Norgren PRA/802080/M/200 ISOLine™ profile double acting cylinder Datasheet
Add to My manuals34 Pages
advertisement
![Norgren PRA/802080/M/200 ISOLine™ profile double acting cylinder Datasheet | Manualzz Norgren PRA/802080/M/200 ISOLine™ profile double acting cylinder Datasheet | Manualzz](http://s2.manualzz.com/store/data/061751433_1-b7dea8630be1238d8b5ebb35b00d74a5-360x466.png)
PRA/802000/M, RA/802000/M,
RA/8000, RA/8000/M
ISOLine™ 15552 cylinder, double acting
> ø 32 ... 320 mm > 16 bar version available
> High performance adaptive cushioning system “ACS”
> Low temperature version up to -40°C
> Rail Cylinder
Shock and vibration tested to EN 61373
Category 1;
Class A + B
> High temperature version up to +150°C
Technical features
Medium:
Compressed air, filtered, lubricated or non-lubricated
Standard:
ISO 15552
Operation:
Double acting, adjustable cushioning
Operating pressure:
ø 32 ... 125 mm (Profile barrel)
1 ... 12 bar (14 ... 174 psi)
ø 32 ... 200 mm (Round barrel)
1 ... 16 bar (14 ... 232 psi)
ø 250 & 320 mm (Round barrel)
1 ... 10 bar (14 ... 145 psi)
Ports:
G1/8 ... 1
Cylinder diameters:
32, 40, 50, 63, 80, 100, 125,
160, 200, 250, 320 mm
Standard strokes:
25, 50, 80, 100, 125, 160, 200,
250, 320, 400, 500 mm
Non-standard strokes:
Available (5 ... 2800 mm)
Operating temperature:
ø 32 ... 125 mm
“Standard version”
-20 ... +80°C max. (-4 ... +176°F)
ø 160 ... 320 mm
“Standard version”
-10 ... +80°C max. (+14 ... +176°F)
ø 32 ... 320 mm
“High temperature version” (T)
0 ... +150°C max.
(-17,7 ... +302°F)
ø 32 ... 200 mm
“Low temperature version” (L)
-40 max. ... +80°C max.
(-40 ... +176°F)
Air supply must be dry enough to avoid ice formation at temperatures below +2°C (+35°F).
Standard Materials:
Barrel: Anodised aluminium
End covers: Pressure diecast aluminium (ø 200 ... 320 mm gravity cast aluminium)
Piston rod: Stainless steel
(martensitic)
Piston rod seals: PUR
(ø 160 ... 320 mm NBR)
Piston seals: PUR
(ø 160 ... 320 mm NBR)
‘O’-rings: NBR
Technical data
Cylinder ø (mm)
Profile barrel
Round barrel
Port size
Piston rod ø (mm)
Piston rod thread
Cushion length (mm)
Cushioning
Adaptive cushioning systems “ACS”
Cushioning (adjustable cushion)
Initial cushion volume (cm3)
Theoretical thrusts at 6 bar outstroke (N)
Theoretical thrusts at 6 bar instroke (N)
Air consumption at 6 bar outstroke (l/cm)
Air consumption at 6 bar instroke (l/cm)
32
•
•
G1/8
40
•
•
G1/4
50
•
•
G1/4
63
•
•
G3/8
80
•
•
G3/8
100
•
•
G1/2
125
•
•
G1/2
12 16 20 20 25 25 32
M10 x 1,25 M12 x 1,25 M16 x 1,5 M16 x 1,5 M20 x 1,5 M20 x 1,5 M27 x 2
20 22 24 24 26 33 39
• • • • • • •
160
•
G3/4
40
M36 x 2
43
12,8
482
414
0,056
0,048
20,2
754
633
0,088
0,074
36
1178
990
0,137
0,114
64
1870
1680
0,218
0,195
111
3016
2722
0,35
0,32
235
4710
4416
0,55
0,51
427
7363
6882
0,86
0,79
•
784
12064
11310
1,41
1,32
•
1273
18840
18090
2,2
2,1
200
•
G3/4
40
M36 x 2
43
250
•
G1
50
M42 x 2
55
•
2534
29436
28236
3,44
3,3
•
4559
48228
47292
5,63
5,41
320
•
G1
63
M48 x 2
60
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH
08/20 en 1.5.220.01
The function
The new “ACS” Adaptive
Cushioning System provides a high performance pneumatic damping function. The system will automatically cushion for a wide range of general applications as delivered. Manual adjustment is still possible for extreme applications.
Only adjust the cushion needle in extreme applications.
Mass
(kg)
Operating area of the “ACS”
Adaptive Cushioning System
Adjustment in this zone not necessary.
Design and sizing in pneumatics
Golden Rules
Design and sizing in pneumatics is often based upon experience coupled with an element of fear of under specifying crucial equipment. In an attempt to ensure enough power, engineers may select over sized cylinders and then select over sized valves to supply them with enough air. The same uncertainty can also lead to over sized specification of air line equipment, fittings and tubing.
The outcome is components larger than necessary that use too much compressed air and waste energy and money.
However when following some well proven golden rules and a few laws of pneumatics it is easy to achieve correctly sized pneumatic installations.
Basics to Consider
The force required, the pressure available, the speed of movement and air consumption. ISO and VDMA standard or compact style also cushioning and sensors. Cylinders are greased on assembly and operate under normal conditions without additional lubrication.
However using a lubricator will extend the life of these products.
Golden Rule:
The theoretical force of the cylinder should be 25% extra for high speed, 50% extra for low speed and 100% extra for ultra low speed
(positioning) applications.
The correct sizing is based upon the required force and applied pressure. Go to page 1 for more information on cylinder sizing and air consumption.
Load and Buckling
For applications with high side loading, use pneumatic slide actators or standard cylinders fitted with guide units. Alternatively external guide bearings should be installed. When a long stroke length is specified, care must be taken to ensure the rod length is within the limits for prevention of buckling. The table shows the maximum stroke length for a variety of installation arrangements.
werden.
Für die Berechnung der Kolbenstange wird je nach Befestigungsart
(Einbauart) des Zylinders die Knicklänge festgelegt. Aus der Abbildung schlanke Kolbenstangen dürfen bei drückend arbeitenden Zylindern nicht eingesetzt werden, um ein Ausknicken der Kolbenstange zu vermeiden. können die freien Knicklängen in Abhängigkeit von der Einbauart ermittelt werden.
