advertisement
RX-V465
AV Receiver
A
OWNER’S MANUAL
Caution: Read this before operating your unit.
1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.
2 Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least
30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit.
3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.
4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.
5 Avoid installing this unit where foreign objects may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place:
– Other components, as they may cause damage and/or discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit.
6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.
7 Do not plug in this unit to a wall outlet until all connections are complete.
8 Do not operate this unit upside-down. It may overheat, possibly causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cable.
11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.
13 To prevent damage by lightning, keep the power cord and outdoor antennas disconnected from a wall outlet or the unit during a lightning storm.
14 Do not attempt to modify or fix this unit. Contact qualified
Yamaha service personnel when any service is needed. The cabinet should never be opened for any reasons.
15 When not planning to use this unit for long periods of time
(i.e. vacation), disconnect the AC power plug from the wall outlet.
16 Install this unit near the AC outlet and where the AC power plug can be reached easily.
17 Be sure to read the “Troubleshooting” section on common operating errors before concluding that this unit is faulty.
18 Before moving this unit, press A STANDBY/ON to set this unit in the standby mode, and disconnect the AC power plug from the wall outlet.
19 VOLTAGE SELECTOR (Asia and General models only)
The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC wall outlet. Voltages are:
.......AC 110/120/220/230–240 V, 50/60 Hz (General model)
.......................... AC 220/230–240 V, 50/60 Hz (Asia model)
20 The batteries shall not be exposed to excessive heat such as sunshine, fire or like.
21 Excessive sound pressure from earphones and headphones can cause hearing loss.
22 When replacing the batteries, be sure to use batteries of the same type. Danger of explosion may happen if batteries are incorrectly replaced.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by A STANDBY/ON . In this state, this unit is designed to consume a very small quantity of power.
Caution-i
En
L
INTRODUCTION
Features.................................................................... 2
About this manual................................................... 3
Supplied accessories................................................ 3
Part names and functions....................................... 4
Front panel ................................................................. 4
Rear panel .................................................................. 5
Front panel display..................................................... 6
Remote control........................................................... 7
Quick start guide..................................................... 8
PREPARATION
Preparing remote control ....................................... 9
Installing batteries in the remote control ................... 9
Using the remote control............................................ 9
Connections ........................................................... 10
Placing speakers....................................................... 10
Connecting speakers ................................................ 11
Information on jacks and cable plugs ...................... 13
Connecting a TV monitor or projector .................... 14
Connecting other components ................................. 15
Connecting a Yamaha iPod universal dock or
Bluetooth™ wireless audio receiver.................... 16
Using the VIDEO AUX jacks on the front panel .... 16
Connecting the FM and AM antennas ..................... 17
Connecting the power cable..................................... 17
Turning this unit on and off ..................................... 17
Using Auto Setup..................................................... 18
Contents
Using Bluetooth™ components ........................... 32
Playback of the Bluetooth™ component ................. 32
ADVANCED OPERATION
Setting the option menu for each input source
(OPTION menu) ............................................... 33
OPTION menu items ............................................... 33
Editing surround decoders/sound field programs
............................................................................ 36
Selecting a decoder used with a sound field program
............................................................................. 36
Setting sound field parameters................................. 36
Sound field parameters ............................................ 36
Operating various settings for this unit
(Setup menu) ..................................................... 38
Basic operation of the setup menu ........................... 39
Speaker Setup .......................................................... 39
Sound Setup ............................................................. 41
Function Setup ......................................................... 42
DSP Parameter ......................................................... 43
Memory Guard......................................................... 43
Setting remote control codes.................................... 44
Resetting all remote control codes........................... 44
Advanced setup..................................................... 45
BASIC OPERATION
Playback................................................................. 21
Basic procedure........................................................ 21
Using the SCENE function ...................................... 21
Muting audio output temporarily (MUTE) .............. 22
Adjusting high/low frequency sound
(tone control) ....................................................... 22
Enjoying pure hi-fi sound ........................................ 22
Using the sleep timer ............................................... 22
Using your headphones............................................ 22
Displaying input signal information ........................ 23
Changing information on the front panel display .... 23
Enjoy the sound field programs .......................... 24
Selecting sound field programs................................ 24
Enjoy sound field programs with headphones
(SILENT CINEMA™) ........................................ 27
FM/AM tuning ...................................................... 28
Using iPod™ .......................................................... 30
Controlling iPod™................................................... 30
APPENDIX
Troubleshooting .................................................... 46
General..................................................................... 46
HDMI....................................................................... 48
Tuner (FM/AM) ....................................................... 49
Bluetooth™.............................................................. 51
Auto Setup (YPAO)................................................. 51
Glossary ................................................................. 53
Sound field program information ....................... 55
Information on HDMI™...................................... 55
Additional information ........................................ 56
About the HDMI control function ........................... 56
Using the HDMI control function............................ 56
Specifications......................................................... 57
Index ...................................................................... 58
(at the end of this manual)
List of remote control codes...................................i
1
En
INTRODUCTION
â– Built-in 5-channel power amplifier
• Minimum RMS output power (1 kHz, 0.9% THD, 6
Ω
)
• FRONT L/R: 105 W + 105 W
• CENTER: 105 W
• SURROUND L/R: 105 W + 105 W
â– Speaker/Preout outputs
• Speaker jacks (5-channel), preout output jacks
(surround back L/R, subwoofer)
â– Input/Output terminals
Input terminals
• HDMI input x 4
• Audio/Visual input
[Audio] Digital input (coaxial) x 2, digital input
(optical) x 2, analog input x 2
[Video] Component video x 2, composite video x 4
• Audio input (analog) x 2
• Dock input x 1
• V-AUX input
[Audio] Analog x 1, stereo mini jack x 1
[Video] Composite video x 1
Output terminals
• Monitor output
[Audio/Video] HDMI x 1
[Video] Component video x 1, Composite video x 1
• Audio/Visual output
[Audio] Analog x 1
[Video] Composite video x 1
• Audio output
Analog x 1
â– Proprietary Yamaha technology for the creation of sound fields
• CINEMA DSP
• Compressed Music Enhancer mode
• Virtual CINEMA DSP
• SILENT CINEMA
â– Digital audio decoders
• Dolby TrueHD, Dolby Digital Plus decoder
• DTS-HD Master Audio, DTS-HD High Resolution
Audio, DTS Express
• Dolby Digital/Dolby Digital EX decoder
• DTS, DTS 96/24 decoder, DTS-ES Matrix 6.1,
DTS-ES Discrete 6.1
• Dolby Pro Logic/Dolby Pro Logic II/Dolby Pro Logic
IIx decoder
• DTS NEO:6 decoder
• DSD
â– Sophisticated FM/AM tuner
• 40-station random and direct preset tuning
• Automatic preset tuning
Features
â– HDMI™
(High-Definition Multimedia Interface)
• HDMI interface for standard, enhanced or highdefinition video as well as multi-channel digital audio.
– Automatic audio and video synchronization (lip sync) information capability
– Deep Color video signal (30/36 bit) transmission capability
– “x.v.Color” video signal transmission capability
– High refresh rate and high resolution video signals capability
– High definition digital audio format signals capability
â– DOCK terminal
• DOCK terminal to connect a Yamaha iPod universal dock (such as YDS-11, sold separately) or Bluetooth wireless audio receiver (such as YBA-10, sold separately)
â– Automatic speaker setup features
• “YPAO” (Yamaha Parametric Room Acoustic
Optimizer) for automatically optimizing speaker outputs suitable for listening environments.
â– Other features
• 192-kHz/24-bit D/A converter
• Direct mode for pure hi-fi sound for all sources
• Adaptive dynamic range controlling capability
• Scene function that allows you to change input sources and sound field programs with one key.
• Sleep timer
2
En
About this manual
• y indicates a tip for your operation.
• Some operations can be performed by using either the keys on the front panel or the ones on the remote control. In case the key names differ between the front panel and the remote control, the key name on the remote control is given in parentheses.
• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and product, the product has priority.
• “ A STANDBY/ON ” or “ g HDMI 1 ” (example) indicates the name of the parts on the front panel or the remote control. Refer to the attached sheet
or “Part names and functions” on page 4 for the information about each position of the parts.
• ☞ indicates the page describing the related information.
Bluetooth™
Bluetooth is a registered trademark of Bluetooth SIG and is used by
Yamaha in accordance with a license agreement.
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic and the double-D symbol are trademarks of Dolby
Laboratories.
“HDMI,” the “HDMI” logo and “High-Definition Multimedia
Interface” are trademarks, or registered trademarks of HDMI
Licensing LLC.
x.v.Color™
“x.v.Color” is a trademark of Sony Corporation.
Manufactured under license under U.S. Patent No’s:
5,451,942;5,956,674;5,974,380;5,978,762;6,226,616;6,487,535 & other U.S. and worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-
HD Master Audio are trademark of DTS, Inc. © 1996-2007 DTS, Inc.
All Rights Reserved.
iPod™
“iPod” is a trademark of Apple Inc., registered in the U.S. and other countries.
“SILENT CINEMA” is a trademark of Yamaha Corporation.
Supplied accessories
Check that you received all of the following parts.
• Remote control
• Batteries (2) (AAA, R03, UM-4)
• Optimizer microphone
• AM loop antenna
• Indoor FM antenna
3
En
Part names and functions
Front panel
U T D E F G H
STANDBY
/ON
PHONES
SILENT CINEMA
VOLUME
HDMI THROUGH
INFO MEMORY l
PRESET h
FM AM l
TUNING h
BD/DVD TV
TONE CONTROL PROGRAM l h
STRAIGHT
EFFECT
SCENE
CD RADIO
DIRECT l
INPUT h
OPTIMIZER MIC
VIDEO AUX
VIDEO AUDIO PORTABLE
P
A B C J K
A STANDBY/ON
Switches this unit between standby and on (see page 17).
B PHONES jack
For plugging headphones (see page 22).
C INFO
Changes information display screens on the front panel display
D MEMORY
Registers FM/AM stations as preset stations (see page 29).
E PRESET l / h
Selects an FM/AM preset station (see page 29).
F FM
Sets the FM/AM tuner band to FM (see page 28).
G AM
Sets the FM/AM tuner band to AM (see page 28).
H TUNING l / h
Changes FM/AM tuner frequencies (see page 28).
I SCENE
Switches between linked sets of input sources and sound field
J TONE CONTROL
Adjusts high-frequency/low-frequency output of speakers/
K PROGRAM l / h
Changes sound field programs (see page 24).
L STRAIGHT
Changes a sound field program to straight decoding mode (see page 27).
L M N O I Q R S
M DIRECT
Changes a sound field program to direct mode (see page 22).
N INPUT l / h
Selects an input source (see page 21).
O OPTIMIZER MIC jack
For connecting the supplied optimizer microphone and adjusting
output characteristics of speakers (see page 18).
P VOLUME control
Controls the volume of this unit (see page 21).
Q VIDEO (VIDEO AUX) jack
For connecting the video output cable of a camcorder or game
R AUDIO L/R (VIDEO AUX) jack
For connecting the audio output cable of a camcorder or game
S PORTABLE (VIDEO AUX) jack
For connecting the audio output cable of a portable music player
T Front panel display
Displays information on this unit (see page 6).
U HDMI THROUGH
Lights up during pass-through output of an HDMI signal input
to this unit while this unit is on standby (see page 42).
4
En
Rear panel
a c b d
P
B
Y
DOCK
COMPONENT
VIDEO
P
R
VIDEO
HDMI OUT
ANTENNA
UNBAL.
(BD/DVD)
HDMI 1
COMPONENT
VIDEO
P
R
HDMI 2
FM GND AM
P
B
VIDEO
Y
MONITOR OUT
HDMI 3 HDMI 4
FRONT
SPEAKERS
CENTER SURROUND
OPTICAL
( TV )
AV 1
COAXIAL
AV 2
COAXIAL
(CD)
AV 3
OPTICAL
AV 4 AV 5 AV 6
AV
OUT AUDIO1 AUDIO2
AUDIO
OUT
SURROUND BACK
PRE OUT
SUBWOOFER e f g h a DOCK terminal
For connecting an optional Yamaha iPod universal dock (YDS-
11) or Bluetooth wireless audio receiver (YBA-10) (see page 16).
b HDMI OUT/HDMI 1-4
For connecting an HDMI-compatible video monitor or external
components for HDMI inputs 1-4 (see page 15).
c ANTENNA jack
For connecting supplied FM and AM antennas (see page 17).
d SPEAKERS terminal
For connecting front right and left, center and surround speakers
e AV 1-6
For connecting external components for audio/visual inputs 1-6
f AV OUT
Outputs audio/visual signals from a selected analog input source
to an external component (see page 16).
g AUDIO 1/2
For connecting external components for audio inputs 1-2 (see page 16).
h MONITOR OUT
Outputs visual signals from this unit to a video monitor, such as
i AUDIO OUT
Outputs audio signals from a selected analog input source to an
external component (see page 16).
j PRE OUT
Outputs the surround back L/R channel signals and subwoofer channel signals. For connecting an external amplifier or
k Power Cable
For connecting this cable to an AC wall outlet (see page 17).
l VOLTAGE SELECTOR (Asia and General models only)
Select the switch position according to your local voltage (see page 17).
i j
Part names and functions l k
5
En
Part names and functions
Front panel display
a g h a HDMI indicator
Lights up during normal communication when HDMI is selected as an input source.
b CINEMA DSP indicator
Lights up when a sound field program that uses CINEMA DSP is selected.
c Tuner indicator
Lights up while receiving a radio broadcast signal from an FM/
d SLEEP indicator
Lights up when the sleep timer is activated (see page 22).
e VOLUME indicator
Displays volume levels.
f MUTE indicator
Flashes when audio is muted.
g Cursor indicators
Light up if corresponding cursors on the remote control are available for operations.
h Multi information display
Displays menu items and settings for the current operation.
i Speaker indicators
Indicate speaker terminals or the PRE OUT jack from which signals are currently output.
Subwoofer
Front L
Surround L
Surround back L
L
SL
SW
C
R
SR
SBL SB SBR
Center
Front R
Surround R
Surround back R
Surround back b c
STEREO
TUNED d f e
SLEEP VOL.
MUTE
L
SL
SW
C
R
SR
SBL SB SBR g i
6
En
Part names and functions
Remote control
a d g h i j k l n r s t
POWER
SOURCE
1
1
5
TRANSMIT CODE SET
POWER
SLEEP
2
HDMI
3
AV
2
6
4
3 4
1
AUDIO
2
V-AUX [ A ]
TUNER
[ B ] DOCK
FM AM
PRESET TUNIN G
INFO MEMORY
MOVIE MUSIC
ENHANCER SUR. DECODE
STEREO
STRAI G HT DIRECT
BD
DVD
SETUP
SCENE
TV CD
OPTION
RADIO
RETURN
TOP
MENU
REC
ENTER
DISPLAY
VOLUME
MENU MUTE
1
5
9
INPUT
MUTE
2 3
6
0
7
10
TV
TV VOL TV CH
POWER
4
8
ENT b c e f m o q p a Remote control signal transmitter
Transmits infrared signals.
b TRANSMIT
Lights up when a signal is output from the remote control.
c CODE SET
Sets remote control codes for external component operations
d SOURCE POWER
Switches an external component on and off.
e SLEEP
Switches the sleep timer operations (see page 22).
f POWER
Switches this unit on and standby.
g Input selection keys
HDMI 1-4
AV 1-6
AUDIO 1/2
V-AUX
[A]/[B]
DOCK
TUNER
Selects HDMI inputs 1 through 4.
Selects AV inputs 1 through 6.
Selects AUDIO inputs 1 and 2.
Selects the V-AUX jack on the front panel of this unit.
To control external components using the r External component operation keys separately from
operations of this unit (see page 44).
Selects a Yamaha iPod universal dock/
Bluetooth wireless audio receiver connected to the DOCK terminal.
Selects the FM/AM tuner.
h Tuner keys
FM
AM
MEMORY
PRESET k / n
TUNING k / n
Switches a band between FM and AM.
Presets radio stations.
Selects a preset station.
Changes tuning frequencies.
i INFO
Changes the information shown on the front panel display (see page 23).
j Sound selection keys
Selects sound field programs (see pages 22 and 24).
k SCENE
Switches between linked sets of input sources and sound field
l SETUP
Displays the setup menu (see page 39).
m OPTION
Displays the option menu (see page 33).
n Cursors k / n / l / h /ENTER/RETURN
Cursors k / n / l / h Select menu items displayed on the front panel display or change
ENTER
RETURN settings.
Confirms a selected item.
Returns to the previous screen or ends the menu screen.
o VOLUME +/–
Adjust the volume of this unit (see page 21).
p DISPLAY
Changes the operation mode of the iPod connected to the
Yamaha iPod universal dock (see page 30).
q MUTE
Turns the mute function of the sound output on and off (see page 22).
r External component operation keys
Operate recording, playback etc. of external components (see page 44).
s Numeric keys
Enter numbers.
t TV control keys
Operate a monitor such as a TV or projector.
7
En
Quick start guide
When you use this product for the first time, perform setup following the steps below. See the related pages for details on operations and settings.
Step 1: Prepare items for setup
Prepare speakers, DVD player, cables, and other items necessary for setup.
For example, prepare the following items for setting up a
5.1-channel sound system.
Step 2: Set up your speakers
Place your speakers in the room and connect them to this unit.
•
•
Placing speakers
Connecting speakers
Front right speaker
Video monitor
Front left speaker
Center speaker
Subwoofer
Components
(such as DVD player)
Surround right speaker
Surround left speaker y
• This unit has a YPAO (Yamaha Parametric Room Acoustic Optimizer) that automatically optimizes this unit based on room acoustic characteristics (audio characteristics of the speakers, speaker positions, and room acoustics, etc.).
You can enjoy good balanced sound without special knowledge by using
the YPAO technology (see page 18).
Step 3: Connect your components
Connect your TV, DVD player, or other components.
•
•
Connecting a TV monitor or projector
Connecting other components
• Connecting a Yamaha iPod universal dock or
•
Bluetooth wireless audio receiver
Connecting the FM and AM antennas
Step 4: Turn on the power
Connect the power cable and turn on this unit.
Speakers
Requirements
Front speaker
Center speaker
Surround speaker
Active subwoofer
Speaker cable
Subwoofer cable
Reproduction component such as DVD player
Video monitor such as TV
Video cable or HDMI cable
Audio cable
5
1
2
1 qty.
2
1
2
2
1
1
y
• This unit supports the SCENE function that changes the input source and sound field program at one time. Four scenes are preset for different purposes for Blu-ray disc, DVD and CD, and you can select from a scene
from those just by pressing a remote control key. See page 21 for details.
y
• Prepare two speakers (for front). The priority of the requirement of other speakers is as follows:
1 Two surround speakers
2 One center speaker
• For surround back speakers, prepare speakers with a another amplifier connected.
• If your video monitor is a CRT, we recommend that you use magnetically shielded speakers.
• Connecting the power cable
• Turning this unit on and off
Step 5: Select the input source and start playback
Select the component connected in the step 3 as an input source and start playback.
•
•
Basic procedure
Selecting sound field programs
8
En
PREPARATION
1 3
Preparing remote control
Installing batteries in the remote control
Using the remote control
The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation.
Remote control sensor window
2
30 30 within 6 m (20 ft)
1
Take off the battery compartment cover.
2
Insert the two supplied batteries (AAA, R03,
UM-4) according to the polarity markings (+ and –) on the inside of the battery compartment.
3
Snap the battery compartment cover back into place.
Notes
• Change all batteries if you notice the following conditions:
– the operation range of the remote control narrows
– the transmit indicator does not flash or is dim
• Do not use old batteries together with new ones.
This may shorten the life of the new batteries or cause old batteries to leak.
• Do not use different types of batteries (such as alkaline and manganese batteries) together. Specification of batteries may be different even though they look the same.
• If you find leaking batteries, discard the batteries immediately, taking care not to touch the leaked material. If the leaked material comes into contact with your skin or gets into your eyes or mouth, rinse it away immediately and consult a doctor. Clean the battery compartment thoroughly before installing new batteries.
• Dispose of the old batteries correctly in accordance with your local regulations.
• If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. In such a case, install new batteries and set the remote control code.
Notes
• Do not spill water or other liquids on the remote control.
• Do not drop the remote control.
• Do not leave or store the remote control in the following conditions:
– places of high humidity, such as near a bath
– places of high temperatures, such as near a heater or stove
– places of extremely low temperatures
– dusty places y
• You can operate external components with this remote control by setting
the remote control code. See page 44 for details.
9
En
Connections
Placing speakers
This unit supports up to 7.1-channel surround. We recommended the following speaker layout in order to obtain the optimum surround effect.
7.1-channel speaker layout
FL
SW
SL
SL
SL
SL
FL
FL
30Ëš
80Ëš
60Ëš
SBL
30 cm (12 in) or more
6.1-channel speaker layout
SW
SL
SL
30Ëš
5.1-channel speaker layout
SW
80Ëš
60Ëš
30Ëš
80Ëš
60Ëš
C
C
SB
C
SBR
FR
FR
SW
FR
SR
SR
SW
SR
SR
SW
SR
SR
Speaker channels
â– Front left and right speakers (FL and FR)
The front speakers are used for the front channel sounds
(stereo sound) and effect sounds. Place these speakers at an equal distance from the ideal listening position. When using a screen, the appropriate top positions of the speakers are about 1/4 of the screen from the bottom.
â– Center speaker (C)
The center speaker is for the center channel sounds
(dialog, vocals, etc.). Place it halfway between the left and right speakers. When using a TV, place the speaker just above or just under the center of the TV with the front surfaces of the TV and the speaker aligned. When using a screen, place it just under the center of the screen.
â–
Surround left and right speakers (SL and SR)
The surround speakers are used for effect and surround sounds.
Place them at the rear left and rear right facing the listening position.
To obtain a natural sound flow in the 5.1-channel speaker layout, place them slightly further back than in the 7.1channel speaker layout.
â–
Surround back left and right speakers (SBL and SBR) / Surround back speaker (SB)
The surround back left and right speakers are used for rear effect sounds. When using the surround back speakers, connect an external amplifier to the SURROUND BACK jacks of the PRE OUT terminals. Place them at the rear of the room facing the listening position at least 30 cm away from each other, ideally at the same distance as that between the front left and right speakers.
In the 6.1-channel speaker layout, surround back left and right channel sound signals are mixed down and output from the single surround back speaker.
In the 5.1-channel speaker layout, surround back left and right channel sound signals are output from the surround left and right speakers.
â– Subwoofer (SW)
The subwoofer speaker is used for bass sounds and lowfrequency effect (LFE) sounds included in Dolby Digital and DTS signals. Use a subwoofer with a built-in amplifier, such as the Yamaha Active Servo Processing
Subwoofer System. Place it exterior to the front left and right speakers facing slightly inward to reduce reflections from a wall.
10
En
Connections
Connecting speakers
When you connect speakers, connect them to the respective terminals as follows, according to your speaker layout.
b a c
HDMI 4
FRONT
SPEAKERS
CENTER SURROUND
Connecting the surround back speakers
Connecting an external amplifier to the SURROUND
BACK L/R jacks of the PRE OUT terminals allows you to create the maximum of 7.1-channel surround system with a surround back channel.
For a 6.1-channel system, connect the external amplifier to the SURROUND BACK L jack of the PRE OUT terminals.
For a 7.1-channel system, connect it to the SURROUND
BACK L/R jacks.
Surround Back L/R speakers
External Amplifier
AUDIO
OUT
SURROUND BACK
PRE OUT
SUBWOOFER
â–
5.1-channel
Speakers a Front speaker L b Front speaker R c Center speaker d Surround speaker L e Surround speaker R f Subwoofer e d f
Jacks on this unit
FRONT (L)
FRONT (R)
CENTER
SURROUND (L)
SURROUND (R)
SUBWOOFER
SURROUND BACK L
(white)
SURRUND BACK R
(red)
SURROUND BACK
PRE OUT
SUBWOOFER
You can adjust the surround back speaker volume with a volume control of the external amplifier. To obtain the balanced sound during playback, set the speaker output characteristics in advance using the Yamaha Parametric
Room Acoustic Optimize (YPAO, see page 18) or
“Speaker Setup” of the setup menu (see page 39).
11
En
Connections
Connecting the speaker cable
Caution
• A speaker cable is a pair of insulated cables running side by side in general. One of the cables is colored differently or striped to indicate a polarity. Connect one end of the colored/striped cable to the “+” (red) terminal of this unit and the other end to that of your speaker, and connect one end of the other cable to the “–” (black) terminal of this unit and the other end to that of your speaker.
• Before connecting the speakers, be sure to disconnect the power cable.
• Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or speakers. If the circuit shorts out, “CHECK SP WIRES!” appears on the front panel display when this unit is turned on.
• Use magnetically shielded speakers. If images on the monitor are still distorted even when you use the magnetically shielded speakers, place the speakers away from the monitor.
• Use speakers with an impedance of 6-ohm or larger. Set speaker impedance in “ADVANCED SETUP” before
connecting the speakers (see page 45).
â– Connecting to the FRONT terminals
1
Remove approximately 10 mm (0.4 in) of insulation from the end of each speaker cable and then twist bare wires of the cable together so that they will not cause a short circuits.
â– Connecting to the CENTER and SURROUND terminals
1
Press down the tab and insert the bare end of the speaker cable into the hole in the terminal.
10 mm (0.4 in)
Red: positive (+)
Black: negative (–)
2
Loosen the knob, insert the twisted bare wires into the hole, and then tighten the knob.
1
3
2
Red: positive (+)
Black: negative (–)
Connecting the banana plug (Except U.K.,
Europe, Asia and Korea models)
Tighten the knob, and then insert the banana plug into the end of the terminal.
Banana plug
2
Release the tab to secure the wire.
12
En
Connections
Information on jacks and cable plugs
This unit has the following input and output jacks. Use jacks and cables appropriate for components that you are connecting.
â– Audio jacks â– Video/audio jacks
Jack and cables Description Jack and cables Description
AUDIO jacks
(white)
L
To transmit conventional analog left and right audio signals. Use stereo pin cables. Connect red plugs to red jacks (R) and white plugs to white jacks (L).
HDMI jacks
HDMI
HDMI
To transmit digital video and digital audio signals. Use HDMI cables.
R
AUDIO
(red)
COAXIAL jacks
(orange)
To transmit coaxial digital audio signals. Use pin cables for digital audio signals.
y
• We recommend that you use a commercially available 19-pin HDMI cable no longer than 5 meters (16 feet) with the HDMI logo printed on it.
•
You can check the potential problem about the HDMI connection (see page 23).
•
You can check error information on HDMI connections (see page 23).
C
COAXIAL
OPTICAL jacks
OPTICAL
O
To transmit optical digital audio signals. Use optical fiber cables for optical digital audio signals.
A video signal input to this unit is output from the output terminals in MONITOR OUT for the same kind of signal as the input signal.
For example, if a VCR with a composite output signal and a DVD player with a COMPONENT VIDEO output signal are connected, connect both VIDEO jack and COMPONENT VIDEO jack in MONITOR OUT to the video monitor.
