Force sensors
DLM40-SO
Compact screw-on load cells for industrial applications
DLM40-SO.###.TP3.C4
Overview
■
■
■
■
■
■
Tension and compression load till 20 kN
Non-linearity < 0.2 %
Mounting possibility on both sides
Sensor body made of stainless steel with protection class IP68
Fully welded sensor design
Durable with 100% working stroke
Technical data
General data
Mechanical data
0 ... 20 kN
Breaking load
200 %
Non-linearity
< 0.2 %
Fatigue strength
>10 Mio cycles at 0...100% FS
Repeatability
< 0.1 %
Nominal displacement
36 μm
Temperature effect zero
< 0.2 % / 10K
Weight
330 g
Zero point deviation
< 20 %
Material sensor body
Stainless steel, 1.4542
Type
Screw-on
Electrical connection
M8, 4 pin, male
Mechanical mounting
4 x M6 screws / M12 thread
Environmental conditions
1 mV/V
Operating temperature
range
-40 ... 85 °C
Nominal sensitivity
Bridge resistance
1000 Ω
Storage temperature range
-40 ... 85 °C
Supply voltage
0.5 ... 12 VDC
IP 68
Signal polarity positive
Tension
Protection class EN 60529,
ISO20653
Electrical data
Compliance and approvals
Mechanical data
150 %
UL listed
E217824
2021-11-12
Overload
The product features and technical data specified do not express or imply any warranty. Technical modifications subject to change.
Measuring range
www.baumer.com
Data sheet – DLM40-SO
Page 1 of 2
Force sensors
DLM40-SO
Compact screw-on load cells for industrial applications
DLM40-SO.###.TP3.C4
Dimensional drawings (mm)
Ordering key - Configuration possibilities see website
DLM 40
Product group
Membrane force sensor
Size category
40
Type
Screw-on
Nominal force
2 kN
- SO .
###
.
T P3 . C4
DLM
40
SO
202
5 kN
502
10 kN
103
20 kN
Measuring direction positive
Tension
Output signal
Nominal sensitivity 1.00 mV/V
Electrical connection
M8, 4 pin, male
203
T
P3
2021-11-12
C4
The product features and technical data specified do not express or imply any warranty. Technical modifications subject to change.
Electrical connection
www.baumer.com
Data sheet – DLM40-SO
Page 2 of 2
">
