Camera Settings
Customizing the Button/E-dial
Functions
A
4
6
Setting the E-dial Operation
For each exposure mode, you can set the functions for when
Q and R are turned and M is pressed.
1
Select [E-Dial Programming] in
A
4 menu and press
D
.
The [E-Dial Programming] screen appears.
2
Select an exposure mode and press
D
.
The screen for the selected exposure mode appears.
3
Press
D
and use
AB
to select the combination of functions for when
Q
and
R
are turned and
M
is pressed.
I
J
ISO e
X G
Change Shutter Speed
Change Aperture Value
Change Sensitivity
EV Compensation
Return to
G
Mode
100
G SHIFT
Program Shift
G
LINE
Program Line
--
Not available
4
Press
E
.
5
Press
F
.
The [E-Dial Programming] screen reappears.
Repeat Steps 2 to 5.
6
Press
F
twice.
t
Memo
• If you select [Rotation Direction] in Step 2, you can reverse the effect obtained by turning Q or R .
Setting the Button Operation
Set the functions for P , f , and the self-portrait shutter button.
1
Select [Button Customization] in
A
4 menu and press
D
.
The [Button Customization] screen appears.
2
Select the desired item and press
D
.
The screen to set the function for the selected item is displayed.
3
Press
D
and use
AB
to select the functions to assign.
The following functions can be assigned to each button.
Page
RAW/Fx
Button
Optical
Preview
Digital
Preview
Shake
Reduction
AF Active
Area
Setting
One Push File
Format
Bracketing
Function
Temporarily changes the file format.
Sets Bracketing shooting.
Activates the
Optical Preview to check the depth of field with the viewfinder.
Activates the Digital
Preview to check the composition, exposure and focus on the monitor.
(The maximum display time: 60 seconds)
You can magnify or save the preview image.
Turns the Shake
Reduction and
Movie SR functions on/off.
Enables changing the AF point.
p.102
p.62
p.48
–
p.56
AF/AE-L
Button
AF/AE-L
Button
(Movie)
Setting
Enable AF1
Enable AF2
Cancel AF
AE Lock
Function
Autofocus is performed when f is pressed.
Autofocus is performed when f is pressed and not when
0 is pressed halfway.
While f is pressed, the autofocus mode is set to w . Half press of 0 is disabled.
Locks the exposure setting.
Selfportrait
Shutter
Button
ON
Functions as the shutter release button when the LCD screen is pointed toward the subject.
OFF
4
Press
E
.
5
Press
F
.
The screen of Step 2 reappears.
Repeat Steps 2 to 5.
Always functions as the button to turn on/off Wi-Fi.
6
Press
F
twice.
Page
p.54
p.49
p.41
p.90
6
101
6
Setting the One Push File Format
Select the file format to change to when P is pressed for each [File Format] setting.
1
Set [RAW/Fx Button] to [One Push File Format] in
Step 3 of “Setting the Button Operation” (p.100).
2
Select
Z
or
Y
for [Cancel after 1 shot].
Z
Y
The recording format returns to the original file format after a picture is taken.
The setting is retained until any of the following operations is performed:
• When
P
is pressed again
• When 3 or F is pressed, or when the mode dial or main switch is turned
3
Select the file format when
P
is pressed.
The left side is the [File Format] setting and the right side is the changed file format when P is pressed.
Selecting the Display Settings for Digital Preview
Select the camera operation and type of information displayed on the monitor when Digital Preview is displayed by pressing
P .
1
Set [RAW/Fx Button] to [Digital Preview] in Step 3
of “Setting the Button Operation” (p.100).
2
Press
B
and select
Y
or
Z
for each display item.
102
Saving Frequently Used Settings
A
4
Camera settings can be saved to O and P of the mode dial and used repeatedly.
The following settings can be saved.
Exposure Mode (
I
/
J
/
AF point
K
Sensitivity
EV Compensation
Flash Mode
/
L
/
M
G
)
/
H
/ Drive Mode
White Balance
A
1-4 menu settings
(with exceptions)
E
1-4 menu settings
Saving the Settings
1
Set the exposure mode and all of the settings to save.