Input Output â– Video jacks
Jack and cables
VIDEO jacks
VIDEO
V
(yellow)
Description
To transmit conventional composite video signals. Use video pin cables.
P
R
HDMI
COMPONENT VIDEO
P
B
VIDEO
Y
HDMI
P
R
COMPONENT VIDEO
VIDEO
P
B
Y
COMPONENT VIDEO jacks
COMPONENT
VIDEO
P R
(red)
P
R
P
B P
B
(blue)
Y
(green)
Y
To transmit component video signals that include luminance (Y), chrominance blue (P B ) and chrominance red (P
R
) components.
Use component video cables.
13
En
Connections
Connecting a TV monitor or projector
Connect a video monitor such as a TV or projector to an output terminal of this unit. You can select one of the following three types according to the input signal format supported by the video monitor.
Note
• When you connect this unit to the video monitor, make sure that this unit is on standby.
a
TV, or projector
HDMI c b
Y P
B
P
R
V
Outputting sound of a TV from this unit
To output sound of a TV from this unit, make connection between the AV input 1-6 and an audio output terminal.
If the TV supports an optical digital output, we recommend that you use the AV input 1. Connecting to the
AV input 1 allows you to switch an input source to the AV input 1 with just a single key operation using the SCENE
TV, or projector
Digital output
(optical)
HDMI OUT
ANTENNA
UNBAL.
(BD/DVD)
HDMI 1
COMPONENT
VIDEO
P
R
HDMI 2
FM GND AM
P
B
VIDEO
Y
MONITOR OUT
HD
â– To connect an HDMI video monitor
Jacks on this unit Jacks on components a HDMI input HDMI OUT y
• This unit supports the HDMI control function. By connecting a TV that supports the HDMI control, operations of this unit can be controlled with
the remote control of the TV. For details, see page 44.
â– To connect component video monitor
Note
• Only video signals input from this unit via the component input terminal are output from the component output terminal.
Jacks on this unit Jacks on components b Component video output MONITOR OUT
(COMPONENT VIDEO)
â– To connect composite video monitor
Note
• Only video signals input from this unit via the composite video input terminal are output from the composite video output terminal.
Jacks on this unit Jacks on components c Video input (composite) MONITOR OUT (VIDEO)
P
R
P
B
Y
VIDEO
UNBAL.
FM GND AM
O
OPTICAL
( TV )
COAXIAL
AV 2
COAXIAL
(CD)
AV 3
OPTICAL
AV 4 AV 5 AV 6
AV
OUT AUDIO1
14
En
Connections
Connecting other components
This unit has input and output terminals for respective input and output sources. You can reproduce sound and movies from input sources selected with the front panel display or remote control.
Note
• When you connect this unit to the external components, make sure that this unit is on standby.
Audio / video input (AV 1-6) Audio / video output (AV OUT)
P
B
Y
COMPONENT
VIDEO
P
R
DOCK
VIDEO
HDMI OUT
ANTENNA
UNBAL.
(BD/DVD)
HDMI 1
COMPONENT
VIDEO
P
R
HDMI 2
FM GND AM
P
B
VIDEO
Y
HDMI 3 HDMI 4
FRONT
CE
HDMI input
(HDMI 1-4)
Audio output
(AUDIO OUT)
OPTICAL
( TV )
AV 1
COAXIAL
AV 2
COAXIAL
(CD)
AV 3
OPTICAL
AV 4 AV 5 AV 6
AV
OUT AUDIO1 AUDIO2
AUDIO
OUT
â– Audio and video player / Set-top box
Output jacks on the connected external component
External components
Signals Output jacks
External component with HDMI output
Audio/Video HDMI output
Audio input (AUDIO 1-2)
External component with component video output
Audio
Video
Audio
Video
External component with composite video output
Audio
Video
Audio
Video
Audio
Video
Audio
Video
Optical digital output
Component video output
Coaxial digital output
Component video output
Coaxial digital output
Composite output
Optical digital output
Composite output
Analog audio output
Composite output
Analog audio output
Composite output
Input sources/jacks of this unit
HDMI 1 (BD/DVD) HDMI 1
HDMI 2 HDMI 2
HDMI 3
HDMI 4
HDMI 3
HDMI 4
AV 1 (TV)
AV 2
OPTICAL
COMPONENT VIDEO
COAXIAL
COMPONENT VIDEO
AV 3 (CD)
AV 4
AV 5
AV 6
COAXIAL
VIDEO
OPTICAL
VIDEO
AUDIO
VIDEO
AUDIO
VIDEO y
• Input sources in parentheses are recommended to connect to the respective jacks. If your Yamaha component has the Remote in/out terminal, you can
•
15
En
Connections
â– Audio player
Output jacks on the connected external component
External components Output jacks
External component with optical digital output
Optical digital output
Input sources/jacks of this unit
External component with coaxial digital output
Coaxial digital output
AV 1 (TV)
AV 4
AV 2
AV 3 (CD)
OPTICAL
OPTICAL
COAXIAL
COAXIAL
External component with analog audio output
Analog audio output AV 5
AV 6
AUDIO 1
AUDIO
AUDIO
AUDIO
AUDIO 2 y
• We recommend connecting the coaxial digital output terminal of a CD player to the AV3 jack.
AUDIO
About audio/video output terminals
Among the analog audio and analog video signals input to this unit via input terminals, the audio/video signals of the selected input sources are output from the AV OUT jack and AUDIO OUT jack. An HDMI input signal,
COMPONENT VIDEO input signal or digital audio input signal cannot be output.
When using the AV OUT jack: connect an external component to the composite or analog audio terminal.
When using the AUDIO OUT jack: connect an external component to the analog audio terminal.
Connecting a Yamaha iPod universal dock or Bluetooth™ wireless audio receiver
This unit has the DOCK terminal, to which you can connect a Yamaha iPod universal dock (YDS-11, sold separately) or a Bluetooth wireless audio receiver (YBA-
10, sold separately). You can play an iPod or a Bluetooth component with this unit by connecting it to the DOCK terminal.
Use a dedicated cable for connection between the dock/ receiver and this unit.
Using the VIDEO AUX jacks on the front panel
Use the VIDEO AUX jacks on the front panel to connect a game console or a video camera to this unit. Be sure to turn down the volume of this unit and other components before making connections.
VOLUME l
PRESET h
BD/DVD
FM
TV
SCENE
CD
OGRAM h
STRAIGHT
EFFECT
AM l
RADIO
DIRECT l
INPUT h
OPTIMIZER MIC
TUNING h
VIDEO AUX
VIDEO AUDIO PORTABLE
P
B
Y
DOCK
COMPONENT
VIDEO
P
R
VIDEO
HDMI OUT
ANTENNA
UNBAL.
FM GND
VIDEO L AUDIO R PORTABLE
V L R
Yamaha iPod universal dock/Bluetooth wireless audio receiver
Game console/Camcorder Music player
Note
• When external components are connected both the PORTABLE jack and
AUDIO jack, sound input from the PORTABLE jack is output.
16
En
Connections
Connecting the FM and AM antennas
An indoor FM antenna and an AM loop antenna are supplied with this unit. Connect these antennas properly to the respective jacks.
Indoor FM antenna
DOCK
COMPONENT
VIDEO
P
R
P
B
Y
Outdoor AM antenna
Connect a 5 to 10 m (16 to 33 ft) vinyl-covered wire, and extend it outdoors (use the AM loop antenna together with this antenna).
AM loop antenna
VIDEO
HDMI OUT
ANTENNA
UNBAL.
(BD/DVD)
HDMI 1
COMPONENT
VIDEO
P
R
HDMI 2
FM GND AM
P B
VIDEO
Y
MONITOR OUT
HDMI 3
Ground (GND terminal)
The GND terminal is not for earth grounding.
To reduce noises, connect a ground bar or a vinyl-covered wire with a copper plate at its tip, and place it in the moist ground.
F
Connecting the power cable
VOLTAGE SELECTOR (Asia and General models only)
Caution
The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local voltage BEFORE plugging the power cable into the AC wall outlet.
Improper setting of the VOLTAGE SELECTOR may cause damage to this unit and create a potential fire hazard.
Select the switch position according to your local voltage using a straight slot screwdriver.
VOLTAGE
SELECTOR
230-
240V
Voltage indication y
• The supplied antennas are normally sensitive enough to obtain good reception.
• Position the AM loop antenna away from this unit.
• If you cannot get good reception, we recommend that you use an outdoor antenna. For more details, consult the nearest authorized Yamaha dealer or service center.
• Always use the AM loop antenna even when the outdoor antenna is connected.
Assembling the AM loop antenna
Connecting the AM loop antenna
The wires of the AM loop antenna have no polarity. You can connect either wire to the AM terminal and the other to the GND terminal.
Press and hold Insert Release
[General model]
Voltages are AC 110/120/220/230-240 V, 50/60 Hz.
[Asia model]
Voltages are AC 220/230-240 V, 50/60 Hz.
Connecting the AC power cable
After all connections are complete, plug the AC power cable of this unit into an AC wall outlet.
Turning this unit on and off
1
Press A STANDBY/ON (or f POWER ) to turn on this unit.
2
Press A STANDBY/ON (or f POWER ) again to turn off this unit (standby mode).
y
• The unit needs a few seconds until ready to play back.
• You can also turn on this unit by pressing I SCENE (or k SCENE ).
• This unit consumes a small amount of electricity even in the standby mode. We recommend disconnecting the power cable from the AC wall outlet.
Caution
Do not unplug this unit while it is turned on. Doing so may damage this unit or cause the settings of this unit to be saved incorrectly.
17
En
Optimizing the speaker setting for your listening room (YPAO)
This unit has a Yamaha Parametric Acoustic Optimizer (YPAO). With the YPAO, this unit automatically adjusts the output characteristics of your speakers based on speaker position, speaker performance, and the acoustic characteristics of the room. We recommend that you first adjust the output characteristics with the YPAO when you use this unit.
Notes
• Be advised that it is normal for loud test tones to be output during the “Auto Setup” procedure. Do not allow small children to enter the room during the procedure.
• To achieve the best results, make sure the room is as quiet as possible while the “Auto Setup” procedure is in progress. If there is too much ambient noise, the results may not be satisfactory.
y
•
See page 39 for the “Manual Setup” procedure.
2
Connect the supplied optimizer microphone to the OPTIMIZER MIC jack on the front panel.
UT h
OPTIMIZER MIC
VIDEO AUX
VIDEO AUDIO PORTABLE
Optimizer microphone
Using Auto Setup
1
Check the following points.
Before starting the automatic setup, check the following.
• All speakers and subwoofer are connected properly.
• Headphones are disconnected from this unit.
• If the surround back speakers are connected to this unit via an external amplifier, turn on the external amplifier and adjust the volume to the proper level.
• The connected subwoofer is turned on and the volume level is set to about half way (or slightly less).
• The crossover frequency controls of the connected subwoofer are set to the maximum.
CROSSOVER/
HIGH CUT VOLUME
“MIC ON. YPAO START” appears on the front panel display. y
•
You can bring up the “Auto Setup” from the setup menu (see page 39).
3
Place the optimizer microphone at your normal listening position on a flat level surface with the omni-directional microphone heading upward.
Optimizer microphone
MIN MAX
Subwoofer
MIN MAX
Note
• If the volume of the external amplifier is not set at the proper level while the surround speakers being connected, the surround back speakers may not be recognized by the YPAO or a warning message may appear.
y
• It is recommended that you use a tripod or something similar to fix the optimizer microphone at the same height as your ears would be when seated in your listening position. You can fix the optimizer microphone to the tripod with the attaching screw of the tripod.
1 8
En
Optimizing the speaker setting for your listening room (YPAO)
4
To select a sound character for adjustment, press n Cursor k to select “EQ” and then press n Cursor l / h .
If this unit does not work when you press n Cursor , press l SETUP once and then operate this unit.
Notes
• When “E-xx” (xx indicates the number) appears during Auto
Setup, it means that measurement is canceled due to an error. For
details, see “When an error message is displayed during measurement” (page 20).
• When an error occurs during measurement, “W-xx” (xx indicates
6
Press n ENTER to confirm the settings.
The speaker characteristics are adjusted according to measurement results.
EQ
;;;;;
Natural
This unit has a parametric equalizer that adjusts the output levels for each frequency range. The equalizer is adjusted to produce a cohesive sound field based on automatically measured speaker characteristics.
In “EQ,” you can select the following parametric equalizer characteristics suitable for the desired sound characteristics.
Natural
This adjusts all speakers to achieve natural sound.
Select this if sounds in the high frequency range seem too strong when “EQ” is set to “Flat.”
Flat
This adjusts each speaker to obtain the same characteristics. Select this if your speakers have similar qualities.
Front
This adjusts each speaker to obtain the same characteristics as the front left and right speakers.
Select this if your front left and right speakers have significantly better qualities than the other speakers.
5
Press n Cursor n to select “Start” and then press n ENTER to start the setup procedure.
A countdown starts and a measurement starts in 10 seconds. A loud test tone is output during measurement.
Notes
• During the automatic setup procedure, do not perform any operation on this unit.
• Press n Cursor k to cancel the automatic setup procedure.
Measurement takes about 3 minutes. To obtain precise results, stay where you will not disturb the measurement, such as to the side of or behind the speakers or outside the room.
>SetCancel
7
To cancel the operation, press n Cursor l / h to select “Cancel” and press n ENTER .
When “Disconnect MIC” appears, remove the optimizer microphone. Auto Setup is complete.
The optimizer microphone is sensitive to heat. Store it in a cool place and away from direct sunlight after measurement. Do not leave it in a place where it will be subjected to high temperatures such on an AV component.
y
• If you do not want to apply the measurement results, select “Cancel.”
• Perform “Auto Setup” again if you change the number or positions of speakers.
• If you press n ENTER before removing the optimizer microphone,
“1 Auto Setup” of “Speaker Setup” in the setup menu (see page 39) is
displayed.
When measurement is successfully completed,
“YPAO Complete” appears on the front panel display.
YPAOComplete
19
En
Optimizing the speaker setting for your listening room (YPAO)
When an error message is displayed during measurement
Press n Cursor n once, and select “Retry” or
“Exit” using n Cursor l / h and then press n ENTER .
Retry
Performs “Auto Setup” again.
Exit
Terminates the measurement and “Auto Setup.” y
•
See page 51 for details on error messages.
• When “E-5:NOISY” appears, you can continue measurement. To continue measurement, select “Proceed.” However, we recommend that you solve the problem first and then perform measurement again.
When a warning message is displayed after measurement
If a problem occurs during measurement, “W-xx” (xx indicates the number) is displayed on the front panel display. Check the error and solve the problems.
W-1:PHASE
y
•
See page 52 for details on warning messages.
• Optimization will not be performed while a warning message is displayed. We recommend that you solve the problem and perform “Auto
Setup” again.
1
If a warning message is displayed, press n ENTER .
Details of the warning message are displayed. If there are multiple warning messages, you can display the next message using n Cursor h .
2
To return to the top result display, press n ENTER again.
20
En
BASIC OPERATION
Playback
Basic procedure
1
Turn on external components (TV, DVD player, etc.) connected to this unit.
2
Press N INPUT l / h (or g Input selection keys ) to select an input source.
The name of the selected input source is displayed for a few seconds.
Input source name
VOL.
AV1
Volume
VOL.
Volume-18.5dB
L
SL
SW
C
R
SR
Using the SCENE function
This unit has a SCENE function that allows you to change input sources and sound field programs with one key. Four scenes are available for different usages, such as playing movies or music. The following input sources and sound field programs are provided as the initial factory settings.
BD/DVD
TV
CD
RADIO
Input source
HDMI 1
AV 1
AV 3
TUNER
Sound field program
Straight
Straight
Straight
7ch Enhancer y
• When this unit is on standby, you can turn on this unit by pressing the
SCENE key.
Selecting a SCENE
Press I SCENE (or k SCENE ).
3
Play the external component that you have selected as the source input, or select a radio station on the tuner.
Refer to the operating instructions of the external component for details on playback. For selecting radio stations or playback of an iPod or Bluetooth component using this unit, see the following.
•
FM/AM radio tuning (see page 28)
•
Bluetooth component playback (see page 32)
•
4
Turn the P VOLUME control to adjust the volume (or press o VOLUME +/– ).
Note
When you play back a DTS-CD, noise may be output in some conditions, which may cause a speaker malfunction. Make sure that the volume is set to low before starting playback. If noise is output, do the following.
1) When only noise is output
If a DTS bitstream signal is not properly input to this unit, only noise is output. Connect the playback component to this unit by digital connection and play back the DTS-CD. If the condition is not improved, the problem may results from the playback component. Consult the manufacturer of the playback component.
2) When noise is output during playback or skip operation
Before playing back the DTS-CD, display the option menu after selecting the input source and set “Decoder Mode” to
Registering input source/sound field program
Select the desired input source/sound field program, and pressing down I SCENE (or k SCENE ) until “SET Complete” appears on the front panel display.
Switching remotely controlled external components linked to scene selections
You can operate an external component with the remote control of this unit by setting a remote control code for the external component for each input source. Setting remote control codes for desired input sources allows you to switch between external components linked to scene selections.
1
Register the remote control code of an external component to the desired input
Note
• Remote control codes cannot be registered to a TUNER input.
21
En
Playback
2
Press g Input selection keys on the remote control for the input source whose remote control code was registered in step 1 for about 3 seconds while pressing down k SCENE key whose assignment you want to change.
The external component can now be controlled remotely just by selecting a scene.
Muting audio output temporarily
(MUTE)
1
Press q MUTE on the remote control to mute the audio output.
The MUTE indicator on the front panel display flashes while audio output is muted.
2
Press q MUTE again to resume audio output.
Adjusting high/low frequency sound
(tone control)
You can adjust the balance of the high frequency range
(Treble) and low frequency range (Bass) of sounds output from the front left and right speakers to obtain desired tone.
y
• The tone control of the speakers or headphones can be set separately. Set the headphone tone control with the headphones connected.
1
Press J TONE CONTROL on the front panel repeatedly to select “Treble” or “Bass.”
The current setting is displayed on the front panel display.
Treble 0.0dB
2
Adjust the frequency range using
K PROGRAM l / h .
Control range: –10.0 dB to +10.0 dB
The display returns the previous screen soon after you release the key.
Notes
• The tone control settings are not effective during playback in direct mode.
• If you set the balance extremely off, sounds may not match those from other channels well.
Enjoying pure hi-fi sound
Use Direct mode to enjoy the pure high fidelity sound of the selected source. When Direct mode is activated, this unit plays back the selected source with the least circuitry.
Press M DIRECT (or j DIRECT ) to turn the
Direct mode on or off.
The following features are disabled in Direct mode.
– sound field program, tone control
– display and operation of the option menu and setup menu y
• While direct mode is on, the front panel display becomes dim. When setting it back off, the brightness of the front panel display returns to the previous setting.
Using the sleep timer
The sleep timer is useful if you want to go to sleep while this unit is playing or recording a source.
Press e SLEEP repeatedly to set the amount of time.
Each time you press e SLEEP , the front panel display changes as shown below.
Sleep 120min.
Sleep 90min.
Sleep Off Sleep 30min.
Sleep 60min.
When the sleep timer is set, the SLEEP indicator on the front panel display lights up.
Press e SLEEP on the remote control repeatedly until
“Sleep Off” appears on the front panel display.
Using your headphones
Plug your headphones in the B PHONES jack on the front panel.
When you select a sound field program while using the headphones, the mode is automatically set to SILENT
CINEMA mode.
Notes
• When you connect headphones, no signals are output at the speaker terminals.
• When multi-channel signals are processed, sounds in all channels are divided to left and right channels.
22
En
Playback
Displaying input signal information
You can display information on audio/video signals input to this unit for each input source.
1
Select the desired input source, and press m OPTION .
The option menu for the selected input source is
2
Press n Cursor k / n to select “Signal Info,” and press n ENTER .
Information on input signals is displayed. See page 34 on messages displayed on the front panel
display.
3
Press n Cursor k / n to select the desired item.
Changing information on the front panel display
Information displayed on the front panel display can be changed by pressing
C INFO (or i INFO ).
The following information can be displayed according to the input source.
For example, if you select HDMI1 input and display “DSP
Program,” the following screen appears on the front panel display.
Input source
DolbyD
Note
• If an HDMI related error occurs, press n Cursor to display an error message.
4
To end the information display, press m OPTION .
Straight
Sound field program (DSP program)
The following information is displayed for each input source.
HDMI1-4:
AV1-6:
AUDIO1-2:
V-AUX:
Input, DSP Program, Audio Decoder
Input, DSP Program, Audio Decoder
Input, DSP Program, Audio Decoder
Input, DSP Program, Audio Decoder
FM/AM: Frequency, DSP Program, Audio
Decoder iPod (Simple remote mode): Input, DSP Program, Audio Decoder iPod (Menu browse mode): (in PlayInfo displayed) Artist, Album,
Song, DSP Program, Audio Decoder
Bluetooth:
(in Play menu displayed) List
Input, DSP Program, Audio Decoder
23
En
Enjoy the sound field programs
This unit is also equipped with a Yamaha digital sound field processing (DSP) chip. You can enjoy multi-channel sounds for almost all input sources using various sound field programs stored on the chip and a variety of surround decoders.
Selecting sound field programs
â–
Selecting a sound field program on the front panel
Press K PROGRAM l / h repeatedly to select a desired sound field program.
â–
Selecting a sound field program with the remote control
Perform the following operations depending on the category of the sound field programs.
Sound field programs for movies/TV programs ...............................Press j MOVIE repeatedly.
Sound field programs for music........................................................Press j MUSIC repeatedly.
Stereo reproduction ...........................................................................Press j STEREO repeatedly.
Multi-channel stereo reproduction ....................................................Press j STEREO repeatedly.
Compressed music enhancer.............................................................Press j STEREO repeatedly.
Surround decoder ..............................................................................Press j SUR.DECODE
repeatedly.
For example, if you select “Sci-Fi” in “movie/TV program,” the following screen appears on the front panel display.
Sound field program category
Sci-Fi
Program name
Notes
• Sound field programs are stored for each input source. When you change the input source, the sound field program previously selected for that input source is applied again.
• When you play back the Dolby Digital Plus, Dolby TrueHD, DTS Express, DTS-HD Master Audio, or DTS-HD High Resolution Audio sources, this unit does not apply any sound field program other than the surround decoder and they are played back in straight decode mode.
• If the sampling frequency of an input source is higher than 96 kHz, this unit does not apply any sound field programs.
Sound field program descriptions
This unit provides sound field programs for multiple categories including music, movies and stereo reproduction. Select a sound field program based on your listening preference, not merely on the name of the program, etc.
y
•
•
Each program can adjust sound field elements (sound field parameters). For details, see page 36.
• in the table indicates the sound field program with CINEMA DSP.
For movie/TV program sources
Program
Standard
Spectacle
Sci-Fi
Adventure
Descriptions
This program creates a sound field emphasizing the surrounding feeling without disturbing the original acoustic positioning of multi-channel audio such as Dolby Digital and DTS. It has been designed with the concept of “an ideal movie theater,” in which the audience is surrounded by beautiful reverberations from the left, right and rear.
This program represents the spectacular feeling of large-scale movie productions.
It reproduces a broad theater sound field matching the cinemascope and wider-screen movies with an excellent dynamic range from very small to extremely large sound.
This program clearly reproduces the finely elaborated sound design of the latest science fiction and special effectsfeaturing movies.
You can enjoy a variety of cinematographically created virtual spaces reproduced with clear separation between dialog, sound effects and background music.
This program is ideal for precisely reproducing the sound design of action and adventure movies.
The sound field restrains reverberations but puts emphasis on reproducing a powerful space expanded widely to the left and right. The reproduced depth is also restrained relatively to ensure the separation between audio channels and the clarity of the sound.
24
En
Drama
Program
Mono Movie
Sports
Action Game
Roleplaying Game
Enjoy the sound field programs
Descriptions
This sound field features stable reverberations that match a wide range of movie genres from serious dramas to musicals and comedies. The reverberations are modest but offer an optimum 3D feeling, reproducing effects tones and background music softly but cubically around clear words and center positioning in a way that does not fatigue the listener even after long hours of viewing.
This program is provided for reproducing monaural video sources such as a classic movie in an atmosphere of a good old movie theater.
The program produces the optimum expansion and reverberation to the original audio to create a comfortable space with a certain sound depth.
This program allows the listeners to enjoy stereo sport broadcasts and studio variety programs with enriched live feeling. In sports broadcasts, the voices of the commentator and sportscaster are positioned clearly at the center while the atmosphere of the stadium expands in an optimum space to offer the listeners with a feeling of presence in the stadium.
This sound field has been suitable for action games such as car racing and FPS games. It uses the reflection data that limits the effects range per channel in order to offer a powerful playing environment with a being-there feeling by enhancing various effects tones while maintaining a clear sense of directions.
This sound field has been suitable for role-playing and adventure games. It combines the sound field effects for movies and the sound field designs for “Action Game” to represent the depth and 3D feeling of the field during play, while offering movie-like surround effects in the movie scenes in the game.
For audio music sources
Program
Hall in Munich
Hall in Vienna
Chamber
Cellar Club
The Roxy Theatre
The Bottom Line
Music Video
Descriptions
This sound field simulates a concert hall with approximately 2500 seats in Munich, using stylish wood for the interior finishing as normal standards for European concert halls. Fine, beautiful reverberations spread richly, creating a calming atmosphere. The listener’s virtual seat is at the center left of the arena.
This is an approximately 1700-seated, middle-sized concert hall with a shoebox shape that is traditional in Vienna.
Pillars and ornate carvings create extremely complex reflections from all around the audience, producing a very full, rich sound.
This program creates a relatively wide space with a high ceiling like an audience hall in a palace. It offers pleasant reverberations that are suitable for courtly music and chamber music.
This program simulates a live house with a low ceiling and homey atmosphere. A realistic, live sound field features powerful sound as if the listener is in a row in front of a small stage.
This is the sound field of a rock music live house in Los Angeles, with approximately 460 seats. The listener’s virtual seat is at the center left of the hall.
This is the sound field at stage front in The Bottom Line, that was a famous New York jazz club once. The floor can seat 300 people to the left and right in a sound field offering real and vibrant sound.
This sound field offers an image of a concert hall for live performance of pop, rock and jazz music. The listener can indulge oneself in a hot live space thanks to the presence sound field that emphasizes the vividness of vocals and solo play and the beat of rhythm instruments, and to the surround sound field that reproduces the space of a big live hall.
For stereo reproduction
Program
2ch Stereo
Descriptions
Use this program to mix down multi-channel sources to 2 channels.
y
• When multi-channel signals are input, they are downmixed to 2 channels and output from the front left and right speakers.
25
En
Enjoy the sound field programs
For Multi-channel stereo reproduction
Program
7ch Stereo
Descriptions
Use this program to output sound from all speakers. When you play back multi-channel sources, this unit downmixes the source to 2 channels, and then outputs the sound from all speakers. This program creates a larger sound field and is ideal for background music at parties, etc.
