Elation Lumina Matrix User Manual

Lumina Matrix

USER MANUAL

40-3402

2

Lumina Matrix LED

Accessories

(Included):

1. The unit power cable (x1) + Yoke Assembly (x1)

2. Axle Bush(x2) + L Type Hexagon Spanner(x1) + M10 Washer(x4)

3. M10*20 S Type Bakelite Screws(x2) + Belleville Washer(x2)

4. M6*12 Screw(x4) + M6*20 Screw(x2) + Profile gasket(x2)

MAIN FEATURES

07, 08, 10, 14, 16, 22 DMX Channels selection

Standard DMX 5-pin In/Out

48 built-in programs except for Auto subject to Speed and Dimmer

0-100% dimming level

Standard DMX-512 protocol

01 Thru 100 Chase Speed adjustment

Power failure memory

LED display window-shows current activity and function state

On/Off switch

Fuse protection

INSTALLATION

Lumina Matrix LED is provided with the ability to hang via truss hooks, clamps, etc.(sold separately). Simply attach hook clamp, etc. to the Lumina Matrix LED’s mounts in the provided M13 holes. Before use, make sure the screws are secured firmly.

Note :

Once this unit is for hanging application, it is required to use a safety rope (sold separately, which can hold at least

10 times the weight of the fixture ) to ensure the mounting safety of the fixture by attached through the holder.

Yoke Assembly(x1)

Axle Bush(x2)

M6*20 Screw(x2)

S Type Bakelite Screw(x2)

M10 Washer(x4)

Belleville Washer(x2)

Profile Gasket (x2)


GENERAL INSTRUCTIONS

Thanks for your purchasing Elation Lumina Matrix LED lighting equipment, which is available in Warm White

(WW) version. The Lumina Matrix LED is compatible of both DMX & RDM and with 16 channel LED intensity adjustable. Programs can be updated via RDM interface. It is available in master and slave control connection.

It is easy for users to install and operate.

For the optimum operation and best performance, please read the instruction in this manual carefully and thoroughly.

WARNINGS

To protect against high electric shock and injury to person,

DO NOT

open or dismantle the unit.

After use, the front panel is extreme hot. Please wait at least 15 min. for absolute cool before touching it.

Otherwise, it causes the result of burning.

NEVER

try to repair the unit yourself. Repair by unqualified people could cause damage or mis-operation.

This device is not suitable for direct mounting on normally flammable surfaces. To keep a minimum 0.2m safety distance to any flammable materials.

DO NOT

make any inflammable liquids, water or metal objects enter the unit.

This unit contains no user serviceable parts inside. This unit contains dangerous voltages, always remove the power plug from the wall socket before any service operation and when not in use for a long time.

Earth connection is so essential.

Stop using the unit immediately in the event of serious operation problems and either contact your local dealer for a check or contact us directly.

PHYSICAL DIMENSIONS


Multi-Lumina Matrix LEDs can be installed together for hanging application via a L type spanner(included). Line up the products side by side, then insert the L type spanner into the mounting hole on the back of the product, and then turn the L type spanner in clockwise, the products will be locked together. (see the illustrations as below)

WARNING! Never install over 5 units together in a vertical row. Or else, there will be overweight danger.

Lock Details

Fasten



Power:

Before plugging your unit in, be sure the resource voltage in your area matches the unit required voltage.

The unit is available in 100-240 VAC. Because the line voltage may vary from venue to venue, you should be sure to plug the socket into a matching wall outlet before attempting to operate your unit.

Fuses:

The Lumina Matrix LED electric system is protected by T3.15A 250V 5x20mm. Please see the printing on the case and these fuses prevent you from overloading damaging your unit. To replace the protective fuse, use a flat head screwdriver to unscrew the fuse holder. Pull out the old fuse and replace it with a new one. Insert the fuse back into the slot and tighten. Always replace with exact same type fuse removed unless otherwise specified by an authorized service technician,

SYSTEM CONNECTION

Maximum amount of this units that may be connected is 12pcs(AC100-120V) or 21pcs(220-240V). One universe

DMX candrive up to 32pcs of Lumina Matrix LED, please add DMX booster if Lumina Matrix LEDs are connected together in line over 32pcs or data cable over 100M. the connections may be illuminated as following.

