Load cells
DLM40-SO
Compact screw-on load cells for industrial applications
DLM40-SO.###.TP3.C4
Overview
■
■
■
■
■
■
Tension and compression load till 20 kN
Non-linearity < 0.2 %
Mounting possibility on both sides
Sensor body made of stainless steel with protection class IP68
Fully welded sensor design
Durable with 100% working stroke
Technical data general data
Measuring range
Non-linearity
Repeatability
Temperature effect zero
Zero point deviation
Type
Mechanical mounting electrical data
Nominal sensitivity
Bridge resistance
Supply voltage
Signal polarity positive mechanical data
Overload
Breaking load
0 ... 20 kN
< 0.2 %
< 0.1 %
< 0.2 % / 10K
< 20 %
Screw-on
4 x M6 screws / M12 thread
1 mV/V
1000 Ω
0.5 ... 12 VDC
Tension
150 %
200 % mechanical data
Nominal displacement
Weight
Material sensor body
Fatigue strength
36 μm
330 g
Stainless steel, 1.4542
>10 Mio cycles at 0...100% FS
M8, 4 pin, male Electrical connection environmental conditions
Operating temperature range
-40 ... 85 °C
Storage temperature range -40 ... 85 °C
Protection class EN 60529,
ISO20653 compliance and approvals
IP 68
EMC
UL listed
EN 61000-6-2
EN 61000-6-3
EN 61326-2-3
E217824 www.baumer.com
Data sheet – DLM40-SO Page 1 of 2
Dimensional drawings
Load cells
DLM40-SO
Compact screw-on load cells for industrial applications
DLM40-SO.###.TP3.C4
Electrical connection
Ordering key - Configuration possibilities see website
Product group
Membrane force sensor
Size category
40
Type
Screw-on
Max. nominal force
2 kN
5 kN
10 kN
20 kN
Measuring direction positive
Tension
Ouput signal
Nominal sensitivity 1.00 mV/V
Electrical connection
M8, 4 pin, male www.baumer.com
Data sheet – DLM40-SO
DLM 40 - SO .
### .
T P3 .
C4
DLM
40
SO
202
502
103
203
T
P3
C4
Page 2 of 2