1) 1)
F F
1)
F F
F F F
1)
F F F
2) 2)
F
F F
F
2) F F
F F F 2) F F F 3) 3)
F
F F
F 3)
F 4) 4) F F
F
4)
F
4)
F
Zylinder
Ø Ø
Cylinder
ø (mm)
Ø Ø mm
Piston rod
ø (mm)
4 4
8 8
10 10
12 12
16
20
25
32
40
50
63
80
16
20
25
32
40
50
63
80
32
40
50
63
80
100
125
160
200
250
320
3
4
4
6
8
10
12
6
12
16
20
6
8
16
8
16 16
14 14
16 16
16 16
20 20
20 20
20 20
25 25
8
10
20
10
10 10
12 12
12 12
12 12
20
25
25
32
40
40
50
63
25 25
25 25
25 25
32 32
32 32
38,1 (1,5)
730
980
1200
25
1400
2000
1600
38,1 (1,5)
40 40
40 40
44,45 (1,75)
50 50
57,15 (2,25)
57,15 (2,25)
63 63
57,15 (2,25)
Load case 1
Pressure (bar)
6
1100
1600
6
860
1200
2000 1600
1500
1900
1200
1500
1500 1200
2000 1600
2400
1900
1900
1500
2400 1900
3000 2400
16
130
590
460
500
960
730
670
930
930
720
1200
950
880
670
1100
910
4
Belastung Fall 2
Druck (bar)
6 4 6
500
730
930
720
880
670
910
1100
860
1100
1400
500
730
930
720
880
670
910
1100
860
1100
1400
Druck (bar)
4 10 16 16
80
6
80 60
16
60
70
80 80
740
50
550
570
700
520
710
880
670
850
1100
420
510
380
520
640
480
620
780
4
Belastung Fall 3
Druck (bar)
4 16 6 6 4
210
320
420
310
380
270
380
480
350
440
570
650
940
1200
930
1100
880
1200
1400
1100
1400
1800
Druck (bar)
4 6 16 16
520 80
16
80
10
380
4
750
960
740
910
690
940
1200
890
1100
1400
80 80
560
720
550
680
510
690
860
650
830
1000
Belastung Fall 4
Druck (bar)
4 16 6 6 4
290
430
550
760
1100
1400
Druck (bar)
4 10 6 16
600 90
16
90
880
90
1100
90
10
450
660
840
420
510
370
520
1100
1300
1000
1400
860
1100
820
1100
650
800
600
820
640
480
610
780
1700
1300
1700
2100
1400 1000
1000 770
1300
1700
980
1200
Belastung Fall 4
Druck (bar)
16
340
500
640
490
600
450
620
760
580
730
930
08/20
1100
860
1100
1400
600
1000
820
1200
950
1000
770
960
660
610
840
840
650
1100
860
800
980
1300
1100
1200
870
480
450
870
510
330
540
420
620
10
120
160
120
320
230
430
720
760
580
720
450
790
620
900
730
990
790
930
650
490
810
660
600
500
470
640
640
360
340
680
390
250
410
320
480
16
90
120
90
240
240
330
ANWENDUNG:
In der Praxis werden die Ventildurchflusswerte bei unterschiedlichen
Bedingungen gemessen. Um die Angaben der verschiedenen Hersteller vergleichen zu können, finden Sie in der untenstehenden Tabelle die
Umrechnungsfaktoren.
Wasser und in m Wasser und in m Wasser und in m 3
Maßeinheit C in dm 3 3 Maßeinheit C in dm 3 2 gemessen werden.
S ist die Nutzfläche in mm 2 S ist die Nutzfläche in mm 2
2 gemessen werden.
Cv Cv
Kv Kv
C C
Faktoren
Cv Cv
1 1
A
S
M 3 /h 3 /h 0,017 l/min 0,001
A
S
Kv Kv
1
0,213
M 3
0,015 0,017
0,053
Faktoren
Cv
0,869 1
C C
4,69
1
0,243
Durchfluss * Öffnungsgröße
Kv
Cv m 3 m 3 /h
59,1 1
C l/min Kv m 3 /h 2 ) 2 )
4,08
1132
241
1
241
18,7
4,11 241
M 3 /h 1 1 0,017 16,67 l/min 0,001 1
1 1
0,040 0,189 1 1 m 3 2 2 )
2 ) l/min S (mm
45,8
1,31
1
Öffnungsgröße
241
21,5
1132 24,7
5,27
18,7
21,5
Die Schmierung durch einen Normalnebelöler oder Mikronebelöler wird in diesem Katalog erklärt. Das empfohlene Öl hängt jedoch sehr von den
16,67 0,364
1
örtlichen Bedingungen sowie von der Verfügbarkeit der verschiedenen
Marken und Sorten ab. Norgren kann aufgrund der Informationen der
0,761 1
2 )
Lieferanten in jedem Land verschiedene Produkte empfehlen.
* Durchflussparameter sind 6 bar am Einlass und 5 bar am Auslass bei
20°C, 1013 mbar und 65% Luftfeuchtigkeit..
xiii xiii
Additional ISO 15552 Cylinder ranges (Cylinder ranges in the red frame are shown in this data sheet.)
Symbols
7
1 3
• • •
Food & B
•
•
•
•
•
• •
•
• • • •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ø (mm)
32 ... 125
32 ... 125
160 ... 320
32 ... 200
Range Discription Datasheet
1_5_220_PRA_802000_M_RA_8000_M
PRA/802000 Double Acting
Cylinder
LPRA/802000
1_5_225_PRA_802000_M_EX
1_5_220_LPRA_802000_M_LRA_8000_M
RA/802000
Double Acting
Cylinder
1_5_220_PRA_802000_M_RA_8000_M
1_5_225_PRA_802000_M_EX
LPRA/802000
RA/8000
Double Acting
Cylinder
1_5_220_LPRA_802000_M_LRA_8000_M
1_5_220_PRA_802000_M_RA_8000_M
LRA/8000
1_5_126_RA_8000_M_EX
1_5_220_LPRA_802000_M_LRA_8000_M
KA/8000
Stainless steel
Cylinder
1_5_222_KA_802000_M
1_5_228_KA_802000_M_EX
32 ... 100
32 ... 100
1_5_230_PRA_822000_M
1_5_235_PRA_822000_M_EX
1_5_240_PRA_842000_M
1_5_245_PRA_842000_M_EX
1_5_250_PRA_862000_M
32 ... 100
1_5_255_PRA_862000_M_EX
• • • • 1_5_260_PRA_882000_M
7 11
1 3
7
32 ... 100
• • 1_5_265_PRA_882000_M_EX
•
• •
• • •
•
• •
40 ... 125
160 ... 320
PSA/182000/
F1
Cylinder with position sensor
1_9_051_PSA_182000_F1
1_9_052_PSA_182000_F1_EX
Datasheet (standard)
1_9_062_SA_8000_F1_EX • •
• • • • •
32 ... 100
PRA/801000,
PRA/803000
Standard
Single Acting
Cylinder
-
1_4_101_PRA_801000_803000
• • • •
32 ... 100
RA/801000,
RA/803000
Standard
Single Acting
Cylinder
-
1_4_101_PRA_801000_803000
• Range available. For additional information please contact the technical service or http://www.imi-precision.com
*1) Rail Cylinder Shock and vibaration tested to EN 61373 Category 1; Class A + B
08/20
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH en 1.5.220.03
Cylinder variants
Symbol
Please see the description below
•
Versions Piston Rod Material Standard Model with
H L T R
• • X •
S
•
C
•
D
Male Piston
Rod Thread
.PRA/802000/M
Female Piston
Rod Thread
.PRA/802000/MX
• • • X
• • X •
•
•
•
•
• .RA/802000/M
.RA/8000/M -
.RA/802000/MX
• • X
X
X •
•
•
•
•
•
•
•
• .RA/8000
PRA/802000/W2
RA/802000/W2
-
ø
(mm)
32 ... 125
32 ... 125
160 ... 320
160 ... 320
PRA/802000/W2X 32 ... 125
RA/802000/W2X 32 ... 125
X
X
• • • X
• • • X
• • X
X
X
X
• • X
X
X
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
X
• • • X
• • • X
• • X
• • X
• • X
• • X
X
X
X
• X
• X
• X
X
X
• X
• X
• X
• X
• X
X
X
X
• • X
• • X
X
X
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
RA/8000/W1
PRA/802000/X2
RA/802000/X2
RA/8000/X2
RA/8000/X1
.PRA/802000/MU
.RA/802000/MU
.RA/8000/MU
RA/8000/IU
PRA/802000/W6
RA/802000/W6
-
-
-
PRA/802000/X2X
RA/802000/X2X
160 ... 200
32 ... 125
32 ... 125
160 ... 200
160 ... 200
.PRA/802000/MUX 32 ... 125
