PRODUCT SHEET
GB doors, as well as location of the appliance. Temperature setting must consider these factors.
- Unless otherwise specified the appliance accessories are not suitable for washing dishwasher.
A. Freezer Compartment
1.
Ice tray
2.
Wire shelf
3.
Area for freezing
4.
Area for storing frozen foods - ECO GREEN area
5.
The freezer door tray for pizza or other frozen products with a short storage time (2** storage compartment)
6.
Door seals.
B. Refrigerator Compartment
7.
Filter in the fan
7a.
button of fan
7b.
cover of fan
8.
Electronic control panel / light unit
9.
Shelves / Shelf area
10.
Multi-flow cold air system
11.
Cooler Compartment ( best for meat and fish)
12.
Rating plate with commercial name
13.
Fruits and vegetables crisper
13a.
Crisper divider
14.
Reversibility kit
15.
Separator
16.
Door trays
Anti-bacterial protection (depending on the model):
- Antibacterial filter in the fan (7)
- Antibacterial additives in the Crisper (13)
- Door seals are made of material able to inhibit bacterial growth (6).
Notes:
- Depending on the model the number and type of accessories may vary.
- In case it'll have a freezer flap, please remember that to maximize the storage volume it's suggested to remove it.
- All shelves and door trays are removable.
- Freezer wire shelf can be place in two positions:
• In the middle for optimal energy consumption and food preservation
• Upper position (recommended for freezing fresh food)
- The internal temperatures of the appliance depend on the ambient temperature, frequency of opening the
ORGANIZING MAT (depending on the model)
The Organizing Mat is a mat designed to better organize the space on the shelf, and to provide a soft-touch experience when loading heavy items on the shelf.
Some slots could also be used to host bottles (horizontally positioned). In order to remove it (for cleaning purpose, or to use it on top of another shelf), first remove the shelf where it is currently placed.
The mat is dishwashable.
HYDROSENSE SHELVES
(depending on the model)
The special contour of the HydroSense shelves creates a barrier that contain spills and simplifies cleanup, preventing liquids from leaking onto shelves below.
NET SHELF (depending on the model)
The Net Shelf is the net which can be used to store little items directly under the glass shelf, taking full advantage of this space.
Pull down the net shelf (using the lip on the front) to load/unload it.
The net is flexible: do not stress it by loading it with bulky or heavy items. Maximum weight allowed: 2 kg.
To remove the net (for cleaning purpose, or to use it under another shelf), you have to first remove the glass shelf under which the net is currently placed. The net shelf is dishwashable.
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the operation automatically.
After starting the appliance, wait at least 4-6 hours before placing food into the appliance.
The indicator LEDs on the control panel light up for approximately 1 second, and after initialization process, setpoint is displayed.
Note:
- If food is placed in the refrigarator before the appliance has cooled completely, it may deteriorate.
FAN WITH A BUTTON
(depending on the model)
The fan improves temperature distribution inside the refrigerator compartment, allowing better preservation of stored food.
By default, the fan is ACTIVE.
It is advisable to keep the fan active, when the ambient air temperature is above 27 ÷ 28°C or if you perceive drops
D GB F NL E P I GR S N DK FIN PL CZ SK H RUS BG RO UKR CA AE
PRODUCT SHEET of water on the glass shelves or in the severe humidity conditions.
Note: Do not obstruct the air intake area with food items.
To guarantee the right performance at lower ambient temperature (colder than 18°C) and to minimize Energy
Consumption, turn off the fan.
To turn off the fan press the button (7a).
If the appliance has the fan it can be equipped with the antibacterial filter.
Remove it from the box found in the crisper drawer (item
13) and insert into the cover of fan (item 7b).
The replacement procedure is attached with the filter.
GB
FREEZING FRESH FOOD
Place the fresh food to be frozen on the freezer compartment wire shelf. Avoid direct contact with already frozen food. To freeze the quantity of food shown on the rating plate, move the freezer wire shelf to the upper position and switch on Fast Cool function before placing fresh food to be frozen. After 24 hours the food will be frozen and function will be switch off automatically.
FUNCTIONS
FAST COOL
The use of this function is recommended to increase the cooling speed when placing a very high quantity of food in the refrigerator compartment by pressing and holding the pushbutton on the control panel for 3 sec.
