TomTom PRO User Manual

W hat’s
in
the
box
• To m To m PRO
• Easy Click m ount
• U SB cable
• U SB car charger
• Installation poster
2
Read
m e first
Use the EasyClick m ount to install your To m To m PRO inside your car.
Make sure that both the EasyClick m ount and your windscreen are clean and dry before
you attach the m ount. Place the EasyClick m ount so that it does not interfere with your
vie w of the road or of any of the controls in your car.
To attach the EasyClick m ount, press the suction cup firmly against the windscreen on an
area w here the glass is flat. Then twist the rubber grip near the base of the m ount in a
clockwise direction until you hear a click.
Plug the cable into your car dashboard and connect the other end to the botto m of your
device.
To switch on your navigation device, press and hold the O n/Off button until you see the
start-up screen. The first tim e you switch on your device, it may take a short tim e to start.
: Take care to select the correct language, since the language you choose will
be used for all text on the screen.
W hen you first switch on your device, you have to answ er a fe w questions to set up the
device. A nsw er the questions by tapping the screen.
W hen you first start your To m To m PRO navigation device, the device may need a fe w
minutes to determine your GPS position and sho w your current position on the map. In
future, your position will be found much faster, usually within a fe w seconds.
To ensure good GPS reception, you should use your device outdoors. Large objects such
as tall buildings can so m etim es interfere with reception.
W hen your navigation device is used in co m bination with a LINK, the GPS receiver in the
LINK is used by default.
M yTo m To m helps you manage the contents, maps and services of your To m To m PRO
navigation device, as w ell as giving you access to the To m To m co m munity. It is a good
idea to frequently connect your navigation device to M yTo m To m, to ensure you always
have the latest updates. You can also log in to M yTo m To m on the To m To m w ebsite.
3
: W e reco m m end using a broadband internet connection w henever you connect your
navigation device to M yTo m To m.
1
2
To set up M yTo m To m, do the follo wing:
1. Connect your co m puter to the internet.
2. Start a bro wser and go to
.
3. Click
Your bro wser do w nloads the M yTo m To m support application, w hich you need to
install on your co m puter in order to connect your device to M yTo m To m. Follo w the
instructions on the screen if you are asked questions w hile do w nloading.
4. W hen pro m pted, connect the m ount for your device to your co m puter using the
supplied cable. Then place your device in the m ount and switch your device on.
: You should plug the USB connector directly into a USB port on your co m puter
and not into a USB hub or USB port on a keyboard or m onitor.
O nce the M yTo m To m support application is installed, you can access M yTo m To m fro m
the notification area on your desktop.
W hen you connect your navigation device to your co m puter, M yTo m To m tells you if
there are any updates for your device.
In rare cases, your To m To m PRO navigation device may not start correctly or may stop
responding to your taps.
First, check that the battery is properly charged. To charge the battery, connect your
device to the car charger. It can take up to 2 hours to fully charge the battery.
If this does not solve the proble m, you can reset the device. To do this, press and hold the
O n/Off button for 15 seconds and release the button w hen your device begins to restart.
The battery in your To m To m PRO navigation device charges w hen you connect it to the
car charger or to your co m puter.
4
The light on the O n/Off button is orange w hile the battery is charging and is green w hen
the battery is fully charged.
: You should plug the USB connector directly into a USB port on your co m puter
and not into a USB hub or USB port on a keyboard or m onitor.
The follo wing information applies only to To m To m PRO 9xxx devices.
So m e To m To m navigation devices contain a G S M/GPRS m odule w hich can interfere with
electrical devices such as cardiac pace makers, hearing aids and aviation equip m ent.
Interference with these devices may endanger the health or life of you or others.
If your device includes a G S M/GPRS m odule, do not use it near unprotected electrical
units or in areas w here the use of m obile telephones is prohibited, such as hospitals and
airplanes.
N ever leave your To m To m PRO or accessories on vie w w hen you leave the car as they
may beco m e an easy target for thieves.
It is im portant to take care of your device :
• Your device is not designed for use in extre m e te m peratures and any such exposure
may cause permanent damage. Extended exposure to sun light may lead to early
deterioration in battery performance.
• D o not open the casing of your device under any circu mstances. Doing so may be
dangerous and will invalidate the w arranty.
• Wipe or dry the screen of your device using a soft cloth. Do not use any liquid cleaners.
5
Safety
Consider carefully w here to attach the m ount in your car. The m ount should not block or
interfere with any of the follo wing :
• Your vie w of the road
• A ny of the controls in your car
• A ny of your mirrors
• The airbag
W hen your navigation device is in the m ount, you should be able to reach the device easily
without leaning or stretching. You can attach the m ount to the windscreen, side windo w
or use a Dashboard M ount Disk to attach the m ount to your dashboard. The follo wing
diagra ms sho w w here you can safely attach the m ount.
To m To m also offers alternative m ounting solutions for your To m To m navigation device.
For m ore information about Dashboard M ount Disks and alternative m ounting solutions,
go to
.
Make sure that both the m ount and your windo w are clean and dry.
1. Press the suction cup firmly against the windo w on an area w here the glass is flat.
2. T wist the locking w heel in a clockwise direction as far as it goes.
The m ount is no w installed and you can place your device on the m ount.
W e reco m m end using the safety settings to make your driving as safe as
possible.
These are so m e of the options included in the safety settings:
• Sho w essential m enu buttons while driving
• Sho w safety re minders
• W arn w hen driving faster than allo w ed
You can also drive m ore safely by using voice co m mands to control your To m To m PRO.
6
Connecting to
LIN K
and
W EBFLE ET
The following information applies when you want to connect your TomTom PRO 7xxx to
a TomTom LINK. To connect your TomTom PRO 9xxx to WEBFLEET, read Connecting to
WEBFLEET (9).
Connect your To m To m PRO device to your To m To m LINK to fully enjoy the benefits of
Connected Navigation.
W hen you first switch on your PRO device, you are asked to connect it with the LINK
installed in your vehicle. You can do this im m ediately or at a later tim e.
1. M ake sure that the LINK is connected to po w er and has a GPRS connection (see
To m To m LINK Installation G uide).
2. S witch on your PRO device.
3. Tap the screen to bring up the Main M enu.
4. Tap
.
You are asked to start the activation process. After you have started the activation
process your PRO device searches for Bluetooth devices.
If your PRO device finds m ore than one Bluetooth device, it sho ws a list of the available
devices. Continue with step 5.
If your PRO device finds only one LINK, continue with step 6.
5. Select your LINK fro m the list.
The nam e starts with LINK follo w ed by the serial nu m ber of your LINK or the licence
plate nu m ber of your vehicle. You can find the serial nu m ber on the outside of your
LINK.
6. Enter the activation code, found in your W EBFLEET contract confirmation.
7. Enter the licence plate nu m ber of the vehicle.
7
If you have properly connected the tw o devices, you receive a w elco m e m essage fro m
W EBFLEET confirming the activation. In future the connection is established
auto matically.
To check the connection status betw een the tw o devices, tap
on your navigation device, then tap
(see
8
in the
m enu
(64)).
Connecting to
W EBFLE ET
The following information applies when you want to connect your TomTom PRO 9xxx to
WEBFLEET. To connect your TomTom PRO 7xxx to a LINK, read Connecting to LINK and
WEBFLEET (7).
A ctivate your PRO to fully enjoy the benefits of Connected Navigation.
W hen you first switch on your PRO device, you are asked to activate it. You can do this
im m ediately or at a later tim e.
1. S witch on your PRO device.
2. Tap the screen to bring up the Main M enu.
3. Tap
.
You are asked to start the activation process.
4. Enter the A ctivation Code, found in your W EBFLEET contract confirmation.
If your PRO device finds m ore than one subsciption to w hich it can be assigned, it
sho ws a list of the available subscriptions. Continue with step 5.
If your PRO device finds only one subscription, continue with step 6.
5. Select your subscription fro m the list.
6. Enter a nam e for your device.
Your device is labelled in the To m To m W EBFLEET service with this nam e.
7. Enter the licence plate nu m ber of the vehicle.
If you have successfully activated your PRO device, you receive a w elco m e m essage fro m
W EBFLEET confirming the activation. In future the connection is established
auto matically.
To check the connection status betw een the PRO and W EBFLEET, tap
m enu on your navigation device, then tap
(see
(64)).
9
in the
10
Planning a
route
: In the interest of safety and to reduce distractions w hile you are driving, you
should always plan a route before you start driving.
To plan a route on your To m To m PRO, do the follo wing :
1. Tap the screen to open the Main m enu.
2. Tap
3. Tap
.
: The first tim e you plan a route, you are asked to select a country, state or region. Your
selection is saved and used for all future routes until you change this setting.
You can change this setting by tapping the flag before you select a city.
4. Enter the to w n or city nam e.
: Instead of typing the address, tap the microphone button to enter the address by
speaking to your PRO.
• To w ns with similar nam es are sho w n in the list w hile you type.
• W hen the correct city or to w n appears in the list, tap the nam e to select the
destination.
11
5. Enter the streetnam e.
• Streets with similar nam es are sho w n in the list w hile you type.
• W hen the correct streetnam e appears in the list, tap the nam e to select the
destination.
6. Enter the house nu m ber, then tap
.
7. The location is sho wn on the map. Tap
address.
to continue or tap
: If you w ant your final destination to be a car park, tap
location fro m the list of car parks close to your general destination.
12
to enter another
and select a
8. Select the type of route you w ant to plan.
9. W hen the ne w route is sho w n, tap
.
• For m ore information about the route, tap
• To plan a different route, tap
.
.
Your To m To m PRO starts to guide you to your destination, using spoken instructions
and onscreen directions.
The route su m mary sho ws an overvie w of your route, the re maining distance to your
destination and the re maining estimated journey tim e.
To vie w the route su m mary, tap the right-hand panel on the status bar in the Driving vie w
or tap
in the Main m enu and then tap
.
W hen used with To m To m Traffic, the route su m mary sho ws an overvie w of your route,
the re maining distance to your destination, the re maining estimated journey tim e and
traffic information about delays on your route.
LIVE su m mary sho ws LIVE services information on your route.
13
To vie w LIVE su m mary information, tap the LIVE tab on the route su m mary screen. Tap
any of the panels for m ore detailed information.
The LIVE tab panels sho w the follo wing information:
•
- tap this panel to vie w detailed information about traffic delays and
other incidents on your route.
•
- tap this panel to open the Speed Cam era m enu. You can then report
a speed cam era or change your settings for speed cam era warnings.
•
- tap this panel to vie w the latest w eather reports.
Note: LIVE services are only available in designated countries. In order to benefit from
LIVE services, the respective WEBFLEET subscription is needed. For more information on
available services in your country, go to business.tomtom.com/liveservices.
Instead of tapping the screen to plan a route, you can use your voice to plan a route.
For information about planning a route using your voice, see Voice command and control.
If you often make trips to the sam e destinations, you can set your To m To m PRO to ask if
you w ant to plan a route to one of these locations, every tim e the device starts. This is
faster than planning a route in the normal w ay.
To select a ne w destination, tap
in the Settings m enu and select
. Then select a button to use for this destination and answ er the questions
about the destination.
You can set your To m To m PRO to ask if you w ant to plan a route to one of your frequently
visited destinations every tim e the device starts.
To change this setting, do the follo wing :
14
1. Tap
2. Tap
in the Settings m enu and then select
, then tap
.
again to begin entering information about the destination.
3. Select a sy m bol for the destination and tap
to set the sy m bol, then tap
.
: To add ne w destinations, select one of the nu m bered sy m bols and enter a nam e for
the ne w destination button.
4. Tap
and if required enter a ne w nam e, then tap
.
5. Enter the address details in the sam e w ay you enter an address w hen planning a route,
then tap
.
6. If you w ant to set m ore destinations, repeat the steps above. Otherwise, tap
.
You are asked if you w ant to change the start-up image.
7. If you w ant to change the image, tap
screen. Otherwise, tap
.
then follo w the instructions sho w n on the
Every tim e your To m To m PRO starts, you are asked if you w ant to plan a route. If you tap
, you are sho w n the Main M enu.
W hen you plan a route, your To m To m PRO asks you if you need to arrive at a particular
tim e.
Tap
to enter a preferred arrival tim e.
Your PRO calculates your arrival tim e and sho ws you w hether you will arrive on tim e.
You can also use this information to w ork out w hen you need to leave. If your PRO sho ws
that you will arrive 30 minutes early, you can w ait and leave in 30 minutes tim e, rather than
arrive early.
Your arrival tim e is constantly recalculated during your journey. The status bar sho ws
w hether you will arrive on tim e or if you are going to be late, as sho w n belo w :
You will arrive 55 minutes before the arrival tim e you entered.
If the estimated arrival tim e is m ore than five minutes before the tim e
you entered, it is sho w n in green.
You will arrive 3 minutes before the arrival tim e you entered.
If the estimated arrival tim e is less than 5 minutes before the tim e
you entered, it is sho w n in yello w.
You will arrive 19 minutes late.
If the estimated arrival tim e is later than the tim e you entered, it is
sho w n in red.
Tap
in the Settings m enu, to enable or disable
arrival tim e notifications.
To enable arrival tim e notifications, select
15
.
W hen you tap
, you can set your destination in many w ays, not just by
entering the address. The other options are listed belo w :
Tap this button to use To m To m Local Search withTo m To m Places to
help you find shops and businesses in and around your current location.
You can choose to search for shops and businesses near you, near
your destination, near any other destination or in a city.
For exam ple, if you are looking for a swim ming pool near your
current location, enter ’swim ming pool’ and choose the best search
result.
Tap this button to navigate to your Ho m e location.
You will probably use this button m ore than any other.
Tap this button to select a Favourite as your destination.
Tap this button to enter an address as your destination.
Tap this button to select your destination fro m a list of places you
have recently used as destinations.
Tap this button to navigate to a Point of Interest (POI).
Tap this button to select a point on the map as your destination using
the map bro wser.
Tap this button to enter a destination using latitude and longitude
values.
Tap this button to select your last recorded position, as your
destination.
16
You can use your To m To m PRO to plan a route in advance, selecting your starting point
and your destination.
Here are so m e m ore reasons to plan a route in advance :
• Find out ho w long a journey is going to take before you start.
You can also co m pare journey tim es for the sa m e route at different tim es of the day or
on different days of the w eek. Your PRO uses IQ Routes w hen planning a route. IQ
Routes calculates routes based on the real average speeds m easured on roads.
