FUJIFILM X-E4 Camera Owner's Manual

FF200002
Owner’s Manual
BL00005102-201 EN
Introduction
Thank you for your purchase of this product. Be sure that
you have read this manual and understood its contents before using the camera. Keep the manual where it will be
read by all who use the product.
For the Latest Information
The latest versions of the manuals are available from:
http://fujifilm-dsc.com/en/manual/
The site can be accessed not only from your
computer but also from smartphones and
tablets. It also contains information on the
software license.
For information on firmware updates, visit:
https://fujifilm-x.com/support/download/firmware/cameras/
ii
P Chapter Index
Menu List
1 Before You Begin
iv
1
2 First Steps
27
3 Basic Photography and Playback
41
4 Movie Recording and Playback
47
5 Taking Photographs
55
6 The Shooting Menus
103
7 Playback and the Playback Menu
181
8 The Setup Menus
207
9 Shortcuts
243
10 Peripherals and Optional Accessories
259
11 Connections
281
12 Technical Notes
297
iii
Menu List
Camera menu options are listed below.
Menu List
Shooting Menus
Adjust settings when shooting photos or movies.
N See page 103 for details.
Photo Menus
N Items marked with both x and F icons are available in both the still
photography and movie shooting menus. Changes to these items in
either menu also apply to the item in the remaining menu.
H IMAGE QUALITY SETTING
IMAGE SIZE
IMAGE QUALITY
RAW RECORDING
FILM SIMULATION
1⁄3
MONOCHROMATIC COLOR
GRAIN EFFECT
COLOR CHROME EFFECT
COLOR CHROME FX BLUE
WHITE BALANCE
DYNAMIC RANGE
D RANGE PRIORITY
TONE CURVE
2⁄3
COLOR
SHARPNESS
HIGH ISO NR
CLARITY
LONG EXPOSURE NR
LENS MODULATION OPTIMIZER
COLOR SPACE
PIXEL MAPPING
3⁄3
SELECT CUSTOM SETTING
EDIT/SAVE CUSTOM SETTING
AUTO UPDATE CUSTOM SETTING
xF MOUNT ADAPTOR SETTING
iv
P G AF/MF SETTING
FOCUS AREA
104
FOCUS MODE
105
AF MODE
106
106
AF-C CUSTOM SETTINGS
1⁄3
STORE AF MODE BY ORIENTATION
108
108
AF POINT DISPLAY yz
108
NUMBER OF FOCUS POINTS
109
PRE-AF
109
xF AF ILLUMINATOR
113
FACE/EYE DETECTION SETTING
114
AF+MF
114
MF ASSIST
2⁄3
115
FOCUS CHECK
115
INTERLOCK SPOT AE & FOCUS AREA
115
xF INSTANT AF SETTING
116
xF DEPTH-OF-FIELD SCALE
116
RELEASE/FOCUS PRIORITY
116 3⁄3 xF AF RANGE LIMITER
117
xF TOUCH SCREEN MODE
117
118
118
122
123
P
125
125
125
126
130
130
130
131
131
132
134
135
135
136
136
136
137
137
138
Menu List
P
F FLASH SETTING
FLASH FUNCTION SETTING
RED EYE REMOVAL
TTL-LOCK MODE
LED LIGHT SETTING
COMMANDER SETTING
CH SETTING
149
149
150
150
151
151
B MOVIE SETTING
MOVIE MODE
FILE FORMAT
FULL HD HIGH SPEED REC
F IS MODE
AUDIO SETTING
MIC/REMOTE RELEASE
152
152
152
152
153
154
P
v
Menu List
P
A SHOOTING SETTING
SPORTS FINDER MODE
140
141
PRE-SHOT sJ
SELF-TIMER
141
SAVE SELF-TIMER SETTING
142
1⁄3 SELF-TIMER LAMP
142
INTERVAL TIMER SHOOTING
143
INTERVAL TIMER SHOOTING
144
EXPOSURE SMOOTHING
AE BKT SETTING
144
FILM SIMULATION BKT
145
FOCUS BKT SETTING
145
MULTIPLE EXPOSURE CTRL
145
PHOTOMETRY
145
2⁄3
SHUTTER TYPE
146
FLICKER REDUCTION
147
IS MODE
147
ISO
148
3⁄3 xF WIRELESS COMMUNICATION 148
Movie Menus
N Items marked with both x and F icons are available in both the still
photography and movie shooting menus. Changes to these items in
either menu also apply to the item in the remaining menu.
Menu List
P H IMAGE QUALITY SETTING
P
B MOVIE SETTING
MOVIE MODE
155
164
F FILM SIMULATION
FILE FORMAT
156
164
F MONOCHROMATIC COLOR
FULL HD HIGH SPEED REC
157
164
F WHITE BALANCE
FIX MOVIE CROP MAGNIFICATION C 158
165
F
DYNAMIC
RANGE
1⁄3
1⁄2
F-Log RECORDING
158
165
F TONE CURVE
4K MOVIE OUTPUT
159
165
F COLOR
FULL HD MOVIE OUTPUT
159
166
F SHARPNESS
HDMI OUTPUT INFO DISPLAY
160
166
F HIGH ISO NR
4K HDMI STANDBY QUALITY
160
V INTERFRAME NR
166
HDMI REC CONTROL
160 2⁄2 F PERIPHERAL LIGHT CORRECTION 167
F PHOTOMETRY
160
xF MOUNT ADAPTOR SETTING 167
F IS MODE
161
2⁄3
F ISO
161
ZEBRA SETTING
162
ZEBRA LEVEL
162
MOVIE OPTIMIZED CONTROL oL 162
TALLY LIGHT
163
3⁄3
xF WIRELESS COMMUNICATION 163
vi
Menu List
P P AUDIO SETTING
168
168
168
169
169
170
170
171
171
171
171
172
174
INTERNAL MIC LEVEL ADJUSTMENT
EXTERNAL MIC LEVEL ADJUSTMENT
MIC JACK SETTING
MIC LEVEL LIMITER
WIND FILTER
LOW CUT FILTER
HEADPHONES VOLUME
MIC/REMOTE RELEASE
Q TIME CODE SETTING
TIME CODE DISPLAY
START TIME SETTING
COUNT UP SETTING
DROP FRAME
HDMI TIME CODE OUTPUT
P
175
175
176
176
176
176
177
177
P
178
178
178
179
179
vii
Menu List
G AF/MF SETTING
F FOCUS AREA
F FOCUS MODE
F AF MODE
F AF-C CUSTOM SETTING
1⁄2
xF AF ILLUMINATOR
F FACE/EYE DETECTION SETTING
F MF ASSIST
F FOCUS CHECK
xF INSTANT AF SETTING
xF DEPTH-OF-FIELD SCALE
2⁄2 xF AF RANGE LIMITER
xF TOUCH SCREEN MODE
FOCUS CHECK LOCK
The Playback Menu
Adjust playback settings.
N See page 187 for details.
Menu List
C PLAY BACK MENU
RAW CONVERSION
ERASE
CROP
RESIZE
1⁄3
PROTECT
IMAGE ROTATE
RED EYE REMOVAL
VOICE MEMO SETTING
viii
P C PLAY BACK MENU
P
187
RATING
198
190
IMAGE TRANSFER ORDER
199
192
xF WIRELESS COMMUNICATION 200
193
SLIDE SHOW
200
2⁄3
194
PHOTOBOOK ASSIST
201
195
PC AUTO SAVE
202
196
PRINT ORDER (DPOF)
203
197
instax PRINTER PRINT
204
3⁄3 DISP ASPECT
205
Menu List
Setup Menus
Adjust basic camera settings.
N See page 207 for details.
D SOUND SETTING
AF BEEP VOL.
SELF-TIMER BEEP VOL.
OPERATION VOL.
SHUTTER VOLUME
SHUTTER SOUND
PLAYBACK VOLUME
P D SCREEN SETTING
P
VIEW MODE SETTING
215
208
EVF BRIGHTNESS
215
209
EVF COLOR
215
209
EVF COLOR ADJUSTMENT
216
210
1⁄3
LCD BRIGHTNESS
216
210
LCD COLOR
216
210
LCD COLOR ADJUSTMENT
216
211
IMAGE DISP.
217
211
AUTOROTATE DISPLAYS
217
212
PREVIEW EXP./WB IN MANUAL MODE 218
212
NATURAL LIVE VIEW
218
P
F-Log VIEW ASSIST
219
213 2⁄3
FRAMING GUIDELINE
219
213
AUTOROTATE PB
220
214
FOCUS SCALE UNITS
220
214
APERTURE UNIT FOR CINEMA LENS 220
214
DISP. CUSTOM SETTING
220
214
LARGE INDICATORS MODE(EVF)
221
LARGE INDICATORS MODE(LCD)
221
3⁄3 LARGE INDICATORS DISP. SETTING 222
INFORMATION CONTRAST ADJ.
222
x Q MENU BACKGROUND
223
223
F Q MENU BACKGROUND
ix
Menu List
D USER SETTING
FORMAT
DATE/TIME
TIME DIFFERENCE
Qa
1⁄2
x MY MENU SETTING
F MY MENU SETTING
SENSOR CLEANING
SOUND & FLASH
RESET
2⁄2
REGULATORY
Menu List
P D SAVE DATA SETTING
Menu List
D BUTTON/DIAL SETTING
FOCUS LEVER SETTING
x EDIT/SAVE QUICK MENU
F EDIT/SAVE QUICK MENU
FUNCTION (Fn) SETTING
1⁄2
COMMAND DIAL SETTING
SHUTTER AF
SHUTTER AE
SHOOT WITHOUT LENS
SHOOT WITHOUT CARD
FOCUS RING
FOCUS RING OPERATION
AE/AF-LOCK MODE
2⁄2
AWB-LOCK MODE
APERTURE RING SETTING (A)
APERTURE SETTING
TOUCH SCREEN SETTING
224
225
225
225
226
227
227
227
228
228
228
229
229
229
230
230
D POWER MANAGEMENT
AUTO POWER OFF
PERFORMANCE
BOOST SETTING
232
233
233
x
P
FRAME NO.
SAVE ORG IMAGE
EDIT FILE NAME
SELECT FOLDER
COPYRIGHT INFO
P
234
235
235
236
236
P
D CONNECTION SETTING
Bluetooth SETTINGS
237
PC AUTO SAVE
238
instax PRINTER CONNECTION SETTING 239
CONNECTION MODE
240
USB POWER SUPPLY SETTING
241
GENERAL SETTINGS
242
INFORMATION
242
RESET WIRELESS SETTING
242
P Table of Contents
Introduction ....................................................................................................ii
For the Latest Information ................................................................................... ii
Menu List .........................................................................................................iv
Shooting Menus ........................................................................................................iv
The Playback Menu ...............................................................................................viii
Setup Menus ...............................................................................................................ix
Supplied Accessories ............................................................................. xxiii
About This Manual .................................................................................. xxiv
Symbols and Conventions .............................................................................xxiv
Terminology ............................................................................................................xxiv
1 Before You Begin
1
Parts of the Camera ......................................................................................2
The Shutter Speed Dial ..........................................................................................4
The Exposure Compensation Dial ...................................................................4
The Focus Stick (Focus Lever).............................................................................5
The DRIVE/DELETE Button ...................................................................................5
The Command Dial ..................................................................................................6
The Indicator Lamp ..................................................................................................7
The LCD Monitor ........................................................................................................8
Focusing the Viewfinder........................................................................................9
Camera Displays.......................................................................................... 10
The Electronic Viewfinder .................................................................................. 10
The LCD Monitor ..................................................................................................... 12
Adjusting Display Brightness........................................................................... 14
Display Rotation ...................................................................................................... 14
Choosing a Display Mode ................................................................................. 14
The DISP/BACK Button ........................................................................................ 16
Customizing the Standard Display .............................................................. 17
Using the Menus......................................................................................... 19
The Menus .................................................................................................................. 19
Selecting a Menu Tab........................................................................................... 20
Touch Screen Mode ................................................................................... 21
Shooting Touch Controls ................................................................................... 21
Playback Touch Controls .................................................................................... 25
xi
2 First Steps
27
3 Basic Photography and Playback
41
4 Movie Recording and Playback
47
5 Taking Photographs
55
Attaching the Strap ................................................................................... 28
Attaching a Lens ......................................................................................... 29
Inserting the Battery and a Memory Card ......................................... 30
Compatible Memory Cards .............................................................................. 32
Charging the Battery ................................................................................. 33
Turning the Camera On and Off............................................................ 35
Checking the Battery Level ..................................................................... 36
Basic Setup.................................................................................................... 37
Choosing a Different Language .................................................................... 39
Changing the Time and Date.......................................................................... 39
Taking Photographs (Mode P) ............................................................... 42
Viewing Pictures ......................................................................................... 45
Deleting Pictures ........................................................................................ 46
Recording Movies....................................................................................... 48
Recording Movies................................................................................................... 48
Adjusting Movie Settings .................................................................................. 51
Viewing Movies ........................................................................................... 52
P, S, A, and M Modes .................................................................................. 56
Mode P: Program AE ............................................................................................. 56
Mode S: Shutter-Priority AE .............................................................................. 59
Mode A: Aperture-Priority AE.......................................................................... 63
Mode M: Manual Exposure ............................................................................... 65
Front Command Dial Roles by Mode ......................................................... 67
Autofocus ...................................................................................................... 68
Focus Mode................................................................................................................ 69
Autofocus Options (AF Mode) ........................................................................ 71
Focus-Point Selection .......................................................................................... 73
Manual Focus ............................................................................................... 77
Checking Focus........................................................................................................ 78
xii
Table of Contents
Exposure Compensation ......................................................................... 80
C (Custom) .................................................................................................................. 81
Sensitivity ...................................................................................................... 82
Auto Sensitivity (A)................................................................................................. 83
Metering ........................................................................................................ 84
Focus/Exposure Lock ................................................................................ 85
Other Controls .......................................................................................................... 86
Bracketing ..................................................................................................... 87
W ISO BKT.................................................................................................................. 88
V WHITE BALANCE BKT.................................................................................... 88
s Bracketing............................................................................................................ 89
Continuous Shooting (Burst Mode) ..................................................... 92
HDR.................................................................................................................. 93
Panoramas .................................................................................................... 95
Multiple Exposures .................................................................................... 98
Filters.............................................................................................................100
Self-Portraits (Selfies) ..............................................................................101
6 The Shooting Menus
103
IMAGE QUALITY SETTING (Still Photography)................................104
IMAGE SIZE............................................................................................................... 104
IMAGE QUALITY .................................................................................................... 105
RAW RECORDING ................................................................................................. 106
FILM SIMULATION................................................................................................ 106
MONOCHROMATIC COLOR ........................................................................... 108
GRAIN EFFECT ........................................................................................................ 108
COLOR CHROME EFFECT ................................................................................ 108
COLOR CHROME FX BLUE............................................................................... 109
WHITE BALANCE................................................................................................... 109
DYNAMIC RANGE ................................................................................................. 113
D RANGE PRIORITY.............................................................................................. 114
TONE CURVE ........................................................................................................... 114
COLOR......................................................................................................................... 115
SHARPNESS.............................................................................................................. 115
HIGH ISO NR ............................................................................................................ 115
xiii
CLARITY...................................................................................................................... 116
LONG EXPOSURE NR .......................................................................................... 116
LENS MODULATION OPTIMIZER ................................................................. 116
COLOR SPACE ......................................................................................................... 117
PIXEL MAPPING ..................................................................................................... 117
SELECT CUSTOM SETTING ............................................................................. 118
EDIT/SAVE CUSTOM SETTING....................................................................... 118
AUTO UPDATE CUSTOM SETTING ............................................................. 122
xF MOUNT ADAPTER SETTING ............................................................. 123
AF/MF SETTING (Still Photography)...................................................125
FOCUS AREA ........................................................................................................... 125
FOCUS MODE......................................................................................................... 125
AF MODE................................................................................................................... 125
AF-C CUSTOM SETTINGS ................................................................................ 126
STORE AF MODE BY ORIENTATION............................................................ 130
AF POINT DISPLAY yz ................................................................................ 130
NUMBER OF FOCUS POINTS ......................................................................... 130
PRE-AF......................................................................................................................... 131
xF AF ILLUMINATOR .................................................................................... 131
FACE/EYE DETECTION SETTING .................................................................. 132
AF+MF ........................................................................................................................ 134
MF ASSIST ................................................................................................................. 135
FOCUS CHECK........................................................................................................ 135
INTERLOCK SPOT AE & FOCUS AREA ....................................................... 136
xF INSTANT AF SETTING ........................................................................... 136
xF DEPTH-OF-FIELD SCALE .................................................................... 136
RELEASE/FOCUS PRIORITY ............................................................................. 137
xF AF RANGE LIMITER ................................................................................ 137
xF TOUCH SCREEN MODE....................................................................... 138
SHOOTING SETTING (Still Photography) ..........................................140
SPORTS FINDER MODE ..................................................................................... 140
PRE-SHOT sJ .................................................................................................... 141
SELF-TIMER ............................................................................................................... 141
SAVE SELF-TIMER SETTING ............................................................................. 142
SELF-TIMER LAMP ................................................................................................ 142
xiv
Table of Contents
INTERVAL TIMER SHOOTING.......................................................................... 143
INTERVAL TIMER SHOOTING EXPOSURE SMOOTHING ................. 144
AE BKT SETTING .................................................................................................... 144
FILM SIMULATION BKT ...................................................................................... 145
FOCUS BKT SETTING .......................................................................................... 145
MULTIPLE EXPOSURE CTRL ............................................................................ 145
PHOTOMETRY ........................................................................................................ 145
SHUTTER TYPE ....................................................................................................... 146
FLICKER REDUCTION ......................................................................................... 147
IS MODE ..................................................................................................................... 147
ISO ................................................................................................................................. 148
xF WIRELESS COMMUNICATION ......................................................... 148
FLASH SETTING (Still Photography)...................................................149
FLASH FUNCTION SETTING ........................................................................... 149
RED EYE REMOVAL .............................................................................................. 149
TTL-LOCK MODE ................................................................................................... 150
LED LIGHT SETTING ............................................................................................ 150
COMMANDER SETTING.................................................................................... 151
CH SETTING ............................................................................................................. 151
MOVIE SETTING (Still Photography) ..................................................152
MOVIE MODE.......................................................................................................... 152
FILE FORMAT ........................................................................................................... 152
FULL HD HIGH SPEED REC ............................................................................. 152
F IS MODE.............................................................................................................. 152
AUDIO SETTING .................................................................................................... 153
MIC/REMOTE RELEASE ...................................................................................... 154
MOVIE SETTING (Movie Recording) ...................................................155
MOVIE MODE.......................................................................................................... 155
FILE FORMAT ........................................................................................................... 156
FULL HD HIGH SPEED REC ............................................................................. 157
FIX MOVIE CROP MAGNIFICATION C .................................................. 158
F-Log RECORDING............................................................................................... 158
4K MOVIE OUTPUT .............................................................................................. 159
FULL HD MOVIE OUTPUT................................................................................ 159
HDMI OUTPUT INFO DISPLAY ...................................................................... 160
xv
4K HDMI STANDBY QUALITY......................................................................... 160
HDMI REC CONTROL.......................................................................................... 160
F PHOTOMETRY ................................................................................................. 160
F IS MODE.............................................................................................................. 161
F ISO.......................................................................................................................... 161
ZEBRA SETTING ..................................................................................................... 162
ZEBRA LEVEL ........................................................................................................... 162
MOVIE OPTIMIZED CONTROL oL ......................................................... 162
TALLY LIGHT............................................................................................................. 163
xF WIRELESS COMMUNICATION ......................................................... 163
IMAGE QUALITY SETTING (Movie Recording) ................................164
F FILM SIMULATION ........................................................................................ 164
F MONOCHROMATIC COLOR .................................................................... 164
F WHITE BALANCE............................................................................................ 164
F DYNAMIC RANGE.......................................................................................... 165
F TONE CURVE .................................................................................................... 165
F COLOR ................................................................................................................. 165
F SHARPNESS ...................................................................................................... 166
F HIGH ISO NR..................................................................................................... 166
V INTERFRAME NR........................................................................................... 166
F PERIPHERAL LIGHT CORRECTION ....................................................... 167
xF MOUNT ADAPTER SETTING ............................................................. 167
AF/MF SETTING (Movie Recording) ...................................................168
F FOCUS AREA .................................................................................................... 168
F FOCUS MODE ................................................................................................. 168
F AF MODE ........................................................................................................... 168
F AF-C CUSTOM SETTING ............................................................................ 169
xF AF ILLUMINATOR .................................................................................... 169
F FACE/EYE DETECTION SETTING ........................................................... 170
F MF ASSIST .......................................................................................................... 170
F FOCUS CHECK ................................................................................................ 171
xF INSTANT AF SETTING ........................................................................... 171
xF DEPTH-OF-FIELD SCALE .................................................................... 171
xF AF RANGE LIMITER ................................................................................ 171
xF TOUCH SCREEN MODE....................................................................... 172
FOCUS CHECK LOCK .......................................................................................... 174
xvi
Table of Contents
AUDIO SETTING (Movie Recording) ...................................................175
INTERNAL MIC LEVEL ADJUSTMENT ........................................................ 175
EXTERNAL MIC LEVEL ADJUSTMENT ....................................................... 175
MIC JACK SETTING .............................................................................................. 176
MIC LEVEL LIMITER .............................................................................................. 176
WIND FILTER ............................................................................................................ 176
LOW CUT FILTER ................................................................................................... 176
HEADPHONES VOLUME ................................................................................... 177
MIC/REMOTE RELEASE ...................................................................................... 177
TIME CODE SETTING (Movie Recording) ..........................................178
TIME CODE DISPLAY ........................................................................................... 178
START TIME SETTING .......................................................................................... 178
COUNT UP SETTING ........................................................................................... 178
DROP FRAME .......................................................................................................... 179
HDMI TIME CODE OUTPUT ............................................................................ 179
7 Playback and the Playback Menu
181
The Playback Display...............................................................................182
The DISP/BACK Button ..................................................................................... 183
Viewing Pictures .......................................................................................185
Playback Zoom...................................................................................................... 186
Multi-Frame Playback ........................................................................................ 186
Viewing Other Pictures .................................................................................... 186
The Playback Menu..................................................................................187
RAW CONVERSION .............................................................................................. 187
ERASE .......................................................................................................................... 190
CROP ............................................................................................................................ 192
RESIZE ......................................................................................................................... 193
PROTECT.................................................................................................................... 194
IMAGE ROTATE ....................................................................................................... 195
RED EYE REMOVAL .............................................................................................. 196
VOICE MEMO SETTING ..................................................................................... 197
RATING........................................................................................................................ 198
IMAGE TRANSFER ORDER................................................................................ 199
xF WIRELESS COMMUNICATION ......................................................... 200
xvii
SLIDE SHOW............................................................................................................ 200
PHOTOBOOK ASSIST .......................................................................................... 201
PC AUTO SAVE ....................................................................................................... 202
PRINT ORDER (DPOF)......................................................................................... 203
instax PRINTER PRINT......................................................................................... 204
DISP ASPECT ........................................................................................................... 205
8 The Setup Menus
207
USER SETTING ............................................................................................208
FORMAT ..................................................................................................................... 208
DATE/TIME................................................................................................................ 209
TIME DIFFERENCE ................................................................................................ 209
Qa ......................................................................................................... 210
x MY MENU SETTING ..................................................................................... 210
F MY MENU SETTING...................................................................................... 210
SENSOR CLEANING ............................................................................................. 211
SOUND & FLASH................................................................................................... 211
RESET ........................................................................................................................... 212
REGULATORY .......................................................................................................... 212
SOUND SETTING .......................................................................................213
AF BEEP VOL. ........................................................................................................... 213
SELF-TIMER BEEP VOL. ....................................................................................... 213
OPERATION VOL.................................................................................................... 214
SHUTTER VOLUME............................................................................................... 214
SHUTTER SOUND ................................................................................................. 214
PLAYBACK VOLUME ............................................................................................ 214
SCREEN SETTING.......................................................................................215
VIEW MODE SETTING ........................................................................................ 215
EVF BRIGHTNESS................................................................................................... 215
EVF COLOR ............................................................................................................... 215
EVF COLOR ADJUSTMENT .............................................................................. 216
LCD BRIGHTNESS.................................................................................................. 216
LCD COLOR .............................................................................................................. 216
LCD COLOR ADJUSTMENT ............................................................................. 216
IMAGE DISP............................................................................................................... 217
xviii
Table of Contents
AUTOROTATE DISPLAYS ................................................................................... 217
PREVIEW EXP./WB IN MANUAL MODE..................................................... 218
NATURAL LIVE VIEW............................................................................................ 218
F-Log VIEW ASSIST............................................................................................... 219
FRAMING GUIDELINE......................................................................................... 219
AUTOROTATE PB ................................................................................................... 220
FOCUS SCALE UNITS .......................................................................................... 220
APERTURE UNIT FOR CINEMA LENS ......................................................... 220
DISP. CUSTOM SETTING.................................................................................... 220
LARGE INDICATORS MODE(EVF) ................................................................. 221
LARGE INDICATORS MODE(LCD) ................................................................ 221
LARGE INDICATORS DISP. SETTING............................................................ 222
INFORMATION CONTRAST ADJ. .................................................................. 222
x Q MENU BACKGROUND........................................................................... 223
F Q MENU BACKGROUND ........................................................................... 223
BUTTON/DIAL SETTING ..........................................................................224
FOCUS LEVER SETTING ..................................................................................... 224
x EDIT/SAVE QUICK MENU .......................................................................... 225
F EDIT/SAVE QUICK MENU .......................................................................... 225
FUNCTION (Fn) SETTING ................................................................................. 225
COMMAND DIAL SETTING ............................................................................. 226
SHUTTER AF ............................................................................................................ 227
SHUTTER AE ............................................................................................................ 227
SHOOT WITHOUT LENS .................................................................................... 227
SHOOT WITHOUT CARD .................................................................................. 228
FOCUS RING ............................................................................................................ 228
FOCUS RING OPERATION ............................................................................... 228
AE/AF-LOCK MODE............................................................................................. 229
AWB-LOCK MODE ................................................................................................ 229
APERTURE RING SETTING (A) ........................................................................ 229
APERTURE SETTING ............................................................................................ 230
TOUCH SCREEN SETTING ................................................................................ 230
POWER MANAGEMENT ..........................................................................232
AUTO POWER OFF ............................................................................................... 232
PERFORMANCE ..................................................................................................... 233
BOOST SETTING .................................................................................................... 233
xix
SAVE DATA SETTING ................................................................................234
FRAME NO. ............................................................................................................... 234
SAVE ORG IMAGE ................................................................................................. 235
EDIT FILE NAME..................................................................................................... 235
SELECT FOLDER .................................................................................................... 236
COPYRIGHT INFO ................................................................................................. 236
CONNECTION SETTING ..........................................................................237
Bluetooth SETTINGS........................................................................................... 237
PC AUTO SAVE ....................................................................................................... 238
instax PRINTER CONNECTION SETTING ................................................. 239
CONNECTION MODE ......................................................................................... 240
USB POWER SUPPLY SETTING ...................................................................... 241
GENERAL SETTINGS ............................................................................................ 242
INFORMATION........................................................................................................ 242
RESET WIRELESS SETTING ............................................................................... 242
9 Shortcuts
243
Shortcut Options ......................................................................................244
MY MENU ....................................................................................................245
MY MENU SETTING ............................................................................................. 245
The Quick Menu ........................................................................................247
The Quick Menu Display ................................................................................. 247
Viewing and Changing Settings................................................................. 249
Editing the Quick Menu................................................................................... 250
Function Controls .....................................................................................253
The Function Buttons........................................................................................ 253
Touch-Function Gestures ............................................................................... 256
xx
Table of Contents
10Peripherals and Optional Accessories
259
11Connections
281
Lenses ...........................................................................................................260
Lens Parts .................................................................................................................. 260
Removing Lens Caps ......................................................................................... 261
Attaching Lens Hoods ...................................................................................... 261
Lenses with Aperture Rings .......................................................................... 262
Lenses with No Aperture Rings .................................................................. 263
Lenses with O.I.S. Switches ............................................................................ 263
Manual Focus Lenses ........................................................................................ 264
Lens Care................................................................................................................... 265
External Flash Units .................................................................................266
Using an External Flash .................................................................................... 267
EF-X8 ............................................................................................................................ 268
SYNC TERMINAL.................................................................................................... 270
SHOE MOUNT FLASH ........................................................................................ 271
COMMANDER(OPTICAL).................................................................................. 274
Handgrips....................................................................................................278
Thumb Rests...............................................................................................279
HDMI Output..............................................................................................282
Connecting to HDMI Devices ...................................................................... 282
Shooting.................................................................................................................... 283
Playback ..................................................................................................................... 283
Wireless Connections (Bluetooth®, Wireless LAN/Wi-Fi) ............284
Smartphones and Tablets: FUJIFILM Camera Remote .................. 284
Copying Pictures to a Computer: PC AutoSave ................................ 286
Connecting via USB .................................................................................287
Connecting to Computers ............................................................................. 287
Copying Pictures to a Computer ............................................................... 290
Using Your Camera as a Webcam (FUJIFILM X Webcam) ........... 290
Converting RAW Images: FUJIFILM X RAW STUDIO ....................... 291
Backing up and Restoring Camera Settings
(FUJIFILM X Acquire) ....................................................................................... 291
Connecting to Smartphones ....................................................................... 292
xxi
Table of Contents
instax SHARE Printers ..............................................................................295
Establishing a Connection ............................................................................. 295
Printing Pictures.................................................................................................... 296
12Technical Notes
297
Accessories from Fujifilm .......................................................................298
Software for Use with Your Camera ...................................................301
FUJIFILM Camera Remote .............................................................................. 301
FUJIFILM PC AutoSave ...................................................................................... 301
RAW FILE CONVERTER EX powered by SILKYPIX .............................. 301
Capture One Express Fujifilm ....................................................................... 301
Capture One Pro Fujifilm ................................................................................. 302
FUJIFILM X Acquire ............................................................................................. 302
FUJIFILM X RAW STUDIO ................................................................................. 302
FUJIFILM X Webcam .......................................................................................... 302
For Your Safety ...........................................................................................303
Product Care...............................................................................................312
Cleaning the Image Sensor...................................................................313
Firmware Updates ....................................................................................314
Checking the Firmware Version .................................................................. 314
Troubleshooting .......................................................................................315
Warning Messages and Displays.........................................................324
Memory Card Capacity ...........................................................................328
Specifications .............................................................................................329
xxii
Supplied Accessories
The following are included with the camera:
• NP-W126S rechargeable battery
• Body cap (comes attached to camera)
• USB cable
• Headphone adapter
• Shoulder strap
• Basic Manual
O The battery is not charged at shipment. Charge the battery before use
(P 33).
N • If you purchased a lens kit, check that a lens is included.
• Purchasers of the accessory kit should confirm that it includes a hand
grip and thumb rest.
• The supplied headphone adapter converts USB Type-C connectors to
⌀3.5 mm headphone jacks.
• For information on compatible computer software, see “Software for
Use with Your Camera” (P 301).
xxiii
About This Manual
This manual contains instructions for your FUJIFILM X-E4
digital camera. Be sure you have read and understood its
contents before proceeding.
Symbols and Conventions
The following symbols are used in this manual:
O Information that should be read to prevent damage to the
product.
Additional
information that may be helpful when using the
N
product.
P Pages on which related information may be found.
Menus and other text in the displays are shown in bold. Illustrations
are for explanatory purposes only; drawings may be simplified,
while photographs are not necessarily taken with the model of
camera described in this manual.
Terminology
The optional SD, SDHC, and SDXC memory cards the camera uses
to store pictures are referred to as “memory cards”. The electronic
viewfinder may be referred to as the “EVF” and the LCD monitor
as the “LCD”.
xxiv
Before You Begin
1
Parts of the Camera
The parts of the camera are listed below.
1
Before You Begin
A Shutter button .................................................44 K AF-assist illuminator...................................131
Self-timer lamp ............................................141
B Exposure compensation dial.................. 4, 80
Tally light ........................................................163
C Q (quick menu) button ...............................247
D Shutter speed dial
L Front command dial........................................6
.................................................4, 56, 59, 63, 65 M ON/OFF switch .................................................35
E Hot shoe .........................................................267 N Fn button........................................................253
F Microphone ............................................ 50, 175 O Body cap............................................................29
G Strap eyelet .......................................................28 P Microphone/remote release connector
(⌀3.5 mm) .......................................3, 50, 154
H Connector cover
I Lens signal contacts
Q USB connector (Type-C) ...............33, 50, 287
J Lens release button ........................................29 R HDMI Micro connector (Type D) .............282
2
Parts of the Camera
1
Before You Begin
S Diopter adjustment control ...........................9 b DISP (display)/BACK button ............... 16, 183
T Electronic viewfinder (EVF)
c Cable channel cover for DC coupler .......298
..................................................... 10, 14, 16, 21 d Battery-chamber cover latch ......................30
U Eye sensor..........................................................15 e Battery-chamber cover .................................30
V DRIVE/DELETE button ........................ 5, 46, 87 f Tripod mount
W PLAY (playback) button ................................45 g Speaker .................................................... 52, 214
X AEL (exposure lock)/AFL (focus lock) button h LCD monitor ......................................... 8, 12, 14
................................................................ 86, 253
Touch screen .................................21, 138, 230
Y Indicator lamp ..........................................7, 163 i Battery chamber .............................................30
Tally light ........................................................163 j Memory card slot ............................................30
Z Focus stick (focus lever)...................5, 74, 224 k Battery latch.....................................................31
a MENU/OK button.............................................19 l Serial number plate......................... see below
O P Use of an optional RR-100 remote release requires a third-party
adapter to convert the female three-pin, ⌀2.5 mm connector to a
male three-pin, ⌀3.5 mm connector.
l Do not remove the serial number plate, which provides the CMIIT ID,
serial number, and other important information.
3
The Shutter Speed Dial
Rotate the shutter speed dial to choose
the shutter speed (P 56).
1
Before You Begin
The Exposure Compensation Dial
Rotate the dial to choose an exposure
compensation amount (P 80).
4
Parts of the Camera
The Focus Stick (Focus Lever)
Tilt or press the focus stick to select the focus area. The focus stick can also be used
to navigate the menus.
1
The DRIVE/DELETE Button
Pressing the DRIVE/DELETE button displays
drive-mode menu, where you can choose
from the following the drive modes.
B
J
O
W
V
BKT
Mode
Single frame
High-speed burst
Low-speed burst
ISO BKT
WHITE BALANCE BKT
Bracketing
P
42
92
92
88
88
89
Mode
h HDR
Adv. MODE
Adv. • u Panorama
• j Multiple Exposure
Y Filter
F Movie
P
93
95
98
100
48
5
Before You Begin
N
To choose the role played by the focus stick, press and hold the center
of the stick or use D BUTTON/DIAL SETTING > FOCUS LEVER SETTING (P 224).
The Command Dial
The front command dial is used for the
operations below.
1
Before You Begin
Shooting
• Choose the desired combination of shutter speed and aperture (program shift).
• Choose a shutter speed.
• Adjust aperture.
• Adjust exposure compensation.
• Adjust sensitivity.
N • During shooting, the role of the front command dial changes each
time the center of the dial is pressed.
• For information on the roles performed by the dials during shooting,
see “Front Command Dial Roles by Mode” (P 67).
Menus
Rotate the dial to select menu tabs or page through menus.
Q Menu
Rotate the dial to change settings in the quick menu and press the center of the
dial to select.
Playback
• View other pictures.
• Zoom in or out during full- or multi-frame playback.
N Press the center of the front command dial to switch between the two
roles.
6
Parts of the Camera
The Indicator Lamp
Camera status is shown by the indicator
lamp.
1
Blinks green and
orange
Glows orange
Blinks orange
Blinks red
Camera status
Focus locked.
Focus or slow shutter speed warning. Pictures can be taken.
• Camera on: Recording pictures. Additional pictures can be
taken.
• Camera off: Uploading pictures to a smartphone or tablet. *
Recording pictures. No additional pictures can be taken at
this time.
Flash charging; flash will not fire when picture is taken.
Lens or memory error.
* Displayed only if pictures are selected for upload.
N • Warnings may also appear in the display.
• The indicator lamp remains off while your eye is to the viewfinder.
• The B MOVIE SETTING > TALLY LIGHT option can be used to
choose the lamp (indicator or AF-assist) that lights during movie recording and whether the lamp blinks or remains steady.
7
Before You Begin
Indicator lamp
Glows green
Blinks green
The LCD Monitor
You can adjust the angle of the LCD monitor when framing shots, but be careful not
to trap your fingers or other objects.
1
Before You Begin
O • Do not apply excessive force to the hinge when rotating the LCD
monitor, as this could damage the hinge.
• Be careful that the corners of the monitor do not contact the camera
body, as this could leave marks.
N The LCD monitor also functions as a touch screen that can be used for:
• Touch photography (P 22)
• Focus area selection (P 21)
• Function selection (P 24)
• Movie optimized control oL (P 23)
• Playback (P 25)
Tilting the LCD Monitor
Be sure the LCD monitor doesn’t block the eye sensor during shooting, as
this will cause the display to flip.
Eye sensor
Normal display
8
Display flipped
Parts of the Camera
Focusing the Viewfinder
If the indicators displayed in the viewfinder are blurred, put your eye to the
viewfinder and rotate the diopter adjustment control until the display is in sharp
focus.
1
Before You Begin
9
Camera Displays
This section lists the indicators that may be displayed
during shooting.
O For illustrative purposes, displays are shown with all indicators lit.
The Electronic Viewfinder
1
Before You Begin
A
3
2
B CD
EF
G H I
J K L M NO
12/31/2020 12:10 AM
P
Q
R
1
0
z
S
T
y
x
U
V
W
X
Y
w
v
u
t
s
r qp o
10
n m l k j i hg f
e
dcba Z
Camera Displays
A Crop factor .....................................................140
B Focus check ............................................ 78, 135
C Depth-of-field preview...........................64, 78
D Location data download status.....242, 284
E Bluetooth ON/OFF.......................................237
F Image transfer status ........................237, 284
G Movie mode ........................................... 48, 155
H Full HD high-speed recording ..................157
I Recording time available/
1 Shows “9999” if there is space for over 9999 frames.
2 Not displayed when ON is selected for D SCREEN SET-UP > LARGE INDICATORS
MODE(EVF).
11
1
Before You Begin
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
a
b
elapsed recording time ..............................48
Date and time..................................37, 39, 209
Number of available frames 1...................328
Image size ......................................................104
File format......................................................156
Image quality................................................105
Temperature warning ................................327
Touch screen mode .............................. 21, 138
White balance ..............................................109
AWB lock ........................................................229
Film simulation ............................................106
F-Log recording ............................................158
Dynamic range ............................................113
D-range priority ...........................................114
Movie optimized control ..............................23
Sound and flash indicator ........................211
Virtual horizon.................................................18
Boost mode ...................................................233
Histogram .........................................................18
Distance indicator 2 ........................................78
c Power supply....................................................34
d Battery level ......................................................36
e Sensitivity ..........................................................82
f Exposure compensation ...............................80
g Focus frame ...............................................73, 85
h Aperture...............................................58, 63, 65
i Time code.......................................................178
j Shutter speed .....................................58, 59, 65
k TTL lock ..................................................150, 255
l AE lock...................................................... 86, 229
m Metering ............................................................84
n Shooting mode ...............................................56
o Focus mode 2 ....................................................69
p Focus indicator 2 ..............................................70
q Manual focus indicator 2 .......................69, 77
r AF lock...................................................... 86, 229
s Mic jack setting ............................................176
t Recording level 2 ...........................................175
u AF+MF indicator 2 .......................................134
v Shutter type ...................................................146
w Continuous mode...........................................92
x Exposure indicator..........................................65
y Self-timer indicator .....................................141
z Microphone ......................................................50
0 Remote release ................................................62
1 Flash (TTL) mode .........................................271
2 IS mode 2 .........................................................147
3 Flash compensation ...................................271
The LCD Monitor
H
A BC D E
I
FG
M
J K
2
1
L
N
O P Q
12/31/2020 12 :10
Before You Begin
1
0
z
S
T
U
y
x
V
W
w
X
v
u
t
s
Y
12800
nm
r q p o
12
R
lk
j
i
h
g f
e d cbaZ
Camera Displays
elapsed recording time ..............................48
L Number of available frames 1...................328
M Image size ......................................................104
N File format......................................................156
O Image quality................................................105
P Date and time..................................37, 39, 209
Q Touch screen mode .............................. 21, 138
R AWB lock ........................................................229
S White balance ..............................................109
T Film simulation ............................................106
U F-Log recording ............................................158
V Dynamic range ............................................113
W D-range priority ...........................................114
X Movie optimized control ..............................23
Y Boost mode ...................................................233
Z Temperature warning ................................327
a Sound and flash indicator ........................211
b Power supply....................................................34
c Battery level ......................................................36
d Distance indicator 2 ........................................78
e Sensitivity ..........................................................82
f Histogram .........................................................18
g Exposure compensation ...............................80
h Aperture...............................................58, 63, 65
i Time code.......................................................178
j Shutter speed .....................................58, 59, 65
k TTL lock ..................................................150, 255
l AE lock...................................................... 86, 229
m Metering ............................................................84
n Shooting mode ...............................................56
o Focus mode 2 ....................................................69
p Focus indicator 2 ..............................................70
q Manual focus indicator 2 .......................69, 77
r AF lock...................................................... 86, 229
s Mic jack setting ............................................176
t AF+MF indicator 2 .......................................134
u Shutter type ...................................................146
v Recording level 2 ...........................................175
w Continuous mode...........................................92
x Exposure indicator..........................................65
y Self-timer indicator .....................................141
z Microphone ......................................................50
0 Remote release ................................................62
1 Flash (TTL) mode .........................................271
2 IS mode 2 .........................................................147
1 Shows “9999” if there is space for over 9999 frames.
2 Not displayed when ON is selected for D SCREEN SET-UP > LARGE INDICATORS
MODE(LCD).