The Compressed Music Enhancer
Program
Straight Enhancer
7ch Enhancer
Descriptions
Use this program to enhance the sound nearest to the original depth and width of the 2-channel or multi-channel compression artifacts.
Use this program to play back compression artifacts in 7-channel stereo.
Surround decode mode
Select this program to playback sources with selected decoders. You can playback 2-channel sources on multi-channels.
Decoder
Pro Logic
PLIIx Movie /
PLII Movie
PLIIx Music /
PLII Music
PLIIx Game /
PLII Game
Neo:6 Cinema
Neo:6 Music
Descriptions
Dolby Pro Logic decoder suitable for all kinds of sources.
Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder suitable for movies. If your listening environment is as follows, you cannot select the Dolby Pro Logic IIx decoder.
• When the surround back speakers are not connected
• When headphones are connected
Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder suitable for music. If your listening environment is as follows, you cannot select the Dolby Pro Logic IIx decoder.
• When the surround back speakers are not connected
• When headphones are connected
Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder suitable for games. If your listening environment is as follows, you cannot select the Dolby Pro Logic IIx decoder.
• When the surround back speakers are not connected
• When headphones are connected
DTS decoder suitable for movies.
DTS decoder suitable for music.
y
•
26
En
Enjoy the sound field programs
Enjoying unprocessed input sources
(Straight decoding mode)
In straight decoding mode, sounds are reproduced without sound field effect. 2-channel stereo sources are output from only the front left and right speakers. Multi-channel input sources are decoded straight into the appropriate channels and multi-channel sounds are reproduced without a sound field effect.
1
To enable straight decoding mode, press
L STRAIGHT (or j STRAIGHT ).
“Straight” appears on the front panel display.
2
To cancel straight decoding mode, press
L STRAIGHT (or j STRAIGHT ) again.
A sound field program name appears on the front panel display, and sound is reproduced with that sound field effect.
Enjoying sound field programs without surround speakers (Virtual CINEMA
DSP)
Virtual CINEMA DSP allows you to enjoy DSP sound field surround effects even without any surround speakers by using virtual surround speakers. You can even enjoy
Virtual CINEMA DSP using a minimal two-speaker system that does not include a center speaker.
mode.
Note
• Virtual CINEMA DSP is not available in the following conditions even if
you set “Sur. L/R” to “None” (see page 40).
– headphone plug is connected to the PHONES jack.
– 7ch Stereo of the field sound program is selected.
– direct mode or straight decoding mode is used.
Enjoy sound field programs with headphones (SILENT CINEMA™)
SILENT CINEMA allows you to enjoy multi-channel sources with your headphones. SILENT CINEMA mode is automatically selected when you connect the headphone plug to the PHONES jack.
Note
• SILENT CINEMA mode is not available in the following conditions.
– 2ch Stereo of the sound field program is selected.
– direct mode or straight decoding mode is selected.
27
En
FM/AM tuning
The FM/AM tuner of this unit provides the following two modes for tuning.
â– Frequency tuning mode (Auto tuning /
Manual tuning)
You can tune in to a desired FM/AM station by searching or specifying its frequency.
â– Preset tuning mode (Preset tuning)
You can preset the frequencies of FM/AM stations by registering them to specific numbers, and later just select those numbers to tune in.
Note
Be sure to set the tuner frequency step according to the frequency
Note
• Adjust the FM/AM antennas connected to this unit for the best reception.
Tuning in to the desired FM/AM station
(Frequency tuning)
1
Press N INPUT l / h (or g TUNER ) repeatedly and switch the input source to
“TUNER.”
2
Press F FM ( h FM ) or G AM ( h AM ) to select a band.
“FM” or “AM” appears on the front panel display according to the band that you have selected.
3
Press H TUNING l / h (or h TUNING k / n ) to specify the frequency.
To adjust the frequency to a higher range, press h (or k ). To adjust it to the lower range, press l (or n ).
The TUNED indicator on the front panel display lights up when the tuner is tuned in to a station. The
STEREO indicator also lights up if the program being broadcasted is in stereo.
STEREO
TUNED
FM92.50MHz
The frequency changes in the following manner according to how you press H TUNING l / h (or h TUNING k
/ n ).
When you press the key more than 1 second.
The tuner searches the frequency of a station that is detectable around the current frequency. This is effective when the tuner can receive strong signals without any interference. Once the search starts, release the key.
When you keep holding the key, the search continues even when a station is detected. This is useful when you want to tune in to a specific station.
When you press and release the key
The tuner increases or decreases the frequency in steps.
Use this method when the tuner cannot receive strong signals and stations are skipped during the search. You can listen to better quality sound even when the tuner cannot receive a strong signal.
y
• You can switch between stereo and monaural for FM broadcast in the
4
To tune in by direct frequency tuning, enter the frequency of the desired station using the numeric keys on the remote control.
Enter only integers. For example, if you want to set the frequency to 88.90 MHz, enter “8890” using s Numeric keys .
Notes
• When you press s Numeric keys during preset tuning, a preset number is selected. Set tuning mode to normal tuning mode using H
TUNING l / h (or h TUNING k / n ) prior to the operation.
• “Wrong Station!” appears on the front panel display when you enter a frequency that is out of receivable range. Make sure that the entered frequency is correct.
• You do not need enter zero if it comes at the end of a decimal number. For example, enter “925” for “92.50 MHz” or “940” for
“94.00MHz.”
Registering FM/AM stations and tuning in (Preset tuning)
You can register up to 40 FM/AM stations (Preset) using
“Automatic station preset” or “Manual station preset.”
Registering stations by automatic station preset
The tuner automatically detects FM stations with strong signals and registers up to 40 stations. AM stations cannot be automatically registered. Use manual station preset.
1
Press N INPUT l / h repeatedly (or press g TUNER ) to switch the input source to
“TUNER.”
2
Press m OPTION on the remote control.
The option menu screen for setting options of tuner input appears on the front panel display.
y
•
For details on the option menu, see page 33.
3
Select “Auto Preset,” and press n ENTER .
Auto Preset
Automatic station preset starts about 5 seconds later from the lowest frequency upwards.
2 8
En
FM/AM tuning y
• You can select the preset number at which the preset starts by pressing h PRESET k / n or n Cursor k / n while the front panel display is in the state as shown in the below figure.
• To cancel registration, press n RETURN on the remote control.
Status
01:FM87.50MHz
Preset number Frequency
During the automatic station preset, the upper area of the screen changes as follows: READY
→
SEARCH
→
MEMORY each time a station is registered.
When registration is complete, “FINISH” appears and the option menu screen automatically reappears.
When you press m OPTION on the remote control, the screen returns to the original state.
Registering stations by manual station preset
You can manually register AM stations or FM stations with weak signals.
1
).
2
Press D MEMORY (or h MEMORY ).
“Manual Preset” appears on the front panel display, followed soon by the preset number to which the station will be registered.
y
• By pressing down D
MEMORY (or h MEMORY ) for more than 2 seconds, you can skip step 3 and register the preset number to be one higher than the last preset number.
3
Press E PRESET l / h (or h PRESET k / n ) on the remote control to select the preset number to which the station will be registered.
When you select a preset number to which no station is registered, “Empty” appears on the display. When you select a registered preset number, a registered frequency is displayed on the right of the preset number.
New registered frequency
01:Empty
Preset number
Flashing Empty (or frequency that is currently registered to the preset number) y
• You can select a preset number using the s Numeric keys .
4
Press D MEMORY (or h MEMORY ) again to register.
When registration is complete, the screen returns to the original state.
To end the operation, press m OPTION .
y
• To cancel registration, press n RETURN on the remote control or leave the tuner without any operations for about 30 seconds.
Calling a preset station (Preset tuning)
You can call preset stations registered by automatic station preset or manual station preset.
Press E PRESET l / h (or h PRESET k / n ) to select a preset number.
y
• Preset numbers to which no stations are registered will be skipped.
• When “No Presets” or “No Presets in Memory” is displayed it means that
no stations are registered. See page 28 and register stations.
• You can directly select a preset number by pressing a s Numeric keys while calling a preset station. “Empty” appears on the display if you enter a preset number to which no station is registered. “Wrong
Num.” appears if you enter an invalid number.
• When you press s Numeric keys during normal tuning, a preset number is selected. Set tuning mode to preset tuning mode using
E PRESET l / h (or h PRESET k / n ) prior to the operation.
Clearing the preset station
1
Press N INPUT l / h repeatedly (or press g TUNER ) to switch the input source to
“TUNER.”
2
Press m OPTION on the remote control.
The option menu screen for setting options of tuner input appears on the front panel display.
3
Display “Clear Preset” using the n Cursor k
/ n and press n ENTER .
The following screen appears on the display.
01:FM92.50MHz
Preset number of the registered station you want to clear.
y
• You can cancel the operation and return to the option menu screen by pressing n RETURN on the remote control.
4
Select the preset number of the registered station you want to clear using the n Cursor k / n and press n ENTER .
The preset station registered to the selected preset number is cleared. To clear the registration of multiple preset numbers, repeat the above steps.
To end the operation, press m OPTION .
29
En
Using iPod™
Once you have stationed your iPod in a Yamaha iPod universal dock (such as the YDS-11, sold separately) connected to
remote control. You can also use the Compressed Music Enhancer mode of this unit to improve the sound quality of the
compression artifacts (such as MP3 format) stored on your iPod (see page 24).
Notes
• iPod touch, iPod (Click and Wheel including iPod classic), iPod nano, and iPod mini are supported.
• Some features may not be compatible depending on the model or the software version of your iPod.
• Some features may not be available depending on the model of Yamaha iPod universal dock. The following sections describe the procedure when using the YDS-11.
y
• Once the connection between your iPod and this unit is complete, “iPod connected” appears on the front panel display.
•
Controlling iPod™
You can control your iPod when you set it in the iPod universal dock and switch the input source to DOCK. The operations of your iPod can be done with the aid of the front panel display (menu browse mode) or without it
(simple remote mode).
When you connect your iPod to this unit, you can perform the following operations with the remote control.
n r p
Key
ENTER k f a b s n l h w e p
DISPLAY
Function
Subsequent menu
Menu up
Menu down
Previous menu
Subsequent menu
Search backward (Press and hold)
Search forward (Press and hold)
Skip forward
Skip backward
Stop
Pause (Menu browse mode)
Play/Pause (Simple remote mode)
Play (Menu browse mode)
Play/Pause (Simple remote mode)
Switch between Menu browse mode and
Simple remote mode y
• You can directly operate your iPod while it is connected to this unit.
1
Change the input source to “iPod (DOCK)” using N INPUT l / h (or g DOCK ).
Press p DISPLAY on the remote control to change between menu browse mode and simple remote mode, as required.
When you select menu browse mode, the front panel display changes as follows.
Music
VOL.
L
SL
SW
C
R
SR
2
Press n Cursor k / n / l / h to select a menu item and then n ENTER to start playback.
Menu items of “Music”
Playlists, Artists, Albums, Songs, Genres, Composers
• Playlists > Songs
• Artists > Albums > Songs
• Albums > Songs
• Songs
• Genres > Artists > Albums > Songs
• Composers > Albums > Songs
Menu items of “Videos”
Menu items vary depending on the files stored on your iPod.
y
• You can change information screens on the front panel display using C INFO (or i INFO
) (see page 23). Items displayed on the
front panel display vary depending on mode that is currently selected.
30
En
Shuffle/repeat playback
You can use a special playback function such as shuffle playback and repeat playback by setting the option menu.
1
Press p DISPLAY to switch to menu browse mode while “DOCK” is selected as the input source.
The option menu can be displayed only in menu browse mode. Press p DISPLAY to switch to menu browse mode before starting shuffle or repeat playback.
2
Press m OPTION .
The option menu is displayed.
3
Press n Cursor k / n to select the desired playback function, Shuffle or Repeat, then press n ENTER .
The following playback styles are available depending on the playback function selected.
Shuffle : Plays back songs or albums in random order (Choices: Off, Songs, Albums).
• Select “Off” if you do not want to play back in random order.
• Select “Songs” to play back songs in random order.
• Select “Albums” to play back albums in random order.
Repeat : Plays back songs or albums repeatedly
(Choices: Off, One, All).
• Select “Off” if you do not want to play back repeatedly.
• Select “One” to repeat each song.
• Select “All” to repeat all songs.
4
Select the desired style using n Cursor l / h .
The style is selected. Playback starts with the function selected in step 3.
To return to the previous screen, press n RETURN .
To return to the previous playback function, redo the above steps.
Using iPod™
31
En
Using Bluetooth™ components
You can connect a Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) to the DOCK terminal of this unit and enjoy the music contents stored in your Bluetooth component (such as a portable music player) without wiring between this unit and the Bluetooth component. You need to perform “Pairing” the connected Bluetooth wireless audio receiver and your Bluetooth component in advance.
Note
• This unit supports A2DP (Advanced Audio Distribution Profile) of the Bluetooth profile.
Pairing the Bluetooth™ wireless audio receiver and your Bluetooth™ component
“Pairing” refers to the operation of registering a Bluetooth component for Bluetooth communications. Pairing must be performed when using a Bluetooth component with the
Bluetooth wireless audio receiver connected to this unit for the first time or if the pairing data has been deleted.
y
• You only need the pairing operation for the first time that you use the
Bluetooth component with the Bluetooth wireless audio receiver.
• Pairing requires operations on this unit and on the other component with which Bluetooth communications are to be established. If necessary, refer to the other component’s operating instructions.
â–
Pairing the Bluetooth™ wireless audio receiver and your Bluetooth™ component
To ensure security, a time limit of 8 minutes is set for the pairing operation. You are recommended to read and fully understand all the instructions before starting.
1
Change the input source to “DOCK” using
N INPUT l / h (or g DOCK ).
2
Turn on the Bluetooth component you want to pair with and set it to pairing mode.
For details on operation of the Bluetooth component, refer to its operating instructions.
3
Press m OPTION .
The option menu for DOCK input appears on the front panel display.
4
Press n Cursor n to select “Pairing” and press n ENTER .
“Searching” appears on the front panel display and the pairing operation starts.
y
• To cancel pairing, press n RETURN .
• You can also start pairing operation by pressing and holding
D
MEMORY on the front panel.
5
Make sure the Bluetooth component recognizes the Bluetooth wireless audio receiver.
If the Bluetooth have recognized the Bluetooth wireless audio receiver, “YBA-10 YAMAHA,” for instance, is displayed in the Bluetooth device list.
6
Select the Bluetooth wireless audio receiver from the Bluetooth device list, and enter a path key “0000” into the Bluetooth component.
When pairing is complete, “Completed” appears on the front panel display.
y
• The Yamaha Bluetooth wireless audio receiver can be paired with up to eight Bluetooth components. When pairing is conducted successfully with a ninth component and the pairing data is registered, the pairing data for the least recently used other component is cleared.
Playback of the Bluetooth™ component
1
Change the input source to “DOCK” using
N INPUT l / h (or g DOCK ).
2
Press m OPTION .
3
Press n Cursor n repeatedly to select
“Connect” and press n ENTER .
After you execute “Connect,” communication with the Bluetooth component is established. When the connected Bluetooth wireless audio receiver recognizes the Bluetooth component, “BT
Connected” appears on the front panel display.
y
• When you press n ENTER on the remote control, the connected
Bluetooth wireless audio receiver searches and connects to the last connected Bluetooth component. If the Bluetooth wireless audio receiver cannot find the Bluetooth component, “Not found” appears on the front panel display.
• To disconnect the Bluetooth wireless audio receiver from the
Bluetooth component, display the option menu again, select
“Disconnect,” and press n ENTER .
4
Start playback of the Bluetooth component.
32
En
ADVANCED OPERATION
Setting the option menu for each input source (OPTION menu)
This unit has an OPTION menu of frequently used menu items for input sources compatible with this unit. The procedure for setting the OPTION menu items is described below.
1
Select an input source using N INPUT l / h
(or g Input selection keys ).
OPTION menu items
The following menu items are provided for each input source.
2
Press m OPTION on the remote control.
The OPTION menu appears. The displayed OPTION menu items differ depending on the input source. For details, see the following section.
Input
Source
Menu item
HDMI1-4 Volume
Trim
Decoder
Mode
EXTD
Surround
Signal Info
VolumeTrim
AV1-4 Volume
Trim
Decoder
Mode
EXTD
Surround
Signal Info
3
Select the desired menu item using n Cursor k / n , and press n ENTER .
Parameters of the selected menu item are displayed.
4
Change the setting of the selected menu item
(or enable a function) using n Cursor k / n / l / h and n ENTER .
Details of the selected menu item are displayed.
Parameters you can set differ depending on the menu items.
5
To close the OPTION menu, press m OPTION .
You can also use n RETURN to return to the previous screen or close the OPTION menu.
y
• When n Cursor or other keys do not work after completing the menu, select the input source again using g Input selection keys .
AV5-6 Volume
Trim
AUDIO1-2 Volume
Trim
V-AUX Volume
Trim
TUNER iPod
(DOCK)
Bluetooth
(DOCK)
Volume
Trim
Volume
Trim
Volume
Trim
FM Mode Auto
Preset
Shuffle Repeat
Connect/
Disconnect
Pairing
Clear
Preset
Details of the menu items are as follows: y
• The default settings are marked with “*.”
â–
Volume Trim
Input source: All
Adjustable range: -6.0 dB to 0.0 dB * to +6.0 dB
(in 0.5 dB steps)
Reduces any change in volume when switching input sources by correcting volume differences between input sources.
You can set this parameter for each input source.
33
En
Setting the option menu for each input source (OPTION menu)
â–
Decoder Mode
Input source: HDMI1-4, AV1-4
Choices: Auto */ DTS
Selects DTS digital audio signals for reproduction.
Auto
DTS
Automatically selects audio input signals.
Selects DTS signals only. Other input signals are not reproduced.
â–
EXTD Surround
Input source: HDMI1-4, AV1-4
Choices: Auto */ PLIIxMovie / PLIIxMusic / EX/ES /
Off
Selects whether to reproduce multi-channel input signals in 6.1- or 7.1-channel when surround back speakers are used.
Auto Automatically selects the most suitable decoder according to whether a flag for reproducing surround back channel is present,
PLIIx
Movie and reproduces the signals in 6.1- or 7.1channel.
Always reproduces signals in 6.1- or 7.1channel using the PLIIxMovie decoder whether or not surround back channel signals are contained. You can select this parameter when one or two speakers are connected.
Always reproduces signals in 6.1- or 7.1PLIIx
Music channel using the PLIIxMusic decoder whether or not surround back channel signals are contained. You can select this parameter when one or two speakers are connected.
EX/ES Automatically selects the most suitable decoder for input signals whether or not the
Off flag for reproducing surround back channel is present, and always reproduces signals in 6.1channel.
Always reproduces signals in 5.1-channel whether or not the flag for reproducing surround back channel is present.
Signal Info
Input source: HDMI1-4, AV1-4
Displays information on audio and video signals on the front panel display. You can change items to be displayed using n Cursor k / n .
Signal Info parameters
â–
Audio information
Information Description
Format of digital audio signals.
The number of input signal channels (front/ surround/LFE).
For example, if input signal channels are 3 front channels, 2 surrounds and LFE, “3/2/
0.1” is displayed.
If a channel that cannot be expressed as the above, a total number of channels such as
“5.1ch” may be displayed.
The sampling frequency of digital input signal.
The bit rate of input signal per second.
Notes
• “No Signal” is displayed when no signals are input and “---” is displayed when signals that this unit cannot recognize are input.
• The bit rate may vary during playback.
â– Video information
Information Description
Format and resolution of video input signal.
Format and resolution of video output signal.
HDMI error information
(appears only when an error has occurred)
Information Description
Error messages about HDMI signals and
HDMI components.See the following for details of the error messages.
HDCP Error
Device Over
HDCP authentication failed.
The number of HDMI components connected is over the limit.
â–
FM Mode
Input source: TUNER
Choices: Stereo */ Mono
Sets FM broadcasting receiving mode.
Stereo Receives in stereo mode.
Mono Receives in monaural mode. You can get better reception in MONO mode.
34
En
â–
Auto Preset
Input source: TUNER
Automatically detects radio stations in the FM frequency
band and registers them as preset stations (see page 28).
â–
Clear Preset
Input source: TUNER
Clears the preset stations (see page 29).
â–
Shuffle
Input source: iPod (DOCK)
Choices: Off */ Songs / Albums
Changes the shuffle playback style (see page 31).
â–
Repeat
Input source: iPod (DOCK)
Choices: Off */ One / All
Changes the repeat playback style (see page 31).
â–
Connect
/
Disconnect
Input source: Bluetooth (DOCK)
Switches communication with a Bluetooth component on
â–
Pairing
Input source: Bluetooth (DOCK)
Performs pairing of this unit and a Bluetooth component
Setting the option menu for each input source (OPTION menu)
35
En
Editing surround decoders/sound field programs
Selecting a decoder used with a sound field program
y
• Repeat steps 4 and 5 to change other sound field program parameters.
5
To end the edit, press l SETUP .
When using sound field programs for movies or TV programs, you can select a surround decoder to be used with the sound field program after setting the parameters from the following decoders. To set the parameters for sound field programs, see the following section.
Decoders that can be used with a sound field program
• PLIIx Movie (PLII Movie)
• Neo:6 Cinema
To initialize the parameters of the selected sound field program, n Cursor n repeatedly to select “Initialize” and then press, n Cursor h . When “Press Again h ” appears on the front panel display, press n Cursor h again, press n Cursor h to confirm the initialization or n Cursor l to cancel it.
Sound field parameters
Note
• The following MOVIE sound field programs cannot be used with a surround decoder.
– Mono Movie
– Sports
– Action Game
– Roleplaying Game
Setting sound field parameters
Although the field sound programs would satisfy you as they are with the default parameters, you can arrange sound effect or decoders suitable for acoustical conditions of sources or rooms by setting the parameters (sound field elements).
y
• You can protect the sound field against the changes of parameters the sound filed parameters when “Memory Guard” of the setup menu is set
to “On” (see page 43). To change the parameters, set it to “Off.”
1
Press l SETUP on the remote control.
The setup menu appears on the front panel display.
y
• The default settings are marked with “*.”
CINEMA DSP parameters
DSP Level
Adjustable range: -6 dB to 0 dB * to +3 dB
Fine adjusts an effect level (level of the sound field effect to be added). You can adjust the level of the sound field effect while checking sound levels. Adjust “DSP Level” as follows.
• The effect sound is too soft.
• There are no differences between effects of the sound field programs.
→
Increase the effect level.
• The sound is dull.
• The sound field effect is added too much.
→
Reduce the effect level.
2
Press n Cursor k / n to select “DSP
Parameter” and press n ENTER .
The screen changes as follows.
PRM:Sci-Fi
Sound field program
Parameters only usable in certain sound field programs
â–
2ch Stereo only
Direct
Choices: Auto */ Off
Automatically bypasses the DSP circuit and tone control circuit when an analog sound source is selected as the input source. You can enjoy a higher quality sound.
3
Press n Cursor l / h to select the sound field program.
4
Press n Cursor k / n to select the parameter that you want to change, and press n Cursor l / h to change the parameter.
You can change the parameter display in the following order by pressing n Cursor n repeatedly.
• sound field program
• surround decoder
• sound field parameter
For sound field parameters, see “Sound field parameters” on this page.
Auto Outputs sound by bypassing the DSP circuit and tone control circuit when the “Bass” and “Treble” tone controls are both set to 0 dB.
Off Do not bypass the DSP circuit and tone control circuit.
â– 7ch Stereo only
CT Level
/
SL Level
/
SR Level
/
SB Level
Adjustable range: 0 to 100%
Adjusts the volume of the center (CT), surround L (SL) surround R (SR) and surround back (SB) channels in the
7ch Stereo program. The available parameters differ depending on the setting of the speakers.
36
En
â– Straight Enhancer/7ch Enhancer only
EFCT LVL
Choices: High */ Low
Adjusts the Compressed Music Enhancer effect level.
When the high-frequency signals of the source is emphasized too much, set the effect level to “Low.” To reduce the effect, set this parameter to “Low.” To increase the effect, set it to “High.”
Decoder parameters
You can customize decoder effects by setting the
following parameters. For kinds of decoders, see page 26.
â–
When PLIIx Music/PLII Music is selected
Panorama
Choices: Off */ On
Adjusts the soundscape of the front sound field. Sends stereo signals to the surround speakers as well as the front speakers for a wraparound effect.
Dimension
Adjustable range: -3 to STD * to +3
Adjusts the difference in level between the front sound field and the surround sound field. You can adjust the difference in level created by the software being played back to obtain the preferred sound balance. The surround sound gets stronger as you make the value more negative and the front sound gets stronger as you make the value more positive.
CT Width
Adjustable range: 0 to 3 * to 7
You can spread the center sound toward left and right according to your preference. Set this parameter to 0 for outputting the center sound from the center speaker only, or to 7 for outputting it from the front left/right speaker.
â– When Neo:6 Music is selected
C.Image
Adjustable range: 0.0
to 0.3
* to 1.0
Adjusts the front left and right channel output relative to the center channel to make the center channel more or less dominant as necessary.
Editing surround decoders/sound field programs
37
En
Operating various settings for this unit (Setup menu)
You can call the setup menu using the remote control and change the settings of various menus.
see the respective pages.
Speaker Setup
Menu/Submenu
1 Auto Setup (YPAO)
2 Manual Setup
A)Config
B)Level
C)Distance
D)Equalizer
E)Test Tone
Sound Setup
1 D. Range
2 Lipsync
HDMI Auto
Auto
Manual
Func. Setup
1 HDMI
Standby
Audio
2 Display
Dimmer
FL Scroll
3 Volume
Adptv DRC
MaxVol
IniVol
4 Input Rename
DSP Parameter
Memory Guard
Function
Sets items for speakers.
Automatically adjusts output characteristics of speakers.
Manually adjusts output characteristics of speakers.
Sets speaker configurations, such as connection status of speaker and a size of the connected speaker (sound reproduction capacity), suitable for the listening environment.
Separately adjusts volume of each speaker.
Adjusts timing at which each speaker outputs sound based on distances between speakers and the listening position.
Selects an equalizer that adjusts speaker output characteristics.
Generates test tones.
Sets various items for sound outputs.
Adjusts dynamic ranges of speakers and headphones.
Adjusts delay in output timing between video signals and audio signals.
Sets on or off of automatic adjustments for delay between output timing between video signals input from the HDMI jack and audio signals.
Fine adjusts a delay time of HDMI Auto.
Manually fine adjusts the delay of audio and visual output.
Set various items for HDMI and display.
Sets various items for input sources.
Selects on or off of output of HDMI signals input from the HDMI IN jack to the
HDMI OUT jack when this unit is on standby.
Selects this unit or a component connected to this unit via the HDMI OUT jack of this unit for reproducing sound signals input from the HDMI IN jack.
Set items for the front panel display.
Sets brightness of the front panel display.
Selects the way to display characters on the front panel display.
Sets items for volumes.
