Operating Instructions
UTM 110/120
UTM 110/120 Operating Instructions
Foreword
We are pleased to welcome you as a new customer of our Sophos UTM hardware appliances.
To install and configure the hardware appliance you can use the following documents:
Ì Hardware Quick Start Guide: Connection to the system peripherals in a few steps
Ì Operating Instructions: Notes on the security and commissioning of the hardware appliance
Ì Administration Guide: Installing and configuring the software appliance
The Hardware Quick Start Guide and the Security Notes are also delivered in printed form together with the hardware appliance. The instructions must be read carefully prior to using the hardware and should be kept in a safe place.
You may download all user manuals and additional documentation from the support webpage at: astaro.com/support
Security Symbols
The following symbol and its meaning appears in the Hardware Quick Start
Guide, Security Notes and in these Operating Instructions.
Caution and Important Note. If these notes are not correctly observed:
Ì This is dangerous to life and the environment
Ì The appliance may be damaged
Ì The functions of the appliance will be no longer guaranteed
Ì Sophos shall not be liable for damages arising from a failure to comply with the security notes
Designed Use
The hardware appliances are developed for use in networks. The UTM
110/120 model may be operated as a standalone appliance. The hardware appliance can be used in commercial, industrial and residential environments.
The UTM 110/120 model belongs to the appliance group B.
The hardware appliance must be installed pursuant to the current installation notes. Otherwise failure-free and safe operation cannot be guaranteed. The EU declaration of conformity is available at the following address:
Astaro GmbH & Co. KG - a Sophos company
Amalienbadstr. 41/Bau 52
76227 Karlsruhe
Germany
CE Labeling, FCC and Approvals
The UTM 110/120 appliance complies with FCC Class B, CE, C-Tick, VCCI and UL.
Important Note: For computer systems to remain CE and FCC compliant, only CE and FCC compliant parts may be used. Maintaining CE and FCC compliance also requires proper cable and cabling techniques.
Operating Elements and Connections
Sophos UTM 110/120 (rev.5)
LED: data activity link
LED: data activity link
Controls
Power (LED Display)
Green
Green / Yellow
Green / Yellow
Yellow
VGA power switch
COM
2 x USB
Power on
Link
Activity
Hard drive
4 x 10/100/1000
Base-TX ports
LEDs on each Ethernet connector (Speed LED: left, Act/Link LED: right)
Act/Link Green Constantly
1. The Ethernet port is receiving power.
2. Good connection between the Ethernet port and hub.
Speed Yellow
Green
Off
Flashing
On
On
Off
1. The adapter and switch are not receiving power.
2. No connection between both ends of the network.
3. Network drivers have not been loaded or do not function correctly.
The adapter is sending or receiving network data. The frequency of the flashes varies with the amount of traffic.
Operating at 1000 Mbps
Operating at 100 Mbps
Operating at 10 Mbps if Act/Link is on
UTM 110/120 Operating Instructions
UTM 110/120 Operating Instructions
6. Putting into Operation
Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
Scope of Supply
The supplied parts are indicated in the Hardware Quick Start Guide.
Mounting Instructions
The hardware model UTM 110/120 can be placed on a stable horizontal surface or can be mounted on the wall. Screws are not included in delivery.
Use only screws that fit the mounting holes on the bottom side.
To mount the appliance to the rack you need the optional Rack Mounting Kit, which you can purchase through certified Sophos partner near you.
General Precautions
Review the electrical and general safety precautions that came with the components you are adding to your appliance.
Rack Precautions
Ì Ensure that the leveling jacks on the bottom of the rack are fully extended to the floor with the full weight of the rack resting on them.
Ì In single rack installation, stabilizers should be attached to the rack.
Ì In multiple rack installations, the racks should be coupled together.
Ì Always make sure the rack is stable before extending a component from the rack.
Ì You should extend only one component at a time–extending two or more simultaneously may cause the rack to become unstable.
General Server Precautions
Ì Review the electrical and general safety precautions that came with the components you are adding to your appliance.
Ì Install the heaviest server components on the bottom of the rack first, and then work up.
Ì Allow the hot plug hard drives and power supply modules to cool before touching them.
Ì Always keep the rack‘s front door, all panels and server components closed when not servicing to maintain proper cooling.
UTM 110/120
Operating Instructions
Rack Mounting Considerations
Ì Ambient operating temperature: If installed in a closed or multi-unit rack assembly, the ambient operating temperature of the rack environment may be greater than the ambient temperature of the room. Therefore, you should install the equipment in an environment compatible with the manufacturer’s maximum rated ambient temperature.
Ì Reduced airflow: Equipment should be mounted into a rack with sufficient airflow to allow cooling.
Ì Mechanical loading: Equipment should be mounted into a rack so that a hazardous condition does not arise due to uneven mechanical loading.
Ì Circuit overloading: Consideration should be given to the connection of the equipment to the power supply circuitry and the effect that any possible overloading of circuits might have on overcurrent protection and power supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.
Ì Reliable grounding: Reliable grounding must be maintained at all times.
To ensure this, the rack itself should be grounded. Particular attention should be given to power supply connections other than the direct connections to the branch circuit (i.e., the use of power strips, etc.).
Connection and Configuration
How to connect the appliance is described in the Hardware Quick Start
Guide. For configuration you can follow the initial setup wizard described in the WebAdmin Quick Start Guide or cancel it and perform a manual setup
(see the Sophos UTM Administration Guide).
Serial Console
You can connect a serial console to the COM port of the Sophos UTM hardware appliances. You can use, for instance, the Hyperterminal terminal program included with most versions of Microsoft Windows to log on to the appliance console. You will need a RJ45 to DB9 adapter cable to connect the console to your hardware appliance.
The required connection settings are:
Bits per second: 38,400, Data bits: 8, Parity: N (none), Stop bits: 1. Access via the serial console is activated by default on ttyS1. The connections of the appliances and the respective functionality are listed in chapter "Operating
Elements and Connections."
United Kingdom Sales:
Tel: +44 (0)8447 671131
Email: [email protected]
North American Sales:
Toll Free: 1-866-866-2802
Email: [email protected]
Boston, USA | Oxford, UK
© Copyright 2012. Sophos Ltd. All rights reserved.
All trademarks are the property of their respective owners.
Sophos Operating Instructions 02.12v1.dNA
Australia & New Zealand Sales
Tel: +61 2 9409 9100
Email: [email protected]