13
1
Before You Begin
A Crop factor .....................................................140
B Flash compensation ...................................271
C Focus check ............................................ 78, 135
D Depth-of-field preview...........................64, 78
E Location data download status.....242, 284
F Bluetooth ON/OFF.......................................237
G Image transfer status ........................237, 284
H Movie mode ........................................... 48, 155
I Full HD high-speed recording ..................157
J Focus frame ...............................................73, 85
K Recording time available/
Adjusting Display Brightness
The brightness and hue of the viewfinder and LCD monitor can
be adjusted using the items in the D SCREEN SET-UP menu.
Choose EVF BRIGHTNESS or EVF COLOR to adjust viewfinder
brightness or hue, LCD BRIGHTNESS or LCD COLOR to do the
same for the LCD monitor.
1
Before You Begin
Display Rotation
When ON is selected for D SCREEN SET-UP > AUTOROTATE
DISPLAYS, the indicators in the viewfinder and LCD monitor automatically rotate to match camera orientation.
Choosing a Display Mode
Use D SCREEN SET-UP > VIEW MODE SETTING to choose from
the following display modes. You can choose separate display
modes for shooting and playback.
SHOOTING
Option
Description
Putting your eye to the viewfinder turns the viewfinder
on and the LCD monitor off ; taking your eye away turns
E EYE SENSOR
the viewfinder off and LCD monitor on.
Viewfinder on, LCD monitor off.
Q EVF ONLY
LCD monitor on, viewfinder off.
r LCD ONLY
Putting your eye to the viewfinder turns the viewfinder
Q EVF ONLY + E on; taking it away turns the viewfinder off. The LCD monitor remains off.
Putting your eye to the viewfinder during shooting
turns the viewfinder on, but the LCD monitor is used for
t EYE SENSOR + the display of images once you remove your eye from
the viewfinder after shooting. The options selected for
LCD IMAGE DISP.
D SCREEN SET-UP > IMAGE DISP. apply to display
in the LCD monitor.
14
Camera Displays
PLAYBACK
Option
E EYE SENSOR
Q EVF ONLY
r LCD ONLY
Description
Putting your eye to the viewfinder turns the viewfinder
on and the LCD monitor off ; taking your eye away turns
the viewfinder off and LCD monitor on.
Viewfinder on, LCD monitor off.
LCD monitor on, viewfinder off.
Before You Begin
The Eye Sensor
The eye sensor may respond to objects other
than your eye or to light shining directly on the
sensor.
1
Eye sensor
15
The DISP/BACK Button
The DISP/BACK button controls the display
of indicators in the viewfinder and LCD
monitor.
N Indicators for the EVF and LCD must be
selected separately. To choose the EVF
display, place your eye to the viewfinder
while using the DISP/BACK button.
1
Before You Begin
Viewfinder (EVF)
Standard indicators
Full screen
(no indicators)
LCD Monitor
Standard indicators
No indicators
Info display (still photography only)
16
Camera Displays
Customizing the Standard Display
To choose the items shown in the standard indicator display:
Display standard indicators.
Use the DISP/BACK button to display standard indicators.
2
Select DISP. CUSTOM SETTING.
Select D SCREEN SET-UP > DISP. CUSTOM SETTING in the
setup menu.
3
Choose items.
Highlight items and press MENU/OK to select or deselect.
Item
FRAMING GUIDELINE
ELECTRONIC LEVEL
FOCUS FRAME
AF DISTANCE INDICATOR
MF DISTANCE INDICATOR
HISTOGRAM
LIVE VIEW HIGHLIGHT ALERT
SHOOTING MODE
APERTURE/S-SPEED/ISO
INFORMATION BACKGROUND
Expo. Comp. (Digit)
Expo. Comp. (Scale)
FOCUS MODE
PHOTOMETRY
SHUTTER TYPE
FLASH
4
5
Default
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Item
CONTINUOUS MODE
DUAL IS MODE
TOUCH SCREEN MODE
WHITE BALANCE
FILM SIMULATION
DYNAMIC RANGE
BOOST MODE
FRAMES REMAINING
IMAGE SIZE/QUALITY
MOVIE MODE & REC. TIME
IMAGE TRANSFER ORDER
MIC LEVEL
GUIDANCE MESSAGE
BATTERY LEVEL
FRAMING OUTLINE
Default
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Press DISP/BACK to save changes.
Press DISP/BACK as needed to exit the menus and return to the
shooting display.
17
1
Before You Begin
1
Camera Displays
1
Virtual Horizon
Selecting ELECTRONIC LEVEL displays a virtual horizon. The camera is level when the two
lines overlap. Note that the virtual horizon may
not be displayed if the camera lens is pointed
up or down. For a 3D display (shown), press the
function button to which ELECTRONIC LEVEL
is assigned (P 253).
Pitch
Roll
Before You Begin
Framing Outline
Enable FRAMING OUTLINE to make the borders of the frame easier to see
against dark backgrounds.
Histograms
Histograms show the distribution of tones in the image. Brightness is
shown by the horizontal axis, the number of pixels by the vertical axis.
Number of pixels
Shadows
Highlights
Pixel brightness
• Optimal exposure: Pixels are distributed in an even curve
throughout the tone range.
• Overexposed: Pixels are clustered on the right side of
the graph.
• Underexposed: Pixels are clustered on the left side of
the graph.
To view separate RGB histograms and a display showing areas of the frame that will be
overexposed at current settings superimposed
on the view through the lens, press the function button to which HISTOGRAM is assigned
(P 253).
A Overexposed areas blink
B RGB histograms
18
Using the Menus
To display the menus, press MENU/OK.
Still photography
IMAGE QUALITY SETTING
Movie recording
MOVIE SETTING
MOVIE MODE
FILE FORMAT
FULL HD HIGH SPEED REC
FIX MOVIE CROP MAGNIFICATION
F-Log RECORDING
4K MOVIE OUTPUT
FULL HD MOVIE OUTPUT
HDMI OUTPUT INFO DISPLAY
IMAGE SIZE
IMAGE QUALITY
RAW RECORDING
FILM SIMULATION
MONOCHROMATIC COLOR
GRAIN EFFECT
COLOR CHROME EFFECT
COLOR CHROME FX BLUE
EXIT
EXIT
Playback
PLAY BACK MENU
RAW CONVERSION
ERASE
CROP
RESIZE
PROTECT
IMAGE ROTATE
RED EYE REMOVAL
VOICE MEMO SETTING
EXIT
19
1
Before You Begin
The Menus
Different menus are displayed during still photography, movie
recording, and playback.
Using the Menus
Selecting a Menu Tab
To navigate the menus:
1
Press MENU/OK to display the menus.
1
Before You Begin
IMAGE QUALITY SETTING
IMAGE SIZE
IMAGE QUALITY
RAW RECORDING
FILM SIMULATION
MONOCHROMATIC COLOR
GRAIN EFFECT
COLOR CHROME EFFECT
COLOR CHROME FX BLUE
EXIT
2
Press the focus stick (focus lever)
left to highlight the tab for the current menu.
IMAGE QUALITY SETTING
IMAGE SIZE
IMAGE QUALITY
RAW RECORDING
FILM SIMULATION
MONOCHROMATIC COLOR
GRAIN EFFECT
COLOR CHROME EFFECT
COLOR CHROME FX BLUE
EXIT
Tab
3
Press the focus stick up or down to highlight the tab containing the desired item.
4
Press the focus stick right to place the cursor in the menu.
N The front command dial can be used to highlight items when menus
are displayed.
20
Touch Screen Mode
The LCD monitor also functions as a touch screen.
TOUCH SCREEN SETTINGS
TOUCH SCREEN SETTING
DOUBLE TAP SETTING
ON
TOUCH FUNCTION
TOUCH SCREENOFF
SETTING
EVF TOUCH SCREEN AREA SETTINGS
EVF
The LCD monitor can be used to select the focus area while pictures are being framed in the electronic viewfinder (EVF). Use
D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > EVF
TOUCH SCREEN AREA SETTINGS to choose the area of the monitor employed for touch controls.
N When FACE DETECTION ON is selected for G AF/MF SETTING >
FACE/EYE DETECTION SETTING, you can choose the face used for
focus.
21
1
Before You Begin
Shooting Touch Controls
To enable touch controls, select ON for
D BUTTON/DIAL SETTING > TOUCH
SCREEN SETTING > x TOUCH SCREEN
SETTING.
LCD Monitor
The operation performed can be selected
by tapping the touch screen mode indicator in the display. Touch controls can be
used for the following operations:
1
Mode
Description
Before You Begin
Tap your subject in the display to focus and release the shutter.
TOUCH
In burst mode, pictures will be taken while you keep your finger
SHOOTING on the display.
• If SINGLE AF is selected for focus mode, the camera will fo-
AF
AF OFF
cus when you tap your subject in the display. Focus locks at
the current distance until you tap the AF OFF icon.
• If CONTINUOUS AF is selected for focus mode, the camera
will initiate focus when you tap your subject in the display.
The camera will continue to adjust focus for changes in the
distance to the subject until you tap the AF OFF icon.
• When MANUAL FOCUS is selected for focus mode, you can
tap the display to focus on the selected subject using autofocus.
AREA
Tap to select a point for focus or zoom. The focus frame will
move to the selected point.
OFF
Touch controls disabled.
O Different touch controls are used during focus zoom (P 139).
N • To disable touch controls and hide the touch screen mode indica-
tor, select OFF for D BUTTON/DIAL SETTING > TOUCH SCREEN
SETTING > x TOUCH SCREEN SETTING.
• Touch control settings can be adjusted using G AF/MF SETTING >
xF TOUCH SCREEN MODE. For information on the touch
controls available during movie recording, see “Movie Recording
(xF TOUCH SCREEN MODE; P 172)”.
22
Touch Screen Mode
N • Enabling movie-optimized controls disables the shutter speed and
exposure compensation dials and aperture ring.
movie-optimized control is enabled, the movie-optimized
mode button can be used to change shooting settings or disable
movie-optimized control.
• When
23
1
Before You Begin
MOVIE OPTIMIZED CONTROL oL
Selecting ON for B MOVIE SETTING >
MOVIE OPTIMIZED CONTROL oL or
tapping the movie-optimized mode button in the shooting display optimizes the
command dials and touch controls for
movie recording. This can be used to preMovie-optimized
vent camera sounds being recorded with
mode button
movie footage.
• SHUTTER SPEED
• WIND FILTER
• APERTURE
• HEADPHONES VOLUME
• EXPOSURE COMPENSATION • F FILM SIMULATION
• ISO
• F WHITE BALANCE
• INTERNAL MIC LEVEL
• F FOCUS MODE
ADJUSTMENT/EXTERNAL MIC
LEVEL ADJUSTMENT
1
Before You Begin
Touch Function
Functions can be assigned to the following flick gestures in much the same way
as function buttons (P 256):
• Flick up: T-Fn1
• Flick left: T-Fn2
• Flick right: T-Fn3
• Flick down: T-Fn4
N • In some cases, touch-function flick ges-
tures display a menu; tap to select the
desired option.
• Touch-function gestures are disabled by
default. To enable touch-function gestures, select ON for D BUTTON/DIAL
SETTING > TOUCH SCREEN SETTING >
c TOUCH FUNCTION.
24
INTERNAL MIC LEVEL ADJUSTMENT
SET
CANCEL
Touch Screen Mode
Playback Touch Controls
When ON is selected for D BUTTON/DIAL SETTING > TOUCH
SCREEN SETTING > a TOUCH SCREEN SETTING, touch controls
can be used for the following playback operations:
• Swipe: Swipe a finger across the display
to view other images.
1
Before You Begin
• Pinch-out: Place two fingers on the display and spread them apart to zoom in.
• Pinch-in: Place two fingers on the display
and slide them together to zoom out.
N Pictures can be zoomed out until the entire image is visible but no
further.
• Double-tap: Tap the display twice to zoom
in on the focus point.
• Drag:
View other areas of the image
during playback zoom.
25
MEMO
26
First Steps
27
Attaching the Strap
Attach the strap.
Attach the strap to the two strap eyelets as shown below.
2
First Steps
O • To avoid dropping the camera, be sure the strap is correctly secured.
• Do not attach the strap buckles to the strap eyelets. Failure to observe
this precaution could deform or break the strap eyelets.
28
Attaching a Lens
The camera can be used with lenses for the FUJIFILM
X-mount.
Remove the body cap from the camera
and the rear cap from the lens. Place the
lens on mount, keeping the marks on the
lens and camera aligned (A), and then
rotate the lens until it clicks into place
(B).
2
not enter the camera.
• Be careful not to touch the camera’s internal parts.
• Rotate the lens until it clicks securely into place.
• Do not press the lens release button while attaching the lens.
Removing Lenses
To remove the lens, turn the camera off, then
press the lens release button (A) and rotate the
lens as shown (B).
O To prevent dust accumulating on the lens
or inside the camera, replace the lens caps
and camera body cap when the lens is not
attached.
Lenses and Other Optional Accessories
The camera can be used with lenses and accessories for the FUJIFILM
X-mount.
O Observe the following precautions when attaching or removing (exchanging) lenses.
• Check that the lenses are free of dust and other foreign matter.
• Do not change lenses in direct sunlight or under another bright light
source. Light focused into the interior of the camera could cause it to
malfunction.
• Attach the lens caps before exchanging lenses.
29
First Steps
O • When attaching lenses, ensure that dust or other foreign matter does
Inserting the Battery and a Memory Card
Insert the battery and memory card as described below.
1
Slide the battery-chamber cover latch
as shown and open the battery-chamber cover.
2
Insert the battery.
Using the battery to keep the battery latch pressed to one side, insert the battery contacts first in the
direction shown by the arrow.
3
Insert the memory card.
2
First Steps
N The
optional SD, SDHC, and SDXC
memory cards the camera uses to store
pictures are referred to as “memory
cards”.
4
30
Close the battery-chamber cover and slide the battery-chamber cover latch closed.
Inserting the Battery and a Memory Card
Removing the Battery
Before removing the battery or memory card, turn the camera off and open
the battery-chamber cover.
To remove the battery, press the battery latch to
the side, and slide the battery out of the camera
as shown.
ments. Observe caution when removing the battery.
Removing Memory Cards
To remove the memory card, press it in and release it slowly. The card can then be removed
by hand.
O • Press the center of the card when ejecting it.
• When a memory card is removed, the card could be ejected too
quickly. Use your finger to hold it and gently release the card.
31
2
First Steps
O The battery may become hot when used in high-temperature environ-
Inserting the Battery and a Memory Card
2
Compatible Memory Cards
• The camera can be used with SD, SDHC, and SDXC memory
cards.
• The camera supports UHS-I memory cards.
• To record movies, use cards with a UHS speed class of 3 or better
or a video speed class of V30 or better.
• A list of supported memory cards is available on the Fujifilm
website. For details, visit:
https://fujifilm-x.com/support/compatibility/cameras/.
First Steps
O • Do not turn the camera off or remove the memory card while the memo-
ry card is being formatted or data are being recorded to or deleted from
the card. Failure to observe this precaution could damage the card.
• Memory cards can be locked, making it
impossible to format the card or to record
or delete images. Before inserting a memory card, slide the write-protect switch to
the unlocked position.
• Memory cards are small and can be swallowed; keep out of reach of
children. If a child swallows a memory card, seek medical assistance
immediately.
• miniSD or microSD adapters that are larger or smaller than memory
cards may not eject normally; if the card does not eject, take the camera to an authorized service representative. Do not forcibly remove
the card.
• Do not affix labels or other objects to memory cards. Peeling labels
can cause camera malfunction.
• Movie recording may be interrupted with some types of memory card.
• Formatting a memory card in the camera creates a folder in which
pictures are stored. Do not rename or delete this folder or use a computer or other device to edit, delete, or rename image files. Always
use the camera to delete pictures; before editing or renaming files,
copy them to a computer and edit or rename the copies, not the
originals. Renaming the files on the camera can cause problems
during playback.
32
Charging the Battery
The battery is not charged at shipment. Charge the battery
before use.
O • An NP-W126S rechargeable battery is supplied with the camera.
• Turn the camera off for charging.
• The camera can be charged via USB. USB charging is available
with computers with a manufacturer-approved operating system and USB interface.
2
First Steps
Leave the computer on during charging.
O • The battery will not charge while the camera is on.
• Connect the supplied USB cable.
• Connect the camera directly to the computer; do not use a USB hub
or keyboard.
• Charging stops if the computer enters sleep mode. To resume
charging, activate the computer and disconnect and reconnect the
USB cable.
• Charging may not be supported depending on the model of computer, computer settings, and the computer’s current state.
• The battery takes about 5 hours to charge with a charging input of
5 V/500 mA.
• To charge the battery from a household AC power outlet, use a
BC-W126S battery charger (available separately).
33
Charging the Battery
Charge Status
The indicator lamp shows battery charge status
as follows:
Indicator lamp
On
Off
Blinks
2
Battery status
Battery charging.
Charging complete.
Charging error.
First Steps
O • Do not affix labels or other objects to the battery. Failure to observe
this precaution could make it impossible to remove the battery from
the camera.
• Do not short the battery terminals. The battery could overheat.
• Read the cautions in “The Battery and Power Supply”.
• Use only genuine Fujifilm rechargeable batteries designated for use
in this camera. Failure to observe this precaution could result in product malfunction.
• Do not remove the labels from the battery or attempt to split or peel
the outer casing.
• The battery gradually loses its charge when not in use. Charge the
battery one or two days before use.
• If the battery fails to hold a charge, it has reached the end of its
charging life and must be replaced.
• Remove dirt from the battery terminals with a clean, dry cloth. Failure
to observe this precaution could prevent the battery from charging.
• Note that charging times increase at low or high temperatures.
N • If the camera is turned on during charging,
charging will end and the USB connection
will instead be used to power the camera.
The battery level will begin to gradually
decline (P 241).
• The camera will display a “power supply” icon when powered via USB.
34
Turning the Camera On and Off
Use the ON/OFF switch to turn the camera on and off.
Slide the switch to ON to turn the camera
on, or to OFF to turn the camera off.
O Fingerprints and other marks on the lens or viewfinder can affect picN • Pressing the PLAY button during shooting starts playback.
• Press the shutter button halfway to return to shooting mode.
• The camera will turn off automatically if no operations are performed
for the length of time selected for D POWER MANAGEMENT >
AUTO POWER OFF. To reactivate the camera after it has turned off
automatically, press the shutter button halfway or turn the ON/OFF
switch to OFF and then back to ON.
35
2
First Steps
tures or the view through the viewfinder. Keep the lens and viewfinder clean.
Checking the Battery Level
After turning the camera on, check the battery level in the
display.
Battery level is shown as follows:
2
First Steps
Indicator
e
f
g
h
i
i
(red)
j
(blinks red)
36
Description
Battery partially discharged.
Battery about 80% full.
Battery about 60% full.
Battery about 40% full.
Battery about 20% full.
Low battery. Charge as soon as possible.
Battery exhausted. Turn camera off and recharge battery.
Basic Setup
When you turn the camera on for the first time, you can
choose a language and set the camera clock. At default
settings, you can also pair the camera with a smartphone
or tablet so that you can later synchronize the clocks or
download pictures. Follow the steps below when turning
the camera on for the first time.
N If you intend to pair the camera with a smartphone or tablet, install
1
Turn the camera on.
A language-selection dialog will be
displayed.
2
Choose a language.
Highlight a language and press
MENU/OK.
3
Pair the camera with the smartphone or tablet.
Press MENU/OK to pair the camera with
a smartphone or tablet running the
FUJIFILM Camera Remote app.
PAIRING REGISTRATION
PAIR WITH SMARTPHONE?
N
To skip pairing, press DISP/BACK.
IMAGES CAN BE EASILY TRANSFERRED
TO SMARTPHONE BY PAIRING
SCAN QR CODE OR SEARCH FOR "FUJIFILM
Camera Remote" APP ON THE WEB
SET
SKIP
HELP
37
2
First Steps
and launch the latest version of the FUJIFILM Camera Remote App on
the smart device before proceeding. For more information, visit:
http://app.fujifilm-dsc.com/en/camera_remote/
4
Check the time.
When pairing is complete, you will be
prompted to set the camera clock to
the time reported by the smartphone
or tablet. Check that the time is correct.
PAIRING REGISTRATION
PAIRING COMPLETE
12/31/2020 12:10 AM
SET DATE/TIME FROM SMARTPHONE?
SET
N
2
5
CANCEL
To set the clock manually, press DISP/BACK (P 39).
First Steps
Synchronize the camera settings with
the settings configured on your smartphone or tablet.
START MENU
SMARTPHONE SYNC. SETTING
LOCATION&TIME
LOCATION
TIME
OFF
SET
N
The option selected can be changed at any time using
D CONNECTION SETTING > Bluetooth SETTINGS.
6
Set the clock.
Press MENU/OK to set the camera clock to the time reported by
the smartphone or tablet and exit to shooting mode.
7
Format the memory card (P 208).
O Format memory cards before first use, and be sure to reformat all
memory cards after using them in a computer or other device.
N If the battery is removed for an extended period, the camera clock will
be reset and the language-selection dialog will be displayed when the
camera is turned on.
Skipping the Current Step
If you skip a step, a confirmation dialog will be displayed; select NO to avoid
repeating any steps you skipped the next time the camera is turned on.
38
Basic Setup
Choosing a Different Language
To change the language:
1
Display language options.
Select D USER SETTING > Qa.
2
Choose a language.
Highlight the desired option and press MENU/OK.
Changing the Time and Date
To set the camera clock:
2
First Steps
1
Display DATE/TIME options.
Select D USER SETTING > DATE/TIME.
2
Set the clock.
Press the focus stick (focus lever) left or right to highlight the
year, month, day, hour, or minute and press up or down to
change. Press MENU/OK to set the clock.
39
MEMO
40
Basic Photography and
Playback
41
Taking Photographs (Mode P)
This section describes how to take pictures using program
AE (mode P). See pages 56–65 for information on S, A,
and M modes.
3
Basic Photography and Playback
1
Press the DRIVE/DELETE button and select STILL IMAGE in the drive-mode
menu.
2
Rotate the shutter-speed dial to P
and confirm that the camera displays
shooting information for program AE.
3
Check the shooting mode.
Confirm that P appears in the display.
42
Taking Photographs (Mode P)
4
Ready the camera.
• Hold the camera steady with both
hands—shaking or unsteady hands
can blur your shots.
• To prevent pictures that are out of
focus or too dark (underexposed),
keep your fingers and other objects
away from the lens and AF-assist illuminator.
Basic Photography and Playback
5
3
Frame the picture.
Lenses with Zoom Rings
Use the zoom ring to frame the picture in
the display. Rotate the ring left to zoom
out, right to zoom in.
A
43
6
Press the shutter button halfway to
set focus and exposure.
Focus indicator
Focus frame
• If the camera is able to focus, the focus frame and focus indicator will glow green.
• If the camera is unable to focus, the focus frame will turn red, s
will be displayed, and the focus indicator will blink white.
3
Basic Photography and Playback
N • If the subject is poorly lit, the AF-assist illuminator may light to
assist the focus operation.
• Focus and exposure will lock when the shutter button is pressed
halfway. Focus and exposure remain locked while the button is
kept in this position (AF/AE lock).
• The camera will focus on subjects at any distance in the macro
and standard focus ranges for the lens.
7
44
Smoothly press the shutter button the rest of the way down
to take the picture.
Viewing Pictures
Pictures can be viewed in the viewfinder or LCD monitor.
To view pictures full frame, press the PLAY button.
100-0001
N • To page through pictures, press and then rotate the front command
dial (P 6). You can also use swipe gestures.
• Pictures taken using other cameras are marked with a m (“gift im-
age”) icon to warn that they may not display correctly and that playback zoom may not be available.
45
3
Basic Photography and Playback
Press the focus stick (focus lever) left to page through pictures in
reverse order. Press it right to page through pictures in the order
recorded. Keep the stick pressed to scroll rapidly to the desired
frame.
Deleting Pictures
Use the DRIVE/DELETE button to delete pictures.
O Deleted pictures cannot be recovered. Protect important pictures or
copy them to a computer or other storage device before proceeding.
1
With a picture displayed full frame, press the DRIVE/DELETE button and select FRAME.
ERASE
FRAME
SELECTED FRAMES
ALL FRAMES
3
Basic Photography and Playback
2
Choose a picture and press MENU/OK to delete it.
• The picture will be deleted when the MENU/OK button is
pressed; a confirmation dialog is not displayed. Be careful
not to accidentally delete pictures you wish to keep.
• Additional pictures can be deleted using the MENU/OK button. Display the desired pictures and press MENU/OK to delete them one by one.
N • Protected pictures cannot be deleted. Remove protection from any
pictures you wish to delete (P 194).
• Pictures can also be deleted from the menus using the C PLAY BACK
MENU > ERASE option (P 190).
46
Movie Recording and
Playback
47
Recording Movies
Record movies with sound.
Recording Movies
Movies can be recorded by pressing the shutter button when
F (movie) is selected in the drive-mode menu or by pressing
the function button to which MOVIE RECORDING RELEASE is
assigned.
The Drive-Mode Menu (F Movie)
Selecting F (movie) in the drive-mode menu and recording
movies using the shutter button gives you control over a variety
of camera settings.
4
Movie Recording and Playback
1
Press the DRIVE/DELETE button and select MOVIE in the drive-mode menu.
2
Press the shutter button all the way
down.
Recording will start.
• A recording indicator (V) is displayed while recording is in progress.
• The display shows the elapsed recording time.
3
Press the shutter button again to end recording.
Recording ends automatically when the movie reaches
29 minutes 59 seconds or the memory card is full.
48
Recording Movies
Using a Function Button (MOVIE RECORDING RELEASE)
Use the function button to which MOVIE RECORDING RELEASE
is assigned to quickly and easily record movies while in still photography mode.
N The camera automatically enables autoexposure and selects
CONTINUOUS AF for focus mode.
1
2
Press the button again to end recording.
Recording ends automatically when the movie reaches
29 minutes 59 seconds or the memory card is full.
N The movie recording release option is intended for point-and-shoot
movie recording; camera settings cannot be adjusted.
Temperature Warnings
The camera automatically turns off to protect itself when its temperature or
the temperature of the battery rises. If a temperature warning is displayed,
image noise may increase. Turn the camera off and wait for it to cool before
turning it on again (P 327).
49
4
Movie Recording and Playback
3
Assign MOVIE RECORDING RELEASE to a function button
(P 253).
Press the selected button to start
recording.
• A recording indicator (V) is displayed while recording is in progress.
• The display shows the elapsed recording time.
O • Use a memory card with a UHS speed class of 3 or better when recording movies.
• Sound is recorded via the built-in microphone or an optional external
microphone. Do not cover the microphone during recording.
• Note that the microphone may pick up lens noise and other sounds
made by the camera during recording.
• Vertical or horizontal streaks may appear in movies containing very
bright subjects. This is normal and does not indicate a malfunction.
• The temperature of the camera may rise
depending on ambient temperature and
length of use. The back of the camera
and the area around the back of the LCD
monitor in particular may become hot
when the monitor is tilted; precaution is
advised.
4
Movie Recording and Playback
N • The indicator lamp lights while recording is in progress.
• In the case of zoom lenses, zoom can be adjusted during recording
using the zoom ring (if available).
• Exposure compensation can be adjusted during recording, but only
by a maximum of ±2 EV.
• Recording may be unavailable at some settings, while in other cases
settings may not apply during recording.
• Headphones connected via USB can be used to monitor audio during
movie recording. Use the supplied headphone adapter to convert
the USB connector to a plug for a headphone jack.
Using an External Microphone
Sound can be recorded with external microphones that connect using jacks 3.5 mm in diameter; microphones that require plug-in power cannot be used. See the microphone manual
for details.
50
Recording Movies
Adjusting Movie Settings
Movie settings can be adjusted from the movie menus or using
the B MOVIE SETTING item in the photo menus (P 19).
• A simplified menu of movie settings can be accessed via the
B MOVIE SETTING item in the photo menus (P 152).
• The movie menus contain options for use when recording movies via the shutter button with MOVIE selected in the drivemode menu (P 155).
O Changes made using the B MOVIE SETTING item in the photo menus
also apply to the movie menus. Changes made in one set of menus
automatically apply in the other.
Depth of Field
To soften backgrounds, set aperture as wide as possible. Aperture can be
adjusted directly in modes A (aperture-priority AE) and M (manual).
4
Movie Recording and Playback
51
Viewing Movies
View movies on the camera.
In full-frame playback, movies are identified by a W icon. Press the focus stick (focus lever) down to start movie playback.
PLAY
The following operations can be performed while a movie is displayed:
4
Movie Recording and Playback
Focus stick
Full-frame
Playback in progress
Playback paused
(focus lever)
playback
(x)
(y)
Up
—
End playback
Down
Start playback
Pause playback
Start/resume playback
Left/right View other pictures
Adjust speed Single frame rewind/advance
Progress is shown in the display during
playback.
29m59s
STOP
PAUSE
O • Do not cover the speaker during playback.
• Sound is not played back if OFF is selected for D USER SETTING >
SOUND & FLASH.
N • Press MENU/OK to pause playback and display volume controls. Press
the focus stick (focus lever) up or down to adjust the volume; press
MENU/OK again to resume playback. Volume can also be adjusted using D SOUND SET-UP > PLAYBACK VOLUME.
• Audio can be played back over headphones or other devices connected via USB using the supplied headphone adapter.
52
Viewing Movies
Playback Speed
Press the focus stick (focus lever) left or right to
adjust playback speed during playback. Speed
is shown by the number of arrows (M or N).
29m59s
Arrows
4
Movie Recording and Playback
53
MEMO
54
Taking Photographs
55
P, S, A, and M Modes
P, S, A, and M modes give you varying degrees of control
over shutter speed and aperture.
Mode P: Program AE
Let the camera choose shutter speed and aperture for optimal
exposure. Other values that produce the same exposure can be
selected with program shift.
The camera functions in mode P (program AE) when the shutter
speed dial is rotated to A or P. Aperture is set as follows.
Aperture
Taking Photographs
Shutter speed dial
5
The camera functions in mode P regardless of the
option selected for aperture (P 42).
P (P
(P 57)
• Lenses with aperture rings: Mode P can be selected by
rotating the ring to A (auto).
• Lenses without aperture rings: Mode P can be selected
A (P
(P 57)
by pressing the center of the front command dial to
cycle to APERTURE and then rotating the dial to
choose A (auto).
O • The method for adjusting aperture when using a lens without an
aperture ring can be chosen using D BUTTON/DIAL SETTING >
APERTURE SETTING (P 230).
• Front command dial settings can be adjusted using D BUTTON/
DIAL SETTING > COMMAND DIAL SETTING (P 67, 226).
56
P, S, A, and M Modes
Shutter Speed Dial: P
Shutter speed
Setting
P (program)
Confirm that P appears in the display.
Shutter Speed Dial: A
5
Taking Photographs
A Shutter speed
B Aperture
Setting
A (auto)
A (auto)
Confirm that P appears in the display.
O If the subject is outside the metering range of the camera, the shutter
speed and aperture displays will show “– – –”.
57
Program Shift
Rotate the front command dial to choose the
desired combination of shutter speed and aperture (program shift).
Aperture
Shutter speed
O Program shift is not available in any of the following circumstances:
• With flash units that support TTL auto
• When an auto option is selected for H IMAGE QUALITY SETTING >
DYNAMIC RANGE
• In movie mode
N • To cancel program shift, turn the camera off.
• Front command dial settings can be adjusted using D BUTTON/
DIAL SETTING > COMMAND DIAL SETTING (P 67, 226).
5
Taking Photographs
58
P, S, A, and M Modes
Mode S: Shutter-Priority AE
Choose a shutter speed and let the camera adjust aperture for
optimal exposure.
A Shutter speed
B Aperture
Setting
User-selected
A (auto)
Confirm that S appears in the display.
O • If the correct exposure cannot be achieved at the selected shutter
N • Shutter speed can also be adjusted in increments of 1⁄3 EV by rotating
the front command dial.
• For faster shutter speeds, enable the electronic shutter, set the shutter speed dial to 4000 or T, and rotate the front command dial.
• If you are using a lens with an aperture ring, rotate the ring to A (auto).
If you are using a lens without an aperture ring, first select AUTO or
AUTO + MANUAL for D BUTTON/DIAL SETTING > APERTURE
SETTING, then press the center of the front command dial to cycle
to APERTURE and rotate the dial until the aperture value is displayed
in white.
• Front command dial settings can be adjusted using D BUTTON/
DIAL SETTING > COMMAND DIAL SETTING (P 67, 226).
• Shutter speed can be adjusted while the shutter button is pressed
halfway.
59
5
Taking Photographs
speed, aperture will be displayed in red.
• If the subject is outside the metering range of the camera, the aperture display will show “– – –”.
Time (T)
Choose a shutter speed of T (time) for long time-exposures.
Use of a tripod is recommended to prevent the camera moving
during the exposure.
1
Set shutter speed to T.
2
Rotate the front command dial to
choose a shutter speed.
3
Press the shutter button all the way down to take a picture
at the selected shutter speed. At speeds of 1 s or slower, a
count-down timer will be displayed while the exposure is in
progress.
5
Taking Photographs
N • To reduce “noise” (mottling) in long time-exposures, select ON for
H IMAGE QUALITY SETTING > LONG EXPOSURE NR. Note that
this may increase the time needed to record images after shooting.
• Front command dial settings can be adjusted using D BUTTON/
DIAL SETTING > COMMAND DIAL SETTING (P 67, 226).
60
P, S, A, and M Modes
Bulb (B)
Choose a shutter speed of B (bulb) for long time-exposures in
which you open and close the shutter manually. Use of a tripod
is recommended to prevent the camera moving during the exposure.
1
Set shutter speed to B.
2
Press the shutter button all the way down. The shutter will
remain open for up to 60 minutes while the shutter button
is pressed; the display shows the time elapsed since the exposure started.
H IMAGE QUALITY SETTING > LONG EXPOSURE NR. Note that
this may increase the time needed to record images after shooting.
61
5
Taking Photographs
N • Selecting an aperture of A fixes shutter speed at 30 s.
• To reduce “noise” (mottling) in long time-exposures, select ON for
Using a Remote Release
A remote release can be used for long time-exposures. When using an optional RR-100 remote release or an electronic release from
third-party suppliers, connect it to the camera’s
microphone/remote release connector via a
third-party adapter that converts the female
three-pin, ⌀2.5 mm connector to a male threepin, ⌀3.5 mm connector.
NA
confirmation dialog will be displayed
when a remote release is connected; press
MENU/OK and select n REMOTE for MIC/
REMOTE RELEASE.
5
Taking Photographs
62
CHECK MIC/REMOTE RELEASE
SETTING
SET
SKIP
P, S, A, and M Modes
Mode A: Aperture-Priority AE
Choose an aperture and let the camera adjust shutter speed for
optimal exposure.
A Shutter speed
B Aperture
Setting
A (auto)
User-selected
Confirm that A appears in the display.
O • If the correct exposure cannot be achieved at the selected aperture,
5
N • If the lens is equipped with a aperture ring, aperture can be adjusted
Taking Photographs
shutter speed will be displayed in red.
• If the subject is outside the metering range of the camera, the shutter
speed display will show “– – –”.
by rotating the ring. If you are using a lens without an aperture ring,
press the center of the front command dial to cycle to APERTURE
and then rotate the dial to choose a value.
• Front command dial settings can be adjusted using D BUTTON/
DIAL SETTING > COMMAND DIAL SETTING (P 67, 226).
• Aperture can be adjusted even while the shutter button is pressed
halfway.
63
Lenses Without Aperture Rings
Users of lenses with no aperture ring can rotate the command dial past
minimum aperture to select A (auto), then press the center of the dial to
cycle to S.S. (PROGRAM SHIFT) and use program shift to choose other
combinations of shutter speed and aperture that will produce the same
exposure.
Previewing Depth of Field
When PREVIEW DEPTH OF FIELD is assigned
to a function button, pressing the button displays a L icon and stops aperture down to the
selected setting, allowing depth of field to be
previewed in the display (P 253).
5
Taking Photographs
64
P, S, A, and M Modes
Mode M: Manual Exposure
In manual mode, the user controls both shutter speed and aperture.
Shots can be deliberately overexposed (brighter) or underexposed
(darker), opening the door for a variety of individual creative expression. The amount the picture would be under- or over-exposed
at current settings is shown by the exposure indicator; adjust shutter speed and aperture until the desired exposure is reached.
A Shutter speed
B Aperture
Setting
User-selected
User-selected
5
N • If the lens is equipped with a aperture ring, aperture can be adjusted
by rotating the ring. If you are using a lens without an aperture ring,
press the center of the front command dial to cycle to APERTURE
and then rotate the dial to choose a value.
• When set to S.S. (PROGRAM SHIFT), the front command dial can be
rotated to adjust shutter speed in increments of 1⁄3 EV.
• Front command dial settings can be adjusted using D BUTTON/
DIAL SETTING > COMMAND DIAL SETTING (P 67, 226).
65
Taking Photographs
Confirm that M appears in the display.
Exposure Preview
To preview exposure in the LCD monitor, select PREVIEW EXP./WB for
D SCREEN SET-UP > PREVIEW EXP./WB IN MANUAL MODE.
N Select an option other than PREVIEW EXP./WB when using the flash
or on other occasions on which exposure may change when the picture is taken.
5
Taking Photographs
66
P, S, A, and M Modes
Front Command Dial Roles by Mode
The roles that can be performed by the
front command dial in each mode are
listed below.
The roles assigned to the front command dial during shooting
can be chosen using D BUTTON/DIAL SETTING > COMMAND
DIAL SETTING (P 226). At default settings, the dial can be used
in the following three roles:
• FRONT COMMAND DIAL 1: S.S. (PROGRAM SHIFT) ( )
• FRONT COMMAND DIAL 2: APERTURE ( )
• FRONT COMMAND DIAL 3: EXPOSURE COMPENSATION ( )
Press the center of the front command dial to cycle through roles
1, 2, and 3.
Role assigned to front command dial
S (SHUTTER
PRIORITY AE)
A (APERTURE
PRIORITY AE)
M (MANUAL)
Program shift
Program shift 
Aperture  
Shutter speed
Aperture 
None
None
Shutter speed
Aperture 
Exposure
compensation 
None
1 Shutter speed dial set to P.
2 Shutter speed dial set to A.
3 Lens with no aperture ring, or lens equipped with an aperture ring set to
A (auto) with COMMAND selected for D BUTTON/DIAL SETTING >
APERTURE RING SETTING (A). Aperture adjustment via front command dial
not otherwise available.
4 Exposure compensation dial rotated to C.
N To adjust sensitivity using the front command dial, assign ISO to any
of the front command dial roles 1 through 3 using D BUTTON/DIAL
SETTING > COMMAND DIAL SETTING (P 226).
67
Taking Photographs
P (PROGRAM AE)
5
Autofocus
Take pictures using autofocus.
1
Use G AF/MF SETTING > FOCUS MODE to choose SINGLE
AF or CONTINUOUS AF (P 69).
2
Use G AF/MF SETTING > AF MODE to choose an AF mode
(P 71).
3
Select G AF/MF SETTING > FOCUS AREA and choose the
position and size of the focus frame (P 73).
4
Take pictures.
5
Taking Photographs
68
Autofocus
Focus Mode
Choose how the camera focuses.
1
2
Press MENU/OK to display the menus.
3
Choose from the following options:
Select G AF/MF SETTING > FOCUS MODE in the shooting
menu.
Mode
Description
Focus manually using the lens focus ring. Choose for manp
ual control of focus or in situations in which the camera is
MANUAL FOCUS unable to focus using autofocus (P 77).
Focus is continually adjusted to reflect changes in the disk
tance to the subject while the shutter button is pressed
CONTINUOUS AF halfway. Use for subjects that are in motion.
l
SINGLE AF
Focus locks while the shutter button is pressed halfway.
Choose for stationary subjects.
the lens is in manual focus mode.
• If ON is selected for G AF/MF SETTING > PRE-AF, focus will be ad-
justed continuously in modes l and k even when the shutter button is not pressed.