-
.RA/802000/MUX 32 ... 125
160 ... 320
160 ... 320
PRA/802000/W6X 32 ... 125
RA/802000/W6X 32 ... 125
RA/8000/W6
RA/8000/W5
.PRA/802000/MG
.RA/802000/MG
.RA/8000/MG
-
160 ... 200
160 ... 200
-
.PRA/802000/MGX 32 ... 125
.RA/802000/MGX 32 ... 125
160 ... 320
.RA/8000/G 160 ... 320
.PRA/802000/MW .PRA/802000/MWX 32 ... 125
.RA/802000/MW .RA/802000/MWX 32 ... 125
.RA/8000/MW
.RA/8000/W
-
-
160 ... 320
160 ... 320
PRA/802000/X4
RA/802000/X4
PRA/802000/X4X
RA/802000/X4X
32 ... 125
32 ... 125
RA/8000/X4 160 ... 200
RA/8000/X3
.PRA/802000/JM
.RA/802000/JM
.RA/8000/JM
.RA/8000/J
PRA/802000/W4
RA/802000/W4
RA/8000/W3
.PRA/802000/MT
.RA/802000/MT
.RA/8000/MT
-
-
-
-
-
160 ... 200
.PRA/802000/JMX 32 ... 125
.RA/802000/JMX 32 ... 125
160 ... 320
160 ... 320
PRA/802000/W4X 32 ... 125
RA/802000/W4X 32 ... 125
160 ... 200
.PRA/802000/MTX 32 ... 125
.RA/802000/MTX 32 ... 125
160 ... 200
.RA/8000/IT
PRA/802000/N2
RA/802000/N2
-
PRA/802000/N2X
RA/802000/N2X
160 ... 200
32 ... 100
32 ... 100
Description Page
Standard Cylinder (Profile barrel)
Standard Cylinder (Round barrel)
Standard Cylinder (Round barrel)
Standard Cylinder (Round barrel) without
Magnet
Cylinder with Special Wiper - Seal
(suitable for appl. with cement, plaster (stucco), arizona sand, hoar-frost or ice)
Cylinder with Special Wiper - Seal without
Magnet
Low Friction Cylinder
Operating pressure: 1 … 10 bar,
Medium: Compressed air, filtered and non-lubricated recomended
Low Friction Cylinder without Magnet
Cylinder with Extended Piston Rod
Maximum stroke: 2000
Maximum extention: 800
Cylinder with Extended Piston Rod without
Magnet
Cylinder with Extended Piston Rod and Special
Wiper - Seal Maximum stroke: 2000 suitable for appl. with cement, plaster (stucco), arizona sand, hoar-frost or ice
Cylinder with Extended Piston Rod and Special
Wiper - Seal without Magnet
Cylinder with Piston Rod Bellows
Maximum stroke:
ø 32 = 1860, ø 40 ... 320 = 2000
Cylinder with Piston Rod Bellows without Magnet
8
8
9
9
11
11
11
11
11
13
Cylinder without Cushioning
11
Cylinder without Cushioning without Magnet
Low Friction Cylinder without Cushioning
Operating pressure: 1 … 10 bar,
Medium: Compressed air, filtered and non-lubricated recomended
Low Friction Cylinder without
Cushioning without Magnet
11
Cylinder with Double Ended Piston Rod
12
Cylinder with Double Ended Piston Rod without
Magnet
Cylinder with Double Ended Piston Rod and
Special Wiper - Seal without Magnet
(suitable for appl. with cement, plaster (stucco), arizona sand, hoar-frost or ice)
Four Position Cylinder
Maximum stroke = stroke 1 + stroke 2
ø 32 = 700, ø 40 = 1000, ø 50 = 1000,
ø 63 = 900, ø 80 = 1200, ø 100 = 1100,
ø 125 = 1200, ø 160 = 1200, ø 200 = 1100
Four Position Cylinder without Magnet
Cylinder with Non-Rotating Piston Rod
Maximum stroke: 1000
8
12
11
Note:
X
X
•
•
•
•
•
•
PRA/802000/L4
RA/802000/L4
PRA/802000/L4X
RA/802000/L4X
32 ... 125
32 ... 125
Cylinder with Locking unit (Passive)
Spring force on removal of the signal to the unit.
Operating pressure for locking unit: 4 … 10 bar
Maximum stroke: 2600
X
X
•
•
•
•
•
•
PRA/802000/L8
RA/802000/L8
PRA/802000/L8X
RA/802000/L8X
32 ... 125
32 ... 125
Cylinder with Locking unit (Passive) and Special
Wiper - Seal Spring force on removal of the signal to the unit.. Operating pressure for locking unit:
4 … 10 bar (suitable for appl. with cement, plaster
(stucco), arizona sand, hoar-frost or ice)
Maximum stroke: 2600
Versions: H = Hydraulic (ø 32 ... 100 mm); L = Low temperature -40°C (-40°F) (ø 32 - 125mm), -30°C (-22°F) (ø 160 -320mm);
T = High temperature +150°C (+302°F); Piston Rod Material: C = Hard chromium plated; D = Stainless steel austenitic & hard chromium plated;
R = Stainless steel martensitic; S = Stainless steel austenitic; X = Standard; • = Option
14
14 en 1.5.220.04
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH 08/20
Option selector
Non-standard variants
Standard
Hydraulic version
ø 32 ... 100 mm only
Low temperature version
-40°C (-40°F) (ø 32 - 125mm)
-30°C (-22°F) (ø 160 - 320mm)
High temperature version
+150°C max. (+302°F)
Standard
Round barrel
Profile barrel
Piston rod material
Stainless steel martensitic
Stainless steel austenitic
Hard chromium plated
Stainless steel austenitic & hard chromium plated
Cushioning
“ACS” (ø 32 ... 125 mm)
Standard (ø 160 ... 320 mm)
Cylinder ø (mm)
032, 040, 050, 063, 080, 100,
125, 160, 200, 250, 320
Variants ø 32 ... 320 mm
(magnetic piston)
Standard
Special wiper/seal
Low friction
Piston rod bellow
Without cushion
Without cushion, low friction
Double ended piston rod
Double ended piston rod, special wiper/seal
Four-positon cylinder
Non-rotating piston rod (internal)
Locking unit (passive)
Locking unit (passive), special wiper/seal
Extended piston rod
**A/8*****/MU/****/***
Extended piston rod, special wiper/seal
**A/8*****/W6/****/***
Substitute
None
H
L
T
Substitute
None
P
Substitute
C
D
R
S
Substitute
02
None
Substitute
Substitute
MW
X4
JM
W4
M
W2
X2
MG
MT
N2
L4
L8
MU
Extension
(mm)
W6
Extension
(mm)
««« A/8 ««««« / ««« / ««««
Strokes (mm)
5 ... 2800
Piston rod thread
Male
Female
Variants ø 160 ... 320 mm
(non-magnetic piston)
Standard
Special wiper/seal
Low friction
Piston rod bellow
Without cushion
Without cushion, low friction
Double ended piston rod
Double ended piston rod, special wiper/seal
Four-position cylinder
Extended piston rod
Substitute
Substitute
None
X
Substitute
**A/8*****/IU/****/***
IT
IU
Extension
(mm)
W5 Extended piston rod
**A/8*****/W5/****/*** Extension
(mm)
Note: If postion ist not required, disregard option position within part number e.g. RA/802100/M/100. For combinations of cylinder variants consult our technical service.
For example: Please note that heat resistant seals are not available for all variants. This option selector explains only the cylinder variants.
Additional variants/options are not possible.
Detail’s see table on page 4.