DMX IN

POWER IN

5pin DMX Cable

Connect to12pcs(AC100-120V) / 21pcs(AC230V)

DMX IN

DMX OUT DMX OUT

DMX IN

3pin Power Cable

DMX OUT

DMX IN

DMX IN

DMX OUT


LCD DISPLAY/MENU SYSTEM

LCD Display

Mode Key

MODE UP

POWER

RDM/DMX

DOWN

Power indicator

RDM/DMX indicator

Down Key

Menu Key Up Key

OPERATION MODES

The “ Lumina Matrix LED ” has two different operation modes. It can be used as a 07, 08, 10, 14, 16, 22 channel DMX dimmer. Tap “Mode” button to switch the operation mode between “DMX Control Mode” and “Built-in Program Mode”.

Please follow illustrations below to operate the unit in your desired mode.

Mode

Parameter

DMX

Address

Channel

No DMX

Glide

Program

Program

Speed

Master

Lamp Mode

Fade Time

Parameter Value

001-512

07/08/10/14/16/22

OFF/Hold/Program

OFF/ON

01--48/AUTO

01-100

00-100

Tungsten/LED

00-100

Function

To set the initial DMX receiving address

To set the DMX Control Mode

To set the status of the fixture when no DMX signal input

To set the output of the DMX Data

To select a built-in program

To set the speed level of the built-in Program

To set the intensity

To set the mode of Lamp

To set the speed of the Fadetime


DMX Mode

Use this operation mode only when you are about to use the unit as a DMX dimmer. This function can allow you set your unit dimmer function as a 07, 08, 10,14, 16 or 22 channel DMX dimmer and DMX address.

DMX Channel Functions Details

DMX

Channel

10 Channel Mode

LED 1-LED4 Dimmer

LED 5-LED8 Dimmer

LED 9-LED12 Dimmer

LED 13-LED16 Dimmer

LED 1-LED8 Dimmer

LED 9-LED16 Dimmer

LED 1-LED16 Dimmer

Lamp Mode

DMX Channel

17

18

19

20

21

22

22 Channel Mode

LED1 Dimmer

LED2 Dimmer

LED3Dimmer

LED4 Dimmer

LED5 Dimmer

LED6 Dimmer

LED7 Dimmer

LED8 Dimmer

LED9 Dimmer

LED10 Dimmer

LED11 Dimmer

LED12 Dimmer

LED13 Dimmer

LED14 Dimmer

LED15 Dimmer

LED16 Dimmer

Program

Speed

Fade Time

Lamp Mode

Play Mode

Master

16 Channel Mode

LED1 Dimmer

LED2 Dimmer

LED3Dimmer

LED4 Dimmer

LED5 Dimmer

LED6 Dimmer

LED7 Dimmer

LED8 Dimmer

LED9 Dimmer

LED10 Dimmer

LED11 Dimmer

LED12 Dimmer

LED13 Dimmer

LED14 Dimmer

LED15 Dimmer

LED16 Dimmer

14 Channel Mode

LED1-LED2 Dimmer

LED3-LED4 Dimmer

LED5-LED6 Dimmer

LED7-LED8 Dimmer

LED9-LED10 Dimmer

LED11-LED12 Dimmer

LED13-LED14 Dimmer

LED15-LED16 Dimmer

Program

Speed

Fade Time

Lamp Mode

Play Mode

Master


Program Mode:

The unit has 48 built-in programs except for Auto. Of course, you can select any of these programs to chase for a more dramatic lighting show, and you can also control the speed at which the set programs will be chased.

1. Setting your desired Chase Program:

Once you have activated the Chase Mode, you can tap the “MENU” button to select and activate “Chase Program” menu. The chase pattern is displayed in the LCD by "Program " followed by two digits 01~48 or only "AUTO" appears. You can tap “UP” and “DOWN” button to select any of them to run at a single time.

