TomTom GO Quick Start Guide
TomTom GO is a state-of-the-art GPS navigation system designed to make your journeys easier and more efficient. With its intuitive interface, real-time traffic updates, and advanced routing capabilities, TomTom GO will guide you to your destinations quickly and safely. Find the best routes, avoid traffic jams, and explore new places with ease, all while staying connected with your business.
Anuncio
Anuncio
toc_murcia_eu.fm Page 2 Friday, December 8, 2006 12:06 PM
Tom
Quic t Gui
toc_murcia_eu.fm Page 3 Friday, December 8, 2006 12:06 PM
TomTom GO Quick Start Guide
EN
DE
FR
NL
IT
ES
PT
English
Deutsch
Français
Nederlands
Italiano
Español
Português
Addendum
88
116
4
32
60
144
172
200
Find your way the easy way
Murcia.book Page 4 Thursday, December 7, 2006 5:33 PM
EN
What’s in the box
What’s box a Your TomTom GO
C D E
G b Windscreen dock
A
Audio out connector
B
External microphone connector
C External antenna connector
D
Power connector
E
TomTom connector
A On/off button
B Microphone
C Release button
D Charging light
E Light sensor
F Reset button
G Speaker
H Memory card slot
I SIM card slot
H I
4
Murcia.book Page 5 Thursday, December 7, 2006 5:33 PM c Home dock
What’s in the box
d Car charger
EN
A Home charger connector
B USB connector e
Product code card f
Carry case g Home charger i
External microphone h Documentation pack j
Memory card (SD card)
5
Murcia.book Page 6 Thursday, December 7, 2006 5:33 PM
EN
Welcome
Wel e
Your TomTom GO will help you to manage your work and keep in contact with your office.
For example, your office can send you orders, including information about what you have to do and where you need to go.
You can then do the following:
• Select and read orders from a list.
• Accept or reject an order.
• Start navigating immediately to an order.
• Report on the status of an order.
• Send text and status messages to your office.
• Register when you are working and when you take a break.
Use the safety preferences
When using your GO, we recommend using the Safety preferences from the Preferences menu.
Safety preferences
You can choose to use the safety lock. If the safety lock is enabled, only a few buttons and features are available while you are driving.
When you are stationary, all the buttons and features are available.
You can also choose to turn the map display off.
Attaching your Windscreen Dock
It is very important to attach the Windscreen
Dock properly to your windscreen and also to put it in a good place. The installation poster shows how to attach the dock to your windscreen. Some tips for attaching the
Windscreen Dock:
• Make sure your windscreen is clean and dry before trying to attach the dock.
• Place the dock so it does not block your view of the road in any way. But make sure the dock is placed so that it is close to your line of sight while you are looking at the road. In this way you can glance at the screen easily while driving.
• Place the dock so that you don’t have to reach to touch the screen. You should be able to tap the screen easily while driving.
• Attach the dock to an area of the windscreen where the glass is flat, not curved.
6
Murcia.book Page 7 Thursday, December 7, 2006 5:33 PM
Important information
Warning
When you switch off your TomTom GO, the
GSM module does not switch off immediately.
Import ation
After you switch your TomTom GO off, the
GSM module stays on for the times below:
• 15 minutes - if you remove your
TomTom GO from the Windscreen
Dock.
• 2 hours - if you leave your TomTom GO docked.
A GSM module can interfere with electrical devices such as cardiac pacemakers, hearing aids and aviation equipment.
Interference with these devices may endanger the health or life of others.
Do not use near unprotected electrical units nor in areas where the use of mobile telephones is prohibited, such as hospitals and airplanes.
The SIM card
Please note that the removal of your SIM card from your TomTom GO may result in a loss of data, and we therefore recommend that you do not remove the SIM card from your GO.
TomTom shall not be liable in any way for any loss of data resulting from the removal of the
SIM card from your TomTom GO.
Odometer and position tracking
Your TomTom GO has an odometer for recording the distance you travel. It only works when your TomTom GO is docked.
Your vehicle’s position is also only sent to
TomTom WEBFLEET when your GO is docked.
GPRS coverage
If you are in an area where there is no GPRS coverage, any messages sent by you or to you are stored. All stored messages will be sent once the GPRS connection is available again.
To check the GPRS coverage, tap the GPRS connection indicator in the Driving View.
7
EN
Murcia.book Page 8 Thursday, December 7, 2006 5:33 PM
EN
Before you start...
Befo start
Everyone loves TomTom GO
So never leave your GO in your car when you’re not using it - it’s an easy target for thieves.
Always take your GO, the windscreen mount, and the car charger with you; don’t leave any
TomTom products on display.
Always store your GO in the carry case to protect the screen.
Backup your TomTom GO
It’s always a good idea to make a backup of the contents of your TomTom GO. You can make a backup using TomTom HOME.
Take care of your TomTom GO
It is important to take care of your GO and to clean it correctly.
• Use a soft cloth to wipe the screen of your
GO; do not use any liquid cleaners.
• If your GO gets wet, dry it with a soft cloth.
• Do not open the casing of your GO under any circumstances. Doing so may be dangerous and will invalidate your warranty.
• Do not use the memory card (SD card) with any device other than a TomTom device.
Other devices may damage the memory card.
• Do not expose your GO to high or low temperatures, which can cause permanent damage. For example, don’t leave it in the car on hot summer days or during cold winter nights.