ELECTRONIC CONTROL PANEL
DESCRIPTION
1.
extra low temperature
"Fast Cool"
2,3,4.
green LEDs indicating temperature settings
5.
temperature selection /
Fast Cool (3 sec.) pushbutton
TEMPERATURE SELECTION
Temperature selection pushbutton is used to set desired temperature level, from warmest to coldest
. At each short pressure of the pushbutton, the setpoint will change (cyclically).
Temperature adjustment is made with the pushbutton on the control panel.
Temperature set-point is done for both compartments at one time - fridge and freezer.
At first plug-in of appliance factory set-point is chosen medium position. Following table shows set-points level
The Fast Cool (yellow LED ) will turn on. The function is automatically deactivated after 28 hours.
The Fast Cool function can be manually deactivated by pressing and holding the same pushbutton on the control panel for 3 sec., the yellow LED is off.
Note:
- Fast Cool function should be also switched ON before placing fresh food to be frozen in the freezer compartment, in order to maximize the freezing capacity.
ECO GREEN (depending on the model)
This function gives best food preservation performance with the smallest energy consumption possible (around 5-
10% less in comparison with the normal settings - middle temperature) if there is lower amount of food to be preserved in the appliance.
When ECO GREEN function is activated only these ECO compartments should be used in order to have the perfect food preservation:
- 2 "eco green" shelves in the fridge (with green frames)
- 1 "eco green" area under the wire shelf in freezer compartment - below the shelf (located on the lower position).
To activate the Eco Green function press the pushbutton on the control panel to choose the mid-high temperature, as showed here below:
High temp.
Mid-high temp.
Middle temp.
Mid-low temp.
Low temp.
Legend LED ON LED OFF
Legend LED ON LED OFF
D GB F NL E P I GR S N DK FIN PL CZ SK H RUS BG RO UKR CA AE
PRODUCT SHEET
ABNORMAL APPLIANCE OPERATION
When the product is plugged in to the mains, during first
10 minutes of its performance, possible temperature sensor failure will be displayed according to following table:
Refrigerator
Evaporator sensor failure
Refrigerator sensor failure
Refrigerator &
Evaporator sensor failure
GB
DEFROSTING THE FREEZER
COMPARTMENT
The freezer should be defrosted once or twice a year or when excessive frost is present (3 mm thickness). The thin formation of frost is normal.
Before defrosting the freezer compartment unplug the appliance or disconnect it from the power supply.
Defrosting the freezer compartment should be done manually by open the door till the all of ice will be melted.
During defrosting process please wipe the compartment with a rag to avoid water penetration into the product.
Before restarting the product make sure that compartment is fully dry.
REPLACING THE LIGHT
Always disconnect the refrigerator from the power supply before replacing any light bulb.
If the inside light is not working, it is necessary to:
1. Remove the light cover: move it upwards as shown in figure.
Legend LED OFF LED Flashing
The appliance will work preserving the food stored, but it is necessary to contact after-sales service and provide alarm code.
Note: in case of power failure, appliance goes back to normal operation and previously chosen setpoint is restored.
CLEANING
Regularly clean the appliance using a cloth and a solution of warm water, with some soft detergent suitable for cleaning the inside of the refrigerator compartment.
Do not use abrasive detergents or tools.
To ensure continuous and correct flow of defrost water, regularly clean the inside of the draining hole on the back of the refrigerator near the fruit and vegetable drawer, using the tool provided.
2. Check the bulb. If necessary unscrew the broken bulb and replace it with a traditional bulb (with the same characteristics of the previous one) or a LED bulb of the same type available only at our After-sales Service
Centers or authorized dealers.
3. Put on the light cover.
Do not leave the bulb uncovered.
Before carrying out any cleaning or maintenance operation, unplug the appliance or disconnect it from the power supply.
DEFROSTING THE REFRIGERATOR
COMPARTMENT
Refrigerator compartment defrosting is completely automatic.
Droplets of water on the rear wall inside the refrigerator compartment indicate that the automatic defrost phase is in progress. The defrost water is automatically run into a drain hole and collected in a container, where it evaporates.
D GB F NL E P I GR S N DK FIN PL CZ SK H RUS BG RO UKR CA AE