Selecting any program of Program01-48 will activate the selected program; while selecting “Auto” will automatically play the built-in 48 chase programs.

2. Chase Speed Menu:

Press “MENU’ button to select and activate “Chase Speed” menu. In this menu, you can adjust the program chase speed.

Use the "UP " and "DOWN" buttons to adjust the chase speed from 001 thru 100. A set value of 100 will give you the fastest chase speed(approx.1/10th of a second) . While a set value of

001 will give you the slowest chase speed (once every 30 second.).

3. Master (Intensity) Menu:

To adjust the output intensity, you must activate the

Chase Dimmer Menu as the previous step. Press “MENU” button and select “Chase Dimmer” menu, the LCD will display

“Dimmer” followed by three digits.

Use the "UP" and "DOWN " buttons to adjust the light output

intensity between 000 ~ 100. A set value of 000 will give you

the weakest output intensity and a set value of 100 will give

you the full intensity.

Program

01

MODE MENU UP DOWN

Auto


Speed

001


Speed

100


Dimmer

001


Dimmer

100


4. Lamp Mode Menu:

Press “MENU” button and select “Lamp Mode” menu, the LCD will display “LampMode Tungdten”, user can press “UP” or “DOWN” button to switch to “LampMode LED” menu.

5. Fade Time Menu:

Press “MENU” button and select “Fade Time” menu, the LCD will display “FadeTime” followed by three digits, user can press “UP” or “DOWN” button set the desired Fade time value from 000 to 100.


LampMode

LED


FadeTime

000


Channel Parameter details

：

Parameters

LED Dimmer DMX

value

Functions

0

---

100%

equal to intensity 0

---

100%

Program

DMX 0

--

3 for local DMX Dimmer Mode

DMX 4

--

7 Program 1

DMX 8

--

11 Program2

DMX 12

--

15 Program3

DMX 16

--

19 Program4

…

DMX 192

DMX 196

--

195 Program48

--

255 Auto

Speed The bigger DMX value is, the faster the Programe runs

FadeTime

LampMode

Play Mode

Master

DMX value

0

---

100% equals to FadeTime 0

---

100%

DMX 0

--

127 for choosing the work mode of the LED

DMX 128

--

255 for choosing Tungsten

DMX 0

--

80 to stop the Program

DMX 81

--

160 to pause the Program

DMX 161

--

255 to play the Program

DMX value 0

---

100% equals to Program intensity

0

---

100%

1. Selecting DMX Address

Press “MENU” button and select DMX channel address menu after having

activated the Receive Mode. The DMX Address Mode is indicated by

"Address” followed by three digits 001~ 512. You can tap the “UP” and

“DOWN” buttons to change the DMX Address Value.

Address

001


Note: There is no DMX input in the master unit of the connection.

2. Selecting the DMX Channel

Press “MENU” button and select Channel Mode. The Channel Mode is indicated by "Channel" followed by two digits 07,08, 10, 14, 16, 22. You can tap the "UP” and "DOWN" buttons to change the setting from 07, 08, 10,14

16 or 22 which you wish to run.

Channel

01



NOTE:

1. When CH:07 is displayed, overall channels will be controlled by DMX channel 1, and the DMX2~7 will control

to run a 1~48 sequential program.

2. When CH:08 is displayed, channel 1~8 will be controlled by DMX channel 1, channel 9~16 will be controlled by

DMX channel 2. The DMX channel 3~8 will control to run a 1~48 sequential program.

3. When CH:10 is displayed, channel 1~4 will be controlled by DMX channel 1, channel 5~8 will be controlled by

DMX channel 2, the rest will be deduced by analogy... and channel 13~16 will be controlled by DMX channel

4. The DMX channel 5~10 will control to run a 1~48 sequential program.

4. When CH:14 is displayed, channel 1~2 will be controlled by DMX channel 1, channel 3~4 will be controlled

by DMX channel 2, channel 5~6 will be controlled by DMX channel 3, the rest can be deduced by analogy

... and channel 15~16 will be controlled by DMX channel 8. The DMX channel 9~14 will control to run a 1~48

sequential program.