69
Taking Photographs
N • Regardless of the option selected, manual focus will be used when
5
The Focus Indicator
Focus status is shown by the focus indicator.
Focus indicator
Focus status
( )
Camera focusing.
Subject in focus; focus locked (focus
z (lights green)
mode l).
Subject in focus (focus mode k).
(z) (lights green) Focus is automatically adjusted for Focus indicator
changes in distance to subject.
A (blinks white) Camera unable to focus.
j
Manual focus (focus mode p).
5
Taking Photographs
70
Autofocus
Autofocus Options (AF Mode)
Choose how the camera focuses in modes l and k.
1
2
3
Press MENU/OK and go to the shooting menu.
Select G AF/MF SETTING > AF MODE.
Choose an AF mode.
How the camera focuses depends on the focus mode.
Focus Mode l (SINGLE AF)
Option
Description
Sample image
Camera focuses on subject in
selected focus point. Use for pinSINGLE POINT point focus on selected subject.
r
z
WIDE
j
ALL
Taking Photographs
y
ZONE
5
Camera focuses on subject in selected focus zone. Focus zones include multiple focus points, making it easier to focus on subjects in
motion.
Camera focuses automatically on
high-contrast subjects; display
shows areas in focus.
Rotate the front command dial in the focus-point selection display (P 74, 75) to cycle through AF modes in the following
order: r SINGLE POINT, y ZONE, and z WIDE.
71
Focus Mode k (CONTINUOUS AF)
Option
Description
Sample image
Focus tracks subject at selected focus point. Use for subjects moving
SINGLE POINT toward or away from camera.
r
y
ZONE
z
TRACKING
5
Taking Photographs
j
ALL
72
Focus tracks subject in selected focus zone. Use for subjects that are
moving fairly predictably.
Focus tracks subjects moving
through wide area of frame.
Rotate the front command dial in the focus-point selection display (P 74, 75) to cycle through AF modes in the following
order: r SINGLE POINT, y ZONE, and z TRACKING.
Autofocus
Focus-Point Selection
Choose a focus point for autofocus.
Viewing the Focus-Point Display
1 Press MENU/OK and go to the shooting menu.
2
Select G AF/MF SETTING > FOCUS AREA to view the focus-point display.
3
Use the focus stick (focus lever) and front command dial to
choose a focus area.
N The focus point can also be selected using touch controls (P 21).
5
Taking Photographs
73
Selecting a Focus Point
Use the focus stick (focus lever) to choose
the focus point and the front command
dial to choose the size of the focus frame.
The procedure varies with the option selected for AF mode.
Front command
dial
Focus stick
5
DISP/BACK
button
AF mode
Taking Photographs
Tilt
r
y
Rotate
Choose from 6
frame sizes
Highlight focus Select highlighted Choose from 3
point
focus point
frame sizes
z
N • Manual
Press
Press
Select center
focus point
—
focus-point selection is not available when z WIDE/
TRACKING is selected in focus mode l.
• If j ALL is selected for AF mode, you can rotate the front command
dial in the focus-point selection display to cycle through AF modes
in the following order: r SINGLE POINT (6 frame sizes), y ZONE
(3 frame sizes), and either z WIDE (focus mode l) or z TRACKING
(focus mode k).
74
Autofocus
The Focus-Point Display
The focus-point display varies with the option selected for AF
mode.
N Focus frames are shown by small squares (), focus zones by the large
squares.
r SINGLE POINT
AF mode
y ZONE
z TRACKING
75
5
Taking Photographs
Number of points avail- Choose from zones with Position focus frame over
able can be selected using 7 × 7, 5 × 5, or 3 × 3 focus subject you want to track.
G AF/MF SETTING > points.
NUMBER OF FOCUS
POINTS.
Autofocus
Autofocus
Although the camera boasts a high-precision autofocus system, it may be
unable to focus on the subjects listed below.
• Very shiny subjects such as mirrors or car bodies.
• Subjects photographed through a window or other reflective object.
• Dark subjects and subjects that absorb rather than reflect light, such as
hair or fur.
• Insubstantial subjects, such as smoke or flame.
• Subjects that show little contrast with the background.
• Subjects positioned in front of or behind a high-contrast object that is
also in the focus frame (for example, a subject photographed against a
backdrop of highly contrasting elements).
Checking Focus
To zoom the current focus area in by a factor of
6 for precise focus, press the center of the focus
stick (focus lever). Press again to cancel zoom.
5
Taking Photographs
Normal display
Focus zoom
N • In focus mode l, select SINGLE POINT for AF MODE.
• Focus zoom is not available in focus mode k or when G AF/MF
SETTING > PRE-AF is on.
D BUTTON/DIAL SETTING > FOCUS LEVER SETTING to
change the function performed by the center of the focus stick (focus
lever). D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING can
also be used to assign focus zoom to other controls (P 253).
• Use
76
Manual Focus
Adjust focus manually.
1
Select MANUAL FOCUS for G AF/MF
SETTING > FOCUS MODE.
2
Focus manually using the lens focus
ring. Rotate the ring left to reduce
the focus distance, right to increase.
A
3
Take pictures.
N • Use D BUTTON/DIAL SETTING > FOCUS RING to reverse the directhe lens is in manual focus mode.
77
Taking Photographs
tion of rotation of the focus ring.
• Regardless of the option selected, manual focus will be used when
5
Checking Focus
A variety of options are available for checking focus in manual
focus mode.
The Manual Focus Indicator
The white line indicates the distance to the subject in the focus area (in meters or feet according to the option selected for
D SCREEN SET-UP > FOCUS SCALE UNITS in the setup menu),
the blue bar the depth of field, or in other words the distance in
front of and behind the subject that appears to be in focus.
Focus distance
(white line)
Depth of field
5
Taking Photographs
N If both AF DISTANCE INDICATOR and MF DISTANCE INDICATOR are se-
lected in the D SCREEN SET-UP > DISP. CUSTOM SETTING list, the manual
focus indicator can also be viewed using the depth-of-field indicator in the
standard display. Use the DISP/BACK button to display standard indicators.
Focus Zoom
If ON is selected for G AF/MF SETTING > FOCUS CHECK, the camera
will automatically zoom in on the selected focus area when the focus
ring is rotated. Press the center of the focus stick (focus lever) to exit
zoom (P 73).
N The focus stick can be used to choose the focus area while focus zoom
is in effect.
78
Manual Focus
MF Assist
Use G AF/MF SETTING > MF ASSIST to choose a focus check option.
The following options are available:
• DIGITAL SPLIT IMAGE: Displays a split image
in the center of the frame. Frame the
subject in the split-image area and rotate the focus ring until the four parts
of the split image are correctly aligned.
• DIGITAL MICROPRISM: A grid pattern that
emphasizes blur is displayed when the
subject is out of focus, disappearing to
be replaced by a sharp image when the
subject is in focus.
• FOCUS PEAK HIGHLIGHT: Highlights high-con-
trast outlines. Rotate the focus ring until
the subject is highlighted.
5
Taking Photographs
79
Exposure Compensation
Adjust exposure.
Rotate the exposure compensation dial.
O • The amount of compensation available varies with the shooting mode.
• Exposure compensation can be previewed in the shooting display,
although the display may not accurately reflect its effects if:
- the exposure compensation amount exceeds ±3 EV,
- W 200% or X 400% is selected for DYNAMIC RANGE, or
- STRONG or WEAK is selected for D RANGE PRIORITY.
Exposure compensation can still be previewed in the viewfinder or LCD
monitor by pressing the shutter button halfway. In movie mode, the
display may not accurately reflect the effects of exposure compensation during F-log recording or when W 200% or X 400% is selected
for DYNAMIC RANGE. An accurate preview can be obtained by selecting mode M and adjusting exposure directly.
5
Taking Photographs
80
Exposure Compensation
C (Custom)
When the exposure compensation dial
is set to C, exposure compensation can
be adjusted by first pressing the center
of the front command dial to cycle to
EXPOSURE COMPENSATION and then
rotating the dial.
N • The front command dial can be used to set exposure compensation
to values between −5 and +5 EV.
• Front command dial settings can be adjusted using D BUTTON/
DIAL SETTING > COMMAND DIAL SETTING (P 67, 226).
5
Taking Photographs
81
Sensitivity
Adjust the camera’s sensitivity to light.
Set sensitivity using A SHOOTING SETTING > ISO.
Option
Description
Sensitivity is automatically adjusted in response to shooting
AUTO1
conditions. Different values for DEFAULT SENSITIVITY, MAX.
AUTO2
SENSITIVITY, and MIN. SHUTTER SPEED can be chosen for
AUTO3
each of AUTO1, AUTO2, and AUTO3 (P 83).
160–12800 Adjust sensitivity manually. Selected value is shown in display.
L (80)
L (100)
Choose for special situations. Note that mottling may appear in
L (125)
pictures taken at H, while L reduces dynamic range.
H (25600)
H (51200)
5
N • Sensitivity is not reset when the camera is turned off.
• A B MOVIE SETTING > F ISO option is available in the movie
Taking Photographs
shooting menu when F (movie) is selected for drive mode.
can be assigned to the front command dial using
D BUTTON/DIAL SETTING > COMMAND DIAL SETTING (P 226).
• Sensitivity
Adjusting Sensitivity
High values can be used to reduce blur when lighting is poor, while lower
values allow slower shutter speeds or wider apertures in bright light; note,
however, that mottling may appear in pictures taken at high sensitivities.
82
Sensitivity
Auto Sensitivity (A)
Choose the base sensitivity, maximum sensitivity, and minimum
shutter speed for AUTO1, AUTO2, and AUTO3.
Item
DEFAULT SENSITIVITY
MAX. SENSITIVITY
MIN. SHUTTER SPEED
Options
160–12800
400–12800
⁄–¼ SEC, AUTO
AUTO1
800
Default
AUTO2
160
3200
AUTO
AUTO3
12800
The camera automatically chooses a sensitivity between the default and maximum values; sensitivity is only raised above the
default value if the shutter speed required for optimal exposure
would be slower than the value selected for MIN. SHUTTER SPEED.
N • If the value selected for DEFAULT SENSITIVITY is higher than that
83
5
Taking Photographs
selected for MAX. SENSITIVITY, DEFAULT SENSITIVITY will be set to
the value selected for MAX. SENSITIVITY.
• The camera may select shutter speeds slower than MIN. SHUTTER
SPEED if pictures would still be underexposed at the value selected
for MAX. SENSITIVITY.
• If AUTO is selected for MIN. SHUTTER SPEED, the camera will automatically choose a minimum shutter speed fast enough to prevent
blur caused by camera shake or subject motion (the minimum shutter
speed is not affected by the option selected for image stabilization).
Metering
Choose how the camera meters exposure.
A SHOOTING SETTING > PHOTOMETRY offers a choice of the
following metering options:
O The selected option will only take effect when G AF/MF SETTING >
FACE/EYE DETECTION SETTING is OFF.
Mode
o
MULTI
p
CENTER
WEIGHTED
v
5
Taking Photographs
SPOT
w
AVERAGE
Description
The camera instantly determines exposure based on an analysis of composition, color, and brightness distribution. Recommended in most situations.
The camera meters the entire frame but assigns the greatest
weight to the area at the center.
The camera meters lighting conditions in an area equivalent
to 2% of the frame. Recommended with backlit subjects and
in other cases in which the background is much brighter or
darker than the main subject.
Exposure is set to the average for the entire frame. Provides
consistent exposure across multiple shots with the same lighting, and is particularly effective for landscapes and portraits of
subjects dressed in black or white.
N To meter the subject in the selected focus area, choose ON for G AF/
MF SETTING > INTERLOCK SPOT AE & FOCUS AREA (P 136).
84
Focus/Exposure Lock
Focus and exposure lock when the shutter button is pressed
halfway.
1
Position the subject in the focus
frame and press the shutter button
halfway to lock focus and exposure.
Focus and exposure will remain
locked while the shutter button is
pressed halfway (AF/AE lock).
2
Press the button all the way down.
N Focus
and exposure lock via the shutter button is only available
when ON is selected for D BUTTON/DIAL SETTING > SHUTTER AF,
SHUTTER AE.
5
Taking Photographs
85
Focus/Exposure Lock
Other Controls
Pressing the AEL/AFL button locks both focus and exposure.
• While the assigned control is pressed,
pressing the shutter button halfway will
not end the lock.
• If AE&AF ON/OFF SWITCH is selected
for D BUTTON/DIAL SETTING > AE/
AF-LOCK MODE, the lock can only be
ended by pressing the control a second
time.
AEL/AFL button
(AE/AF lock)
N • The focus lever (focus stick) can be used to reposition the focus point
during exposure lock.
• The AEL/AFL button can be assigned other roles using D BUTTON/
DIAL SETTING > FUNCTION (Fn) SETTING. Exposure and focus lock
can also be assigned to other function buttons (P 253).
• Exposure and focus lock can be performed separately by assigning
them to different function buttons.
5
Taking Photographs
86
Bracketing
Automatically vary settings over a series of pictures.
1
Press the DRIVE/DELETE button and select the desired bracketing option in
the drive-mode menu.
2
Press the focus stick (focus lever) up or down to highlight one
of the following:
Option
W ISO BKT
V WHITE BALANCE BKT
P
88
88
Option
s Bracketing
P
89
Press the focus stick left or right to highlight the desired
bracketing settings.
4
5
Press MENU/OK to select.
5
Taking Photographs
3
Take pictures.
87
W ISO BKT
Select a bracketing amount (±1⁄3, ±2⁄3, or ±1) in the drive mode
display. Each time the shutter is released, the camera will take
a picture at the current sensitivity and process it to create two
additional copies, one with sensitivity raised and the other with
sensitivity lowered by the selected amount.
V WHITE BALANCE BKT
Select a bracketing amount (±1, ±2, or ±3) in the drive mode display. Each time the shutter is released, the camera takes one shot
and processes it to create three copies: one at the current white
balanced setting, one with fine-tuning increased by the selected
amount, and another with fine-tuning decreased by the selected
amount.
5
Taking Photographs
88
Bracketing
s Bracketing
O AE BKT
Use A SHOOTING SETTING > AE BKT SETTING to choose the
bracketing amount, bracketing order, and number of shots. The
camera will take the specified number of shots in sequence: one
using the metered value for exposure and the others over- or under-exposed by multiples of the selected bracketing amount.
N Regardless of the bracketing amount, exposure will not exceed the
limits of the exposure metering system.
X FILM SIMULATION BKT
Each time the shutter is released, the camera takes one shot and
processes it to create copies with different film simulation settings,
chosen using A SHOOTING SETTING > FILM SIMULATION BKT.
5
N While dynamic range bracketing is in effect, sensitivity will be restrict-
ed to a minimum of ISO 640; the sensitivity previously in effect is restored when bracketing ends.
89
Taking Photographs
Y DYNAMIC RANGE BKT
Each time the shutter button is pressed, the camera takes three
shots with different dynamic ranges: 100% for the first, 200% for
the second, and 400% for the third.
Z FOCUS BKT
Each time the shutter button is pressed, the camera takes a series of photos, varying focus with each shot. The A SHOOTING
SETTING > FOCUS BKT SETTING item offers a choice of MANUAL
and AUTO bracketing.
N • Do not adjust zoom during shooting.
• Use of a tripod is recommended.
MANUAL
In MANUAL mode, you choose the following.
Option
FRAMES
STEP
INTERVAL
5
Description
Choose the number of shots.
Choose the amount focus changes with each shot.
Choose the interval between shots.
Taking Photographs
Focus and FRAMES/STEP
The relation between focus and the options chosen for FRAMES and
STEP is shown in the illustration.
Step
Frames
1
2
3
4
5
Starting focus position
• Focus proceeds from the starting position toward infinity.
• Small STEP values translate to small changes in focus, larger values to larger
changes.
• Regardless of the option chosen for FRAMES, shooting ends when focus
reaches infinity.
90
Bracketing
AUTO
In AUTO mode, the camera calculates FRAMES and STEP automatically.
1
Select A SHOOTING SETTING in the shooting menu, highlight FOCUS BKT SETTING, and press MENU/OK.
2
Select AUTO and choose an INTERVAL.
The view through the lens will be displayed.
3
Focus on the nearest end of the subject and press MENU/OK.
The selected focus distance appears
as A on the focus distance indicator.
FOCUS BKT SETTING
SET POINT A
CONTROL THE FOCUS RING
SET POINT B
SET
N The same focus range can be chosen by focusing on the farthest
end of the subject first.
5
FOCUS BKT SETTING
SET POINT B
CONTROL THE FOCUS RING
SET POINT A
SET
N Instead of pressing the DISP/BACK button, you can press MENU/OK
and select A again.
5
Take photographs.
The camera will calculate values for
FRAMES and STEP automatically. The
number of frames will appear in the
display.
NO
91
Taking Photographs
4
Focus on the farthest end of the subject and press DISP/BACK.
The selected focus distance (B) and
focus range (A to B) appear on the
focus distance indicator.
Continuous Shooting (Burst Mode)
Capture motion in a series of pictures.
1
Press the DRIVE/DELETE button and
select CH HIGH SPEED BURST or
CL LOW SPEED BURST in the drivemode menu.
2
Choose the frame advance rate and press the shutter button
to start shooting.
Shooting ends when the shutter button is released or the
memory card is full.
O • Frame advance rates of 10 fps or faster are available only when
s ELECTRONIC SHUTTER is selected for A SHOOTING SETTING >
SHUTTER TYPE.
• If file numbering reaches 9999 before shooting is complete, the remaining pictures will be recorded to a new folder.
• Shooting ends when the memory card is full; the camera will record
all photos shot to that point. Burst shooting may not begin if the
space available on the memory card is insufficient.
• Frame rates may slow as more shots are taken.
• Frame rate varies with the scene, shutter speed, sensitivity, and focus
mode.
• Depending on shooting conditions, frame rates may slow or the flash
may not fire.
• Recording times may increase during burst shooting.
5
Taking Photographs
Focus and Exposure
• To vary focus with each shot, select CONTINUOUS AF for G AF/MF
SETTING > FOCUS MODE.
• To vary exposure with each shot, select OFF for D BUTTON/DIAL
SETTING > SHUTTER AE.
N Depending on such factors as aperture, sensitivity, and exposure compensation, exposure may not be adjusted automatically.
92
HDR
Each time the shutter button is pressed, the camera takes
three shots, varying exposure each time, and combines
them into a single picture. The resulting photograph preserves details in highlights and shadows.
1
Press the DRIVE/DELETE button and select HDR in the drive-mode menu.
2
Choose the amount the brightnesses of the exposures vary.
Option
HDR AUTO
HDR800+
3
Take photographs.
The camera will create a combined image.
93
5
Taking Photographs
HDR200
HDR400
HDR800
Description
Dynamic range is automatically set to a value of from 200%
to 800%.
Dynamic range is set to 200%.
Dynamic range is set to 400%.
Dynamic range is set to 800%.
Camera settings are adjusted for maximum variation in dynamic range.
HDR
O • Keep the camera steady.
• The desired results may not be achieved in the subject moves or the
composition or lighting changes during shooting.
• The picture will be cropped a very small amount and the resolution
will drop slightly.
• Mottling may appear in pictures taken at higher values. Choose a value according to the scene.
• “Extended” sensitivity values are not supported.
• Depending on the options selected for HDR and sensitivity, pictures
may not be taken at the selected shutter speed.
• The flash does not fire.
N HDR images are indicated by a t icon during playback.
5
Taking Photographs
94
Panoramas
Follow an on-screen guide to create a panorama.
1
Press the DRIVE/DELETE button and select Adv. > PANORAMA in the drivemode menu.
2
To select the size of the angle through which you will pan the
camera while shooting, press the focus stick (focus lever) left.
Highlight a size and press MENU/OK.
3
Press the focus stick right to view a choice of pan directions.
Highlight a pan direction and press MENU/OK.
4
Press the shutter button all the way down to start recording.
There is no need to keep the shutter button pressed during
recording.
Pan the camera in the direction
shown by the arrow. Shooting ends
automatically when the camera is
panned to the end of the guides and
the panorama is complete.
Taking Photographs
5
Sweep camera along yellow
line in direction of
ANGLE
5
DIRECTION
95
For Best Results
• Move the camera slowly in a small circle at a steady speed
• Keep the camera parallel or at right angles to the horizon and be sure to
pan only in the direction shown by the guides
• Try panning at a different speed if the desired results are not achieved
• Prop your elbows against your sides
• Use a tripod
• For best results, use a lens with a focal length of 35 mm or less (50 mm or
less in 35 mm format).
O • If the shutter button is pressed all the way down before the panorama
is complete, shooting will end and no panorama may be recorded.
• The last part of the panorama may not be recorded if shooting ends
before the panorama is complete.
• Panoramas are created from multiple frames, and the camera may in
some cases be unable to stitch the frames together perfectly.
• Panoramas may be blurred if the subject is poorly lit.
• Shooting may be interrupted if the camera is panned too quickly or
5
Taking Photographs
too slowly. Panning the camera in a direction other than that shown
cancels shooting.
• The camera may in some cases record a greater or lesser angle than
selected.
• The desired results may not be achieved with:
- Moving subjects
- Subjects close to the camera
- Unvarying subjects such as the sky or a field of grass
- Subjects that are in constant motion, such as waves and waterfalls
- Subjects that undergo marked changes in brightness
• If ON is selected for D BUTTON/DIAL SETTING > SHUTTER AE, exposure for the entire panorama is determined by the first frame.
96
Panoramas
Viewing Panoramas
With the panorama displayed full frame, press the focus stick (focus lever)
down to start panorama playback. Vertical panoramas will scroll vertically,
horizontal panoramas horizontally.
PLAY
STOP
PAUSE
• In full-frame playback, you can use the front command dial to zoom panoramas in or out.
• Panorama playback is controlled using the focus stick.
Full-frame
playback
—
Start playback
Left/right
View other pictures
Panorama
Panorama
playback
playback paused
End playback
Pause playback
Resume playback
Choose pan
Scroll panorama
direction
manually
97
5
Taking Photographs
Focus stick
(focus lever)
Up
Down
Multiple Exposures
Create a photograph that combines multiple exposures.
1
Press the DRIVE/DELETE button and select Adv. > MULTIPLE EXPOSURE in
the drive-mode menu.
2
Use A SHOOTING SETTING > MULTIPLE EXPOSURE CTRL to
choose how the exposures are combined.
5
Taking Photographs
Option
ADDITIVE
AVERAGE
BRIGHT
DARK
3
98
Description
The camera adds the exposures together. You may need to
lower exposure compensation depending on the number
of shots.
The camera automatically optimizes exposure for the final
picture. The background in series shot without changing
the composition will be optimally exposed.
The camera compares the exposures and chooses only the
brightest pixel at each location. Colors may be mixed depending on their brightness and hue.
The camera compares the exposures and chooses only the
darkest pixel at each location. Colors may be mixed depending on their brightness and hue.
Take the first shot.
Multiple Exposures
4
Press MENU/OK. The first shot will be
shown superimposed on the view
through the lens and you will be
prompted to take the second shot.
NEXT
RETRY
EXIT
N • To return to the previous step and retake the first shot, press the
focus stick (focus lever) left.
• To save the first shot and exit without creating a multiple exposure, press DISP/BACK.
5
Take the second shot, using the first
frame as a guide.
EXIT
6
Press MENU/OK.
The combined exposures will be displayed as a guide to composing the
next shot.
5
EXIT
N • To return to the previous step and retake the second shot, press
the focus stick left.
• To end shooting and create a multiple exposure from the shots
taken to this point, press DISP/BACK.
7
Make additional exposures.
Each photograph can contain up to nine exposures.
8
Press DISP/BACK to end shooting.
The camera will create the combined image and multiple exposure shooting will end.
99
Taking Photographs
RETRY
Filters
Take photos with filter effects.
1
Press the DRIVE/DELETE button and select FILTER in the drive-mode menu.
2
Choose a filter.
Filter
G TOY CAMERA
H MINIATURE
I POP COLOR
5
J HIGH-KEY
Taking Photographs
Z LOW-KEY
K DYNAMIC TONE
X SOFT FOCUS
Description
Choose for a retro toy camera effect.
The tops and bottoms of pictures are blurred
for a diorama effect.
Create high-contrast images with saturated
colors.
Create bright, low-contrast images.
Create uniformly dark tones with few areas of
emphasized highlights.
Dynamic tone expression is used for a fantasy
effect.
Create a look that is evenly soft throughout the
whole image.
u PARTIAL COLOR (RED)
v PARTIAL COLOR (ORANGE)
Areas of the image that are the selected color
w PARTIAL COLOR (YELLOW)
are recorded in that color. All other areas of the
x PARTIAL COLOR (GREEN)
image are recorded in black-and-white.
y PARTIAL COLOR (BLUE)
z PARTIAL COLOR (PURPLE)
N Depending on the subject and camera settings, images may in
some cases be grainy or vary in brightness or hue.
100
Self-Portraits (Selfies)
To shoot a self-portrait, rotate the LCD monitor as shown.
For effortless self-portraits, tilt the LCD monitor 180° so that it
triggers the eye sensor and displays a mirror image (P 8).
5
Taking Photographs
101
MEMO
102
The Shooting Menus
103
IMAGE QUALITY SETTING (Still Photography)
Adjust image quality settings for still photography.
To display image quality settings, press
MENU/OK in the photo shooting display and
select the H (IMAGE QUALITY SETTING)
tab.
IMAGE QUALITY SETTING
IMAGE SIZE
IMAGE QUALITY
RAW RECORDING
FILM SIMULATION
MONOCHROMATIC COLOR
GRAIN EFFECT
COLOR CHROME EFFECT
COLOR CHROME FX BLUE
EXIT
N
The options available vary with the shooting mode selected.
IMAGE SIZE
Choose the size and aspect ratio at which still pictures are recorded.
6
The Shooting Menus
Option
O3:2
O 16 : 9
Image size
6240 × 4160
6240 × 3512
Option
O1:1
Image size
4160 × 4160
Option
P3:2
P 16 : 9
Image size
4416 × 2944
4416 × 2488
Option
P1:1
Image size
2944 × 2944
Option
Q3:2
Q 16 : 9
Image size
3120 × 2080
3120 × 1760
Option
Q1:1
Image size
2080 × 2080
The following options are available in SPORTS FINDER MODE
(P 140) and when 1.25X CROP is selected in burst mode:
Option
P3:2
P 16 : 9
Image size
4992 × 3328
4992 × 2808
Option
P1:1
Image size
3328 × 3328
N IMAGE SIZE is not reset when the camera is turned off or another
shooting mode is selected.
104
IMAGE QUALITY SETTING (Still Photography)
IMAGE QUALITY
Choose a file format and compression ratio.
Option
FINE
Description
Low compression ratios are used for higher-quality images.
Higher compression ratios are used to increase the number of
NORMAL
images that can be stored.
Record both RAW and fine-quality JPEG images.
FINE + RAW
NORMAL + RAW Record both RAW and normal-quality JPEG images.
Record RAW images only.
RAW
The Function Buttons
To toggle RAW image quality on or off for a single shot, assign RAW to a
function button (P 253). Press the button once to select the option in
the right column, again to return to the original setting (left column).
Option selected by pressing function
button to which RAW is assigned
FINE + RAW
NORMAL + RAW
FINE
NORMAL
FINE
105
6
The Shooting Menus
Option currently selected for
IMAGE QUALITY
FINE
NORMAL
FINE + RAW
NORMAL + RAW
RAW
RAW RECORDING
Choose whether to compress RAW images.
Option
UNCOMPRESSED
Description
RAW images are not compressed.
RAW images are compressed using a reversible algorithm that reduces file size with no loss of image data.
The images can be viewed in Capture One Express
Fujifilm (P 301), RAW FILE CONVERTER EX powered by
LOSSLESS COMPRESSED SILKYPIX (P 301), FUJIFILM X RAW STUDIO (P 302),
or other software that supports “lossless” RAW compression. Quality is the same as UNCOMPRESSED, but the
resulting files are anywhere from about 30 to 90 percent
of their uncompressed size.
RAW images are compressed using a “lossy”, non-reversible
algorithm. Quality is about the same as UNCOMPRESSED,
COMPRESSED
but the resulting files are anywhere from about 25 to 35
percent of their uncompressed size.
6
The Shooting Menus
FILM SIMULATION
Simulate the effects of different kinds of film, including blackand-white (with or without color filters). Choose a palette according to your subject and creative intent.
Option
Description
c PROVIA/STANDARD
Ideal for a wide range of subjects.
d Velvia/VIVID
Vibrant reproduction, ideal for landscape and nature.
e ASTIA/SOFT
Softer color and contrast for a more subdued look.
i CLASSIC CHROME
Soft color and enhanced shadow contrast for a calm look.
106
IMAGE QUALITY SETTING (Still Photography)
Option
Description
Ideal for portrait with slightly enhanced contrast.
h PRO Neg. Std
Ideal for portrait with soft gradations and skin tones.
g CLASSIC Neg.
Enhanced color with hard tonality to increase image
depth.
Soft color and rich shadow tone suitable for film look
movie.
Unique color with low saturation and high contrast. Suitable for still and movie.
Shoot in Black and White In rich details with sharpness.
Available with yellow (Ye), red (R), and green (G) filters,
which deepen shades of gray corresponding to hues
complementary to the selected color.
• d ACROS+Ye FILTER: Slightly enhances contrast and
darkens skies.
• c ACROS+R FILTER: Enhances contrast and darkens skies
considerably.
• b ACROS+G FILTER: Produces pleasing skin tones in portrait.
Shoots in black and white. Available with yellow (Ye), red
(R), and green (G) filters, which deepen shades of gray corresponding to hues complementary to the selected color.
• e MONOCHROME+Ye FILTER: Slightly enhances contrast
and darkens skies.
• d MONOCHROME+R FILTER: Enhances contrast and darkens skies considerably.
• f MONOCHROME+G FILTER: Produces pleasing skin tones
in portrait.
Shoots in sepia tone.
X ETERNA/CINEMA
N ETERNA
BLEACH BYPASS
a ACROS
b MONOCHROME
f SEPIA
N • Film simulation options can be combined with tone and sharpness
settings.
• Film simulation settings can also be accessed via shortcuts (P 244).
• For more information, visit:
https://fujifilm-x.com/global/tag/the-world-of-film-simulation/?post_type=xstories
107
6
The Shooting Menus
g PRO Neg. Hi
MONOCHROMATIC COLOR
Add a reddish or bluish tinge (warm or
cool color cast) to the a ACROS and
b MONOCHROME monochrome film
simulations. Color can be adjusted on the
WARM–COOL and G (Green)–M (Magenta)
axes.
MONOCHROMATIC COLOR
SET
GRAIN EFFECT
Add a film grain effect.
ROUGHNESS
Option
STRONG
WEAK
OFF
Description
Choose for rougher grains.
Choose for smoother grains.
Turn the effect off.
SIZE
6
The Shooting Menus
Option
LARGE
SMALL
Description
Choose for coarser grains.
Choose for finer grains.
COLOR CHROME EFFECT
Increase the range of tones available for rendering colors that
tend to be highly saturated, such as reds, yellows, and greens.
Option
STRONG
WEAK
OFF
108
Description
Choose for a strong effect.
Choose for a weak effect.
Turn the effect off.
IMAGE QUALITY SETTING (Still Photography)
COLOR CHROME FX BLUE
Increase the range of tones available for rendering blues.
Option
STRONG
WEAK
OFF
Description
Choose for a strong effect.
Choose for a weak effect.
Turn the effect off.
WHITE BALANCE
For natural colors, choose a white balance option that matches
the light source.
Description
White balance is adjusted automatically. Choose for whiter
whites in scenes lit by incandescent bulbs.
White balance is adjusted automatically.
White balance is adjusted automatically. Choose for warmer
whites in scenes lit by incandescent bulbs.
Measure a value for white balance.
6
Choose a color temperature.
The Shooting Menus
Option
WA WHITE
PRIORITY
AUTO
AA AMBIENCE
PRIORITY
k CUSTOM 1
l CUSTOM 2
m CUSTOM 3
k COLOR
TEMPERATURE
i DAYLIGHT
j SHADE
k FLUORESCENT
LIGHT-1
l FLUORESCENT
LIGHT-2
m FLUORESCENT
LIGHT-3
n INCANDESCENT
For subjects in direct sunlight.
For subjects in the shade.
Use under “daylight” fluorescent lights.
Use under “warm white” fluorescent lights.
Use under “cool white” fluorescent lights.
Use under incandescent lighting.
Reduces the blue cast typically associated with underwater
g UNDERWATER
lighting.
109
N • In conditions in which AUTO fails to produce the desired results—for
example, under certain types of lighting or in close-ups of portrait
subjects—use custom white balance or choose a white balance option suited to the light source.
• White balance is adjusted for flash lighting only in AUTO, WA WHITE
PRIORITY, AA AMBIENCE PRIORITY, and g modes. Turn the
flash off using other white balance options.
• White balance options can also be accessed via shortcuts (P 244).
Fine-Tuning White Balance
Pressing MENU/OK after selecting a white
balance option displays a fine-tuning
dialog; use the focus stick (focus lever) to
fine-tune white balance.
WB SHIFT
SET
N • To exit without fine-tuning white balance, press DISP/BACK after selecting a white balance option.
6
• You cannot tilt the focus stick diagonally when fine-tuning white balance.
The Shooting Menus
110
IMAGE QUALITY SETTING (Still Photography)
Custom White Balance
Choose k, l, or m to adjust white
CUSTOM 1
balance for unusual lighting conditions
using a white object as a reference (colored objects can also be used to lend
photos a color cast). A white balance tarSHUTTER : NEW WB
SHIFT
NOT CHANGE
get will be displayed; position and size
the target so that it is filled by the reference object and press the
shutter button all the way down to measure white balance (to
select the most recent custom value and exit without measuring
white balance, press DISP/BACK, or press MENU/OK to select the most
recent value and display the fine-tuning dialog).
• If “COMPLETED !” is displayed, press MENU/OK
COMPLETED !
to set white balance to the measured
value.
• If “UNDER” is displayed, raise exposure
compensation and try again.
SET
CANCEL
• If “OVER” is displayed, lower exposure compensation and try again.
6
The Shooting Menus
111
k: Color Temperature
Adjust white balance to match the color temperature of the light
source.
N Color temperature can be adjusted to make pictures “warmer” or “colder” or deliberately produce colors that differ radically from those in real
life.
1
Select k in the white balance menu.
The option currently selected for color temperature will be displayed.
WHITE BALANCE
COLOR TEMPERATURE
R:0 B:0
SET
2
6
Edit the color temperature using the
focus stick (focus lever) and press
MENU/OK.
A fine-tuning dialog will be displayed.
SHIFT
COLOR TEMPERATURE
SET
SHIFT
The Shooting Menus
N • You can also adjust color temperature in increments of 10 K by
rotating the front command dial.
• Choose from values of from 2500 to 10000 K.
• To exit without fine-tuning white balance, press DISP/BACK after
choosing a color temperature.
3
4
Highlight a fine-tuning amount using the focus stick.
Press MENU/OK.
The changes will be applied. The selected color temperature will appear
in the display.
112
IMAGE QUALITY SETTING (Still Photography)
Color Temperature
Color temperature is an objective measure of the color of a light source, expressed in Kelvin (K). Light sources with a color temperature close to that of
direct sunlight appear white; light sources with a lower color temperature
have a yellow or red cast, while those with a higher color temperature are
tinged with blue.
DYNAMIC RANGE
Adjust dynamic range. Wide dynamic ranges reduce loss of detail in highlights for more natural results with high-contrast or
backlit scenes.
Option
Description
V 100% Choose for increased contrast.
AUTO
W 200%
Reduce loss of detail in highlights.
X 400%
O Mottling may appear in pictures taken at higher values. Choose a value according to the scene.
N • If AUTO is selected, the camera will automatically choose either
113
6
The Shooting Menus
V 100% or W 200% according to the subject and shooting conditions. Shutter speed and aperture will be displayed when the shutter button is pressed halfway.
• W 200% is available at sensitivities of from ISO 320 to ISO 12800,
X 400% at sensitivities of from ISO 640 to 12800.
D RANGE PRIORITY
Reduce loss of detail in highlights and shadows for natural-looking results when photographing high-contrast scenes.
Option
AUTO
STRONG
WEAK
OFF
Description
Contrast is adjusted automatically in response to lighting conditions.
Adjust dynamic range by a large amount for very high-contrast
scenes.
Adjust dynamic range by a smaller amount for moderately
high-contrast scenes.
Contrast reduction off.
N • WEAK is available at sensitivities of from ISO 320 to ISO 12800,
STRONG at sensitivities of from ISO 640 to 12800.
• When an option other than OFF is selected, TONE CURVE, and
DYNAMIC RANGE will be adjusted automatically.
6
The Shooting Menus
TONE CURVE
With reference to a tone curve, adjust the
appearance of highlights or shadows,
making them harsher or softer. Choose
higher values to make shadows and
highlights harsher, lower values to make
them softer.
Option
HIGHLIGHTS
SHADOWS
114
Description
-2 to +4
-2 to +4
TONE CURVE
HIGHLIGHTS
SHADOWS
SET
CANCEL
IMAGE QUALITY SETTING (Still Photography)
COLOR
Adjust color density. Choose higher values to increase saturation,
lower values to reduce it.
−4
−3
−2
−1
Options
0
+1
+2
+3
+4
SHARPNESS
Sharpen or soften outlines. Choose higher values for sharper outlines, lower values for softer outlines.
−4
−3
−2
−1
Options
0
+1
+2
+3
+4
HIGH ISO NR
Reduce noise in pictures taken at high sensitivities. Choose higher values to reduce noise and smooth outlines, lower values to
leave outlines visible.
−4
−3
−2
−1
Options
0
+1
+2
+3
+4
6
The Shooting Menus
115
CLARITY
Increase definition while altering tones in highlights and shadows as little as possible. Choose higher values for increased definition, lower values for a softer effect.
−5
−4
−3
−2
−1
Options
0
+1
+2
+3
+4
+5
O The additional processing required at settings other than 0 increases
the time need to save each shot.
LONG EXPOSURE NR
Select ON to reduce mottling in long time-exposures.
Options
ON
OFF
O The additional processing required when ON is selected increases save
times.
6
The Shooting Menus
LENS MODULATION OPTIMIZER
Select ON to improve definition by adjusting for diffraction and
the slight loss of focus at the periphery of the lens.
Options
ON
116
OFF
IMAGE QUALITY SETTING (Still Photography)
COLOR SPACE
Choose the gamut of colors available for color reproduction.
Option
sRGB
Adobe RGB
Description
Recommended in most situations.
For commercial printing.
PIXEL MAPPING
Use this option if you notice bright spots in your pictures.
1
Press MENU/OK in the shooting display and select the H IMAGE
QUALITY SETTING tab.
2
Highlight PIXEL MAPPING and press MENU/OK to perform pixel mapping.
O • Results are not guaranteed.
• Be sure the battery is fully charged before beginning pixel mapping.
• Pixel mapping is not available when the camera temperature is elevated.
• Processing may take a few seconds.
6
The Shooting Menus
117
SELECT CUSTOM SETTING
Recall settings saved to custom settings banks 1 through 7
(CUSTOM 1 through CUSTOM 7) using EDIT/SAVE CUSTOM
SETTING.
Banks
NOTHING SELECTED
CUSTOM 4
CUSTOM 1
CUSTOM 5
CUSTOM 2
CUSTOM 6
CUSTOM 3
CUSTOM 7
N If you would prefer not to recall saved settings, select NOTHING
SELECTED.
EDIT/SAVE CUSTOM SETTING
Adjust settings as desired and save them to a custom settings
bank. Saved settings can be recalled using H IMAGE QUALITY
SETTING > SELECT CUSTOM SETTING.
Saving Custom Settings
Create a new custom settings bank.
6
The Shooting Menus
1
Select H IMAGE QUALITY SETTING > EDIT/SAVE CUSTOM
SETTING in the shooting menu and press MENU/OK.
2
Highlight a destination bank for
the new settings (CREATE NEW C1
through C7) and press MENU/OK.
A confirmation dialog will be displayed.
3
Highlight OK and press MENU/OK.
Current camera settings will be saved
to the selected bank.
EDIT/SAVE CUSTOM SETTING
CREATE NEW
CREATE NEW
CREATE NEW
CREATE NEW
CREATE NEW
CREATE NEW
CREATE NEW
CREATE NEW
CUSTOM 1
CREATE NEW OK?
OK
CANCEL
118
IMAGE QUALITY SETTING (Still Photography)
Editing Custom Settings
Edit existing custom settings banks.
1
Select H IMAGE QUALITY SETTING > EDIT/SAVE CUSTOM
SETTING in the shooting menu and press MENU/OK.
2
Highlight the desired custom settings bank and press MENU/OK.
3
Highlight EDIT/CHECK and press
MENU/OK.
4
The camera will display a list of shooting menu items; highlight an item you
wish to edit and press MENU/OK.
Adjust the selected item as desired.
