Force sensors
DLM40-IN.103.TP3.C4
Article number: 11217792
Overview
■
■
■
■
■
■
Tension and compression load till 10 kN
Non-linearity < 0.2 %
One-sided stop with integrated hexagon for easy mounting
Sensor body made of stainless steel with protection class IP68
Fully welded sensor design
Durable with 100% working stroke
Technical data
Mechanical data
Measuring range
0 ... 10 kN
Electrical connection
Non-linearity
< 0.2 %
Electrical data
Repeatability
< 0.1 %
Nominal sensitivity
1 mV/V
Temperature effect zero
< 0.2 % / 10K
Bridge resistance
1000 Ω
Zero point deviation
< 20 %
Supply voltage
0.5 ... 12 VDC
Type
Inline
Signal polarity positive
Tension
Mechanical mounting
M12 thread / M12 thread
Environmental conditions
150 %
Operating temperature
range
-40 ... 85 °C
Overload
Breaking load
200 %
Storage temperature range
-40 ... 85 °C
Fatigue strength
>10 Mio cycles at 0...100% FS
40 μm
Protection class EN 60529,
ISO20653
IP 68
Nominal displacement
Weight
230 g
Material sensor body
Stainless steel, 1.4542
Mechanical data
M8, 4 pin, male
The product features and technical data specified do not express or imply any warranty. Technical modifications subject to change.
General data
Compliance and approvals
E217824
2022-02-03
UL listed
www.baumer.com
Data sheet – DLM40-IN.103.TP3.C4
Page 1 of 2
Force sensors
DLM40-IN.103.TP3.C4
Article number: 11217792
Dimensional drawings (mm)
2022-02-03
The product features and technical data specified do not express or imply any warranty. Technical modifications subject to change.
Electrical connection
www.baumer.com
Data sheet – DLM40-IN.103.TP3.C4
Page 2 of 2
">
