Kodak MAX HQ - One Time Use Camera Manual
Hirdetés
Hirdetés
CIS-209
July 2000
CURRENT INFORMATION SUMMARY
Opening Instructions for the
KODAK MAX HQ Flash One-Time-Use Camera
Wear eye protection when opening all cameras.
Wind Off Open Film Door
Shutter Button
Thumbwheel
Check the frame counter window.
X’s must be visible.
If not, grip camera, press Shutter Button, and
turn Thumbwheel until film is fully rewound.
Insert Tool
Use tool to bend cover back and remove film.
Remove Film
Opened camera with film removed.
Insert special tool into end slot (as shown).
CAUTION: This camera body contains a high voltage capacitor and circuit board. To avoid electric shock, do not pry apart the front and back sections of camera. Remove only film and battery from their respective compartments. If sections of the camera are separated, do not touch the circuit board.
Exposed Film
5
Place used camera in recycle bin.
Return camera to Kodak for recycling.
CAUTION: To avoid injury, use tool carefully.
© Eastman Kodak Company, 2000
Current Information Summaries provide information of limited or specific application. Responsibility for judging the timeliness and applicability of the information to a specific photographic use rests with the end user.
CIS-209
Opening Instructions for the
KODAK MAX HQ Flash One-Time-Use Camera
Consumer Imaging
EASTMAN KODAK COMPANY • ROCHESTER, NY 14650
Kodak and Max are trademarks.
New 7-00
Printed in U.S.A.
Letöltés
Hirdetés