EDIT/SAVE CUSTOM SETTING
CUSTOM 1
CUSTOM 2
CUSTOM 3
CUSTOM 4
CREATE NEW
CREATE NEW
CREATE NEW
CUSTOM 1
EDIT/CHECK
SAVE THE CHANGES
RESET THE CHANGES
COPY
ERASE
EDIT CUSTOM NAME
CUSTOM 1 EDIT/CHECK
IMAGE SIZE
IMAGE QUALITY
RAW RECORDING
FILM SIMULATION
MONOCHROMATIC COLOR
GRAIN EFFECT
COLOR CHROME EFFECT
COLOR CHROME FX BLUE
5
EXIT
Press MENU/OK to save the changes and return to the shooting
menu list.
Adjust additional items as desired.
N If DISABLE is selected for AUTO UPDATE CUSTOM SETTING, red
dots will appear next to the edited items but the changes will not be
saved automatically.
• To save the changes for selected items, highlight the items in the
list and press Q.
• To save changes for all items, return to Step 3 and select SAVE THE
CHANGES. To cancel all changes and restore the previous settings,
select RESET THE CHANGES.
• If you copy an item marked by a red dot, the item will be copied with
the changes intact.
119
The Shooting Menus
SAVE
6
Copying Custom Settings
Copy custom settings from one bank to another, overwriting the
settings in the destination bank. If the source bank has been renamed, the name will also be copied to the destination bank.
6
The Shooting Menus
1
Select H IMAGE QUALITY SETTING > EDIT/SAVE CUSTOM
SETTING in the shooting menu and press MENU/OK.
2
Highlight the source bank and press
MENU/OK.
3
Highlight COPY and press MENU/OK.
4
Highlight the destination bank (C1
through C7) and press MENU/OK.
A confirmation dialog will be displayed.
EDIT/SAVE CUSTOM SETTING
CUSTOM 1
CUSTOM 2
CUSTOM 3
CUSTOM 4
CREATE NEW
CREATE NEW
CREATE NEW
CUSTOM 1
EDIT/CHECK
SAVE THE CHANGES
RESET THE CHANGES
COPY
ERASE
EDIT CUSTOM NAME
COPY TO
CUSTOM 1
CUSTOM 2
CUSTOM 3
CUSTOM 4
CREATE NEW
CREATE NEW
CREATE NEW
N Any changes to custom settings in the
destination bank will be overwritten.
5
Highlight OK and press MENU/OK.
The selected settings will be copied
to the destination bank, overwriting
any existing settings.
120
COPY
CUSTOM 1
CUSTOM 2
COPY OK?
OK
CANCEL
IMAGE QUALITY SETTING (Still Photography)
Deleting Custom Settings
Delete settings from selected custom settings banks.
1
Select H IMAGE QUALITY SETTING > EDIT/SAVE CUSTOM
SETTING in the shooting menu and press MENU/OK.
2
Highlight the desired custom settings bank and press MENU/OK.
3
Highlight ERASE and press MENU/OK.
A confirmation dialog will be displayed.
4
Highlight OK and press MENU/OK.
Any custom settings saved to the selected bank will be deleted.
EDIT/SAVE CUSTOM SETTING
CUSTOM 1
CUSTOM 2
CUSTOM 3
CUSTOM 4
CREATE NEW
CREATE NEW
CREATE NEW
CUSTOM 1
EDIT/CHECK
SAVE THE CHANGES
RESET THE CHANGES
COPY
ERASE
EDIT CUSTOM NAME
ERASE
CUSTOM 1
ERASE OK?
6
The Shooting Menus
OK
CANCEL
121
Renaming Custom Settings Banks
Rename selected custom settings banks.
6
1
Select H IMAGE QUALITY SETTING > EDIT/SAVE CUSTOM
SETTING in the shooting menu and press MENU/OK.
2
Highlight the desired custom settings bank and press MENU/OK.
3
Highlight EDIT CUSTOM NAME and
press MENU/OK.
4
Enter a new name for the custom settings bank and select
SET.
The selected bank will be renamed.
EDIT/SAVE CUSTOM SETTING
CUSTOM 1
CUSTOM 2
CUSTOM 3
CUSTOM 4
CREATE NEW
CREATE NEW
CREATE NEW
CUSTOM 1
EDIT/CHECK
SAVE THE CHANGES
RESET THE CHANGES
COPY
ERASE
EDIT CUSTOM NAME
The Shooting Menus
AUTO UPDATE CUSTOM SETTING
Choose whether changes to saved custom settings apply automatically.
Option
ENABLE
DISABLE
122
Description
Changes to custom settings banks CUSTOM 1 through
CUSTOM 7 apply automatically.
Changes do not apply automatically. Any changes to custom settings must be applied manually (P 119).
IMAGE QUALITY SETTING (Still Photography)
xF MOUNT ADAPTER SETTING
Adjust settings for lenses attached via a mount adapter. The
camera can store settings for multiple lenses (LENS 1 through
LENS 6).
N Any changes made using this item also apply in movie mode (P 167).
Choosing a Focal Length
Enter the lens’s true focal length.
LENS 5
INPUT FOCAL LENGTH
SET
Distortion Correction
Choose from STRONG, MEDIUM, or
WEAK options to correct BARREL or
PINCUSHION distortion.
CANCEL
LENS5 DISTORTION CORRECTION
BARREL STRONG
BARREL MEDIUM
BARREL WEAK
OFF
PINCUSHION WEAK
PINCUSHION MEDIUM
PINCUSHION STRONG
6
The Shooting Menus
Color Shading Correction
Color (shading) variations between the
center and edges of the frame can be adjusted separately for each corner.
To use color shading correction, follow the
steps below.
1
NEXT
SET
Rotate the front command dial to choose a corner. The selected corner is indicated by a triangle.
123
IMAGE QUALITY SETTING (Still Photography)
2
Use the focus stick (focus lever) to adjust shading until there is
no visible difference in color between the selected corner and
the center of the image.
• Press the focus stick left or right to adjust colors on the
cyan–red axis.
• Press the focus stick up or down to adjust colors on the
blue–yellow axis.
N To determine the amount required, adjust color shading correction
while taking photos of blue sky or a sheet of gray paper.
6
Peripheral Illumination Correction
Choose from values between –5 and
+5. Choosing positive values increases
peripheral illumination, while choosing
negative values reduces peripheral illumination. Positive values are recomSET
CANCEL
mended for vintage lenses, negative values to create the effect of images taken with an antique lens or a
pinhole camera.
The Shooting Menus
N To determine the amount required, adjust peripheral illumination correction while taking photos of blue sky or a sheet of gray paper.
EDIT LENS NAME
Change the lens name.
124
AF/MF SETTING (Still Photography)
Adjust focus settings for still photography.
To display AF/MF settings, press MENU/OK
in the photo shooting display and select
the G (AF/MF SETTING) tab.
AF/MF SETTING
FOCUS AREA
FOCUS MODE
AF MODE
AF-C CUSTOM SETTINGS
STORE AF MODE BY ORIENTATION
AF POINT DISPLAY
NUMBER OF FOCUS POINTS
PRE-AF
EXIT
N
The options available vary with the shooting mode selected.
FOCUS AREA
Choose the focus area for autofocus, manual focus, and focus
zoom (P 73).
FOCUS MODE
Choose how the camera focuses (P 69).
AF MODE
Choose how the camera focuses in modes l and k (P 71).
6
The Shooting Menus
125
AF-C CUSTOM SETTINGS
Select focus-tracking options for
CONTINUOUS AF focus mode. Choose
from Sets 1 (SET 1) through 5 (SET 5) according to your subject or select SET 6
CUSTOM for custom focus-tracking options.
Option
6
AF-C CUSTOM SETTINGS
SET 1 MULTI PURPOSE
TRACKING SENSITIVITY
SPEED TRACKING SENSITIVITY
ZONE AREA SWITCHING
AUTO
OK
The Shooting Menus
Description
A standard tracking option that works well with
SET 1 MULTI PURPOSE
the typical range of moving subjects.
The focus system attempts to track the chosen
SET 2 IGNORE OBSTACLES & subject. Choose with subjects that are hard to
CONTINUE TO TRACK SUBJECT keep in the focus area or if other objects are likely
to enter the focus area with the subject.
The focus system attempts to compensate for
SET 3 FOR ACCELERATING/
subject acceleration or deceleration. Choose for
DECELERATING SUBJECT
subjects prone to rapid changes in velocity.
The focus system attempts to focus quickly on
SET 4 FOR SUDDENLY APPEARING subjects entering the focus area. Choose for
SUBJECT
subjects that appear abruptly or when rapidly
switching subjects.
Choose for hard-to-track subjects prone not only
SET 5 FOR ERRATICALLY MOVING
to sudden changes in velocity but also to large
& ACCEL./DECEL. SUBJECT
movements front to back and left to right.
Adjust TRACKING SENSITIVITY, SPEED
TRACKING SENSITIVITY, and ZONE AREA
SET 6 CUSTOM
SWITCHING to suit your preferences based on
the values for Sets 1–5 (P 127, 129).
126
AF/MF SETTING (Still Photography)
Focus Tracking Options
The individual parameters that are part of a focus tracking set are
described below.
TRACKING SENSITIVITY
This parameter determines how long the
camera waits to switch focus when an
object enters the focus area behind or in
front of the current subject. The higher
the value, the longer the camera will wait.
TRACKING SENSITIVITY
QUICK
LOCKED ON
SETS THE TRACKING
SENSITIVITY ON THE SUBJECT
ADJUST
0
1
Options
2
3
SWITCH
4
O • The higher the value, the longer it takes the camera to refocus when
you attempt to switch subjects.
• The lower the value, the more likely the camera is to switch focus
from your subject to other objects in the focus area.
0
Options
1
6
SPEED TRACKING SENSITIVITY
STEADY
ACCEL./DECEL.
SETS THE SPEED TRACKING
SENSITIVITY FOR MOVING SUBJECT
ADJUST
SWITCH
2
O The higher the value, the more difficulty the camera will have focusing
in situations in which autofocus does not perform well, such as when
the subject is highly reflective or low in contrast.
127
The Shooting Menus
SPEED TRACKING SENSITIVITY
This parameter determines how sensitive the tracking system is to changes in
subject velocity. The higher the value,
the greater the precision with which the
system attempts to respond to sudden
movement.
ZONE AREA SWITCHING
This parameter determines the focus
area given priority in zone AF.
ZONE AREA SWITCHING
CENTER AUTO
FRONT
SETS THE SWITCHING SENSITIVITY
OF FOCUS FRAME IN ZONE AREA
ADJUST
Option
FRONT
AUTO
CENTER
SWITCH
Description
Zone AF assigns priority to the subjects closest to the camera.
The camera locks focus on the subject at the center of the zone
and then switches focus areas as necessary to track it.
Zone AF assigns priority to subjects in the center of the zone.
O This option takes effect only when y ZONE is selected for AF mode.
6
The Shooting Menus
Set Values
Parameter values for the different sets are listed below.
AF-C CUSTOM
TRACKING
SPEED TRACKING
SETTINGS
SENSITIVITY
SENSITIVITY
SET 1
2
0
SET 2
3
0
SET 3
2
2
SET 4
0
1
SET 5
3
2
128
ZONE AREA
SWITCHING
AUTO
CENTER
AUTO
FRONT
AUTO
AF/MF SETTING (Still Photography)
Custom Focus Tracking Options
Follow the steps below to adjust settings for Set 6.
1
Select AF-C CUSTOM SETTINGS >
SET 6 CUSTOM.
AF-C CUSTOM SETTINGS
SET 6 CUSTOM
TRACKING SENSITIVITY
SPEED TRACKING SENSITIVITY
ZONE AREA SWITCHING
ADJUST
AUTO
SET DETAIL
RESET
2
Highlight items using the focus stick (focus lever) and rotate
the front command dial to change. To reset settings to their
original values, press the DRIVE/DELETE button.
3
Press DISP/BACK when settings are complete.
6
The Shooting Menus
129
STORE AF MODE BY ORIENTATION
Choose whether the AF mode used when the camera is in portrait orientation is stored separately from that used when the
camera is in landscape orientation.
Option
OFF
FOCUS AREA ONLY
ON
Description
The same settings are used in both orientations.
The focus area for each orientation can be selected separately.
The focus mode and focus area can be selected separately.
AF POINT DISPLAY yz
Choose whether individual focus frames are displayed when
ZONE or WIDE/TRACKING is selected for G AF/MF SETTING >
AF MODE.
Options
ON
6
OFF
The Shooting Menus
NUMBER OF FOCUS POINTS
Choose the number of focus points available for focus-point selection in manual focus mode or when SINGLE POINT is selected
for AF MODE.
Option
Description
Choose from 117 focus points arranged in a 9- by 13-point
117 POINTS (9 × 13)
grid.
Choose from 425 focus points arranged in a 17- by 25-point
425 POINTS (17 × 25)
grid.
130
AF/MF SETTING (Still Photography)
PRE-AF
If ON is selected, the camera will continue to adjust focus even
when the shutter button is not pressed halfway. The camera
adjusts focus continuously, allowing it to focus faster when the
shutter button is pressed halfway. Choosing this option helps
prevent missed shots.
Options
ON
OFF
O Choosing ON increases the drain on the battery.
xF AF ILLUMINATOR
If ON is selected, the AF-assist illuminator will light to assist
autofocus.
Options
ON
OFF
O • The camera may be unable to focus using the AF-assist illuminator
in some cases.
• If the camera is unable to focus, try increasing the distance to the
eyes.
N
Any changes made using this item also apply in movie mode (P 169).
131
The Shooting Menus
subject.
• Avoid shining the AF-assist illuminator directly into your subject’s
6
FACE/EYE DETECTION SETTING
If the camera detects human faces, it will
assign them priority over the background
and adjust settings appropriately for portraits when setting focus and exposure.
You can also choose whether the camera
focuses on the left or right eye when face
detection is on.
Option
6
Description
Adjust settings for Intelligent Face Detection. You can also adjust
eye detection settings.
• g EYE OFF: Intelligent Face Detection only.
u EYE AUTO: The camera automatically chooses which eye
FACE DETECTION •
to focus on when a face is detected.
ON
• w RIGHT EYE PRIORITY: The camera focuses on the right
eye of subjects detected using Intelligent Face Detection.
• v LEFT EYE PRIORITY: The camera focuses on the left eye
of subjects detected using Intelligent Face Detection.
OFF
Intelligent Face Detection and eye priority off.
The Shooting Menus
O • If the subject moves as the shutter button is pressed, the face may
not be in the area indicated by the green border when the picture
is taken.
• In some modes, the camera may set exposure for the frame as a
whole rather than the portrait subject.
132
AF/MF SETTING (Still Photography)
N • The face selected by the camera is indicated by a green border. Any
133
6
The Shooting Menus
other faces detected by the camera are indicated by gray borders.
To have the camera focus on a different subject, tap inside the gray
border. The g icon will change from white to green.
• When DIRECT AF POINT SELECTION/FACE SELECT is chosen for
D BUTTON/DIAL SETTING > FOCUS LEVER SETTING > TILT o, you
can also switch subjects using the focus stick (focus lever) or (during
viewfinder photography) touch controls (P 21).
• To switch from face detection to manual focus-area selection when
EDIT FOCUS AREA or ZOOM is selected for D BUTTON/DIAL
SETTING > FOCUS LEVER SETTING > PUSH, press the center of the
focus stick (focus lever). Press again to re-enable face detection.
• If the selected subject leaves the frame, the camera will wait a set
time for its return and consequently the green frame may sometimes
appear in locations where no face is seen.
• You cannot switch subjects during burst photography.
• Depending on shooting conditions, face selection may be suspended at the close of burst shooting.
• Faces can be detected with the camera in vertical or horizontal orientation.
• If the camera is unable to detect the subject’s eyes because they are
hidden by hair, glasses, or other objects, the camera will instead focus
on faces.
• Face/eye detection options can also be accessed via shortcuts
(P 244).
AF+MF
If ON is selected in focus mode l and focus has been locked
(whether by pressing the shutter button halfway or by other
means), focus lock can be ended and focus adjusted manually by
rotating the focus ring.
Options
ON
OFF
O • Lenses with a focus distance indicator must be set to manual focus
mode (MF) before this option can be used. Selecting MF disables the
focus distance indicator.
• If the lens is equipped with a focus distance indicator, set the focus
ring to the center, as the camera may fail to focus if the ring is set to
infinity or the minimum focus distance.
N STANDARD and FOCUS PEAK HIGHLIGHT MF assist options can be
selected using MF ASSIST.
6
AF + MF Focus Zoom
When ON is selected for G AF/MF SETTING > FOCUS CHECK and SINGLE
POINT selected for AF MODE, focus zoom can be used to zoom in on the
selected focus area.
The Shooting Menus
134
AF/MF SETTING (Still Photography)
MF ASSIST
Choose how focus is displayed in manual focus mode.
Option
Description
Focus is displayed normally (focus peaking, digital split image, and
STANDARD
digital microprism are not available).
Displays a black-and-white (MONOCHROME) or color (COLOR)
DIGITAL SPLIT split image in the center of the frame. Frame the subject in the
IMAGE
split-image area and rotate the focus ring until the four parts of
the split image are correctly aligned.
A grid pattern that emphasizes blur is displayed when the subject
DIGITAL
is out of focus, disappearing to be replaced by a sharp image when
MICROPRISM
the subject is in focus.
FOCUS PEAK The camera heightens high-contrast outlines. Choose a color and
HIGHLIGHT peaking level.
FOCUS CHECK
If ON is selected, the display will automatically zoom in on the
selected focus area when the focus ring is rotated in manual focus mode.
ON
OFF
N • Press the focus stick (focus lever) to cancel focus zoom.
• The zoom position is centered on the current focus area and changes
when the focus area is changed.
135
6
The Shooting Menus
Options
INTERLOCK SPOT AE & FOCUS AREA
Select ON to meter the current focus frame when MULTI or SPOT
is selected for metering mode.
Options
ON
OFF
xF INSTANT AF SETTING
Chooses how the camera focuses when a button to which focus
lock or AF-ON is assigned is pressed with MANUAL FOCUS selected for FOCUS MODE.
Options
AF-S
N
6
AF-C
Any changes made using this item also apply in movie mode (P 171).
The Shooting Menus
xF DEPTH-OF-FIELD SCALE
Choose FILM FORMAT BASIS to help you make practical assessments of depth of field for pictures that will be viewed as prints
and the like, PIXEL BASIS to help you assess depth of field for
pictures that will be viewed at high resolutions on computers or
other electronic displays.
Options
PIXEL BASIS
FILM FORMAT BASIS
N Any changes made using this item also apply in movie mode (P 171).
136
AF/MF SETTING (Still Photography)
RELEASE/FOCUS PRIORITY
Choose how the camera focuses when the shutter button is
pressed all the way down with SINGLE AF or CONTINUOUS AF
selected for FOCUS MODE.
Option
RELEASE
FOCUS
Description
Shutter response is prioritized over focus. Pictures can be taken
when the camera is not in focus.
Focus is prioritized over shutter response. Pictures can be only
taken when the camera is in focus.
xF AF RANGE LIMITER
Limit the range of available focus distances for increased focus
speed.
Option
OFF
CUSTOM
Limit focus to a preset range.
O • Choosing a focus range that includes distances shorter than the minimum focus distance of the lens disables the focus limiter.
• The values listed and displayed for the focus limiter may differ from
the actual focus distance.
N • The following additional operations can be performed when CUSTOM
is selected:
- You can tap objects in the touch screen display to choose the focus
range.
- Instead of tapping an object in the display, you set the maximum
focus distance to infinity by rotating the focus ring.
• Any changes made using this item also apply in movie mode
(P 171).
137
6
The Shooting Menus
PRESET1
PRESET2
Description
Focus limiter disabled.
Limit focus to a range of distances defined by a minimum and
maximum.
• OK: Limit focus to the selected range.
• SET: Choose two objects and limit focus to the distance between them.
xF TOUCH SCREEN MODE
Choose the shooting operations performed using touch controls.
Mode
Description
Tap your subject in the display to focus and release the shutter.
TOUCH
In burst mode, pictures will be taken while you keep your finger
SHOOTING on the display.
• In focus mode l (SINGLE AF), the camera focuses when you
AF
AF OFF
tap your subject in the display. Focus locks at the current distance until you tap the AF OFF icon.
• In focus mode k (CONTINUOUS AF), the camera initiates focus
when you tap your subject display. The camera will continue
to adjust focus for changes in the distance to the subject until
you tap the AF OFF icon.
• In manual focus mode p (MANUAL FOCUS), you can tap the
display to focus on the selected subject using autofocus.
AREA
Tap to select a point for focus or zoom. The focus frame will
move to the selected point.
OFF
Touch controls disabled.
6
The Shooting Menus
N • To disable touch controls and hide the touch screen mode indicator, select OFF for D BUTTON/DIAL SETTING > TOUCH SCREEN
SETTING > x TOUCH SCREEN SETTING.
• Any changes made using this item also apply in movie mode
(P 172).
138
AF/MF SETTING (Still Photography)
Touch Controls for Focus Zoom
Different touch controls are used during focus zoom (focus check enabled).
Central Area
Tapping the center of the display performs the
operations below.
Mode
TOUCH SHOOTING
AF
AREA
OFF
Operation performed
SINGLE AF/MANUAL FOCUS: Take a picture
SINGLE AF: AF
MANUAL FOCUS: Instant AF
SINGLE AF: AF
MANUAL FOCUS: Instant AF
SINGLE AF/MANUAL FOCUS: OFF
Other Areas
Tapping other areas simply scrolls the display,
whether during still photography or movie recording and regardless of the option selected
for touch screen mode.
6
The Shooting Menus
139
SHOOTING SETTING (Still Photography)
Adjust shooting options for still photography.
To display shooting settings, press MENU/OK
in the photo shooting display and select
the A (SHOOTING SETTING) tab.
SHOOTING SETTING
SPORTS FINDER MODE
PRE-SHOT
SELF-TIMER
SAVE SELF-TIMER SETTING
SELF-TIMER LAMP
INTERVAL TIMER SHOOTING
INTERVAL TIMER SHOOTING EXPOSURE SMOOTHING
AE BKT SETTING
EXIT
SPORTS FINDER MODE
Take pictures using the crop in the center
of the display. Choose this option for pictures of athletes, birds, and other moving
subjects.
Option
ON
6
The Shooting Menus
OFF
Description
Pictures are taken using a 1.25× crop, reducing the picture angle by an
amount equivalent to increasing lens focal length by 1.25×; the crop is
shown by a frame in the display.
The 1.25× crop is disabled.
N • The H IMAGE QUALITY SETTING > IMAGE SIZE item in the shooting menu is fixed at P.
• The sports finder is not available in modes that offer an electronic
shutter.
140
SHOOTING SETTING (Still Photography)
PRE-SHOT sJ
To reduce the lag between your pressing the shutter button all
the way down and the resulting picture being recorded to the
memory card, the camera starts shooting with the electronic
shutter when the shutter button is pressed halfway and saves a
series shots starting just before the shutter button is pressed the
rest of the way down.
Options
ON
OFF
N Pre-shot photography is available only when s ELECTRONIC SHUTTER
is selected in CH (high speed burst) drive mode (P 146).
SELF-TIMER
Choose a shutter release delay.
Option
141
6
The Shooting Menus
Description
The shutter is released two seconds after the shutter button is pressed.
Use to reduce blur caused by the camera moving when the shutter
R 2 SEC
button is pressed. The self-timer lamp blinks as the timer counts
down.
The shutter is released ten seconds after the shutter button is pressed.
S 10 SEC Use for photographs in which you wish to appear yourself. The
self-timer lamp blinks immediately before the picture is taken.
OFF
Self-timer off.
If an option other than OFF is selected, the timer will start when the shutter
button is pressed all the way down. The
display shows the number of seconds remaining until the shutter is released. To
stop the timer before the picture is taken,
press DISP/BACK.
9
O • Stand behind the camera when using the shutter button. Standing in
front of the lens can interfere with focus and exposure.
• The self-timer turns off automatically when the camera is turned off.
SAVE SELF-TIMER SETTING
If ON is selected, the chosen self-timer setting will remain in effect after a picture is taken or the camera is turned off.
Options
ON
6
OFF
The Shooting Menus
SELF-TIMER LAMP
If ON is selected, the self-timer lamp will light during self-timer
photography. Select OFF when shooting night scenes or in other
situations in which you would prefer that the lamp remain unlit.
Options
ON
142
OFF
SHOOTING SETTING (Still Photography)
INTERVAL TIMER SHOOTING
Configure the camera to take photos automatically at a preset
interval.
1
Select A SHOOTING SETTING in the
shooting menu, highlight INTERVAL
TIMER SHOOTING, and press MENU/OK.
2
Use the focus stick (focus lever) to
choose the interval and number of
shots. Press MENU/OK to proceed.
INTERVAL/NUMBER OF TIMES
INTERVAL
NUMBER OF TIMES
END
LATER
ESTIMATED START TIME
START
3
CANCEL
START WAITING TIME
PM
CANCEL
Use the focus stick to choose the
starting time and then press MENU/OK.
Shooting will start automatically.
6
O Interval timer photography cannot be used at a shutter speed of
B (bulb) or with multiple exposure photography. In burst mode, only
one picture will be taken each time the shutter is released.
N • Use of a tripod is recommended.
• Check the battery level before starting. We recommend using USB
power source (P 241).
• The display turns off between shots and lights a few seconds before
the next shot is taken.
• The display can be activated at any time by pressing the shutter button.
• To continue shooting until the number of shots taken equals the
number of exposures remaining at the time interval-timer photography started, set the number of shots to ∞.
143
The Shooting Menus
CANCEL
INTERVAL TIMER SHOOTING EXPOSURE SMOOTHING
Select ON to automatically adjust exposure during interval-timer
photography to prevent it changing dramatically between shots.
Options
ON
OFF
N • Large changes in subject brightness may make exposure appear er-
ratic. We recommend that you choose shorter values for INTERVAL
TIMER SHOOTING > INTERVAL with subjects that brighten or dim
dramatically during shooting.
• In manual mode (mode M), exposure smoothing is only available if an
AUTO option is selected for sensitivity.
AE BKT SETTING
Adjust exposure bracketing settings.
Option
6
The Shooting Menus
Description
Choose the number of shots in the bracketing sequence
and the amount exposure is varied with each shot.
FRAMES: Choose the number of shots in the bracketing
•
FRAMES/STEP SETTING
sequence.
• STEP: Choose the amount exposure is varied with each
shot.
• 1 FRAME: The shots in the bracketing sequence are taken
one at a time.
1 FRAME/CONTINUOUS
• CONTINUOUS: The shots in the bracketing sequence are
taken in a single burst.
SEQUENCE SETTING Choose the order in which the shots are taken.
144
SHOOTING SETTING (Still Photography)
FILM SIMULATION BKT
Choose the three film simulation types used for film simulation
bracketing (P 106).
FOCUS BKT SETTING
Choose from AUTO and MANUAL focus bracketing modes
(P 90).
MULTIPLE EXPOSURE CTRL
Choose how the camera combines shots to create a multiple exposure (P 98).
PHOTOMETRY
Choose how the camera meters exposure (P 84).
6
The Shooting Menus
145
SHUTTER TYPE
Choose the shutter type. Choose the electronic shutter to mute
the shutter sound.
Option
t MECHANICAL SHUTTER
s ELECTRONIC SHUTTER
Description
Take pictures with the mechanical shutter.
Take pictures with the electronic shutter.
The camera chooses the mechanical or electronic
u MECHANICAL + ELECTRONIC
shutter according to shooting conditions.
O When using the electronic shutter, note the following:
• For faster shutter speeds, set the shutter speed dial to 4000 or T and
rotate the front command dial.
• Distortion may be visible in shots of moving subjects.
• Distortion may also be visible in hand-held shots taken at high shutter speeds; use of a tripod is recommended.
• Banding and fog may occur in shots taken under fluorescent lights or
other flickering or erratic illumination.
• When taking pictures with the shutter muted (P 214), respect your
6
subjects’ image rights and right to privacy.
The Shooting Menus
N The following restrictions apply when the electronic shutter is used:
• “Extended” sensitivity values are not supported
• Long exposure noise reduction has no effect
• The flash cannot be used
146
SHOOTING SETTING (Still Photography)
FLICKER REDUCTION
Reduce flicker in pictures and the display when shooting under
fluorescent lighting and other similar light sources.
Option
ALL FRAMES
FIRST FRAME
OFF
Description
Flicker reduction is performed for all frames. Compared
to when flicker reduction is performed only on the first
frame, the frame advance rate for burst photography will
drop.
Flicker reduction is performed for the first frame only; in
burst photography, the value measured for the first frame
in each burst will be used for all subsequent shots. Flicker
may be visible during burst photography.
Flicker reduction disabled.
O • Flicker reduction increases the time needed to record pictures.
• OFF is selected for FLICKER REDUCTION when the electronic shutter is used.
• Flicker reduction is not available during movie recording.
IS MODE
Enable or disable image stabilization.
6
Description
Image stabilization on.
Image stabilization enabled only when the shutter butm SHOOTING ONLY ton is pressed halfway (focus mode k) or the shutter is
released.
Image stabilization off ; x appears in the display. Choose
OFF
when the camera is mounted on a tripod or otherwise
fixed in place.
N • Image stabilization is available with compatible lenses only.
• The setting selected with the lens image stabilization switch, if any,
takes priority over the setting chosen with the IS mode.
• Note that vibration or camera sounds may be noticeable as image
stabilization takes effect.
147
The Shooting Menus
Option
l CONTINUOUS
SHOOTING SETTING (Still Photography)
ISO
Adjust the camera’s sensitivity to light (P 82).
xF WIRELESS COMMUNICATION
Connect to smartphones running the latest version of the FUJIFILM
Camera Remote app. The smartphone can then be used to:
• Control the camera and take pictures remotely
• Receive pictures uploaded from the camera
• Browse the pictures on the camera and download selected pictures
• Upload location data to the camera
N For downloads and other information, visit:
http://app.fujifilm-dsc.com/en/camera_remote/
6
The Shooting Menus
148
FLASH SETTING (Still Photography)
Adjust flash-related settings for still photography.
To display flash settings, press MENU/OK
in the photo shooting display and select
the F (FLASH SETTING) tab.
FLASH SETTING
FLASH FUNCTION SETTING
RED EYE REMOVAL
TTL-LOCK MODE
LED LIGHT SETTING
COMMANDER SETTING
CH SETTING
EXIT
FLASH FUNCTION SETTING
Choose a flash control mode, flash mode,
or sync mode or adjust the flash level.
The options available vary with the flash.
N For more information on flash settings, see
“External Flash Units” (P 266) in “Peripherals and Optional Accessories”.
MODE
EF-X8
ADJUST
END
RED EYE REMOVAL
Remove red-eye effects caused by the flash.
6
Description
A red-eye reduction pre-flash is combined with digital red-eye
FLASH+REMOVAL
removal.
FLASH
Flash red-eye reduction only.
REMOVAL
Digital red-eye removal only.
OFF
Flash red-eye reduction and digital red-eye removal off.
N • Flash red-eye reduction can be used in TTL flash control mode.
• Digital red-eye removal is performed only when a face is detected.
• Digital red-eye removal is not available with RAW images.
149
The Shooting Menus
Option
TTL-LOCK MODE
Instead of adjusting flash level with each shot, TTL flash control
can be locked for consistent results across a series of photographs.
Option
Description
Flash output is locked at the value metered for the most
LOCK WITH LAST FLASH
recent photo.
LOCK WITH METERING The camera emits a series of pre-flashes and locks flash
FLASH
output at the metered value.
N • To use TTL lock, assign TTL-LOCK to a camera control and then use
the control to enable or disable TTL lock (P 253).
• Flash compensation can be adjusted while TTL lock is in effect.
• Selecting LOCK WITH LAST FLASH displays an error message if no
previously metered value exists.
6
LED LIGHT SETTING
Choose whether to use the flash unit’s LED video light (if available) as a catchlight or AF-assist illuminator when taking photos.
The Shooting Menus
Option
CATCHLIGHT
AF ASSIST
AF ASSIST+CATCHLIGHT
OFF
Role of LED video light in still photography
Catchlight
AF-assist illuminator
AF-assist illuminator and catchlight
None
N In some cases, this option can also be accessed via the FLASH FUNCTION
SETTING menu.
150
FLASH SETTING (Still Photography)
COMMANDER SETTING
Choose groups when using the camera flash unit as a commander for Fujifilm optical wireless remote flash control. This option is
available when the camera is used with clip-on flash units that
support Fujifilm optical wireless flash control.
Options
Gr A
Gr B
Gr C
OFF
N In some cases, this option can also be accessed via the FLASH FUNCTION
SETTING menu.
CH SETTING
Choose the channel used for communication between the commander and remote flash units. Separate channels can be used
for different flash systems or to prevent interference when multiple systems are operating in close proximity.
Options
CH1
CH2
CH3
CH4
6
The Shooting Menus
151
MOVIE SETTING (Still Photography)
Adjust options for movies shot during still photography
using function buttons that have been assigned MOVIE
RECORDING RELEASE.
To display movie settings, press MENU/OK
in the photo shooting display and select
the B (MOVIE SETTING) tab.
N The options available vary with the shooting mode selected.
MOVIE SETTING
MOVIE MODE
FILE FORMAT
FULL HD HIGH SPEED REC
F IS MODE
AUDIO SETTING
MIC/REMOTE RELEASE
EXIT
MOVIE MODE
This item is also found in the movie menus (P 155). Changes
here also apply to the item in the movie menus.
FILE FORMAT
This item is also found in the movie menus (P 156). Changes
here also apply to the item in the movie menus.
6
The Shooting Menus
FULL HD HIGH SPEED REC
This item is also found in the movie menus (P 157). Changes
here also apply to the item in the movie menus.
F IS MODE
This item is also found in the movie menus (P 161). Changes
here also apply to the item in the movie menus.
152
MOVIE SETTING (Still Photography)
AUDIO SETTING
Adjust audio-related settings for movie recording.
INTERNAL MIC LEVEL ADJUSTMENT
Adjust the recording level for the built-in microphone.
Option
AUTO
MANUAL
OFF
Description
The camera adjusts the recording level automatically.
Adjust the recording level manually. Press the focus stick (focus
lever) right to choose from 25 recording levels.
Turn the built-in microphone off.
EXTERNAL MIC LEVEL ADJUSTMENT
Adjust the recording level for external microphones.
Option
AUTO
MANUAL
OFF
Description
The camera adjusts the recording level automatically.
Adjust the recording level manually. Press the focus stick (focus
lever) right to choose from 25 recording levels.
Disable recording using external microphones.
6
Option
MIC
LINE
Description
Choose this option for direct connection to an external microphone.
Choose this option for external audio devices connected via
line output.
MIC LEVEL LIMITER
Reduces distortion caused by input that exceeds the limits of the
microphone’s audio circuits.
Options
ON
OFF
153
The Shooting Menus
MIC JACK SETTING
Specify the type of hardware connected to the microphone jack.
MOVIE SETTING (Still Photography)
WIND FILTER
Choose whether to enable wind noise reduction during movie
recording.
Options
ON
OFF
LOW CUT FILTER
Choose whether to enable the low-cut filter, reducing low-frequency noise during movie recording.
Options
ON
OFF
HEADPHONES VOLUME
Adjust the headphone volume.
Option
0
1—10
6
Description
Mute output to the headphones.
Choose a volume of from 1 to 10.
The Shooting Menus
MIC/REMOTE RELEASE
Specify whether the device connected to the microphone/remote release connector is a microphone or a remote release.
Options
m MIC
154
n REMOTE
MOVIE SETTING (Movie Recording)
Adjust options for movies shot with F (movie) selected in
the drive-mode menu.
To display options for movie recording,
press MENU/OK in the movie shooting display and select the B (MOVIE SETTING)
tab.
N The options available vary with the shoot-
MOVIE SETTING
MOVIE MODE
FILE FORMAT
FULL HD HIGH SPEED REC
FIX MOVIE CROP MAGNIFICATION
F-Log RECORDING
4K MOVIE OUTPUT
FULL HD MOVIE OUTPUT
HDMI OUTPUT INFO DISPLAY
EXIT
ing mode selected.
MOVIE MODE
Before shooting movies, choose the
frame rate, bit rate, and frame size and
aspect ratio.
1
MOVIE MODE
155
6
The Shooting Menus
In the shooting menu, select B MOVIE SETTING, then highlight MOVIE MODE and press MENU/OK.
2
Press the focus stick (focus lever) up or down to highlight the
desired frame size and aspect ratio (A) and press the stick
right.
• Choose V16 : 9 or d17 : 9 for 4K movies with aspect ratios of 16 or 17 to 9.
• Choose W16 : 9 or W17 : 9 for Full HD movies with aspect
ratios of 16 or 17 to 9.
3
Press the focus stick (focus lever) up or down to highlight a
frame rate (B) and press the stick right.
23.98P
4
24P
Options
29.97P
50P
59.94P
Press the focus stick up or down to highlight a bit rate (C)
and press MENU/OK.
Options
100Mbps
50Mbps
6
25P
200Mbps
N The choice of frame and bit rates varies with the movie mode.
The Shooting Menus
FILE FORMAT
Choose a movie format.
Option
MOV/H.264 LPCM
MP4/H.264 AAC
Description
High picture and sound quality.
A format suitable for movies that will be uploaded to the
web.
N Movies are recorded to the memory card in 8-bit 4∶2∶0 and output to
HDMI in 10-bit 4∶2∶2.
156
MOVIE SETTING (Movie Recording)
FULL HD HIGH SPEED REC
Record high-frame-rate Full HD movies. High-frame-rate movies can be played back in slow motion, giving you time to view
fast-moving subjects or details too fleeting for the naked eye. Select ON to choose the recording and playback rates separately.
Playback
23.98P
24P
Options
25P
29.97P
50P
59.94P
Recording
Options
100P
120P
200P
240P
N • High-speed movies are recorded with no sound.
• Maximum recording length is 6 minutes, but varies with camera settings.
• The footage recorded to the memory card is compressed with the
157
6
The Shooting Menus
goal of keeping the amount of data recorded to 200 Mbps per second.
• The options available for playback rate vary with the option selected
for rate of recording.
FIX MOVIE CROP MAGNIFICATION C
Fix the movie crop ratio at 1.29∶1. This makes it easier to match
crops when filming in different formats.
Options
ON
OFF
F-Log RECORDING
Select ON to record movies using a soft gamma curve with a wide
gamut suitable for further processing post-production. Sensitivity is restricted to values between ISO 640 and 12800.
Options
ON
6
The Shooting Menus
158
OFF
MOVIE SETTING (Movie Recording)
4K MOVIE OUTPUT
Choose the destination for 4K movies shot while the camera is
connected to an HDMI recorder or other device that supports 4K.
Option
b 4K Y 4K
b 4K Y FHD
b FHD Y 4K
b − Y 4K
Description
4K movies are recorded to the camera memory card and output to the HDMI device in 4K.
4K movies are recorded to a camera memory card in 4K and
output to the HDMI device in Full HD.
4K movies are output to the HDMI device in 4K and recorded to
the camera memory card in Full HD.
4K movies are output to the HDMI device in 4K. The camera
does not record 4K movies to a memory card.
N This option is only available when V 16 : 9 or d 17 : 9 is selected for
B MOVIE SETTING > MOVIE MODE in the shooting menu.
FULL HD MOVIE OUTPUT
Choose the destination for Full HD movies shot while the camera
is connected to an HDMI device.
Option
N • This option is only available when W 16 : 9 or W 17 : 9 is selected
for B MOVIE SETTING > MOVIE MODE in the shooting menu.
• When OFF is selected for HDMI OUTPUT INFO DISPLAY, movies will
be output to the HDMI device in 4:2:2 10-bit format.
159
6
The Shooting Menus
Description
Full HD movies are output to the HDMI device and recorded to
b FHD Y FHD
the camera memory card.
Full HD movies are not recorded to the camera memory card
b − Y FHD
but are output to the HDMI device.
HDMI OUTPUT INFO DISPLAY
If ON is selected, HDMI devices to which the camera is connected
will mirror the information in the camera display.
Options
ON
OFF
4K HDMI STANDBY QUALITY
Choose whether output to connected HDMI devices switches
from 4K to Full HD during standby.
Option
V
W
6
Description
Output to HDMI devices continues at 4K during standby.
Output to HDMI devices switches to Full HD during standby,
reducing the drain on the battery.
HDMI REC CONTROL
Choose whether the camera sends movie start and stop signals
to the HDMI device when the shutter button is pressed to start
and stop movie recording.
The Shooting Menus
Options
ON
OFF
F PHOTOMETRY
Options are the same as those for still photography, but settings
must be adjusted separately (P 84).
N The photometry option selected in the photo menus applies to movies recorded using function buttons that have been assigned MOVIE
RECORDING RELEASE.
160
MOVIE SETTING (Movie Recording)
F IS MODE
Enable or disable image stabilization.
Option
l CONTINUOUS
OFF
Description
Image stabilization on.
Image stabilization off ; x appears in the display. Choose
when the camera is mounted on a tripod or otherwise
fixed in place.
N • Image stabilization is available with compatible lenses only.