Adjust the dynamic range (difference between the maximum volume and the minimum volume) in conjunction with the volume level.
Sets the maximum volume level so that the volume will not be accidentally increased.
Sets the volume at the time this unit is turned on.
Changes input source names to be displayed on the front panel display.
Sets parameters for the sound field programs.
Protects some settings against accidental alteration.
Page
3 8
En
Operating various settings for this unit (Setup menu)
Basic operation of the setup menu
1
Press l SETUP on the remote control.
The setup menu screen appears.
2
Select a menu using n Cursor k / n , and press n ENTER .
Items of the selected menu are displayed. For example, the following screen appears when you select “Function Setup.”
1HDMI
y
• You can return to the previous screen by pressing n RETURN .
3
To display submenus, select a menu that you want to set using n Cursor k / n , and press n ENTER .
For example, the following screen appears when you select “2 Display.”
Dimmer
;;;;;;;
0
4
Select an item using n Cursor k / n , and change the setting of the item using n Cursor l / h .
y
• You can change other items by repeating step 4.
5
To finish the setting, press l SETUP .
y
• When n Cursor or other keys do not work after completing the menu, select the input source again using g Input selection keys .
Speaker Setup
You can set various items for speakers. Two kinds of adjustments are available. One is “Auto Setup (YPAO)” for automatic adjustment and another is “Manual Setup” for manual adjustment.
y
• The default settings are marked with “*.”
1 Auto Setup
Automatically adjusts output characteristics of speakers to obtain optimum balance for the output sound based on positions and performances of the speakers and acoustic characteristics or the room, which are automatically
measured. For details on operations, see page 18.
2 Manual Setup
Adjusts output characteristics of speakers based on manually set parameters.
After Auto Setup (YPAO) is performed, you can check automatically adjusted parameters in the Manual Setup menu. Fine adjust the parameters for your preference if necessary.
â–
A)Config
Sets speaker configurations, such as connection status of speaker and a size of the connected speaker (sound reproduction capacity), suitable for the listening environment.
y
• The speaker configuration includes items for defining a speaker size:
Large or Small. Large and Small refer to speakers with woofer diameters
16 cm or larger and smaller than 16 cm, respectively.
Bass Out
Choices: SWFR / Front / Both *
Selects speaker(s) for outputting low-frequency components of the LFE (low-frequency effect sound) channel or other channels. The output status is as follows.
LFE channel signals
Parameter
Both
SWFR
Front
Subwoofer
Output
Output
Not output
Front speakers
Not output
Not output
Output
Other speakers
Not output
Not output
Not output
39
En
Operating various settings for this unit (Setup menu)
Low-frequency components of other channel signals
Parameter
Both
SWFR
Front
Subwoofer
[1]
[4]
Not output
[2]
[3]
[1]
Front speakers
[3]
[3]
[3]
Other speakers
[1] Outputs low-frequency components of the front left and right channels and the channel of speaker, the size of which is set to
“Small.”
[2] Outputs low-frequency components of the front left and right channels.
[3] Outputs low frequency components when the sizes of speakers are set to “Large.”
[4] Outputs low-frequency components of the channel of speaker, the size of which is set to “Small.”
Front
Choices: Small / Large *
Sets the sizes of front left and right speakers.
Small
Large
Select this when small speakers are connected. Low-frequency components of the front left and right channels are output from a subwoofer.
Select this when large speakers are connected.
Note
• When “Bass Out” is set to “Front,” you can only select “Large.” If “Bass
Out” is changed to “Front,” “Front” automatically switches to “Large” even when it is set to “Small.”
Center
Choices: None / Small */ Large
Sets the size of center speaker.
None
Small
Large
Select this when no center speaker is connected. Center channel signals are spread to front left and right speakers.
Select this when a small center speaker is connected. Low-frequency components of center channel are output from a subwoofer.
If a subwoofer is not connected they are output from front speakers.
Select this when a large center speaker is connected.
Sur. LR
Choices: None / Small */ Large
Sets sizes of left and right surround speakers.
None Select this when no surround speakers are connected. Surround channel signals are spread to front left and right speakers.
“Sur.B” automatically switches to “None” when this is selected.
Small Select this when small surround speakers are connected. Low-frequency components of surround channels are output from a subwoofer. If a subwoofer is not connected
Large they are output from front speakers.
Select this when large surround speakers are connected.
y
• When “None” is selected, the sound field programs automatically enter the Virtual CINEMA DSP mode.
Sur. B
Choices: None */ SMLx1 / SMLx2 / LRGx1 / LRGx2
Sets sizes of left and right surround back speakers. When using the surround back speakers, connect an external amplifier to the SURROUND BACK jacks of the PRE
OUT terminals.
None
SMLx1
SMLx2
LRGx1
LRGx2
Select this when no surround back speaker are connected. Surround back channel signals are output from the surround L/R speakers and subwoofer. If the subwoofer is disabled, they are output from the surround L/R speakers and front speakers.
Select this when one small surround back speaker is connected to an external amplifier for the surround back speaker.
Select this when two small surround back speakers are connected to an external amplifier for the surround back speakers.
Select this when one large surround back speaker is connected to an external amplifier for the surround back speaker.
Select this when two large surround back speakers are connected to an external amplifier for the surround back speakers.
y
• When “None” is selected, “PLIIx Movie,” “PLIIx Music,” and “PLIIx
Game” cannot be selected.
Crossover
Choices: 40Hz / 60Hz / 80Hz */ 90Hz / 100Hz / 110Hz / 120Hz /
160Hz / 200Hz
Sets the lower limit of the low frequency component output from a speaker with a size set to “Small (SMLx1/
SMLx2).” Sound with a frequency below that limit is output from a subwoofer or front speakers.
If your subwoofer has a volume control or a crossover frequency control, set the volume to half or the crossover frequency at the maximum.
SWFR Phase
Choices: NRM */ REV
Sets the phase of your subwoofer if bass sounds are lacking or unclear.
NRM
REV
Select this not to change the phase of your subwoofer.
Select this to reverse the phase of your subwoofer.
40
En
â–
B)Level
Adjustable range: -10.0dB
to +10.0dB
(0.5 dB step)
Defaults: “ FL / FR / SWFR ” 0dB *
“ C / SL / SR / SBL / SBR ” -1.0dB
Separately adjusts volume of each speaker so that the sounds form speakers are at the same volume at the listening position. Items to be displayed vary depending on the number of speakers connected.
y
• When only one surround back speaker is connected, “SB” appears instead of “SBL” and “SBR.”
• You can adjust the volume listening to test tones when you set “Test
• If your subwoofer has a volume control or a crossover frequency control, set the volume to half or the crossover frequency at the maximum.
â–
C)Distance
Adjusts timing at which each speaker outputs sound so that sounds from speakers reach the listening position at the same time. Set unit (Unit) first and set the distance of each speaker.
Unit
Choices: meters (m) */ feet (ft) meters (m) Displays the speaker distance in meters.
feet (ft) Displays the speaker distance in feet.
Front L
/
Front R
/
Center
/
Sur. L
/
Sur. R
/
Sur.B L
/
Sur.B R
/
SWFR
Adjustable range: 0.30m
to 24.00m
( 1.0ft
to 80.0ft
)
Defaults: 3.00m
( 10.0ft
) “ Front L / Front R /
SWFR ”
2.60m
( 8.5ft
) “ Center ”
2.40m
( 8.0ft
) “ Sur. L / Sur. R /
Sur.B L / Sur.B R ” y
•
Different items are displayed depending on settings of “A)Config” (see page 39).
• When only one surround back speaker is connected, “Sur. B” appears instead of “Sur.B L” and “Sur.B R.”
Note
• If Auto Setup is executed while an external amplifier for the surround back speaker being connected, a distance to the surround back speaker longer than an actual distance may be displayed depending on the volume or balance setting of the external amplifier.
â–
D)Equalizer
Adjusts sound quality and tone using a parametric graphic equalizer.
EQ Select
Choices: PEQ / GEQ */ Off
Select an equalizer type.
PEQ
GEQ
Off
Uses a parametric equalizer selected in
“1 Auto Setup.”
If Auto Setup is not executed, this parameter is not displayed.
Uses a graphic equalizer. Press n ENTER to adjust the characteristics of the graphic equalizer.
Not use a graphic equalizer.
Off
On
Operating various settings for this unit (Setup menu)
GEQ
Choices: 63Hz / 160Hz / 400Hz / 1kHz / 2.5kHz
/
6.3kHz
/ 16kHz
Adjustable range: -6.0dB
to 0dB * to +6.0dB
(0.5 dB step)
Adjusts sound quality of each speaker using a graphic equalizer. The graphic equalizer of this unit can adjust signal levels in 7 frequency ranges.
To adjust the signal level within each range, select the desired speaker with n Cursor l / h while “Channel” is displayed, then the desired frequency band with n Cursor k / n , and adjust the signal level with n Cursor l / h .
â–
E)Test Tone
Choices: Off */ On
Switches between on and off of an oscillator that generates test tones. To turn on the oscillator, select “On” using n Cursor l / h . When “On” is selected, you can adjust the settings of “2 Manual Setup” while listening to a test tone.
Not generate test tones.
Generates test tones.
Sound Setup
You can set various items for sound outputs.
â–
1 D.Range
Choices: Min/Auto / STD / Max *
Selects the dynamic range adjustment method for reproducing bitstream signals.
Min/Auto (Min) Sets the dynamic range suitable for low volume or a quiet environment, such as at night, for bitstream signals except for
Dolby TrueHD signals.
STD
(Auto) Adjusts the dynamic range for Dolby
TrueHD signals based on input signal information.
Sets the standard dynamic range
Max recommended for regular home use.
Outputs sound without adjusting the dynamic range of the input signals.
â–
2 Lipsync
Adjusts delay between video output and audio output.
HDMI Auto
Choices: Off */ On
Automatically adjusts output timing of audio and video signals when a monitor that supports an automatic lipsync function is connected to this unit.
Off
On
Select this when the connected monitor does not support the automatic lip-sync function or you do not use the automatic lip-sync function. Set the correction time in “Manual.”
Select this when the connected monitor supports the automatic lip-sync function. Fine adjust the correction time in “Auto.”
41
En
Operating various settings for this unit (Setup menu)
Auto
Adjustable range: 0 to 240ms (1 ms step)
Enables manual fine adjustment of the correction time when “HDMI Auto” is set to “On.”
Manual
Adjustable range: 0 * to 240ms (1 ms step)
Manually adjusts the correction time. Select this when the connected monitor does not support the automatic lip-sync function or you set “HDMI Auto” to “Off.”
Function Setup
You can set various items for HDMI and display.
1 HDMI
You can set items for HDMI.
â–
Standby
Choices: On / Off *
Selects on or off of output of HDMI signals input from the
HDMI IN jack to the HDMI OUT jack when this unit is on standby. When this parameter is set to “On” signals input from the HDMI 1-4 jacks can be output to a monitor component.
On
Off
Outputs the HDMI signals to the HDMI OUT jack.
Not output the HDMI signals to the HDMI
OUT jack.
y
• To enables pass-through output, any one of the input sources connected to the HDMI1-4 must be selected before switching to standby.
• When “Standby Through” turns on, the HDMI THROUGH indicator on the front panel display lights up. While the indicator lights up, it consumes 1 to 3W of power depending on a condition of an HDMI signal passing through this unit.
â–
Audio
Choices: Amp */ TV / Amp+TV
Selects this unit or a component connected to this unit via the HDMI OUT jack of this unit for reproducing sound signals input from the HDMI IN jack.
Amp Outputs HDMI sound signals form the speakers connected to this unit.
Outputs HDMI sound signals from the TV speakers of a TV connected to this unit.
Sound output from the speakers connected to this unit is muted.
Amp+TV Outputs HDMI sound signals from the speakers connected to this unit and the speakers of a TV connected to this unit.
Note
• When “TV” or “Amp+TV” is selected, signal formats of audio and visual signals output from this unit to the monitor vary depending on specifications of the monitor.
2 Display
You can set items for the front panel display.
â–
Dimmer
Adjustable range: -4 to 0 *
Sets brightness of the front panel display. As the value is lowered, the brightness of the front panel display is darkened.
Note
• The brightness of display does not become bright in direct mode even if the value is increased.
â–
FL Scroll
Choices: Cont */ Once
Selects the way to scroll the screen when a total number of characters exceed a display area of the front panel display.
Cont
Once
Repeatedly displays all characters by scrolling.
Displays all characters by scrolling once, halts scrolling, and then displays first 14 characters.
3 Volume
You can set items for volumes.
â–
Adptv DRC
Choices: Auto / Off *
Adjust the dynamic range in conjunction with the volume level. This feature is useful when you are listening at lower volumes or at night. When this function is enabled, the dynamic range is adjusted as follows.
If the VOLUME setting is low: the dynamic range is narrow
If the VOLUME setting is high: the dynamic range is wide
Auto
Off
Input level
VOLUME: low
Auto
Off
Input level
VOLUME: high
Auto
Off
Adjusts the dynamic range automatically.
Not adjust the dynamic range automatically.
y
• The Adaptive DRC setting is effective for headphones.
42
En
Operating various settings for this unit (Setup menu)
â–
MaxVol
Adjustable range: -30.0dB
to +15.0dB
/ +16.5dB
* (5.0 dB step)
Sets the maximum volume level so that the volume will not be accidentally increased. For example, you can adjust the volume between –80.0 dB and –5.0 dB when you set this parameter to “–5.0dB.” The volume increases to the maximum level when this parameter is set to +16.5 dB
(default).
â–
IniVol
Choices: Off */ Mute / -80.0dB
to +16.5dB
(0.5 dB step)
Sets the volume at the time this unit is turned on. When this parameter is set to “Off,” the volume is set to a level that last time this unit is set to standby.
Note
• If the setting of “MaxVol” is lower than the setting of “IniVol,” the setting of “MaxVol” becomes effective. For example, when you set
“MaxVol” to “–30.0dB” and “IniVol” to “0.0dB,” the volume is automatically set to “–30.0dB” at the next time this unit is turned on.
4 Input Rename
Changes input source names to be displayed on the front panel display.
You can select an input source that you want to change the name to be displayed using n Cursor .
Selecting a name to be displayed from templates
Select an input source that you want to change the name, and select a name from the following templates using
Cursor.
– Blu-ray
– DVD
– SetTopBox
– Game
– TV
– DVR
– CD
– CD-R
– Satellite
– VCR
– Tape
– MD
– PC
– iPod
– HD DVD
– “blank” y
• If you change the display name of an input source to your original one and select the input source, the current input source name and the template name are displayed. This is convenient if you want to cancel name change operation.
Entering an original name
Select an input source that you want to name, and press n ENTER . You can enter up to 9 characters by selecting one character at a time with the following keys according to the following operation.
n Cursor l / h For selecting characters that you want to change n Cursor k / n For selecting characters to be n ENTER entered
For entering the selected characters
The following characters are available for input.
A to Z, 0 to 9, a to z, symbols (#, *, –, +, etc.) and space
DSP Parameter
You can set parameters for the sound field programs. For
Memory Guard
Choices: Off */ On
Protects settings of setup menu against accidental alteration.
Off
On
Not protect settings.
Protects the settings of the setup menu
(except for the Memory Guard setting).
43
En
Controlling other components with the remote control
You can control external components for a selected input source with the remote control. The keys available for controlling external components are as follows: d SOURCE POWER
Turns on and off an external component.
n Cursor , ENTER , RETURN
Operates the menus of external components.
Input source
[DOCK]
[A]/[B]
Category Manufacturer
DOCK
—
Yamaha
—
Default code
5011
— p DISPLAY
Switches between the screens of external components.
r External component operation keys
Function as a recording or playback key of an external component, or a menu display key.
“—” indicates no assignment y
• An external component that is controlled by the remote control can be
automatically selected according to selection of the scenes (see page 21).
Setting remote control codes
s Numeric keys
Function as numeric keys of an external component.
t TV control keys
You can control other components by setting the appropriate remote control codes. For a complete list of available remote control codes, refer to “List of remote control codes” at the end of this manual.
INPUT
MUTE
Switches visual inputs of TV
Mute audio of TV
TV VOL +/– Controls the volume of TV
TV CH +/– Switches channels of TV
POWER Turns on and off TV y
• You need to set the remote control code first to control external components.
• The remote control keys for controlling external components are available only when the external components have corresponding control keys.
The following remote control codes are assigned to input sources as factory default settings. For a complete list of available remote control codes, refer to “List of remote control codes” at the end of this manual.
â–
Default remote control code settings
1
Press c CODE SET on the remote control using a pointed object such as the tip of a ballpoint pen.
b TRANSMIT on the remote control blinks twice.
2
Press g Input selection keys .
3
Enter a remote control code using s Numeric keys .
Once the remote control code is registered, b TRANSMIT on the remote control blinks twice.
If it fails, b TRANSMIT blinks six times. Repeat from step 1.
Resetting all remote control codes
Input source Category Manufacturer
Default code
You can clear all the remote control codes previously set, and reset all of them to the initial factory settings.
[HDMI1] Blu-ray Disc Yamaha 2018
[HDMI2]
[HDMI3]
[HDMI4]
—
—
—
—
—
—
—
—
—
1
Press c CODE SET on the remote control using a pointed object such as a tip of a ballpoint pen.
b TRANSMIT on the remote control blinks twice.
[AV1] — — —
2
Press l SETUP on the remote control.
[AV2] — — —
[AV3]
[AV4]
[AV5]
CD
—
—
Yamaha
—
—
5013
—
—
3
Enter “99 8 1” using s Numeric keys .
Once the initialization is complete, b TRANSMIT on the remote control blinks twice. If it fails, b TRANSMIT blinks six times. Repeat from step 1.
[AV6] — — —
[AUDIO1]
[AUDIO2]
[V-AUX]
—
—
—
—
—
—
—
—
—
[TUNER] Tuner Yamaha 5007
44
En
Advanced setup
In the advanced setup, you can set basic operations of this unit, such as on and off of a bi-amp connection, or initialize user settings. Perform the following steps to change settings.
1
Set this unit to the standby mode.
2
Press A STANDBY/ON while pressing and holding L STRAIGHT on the front panel.
The advanced setup menu appears on the front panel display.
Setting a remote control ID
Two IDs are provided for the remote control of this unit. If another Yamaha amplifier is in the same room, setting a different remote control ID to this unit prevents unwanted operation of the other amplifier.
ADVANCEDSETUP
3
Press K PROGRAM l / h repeatedly to select the parameter you want to change.
The default setting are marked with “*.” y
• XXX in the following parameters indicate the set values.
REMOTE ID-XXX
Choices: ID1 */ ID2
Sets a remote control ID. When using multiple
Yamaha AV receivers, you can operate them with a single remote control by setting the receiver IDs to the same setting.
TU-XXXXXXXXXX
(Asia and General models only)
Choices: AM10/FM100 / AM9/FM50 *
Changes the smallest frequency step of the FM/AM tuner.
INIT-XXXXXXXXX
Choices: DSP PARAM / ALL / CANCEL
Initializes various settings stored in this unit. You can select an initialization method from the following.
ID1 is set for both remote control and amplifier by default.
When you change the remote control ID, display
“Advance Setup” (see the previous section) and change the
ID for the amplifier too.
1
Press c CODE SET on the remote control using a pointed object such as the tip of a ballpoint pen.
b TRANSMIT blinks twice.
2
Press l SETUP on the remote control.
3
Enter the desired remote control ID code.
To switch to ID1:
Enter “5019” using s Numeric keys .
To switch to ID2:
Enter “5020” using s Numeric keys .
Once the remote control code is registered, b TRANSMIT blinks twice.
If it fails, b TRANSMIT blinks six times. Repeat from step 1.
y
•
Initializing the remote control code (see page 44) returns it to ID1.
DSP PARAM: All parameters of sound field programs
ALL: Reset this unit to initial factory settings
CANCEL: Cancellation of initialization
4
Press L STRAIGHT a few times to select the value you want to change.
The value selected here becomes effective when this unit is turned on the next time. You can change multiple settings by repeating steps 3 and 4.
5
Press A STANDBY/ON , turns off this system, and press A STANDBY/ON again.
The value set in step 3 becomes effective, and this unit turns on. When you select initialization in step 3, the initialization is performed.
45
En
APPENDIX
Troubleshooting
Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized
Yamaha dealer or service center.
General
Problem Cause Remedy
This unit fails to turn on or enters the standby mode soon after the power is turned on.
This unit cannot be turned off.
No sound.
No picture.
The power cable is not connected or the plug is not completely inserted.
(When this unit is turned back on and
“CHECK SP WIRES!” is displayed.) The protection circuitry has been activated because this unit was turned on while a speaker cable was shorted.
Connect the power cable properly to an AC wall outlet.
Make sure that all speaker cables between this unit and speakers are connected properly.
The internal microcomputer is frozen due to an external electric shock (such as lightning or excessive static electricity) or by a drop in power supply voltage.
Disconnect the power cable from the AC wall outlet, wait about 30 seconds and then plug it in again.
“Audio” in “1 HDMI” of Function Setup is set to “TV.”
A proper audio decoder is not selected.
Incorrect input or output cable connections.
No appropriate input source has been selected.
Speaker connections are not secure.
The volume is turned down or muted.
Signals this unit cannot reproduce are being input from a source component, such as a CD-ROM.
Select a choice for “Audio”
(Func. Setup
→
1 HDMI
→
Audio) other than “TV.”
Display the OPTION menu and set “Decoder Mode” to “Auto.”
Connect the cables properly. If the problem persists, the cables may be defective.
Select an appropriate input source with N INPUT l
/ h or the g Input selection keys on the remote control.
Secure the connections.
Turn up the volume.
Display Signal info of the option menu and check the input signal format.
If “No Signal” is displayed, check if the playback component is properly connected to this unit (or a proper input source is selected).
If “___” is displayed, the input signal in that format cannot be reproduced by this unit.
The HDMI components connected to this unit do not support the HDCP copy protection standards.
The composite output terminals are used to output a component video signal, or the
COMPONENT VIDEO jacks are used to output a composite video signal.
Non-standard video signals are input.
Connect HDMI components that support the HDCP copy protection standards.
An appropriate video input is not selected on the monitor.
Select an appropriate video input on the monitor.
Connect it to the COMPONENT OUT jacks or the composite output terminals and select an appropriate video input on the monitor.
Connect the monitor to this unit via the
COMPONENT OUT jacks or the composite output terminals.
See page
—
—
—
—
—
46
En
Troubleshooting
Problem
The sound suddenly goes off.
Sound is heard from the speaker on one side only.
Only the center speaker outputs substantial sound.
No sound is output from a specific speaker.
No sound is heard from the surround speakers.
No sound is heard from the subwoofer.
No sound is heard from the surround back speakers.
Cause Remedy
See page
— The protection circuitry has been activated because of a short circuit, etc.
The sleep timer has turned off this unit.
Check that the speaker wires are not touching each other and then turn this unit back on.
Turn on this unit, and play the source again.
The playback component or speakers are not connected properly.
The speaker level settings are incorrect.
When a monaural source sound field program is applied, sound of all channels are output from the center speaker for some surround decoders.
Output from that speaker is disabled.
Connect the cables properly. If the problem persists, the cables may be defective.
Adjust “B)Level” settings.
Try another sound field program.
The volume of that speaker is set to minimum in Speaker Setup in the Setup menu.
Check the Speaker indicators on the front panel display. If the corresponding indicator is turned off, try the following.
1) Change the input source to another one.
2) With the selected sound field program, sound is not output from that speaker. Select another sound field program.
3) “None” may have been selected for that speaker on this unit. Display Speaker Setup in the Setup menu and enables output of that speaker.
Display Speaker Setup in the Setup menu and adjust the volume (Manual Setup
→
B)Level).
This unit or speaker is malfunction.
Check the Speaker indicators on the front panel display. If the corresponding indicator lights up, connect another speaker and check if sound is output.
If sound is not output, this unit may be malfunction.
Press L STRAIGHT or the j STRAIGHT on the remote control to turn off the “STRAIGHT” mode.
This unit is in the “STRAIGHT” mode and a monaural source is being played back.
Sound may not be output from certain channels depending on input sources or sound field programs.
Try another sound field program.
“Bass Out” of “A)Config” in “Speaker
Setup” of the setup menu (Speaker
Setup
→
Manual Setup
→
A)Config) is set to “Front” when a Dolby Digital, DTS or
AAC signal is being played.
“Bass Out” of “A)Config” in “Speaker
Setup” of the setup menu (Speaker
Setup
→
Manual Setup
→
A)Config) is set to “SWFR” or “Front” when a 2-channel source is being played.
The source does not contain low frequency signals.
Set “Bass Out” to “SWFR” or “Both.”
Set “Bass Out” to “Both.”
“EXTD Surround” in the OPTION menu is set to “Off,” or an input signal does not contain a surround back flag with “EXTD
Surround” set to “Auto.”
Set “EXTD Surround” other than “Off” or “Auto.”
—
47
En
Troubleshooting
Problem Cause Remedy
The audio input sources cannot be played in the desired digital audio signal format.
Noise/hum noise is heard.
The connected component is not set to output the desired digital audio signals.
Set the playback component properly referring to its operating instructions.
Incorrect cable connection.
A DTS-CD is being played back.
Connect the audio cables properly. If the problem persists, the cables may be defective.
1) When only noise is output
If a DTS bitstream signal is not properly input to this unit, only noise is output. Connect the playback component to this unit by digital connection and play back the DTS-CD. If the condition is not improved, the problem may results from the playback component. Consult the manufacturer of the playback component.
2) When noise is output during playback or skip operation
Before playing back the DTS-CD, display the option menu after selecting the input source and set
“Decoder Mode” to “DTS.”
Set “Memory Guard” to “Off.” “Memory Guard!” is displayed and the setting cannot be changed.
This unit does not operate properly.
“CHECK SP WIRES!” appears on the front panel display.
There is noise interference from digital or radio frequency equipment.
The picture is disturbed.
This unit suddenly enters the standby mode.
“Memory Guard” in “Set Menu” is set to
“On.”
The internal microcomputer is frozen due to an external electric shock (such as lightning or excessive static electricity) or by a drop in power supply voltage.
Speaker cables are short-circuited.
Disconnect the power cable from the AC wall outlet, wait about 30 seconds and then plug it in again.
Make sure all speaker cables are connected correctly.
This unit is too close to other digital or radio frequency equipment.
The video software is copy-protected.
The internal temperature becomes too high and the overheat protection circuitry has been activated.
Move this unit further away from such equipment.
Wait about 1 hour for this unit to cool down and then turn it back on.
See page
—
—
—
—
—
HDMI
Problem
No picture or sound.
Cause Remedy
The number of the connected HDMI components is over the limit.
The connected HDMI component does not support high-bandwidth digital copyright protection (HDCP).
Disconnect some of the HDMI components.
Connect an HDMI component that supports HDCP.
See page
—
4 8
En
Troubleshooting
Tuner (FM/AM)
Problem Cause Remedy
FM
FM stereo reception is noisy.
AM
The desired station cannot be tuned into with the automatic tuning method.
There are continuous crackling and hissing noises.