5. When CH:16 is displayed, each channel will be controlled by one DMX channel. This is the factory default

setting.

6. When CH:22 is displayed, DMX channel1~16 will control the LED, and the DMX channel 17~22 will control

to run a 1~48 sequential program.

Lumina Matrix LED RDM Parameter IDs

The following tables outline and describe all the RDM parameters IDs associated with Lumina Matrix LED.

Table 1: Lumina Matrix LED RDM Parameter IDs





Table 2: Lumina Matrix LED Manufacturer Status IDs

Manufacturer Defined Status IDs

Manufacturer Specific messages are in the range of 0x8000 —0xFFDF. Each Manufacturer-specific

Status ID shall have a unique meaning, which shall be consistent across all products having a given

Manufacturer ID. See Table B-2, ANSI E1.20-2010

Status Message ID

8100H

Value Data Value 1 Data Value 2

00H 00H

Status ID Description

ALL OK

Table 3: Lumina Matrix LED Manufacturer Specific PIDs

Manufacturer Specific PIDs

Manufacturer Defind PIDs range is 0x8000-0xffdf. See Table A-3, ANSI E1.20-2010

Get

Allowed

SET

Allowed

RDM Parameter

ID’s

TYPE LENGTH UNIT PREFIX MIN MAX DEFAULT DESCRIPTION

8A08H

8A09H

8A01H

U8

U8

U8

1

1

1

NONE NONE

NONE NONE

NONE NONE

0

1

0

48

100

100

0

80

100

Program

Speed

Master

8A42H

8A0BH

U8

U8

1

1

NONE NONE

NONE NONE

0

0

1

100

1

100

Lamp mode

FadeTime

8A0CH

8A0DH

U8

U8

1

1

NONE NONE

NONE NONE

0

0

2

1

0

1

No DMX

Glide


TECHNICAL SPECIFICATIONS

Light Source Warm White LED Array

Beam Angle 15 Degrees

Color Temperature

Light Output

2700K

> 4,500 lm

IP Rating IP20

Power Consumption 150W Max.

Weight 9.8Kg

Dimension 400(L)*460(W)*90(H)mm.

Please note: Specifications and improvements in the design of this product and this manual are subject to change without any prior notice.

SOFTWARE UPDATE ADDS ADDITIONAL DMX CHANNEL MODES

MODE

DMX

Program

Manual

MENU

Address

Channel

No DMX

Dim Mode

Program

Speed

Fade

Master

Master

LED 1-16

All

DISPLAY

001 - 512

7 / 8 / 10 / 14 / 16 / 22 (8bit)

8 / 10 / 14 / 22 / 38 (16bit)

OFF/Hold/Program

Standard/Stage/TV/Archi/Theatre

01-48 / Auto

0 - 100

0 - 100

0 - 100

0 - 100

0 - 100

0 -100

DMX

MENU MAP

Address

Channel

PROGRAM

MANUAL

No DMX

Dim Mode

LED11

LED12

LED13

LED14

LED15

LED16

ALL

LED6

LED7

LED8

LED9

LED10

Program

Speed

FadeTime

Master

Master

LED1

LED2

LED3

LED4

LED5

OFF/Hold/Program

Standard

Stage

TV

Architectural

Theatre

01--48/Auto

01---100

00-100

00-100

00-100

00-100

00-100

00-100

00-100

00-100

00-100

00-100

00-100

00-100

00-100

00-100

00-100

00-100

00-100

00-100

00-100

00-100

001--512

7/8Bit

8/8Bit

10/8Bit

14/8Bit

16/8Bit

22/8Bit

8/16Bit

10/16Bit

14/16Bit

16/16Bit

22/16Bit

38/16Bit

DMX Channel

3

4

5

1

2

20

21

22

23

24

25

26

27

28

34

35

36

37

38

29

30

31

32

33

11

12

13

14

8

9

6

7

10

15

16

17

18

19

38/16Bit

LED1(16bit)

LED1(16bit Fine)

LED2(16bit)

LED2(16bit Fine)