None
W1
X1
G
W
X3
J
W3
08/20
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH en 1.5.220.05
Cylinder with Profile barrel ø 32 ... 125 mm Cylinder with Round barrel ø 32 ... 320 mm
24
11 + 20 24
12
Mountings
Model A AK B, G C D D2 F FH H UH
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 1 10 2 3 4 5 6 7 8 9 10 19 20
1 2 3 4 5 6 7 8 9 10 17 18 19 1 1 1 2 1 2 3 2 4 1 4 3 4 2 5 4 5 11 3 6 5 6 12 4 7 6 7 13 5 8 7 8 14 9 8 9 15 7 9 16 10 17 18 19 11 20 12 13 21 22 23 24 25 26 27 28 29
11 12 13 14 20 16 17 18
ø
32
19 20 26 27 28 11 29 11 12 12 13 13 11 14 12 20 16 21 17 22 18 23 19 24 20 25 20 26 27 28 29 21 22 23 24 25 26 27 28 29 38 39
20
30
21
31
22
32
23
33
24
34
25
35
26
36
27
37
40
50
63
28
38
29 36
QM/8050/35
39
QM/8040/38
QM/8050/38
QM/8050/38
20
30 30
20
30
21
31
21
32
22 23
31
23
32
24
QA/8050/21
32 33 33 34
24
QA/8050/23
34
25
35
25
35
26
36
26
36
27 27
34
28
QA/8050/42
37 37 38
28
38
29 29
36 38
27
QM/8050/25
39 39 37
29
39
28
38
29
QA/8050/34
39
38 30 39 31 32 33 34 35 36 37 38 39
QA/8050/28
QA/8063/28
QA/8050/40
QA/8063/40
80
100
125
160
200
250
320
QM/8080/35
QM/8080/35
QM/8125/35
QM/8160/35
QM/8160/35
QM/8250/35
QM/8320/35
QM/8080/38 QA/8080/22
QM/8080/38 QA/8100/22
QM/8125/38 QM/8125/22
QM/8160/38 QM/8160/22
-
-
QM/8160/38 QM/8200/22
QM/8250/22
QM/8320/22
QA/8080/21
QA/8100/21
QM/8125/21
QM/8160/21
QM/8200/21
QM/8250/21
QM/8320/21
QA/8080/23 QA/8080/42
QA/8100/23 QA/8100/42
QM/8125/23
QM/8160/23
QA/8125/42
QA/8160/42
QM/8200/23 QA/8200/42
QM/8250/23 -
QM/8320/23 -
QM/8080/25
QM/8080/25
QM/8125/25
QM/8160/25
QM/8160/25
QM/8250/25
QM/8320/25
-
-
-
QA/8080/34
QA/8100/34
-
QA/8125/34
QA/8080/28 QA/8080/40
QA/8100/28 QA/8100/40
QM/8125/28
QM/8160/28
QA/8125/40
QA/8160/40
QM/8200/28 QA/8200/40
QM/8250/28 -
QM/8320/28 -
UH S SW UF UR R SS US Groove key Valve mounting kit
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 1 16 1 2 17 2 3 18 3 4 19 4 5 20 5 6 6 7 7 8 1 8 9 2 9 10 3 10 4 5 6 7 1 8 2 9 3 10 4 1 5 2 6 3 7 4 8 5 9 6 7 8 9 10
20
30
21 22 23 1 24 2 25 3 26 4 27 5 28 15 29 16 1 16 2 17 11 18 4 19 5 20 6 14 7 15 8 5 9 6 10 7 8 8 9 9 11 10 16 17 18 19 20 18 19 20
31 32
ø
32
40
50
63
33 11
20
30
34 20
21
31
35 13
31
32
36 21
31
33
37
32
34
38 23
33
35
39 24
34
36
20
30
25
35
37
12
21
26
36
38
13
22
32
27
37
39
21
23
33
28
38
22
24
34
29 23
35
22
24
23
36
25
37
24
26
38
25
27
39
26
28
27
37
29
28
M/P72816
38
20
29
39
25
35
26
36
27
37
28
38
29
39
27 28 29
31 32 33 34 35 36 37 38 39
80
100
125
160
200
250
320
-
-
-
PQA/802080/40 QA/8063/41
PQA/802100/40 QA/8100/41
-
PQA/802125/40 QA/8100/41
QA/8160/41
-
-
QA/8160/41
M/P19497
M/P19498
M/P19499
M/P19679
M/P19683
M/P19446
M/P19447
QM/8080/32
QM/8080/32
QM/8125/32
QM/8160/32
QM/8160/32
QM/8250/32
QM/8320/32
QA/8080/33 QA/8080/27
QA/8100/33 QA/8100/27
QM/8125/33
QM/8160/33
QM/8125/27
QM/8160/27
QM/8200/33 QM/8200/27
QM/8250/33 -
QM/8320/33 -
M/P19935
M/P19936
M/P19937
M/P19938
-
-
M/P19939
M/P40314
M/P40315
M/P71355
M/P71356
-
-
M/P71357
-
-
-
M/P72816
M/P72816
-
M/P72816
More Details see page 32 & 33
3
4
5
6
7
1
Pos.
2
Style
B, G
C
R
UR
D
SW
US
Standard
Clear anodised aluminium
Galvanized steel (ø 32 ... 100 mm),
Painted steel (ø 125 ... 320 mm)
Die-cast aluminium
Galvanized aluminium
Inner ring: steel, Outer ring: brass
Die-cast aluminium
Bolt: galvanized steel (martensitic)
Circlip: galvanized steel
Die-cast aluminium
Galvanized aluminium
Inner ring: steel, Outer ring: brass
Pos. Style
8
9
10
11
12
13
14
D2
FH
A
H
S
Standard
Ø32...125 Die-cast aluminium, Ø160...200
Painted cast iron, Bolt: stainless steel (martensitic), Circlip: galvanized steel
Cast iron
Galvanized steel
Cast iron
Clear anodised aluminium
Bearing: brass
Galvanized steel Valve mounting kit
Groove key Steel
Pos.
15
16
17
18
19
20
24
Style
F
SS
UF
AK
51, 61, 81,
85
UH
UH
Standard
Galvanized steel, Bolt: galvanized steel, Circlip: Galvanized steel
Painted cast iron
Galvanized steel,
Inner ring: steel, Outer ring: brass
Galvanized steel
Anodised aluminium
Cast iron
Anodised aluminium en 1.5.220.06
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH 08/20
Guide blocks
Guide blocks - plain bearings Guide blocks - roller bearings Guide blocks - plain bearings, long coupling
Guide blocks - plain bearings, short coupling
1 2 3 4 5 6 1 7 2 8 3 9 4 10 5 6 1 7 2 8 3 9 4 10 5 6 1 7 2 8 3 9 4 10 5 6 7 8 9 10
11 12 13 14 15 16 11 17 12 18 13 19 14 20 15 16 11 17 12 18 13 19 14 20 15 16 11 17 12 18 13 19 14 20 15 16 17 18 19 20
20
30
21
31
22
32
23
33
24
34
25
35
20
30
26
36
21
31
ø
27
32
37
22
32
28
38
23 24
QA/8032/51/*
33
29
39 34
25
35
20
30
26
36
21
31
27
37
22
32
28 23
33
29
QA/8032/61/*
38 39
24
34
25
35
20
30
26
36
21
31
27
37
22
32
28
QA/8032/81/*
38
23
33
29
39
24
34
25
35
26
36
27
37
28
38
29
39
50 QA/8050/51/* QA/8050/61/* QA/8050/81/* QA/8050/85/*
63
80
QA/8063/51/*
QA/8080/51/*
QA/8063/61/*
QA/8080/61/*
QA/8063/81/*
QA/8080/81/*
100 QA/8100/51/* QA/8100/61/* QA/8100/81/*
*) Insert standard stroke length: 50, 100, 160, 200, 250, 320, 400 and 500 mm, use the next bigger standard stroke.