• Study the route of a journey you are planning.
• Check a route for so m eone w ho is co ming to visit you and then explain the route to
the m in detail.
To plan a route in advance, follo w these steps:
1. Tap the screen to bring up the Main m enu.
2. Tap the arro w button to m ove to the next m enu screen and tap
.
This button is sho w n w hile there is no planned route on your PRO.
3. Select the starting point for your journey in the sam e w ay that you w ould select your
destination.
4. Set the destination for your journey.
5. Choose the type of route that should be planned.
•
•
•
•
•
•
- the route w hich takes the least tim e.
- the m ost fuel-efficient route for your journey.
- the shortest distance betw een the locations you set. This may not
be the quickest route, especially if the shortest route is through a to w n or city.
- a route w hich avoids m otorw ays.
- a route designed for making the journey on foot.
- a route designed for making the journey on a bicycle.
6. Choose the date and tim e that you will make the journey you are planning.
Your PRO uses IQ Routes to w ork out the best possible route at that tim e. This is useful
to see ho w long a journey takes at different tim es of the day or on different days of the
w eek.
7. Your To m To m PRO plans the route betw een the tw o locations you selected.
You can access these options for the route you last planned by tapping
Main M enu or the
button on the route sum mary screen.
You can access these options for the route you last planned by tapping the
on the route su m mary screen.
17
in the
button
You can then select fro m the follo wing options:
Tap this button for a list of all the turn instructions on the route.
This is very useful if you need to explain a route to so m eone else.
Tap this button to see an overvie w of the route using the map
bro wser.
Tap this button to w atch a de m o of the journey. You can interrupt the
de m o at any tim e by tapping the screen.
Tap this button to open the route su m mary screen.
Tap this button to see a previe w of your destination.
You can navigate to a car park near your destination, call your
destination if a phone nu m ber is kno w n, and vie w any available
information about your destination.
Tap this button to see all the traffic incidents on your route.
Note: This button is only shown if your device has either an HD
Traffic subscription or an RDS-TMC Receiver connected. Traffic
information is not available in all countries or regions. For more
information about TomTom traffic information services, go to
tomtom.com/services.
18
Voice
control
Instead of tapping the screen to control your To m To m PRO, you can use your voice to
control your PRO.
For exam ple, to increase the volu m e on your PRO, you can say, "Increase volu m e."
To vie w the list of available co m mands, tap
then tap
and then tap
in the Main m enu or the Settings m enu
: Voice control requires a co m puter voice. W hen there are no co m puter voices
installed on your To m To m PRO , this feature is not available.
To select a co m puter voice, tap
select a co m puter voice.
in the Settings m enu, then tap
and
To enable voice control and sho w the button in the Driving vie w, tap
in the Settings m enu and select the checkbox for
.
To switch off voice control and re m ove the button fro m the Driving vie w, tap
in the Settings m enu and clear the checkbox for
.
The follo wing exam ple sho ws ho w to use voice control to plan a journey to your Ho m e
address.
1. Tap the microphone button in the Driving vie w to turn on the
microphone.
The microphone m onitor is sho w n on the right-hand side of the screen.
2. W hen you hear the tone, say, "Navigate to Ho m e".
W hile you are speaking the microphone m onitor sho ws ho w w ell the device can hear
your voice :
A green bar m eans the device can hear your voice.
A red bar m eans your voice is too loud for the device to recognise individual w ords
and understand everything you say.
A grey bar m eans your voice is too quiet for the device to recognise individual
w ords and understand everything you say.
For so m e phrases, your PRO repeats w hat you say and asks for confirmation.
3. If the co m mand is correct, say, "Yes."
19
If the co m mand is incorrect, say, "N o" and repeat the co m mand after you hear the tone.
Your PRO plans a route fro m your current location to your Ho m e address.
: To stop your PRO fro m listening out for further co m mands, say "Back" or "Cancel" or
"Q uit" or sim ply tap the screen.
: In the interest of safety and to reduce distractions w hile you are driving, you
should always plan a route before you start driving.
Note: It’s not possible to plan a route using your voice for all maps in all countries, or in
all languages.
To plan a route to an address using speech, do the follo wing :
1. Tap the voice control button in the Driving vie w.
2. W hen you hear the tone, say, "Navigate to address".
3. Say the nam e of the to w n.
Your PRO sho ws a list of to w ns w hich sound similar to w hat you said and
tells you w hich to w n is at the top of the list.
If the to w n you hear is the sa m e as the to w n you requested then say, "Done" or "O K" or
"Yes" or "O ne" or tap the to w n at the top of the list.
If the to w n you hear is incorrect, but the correct to w n is in the list, say the nu m ber next
to the correct to w n or tap the nam e of the to w n.
For exam ple, if the correct city is Paris and this to w n is sho w n at the third ite m in the
list, you can say, "Three" or tap the nam e,
.
If the na m e is not in the list, then say "Back" or "N o" or tap
screen and say the to w n again w hen you hear the tone.
to return to the previous
4. Say the streetnam e.
Your PRO sho ws a list of streetnam es w hich sound similar to w hat you said and tells
you w hich streetnam e is at the top of the list.
If the streetnam e you hear is the sam e as the streetnam e you requested then say,
"Done" or "O K" or "Yes" or "O ne" or tap the streetnam e at the top of the list.
20
: Different locations may have the sam e nam e, such as a road that spans multiple
postcodes. W hen this happens you need to look at the screen and tap the correct location.
If the street nam e you hear is incorrect, but the correct streetnam e is in the list, say the
nu m ber next to the correct streetnam e or tap the streetnam e in the list.
If the streetnam e is not sho w n in the list, say "Back" or "N o" or tap
to return to the
previous screen and then say the streetnam e again w hen you hear the tone.
5. Say the house nu m ber.
: Nu m bers need to been spoken in the sam e language as the button nam es and
m enus on your To m To m PRO.
Nu m bers should be pronounced in the sam e w ay you normally say a nu m ber, in one
continuous sentence. So 357 is pronounced, "Three hundred and fifty seven."
If the nu m ber is sho w n correctly then say, "Done" or "O K" or tap the keyboard to enter
the nu m ber.
If the nu m ber is sho w n incorrectly then say, "Back" or "N o" or tap the Backspace key and
repeat the nu m ber.
: If you say, "Back" w hen there are no nu m bers on the screen, your PRO will return you
to the previous screen.
W hen the nu m ber is sho w n correctly say, "Done" or "O K." Alternatively, enter the
nu m ber by tapping the screen.
6. W hen the route has been calculated and the route sum mary is sho w n, tap
.
Your To m To m PRO starts to guide you to your destination, using spoken instructions
and onscreen directions.
: In the interest of safety and to reduce distractions w hile you are driving, you
should always plan a route before you start driving.
Even if you don’t use voice control to start planning a journey, you can still use your voice
to enter the address.
To start planning a journey tap
in the M ain m enu, then tap
21
.
To enter the destination using your voice, tap one of the follo wing buttons:
Tap this button to enter an address entirely using speech.
helps you to enter information without tapping the
screen.
This option recognises the follo wing spoken terms:
• Co m mands: Yes, N o, Back, Done, O K, Crossing.
• Streetnam es.
• Cities and to w ns and their centres.
• Favourites, postcodes and POIs.
• Plan alternative route, Recalculate original, A void roadblock,
Minimise delays, Clear route, Travel via... and Recent destination.
• Nu m bers. These should be pronounced in the sa m e w ay you
normally say a nu m ber, in one continuous sentence. So 357 is
pronounced, "Three hundred and fifty seven."
Tap this button at the base of the keyboard to use speech to enter an
address. W hen the button is grey, you cannot use speech to enter an
address.
This button is available for the for the follo wing types of destination:
•
- to select a city or to w n centre.
•
•
- to select an address.
- to select the point w here tw o streets
m eet.
:
• Your PRO recognises places and streetna m es when they are spoken in the local
language using local pronunciation.
• Spoken address entry is not possible for postcodes w hich must be entered using the
keyboard.
• Spoken address entry is not available for all maps in all countries.
22
Driving
Vie
w
W hen your To m To m PRO device starts for the first tim e, you are sho w n the Driving Vie w
along with detailed information about your current position.
Tap the centre of the screen at any tim e to open the Main M enu.
You can choose the screen sho w n w hen you switch on your device by tapping
in the Main M enu, then tapping
.
W hen your To m To m PRO starts, you are sho w n the Driving Vie w along with detailed
information about your current location.
Tap the centre of the screen at any tim e to open the Main M enu.
1. Zoo m button - tap the magnifying glass to sho w buttons for zoo ming in and out.
2. Q uick m enu containing W ORK status icons - switch this on and off in the Settings m enu.
W hen your navigation device and W EBFLEET are first activated, the quick m enu
contains the buttons
and
or
.
3. W ORK status icons. These icons give you fast access to order and reporting
information. Here are so m e of the status icons:
- the current status of order w hen you are on a business trip or
in w ork tim e. Each status has a different icon. Click the icon to see the order.
- indicates that you have started w ork.This icon is only sho w n if
is active.
- indicates that you selected that you are taking a break. This icon is only
sho w n if
is active.
- indicates that you have finished w ork.
23
- indicates that you selected that you are on a private trip. This icon
is only sho w n w hen
is active.
- if locating is disabled, the position of your vehicle is not
tracked by To m To m W EBFLEET. Locating can be disabled w hen you are on private
trips, taking a break or have finished w ork. W hen locating is disabled, the status icon is
sho w n but is greyed out.
4. N e w inco ming m essages or orders. Tap this icon to sho w the latest unread m essage or
order.
5. Your current position.
6. The nam e of the next major road or road sign information, if applicable.
7. Traffic sidebar.
8. Connection indicator - sho ws that your navigation device has a connection to
W EBFLEET. W hen the connection is lost, a cross is sho w n.
9. The tim e, your current speed and the speed limit, if kno w n. To see the difference
betw een your preferred arrival tim e and your estimated arrival tim e, check the
checkbox in Status bar settings.
Tap this part of the status bar to switch betw een a 3D map and a 2D map.
10.The nam e of the street you are on.
11.Navigation instruction for the road ahead and the distance to next instruction. If the
second instruction is less than 150m after the first instruction, you see it sho w n
im m ediately instead of the distance.
Tap this part of the status bar to repeat the last voice instruction and to change the
volu m e. You can also tap here to mute the sound.
12.The re maining journey tim e, the re maining distance and your estimated arrival tim e.
Tap this part of the status bar to open the Route Su m mary screen.
To change the information sho w n, tap
in the
m enu.
Your To m To m PRO helps you im prove your driving behaviour. The Driving Vie w sho ws
real-tim e alerts to re mind you to drive in a safer and m ore fuel-efficient w ay.
1. The follo wing alerts are sho w n.*
- you are driving in a dangerous w ay, for exam ple, you are
cornering too fast or breaking too hard.
- the vehicle has been standing still with the engine running for longer than
five minues. The am ount of w asted fuel is sho w n w hen it is greater than 0,1l.
2.Fuel efficiency indicators.
24
- this icon is sho w n w hen you are using at least 10% less fuel
than the average value for your vehicle.
- this icon is sho w n w hen you are using at least 10% m ore
fuel than the average value for your vehicle.
These icons indicate your fuel efficiency m easured against an average value
w hich is configured by the dispatcher.** These icons are not sho w n, w hen the status
bar is configured to sho w the current fuel consu m ption (3) and the average fuel
consu m ption (4).
3. The current fuel consu m ption rate.**
4. The average fuel consu m ption rate of the current trip.**
Note: The current and the average fuel consumption rates are shown in red or in green in
the same way as the fuel efficiency indicators above.
To see detailed information about the safety and efficiency of your driving style per trip,
per day and overall, see
.
* Installed TomTom LINK required.
** Installed TomTom ecoPLUS and LINK required.
The follo wing sy m bols are sho w n in the Driving Vie w :
M obile phone not connected - this sy m bol is sho w n w hen the
selected m obile phone is not connected to your device. You m ust
have already established a connection to this phone.
Sound m uted - this sy m bol is sho w n w hen the sound has been
m uted.
To turn the sound back on, tap the middle panel in the status bar.
Battery - this sy m bol is sho wn w hen the battery level is lo w.
W hen your see this sy m bol, you should charge your navigation
device as soon as possible.
25
A ctive
driver
fee dback
Your To m To m PRO helps you im prove the safety and efficiency of your driving behaviour.
It also helps you to save m oney and drive in a m ore environ m entally responsible w ay.
W hen the LINK is installed in your vehicle, your PRO can collect information about driving
events such as harsh braking, fast cornering, the tim e your vehicle is idling and fuel
consu m ption*.
W hile you are driving you are inform ed about driving events in the Driving Vie w. Detailed
information about safety and efficiency is sho w n on the ecoStatistics page :
1. Tap the Driving Vie w to bring up the Main M enu.
2. Tap
.
3. Tap
4. Select the tab
.
,
or
.
To reset the values of the active tab to 0 tap
The
.
vie w sho ws you the follo wing details per trip, per day or in total:
• The distance and tim e driven.
• The nu m ber of driving events and their average severity.
• The total fuel consu m ption and ho w it co m pares to a reference value.
• The tim e spent stationary with the engine running for longer than five minutes and the
fuel you have used.
* Information about fuel consumption is only available if your vehicle is installed with an
ecoPLUS. For more information about ecoPLUS go to http://business.tomtom.com/
ecoplus
26
A d- d
vance
Lane
G uidance
Note: Lane guidance is not available for all junctions or in all countries.
Your To m To m PRO helps you prepare for m otorw ay exits and junctions by sho wing the
correct driving lane for your planned route.
As you approach an exit or junction, the lane you need is sho w n on the screen.
There are tw o types of lane guidance :
• Lane images
To turn lane images off, tap
Clear the checkbox for
in the Main M enu, then tap
.
: Tap any w here on the screen to return to the Driving Vie w.
• Instructions in the status bar
27
.
: If no lane guidance is sho w n in the status bar and all lanes are highlighted, you can
use any lane.
28
W enu
O RK
m
To open the W ORK m enu, tap the screen to bring up the main m enu, then tap
•
.
- tap this button to vie w the list of orders.
•
- tap this button to vie w the list of m essages.
•
- tap this button to send text or general status m essages to the office.
•
- tap this button to report w hen you start and finish w ork, and start
and finish breaks. This feature is only available if activated.