LED3(16bit)

LED3(16bit Fine)

LED4(16bit)

LED4(16bit Fine)

LED5(16bit)

LED5(16bit Fine)

LED6(16bit)

LED6(16bit Fine)

LED7(16bit)

LED7(16bit Fine)

LED8(16bit)

LED8(16bit Fine)

LED9(16bit)

LED9(16bit Fine)

LED10(16bit)

LED10(16bit Fine)

LED11(16bit)

LED11(16bit Fine)

LED12(16bit)

LED12(16bit Fine)

LED13(16bit)

LED13(16bit Fine)

LED14(16bit)

LED14(16bit Fine)

LED15(16bit)

LED15(16bit Fine)

LED16(16bit)

LED16(16bit Fine)

Master (16bit)

Master (16bit Fine)

Program

Program Speed

Program FadeTime

Dim Mode

22/16Bit

LED1&2(16bit)

LED1&2(16bit Fine)

LED3&4(16bit)

LED3&4(16bit Fine)

LED5&6(16bit)

LED5&6(16bit Fine)

LED7&8(16bit)

LED7&8(16bit Fine)

LED9&10(16bit)

LED9&10(16bit Fine)

LED11&12(16bit)

LED11&12(16bit Fine)

LED13&14(16bit)


LED15&16(16bit)


Master (16bit)

Master (16bit Fine)

Program

Program Speed

Program FadeTime

Dim Mode

14/16Bit

LED1&4(16bit)

LED1&4(16bit Fine)

LED5&8(16bit)

LED5&8(16bit Fine)

LED9&12(16bit)

LED9&12(16bit Fine)

LED13&16(16bit)


Master (16bit)

Master (16bit Fine)

Program

Program Speed

Program FadeTime

Dim Mode

10/16Bit

LED1&8(16bit)

LED1&8(16bit Fine)

LED9&16(16bit)

LED9&16(16bit Fine)

Master (16bit)

Master (16bit Fine)

Program

Program Speed

Program FadeTime

Dim Mode

DMX MAP

8/16Bit

LED1&16(16bit)

LED1&16(16bit Fine)

Master (16bit)

Master (16bit Fine)

Program

Program Speed

Program FadeTime

Dim Mode

22/8bit

LED 1

LED 2

LED 3

LED 4

LED 5

LED 6

LED 7

LED 8

LED 9

LED 10

LED 11

LED 12

LED 13

LED 14

LED 15

LED 16

Master (16bit)

Master (16bit Fine)

Program

Program Speed

Program FadeTime

Dim Mode

16/8Bit

LED 1

LED 2

LED 3

LED 4

LED 5

LED 6

LED 7

LED 8

LED 9

LED 10

LED 11

LED 12

LED 13

LED 14

LED 15

LED 16

14/8Bit

LED 1&2

LED 3&4

LED 5&6

LED 7&8

LED 9&10

LED 11&12

LED 13&14

LED 15&16

Master (16bit)

Master (16bit Fine)

Program

Program Speed

Program FadeTime

Dim Mode

10/8Bit

LED 1&4

LED 5&8

LED 9&12

LED 13&16

Master (16bit)

Master (16bit Fine)

Program

Program Speed

Program FadeTime

Dim Mode

8/8Bit

LED 1&8

LED 9&16

Master (16bit)

Master (16bit Fine)

Program

Program Speed

Program FadeTime

Dim Mode

7/8Bit

LED 1&16

Master (16bit)

Master (16bit Fine)

Program

Program Speed

Program FadeTime

Dim Mode

7 Channel Configuration (8 Bit)

CH1

LED 1-16

CH2

Master

Dimmer

0-255

(dim→

0-255

(dim→

CH3

Master Dim

Fine

16-bit

0-255

(dim→ bright) bright) bright)

CH4 CH5 CH6

Programs Program Speed Program Fade

0-255 0-255

(Slow→

Fast)

0-255

Less→

More)

CH7

Dim Mode

Standard (dr 1) 0-20

Stage (dr 2) 21-40

TV (dr 3)