QA/8063/85/*
QA/8080/85/*
QA/8100/85/*
Accessories for Profile (ø 32 ... 125 mm) & Round barrel (ø 32 ... 320 mm)
Model
Profile barrel
Model
Round barrel
Port size
Banjo flow control
Straight fitting Elbow fitting
Sevice kit
Service kit for Round and Profile barrel
ø
PRA/802032/M/*
PRA/802040/M/*
PRA/802050/M/*
PRA/802063/M/*
RA/802032/M/*
RA/802040/M/*
RA/802050/M/*
RA/802063/M/*
PRA/802080/M/* RA/802080/M/*
PRA/802100/M/* RA/802100/M/*
-
PRA/802125/M/* RA/802125/M/*
RA/8160/M/*
32
40
50
63
80
100
125
160
G1/8
G1/4
G1/4
G3/8
G3/8
G1/2
G1/2
C0K510618
C0K510628
C0K510828
C0K510838
C0K511038
C0K511248
C0K511248
G3/4 M840 (Inline)
-
RA/8200/M/*
RA/8250/M/*
200
250
G3/4 M840 (Inline)
G1 M855 (Inline)
RA/8320/M/* 320 G1 M855 (Inline)
For alternative fitting types please contact the technical service.
-
-
-
C02250618
C02250628
C02250828
C02250838
C02251038
C02251248
-
C02251248
ø
80
100
125
160
32
40
50
63
200
250
320
Magnetically operated switches
M/50/**
Page 25 & 26
1
Groove cover
2 3
Switch mounting brackets for
4 5 6
TQM/31,
QM/32, QM/132
7 8 9
Switch mounting brackets for
10
11 12 13 14 15 16 17 18 19 20
20 21 22 23 24 25 26 27 28 29
31 32 33 34 35 36 37 38 39
-
-
M/P72725/1000
M/P72725/1000
M/P72725/1000
M/P72725/1000
-
-
M/P72725/1000
M/P72725/1000
QM/27/2/1
QM/27/2/1
QM/27/2/1
QM/27/2/1
QM/27/2/1
QM/27/2/1
QM/27/2/1
QM/27/2/1
QM/27/2/2
QM/27/2/3
QM/31/032/22
QM/31/032/22
QM/31/032/22
QM/31/080/22
QM/31/080/22
QM/31/080/22
QM/31/160/22
QM/31/160/22
QM/31/250/22
QM/31/320/22
-
-
-
C02470618
C02470628
C02470828
C02470838
C02471038
C02471248
-
C02471248
QM/140
Page 31
Switch mounting brackets for
QM/140
Page 32
-
-
-
QM/140/010/22
QM/140/010/22
QM/140/010/22
QM/140/010/22
-
-
QM/140/010/22
QM/140/010/22
ø
80
100
125
160
32
40
50
63
200
250
320
QA/8032/00
QA/8040/00
QA/8050/00
QA/8063/00
QA/8080/00
QA/8100/00
QA/8125/00
QA/8160/00
QA/8200/00
QA/8250/00
QA/8320/00
08/20
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH en 1.5.220.07
Basic dimensions
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
Standard Cylinder
ø 32 - 125 mm
ZJ + #
I8 + #
A WH
I2 PL
G l7
KW I12 VD
EE
G
PL VA
E
TG
KV
Dimensions in mm
Projection/First angle
SW
EE
1
BG
I3 BH
BG BH
2 en 1.5.220.08
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH 08/20
Basic dimensions
PRA/802000/M, RA/802000/M, RA/8000, RA/8000/M
Standard Cylinder
ø 160 - 320 mm
A
KW l12
WH l2
VD
G
PL l7
ZJ + # l8 + #
G
PL
VA
MM KK
EE EE
BG
BH
E
TG
KV
Dimensions in mm
Projection/First angle
Model Profile barrel
ø 32 ... 125 mm
Model Round barrel
ø 32 ... 125 mm
Model Round barrel
ø 160 ... 320 mm
3
# Stroke
$ Piston rod extension
1 Cushion screw
2 ø 80 ... 320 mm
3 M/50 switches can be mounted flush with the profile
For additional information please contact the technical service or http://www.imi-precision.com
08/20
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH en 1.5.220.09
ø A -0,5 ø B d11
32 22
40 24
50 32
63 32
80 40
100 40
125 54
160 72
200 72
250 84
320 96
45
55
60
65
30
35
40
45
75
90
110
ø BA d11
45
55
60
65
30
35
40
45
75
90
110
BG min
17
17
20
28,5
16
16
16
16
28,5
35
30
8
19
19
24
6
8
BH
6
32
32
36
46
47
53
65
75
95
E
113
140
183,5
224
280
350
EE
G1/8
G1/4
G1/4
G3/8
G3/8
G1/2
G1/2
G3/4
G3/4
G1
G1
G
29
34,5
33
36,5
42
42
54
50
50
58
60
KK
M10 x 1,25 17
M12 x 1,25
M16 x 1,5
M16 x 1,5
19
24
24
M20 x 1,5 30
M20 x 1,5 30
M27 x 2
M36 x 2
M36 x 2
M42 x 2
M48 x 2
KV
41
55
55
65
75
KW
ø
32 M 6
40 M 6
50
63
80 M 10
100 M 10
125
160
RT
M 8
M 8
M 12
M 16
200 M 16
250 M 20
SW
10
13
17
17
22
22
27
36
36
41
U1
4,6
5,8
8,7
10
12
9
12
19
19
22
U2
6,3
9,2
10,8
12,8
14,5
14,5
17
16
16
30
VA
3,5
3,5
3,5
3,5
3,5
3,5
5,5
4
5
7
VD
6
6
6
6
6
6
8
15
15
13
WH
26
30
37
37
46
51
65
80
95
105
ZJ
120
135
143
158
174
189
225
260
275
305
-
-
-
Model
Profile barrel at
0 mm
PRA/802032/M/* 0,49 (kg)
PRA/802040/M/* 0,69 (kg)
PRA/802050/M/* 1,09 (kg)
PRA/802063/M/* 1,54 (kg)
PRA/802080/M/* 2,64 (kg)
PRA/802100/M/* 3,66 (kg)
PRA/802125/M/*
-
-
-
6,16 (kg)
320 M 24 55 22 30 7 13 120 340 -
* Please insert stroke length.