•
- tap this button to switch betw een private and business trips.
This feature is only available if activated.
•
•
•
•
•
•
- tap this button to change the driver.
- tap this button to vie w detailed information about the safety and
efficiency of your driving style per trip, per day or in total.
odo m eter.
office.
- tap this button to adjust the odo m eter to match your vehicle’s
- tap this button to vie w the connectioin status betw een you and the
- tap this button to change the vehicle in w hich you are using your PRO.
- tap this button to configure the source for the GPS signal, change the
m essage settings and select w arning sounds.
29
O rders
The office can send service orders, delivery orders and pick up orders. They are stored on
your To m To m PRO.
You can read and deal with the m at any tim e by tapping
To recall the order you are w orking on, tap
icon in the driving vie w.
in the
in the
m enu.
or the order
These sy m bols sho w the type and status of ite ms in your list of orders:
N e w service order
Service order in progress
Suspended service order
Finished service order
Cancelled or rejected
service order
N e w delivery or pick up
orders
Tap the button for a ne w order in the driving vie w to bring up the latest
unread order.
To sho w the co m plete list of your orders, do the follo wing:
1. Tap the screen to bring up the main m enu.
30
2. Tap
.
3. Tap
.
4. Select an order fro m the list. To let the PRO device read aloud the order tap
then tap
.
5. To w ork on this order tap
. To reject the order tap
You can enter a reason for the rejection.
, then tap
,
.
If you have agreed to w ork on the order, you are asked to start the order. If the order
contains destination data, you are asked to start navigation.
As soon as you start the order, you can report your current activity. To open the order you
are currently w orking on, tap the quick m enu button in the driving vie w, then tap
, or tap the order icon in the driving vie w. The order vie w sho ws you the current and
the next step, and an excerpt of the order details.
To report the next activity, tap
To read the co m plete order, including the planned arrival tim e and destination, tap
.
To report to your office by sending a m essage, repeat the previous step or vie w the history
of the current order, tap
.
1. To suspend the current order, select it fro m the list of orders.
2. Tap
3. Tap
.
.
31
1. To switch to another order, select the order fro m the list of orders.
2. You are asked to suspend the current order and to start w orking on the ne w one.
You can continue w orking on the suspended order at any tim e. To do this, select the
suspended order fro m the list and tap
.
1. If you w ant to cancel an order, first select the order fro m the list of orders and m essages.
2. Tap
3. Tap
.
.
You have to enter a reason for cancelling the order.
32
Pre
fineded
routes
over
the air
To learn ho w to w ork with orders in general, see
(30).
In addition to orders with a single destination you can also receive Itinerary orders w hich
include a predefined route with multiple w aypoints on your To m To m PRO device. This
chapter explains ho w to skip w aypoints of an Itinerary order.
After you tap
to start the navigation of an Itinerary order, the Route Su m mary sho ws
you the route on the map. It sho ws the destination, the total travel tim e, the total distance
to travel and the nu m ber of w aypoints on your itinerary.
Tap
to start navigation. There is a w aypoint icon in the Driving Vie w that indicates
the first w aypoint in the list of w aypoints on your Itinerary.
W hen you pass a w aypoint, the w aypoint icon in the Driving Vie w flashes and you hear an
audible notification. To disable these w arnings, see
(36).
After you have passed a w aypoint the nu m ber of the next w aypoint is sho w n in the Driving
Vie w.
Note: The Driving View shows the estimated time of arrival at the final destination and
not at the next waypoint.
33
You can access the list of w aypoints of your itinerary order and skip single w aypoints.
To navigate using a specific w aypoint do the follo wing :
1. Tap the W aypoint icon in the Driving Vie w to sho w the list of w aypoints and the
departure and destination points.
2. Select a w aypoint fro m the list.
3. Confirm you w ant to navigate to the selected w aypoint.
4. Tap
.
The next w aypoint is sho wn with a blue nu m ber on the map.
5. Tap
.
The w aypoints you have passed through or skipped are greyed-out and stay in the list for
reference or later use. You can select greyed-out w aypoints fro m the list as next
destination at any tim e. W hen you select a greyed-out w aypoint, all the w aypoints that
follo w in the list beco m e active again and are included in the itinerary.
If you prefer to select a w aypoint on the map as the next destintation, do the follo wing :
1. Tap the w aypoint icon in the Driving Vie w to sho w the list of w aypoints.
2. Tap
to sho w the route and the w aypoints on the map.
34
3. Tap the map to select a w aypoint.
The location you tapped on the map is flagged.
: This location does not have to be exactly on one of the w aypoints already on your
itinerary.
4. Tap the button in the street nam e balloon.
5. Tap
nearest to the selected location.
to navigate to the w aypoint in the list w hich is
6. Confirm that you want to navigate to the w aypoint sho w n.
7. Tap
to confirm the nearest w aypoint.
The next w aypoint is sho wn with a blue nu m ber on the map.
35
8. Tap
.
Navigation to the selected w aypoint begins.
If you w ant to switch notifications w hen passing waypoints on or off, do the follo wing:
1. Tap the screen to bring up the Main M enu.
2. Tap
.
3. Tap
.
4. Tap
.
5. Select or clear the checkbox for the setting
6. Tap
.
36
.
M essages
The office can send text m essages to you. They are stored on your To m To m PRO. You
can read the m at any tim e by tapping
in the
m enu.
These sy m bols sho w the type and status of ite ms in your m essages list and in your list of
orders:
N e w text m essage
Text m essage that has
been read
Tap the button for ne w m essages in the driving vie w to sho w the latest m essage.
To sho w the co m plete list of your m essages, do the follo wing:
1. Tap the screen to bring up the main m enu.
2. Tap
3. Tap
.
.
4. Select a m essage fro m the list. To let the PRO device read aloud the order tap
then tap
.
5. To reply to this m essage, tap
and then
37
.
,
38
Call
contact
Orders can contain a contact nam e and a telephone nu m ber. You can call this nu m ber
fro m your To m To m PRO.
Note: To use the Call contact feature you need a Bluetooth® mobile phone that is
compatible with your PRO device.
1. Tap the screen to bring up the main m enu.
2. Tap
.
3. Tap
.
4. Select an order fro m the list by tapping it.
5. Tap
6. Tap
.
.
7. Tap the contact to dial the nu m ber.
39
40
Report
to office
To send a text m essage to the office, do the follo wing.
1. Tap
in the
2. Tap
m enu.
.
3. Enter your text (see belo w).
4. To send your co m plete m essage to the office, tap
.
Enter your m essage using the keyboard and the follo wing buttons:
Tap this button to enter
upper-case letters.
Tap this button to switch
to the nu m eric keyboard.
Tap this button to switch
to the special characters
keyboard.
Tap this button to switch
to the u mlauts keyboard.
41
Tap this button to switch
back to the alphabetic
keyboard.
Tap this button to delete
single characters.
Pre-defined m essages m ust be defined by the office. You can also add information to a
predefined m essage.
1. Tap
in the
m enu.
2. Select a pre-defined m essage fro m the list by tapping it.
3. Tap
to send the m essage directly to the office. If you w ant to add information, tap
then send your m essage.
42
Driver
identification
To generate personalised w ork tim e reports, you need to identify yourself by entering
your PIN code.
Note: Using TomTom WEBFLEET, the office can select that you have to enter your PIN
code each time you switch on your TomTom PRO.
1. Tap the screen to bring up the main m enu.
2. Tap
3. Tap
.
.
4. Select your nam e fro m the driver list by tapping it.
5. Enter your four digit PIN code provided by your W EBFLEET ad ministrator, then tap
43
.
Your PIN code is no w stored and used for all reports until you change it.
44
Report
w orking
tim e
You can report the tim e that you start and finish w ork, as w ell as the tim e you spend
having breaks.
To do this, you must first set your driver nam e (see
(43)).
To report the tim es you spend w orking to To m To m W EBFLEET, do the follo wing:
1. Tap the screen to bring up the main m enu.
2. Tap
3. Tap
.
.
4. Tap the appropriate button to change your w ork status.
You can select betw een
,
and
. W hen you tap
, the tim e you started
w orking is indicated. To report the start of a break tap
. To resu m e w ork after a
break, tap
again. To report the end of your w ork tap
.
Note: Either Report work time or Change logbook mode is available. These are activated
by the office using TomTom WEBFLEET.
45
W hen you turn on your To m To m PRO device, you may be asked to report that you are
starting w ork or finishing a break. This happens if the last status you reported before
switching off w as
or
.
W hen you turn off your To m To m PRO device and you have not reported
or
,
your device displays a m enu with the options
,
and
. You can then report
your status to W EBFLEET before turning off.
Note: The feature that asks you to Report work time transactions is activated by the office
using TomTom WEBFLEET.
46
Change
logbook
m ode
You can generate a driver’s logbook with your To m To m PRO. To use this functionality you
need to adjust the odo m eter first. You can do this by tapping
in the logbook. See
(62).
To change the logbook m ode or type of trip, do the follo wing:
1. Tap the screen to bring up the main m enu.
2. Tap
3. Tap
.
.
Note: Either Report work time or Change logbook mode is available. These are activated
by the office using TomTom WEBFLEET.
4. Select the appropriate logbook m ode.
The current logbook m ode is sho w n with a red circle around it, as w ell as journey
specific information.
47
M aking
changes to
your
route
After you plan a route, you may w ant to change the route or even the destination. There
are various w ays to change your route without the need to co m pletely replan the entire
journey.
To change the current route, tap
in the Main m enu:
Tap this button to change the current route.
This button is only sho w n w hile there is a planned route on your
PRO .
To change the current route or your destination, tap one of the follo wing buttons:
Tap this button to find an alternative to the current route.
This button is only sho w n w hile there is a planned route on your
PRO .
This is a sim ple w ay to search for a different route to your current
destination.
Your PRO calculates a ne w route fro m your current location, to reach
your destination using co m pletely different roads.
The ne w route is sho w n next to the original route so that you can
select the route you w ant to use.
Tap this button w hile driving on a planned route, to avoid a
roadblock or traffic congestion on the road ahead.
Your PRO will suggest a ne w route w hich avoids the roads on your
current route for the selected distance.
If the roadblock or traffic congestion suddenly clears, tap
to replan your original route.
: Be a w are that w hen a ne w route is calculated, you might
im m ediately be asked to turn off the current road.
48
Tap this button to avoid traffic delays on a planned route.
It is not always possible to avoid all traffic delays. Your PRO will
check for traffic delays on your route and calculate the best route to
avoid all or m ost of the delays.
Note: This button is only available when Traffic is enabled in the
Services menu. For more information about TomTom traffic
information services, go to tomtom.com/services.
Tap this button to change the current destination.
W hen you change the destination, you are sho w n the sam e options
and asked to enter the ne w address in the sam e w ay as w hen you
plan a ne w route.
Tap this button to avoid part of the current route.
You are sho w n a list of the streetnam es on your route. W hen you tap
one of the streetnam es, your PRO calculates a detour to avoid the
selected street. The route su m mary sho ws both the ne w route and
your original route. Tap the panel on the right to select one of the
routes and then tap
.
If you do not w ant to use either of the routes sho w n in the route
su m mary, tap
to find another w ay to alter your route.
Tap this button to change your route by selecting a location you
w ant to travel past, maybe so you can m eet so m eone on the w ay.
W hen you select a location to travel past, you are sho w n the sam e
options and asked to enter the ne w address in the sam e w ay as
w hen you plan a ne w route.
Your PRO calculates the route to your destination via the selected
location.
The selected location is sho w n on the map using a marker. You can
only select one location to travel past on a route.
Unlike the w arning w hich is given w hen you reach your destination,
no w arning is given w hen you travel past a marked location.
49
Vie
m apw
You can vie w the map in the sa m e w ay as you might look at a traditional paper map. The
map sho ws your current location and many other locations such as Favourites and POIs.
To vie w the map in this w ay, tap
or
in the Main m enu.
You vie w different locations on the map by m oving the map across the screen. To m ove
the map, touch the screen and drag your finger across the screen.
To select a location on the map, tap the location on the map. The cursor highlights the
location and displays useful information about the location in an information panel. Tap
the information panel to create a Favourite or plan a route to that location.
1. The scale bar
2. Traffic - current traffic incidents. Use the O ptions button to select w hether traffic
information is sho w n on the map. W hen traffic information is sho w n on the map, POIs
and Favourites are not sho w n.
Note: LIVE services are only available in designated countries. In order to benefit from
LIVE services, the respective WEBFLEET subscription is needed. For more information on
available services in your country, go to business.tomtom.com/liveservices.
3. Marker
Markers point to your current location (blue), your ho m e location (yello w) and your
destination (red). The marker sho ws the distance to the location.
Tap a marker to centre the map on the location pointed to by the marker.
You can also set your o w n marker. Tap the cursor button, then tap
to place a green marker at the cursor position.
50
To turn markers off, tap
, then
and clear the
checkbox.
4. O ptions button
5. The cursor with streetnam e balloon.
Tap the button in the streetnam e balloon to open the cursor m enu. You can navigate to
the cursor position, make a Favourite of the cursor position, or find a Point of Interest
near the cursor position.
6. The Find button
Tap this button to find specific addresses, favourites or Points of Interest.
7. The zoo m bar
Zoo m in and out by m oving the slider.
Tap the
information:
•
button to set the information sho w n on the map and sho w the follo wing
- select this option to sho w traffic information on the map. W hen traffic
information is sho w n, POIs and Favourites are not sho w n.
Note: LIVE services are only available in designated countries. In order to benefit from
LIVE services, the respective WEBFLEET subscription is needed. For more information on
available services in your country, go to business.tomtom.com/liveservices.
•
- select this option to sho w street and city nam es on the map.
•
- select this option to sho w POIs on the map. Tap
choose which POI categories are sho w n on the map.
•
- select this option to sho w your Favourites on the map.
Tap
•
to
to sho w or hide the follo wing information:
- select this option to enable markers. Markers point to your current location
(blue), your ho m e location (yello w) and your destination (red). The marker sho ws the
distance to the location.
Tap a marker to centre the map on the location w hich the marker is pointing to.
To create your o wn marker, tap the cursor button. Then tap
place a green marker at the cursor position.
To disable markers, tap
•
map.
, then tap
to
and unselect
.
- select this option to sho w GPS coordinates in the lo w er left corner of the
The cursor can be used to do m ore than highlight a location on the map.