41-60

Architectural

61-80

(dr 4)

Theatre (dr 5) 81-100

Default to Unit

Setting

101-255


CH1 CH2

LED 1-8

0-255

(dim→ bright)

LED 9-1

0-255

(dim→ bright)

6

CH3

Master

Dimmer

0-255

(dim→ bright)

CH4

Master Dim

Fine

16-bit

0-255

(dim→ bright)

CH5 CH6 CH7


0-255 0-255

(Slow→

Fast)

0-255

Less→

More)

CH8

Dim Mode


Stage (dr 2) 21-40

TV (dr 3)

41-60

Architectural

61-80

(dr 4)


Default to Unit

Setting

101-255


CH1

LED 1-4

CH2 CH3 CH4

LED 5-8 LED 9-12 LED 13-16

0-255

(dim → bright)

0-255

(dim → bright)

0-255

(dim → bright)

0-255

(dim → bright)

CH5

Master

Dimmer

0-255

(dim → bright)

CH6

Master Dim

Fine

16-bit

0-255

(dim → bright)

CH7

Programs

0-255

CH8

Program

Speed

0-255

(Slow →

Fast)

CH9

Program

Fade

0-255

Less →

More)

CH10

Dim Mode

Standard (dr

1)

0-20

Stage (dr 2) 21-40

TV (dr 3) 41-60

Architectural

(dr 4)

61-80

Theatre (dr

5)

Default to

Unit Setting

81-100

101-255


CH1 CH2 CH3

LED 1-2 LED 3-4 LED 5-6

0-255

(dim → bright)

0-255

(dim → bright)

0-255

(dim → bright)

CH4 CH5 CH6 CH7 CH8

LED 7-8 LED 9-10 LED 11-12 LED 13-14 LED 15-16

0-255

(dim → bright)

0-255

(dim → bright)

0-255

(dim → bright)

0-255

(dim → bright)

0-255

(dim → bright)

CH9

Master

Dimmer

0-255

(dim → bright)

CH10

Master Dim

Fine

16-bit

0-255

(dim → bright)

CH11

Programs

0-255

CH12

Program

Speed

0-255

(Slow →

Fast)

CH13

Program

Fade

0-255

Less →

More)

CH14

Dim Mode

Standard (dr

1)

0-20

Stage (dr 2) 21-40

TV (dr 3) 41-60

Architectural

(dr 4) 61-80

Theatre (dr

5)

Default to

Unit Setting

81-100

101-255


CH1

LED1

0-255

(dim→ bright)

CH2

LED2

0-255

(dim→ bright)

CH3

LED3

0-255

(dim→ bright)

CH4

LED4

0-255

(dim→ bright)

CH5

LED5

0-255

(dim→ bright)

CH6

LED6

0-255

(dim→ bright)

CH7

LED7

0-255

(dim→ bright)

CH8

LED8

0-255

(dim→ bright)

CH9

LED9

0-255

(dim→ bright)

CH10

LED10

0-255

(dim→ bright)

CH11

LED11

0-255

(dim→ bright)

CH12

LED12

0-255

(dim→ bright)

CH13

LED13

0-255

(dim→ bright)

CH14

LED14

0-255

(dim→ bright)

CH15

LED15

0-255

(dim→ bright)

CH16

LED16

0-255

(dim→ bright)


CH1 CH2

LED1

0-255

(dim → bright)

LED2

0-255

(dim → bright)

CH3

LED3

0-255

(dim → bright)

CH4

LED4

0-255

(dim → bright)

CH5

LED5

0-255

(dim → bright)

CH6

LED6

0-255

(dim → bright)

CH7

LED7

0-255

(dim → bright)

CH8

LED8

0-255

(dim → bright)

CH9

LED9

0-255

(dim → bright)

CH10

LED10

0-255

(dim → bright)

CH11

LED11

0-255

(dim → bright)

CH12

LED12

0-255

(dim → bright)

CH13

LED13

0-255

(dim → bright)

CH14

LED14

0-255

(dim → bright)

CH15

LED15

0-255

(dim → bright)