Basic Dimension are also for cylinder variants or for different piston rod material
LPRA/802000/M, LRA/802000/M, LRA/8000/M - Low Temperature Cylinder
TPRA/802000/M, TRA/802000/M, TRA/8000/M - High Temperature Cylinder
HPRA/802000/M, HRA/802000/M, - Hydraulic Cylinder
PRA/802000/W2, RA/802000/W2 - Cylinder with Special Wiper - Seal
PRA/802000/X2, RA/802000/X2, RA/8000/X2 - Low Friction Cylinder
PRA/802000/MU, RA/802000/MU, RA/8000/MU - Cylinder with Extended Piston Rod
PRA/802000/W6, RA/802000/W6 - Cylinder with Extended Piston Rod and Special Wiper - Seal
PRA/802000/MW, RA/802000/MW, RA/8000/MW - Cylinder without Cushioning
PRA/802000/X4, RA/802000/X4, RA/8000/X4 - Low Friction Cylinder without Cushioning
RA/8000/W1 - Cylinder with Special Wiper - Seal without Magnet
RA/8000/X1 - Low Friction Cylinder without Magnet
RA/8000/IU - Cylinder with Extended Piston Rod without Magnet
RA/8000/W5 - Cylinder with Extended Piston Rod and Special Wiper - Seal without Magnet
RA/8000/W - Cylinder without Cushioning without Magnet
RA/8000/X3 - Low Friction Cylinder without Cushioning without Magnet
18
21
24
10
10
13,5
18
8
8
5
6
L2
67
80
90
33
35
44
58
19,5
22
25
25
L3 per
25 mm
-
-
-
0,06 (kg)
0,08 (kg)
0,12 (kg)
0,13 (kg)
0,20 (kg)
0,23 (kg)
-
0,45 (kg)
-
-
-
-
5
5
4
4
-
-
-
L7
1,8
3,8
1,8
10
6,6
5,6
1,6
3,6
10
4,5
4,5
L8
128
138
160
180
94
105
106
121
180
200
220
L12
13
16
10
10
8
8
5,5
6,5
16
20
24
Model
Round barrel at
0 mm
RA/802032/M/* 0,46 (kg)
RA/802040/M/* 0,65 (kg)
RA/802050/M/* 1,02 (kg)
RA/802063/M/* 1,46 (kg)
RA/802080/M/* 2,54 (kg)
RA/802100/M/* 3,50 (kg)
RA/802125/M/* 5,92 (kg)
RA/8160/M/* 14,9 (kg)
RA/8200/M/*
RA/8250/M/*
RA/8320/M/*
21,7 (kg)
32,6 (kg)
59,8 (kg)
ø MM h9
25
25
32
40
12
16
20
20
40
50
63
PL TG per
25 mm
0,06 (kg)
0,08 (kg)
0,12 (kg)
0,14 (kg)
0,21 (kg)
0,23 (kg)
0,34 (kg)
0,55 (kg)
0,60 (kg)
0,92 (kg)
1,46 (kg)
26
28
31
29,7
27,7
39,7
25
15
21,5
22,7
24,2
72
89
110
140
32,5
38
46,5
56,5
175
220
270 en 1.5.220.010
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH 08/20
Cylinder variants
..../802000/MX; /MUX; /MWX; /W2X; /W6X; /X2X; X4X
Cylinder with Female Piston Rod Thread
I12
SW
Dimensions in mm
Projection/First angle
T2
AF
T1
ø
32
40
50
12
16
AF
12
ø D1
6,4
8,4
10,5
63
80
100
125
16
20
20
32
10,5
13
13
17
For missing dimensions please see page 8, 9 and 10
M10
M12
M12
M16
KF
M6
M8
M10
8
10
10
13 l12
5,5
6,5
8
20
25
25
32
ø MM h9
12
16
20
17
22
22
27
13
17
SW
10
21
25
25
38
16
21
T1
16
4,7
6,1
6,1
8
T2
2,6
3,3
4,7
Cylinder variants
PRA/802000/N2, RA/802000/N2 – Cylinder with Non-Rotating Piston Rod
PRA/802000/N2X, RA/802000/N2X – Cylinder with Non-Rotating Piston Rod and Female Piston Rod Thread
A
A
SW
ø
SW max. Torque (Nm) Model
Profile barrel
32
40
50
63
10
13
16
16
1
0,5
1,5
1,5
PRA/802032/N2/*
PRA/802040/N2/*
PRA/802050/N2/*
PRA/802063/N2/*
80 21 2,5 PRA/802080/N2/*
100 21 2,5 PRA/802100/N2/*
* Please insert stroke length; Maximum stroke: 1000 mm; For missing dimensions please see page 8, 9 and 10
08/20
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH
Model
Round barrel
RA/802032/N2/*
RA/802040/N2/*
RA/802050/N2/*
RA/802063/N2/*
RA/802080/N2/*
RA/802100/N2/* en 1.5.220.011
Cylinder variants
PRA/802000/JM, RA/802000/JM, RA/8000/JM, RA/8000/J, PRA/802000/W4, RA/802000/W4,
Dimensions in mm
Projection/First angle
RA/802000/W3 – Cylinder with Double Ended Piston Rod
PRA/802000/JMX, RA/802000/JMX, PRA/802000/W4X,
RA/802000/W4X – Cylinder with Double Ended Piston Rod and Female Piston Rod Thread
WH
ZM + 2x #
I8 + #
63
80
100
125
ø
32
40
50
L8
94
105
106
121
128
138
160
WH
26
30
37
37
46
51
65
160
200
250
320
180
180
200
220
80
95
105
120
* Please insert stroke length; For missing dimensions please see page 8, 9 and 10
195
220
240
290
ZM
146
165
180
340
370
410
460 -
-
-
-
Model Profile barrel
PRA/802032/JM/*
PRA/802040/JM/*
PRA/802050/JM/*
PRA/802063/JM/*
PRA/802080/JM/*
PRA/802100/JM/*
PRA/802125/JM/*
Cylinder variants
PRA/802000/MT, RA/802000/MT, RA/8000/MT, RA/8000/IT – Four Position Cylinder
PRA/802000/MTX, RA/802000/MTX – Four Position Cylinder and Female Piston Rod Thread
1 l8 + #1 l10 + #1 + #2 l11 l8 + #2
# Stroke
Model Round barrel
RA/802032/JM/*
RA/802040/JM/*
RA/802050/JM/*
RA/802063/JM/*
RA/802080/JM/*
RA/802100/JM/*
RA/802125/JM/*
RA/8160/JM/*
RA/8200/JM/*
RA/8250/JM/*
RA/8320/JM/*
ø l8 l10 l11 Type
Mounting kit
Model
Profile barrel
# Stroke
Model
Round barrel
80
100
125
160
32
40
50
63
94
105
106
121
128
138
160
180
267
297
318
344
386
416
494
532
27
27
32
28
38
38
44
12
QA/802032/55
QA/802040/55
QA/802050/55
QA/802063/55
QA/802080/55
QA/802100/55
QA/802125/55
-
PRA/802032/MT/*/**
PRA/802040/MT/*/**
PRA/802050/MT/*/**
PRA/802063/MT/*/**
PRA/802080/MT/*/**
PRA/802100/MT/*/**
PRA/802125/MT/*/**
RA/802032/MT/*/**
RA/802040/MT/*/**
RA/802050/MT/*/**
RA/802063/MT/*/**
RA/802080/MT/*/**
RA/802100/MT/*/**
RA/802125/MT/*/**
RA/8160/MT/*/**
200 180 560 10 RA/8200/MT/*/**
* Please insert stroke length 1; ** Please insert stroke length 2
Maximum stroke = stroke 1 + stroke 2; ø 32 = 700 mm, ø 40 = 1000 mm, ø 50 = 1000 mm, ø 63 = 900 mm, ø 80 = 1200 mm, ø 100 = 1100 mm, ø 125 = 1200 mm,
ø 160 = 1200 mm, ø 200 = 1100 mm; For missing dimensions please see page 8, 9 and 10
1 Mounting kit to connecting two standard cylinder to build four position cylinder en 1.5.220.012
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH 08/20
Cylinder variants Dimensions in mm
PRA/802000/MG, RA/802000/MG, RA/8000/MG, RA/8000/G – Cylinder with Piston Rod Bellows
PRA/802000/MGX, RA/802000/MGX – Cylinder with Piston Rod Bellows and Female Piston Rod Thread
B 1
ø ø A Max. stroke per bellow
Piston rod extention
B for first bellow
80
100
125
160
32
40
50
63
40
63
63
63
80
80
80
116
60
145
145
145
250
250
250
350
30
50
40
40
50
50
50
70
200
250
116
116
350
350
70
70
320 143 500 110
* Please insert stroke length; Maximum stroke: ø 32 = 1860 mm, ø 40 ... 320 = 2000 mm
For missing dimensions please see page 8, 9 and 10 for further bellows
45
45
45
60
25
32
32
32
60
60
100
1 Piston rod without bellows
Model
Profile barrel
-
-
-
PRA/802032/MG/*
PRA/802040/MG/*
PRA/802050/MG/*
PRA/802063/MG/*
PRA/802080/MG/*
PRA/802100/MG/*
-
PRA/802125/MG/*
Model
Round barrel
RA/802032/MG/*
RA/802040/MG/*
RA/802050/MG/*
RA/802063/MG/*
RA/802080/MG/*
RA/802100/MG/*
RA/802125/MG/*
RA/8160/MG/*
RA/8200/MG/*
RA/8250/MG/*
RA/8320/MG/*
08/20
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH en 1.5.220.013
Cylinder variants
PRA/802000/L4, RA/802000/L4 – Cylinder with Locking unit (Passive)
PRA/802000/L4X, RA/802000/L4X – Cylinder with Locking unit (Passive) and
Female Rod
PRA/802000/L8, RA/802000/L8 – Cylinder with Locking unit (Passive) and Special Wiper Seal
PRA/802000/L8X, RA/802000/L8X – Cylinder with Locking unit (Passive) and Special Wiper
Seal and Female Piston Rod Thread
Spring force on removal of the signal to the unit.