8
Murcia.book Page 9 Thursday, December 7, 2006 5:33 PM
Getting started
Switching on
Follow the instructions on the Installation
Poster to dock your TomTom GO in your car.
The first time you switch on your
TomTom GO, it may take up to 20 seconds to start. To switch off your TomTom GO, press and hold the On/Off button for 2 seconds.
Setting up
You have to answer a few questions to set up your TomTom GO. Answer the questions by tapping the screen. You will use the touchscreen for everything you do with your
GO.
Once you have answered the questions, your
GO will display the Driving View. The Driving
View is shown in black and white until your GO locates your current position.
For more information about the Driving View, see Driving View on page 10.
Locating your current position
Your TomTom GO must be outdoors to locate your current position. The first time you start your GO, it can take up to 5 minutes to find your current position. If it takes longer than 5 minutes, make sure that you are in an open place without tall buildings or trees around you.
In the future, your position will be found much faster, normally within a few seconds.
Once your GO has located your current position, the Driving View is shown in full colour and shows your position on the map.
Note : Some vehicles have a heat reflective shield embedded in the windscreen, which may prevent
TomTom GO from locating your current position.
If this is a problem in your vehicle, use the
TomTom External Antenna Kit (available as an accessory).
EN
9
EN
Murcia.book Page 10 Thursday, December 7, 2006 5:33 PM
Driving View
10
A Buttons to zoom in and zoom out on your position.
B Button that shows when a new message or order is received. Tap the envelope to open the message or order.
C
Your current position.
D The name of the next major road or road sign information, if applicable.
E Button that shows whether you are on a business trip or private trip, or the status of an order. Tap the button to change the status. Some of the buttons are explained below.
F
The next instruction.
This area shows you what to do and when you will have to do it.
Tap this area to repeat the last spoken instruction and to change the volume.
G The name of the next street to turn onto.
H
Information about your journey.
I Indicator for the GPRS connection
Shows whether your TomTom GO has a
GPRS connection. Tap the indicator for information about the GPRS coverage.
J Indicator of the strength of the GPS signal.
Murcia.book Page 11 Thursday, December 7, 2006 5:33 PM
The buttons below can all be shown on the left-hand side of the Driving View. Tap one of these buttons to bring up the details or to change the settings.
New order or message
... signifies that you have new unread orders or messages.
Status of order
... signifies the status of the current order when you are on a business trip or in working time. Each status has a different icon.
Private trip
... signifies that you are on a private trip. This icon only appears when ’Change logbook mode’ is activated.
Break
... signifies that you have a break. This icon only appears if ’Report work time’ on your TomTom GO is activated.
End of work
... signifies that you have finished work.
11
Driving View
Locating disabled
... signifies that the locating of your vehicle is disabled when you are on private trips, you have a break or have finished work (only when activated by the office).
EN
EN
Murcia.book Page 12 Thursday, December 7, 2006 5:33 PM
Menus
Menus Main menu
Tap the screen at any time when TomTom GO displays the Driving View to open the Main
Menu.
• Navigate to...
Tap this button to start planning a route.
• Find alternative...
Tap this button if you want to avoid part of your route, travel via a specific location or calculate an alternative route.
• Show orders
Tap this button to read and work with messages and orders sent by your office.
• Report to office
Tap this button to send messages to your office.
• Change preferences
This button opens the Preferences menu.
You can change many things about the way TomTom GO looks and behaves.
12
Murcia.book Page 13 Thursday, December 7, 2006 5:33 PM
The office can send service, delivery and pickup orders. They will be stored on your
Orders ges
TomTom GO, so that you can read and deal with them at any time. These three kinds of orders are marked differently. You can find them under Show orders .
These symbols show the type and status of items in your list of orders and messages:
Orders and messages
EN
New text message
Text message that has been read
New service order
Service order in progress
Suspended service order
Finished service order
Cancelled or rejected service order
New delivery or pick up order
(compare to the symbol for service orders)
13
EN
Murcia.book Page 14 Thursday, December 7, 2006 5:33 PM
Orders and messages
Working on orders
When you receive a new message or order, an envelope is shown in the Driving view. Tap the envelope to open the message or order. If you have received more than one new message, the latest message will be displayed first.
You will also find all your orders and messages in a list under Show orders .
1. Tap the screen to bring up the Main Menu.
2. Tap Show orders .
3. Select an order from the list.
4. To start working on this order tap I agree .
(This is configurable by the office.)
To reject the order tap Options , then tap
Reject order . You can enter a reason for rejecting the order.
If you have agreed, you are asked to start this order. If the order contains destination data, you will be asked to start navigation.
As soon as you start the order, you can report your current activities. Tap the button that shows your activity to report. Tap Status to report to your office by using the status messages defined by the office. To do this, tap
Status and proceed as explained under
'Report to office'.
14
Murcia.book Page 15 Thursday, December 7, 2006 5:33 PM
Suspend and change orders
1. To quickly suspend the current order, select it from the list or tap the order button in the Driving View.
2. Tap Options .
3. Tap Suspend .
Switching to another order
1. If you want to switch to another order, select the new order from the list.
2. Then you will be asked to suspend the current order and start working on the new one.
You will always be able to continue working on the suspended order. To do so, select the suspended order from the list and tap
Resume .