There are buzzing and whining noises.
You are too far from the station transmitter or the input from the antenna is weak.
There is distortion, and clear reception cannot be obtained even with a good FM antenna.
The desired station cannot be tuned into with the automatic tuning method.
There is multi-path interference.
You are in an area far from a station or an input from the antenna is weak.
The signal is weak or the antenna connections are loose.
Replace an outdoor antenna with more sensitive multi element antenna.
Tune in manually or by direct frequency tuning.
Adjust the AM loop antenna orientation.
Use the manual tuning method.
Supplied AM loop antenna is not connected.
The noises may be caused by lightning, fluorescent lamps, motors, thermostats and other electrical equipment.
A TV set is being used nearby.
Check the antenna connections.
Replace the outdoor antenna with a more sensitive multi-element antenna.
Switch to monaural mode.
Adjust the antenna height or orientation, or place it in a different location.
Connect the AM loop antenna correctly even if you use an outdoor antenna.
It is difficult to completely eliminate noise, but it can be reduced by installing and properly grounding an outdoor AM antenna.
Move this unit away from the TV set.
See page
—
—
—
—
49
En
Troubleshooting
Remote control
Problem
The remote control does not work or function properly.
Cause
Wrong distance or angle.
Remedy
The remote control will function within a maximum range of 6 m (20 ft) and no more than 30 degrees offaxis from the front panel.
Adjust the lighting angle or reposition this unit.
Direct sunlight or lighting (from an inverter type of fluorescent lamp, strobe light, etc.) is striking the remote control sensor of this unit.
The batteries are weak.
The remote control ID of the remote control and this unit do not match.
The remote control code is not correctly set.
Replace all batteries.
Match the remote control ID of this unit and the remote control.
Set the remote control code correctly using “List of remote control codes” at the end of this manual.
Try setting another code of the same manufacturer using “List of remote control codes” at the end of this manual.
If this unit does not work when you press n Cursor , do the following.
When the key does not work during DVD disc menu operation: press the g Input selection keys on the remote control again.
When the key does not work during OPTION menu/
SETUP menu operation: press the key applicable for the current menu operation again.
Even if the remote control code is correctly set, there are some models that do not respond to the remote control.
See page
—
—
iPod™
Note
•
Problem Cause Remedy
See page
Loading...
Connect error
This unit is in the middle of recognizing the connection with your iPod.
This unit is in the middle of acquiring song lists from your iPod.
There is a problem with the signal path from your iPod to this unit.
Unknown iPod
Turn off this unit and reconnect the Yamaha iPod universal dock to the DOCK terminal of this unit.
Remove your iPod in the Yamaha iPod universal dock and then place it back in the dock.
This unit supports iPod Touch, iPod (Click Wheel), iPod nano and iPod mini.
— iPod Connected
Disconnected
The iPod being used is not supported by this unit.
Your iPod is properly placed in the
Yamaha iPod universal dock.
Your iPod is removed from the Yamaha iPod universal dock.
Place your iPod in the Yamaha iPod universal dock.
50
En
Problem
Unable to play
Cause
This unit cannot play back the songs currently stored on your iPod.
Remedy
Check that the songs currently stored on your iPod are playable.
Store some other playable music files on your iPod.
Troubleshooting
See page
—
—
Bluetooth™
Problem
Searching...
Completed
Canceled
BT Connected
BT Disconnected
Cause
The Bluetooth wireless audio receiver and the Bluetooth component are in the middle of the pairing.
The Bluetooth wireless audio receiver and the Bluetooth component are in the middle of establishing the connection.
The pairing is completed.
The pairing is canceled.
The connection between the Yamaha
Bluetooth wireless audio receiver and the
Bluetooth component is established.
The Bluetooth component is disconnected from the Yamaha Bluetooth wireless audio receiver.
Remedy
Auto Setup (YPAO)
Notes
• If the “ERROR” or “WARNING” message appears, resolve the problem and then run “Auto Setup” again.
• Warning message “W-2” or “W-3” indicates that the adjusted settings may not be optimal.
• Depending on the speakers, warning message “W-1” may appears even if the speaker connections are correct.
• If error message “E-10” occurs repeatedly, contact a qualified Yamaha service center.
Before Auto Setup
Error message
Connect MIC!
Unplug HP!
Memory Guard!
During Auto Setup
Cause Remedy
Optimizer microphone is not connected.
Connect the supplied optimizer microphone to the
OPTIMIZER MIC jack on the front panel.
Headphones are connected.
Unplug the headphones.
The parameters of this unit are protected.
Set “Memory Guard” to “Off.”
Error message
E-1:NO FRONT SP
E-2:NO SUR. SP
E-4:SBR->SBL
Cause Remedy
Front L/R channel signals are not detected.
Only a signal from one of the surround channels are detected.
Only right surround back channel signal is detected.
Check the front L/R speaker connections.
Check the surround L/R speaker connections.
If you connect only one surround back speaker, connect it to the L-side terminal.
See page
See page
See page
—
51
En
Troubleshooting
Error message
E-5:NOISY
E-6:CHECK SUR.
E-7:NO MIC
E-8:NO SIGNAL
Cause
Measurement cannot be performed accurately due to loud ambient noise.
When using surround back speakers, you need to connect surround L/R speakers.
Do not touch the optimizer microphone during “Auto
Setup.”
Remedy
Try running “Auto Setup” in a quiet environment.
Turn off noisy electric equipment like air conditioners or move them away from the optimizer microphone.
Surround back speakers are connected, though surround L/R speakers are not.
The optimizer microphone was unplugged during the “Auto Setup” procedure.
The optimizer microphone does not detect test tones.
Check whether the microphone is properly placed.
Check whether the speakers are properly placed and connected.
The optimizer microphone or OPTIMIZER MIC jack may be defective. Contact the nearest Yamaha dealer or service center.
If a monitor such as a TV is connected to this unit via HDMI connection, sound may not be output from this unit due to the HDMI control function. In such a case, change the monitor setting, for example, change the sound output setting to an amplifier so that sound is output from this unit.
Run “Auto Setup” again.
E-9:USER CANCEL “Auto Setup” was cancelled due to an inappropriate user operation.
E-10:INTERNAL ERROR An internal error occurred.
Run “Auto Setup” again.
After Auto Setup
See page
—
—
—
See page
Error message Cause Remedy
W-1:OUT OF PHASE Speaker polarity is not correct. This message may appear depending on the speakers even when the speakers are connected correctly.
W-2:OVER 24m (80ft) The distance between the speaker and the listening position is over 24 m (80 ft).
W-3:LEVEL ERROR The difference of volume level among speakers is excessive.
If a warning message related to the surround back speaker is displayed, the volume or right and left balance of the external amplifier may not be properly set.
Check the polarities (+, –) of the displayed speaker.
If they are correct, the speakers work properly even when this message is displayed.
Bring the speaker within 24 m (80 ft.) area around the listening position.
Recheck the speaker positions and make sure all speakers are placed in a similar environment.
Check the polarities (+, –) of the speakers.
We recommended that you use speakers with the same or similar specifications.
Adjust the output volume of the subwoofer.
Check if the volume or balance of the external amplifier is proper.
—
—
—
—
—
52
En
Glossary
â– Audio and video synchronization (lip sync)
Lip sync, an abbreviation for lip synchronization, is a technical term that involves both a problem and a capability of maintaining audio and video signals synchronized during post-production and transmission.
Whereas the audio and video latency requires complex end-user adjustments, HDMI version 1.3 incorporates an automatic audio and video syncing capability that allows devices to perform this synchronization automatically and accurately without user interaction.
â– Bi-amplification connection
A bi-amplification connection uses two amplifiers for a speaker.
One amplifier is connected to the woofer section of a loudspeaker while the other is connected to the combined mid and tweeter section.
With this arrangement each amplifier operates over a restricted frequency range. This restricted range presents each amplifier with a much simpler job and each amplifier is less likely to influence the sound in some way.
â–
Component video signal
With the component video signal system, the video signal is separated into the Y signal for the luminance and the P B and P R signals for the chrominance. Color can be reproduced more faithfully with this system because each of these signals is independent. The component signal is also called the “color difference signal” because the luminance signal is subtracted from the color signal. A monitor with component input jacks is required in order to output component signals.
â– Composite video signal
With the composite video signal system, the video signal is composed of three basic elements of a video picture: color, brightness and synchronization data. A composite video jack on a video component transmits these three elements combined.
â–
Deep Color
Deep Color refers to the use of various color depths in displays, up from the 24-bit depths in previous versions of the HDMI specification.
This extra bit depth allows HDTVs and other displays go from millions of colors to billions of colors and eliminate on-screen color banding for smooth tonal transitions and subtle gradations between colors. The increased contrast ratio can represent many times more shades of gray between black and white. Also Deep Color increases the number of available colors within the boundaries defined by the
RGB or YCbCr color space.
â– Dolby Digital
Dolby Digital is a digital surround sound system that gives you completely independent multi-channel audio. With 3 front channels
(front L/R and center), and 2 surround stereo channels, Dolby Digital provides 5 full-range audio channels. With an additional channel especially for bass effects, called LFE (Low Frequency Effect), the system has a total of 5.1-channels (LFE is counted as 0.1 channel). By using 2-channel stereo for the surround speakers, more accurate moving sound effects and surround sound environment are possible than with Dolby Surround. The wide dynamic range from maximum to minimum volume reproduced by the 5 full-range channels and the precise sound orientation generated using digital sound processing provide listeners with unprecedented excitement and realism.
With this unit, any sound environment from monaural up to a 5.1channel configuration can be freely selected for your enjoyment.
â– Dolby Digital Surround EX
Dolby Digital EX creates 6 full-bandwidth output channels from 5.1channel sources.
For the best results, Dolby Digital EX should be used with movie sound tracks recorded with Dolby Digital Surround EX. With this additional channel, you can experience more dynamic and realistic moving sound especially with scenes with “fly-over” and “flyaround” effects.
â– Dolby Digital Plus
Dolby Digital Plus is an advanced audio technology developed for high-definition programming and media including HD broadcasts, and Blu-ray Disc. Selected as an optional audio standard for Blu-ray
Disc, this technology delivers multichannel sound with discrete channel output. Supporting bitrates up to 6.0 Mbps, Dolby Digital
Plus can carry up to 7.1 discreet audio channels simultaneously.
Supported by HDMI version 1.3 and designed for the optical disc players and AV receivers/amplifiers of the future, Dolby Digital Plus also remains fully compatible with the existing multichannel audio systems that incorporate Dolby Digital.
â– Dolby Pro Logic II
Dolby Pro Logic II is an improved technique used to decode vast numbers of existing Dolby Surround sources. This new technology enables a discrete 5-channel playback with 2 front left and right channels, 1 center channel, and 2 surround left and right channels instead of only 1 surround channel for conventional Pro Logic technology. There are three modes available: “Music mode” for music sources, “Movie mode” for movie sources and “Game mode” for game sources.
â– Dolby Pro Logic IIx
Dolby Pro Logic IIx is a new technology enabling discrete multichannel playback from 2-channel or multi-channel sources.
There are three modes available: “Music mode” for music sources,
“Movie mode” for movie sources (for 2-channel sources only) and
“Game mode” for game sources.
â–
Dolby Surround
Dolby Surround is widely used with nearly all video tapes and laser discs, and in many TV and cable broadcasts as well. Dolby Surround uses a 4-channel analog recording system to reproduce realistic and dynamic sound effects: 2 front left and right channels (stereo), a center channel for dialog (monaural), and a surround channel for special sound effects (monaural). The surround channel reproduces sound within a narrow frequency range. The Dolby Pro Logic decoder built into this unit employs a digital signal processing system that automatically stabilizes the volume on each channel to enhance moving sound effects and directionality.
â–
Dolby TrueHD
Dolby TrueHD is an advanced lossless audio technology developed for high-definition disc-based media including Blu-ray Disc. Selected as an optional audio standard for Blu-ray Disc, this technology delivers sound that is bit-for-bit identical to the studio master, offering a high-definition home theater experience.
Supporting bitrates up to 18.0 Mbps, Dolby TrueHD can carry up to 8 discrete channels of 24-bit/96 kHz audio simultaneously.
Dolby TrueHD also remains fully compatible with the existing multichannel audio systems and retains the metadata capability of
Dolby Digital, allowing dialog normalization and dynamic range control.
53
En
Glossary
â– DSD
Direct Stream Digital (DSD) technology stores audio signals on digital storage media, such as Super Audio CDs. Using DSD, signals are stored as single bit values at a high-frequency sampling rate of
2.8224 MHz, while noise shaping and oversampling are used to reduce distortion, a common occurrence with very high quantization of audio signals. Due to the high sampling rate, better audio quality can be achieved than that offered by the PCM format used for normal audio CDs. The frequency is equal to or higher than 100 kHz and the dynamic range is 120 dB. This unit can transmit or receive DSD signals via the HDMI jack.
â– DTS 96/24
DTS 96/24 offers an unprecedented level of audio quality for multichannel sound on DVD video, and is fully backward-compatible with all DTS decoders. “96” refers to a 96 kHz sampling rate compared to the typical 48 kHz sampling rate. “24” refers to 24-bit word length.
DTS 96/24 offers sound quality transparent to the original 96/24 master, and 96/24 5.1-channel sound with full-quality full-motion video for music programs and motion picture soundtracks on DVD video.
â– DTS Digital Surround
DTS digital surround was developed to replace the analog soundtracks of movies with a 5.1-channel digital sound track, and is now rapidly gaining popularity in movie theaters around the world. DTS, Inc. has developed a home theater system so that you can enjoy the depth of sound and natural spatial representation of DTS digital surround in your home. This system produces practically distortion-free 6-channel sound (technically, front left and right, center, surround left and right, and LFE 0.1 (subwoofer) channels for a total of 5.1 channels). This unit incorporates a DTS-ES decoder that enables 6.1-channel reproduction by adding the surround back channel to the existing 5.1channel format.
â–
DTS Express
This is an audio format for next-generation optical discs such as Bluray discs. It uses optimized low bit rate signals for network streaming.
In the case of a Blu-ray disc, this format is used with secondary audio, enabling you to enjoy the commentary of the movie producer via the
Internet while playing the main program.
â– DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is a high resolution audio technology developed for high-definition disc-based media including
Blu-ray Disc. Selected as an optional audio standard for Blu-ray Disc, this technology delivers sound that is virtually indistinguishable from the original, offering a high-definition home theater experience.
Supporting bitrates up to 6.0 Mbps for Blu-ray Disc, DTS-HD High
Resolution Audio can carry up to 7.1 discrete channels of 24-bit/96 kHz audio simultaneously.
DTS-HD High Resolution Audio also remains fully compatible with the existing multichannel audio systems that incorporate DTS Digital
Surround.
â– DTS-HD Master Audio
DTS-HD Master Audio is an advanced lossless audio technology developed for high-definition disc-based media including Blu-ray
Disc. Selected as an optional audio standard for Blu-ray Disc, this technology delivers sound that is bit-for-bit identical to the studio master, offering a high-definition home theater experience.
Supporting bitrates up to 24.5 Mbps for Blu-ray Disc, DTS-HD
Master Audio can carry up to 7.1 discrete channels of 24-bit/96 kHz audio simultaneously. Supported by HDMI version 1.3 and designed for the optical disc players and AV receivers/amplifiers of the future,
DTS-HD Master Audio also remains fully compatible with the existing multichannel audio systems that incorporate DTS Digital
Surround.
â– HDMI
HDMI (High-Definition Multimedia Interface) is the first industrysupported, uncompressed, all-digital audio/video interface. Providing an interface between any source (such as a set-top box or AV receiver) and an audio/video monitor (such as a digital television), HDMI supports standard, enhanced or high-definition video as well as multichannel digital audio using a single cable. HDMI transmits all ATSC
HDTV standards and supports 8-channel digital audio, with bandwidth to spare to accommodate future enhancements and requirements.
When used in combination with HDCP (High-bandwidth Digital
Content Protection), HDMI provides a secure audio/video interface that meets the security requirements of content providers and system operators. For further information on HDMI, visit the HDMI website at “http://www.hdmi.org/.”
â– LFE 0.1 channel
This channel reproduces low-frequency signals. The frequency range of this channel is from 20 Hz to 120 Hz. This channel is counted as
0.1 because it only enforces a low-frequency range compared to the full-range reproduced by the other 5/6 channels in Dolby Digital or
DTS 5.1/6.1-channel systems.
â–
Neo:6
Neo:6 decodes the conventional 2-channel sources for 6- channel playback by the specific decoder. It enables playback with the fullrange channels with higher separation just like digital discrete signal playback. There are two modes available: “Music mode” for music sources and “Cinema mode” for movie sources.
â– PCM (Linear PCM)
Linear PCM is a signal format under which an analog audio signal is digitized, recorded and transmitted without using any compression.
This is used as a method of recording CDs and DVD audio. The PCM system uses a technique for sampling the size of the analog signal per very small unit of time. Standing for “Pulse Code Modulation,” the analog signal is encoded as pulses and then modulated for recording.
â– Sampling frequency and number of quantized bits
When digitizing an analog audio signal, the number of times the signal is sampled per second is called the sampling frequency, while the degree of fineness when converting the sound level into a numeric value is called the number of quantized bits. The range of rates that can be played back is determined based on the sampling rate, while the dynamic range representing the sound level difference is determined by the number of quantized bits. In principle, the higher the sampling frequency, the wider the range of frequencies that can be played back, and the higher the number of quantized bits, the more finely the sound level can be reproduced.
â– x.v.Color
A color space standard supported by HDMI version 1.3. It is a more extensive color space than sRGB, and allows the expression of colors that could not be expressed before. While remaining compatible with the color gamut of sRGB standards, “x.v.Color” expands the color space and can thus produce more vivid, natural images. It is particularly effective for still pictures and computer graphics.
54
En
Sound field program information
â– CINEMA DSP
Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best felt in a theater having many speakers designed for acoustic effects. Since home conditions, such as room size, wall material, number of speakers, and so on, can differ so widely, it is inevitable that there are differences in the sound heard.
Based on a wealth of actually measured data, Yamaha CINEMA DSP provides the audiovisual experience of a movie theater in the listening room of your own home by using the Yamaha original sound field technology combined with various digital audio systems.
â– SILENT CINEMA
Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for headphones have been set for each sound field so that accurate representations of all the sound field programs can be enjoyed on headphones.
â– Virtual CINEMA DSP
Yamaha has developed a Virtual CINEMA DSP algorithm that allows you to enjoy DSP sound field surround effects even without any surround speakers by using virtual surround speakers. It is even possible to enjoy Virtual CINEMA DSP using a minimal two-speaker system that does not include a center speaker.
â– Compressed Music Enhancer
The Compressed Music Enhancer feature of this unit enhances your listening experience by regenerating the missing harmonics in a compression artifact. As a result, flattened complexity due to the loss of high-frequency fidelity as well as lack of bass due to the loss of low-frequency bass is compensated, providing improved performance of the overall sound system.
Information on HDMI™
â– HDMI signal compatibility
Audio signals
Audio signal types
2ch Linear PCM
Multi-ch Linear PCM
DSD
Bitstream
Audio signal formats
2ch, 32-192 kHz, 16/20/24 bit
8ch, 32-192 kHz, 16/20/24 bit
2/5.1ch, 2.8224 MHz, 1 bit
Dolby Digital, DTS
Bitstream (High definition audio) Dolby TrueHD, Dolby Digital Plus, DTS-HD
Master Audio, DTS-HD High Resolution Audio,
DTS Express
Compatible media
CD, DVD-Video, DVD-Audio, etc.
DVD-Audio, Blu-ray Disc, HD DVD, etc.
SA-CD, etc.
DVD-Video, etc.
Blu-ray Disc, HD DVD, etc.
y
• If the input source component can decode the bitstream audio signals of audio commentaries, you can play back the audio sources with the audio commentaries mixed down by using the DIGITAL INPUT OPTICAL (or COAXIAL) connections.
• Refer to the supplied instruction manuals of the input source component, and set the component appropriately.
Notes
• When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output depending on the type of the DVD player.
• This unit is not compatible with HDCP-incompatible HDMI or DVI components.
• To decode audio bitstream signals on this unit, set the input source component appropriately so that the component outputs the bitstream audio signals directly (does not decode the bitstream signals on the component). Refer to the supplied instruction manuals for details.
• This unit is not compatible with the audio commentary features (for example, the special audio contents downloaded via Internet) of Blu-ray Disc or HD
DVD. This unit does not play back the audio commentaries of the Blu-ray Disc or HD DVD contents.
Video signals
This unit is compatible with the video signals of the following resolutions:
• 480i/60 Hz
• 576i/50 Hz
• 480p/60 Hz
• 576p/50 Hz
• 720p/60 Hz, 50 Hz
• 1080i/60 Hz, 50 Hz
• 1080p/60 Hz, 50 Hz, 24 Hz
55
En
Additional information
About the HDMI control function
This unit supports the HDMI control function.
When a TV that supports the HDMI control function is connected with this unit via the HDMI connection, the following operations of this unit can be controlled with the
TV remote control (except for some TVs).
• Switching between on and standby (linked to the TV)
• Volume control (up/down, mute)
• Switching the sound output between a TV and this unit.
y
• If you connect this unit to an HDMI control-compatible DVD player or
Blu-ray Disc player via HDMI, you can also control the connected component in synchronization with this unit (except some models).
You can turn on or off the HDMI control function from the following setup menu item.
Setup menu
Function Setup
→
1 HDMI
→
Control
Control
Choices: On / Off *
Selects on or off of HDMI control function when a component that supports the HDMI control function is connected with this unit.
On
Off
Enables the HDMI control function.
Disables the HDMI control function.
y
• When the HDMI control function is enabled, display of the following items in “1 HDMI” of the setup menu turns off.
– Standby Through
– Audio Output
• During standby, the HDMI THROUGH indicator on the front panel display lights up under the following conditions:
– the HDMI control function is enabled
– An HDMI signal input to this unit passes through this unit and output.
See “Standby Through” or “Standby” (Setup menu
→
Function setup
→
1 HDMI) on the manual for the details on the pass-through output of an HDMI signal.
• While this unit is on standby with the HDMI control turned on, it consumes 1 to 3W of power depending on a condition of an HDMI signal passing through this unit.
Using the HDMI control function
When you use the HDMI control function, do the following referring to the operating instructions of the TV.
• Turn on the HDMI control function on the TV.
• Connect the TV to this unit following the instructions for connecting the TV to an AV amplifier.
y
• The HDMI control-compatible components include Panasonic VIERA
Link compatible TV, DVD player/recorder and Blu-ray Disc player.
• When a DVD recorder/Blu-ray recorder/HD DVD recorder that supports the HDMI control function is connected via the HDMI connection, its operations are also linked to those of this unit. For details, refer to its operating instructions.
• We recommend that you use a TV, DVD recorder, Blu-ray recorder and
HD DVD recorder of the same manufacturer.
1
Connect a TV that supports the HDMI control function to this unit via the HDMI connection.
2
Turn on all components connected to this unit via the HDMI connection.
For details on operations of external components, refer to their operating instructions.
3
Check the settings of those components and enable the HDMI control function.
Bring up to setup menu, and set “Control” to “On.”
For details on settings of the external components, refer to their operating instructions.
y
• You do not need to do step 1 through 3 from the second time.
4
Turn off the TV.
5
Check if all components connected via the
HDMI connection except for the TV are turned on.
If they are turned off, turn them on.
6
Turn on the TV.
7
Set the input of the TV according to the component connected to this unit such as
[HDMI].
8
Set the input of this unit to the DVD recorder or Blu-ray recorder, and check if images from the recorder appear normal.
9
Perform operations with the TV remote control, such as switching this unit between on and standby, adjusting the volume and switching the sound output components.
y
• If this unit does not work, check the following. It may also work normally after turning it off and back on or unplugging it and plugging it back in.
– “Control” is set to “On.”
– The HDMI control function is enabled in the TV settings (refer to the operating instructions of the TV).
Note
• If your monitor supports the HDMI control function, the scene of this unit is automatically set to “TV” according to switching of input on the monitor when the HDMI control function of this unit and the monitor are turned on. AV1 input is assigned to “TV” by default. By connecting an audio output terminal of the monitor to an optical digital terminal of
AV1, you can watch a movie or a TV program right away. When the audio output of the monitor is connected to AV2-6, AUDIO1-2, and V-
AUX assign the input source for that terminal to “TV” with the SCENE function.
56
En
Specifications
AUDIO SECTION
• Minimum RMS Output Power for Front, Center, Surround,
Surround back
[U.S.A. and Canada models]
1 kHz, 0.9% THD, 8
Ω
......................................................... 105 W
[Other models]
1 kHz, 0.9% THD, 6
Ω
......................................................... 105 W
• Dynamic Power (IHF)
[U.S.A. and Canada models]
Front Speakers 8/6/4/2
Ω
.................................110/130/160/180 W
[Other models]
Front Speakers 6/4/2
Ω
...........................................100/130/150 W
• Maximum Useful Output Power (JEITA) [China, Korea, General and Asia models]
1 kHz, 10% THD, 6
Ω
.......................................................... 140 W
• Maximum Output Power [U.K., Europe and Asia models]
1 kHz, 0.7% THD, 4
Ω
......................................................... 120 W
• Dynamic Headroom [U.S.A. and Canada models]
8
Ω
........................................................................................ 0.2 dB
• IEC Output Power [U.K., Europe and Asia models]
Front Speakers 1 kHz, 0.9% THD, 8
Ω
................................ 105 W
• Input Sensitivity/Input Impedance
AV5, etc. ................................................................. 200 mV/47 k
Ω
• Maximum Input Voltage
AV5, etc. (1 kHz, 0.5% THD) .................................. 2.3 V or more
• Rated Output Voltage/Output Impedance
AUDIO OUT ......................................................... 200 mV/1.2 k
Ω
PRE OUT....................................................................1.0 V/1.2 k
Ω
SUBWOOFER (2ch Stereo & Front: Small)
.................................................................................1.0 V/1.2 k
Ω
• Headphone Jack Rated Output/Impedance
AV5, etc. (1 kHz, 50 mV, 8
Ω
) ............................... 100 mV/470
Ω
• Frequency Response
AV5 to FRONT .................................. 10 Hz to 100 kHz, +0/–3 dB
• Total Harmonic Distortion
AV5, etc. to FRONT, Pure Direct
[U.S.A. and Canada models]
(1 kHz, 50 W, 8
Ω
) ................................................. 0.06% or less
[Other models]
(1 kHz, 50 W, 6
Ω
) ................................................. 0.06% or less
• Signal to Noise Ratio (IHF-A Network)
AV5, etc. Input Shorted (250 mV to Front Speakers)
............................................................................ 100 dB or more
• Residual Noise (IHF-A Network)
Front Speakers ......................................................... 150 µV or less
• Channel Separation (1 kHz/10 kHz)
AV5, etc. (5.1 k
Ω
shortened) .........................60 dB/45 dB or more
• Volume Control.................................... MUTE / –80 dB to +16.5 dB
• Tone Control (Front Speakers)
BASS Boost/Cut ................................................... ±10 dB at 50 Hz
BASS Turnover Frequency .................................................. 350 Hz
TREBLE Boost/Cut ............................................ ±10 dB at 20 kHz
TREBLE Turnover Frequency............................................ 3.5 kHz
• Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz)
H.P.F. (Front, Center, Surround, Surround back: Small)
..................................................................................... 12 dB/oct.