Operating pressure for locking unit: 4 … 10 bar
Dimensions in mm
Projection/First angle
AB l8 + #
ø AJ
EE
VD AD
WH
AF
AH
AE
AG
AK
AL
TG
E
63
80
100
125
ø
32
40
50
ø
AB
32
35,5
49
49
62
65
85
L8
15
16
12
16
AD
12
18
27
RT
15
16
AE
8
10
15
16
25
TG
AF
40
46
54
55
70
70
95
VD
32
40
50
63
94
105
106
121
M6
M6
M8
M8
32,5
38
46,5
56,5
12
12
10
10
80
100
128
138
M10
M10
72
89
20
23
33
38
125 160 M12 110 32
* Please insert stroke length
Maximum stroke: 2600 mm
*1) with Cartridge
For missing dimensions please see page 8, 9 and 10
65
16
18
22
20
7,5
10
10
11
AG
4,2
4,5
11,5
WH
70
90
92
122
AH
48
55
70
38
53
53
65
ø AJ
25
24
30
Locking force
600
1000
1500
2200
5000
5000
7000
Spare part
Locking unit *1)
QA/8032/59
QA/8040/59
QA/8050/59
QA/8063/59
QA/8080/59
QA/8100/59
QA/8125/59
AK
M 5
M 5
M 6
M 8
M 8
M 8
M 10
32
44
60
75
AL
16
21
24
Spare part
Cartridge
QA/8032/63
QA/8040/63
QA/8050/63
QA/8063/63
QA/8100/63
QA/8100/63
QA/8125/63
86
118
118
140
AM
59
61,5
75,5
12
16
16
20
AN
8
10
12
45
45
55
60
ø B e11 E
30 48
35
40
56
68
82
100
120
140
Model
Profile barrel
PRA/802032/L4/*
PRA/802040/L4/*
PRA/802050/L4/*
PRA/802063/L4/*
PRA/802080/L4/*
PRA/802100/L4/*
PRA/802125/L4/*
85
105
130
150
E1
50
58
70
Model
Round barrel
RA/802032/L4/*
RA/802040/L4/*
RA/802050/L4/*
RA/802063/L4/*
RA/802080/L4/*
RA/802100/L4/*
RA/802125/L4/*
# Stroke
EE
G1/8
G1/8
G1/8
G1/8
G1/8
G1/8
G1/8 en 1.5.220.014
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH 08/20
Mountings
Front or rear stud mounting A
Piston rod swivel
AK
Dimensions in mm
Projection/First angle
3 2 4 1
T
BB
L
4°
SW
4°
L2
B1
L
F
ø
32/40
BB
17
50/63 23
80/100 28
125 34
160/200 42
250
320
50
60
M12
M16
M20
M24
DD
M6
M8
M10
Front flange B, G
Conforms to ISO 15552, type MF1 and MF2
60
70
80
90
L
30
40
45
6
8
10
12
4
5
SW
3
12
15
8
10
5
6
T (min) (kg)
3,5 0,02
0,05
0,08
0,14
0,31
0,92
1,46
Model (A)
QM/8032/35
QM/8050/35
QM/8080/35
QM/8125/35
QM/8160/35
QM/8250/35
QM/8320/35
ø KK B1
M10 x 1,25 5
M12 x 1,25 6
F L L2 SW
1 2 3 4
(kg) Model (AK)
26 73 20 19 12 17 30 0,20 QM/8025/38 32
40
50/63
80/100
125
M16 x 1,5
M20 x 1,5
M27 x 2
8
10
26 77 24 19 12 19 30 0,20 QM/8040/38
34 106 32 30 19 24 42 0,65 QM/8050/38
42 122 40 30 19 30 42 0,72 QM/8080/38
13,5 40 147 54 40 24 41 55 1,70 QM/8125/38
160/200 M36 x 2 18 78 251 72 50 36 55 75 5,4 QM/8160/38
Foot mounting C
Conforms to ISO 15552, type MS1
UF
TF
MF FB
AU AO ø AB
TR
E
75
100
120
140
E
50
55
65
180
220
280
350
63
80
100
125
ø
32
40
50
160
200
250
320
18
22
26
33
14
16
9
12
9
9
ø FB MF
7 10
10
12
12
16
16
20
20
25
25
30
50
63
75
90
R
32
36
45
115
135
165
200
125
154
186
224
UF
80
90
110
280
320
395
475
100
126
150
180
TF
64
72
90
230
270
330
400
0,27
0,63
0,89
1,59
(kg)
0,10
0,12
0,21
2,65
4,47
7,09
12,84
Model (B, G)
QA/8032/22
QA/8040/22
QA/8050/22
QA/8063/22
QA/8080/22
QA/8100/22
QM/8125/22
QM/8160/22
QM/8200/22
QM/8250/22
QM/8320/22
63
80
100
125
ø
32
40
50
160
200
250
320
18
22
26
33
10
12
14,5
16
ø AB AH
7 32
10
10
36
45
50
63
71
90
115
135
165
200
6
9
5
6
4
5
AT
4
8
9
10
16
12
19
19
20
AO
8
9
10
20
30
35
45
32
41
41
45
AU
24
28
32
60
70
75
85
50
63
75
90
TR
32
36
45
115
135
165
200
74
98
115
140
E
48
53
64
180
220
280
350
3,5
5,25
9,5
22
(kg) Model (C)
0,15 QA/8032/21
0,18 QA/8040/21
0,30 QA/8050/21
0,39 QA/8063/21
0,80 QA/8080/21
0,95
2,40
QA/8100/21
QM/8125/21
QM/8160/21
QM/8200/21
QM/8250/21
QM/8320/21
08/20
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH en 1.5.220.015
Rear clevis D
Conforms to ISO 15552, type MP2
LH
UB
CB H 14
Rear clevis D2
Conforms to ISO 15552, type AB6
CP
CG H 14
Dimensions in mm
Projection/First angle
FL
L
FM
SR
R4
MR
160
200
250
320
63
80
100
125
ø
32
40
50
90
90
110
120
40
50
60
70
CB H14 ø EKe8 FL
26 10 22
28
32
12
12
25
27
16
16
20
25
30
30
40
45
55
60
70
80
32
36
41
50
37
40
47
50
22
22
27
29
16
17
L
13
LH
52
60
68
79
99
15
15
119 20
140 25
182
182
30
30
218 40
238 45
12
12
MR UB
9 45
52
60
170
170
200
220
70
90
110
130
(kg) Model (D)
0,11 QA/8032/23
0,16
0,22
QA/8040/23
QA/8050/23
4,3
6,1
19
30,5
0,34
0,54
QA/8063/23
QA/8080/23
0,90 QA/8100/23
2,70 QM/8125/23
QM/8160/23
QM/8200/23
QM/8250/23
QM/8320/23
63
80
100
125
ø
32
40
50
160
200
21
25
25
37
16
21
CGH14 CP
14 34
40
45
51
65
75
97
43
43
122
122
4,3
4,3
4,3
6,3
B3
3,3
4,3
4,3
6,3
6,3
16
20
20
30
12
16
ø JK h9 FM SR
10 22 11
25
27
12
R4
17
20
14,5 22
32
36
41
50
18
22
22
30
25
30
32
42
35
35
55
60
36
38
46
49
(kg) Model (D2)
0,20 QA/8032/42
0,23 QA/8040/42
0,36 QA/8050/42
0,55 QA/8063/42
0,90 QA/8080/42
1,45 QA/8100/42
2,7 QA/8125/42
4,3
6,1
QA/8160/42
QA/8200/42
Piston rod clevis F
Conforms to DIN ISO 8140
Front or rear detachable trunnion FH
Conforms to VDMA 24562 part 2, type MT 5/6
L 1
LE
CE
RK
CL
CM
R
ER
ø
32
40
KK CE ø CKh11 CL CM ER LE RK (kg) Model (F)
M10 x 1,25 40 10 20 10 16 20 27,5 0,09 QM/8025/25
M12 x 1,25 48 12 24 12 19 24 33,5 0,13 QM/8040/25
50/63 M16 x 1,5 64 16
80/100 M20 x 1,5 80 20
125 M27 x 2
160/200 M36 x 2
110 30
144 35
250
320
M42 x 2
M48 x 2
168 40
192 50
32 16
40 20
55 30
70 35
85 40
96 50
25 32
32
45 54 73,5 1,35
57 72
77
42
40 51
94
88 96 123
0,33 QM/8050/25
0,67 QM/8080/25
3
84 107 6,4
8,7
QM/8125/25
QM/8160/25
QM/8250/25
QM/8320/25
ø ø D H11 L1
32 30 16
40 35
50 40
20
24
63 45
80 45
100 55
125 60
24
28
38
50
2
2
1,6
1,6
1
R
1,6
1,6
20
20
25
25
16
16
ø TDe9 TL
12 12
16
16
20
20
25
25
TL
D H11
TM h14
90
110
132
160
TM h14 UW1 (kg) Model (FH)
50 45 0,20 QA/8032/34
63
75
55
65
0,38 QA/8040/34
0,60 QA/8050/34
75
100
120
145
1,10
1,90
QA/8063/34
QA/8080/34
3,50 QA/8100/34
6,50 QA/8125/34 en 1.5.220.016
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH 08/20
Centre trunnion – H
Conforms to ISO 15552, type MT4
Used for cylinder model with round barrel
1
R
Adjustable trunnion mounting UH
Conforms to ISO 15552, type MT4
Dimensions in mm
Projection/First angle
Used for cylinder model with round barrel
2
1
R
TK TL TM h 14
1 Grease nipple from ø 125 mm to ø 320 mm
ø R max.