Position the cursor on a location on the map, then tap
follo wing buttons:
and then tap one of the
Tap this button to plan a route to the cursor position on the map.
51
Tap this button to vie w information about the location on the map
such as the address.
Tap this button to create your o w n green marker and place it at the
cursor position.
If a green marker exists, this button changes to
.
Tap this button to find a POI near the cursor position on the map.
For exam ple, if the cursor currently highlights a restaurant location
on the map, you can search for a nearby parking garage.
Tap this button to make a map correction for the cursor position on
the map.
You can make the correction only on your o w n map or you can share
the correction with the To m To m Map Share co m m unity.
Tap this button to call the location at the cursor position.
This button is only available if your PRO has the phone nu m ber for
the location.
The phone nu m bers for many POIs are available on your PRO.
You can also call phone nu m bers of your o w n POIs.
Tap this button to create a Favourite at the cursor position on the
map.
Tap this button to create a POI at the cursor position on the map.
Tap this button to travel via the cursor position on the map as part of
your current route. Your destination re mains the sam e as before, but
your route no w includes this location.
This button is only available w hile there is a planned route.
Tap this button to centre the map on the cursor position.
52
M ap
corrections
with
To m
mTo
M ap
Share™
To m To m Map Share helps you correct map errors and share map corrections with the rest
of the To m To m Map Share co m munity.
To correct your map and share map corrections with other Map Share users, tap
in the Services m enu.
Map Share allo ws you to send and receive map corrections for one year after the ne w
version of a map is released.
This m eans that one year after the release date, you can still correct your o w n map but
you cannot send or receive map corrections until you upgrade your map to the latest
version.
Note: TomTom Map Share is not available in all regions. For more information, go to
tomtom.com/mapshare.
To join the Map Share co m m unity, do the follo wing :
1. Tap
in the Services m enu.
2. Tap
.
3. Read the description, then tap
4. Read the description, then tap
.
.
5. Select the category of Map Share corrections you w ant to use for your maps.
6. Tap
.
W hen you connect your PRO to your co m puter, M yTo m To m do w nloads any ne w
corrections and sends your corrections to the Map Share co m m unity.
Map corrections are reported by Map Share users and verified by To m To m.
• Corrections that are reported by Map Share co m m unity m e m bers include :
Changes to the traffic flo w in a street, blocking or renaming a street and adding,
re m oving or editing POIs.
These corrections are im m ediately shared with the Map Share co m m unity.
• Corrections that are reported by Map Share m e m bers and verified by To m To m include :
Missing streets, errors in m otorw ay entrances and exits and missing roundabouts.
These corrections are investigated and verified by To m To m and are included w hen the
next map version is released.
53
You can decide w hich map corrections fro m the Map Share co m m unity are used to
correct your maps. To select a category, tap
in the Map
corrections m enu.
There are three categories of map corrections:
•
by To m To m.
- this category only includes corrections investigated
•
- this category
includes corrections investigated by To m To m and corrections reported by a high
nu m ber of Map Share co m m unity m e m bers.
•
- this category includes corrections investigated by
To m To m and corrections reported by a high nu m ber of Map Share co m munity
m e m bers and corrections reported by only a fe w Map Share co m munity m e m bers.
To do w nload the latest ne w map corrections and to send your o w n corrections, connect
your To m To m PRO to M yTo m To m.
If ne w map corrections are available for your maps, then your PRO will auto matically
do w nload the corrections and update your maps.
You can select the type of corrections you w ant to do w nload, in the Map corrections
settings m enu on your PRO.
If you find an error on your map, you can mark the location using the report button in the
Driving vie w. You can then correct the error and send the correction w hen you have
co m pleted your journey.
For exam ple, you are driving to a friend's house and you notice that the nam e of a street
on your map is different fro m the nam e on the street sign. To mark the location for later
correction, tap the report button and your PRO will record the location.
54
: For safety reasons, do not enter the full details of a map correction while you
are driving. Mark the location of the map error instead and enter the full details later.
To sho w the report button in the Driving vie w, do the follo wing:
1. Tap
in the services m enu.
2. Tap
.
3. Select the type of corrections you w ant to do w nload. Then tap
.
4. Read the instructions on the screen. Then tap
.
5. Select ho w you w ant to share your map corrections. Then tap
.
6. Select
. Then tap
.
The report button is sho w n on the left-hand side of the Driving
vie w.
: For safety reasons, do not enter the full details of a map
correction while you are driving. Mark the location of the map error
instead and enter the full details later.
To correct a map error, do the follo wing :
1. Tap
in the services m enu.
2. Tap
.
3. Select the type of map correction you w ant to report.
4. Select ho w you w ant to select the location.
5. Select the location. Then tap
.
6. Enter the details of the correction. Then tap
7. Tap
.
.
The correction is saved and the information is sent to Map Share.
To make a correction to your map, tap
in the services m enu, then tap
. There are several types of map correction available.
55
Tap this button to block or unblock a street. You can block or unblock
the street in one or both directions.
For exam ple, to correct a street near to your current location, do the
follo wing :
1. Tap
.
2. Tap
to select a street near your current location. You can
select a street by nam e, a street near your Ho m e location or a street
on the map.
3. Select the street or section of a street you w ant to correct by tapping
it on the map.
The street you select is highlighted and the cursor sho ws the nam e
of the street.
4. Tap
.
Your device sho ws the street and w hether the traffic is blocked or
allo w ed in each direction.
5. Tap one of the direction buttons to block or unblock the flo w of traffic
in that direction.
6. Tap
.
The next tim e you connect your device to M yTo m To m, your
corrections are shared with the To m To m Map Share co m m unity.
Tap this button to correct the traffic direction of a one-w ay street, where
the direction of traffic is different to the direction sho w n on your map.
Note: Reverse traffic direction only works for one-way streets. If you
select a two-way street you will be given the chance to block/unblock
the street rather than changing the direction.
56
Tap this button to change the nam e of a street on your map.
For exam ple, to renam e a street near to your current location:
1. Tap
2. Tap
.
3. Select the street or section of a street you w ant to correct by tapping
it on the map.
The street you select is highlighted and the cursor sho ws the nam e
of the street.
4. Tap
.
5. Type the correct street nam e.
6. Tap
.
Tap this button to change and report incorrect road turn restrictions.
Tap this button to change and report the road speed limit.
Tap this button to add or re m ove a roundabout.
Tap this button to add a ne w Point of Interest (POI).
For exam ple to add a ne w restaurant near to your current location:
1. Tap
.
2. Tap
in the list of POI categories.
3. Tap
.
4. Select the location of the missing restaurant.
You can select the location by entering the address or by selecting
the location on the map. Select
or
to open the
map at your current location or at your Ho m e location.
5. Tap
.
6. Type the nam e of the restaurant then tap
.
7. If you kno w the telephone nu m ber of the restaurant you can type it,
then tap
.
If you don’t kno w the nu m ber, just tap
57
without typing a nu m ber.
Tap this button to edit an existing POI.
You can use this button to make the follo wing changes to a POI:
• D elete the POI.
• Renam e the POI.
• Change the telephone nu m ber of the POI.
• Change the category that a POI belongs to.
• M ove the POI on the map.
Tap this button to enter a co m m ent about a POI. Use this button if you
cannot edit the error with the POI using the
button.
Tap this button to correct the location of a house num ber. Enter the
address that you wish to correct and then indicate on the map the
correct location of that house nu m ber.
Tap this button to edit an existing street. O nce you have selected the
street, you can select an error to report. You can select m ore than one
type of error for a street.
Tap this button to report a missing street. You have to select the start
and end points of the missing street.
Tap this button to report an error about a city. You can report the
follo wing types of error:
• City is missing
• Wrong city nam e
• Alternative city nam e
• Other
Tap this button to report an error about a m otorw ay entrance or exit.
Tap this button to report an error about a postcode.
Tap this button to report other types of corrections.
These corrections are not im m ediately applied to your map. Your
To m To m PRO sends a special report to To m To m Map Share.
You can report missing streets, errors in m otorway entrances and exits
and missing roundabouts. If the correction you w ant to report is not
covered by any of these report types, enter a general description then
tap Other.
58
S ounds
and
voices
Your To m To m PRO uses sound for the follo wing:
• Driving directions and other route instructions
• Traffic information
• W arnings that you set
• Hands-free phone calls
There are tw o types of voice available for your PRO :
• Co m puter voices
Co m puter voices are generated by your PRO. They provide route instructions and read
aloud city and street nam es, traffic and w eather reports, user m essages and tutorials.
• Hu man voices
These are recorded by an actor and only provide route instructions.
Your To m To m PRO uses text-to-speech technology and co m puter voices to read the
street nam es on your map as it guides you on your route.
The co m puter voice analyses the whole phrase or sentence before speaking, to ensure
that the sentence sounds as close as possible to natural speech.
Co m puter voices can recognise and pronounce foreign to w ns and street nam es. For
exam ple, the English co m puter voice can read and pronounce French street nam es.
: Co m puter voices are not available in all languages.
If you require a co m puter voice and your language is unavailable, then you need to install
and use the English language co m puter voice. For m ore information on co m puter voices,
go to
.
To select a different voice on your To m To m PRO, tap
tap
and select the required voice.
in the settings m enu. Then
You can change the volu m e on your To m To m PRO in several w ays.
• In the Driving vie w.
59
Tap the central panel on the status bar and m ove the slider to adjust the volu m e. The
last route instruction is played so you can hear the ne w volu m e level.
• In the Settings m enu.
Tap
in the Main m enu, then tap
the volu m e. Tap
to listen to the ne w volu m e level.
and m ove the slider to adjust
To set your To m To m PRO to auto matically adjust the volu m e, do the follo wing:
1. Tap
in the M ain m enu.
2. Tap
.
3. Select
response to engine noise.
4. Tap
to auto matically adjust the volu m e inside the car in
.
60
W O RK
settings
In the
Use the
m enu, there is a
m enu.
m enu to do the follo wing :
• If you are using your PRO together with a LINK, choose to use the GPS signal either fro m
your To m To m navigation device or fro m your LINK.
: Make sure the GPS source you select has a clear vie w of the sky. This is
needed for good GPS reception.
• Select to read aloud inco ming orders and W EBFLEET m essages auto matically.
• Select a w arning sound for dangerous driving and for idling.
61
A djust
odo
meter
W hen you use the logbook you need to synchronise the odo m eter on your To m To m PRO
with your vehicle’s odo m eter.
1. Tap the screen to bring up the main m enu.
2. Tap
3. Tap
.
.
4. Tap the buttons to adjust the odo m eter to match your vehicle’s odo m eter.
5. Tap
to save the changes.
62
Change
vehicle
The following information applies when your TomTom PRO 7xxx is connected to a
TomTom LINK.
W hen you change the vehicle you need to connect your PRO to the LINK installed in the
ne w vehicle.
: The list of orders and m essages, all reporting information, and all m essages
are deleted w hen you change vehicle.
1. Tap the screen to bring up the main m enu.
2. Tap
3. Tap
.
.
4. Select the LINK you w ant to connect your PRO device to fro m the list of Bluetooth
devices.
Enter the activation code fro m your W EBFLEET contract confirmation and the licence
plate nu m ber and choose the applicable vehicle type (see
(7)).
63
Connection
status
To see the connection status of your PRO, your LINK and W EBFLEET, do the follo wing:
1. Tap the screen to bring up the main m enu.
2. Tap
3. Tap
.
.
Here you have a brief overvie w of the connection status:
• G S M connection
• GPRS connection
• Connection to To m To m W EBFLEET
• If Bluetooth is disabled and ho w to enable it.
• If the LINK is disconnected and ho w to initiate the reconnection.
• If an ecoPLUS is connected to the LINK.
• The progress of the calibration of the LINK to record driving events.
• If the LINK has not been activated and ho w to activate it.
Note: To activate your LINK you need the activation code found in the contract
confirmation letter.
64
65
Considerations
This section contains im portant considerations for the use of your To m To m PRO together
with the To m To m LINK and/or To m To m W EBFLEET.
The following applies when you are using a TomTom PRO 7xxx connected to a TomTom
LINK.
If you are using your PRO together with a LINK, these devices m ust be connected to fully
benefit fro m the additional W ORKsmart T M functionality.
M essages you send to the office are only sent w hen your PRO and the LINK are connected.
W hen there is no connection betw een the tw o devices, the m essages are stored on your
PRO.
This m eans, for exam ple, that if you change the logbook m ode fro m
to
w hile the tw o devices are disconnected, the logbook records the tim e you
change the trip as the tim e w hen you connect the devices.
The following applies when you are using a TomTom PRO 9xxx connected to TomTom
WEBFLEET.
If you are using your PRO device connected to W EBFLEET, the PRO device m ust maintain
connection to the W EBFLEET service to fully benefit fro m the additional W ORKsmart T M
functionallity.
M essages are only sent to your office if your PRO is connected to W EBFLEET. W hen there
is no connection, the m essages are stored on your PRO device.
Status m essage configuration and the selection betw een
can only be made by the office.
66
and
S ettings
You can change the w ay your To m To m PRO looks and behaves. M ost of the settings on
your device can be accessed by tapping
in the Main M enu.
Tap this button to reduce the brightness of the screen and display the
map in darker colours.
W hen driving at night or w hen driving through a dark tunnel, it is easier
to vie w the screen and less distracting for the driver, if the brightness of
the screen is dim m ed.
Tap this button to increase the brightness of the screen and display the
map in brighter colours.
Tap this button to switch off voice guidance. You will no longer hear
spoken route instructions, but you will still hear information such as,
traffic information and warnings.
Voice guidance is also switched off if you tap
Settings m enu.
in the
Note: If you change the voice on your PRO, then voice guidance is
automatically switched on for the new voice.
Tap this button to switch on voice guidance and hear spoken route
instructions.
Tap this button to open the phone settings m enu.
For m ore information on connecting your phone and making hands-free
calls, see
.
67
Tap
to navigate to e m ergency services centres and other specialist
services and contact the m by phone.
For m ore information, see
.
Tap this button to manage your favourites or change your ho m e
location as described belo w.
Tap this button to add, renam e or delete Favourites.
Favourites provide an easy w ay to select a location without the need to
enter the address. They do not need to be favourite places, they can
sim ply be seen as a collection of useful addresses.
To create a ne w Favourite, tap
. Then enter the location address in
the sam e w ay that you enter an address w hen you plan a route.
