PROGRAM” BUTTON

When the treadmill is not running, press this button can circle choose from manual mode to pre-set mode P1-P12, body fat program, 3 countdown function, U1-U3.

1.5.3 “MODE” BUTTON

When the treadmill is not running, press this button to choose countdown modes:”H-1”,”H-2”,”H-3”,

“H-1” is the time countdown mode, and “H-2” is the distance countdown mode,“H-3” is the calorie countdown mode; press the “SPEED+/-” or “INCLINE+/-“button to adjust the data. After that, press the

“START” button to start this treadmill.

1.5.4“SPEED +/-“BUTTON

SPEED +/–, Adjust speed when treadmill start, the increment is 0.1km/time in kilometer. Press the button more than 2 seconds, and it will be up or down automatically.

1.5.5 SPEED QUICK BUTTON

Press the speed quick button 3km/h ， 6km/h ， 9km/h ， 12km/h to adjust the speed directly when the treadmill is running.

1.5.6 “INCLINE+/-” BUTTON

INCLINE +/ –, Adjust incline when treadmill start; the increment is 1 level/time. Press the button more than 2 seconds, and it will be up or down automatically

1.5.7 INCLINE QUICK BUTTON

Press the incline quick button 3

，

6

，

9

，

12 to adjust the incline directly when the treadmill is running

1.6 DISPLAY FUNCTION

1.6.1 SPEED

Display running speed

1.6.2 TIME

Display the running time or countdown time

1.6.3 DISTANCE

Display the running total distance or distance countdown.

1.6.4 CALORIE

Display the calorie or calorie countdown

1.6.5 INCLINE

Display the incline

1.6.6 PULSE

Display pulse data

10

1.6.7 ALL WINDOW DISPLAY DATA RANGE

TIME ： 0:00 – 99.59(MIN)

DISTANCE: 0.00 – 99.9(KM)

CALORIES: 0.0 – 999 (C)

SPEED:0.8-16.0(km/h)

PULSE: 50 – 200 (BPM)

INCLINE

：

0 – 15

1.7

PULSE FUNCTION

When the treadmill is running, hold the hand pulse about 5 seconds, it will display pulse data. The pulse data range is 50-200 times/ minute. It has heart-shaped graphics when testing pulse. This data is only for reference, can not be as medical data.