• The setting selected with the lens image stabilization switch, if any,
takes priority over the setting chosen with the IS mode.
• Note that vibration or camera sounds may be noticeable as image
stabilization takes effect.
F ISO
Adjust the camera’s sensitivity to light.
Option
H (25600)
160–12800
161
6
The Shooting Menus
AUTO
Description
Choose for special situations. Note that dynamic range may be
reduced and that pictures may be mottled.
Adjust sensitivity manually. Selected value is shown in display.
Sensitivity is automatically adjusted in response to shooting
conditions.
ZEBRA SETTING
Highlights that may be overexposed are shown by zebra stripes
in the movie mode display.
Option
ZEBRA RIGHT
ZEBRA LEFT
OFF
Description
Right-slanting stripes.
Left-slanting stripes.
Stripes off.
ZEBRA LEVEL
Choose the brightness threshold for the zebra stripe display.
50
6
55
60
65
70
Options
75
80
85
90
95
100
MOVIE OPTIMIZED CONTROL oL
Select ON to allow movie settings to be adjusted using only the
command dials and touch-screen controls. You may find this
helpful in preventing the sounds of camera controls being recorded with movies (P 23).
The Shooting Menus
Options
ON
162
OFF
MOVIE SETTING (Movie Recording)
TALLY LIGHT
Choose the lamp (indicator or AF-assist) that lights during movie
recording and whether the lamp blinks or remains steady.
Indicator lamp
Description
The indicator lamp lights during movie recording.
The indicator lamp blinks during movie recording.
The indicator and AF-assist lamps light during movie recording.
The AF-assist lamp lights during movie recording.
6
The indicator and AF-assist lamps blink during movie recording.
The AF-assist lamp blinks during movie recording.
The indicator and AF-assist lamps remain off during movie recording.
xF WIRELESS COMMUNICATION
This item is also found in the photo menus (P 148).
163
The Shooting Menus
Option
FRONT OFF
REAR z
FRONT OFF
REAR y
FRONT z
REAR z
FRONT z
REAR OFF
FRONT y
REAR y
FRONT y
REAR OFF
FRONT OFF
REAR OFF
AF-assist illuminator
IMAGE QUALITY SETTING (Movie Recording)
Adjust image quality settings for movies.
To display image quality settings, press
MENU/OK in the movie shooting display and
select the H (IMAGE QUALITY SETTING)
tab.
IMAGE QUALITY SETTING
FILM SIMULATION
MONOCHROMATIC COLOR
WHITE BALANCE
DYNAMIC RANGE
TONE CURVE
COLOR
SHARPNESS
HIGH ISO NR
EXIT
N
The options available vary with the shooting mode selected.
F FILM SIMULATION
Options are the same as those for still photography, but settings
must be adjusted separately (P 106).
F MONOCHROMATIC COLOR
Options are the same as those for still photography, but settings
must be adjusted separately (P 108).
6
The Shooting Menus
F WHITE BALANCE
Options are the same as those for still photography, but settings
must be adjusted separately (P 109).
164
IMAGE QUALITY SETTING (Movie Recording)
F DYNAMIC RANGE
Choose a dynamic range for movie recording.
Option
V100%
W200%
X400%
Description
See “DYNAMIC RANGE” (P 113).
N • AUTO (automatic dynamic range control) is not available during
movie recording.
• W200% is available at sensitivities of from ISO 320 to ISO 12800,
X400% at sensitivities of from ISO 640 to 12800.
• The B MOVIE SETTING > F DYNAMIC RANGE option is available
when OFF is selected for B MOVIE SETTING > F-Log RECORDING.
F TONE CURVE
Options are the same as those for still photography, but settings
must be adjusted separately (P 114).
165
6
The Shooting Menus
F COLOR
Options are the same as those for still photography, but settings
must be adjusted separately (P 115).
F SHARPNESS
Options are the same as those for still photography, but settings
must be adjusted separately (P 115).
F HIGH ISO NR
Options are the same as those for still photography, but settings
must be adjusted separately (P 115).
V INTERFRAME NR
Select ON to enable interframe noise reduction.
Options
ON
OFF
N • Interframe noise reduction is available only when frame rates of
29.97P or slower are selected at a frame size of V or d.
• “Ghosting” may occur with moving subjects or if the camera is moved
during shooting.
6
The Shooting Menus
166
IMAGE QUALITY SETTING (Movie Recording)
F PERIPHERAL LIGHT CORRECTION
Select ON to enable peripheral illumination correction during
movie recording.
Options
ON
OFF
N • If ON is selected when a lens that does not transmit data to the
camera is attached using a FUJIFILM M MOUNT ADAPTER (available
separately), peripheral illumination will be adjusted according to the
option selected for H IMAGE QUALITY SETTING > xF MOUNT
ADAPTER SETTING > PERIPHERAL ILLUMINATION CORRECTION
in the shooting menu (P 124).
• Select OFF if you notice banding in movies recorded using this option.
xF MOUNT ADAPTER SETTING
This item is also found in the photo menus (P 123). Changes to
one apply to the other.
6
The Shooting Menus
167
AF/MF SETTING (Movie Recording)
Adjust focus settings for movies.
To display AF/MF settings, press MENU/OK
in the movie shooting display and select
the G (AF/MF SETTING) tab.
AF/MF SETTING
FOCUS AREA
FOCUS MODE
AF MODE
AF-C CUSTOM SETTING
AF ILLUMINATOR
FACE/EYE DETECTION SETTING
MF ASSIST
FOCUS CHECK
EXIT
N
The options available vary with the shooting mode selected.
F FOCUS AREA
Options are the same as those for still photography, but settings
must be adjusted separately (P 73).
F FOCUS MODE
Choose the focus mode for movie recording.
6
The Shooting Menus
Option
Description
p MANUAL FOCUS Focus manually.
k CONTINUOUS AF The camera focuses using AF-C.
The camera focuses using AF-S.
l SINGLE AF
F AF MODE
Choose how the camera selects the focus point for movie recording.
Option
MULTI
AREA
168
Description
The camera selects the focus area automatically.
The camera focuses on the subject in the selected focus area.
AF/MF SETTING (Movie Recording)
F AF-C CUSTOM SETTING
Select focus-tracking options when recording movies with
CONTINUOUS AF selected for F FOCUS MODE.
TRACKING SENSITIVITY
Choose how long the camera waits to switch focus when an object enters the focus area behind or in front of the current subject. See “TRACKING SENSITIVITY” (P 127).
0
1
Options
2
3
4
O • The higher the value, the longer it takes the camera to refocus when
you attempt to switch subjects.
• The lower the value, the more likely the camera is to switch focus
from your subject to other objects in the focus area.
AF SPEED
Adjust the autofocus response speed. Choose higher values for
faster response times, lower values for slower response times.
−4
−3
−2
+2
+3
+4
+5
xF AF ILLUMINATOR
This item is also found in the photo menus (P 131). Changes to
one apply to the other.
169
6
The Shooting Menus
−5
Options
−1
0
+1
F FACE/EYE DETECTION SETTING
Enable or disable Intelligent Face Detection when recording
movies.
Option
FACE DETECTION ON
OFF
Description
See “FACE/EYE DETECTION SETTING” (P 132).
Intelligent Face Detection and eye priority off.
O If SINGLE AF is chosen for FOCUS MODE when FACE DETECTION ON
is selected for G AF/MF SETTING > FACE/EYE DETECTION SETTING,
the camera will automatically switch to CONTINUOUS AF. Selecting
MANUAL FOCUS when FACE DETECTION ON is selected for FACE/
EYE DETECTION SETTING disables Intelligent Face Detection.
F MF ASSIST
Choose how focus is displayed when MANUAL FOCUS is selected for FOCUS MODE.
Option
STANDARD
6
The Shooting Menus
Description
Focus is displayed normally (focus peaking is not available).
The camera heightens high-contrast outlines. Choose a
FOCUS PEAK HIGHLIGHT
color and peaking level.
170
AF/MF SETTING (Movie Recording)
F FOCUS CHECK
Options are the same as those for still photography, but settings
must be adjusted separately (P 135).
xF INSTANT AF SETTING
This item is also found in the photo menus (P 136). Changes to
one apply to the other.
xF DEPTH-OF-FIELD SCALE
This item is also found in the photo menus (P 136). Changes to
one apply to the other.
xF AF RANGE LIMITER
This item is also found in the photo menus (P 137). Changes to
one apply to the other.
6
The Shooting Menus
171
xF TOUCH SCREEN MODE
Choose the shooting operations performed using touch controls.
Mode
Description
Instead of pressing the shutter button, you can tap your subject
in the display to focus and start recording. During recording, you
TOUCH
SHOOTING can tap the display to focus as described below. To end recording, press the shutter button.
Tapping the display focuses the camera on the selected point.
Use the shutter button to start and stop recording.
• When SINGLE AF is selected for FOCUS MODE, you can
refocus at any time by tapping your subject in the display.
• When CONTINUOUS AF is chosen for FOCUS MODE, the
camera will continuously adjust focus for changes in the disAF
tance to the subject at point selected by tapping the display.
• When MANUAL FOCUS is selected for FOCUS MODE, the
camera will focus using autofocus if you tap the display before
recording begins; during recording, you can tap the display
again to move the focus area to a new location.
Tap to position the focus area. Use the shutter button to start
and stop recording.
• When SINGLE AF is selected for FOCUS MODE, you can
reposition the focus area at any time by tapping your subject
in the display. To focus, use the button to which AF-ON is assigned.
AREA
• When CONTINUOUS AF is chosen for FOCUS MODE, the
camera will continuously adjust focus for changes in the distance to the subject at point selected by tapping the display.
• When MANUAL FOCUS is selected for FOCUS MODE,
you can tap the display to position the focus area over your
subject.
6
The Shooting Menus
OFF
172
Touch controls disabled.
AF/MF SETTING (Movie Recording)
N • To disable touch controls and hide the touch screen mode indica-
tor, select OFF for D BUTTON/DIAL SETTING > TOUCH SCREEN
SETTING > x TOUCH SCREEN SETTING.
• This item is also found in the photo menus (P 138). Changes to one
apply to the other.
Touch Controls for Focus Zoom
Different touch controls are used during focus zoom (focus check enabled).
Central Area
Tapping the center of the display performs the
operations below.
Mode
TOUCH SHOOTING
AF
OFF
6
The Shooting Menus
AREA
Operation performed
SINGLE AF: AF
MANUAL FOCUS: Instant AF
SINGLE AF: AF
MANUAL FOCUS: Instant AF
SINGLE AF: AF
MANUAL FOCUS: Instant AF
SINGLE AF/MANUAL FOCUS: OFF
Other Areas
Tapping other areas simply scrolls the display,
whether during still photography or movie recording and regardless of the option selected
for touch screen mode.
173
AF/MF SETTING (Movie Recording)
FOCUS CHECK LOCK
Choose whether focus zoom remains in effect once movie recording begins.
Options
ON
6
The Shooting Menus
174
OFF
AUDIO SETTING (Movie Recording)
Adjust settings for audio recorded during filming.
To display audio settings, press MENU/OK
in the movie shooting display and select
the P (AUDIO SETTING) tab.
AUDIO SETTING
INTERNAL MIC LEVEL ADJUSTMENT
EXTERNAL MIC LEVEL ADJUSTMENT
MIC JACK SETTING
MIC LEVEL LIMITER
WIND FILTER
LOW CUT FILTER
HEADPHONES VOLUME
MIC/REMOTE RELEASE
EXIT
INTERNAL MIC LEVEL ADJUSTMENT
Adjust the recording level for the built-in microphone.
Option
AUTO
MANUAL
OFF
Description
The camera adjusts the recording level automatically.
Adjust the recording level manually. Press the focus stick (focus
lever) right to choose from 25 recording levels.
Turn the built-in microphone off.
EXTERNAL MIC LEVEL ADJUSTMENT
Adjust the recording level for external microphones.
MANUAL
OFF
Description
The camera adjusts the recording level automatically.
Adjust the recording level manually. Press the focus stick (focus
lever) right to choose from 25 recording levels.
Disable recording using external microphones.
175
The Shooting Menus
Option
AUTO
6
MIC JACK SETTING
Specify the type of hardware connected to the microphone jack.
Option
MIC
LINE
Description
Choose this option for direct connection to an external microphone.
Choose this option for external audio devices connected via
line output.
MIC LEVEL LIMITER
Reduces distortion caused by input that exceeds the limits of the
microphone’s audio circuits.
Options
ON
OFF
WIND FILTER
Choose whether to enable wind noise reduction during movie
recording.
6
Options
The Shooting Menus
ON
OFF
LOW CUT FILTER
Choose whether to enable the low-cut filter, reducing low-frequency noise during movie recording.
Options
ON
176
OFF
AUDIO SETTING (Movie Recording)
HEADPHONES VOLUME
Adjust the headphone volume.
Option
0
1—10
Description
Mute output to the headphones.
Choose a volume of from 1 to 10.
MIC/REMOTE RELEASE
Specify whether the device connected to the microphone/remote release connector is a microphone or a remote release.
Options
m MIC
n REMOTE
6
The Shooting Menus
177
TIME CODE SETTING (Movie Recording)
Adjust time code (hour, minute, second, and frame number) display settings for movie recording.
To display time code settings, press
MENU/OK in the movie shooting display
and select the Q (TIME CODE SETTING)
tab.
TIME CODE SETTING
TIME CODE DISPLAY
START TIME SETTING
COUNT UP SETTING
DROP FRAME
HDMI TIME CODE OUTPUT
EXIT
TIME CODE DISPLAY
Select ON to display time codes during movie recording and
playback.
Options
ON
6
OFF
START TIME SETTING
Choose the time code starting time.
Option
The Shooting Menus
Description
Highlight this option and press the focus stick (focus lever)
MANUAL INPUT
right to choose a start time manually.
CURRENT TIME Set the start time to the current time.
RESET
Set the start time to 00:00:00.
COUNT UP SETTING
Choose whether time is clocked continuously or only during
movie recording.
Option
REC RUN
FREE RUN
178
Description
Time is clocked only during movie recording.
Time is clocked continuously.
TIME CODE SETTING (Movie Recording)
DROP FRAME
At frame rates of 59.94P, and 29.97P, a discrepancy will gradually develop between the time code (measured in seconds) and
the actual recording time (measured in fractions of a second).
Choose whether the camera drops frames as necessary to match
the recording time to the time code.
Option
ON
OFF
Description
The camera drops frames as necessary to maintain a strict
match between the time code and the actual recording time.
Frames are not dropped.
N • The time code display varies with the option selected.
ON
OFF
6
• Selecting a frame rate of 23.98P disables frame drop.
The Shooting Menus
HDMI TIME CODE OUTPUT
Choose whether time codes are output to HDMI devices.
Options
ON
OFF
179
MEMO
180
Playback and the Playback
Menu
181
The Playback Display
This section lists the indicators that may be displayed
during playback.
O For illustrative purposes, displays are shown with all indicators lit.
A
B
CD E F G
H
g
Playback and the Playback Menu
7
f
e
d
c
I
J
b
a
Z
Y
K
L
X
W
V
U
T
A Date and time..................................37, 39, 209
B Frame-number display
C Face detection indicator ............................132
D Bluetooth ON/OFF.......................................237
E Image transfer order ...................................199
F Image transfer status ........................237, 284
G Number of frames selected for upload ...199
H Frame number..............................................234
I Protected image ...........................................194
J Location data.......................................242, 285
K Battery level ......................................................36
L Image quality................................................105
M Image size ......................................................104
N Film format ....................................................156
O Film simulation ............................................106
P Dynamic range ............................................113
Q HDR .....................................................................93
182
S R Q P O NM
R White balance ..............................................109
S Sensitivity ..........................................................82
T Exposure compensation ...............................80
U Aperture...............................................56, 63, 65
V Shutter speed .....................................56, 59, 65
W Playback mode indicator .............................45
X Movie icon ........................................................52
Y Time code.......................................................178
Z HDR image .......................................................93
a Red-eye removal indicator...............149, 196
b Filter .................................................................100
c Gift image .........................................................45
d Photobook assist indicator .......................201
e DPOF print indicator ...................................203
f Voice memo ..................................................197
g Rating..............................................................198
The Playback Display
The DISP/BACK Button
The DISP/BACK button controls the display
of indicators during playback.
Standard
Information off
Playback and the Playback Menu
NEXT
Info display
7
183
The Playback Display
Viewing Photo Information
The photo information display changes each
time the focus stick (focus lever) is pressed up.
Basic data
Playback and the Playback Menu
7
Info display 1
NEXT
LENS
FOCAL LENGTH
COLOR SPACE
LENS MODULATION OPT.
S.S
F
23.0mm
F5.6
23.0mm
sRGB
ON
ISO
BACK
Info display 3
NEXT
Info display 2
Zooming in on the Focus Point
Press the center of the focus stick (focus lever) to zoom in on the focus
point. Press again to return to full-frame playback.
184
Viewing Pictures
Read this section for information on playback zoom and
multi-frame playback.
Use the front command dial to go from
full-frame playback to playback zoom or
multi-frame playback.
Full-frame playback
Playback
zoom
Medium zoom
Multi-frame
playback
Nine-frame view
Playback and the Playback Menu
100-0001
7
Maximum zoom
Hundred- frame view
185
Viewing Pictures
Playback Zoom
Rotate the front command dial right to zoom in on the current
picture. To exit zoom, press DISP/BACK or MENU/OK.
N • The
maximum zoom ratio varies with the option selected for
H IMAGE QUALITY SETTING > IMAGE SIZE.
• Playback zoom is not available with cropped or resized copies saved
at a size of a.
Playback and the Playback Menu
7
Scroll
• When the picture is zoomed in, the focus stick
(focus lever) can be used to view areas of the
image not currently visible in the display.
• To view other pictures without changing the
zoom ratio, press the center of the front command dial before rotating it.
Navigation window
Multi-Frame Playback
To change the number of images displayed, rotate the front command dial left when a picture is displayed full frame.
N • Use the focus stick (focus lever) to highlight images and press MENU/OK
to view the highlighted image full frame.
• In the nine- and hundred-frame displays, press the focus stick up or
down to view more pictures.
Viewing Other Pictures
In full-frame playback, you can view other pictures using the focus stick (focus lever). You can also press the center of the front
command dial and then rotate it to display other pictures. To use
the dial for playback zoom, press the center again.
186
The Playback Menu
Adjust playback settings.
The playback menu is displayed when
you press MENU/OK in playback mode.
PLAY BACK MENU
RAW CONVERSION
ERASE
CROP
RESIZE
PROTECT
IMAGE ROTATE
RED EYE REMOVAL
VOICE MEMO SETTING
EXIT
Saving RAW Pictures in Another Format
1
2
3
Display a RAW picture.
Highlight RAW CONVERSION in the playback menu.
Press MENU/OK.
A list of settings will be displayed.
RAW CONVERSION
REFLECT SHOOTING COND.
IMAGE SIZE
IMAGE QUALITY
PUSH/PULL PROCESSING
DYNAMIC RANGE
D RANGE PRIORITY
CREATE
4
5
CANCEL
Press the focus stick (focus lever) up or down to highlight a
setting.
Press the focus stick right to display
RAW CONVERSION
options.
100%
200%
400%
187
Playback and the Playback Menu
RAW CONVERSION
Even if you don’t have a computer, you can use the camera to
modify RAW pictures and save them in other formats.
7
6
7
Press the focus stick up or down to highlight the desired option.
8
Press the Q button.
A preview of the copy will be displayed.
9
Press MENU/OK.
The copy will be saved.
Press MENU/OK to select the highlighted option. The settings
list shown in Step 3 will be displayed. Repeat Steps 4 to 7 to
adjust additional settings.
Playback and the Playback Menu
N RAW conversion options can also be displayed by pressing the Q button when a RAW pictures is displayed during playback.
7
188
The Playback Menu
The settings that can be adjusted when converting pictures from
RAW to another format are:
Setting
O Some settings may be unavailable depending on the options chosen
when the picture was taken.
189
Playback and the Playback Menu
Description
Create a copy using the settings in effect at the time
REFLECT SHOOTING COND.
the photo was taken.
IMAGE SIZE
Choose an image size.
IMAGE QUALITY
Adjust image quality.
PUSH/PULL PROCESSING Adjust exposure.
DYNAMIC RANGE
Enhance details in highlights for natural contrast.
Reduce loss of detail in highlights and shadows
D RANGE PRIORITY
for natural-looking results when photographing
high-contrast scenes.
FILM SIMULATION
Simulate the effects of different types of film.
MONOCHROMATIC COLOR Add a warm or cool cast to monochrome pictures.
GRAIN EFFECT
Add a film grain effect.
Increase the range of tones available for rendering
COLOR CHROME EFFECT
colors that tend to be highly saturated, such as reds,
yellows, and greens.
Increase the range of tones available for rendering
COLOR CHROME FX BLUE
blues.
WHITE BALANCE
Adjust white balance.
WB SHIFT
Fine-tune white balance.
TONE CURVE
Adjust highlights and shadows.
COLOR
Adjust color density.
SHARPNESS
Sharpen or soften outlines.
HIGH ISO NR
Process the copy to reduce mottling.
CLARITY
Increase definition.
Improve definition by adjusting for diffraction and
LENS MODULATION OPTIMIZER
the slight loss of focus at the periphery of the lens.
COLOR SPACE
Choose the color space used for color reproduction.
HDR MODE
Reduce loss of detail in highlights and shadows.
7
ERASE
Delete individual pictures, multiple selected pictures, or all pictures.
O Deleted pictures cannot be recovered. Protect important pictures or
copy them to a computer or other storage device before proceeding.
Option
FRAME
SELECTED FRAMES
ALL FRAMES
Description
Delete pictures one at a time.
Delete multiple selected pictures.
Delete all unprotected pictures.
Playback and the Playback Menu
FRAME
1 Select FRAME for ERASE in the playback menu.
2
Press the focus stick (focus lever) left or right to scroll through
pictures and press MENU/OK to delete.
N • A confirmation dialog is not displayed before pictures are deleted; be
sure the correct picture is selected before pressing MENU/OK.
• Additional pictures can be deleted by pressing MENU/OK. Press the focus stick left or right to scroll through pictures and press MENU/OK to
delete.
7
190
The Playback Menu
SELECTED FRAMES
1 Select SELECTED FRAMES for ERASE in the playback menu.
Highlight pictures and press MENU/OK to select.
• Selected pictures are indicated by check marks (R).
• To deselect a highlighted picture, press MENU/OK again.
3
When the operation is complete, press DISP/BACK to display a
confirmation dialog.
4
Highlight OK and press MENU/OK to delete the selected pictures.
N Pictures in photobooks or printer orders are shown by S.
ALL FRAMES
1 Select ALL FRAMES for ERASE in the playback menu.
2
A confirmation dialog will be displayed; highlight OK and
press MENU/OK to delete all unprotected pictures.
N • Pressing DISP/BACK cancels deletion; note that any pictures deleted
before the button was pressed cannot be recovered.
• If a message appears stating that the selected images are part of a
DPOF print order, press MENU/OK to delete the pictures.
191
Playback and the Playback Menu
2
7
CROP
Create a cropped copy of the current picture.
Playback and the Playback Menu
1
2
3
Display the desired picture.
4
5
Press MENU/OK to display a confirmation dialog.
Select CROP in the playback menu.
Use the front command dial to zoom in and out and press the
focus stick (focus lever) up, down, left, or right to scroll the
picture until the desired portion is displayed.
Press MENU/OK again to save the cropped copy to a separate
file.
N • The higher the zoom ratio, the smaller the number of pixels in the
cropped copy.
• If the size of the final copy will be a, YES will be displayed in yellow.
• All copies have an aspect ratio of 3∶2.
7
192
The Playback Menu
RESIZE
Create a small copy of the current picture.
1
2
3
Display the desired picture.
4
Press MENU/OK again to save the resized copy to a separate
file.
Select RESIZE in the playback menu.
Highlight a size and press MENU/OK to display a confirmation
dialog.
Playback and the Playback Menu
N The sizes available vary with the size of the original image.
7
193
PROTECT
Protect pictures from accidental deletion. Highlight one of the
following options and press MENU/OK.
Option
FRAME
SET ALL
RESET ALL
Description
Protect selected pictures. Press the focus stick (focus lever) left or
right to view pictures and press MENU/OK to select or deselect.
Press DISP/BACK when the operation is complete.
Protect all pictures.
Remove protection from all pictures.
Playback and the Playback Menu
O Protected pictures will be deleted when the memory card is formatted.
N Protecting images currently selected for upload to paired smartphones or tablets removes upload marking.
7
194
The Playback Menu
IMAGE ROTATE
Rotate pictures.
1
2
3
4
Select ON for D SCREEN SET-UP > AUTOROTATE PB.
5
Press MENU/OK. The picture will automatically be displayed in
the selected orientation whenever it is played back on the
camera.
Display the desired picture.
Select IMAGE ROTATE in the playback menu.
Press the focus stick (focus lever) down to rotate the picture
90° clockwise, up to rotate it 90° counterclockwise.
tating pictures.
• The camera may not be able to rotate pictures created with other
devices. Pictures rotated on the camera will not be rotated when
viewed on a computer or on other cameras.
• Pictures taken with D SCREEN SET-UP > AUTOROTATE PB are automatically displayed in the correct orientation during playback.
Playback and the Playback Menu
N • Protected pictures cannot be rotated. Remove protection before ro-
7
195
RED EYE REMOVAL
Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will be processed to create
a copy with reduced red-eye.
1
2
3
Display the desired picture.
Select RED EYE REMOVAL in the playback menu.
Press MENU/OK.
N • Results vary depending on the scene and the camera’s success in dePlayback and the Playback Menu
tecting faces.
• The amount of time needed to process the image varies with the
number of faces detected.
• Red eye cannot be removed from pictures that have already been
processed using red-eye removal, which are indicated by a e icon
during playback.
• Red eye removal cannot be performed on RAW images.
7
196
The Playback Menu
VOICE MEMO SETTING
Add a voice memo to the current photograph.
1
2
3
Select ON for VOICE MEMO SETTING in the playback menu.
Display a photo to which you wish to add a voice memo.
Press and hold the center of the front command dial to record the memo. Recording ends after 30 s or when you release the dial.
N • The new memo will be recorded over any existing memos.
Playing Voice Memos
Pictures with voice memos are indicated by q icons during playback.
• To play the memo, press and hold the AEL/AFL button.
• A progress bar will be displayed while the memo plays back.
• Volume can be adjusted by pressing MENU/OK to pause playback and then
pressing the focus stick (focus lever) up or down to adjust the volume.
Press MENU/OK again to resume playback. Volume can also be adjusted using D SOUND SET-UP > PLAYBACK VOLUME.
Playback and the Playback Menu
• Voice memos cannot be added to protected pictures.
• Deleting the picture also deletes the memo.
7
197
RATING
Rate pictures using stars.
1
2
Select RATING in the playback menu.
Use the focus lever (focus stick) to choose a picture and the
front command dial to choose a rating of from 0 to 5 stars
(“I”).
N • The rating dialog can also be displayed by pressing the AEL/AFL button
in single-frame, nine-frame, or hundred-frame playback.
Playback and the Playback Menu
• Ratings cannot be applied to:
- Protected pictures
- Movies
- “Gift” pictures (pictures taken with other cameras)
7
198
The Playback Menu
IMAGE TRANSFER ORDER
Select photos for upload to a paired smartphone or tablet.
1
Select IMAGE TRANSFER ORDER > SELECT FRAMES in the
playback menu.
2
Highlight photos and press MENU/OK to select or deselect. Repeat until all the desired photos have been selected.
3
Press DISP/BACK to exit to playback.
N If ON is selected for both D CONNECTION SETTING > Bluetooth
N • Image transfer orders can contain a maximum of 999 pictures.
• The following cannot be selected for upload:
- Protected pictures
- Movies
- RAW images
- “Gift” pictures (pictures taken with other cameras)
• If PAIRING/TRANSFER ORDER is selected for D CONNECTION
SETTING > GENERAL SETTINGS > r BUTTON SETTING, the IMAGE
TRANSFER ORDER dialog can be displayed by pressing the Fn button.
• To remove upload marking from all pictures in the current order, select IMAGE TRANSFER ORDER > RESET ORDER.
• If ON is selected for D CONNECTION SETTING > Bluetooth
SETTINGS > AUTO IMAGE TRANSFER, photos will automatically be
marked for upload as they are taken.
199
Playback and the Playback Menu
SETTINGS > Bluetooth ON/OFF and AUTO IMAGE TRANSFER,
upload will begin shortly after you exit to playback or turn the
camera off.
7
xF WIRELESS COMMUNICATION
Connect to smartphones running the latest version of the FUJIFILM
Camera Remote app. The smartphone can then be used to:
• Control the camera and take pictures remotely
• Receive pictures uploaded from the camera
• Browse the pictures on the camera and download selected pictures
• Upload location data to the camera
N • For downloads and other information, visit:
Playback and the Playback Menu
7
http://app.fujifilm-dsc.com/en/camera_remote/
WIRELESS COMMUNICATION is selected for D CONNECTION
SETTING > GENERAL SETTINGS > r BUTTON SETTING, you can
connect to the smartphone by pressing the Fn button.
• If
SLIDE SHOW
View pictures in an automated slide show. Press MENU/OK to start
and press the focus stick (focus lever) right or left to skip ahead
or back. Press DISP/BACK at any time during the show to view onscreen help. The show can be ended at any time by pressing
MENU/OK.
N The camera will not turn off automatically while a slide show is in
progress.
200
The Playback Menu
PHOTOBOOK ASSIST
Create books from your favorite photos.
Creating a Photobook
1 Select NEW BOOK for C PLAY BACK MENU > PHOTOBOOK
ASSIST.
2
Scroll through the images and press the focus stick (focus lever) up to select or deselect. Press MENU/OK to exit when the
book is complete.
for photobooks.
• The first picture selected becomes the cover image. A different
picture can be selected at any time.
3
Highlight COMPLETE PHOTOBOOK and press MENU/OK (to select all photos for the book, choose SELECT ALL). The new
book will be added to the list in the photobook assist menu.
N • Books can contain up to 300 pictures.
• Books that contain no photos are automatically deleted.
Playback and the Playback Menu
N • Neither photographs a or smaller nor movies can be selected
7
201
Viewing Photobooks
Highlight a book in the photobook assist menu and press MENU/OK
to display the book, then press the focus stick (focus lever) left or
right to scroll through the pictures.
Playback and the Playback Menu
Editing and Deleting Photobooks
Display the photobook and press MENU/OK. The following options
will be displayed; select the desired option and follow the onscreen instructions.
• EDIT: Edit the book as described in “Creating a Photobook”.
• ERASE: Delete the book.
PC AUTO SAVE
Upload pictures from the camera to a computer running the
latest version of FUJIFILM PC AutoSave (note that you must first
install the software and configure the computer as a destination
for images copied from the camera).
N For downloads and other information, visit:
http://app.fujifilm-dsc.com/en/pc_autosave/
7
202
The Playback Menu
PRINT ORDER (DPOF)
Create a digital “print order” for DPOF-compatible printers.
1
2
Select C PLAY BACK MENU > PRINT ORDER (DPOF).
3
Display a picture you wish to include in or remove from the
print order.
4
Press the focus stick (focus lever) up
or down to choose the number of
copies (up to 99).
Select WITH DATE s to print the date of recording on pictures, WITHOUT DATE to print pictures without dates, or
RESET ALL to remove all pictures from the print order before
proceeding.
Total number
of prints
Number of copies
Playback and the Playback Menu
N • To remove a picture from the order, press the focus stick down
7
PRINT ORDER (DPOF)
DPOF: 00001
01 SHEETS
FRAME
SET
until the number of copies is 0.
• Repeat steps 3–4 to complete the print order.
5
The total number of prints is displayed in the monitor. Press
MENU/OK to exit.
N • The pictures in the current print order are indicated by a u icon
during playback.
• Print orders can contain a maximum of 999 pictures from a single
memory card.
• If a memory card is inserted containing a print order created by an-
other camera, you will need to delete the order before creating as
described above.
203
instax PRINTER PRINT
To print pictures to optional Fujifilm instax SHARE printers, first select D CONNECTION SETTING > instax PRINTER CONNECTION
SETTING and enter the instax SHARE printer name (SSID) and
password, then follow the steps below.
1
2
Playback and the Playback Menu
7
Turn the printer on.
Select C PLAY BACK MENU > instax
PRINTER PRINT. The camera will connect to the printer.
PRINTER PRINT
instax-12345678
CONNECTING
FUJIFILM-CAMERA-1234
CANCEL
3
Use the focus stick (focus lever) to
display the picture you want to print,
then press MENU/OK. The picture will
be sent to the printer and printing
will start.
PRINTER PRINT
100-0020
SET
instax-12345678
CANCEL
N • Pictures taken with other cameras cannot be printed.
• The area printed is smaller than the area visible in the LCD
monitor.
• The displays may vary depending on the printer connected.
204
The Playback Menu
DISP ASPECT
Choose the aspect ratio used for the display of still pictures on
High Definition (HD) devices (this option is available only when
an HDMI cable is connected).
Options
3:2
N Choose 16 : 9 to display photos with an aspect ratio of 16 : 9 full screen.
The pictures will be displayed full screen with tops and bottoms
cropped out.
Playback and the Playback Menu
16 : 9
7
205
MEMO
206
The Setup Menus
207
USER SETTING
Adjust basic camera settings.
To access basic camera settings, press
MENU/OK, select the D (SET UP) tab, and
choose USER SETTING.
USER SETTING
FORMAT
DATE/TIME
TIME DIFFERENCE
a
MY MENU SETTING
MY MENU SETTING
SENSOR CLEANING
SOUND & FLASH
EXIT
FORMAT
To format a memory card:
1
2
The Setup Menus
8
Select D USER SETTING > FORMAT in the D (SET UP) tab.
A confirmation dialog will be displayed. To format the memory card,
highlight OK and press MENU/OK.
FORMAT
FORMAT OK?
OK
CANCEL
N To exit without formatting the memory card, select CANCEL or
press DISP/BACK.
O • All data—including protected pictures—will be deleted from the
memory card. Be sure important files have been copied to a computer or other storage device.
• Do not open the battery-chamber cover during formatting.
208
USER SETTING
DATE/TIME
To set the camera clock:
1
2
Select D USER SETTING > DATE/TIME in the D (SET UP) tab.
3
Press MENU/OK to set the clock.
Press the focus stick (focus lever) left or right to highlight the
year, month, day, hour, or minute and press up or down to
change. To change the order in which the year, month, and
day are displayed, highlight the date format and press the
focus stick up or down.
TIME DIFFERENCE
Switch the camera clock instantly from your home time zone to
the local time at your destination when traveling. To specify the
difference between your local and home time zone:
Highlight g LOCAL and press MENU/OK.
Use the focus stick (focus lever) to choose the time difference
between local time and your home time zone. Press MENU/OK
when settings are complete.
To set the camera clock to local time, highlight g LOCAL and
press MENU/OK. To set the clock to the time in your home time
zone, select h HOME.
Options
g LOCAL
h HOME
N If g LOCAL is selected, g will be displayed in yellow for about three
seconds when the camera is turned on.
209
The Setup Menus
1
2
8
Qa
Choose a language.
x MY MENU SETTING
Edit the items listed in the E (MY MENU) tab, a personalized custom menu of frequently-used photo menu options (P 245).
F MY MENU SETTING
Edit the items listed in the E (MY MENU) tab, a personalized custom menu of frequently-used movie menu options (P 245).
The Setup Menus
8
210
USER SETTING
SENSOR CLEANING
Remove dust from the camera image sensor.
Option
OK
Description
Clean the sensor immediately.
Sensor cleaning will be performed when the camera is
WHEN SWITCHED ON
turned on.
Sensor cleaning will be performed when the camera turns
WHEN SWITCHED OFF off (sensor cleaning is not however performed if the camera turns off in playback mode).
N Dust that cannot be removed using sensor cleaning can be removed
using a blower (P 313).
SOUND & FLASH
Select OFF to disable the speaker, flash, illuminator, and self-timer lamp in situations in which camera sounds and lights may be
unwelcome.
The Setup Menus
Options
ON
OFF
8
211
USER SETTING
RESET
Reset shooting or setup menu options to default values.
1
Highlight the desired option and press MENU/OK.
Option
Description
Reset all photo menu settings other than custom white
STILL MENU RESET balance and custom settings banks created using EDIT/
SAVE CUSTOM SETTING to default values.
Reset all settings other than custom white balance opMOVIE MENU RESET
tions selected using F WHITE BALANCE.
Reset all setup menu settings other than DATE/TIME,
TIME DIFFERENCE, COPYRIGHT INFO, and conSET-UP RESET
nection-related CONNECTION SETTING options to
default values.
2
A confirmation dialog will be displayed; highlight OK and
press MENU/OK.
The Setup Menus
REGULATORY
To view electronic copies of the product model number, and
other certificates, select D USER SETTING > REGULATORY in the
setup menu.
8
212
SOUND SETTING
Make changes to camera sounds.
To access sound settings, press MENU/OK,
select the D (SET UP) tab, and choose
SOUND SET-UP.
SOUND SETTING
AF BEEP VOL.
SELF-TIMER BEEP VOL.
OPERATION VOL.
SHUTTER VOLUME
SHUTTER SOUND
PLAYBACK VOLUME
EXIT
AF BEEP VOL.
Choose the volume of the beep that sounds when the camera
focuses. The beep can be muted by selecting eOFF.
Options
b (high)
c (medium)
d (low)
eOFF (mute)
Options
b (high)
c (medium)
d (low)
eOFF (mute)
The Setup Menus
SELF-TIMER BEEP VOL.
Choose the volume of the beep that sounds while the self-timer
is active. The beep can be muted by selecting eOFF.
8
213
SOUND SETTING
OPERATION VOL.
Adjust the volume of the sounds produced when camera controls are operated. Choose eOFF to disable control sounds.
Options
b (high)
c (medium)
d (low)
eOFF (mute)
SHUTTER VOLUME
Adjust the volume of the sounds produced by the electronic
shutter. Choose eOFF to disable the shutter sound.
Options
b (high)
c (medium)
d (low)
eOFF (mute)
SHUTTER SOUND
Choose the sound made by the electronic shutter.
The Setup Menus
Options
j SOUND 2
i SOUND 1
k SOUND 3
PLAYBACK VOLUME
Adjust the volume for movie playback.
0
8
214
1
2
3
4
Options
5
6
7
8
9
10
SCREEN SETTING
Make changes to display settings.
To access display settings, press MENU/OK,
select the D (SET UP) tab, and choose
SCREEN SET-UP.
SCREEN SETTING
VIEW MODE SETTING
EVF BRIGHTNESS
EVF COLOR
EVF COLOR ADJUSTMENT
LCD BRIGHTNESS
LCD COLOR
LCD COLOR ADJUSTMENT
IMAGE DISP.
EXIT
VIEW MODE SETTING
Adjust settings for eye sensor, EVF (electronic viewfinder), or LCD
monitor view modes (P 14).
EVF BRIGHTNESS
Adjust the brightness of the display in the electronic viewfinder.
MANUAL
Description
Automatic brightness adjustment.
Adjust brightness manually; choose from options between −7
and +5.
EVF COLOR
Adjust the hue of the display in the electronic viewfinder.
−5
−4
−3
−2
−1
Options
0
+1
+2
+3
+4
+5
215
The Setup Menus
Option
AUTO
8
EVF COLOR ADJUSTMENT
Adjust the color of the display in the electronic viewfinder.
1
Adjust colors using the focus stick
(focus lever).
EVF COLOR ADJUSTMENT
SET
2
CANCEL
Press MENU/OK.
LCD BRIGHTNESS
Adjust monitor brightness.
−5
The Setup Menus
8
−4
−3
−2
−1
Options
0
+1
+2
+3
+4
+5
−1
Options
0
+1
+2
+3
+4
+5
LCD COLOR
Adjust monitor hue.
−5
−4
−3
−2
LCD COLOR ADJUSTMENT
Adjust the color of the display in the LCD monitor.
1
2
Adjust colors using the focus stick (focus lever).
Press MENU/OK.
216
SCREEN SETTING
IMAGE DISP.
Choose how long images are displayed after shooting.
Option
CONTINUOUS
1.5 SEC
0.5 SEC
OFF
Description
Pictures are displayed until the MENU/OK button is pressed or the
shutter button is pressed halfway. To zoom in on the active focus
point, press the center of the focus stick (focus lever); press again
to cancel zoom.
Pictures are displayed for the selected time or until the shutter
button is pressed halfway.
Pictures are not displayed after shooting.
N • Colors may differ slightly from those in the final image.
• “Noise” mottling may be visible at high sensitivities.
AUTOROTATE DISPLAYS
Choose whether the indicators in the viewfinder and LCD monitor
rotate to match camera orientation.
The Setup Menus
Options
ON
OFF
8
217
PREVIEW EXP./WB IN MANUAL MODE
Choose whether to enable exposure and/or white balance preview
in manual exposure mode.
Option
Description
PREVIEW EXP./WB Enable exposure and white balance preview.