L.P.F. (Subwoofer) .......................................................... 24 dB/oct.
VIDEO SECTION
• Video Signal Type (Gray Back)
[U.S.A., Canada, Korea and General models] ...................... NTSC
[Other models] ......................................................................... PAL
• Signal Level
Composite ...................................................................1 Vp-p/75
Ω
Component ................... 1 Vp-p/75
Ω
(Y), 0.7 Vp-p/75
Ω
(C B /C R )
• Maximum Input Level............................................ 1.5 Vp-p or more
• Signal to Noise Ratio .................................................. 50 dB or more
• Frequency Response [MONITOR OUT]
Component .................................................5 Hz to 60 MHz, –3 dB
FM SECTION
• Tuning Range
[U.S.A. and Canada models]............................. 87.5 to 107.9 MHz
[Asia and General models]..........87.5/87.50 to 108.0/108.00 MHz
[Other models] .............................................. 87.50 to 108.00 MHz
• 50 dB Quieting Sensitivity (IHF)
Mono ...................................................................3.0 µV (20.8 dBf)
• Signal to Noise Ratio (IHF)
Mono/Stereo................................................................74 dB/69 dB
• Harmonic Distortion (1 kHz)
Mono/Stereo......................................................................0.3/0.3%
• Antenna Input (unbalanced)....................................................... 75
Ω
AM SECTION
• Tuning Range
[U.S.A. and Canada models]................................ 530 to 1710 kHz
[Asia and General models]................... 530/531 to 1710/1611 kHz
[Other models] ..................................................... 531 to 1611 kHz
GENERAL
• Power Supply
[U.S.A. and Canada models]................................AC 120 V, 60 Hz
[General models]............... AC 110/120/220/230–240 V, 50/60 Hz
[China model] ......................................................AC 220 V, 50 Hz
[Korea model] ......................................................AC 220 V, 60 Hz
[Australia model] .................................................AC 240 V, 50 Hz
[U.K. and Europe models] ...................................AC 230 V, 50 Hz
[Asia models] ...................................AC 220/230–240 V, 50/60 Hz
• Power Consumption
[U.S.A. and Canada models]................................... 270 W/320 VA
[Other models] ..................................................................... 280 W
• Standby Power Consumption
Standby through off.................................................... 0.2 W or less
Standby through on ....................................................... 3 W or less
• Dimensions (W x H x D) .................................. 435 x 151 x 364 mm
(17-1/8 x 6 x 14-3/8 in)
• Weight ...................................................................... 8.4 kg (18.5 lbs)
* Specifications are subject to change without notice.
57
En
â– Numerics
1 Dynamic Range, sound setup ..................... 41
1 HDMI, function setup ................................. 42
2 Display, function setup ............................... 42
2 Lipsync, sound setup .................................. 41
2ch Stereo, sound field program .................... 25
3 Volume, function setup .............................. 42
4 Input Rename, function setup ..................... 43
5.1-channel speaker layout ............................ 10
6.1-channel speaker layout ............................ 10
7.1-channel speaker layout ............................ 10
7ch Enhancer, sound field program ............... 26
7ch Stereo, sound field program .................... 26
â–
A
A)Config, speaker setup ................................ 39
Action Game, sound field program ............... 25
Adjusting high frequency sound .................... 22
Adjusting low frequency sound ..................... 22
Adptv DRC, 3 Volume, function setup ......... 42
Advanced setup .............................................. 45
Adventure, sound field program .................... 24
AM antenna connection ................................. 17
AM tuning ..................................................... 28
AM, front panel ............................................... 4
ANTENNA jack, rear panel ............................ 5
AUDIO 1/2, rear panel .................................... 5
Audio and video player connection ............... 15
AUDIO jack ................................................... 13
Audio jack ..................................................... 13
AUDIO L/R jack, front panel .......................... 4
AUDIO OUT, rear panel ................................. 5
Audio player connection ................................ 16
Audio, 1 HDMI, function setup ..................... 42
Auto Preset, OPTION menu .......................... 35
Auto Setup (YPAO), troubleshooting ........... 51
Auto, 2 Lipsync, sound setup ........................ 42
Automatic setup ............................................. 18
AV 1-6, rear panel ........................................... 5
AV OUT, rear panel ........................................ 5
â– B
B)Level, speaker setup .................................. 41
Basic operation, setup menu .......................... 39
Bass Out, A)Config, speaker setup ................ 39
Bluetooth component playback ..................... 32
Bluetooth wireless audio receiver connection ................................................. 16
Bluetooth, troubleshooting ............................ 51
â–
C
C)Distance, speaker setup .............................. 41
C.Image, decoder parameter .......................... 37
Cellar Club, sound field program .................. 25
Center speaker ............................................... 10
Center width, decoder parameter ................... 37
Center, A)Config, speaker setup .................... 40
Center, C)Distance, speaker setup ................. 41
Chamber, sound field program ...................... 25
CINEMA DSP indicator, front panel display ...................................... 6
CINEMA DSP parameter .............................. 36
Clear Preset, OPTION menu ......................... 35
COAXIAL jack .............................................. 13
CODE SET, remote control ............................. 7
COMPONENT VIDEO jack ......................... 13
Connect, OPTION menu ............................... 35
Connecting AM antenna ................................ 17
Connecting audio and video player ............... 15
Connecting audio player ................................ 16
Connecting FM antenna ................................ 17
Connecting iPod universal dock .................... 16
Connecting power cable ................................ 17
Connecting projector ..................................... 14
Index
Connecting set-top box ..................................15
Connecting speaker ........................................11
Connecting speaker cable ...............................12
Connecting the AC power cable ....................17
Connecting the surround back speakers .........11
Connecting TV monitor .................................14
Connection .....................................................10
Controlling other component, remote control ...........................................44
Crossover, A)Config, speaker setup ...............40
CT Level, sound field parameter ....................36
Cursor indicator, front panel display ................6
Cursors k / n / l / h , remote control ............7
â–
D
D)Equalizer, speaker setup .............................41
Decoder Mode, OPTION menu .....................34
Decoder parameter .........................................37
Dimension, decoder parameter .......................37
Dimmer, 2 Display, function setup ................42
DIRECT, front panel ........................................4
Direct, sound field parameter .........................36
Disconnect, OPTION menu ...........................35
DISPLAY, remote control ...............................7
Displaying input signal information ..............23
DOCK terminal, rear panel ..............................5
Drama, sound field program ..........................25
DSP Level, sound field parameter .................36
DSP Parameter, Setup menu ..........................43
â– E
E)Test Tone, speaker setup ............................41
Editing sound field program ..........................36
Editing surround decoder ...............................36
EFCT LVL, sound field parameter ................37
ENTER, remote control ...................................7
EQ Select, D)Equalizer, speaker setup ..........41
EXTD Surround, OPTION menu ...................34
External component operation key, remote control .............................................7
â–
F
FL Scroll, 2 Display, function setup ..............42
FM antenna connection ..................................17
FM Mode, OPTION menu .............................34
FM tuning .......................................................28
FM, front panel ................................................4
Frequency tuning ............................................28
Front L, C)Distance, speaker setup ................41
Front left speaker ...........................................10
Front panel .......................................................4
Front panel display ...........................................6
Front panel display, front panel .......................4
Front R, C)Distance, speaker setup ................41
Front right speaker .........................................10
Front, A)Config, speaker setup ......................40
Function setup, setup menu ............................42
â– H
Hall in Munich, sound field program .............25
Hall in Vienna, sound field program ..............25
HDMI Auto, 2 Lipsync, sound setup .............41
HDMI indicator, front panel display ................6
HDMI information .........................................55
HDMI jack .....................................................13
HDMI OUT/HDMI 1-4, rear panel ..................5
HDMI THROUGH, front panel .......................4
HDMI, troubleshooting ..................................48
Headphones using ..........................................22
Hi-fi sound playback ......................................22
High frequency sound adjustment ..................22
â–
I
INFO, front panel .............................................4
INFO, remote control .......................................7
INIT, advanced setup .....................................45
Initialize setting, advanced setup ................... 45
IniVol, 3 Volume, function setup .................. 43
INPUT l / h , front panel .............................. 4
Input selection key, remote control ................. 7
Input signal information displaying ............... 23
Input source registration ................................ 21
Installing batteries, remote control .................. 9
iPod playback ................................................ 30
iPod universal dock connection ..................... 16
iPod, troubleshooting ..................................... 50
â–
L
Low frequency sound adjustment .................. 22
â– M
Manual, 2 Lipsync, sound setup .................... 42
MaxVol, 3 Volume, function setup ............... 43
Memory guard, setup menu ........................... 43
MEMORY, front panel .................................... 4
MONITOR OUT, rear panel ............................ 5
Mono Movie, sound field program ................ 25
Multi information display, front panel display ...................................... 6
Music Video, sound field program ................ 25
MUTE indicator, front panel display ............... 6
MUTE, remote control .................................... 7
â–
N
Numeric key, remote control ........................... 7
â– O
OPTICAL jack ............................................... 13
OPTIMIZER MIC jack, front panel ................ 4
OPTION menu ............................................... 33
OPTION, remote control ................................. 7
â–
P
Pairing Bluetooth components ....................... 32
Pairing, OPTION menu ................................. 35
Panorama, decoder parameter ........................ 37
PHONES jack, front panel ............................... 4
Placing speaker .............................................. 10
PORTABLE jack, front panel ......................... 4
Power cable connection ................................. 17
Power Cable, rear panel ................................... 5
POWER, remote control .................................. 7
PRE OUT, rear panel ....................................... 5
PRESET l / h , front panel ........................... 4
Preset tuning .................................................. 28
PROGRAM l / h , front panel ...................... 4
Projector connection ...................................... 14
â– R
Registering input source ................................ 21
Registering sound field program ................... 21
Remote control ................................................ 7
Remote control code resetting ....................... 44
Remote control code setting .......................... 44
Remote control ID, advanced setup ............... 45
Remote control signal transmitter, remote control ............................................. 7
Remote control, controlling other component ................................................. 44
Remote control, preparation ............................ 9
Remote control, troubleshooting ................... 50
REMOTE ID, advanced setup ....................... 45
Repeat playback, iPod ................................... 31
Repeat, OPTION menu .................................. 35
Resetting remote control code ....................... 44
RETURN, remote control ................................ 7
Roleplaying Game, sound field program ....... 25
â–
S
SB Level, sound field parameter ................... 36
SCENE function ............................................ 21
5 8
En
Index
SCENE, front panel ..........................................4
SCENE, remote control ....................................7
Sci-Fi, sound field program ............................24
Selecting SCENE ...........................................21
Setting remote control code ...........................44
Set-top box connection ...................................15
Setup menu .....................................................38
Setup menu basic operation ...........................39
SETUP, remote control ....................................7
Shuffle playback, iPod ...................................31
Shuffle, OPTION menu .................................35
Signal Info parameter .....................................34
Signal Info, OPTION menu ...........................34
SILENT CINEMA .........................................27
SL Level, sound field parameter ....................36
SLEEP indicator, front panel display ...............6
Sleep timer .....................................................22
SLEEP, remote control .....................................7
Sound field parameter ....................................36
Sound field program editing ...........................36
Sound field program registration ...................21
Sound selection key, remote control ................7
Sound setup, setup menu ................................41
SOURCE POWER, remote control ..................7
Speaker cable connection ...............................12
Speaker connection ........................................11
Speaker indicator, front panel display ..............6
Speaker layout ................................................10
Speaker placement .........................................10
Speaker setup .................................................39
SPEAKERS terminal, rear panel ......................5
Specifications .................................................57
Spectacle, sound field program ......................24
Sports, sound field program ...........................25
SR Level, sound field parameter ....................36
Standard, sound field program .......................24
Standby, 1 HDMI, function setup ..................42
STANDBY/ON, front panel .............................4
Straight decoding mode ..................................27
Straight Enhancer, sound field program .........26
STRAIGHT, front panel ...................................4
Subwoofer ......................................................10
Subwoofer Phase, A)Config, speaker setup .............................................40
Sur. B, A)Config, speaker setup .....................40
Sur. L, C)Distance, speaker setup ..................41
Sur. LR, A)Config, speaker setup ..................40
Sur. R, C)Distance, speaker setup ..................41
Sur.B L, C)Distance, speaker setup ...............41
Sur.B R, C)Distance, speaker setup ...............41
Surround back left speaker .............................10
Surround back right speaker ...........................10
Surround back speaker ...................................10
Surround decoder editing ...............................36
Surround left speaker .....................................10
Surround right speaker ...................................10
SWFR, C)Distance, speaker setup .................41
â– T
The Bottom Line, sound field program ..........25
The Roxy Theatre, sound field program ........25
Tone control ...................................................22
TONE CONTROL, front panel ........................4
TRANSMIT, remote control ............................7
Troubleshooting .............................................46
TU, advanced setup ........................................45
Tuner frequency step, advanced setup ...........45
Tuner indicator, front panel display .................6
Tuner key, remote control ................................7
Tuner, troubleshooting ...................................49
TUNING l / h , front panel ...........................4
Tuning, AM ....................................................28
Tuning, FM ....................................................28
Turning off .....................................................17
Turning on ......................................................17
TV control key, remote control ........................7
TV monitor connection ..................................14
â– U
Using the remote control ................................. 9
â– V
VIDEO jack ................................................... 13
Video jack ...................................................... 13
VIDEO jack, front panel .................................. 4
Video/audio jack ............................................ 13
Virtual CINEMA DSP ................................... 27
VOLTAGE SELECTOR ............................... 17
VOLTAGE SELECTOR, rear panel ............... 5
VOLUME +/–, remote control ........................ 7
VOLUME control, front panel ........................ 4
VOLUME indicator, front panel display ......... 6
Volume Trim, OPTION menu ....................... 33
â– Y
YPAO ............................................................ 18
YPAO, troubleshooting ................................. 51
“ A STANDBY/ON ” or
“ f POWER ” (example) indicates the name of the parts on the front panel or the remote control. Refer
to “Part names and functions” on page 4.
59
En
List of remote control codes i
TV
A.R. Systems 0274
Acme 0260
Acura
ADC
Admiral
0261, 0273
0259
0100, 0224, 0257,
0258, 0259, 0264,
Advent
Adventura
Adyson
Agashi
Agazi
Aiko
0265
0204
0107
0260, 0327, 0328
0327, 0328
0259
Aim
Aiwa
Akai
0260, 0261, 0273,
0274, 0327, 0328
0274
0028, 0297
0063, 0096, 0101,
0205, 0231, 0261,
0262, 0268, 0271,
0273, 0274, 0327,
Akiba
Akura
Alaron
Alba
0328
0262, 0274
0259, 0262, 0273,
0274
0327
0243, 0260, 0261,
0262, 0266, 0269,
0271, 0273, 0274,
Albatron
Alcyon
Alleron
Allorgan
Allstar
Amtron
Anam
0294, 0300, 0327
0222
0249
0105
0328
0268, 0274
America Action 0225
AMOi 0326
Amplivision 0243, 0260, 0275,
0328
Amstrad 0259, 0261, 0262,
0273, 0274
0104
0225, 0261
Anam National 0102, 0104
Anglo
Anitech
0261, 0273
0249, 0259, 0261,
Ansonic
0273, 0274
0243, 0250, 0261,
0263, 0273, 0274
AOC
Apex
Arcam
0072, 0090, 0096,
0103
0061, 0117, 0139
0327, 0328
Arcam Delta 0260
Aristona 0268, 0271, 0274
Arthur Martin 0275
ASA
Asberg
0257, 0265
0249, 0268, 0274
Astra
Asuka
0261
0259, 0260, 0262,
0327, 0328
Atlantic
Atori
Auchan
Audiosonic
0260, 0268, 0271,
0274, 0327
0261, 0273
0275
AudioTon
Audiovox