Cancelling orders
1. If you want to cancel an order, first select the order.
2. Tap Options .
3. Tap Cancel .
You will be asked to enter a reason for cancelling the order.
Orders and messages
EN
15
EN
Murcia.book Page 16 Thursday, December 7, 2006 5:33 PM
Report to office
Report office
Send text message
To send a text message to your office, do the following.
1. Tap Report to office in the Main Menu.
2. Tap Send text message .
3. Enter your message.
4. Tap Done to send the message to the office.
Enter your message using the keyboard and the following buttons:
Tap this button to enter capital letters
Tap this button to enter lowercase letters
Tap this button to switch to the numeric/special characters keyboard
Tap this button to switch back to alphabetic keyboard
Tap this button to delete single characters
16
Murcia.book Page 17 Thursday, December 7, 2006 5:33 PM
Send status message
Status messages must be defined by your office. You can select the appropriate message and send it as it is, or you can add information.
To send a status message, do the following:
1. Tap Report to office in the Main Menu.
2. Tap Send status message .
3. Select a status message from the list by tapping it.
If you want to add information, tap Edit . If not tap Send to send the message directly to the office.
4. Tap Send to send the message to your office with any information you have added.
Report to office
EN
17
EN
Murcia.book Page 18 Thursday, December 7, 2006 5:33 PM
Planning a route
Plannin route
Planning a route with TomTom GO is very simple. If you need to navigate to a destination without an order, you can plan a route.
Note : You should always plan your journeys before you start driving. It is dangerous to plan routes when you are already moving.
1. Tap the screen to bring up the main menu.
2. Tap Navigate to...
For your first journey, we will navigate to an address.
3. Tap Address .
When you enter an address, you can choose from four options:
• City centre - tap this button to set your destination as the centre of a city or town.
• Street and house number - tap this button to set an exact address as your destination.
• Postcode - tap this button to enter a postcode as your destination (fully supported only in UK and the
Netherlands).
• Crossing or intersection - tap this button to set your destination as the point where two streets meet.
For your first journey, we will enter an exact address.
4. Tap Street and house number .
18
Murcia.book Page 19 Thursday, December 7, 2006 5:33 PM
5. Start to type the name of the town where you want to go.
As you type, the names of the towns that match what you have typed are shown.
When your destination is shown in the list, tap the name of the town to set the destination.
6. Start to type the name of the street.
As with the name of the town, the names of the streets that match what you have typed are shown. When your destination is shown in the list, tap the name of the street to set the destination.
7. Now enter the house number of your destination and then tap Done .
8. GO asks you whether you need to arrive at a particular time.
Tap YES to enter an arrival time. GO shows you whether you will arrive on time.
The route is then calculated by your
TomTom GO.
9. When the route has been calculated, tap
Done .
TomTom GO will immediately start guiding you to your destination with spoken instructions and visual instructions on the screen.
Note : Before you can plan a route in this way,
TomTom GO must first locate your current position.
19
Planning a route
EN
EN
Murcia.book Page 20 Thursday, December 7, 2006 5:33 PM
Report work time
Report time
Using your TomTom GO you can report your general working status. You can report the time you start and finish work, and time you spend having a break.
Driver ID
First you have to enter your Driver ID.
Note : Your office can configure via TomTom
WEBFLEET, that you have to enter your Driver ID each time you switch on your TomTom GO.
1. Tap the screen to bring up the Main Menu.
2. Tap Change preferences .
3. Tap Change Driver ID .
4. Enter your Driver ID, then tap Done .
Your Driver ID will be saved and used for all reports until you change it.
20
Murcia.book Page 21 Thursday, December 7, 2006 5:33 PM
Report work time
To report work times to TomTom WEBFLEET, do the following:
1. Tap the screen to bring up the Main Menu.
2. Tap Report work time .
3. Tap the appropriate button to change your work status.
When you tap Finish work , this will be indicated in the Driving View.
If you are working on an order, the current order status is shown in the Driving View.
Note : In the Main Menu either the button Report work time or Change logbook mode is available.
These functions are activated using TomTom
WEBFLEET by your office.
Report work time
EN
21
EN
Murcia.book Page 22 Thursday, December 7, 2006 5:33 PM
Change logbook mode
Change k mode
You can generate a driver’s logbook with your
TomTom GO.
Important
• Do not use your TomTom GO in different vehicles.
• Sychronize the odometer value on every start.
• Your TomTom GO does not record trips when it is switched off. This will be designated as private use.
To change the kind of trip do the following:
1. Tap the screen to bring up the Main Menu.
2. Tap Change logbook mode .
Note : Either the button Report work time or
Change logbook mode is available. Both cannot be available at the same time.
3. Select the appropriate mode.
The current logbook mode is shown in the bottom half of the screen, as well as journey specific information.
If the logbook mode is set to Private trip or
Commute to work , this is shown in the Driving
View. During a business trip, the current order status is shown.
22
Murcia.book Page 23 Thursday, December 7, 2006 5:33 PM
When you use the logbook, each time you switch on your TomTom GO the odometer is shown. You can then synchronize the odometer in your TomTom GO with your vehicle’s odometer.
You can also adjust the odometer using the logbook:
1. Tap the screen to bring up the Main Menu.
2. Tap Change logbook mode .
3. Tap Adjust .
4. Tap the buttons to adjust the odometer to match your vehicle’s odometer.
Important
The odometer on your TomTom GO only measures the distance you travel when it is docked in the Windscreen Dock.