Preview white balance only. Choose this option in situations in
which exposure and white balance are likely to change during
PREVIEW WB
shooting, as may be the case when you use a flash with an
incandescent monitoring lamp.
Disable exposure and white balance preview. Choose this opOFF
tion when using a flash or on other occasions on which exposure may change when the picture is taken.
NATURAL LIVE VIEW
Choose whether the effects of film simulation, white balance,
and other settings are visible in the monitor.
The Setup Menus
Option
ON
OFF
8
218
Description
The effects of camera settings are not visible in the monitor,
but shadows in low-contrast, back-lit scenes and other hardto-see subjects more visible. Colors and tone will differ from
those in the final picture. The display will however be adjusted
to show the effects of monochrome and sepia settings.
The effects of film simulation, white balance, and other settings
can be previewed in the monitor.
SCREEN SETTING
F-Log VIEW ASSIST
Select ON to display a tone-corrected preview (equivalent to
BT.709) when recording or viewing F-log movies.
Options
ON
OFF
FRAMING GUIDELINE
Choose a framing grid for shooting mode.
F GRID 9
Display
A six-by-four grid.
H HD FRAMING
Frame HD pictures in the
crop shown by the lines at
the top and bottom of the
display.
N Framing guides are not shown at default settings but can be displayed
using D SCREEN SET-UP > DISP. CUSTOM SETTING (P 220).
The Setup Menus
For “rule of thirds” composition.
Option
G GRID 24
8
219
AUTOROTATE PB
Choose ON to automatically rotate “tall” (portrait-orientation)
pictures during playback.
Options
ON
OFF
FOCUS SCALE UNITS
Choose the units used for the focus distance indicator.
Options
METERS
The Setup Menus
8
FEET
APERTURE UNIT FOR CINEMA LENS
Choose whether the camera displays aperture as a T-number
(used for movie camera lenses) or an f/-number (used for still
camera lenses) when an optional FUJINON MKX-series lens is
attached. For information on using cinema lenses, see the documentation provided with the lens.
Option
T NUMBER
F NUMBER
Description
A measure of lens aperture commonly used by cinematographers. Lens transmittance is taken into account to better calculate exposure.
A measure of lens aperture commonly used by photographers.
Lens transmittance is assumed to be 100%, meaning that the
same aperture may produce different exposures depending on
the lens.
DISP. CUSTOM SETTING
Choose the items shown in the standard indicator display
(P 17).
220
SCREEN SETTING
LARGE INDICATORS MODE(EVF)
Select ON to display large indicators in the electronic viewfinder. The indicators displayed can be selected using D SCREEN
SET-UP > LARGE INDICATORS DISP. SETTING.
OFF
ON
O Some
icons are not displayed when ON is selected for LARGE
INDICATORS MODE(EVF) (P 11).
N If LARGE INDICATORS MODE is assigned to a function button, the
button can be used to toggle LARGE INDICATORS MODE on (ON)
and off (OFF) (P 253).
The Setup Menus
LARGE INDICATORS MODE(LCD)
Select ON to display large indicators in the LCD monitor. The indicators displayed can be selected using D SCREEN SET-UP >
LARGE INDICATORS DISP. SETTING.
8
OFF
ON
O Some
icons are not displayed when ON is selected for LARGE
INDICATORS MODE(LCD) (P 13).
N If LARGE INDICATORS MODE is assigned to a function button, the
button can be used to toggle LARGE INDICATORS MODE on (ON)
and off (OFF) (P 253).
221
LARGE INDICATORS DISP. SETTING
Choose the indicators displayed when
ON is selected for D SCREEN SET-UP >
LARGE INDICATORS MODE(EVF) or
LARGE INDICATORS MODE(LCD).
Option
A Expo. DISP.
B d Scale
C L1, L2, L3, L4
D R1, R2, R3, R4
The Setup Menus
8
LARGE INDICATORS DISP. SETTING
222
Scale
Description
Choose the items listed at the bottom of the display.
Selected items are indicated by check marks (R); to
deselect, highlight the check marks and press MENU/OK.
Select ON to display the exposure indicator.
Choose up to four large icons for display on the left side
of the screen.
Choose up to four large icons for display on the right
side of the screen.
INFORMATION CONTRAST ADJ.
Adjust display contrast.
Option
HIGH CONTRAST
STANDARD
LOW CONTRAST
DARK AMBIENT LIGHTING
Expo. DISP.
Description
High contrast.
Normal contrast.
Low contrast.
Contrast adjusted for dim ambient lighting.
SCREEN SETTING
x Q MENU BACKGROUND
Choose the background color used for the quick menu when it is
displayed during still photography.
Options
TRANSPARENT
BLACK
F Q MENU BACKGROUND
Choose the background color used for the quick menu when it is
displayed during movie recording.
Options
TRANSPARENT
BLACK
The Setup Menus
8
223
BUTTON/DIAL SETTING
Access options for camera controls.
To access control options, press MENU/OK,
select the D (SET UP) tab, and choose
BUTTON/DIAL SETTING.
BUTTON/DIAL SETTING
FOCUS LEVER SETTING
EDIT/SAVE QUICK MENU
EDIT/SAVE QUICK MENU
FUNCTION (Fn) SETTING
COMMAND DIAL SETTING
SHUTTER AF
SHUTTER AE
SHOOT WITHOUT LENS
EXIT
FOCUS LEVER SETTING
Choose the functions performed by pressing the center of the focus stick (focus lever) or by pressing the stick up, down, left, or right.
PUSH
Option
OFF
The Setup Menus
8
Description
Pressing the center of the stick has no effect.
Press the center of the stick to view a focus-area display
where you can choose the focus area. If FACE DETECTION
EDIT FOCUS AREA
ON is selected for FACE/EYE DETECTION SETTING, Intelligent Face Detection will be temporarily disabled.
Press the center of the stick to zoom in on the active focus
area (P 76). If FACE DETECTION ON is selected for
ZOOM
FACE/EYE DETECTION SETTING, Intelligent Face Detection will be temporarily disabled.
224
BUTTON/DIAL SETTING
TILT o
Option
OFF
DIRECT AF POINT
SELECTION
EDIT FOCUS AREA
DIRECT AF POINT
SELECTION/FACE
SELECT
Description
Pressing the stick up, down, left, or right has no effect.
Choose the focus area without leaving the shooting display.
Press the stick up, down, left, or right to view a focus-area
display and choose the focus area.
Choose the focus area without leaving the shooting display. If FACE DETECTION ON is selected for FACE/EYE
DETECTION SETTING, you can also choose the face used
for focus.
x EDIT/SAVE QUICK MENU
Choose the items displayed in the quick menu during still photography (P 250).
FUNCTION (Fn) SETTING
Choose the roles played by the function buttons (P 253).
The Setup Menus
F EDIT/SAVE QUICK MENU
Choose the items displayed in the quick menu when filming
movies (P 250).
8
225
COMMAND DIAL SETTING
Choose the roles played by the front command dial. You can
press the center of the dial to cycle through roles in the order
FRONT COMMAND DIAL 1, FRONT COMMAND DIAL 2, and FRONT
COMMAND DIAL 3.
Option
FRONT COMMAND
DIAL 1
FRONT COMMAND
DIAL 2
Description
Assign shutter speed (S.S. (PROGRAM SHIFT)) or aperture (APERTURE) 1 to FRONT COMMAND DIAL 1.
Assign shutter speed (S.S. (PROGRAM SHIFT)), aperture (APERTURE) 1, exposure compensation (EXPOSURE
COMPENSATION) 2, sensitivity (ISO), or no role (NONE)
FRONT COMMAND to FRONT COMMAND DIAL 2 or FRONT COMMAND
DIAL 3
DIAL 3.
1 Aperture set to A (auto) and lens equipped with aperture ring or COMMAND
selected for D BUTTON/DIAL SETTING > APERTURE RING SETTING (A).
2 Exposure compensation dial rotated to C.
The Setup Menus
N COMMAND DIAL SETTING can also be accessed by pressing and
holding the center of the front command dial.
8
226
BUTTON/DIAL SETTING
SHUTTER AF
Choose whether the camera focuses when the shutter button is
pressed halfway.
Option
Description
AF-S
• ON: Focus locks when the shutter button is pressed halfway.
• OFF: No focus operation is performed when the shutter button is
pressed halfway.
• ON: The camera focuses while the shutter button is pressed halfAF-C
way.
• OFF: No focus operation is performed when the shutter button is
pressed halfway.
SHUTTER AE
If ON is selected, exposure will lock while the shutter button is
pressed halfway.
N Select OFF to allow the camera to adjust exposure before each shot
SHOOT WITHOUT LENS
Choose ON to enable the shutter release when no lens is attached.
The Setup Menus
taken in burst mode.
Options
ON
OFF
8
227
SHOOT WITHOUT CARD
Choose whether the shutter can be released without a memory
card inserted in the camera.
Option
Description
When no memory card is inserted, the shutter can be released
to test camera function and the shooting and setup menus can
be displayed.
The shutter is disabled if no memory card is inserted, preventing
accidental loss of pictures taken without a memory card.
ON
OFF
FOCUS RING
Choose the direction in which the focus ring is rotated to increase the focus distance.
Options
X CW (clockwise)
The Setup Menus
8
Y CCW (counterclockwise)
FOCUS RING OPERATION
Choose how the camera adjusts focus in response to the movement of the focus ring.
Option
NONLINEAR
LINEAR
228
Description
Focus is adjusted at the same rate as the ring is rotated.
Focus is adjusted linearly according to the amount the ring is rotated, but the focusing speed is unaffected by the speed the ring
is rotated.
BUTTON/DIAL SETTING
AE/AF-LOCK MODE
This option determines the behavior of the button to which
exposure and/or focus lock is assigned.
Option
Description
AE&AF ON WHEN
Exposure and/or focus will lock while the button is pressed.
PRESSING
AE&AF ON/OFF Exposure and/or focus will lock when the button is pressed and remain locked until it is pressed again.
SWITCH
AWB-LOCK MODE
Choose the behavior of function buttons assigned auto white
balance (AWB) lock. Auto white balance lock is used to lock white
balance at the value metered by the camera when WA WHITE
PRIORITY, AUTO, or AA AMBIENCE PRIORITY is selected for
white balance.
APERTURE RING SETTING (A)
Choose whether the front command dial can be used to adjust
aperture when the lens aperture ring is set to A (auto); when aperture adjustment via the front command dial is enabled, aperture can be adjusted by setting the shutter speed dial to A, pressing the center of the front command dial to cycle to APERTURE,
and then rotating the dial.
Option
AUTO
COMMAND
Description
The camera adjusts aperture automatically.
Aperture can be adjusted using the front command dial.
229
The Setup Menus
Option
Description
AWB ON WHEN
Auto white balance locks while the button is pressed.
PRESSING
AWB ON/OFF Press the button once to lock auto white balance and again to end
the lock.
SWITCH
8
APERTURE SETTING
Choose the method used to adjust aperture when using lenses
with no aperture rings.
Option
AUTO +
o MANUAL
AUTO
MANUAL
Description
To choose the aperture, set the shutter speed dial to A, press the
center of the front command dial to cycle to APERTURE, and then
rotate the dial. Rotate past minimum aperture to choose A (auto).
Aperture is selected automatically; camera functions in exposure
mode P (program AE) or S (shutter-priority AE).
Rotate the front command dial to choose the aperture; camera
functions in exposure mode A (aperture-priority AE) or M (manual).
TOUCH SCREEN SETTING
Enable or disable touch-screen controls.
x TOUCH SCREEN SETTING
The Setup Menus
Option
ON
OFF
Description
The LCD monitor functions as a touch screen during shooting.
Touch controls disabled.
x DOUBLE TAP SETTING
8
Option
ON
OFF
Description
Tap the LCD monitor twice to zoom in on your subject during
shooting.
Touch zoom disabled.
c TOUCH FUNCTION
Option
ON
OFF
230
Description
Enable touch-function gestures.
Disable touch-function gestures.
BUTTON/DIAL SETTING
a TOUCH SCREEN SETTING
Option
ON
OFF
Description
The LCD monitor functions as a touch screen during playback.
Touch controls disabled.
EVF TOUCH SCREEN AREA SETTINGS
Select the area of the LCD monitor used for touch controls while
the viewfinder is active. The area used for touch controls can be
selected from:
Description
All.
Right half.
Top right quarter.
Bottom right quarter.
Left half.
Top left quarter.
Bottom left quarter.
Touch controls disabled.
The Setup Menus
Option
6
0
2
4
1
3
5
OFF
8
231
POWER MANAGEMENT
Adjust power management settings.
To access power management settings,
press MENU/OK, select the D (SET UP) tab,
and choose POWER MANAGEMENT.
POWER MANAGEMENT
AUTO POWER OFF
PERFORMANCE
BOOST SETTING
EXIT
AUTO POWER OFF
Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase
battery life; if OFF is selected, the camera must be turned off
manually.
Options
5 MIN
The Setup Menus
8
232
2 MIN
1 MIN
30 SEC
15 SEC
OFF
POWER MANAGEMENT
PERFORMANCE
Select BOOST to improve focus and EVF display performance.
Option
BOOST
NORMAL
Description
Boost camera focus and EVF display performance. The battery drains faster than when is NORMAL selected.
Choose for standard focus and EVF display performance
and battery endurance.
BOOST SETTING
Adjust the behavior of the EVF and LCD monitor when BOOST is
selected for PERFORMANCE.
Option
Description
Display brightness is adjusted to make subjects in shadows
LOW LIGHT PRIORITY
easier to see. Motion blur may cause ghosting.
RESOLUTION PRIORITY Display resolution is increased to make details easier to see.
The Setup Menus
8
233
SAVE DATA SETTING
Make changes to file management settings.
To access file management settings,
press MENU/OK, select the D (SET UP) tab,
and choose SAVE DATA SET-UP.
SAVE DATA SETTING
FRAME NO.
SAVE ORG IMAGE
EDIT FILE NAME
SELECT FOLDER
COPYRIGHT INFO
EXIT
FRAME NO.
Frame number
New pictures are stored in image files named
using a four-digit file number assigned by
adding one to the last file number used. The
File
file number is displayed during playback as Directory
number number
shown. FRAME NO. controls whether file numbering is reset to 0001 when a new memory card is inserted or
the current memory card is formatted.
The Setup Menus
8
Option
CONTINUOUS
RENEW
Description
Numbering continues from the last file number used or the first
available file number, whichever is higher. Choose this option to
reduce the number of pictures with duplicate file names.
Numbering is reset to 0001 after formatting or when a new
memory card is inserted.
N • If the frame number reaches 999-9999, the shutter release will be
disabled. Format the memory card after transferring to a computer
any pictures you wish to keep. Next, reset frame numbering to 1000001 by inserting a formatted memory card, selecting RENEW for
FRAME NO., and taking a picture. You can then set FRAME NO. to
CONTINUOUS once more and continue shooting.
• Selecting D USER SETTING > RESET does not reset the file number.
• Frame numbers for pictures taken with other cameras may differ.
234
SAVE DATA SETTING
SAVE ORG IMAGE
Choose ON to save unprocessed copies of pictures taken using
RED EYE REMOVAL.
Options
ON
OFF
EDIT FILE NAME
Change the file name prefix. sRGB images use a four-letter prefix
(default “DSCF”), Adobe RGB images a three-letter prefix (“DSF”)
preceded by an underscore.
Option
sRGB
AdobeRGB
Default prefix
DSCF
_DSF
Sample file name
ABCD0001
_ABC0001
The Setup Menus
8
235
SAVE DATA SETTING
SELECT FOLDER
Create folders and choose the folder used to store subsequent
pictures.
Option
SELECT FOLDER
CREATE FOLDER
Description
To choose the folder in which subsequent pictures will be
stored, press the focus stick (focus lever) up or down to
highlight an existing folder and press MENU/OK.
Enter a five-character folder name. The new folder will be
created with the next picture you take and subsequent
pictures will be stored in that folder.
COPYRIGHT INFO
Copyright information, in the form of Exif tags, can be added to
new images as they are taken. Changes to copyright information
are reflected only in images taken after the changes are made.
The Setup Menus
Option
Description
DISP COPYRIGHT INFO View the current copyright information.
ENTER AUTHOR’S INFO Enter the creator’s name.
ENTER COPYRIGHT INFO Enter the name of the copyright holder.
Delete the current copyright information. This change applies
DELETE COPYRIGHT INFO only to images taken after this option is selected; copyright
information recorded with existing images is not affected.
8
236
CONNECTION SETTING
Adjust settings for connection to other devices.
To access connection settings, press
MENU/OK, select the D (SET UP) tab, and
choose CONNECTION SETTING.
CONNECTION SETTING
Bluetooth SETTINGS
PC AUTO SAVE
PRINTER CONNECTION SETTING
CONNECTION MODE
USB POWER SUPPLY SETTING
GENERAL SETTINGS
INFORMATION
RESET WIRELESS SETTING
EXIT
N
For more information on wireless connections, visit:
http://fujifilm-dsc.com/wifi/
Bluetooth SETTINGS
Adjust Bluetooth settings.
Option
PAIRING
REGISTRATION
237
The Setup Menus
Description
Pair the camera with a smartphone running the FUJIFILM Camera
Remote app.
Choose a connection from a list of devices with which the
SELECT PAIRING
camera has been paired using PAIRING REGISTRATION.
DESTINATION
Select NO CONNECTION to exit without connecting.
Delete pairing information for selected devices. Choose the deDELETE PAIRING
vice in the device list. The selected device will also be removed
REG.
from the devices listed in SELECT PAIRING DESTINATION.
• ON: The camera automatically establishes a Bluetooth conBluetooth ON/OFF nection with paired devices when turned on.
• OFF: The camera does not connect via Bluetooth.
• ON: Mark photos for upload as they are taken. Mark JPEG
AUTO IMAGE
photos for upload as they are taken.
TRANSFER
• OFF: Photos are not marked for upload as they are taken.
Choose whether to synchronize the camera to the time and/or
location provided by a paired smartphone.
SMARTPHONE • LOCATION&TIME: Synchronize the time and location.
SYNC. SETTING • LOCATION: Synchronize the location.
• TIME: Synchronize the time.
• OFF: Synchronization off.
8
N • Install the latest version of the FUJIFILM Camera Remote app on your
smartphone or tablet before pairing the device with your camera or
uploading images.
• When ON is selected for both Bluetooth ON/OFF and AUTO IMAGE
TRANSFER or images are currently selected for upload using the IMAGE
TRANSFER ORDER option in the C (playback) menu, upload to paired
devices will begin shortly after you exit to playback or turn the camera
off. IMAGE TRANSFER ORDER can also be used to select pictures for
upload when AUTO IMAGE TRANSFER is off.
PC AUTO SAVE
Adjust settings for connection to computers via wireless LAN.
Option
PC AUTO SAVE
SETTING
The Setup Menus
8
Description
Choose the method used for connection to computers via a
wireless LAN.
• SIMPLE SETUP: Connect using WPS.
• MANUAL SETUP: Choose the network from a list (SELECT
FROM NETWORK LIST) or enter the name manually
(ENTER SSID).
DELETE REGISTERED
Remove selected destinations.
DESTINATION PC
DETAILS OF PREVIOUS
View computers to which the camera has recently connected.
CONNECTION
N These settings also apply when pictures are downloaded to a computer using “FUJIFILM PC AutoSave” software.
238
CONNECTION SETTING
instax PRINTER CONNECTION SETTING
Adjust settings for connection to optional Fujifilm instax SHARE
printers.
The Printer Name (SSID) and Password
The printer name (SSID) can be found on the
bottom of the printer; the default password is
“1111”. If you have already chosen a different
password to print from a smartphone, enter
that password instead.
The Setup Menus
8
239
CONNECTION MODE
Adjust settings for connection to external devices.
Option
The Setup Menus
Description
Connecting the camera to a computer via USB automatically
enables data transfer mode, allowing data to be copied to
USB CARD READER
the computer. The camera functions normally when not connected.
The camera can be used as a webcam when connected to a
X WEBCAM
computer running FUJIFILM X Webcam.
Connecting the camera to a computer via USB automatically enables USB RAW conversion/backup restore mode. The
camera functions normally when not connected.
USB RAW CONV. (requires FUJIFILM X RAW STUDIO): Use the camUSB RAW CONV./ •
era’s image processing engine to rapidly convert RAW files
BACKUP RESTORE
to high-quality JPEG images.
• BACKUP RESTORE (requires FUJIFILM X Acquire): Save and load
camera settings. Reconfigure the camera in an instant or
share settings with other cameras of the same type.
N For information on compatible computer software, see “Software for
Use with Your Camera” (P 301).
8
240
CONNECTION SETTING
USB POWER SUPPLY SETTING
Choose whether power is supplied to the camera when it is connected to a computer or other device via a USB cable.
Option
ON
OFF
Description
The camera draws power from the connected device, reducing
the drain on the camera battery.
The camera does not draw power from the connected device.
O The camera cannot draw power from Lightning connections or from
devices that do not supply power. Select OFF before connecting the
camera to such devices. The connection may not be available for data
transfer or the like when ON is selected.
N Regardless of the option selected, the battery will charge while the
camera is off.
The Setup Menus
8
241
CONNECTION SETTING
GENERAL SETTINGS
Adjust settings for connection to wireless networks.
Option
Description
Choose a name (NAME) to identify the camera on the wireless
NAME
network (the camera is assigned a unique name by default).
Choose whether to resize images for upload to smartphones.
RESIZE IMAGE FOR Resizing applies only to the copy uploaded to the smartphone;
SMARTPHONE the original is not affected.
H
• ON: Larger images are resized to H for upload.
• OFF: Images are uploaded at their original size.
Choose whether location data downloaded from a smartphone
GEOTAGGING
are embedded in pictures as they are taken.
LOCATION INFO Display the location data last downloaded from a smartphone.
r BUTTON
SETTING
The Setup Menus
8
Choose the role played by the Fn button during playback.
• s PAIRING/TRANSFER ORDER: The Fn button can be used
for pairing and selecting images for transfer during playback.
• r WIRELESS COMMUNICATION: The Fn button can be
used during playback to establish wireless connections.
INFORMATION
View the camera’s MAC and Bluetooth address.
RESET WIRELESS SETTING
Restore wireless settings to their default values.
242
Shortcuts
243
Shortcut Options
Customize camera controls to suit your style or situation.
Frequently-used options can be added to “my menu” or the
Q menu or assigned to the function buttons or touch function
button flick gestures for direct access:
Shortcut Option
Description
Add frequently-used options to this custom menu,
“My menu”
which can be viewed by pressing MENU/OK and selecting the E (“MY MENU”) tab.
The Q menu is displayed by pressing the Q button.
The Quick Menu Use the Q menu to view or change the options selected for frequently-used menu items.
Use the function (Fn, Q, and AEL/AFL) button for diThe function button
rect access to selected features.
Use touch function button flick gestures (T-Fn1,
Touch-function
T-Fn2, T-Fn3, and T-Fn4) for direct access to selected
gestures
features.
Shortcuts
9
244
P
245
247
253
256
MY MENU
Access a personalized menu of frequently-used options.
To display “my menu”, press MENU/OK in the
shooting display and select the E (MY
MENU) tab.
MY MENU
SELF-TIMER
INTERVAL TIMER SHOOTING
FILM SIMULATION
GRAIN EFFECT
PHOTOMETRY
SHUTTER TYPE
IS MODE
FACE/EYE DETECTION SETTING
EXIT
O The
E tab is only available if options have been assigned to
E MY MENU.
MY MENU SETTING
To choose the items listed in the E (MY MENU) tab:
1
In the setup menu, select D USER
SETTING > x MY MENU SETTING or
F MY MENU SETTING.
MY MENU SETTING
ADD ITEMS
RANK ITEMS
REMOVE ITEMS
N To reorder items, select RANK ITEMS.
To delete items, select REMOVE ITEMS.
2
N
MY MENU SETTING
IMAGE SIZE
IMAGE QUALITY
RAW RECORDING
FILM SIMULATION
MONOCHROMATIC COLOR
GRAIN EFFECT
COLOR CHROME EFFECT
COLOR CHROME FX BLUE
SELECT
Shortcuts
Press the focus stick (focus lever) up
or down to highlight ADD ITEMS and
press MENU/OK. Options that can be
added to “my menu” are highlighted
in blue.
CANCEL
9
Items currently in “my menu” are indicated by check marks.
245
MY MENU
3
Choose a position for the item and
press MENU/OK. The item will be added
to “my menu”.
SELECT ITEM LOCATION
1 IMAGE SIZE
2 IMAGE QUALITY
MOVE
4
5
SAVE
Press MENU/OK to return to the edit display.
Repeat Steps 3 and 4 until all the desired items have been
added.
N “My menu” can contain up to 16 items.
Shortcuts
9
246
The Quick Menu
Use the quick menu for quick access to selected options. To
view the quick menu, press the Q button.
The Quick Menu Display
The quick menu offers different options in photo and movie
modes. At default settings, it contains the following items:
Still photography
SELECT CUSTOM SETTING
SET
LONG PRESS
EDIT/SAVE CUSTOM
Default
G IMAGE QUALITY
H FILM SIMULATION
I SELF-TIMER
J FOCUS MODE
K FACE/EYE DETECTION SETTING
L EVF/LCD BRIGHTNESS
The quick menu shows the options currently selected for items
B–L, which can be changed.
247
Shortcuts
SHOOTING MODE/
SELECT CUSTOM SETTING
B ISO
C WHITE BALANCE
D DYNAMIC RANGE
E HIGH ISO NR
F IMAGE SIZE
A
9
Movie recording
SHOOTING MODE
SET
A SHOOTING MODE
B S.S. (MOVIE OPTIMIZED
CONTROL oL)
C MOVIE MODE RESOLUTION/
ASPECT RATIO
D F FOCUS MODE
Shortcuts
9
END
Default
G MOVIE MODE FRAME RATE
H F WHITE BALANCE
I F FILM SIMULATION
J F FACE/EYE DETECTION
SETTING
APERTURE
(MOVIE
OPTIMIZED
E
K MOVIE MODE BIT RATE
CONTROL oL)
F F ISO
L F WHITE BALANCE COLOR
TEMP. (WHEN k SELECTED)
The quick menu shows the options currently selected for items
B–L, which can be changed.
248
The Quick Menu
Viewing and Changing Settings
1 Press Q to display the quick menu
during shooting.
2
Use the focus stick (focus lever) to
highlight items.
ISO
SET
3
LONG PRESS EDIT/SAVE CUSTOM
Rotate the front command dial to
change.
N To jump to the EDIT/SAVE CUSTOM SETTING menu, press and
hold the Q button when the quick menu is displayed.
Press Q to exit when settings are complete.
N • The quick menu can also be edited using touch controls.
• Using D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING, you
can assign the Q button roles normally reserved for the function
buttons or assign the Q button’s default role to a function button
(P 253).
• To disable the Q (quick menu) button, select NONE for D BUTTON/
DIAL SETTING > FUNCTION (Fn) SETTING > Q BUTTON SETTING.
249
Shortcuts
4
9
Editing the Quick Menu
To choose the items displayed in the quick menu:
1
Press and hold the Q button during
shooting.
Photo or movie EDIT/SAVE QUICK
MENU options will be displayed.
2
Highlight the item currently in the position you wish to edit
and press MENU/OK.
3
Highlight the desired item and press MENU/OK to assign it to
the selected position.
N The quick menus can also be edited using D BUTTON/DIAL SETTING >
x EDIT/SAVE QUICK MENU or F EDIT/SAVE QUICK MENU.
Shortcuts
9
250
The Quick Menu
Available Items (Still Photography)
Choose from:
• IMAGE SIZE
• MF ASSIST
• IMAGE QUALITY
• TOUCH SCREEN MODE
• FILM SIMULATION
• SELF-TIMER
• GRAIN EFFECT
• PHOTOMETRY
• COLOR CHROME EFFECT
• SHUTTER TYPE
• COLOR CHROME FX BLUE
• FLICKER REDUCTION
• DYNAMIC RANGE
• ISO
• D RANGE PRIORITY
• FLASH FUNCTION SETTING
• WHITE BALANCE
• FLASH COMPENSATION
• WHITE BALANCE COLOR TEMP. (WHEN • MOVIE MODE RESOLUTION/ASPECT
k SELECTED)
• HIGHLIGHT TONE
• SHADOW TONE
• COLOR
• SHARPNESS
• CLARITY
• HIGH ISO NR
• FOCUS MODE
• AF MODE
• AF-C CUSTOM SETTINGS
• FACE/EYE DETECTION SETTING
RATIO
• MOVIE MODE FRAME RATE
• MOVIE MODE BIT RATE
• FULL HD HIGH SPEED REC
• INTERNAL/EXTERNAL MIC LEVEL
ADJUSTMENT
• SOUND & FLASH
• EVF/LCD BRIGHTNESS
• EVF/LCD COLOR
• NONE
Shortcuts
N To disable the function button, choose NONE.
9
251
The Quick Menu
Available Items (Movies)
• FILM SIMULATION
• DYNAMIC RANGE
• WHITE BALANCE
• WHITE BALANCE COLOR TEMP.
(WHEN k SELECTED)
• HIGHLIGHT TONE
• SHADOW TONE
• COLOR
• SHARPNESS
• HIGH ISO NR
• FACE/EYE DETECTION SETTING
• MF ASSIST
• TOUCH SCREEN MODE
• PHOTOMETRY
• MOVIE ISO
• MOVIE MODE RESOLUTION/
ASPECT RATIO
• MOVIE MODE FRAME RATE
• MOVIE MODE BIT RATE
• FULL HD HIGH SPEED REC
• FOCUS MODE
• MOVIE AF MODE
• FIX MOVIE CROP MAGNIFICATION C
• S.S. (MOVIE OPTIMIZED
CONTROL oL)
• APERTURE (MOVIE OPTIMIZED
CONTROL oL)
• INTERNAL/EXTERNAL MIC LEVEL
ADJUSTMENT
• SOUND & FLASH
• EVF/LCD BRIGHTNESS
• EVF/LCD COLOR
• NONE
N To disable the function button, choose NONE.
Shortcuts
9
252
Function Controls
Each of the function (Fn, Q, and AEL/AFL) buttons and
touch-function (T-Fn1, T-Fn2, T-Fn3, and T-Fn4) button flick
gestures can be assigned its own role.
The Function Buttons
Assign roles to the function (Fn, Q, and AEL/AFL) buttons for quick
access.
Function Button Defaults
The default assignments are:
Shortcuts
Function buttons
A Q (quick menu) button
B Fn button
C AEL/AFL button
Default
QUICK MENU
WHITE BALANCE
AE/AF LOCK
9
253
Assigning Roles to the Function Buttons
The roles played by the function buttons can be selected using
the D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING option in the setup menu.
Shortcuts
9
• IMAGE SIZE
• IMAGE QUALITY
• RAW
• FILM SIMULATION
• GRAIN EFFECT
• COLOR CHROME EFFECT
• COLOR CHROME FX BLUE
• DYNAMIC RANGE
• D RANGE PRIORITY
• WHITE BALANCE
• CLARITY
• SELECT CUSTOM SETTING
• FOCUS AREA
• FOCUS CHECK
• FOCUS MODE
• AF MODE
• AF-C CUSTOM SETTINGS
• FACE DETECTION ON/OFF
• AF RANGE LIMITER
• FOCUS CHECK LOCK
• SPORTS FINDER MODE
• PRE-SHOT sJ
• SELF-TIMER
• AE BKT SETTING
• FOCUS BKT SETTING
• PHOTOMETRY
• SHUTTER TYPE
• FLICKER REDUCTION
• ISO
• IS MODE
• WIRELESS COMMUNICATION
• FLASH COMPENSATION
• FLASH FUNCTION SETTING
• TTL-LOCK
• MODELING FLASH
• MOVIE RECORDING RELEASE
• FULL HD HIGH SPEED REC
• FIX MOVIE CROP MAGNIFICATION C
• ZEBRA SETTING
• INTERNAL/EXTERNAL MIC LEVEL
ADJUSTMENT
• MOVIE OPTIMIZED CONTROL oL
• VIEW MODE SETTING
• PREVIEW DEPTH OF FIELD
• PREVIEW EXP./WB IN MANUAL MODE
• NATURAL LIVE VIEW
• HISTOGRAM
• ELECTRONIC LEVEL
• LARGE INDICATORS MODE
• F-Log VIEW ASSIST
• AE LOCK ONLY
• AF LOCK ONLY
• AE/AF LOCK
• AF-ON
• AWB LOCK ONLY
• APERTURE SETTING
• PERFORMANCE
• AUTO IMAGE TRANSFER
• SELECT PAIRING DESTINATION
• Bluetooth ON/OFF
• QUICK MENU
• PLAYBACK
• NONE
N To disable the function button, choose NONE.
254
Function Controls
AF-ON
Controls to which AF-ON is assigned can be used for autofocus.
MODELING FLASH
If MODELING FLASH is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the
flash and check for shadows and the like (modeling flash).
TTL-LOCK
If TTL-LOCK is selected, you can press the control to lock flash
output according to the option selected for F FLASH SETTING >
TTL-LOCK MODE (P 150).
Shortcuts
9
255
Touch-Function Gestures
Assign roles to touch-function gestures (T-Fn1, T-Fn2, T-Fn3, or T-Fn4)
for quick access to selected features.
N Touch-function gestures are disabled by default. To enable touch-func-
tion gestures, select ON for D BUTTON/DIAL SETTING > TOUCH
SCREEN SETTING > c TOUCH FUNCTION.
Touch-Function Gesture Defaults
The default assignments for the different gestures are:
Shortcuts
9
A
B
C
D
Touch-Function Gestures
T-Fn1 (flick up)
T-Fn2 (flick left)
T-Fn3 (flick right)
T-Fn4 (flick down)
256
Default
HISTOGRAM
SPORTS FINDER MODE
LARGE INDICATORS MODE
ELECTRONIC LEVEL
Function Controls
Assigning Roles to Touch-Function Gestures
The roles played by touch-function gestures can be selected using the D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING
option in the setup menu.
• IS MODE
• WIRELESS COMMUNICATION
• FLASH COMPENSATION
• FLASH FUNCTION SETTING
• TTL-LOCK
• MODELING FLASH
• FULL HD HIGH SPEED REC
• FIX MOVIE CROP MAGNIFICATION C
• ZEBRA SETTING
• INTERNAL/EXTERNAL MIC LEVEL
ADJUSTMENT
• MOVIE OPTIMIZED CONTROL oL
• VIEW MODE SETTING
• PREVIEW DEPTH OF FIELD
• PREVIEW EXP./WB IN MANUAL MODE
• NATURAL LIVE VIEW
• HISTOGRAM
• ELECTRONIC LEVEL
• LARGE INDICATORS MODE
• F-Log VIEW ASSIST
• APERTURE SETTING
• PERFORMANCE
• AUTO IMAGE TRANSFER
• SELECT PAIRING DESTINATION
• Bluetooth ON/OFF
• QUICK MENU
• PLAYBACK
• NONE
N To disable touch-function gestures, choose NONE.
257
Shortcuts
• IMAGE SIZE
• IMAGE QUALITY
• RAW
• FILM SIMULATION
• GRAIN EFFECT
• COLOR CHROME EFFECT
• COLOR CHROME FX BLUE
• DYNAMIC RANGE
• D RANGE PRIORITY
• WHITE BALANCE
• CLARITY
• SELECT CUSTOM SETTING
• FOCUS AREA
• FOCUS CHECK
• FOCUS MODE
• AF MODE
• AF-C CUSTOM SETTINGS
• FACE DETECTION ON/OFF
• AF RANGE LIMITER
• FOCUS CHECK LOCK
• SPORTS FINDER MODE
• PRE-SHOT sJ
• SELF-TIMER
• AE BKT SETTING
• FOCUS BKT SETTING
• PHOTOMETRY
• SHUTTER TYPE
• FLICKER REDUCTION
• ISO
9
MEMO
258
Peripherals and Optional
Accessories
259
Lenses
The camera can be used with lenses for the FUJIFILM X-mount.
Lens Parts
Peripherals and Optional Accessories
A Hood cap
B Lens hood
C Focus ring
D Aperture ring
E Mounting marks (focal length)
F Aperture ring lock release
G Lens signal contacts
H Front lens cap
I Rear lens cap
N • A XF27mmF2.8 R WR lens is used here for illustrative purposes.
• A hood cap (A) and lens hood (B) are not included with lens kits.
10
260
Lenses
Removing Lens Caps
Remove lens caps as shown.
O Lens caps may differ from those shown.
Peripherals and Optional Accessories
Attaching Lens Hoods
When attached, lens hoods reduce glare
and protect the front lens element.
10
O Be sure to rotate the hood to the final position.
261
Lenses with Aperture Rings
At settings other than A, you can adjust
aperture by rotating the lens aperture
ring (exposure modes A and M).
A 16 11 8 5.6 4 2.8
A 16 11 8 5.6 4
Aperture ring
N • Selecting ON for MOVIE OPTIMIZED CONTROL oL disables the
aperture ring.
• When the aperture ring is set to A, aperture can be adjusted by rotating the command dial (P 226).
• Aperture rings equipped with locks can be unlocked from the A position by holding the lock button while rotating the ring.
Peripherals and Optional Accessories
The Aperture Mode Switch
If the lens has an aperture mode switch, aperture can be adjusted manually by sliding the
switch to Z and rotating the aperture ring.
Aperture ring
Aperture mode switch
10
262
Lenses
Lenses with No Aperture Rings
The method used to adjust aperture
can be selected using D BUTTON/DIAL
SETTING > APERTURE SETTING. When
an option other than AUTO is selected,
aperture can be adjusted using the front
command dial.
N At
default settings, APERTURE is assigned to D BUTTON/DIAL
SETTING > COMMAND DIAL SETTING > FRONT COMMAND DIAL 2.
Lenses with O.I.S. Switches
If the lens supports optical image stabilization (O.I.S.), the image stabilization mode can be chosen in the camera
menus. To activate image stabilization,
slide the O.I.S. switch to ON.
Peripherals and Optional Accessories
O.I.S. switch
10
263
Manual Focus Lenses
Slide the focus ring to the front for autofocus.
For manual focus, slide the focus ring to
the back and rotate it while checking the
results in the camera display. The focus
distance and depth-of-field indicators
can be used to assist manual focus.
O Note that manual focus may not be available in all shooting modes.
Peripherals and Optional Accessories
The Depth-of-Field Indicator
The depth-of-field indicator shows the approximate depth of field (the distance in front of and
behind the focus point that appears to be in
focus). The indicator is displayed in film format.
10
264
Lenses
Lens Care
• Use a blower to remove dust, then gently wipe with a soft, dry
cloth. Any remaining stains can be removed by wiping gently
with a piece of Fujifilm lens-cleaning paper to which a small
amount of lens-cleaning fluid has been applied.
• Replace the front and rear caps when the lens is not in use.
Peripherals and Optional Accessories
10
265
External Flash Units
Use optional external flash units for flash photography.
Some units support high-speed sync (FP) and can be used
at shutter speeds faster than the flash sync speed, while
others can function as commanders controlling remote
units via optical wireless flash control.
O You may be unable to test-fire the flash in some circumstances, for example when camera menus are displayed.
Red-Eye Removal
Red-eye removal is available when an option other than OFF is selected
for F FLASH SETTING > RED EYE REMOVAL and G AF/MF SETTING >
FACE/EYE DETECTION SETTING is FACE DETECTION ON. Red-eye removal minimizes “red-eye” caused when light from the flash is reflected
from the subject’s retinas.
Peripherals and Optional Accessories
Flash Sync Speed
The flash will synchronize with the shutter at shutter speeds of 1⁄180 s or slower.
Optional Flash Units from Fujifilm
The camera can be used with optional Fujifilm shoe-mounted flash units.
Third-Party Flash Units
Do not use third-party flash units that apply over 300 V to the camera hot
shoe.
10
266
External Flash Units
Using an External Flash
1
2
Connect the unit to the camera.
In shooting mode, select FLASH
FUNCTION SETTING in the F (FLASH
SETTING) menu tab. The options
available vary with the flash unit.
FLASH SETTING
FLASH FUNCTION SETTING
RED EYE REMOVAL
TTL-LOCK MODE
LED LIGHT SETTING
COMMANDER SETTING
CH SETTING
EXIT
Menu
EF-X8
SYNC
TERMINAL
COMMANDER
(OPTICAL)
3
Highlight items using the focus stick
(focus lever) and rotate the front
command dial to change the highlighted setting.
268
270
271
274
MODE
EF-X8
ADJUST
4
P
END
Press DISP/BACK to put the changes into effect.
Peripherals and Optional Accessories
SHOE MOUNT
FLASH
Description
Displayed when an optional EF-X8 flash unit is mounted
on the hot shoe and raised.
Adjust settings for flash units connected via the sync
terminal. SYNC TERMINAL is displayed if the EF-X8 is
lowered and either no flash unit, or an incompatible flash
unit, is mounted on the hot shoe.
Displayed when an optional flash unit other than the
EF-X8 is mounted on the hot shoe and turned on.
Displayed if an optional flash unit functioning as a commander for Fujifilm optical wireless remote flash control is
connected and turned on.