To vie w or change an existing Favourite, tap one of the ite ms in the list.
To see m ore Favourites on the map, tap the left or right buttons.
68
Tap this button to set or change your Ho m e location. You enter the
address in the sam e w ay as you do w hen you plan a route.
Your Ho m e location provides an easy w ay to plan a route to an
im portant location.
For m ost people, your Ho m e location will be your ho m e address.
Ho w ever, you might prefer to set the location to another regular
destination, such as your w orkplace.
Tap this button to add up to six buttons to your o w n personalised m enu.
If there are only one or tw o buttons in your m enu, both buttons are
sho w n in the Driving vie w.
If you have three or m ore buttons in your m enu, then a single button is
sho w n in the Driving vie w w hich opens your m enu w hen tapped.
Tap this button to change the voice that gives spoken directions and
other route instructions.
A wide range of voices are available. There are co m puter voices w hich
can read street nam es and other information directly fro m the map and
there are hu man voices w hich have been recorded by actors.
Tap this button to set the type of spoken directions and other route
instructions your To m To m PRO will read aloud.
Tap this button to set the volu m e level for your To m To m PRO. M ove the
slider to change the volu m e.
Tap this button to select the loudspeaker or loudspeaker connections
that are used on your To m To m PRO.
69
Tap this button to set w hat happens w hen your To m To m PRO starts.
Tap this button to select the tim e format. As soon as you have a GPS fix,
the tim e will be set auto matically. If you don’t have a GPS fix, you can
choose to set the tim e manually.
Tap this button to edit your vehicle profile. A vehicle profile is a
collection of information about the vehicle you are driving or planning a
route for.
truck map.
Truck-specific features are only supported w hen using a
70
Tap this button to manage your o wn POI categories and locations.
: To report incorrect or missing information about an existing Point
of Interest included with your map, use the Map Share service to share
your corrections with the Map Share co m m unity.
You can set your PRO to let you kno w w hen you are near to selected
POI locations. In this way, you could for exam ple, set the device to let
you kno w w hen you are approaching a petrol station.
You can create your o w n POI categories and add your o w n POI
locations to these categories.
You can for exam ple, create a ne w POI category called, Friends. You
could then add all your friend’s addresses as POIs in this ne w category.
If you add their phone nu m bers, you can call the m on your m obile
phone using the hands-free calling feature on your PRO.
Tap the follo wing buttons to create and maintain your o w n POIs.
•
- tap this button to add a location to one of your o w n POI
categories.
•
- tap this button to set your PRO to w arn you
w hen you are near selected POIs.
•
- tap this button to delete one of your o w n POI categories.
•
- tap this button to edit one of your o w n POIs.
•
•
- tap this button to create a ne w POI category.
categories.
- tap this button to delete one of your o w n POI
Tap this button to select the types of Point of Interest (POI) you want to
see on the map.
1. Tap
in the Settings m enu.
2. Select the POI categories you w ant to be sho w n on the map.
Tap
and use the keyboard to search for a category nam e.
3. Select w hether you w ant POIs to be sho w n in 2D or 3D vie ws of the
map.
4. Tap
.
Point of Interest locations are sho w n on the map as sy m bols.
71
Tap this button to select the map you w ant to use for route planning and
navigation.
Although you can store m ore than one map on the device, you can only
use one map at a tim e for planning and navigation.
To switch fro m the current map to plan a route in another country or
region, sim ply change this setting.
Note: When you first select a new map, you may need to connect to
your MyTomTom account and activate the map.
Tap this button to set the way your To m To m PRO calculates the routes
that you plan.
Set the type of route you w ant your PRO to calculate.
Tap
to set if you w ant the device to use IQ Routes information
to help find the best route.
Set w hether you w ant your To m To m PRO to replan the current route if a
faster route is found w hile you are driving. This is useful if traffic builds
up or clears, further ahead on your route.
Set w hether you w ant to be w arned if your route passes through an
area w here your map contains only limited information.
Set ho w your PRO should manage toll roads and ferry crossings w hen
the device calculates a route.
Set w hether you w ant the route su m mary screen to close auto matically
after you plan a route. If you select
, then you will need to tap
to close the route su m mary screen every tim e you plan a route.
Tap this button to select the safety features you w ant to use on your
To m To m PRO.
Tap this button to select the car sy m bol that sho ws your current
location in the Driving vie w.
72
Tap this button to set the default vie w of the map. To switch betw een
2D and 3D vie ws w hile driving, tap the centre part of the status bar in
Driving Vie w.
It is so m etim es easier to vie w the map fro m above, such as w hen
navigating a co m plex road netw ork.
The 2D vie w sho ws a tw o dim ensional vie w of the map as though
vie w ed fro m above.
The 3D vie w sho ws a three dim ensional vie w of the map as though
you are driving through the landscape.
The follo wing buttons are available :
•
- tap this button so
the map is rotated auto matically with the direction you are
travelling alw ays at the top.
•
- tap this button to
sho w the map auto matically in 3D vie w w hen you are follo wing a
route.
Tap this button to select the information you w ant to see on the status
bar.
•
•
- sho w the status bar at the botto m of the Driving vie w.
vie w.
- sho w the status bar on the right-hand side of the Driving
•
: The speed limit is sho w n next to your current speed and
your speed is sho w n in red, if you drive faster than the speed limit.
Information about speed limits is not available for all roads.
•
•
•
- the distance to your destination.
- your PRO sho ws ho w late or early you will arrive,
co m pared with your preferred arrival tim e that w as set w hen you
planned the route.
Tap this button to select the colour sche m es for day and night map
colours.
Tap
to search for a colour sche m e by typing the nam e.
To do w nload m ore colour sche m es, go to
73
.
Tap this button to set the brightness of the screen. M ove the sliders to
adjust the brightness level.
To vie w the map and m enus in day or night colours, tap
or
in the Settings m enu.
Tap this button to select the keyboards that should be available and the
layout of the Latin keyboard.
You use the keyboard to enter nam es and addresses, such as w hen you
plan a route or search for the na m e of a to w n or a local restaurant.
Tap this button to change the language used for all the buttons and
m essages you see on your PRO.
You can choose fro m a wide range of languages. W hen you change the
language, you are also given the opportunity to change the voice.
Tap this button to set the units used on your PRO for features such as
route planning and w eather reports.
Tap this button to make it easier for right- or left-handed operation.
This will affect ite ms such as the zoo m bar w hen you are vie wing the
map.
Tap this button to set the po w er saving features on your PRO.
74
Tap this button to find technical information on your To m To m PRO such
as the device serial num ber, application version and the map version.
You can also vie w the current status for GPS reception.
Tap this button to select the follo wing advanced settings:
•
- w hen this setting is
selected, addresses are sho w n with the house nu m ber follo w ed by
the streetnam e, such as
.
•
- w hen this setting is selected, street nam es are
sho w n on the map in the Driving Vie w. You do not need to select this
option w hen your PRO is set to read aloud street nam es using a
co m puter voice.
•
- w hen this setting is selected, the nam e of
the next street on your route is sho w n at the top of the Driving vie w.
•
- w hen this setting is selected, the
nam e of the street you are on is sho w n at the botto m of the Driving
vie w.
•
- w hen this setting is selected, a graphical
previe w of your destination is sho w n during route planning.
•
•
•
- w hen this setting is selected, a graphical vie w of
the road ahead sho ws w hich lane you need w hen you approach a
junction or m otorw ay exit. This feature is not available for all roads.
•
•
75
Tap this button to delete all your personal settings and restore the
standard factory settings to your To m To m PRO.
This is not a softw are update and will not affect the version of the
software application installed on your PRO.
:
If you w ant to keep your personal information and settings, you should
of your PRO
. You
can then restore all your personal information and settings after you
reset the device. This includes ite ms such as your Ho m e and Favourite
locations, your personal m enu and your POI categories and POI
locations.
All m essages and orders will be deleted.
You will also need to re-enter your W EBFLEET activation code in order
to use the W ORKsmart features, for exam ple, m essaging, order
manage m ent, w orking tim e or logbook reporting. This information is
N O T stored in a backup.
76
Points
of Interest
Points of Interest or POIs are useful places on the map.
Here are so m e exam ples:
• Restaurants
• Hotels
• M useu ms
• Parking garages
• Petrol stations
: To report incorrect or missing information about an existing Point of Interest included
with your map, use the Map Share service to share your corrections with the Map Share
co m munity.
: You can do w nload POI sets and share your o w n POI sets using M yTo m To m.
1. Tap the screen to open the Main M enu.
2. Tap
.
3. Tap
.
4. If there are no POI categories or the one you w ant to use does not exist, tap
and create a ne w category.
Every POI must be assigned to a POI category. This m eans you need
to have created at least one POI category before you can create your
first POI.
You can only add POIs to POI categories you have created.
For m ore information on creating POI categories, read
.
5. Tap
.
6. Select the POI category you w ant to use for the ne w POI.
7. Tap a button to enter the POI address in the sa m e w ay that you plan a route.
77
Tap this button to set your Ho m e location as a POI.
This is useful if you decide to change your Ho m e location, but first
w ant to create a POI using the current Ho m e address.
Tap this button to create a POI fro m a Favourite.
You might w ant to create a POI fro m a Favourite because you can
only create a limited nu m ber of Favourites. If you w ant to create
m ore Favourites you need to delete so m e Favourites. To avoid losing
a Favourite, save the location as a POI before you delete the
Favourite.
Tap this button to enter an address as a ne w POI.
W hen you enter an address, you can choose fro m four options.
•
•
•
•
Tap this button to select a POI location fro m a list of places you have
recently used as destinations.
Tap this button to use To m To m Local Search with To m To m Places to
search for shops and businesses in and around your current location.
You can choose to search for shops and businesses near you, near
your destination, near any other destination or in a city.
For exam ple, if you are looking for a swim ming pool near your
current location, enter ’swim ming pool’ and choose the best search
result.
Tap this button to add a Point of Interest (POI) as a POI.
For exam ple, if you are creating a category of POIs for your favourite
restaurants, use this option instead of entering the addresses of the
restaurants.
Tap this button to add your current location as a POI.
For exam ple, if you stop so m e w here interesting, you can tap this
button to create a ne w POI at the current location.
Tap this button to create a POI using the map bro wser.
Use the cursor to select the location of the POI, then tap
.
Tap this button to create a POI by entering latitude and longitude
values.
78
Tap this button to create a POI by saying the address.
Tap this button to select the location w here your PRO w as last
docked.
The POI is created and saved in the selected category.
W hen you plan a route, you can use a POI for the destination.
The follo wing exam ple sho ws ho w to plan a route to a car park in a city :
1. Tap
in the Main m enu.
2. Tap
3. Tap
.
.
: The last POI you vie w ed on your PRO is also sho w n in the m enu.
4. Enter the nam e of the to w n or city and select it w hen it is sho w n in the list.
5. Tap the arro w button to expand the list of POI categories.
: If you already kno w the nam e of the POI you w ant to use, you can tap
enter the nam e and select this location.
6. Scroll do w n the list and tap
to
.
The car park closest to your destination is sho w n at the top of the list.
The follo wing table explains the distances sho w n next to each POI. Ho w the distance is
m easured varies depending on ho w you initially searched for the POI:
• POI near you - distance fro m your current location
• POI in city - distance fro m the city centre
• POI near Ho m e - distance fro m your Ho m e location
• POI along route - distance fro m your current location
• POI near destination - distance fro m your destination
7. Tap the nam e of the car park you want to use and tap
calculated.
Your To m To m PRO starts to guide you to the car park.
79
w hen the route has been
: You can also use Local Search to find useful locations. For m ore information, about
Local Search and other LIVE Services go to to mto m.co m/services.
Tap this button to select the types of Point of Interest (POI) you want to
see on the map.
1. Tap
in the Settings m enu.
2. Select the POI categories you w ant to be sho w n on the map.
Tap
and use the keyboard to search for a category nam e.
3. Select w hether you w ant POIs to be sho w n in 2D or 3D vie ws of the
map.
4. Tap
.
Point of Interest locations are sho w n on the map as sy m bols.
Many of the POIs on your To m To m PRO include phone nu m bers. This m eans you can use
your PRO to call the POI and plan a route to the location of the POI.
For exam ple, you can search for a restaurant that serves South-East Asian cuisine, call to
reserve a table and plan a route to the restaurant, and all using your PRO.
1. Tap the phone button in the Driving vie w.
If the button is not visible in the Driving vie w, tap
m enu and select
to display the button in the Driving vie w.
2. Tap
in the settings
.
3. Select ho w you w ant to search for the POI.
For exam ple, if you w ant to search for a POI on your route, tap
.
4. Tap the type of POI you w ant to call.
For exam ple, if you w ant to call a cine ma to reserve a ticket, tap
and then select
the nam e of the cine ma you w ant to call. Then tap
or
to make the phonecall.
Your PRO uses your m obile phone to call the POI.
You can set a w arning sound or m essage to be played or displayed w hen you approach a
selected type of POI, such as a petrol station.
The follo wing exam ple will sho w ho w to set a w arning sound to be played w hen you are
250 m etres fro m a petrol station.
1. Tap
2. Tap
in the settings m enu.
.
3. Scroll do w n the list and tap
.
80
: To re m ove a warning, tap on the category nam e and then tap
. POI categories
w hich have been set with a w arning, have a sound sy m bol next to the category nam e.
4. Set the distance as 250 m etres and tap
5. Select
and then tap
.
.
6. Select the w arning sound for the POI and then tap
.
7. If you only w ant to hear the w arning w hen the POI is directly on a planned route, select
. Then tap Done.
The w arning is set for the selected POI category. You will hear a w arning sound w hen
you are 250 m etres fro m a petrol station on your route.
Tap this button to manage your POI categories and locations.
: To report incorrect or missing information about an existing Point
of Interest included with your map, use the Map Share service to share
your corrections with the Map Share co m m unity.
You can set your PRO to let you kno w w hen you are near to selected POI locations. In this
w ay, you could for exam ple, set the device to let you kno w you w hen you are approaching
a petrol station.
You can create your o w n POI categories and add your o w n POI locations to these
categories.
This m eans you can for exam ple, create a ne w POI category called, Friends. You could
then add all your friend’s addresses as POIs in this ne w category. If you add their phone
nu m bers, you can call the m on your m obile phone using the hands-free calling feature on
your PRO.
Tap the follo wing buttons to create and maintain your o w n POIs.