2
Select [Save USER Mode] in
A
4 menu and press
D
.
The [Save USER Mode] screen appears.
3
Select [Save Settings] and press
D
.
The [Save Settings] screen appears.
4
Select [USER1] or [USER2] and press
D
.
5
Select [Save] and press
E
.
The screen of Step 3 reappears.
u
Caution
• [Save USER Mode] cannot be selected when the mode dial is set to R , S , or Y .
t
Memo
• The settings saved as the USER mode can be displayed on the monitor when you select [Check Saved Settings] in Step 3.
• To reset the settings to the default values, select [Reset
USER Mode] in Step 3.
Editing a Setting Name
You can change the name of the USER mode in which you saved settings.
1
Select [Rename USER Mode] in Step 3 of
“Saving the Settings” (p.103) and press
D
.
The [Rename USER Mode] screen appears.
2
Select [USER1] or [USER2] and press
D
.
The text-entry screen appears.
3
Change the text.
Up to 18 single-byte alphanumeric characters and symbols can be entered.
Text selection cursor
C D
..
,,
+
LM NO P Q R
U V WX
< > @
= $ %
‘‘ ““
{{ }}
-- _
:: ;;
!! ?? ** #
Finish
6
Text input cursor
103
6
Available operations
ABCD
Moves the text selection cursor.
R
J
E
Moves the text input cursor.
Switches between upper and lower case letters.
Enters a character selected with the text selection cursor at the position of the text input cursor.
L
Deletes a character at the position of the text input cursor.
4
After entering the text, move the text selection cursor to [Finish], and press
E
.
The [Rename USER Mode] screen reappears.
Using the Saved USER Mode
1
Set the mode dial to
O
or
P
.
The USER mode guide is displayed for about 3 seconds.
Use AB to check the saved settings.
FF
250
5.6
2
Change the settings as necessary.
The exposure mode can be
1
changed in [Exposure Mode] of the A 1 menu.
t
Memo
• The settings changed in Step 2 are not saved as the USER mode settings. When the camera is turned off, the camera returns to the originally saved settings. To change the original settings, save the USER mode settings again.
104
Displaying the Local Date and Time of the Specified City
D
1
The date and time set at the time of initial setting (“Initial
Settings” (p.36)) serve as the date and time of your present
location and are reflected in the shooting date and time for images.
Setting the destination to a location other than your present location enables you to display the local date and time on the monitor when traveling abroad and also save images timestamped with the local date and time.
1
Select [World Time] in
D
1 menu.
The [World Time] screen appears.
2
Select the time you wish to display in [Time Setting].
Select F (Hometown) or G
(Destination).
3
Select [
G
Destination] and press
The [
G
Destination] screen appears.
4
Use
CD
to select a city.
Use
R
to change the region.
D
.
5
Select [DST] (daylight saving time), and use
CD
to select
Y
or
Z
.
6
Press
E
.
The screen of Step 2 reappears.
7
Press
F
twice.
t
Memo
• Refer to “List of World Time Cities” (p.128) for cities that can
be selected as a hometown or destination.
• Select [ F Hometown] in Step 3 to change the city and DST settings for the hometown.
• G appears in the control panel when [Time Setting] is set to
G
.
Selecting Settings to Save in the
Camera
A
4
Most of the functions set on this camera are saved even if the camera is turned off. For the following function settings, you can select whether to save the settings ( Z ) or to return the settings to their default values ( Y ) when the camera is turned off.
Set in [Memory] of the A 4 menu.
Flash Mode
Drive Mode
White Balance
Custom Image
Sensitivity
EV Compensation
Flash Exposure Compensation
Digital Filter
HDR Capture
Clarity Enhancement
Shooting Info Display
Playback Info Display
t
Memo
• When [Reset] of the D 3 menu is performed, all Memory settings return to the default values.
6
105
