Jeep

®

Classic Duo

Rocker/Toddler Seat

Instructions

by

2

WARNING

Please take a moment to read through these instructions before you use your Jeep

®

Rocker/Toddler Seat

Important Safety Information:

• NEVER leave your child unattended while in this seat.

• ALWAYS hold the stroller when your child is climbing into the seat.

• NEVER leave the stroller at rest (parked) with a toddler in the seat.

• ALWAYS use the harness, correctly fitted and adjusted, when using this seat.

• NEVER use the seat if the child is unwilling to sit in it.

• ALWAYS be aware of your child’s position when sitting in the toddler seat/rocker.

• Excessive leaning to one side may, while the stroller is cornering, cause the unit to become unstable.

• MAXIMUM WEIGHT of the toddler in this seat is 20kgs on the stroller and 9kg on the rocker.

• NEVER use this as a toddler seat with a child under 3 months of age and/or is unable to sit up unassisted.

• NEVER use this toddler seat with any other brand of stroller

• Only use this toddler seat with the correct model Jeep Classic Duo

Stroller.

• ALWAYS secure the toddler seat to the stroller frame with the clip on the footrest and the tabs that snap onto the stroller sides.

• ALWAYS check all seat parts before use, for breakage or fatigue.

Discontinue use immediately if any part is found to be damaged or broken.

FAILURE TO FOLLOW THE CORRECT ASSEMBLY AND USAGE

INSTRUCTIONS MAY BE HAZARDOUS TO YOUR CHILD AND/OR CAUSE

DAMAGE TO THE CONSTRUCTION OF YOUR STROLLER.

3

4

Rocker/Toddler Seat Parts

Rocker/Toddler seat Toy bar

Bumper bar Rocker frame Canopy

5

To attach the toddler seat onto the rocker base frame

1

Place the toddler seat tabs onto the rocker base frame.

2

Making sure that the tabs are placed over the protruding screws until the seat is fixed firmly onto the rocker base frame.

6

3

Position front bar of rocker/ toddler seat into the tab on the front of the rocker frame.

Please Note: If seat is not fixed properly onto the frame it could move forward and become dangerous.

To Attach Canopy

1

Place the two ends of the canopy into the slots in the rocker/toddler seat and click into place.

To Remove Canopy: Push the raised area in and pull the canopy out of the slots.

To Attach toy bar

1

Push and click the ends of the toy bar over the rocker/toddler seat frame.

Please Note: Toy bar is not designed to be used as a carry handle.

7

To Position Toddler Seat on Stroller

1

2

Remove the bumper bar from the stroller.

Place the toddler seat tabs onto the stroller frame making sure that the tabs are placed over the protruding screws.

Snap tabs in place.

Please note: If the seat is not fixed properly onto the stroller frame it could move forward and become dangerous.

3

Pull back clip on footrest.

Place toddler seat bar into clips and snap into place.

8

To Recline Toddler Seat

1

Pull handle up and pull back on the toddler seat.

2

Adjust to desired position.

To Attach bumper bar

1 Push bumper bar onto the arms of the toddler seat/rocker until they click into place.

To remove bumper bar:

Push leavers in and slide off.

Please Note: We recommend that the bumper bar remains fixed while used as a rocker.

9

There are many ways to look after and protect your Jeep

®

stroller. The most important is to clean up any spills or food, before it dries on the fabric.

As the covers are not designed to be easily taken off for washing, (for safety reasons) the easiest method to clean is, sponge the surfaces with a mild solution of warm water liquid laundry detergent. Rinse well with clean sponge and leave to dry out of direct sun.

Sand and Salt water should be rinsed with a hose and wiped dry to prolong the life of the wheels, axles and other moving parts.

Never use petroleum based lubricants on your stroller, the most suitable lubricants are silicone based products.

Warranty

Jeep

®

2007.

is a registered trademark of DaimlerChrysler Corporation, and is used under license by Born With Style. ©DaimlerChrysler Corporation

Born With Style warrants this product to be free of defects in materials and workmanship as follows: For a period of ONE YEAR from the date of purchase, Born With Style will repair or replace, at its option, the defective product. This warranty is given in addition to (and not in substitute for) applicable statutory rights which you may have.

We sincerely thank you for purchasing this Born With Style product.

For further information visit: www.bornwithstyle.com.au

10

For all spare parts, repairs or warranty issues, please contact:

Karlisles

Phone: 1300 308 435

Email:

Web: [email protected]

www.karlisles.com.au

Replacement parts provided by local distributor due to accidental damage or misuse will be charged accordingly.

To contact the manufacturer directly:

Born With Style

PO Box 789

Gladesville NSW 1675, Australia

Phone: 1300 855 337 or 02 9816 3837

Email:

Web: [email protected]

www.bornwithstyle.com.au

This product meets and exceeds Australian Standard

AS/NZS 2088:2000 when used as a Toddler Seat on the Jeep Classic

Duo Stroller. When used as a Rocker this product meets and exceeds standard EN12790.

Personal Record Card

Born With Style recommends that you keep a record of important information about your Jeep in the space provided.

®

stroller. Please complete the information

Model Number:

Date of Manufacture:

Date of Purchase:

11