•
•
•
•
•
•
- tap this button to add a location to one of your o w n POI categories.
selected POIs.
- tap this button to set your PRO to w arn you w hen you are near
- tap this button to delete one of your o wn POI categories.
- tap this button to edit one of your o w n POIs.
- tap this button to create a ne w POI category.
- tap this button to delete one of your o w n POI categories.
81
H elp
Tap
in the Main m enu or the Settings m enu to navigate to e m ergency services
centres and other specialist services and contact the m by phone.
For exam ple, if you are involved in a car accident, you could use the Help m enu to call the
nearest hospital and tell the m your exact location.
To use Help to locate a service centre, contact the centre by phone and navigate fro m your
current location to the centre, do the follo wing:
1. Tap the screen to bring up the Main M enu.
2. Tap
3. Tap
or tap
, then tap
.
.
4. Select the type of service you require, for exam ple, N earest hospital.
5. Select a centre fro m the list, the nearest is sho w n at the top of the list.
Your PRO sho ws your position on the map along with a description of the location. This
helps you explain w here you are w hile making a call.
If a phone is connected to your PRO, your PRO auto matically dials the phone num ber.
If no phone is connected, the phone nu m ber is displayed for you to call.
6. To navigate your w ay to the centre by car, tap
.
. If you are on foot, tap
Your PRO starts guiding you to your destination.
Note: In some countries, information may not be available for all services.
Tap this button to find the contact details and location of a service
centre.
Tap this button to navigate your w ay by car to a service centre.
82
Tap this button to navigate your way on foot to a service centre.
Tap this button to see your current location on the map. You can then
tap
and select the type of service you w ant to contact
and tell the m your exact location.
Tap this button to read a selection of guides including a First Aid
guide.
Tap this button to read a selection of guides relating to your
navigation device.
83
A bout
handsfre e
calls
If you have a m obile phone with Bluetooth®, you can use your To m To m PRO to make
phone calls and send and receive m essages.
: N ot all phones are supported or co m patible with all features. For m ore
information, go to
.
First you m ust establish a connection betw een your m obile phone and your To m To m
PRO.
Tap
in the settings m enu, then tap
w hen it is sho w n in the list.
and select your phone
You only need to do this once and your To m To m PRO will re m e m ber your phone.
:
• M ake sure that you switch on Bluetooth® on your phone.
• M ake sure that your phone is set to ‘discoverable’ or ‘visible to all’.
• You may have to enter the passw ord ‘0000’ on your phone in order to connect to your
To m To m PRO .
• Save your To m To m PRO as a trusted device on your phone. Otherwise you need to
enter ‘0000’ every tim e you use the phone.
For additional information about Bluetooth® settings, refer to your m obile phone user
guide.
W hen you have established a connection betw een your To m To m PRO and your m obile
phone, you can use your PRO to make hands-free calls on your m obile phone.
To make a phone call, tap the phone button in the Driving Vie w. Then tap one of the
follo wing buttons:
• Tap
to call your Ho m e location.
If you have not entered a nu m ber for your Ho m e location this button is unavailable.
• Tap
• Tap
to enter a phone nu m ber to call.
to choose a Point of Interest (POI) to call.
If your PRO kno ws the phone nu m ber of a POI, this is sho w n next to the POI.
• Tap
to select a contact fro m your phonebook.
84
Note: Your phonebook is automatically copied to your PRO when you first establish a
connection with your mobile phone.
Not all phones can transfer the phonebook to your PRO. For more information, go to
www.tomtom.com/phones/compatibility.
• Tap
using your PRO.
• Tap
to select fro m a list of people or nu m bers you have called recently
to select fro m a list of people or nu m bers w ho called you recently.
O nly calls you have received on your PRO are saved in this list.
W hen so m eone calls you, the caller’s nam e and phone nu m ber are sho w n. Tap the screen
to accept or reject the call.
You can set your To m To m PRO to auto matically answ er inco ming phone calls.
To set auto matic answ ering, tap
.
in the settings m enu, then tap
Select ho w long your PRO will w ait before auto matically answ ering your calls, then tap
.
You can establish connections for up to 5 m obile phones.
To add m ore phones, do the follo wing.
1. Tap
in the Main M enu.
2. Tap
.
3. Tap
and follo w the instructions.
To switch betw een phones, tap
w ant to connect to.
. Then tap the button for the phone you
W hen you open the M obile Phone m enu, the follo wing buttons are available :
Tap this button to manage the m obile phones that will be connected
to your PRO.
You can add a profile for up to five different m obile phones.
Tap this button to put yourTo m To m PRO into flight m ode.
Tap this button to change the auto-answ er settings.
85
Tap this button to change your Ho m e phone nu m ber.
Tap this button to disable Bluetooth on your To m To m PRO .
Tap this button to select information you w ant to delete. You can
delete the list of recent callers and the list of recently dialled
nu m bers.
86
Favourites
Favourites provide an easy w ay to select a location without the need to enter the address.
They do not need to be favourite places, they can sim ply be seen as a collection of useful
addresses.
To create a Favourite, do the follo wing:
1. Tap the screen to bring up the Main M enu.
2. Tap
to open the Settings m enu.
3. Tap
.
4. Tap
5. Tap
.
.
6. Select the type of the Favourite by tapping one of the buttons described belo w :
You can set your Ho m e location as a Favourite.
You cannot create a Favourite fro m another Favourite. This option
will alw ays be unavailable in this m enu.
To renam e a Favourite, tap
in the Settings m enu.
You can enter an address as a Favourite.
Create a ne w Favourite by selecting a location fro m a list of your
recent destinations.
87
Tap this button to use To m To m Local Search with To m To m Places to
find locations such as shops and businesses and save the m as
Favourites.
For exam ple, if you are looking for a swim ming pool near your
current location, enter ’swim ming pool’ and choose the best search
result.
If you visit a POI you particularly like, for exam ple a restaurant, you
can add it as a Favourite.
Tap this button to add your current location as a Favourite.
For exam ple, if you stop so m e w here interesting, while you are there
you can tap this button to create the Favourite.
Tap this button to create a Favourite using the Map Bro wser.
Select the location of the Favourite using the cursor, then tap
.
Tap this button to create a Favourite by entering latitude and
longitude values.
Tap this button to create a Favourite by saying the address.
Tap this button to select your last recorded position as your
destination.
7. Your PRO suggests a nam e for your ne w Favourite. To enter a ne w nam e, there is no
need to delete the suggested nam e, you just start typing.
It is a good idea to give your Favourite a nam e that is easy to re m e m ber.
8. Tap
.
Your ne w favourite appears in the list.
After you have added tw o or m ore Favourites, you are asked w hether you make regular
trips to the sam e locations. If you tap
, you can enter these destinations as your
favourite destinations. Every tim e you switch on your device, you can im m ediately
select one of these locations as your destination.To change these destinations or select
a ne w destination, tap
in the Settings m enu, then select
.
You can use a Favourite as a w ay of navigating to a place without having to enter the
address. To navigate to a Favourite, do the follo wing:
1. Tap the screen to bring up the Main M enu.
88
2. Tap
3. Tap
.
4. Select a Favourite fro m the list.
You see your Favourite on the map. You can tap
to see a list of parking POIs
near to your Favourite. You can also call the Favourite or see m ore information about it.
5. Tap Select to choose to navigate to this Favourite.
Use the left and right arro ws to choose another Favourite fro m your list.
Your PRO calculates the route for you.
6. W hen the route is calculated, tap
.
Your PRO will im m ediately start guiding you to your destination with spoken instructions
and visual instructions on the screen.
To change the nam e of a Favourite, do the follo wing:
1. Tap the screen to bring up the Main M enu.
2. Tap
to open the Settings m enu.
3. Tap
.
4. Tap the Favourite you w ant to renam e.
Use the left and right arro ws to choose another Favourite fro m your list.
5. Type in the ne w nam e and then tap
6. Tap
.
.
To delete a Favourite, do the follo wing :
1. Tap the screen to bring up the Main M enu.
2. Tap
to open the Settings m enu.
3. Tap
.
4. Tap the Favourite you w ant to delete.
Use the left and right arro ws to choose another Favourite fro m your list.
5. Tap
6. Tap
to confirm the deletion.
.
89
LIVE
Services
There are a range of LIVE Services available for your To m To m PRO. These services are
subscription-based and currently include the follo wing :
• To m To m HD Traffic
• Speed Cam eras
• W eather
• Local Search with To m To m Places
• Q uickGPSfix T M (To m To m PRO 9xxx devices only)
Note: LIVE services are only available in designated countries. In order to benefit from
LIVE services, the respective WEBFLEET subscription is needed. For more information on
available services in your country, go to business.tomtom.com/liveservices.
The follo wing information applies only to To m To m PRO 9xxx devices.
Your To m To m navigation device contains a G S M/GPRS m odule w hich can interfere with
electrical devices such as cardiac pace makers, hearing aids and aviation equip m ent.
Interference with these devices may endanger the health or life of others.
Do not use your navigation device near unprotected electrical units or in areas w here the
use of m obile telephones is prohibited, such as hospitals and airplanes.
To m To m HD Traffic is a unique To m To m service providing real-tim e traffic
information.
In co m bination with IQ Routes, HD Traffic helps you plan the optim u m route to your
destination taking into account the current local traffic conditions.
Your To m To m PRO regularly receives information about the changing traffic conditions.
If traffic jams or other incidents are found on your current route, your PRO will offer to
replan your route to try and avoid any delays.
TomTom Places
Using local search, you can search the To m To m Places listings to find shops and
businesses, then plan a route to the destination you choose.
90
To find a location using local search and plan a route there, follo w the steps belo w. In this
exam ple, you search for a supermarket near to your current position.
1. Tap the screen to bring up the Main M enu, then tap
2. Tap the
.
button.
3. Tap
.
4. Type ’supermarket’ then tap
.
The locations that match your search are sho w n in a list with their distance fro m your
current location.
5. Tap one of the locations in the list.
The location is sho w n on the map.
Tap
6. Tap
to see m ore information about this location.
.
Choose w hether you w ant to navigate there, sho w the location on a map, travel via that
location or add it as a favourite.
The Speed Cam eras service w arns you about the follo wing roadside cam era
locations:
• Speed cam era locations.
• A ccident blackspot locations.
• M obile speed cam era locations.
• A verage speed cam era locations.
• Toll road ca m era locations.
• Traffic light ca m era locations.
The follo wing services are also available on your To m To m PRO :
The W eather service gives you five-day w eather reports for any location on
your map.
The follo wing information applies only to To m To m PRO 9xxx devices.
Q uickGPSfix contains information about GPS satellite positions w hich helps your
To m To m PRO find your position faster.
91
Traffic
inform ation
You can receive traffic information in tw o w ays:
• To m To m HD Traffic
• Traffic M essage Channel (RDS-T M C)
Using traffic information, your To m To m PRO can auto matically adjust your route to
minimise any delays.
To m To m HD Traffic is a unique To m To m service providing real-tim e traffic
information.
In co m bination with IQ Routes, HD Traffic helps you plan the optim u m route to your
destination taking into account the current local traffic conditions.
Your To m To m PRO regularly receives information about the changing traffic conditions.
If traffic jams or other incidents are found on your current route, your PRO will offer to
replan your route to try and avoid any delays.
The follo wing information applies only to To m To m PRO 9xxx devices.
So m e To m To m navigation devices contain a G S M/GPRS m odule w hich can interfere with
electrical devices such as cardiac pace makers, hearing aids and aviation equip m ent.
Interference with these devices may endanger the health or life of you or others.
If your device includes a G S M/GPRS m odule, do not use it near unprotected electrical
units or in areas w here the use of m obile telephones is prohibited, such as hospitals and
airplanes.
The Traffic M essage Channel (T M C) also kno w n as RDS-T M C, transmits traffic information
as a radio signal and is available free of charge in many countries.
T M C is not a To m To m Service, but is available w hen using the To m To m RDS-T M C Traffic
Receiver.
Note: TomTom is not responsible for the availability or quality of traffic information
provided by the Traffic Message Channel.
The Traffic Message Channel (TMC) is not available in all countries. To check the
availability of TMC services in your country, go to tomtom.com/traffic.
92
The traffic sidebar is sho w n on the right side of the Driving vie w. The sidebar informs you
about traffic delays w hile you drive, using glo wing dots to sho w you w here each traffic
incident is located on your route.
The top of the traffic sidebar represents your destination and sho ws the
total tim e delay due to traffic jams and other incidents on your route.
The central section of the traffic sidebar sho ws individual traffic
incidents in the order they occur on your route.
The botto m of the traffic sidebar represents your current location and
sho ws the distance to the next incident on your route.
To make the traffic sidebar m ore readable so m e incidents may not be
sho w n. These incidents will alw ays be of minor im portance and only
cause short delays.
The colour of the pointers, as sho w n belo w, gives you an instant indication of the type of
incident:
Unkno w n or undetermined situation.
Slo w traffic.
Q ueueing traffic.
Stationary traffic or road closure.
Your PRO regularly looks for a faster route to your destination. If the traffic situation
changes and a faster route is found, your PRO will offer to replan your journey so you can
use the faster route.
You can also set your PRO to auto matically replan your journey w henever a faster route
is found. To apply this setting, tap
in the Traffic m enu.
To manually find and replan the fastest route to your destination, do the follo wing :
1. Tap the traffic sidebar.
: If you find that tapping the sidebar opens the Main m enu instead of the traffic m enu,
try tapping the sidebar with your finger resting on the edge of the screen.
2. Tap
.
Your PRO searches for the fastest route to your destination.
The ne w route may include traffic delays. You can replan the route to avoid all traffic
delays, but a route w hich avoids all delays will usually take longer than the fastest route.
3. Tap
.
93
Note: Not all devices support setting the radio frequency.
If you kno w the frequency of a particular radio station you w ant to use for RDS-T M C traffic
information, you can set the frequency manually. To activate this feature, you must first
enable manual tuning.
1. Tap the Traffic bar in the Driving Vie w, then tap
2. Select
.
and then tap
.
N o w you can enter the frequency of the radio station.
3. Tap the Traffic sidebar in the Driving Vie w.
4. Tap
.
5. Enter the frequency of the radio station.
6. Tap
.
Your To m To m navigation device looks for your radio station. If it doesn't find a radio
station at the frequency you set, it auto matically continues to search for the next available
station.