Change logbook mode
EN
23
EN
Murcia.book Page 24 Thursday, December 7, 2006 5:33 PM
Call contact
Orders can contain a contact name and a telephone number. You can call this number from your TomTom GO.
Note : To call contacts you need a mobile phone with Bluetooth® that is compatible with your
TomTom GO.
1. Tap the screen to bring up the Main Menu.
2. Tap Show orders .
3. Select an order from the list.
4. Tap Options .
5. Tap Call .
6. Tap the contact name to call the contact using your TomTom GO.
24
Murcia.book Page 25 Thursday, December 7, 2006 5:33 PM
TomTom Traffic
TomTom Traffic is a TomTom PLUS service that sends up-to-date traffic information to your GO.
TomTo
Traffic
TomTom Traffic takes the most up-to-date information from the best local sources.
Note : TomTom Traffic is not available in all countries or areas. Visit www.tomtom.com/plus to check availability in your country.
Setting up TomTom Traffic
1. Tap TomTom Traffic in the Main Menu.
2. Tap Enable Traffic .
Updating traffic information
With TomTom Traffic, there are two ways to update the traffic information:
• Tap Update traffic info in the Traffic menu.
• Set Traffic to be updated automatically at regular intervals.
To do this, tap Change Traffic preferences in the Traffic menu. Select Automatically update traffic info while on route , then tap
Done .
25
TomTom Traffic
EN
Murcia.book Page 26 Thursday, December 7, 2006 5:33 PM
EN
Using your TomTom ONE
Usin
Tom
E
ON
Using the map
Every time you use your TomTom ONE to plan a route, you are using the map. However, you can use the map in many other ways.
To open the map, tap Browse map in the Main
Menu .
Place your finger on the screen and drag it across the screen to move the map.
A The scale bar
B
Your current position
C GPS button.
Tap this button to centre the map on your current position.
D
The Options button
Use the Options button to set what is shown on the map.
E The cursor
F
The Find button
Tap this button to find specific addresses and Points of Interest on the map.
G The Cursor button
Tap this button to navigate to the cursor position, make a Favourite of the cursor position, or find a Point of Interest near the cursor position.
H
The zoom bar.
Change the scale of the map by moving the zoom bar up or down.
26
Murcia.book Page 27 Thursday, December 7, 2006 5:33 PM
Changing what you see
Tap Change preferences in the Main Menu .
You can change many things about the way the screen looks, for example:
Tap this button to reduce the brightness and use darker colours on the map.
Use Night colours
Turn off 3D display
Tap this button to view the map from above while you are navigating.
To switch back to the 3D view, tap it again.
Enable/ disable POIs
Tap this button to set which categories of
Points of Interest (POIs) should be shown on the map.
Tap the arrow to open the next page of buttons.
Using your TomTom ONE
Choosing a voice
You can change the voice by tapping Change voice in the Preferences menu.
Change voice
Turning off the sound
You can turn the sound off by tapping this button. To turn it on again, tap the button again.
Turn off sound
EN
27
EN
Murcia.book Page 28 Thursday, December 7, 2006 5:33 PM
Hands-free calling
Tips
• Make sure that you switch on
Bluetooth® on your phone.
• Make sure that your phone is set to
‘discoverable’ or ‘visible to all’.
• You may have to enter the password
‘0000’ on your phone in order to connect to your TomTom GO.
• Make your TomTom GO a trusted device on your phone. Otherwise you have to enter ‘0000’ every time.
See your phone’s user guide for information about Bluetooth® settings.
Handscalling
If you have a mobile phone with Bluetooth®, you can use your TomTom GO to make phone calls and send and receive messages while you are driving.
Note : Not all phones are supported or compatible with all features. For more information, visit www.tomtom.com/phones
Connecting to your phone
First you must establish a connection between your mobile phone and your TomTom GO.
You only have to do this once. Your
TomTom GO remembers your phone.
Tap Mobile phone in the Main Menu , then follow the instructions on the screen.
Setting up TomTom PLUS
After you have established a connection with your phone, you can set up a wireless data connection for TomTom PLUS services.
28
Murcia.book Page 29 Thursday, December 7, 2006 5:33 PM
Hands-free calling
Making a call
Once you have established a connection with your phone, you can start making calls.
1. Tap Mobile phone in the Main Menu.
2. Tap Call .
Note : Make sure that your phone is currently selected. The current phone is shown at the bottom of the screen.
3. Tap Number to enter a number to call.
Receiving a call
If someone calls you while you are driving, accept or reject the call by tapping the screen.
Auto-answer
You can tell your TomTom GO to answer every call automatically after a certain time.
Tap Phone preferences in the mobile phone menu, then tap Auto-answer preferences .
Select when your TomTom GO will automatically answer your calls.
Sharing your TomTom GO
You can establish connections with up to 5 mobile phones. To add more phones, do the following
1. Tap Mobile phone in the Main Menu.
2. Tap Connect to your phone .
3. Tap Find other phone...
and follow the instructions on the screen.
To switch between phones, tap Connect to your phone and then select your phone from the list.
EN
29
Murcia.book Page 30 Thursday, December 7, 2006 5:33 PM
EN
How does navigation work?