0243, 0260, 0261,
0262, 0268, 0271,
0274, 0328
0243, 0260, 0328
0104, 0144, 0225
Capsonic
Carena
Carnivale
Carrefour
Carver
Cascade
Casio
Cathay
CCE
Celebrity
Celera
Centurion
Century
CGE
Changhong
Chimei
Cimline
Citizen
Ausind
Autovox
Aventura
Awa
Axion
0249
0249, 0257, 0259,
0260, 0328
0097
0327, 0328
0206
Baird 0328
Bang & Olufsen 0230, 0257
Basic Line 0261, 0262, 0268,
0273, 0274, 0328
Bastide
Baur
Bazin
Beko
0260, 0328
0271, 0274
0328
0243, 0269, 0274,
0282, 0351, 0357,
0372, 0380
Belcor 0090
Bell & Howell 0065, 0100
Benq
Beon
Best
Bestar
Binatone
Blue Sky
Blue Star
Boots
BPL
Bradford
Brandt
Brillian
Brinkmann
Brionvega
0051, 0160, 0315
0268, 0271, 0274
0243
0243, 0268, 0274
0260, 0328
0262, 0274
0270
0260, 0328
0270, 0274
0104, 0225
0267, 0272
0228
Britannia
Brockwood
Broksonic
Bruns
BTC
Bush
0274
0257, 0268, 0271,
0274
0260, 0327, 0328
0090
0063, 0225
0257
0262
0261, 0262, 0264,
0266, 0268, 0270,
0271, 0273, 0274,
0282, 0286, 0294,
Candle
0300, 0328, 0329,
0351, 0388, 0394,
0413
0072, 0090, 0096,
0107
0259
0274
0096
0266
0088
0261, 0273, 0274
0317
City
Clarion
Clarivox
0268, 0271, 0274
0229, 0328
0057, 0101
0117
0268, 0271, 0274
0257
0243, 0249
0117
0323
0261, 0273
0072, 0085, 0090,
0096, 0104
0261, 0273
0225
0271
Clatronic 0243, 0249, 0259,
0260, 0261, 0262,
0268, 0269, 0273,
0274, 0328
CMS 0327
CMS Hightec 0328
Coby
Colortyme
0151
0072, 0090
Commercial Solutions
0071
Concerto
Concorde
Condor
0072, 0090
0261, 0273
0243, 0260, 0268,
0269, 0273, 0274,
Contec
0327
0225, 0260, 0261,
0266, 0273, 0327
Contec/Cony 0094, 0104
Continental Edison
0267
Cosmel
Craig
Crosley
0261, 0273
0104, 0225
0088, 0119, 0249,
0257
Crown 0104, 0225, 0243,
0249, 0261, 0268,
0269, 0271, 0273,
0274
CS Electronics 0260, 0262, 0327
CTC Clatronic 0263
CTX 0159
Curtis Mathes 0065, 0071, 0072,
CXC
Cybertron
Cytron
Daewoo
0085, 0088, 0090,
0096, 0099, 0224
0104, 0225
0262
0202
0072, 0085, 0090,
0103, 0119, 0245,
0260, 0261, 0268,
0273, 0274, 0281,
0285, 0303, 0321,
Dainichi
Dansai
Dantax
Dawa
Daytron
De Graaf
Decca
0327, 0328, 0344,
0361, 0387
0262, 0327
0259, 0268, 0271,
0274, 0327, 0328
0243, 0271
0274
0072, 0085, 0090,
0261, 0273
0264
0260, 0268, 0271,
0274, 0328
Dell
Denver
0167, 0195
0308, 0312
Desmet
Diamant
Diamond
0268, 0271, 0274
0274
0327
DiamondVision 0213, 0221
Dimensia
Disney
Dixi
0099
0137
0261, 0268, 0271,
0273, 0274, 0328
Dream Vision 0415, 0416
DTS 0261, 0273
Dual
Dual-Tec
Dumont
0260, 0274, 0328
0260, 0261
0076, 0090, 0108,
0257, 0260, 0263,
0328
Emprex
Envision
Epson
Erres
ESA
ESC
Etron
Eurofeel
Euro-Feel
Euroline
Euroman
Euromann
Durabrand
Dux
Dwin
Dynatron
Dynex
Elbe
0077, 0097, 0133,
0225
0271
0224
0268, 0271, 0274
0181, 0182
Elcit
Electa
0243, 0250, 0274,
0328
0257
0270
ELECTRO TECH 0261
Electroband 0057, 0101
Electrograph 0226
Electrohome 0072, 0090, 0101,
Element
Elin
0102
0180
0260, 0268, 0271,
0273, 0274, 0327
Elite
Elman
Elta
Emerson
0262, 0268, 0274
0263
0261, 0273, 0327
0065, 0072, 0077,
0082, 0085, 0090,
0094, 0095, 0097,
0104, 0105, 0119,
0225, 0243, 0257,
0274
0200
0072, 0090, 0096
0156, 0201, 0309
Europhon
0268, 0271, 0274
0097
0328
0261
0328
0259
0271
0243, 0327, 0328
0259, 0260, 0268,
0274
0260, 0263, 0268,
0274, 0327, 0328
Expert
Exquisit
Fenner
Ferguson
Fidelity
0275
0274
0261, 0273
0267, 0271, 0272
0260, 0264, 0274,
0327
Filsai
Finlandia
Finlux
0328
0264
0249, 0257, 0260,
0263, 0268, 0271,
0274, 0328
FIRST LINE 0260, 0261, 0268
Firstline 0273, 0274, 0327,
0328
Fisher
Flint
Formenti
Formenti/Phoenix 0327
Fortress 0257, 0258
Fraba
Friac
Frontech
0065, 0243, 0257,
0260, 0266, 0269,
0328
0268, 0274
0249, 0257, 0258,
0260, 0271, 0327
0243, 0274
0243
0259, 0261, 0264,
0265, 0273, 0328
Fujitsu 0023, 0024, 0025,
0105, 0328
Fujitsu General 0328
Fujitsu Siemens 0425, 0426, 0427,
0428, 0429
Funai 0033, 0034, 0035,
0036, 0037, 0097,
Futuretech
Galaxi
Galaxis
Gateway
GBC
GE
0104, 0105, 0225,
0259
0104, 0225
0269, 0274
0243, 0274
0163, 0226, 0227
0261, 0266, 0273
0069, 0071, 0072,
0073, 0077, 0090,
0099, 0102, 0106,
0112, 0131
Geant Casino 0275
GEC 0260, 0265, 0268,
0271, 0274, 0328
Geloso 0261, 0264, 0273
General Technic 0261, 0273
Genexxa 0262, 0265, 0268,
0274
GFM
Giant
Gibralter
0177, 0210
0328
0076, 0090, 0096,
0108
GoldHand
Goldline
GoldStar
Goodmans
0327
0274
0072, 0077, 0085,
0090, 0094, 0096,
0103, 0243, 0260,
0261, 0264, 0268,
0271, 0273, 0274,
0327, 0328
0164, 0259, 0261,
0266, 0268, 0271,
Gorenje
GPM
GPX
Gradiente
Graetz
Granada
Grandin
Gronic
Grundig
Grunpy
Haier
Halifax
Hallmark
Hampton
Hanseatic
0273, 0274, 0322,
0328, 0395, 0399,
0412
0243, 0269
0262
0211
0162
0265
0249, 0260, 0264,
0266, 0268, 0271,
0274, 0275, 0328
0261, 0262, 0270,
0271
0328
0242, 0243, 0249,
0274, 0356
0104, 0105, 0225
0187, 0207
0259, 0260, 0327,
0328
0072, 0077, 0090
0260, 0327, 0328
0243, 0250, 0260,
0261, 0266, 0268,
0271, 0273, 0274,
0328
Hantarex 0261, 0273, 0274
Hantor 0274
Harman/Kardon 0088
Harvard 0104, 0225
Harwood
Havermy
HCM
0273, 0274
0224
0259, 0260, 0261,
0270, 0273, 0274,
Hema
0328
0273, 0328
Hewlett Packard 0146
Higashi
HiLine
0327
0274
Hinari
Hisawa
Hisense
Hitachi
Hornyphon
Hoshai
Huanyu
Hygashi
Hyper
Hypson
Hyundai
Iberia
ICE
Isukai
ITC
ITS
ITT
ITV
Janeil
JBL
JC Penney
JCB
Jensen
JVC
ICeS
Ilo
IMA
Imperial
Indiana
Infinity
InFocus
Ingelen
Ingersol
Initial
Inno Hit
Innovation
Insignia
Inteq
Interactive
Interbuy
Interfunk
International
Intervision
Irradio
0397, 0430
0265
0261, 0273
0203
0249, 0260, 0261,
0262, 0268, 0271,
0273, 0274, 0328
0259, 0261
0182, 0188, 0190,
0209
0076
0243
0261, 0273
0243, 0257, 0265,
0268, 0271, 0274
0327
0243, 0259, 0260,
0263, 0274, 0328
0249, 0261, 0262,
0268, 0271, 0273,
0274
0262, 0274
0260, 0328
0262, 0268, 0270,
0274, 0327
0261, 0265
0261, 0271, 0274
0107
0088
0072, 0073, 0085,
0090, 0099, 0103,
0106
0057, 0101
0072, 0090
0017, 0018, 0019,
0092, 0093, 0094,
0106, 0251, 0252,
0266, 0268, 0293,
0360, 0379
0261, 0262, 0266,
0268, 0271, 0273,
0274
0262, 0270, 0275
0165
0006, 0014, 0015,
0016, 0042, 0072,
0090, 0094, 0173,
0254, 0255, 0256,
0260, 0264, 0265,
0266, 0274, 0285,
0300, 0319, 0328,
0348, 0349, 0385,
0402, 0410
0268, 0274
0262
0260, 0327
0260, 0327, 0328
0260, 0261, 0273,
0327, 0328
0259, 0260, 0268,
0270, 0271, 0274,
0275, 0328
0223
0274
0259, 0260, 0261,
0262, 0268, 0273,
0274, 0327, 0328
0327
0198, 0203
0104
0243, 0249, 0265,
0268, 0269, 0274
0268, 0271, 0274
0088
0168, 0277, 0313,
Kaisui
Kamosonic
Kamp
Kapsch
Karcher
0260, 0261, 0262,
0270, 0273, 0274,
0327, 0328
0260
0260, 0327
0265
0243, 0260, 0261,
0271, 0274
Kawasho
KEC
Kendo
Kenwood
KIC
Kingsley
0072, 0090, 0101,
0327
0225
0243, 0263, 0264,
0274
0072, 0090, 0096
0328
0260, 0327
KLH 0117
Kloss Novabeam 0104, 0107
Kneissel
Kolster
0243, 0250, 0274
0268, 0274
Konka
Korpel
Korting
Kosmos
Koyoda
KTV
Kyoto
Lasat
Lenco
Lenoir
Leyco
LG
0262
0268, 0271, 0274
0243, 0257
0274
0261
0085, 0096, 0104,
0225, 0229, 0260,
0328
0327, 0328
0243
0261, 0273
0260, 0261, 0273
0259, 0268, 0271,
0274
0016, 0038, 0039,
0077, 0103, 0145,
0222, 0243, 0246,
0253, 0260, 0261,
0264, 0268, 0271,
0273, 0274, 0282,
0290, 0299, 0316,
0327, 0328, 0351,
LG/GoldStar 0246
Liesenk 0271
Liesenkotter
Life
Lifetec
0359, 0367, 0382,
0384, 0389, 0396
0274
0259, 0261
0259, 0261, 0273,
0274
Lloyds
Loewe
0273
0243, 0250, 0274,
0280, 0306, 0347
0257, 0268, 0271 Loewe Opta
Logik
Luma
0100
0264, 0271, 0273,
0274
0264, 0268, 0271, Lumatron
Lux May
Luxman
Luxor
LXI
0274, 0328
0268
0072, 0090
0260, 0264, 0328
0061, 0065, 0071,
0072, 0073, 0077,
0088, 0099
M Electronic 0260, 0261, 0265,
MAG
Magnadyne
Magnafon
0267, 0268, 0271
0050
0257, 0263, 0271
0249, 0260, 0263,
0327
Magnavox
Magnum
Majestic
Mandor
Manesth
Marantz
Marelli
Mark
Masuda
Matsui
Matsushita
Maxent
Mediator
Medion
Megapower
Megatron
MElectronic
Melvox
Memorex
Memphis
Mercury
Metz
MGA
Micromaxx
Microstar
Midland
Minerva
Minoka
Mintek
Mitsubishi
Murphy
NAD
Naonis
NEC
0065, 0072, 0077,
0100, 0103, 0133,
0219, 0261, 0273
0261, 0273
0273, 0274
0257
0072, 0077, 0090,
0096, 0103
0259, 0261
0259, 0261
0069, 0071, 0073,
0076, 0085, 0106,
0108
0249
0268, 0274
0203
0006, 0015, 0016,
0048, 0072, 0077,
0090, 0103, 0196,
0224, 0257, 0266,
0268, 0274, 0298,
0371
Mivar 0243, 0249, 0250,
0260, 0327, 0328
Monivision 0222
Montgomery Ward
Motion
Motorola
MTC
0100
0249
0102, 0224
0072, 0090, 0096,
0103, 0243, 0327
Multi System 0271
Multitech 0104, 0225, 0229,
0243, 0260, 0261,
0263, 0264, 0266,
0271, 0273, 0274,
0327, 0328
0260, 0327
0061, 0072, 0077
0264
0026, 0053, 0072,
0090, 0096, 0102,
0103, 0266, 0328
0072, 0088, 0090,
0091, 0095, 0096,
0098, 0114, 0115,
0129, 0134, 0176,
0178, 0189, 0210
0259, 0261
0100
0259
0259, 0260, 0268,
0271, 0274, 0328
0072, 0088, 0090,
0096, 0158, 0268,
0271, 0274
0257
0268, 0271, 0273,
0274, 0327, 0328
0328
0260, 0261, 0264,
0266, 0268, 0271,
0273, 0274, 0328,
0405
0067
0193, 0226
0268, 0271, 0274
0259, 0261, 0274
0222
0072, 0077
0273, 0274, 0327,
0328
0275 ii
Neckermann 0243, 0257, 0260,
0264, 0268, 0269,
NEI
Net-TV
0271, 0274, 0328
0268, 0271, 0274
0226
0273, 0274 Neufunk
New Tech
New World
0261, 0268
0262
NewTech
Nicamagic
Nikkai
0273, 0274, 0328
0260, 0327
0259, 0260, 0262,
0268, 0271, 0273,
Nikko
Nobliko
Nokia
Norcent
Nordic
Nordmende
0274, 0327, 0328
0072, 0077, 0096
0249, 0260, 0263,
0327
0265
0155
0328
0257, 0265, 0267,
Nordvision
Novatronic
Oceanic
Okano
Olevia
ONCEAS
Onwa
Opera
Oppo
Optimus
Optoma
Optonica
Orbit
Orion
0268
0271
0274
0265, 0275
0243, 0269, 0274
0052, 0140, 0149,
0154, 0157
0260
0104, 0225
0274
0208
0065, 0067
0194
0224
0268, 0274
0121, 0192, 0261,
0268, 0271, 0273,
0274, 0282, 0329
Orline
Osaki
0274
0259, 0260, 0262,
0274, 0328
0262 Oso
Otto Versand 0258, 0260, 0266,
0268, 0270, 0271,
Pael
Palladium
0274, 0328
0260, 0327
0243, 0260, 0269,
0274, 0328
Palsonic
Panama
Panasonic
0328
0259, 0260, 0261,
0273, 0274, 0327,
0328
0006, 0007, 0066,
0067, 0068, 0069,
0070, 0102, 0106,
0113, 0147, 0215,
0241, 0265, 0274,
0279, 0310, 0332,
Panavision
0334, 0368, 0374
0274
Pathe Cinema 0243, 0250, 0260,
Pausa
Penney
0275, 0327
0261, 0273
0061, 0069, 0071,
0077, 0096
0274, 0327 Perdio
Perfekt
Philco
0274
0072, 0088, 0090,
0091, 0094, 0096,
0102, 0103, 0243,
0249, 0257, 0274
Philharmonic 0260, 0328
Philips 0040, 0088, 0089,
0090, 0091, 0094,
0098, 0099, 0102,
0114, 0135, 0143,
0176, 0178, 0189,
0210, 0212, 0232,
0233, 0257, 0260,
0268, 0271, 0274,
0278, 0287, 0301,
0302, 0307, 0311,
0314, 0330, 0331,
0333, 0337, 0338,
0339, 0341, 0343,
0345, 0355, 0363,
0365, 0377, 0378,
0381, 0383, 0406,
0409, 0414
Philips Magnavox 0089, 0114, 0115
Phoenix 0243, 0257, 0268,
Phonola
Pilot
Pioneer
Plantron
0271, 0274, 0327
0257, 0268, 0271,
0274, 0327
0085, 0090, 0096
0012, 0013, 0072,
0090, 0243, 0265,
0267, 0268, 0271,
0274, 0408
0259, 0268, 0273,
0274
Playsonic
Polaroid
0328
0117, 0152, 0184,
0220
0261, 0273 Poppy
Portland
Prandoni-Prince 0249, 0264
Precision 0260, 0328
Prima
0072, 0085, 0090,
0103
0161, 0207, 0261,
0265, 0273
Princeton
Prism
Profex
Profi-Tronic
Proline
Proscan
Prosonic
Protech
Proton
0222
0069, 0106
0261, 0273
0268, 0274
0268, 0274
0071, 0073, 0099
0243, 0260, 0271,
0274, 0327, 0328
0259, 0260, 0261,
0263, 0268, 0271,
0328
0072, 0077, 0090,
Protron
PROVIEW
Provision
Pulsar
Pye
0094
0150
0050, 0164
0271, 0274
0076, 0090, 0108
0268, 0271, 0274,
Pymi
0296, 0338
0261, 0273
Quandra Vision 0275
Quasar
Quelle
0067, 0069, 0102,
0106
0259, 0260, 0268,
Questa
Radialva
RadioShack
0271, 0274, 0328
0266
0274
0065, 0071, 0077,
0096, 0225, 0274
RadioShack/Realistic
Radiola
0072, 0085, 0090,
0094, 0099, 0104
0268, 0271, 0274,
0328
Radiomarelli 0257, 0274
Radiotone 0243, 0268, 0273,
Rank
0274
0266
RCA
Realistic
Recor
Redstar
Reflex
Revox
Rex
RFT
Rhapsody
R-Line
Roadstar
Robotron
Rowa
Royal Lux
RTF
Runco
Saba
Saisho
Salora
Sambers
Sampo
Samsung
Sandra
Sansui
0094, 0096, 0103,
0118, 0217, 0229,
0235, 0236, 0237,
0243, 0259, 0260,
0261, 0268, 0269,
0271, 0273, 0274,
0284, 0295, 0327,
0328, 0336, 0346,
0390, 0407
0260, 0327, 0328
0063, 0121, 0268,
0274
Sanyo 0020, 0021, 0022,
0049, 0065, 0090,
0141, 0191, 0243,
0250, 0260, 0266,
0273, 0291, 0327,
0328, 0370, 0373,
SBR
Sceptre
0391
0271, 0274
0166, 0185
Schaub Lorenz 0265
Schneider 0260, 0262, 0268,
0271, 0274, 0287,
Scotch
Scott
Sears
SEG
SEI
0300, 0328, 0364,
0366
0072, 0077
0072, 0077, 0090,
0094, 0104, 0105,
0199, 0225
0061, 0065, 0071,
0072, 0073, 0077,
0088, 0090, 0097,
0099, 0105
0259, 0260, 0263,
0266, 0271, 0273,
0274, 0300, 0327,
0328
0274
0071, 0072, 0073,
0074, 0075, 0090,
0099, 0102, 0103,
0109, 0120, 0179,
0218
0065, 0077, 0096,
0225
0274
0274
0274
0243, 0268, 0271,
0274
0259, 0264, 0265
0243, 0250, 0257
0327
0268, 0271, 0274
0259, 0261, 0262,
0273
0257
0327, 0328
0243
0257
0076, 0096, 0108
0257, 0265, 0267,
0272, 0376
0259, 0260, 0261,
0273, 0328
0264, 0265
0249, 0263
0072, 0085, 0090,
0096, 0226
0029, 0030, 0031,
0032, 0044, 0045,
0046, 0047, 0072,
0077, 0084, 0085,
0086, 0087, 0090,
SEI-Sinudyne 0257, 0263, 0265
Seleco 0264, 0265, 0266
Sencora
Sentra
0261, 0273
0273
Serino
Sharp
0327
0009, 0010, 0011,
0072, 0080, 0081,
0082, 0083, 0085,
0090, 0094, 0110,
0148, 0183, 0216,
0224, 0247, 0248,
0258, 0266, 0288,
0304, 0324, 0325,
0340, 0358, 0362,
0369, 0386, 0392,
0398, 0400, 0401,
Sheng Chia
Shogun
Siarem
Sierra
Siesta
Signature
Silva
Silver
Singer
Sinudyne
Skantic
Solavox
Sonitron
Sonoko
0403
0224
0090
0257, 0263, 0274
0268, 0274
0243
0100
0327
0266
0257, 0263, 0275
0257, 0263, 0271,
0274
0265
0265
0243, 0328
0259, 0260, 0261,
0268, 0271, 0273,
0274, 0328
0265, 0275
0243, 0268, 0271,
Sonolor
Sontec
Sony
0292, 0393, 0411
Sound & Vision 0262, 0263
Soundesign
0174, 0234, 0261,
0266, 0276, 0289,
0072, 0077, 0090,
0104, 0105, 0225
Soundwave
Squareview
SSS
Standard
0268, 0271, 0274
0097
0090, 0104, 0225
0260, 0261, 0262,
0268, 0273, 0274,
0328
Starlite
0274
0041, 0057, 0058,
0059, 0060, 0101,
0116, 0125, 0126,
0127, 0142, 0169,
0170, 0171, 0172,
Stenway
Stern
Strato
Stylandia
Sunkai
Sunstar
Sunwood
0104, 0225, 0271,
0273, 0274
0270
0264, 0265
0273, 0274
0328
0261
0273, 0274
0261, 0268, 0273,
0274
0260, 0327, 0328
0095, 0224
Superla
Superscan
SuperTech
Supra
Supre-Macy
Supreme
Susumu
Sutron
SVA
Sydney
0273, 0274, 0327
0261, 0273
0107
0057, 0101
0262
0261, 0273
0197
0260, 0327, 0328 iii
Sylvania 0072, 0088, 0089,
0090, 0091, 0095,
0096, 0097, 0098,
0175, 0177, 0210
Symphonic 0097, 0104, 0108,
0133, 0210, 0225
Syntax 0149
Syntax-Brillian 0149
Sysline
Sytong
Tandy
Tashiko
Tatung
0271
0327
0224, 0258, 0260,
0262, 0265, 0328
0260, 0264, 0266,
0327, 0328
0102, 0227, 0260,
0268, 0271, 0274,
TCM
Teac
Tec
Technics
TechniSat
Techwood
TEDELEX
Teknika
Teleavia
Telecor
Telefunken
0328
0259, 0261
0274, 0328
0260, 0261, 0273,
0328
0067, 0069, 0106
0320, 0417, 0418,
0419
0069, 0072, 0090,
0106
0328
0072, 0085, 0088,
0090, 0094, 0100,
0103, 0104, 0105,
0225
0267
0274, 0328
0267, 0268, 0272,
0274
0274 Telegazi
Telemeister
Telesonic
Telestar
Teletech
Teleton
Televideon
Televiso
Tensai
Tesmet
Tevion
Texet
Thomson
Thorn
TMK
TNCi
Tokai
Tokyo
Tomashi
Toshiba
0054, 0061, 0062,
0063, 0064, 0065,
0122, 0123, 0124,
0128, 0130, 0132,
0139, 0214, 0244,
0266, 0283, 0305,
Totevision
Towada
Trakton
0328, 0329, 0342,
0350, 0352, 0353,
0354, 0375, 0404
0085
0265, 0328
0328
Trans Continens 0274, 0328
Transtec 0327
Trident 0328
0274
0274
0274
0261, 0271, 0273,
0274
0260, 0328
0327
0275
0261, 0262, 0268,
0273, 0274, 0328
0268
0259, 0261
0260, 0273, 0327,
0328
0238, 0239, 0240,
0260, 0267, 0268,
0272, 0274, 0335
0271, 0274
0072, 0077, 0090
0076
0268, 0274, 0328
0260, 0327
0270
0027, 0043, 0053,
Triumph
Uher
Ultravox
Unic Line
United
Universum
0274
0243, 0249, 0265,
0268, 0274
0257, 0260, 0263,
0274, 0327
0274
0271
0243, 0249, 0259,
Vexa
0268, 0269, 0271,
0274, 0328
Univox 0274
Vector Research 0096
Vestel 0264, 0265, 0268,
0269, 0271, 0274,
0328
0261, 0271, 0273,
Victor
0274
0093, 0266, 0268
VIDEOLOGIC 0327
Videologique 0260, 0262, 0327,
0328
VideoSystem 0268, 0274
Videotechnic 0327, 0328
Vidikron 0088
Vidtech 0072, 0077, 0090,
0103
Viewsonic
Viking
Viore
0153, 0186, 0226,
0318
0107
0198
Visiola
Vision
Vizio
Vortec
Voxson
0260, 0327
0268, 0274, 0328
0090, 0136, 0160,
0227, 0420, 0421,
0422, 0423, 0424
0268, 0271, 0274
Waltham
Wards
0249, 0257, 0264,
0265, 0268, 0274
0260, 0274, 0328
0072, 0077, 0088,
0090, 0091, 0096,
0098, 0099, 0100,
Watson
Watt Radio
Waycon
Wega
Wegavox
Weltblick
0103, 0105
0268, 0271, 0274
0260, 0263, 0327
0061
0257, 0266, 0274
0273
0268, 0271, 0274,
0328
Westinghouse 0057, 0138, 0142
White Westinghouse
0008, 0119, 0260,
0263, 0271, 0274,
Wincom
Xrypton
Yamaha
0327
0055, 0056
0274
0000, 0001, 0002,
0003, 0004, 0005,
0072, 0090, 0096,
Yamishi
Yokan
Yoko
Yorx
Zanussi
Zenith
0103
0274, 0328
0274
0243, 0259, 0260,
0261, 0262, 0268,
0271, 0273, 0274,
0327, 0328
0262
0264, 0328
0076, 0077, 0078,
0079, 0090, 0100,
0108, 0111
VCR
ABS 1066
Adventura
Adyson
Aiwa
1023
1090
1023, 1072, 1073,
1074
Akai
Akiba
Akura
Alba
1071, 1073
1079, 1090
1073, 1079, 1090
1074, 1075, 1076,
Alienware
1079, 1090, 1091
1066
Ambassador 1076
American High 1022
Amstrad
Anitech
Apex
ASA
1072, 1090, 1091
1079, 1090
1010
1077, 1078
Asha
Asuka
1020
1072, 1077, 1078,
1079, 1090
Audio Dynamics 1018
Audiosonic
Audiovox
Baird
1091
1021
1072, 1073, 1075,
1091
Bang & Olufsen 1067
Basic Line 1074, 1075, 1076,
1079, 1090, 1091
Baur
Beaumark
1078
1020
Bell & Howell 1019
Bestar 1075, 1076, 1091
Black Panther Line
Blaupunkt
Bondstec
Broksonic
Bush
1075, 1091
1078
1076, 1090
1054
1074, 1075, 1079,
1090, 1091, 1097,
Calix
Candle
Canon
1099, 1109, 1139
1021
1020, 1021
1022
Cathay
Catron
CGE
Cimline
CineVision
Citizen
Clatronic
Colortyme
Condor
Craig
Crown
1091
1076
1072, 1073
1074, 1079, 1090
1058
1020, 1021
1076, 1090
1018
1075, 1076, 1091
1020, 1021
1075, 1076, 1079,
1090, 1091
Curtis Mathes 1018, 1020, 1022
Cybernex 1020
CyberPower
Daewoo
1066
1023, 1075, 1076,
Dansai
Dantax
Daytron
DBX
De Graaf
Decca
Dell
1091, 1116, 1141
1079, 1090, 1091
1074
1075, 1091
1018
1078
1072, 1073, 1078
1066
Denko 1090
DiamondVision 1050
DigiFusion
DIRECTV
1092
1035, 1038, 1040,
1059, 1060, 1061,
1065
Dish Network 1064
Dishpro 1064
Dual 1073, 1078, 1091
Dumont
Durabrand
Dynatech
Echostar
1072, 1078
1032
1023
1064
Elbe
Elcatech
1091
1090
Electrohome 1021
Electrophonic 1021
Elsay
Elta
Emerson
ESC
Etzuko
Expressvu
Ferguson
Fidelity
Finlandia
Finlux
Firstline
1090
1079, 1090, 1091
1021, 1022, 1023,
1070, 1090
1075, 1091
1079, 1090
1064
1073
1072, 1090
1078
1072, 1073, 1078
1074, 1077, 1079,
Fisher
1090
1019
Flint 1074
Formenti/Phoenix 1078
Frontech
Fuji
1076
1022
Fujitsu
Funai
Galaxy
Garrard
Gateway
GBC
GE
GEC
Geloso
General
1072
1023, 1072
1072
1023
1066
1076, 1079
1020, 1022
1078
1079
1076
General Technic 1074
GOI 1064
GoldHand
Goldstar
Goodmans
1079, 1090
1018, 1021, 1072,
1077
1072, 1075, 1076,
Gradiente
Graetz
Granada
Grandin
1077, 1079, 1090,
1091
1023
1073
1078
1072, 1075, 1076,
1077, 1079, 1090,
1091
Grundig 1078, 1079
Hanseatic 1077, 1078, 1091
Harley Davidson 1023
Harman/Kardon 1018
Harwood
HCM
Headquarter 1019
Hewlett Packard 1066
Hinari
1090
1079, 1090
1074, 1079, 1090,
1091
Hisawa
Hitachi
1074
1072, 1073, 1078,
1089, 1108, 1124
HNS 1060
Howard Computers
1066
HP
HTS
Hughes 1035, 1040, 1061
Hughes Network Systems
Humax
Hush
Hypson
1066
1064
1038, 1060
1035, 1060, 1094
1066
1074, 1079, 1090,
1091 iv
iBUYPOWER 1066
Impego 1076
Imperial
Inno Hit
1072
1075, 1076, 1078,
Innovation
1079, 1090, 1091
1074
Instant Replay 1022
Interbuy 1077, 1090
Interfunk
Intervision
Irradio
ITT
ITV
JC Penney
JCL
JVC
1078
1072, 1091
1077, 1079, 1090
1073
1075, 1077, 1091
1018, 1019, 1020,
1021, 1022
1022
1011, 1012, 1013,
1014, 1015, 1016,
1017, 1018, 1019,
1028, 1035, 1064,
1073, 1085, 1117,
1130, 1131, 1133,
1134, 1135, 1136
1079, 1090 Kaisui
Karcher
Kendo
Kenwood
Kodak
Korpel
Kyoto
Lenco
Leyco
LG
1078
1074, 1075, 1076,
1090
1018, 1019, 1073
1021, 1022
1079, 1090
1090
1075
1079, 1090
1021, 1053, 1072,
1077, 1088, 1100,
1106, 1125, 1143
Lifetec
Linksys
Lloyd’s
Loewe Opta
Logik
Lumatron
1074
1066
1023
1077, 1078
1079, 1090
1075, 1091
Luxor
LXI
M Electronic 1072
Magnavox 1022, 1032, 1044,
Magnin
Manesth
Marantz
1090
1021
1070
1021
1079, 1090
1018, 1019, 1022,
Mark
Marta
Matsui
1078
1091
1021
1074, 1077
Matsushita 1022
Media Center PC 1066
Mediator
Medion
MEI
Memorex
1078
1074
1022
1019, 1020, 1021,
1022, 1023, 1032,
1048, 1069, 1072,
1077
Memphis 1079, 1090
MGN Technology 1020
Micromaxx 1074
Microsoft
Microstar
Migros
Mind
Mitsubishi
Motorola
MTC
1066
1074
1072
1066
1029, 1072, 1078
1022
1020
Multitech 1020, 1023, 1072,
1076, 1078, 1079,
Murphy
NEC
1090
1072
1018, 1019, 1073
Neckermann 1073, 1078
NEI
Nesco
1078
1079, 1090
Nikkai
Nikko
1076, 1090, 1091
1021
Niveus Media 1066
Noblex 1020
Nokia
Nordmende
Northgate
Oceanic
Okano
