1
How to Change Function Settings
The camera functions and their settings can be selected and changed by using the following ways.
Direct keys
Control panel
Menus
Press ABCD in standby mode.
Press
G
in standby mode.
(indicated with the v icon in this manual)
Press
F
.
Using the Direct Keys
A
Sensitivity
B
White Balance
C
Flash Mode
D
Drive Mode
p.51
p.68
p.53
p.59
Using the Control Panel
G
You can set frequently used shooting functions. Press G in standby mode.
Use ABCD to select an item.
Use
R
to change settings.
Press E to make detailed settings.
Press
F
to cancel the setting operation.
Press
E
to confirm the selected item and return to the control panel.
18
Using the Menus
F
Most functions are set from the menus. The functions that can be set on the control panel can also be set from the menus.
1
Use
Q
to change the menu category.
Use R to switch between menu tabs.
Use AB to select an item.
Digital Filter
HDR Capture
Menu tabs
2
Press F to exit the menu screen.
1
Press
D
to display the submenu.
Press D to display the pop-up menu.
1
2
Use AB to select an item.
Press F to cancel the pop-up menu.
Press
E
to confirm the selected item.
Press F to return to the previous screen.
19
1
t
Memo
• For the Custom Setting menus ( E 1-5), you can show the setting screen of the next item in order of the menus on the monitor by turning
R
while the submenu of the currently selected item is displayed.
• Press F to display the first tab of the proper menus for the camera settings at that time. To display the menu tab last selected first, set in [25 Save Menu Location] of the E 4 menu.
• Settings are returned to their default values with [Reset] of the D 3 menu. To reset all the settings in the Custom Setting menus to the defaults, use [Reset Custom Functions] of the
E
5 menu. (Some settings do not apply.)
20