10
267
EF-X8
The following settings are available when an optional EF-X8
shoe-mounted flash unit is attached.
MODE
EF-X8
ADJUST
Setting
END
Peripherals and Optional Accessories
Description
Choose from the following options:
• TTL: TTL mode. Adjust flash compensation (B) and choose
a flash mode (C).
• M: The flash fires at the selected output (B) regardless of
subject brightness or camera settings. Output is expressed
in fractions of full power, from ⁄ to ⁄. The desired results
may not be achieved at low values if they exceed the limits
Flash
control
mode
A
of the flash control system; take a test shot and check the
results.
• C (primary flash): Choose if the flash is being used as a primary flash controlling secondly flash units, for example as
part of a studio flash system.
• D (OFF): The EF-X8 does not fire.
B Flash compensation/ Adjust flash level. The options available vary with the flash
control mode (A).
output
10
268
External Flash Units
Setting
C Flash mode (TTL)
D Sync
Peripherals and Optional Accessories
Description
Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected.
• E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon
displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken.
• F (STANDARD): The flash fires with every shot if possible;
flash level is adjusted according to subject brightness. The
flash will not fire if not fully charged when the shutter is
released.
• G (SLOW SYNC.): Combine the flash with slow shutter
speeds when photographing portrait subjects against a
backdrop of night scenery. The flash will not fire if not fully
charged when the shutter is released.
Choose whether the flash is timed to fire immediately after
the shutter opens (H/1ST CURTAIN) or immediately before
it closes (I/2ND CURTAIN). 1ST CURTAIN is recommended in
most circumstances.
10
269
SYNC TERMINAL
SYNC TERMINAL is displayed if the built-in flash is lowered and
either no flash unit, or an incompatible flash unit, is mounted on
the hot shoe.
MODE
SYNC TERMINAL
ADJUST
Setting
END
Peripherals and Optional Accessories
Description
Choose from the following options:
• M: A trigger signal is transmitted via the hot shoe X contacts
when a picture is taken. Choose a shutter speed slower than
A Flash control mode the sync speed; even slower speeds may be required if the
unit uses long flashes or has a slow response time.
• D (OFF): The trigger signal is disabled.
Choose whether the flash is timed to fire immediately after
the shutter opens (H/1ST CURTAIN) or immediately before
B Sync
it closes (I/2ND CURTAIN). 1ST CURTAIN is recommended in
most circumstances.
10
270
External Flash Units
SHOE MOUNT FLASH
The following options are available when an optional
shoe-mounted flash unit is attached and turned on.
MODE
SHOE MOUNT FLASH
ADJUST
END
Setting
Peripherals and Optional Accessories
Description
The flash control mode selected with the flash unit. This can
in some cases be adjusted from the camera; the options available vary with the flash.
• TTL: TTL mode. Adjust flash compensation (B).
• M: The flash fires at the selected output regardless of subject
A Flash control mode brightness or camera settings. Output in some cases can be
adjusted from the camera (B).
• MULTI: Repeating flash. Compatible shoe-mounted flash
units will fire multiple times with each shot.
• D (OFF): The flash does not fire. Some flash units can be
turned off from the camera.
10
271
Setting
Peripherals and Optional Accessories
Description
The options available vary with flash control mode.
• TTL: Adjust flash compensation (the full value may not be
applied if the limits of the flash control system are exceeded). In the cases of the EF-X20, EF-20, and EF-42, the selected value is added to the value selected with the flash unit.
B Flash compensation/ • M/MULTI: Adjust flash output (compatible units only).
output
Choose from values expressed as fractions of full power,
from ⁄ (mode M) or ¼ (MULTI) down to ⁄ in increments
equivalent to ⁄ EV. The desired results may not be achieved
at low values if they exceed the limits of the flash control
system; take a test shot and check the results.
Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected.
• E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon
displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken.
F (STANDARD): The flash fires with every shot if possible;
•
C Flash mode (TTL) flash level is adjusted according to subject brightness. The
flash will not fire if not fully charged when the shutter is
released.
• G (SLOW SYNC.): Combine the flash with slow shutter
speeds when photographing portrait subjects against a
backdrop of night scenery. The flash will not fire if not fully
charged when the shutter is released.
10
272
External Flash Units
Setting
D Sync
E Zoom
G LED light
G Number of flashes *
H Frequency *
Peripherals and Optional Accessories
F Lighting
Description
Control flash timing.
• H (1ST CURTAIN): The flash fires immediately after the shutter opens (generally the best choice).
• I (2ND CURTAIN): The flash fires immediately before the
shutter closes.
• R (AUTO FP(HSS)): High-speed sync (compatible units only).
The camera automatically engages front-curtain highspeed sync at shutter speeds faster than the flash sync
speed. Equivalent to 1ST CURTAIN when MULTI is selected
for flash control mode.
The angle of illumination (flash coverage) for units that support flash zoom. Some units allow the adjustment to be
made from the camera. If AUTO is selected, zoom will automatically be adjusted to match coverage to lens focal length.
If the unit supports this feature, choose from:
• J (FLASH POWER PRIORITY): Gain range by slightly reducing
coverage.
• K (STANDARD): Match coverage to picture angle.
• L (EVEN COVERAGE PRIORITY): Slightly increase coverage for
more even lighting.
Choose how the built-in LED light functions during still photography (compatible units only): as a catchlight (M/CATCHLIGHT),
as an AF-assist illuminator (N/AF ASSIST), or as both a catchlight and an AF-assist illuminator (O/AF ASSIST+CATCHLIGHT).
Choose OFF to disable the LED during photography.
Choose the number of times the flash fires each time the
shutter is released in MULTI mode.
Choose the frequency at which the flash fires in MULTI mode.
* Full value may not be applied if limits of flash control system are exceeded.
10
273
COMMANDER(OPTICAL)
The options will be displayed if the unit is currently functioning
as a commander for Fujifilm optical wireless remote flash control.
MODE
COMMANDER(OPTICAL)
ADJUST
END
Peripherals and Optional Accessories
Fujifilm optical wireless remote flash control offers a choice of
four channels (Channels 1 through 4) for the exchange of optical
signals between the commander and remote flash units. Separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close
proximity.
The flash units can also be placed in up to
three groups (A, B, and C) and flash mode
C
and flash level adjusted separately for
A
each group.
B
10
274
External Flash Units
Setting
A Flash control mode
(group A)
B Flash control mode
(group B)
C Flash control mode
(group C)
output (group A)
E Flash compensation/
output (group B)
F Flash compensation/
output (group C)
Peripherals and Optional Accessories
D Flash compensation/
Description
Choose flash control modes for groups A, B, and C. TTL%
is available for groups A and B only.
• TTL: The units in the group fire in TTL mode. Flash compensation can be adjusted separately for each group.
• TTL%: If TTL% is selected for either group A or B, you can
specify the output of the selected group as a percentage of the other and adjust overall flash compensation
for both groups.
• M: In mode M, the units in the group fire at the selected
output (expressed as a fraction of full power) regardless
of subject brightness or camera settings.
• MULTI: Choosing MULTI for any group sets all the units
in all groups to repeating flash mode. All units will fire
multiple times with each shot.
• D (OFF): If OFF is selected, the units in the group will
not fire.
Adjust flash level for the selected group according to
option selected for flash control mode. Note that the full
value may not be applied if the limits of the flash control
system are exceeded.
• TTL: Adjust flash compensation.
• M/MULTI: Adjust flash output.
• TTL%: Choose the balance between groups A and B and
adjust overall flash compensation.
10
275
Setting
G Flash mode (TTL)
Peripherals and Optional Accessories
H Sync
I Zoom
10
J Lighting
276
Description
Choose a flash mode for TTL flash control. The options
available vary with the shooting mode (P, S, A, or M) selected.
• E (FLASH AUTO): The flash fires only as required; flash
level is adjusted according to subject brightness. A
p icon displayed when the shutter button is pressed
halfway indicates that the flash will fire when the photo
is taken.
• F (STANDARD): The flash fires with every shot if possible; flash level is adjusted according to subject brightness. The flash will not fire if not fully charged when the
shutter is released.
• G (SLOW SYNC.): Combine the flash with slow shutter
speeds when photographing portrait subjects against a
backdrop of night scenery. The flash will not fire if not
fully charged when the shutter is released.
Control flash timing.
• H (1ST CURTAIN): The flash fires immediately after the
shutter opens (generally the best choice).
• I (2ND CURTAIN): The flash fires immediately before the
shutter closes.
• R (AUTO FP(HSS)): High-speed sync (compatible units only).
The camera automatically engages front-curtain highspeed sync at shutter speeds faster than the flash sync
speed. Equivalent to 1ST CURTAIN when MULTI is selected
for flash control mode.
The angle of illumination (flash coverage) for units that support flash zoom. Some units allow the adjustment to be
made from the camera. If AUTO is selected, zoom will automatically be adjusted to match coverage to lens focal length.
If the unit supports this feature, choose from:
• J (FLASH POWER PRIORITY): Gain range by slightly reducing coverage.
• K (STANDARD): Match coverage to picture angle.
• L (EVEN COVERAGE PRIORITY): Slightly increase coverage
for more even lighting.
External Flash Units
Setting
K Commander
K Number of flashes
L Channel
Peripherals and Optional Accessories
L Frequency
Description
Choose the group for units functioning as a commander for Fujifilm optical wireless remote flash control in TTL,
TTL%, or M mode. This option is available only with clipon flash units that support Fujifilm optical wireless remote
flash control.
• Gr A: Assign the commander to group A.
• Gr B: Assign the commander to group B.
• Gr C: Assign the commander to group C.
• OFF: Output from the commander is held to a level that
does not affect the final picture.
Choose the number of times the flash fires each time the
shutter is released in MULTI mode.
Choose the channel used by the commander for communication with the remote flash units. Separate channels
can be used for different flash systems or to prevent interference when multiple systems are operating in close
proximity.
Choose the frequency at which the flash fires in MULTI
mode.
10
277
Handgrips
Using a handgrip makes the camera easier to hold.
The MHG-XE4 handgrip attaches to the tripod socket.
Peripherals and Optional Accessories
10
278
Thumb Rests
Thumb Rests
Using a thumb rest improves your grip and prevents unintended operation of the camera controls.
The TR-XE4 thumb rest attaches to the hot shoe.
No gap
Gap
If the thumb rest connection seems loose, attach the supplied
sheet (A) as shown.
Peripherals and Optional Accessories
Slide the grip all the way into the hot shoe and confirm that there
are no gaps.
10
279
MEMO
280
Connections
281
HDMI Output
Camera shooting and playback displays can be output to
HDMI devices.
Connecting to HDMI Devices
Connect the camera to TVs or other HDMI devices using a
third-party HDMI cable.
1
2
Turn the camera off.
Connect the cable as shown below.
Insert into
HDMI connector
Insert into HDMI Micro
connector (Type D)
Connections
11
3
Configure the device for HDMI input as described in the documentation supplied with the device.
4
Turn the camera on. The contents of the camera display will
be shown on the HDMI device. The camera display turns off
in playback mode (P 283).
O • Making sure the connectors are fully inserted.
• Use an HDMI cable no more than 1.5 m (4.9 ft.) long.
282
HDMI Output
Shooting
Shoot photos and record movies while viewing the scene through
the camera lens on or saving footage to the HDMI device.
N This feature can be used to save 4K and Full HD movies to an HDMI
recorder.
Playback
To start playback, press the camera PLAY button. The camera
monitor turns off and pictures and movies are output to the
HDMI device. Note that the camera volume controls have no effect on sounds played on the TV; use the television volume controls to adjust the volume.
O Some televisions may briefly display a black screen when movie playback begins.
Connections
11
283
Wireless Connections
(Bluetooth®, Wireless LAN/Wi-Fi)
Access wireless networks and connect to computers,
smartphones, or tablets. For more information, visit:
http://fujifilm-dsc.com/wifi/
N In the text that follows, the term “smartphone” is used to refer to both
smartphones and tablets.
Smartphones and Tablets: FUJIFILM Camera Remote
Connect to the camera via Bluetooth or wireless LAN.
N To establish a wireless connection to the camera, you will need to in-
stall the latest version of the FUJIFILM Camera Remote app on your
smartphone or tablet.
FUJIFILM Camera Remote
Once a connection has been established, you can use FUJIFILM Camera
Remote to:
• Control the camera and take pictures remotely
• Receive pictures uploaded from the camera
• Browse the pictures on the camera and download selected pictures
• Upload location data to the camera
• Release the camera shutter
• Update camera firmware
For downloads and other information, visit:
http://app.fujifilm-dsc.com/en/camera_remote/
Connections
11
284
Wireless Connections (Bluetooth®, Wireless LAN/Wi-Fi)
SmartPhones and Tablets: Bluetooth® Pairing
Use D CONNECTION SETTING > Bluetooth SETTINGS > PAIRING
REGISTRATION to pair the camera with smartphones or tablets.
Pairing offers a simple method for downloading photos from the
camera.
N • Photos are downloaded via a wireless connection.
• Once pairing is complete, you will be able to synchronize the camera
clock and location data with the smartphone or tablet (P 237).
• You can choose a connection from up to 7 paired smartphones or
tablets.
Smartphones and Tablets: Wireless LAN
Establish wireless LAN connections to smartphones or tablets using WIRELESS COMMUNICATION in the A SHOOTING SETTING,
B MOVIE SETTING, or C PLAY BACK MENU.
Connections
11
285
Wireless Connections (Bluetooth®, Wireless LAN/Wi-Fi)
Copying Pictures to a Computer: PC AutoSave
Install the latest version of FUJIFILM PC Autosave to your computer to upload pictures from the camera over wireless networks
(Wi-Fi).
FUJIFILM PC AutoSave
For downloads and other information, visit:
http://app.fujifilm-dsc.com/en/pc_autosave/
Computers: Wireless Connections
You can upload pictures from the camera using the PC AUTO
SAVE option in the playback menu.
Connections
11
286
Connecting via USB
The camera can be connected to computers and smartphones via USB.
Connecting to Computers
N Before downloading pictures or taking pictures remotely, connect the
camera to a computer and check that it functions normally.
1
2
Turn the computer on.
3
4
Turn the camera off.
Adjust settings according to how the camera will be used.
For more information, see the following topics:
• “Copying Pictures to a Computer” (P 290)
• “Using Your Camera as a Webcam (FUJIFILM X Webcam)”
(P 290)
• “Converting RAW Images: FUJIFILM X RAW STUDIO” (P 291)
• “Backing up and Restoring Camera Settings (FUJIFILM X
Acquire)” (P 291)
Connect a USB cable.
Connections
11
USB connector (Type-C)
O The USB cable must be no more than 1.5 m (4.9 ft.) long and be
suitable for data transfer.
287
5
6
Turn the camera on.
Choose an application according to the task at hand.
• Image transfer: Use applications provided with your operating system.
• Using your camera as a webcam: Launch FUJFILM X Webcam.
• RAW conversion: Process RAW images using FUJIFILM X RAW
STUDIO. The power of the camera’s image processing engine is used for rapid processing.
• Saving and loading camera settings: Use FUJIFILM X Acquire to
save or load camera settings. Save your preferred settings
to a file in a single operation and copy them to multiple
cameras.
Connections
11
288
Connecting via USB
O • Turn the camera off before disconnecting the USB cable.
• When connecting USB cables, be sure the connectors are fully in-
serted in the correct orientation. Connect the camera directly to the
computer; do not use a USB hub or keyboard.
• Loss of power during transfer could result in loss of data or damage to
the memory card. Insert a fresh or fully-charged battery before connecting the camera.
• If a memory card containing a large number of images is inserted,
there may be a delay before the software starts and you may be unable to import or save images. Use a memory card reader to transfer
pictures.
• Make sure that the indicator lamp is off or lit green before disconnecting the camera.
• Do not disconnect the USB cable while transfer is in progress. Failure
to observe this precaution could result in loss of data or damage to
the memory card.
• Disconnect the camera before inserting or removing memory cards.
• In some cases, it may not be possible to access pictures saved to a
network server using the software in the same way as on a standalone computer.
• Do not immediately remove the camera from the system or disconnect the USB cable once the message stating that copying is in
progress clears from the computer display. If the number of images
copied is very large, data transfer may continue after the message has
ceased to be displayed.
• The user bears all applicable fees charged by the phone company or
Internet service provider when using services that require an Internet
connection.
Connections
11
289
Copying Pictures to a Computer
• Before copying pictures to a computer,
select USB CARD READER for D CONNECTION SETTING > CONNECTION
MODE in the camera menus.
• The software that can be used to copy
pictures varies with your computer operating system.
CONNECTION SETTING
Bluetooth SETTINGS
PC AUTO SAVE
USB CARD
READER
PRINTER
CONNECTION
SETTING
X WEBCAM
CONNECTION MODE
USB RAW CONV./BACKUP RESTORE
USB POWER SUPPLY SETTING
GENERAL SETTINGS
INFORMATION
RESET WIRELESS SETTING
EXIT
Mac OS X/macOS
Pictures can be copied to your computer using Image Capture
(supplied with your computer) or other software.
O Use a card reader to copy files over 4 GB in size.
Windows
Pictures can be copied to your computer using applications supplied with the operating system.
Using Your Camera as a Webcam (FUJIFILM X Webcam)
• Before proceeding, select X WEBCAM
Bluetooth SETTINGS
PC AUTO SAVE
for D CONNECTION SETTING > CONPRINTER CONNECTION SETTING
CONNECTION MODE
NECTION MODE in the camera menus.
USB POWER SUPPLY SETTING
GENERAL SETTINGS
• Launch FUJIFILM X Webcam.
INFORMATION
CONNECTION SETTING
USB CARD READER
X WEBCAM
USB RAW CONV./BACKUP RESTORE
RESET WIRELESS SETTING
EXIT
Connections
N
For more information on FUJIFILM X Webcam, see “Software for
Use with Your Camera” (P 301).
11
290
Connecting via USB
Converting RAW Images: FUJIFILM X RAW STUDIO
• Before proceeding, select USB RAW
Bluetooth SETTINGS
PC AUTO SAVE
CONV./BACKUP RESTORE for D CONPRINTER CONNECTION SETTING
CONNECTION MODE
NECTION SETTING > CONNECTION
USB POWER SUPPLY SETTING
GENERAL SETTINGS
MODE in the camera menus.
INFORMATION
RESET WIRELESS SETTING
• FUJIFILM X RAW STUDIO can be used
to convert RAW images to JPEG or TIFF
images.
CONNECTION SETTING
USB CARD READER
X WEBCAM
USB RAW CONV./BACKUP RESTORE
EXIT
N For more information on FUJIFILM X RAW STUDIO, see “Software for
Use with Your Camera” (P 301).
Backing up and Restoring Camera Settings
(FUJIFILM X Acquire)
• Before proceeding, select USB RAW
CONV./BACKUP RESTORE for D CONNECTION SETTING > CONNECTION
MODE in the camera menus.
• FUJIFILM X Acquire can be used to
backup and restore camera settings.
CONNECTION SETTING
Bluetooth SETTINGS
PC AUTO SAVE
USB CARD
READER
PRINTER
CONNECTION
SETTING
X WEBCAM
CONNECTION
MODE
USB RAW CONV./BACKUP RESTORE
USB POWER SUPPLY SETTING
GENERAL SETTINGS
INFORMATION
RESET WIRELESS SETTING
EXIT
N For
more information on FUJIFILM X Acquire, see “Software for
Use with Your Camera” (P 301).
Connections
11
291
Connecting to Smartphones
To copy pictures to a smartphone, select OFF for D CONNECTION
SETTING > USB POWER SUPPLY SETTING and connect the camera to the phone using a USB cable.
For Customers Using Android Devices
How you will connect the camera depends on the type of USB
connector with which your smartphone is equipped.
Type-C
Ready a cable equipped with connectors matching the USB
(Type-C) connector on the camera.
Third-party USB cable
Type-C connector (male)
Type-C connector (male)
Micro-B
Use a USB on-the-go (OTG) cable.
Supplied USB cable
USB OTG cable
Connections
Type-C connector (male)
Type-A connector (male)
11
O • The smartphone must support USB OTG.
• The
Micro-B connector (male)
Type-A connector (female)
desired results cannot be achieved with a USB Type-C–to–
Mirco-B cable. Use an OTG cable.
292
Connecting via USB
1
Set the camera’s D CONNECTION SETTING > USB POWER
SUPPLY SETTING to OFF.
2
Connect the camera and smartphone using a USB cable.
N If the smartphone asks for permission for an application other
than the “Camera Importer” to access the camera, tap “Cancel” and
move on to the next step.
3
On your smartphone, tap the notification “Connected to USB
PTP”.
4
From the recommended applications, select “Camera
Importer”.
The app will automatically start and allow you to import photos and movies to your smartphone.
N If the message “There is no MTP device connected” appears on the
app, please try again from step 2.
Connections
11
293
Connecting via USB
For Customers Using iOS
An Apple Lightning to USB Camera Adapter is required.
Supplied USB cable
Type-C connector (male)
Apple Lightning to
USB Camera Adapter
Use an Apple Lightning to
USB Camera Adapter
Type-A connector (male)
1
Set the camera’s D CONNECTION SETTING > USB POWER
SUPPLY SETTING to OFF.
2
Connect the camera and smartphone using a USB cable.
Launch the Photos app to import photos and movies to your
smartphone.
O The
desired results cannot be achieved with a USB Type-C–to–
Lightning cable. Use a camera adapter.
Connections
11
294
instax SHARE Printers
Print pictures from your digital camera to instax SHARE
printers.
Establishing a Connection
Select D CONNECTION SETTING > instax PRINTER CONNECTION
SETTING and enter the instax SHARE printer name (SSID) and password.
The Printer Name (SSID) and Password
The printer name (SSID) can be found on the
bottom of the printer; the default password is
“1111”. If you have already chosen a different
password to print from a smartphone, enter
that password instead.
Connections
11
295
instax SHARE Printers
Printing Pictures
1 Turn the printer on.
2
Select C PLAY BACK MENU > instax
PRINTER PRINT. The camera will connect to the printer.
PRINTER PRINT
instax-12345678
CONNECTING
FUJIFILM-CAMERA-1234
CANCEL
3
Use the focus stick (focus lever) to
display the picture you want to print,
then press MENU/OK.
PRINTER PRINT
100-0020
SET
instax-12345678
CANCEL
N • Pictures taken with other cameras cannot be printed.
• The area printed is smaller than the area visible in the LCD
monitor.
• The displays may vary depending on the printer connected.
4
The picture will be sent to the printer and printing will start.
Connections
11
296
Technical Notes
297
Accessories from Fujifilm
The following optional accessories are available from Fujifilm.
For the latest information on the accessories available in your
region, check with your local Fujifilm representative or visit
https://fujifilm-x.com/support/compatibility/cameras/.
Rechargeable Li-ion batteries
NP-W126S: Additional high-capacity NP-W126S rechargeable batteries can be
purchased as required.
Battery chargers
BC-W126S: Replacement battery chargers can be purchased as required. At
+20 °C/+68 °F, the BC-W126S charges an NP-W126S in about 150 minutes.
AC power adapters
AC-9V (requires CP-W126 DC coupler): Use this 100–240 V, 50/60 Hz AC power adapter for
extended shooting and playback or when copying pictures to a computer.
DC couplers
CP-W126: For extended shooting or playback or when using the camera with a
computer, use the CP-W126 to connect the camera to the AC-9V power adapter.
Remote releases
RR-100: Use to reduce camera shake. A third-party adapter that converts a female
three-pin, ⌀2.5 mm connector to a male three-pin, ⌀3.5 mm connector is required for connection to the camera.
Stereo microphones
MIC-ST1: An external microphone for movie recording.
Technical Notes
12
FUJINON lenses
XF-/XC-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM
X-mount.
FUJINON MKX-series lenses: Cinema lenses for the FUJIFILM X-mount.
Macro extension tubes
MCEX-11/16: Attach between the camera and the lens to shoot at high reproduction ratios.
Teleconverters
XF1.4X TC WR: Increases the focal length of the compatible lenses by about 1.4×.
XF2X TC WR: Increases the focal length of the compatible lenses by about 2.0×.
298
Accessories from Fujifilm
Mount adapters
FUJIFILM M MOUNT ADAPTER: Allows the camera to be used with a wide selection
of M-mount lenses.
Body caps
BCP-001: Cover the camera lens mount when no lens is attached.
Technical Notes
Shoe-mounted flash units
EF-X500: In addition to manual and TTL flash control, this clip-on flash unit has a
Guide Number of 50/164 (ISO 100, m/ft.) and supports FP (high-speed sync), allowing it to be used at shutter speeds that exceed the flash sync speed. Featuring
support for the optional EF-BP1 battery pack and Fujifilm optical wireless flash
control, it can be used as a commander or remote flash unit for remote wireless
flash photography.
EF-BP1: A battery pack for EF-X500 flash units. Takes up to 8 AA batteries.
EF-X8: This compact, clip-on flash unit draws power from the camera has a Guide
Number of approximately 8/26 (ISO 100, m/ft.) and can cover the angle of view of
a 16 mm lens (equivalent to 24 mm in 35 mm format).
EF-60: In addition to manual and TTL flash control, this clip-on flash unit has a
Guide Number of 60/197 (ISO 100, m/ft.) and supports FP (high-speed sync), allowing it to be used at shutter speeds that exceed the flash sync speed. It can also
be used as remote flash under the control of an optional EF-W1 wireless commander.
EF-42: This clip-on flash unit has a Guide Number of 42/137 (ISO 100, m/ft.) and
supports manual and TTL flash control.
EF-X20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.) and
supports manual and TTL flash control.
EF-20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.) and
supports TTL flash control (manual flash control is not supported).
EF-W1: With support for the NAS * wireless communication standard developed
by Nissin Japan, this wireless flash commander can be used with optional EF-60
clip-on flash units and other NAS-compliant units.
* NAS is a registered trademark of Nissin Japan Ltd.
12
299
Accessories from Fujifilm
Leather cases
BLC-XE4: A case made from genuine leather. Pictures can be taken and batteries
and memory cards inserted or removed with the camera still in its case.
Grip belts
GB-001: Improves grip. Combine with a hand grip for more secure handling.
Handgrips
MHG-XE4: Makes the camera easier to hold. Pictures can be taken and batteries
and memory cards inserted or removed with the camera still in its case.
Thumb rests
TR-XE4: When inserted into the camera hot shoe, the thumb rest improves your
grip and prevents unintended operation of camera controls.
instax SHARE printers
SP-1/SP-2/SP-3: Connect via wireless LAN to print pictures on instax film.
Technical Notes
12
300
Software for Use with Your Camera
The camera can be used with the following software. For the
latest information on software available from Fujifilm, visit
https://fujifilm-x.com/support/compatibility/cameras/.
FUJIFILM Camera Remote
Establish a wireless connection between your camera and a
smartphone or tablet (P 284).
http://app.fujifilm-dsc.com/en/camera_remote/
FUJIFILM PC AutoSave
Download pictures from your camera over wireless networks
(P 286).
http://app.fujifilm-dsc.com/en/pc_autosave/
RAW FILE CONVERTER EX powered by SILKYPIX
RAW FILE CONVERTER EX powered by SILKYPIX is RAW conversion software from Ichikawa Soft Laboratory Co., Ltd. View RAW
pictures on your computer and convert them into other formats.
RAW FILE CONVERTER EX powered by SILKYPIX is available free of
charge from the Fujifilm website.
https://fujifilm-x.com/support/download/software/raw-file-converterex-powered-by-silkypix/
N “RAW FILE CONVERTER EX powered by SILKYPIX” is supplied by Ichikawa
Soft Laboratory Co., Ltd.
N Visit the Capture One A/S website for the latest support information.
301
Technical Notes
Capture One Express Fujifilm
Capture One Express Fujifilm is image edit software from Capture
One A/S. View RAW pictures on your computer and convert them
into other formats. Capture One Express Fujifilm is available free
of charge from Capture One A/S.
https://www.captureone.com/products-plans/capture-one-express/fujifilm
12
Software for Use with Your Camera
Capture One Pro Fujifilm
Capture One Pro Fujifilm is workflow software from Capture One
A/S. Capture One Pro Fujifilm supports tethered shooting and
the conversion of RAW pictures into other formats.
https://www.captureone.com/explore-features/fujifilm
O Auto download (tethered shooting) is not supported with some cameras.
N
Visit the Capture One A/S website for the latest support information.
FUJIFILM X Acquire
This application for Windows and macOS lets you connect to the
camera via USB or Wi-Fi and automatically download photos to
a specified folder as they are taken, or backup and restore the
camera via USB.
https://fujifilm-x.com/products/software/x-acquire/
O Auto download (tethered shooting) is not supported with some cameras.
FUJIFILM X RAW STUDIO
When the camera is connected to a computer via USB, FUJIFILM
X RAW STUDIO can use the camera’s unique image processing
engine to rapidly convert RAW files to create high-quality images
in other formats.
https://fujifilm-x.com/products/software/x-raw-studio/
Technical Notes
FUJIFILM X Webcam
Connect the camera to a computer via USB to turn it into a webcam.
https://fujifilm-x.com/products/software/x-webcam/
12
302
For Your Safety
IMPORTANT SAFETY INSTRUCTIONS
Instructions: All the safety and operating instructions
• Read Instructions
should be read before the appliance is operated.
Instructions
tructions: The safety and operating instructions
• Retain Ins
should be retained for future reference.
Warnings
ngs: All warnings on the appliance and in the
• Heed Warni
operating instructions should be adhered to.
structions: All operating and use instructions
• Follow InInstructions
should be followed.
Antennas
Outdoor Antenna Grounding: If an outside antenna or cable
system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some
protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code, ANSI/NFPA No.
70, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode.
EXAMPLE OF ANTENNA GROUNDING AS
PER NATIONAL ELECTRICAL CODE
Ground Clamp
Electric Servicee Equipmentt
Antenna Lead
in Wire
AAnntenna
Discharge Unit
D
(NEC
N SECTION
8
810-20)
Ground Clamps
Power Service Grounding Electrode
System (NEC ART 250. PART H)
Grounding
Conductors (NEC
SECTION 810-21)
Technical Notes
Installation
Power Sources: This video product should be operated only
from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your
home, consult your appliance dealer or local power company. For video products intended to operate from battery
power, or other sources, refer to the operating instructions.
Grounding or Polarization: This video product is equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
Alternate Warnings: This video product is equipped with
a three-wire grounding-type plug, a plug having a third
(grounding) pin. This plug will only fit into a grounding-type
power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose
of the grounding type plug.
Overloading: Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
Ventilation: Slots and openings in the cabinet are provided
for ventilation, to ensure reliable operation of the video product and to protect it from overheating, and these openings
must not be blocked or covered. The openings should never
be blocked by placing the video product on a bed, sofa, rug,
or other similar surface.
This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have been adhered to. This video product should never be placed near or
over a radiator or heat register.
Attachments: Do not use attachments not recommended by
the video product manufacturer as they may cause hazards.
Water and Moisture: Do not use this video product near water—for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool,
and the like.
Power-Cord Protection: Power-supply cords should be routed
so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point
where they exit from the appliance.
Accessories: Do not place this video product on an unstable
cart, stand, tripod, bracket, or table. The video product may
fall, causing serious injury to a child or adult, and serious
damage to the appliance. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or sold
with the video product. Any mounting of the appliance
should follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the manufacturer.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance and
cart combination to overturn.
12
303
Power Lines: An outside antenna system should not be locat- Damage Requiring Service: Unplug this video product from
ed in the vicinity of overhead power lines or other electric the wall outlet and refer servicing to qualified service personlight or power circuits, or where it can fall into such power nel under the following conditions:
lines or circuits. When installing an outside antenna system, • When the power-supply cord or plug is damaged
extreme care should be taken to keep from touching such • If liquid has been spilled, or objects have fallen into the
power lines or circuits as contact with them might be fatal.
video product.
• If the video product has been exposed to rain or water.
Use
If the video product has been dropped or the cabinet has
Cleaning: Unplug this video product from the wall outlet be- •
been damaged.
fore cleaning. Do not use liquid cleaners or aerosol cleaners.
If the video product does not operate normally follow the
Use a damp cloth for cleaning.
operating instructions. Adjust only those controls that are
Object and Liquid Entry: Never push objects of any kind into covered by the operating instructions as an improper adjustthis video product through openings as they may touch dan- ment of other controls may result in damage and will often
gerous voltage points or short out parts that could result in require extensive work by a qualified technician to restore
a fire or electric shock. Never spill liquid of any kind on the the video product to its normal operation.
video product.
When the video product exhibits a distinct change in perforLightning: For added protection for this video product re- mance — this indicates a need for service.
ceiver during a lightning storm, or when it is left unattended
Replacement Parts: When replacement parts are required, be
and unused for long periods of time, unplug it from the wall
sure the service technician has used replacement parts specoutlet and disconnect the antenna or cable system. This will
ified by the manufacturer or have the same characteristics as
prevent damage to the video product due to lightning and
the original part. Unauthorized substitutions may result in
power-line surges.
fire, electric shock or other hazards.
Service
Safety Check: Upon completion of any service or repairs to
Servicing: Do not attempt to service this video product this video product, ask the service technician to perform
yourself as opening or removing covers may expose you to safety checks to determine that the video product is in propdangerous voltage or other hazards. Refer all servicing to er operating condition.
qualified service personnel.
Be sure to read these notes before use
Safety Notes
• Make sure that you use your camera correctly. Read these
The symbols on the product (including the accesories) represent the following:
safety notes and your Basic Manual carefully before use.
AC
• After reading these safety notes, store them in a safe place.
DC
About the Icons
The icons shown below are used in this document to indicate
the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is
used incorrectly as a result.
Class II equipment (The construction of the product
is double-insulated.)
WARNING
This icon indicates that death or serious inWARNING jury can result if the information is ignored.
Technical Notes
12
This icon indicates that personal injury or
CAUTION material damage can result if the information is ignored.
The icons shown below are used to indicate the nature of the
instructions which are to be observed.
Triangular icons tell you that this information requires attention (“Important”).
Circular icons with a diagonal bar tell you that the
action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an
action that must be performed (“Required”).
304
Unplug
from power
socket
If a problem arises, turn the camera
camera off, remove the
battery, disconnect the USB cable, and unplug the AC
power adapter. Continued use of the camera when
it is emitting smoke, is emitting any unusual odor,
or is in any other abnormal state can cause a fire or
electric shock. Contact your Fujifilm dealer.
Do not allow water or foreign
foreign objects to enter the camera or connecting
connecting cables. Do not use the camera or
connecting cables following ingress of fresh or salt
water, milk, beverages, detergents, or other liquids.
Should liquid find its way into the camera or connecting cables, turn the camera off, remove the
battery, disconnect the USB cable, and disconnect
and unplug the AC adapter. Continued use of the
camera can cause a fire or electric shock. Contact
your Fujifilm dealer.
For Your Safety
WARNING
Do not use in
the bathroom
or shower
Do not
disassemble
Do not touch
internal
parts
Do not us
usee the camera in the bathroom or shower. This
can cause a fire or electric shock.
Never attempt to change or take apart tthe
he camera (never ope
openn the case). Failure to observe this precaution
can cause fire or electric shock.
CAUTION
Do not use this camera
camera in locations affected
ected by oil
fumes, steam,
steam, humidity or dust.
dust. This can cause a fire
or electric shock.
Do not leave th
this
is camera in places subject to extremely
high temperatures. Do not leave the camera in locations such as a sealed vehicle or in direct sunlight.
This can cause a fire.
305
Technical Notes
Should the case break open as the result of a fall or other
accident, do not touch the exp
exposed
osed parts. Failure to observe this precaution could result in electric shock
or in injury from touching the damaged parts. Remove the battery immediately, taking care to avoid
injury or electric shock, and take the product to the
point of purchase for consultation.
Do not change
change,, heat or unduly twi
twist
st or pull the connecconnection cord and do no
nott place heavy object
objectss on the connection cord. These actions could damage the cord and
cause a fire or electric shock. If the cord is damaged,
contact your Fujifilm dealer. Do not use cables with
bent connectors.
Do not pplace
lace the camera on aann unstable surface. This
can cause the camera to fall or tip over and cause
injury.
Never attempt to take pictures while in motion. Do
not use the camera while walking or driving. This
can result in you falling down or being involved in
a traffic accident.
Do not touch any metal parts of the camera during a
thunderstorm.
thundersto
rm. This can cause an electric shock due
to induced current from the lightning discharge.
Do not use the battery except as specified. Load the
battery as shown by the indicator.
Do not disassemble, mo
modify,
dify, or heat batter
batteries.
ies. Do not
drop, st
strike,
rike, or throw batte
batteries
ries or otherwise su
subject
bject
them to strong impacts. Do not use batteries that show
signs of leaking, deformation,
deformation, discoloration,
discoloration, or other
abnormalities.
abno
rmalities. Use only designated chargers to recharge rechargeable
rechargeable batteries and do
do not attempt to recharge non-rechargeable
non-rechargeable Li-ion or alkaline
alkaline batteries. Do
not short batteries or sstore
tore them with metallic
metallic objects.
Failure to observe these precautions could result
in the batteries overheating, igniting, rupturing, or
leaking, causing fire, burns, or other injury.
Use only batteri
batteries
es or AC power adapt
adapters
ers specified for
usee with this camera. Do not use voltages other than the
us
power supply voltage show
shown.
n. The use of other power
sources can cause a fire.
If the battery
battery leaks and fluid
uid gets in contact with
with your
eyes, skin or clothing, flush tthe
he affected area wit
withh clean
water and seek
seek medical attention or call an emergenc
emergencyy
number right away.
WARNING
Do not use the charger to charge batteries other
other than
those specifi
specified here. The supplied charger is for use
only with batteries of the type supplied with the
camera. Using the charger to charge conventional
batteries or other types of rechargeable batteries
can cause the battery to leak, overheat or burst.
Using a flash too close to a person’s eyes may cause
visual
visu
al impairment. Take particular care when photographing infants and young children.
Do not remain in prolonged contact wi
with
th hot surfaces.
Failure to observe this precaution could result in
low-temperature burns, particularly at high ambient temperatures or with users who suffer from
poor circulation or reduced sensation, in which
case use of a tripod or similar precautions are recommended.
Do not leave
leave one part of the body in contact wit
withh the
product for pr
prolonged
olonged periods while
while the product is on.
Failure to observe this precaution could result in
low-temperature burns, particularly during prolonged use, at high ambient temperatures, or with
users who suffer from poor circulation or reduced
sensation, in which case use of a tripod or similar
precautions are recommended.
Do not use in the pre
presence
sence of flammable oobjects,
bjects, explosive gases,
gases, or dust.
When ccarrying
arrying the battery, install it in a dig
digital
ital camera
or keep it in the hard case. When storing the ba
battery,
ttery,
keep it in th
thee hard case. When di
discarding,
scarding, cover the
battery terminals with
with insulation tape. Contact with
other metallic objects or batteries could cause the
battery to ignite or burst.
Keep mem
memory
ory cards, hot shoes
shoes,, and other small pa
parts
rts
out of the reach of small children. Children may
swallow small parts; keep out of reach of children.
Should a child swallow a small part, seek medical
attention or call emergency.
Keep out of reach of small children. Among the elements that could cause injury are the strap, which
could become entangled about a child’s neck,
causing strangulation, and the flash, which could
cause visual impairment.
Follow the directions
directions of airline and hospital personnel.
This product generates radio-frequency emissions
that could interfere with navigational or medical
equipment.
12
CAUTION
Do not place heavy objects on th
thee camera. This can cause
the heavy object to tip over or fall and cause injury.
Do not move the camera whi
while
le the AC power adap
adapter
ter is still
connected.
connect
ed. Do not pull on the connection cord to disconnect the AC power adapter. This can damage the
power cord or cables and cause a fire or electric shock.
Do not cover
cover or wrap the camera
camera or the AC power adapter in a cloth oorr blanket. This can cause heat to build
up and distort the casing or cause a fire.
Do not use the pl
plug
ug if it is damaged or if it does not fit
securely into the outlet. Failure to observe this precaution could result in fire or electric shock.
When you are clea
cleaning
ning the camera or yyou
ou do not plan to
usee the camera for an extended period, rem
us
remove
ove the battery and disconnect and unplu
unplugg the AC power adapt
adapter.
er.
Failure to do so can cause a fire or electric shock.
Technical Notes
12
CAUTION
When charging ends, unp
When
unplug
lug the charger from the
power socket. Leaving the charger plugged into the
power socket can cause a fire.
When a memory card is removed, the
the card could come
outt of the slot too quickly.
ou
quickly. Use your finger
nger to hold it and
gently
ge
ntly release the card.
card. Injury could result to those
struck by the ejected card.
Request regular intern
internal
al testing and clean
cleaning
ing for your
camera. Build-up of dust in your camera can cause
a fire or electric shock. Contact your Fujifilm dealer
to request internal cleaning every two years. Please
note that this service is not free of charge.
Danger
Dan
ger of explosion if battery is incorrectly
incorrectly replaced.
Replace only with the same or equivalent type.