How navi wor
Global Positioning System (GPS)
In order to navigate you to your destination, your TomTom GO must know where you are now. To find your current position, your
TomTom GO uses the Global Positioning
System (GPS). GPS is available for free and without subscription.
The GPS uses satellites to transmit signals to
GPS receivers. Your TomTom GO has a builtin GPS receiver. Using the GPS signal, your
TomTom GO can work out where you are and how fast you are going. GPS signals work in all weather, anywhere in the world.
Maps
Once your GO knows where you are and you have told it where you want to go, it uses the digital map on the memory card to work out the best route to your destination.
30
Murcia.book Page 31 Thursday, December 7, 2006 5:33 PM
TomTom limited warranty
TomTo warrant
WARRANTOR
Non-U.S. and non-Canadian purchases: If you have made your purchase outside the United States and Canada, this Limited Warranty is granted by and this Limitation of Liability is stipulated for the benefit of TomTom
International B.V., Rembrandtplein 35, 1017 CT Amsterdam (The
Netherlands).
WHAT THIS WARRANTY COVERS
1) TomTom International B.V. (“TomTom”) warrants to you that the
Hardware will be free from defects in workmanship and materials under normal use (“Defects”) for a period of two (2) years from the date that the
Hardware was first purchased by you (“Warranty Period”). During the
Warranty Period the Hardware will be repaired or replaced at TomTom’s choice (“Limited Warranty”) without charge to you for either parts or labour. This Limited Warranty covers the replacement of the Hardware only. If the Hardware is repaired after the Warranty Period has expired, the
Warranty Period for the repair will expire six (6) months after the date of repair.
WHAT THIS WARRANTY DOES NOT COVER
2) The Limited Warranty does not apply to normal wear and tear, does not apply when the Hardware is opened or repaired by someone not authorized by TomTom and does not cover repair or replacement of any
Hardware or part thereof damaged by: misuse, moisture, liquids, proximity or exposure to heat and accident, abuse, non-compliance with the instructions supplied with the Hardware, neglect or misapplication.
The Limited Warranty does not cover physical damage to the surface of the
Hardware. This Limited Warranty does not cover any software that may accompany or be installed on the Hardware.
HOW TO MAKE A WARRANTY CLAIM
3) In order to make a claim of a Defect, you must contact TomTom by email during the Warranty Period via www.tomtom.com to explain the Defect and to obtain an RMA number (Return Materials Authorization) if necessary. You must return the Hardware during the Warranty Period, along with an explanation of the Defect, to the address provided to you by
TomTom. If a defect arises and a valid claim under this Limited Warranty is received by TomTom after the first one hundred and eighty (180) days of the Warranty Period, TomTom is entitled to charge you for any reasonable shipping and handling costs made in connection with the repair or replacement of the Hardware. You must comply with any other return procedures stipulated by TomTom, if any.
YOUR LEGAL RIGHTS
4) Some countries may not allow the exclusion or limitation of damages. If any part of this Limited Warranty is held to be invalid or unenforceable, the remainder of the Limited Warranty shall nonetheless remain in full force and effect.
5) This Limited Warranty is the only express warranty made to you and is provided in lieu of any other express warranties or similar obligations (if any) created by any advertising, documentation, packaging, or other communications.
6) Except for the Limited Warranty and to the maximum extent permitted by applicable law, TomTom and its suppliers provide the Hardware “AS IS
AND WITH ALL FAULTS”, and hereby disclaim all other warranties and conditions, whether express, implied or statutory, including, but not limited to, any (if any) implied warranties, duties or conditions of satisfactory quality, of fitness for a particular purpose, of reliability or availability, of accuracy or completeness of responses, of results, of workmanlike effort, of lack of viruses, and of reasonable care and skill, all with regard to the Hardware, and the provision of or failure to provide support or other services, information, software, and related content through the Hardware or otherwise arising out of the use of the Hardware.
Also, there is no warranty or condition of quiet enjoyment, quiet possession, or non-infringement with regard to the Hardware. This exclusion does not apply to (i) any implied condition as to title and (ii) any implied warranty as to conformity with description.
7) This Limited Warranty does not affect any legal rights under applicable national legislation governing the sale of consumer goods.
8) This Limited Warranty cannot be transferred to any other person.
LIMITATION OF LIABILITY
9) Neither TomTom nor its suppliers shall be liable to you or to any third party for any damages either direct, indirect, incidental, consequential or otherwise (including in each case, but not limited to, damages for the inability to use the equipment or access data, loss of data, loss of business, loss of profits, business interruption or the like) arising out of the use of or inability to use the Hardware even if TomTom has been advised of the possibility of such damages.
10) Notwithstanding any damages that you might incur for any reason whatsoever (including, without limitation, all damages referenced herein and all direct or general damages in contract or anything else), the entire liability of TomTom and any of its suppliers shall be limited to the amount actually paid by you for the Hardware.
11) TomTom shall not be liable for (i) any fraud on the part of its employees and/or agents; or (ii) any fraudulent misrepresentation on the part of its employees and/or agents.
12) Notwithstanding the above, neither party’s liability for death or personal injury resulting from its own negligence shall be limited.