1.8

PROGRAM EXERCISE CHART

MODE

P1

P2

P3

P4

TIME

SPEED

INCLINE

SET TIME / 16= EVERY GRADE TIME

1

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

2 5 5 5 10 10 5 5 5 3 3 2 5 5 3 2

0

0 1 1 1 1 2 2 2 2 3 3 3 2 2 0

SPEED

SPEED

2 2 7 2 2 7 7 12 4 4 12 4 4 12 4 2

INCLINE

0 1 2 2 3 3 2 2 3 2 2 3 2 2 0

2 4 9 9 4 4 8 8 10 10 12 4 4 8 4 2

INCLINE

0 1 2 3 4 5 4 5 4 2 1 2 3 2 1 0

SPEED

2 6 6 6 12 12 12 12 6 6 3 3 3 5 5 2

INCLINE

0 1 2 3 4 5 6 7 6 6 5 4 3 2 1 0

SPEED

2 4 6 12 12 3 3 3 3 12 12 6 4 2

P5

P6

P7

P8

P9

P10

P11

P12

INCLINE

0 2 4 6 4 2 1 0 1 1 2 2 2 2 3 0

SPEED

2 4 5 5 6 6 8 8 6 6 8 8 6 9 6 2

INCLINE

0 1 3 4 4 3 3 1 2 1 2 1 2 1 2 0

SPEED

2 7 7 9 9 4 4 12 12 4 4 8 8 4 4 2

INCLINE

0 1 1 2 2 3 3 4 4 3 3 2 2 1 1 0

SPEED

2 2 6 6 6 8 9 10 11 12 9 5 5 5 3 2

INCLINE

0 1 2 4 2 1 2 4 2 1 2 4 2 1 2 0

SPEED

2 4 8 10 2 4 8 10 2 4 10 2 4 10 4 2

INCLINE

0 1 2 3 4 5 6 7 8 9 8 6 4 2 1 0

SPEED

2 5 6 7 8 9 10 11 10 9 8 6 7 5 4 2

INCLINE

0 1 2 4 6 6 6 4 4 4 2 2 2 1 1 0

SPEED

INCLINE

2 5 6 7 9 9 6 9 6 9 6 10 6 10 7 2

0

2 2 2 3 3 3 4 4 4 5 5 5 4 4 0

SPEED

2 6 8 10 8 6 4 6 8 12 8 6 8 12 2

INCLINE

2 6 8 10 8 6 4 6 8 12 8 6 8 12 2

INCLINE

0 1 1 3 3 5 5 7 7 5 5 3 3 1 1 0

11

1.9 Manual model operation

1.9.1 Press start key, time count down 5 seconds, then treadmill will start to work with initial speed1km/h

1.9.2 Press speed +/-, you can adjust the speed

1.9.3 Press incline+/-, you can adjust the incline

1.9.4 Press stop, you can stop treadmill at working state

1.9.5 Press quick speed key, you can quickly adjust the speed you want

1.9.6 Press quick incline key, you can quickly adjust the incline you want

1.10 3 COUNTDOWN FUNCTION PARAMETER DATA

Countdown time initial setting 30 ： 00 minutes ， setting range 5 ： 00---99 ： 00 minutes , each step 1 ： 00.

Countdown calorie initial setting 50therm, setting range 10---990 term ， each step 10.

Countdown distance initial setting 1.0km

， setting range 0.5---99.9 km

， each step 0.1

Cycle switch order is: manual, time, distance, calories.

1.11 BODY TESTER

（

FAT

）

At the beginning state, press “ PROGRAM” continually to enter “FAT“ body fat test ， window display

“FAT”. Press “MODE” to enter (F1 SEX, F2 AGE, F3 HEIGHT, F4 WEIGHT). Press “SPEED +”,

“SPEED -” to set. After setting, the computer will display F5 and grasp the hand pulse, the window will display your body quality index.

The body quality index is to test the relation between height and weight not the body scale.

The body FAT suits for any male and female to adjust the weight according together with other body quality index. The ideal FAT should be between 20-25, if under 19, it means too thin. If between 25 and 29, it means overweight, if over 30, it means obesity. (The data is just for reference and can not be as medicinal data)

01 Sex 01 Male 02 Female

05 FAT Under weight

FAT Obesity

12

1.12 User Program

Besides 12 pre-set programs, there have 3 user-defined programs: U1, U2 and U3 Each user program has 10 segments. The user can set the desired speed and incline .Press "PROGRAM" button to choose U1 ,U2 or

U3,press "MODE" button to enter setting condition, then set the time of the first segment. Press "SPEED+" and "SPEED-" to set speed. Press” INCLINE+” and “INCLINE-“ to set incline. Press "MODE" button and your choice will be set. The next workout segment will flash, go through the same setup as you completed with segment one. You must complete all 10 segments and then your user program is ready to use. Press

“STOP” key to return to last segment setting any time.

1.13 OTHERS

1.13.1

The system will enter into power saving mode automatically if there is no any action within 10 minutes under IDLE MODE and there is no display and backlit on the computer. Press any key to resume the system.

1.13.2

Countdown time, countdown calorie and countdown distance, you just can set one of them at one time, press last item to set running, the setting parameter is countdown, others display normal data

1.13.3

MP3 audio function: Insert the MP3 line in the input hole of the right side in the computer.

1.13.4

Bluetooth music function: Press the Bluetooth key till the display show Bluetooth icon, turn on the Bluetooth of your device to match with computer and play the music, user can increase or decrease the volume from the device, and also can turn back to last song or jump to next song.

1.13.5

On display – Distance covered, Calories burnt, Pulse reading, Body Fat test shown is only for indicative purpose and may vary from machine to machine. Do not compare these readings to a medical instrument.

13

PREPARE

I f you are around 35 years old, or have health problem, even this is your first time to do fitness exercise, please consult doctor or professional before use it.

Before do exercise, please stand on the side to learn how to operate, such as start, stop and speed adjustment. After that stand on the plastic deck of the treadmill board, catch hold of the handrail, start by 1.6--3.2 km/h low speed, stand straight, look forward, one foot try to do few times, then stand on the belt to do exercise. After adapting, you can adjust the speed to

3--5 km/h and keep doing about 10 minutes, then stop.

EXERCISE

Please stand on the side to learn how to operate, such as speed and incline, until you know it then can start do exercise.

Walk 1 km by constant step need about 15-25 minutes, please record it in fact. And walk 1km by 4.8 km/h need about 12 minutes. If you can do it easily by few times, then can adjust the high speed and incline, and go on to do 30 minutes, you can take a good exercise. Before do slow walk exercise ， please remember it is for your health and can not irritable.

AMOUNT OF EXERCISE

SHORTCUT

——

The best way to save time is do 15-20 minutes exercise.

Warm up 2 minutes by 4.8 km/h, and adjust the speed to 5.3 km/h and 5.8 km/h, continue do exercise by this two speeds.