Batteries (battery pack or batteries
batteries installed) shall not
be exposed to excessive heat ssuch
uch as sunshine, fire
re or
the like.
The Battery and Power Supply
Note: Check the type of battery used in your camera and read The battery may be warm to the touch immediately after
the appropriate sections.
charging or use. This is normal.
WARNING: Battery shall not be exposed to excessive heat ■ Battery Life
such as sunshine, fire or the like.
A noticeable decrease in the length of time the battery will
The following describes the proper use of batteries and how hold a charge indicates that it has reached the end of its serto prolong their life. Incorrect use can shorten battery life or vice life and should be replaced.
cause leakage, overheating, fire, or explosion.
■ Storage
If the camera will not be used for an extended period, store
Li-ion Batteries
it at room temperature with the battery charged to approxiRead this section if your camera uses a rechargeable Li-ion
mately one half to ⁄ capacity.
battery.
If the camera will not be used for an extended period, reThe battery is not charged at shipment. Charge the battery
move the battery and store it in a dry place with an ambient
before use. Keep the battery in its case when not in use.
temperature of from +15 °C to +25 °C (+59 °F to +77 °F). Do
■ Notes on the Battery
not store in locations exposed to extremes of temperature.
The battery gradually loses its charge when not in use.
■ Cautions: Handling the Battery
Charge the battery one or two days before use.
• Do not transport or store with metal objects such as neckBattery life can be extended by turning the camera off when laces or hairpins.
not in use.
• Do not expose to flame or heat.
Battery capacity decreases at low temperatures; a depleted • Do not disassemble or modify.
battery may not function when cold. Keep a fully charged • Do not expose to low atmospheric pressures.
spare battery in a warm place and exchange as necessary, • Use with designated chargers only.
or keep the battery in your pocket or other warm place and • Dispose of used batteries promptly.
insert it in the camera only when shooting. Do not place the • Do not drop or subject to strong physical shocks.
battery in direct contact with hand warmers or other heating • Do not expose to water.
devices.
• Keep the terminals clean.
• The battery and camera body may become warm to the
■ Charging the Battery
The battery can be charged using a BC-W126S battery charger touch after extended use. This is normal.
(available separately). Charging times will increase at ambient ■ Caution: Disposal
temperatures below +10 °C (+50 °F) or above +35 °C (+95 °F). Dispose of used batteries in accord with local regulations.
Do not attempt to charge the battery at temperatures above Attention should be drawn to the environmental aspects of
+40 °C (+104 °F); at temperatures below +5 °C (+41 °F), the battery disposal. Use the apparatus under moderate climate.
battery will not charge.
Do not mechanically crush or split batteries.
Do not attempt to recharge a fully charged battery. The battery
does not however need to be fully discharged before charging.
306
For Your Safety
AC Power Adapters
• The AC power adapter is for indoor use only.
• Be sure the cable is securely connected to the camera.
• Turn the camera off before disconnecting the adapter. Disconnect the adapter by the plug, not the cable.
• Do not disassemble.
• Do not expose to high heat and humidity.
• Do not subject to strong physical shocks.
• The adapter may hum or become hot to the touch during
use. This is normal.
• If the adapter causes radio interference, reorient or relocate
the receiving antenna.
307
Technical Notes
Using the Camera
• Do not aim the camera at extremely bright light sources, Trademark Information
including artificial light sources or natural light sources Digital Split Image is a trademark or registered trademark of
such as the sun in a cloudless sky. Failure to observe this FUJIFILM Corporation. Digital Micro Prism is a trademark or
precaution could damage the camera image sensor.
registered trademark of FUJIFILM Corporation. The typefaces
• Strong sunlight focused through the viewfinder may dam- included herein are solely developed by DynaComware
age the panel of electronic viewfinder (EVF). Do not aim Taiwan Inc. Android is a trademark or registered trademark
the electronic viewfinder at the sun.
of Google LLC. Adobe, the Adobe logo, Photoshop, and
Lightroom are trademarks or registered trademarks of Adobe
Take Test Shots
Systems Incorporated in the U.S.A. and other countries.
Before taking photographs on important occasions (such as
Wi-Fi® and Wi-Fi Protected Setup® are registered trademarks
at weddings or before taking the camera on a trip), take a
of the Wi-Fi Alliance. The Bluetooth® word mark and logos
test shot and view the results to ensure that the camera is
are registered trademarks owned by the Bluetooth SIG, Inc.,
functioning normally. FUJIFILM Corporation cannot accept
and any use of such marks by Fujifilm is under license. The
liability for damages or lost profits incurred as a result of
SDHC and SDXC logos are trademarks of SD-3C, LLC. The
product malfunction.
HDMI logo is a trademark or registered trademark of HDMI
Notes on Copyright
Licensing LLC. All other trade names mentioned in this
Unless intended solely for personal use, images recorded manual are the trademarks or registered trademarks of their
using your digital camera system cannot be used in ways respective owners.
that infringe copyright laws without the consent of the ownElectrical Interference
er. Note that some restrictions apply to the photographing
This camera may interfere with hospital or aviation equipof stage performances, entertainments, and exhibits, even
ment. Consult with hospital or airline staff before using the
when intended purely for personal use. Users are also asked
camera in a hospital or on an aircraft.
to note that the transfer of memory cards containing images
or data protected under copyright laws is only permissible Color Television Systems
NTSC (National Television System Committee) is a color telewithin the restrictions imposed by those copyright laws.
vision telecasting specification adopted mainly in the U.S.A.,
Handling
Canada, and Japan. PAL (Phase Alternation by Line) is a color
To ensure that images are recorded correctly, do not subject
television system adopted mainly in European countries and
the camera to impact or physical shocks while images are
China.
being recorded.
Exif Print (Exif Version 2.32)
Liquid Crystal
Exif Print is a newly revised digital camera file format in which
In the event that the display is damaged, care should be takinformation stored with photographs is used for optimal colen to avoid contact with liquid crystal. Take the urgent action
or reproduction during printing.
indicated should any of the following situations arise:
IMPORTANT NOTICE: Read Before Using the Software
• If liquid crystal comes in contact with your skin, clean the
area with a cloth and then wash thoroughly with soap and Direct or indirect export, in whole or in part, of licensed softrunning water.
ware without the permission of the applicable governing
• If liquid crystal enters your eyes, flush the affected eye with bodies is prohibited.
clean water for at least 15 minutes and then seek medical
Lenses and Other Accessories
assistance.
• If liquid crystal is swallowed, rinse your mouth thoroughly • Use a screw 4.5 mm or shorter when attaching a tripod.
with water. Drink large quantities of water and induce vom- • Fujifilm will not be held liable for performance issues or
iting, then seek medical assistance.
damage caused by the use of third-party accessories.
Although the display is manufactured using extremely
high-precision technology, it may contain pixels that are
always lit or that do not light. This is not a malfunction, and
images recorded with the product are unaffected.
12
NOTICES
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
Please read the “Safety Notes” and make sure you understand them before using the camera.
Perchlorate Material—special handling may apply. See:
http://www.dtsc.ca.gov/hazardouswaste/perchlorate
For Customers in the U. S. A.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
Contains IC : 10293A-WMBNBM26A
Contains FCC ID : COF-WMBNBM26A
FCC Statement: This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Technical Notes
12
308
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This
device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy
set by the Federal Communications Commission of the U.S.
Government.
The exposure standard for wireless device employs a unit of
measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are
conducted using standard operating positions accepted by
the FCC with the device transmitting at its highest certified
power level in all tested frequency bands.
Notes on the Grant: To comply with Part 15 of the FCC Rules,
this product must be used with a Fujifilm-specified ferrite-core A/V cable, USB cable, and DC supply cord.
A lithium ion battery that is recyclable powers
the product you have purchased. Please call
1-800-8-BATTERY for information on how to
recycle this battery.
California Code of Regulations, Title 20, Division 2, Chapter 4, Article 4, Appliance Efficiency Regulations, Sections 1601 through
1609
For Your Safety
For Customers in Canada
CAN ICES-3 (B)/NMB-3(B)
CAUTION: This Class B digital apparatus complies with Canadian ICES-003.
Industry Canada statement: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the
following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference,
including interference that may cause undesired operation
of the device.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter,
except tested built-in radios. The County Code Selection
feature is disabled for products marketed in the US/ Canada.
Radiation Exposure Statement: The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no
proof, however, that these low power wireless devices are
absolutely safe. Low power Wireless devices emit low levels
of radio frequency energy (RF) in the microwave range while
being used. Whereas high levels of RF can produce health
effects (by heating tissue), exposure of low-level RF that does
not produce heating effects causes no known adverse health
effects. Many studies of low-level RF exposures have not
found any biological effects. Some studies have suggested
that some biological effects might occur, but such findings
have not been confirmed by additional research. X-E4 has
been tested and found to comply with IC radiation exposure
limits set forth for an uncontrolled environment and meets
RSS-102 of the IC radio frequency (RF) Exposure rules.
Disposal of Electrical and Electronic Equipment in Private Households
In the European Union, Norway, Iceland and
Liechtenstein: This symbol on the product, or in
the manual and in the warranty, and/or on its
packaging indicates that this product shall not
be treated as household waste. Instead it should
be taken to an applicable collection point for the recycling of
electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences to the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product.
This symbol on the batteries or accumulators
indicates that those batteries shall not be treated
as household waste.
If your equipment contains easy removable batteries or accumulators please dispose these separately according to your
local requirements.
The recycling of materials will help to conserve natural resources. For more detailed information about recycling this
product, please contact your local city office, your household
waste disposal service or the shop where you purchased the
product.
In Countries Outside the European Union, Norway, Iceland and
Liechtenstein: If you wish to discard this product, including
the batteries or accumulators, please contact your local authorities and ask for the correct way of disposal.
In Japan: This symbol on the batteries indicates
that they are to be disposed of separately.
Caring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.
Technical Notes
Storage and Use
If the camera will not be used for an extended period, remove the battery and memory card. Do not store or use the camera
in locations that are:
• exposed to rain, steam, or smoke
• very humid or extremely dusty
• exposed to direct sunlight or very high temperatures, such as in a closed vehicle on a sunny day
• extremely cold
• subject to strong vibration
• exposed to strong magnetic fields, such as near a broadcasting antenna, power line, radar emitter, motor, transformer,
or magnet
• in contact with volatile chemicals such as pesticides
• next to rubber or vinyl products
12
309
Wireless Network and Bluetooth Devices: Cautions
This product complies with the following EU Directives:
• RoHS Directive 2011/65/EU
• RE Directive 2014/53/EU
Hereby, FUJIFILM Corporation declares that the radio equipment type FF200002 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
https://dl.fujifilm-x.com/global/products/cameras/x-e4/pdf/x-e4_doc-amk.pdf
This compliance is indicated by the following conformity marking placed on the product:
Technical Notes
This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g. Bluetooth®).
• Maximum radio-frequency power (EIRP):
WLAN: 8.07 dBm
Bluetooth: -0.39 dBm
IMPORTANT: Read the following notices before using the camera’s built-in wireless transmitter.
Q This product, which contains encryption function developed in the United States, is controlled by the United States
Export Administration Regulations and may not be exported or re-exported to any country to which the United States
embargoes goods.
device. Fujifilm does not accept liability for damages resulting from unauthorized
• Use only a wireless network or Bluetooth device.
use. Do not use in applications requiring a high degree of reliability, for example in medical devices or other systems that
may directly or indirectly impact human life. When using the device in computer and other systems that demand a greater
degree of reliability than offered by wireless network or Bluetooth devices, be sure to take all necessary precautions to
ensure safety and prevent malfunction.
• Use only in the country in which the device was purchased. This device conforms to regulations governing wireless network
and Bluetooth devices in the country in which it was purchased. Observe all location regulations when using the device.
Fujifilm does not accept liability for problems arising from use in other jurisdictions.
• Do not use the device in locations subject to magnetic fields, static electricity, or radio interference. Do not use the transmitter in
the vicinity of microwave ovens or in other locations subject to magnetic fields, static electricity, or radio interference that
may prevent reception of wireless signals. Mutual interference may occur when the transmitter is used in the vicinity of
other wireless devices operating in the 2.4 GHz band.
• The wireless transmitter operates in the 2.4 GHz band using DSSS, OFDM and GFSK modulation.
• Security: Wireless network and Bluetooth devices transmit data via radio and consequently their use requires greater attention to security than applies in the case of wired networks.
- Do not connect to unknown networks or networks to which you do not have access rights, even if they are displayed
on your device, as such access may be considered unauthorized. Connect only to networks to which you have access
rights.
- Be aware that wireless transmissions may be vulnerable to interception by third parties.
- This device cannot be directly connected to telecommunications networks (including public wireless LANs) operated
by providers or mobile, landline, Internet, or other telecommunications services.
• The following may be punishable by law:
- Disassembly or modification or this device
- Removal of device certification labels
• This device operates on the same frequency as commercial, educational, and medical devices and wireless transmitters. It also operates on the same frequency as licensed transmitters and special unlicensed low-voltage transmitters used in RFID tracking
systems for assembly lines and in other similar applications.
• To prevent interference with the above devices, observe the following precautions. Confirm that the RFID transmitter is not in
operation before using this device. Should you observe that the device causes interference in licensed transmitters used
for RFID tracking, immediately stop using the affected frequency or move the device to another location. If you notice that
this device causes interference in low-voltage RFID tracing systems, contact a Fujifilm representative.
• Do not use this device on board an aircraft. Note that Bluetooth may remain on even when the camera is off. Bluetooth can be
disabled by selecting OFF for D CONNECTION SETTING > Bluetooth SETTINGS > Bluetooth ON/OFF.
12
310
For Your Safety
Be sure to read these notes before using the lens
Safety Notes
• Make sure that you use the lens correctly. Read these safety
notes and the camera Basic Manual carefully before use.
• After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate
the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is
used incorrectly as a result.
This icon indicates that death or serious
WARNING injury can result if the information is ignored.
This icon indicates that personal injury or
CAUTION material damage can result if the information is ignored.
The icons shown below are used to indicate the nature of the
instructions which are to be observed.
Triangular icons tell you that this information requires attention (“Important”).
Circular icons with a diagonal bar tell you that the
action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an
action that must be performed (“Required”).
CAUTION
Do not use or store in locations tthat
hat are exposed to
steam, or smoke or ar
aree very humid or extr
extremely
emely dusty.
Failure to observe this precaution can cause fire or
electric shock.
Do not leave in di
direct
rect sunlight or in locations subject
to very high temperatures,
temperatures, such as in a closed
closed vehicle
on a sunny
sunny day. Failure to observe this precaution
can cause fire.
Keep out of the reach
reach of small children. This product
could cause injury in the hands of a child.
Do not handle with wet hands. Failure to observe this
precaution can cause electric shock.
Keep the su
sunn out of the frame w
when
hen shooting backlit
subjects. Sunlight focused into the camera when
the sun is in or close to the frame can cause fire
or burns.
When the product
product is not in use,
use, replace the lens ccaps
aps and
store out of direct sunlight. Sunlight focused by the
lens can cause fire or burns.
Do not carry
carry the camera or lens
lens while they are aattached
ttached
to a tripod. The product can fall or strike other objects, causing injury.
WARNING
Do not
immerse
Do not iimmerse
mmerse in or expose to water. Failure to observe this precaution can cause a fire or electric
shock.
Do not
disassemble
Do not disassemble (do no
nott open the case). Failure
to observe this precaution can cause fire, electric
shock, or injury due to product malfunction.
Do not touch
internal
parts
Technical Notes
Should th
thee case break open as the result of a fal
falll or other
accident, do not touch the ex
exposed
posed parts. Failure to observe this precaution could result in electric shock
or in injury from touching the damaged parts. Remove the battery immediately, taking care to avoid
injury or electric shock, and take the product to the
point of purchase for consultation.
Do not place on unstable surfaces.
surfaces. The product may
fall, causing injury.
Do not view the sun through the lens or camera viewfinders. Failure to observe this precaution can cause
permanent visual impairment.
12
311
Product Care
To ensure continued enjoyment of the product, observe
the following precautions.
Camera body: Use a soft, dry cloth to clean the camera body after
each use. Do not use alcohol, thinner, or other volatile chemicals,
which could discolor or deform the leather on the camera body.
Any liquid on the camera should be removed immediately with
a soft, dry cloth. Use a blower to remove dust from the monitor,
taking care to avoid scratches, and then gently wipe with a soft,
dry cloth. Any remaining stains can be removed by wiping gently with a piece of Fujifilm lens-cleaning paper to which a small
amount of lens-cleaning fluid has been applied. To prevent dust
entering the camera, replace the body cap when no lens is in
place.
Image sensor: Multiple photographs marred by spots or blotches in
identical locations may indicate the presence of dust on the image sensor. Clean the sensor using D USER SETTING > SENSOR
CLEANING.
Technical Notes
12
312
Cleaning the Image Sensor
Dust that cannot be removed using D USER SETTING >
SENSOR CLEANING can be removed manually as described below.
O Note that there will be a charge to repair or replace the image sensor
if it is damaged during cleaning.
1
Use a blower (not a brush) to remove
dust from the sensor.
N Do not use a brush or blower brush.
Failure to observe this precaution
could damage the sensor.
2
Check whether the dust has been successfully removed. Repeat Steps 1 and 2 as necessary.
3
Replace the body cap or lens.
Technical Notes
12
313
Firmware Updates
Updates to product firmware may result in changes not
described in the manual. For more information, visit:
https://fujifilm-x.com/support/download/firmware/cameras/
Checking the Firmware Version
O The camera will only display the firmware version if a memory card is
inserted.
1
2
Turn the camera off and check that a memory card is inserted.
3
Turn the camera off.
Turn the camera on while pressing the DISP/BACK button. The
current firmware version will be displayed; check the firmware version.
N To view the firmware version or update firmware for optional accessories such as interchangeable lenses, shoe-mounted flash units, and
mount adapters, mount the accessories on the camera.
Technical Notes
12
314
Troubleshooting
Consult the table below should you encounter problems
using your camera. If you don’t find the solution here, contact your local Fujifilm distributor.
Power and Battery
Problem
Solution
• The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 33).
The camera does not
turn on.
• The battery is inserted incorrectly: Reinsert in the correct orientation (P 30).
• The battery-chamber cover is not latched:
315
Technical Notes
Latch the battery-chamber cover (P 30).
The monitor may not turn on if the camera is turned off
The monitor does not
and then on again very quickly. Keep the shutter button
turn on.
pressed halfway until the monitor activates.
• The battery is cold: Warm the battery by placing it in a pocket or other warm place and reinsert it in the camera immediately before taking a picture.
• There is dirt on the battery terminals: Clean the terminals
The battery runs down with a soft, dry cloth.
quickly.
• ON is selected for G AF/MF SETTING > PRE-AF: Turn
PRE-AF off (P 131).
• The battery has been charged many times: The battery has
reached the end of its charging life. Purchase a new battery.
The battery is exhausted: Charge the battery or insert a
The camera turns off
fully-charged spare battery (P 33).
suddenly.
• Insert the camera battery (P 30).
• Reinsert the camera battery in the correct orientation
(P 30).
Charging does not start • Confirm that the camera is connected to the computer
(USB).
(P 33).
• If the computer is off or in sleep mode, turn on or wake
the computer and disconnect and reconnect the USB cable (P 33).
12
Problem
Charging does not start
(battery charger).
Solution
• Insert the battery.
• Reinsert the battery in the correct orientation.
• Make sure that the charger is correctly plugged in.
• Ensure that the plug adapter is correctly connected to the
charger.
Charge the battery at room temperature.
• There is dirt on the battery terminals: Clean the terminals
with a soft, dry cloth (P 30).
The indicator lamp
The battery has been charged many times: The battery has
•
blinks, but the battery
reached the end of its charging life. Purchase a new batdoes not charge.
tery. If the battery still fails to charge, contact your Fujifilm
dealer (P 298).
The power supply icon is Confirm that ON is selected for USB POWER SUPPLY
not displayed.
SETTING (P 241).
Charging is slow.
Technical Notes
12
316
Troubleshooting
Menus and Displays
Problem
Solution
Select ENGLISH for D USER SETTING > Qa
Display is not in English.
(P 39, 210).
Shooting
Problem
Solution
• The memory card is full: Insert a new memory card or delete
pictures (P 30, 190).
• The memory card is not formatted: Format the memory card
in the camera (P 208).
• There is dirt on the memory card contacts: Clean the contacts
with a soft, dry cloth.
No picture is taken when
The memory card is damaged: Insert a new memory card
•
the shutter button is
(P 30).
pressed.
• The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 33).
• The camera has turned off automatically: Turn the camera on
(P 35).
• You are using a third-party mount adapter: Select ON for
SHOOT WITHOUT LENS (P 227).
Mottling (“noise”)
Gain is increased to aid composition when the subject is
appears in the monitor
poorly lit and aperture is stopped down, which may result
or viewfinder when
in noticeable mottling when images are previewed in the
the shutter button is
displays. Images taken with the camera are unaffected.
pressed halfway.
The camera does not
The subject is not suited to autofocus: Use focus lock or manual
focus.
focus (P 85).
Technical Notes
12
317
Technical Notes
Problem
Solution
No panorama is recorded
The indicator lamp was orange when you attempted to record a
when the shutter button
panorama: Wait until the indicator lamps turns off (P 7).
is pressed.
• The subject’s face is obscured by sunglasses, a hat, long hair, or
other objects: Remove the obstructions (P 132).
• The subject’s face occupies only a small area of the frame:
Change the composition so that the subject’s face occupies a larger area of the frame (P 132).
No face is detected.
• The subject’s face is turned away from the camera: Ask the subject to face the camera (P 132).
• The camera is tilted: Keep the camera level.
• The subject’s face is poorly lit: Shoot in bright light.
• The flash is disabled: Adjust settings (P 149).
• The battery is exhausted: Charge the battery or insert a fulThe flash does not fire. ly-charged spare battery (P 33).
• The camera is in bracketing or continuous mode: Select single
frame mode (P 5).
Some flash modes are
OFF is selected for SOUND & FLASH: Select ON (P 211).
not available.
• The subject is not in range of the flash: Position the subject in
range of the flash.
The flash does not fully
The flash window is obstructed: Hold the camera correctly.
•
light the subject.
• Shutter speed is faster than the sync speed: Choose a slower
shutter speed (P 59, 65, 331).
• The lens is dirty: Clean the lens.
• The lens is blocked: Keep objects away from the lens
(P 43).
Pictures are blurred.
• s is displayed during shooting and the focus frame is displayed in red: Check focus before shooting (P 44).
12
318
Troubleshooting
Problem
Solution
• Shutter speed is slow and the ambient temperature is high: This
is normal and does not indicate a malfunction. * Use pixel
mapping (P 117).
Pictures are mottled.
* X-rays, cosmic rays, and other forms of radiation interacting
with the image sensor may cause bright spots of various colors such as white, red, and blue. Pixel mapping helps reduce
the occurrence of such bright spots.
• The camera has been used continuously at high temperatures:
Turn the camera off and wait for it to cool down (P 35,
327).
• A temperature warning is displayed: Turn the camera off and
wait for it to cool down (P 35, 327).
Technical Notes
12
319
Playback
Problem
Pictures are grainy.
Playback zoom is
unavailable.
No sound in movie
playback.
Solution
The pictures were taken with a different make or model of
camera.
The pictures were created using RESIZE or with a different
make or model of camera.
• Playback volume is too low: Adjust playback volume
(P 214).
• The microphone was obstructed: Hold the camera correctly
during recording.
• The speaker is obstructed: Hold the camera correctly during
playback.
• OFF is selected for SOUND & FLASH: Select ON
(P 211).
Selected pictures are not
deleted.
Some of the pictures selected for deletion are protected.
Pictures remain after Remove protection using the device with which it was
ERASE > ALL FRAMES is originally applied (P 194).
selected.
The battery-chamber cover was opened while the camFile numbering is
era was on. Turn the camera off before opening the batunexpectedly reset.
tery-chamber cover (P 234).
Technical Notes
12
320
Troubleshooting
Connections
Problem
Solution
The camera is connected to a TV: Pictures will be displayed
The monitor is blank.
on the TV instead of in the camera monitor (P 282).
Q EVF ONLY + E is selected for VIEW MODE
Both the TV and camera
SETTING: Put your eye to the viewfinder or choose a
monitor are blank.
different VIEW MODE SETTING option (P 14).
• The camera is not properly connected: Connect the camera
properly (P 282).
No picture or sound
• Input on the television is set to “TV”: Set input to “HDMI”
on TV.
(P 282).
• The volume on the TV is too low: Use the controls on the television to adjust the volume (P 282).
The computer does not Be sure the camera and computer are correctly connected
recognize the camera. (P 287).
FUJIFILM X RAW STUDIO
Check the option selected for CONNECTION MODE
or FUJIFILM X Acquire
on the camera. Select USB RAW CONV./BACKUP
fails to correctly detect
RESTORE before connecting the USB cable (P 291).
the camera.
ON is selected for USB POWER SUPPLY SETTING. SeCannot connect to
lect OFF when the camera is connected via a Lightning
iPhones or iPads.
connection to a device that do not supply power (P 241).
Confirm that the camera is correctly connected: The procedure
Cannot connect to
for connecting the camera varies with the type of connecsmartphone.
tor with which the smartphone is equipped (P 292).
Technical Notes
12
321
Wireless Transfer
For additional information on troubleshooting wireless connections, visit:
https://digitalcamera-support-en.fujifilm.com/
Problem
Cannot connect to
smartphone.
The camera is slow
to connect or upload
pictures to the
smartphone.
Upload fails or is
interrupted.
Solution
• The smartphone is too far away: Move the devices closer
(P 284).
• Nearby devices are causing radio interference: Move the cam-
era and smartphone away from microwave ovens or cordless phones (P 284).
• The smartphone is connected to another device: The smart-
phone and camera can connect to only one device at a
time. End the connection and try again (P 284).
• There are several smartphones in the vicinity: Try connecting
again. The presence of multiple smartphones can make
Cannot upload images. connection difficult (P 284).
• The image was created on another device: The camera may
not be able to upload images created on other devices.
• The image is a movie: Uploading movies takes some time. In
addition, smartphones may not accept upload of movies in
formats they do not support.
Select ON for GENERAL SETTINGS > RESIZE IMAGE
Smartphone will not FOR SMARTPHONE H. Selecting OFF increases updisplay pictures.
load times for larger images; in addition, some phones may
not display images over a certain size (P 242).
Technical Notes
12
322
Troubleshooting
Miscellaneous
Problem
Solution
• Temporary camera malfunction: Remove and reinsert the
battery (P 30).
The battery is exhausted: Charge the battery or insert a
The camera is unresponsive. •
fully-charged spare battery (P 33).
• The camera is connected to a wireless LAN: End the con-
nection.
The camera does not func- Remove and reinsert the battery (P 30). If the probtion as expected.
lem persists, contact your Fujifilm dealer.
When NORMAL is selected for PERFORMANCE, the
Motion in the viewfinder
frame rate will drop if no operations are performed for a
or monitor appears jerky
set period. The normal frame rate will be restored after
rather than smooth.
you operate camera controls (P 233).
• Adjust the volume (P 213).
No sound.
• OFF is selected for SOUND & FLASH: Select ON
(P 211).
Pressing the Q button does
TTL-LOCK is active: End TTL-LOCK (P 150).
not display the quick menu.
Technical Notes
12
323
Warning Messages and Displays
The following warnings appear in the display.
Warning
Description
Low battery. Charge the battery or insert a fully-charged
i (red)
spare battery.
Battery exhausted. Charge the battery or insert a fulj (blinks red)
ly-charged spare battery.
The camera cannot focus. Use focus lock to focus on ans (displayed in red with
other subject at the same distance, then recompose the
red focus frame)
picture.
The subject is too bright or too dark and the picture will be
Aperture or shutter
over- or under-exposed. Use the flash for additional lightspeed displayed in red
ing when taking photographs of poorly-lit subject.
FOCUS ERROR
LENS CONTROL ERROR Camera malfunction. Turn the camera off and then on
TURN OFF THE CAMERA again. If the message persists, contact a Fujifilm dealer.
AND TURN ON AGAIN
The shutter can only be released when a memory card is
NO MEMORY CARD
inserted. Insert a memory card.
• The memory card is not formatted or the memory card has been
formatted in a computer or other device: Format the memory
card using D USER SETTING > FORMAT.
CARD NOT INITIALIZED • The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message is repeated,
format the card. If the message persists, replace the card.
• Camera malfunction: Contact a Fujifilm dealer.
Technical Notes
12
324
Warning Messages and Displays
Warning
LENS ERROR
CARD ERROR
PROTECTED CARD
BUSY
b MEMORY FULL
Description
Turn the camera off, remove the lens, and clean the mounting surfaces, then replace the lens and turn the camera on.
If the problem persists, contact a Fujifilm dealer.
• The memory card is not formatted for use in the camera: Format the card.
• The memory card contacts require cleaning or the memory card
is damaged: Clean the contacts with a soft, dry cloth. If the
message is repeated, format the card. If the message persists, replace the card.
• Incompatible memory card: Use a compatible card.
• Camera malfunction: Contact a Fujifilm dealer.
The memory card is locked. Unlock the card.
The memory card is incorrectly formatted. Use the camera
to format the card.
The memory card is full and pictures cannot be recorded.
Delete pictures or insert a memory card with more free
space.
Technical Notes
12
325
Warning
Description
• Memory card error or connection error: Reinsert the card or
WRITE ERROR
FRAME NO. FULL
READ ERROR
PROTECTED FRAME
Technical Notes
12
326
turn the camera off and then on again. If the message
persists, contact a Fujifilm dealer.
• Not enough memory remaining to record additional pictures:
Delete pictures or insert a memory card with more free
space.
• The memory card is not formatted: Format the memory card.
• The memory card was removed while data were being recorded:
Do not remove the memory card during recording.
The camera has run out of frame numbers (current frame
number is 999-9999). Insert a formatted memory card and
select RENEW for D SAVE DATA SET-UP > FRAME NO..
Take a picture to reset frame numbering to 100-0001, then
select CONTINUOUS for FRAME NO..
• The file is corrupt or was not created with the camera: The file
cannot be viewed.
• The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message is repeated,
format the card. If the message persists, replace the card.
• Camera malfunction: Contact a Fujifilm dealer.
An attempt was made to delete or rotate to a protected picture. Remove protection and try again.
Warning Messages and Displays
Warning
CAN NOT CROP
Description
The picture is damaged or was not created with the camera.
Print orders can contain no more than 999 pictures. Copy
any additional pictures you wish to print to another memoDPOF FILE ERROR
ry card and create a second print order.
The picture cannot be printed using DPOF.
CAN NOT SET DPOF
F CAN NOT SET DPOF Movies cannot be printed using DPOF.
The selected picture cannot be rotated.
CAN NOT ROTATE
F CAN NOT ROTATE Movies cannot be rotated.
F CANNOT EXECUTE Red-eye removal cannot be applied to movies.
Red-eye removal cannot be applied to pictures created
m CANNOT EXECUTE with other devices.
MISMATCH: 4K MODE The movie mode selected with the camera is not compatAND EXTERNAL MONITOR ible with the device to which the camera is connected via
CHANGE MOVIE MODE HDMI. Try selecting a different movie mode (P 155).
Turn the camera off and wait for it to cool. Mottling may
p (yellow)
increase in pictures taken when this warning is displayed.
Turn the camera off and wait for it to cool. While this warning is displayed, movie recording may not be available,
p (red)
mottling may increase, and performance, including frame
advance rate and display quality, may drop.
Technical Notes
12
327
Memory Card Capacity
The following table shows the recording time or number
of pictures available at different image sizes. All figures are
approximate; file size varies with the scene recorded, producing wide variations in the number of files that can be
stored. The number of exposures or length remaining may
not diminish at an even rate.
Capacity
T
Photos
O 3∶2
RAW (UNCOMPRESSED)
RAW (LOSSLESS COMPRESSED)
RAW (COMPRESSED)
FINE
1030
16 GB
NORMAL
1540
270
500
FINE
2060
32 GB
NORMAL
3090
550
1010
Movies 1, 2
690
1400
V2160
20 minutes
40 minutes
W1080
20 minutes
40 minutes
1 Use a UHS speed class 3 card or better.
2 Assumes default bit rate.
O If the memory card has a capacity of over 32 GB, movies will be recorded
in single files, regardless of size. If the card has a capacity of 32 GB or less,
movies over 4 GB in size will be recorded uninterrupted across multiple files.
Technical Notes
12
328
Specifications
System
Model
Product Number
Effective pixels
Image sensor
Storage media
Memory card slot
File system
File format
Image size
329
Technical Notes
Lens mount
Sensitivity
FUJIFILM X-E4
FF200002
Approx. 26.1 million
23.5 mm × 15.6 mm (APS-C), X-Trans CMOS 4 sensor with
primary color filter
Fujifilm-recommended SD/SDHC/SDXC memory cards
SD memory card slot (UHS-I compliant)
Compliant with Design Rule for Camera File System (DCF2.0),
Exif 2.32, and Digital Print Order Format (DPOF)
• Still pictures: Exif 2.32 JPEG (compressed); RAW (original RAF
format, uncompressed or compressed using a reversible or
non-reversible algorithm; special purpose software required);
RAW+JPEG available
• Movies: MPEG-4 AVC/H.264 standard with stereo sound (MOV/
MP4)
• Audio (voice memos): Stereo sound (WAV)
O 3∶2 (6240 × 4160)
O 1∶1 (4160 × 4160)
O 16∶9 (6240 × 3512)
P 3∶2 (4416 × 2944)
P 1∶1 (2944 × 2944)
P 16∶9 (4416 × 2488)
Q 3∶2 (3120 × 2080)
Q 1∶1 (2080 × 2080)
Q 16∶9 (3120 × 1760)
RAW (6240 × 4160)
O panorama: vertical (2160 × 9600)/horizontal (9600 × 1440)
P panorama: vertical (2160 × 6400)/horizontal (6400 × 1440)
FUJIFILM X mount
• Still pictures: Standard output sensitivity equivalent to
ISO 160 – 12800 in increments of ⁄ EV; AUTO1; AUTO2; AUTO3;
extended output sensitivity equivalent to ISO 80, 100, 125,
25600, or 51200
• Movies: Standard output sensitivity equivalent to ISO 160–12800
in increments of ⁄ EV; AUTO; extended output sensitivity equivalent to ISO 25600
12
System
Metering
Technical Notes
256-segment through-the-lens (TTL) metering;
MULTI, SPOT, AVERAGE, CENTER WEIGHTED
Exposure control
Programmed AE (with program shift); shutter-priority AE;
aperture-priority AE; manual exposure
Exposure compensation • Still pictures: −5 EV – +5 EV in increments of ⁄ EV
• Movies: −2 EV–+2 EV in increments of ⁄ EV
Shutter speed
• MECHANICAL SHUTTER
⁃ Mode P: 4 s to ¼ s
⁃ Mode A: 30 s to ¼ s
⁃ Modes S and M: 15 min. to ¼ s
⁃ Bulb: Max. 60 min.
• ELECTRONIC SHUTTER
⁃ Mode P: 4 s to ⁄ s
⁃ Mode A: 30 s to ⁄ s
⁃ Modes S and M: 15 min. to ⁄ s
⁃ Bulb: Fixed at 1 s
• MECHANICAL + ELECTRONIC
⁃ Mode P: 4 s to ⁄ s
⁃ Mode A: 30 s to ⁄ s
⁃ Modes S and M: 15 min. to ⁄ s
⁃ Bulb: Max. 60 min.
Continuous
Available frame advance rates
CONTINUOUS MODE
(JPEG)
30
30fps(1.25X CROP) *
20
20fps(1.25X CROP) *
10fps(1.25X CROP) *
10
20fps *
20
10fps *
10
8.0fps
8.0
5.0fps
5.0
4.0fps
4.0
3.0fps
3.0
* Available with electronic shutter only.
O The frame rate and number of frames per burst var-
12
ies with shooting conditions and type of memory
card used.
330
Specifications
System
Focus
• Mode: Single or continuous AF; manual focus with focus ring
• Autofocus system: Intelligent hybrid AF (TTL contrast-detect/
phase-detection AF) with AF-assist illuminator
• Focus-area selection: SINGLE POINT, ZONE, WIDE/TRACKING, ALL
White balance
Technical Notes
Auto (WHITE PRIORITY, AUTO, AMBIENCE PRIORITY), Custom 1,
Custom 2, Custom 3, color temperature selection, direct sunlight, shade, daylight fluorescent, warm white fluorescent,
cool white fluorescent, incandescent, underwater
Self-timer
Off, 2 sec., 10 sec.
Flash mode
• MODE: TTL MODE (FLASH AUTO, STANDARD, SLOW SYNC.),
MANUAL, MULTI, OFF
• SYNC. MODE: 1ST CURTAIN, 2ND CURTAIN, AUTO FP (highspeed sync)
• RED EYE REMOVAL: e FLASH+REMOVAL, L FLASH,
d REMOVAL, OFF
Hot shoe
Accessory shoe with TTL contacts; supports sync speeds as
fast as ⁄ s
Sync contact
X contact; supports sync speeds as fast as ⁄ s
Sync terminal
–
Electronic viewfinder 0.39-in., 2360k-dot OLED viewfinder; magnification 0.62×
with 50 mm lens (35 mm format equivalent) at infinity and
(EVF)
diopter set to −1 m−1; diagonal angle of view approximately
31° (horizontal angle of view approximately 26°)
• Diopter adjustment: −4 to +2 m−1
• Eyepoint: Approximately 17.5 mm
LCD monitor
3.0-in/7.6 cm, 1620k-dot color touch screen LCD monitor,
tilting
Movies
• Movie size: V 16∶9, d 17∶9, W 16∶9, W 17∶9
(with stereo sound) • Frame rate: 59.94P, 50P, 29.97P, 25P, 24P, 23.98P
• Bit rate: 200Mbps, 100Mbps, 50Mbps
• Recording/output format: SD card, 4∶2∶0, 8-bit/HDMI output,
4∶2∶2, 10-bit
High-speed movies • Movie size: FULL HD 16∶9
• Frame advance rate: 240P, 200P, 120P, 100P
12
331
Input/output terminals
Microphone connector ⌀3.5 mm mini-stereo jack
Headphone jack socket The USB connector can be converted to a headphone jack
using the supplied headphone adapter
Remote release connector ⌀3.5 mm 3-pole mini jack
Digital input/output USB connector (Type-C) USB3.2 Gen1x1
HDMI output
HDMI Micro connector (type D)
Power supply/other
Power supply
NP-W126S rechargeable battery (supplied with camera)
Battery life
• Battery type: NP-W126S
• Lens: XF35mmF1.4 R
• External flash units: Disabled
• Shooting mode: Mode P
Number of shots
PERFORMANCE
LCD
EVF
BOOST
Approx. 270
Approx. 270
NORMAL
Approx. 460
Approx. 430
Total length of footage that can be recorded on
a single charge
Continuance
Actual battery life
battery life of
movie capture
Mode
of movie capture
Approx. 45 minutes
Approx. 60 minutes
V1
Approx. 50 minutes
Approx. 75 minutes
W2
High-speed movies 3 Approx. 80 minutes
–
1 At a frame rate of 29.97 fps.
2 At a frame rate of 59.94 fps.
3 At a frame rate of 120 fps.
Technical Notes
CIPA standard. Measured using battery supplied with camera
and SD memory card.
Note: Battery endurance varies with battery charge level and
the figures given above are not guaranteed. Battery endurance will decline at low temperatures.
12
332
Specifications
Power supply/other
121.3 mm × 72.9 mm × 32.7 mm/4.78 in. × 2.87 in. × 1.29 in.
Camera size
(excluding projections)
(W × H × D)
Camera weight
Approx. 315 g/11.1 oz., excluding battery, accessories, and
memory card
Shooting weight
Approx. 364 g/12.8 oz., including battery and memory card
Operating conditions • Temperature: 0 °C to +40 °C/+32 °F to +104 °F
• Humidity: 10% to 80% (no condensation)
Wireless transmitter
Wireless LAN
Standards
Operating frequency
(center frequency)
Access protocols
Bluetooth®
Standards
Operating frequency
(center frequency)
IEEE 802.11b/g/n (standard wireless protocol)
2,412 MHz–2,462 MHz (11 channels)
Infrastructure
Bluetooth version 4.2 (Bluetooth Low Energy)
2,402 MHz–2,480 MHz
Technical Notes
12
333
Specifications
NP-W126S rechargeable battery
Nominal voltage
7.2 V
Nominal capacity
1260 mAh
Operating
0 °C to +40 °C/+32 °F to +104 °F
temperature
Dimensions
36.4 mm × 47.1 mm × 15.7 mm/1.4 in. × 1.9 in. × 0.6 in.
(W × H × D)
Weight
Approx. 47 g/1.7 oz.
N Weight and dimensions vary with the country or region of sale.
O Specifications and performance are subject to change without notice.
Fujifilm will not be held liable for any errors this manual may contain.
The appearance of the product may differ from that described in this
manual.
Technical Notes
12
334
MEMO
335
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
https://fujifilm-x.com