CH16

LED16

0-255

(dim → bright)

CH17

Master

Dimmer

0-255

(dim → bright)

CH18

Master Dim

Fine

16-bit

0-255

(dim → bright)

CH19 CH20 CH21


0-255 0-255

(Slow

Fast)

→

0-255

Less →

More)

CH22

Dim Mode


Stage (dr 2) 21-40

TV (dr 3)

41-60

Architectural

(dr 4) 61-80


Default to Unit

Setting

101-255


CH1

LED 1&16

(16bit)

CH2

LED 1&16

(16bit Fine)

CH3

Master

Dimmer

0-255

(dim→

0-255

(dim→

0-255


CH4

Master Dim

Fine

16-bit

0-255

(dim→ bright)

CH5

Programs

0-255

CH6

Program

Speed

0-255

(Slow→

Fast)

CH7

Program

Fade

0-255

Less→

More)

CH8

Dim Mode

Standard (dr

1)

0-20

Stage (dr 2) 21-40

TV (dr 3) 41-60

Architectural

(dr 4)

61-80

Theatre (dr

5)

Default to

Unit Setting

81-100

101-255


CH1

LED1&8

(16bit)

CH2

LED1&8

(16bit Fine)

CH3

LED9&16

(16bit)

0-255

(dim→

0-255

(dim→

0-255


CH4

LED9&16

(16bit Fine)

0-255

(dim→ bright)

CH5

Master

Dimmer

0-255

(dim→ bright)

CH6

Master Dim

Fine

16-bit

0-255

(dim→ bright)

CH7

Programs

0-255

CH8

Program

Speed

0-255

(Slow→

Fast)

CH9

Program

Fade

0-255

Less→

More)

CH10

Dim Mode

Standard (dr

1)

0-20

Stage (dr 2) 21-40

TV (dr 3) 41-60

Architectural

(dr 4)

61-80

Theatre (dr

5)

Default to

Unit Setting

81-100

101-255


CH1

LED1&4

(16bit)

CH2

LED1&4

(16bit Fine)

CH3

LED5&8

(16bit)

0-255

(dim → bright)

0-255

(dim → bright)

0-255

(dim → bright)

CH4

LED5&8

(16bit Fine)

0-255

(dim → bright)

CH5

LED9&12

(16bit)

0-255

(dim → bright)

CH6

LED9&12

(16bit Fine)

CH7

LED13&16

(16bit)

0-255

(dim → bright)

0-255

(dim → bright)

CH8

LED13&16

(16bit Fine)

0-255

(dim → bright)

CH9

Master

Dimmer

0-255

(dim → bright)

CH10

Master Dim

Fine

16-bit

0-255

(dim → bright)

CH11

Programs

0-255

CH12

Program

Speed

0-255

(Slow →

Fast)

CH13

Program

Fade

0-255

Less →

More)

CH14

Dim Mode

Standard (dr

1)

0-20

Stage (dr 2) 21-40

TV (dr 3) 41-60

Architectural

(dr 4)

Theatre (dr

5)

Default to

Unit Setting

61-80

81-100

101-255


CH1

LED1&2

(16bit)

0-255

(dim → bright)

CH2

LED1&2

(16bit Fine)

0-255

(dim → bright)

CH3

LED3&4

(16bit)

0-255

(dim → bright)

CH4

LED3&4

(16bit Fine)

0-255

(dim → bright)

CH5

LED5&6

(16bit)

0-255

(dim → bright)

CH6

LED5&6

(16bit Fine)

0-255

(dim → bright)

CH7

LED7&8

(16bit)

0-255

(dim → bright)

CH8

LED7&8

(16bit Fine)

0-255

(dim → bright)

CH9

LED9&10

(16bit)

0-255

(dim → bright)

CH10

LED9&10

(16bit Fine)

0-255

(dim → bright)

CH11

LED11&12

(16bit)

0-255

(dim → bright)

CH12

LED11&12

(16bit Fine)

0-255

(dim → bright)

CH13

LED13&14

(16bit)

0-255

(dim → bright)

CH14

LED13&14

(16bit Fine)