31
EN
Murcia.book Page 32 Monday, December 11, 2006 9:22 AM
DE
Packungsinhalt
t gsinhal a
Ihr TomTom GO
C D E
G b Frontscheiben-halterung
A
Audioausgang
B
Anschluss für externes
Mikrofon
C Anschluss für externe
Antenne
D
Stromanschluss
E
TomTom-Anschluss
A Ein/Aus-Taste
B Mikrofon
C Entriegelung
D Lade-LED
E Lichtsensor
F Reset-Taste
G Lautsprecher
H Speicherkartenslot
I SIM-Kartenslot
H I
32
Murcia.book Page 33 Monday, December 11, 2006 9:22 AM c PC-Dockingstation d Autoladegerät
Packungsinhalt
DE
A Anschluss für stationäres Ladegerät
B USB-Anschluss e
Produktcode-Karte f
Tragetasche g Stationäres
Ladegerät i
Externes Mikrofon h Dokumentation j
Speicherkarte (SD-Karte)
33
Murcia.book Page 34 Monday, December 11, 2006 9:22 AM
DE
Willkommen
Will men
Ihr TomTom GO hilft Ihnen, Ihre Arbeit zu organisieren und im Kontakt mit Ihrer Zentrale zu bleiben.
Ihre Zentrale kann Ihnen zum Beispiel Aufträge mit Informationen senden, die Ihnen erklären, wohin Sie fahren und welche Arbeiten Sie ausführen müssen.
Sie können dann folgende Aktionen ausführen:
• Aufträge aus einer Liste auswählen und lesen.
• Einen Auftrag annehmen oder ablehnen.
• Sofort die Navigation zum Auftragsort starten.
• Den Status eines Auftrags melden.
• Text- und Statusmeldungen an Ihre
Zentrale senden.
• Erfassen, zu welchen Zeiten Sie arbeiten oder eine Pause einlegen.
Nutzen Sie die Sicherheitseinstellungen
Wir empfehlen Ihnen, bei der Nutzung Ihres
GO die Sicherheitseinstellungen im Menü
Einstellungen zu verwenden.
Sicherheitseinstellungen
Hier können Sie eine Sicherheitssperre aktivieren. Wenn die Sicherheitssperre eingeschaltet ist, bietet das Hauptmenü während der Fahrt nur wenige Schaltflächen und
Funktionen. Bei stillstehendem Fahrzeug sind alle
Schaltflächen und Funktionen verfügbar.
Sie können auch die
Kartenanzeige deaktivieren.
Anbringen der Frontscheibenhalterung
Es ist sehr wichtig, dass Sie die
Frontscheibenhalterung wie vorgesehen an einer geeigneten Stelle der
Windschutzscheibe anbringen. Das
Installation Poster zeigt, wie die Halterung an der Windschutzscheibe angebracht wird.
Einige Tipps zum Anbringen der
Frontscheibenhalterung:
• Achten Sie darauf, dass die
Windschutzscheibe sauber und trocken ist, bevor Sie die Halterung anbringen.
• Befestigen Sie die Halterung so, dass Ihre
Sicht auf das Verkehrsgeschehen in keiner
Weise beeinträchtigt wird. Stellen Sie jedoch sicher, dass Sie die Halterung so anbringen, dass sie sich in der Nähe Ihres
Sichtfelds befindet, während Sie auf das
Verkehrsgeschehen achten. Dadurch können Sie das Display beim Fahren mit einem Blick ablesen.
• Befestigen Sie die Halterung so, dass Sie den Touchscreen antippen können, ohne sich dazu vorbeugen zu müssen. Sie sollten den Touchscreen beim Fahren jederzeit mühelos antippen können.
• Befestigen Sie die Halterung an einem flachen (nicht gekrümmten) Bereich der
Windschutzscheibe.
34
Murcia.book Page 35 Monday, December 11, 2006 9:22 AM
Wichtige Informationen
Warnung!
Wenn Sie Ihren TomTom GO ausschalten, schaltet sich das GSM-Modul nicht sofort ab.
Nachdem Sie Ihren TomTom GO ausgeschaltet haben, bleibt das GSM-
Modul noch so lange wie nachfolgend angegeben eingeschaltet:
• 15 Minuten - wenn Sie Ihren
TomTom GO von der
Frontscheibenhalterung abnehmen.
• 2 Stunden - wenn Sie Ihren
TomTom GO in der Halterung eingesetzt lassen.
Ein GSM-Modul kann durch Funkwellen
Störungen bei elektrischen Geräten wie
Herzschrittmachern, Hörgeräten und
Flugzeuginstrumenten verursachen.
Die so hervorgerufenen
Funktionsstörungen können die
Gesundheit und das Leben Anderer gefährden.
Verwenden Sie Ihren TomTom GO daher niemals in der Nähe ungeschützter elektrischer Anlagen oder in Bereichen, in denen der Gebrauch von Mobiltelefonen verboten ist, zum Beispiel in
Krankenhäusern oder Flugzeugen.
GPRS-Netzversorgung
Wenn Sie sich an einem Ort ohne GPRS-
Netzversorgung befinden, werden alle an Sie und von Ihnen gesendeten Nachrichten gespeichert. Alle gespeicherten Nachrichten werden gesendet, sobald wieder eine GPRS-
Verbindung besteht.
Wichtig ationen
Um die GPRS-Netzversorgung zu überprüfen, tippen Sie in der Fahransicht auf das GPRS-
Verbindungssymbol.