Olympus
Optimus
Orion
1073, 1091
1073
1066
1072, 1073
1074, 1090, 1091
1022
1021
1033, 1069, 1074,
Orson
Osaki
1097, 1139
1072
1072, 1077, 1079,
1090
Otto Versand 1078
Palladium 1073, 1077, 1079,
Panasonic
1090
1007, 1008, 1009,
1022, 1026, 1042,
1043, 1068, 1082,
1101, 1126, 1132
Pathe Marconi 1073
Perdio
Philco
Philips
1072
1022, 1090
1022, 1030, 1035,
1038, 1039, 1040,
1044, 1055, 1060,
1078, 1084, 1095,
1096, 1104, 1105,
1111, 1113, 1122,
1124, 1127, 1128,
1129
Philips Magnavox 1030
Phonola 1078
Pilot
Pioneer
Polaroid
Portland
1021
1078, 1118
1010, 1049
1075, 1076, 1091
Prinz
Profex
Proline
Proscan
Prosonic
Pulsar
Pye
Quarter
Quartz
Quasar
Quelle
Radialva
1072
1079
1072
1065
1074, 1091
1032
1052, 1078
1019
1019
1022
1072, 1078
1090
RadioShack 1021
RadioShack/Realistic
Radiola
Radix
Randex
RCA
Realistic
1019, 1020, 1021,
1022, 1023
1078
1021
1021
1020, 1022, 1025,
1035, 1040, 1047,
1060, 1065
1019, 1020, 1021,
1022, 1023
ReplayTV
Rex
RFT
1041, 1068
1073
1076, 1078, 1090
Ricavision
Roadstar
Royal
Runco
Saba
Saisho
Samsung
Samurai
Sanky
Sansui
1066
1075, 1077, 1079,
1090, 1091
1090
1032
1073
1074, 1079
1006, 1020, 1038,
1040, 1046, 1060,
1080, 1107, 1110,
1112, 1121, 1123,
1140, 1142
1076, 1090
1032
1033, 1056, 1069,
1073
Sanyo
Saville
1019, 1020, 1114
1091
SBR 1078
Schaub Lorenz 1072, 1073
Schneider 1072, 1074, 1075,
1076, 1077, 1078,
Sears
SEG
1079, 1090, 1091
1019, 1021, 1022
1079, 1090, 1091
SEI-Sinudyne 1078
Seleco
Sentra
Sentron
Sharp
Shintom
Shivaki
Shogun
Siemens
Silva
Silver
Singer
Sinudyne
Solavox
Sonic Blue
Sonneclair
Sonoko
Sontec
Sony
1073
1076, 1090
1079, 1090
1031, 1045, 1057,
1081, 1115, 1137
1079, 1090
1077
1020
1077
1077
1091
1022
1078
1076
1041, 1068
1090
1075, 1091
1077
1000, 1001, 1002,
1003, 1024, 1027,
1036, 1062, 1066,
1083, 1098, 1103,
Stack
Stack 9
Standard
Stern
STS
1138
1066
1066
1075, 1091
1091
1022
Sunkai
Sunstar
Suntronic
Sunwood
Superscan
Sylvania
1074
1072
1072
1079, 1090
1070
1022, 1023, 1044,
Symphonic
Systemax
1052, 1070
1023, 1044, 1090
1066
Tagar Systems 1066
Taisho 1074
Tandberg 1091
Tandy
Tashiko
Tatung
TCM
Teac
Tec
Technics
Teknika
Teleavia
1019
1021, 1072
1072, 1073, 1078
1074, 1093, 1120
1023, 1091
1076, 1090, 1091
1022
1021, 1022, 1023
1073
Telefunken
Teletech
Tenosal
Tensai
Tevion
Thomson
Thorn
Tivo
TMK
Tokai
Tonsai
Toshiba
1073
1090, 1091
1079, 1090
1072, 1077, 1079,
1090
1074
1073, 1087
1073
1035, 1036, 1037,
1039, 1040, 1060,
1061, 1062
1020
1077, 1079, 1090
1079
1004, 1005, 1034,
1051, 1063, 1066,
Totevision
Touch
Towada
Towika
TVA
Weltblick
XR-1000
Yamaha
Yamishi
Yokan
Yoko
Zenith
ZT Group
1073, 1078, 1086,
1099, 1102, 1119,
1144
1020, 1021
1066
1079, 1090
1079, 1090
1076
Uher
UltimateTV
Ultravox
Unitech
1077
1065
1091
1020
United Quick Star 1075, 1091
Universum 1072, 1077, 1078
Vector Research 1018
Video Concepts 1018
Videon
Videosonic
Viewsonic
Voodoo
Wards
1074
1020
1066
1066
1020, 1021, 1022,
1023
1077
1022, 1023
1018, 1019
1079, 1090
1079, 1090
1076, 1077, 1079,
1090
1032
1066
DVD
4Kus
Accurian
Advent
AEG
Airis
Aiwa
Akai
Akura
Alba
2097
2220
2169, 2201
2312
2318
2272
2170, 2195, 2225,
2227
2310
2018, 2232, 2247,
2259, 2264
Alco
Alize
Allegro 2215
Amitech 2312
Amphion MediaWorks
2145
AMW
Apex
Apple
Arrgo
Asono
Aspire
Astar
2199
2315
2145, 2313
2044, 2045, 2046,
2047, 2076, 2208,
2209
2163
2216
2318
2140, 2202
2162 v
ATACOM
Audiovox
Avious
Awa
2318
2111, 2199
2317
2313
Axion 2171
Bang & Olufsen 2210
Baze
BBK
2317
2318
Bellagio
Best Buy
Blaupunkt
Blue Parade
2313
2309
2209
2207
Boghe
Brainwave
Brandt
Broksonic
Bush
2300
2312
2198, 2238
2192, 2195
2018, 2060, 2248,
2264, 2301, 2308,
2317, 2350, 2368
California Audio Labs
2197
Cambridge Audio 2304
CAT
CAVS
2306, 2307
2146
Centrum
CGV
Changhong
Cinetec
CineVision
Clatronic
2307
2304, 2312
2222
2313
2191, 2215
2308, 2317
Coby
Conia
2077, 2124, 2314
2301
Continental Edison
2313
Crown
C-Tech
2312
2305
Curtis Mathes 2217
CVG 2299
CyberHome
Cytron
Daenyx
2048, 2068, 2216,
2233, 2258
2166
2313
Daewoo
2326, 2376
Daewoo International
Dalton
Dansai
Daytek
Dayton
2083, 2215, 2280,
2299, 2312, 2313,
2313
2311
2303, 2312
2145, 2234, 2313
DEC
Decca
Denon
2313
2308
2312
2105, 2147, 2197,
Denver
Denzel
Desay
Diamond
2286
2288, 2308, 2310,
2314
2302
2159
2304, 2305
DiamondVision 2179, 2186
Disney 2078, 2088
DK Digital
Dmtech
Dual
Durabrand
2257
2226
2302
2218
DVX
Easy Home
Eclipse
E-Dem
2305
2309
2304
2318
Electrohome 2312
Elin 2312
Elta
Emerson
Enterprise
2263, 2312, 2315
2196, 2211, 2219
2211
Jwin
Kansai
Kawasaki
Kennex
Kenwood
KeyPlug
Kiiro
Kingavon
Kiss
KLH
Koda
Koss
KXD
Landel
Lasonic
Lawson
Lecson
Lenco
Lenoxx
Enzer
Epson
ESA
Finlux
Fintec
Fisher
Funai
Gateway
2302
2165
2219
2304, 2312, 2317
2299
2212
2219
2097
GE
Gericom
GFM
Giec
2079, 2206, 2209
2269
2176
2300
Global Solutions 2305
Global Sphere 2305
Go Video
Goodmans
2135, 2215
2247, 2289, 2298,
GPX
Gradiente
Graetz
Greenhill
Grundig
Grunkel
2300, 2308, 2330,
2369
2177
2197
2302
2209
2271
2312, 2316
GVG
H&B
2299
2308
H_her
Haaz
Haier
2318
2304, 2305
2172
Harman/Kardon 2125, 2213
HiMAX
Hitachi
2309
2008, 2033, 2108,
2302, 2309, 2320,
2366
Hiteker 2208
Home Tech Industries
Hyundai
Ilo
Initial
Innovation
Insignia
Integra
Irradio iSymphony
JBL
JVC
2318
2316
2167
2167, 2209
2228
2080, 2175, 2219
2207
2103
2164
2213
2049, 2050, 2051,
2052, 2053, 2054,
2055, 2056, 2057,
2070, 2242, 2261,
2275, 2276, 2277,
2278, 2339, 2340,
2341, 2342, 2386,
2387, 2389, 2390,
2391
2148
2314
2199
2312
2123, 2197, 2270
2312
2312
2308
2302
2199, 2209
2308
2095, 2198, 2204
2309
2221
2214
2305
2303
2308, 2312, 2317
2203, 2218
Mintek
Mitsubishi
Mizuda
Monyka
Mustek
Mx Onda
Mystral
Naiko
Nesa
Neufunk
Nevir
Next Base
Nexxtech
NU-TEC
Onkyo
Oopla
Oppo
Optim
LG
Life
Lifetec
Limit
2080, 2107, 2115,
2116, 2141, 2188,
2211, 2215, 2237,
2239, 2285, 2293,
2295, 2348, 2370
2228
2228
2305
Liquid Video 2204
Liteon 2097, 2121, 2220
Loewe
LogicLab
Magnavox
2274
2305
2075, 2096, 2178,
2180, 2196, 2205,
Magnex
Majestic
Marantz
Marquant
Matsui
McIntosh
Mecotek
Medion
Memorex
MiCO
Micromaxx
Microsoft
Microstar
Minoka
Minowa
2219, 2308
2317
2314
2282
2312
2198, 2296
2149
2312
2228
2078, 2184, 2195
2300, 2304
2228
2206
2228
2312
2317
Optimus
Orava
Orbit
Orion
Oritron
P&B
Pacific
Panasonic
2167, 2209
2081
2308, 2309
2302
2232
2304
2316
2312
2209
2302
2312
2221
2161
2301
2205, 2290
2097
2150, 2173
2303
2230
2308
2313
2027, 2060
2198, 2204
2308
2305
2015, 2016, 2017,
2036, 2037, 2038,
2039, 2040, 2041,
2042, 2043, 2074,
2089, 2104, 2108,
2112, 2120, 2131,
2132, 2197, 2205,
2244, 2245, 2246,
2253, 2254, 2255,
Parasound peeKTON
Philips
2292, 2321, 2324,
2327, 2328, 2329,
2331, 2383, 2388
2151
2318
2026, 2061, 2062,
2075, 2090, 2094,
2096, 2097, 2103,
2110, 2126, 2180,
2193, 2205, 2231,
2235, 2241, 2251,
Phonotrend
Pioneer
2252, 2256, 2260,
2268, 2282, 2332,
2333, 2343, 2344,
2345, 2367, 2371,
2373, 2380, 2382,
2385
2317
2012, 2013, 2014,
2063, 2064, 2065,
2066, 2067, 2113,
2134, 2207, 2230,
2236, 2265, 2266,
2267, 2297, 2322,
2351, 2352, 2353,
2354, 2355, 2356,
2357, 2358, 2359,
Pointer
Polaroid
Portland
Powerpoint
Prima
Proceed
Proscan
Prosonic
Protron
Provision
Pye
Qwestar
Raite
RCA
2377
2312
2047, 2133, 2185
2312
2313
2174
2208
2206
2299, 2314
2152
2308
2194
2198
2302
2058, 2059, 2071,
2079, 2183, 2199,
2206, 2207, 2209
2310, 2312, 2314
2203
2305
RedStar
Regent
Reoc
Rimax
Rio
Roadstar
Ronin
Rotel
Rowa
Rownsonic
Saba
Sabaki
Saivod
Sampo
Samsung
2315
2215
2281, 2308
2313
2153
2200, 2301
2307
2198, 2238
2305
2312
2223
2031, 2032, 2033,
2034, 2035, 2082,
2127, 2137, 2138,
2154, 2182, 2197,
2283, 2319, 2325,
2346, 2347, 2349,
2372, 2381
Sansui
Sanyo
2027, 2195, 2304,
2305, 2312
2139, 2195, 2212,
2374
ScanMagic 2232
Schaub Lorenz 2312
Schneider 2226
Scientific Labs 2305
Scott
Seeltech
SEG
2243, 2311
2318
2240, 2302, 2305,
2313
Sharp
Shinsonic
Sigmatek
Silva
Singer
Skymaster
2009, 2010, 2084,
2122, 2142, 2143,
2144, 2181, 2190,
2228, 2262, 2375
2167
2309, 2318
2310
2304, 2305
2279, 2305 vi
Skyworth
Slim Art
2310
2312
SM Electronic 2305
Sonic Blue 2215
Sontech
Sony
2316
2005, 2006, 2007,
2020, 2021, 2022,
2023, 2024, 2025,
2069, 2072, 2073,
2085, 2086, 2087,
2091, 2092, 2093,
2102, 2128, 2129,
2130, 2249, 2250,
2323, 2334, 2335,
2336, 2360, 2361,
2362, 2363, 2364,
2365, 2384
Soundmaster 2305
Soundmax
Spectra
2305
2313
Spectroniq
Standard
Star Cluster
Starmedia
2155
2305
2305
2308, 2318
Sungale
Sunkai
Superscan
Supervision
Sylvania
2158
2312
2196
2305
2094, 2180, 2189,
2196, 2219, 2224
Symphonic
Synn
2062, 2180
2305
T.D.E. Systems 2316
Tatung 2083, 2312
TCM
Teac
2228, 2379
2199, 2287, 2301,
Tec
Technics
Technika
Telefunken
Tensai
2305
2310
2197
2312, 2317
2307
2312
Tevion 2228, 2305, 2311
Theta Digital 2207
Thomson 2229, 2238, 2284,
2294
Tokai
Top Suxess
Toshiba
2302, 2310
2318
2004, 2026, 2027,
2028, 2029, 2030,
2098, 2099, 2100,
2101, 2114, 2117,
2118, 2119, 2136,
2187, 2195, 2205,
2291, 2337, 2338,
2378
TRANScontinents
2313, 2317
Transonic
Trio
2317
2312
Trutech
TruVision
2160
2309
TSM
Umax
United
2318
2315
2317
Urban Concepts 2205
US Logic
Venturer
Viewmaster
Vocopro
VocoStar
Waitec
2167
2199
2318
2156
2157
2318
Welltech 2300
Westinghouse 2109, 2168
Wharfedale 2304, 2305
Woxter
Xbox
Xlogic
XMS
Xoro
Yamada
Yamaha
Yamakawa
Yukai
Zenith
2315, 2318
2206, 2229
2305, 2312
2312
2300
2097, 2313, 2315
2000, 2001, 2002,
2003, 2011, 2018,
2019, 2036, 2106,
2197, 2273
2302, 2313
2232
2080, 2141, 2205,
2211, 2215
Blu-ray Disc
LG
Panasonic
Pioneer
Samsung
Sharp
Sony
Yamaha
2115
2089, 2131, 2132
2134
2035, 2127
2142, 2143, 2144
2025
2018
DVR
Bush
Panasonic
Philips
Pioneer
RCA
Samsung
Yamaha
2060
2037, 2038, 2039,
2040, 2041, 2042
2061, 2062
2063, 2064, 2065,
2066, 2067
2059
2035
2036
DVD Recorder
Aspire
Astar
Broksonic
Go Video
Hitachi
Insignia
Irradio
JVC
LG
Liteon
Panasonic
Philips
Pioneer
Pye
Samsung
Sansui
Sanyo
Sony
Sylvania
Toshiba
Yamaha
2140
2162
2192
2135
2108
2080
2103
2054, 2055, 2056,
2057
2107, 2115, 2141,
2188
2121
2037, 2038, 2039,
2041, 2042, 2043,
2089, 2104, 2108,
2112
2090, 2096, 2097,
2126, 2193
2067, 2113
2194
2034, 2082, 2138
2027
2139
2022, 2023, 2024,
2085, 2086, 2087,
2102, 2128, 2129,
2130
2189
2030, 2099, 2100,
2101, 2114, 2117,
2118, 2119
2106
Cable
ABC
ADB
Adelphia
3004, 3015, 3016,
3017, 3037, 3040,
3067, 3080, 3081
3070
3003
Alcatel
Americast
Amstrad
Antronix
Archer
Arcon
AT&T
Axis
Bell South 3046
Cable Vision 3014
Cabletenna
Cabletime
3019
3058
Cableview
Clearmaster
3005
3045
ClearMax 3045
Clyde Cablevision
3066
3046
3048, 3068
3019, 3020
3020
3048
3013
3048
3059
Colour Voice 3022
Comcast
Comcrypt
3006, 3010, 3039
3057
Comtronics
Contec
Coolmax
COX
3023
3024
3045
3006
Cryptovision 3060
Director 3006
Eastern
Everquest
Fidelity
Filmnet
3025
3041
3048
3057
Filmnet Cablecrypt
3061
Filmnet Comcrypt
3061
Finlux
Focus
3051
3044
Foxtel 3068
France Telecom 3054, 3055
Freebox 3069
GC Electronics 3020
GE 3015, 3016
GEC 3059
Gemini 3026, 3041
General Instrument
Goldstar
Gooding
Grundig
Hamlin
3006, 3008, 3016,
3039, 3050, 3067,
3075
3042
3049
3048, 3049
3027, 3028
Hirschmann
Hitachi
3051
3016
HomeChoice 3056
Humax
ITT Nokia
Jasco
Jerrold
3001, 3002, 3071
3051
3041
3006, 3008, 3016,
3026, 3037, 3041,
3050, 3064, 3067,
JVC
3075
3049
Kabel Deutschland
Macab
Magnavox
Maspro
Matsui
MegaCable
Memorex
Minerva
Mnet
Motorola
3043, 3073, 3074
3055
3029
3049
3049
3039
3030, 3040
3049
3057
3006, 3008, 3010,
3013, 3039, 3072,
3075
Movie Time
Mr Zapp
Multichoice
Multitech
NEC
NET Brazil
Nokia
Noos
NSC
Oak
Pace
Palladium
Panasonic
Paragon
Philips
3031, 3063
3055
3057
3045
3018
3007
3051
3055
3031
3024
3011, 3043, 3084
3049
3034, 3036, 3040
3040
3021, 3022, 3029,
3049, 3053, 3054,
Pioneer
3055
3012, 3032, 3038,
3042, 3048, 3083,
3084
Popular Mechanics
3044
Proscan
Pulsar
3015, 3016
3040
PVP Stereo Visual Matrix
3064
Quasar
RadioShack
RCA
3040
3041, 3045
3005, 3036, 3076,
3077
Realistic
Recoton
Regal
Regency
Rembrandt
Runco
3020
3044
3028
3025
3016
3040
Sagem
Samsung
3055
3011, 3023, 3032,
3042
SAT 3048
Scientific Atlanta 3003, 3004, 3011,
3012, 3013, 3062,
Signal
Signature
Sony
3078, 3079, 3080,
3081, 3082, 3083,
3084
3026, 3041
3016
3014, 3047
Sprucer 3036
Standard Component
Starcom
Stargate
Starquest
Supercable
Supermax
Tele+1
Telepiu
Thomson
TIME WARNER 3006
Tocom 3017
Torx
Toshiba
Tristar
Tudi
3067
3040
3045
3052
3033
3026, 3037, 3041,
3067
3026, 3041
3026, 3041
3008
3045
3057, 3061
3057
3000, 3009
Tusa
TV86
3026, 3041
3031
Unika 3019, 3020
United Cable 3037, 3064
Universal
Universum
3019, 3020
3049, 3051
V2
Videoway
View Star
3045
3065
3024, 3029, 3031 vii
Viewmaster
Vision
Visiopass
Vortex View
Wittenberg
Zenith
Zentek
3045
3045
3051, 3054, 3055
3045
3048
3035, 3040, 3046
3044
Sattelite
AB Sat
AccessHD
ADB
AGS
Akai
Alba
4138, 4139
4058
4142
4138
4101, 4103
4083, 4084, 4085,
4086, 4108, 4139
Aldes
Allsat
Allsonic
Alltech
Alpha 4103
Alpha Digital 4058
Alphastar
Amitronica
Amstrad
4031
4139
4089, 4113, 4136,
4139
Anglo
Ankaro
Anttron
Apollo
Armstrong
Artec
Asat
ASLF
Astacom
Astra
4085, 4087, 4088
4098, 4101, 4103
4074, 4087, 4090
4139
4139
4074, 4087, 4090,
4139
4083, 4086
4083
4089, 4103
4054
4101, 4103
4139
4138
Astro
4089, 4091, 4100,
4137, 4139
4074, 4086, 4088,
4090, 4093, 4135,
AudioTon
Aurora
Austar
Axiel
Axis
4136, 4137
4086, 4098
4140
4140
4138
4074, 4090, 4091,
4096
4074, 4090 Best
Blaupunkt
Blue Sky
Boca
Boston
Brain Wave
Broadcast
Broco
BSkyB
BT
Bubu Sat
Bush
4093
4139
4089, 4100, 4105,
4139
4138
4095
4094
4139
4113, 4123
4138
4139
4084, 4127
Cambridge 4136
Canal Satellite 4135
Canal+ 4135
CaptiveWorks 4049
Channel Master 4060, 4085
Chaparral 4025
CHEROKEE 4138
Chess 4134, 4139
CityCom
Clatronic
CNT
Comag
4084, 4133, 4137
4095
4088
4000, 4001, 4002,
Commlink
Comtech
4003, 4004
4087
4096
Condor
Connexions
Conrad
4074, 4090, 4137
4074, 4092
4074, 4133, 4136,
4137
Conrad Electronic 4137, 4139
Contec 4096
Coolsat
Cosat
4050
4098
Coship
Crown
Daeryung
Daewoo
DDC
Delega
Dew
Diamond
4063
4089
4092
4107, 4139
4085
4085
4096
4097
Digiality 4137
Digital Stream 4059
DIRECTV 4017, 4018, 4020,
4021, 4022, 4024,
4037, 4038, 4040,
4041, 4043, 4045,
4057, 4106, 4143,
4144, 4145, 4146,
4147, 4148, 4149,
4150, 4151, 4152,
Discoverer
Discovery
4153, 4154, 4155,
4156, 4157
4134
4138
Diseqc 4138
Dish Network 4011, 4012, 4013,
Dishpro
Distrisat
Ditristrad
DNT
Drake
DStv
Dune
Echostar
4014, 4019, 4039,
4064
4039, 4064
4103
4098
4092, 4101, 4103
4026
4140
4074
4011, 4019, 4039,
Einhell
Elap
Elekta
Elsat
Elta
Emanon
Emme Esse
Engel
Ep Sat
EURIEULT
Eurodec
Europa
Europhon
Eurosat
Eurosky
4064, 4092, 4139
4083, 4087, 4089,
4136, 4139
4138, 4139
4088
4139
4074, 4083, 4090,
4098, 4101, 4103
4083
4074, 4090
4139
4084
4077
4102
4103, 4136, 4137
4137
4089
4074, 4089, 4090,
Eurostar
Eutelsat
Exator
Expressvu
Fenner
4133, 4136, 4137
4089, 4133, 4137
4139
4083, 4086
4039
4074, 4134, 4139
Ferguson
Fidelity
Finlandia
Finlux
FinnSat
Flair Mate
4084, 4102, 4132
4136
4084
4084
4096, 4102
4139
Foxtel
Freecom
4140
4083, 4099, 4136
FTEmaximal 4074, 4139
Fuba
Galaxis
GE
4074, 4083, 4090,
4092, 4093, 4101,
4133
4074, 4087, 4090,
4091, 4096, 4098,
4133, 4140
4015, 4016, 4061,
4151
General Instrument
4027, 4065
GMI
GOI
4089
4039
Goldbox
GoldStar
Goodmans
Goodmind
4135
4099
4079, 4080, 4084
4061
Grandin
Grothusen
Grundig
4077
4083, 4099
4084, 4086, 4093,
4113, 4129, 4136,
4140
Hänsel & Gretel 4137
Hantor
Hanuri
4083, 4095
4088
Hauppauge
Heliocom
Helium
Hinari
Hirschmann
Huth
4126
4137
4137
4085
4074, 4093, 4128,
4136, 4137, 4138
Hisawa
Hisense
Hitachi
Homecast
Houston
HTS
Hughes
4095
4066
4032, 4084, 4149,
4153
4005, 4006, 4007
4098
4039
4018, 4022, 4144,
4146, 4150, 4152
Hughes Network Systems
4021
Humax 4051, 4075, 4076,
4110
4087, 4089, 4094,
4095, 4096, 4098,
4137, 4141
4077
4066
Hypson
Ilo
Imex
Innovation
Insignia
Intertronic
Intervision
ITT Nokia
4077
4090
4057
4089
4098, 4137
4084
Jerrold
Johansson
JOK
JSR
JVC
4065
4095
4138
4098
4011, 4019, 4039,
4079
Kamm
Kathrein
4139
4093, 4101, 4103,
4109, 4112, 4120,
4133, 4138, 4139
Kathrein Eurostar 4133
Klap 4138
Konig
Kosmos
4137
4099
KR 4086
Kreiselmeyer 4093
K-SAT
Kyostar
4139
4083
L&S Electronic 4074
Lasat
Lasonic
Lenco
Leng
Lennox
Lenson
Lexus
LG
Lifesat
Lifetec
Lorenzen
Lorraine
Lupus
Luxor
Lyonnaise
Macab
Magnavox
Manata
Manhattan
Neusat
Next Level
NextWave
Nikko
Nokia
Nordmende
Nova
Novis
Oceanic
Octagon
Okano
Optex
Optus
4074, 4088, 4090,
4100, 4133, 4134,
4137
4062
4074, 4083, 4099,
4133, 4137, 4139
4095
4098
4136
4103
4053, 4057, 4099
4074, 4090, 4134,
4139
4090
4137
4099
4074, 4090
4136
4102
4102
4045, 4055
4077, 4138, 4139
4084, 4088, 4098,
4138
Marantz
Mascom
Maspro
Matsui
Max
Mediabox
Mediamarkt
Mediasat
Medion
Medison
Mega
Memorex
Metronic
4089
4091, 4135, 4136
4074, 4090, 4139
4139
4101, 4103
4045
4077, 4078, 4083,
4086, 4087, 4088,
4139
Metz 4093
Micro electronic 4136, 4137, 4139
Micro Technology 4139
MicroGem
Micromaxx
Microstar
Microtec
Minerva
Mitsubishi
Mitsumi
Morgan’s
Motorola
4101
4088
4084, 4139
4138
4137
4135
4056
4074, 4090
4090
4139
4093
4084, 4093, 4152
4100
4089, 4100, 4101,
4103, 4139
4008, 4009, 4010,
4065
4140 Multichoice
Multitec
Muratto
Mysat
Navex
Neuhaus
4134
4099
4139
4095
4091, 4098, 4136,
4137, 4139
4139
4065
4141
4089, 4139
4084, 4122
4083, 4084, 4085,
4088, 4102
4140
4095
4097
4083, 4086, 4096
4089
4098
4135, 4140, 4141 viii
Orbitech 4083, 4134, 4135,
4136
OSat 4086
Otto Versand 4093
Pace 4084, 4093, 4113,
4121, 4125, 4138
Pacific
Packsat
Palcom
Palladium
Palsat
Panasat
Panasonic
4097
4138
4085
4089, 4136
4134, 4136
4140
4043, 4044, 4046,
4084, 4113, 4118,
4143, 4148
4084, 4137 Panda
Pansat
Patriot
Paysat
PCT
Philco
Philips
4047
4138
4045
4060
4055
4021, 4022, 4045,
4084, 4101, 4103,
4111, 4115, 4135,
Phoenix
Phonotrend
Pioneer
Polsat
Predki
Premiere
Priesner
Primestar
Profile
Promax
Prosat
Proscan
Protek
Proton
Provision
Quadral
Quelle
Quiero
RadioShack
Radiola
Radix
Rainbow
RCA
4138, 4150, 4152,
4153, 4155, 4156
4096
4084, 4087, 4098
4124, 4135
4102
4095
4098, 4135
4089
4030
4138
4084
4085, 4087
4015, 4016, 4040,
4151
4097
4066
4088
4074, 4085, 4087,
4090, 4138
4093, 4133, 4137
4102
4065
4101, 4103
Realistic
Redpoint
Redstar
RFT
Roadstar
Roch
Rover
Saba
Sabre
Sagem
Sakura
Samsung
SAT
Sat Cruiser
Sat Partner
Sat Team
4092, 4119
4086
4015, 4016, 4034,
4035, 4036, 4037,
4038, 4040, 4151,
4157
4028
4091
4074, 4090
4087, 4101, 4103
4139
4077
4074, 4139
4088, 4133, 4137,
4138
4084
4069, 4102
4096
4018, 4021, 4023,
4041, 4042, 4081,
4082, 4083, 4114,
4150, 4154
4085, 4136
4141
4083, 4086, 4088,
4095, 4099, 4136
4139
Satcom
Satec
Satelco
Satford
Satmaster
Satplus
Schneider
Schwaiger
4094, 4137
4139
4074
4094
4094
4134
4090, 4134, 4138
4097, 4134, 4137
SCS
Seemann
SEG
Seleco
Servi Sat
Siemens
Silva
4133
4089, 4091, 4092
4074, 4083, 4090,
4095
4098
4077, 4139
4093
4099
Skantin
Skardin
Skinsat
SKR
Skymaster
4139
4091
4136
4139
Skymax
SkySat
4067, 4068, 4087,
4134, 4139
4101, 4103
4134, 4136, 4137,
Skyvision
4139
4098
SM Electronic 4134, 4139
Smart 4133, 4139
Sony
SR
Star Choice
Starland
Starring
Start Trak
Strong
4017, 4020, 4135
4089, 4100
4065
4139
4095
4083
4074, 4083, 4086,
4090, 4099, 4140
STS
STVI
4033
4077
Sumida 4089
Sunny Sound 4074
Sunsat
Sunstar
Supermax
Tandberg
4139
4074, 4089, 4100
4141
4102
Tandy
Tantec
TCM
Techniland
TechniSat
4086
4084
4090
4094
4071, 4072, 4073,
4092, 4103, 4116,
4117, 4134, 4135,
4136
Technology
Technosat
Technowelt
Teco
Telanor
Telasat
Telecom
Telefunken
Teleka
Telemaster
Telesat
Telestar
Televes
Telewire
Tempo
Tevion
Thomson
Thorens
Thorn
4140
4141
4137
4089, 4100
4085
4133, 4137
4139
4067, 4083, 4138
4086, 4089, 4092,
4136, 4137
4088
4137
4134, 4135, 4136
4084, 4136
4098
4141
4090, 4139
4070, 4084, 4102,
4104, 4130, 4133,
4135, 4137, 4138,
4139
4097
4084
Turnsat
Tvonics
Twinner
UEC
Uher
UltimateTV
Uniden
Unisat
Unitor
Universum
US Digital
Variosat
Vega
Ventana
Viewsat
Visiosat
Tivax
Tivo
Tokai
Tonna
Toshiba
Triad
Triasat
Triax
Voom
Vortec
Welltech
WeTeKom
Wevasat
Wewa
Winersat
Wisi
Woorisat
Worldsat
Xrypton
XSat
Zehnder
Zenith
Zodiac
4058
4150
4103
4084, 4094, 4098,
4136, 4139
4144, 4152, 4153
4099
4136
4093, 4133, 4136,
4139
4139
4132
4077, 4139
4140
4134
4020
4029, 4045
4089, 4096, 4103
4095
4093, 4133, 4137
4066
4093
4074
4101, 4103
4048
4095, 4098, 4138,
4139
4065
4083
4134
4134, 4136
4084
4084
4095
4084, 4092, 4093,
4136, 4137
4088
4138
4074
4139
4074, 4088, 4090,
4131, 4133
4052, 4057, 4145
4086
CD
Yamaha 5000, 5013
CD Recoder
Yamaha 5001
MD
Yamaha
Tape
Yamaha
Tuner
Yamaha
5002, 5003, 5004
5005, 5006
5007, 5008, 5009,
5010, 5014, 5015,
5016, 5017, 5018
USB
Yamaha
DOCK
Yamaha
LD
Yamaha
5012, 5021
5011, 5022
2002 ix
© 2009 Yamaha Corporation All rights reserved.
Printed in China WQ95680
advertisement
Related manuals
advertisement