Then add 0.3 km/h per 2mins speed increase, until you feel breathing quickened but not breathe hard. Keep this speed to do exercise, if feels uncomfortable, please reduce 0.3 km/h. Leave 4 minutes to reduce speed at last. If you fell it is hard to strengthen exercises by increase speed, then you can choose the way of increase incline slowly, it also can strengthen exercise.

EXERCISE FREQUENCY

Target is 3--5 times per week, do 15-60mins each time. It is better to make a time schedule, do not accord to your favor.

You can get the strenuous exercise degree through adjusting speed and incline. We'd suggest that do not set incline when start do exercise.

14

Please consult professional staff before do exercise. He can help recommendation exercise rate/intension and time according to your age and health condition. When running, if you feel chest tightness or chest pain, irregular Heartbeats, short of breath, dizziness or other unwell, please stop immediately! And consult professional before you want continually to do exercise.

If you often use treadmill, you can choose normal walk speed or jog speed.

If you have no experience or can't make sure the best testing speed, you can reference below standard:

Speed 1-3.0 km

Speed 3.0-4.5 km

weak constitution people. sedentary or not often exercise people.

Speed 4.5-6.0 km

Speed 6.0-7.5 km

Speed 7.5-9.0 km

Speed 9.0-12.0 km

More than 12.0 km walking quickly people. fast walk people. jogger. intermediate speed runner. excellent runner.

ATTENTION

：

It is suitable for walker to choose less than or equal to 6 km speed.

15

It is better to do some warm-up exercise. Warm the muscle easy stretch, so use 5-10 mins to warm-up. Then stop and according below method to do stretch exercise for five times, and each foot do 10 seconds or more every time. After running, do those stretch exercises again.

1. Reach Down

：

Knees slightly bent and body slowly bent forward, back and shoulders relax, trying to touch toes. Keep 10-15 seconds and relax. Repeat 3 times(See picture l).

2. Hamstrings Stretches:

Sitting on a clean cushion, put one leg straight, the other inward and close to the inside of the straight leg.

Try to touch your toes with your hands. Keeping for 10 to 15 seconds, and relax. Repeat 3 times for each leg(See picture 2).

3. Crus and Feet Tendon Stretches:

Standing with two hands on the wall or tree, one leg behind. Keeping your legs straight and the heel on the ground, tilt to the wall or tree. Keep 10 to 15 seconds, and relax. Repeat 3 times for each leg (See picture 3).

4. Quadriceps Stretches:

Keeping your balance with your left hand holding on the wall or table, then stretch your right heel toward your buttocks slowly, until you feel very tense in the front of your thigh.

Keep10 to 15 seconds, and relax. Repeat 3 times for each leg (See picture 4).

5. Sartorius (Inner Muscles of the Thigh Muscle Stretches:

Sitting down with your soles opposite and knees outward Pull your feet toward your groin Keep 10 to 15 seconds

， and relax. Repeat 3 times (See picture 5).

16

WARNING

： Please make sure pull out the treadmill's power plug before cleaning or maintaining the product.

CLEANSING

： General cleaning or the unit will greatly prolong the treadmill's life.

Keep treadmill clean by dusting regularly. Be sure to clean the exposed part of the deck on either side of the walking belt and also the side rails. This reduces the buildup of foreign material underneath the walking belt. Make sure the shoes are clean. The top of the belt may be cleaned with a wet soapy cloth. Be careful to keep liquid away from inside the motorized treadmill frame or from underneath the belt.

WARNING

： Always unplug the treadmill from the electrical outlet before removing the motor cover.

At least once a year remove the motor cover and vacuum under the motor cover.

This treadmill's walking belt and deck are equipped with a pre-lubricated, low maintenance deck system. The belt/ deck friction may play a major role in the function and life of your treadmill, thus requiring periodic lubrication. We recommend a periodic inspection of the deck.

We recommend lubrication of the deck according to the following timetable:

Light user (less than 3 hours/ week)

Medium user (3-5 hours/ week)

Every 60 days

Every 45 days

Heavy user (more than 5 hours/ week) Every 30 days

We suggest you buy lubricating oil from local distributors or contact our company directly.

Pay attention, any other maintains please ask professionals for help.

17

Place treadmill on a level surface. Make treadmill run at approximately 6-8 km/h, observe the running belt deviate condition.

I f the belt has drifted to the right, unplug the safety lock and power switch, and turn the right adjusting bolt 1/4 turn clockwise, then insert the power switch and safety lock, make the treadmill running, observe the running belt deviate condition. Repeat above steps until the running belt be placed in the middle.