0-255

(dim → bright)

CH15

LED15&16

(16bit)

0-255

(dim → bright)

CH16

LED15&16

(16bit Fine)

0-255

(dim → bright)

CH17

Master

Dimmer

0-255

(dim → bright)

CH18

Master Dim

Fine

16-bit

0-255

(dim → bright)

CH19

Programs

0-255

CH20

Program

Speed

0-255

(Slow →

Fast)

CH21

Program

Fade

0-255

Less →

More)

CH22

Dim Mode

Standard (dr

1)

0-20

Stage (dr 2) 21-40

TV (dr 3) 41-60

Architectural

(dr 4)

Theatre (dr

5)

Default to

Unit Setting

61-80

81-100

101-255


CH1

LED1

(16bit)

0-255

(dim → bright)

CH2

LED1 (16bit

Fine)

0-255

(dim → bright)

CH3

LED2

(16bit)

0-255

(dim → bright)

CH4

LED2 (16bit

Fine)

0-255

(dim → bright)

CH5

LED3

(16bit)

0-255

(dim → bright)

CH6

LED3 (16bit

Fine)

0-255

(dim → bright)

CH7

LED4

(16bit)

0-255

(dim → bright)

CH8

LED4 (16bit

Fine)

0-255

(dim → bright)

CH9

LED5

(16bit)

0-255

(dim → bright)

CH10

LED5 (16bit

Fine)

0-255

(dim → bright)

CH11

LED6

(16bit)

0-255

(dim → bright)

CH12

LED6 (16bit

Fine)

0-255

(dim → bright)

CH13

LED7

(16bit)

0-255

(dim → bright)

CH14

LED7 (16bit

Fine)

0-255

(dim → bright)

CH15

LED8

(16bit)

0-255

(dim → bright)

CH16

LED8 (16bit

Fine)

0-255

(dim → bright)

CH17

LED9

(16bit)

0-255

(dim → bright)

CH18

LED9 (16bit

Fine)

0-255

(dim → bright)

CH19

LED10

(16bit)

0-255

(dim → bright)

CH20

LED10

(16bit Fine)

0-255

(dim → bright)

CH21

LED11

(16bit)

0-255

(dim → bright)

CH22

LED11

(16bit Fine)

0-255

(dim → bright)

CH23

LED12

(16bit)

0-255

(dim → bright)

CH24

LED12

(16bit Fine)

0-255

(dim → bright)

CH25

LED13

(16bit)

0-255

(dim → bright)

CH26

LED13

(16bit Fine)

0-255

(dim → bright)

CH27

LED14

(16bit)

0-255

(dim → bright)

CH28

LED14

(16bit Fine)

0-255

(dim → bright)

CH29

LED15

(16bit)

0-255

(dim → bright)

CH30

LED15

(16bit Fine)

0-255

(dim → bright)

CH31

LED16

(16bit)

0-255

(dim → bright)

CH32

LED16

(16bit Fine)

0-255

(dim → bright)

CH33

Master

Dimmer

0-255

(dim → bright)

CH34

Master Dim

Fine

16-bit

0-255

(dim → bright)

CH35

Programs

0-255

CH36

Program

Speed

0-255

(Slow →

Fast)

CH37

Program

Fade

0-255

Less →

More)

CH38

Dim Mode

Standard (dr

1)

0-20

Stage (dr 2) 21-40

TV (dr 3) 41-60

Architectural

(dr 4)

Theatre (dr

5)

Default to

Unit Setting

61-80

81-100

101-255

DIMMER

100%

DIMMING CURVE MODES

50%

10%

0%

0 Sec Rise Time Down Time

Time (ms)

0 sec Fade Time

Dimming Curve

Ramp Effect

Standard (default)

Stage

TV

Architectural

Theatre

0

Rise Time (ms)

0

780

1180

1380

1580

255

1 sec Fade Time

Down Time (ms)

0

1100

1520

1730

1940

0

Rise Time (ms)

0

1540

1860

2040

2230

255

Down Time (ms)

0

1660

1940

2120

2280

No results