You can use To m To m HD Traffic to minimise the im pact of traffic delays on your route. To
minimise delays auto matically, do the follo wing:
1. Tap
in the Main M enu.
2. Tap
.
3. Tap
.
4. Choose betw een alw ays taking the faster route auto matically, being asked or never
changing your route.
5. Tap
and then
.
To manually minimise traffic delays at any tim e, do the follo wing :
1. Tap the Traffic bar in the Driving Vie w.
2. Tap
.
Your PRO plans the quickest route to your destination. The ne w route may include
traffic delays and may re main the sam e as the original route.
You can re-plan the route to avoid all delays, but this route is unlikely to be the quickest
possible route.
3. Tap
.
The
or
buttons in the Traffic m enu lets you check your route
to and fro m w ork with one tap of a button.
W hen you use either of these buttons, your device plans a route betw een your ho m e and
w ork locations and checks the route for possible delays.
94
The first tim e you use
, you must set your traffic ho m e and w ork locations.
1. Tap the traffic sidebar to open the Traffic m enu.
2. Tap
.
3. Set your ho m e location and your w ork location.
If you have already set the locations and w ant to change the m, tap
.
You can no w use the
and
buttons.
Note: The home location you set here is not the same as the home location you can set
in the Settings Menu. In addition, the locations you use here do not have to be your actual
home and work locations. If there is another route that you often travel, you can set Work/
Home to use these locations instead.
For exam ple, to check for delays on your route ho m e before you leave the office, do the
follo wing :
1. Tap the traffic sidebar to open the Traffic m enu.
2. Tap
3. Tap
.
.
The Driving Vie w is sho w n and a m essage is displayed telling you about traffic incidents
on this route. The Traffic sidebar also sho ws any delays.
To check for delays on your route, tap
in the Traffic m enu. Your
navigation device sho ws a su m mary of the traffic delays on your route.
The total includes any delays due to traffic incidents and those due to busy roads, with
information provided by IQ Routes.
Tap
to check if you can reduce the delay.
95
Note: You can also access the Show traffic on route screen by tapping the traffic area of
the LIVE Route summary tab.
Tap the left and right arro w buttons to m ove through each incident in turn, vie wing the
details of each one. This includes the type of incident, for exam ple road w orks, and the
length of delay caused by this incident.
You can also access the details about individual incidents by tapping
Main M enu and then tapping on the traffic incident sy m bol.
in the
W hen sho w n on the map, a traffic incident starts with an icon. In the case of a traffic queue,
the direction of the incident is fro m the icon to w ards the other end.
G et an overvie w of the traffic situation in your area, using the map. To find local incidents
and their details, do the follo wing:
1. Tap the traffic sidebar to open the Traffic m enu.
2. Tap
.
The map overvie w screen is sho w n.
3. If the map does not sho w your location, tap the marker to centre the map on your
current location.
The map sho ws traffic incidents in the area.
4. Tap on any traffic incident to get m ore information.
A screen is sho w n that gives you detailed information about the incident you chose. To
display information about surrounding incidents use the left and right arro ws at the
botto m of this screen.
Use the
button to choose ho w HD Traffic w orks on your navigation device.
1. Tap the traffic sidebar to open the Traffic m enu.
96
2. Tap
.
3. To hear a beep sound w hen a ne w traffic incident occurs on your route, select
and then tap
.
4. If a faster route is found w hile you are driving, Traffic can replan your journey to use the
faster route. Select one of the follo wing options and then tap
.
•
•
•
Traffic incidents and w arnings are sho w n on the map, in the Driving Vie w and on the
Traffic sidebar.
There are tw o types of incident and w arning signs:
• Sy m bols sho w n in a red square are traffic incidents. Your navigation device can replan
to avoid the m.
• Sy m bols sho w n in a red triangle are w eather related. Your device does not replan to
avoid these w arnings.
Traffic incident sy m bols:
W eather related sy m bols:
97
Note: The incident avoided symbol is shown for any traffic
incident that you avoid using a traffic service.
To open the Traffic m enu, tap the Traffic sidebar in the Driving Vie w or tap
Services m enu.
in the
The follo wing buttons are available :
Tap this button to re-plan your route based on the latest traffic information.
Tap this button to calculate the quickest route fro m your ho m e location to your
place of w ork and back.
Tap this button for an overvie w of traffic incidents along your route.
Tap this button to bro wse the map and see the traffic incidents sho w n on the
map.
Tap this button to change your settings for ho w the Traffic service w orks on
your device.
Tap this button to hear spoken information about traffic incidents on your
route.
Note: Your TomTom device must have a computer voice installed to read information
aloud.
98
W eather
The To m To m W eather service provides detailed w eather reports and 5-day w eather
forecasts for to w ns and cities. The information is provided by local w eather stations and
is updated hourly.
To request a w eather report for a specific location, such as the to wn or city for your final
destination, do the follo wing :
1. Tap
2. Tap
3. Tap
su m mary.
in the Main M enu.
.
or
to go directly to a w eather
4. Tap
to choose your location using, for exam ple, an
address, Ho m e, a Favourite or a POI.
A su m mary w eather report for that location is sho w n. Tap on any day of the w eek for a
detailed w eather report.
You can request a w eather forecast for different types of location. The follo wing types of
location are available :
Tap this button to select your Ho m e location.
Tap this button to select a Favourite location.
99
Tap this button to enter an address.
Tap this button to select a location in a list of recently used
destinations.
Tap this button to select a location using a local search.
Tap this button to select a Point of Interest (POI).
Tap this button to select your current location.
Tap this button to select a point on the map.
Tap this button to enter a latitude and longitude map reference.
Tap this button to enter an address by saying the address.
Tap this button to select your last recorded position.
100
Spe
Ca med
eras
The Speed Cam eras service w arns you about the follo wing roadside cam era
locations:
• Speed cam era locations.
• A ccident blackspot locations.
• M obile speed cam era locations.
• A verage speed cam era locations.
• Toll road ca m era locations.
• Traffic light ca m era locations.
By default, w arnings are given 15 seconds before you reach a speed cam era location.
You are w arned in three w ays:
• Your To m To m PRO plays a warning sound.
• The type of speed cam era and your distance fro m the cam era location is sho w n in the
Driving Vie w. If a speed restriction has been reported for the cam era, the speed is also
sho w n in the Driving Vie w.
• The location of the speed cam era is sho w n on the map.
Note: For average speed cameras, you are warned by a combination of icons and sounds
at the start, middle and end of the average speed check zone.
101
To change the nu m ber of seconds or w arning sound, tap
Cam eras m enu.
in the Speed
To change the w ay your To m To m PRO w arns you about speed
cam eras, tap the
button.
You can then set ho w close you w ant to be to a speed ca m era before
you are w arned and w hat type of sound will be played.
For exam ple, to change the sound that is played w hen you approach a
fixed speed cam era, do the follo wing :
1. Tap
in the Main M enu.
2. Tap
.
3. Tap
.
A list of speed cam era types is displayed. A speaker is sho w n next
to the speed cam era types that have been set for an alert.
4. Tap
5. Tap
.
to avoid re m oving the fixed speed cam era alerts.
6. Enter the tim e in seconds for w hen a w arning is given before you
reach a cam era. Then tap
.
7. Tap the sound you w ant to be used for the w arning.
: To switch off w arning sounds for a cam era type, tap
in
step 7 above. You still see a w arning in the Driving Vie w if you switch
off the w arning sound.
8. Tap
to save your changes.
Speed cam eras are sho w n as sy m bols on the Driving Vie w.
W hen you approach an area w here an alert is located, you see a sy m bol and a w arning
sound is played.
You can change both the w arning sound and the nu m ber of seconds that the warning is
issued before reaching the alert.
Fixed speed cam era
M obile speed cam era
Traffic light cam era
102
Toll road cam era
Restricted road ca m era - located on a minor road that reduces traffic on a
larger road
Other cam era
M obile cam era hotspot
A verage speed check
A ccident black spot
Bi-directional speed cam era
Ungated railw ay crossing
To sho w the report button in the Driving Vie w, do the follo wing :
1. Tap
in the Main M enu.
2. Tap
.
3. Tap
4. Tap
.
.
The report button is sho w n on left-hand side of the Driving Vie w or if you are already
using the quick m enu, it’s added to the buttons available in the quick m enu.
To hide the report button, tap
in the Speed Cam eras m enu.
1. Tap the report button sho wn in the Driving Vie w or in the quick m enu to record the
location of the cam era.
If you tap the report button within 20 seconds of receiving a speed cam era warning, you
get the option to add a cam era or re m ove a cam era. Tap
.
2. Tap
reporting.
or
, depending on the type of cam era you are
3. Select the cam era location on the map and confirm that it is correct.
4. Tap the type of fixed cam era you w ant to report, for exam ple, a traffic light cam era.
103
Note: If the type of camera you choose has a speed restriction, you can also enter the
speed.
A m essage confirms that your cam era has been reported to the Speed Cam era team at
To m To m.
You do not need to be at the location of a speed cam era to report the ne w location. To
report a ne w speed cam era location w hile you are at ho m e, do the follo wing :
1. Tap
in the Main M enu on your navigation device.
2. Tap
.
3. Tap
.
4. Tap
or
depending upon the type of speed cam era.
5. Use the cursor to mark the exact location of the cam era on the map, then tap
6. Tap
.
to confirm the location of the cam era.
7. Tap on the type of cam era you w ant to report and if necessary, choose the speed
restriction for the ca m era.
You see a m essage confirming that your cam era has been reported to the Speed
Cam eras team.
You may receive an alert for a cam era that is no longer there. To report an incorrect
cam era alert, do the follo wing :
1. W hile you are at the location of the missing cam era, tap
in the Driving Vie w.
Note: This must be done within 20 seconds of receiving the camera alert.
2. Tap
.
The next tim e you connect your navigation device to the To m To m w ebsite, the cam era
alert is reported as incorrect.
W hen you report a fixed speed cam era, you can select the type of fixed cam era you are
reporting.
These are the different types of fixed speed cam era:
This type of speed cam era checks the speed of passing vehicles.
This type of cam era checks for vehicles breaking traffic rules at traffic
lights.
104
This type of cam era m onitors traffic at toll road barriers.
This type of speed cam era checks the average speed of vehicles
betw een tw o fixed points.
This type of cam era checks traffic on roads w here access is restricted.
All other types of cam era that do not fall into any of the above
categories.
There are several types of visual and audible w arnings that you may see and hear w hen
you m eet an average speed check cam era.
You alw ays receive a start and end zone w arning regardless of the speed you are travelling
at. Interm ediate w arnings, if given, occur every 200 m eters.
All the w arnings are described belo w :
As you approach the start of an average speed check zone, you see a
visual w arning in the top left hand corner of the Driving Vie w with a
distance to the cam era underneath it. You hear an audible w arning.
You also see a small icon on the road sho wing the position of the
average speed check cam era at the start of the zone.
O nce in the speed check zone, if you are not speeding and have already
received a start of zone w arning, you see a visual w arning in the Driving
Vie w. This re minds you that you are still in the speed check zone.
O nce in the speed check zone, if you are driving at over 100% of the
permitted speed and have already received a start of zone w arning, you
see a visual warning in the Driving Vie w indicating the maxim u m
permitted speed. You also hear a small audible w arning. These
w arnings are there to re mind you to slo w do w n...
105
O nce in the speed check zone, if you are driving at over 100% of the
permitted speed and have not received a start of zone w arning, you see
a visual w arning in the Driving Vie w indicating the maximu m permitted
speed. You also hear a loud audible warning.
These w arnings occur at the FIRST interm ediate point only and are
there to re mind you to slo w do w n...
As you approach the end of an average speed check zone, you see a
visual w arning in the Driving Vie w with a distance to the cam era sho w n
underneath it. You hear an audible w arning.
You also see a small icon on the road sho wing the position of the
average speed check cam era at the end of the zone.
To open the Speed Cam eras m enu, tap
.
in the Main M enu and then tap
Tap this button to report a ne w speed cam era location.
Tap this button to set the alerts you will receive and the sounds used for
each alert.
Tap this button to disable alerts.
Tap this button to enable the report button. The report button is sho w n
in the Driving Vie w or in the quick m enu.
W hen the report button is sho w n in the Driving Vie w, this button
changes to
.
106
M yTo
mTo m
M yTo m To m helps you manage the contents, maps and services of your To m To m PRO
navigation device, as w ell as giving you access to the To m To m co m munity. It is a good
idea to frequently connect your navigation device to M yTo m To m, to ensure you always
have the latest updates. You can also log in to M yTo m To m on the To m To m w ebsite.
: W e reco m m end using a broadband internet connection w henever you connect your
navigation device to M yTo m To m.
1
2
To set up M yTo m To m, do the follo wing:
1. Connect your co m puter to the internet.
2. Start a bro wser and go to
.
3. Click
Your bro wser do w nloads the M yTo m To m support application, w hich you need to
install on your co m puter in order to connect your device to M yTo m To m. Follo w the
instructions on the screen if you are asked questions w hile do w nloading.
4. W hen pro m pted, connect the m ount for your device to your co m puter using the
supplied cable. Then place your device in the m ount and switch your device on.
: You should plug the USB connector directly into a USB port on your co m puter
and not into a USB hub or USB port on a keyboard or m onitor.
O nce the M yTo m To m support application is installed, you can access M yTo m To m fro m
the notification area on your desktop.
107
W hen you connect your navigation device to your co m puter, M yTo m To m tells you if
there are any updates for your device.
To do w nload content and services fro m To m To m, you need a M yTo m To m account. You
can create an account w hen you start using M yTo m To m.
Note: If you have more than one TomTom device, you need a separate account for each
device.
108
Custo
m er
support
You can find further online help at
Tap this button to open the Status & information m enu.
Tap this button to vie w technical information about your device, such as
your serial nu m ber for your device and the To m To m A pp version.
Tap this button to see the current status for GPS reception.
109
A ddendu
m
The Global Positioning Syste m (GPS) is a satellite-based syste m that provides location and
timing information around the globe. GPS is operated and controlled under the sole
responsibility of the G overn m ent of the United States of A m erica which is responsible for
its availability and accuracy. A ny changes in GPS availability and accuracy, or in
environ m ental conditions, may im pact the operation of your To m To m device. To m To m
does not accept any liability for the availability and accuracy of GPS.
Use of a To m To m device for navigation still m eans that you need to drive with due care
and attention.