Die SIM-Karte
Bitte beachten Sie, dass die Entfernung Ihrer
SIM-Karte aus Ihrem TomTom GO zu einem
Datenverlust führen kann. Aus diesem Grund empfehlen wir Ihnen, die SIM-Karte nicht aus
Ihrem GO herauszunehmen. TomTom
übernimmt keine Haftung für Datenverluste, die aufgrund der Entfernung der SIM-Karte aus Ihrem TomTom GO entstehen.
Kilometerzähler und Positionsortung
Ihr TomTom GO verfügt über einen
Kilometerzähler zum Aufzeichnen der von
Ihnen zurückgelegten Fahrtstrecke. Er funktioniert nur, wenn Ihr TomTom GO in die
Halterung eingesetzt ist. Die Position Ihres
Fahrzeugs kann ebenfalls nur an TomTom
WEBFLEET gesendet werden, wenn Ihr GO in die Halterung eingesetzt ist.
35
DE
Murcia.book Page 36 Monday, December 11, 2006 9:22 AM
DE
Bevor Sie beginnen…
Bev begi n…
Jeder mag den TomTom GO
Lassen Sie Ihren GO also niemals im Auto liegen, wenn Sie ihn nicht benutzen – er könnte sonst zu einer leichten Beute für
Langfinger werden!
Nehmen Sie Ihren GO, die
Windschutzscheibenhalterung und das
Autoladegerät immer mit; lassen Sie keine
TomTom-Produkte sichtbar im Auto liegen.
Legen Sie Ihren GO immer in die Tragetasche, um den Touchscreen zu schützen.
Erstellen Sie eine Sicherungskopie von Ihrem
TomTom GO
Es empfiehlt sich immer, eine
Sicherungskopie des Inhalts Ihres
TomTom GO anzulegen. Eine
Sicherungskopie können Sie über TomTom
HOME anlegen.
Passen Sie gut auf Ihren TomTom GO auf
Es ist wichtig, dass Sie sich um Ihren GO kümmern und ihn richtig reinigen.
• Verwenden Sie ein weiches Tuch, um das
Display Ihres GO abzuwischen; verwenden
Sie keine flüssigen Reinigungsmittel.
• Falls Ihr GO feucht geworden ist, trocknen
Sie ihn mit einem weichen Tuch ab.
• Öffnen Sie das Gehäuse Ihres GO unter keinen Umständen. Dies kann gefährlich sein und führt zum Erlöschen Ihrer
Gewährleistung.
• Verwenden Sie die Speicherkarte (SD-
Karte) nur in TomTom-Geräten. Diese können die Speicherkarte beschädigen.
• Setzen Sie Ihren GO keinen hohen oder tiefen Temperaturen aus, da diese zu einer permanenten Beschädigung führen können. Lassen Sie ihn zum Beispiel an heißen Sommertagen oder in kalten
Winternächten nicht im Auto liegen.
36
Murcia.book Page 37 Monday, December 11, 2006 9:22 AM
Erste Schritte
Erste e
Einschalten
Befolgen Sie die Anweisungen auf dem
Installation Poster, um Ihren TomTom GO in
Ihrem Auto anzudocken.
Wenn Sie Ihren TomTom GO zum ersten Mal einschalten, kann der Start bis zu 20 Sekunden dauern. Um Ihren TomTom GO auszuschalten, halten Sie die Einschalttaste 2
Sekunden lang gedrückt.
Einrichten
Um Ihren TomTom GO einzurichten, müssen
Sie einige wenige Fragen beantworten.
Beantworten Sie die Fragen durch Antippen des Displays. Sie verwenden den
Touchscreen für alle Eingaben an Ihrem GO.
Wenn Sie alle Fragen beantwortet haben, zeigt
Ihr GO die Fahransicht an. Die Fahransicht wird in Schwarzweiß dargestellt, bis Ihr GO
Ihre aktuelle Position ermittelt hat.
Weitere Informationen über die Fahransicht finden Sie unter Fahransicht auf Seite 38.
Ermitteln Ihrer aktuellen Position
Ihr TomTom GO kann Ihre aktuelle Position nur im Freien bestimmen. Wenn Sie Ihren GO zum ersten Mal starten, kann dies bis zu 5
Minuten dauern. Dauert dieser Vorgang länger als 5 Minuten, vergewissern Sie sich, dass Sie sich in offenem Gelände befinden, in dem keine hohen Gebäude oder Bäume den
Empfang erschweren.
Später wird Ihre Position viel schneller ermittelt werden, normalerweise innerhalb weniger Sekunden.
Sobald Ihr GO Ihre aktuelle Position bestimmt hat, wird Ihre Position auf der Karte in Farbe, aus der Sicht des Fahrers dargestellt.
Hinweis : Bei einigen Fahrzeugen ist eine wärmereflektierende Schicht in die
Windschutzscheibe integriert, die eventuell verhindert, dass TomTom GO Ihre aktuelle
Position ermitteln kann. Sollte dies bei Ihrem
Fahrzeug der Fall sein, verwenden Sie das
TomTom External Antenna Kit (als Zubehör erhältlich).
DE
37
DE
Murcia.book Page 38 Monday, December 11, 2006 9:22 AM
Fahransicht
A Schaltflächen zum Vergrößern und
Verkleinern der Karte um Ihre Position herum.