See picture A

Once the treadmill belt swerving to the left, unplug the safety lock, turn off the power, then with the left adjusting bolt clockwise rotation 1 / 4 laps, and turn on the safety lock and power to make treadmill running, checking the deviation of the treadmill belt. Repeat the above steps until the belt centered.

See picture B

The treadmill belt will gradually relax after above steps or after a period of time using, unplug the safety lock, and turn off the power, with the two adjusting bolt clockwise rotation 1 / 4 laps, and turn on the safety lock and power to make treadmill running, then standing on the belt to confirm the tightness. Repeat the above steps until the belt moderate tightness.

See picture C

18

19

Parts list

No.

A1

A2

A3L

A3R

A4

No.

B1

B1-1

B1-2

B1-3

B1-5

B2

B3

B4

B6

B7

B8

B9

B10

B11L

B11R

No.

C1

C2

C3

C4

C5

Description

Base frame

Left upright

Right upright

Description

Console set

Overlay

Membrane Key

Console panel

I-Pad holder

Console cover

Protecting foam

Handrail plug

Transport wheel cap

Transport wheel

Flat foot pad

U-shaped foot pad

Left side cover

Right side cover

Description

A. Welding parts

Qty

1

1

1

1

1

No.

A5

A11

A13

B. Plastic parts

2

2

1

2

2

1

1

Qty

1

1

1

2

1

2

2

1

No.

B13

B14

B15

B16L

B16R

B17

B18

B19

B20

B21

B27

B31

B32

B34

B49

C. Electric and drive parts

Qty No.

Description

Incline frame

Motor bracket belt adjustment part

Description

Motor upper cover

Motor back cover

Side rail

Left end cap

Right end cap

Adjust wheel

Silicon oil

Power line deduction

Inner plug

New cushion

Rubber pad

Cushion

EVA pad(I-Pad holder)

Bottle holder

Description

Running belt

Rear roller

Front roller

Running board

1

1

1

1

C14

C15

C16

C17

Single cord (red) 300

Power line

Console upper wire

Console lower wire

20

1

1

1

Qty

1

1

1

1

2

1

4

1

1

Qty

1

1

2

4

1

6

2

2

Qty

1

2

1

1

C6

C7

C8

C9

C10

C11

C12

D7

D10

D11

D13

No.

D1

D2

D3

D14

D15

D16

D17

D18

D20

D21

D23

D24

Cylinder

Motor belt

Controller

Handle pulse left keyboard

Handle pulse right keyboard

Incline motor

1

1

1

1

1

1

C20

C21

C22

C27

C28

C35

D. Hardware parts

Qty

1

No.

D25

Description

Screw driver 13-15-17

Allen wrench T6

Allen wrench T5

Round hex bolt M10*60







Nylon nut M10

Nylon nut M8

Flat washer M8

Spring washer M5

8

8

8

13

1

7

8

1

4

1

4

1

1

3

4

D45

D46

D47

D48

D52

D55

D57

D60

D29

D31

D34

D35

D36

D42

Magnetic ring

Inductor

Filter

Single cord (black) 300

Photoelectric Sensor

Single cord(CE)

Description

Spring washer M8

Hex round head bolt M6*45




Cross head bolt M6*25




Cross self-tapping bolt

ST4.2*16


ST4.2*19


ST4.2*16


ST4.2*45


ST4.2*25


2

1

2

2

Qty

4

1

4

13

4

27

2

4

6

9

2

2

1

1

1

1

1

1

21

Error code and significance

Error Code

E01

Fault Description Solutions

Failure communication between controller and

1. Check if computer is connected to controller with correct wires, check connector, check if wire is damaged, or unplug and computer re-connect

2. Change inverter and test

3. Change computer and test

E02

Motor connection problem

1. Check if motor wire is connected well.

2. Check if controller is working, If not, please change one.

1. Protection is activated when current is overloaded, or when motor cannot run properly. If it’s the second situation, examine the treadmill and re-start it.

Controller.

3. Check if electric voltage works in proper range.

E04

Incline self-learning fault

Showing E4 when incline motor runs for adjustment.

Adjustment is completed automatically, or it fails.

— —

Computer doesn’t detect safety key signal

1.

Check if safety key switch works, connecting wire works, or magnet inside works.

2.

Safety key is not placed correctly

3.

Safety key is damaged

No display on computer

No power

1. Check if power cable is connected to machine or change to another power outlet. If power switch is in position, test it by switch ON/OFF. If the power switch is burned out, replace one and make sure there’s power to machine

2. Check cable connection between computer and controller

3. Replace adaptor or computer

22

Model No: SPORT1750

To register your warranty, please go to www.gpisports.com.au

No results