Use of devices with an antenna is prohibited on m ost aircraft, in many hospitals and in
many other locations. A To m To m device m ust not be used in these environ m ents.
D o not leave your To m To m device or To m To m accessories on vie w w hen you leave your
car. They may beco m e an easy target for thieves.
You can set a passw ord for your device w hich m ust be entered every tim e you start your
device.
W e reco m m end that you use the safety preferences on your To m To m device, w here
available. The safety preferences are available in the Preferences m enu.
Take care of your To m To m device and clean it correctly.
• Use a soft cloth to wipe the screen of your device ; do not use any liquid cleaners.
• If your device gets w et, dry it with a soft cloth.
• D o not open the casing of your device under any circu mstances. Doing so may be
dangerous and will invalidate your w arranty.
• If your device includes a m e m ory card, do not use the m e m ory card with any device
other than a To m To m device. Other devices may damage the m e m ory card.
• D o not expose your device to high or lo w te m peratures, w hich can cause permanent
damage. For exam ple, don’t leave it in the car on hot su m m er days or during cold winter
nights.
This product uses a Lithiu m-Poly m er battery. Do not use it in a hu mid, w et and/or
corrosive environ m ent. Do not put, store or leave your product in or near a heat source,
110
in a high te m perature location, in strong direct sunlight, in a micro w ave oven or in a
pressurized container, and do not expose it to te m peratures over 60 C (140 F). Failure to
follo w these guidelines may cause the Lithiu m-Poly m er battery to leak acid, beco m e hot,
explode or ignite and cause injury and/or damage. Do not pierce, open or disasse m ble the
battery. If the battery leaks and you co m e into contact with the leaked fluids, rinse
thoroughly with w ater and seek m edical attention im m ediately. For safety reasons, and to
prolong the lifetim e of the battery, charging will not occur at lo w (belo w 0 C/32 F) or high
(over 45 C/113 F) te m peratures.
Te m peratures: Standard operation: -0 C (32 F) to + 45 C (113 F); short period storage : 20 C (-4 F) to + 60 C (140 F); long period storage : -20 C (-4 F) to + 25 C (77 F).
Do not re m ove or atte m pt to re m ove the non-user-replaceable battery. If you have a
proble m with the battery, please contact To m To m custo m er support.
THE LITHIU M-POLY M ER B A TTERY C O N T AIN ED IN THE PRO D UCT M UST BE
RECYCLED OR DISPO SED O F PROPERLY A CC ORDIN G T O THE LO C AL LA W S
A N D RE G ULA TIO NS A N D ALW A YS SEPARA TE FRO M H O USEH OLD W A STE. BY
D OIN G THIS Y O U WILL HELP C O N SERVE THE EN VIRO N M ENT. USE Y O UR
T O M T O M O NLY WITH THE SUPPLIED D C PO W ER LE A D (C AR CH ARG ER/B A TTERY
C A BLE), A C A D APTER (H O M E CH ARG ER), IN A N APPRO VED CRA DLE OR USIN G THE
S UPPLIED USB C A BLE T O C O N NECT T O A C O MPU TER F OR B A TTERY CH ARGIN G.
Please use this device with the charger provided.
For replace m ent chargers, go to
for your device.
for information about approved chargers
The stated battery life is a maxim u m possible battery life. The maxim u m battery life will
only be achieved under specific atm ospheric conditions. The estimated maximu m battery
life is based on an average usage profile.
For m ore information, see
.
This equip m ent co m plies with the require m ents for CE marking w hen used in a residential,
co m m ercial, vehicular or light industrial environ m ent, achieving all the appropriate
provisions of the relevant legislation in the EU.
0168
Hereby, To m To m declares that To m To m personal navigation devices and accessories are
in co m pliance with the essential require m ents and other relevant provisions of the EU
Directive 1999/5/EC. The declaration of conformity can be found here :
.
This sy m bol on the product or its packaging indicates that this product shall not
be treated as household w aste. In line with EU Directive 2002/96/EC for waste
electrical and electronic equip m ent (W EEE), this electrical product m ust not be
disposed of as unsorted municipal waste. Please dispose of this product by
returning it to the point of sale or to your local m unicipal collection point for
recycling.
111
Devices that contain a G S M m odule are intended for connection to the follo wing
netw orks:
G S M/GPRS 900/1800
This device co m plies with radiation exposure limits set forth for an uncontrolled
environ m ent. In order to avoid the possibility of exceeding the radio frequency exposure
limits, hu man proximity to the antenna shall not be less than 20cm (8 inches) during
normal operation.
The To m To m PRO 71xx displays the C-tick to sho w it co m plies with relevant
A ustralian and N e w Zealand regulations.
The To m To m PRO 91xx displays the A-tick to sho w it co m plies with relevant
A ustralian and N e w Zealand regulations.
A ustralia: 1300 135 604
N e w Zealand : 0800 450 973
M alaysia 1800815318
Singapore 8006162269
Thailand 0018006121008
Indonesia 0018030612011
The user needs to switch off the device w hen exposed to areas with potentially explosive
atm ospheres such as petrol stations, che mical storage depots and blasting operations.
Great care was taken in preparing this manual. Constant product develop m ent may m ean
that so m e information is not entirely up to date. The information in this docu m ent is
subject to change without notice.
To m To m shall not be liable for technical or editorial errors or o missions contained herein;
nor for incidental or consequential damages resulting fro m the performance or use of this
material. This docum ent contains information protected by copyright. N o part of this
docum ent may be photocopied or reproduced in any form without prior written consent
fro m To m To m N.V.
4KH00, 4KI00, 4KJ00, 4KK00, 4KN50
112
Copyright
notices
© 2012 TomTom N.V., The Netherlands. TomTom®, and the "two hands" logo, among
others, are Trademarks owned by TomTom N.V. or one of its subsidiaries. Please see
www.tomtom.com/legal for warranties and end user licence agreements applying to this
product.
© 2012 TomTom N.V., Niederlande. TomTom®, das 'Zwei Hände'-Logo usw. sind
registrierte Marken von TomTom N.V. oder eines zugehörigen Tochterunternehmens. Die
für dieses Produkt geltenden Garantien und Endnutzerlizenzvereinbarungen finden Sie
unter www.tomtom.com/legal.
© 2012 TomTom N.V., Pays-Bas. TomTom® et le logo composé de « deux mains », entre
autres, font partie des marques commerciales appartenant à TomTom N.V. ou l'une de
ses filiales. L'utilisation de ce produit est régie par notre garantie limitée et le contrat de
licence utilisateur final, que vous pouvez consulter à l'adresse suivante :
www.tomtom.com/legal
© 2012 TomTom N.V., Nederland. TomTom® en het logo met twee handen zijn onder
andere handelsmerken die eigendom zijn van TomTom N.V. of een van haar
dochterondernemingen. Ga naar www.tomtom.com/legal voor garanties en
licentieovereenkomsten voor eindgebruikers die van toepassing zijn op dit product.
© 2012 TomTom N.V., The Netherlands TomTom® e il logo delle "due mani", fra gli altri,
sono marchi registrati di proprietà di TomTom N.V. o di una delle sue filiali. Consultare
www.tomtom.com/legal per le garanzie e i contratti di licenza per l'utente finale
applicabili a questo prodotto.
© 2012 TomTom NV, Países Bajos. TomTom™ y el logotipo "dos manos" son marcas
comerciales, aplicaciones o marcas registradas de TomTom NV. Nuestra garantía
limitada y nuestro acuerdo de licencia de usuario final para el software integrado son de
aplicación para este producto; puede consultar ambos en www.tomtom.com/legal.
© 2012 TomTom N.V., Països Baixos. TomTom®, i el logotip amb les "dues mans", entre
altres, formen part de les marques comercials de TomTom N.V. o d'una de les seves filials.
Visiteu www.tomtom.com/legal per a obtenir informació sobre les garanties i els acords
de llicència d'usuari final d'aquest producte.
© 2012 TomTom N.V., Holanda. TomTom® e o logótipo das "duas mãos", entre outras,
são marcas comerciais detidas pela TomTom N.V. ou por uma das suas subsidiárias. Vá
a www.tomtom.com/legal para consultar as garantias e o contratos de licença do
utilizador final aplicáveis a este produto.
© 2012 TomTom NV, Holland. TomTom™ og logoet med "de to hænder" er blandt de
varemærker, produkter og registrerede varemærker, der tilhører TomTom International
B.V. Vores begrænsede garanti og slutbrugerlicensaftale for indlejret software gælder for
dette produkt; begge dokumenter findes på www.tomtom.com/legal.
© 2012 TomTom N.V., Alankomaat. Muun muassa TomTom® ja kaksi kättä -logo ovat
TomTom N.V:n tai sen tytäryhtiöiden omistamia tavaramerkkejä. Katso osoitteesta
www.tomtom.com/legal tätä tuotetta koskevat takuut ja käyttöehtosopimukset.
113
© 2012 TomTom N.V., Nederland. TomTom®, og de "to hender"-logoen, blant andre, er
varemerker eid av TomTom N.V. eller en av deres underleverandører. Vennligst se
www.tomtom.com/legal for gjeldende garantier og lisensavtaler for sluttbrukere for
dette produktet.
© 2012 TomTom NV, Nederländerna. TomTom™ och logotypen "två händer" tillhör de
varumärken, programvaror eller registrerade varumärken som ägs av TomTom
International B.V. Vår begränsade garanti och vårt slutanvändarlicensavtal för inbyggd
programvara kan gälla för denna produkt. Du kan läsa dem båda på www.tomtom.com/
legal.
© 2012 TomTom N.V., Nizozemsko. TomTom® a logo „dvou rukou“ jsou, mimo jiné,
ochranné známky spole nosti TomTom N.V. nebo jejích pobo ek. Navštivte prosím
adresu www.tomtom.com/legal, kde naleznete informace o zárukách a licen ních
smlouvách s koncovým uživatelem vztahujících se k tomuto výrobku.
© 2012 TomTom N.V., Hollandia. A TomTom®, és a „két kéz” embléma, többek között, a
TomTom N.V. vagy leányvállalatai védjegye. A termékre vonatkozó garanciáról és a
végfelhasználói licencszerz désekr l részleteket a www.tomtom.com/legal oldalon
olvashat.
© 2012 TomTom N.V., Holandia. TomTom™ i logo z dwiema d o mi, oraz inne, s
zarejestrowanymi znakami towarowymi firmy TomTom N.V. lub jednej z jej spó ek
zale nych. Informacje o gwarancjach i umowach licencyjnych dla ko cowego
u ytkownika tego produktu znajduj si na stronie www.tomtom.com/legal.
© 2012 TomTom N.V., Holandsko. TomTom® a logo „dve ruky“ sú okrem alších
ochranné známky, ktoré vlastní spolo nos TomTom N.V. alebo jedna z jej dcérskych
spolo ností. Pozrite si stránku www.tomtom.com/legal, ak chcete informácie o zárukách
a dohody o licencii pre koncového používate a týkajúce sa tohto produktu.
© 2012 TomTom N.V., Madalmaad. TomTom® ja "kahe käe" logo kuuluvad nende
kaubamärkide hulka, mille omanikuks on TomTom N.V. või mõni selle filiaal. Tootele
kehtivad garantiid ja lõppkasutaja litsentsilepingud leiad aadressilt www.tomtom.com/
legal.
© 2012 TomTom N.V., Nyderlandai. TomTom® ir "dviej plaštak " formos logotipas, kaip
ir daugelis kit , priklauso TomTom N.V. arba kuriai nors dukterinei monei. Apie šiam
produktui taikomas garantijas ir licencijavimo galutiniam vartotojui sutartis skaitykite
internete adresu www.tomtom.com/legal.
© 2012 TomTom N.V., N derlande. TomTom® un “divu roci u” logotips ir pre z mes, kas
pieder TomTom N.V. vai k dam t meitas uz mumam. Garantijas un gala lietot ja
l gumus, kas piem rojami šim izstr d jumam, skatiet vietn www.tomtom.com/legal.
© 2012 TomTom N.V., Hollanda. TomTom® ve di er logolar ile birlikte "iki el" logosunun
mülkiyeti, TomTom N.V. veya ba lı irketlerine aittir. Bu ürün için geçerli garanti ve son
kullanıcı lisans sözle meleri için www.tomtom.com/legal sayfasına bakın.
© 2012 TomTom N.V., Holanda. TomTom® e o logotipo "duas mãos" entre outros, são
marcas comerciais de propriedade da TomTom N.V. ou de uma de suas subsidiárias.
Consulte www.tomtom.com/legal para obter garantias e contratos de licença de usuário
final que se aplicam a este produto.
Ordnance Survery © Crown Copyright License number 100026920.
Data Source © 2012 TomTom
All rights reserved.
Data Source
Whereis® map data is © 2012 Telstra® Corporation Limited and its licensors, Whereis®
is a registered trademark of Telstra® Corporation Limited, used under license.
114
SoundClear™ acoustic echo cancellation software © Acoustic Technologies Inc.
Text to Speech technology, © 2012 Loquendo TTS. All rights reserved. Loquendo is a
registered trademark. www.loquendo.com
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Supply of this product does not convey a license nor imply any right to distribute content
created with this product in revenue-generating broadcast systems (terrestrial, satellite,
cable and/or other distribution channels), streaming applications (via Internet, intranets
and/or other networks), other content distribution systems (pay-audio or audio-ondemand applications and the like) or on physical media (compact discs, digital versatile
discs, semiconductor chips, hard drives, memory cards and the like). An independent
license for such use is required. For details, please visit mp3licensing.com
Some images are taken from NASA’s Earth Observatory.
The purpose of NASA’s Earth Observatory is to provide a freely-accessible publication on
the Internet where the public can obtain new satellite imagery and scientific information
about our home planet.
The focus is on Earth’s climate and environmental change: earthobservatory.nasa.gov/
The software included in this product contains copyrighted software that is licensed
under the GPL. A copy of that license can be viewed in the License section. You can obtain
the complete corresponding source code from us for a period of three years after our last
shipment of this product. For more information, visit tomtom.com/gpl or to call your local
TomTom customer support team, visit tomtom.com/support and upon your request we
will send you a CD with the corresponding source code.
Linotype, Frutiger and Univers are trademarks of Linotype GmbH registered in the U.S.
Patent and Trademark Office and may be registered in certain other jurisdictions.
MHei is a trademark of The Monotype Corporation and may be registered in certain
jurisdictions.
115
">