B
Schaltfläche, die beim Eingang einer neuen
Nachricht oder eines neuen Auftrags angezeigt wird. Tippen Sie auf den
Umschlag, um die Nachricht oder den
Auftrag zu öffnen.
C Ihre aktuelle Position.
D
Den Namen der nächsten
Hauptverkehrsstraße (falls zutreffend).
E
Schaltfläche, die den Status eines Auftrags anzeigt oder ob Sie sich gerade auf einer
Geschäftsfahrt oder auf einer Privatfahrt befinden. Tippen Sie auf die Schaltfläche, um den Status zu ändern. Einige der
Schaltflächen werden nachfolgend erklärt.
F
Die nächste Anweisung
Dieser Bereich zeigt Ihnen, was wann zu tun ist.
Tippen Sie auf diesen Bereich, um die letzte gesprochene Anweisung zu wiederholen und um die Lautstärke zu verändern.
G
Der Name der nächsten Straße, in die Sie abbiegen müssen
H
Informationen über Ihre Reise.
I Symbol für die GPRS-Verbindung
Zeigt an, ob Ihr TomTom GO eine GPRS-
Verbindung hat. Tippen Sie auf das
Symbol, wenn Sie Informationen zur
GPRS-Netzversorgung erhalten möchten.
J
Anzeige für die GPS-Signalstärke
38
Murcia.book Page 39 Monday, December 11, 2006 9:22 AM
Die nachfolgenden Schaltflächen können alle auf der linken Seite der Fahransicht angezeigt werden. Tippen Sie auf eine dieser
Schaltflächen, um die zugehörigen Details anzuzeigen oder um die Einstellungen zu
ändern.
Neuer Auftrag oder neue
Nachricht
... zeigt an, dass neue, ungelesene Aufträge oder
Nachrichten vorliegen.
Auftragsstatus
... zeigt während einer
Geschäftsfahrt bzw. während
Ihrer Arbeitszeit den Status des aktuellen Auftrags an.
Jedem Status ist ein anderes
Symbol zugeordnet.
Privatfahrt
... zeigt an, dass Sie sich auf einer Privatfahrt befinden.
Dieses Symbol wird nur angezeigt, wenn
‚Fahrtenbuchmodus ändern‘ aktiviert ist.
Pause
... zeigt an, dass Sie sich in der Pause befinden. Dieses
Symbol wird nur angezeigt, wenn die Option 'Arbeitszeit erfassen' auf Ihrem
TomTom GO aktiviert wurde.
39
Fahransicht
Feierabend
... zeigt an, dass Ihre
Arbeitszeit beendet ist.
Standortbestimmung deaktiviert
... zeigt an, dass die
Standortbestimmung Ihres
Fahrzeugs deaktiviert ist, wenn Sie sich auf
Privatfahrten, in der Pause oder im Feierabend befinden
(nur, wenn durch die Zentrale aktiviert).
DE
DE
Murcia.book Page 40 Monday, December 11, 2006 9:22 AM
Menüs
Menüs Hauptmenü
Wenn Ihr TomTom GO die FahransichtO anzeigt, können Sie das Display jederzeit antippen, um das Hauptmenü aufzurufen.
• Navigieren zu...
Tippen Sie auf diese Schaltfläche, um mit der Planung einer Route zu beginnen.
• Alternative suchen...
Tippen Sie auf diese Schaltfläche, wenn Sie einen Abschnitt Ihrer Route vermeiden,
über einen bestimmten Ort reisen oder eine alternative Route berechnen möchten.
• Aufträge anzeigen
Tippen Sie auf diese Schaltfläche, um die
Nachrichten und Aufträge, die Ihnen von
Ihrer Zentrale gesendet wurden, zu lesen und abzuarbeiten.
• Zur Zentrale senden
Tippen Sie auf diese Schaltfläche, um
Nachrichten an Ihre Zentrale zu senden.
• Einstellungen ändern
Mit diese Schaltfläche wird das Menü
'Einstellungen' geöffnet. Sie können das
Aussehen und die Funktionsweise Ihres
TomTom GO weitgehend an Ihre persönlichen Bedürfnisse anpassen.
40
Murcia.book Page 41 Monday, December 11, 2006 9:22 AM
Aufträge und Meldungen
Die Zentrale kann Dienstleistungs-, Liefer- und
Abholaufträge senden. Diese werden auf
Aufträg gen
Ihrem TomTom GO gespeichert, sodass Sie diese jederzeit lesen und abarbeiten können.
Die drei Auftragsarten sind unterschiedlich gekennzeichnet. Sie finden sie unter Aufträge anzeigen .
Diese Symbole zeigen den Typ und Status der
Elemente an, die in Ihrer Liste der Aufträge und Meldungen enthalten sind:
Neue Textnachricht Unterbrochener
Dienstleistungsauftrag
Gelesene Textnachricht Ausgeführter
Dienstleistungsauftrag
Neuer Dienstleistungsauftrag
Dienstleistungsauftrag in
Ausführung
Abgebrochener oder abgelehnter
Dienstleistungsauftrag
Neuer Liefer- oder
Abholauftrag (vergleichen Sie dieses Symbol mit dem
Symbol für
Dienstleistungsaufträge)
DE
41
Descargar
Enlace público actualizado
Se ha actualizado el enlace público a tu chat. Puedes ver y gestionar tus enlaces de chat después del registro aquí.
Enlace público del documento
Anuncio