32
40
50
63
80 1,6
100 2
125 2
160 2,5
1
1,6
1,6
1,6
ø TD e9
12
16
16
20
20
25
25
32
TK TL TM h14
20 12 50
24 16 63
28 16 75
28 20 90
28 20 110
38 25 132
UW XV
50
58
70
80 min.
65
84
87,5
XV max.
+ #
81
76,5 88,5
96
107,5
100 102 118
126 112 128
50 25 160 152 144 146
50 32 200 192 155 185
(kg) Model (H)
0,16
2,3
3,3
5,3
QA/8032/28
0,35 QA/8040/28
0,65 QA/8050/28
0,85 QA/8063/28
1,2 QA/8080/28
QA/8100/28
QM/8125/28
QM/8160/28
200 2,5
250 3,2
32
40
50 32 250
60 40 320
240 170 200
318 193 217
9,4 QM/8200/28
18 QM/8250/28
320 3,2 50 70 50 400 400 215 245 30 QM/8320/28
Note: Style ‘H’: These mountings are only supplied assembled complete with the cylinder. Unless otherwise specified, units will be supplied with dimension
‘XV min’. plus half the stroke length. ‘XV’ = Distance from the piston rod s houlder to the centre of the mounting (Please see drawing).
Not for use on profile options.
This item is suited to all loads including heavy duty loads.
This item is for replacement only
H mounting must be initially ordered with the cylinder.
Adjustable trunnion mounting UH
Conforms to ISO 15552, type MT4
Used for cylinder model with profile barrel
TK TL TM TL
TK TL TM h 14
1 Grease nipple from ø 125 mm to ø 200 mm
2 Locking screws
Torque max: ø 32 & 40 mm = 6 Nm; ø 50 & 63 mm = 10 Nm;
ø 80 & 100 mm = 15 Nm; ø 125 mm = 25 Nm; ø 160 & 200 mm = 40 Nm
ø R max.
32 1
40 1,6
50 1,6
63 1,6
80 1,6
100 2
125 2
160 2,5
ø TD e9
12
16
16
20
20
25
25
32
TK TL TM h14
20 12 50
24 16 63
28 16 75
28 20 90
28 20 110
38 25 132
50 25 160
50 32 200
UW XV
50
58
70
80 min.
65
84
87,5
126 112
152 144
192 155
XV max.
+ #
81
(kg) Model (UH)
0,16 QA/8032/40
76,5 88,5 0,35 QA/8040/40
96
107,5
100 102 118
128
146
185
0,65 QA/8050/40
0,85 QA/8063/40
1,2
2,3
3,3
5,3
QA/8080/40
QA/8100/40
QA/8125/40
QA/8160/40
200 2,5 32 50 32 250 240 170 200 9,4 QA/8200/40
Style ‘UH’: It is most important that the locking screws which secure the mounting to the tie rod are tightened to the torque figures shown in the table below. For maximum energy input, consult our Technical Service.
Unless otherwise specified, units will be supplied with dimension ‘XV min’ plus half the stroke length. ‘XV’ = Distance from the piston rod shoulder to the centre of the mounting (Please see drawing).Not for use on profile options.This item is adjustable and suited to normal loads.
#
Stroke
XV min.
XV
XV max. + #
R
R
Trunnion support S
Conforms to ISO 15552, type AT4
ø R ø TD e9
32 1 12
40 1,6 16
50 1,6 16
63 1,6 20
80 1,6 20
100 2 25
125 2 25
TK max.
25
28
28
36
36
48
50
TL h14
TM h14
UW XV min.
XV max.
+ #
(kg) Torque
(Nm)
12 50 58 67,5 78,5 0,06 1,3
16 63 65
16 75 80
78,5 86,5 0,11 1,3
84 96 0,16 4
20 90 96 91,5 103,5 0,32 4
20 110 116 106
25 132 140 117
25 160 163 144
114 0,37 6,5
0,72 6,5
0,96 14
Model (UH)
PQA/802032/40
PQA/802040/40
PQA/802050/40
PQA/802063/40
PQA/802080/40
PQA/802100/40
Unless otherwise specified, units will be supplied with dimension ‘XV min’. plus half the stroke length. ‘XV’ = Distance from the piston rod shoulder to the centre of the mounting (Please see drawing).
123
146 PQA/802125/40
Style ‘UH’: It is most important that the locking screws which secure the mounting to the tie rod are tightened to the torque figures shown in the table below. For maximum energy input, consult our Technical Service.
This item is adjustable and suited to normal loads.
ø
32
40/50
63/80
A B
1 2
32 46 18
36 55 21
42 65 23
C ø
D1H7
10,5 12
12 16
13 20
100/125 50 75 28,5 16,5 25
160/200 60 92 39 21,5 32
ø D 2
A
B 1
ø D 3
C
B 2
F x 45°
ø
D2
9
ø
D3
6,6 11 1
15
F x
45°
1,6
1
H
2
T1 (kg) Model
30 15 6,8 0,10 QA/8032/41
36 18 9 0,14
(S)
QA/8040/41
11 18 1,6 40 20 11
14 20 2 50 25 13
0,18 QA/8063/41
0,34 QA/8100/41
18 26 2,5 60 30 15,5 1,9 QA/8160/41
08/20
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH en 1.5.220.017
Universal piston rod eye UF
Conforms to DIN ISO 8139
Universal rear eye UR
Conforms to ISO 15552, type MP6
Dimensions in mm
Projection/First angle
CN H 7
CE
EN h12
EP
Z
EX
Z
R1
DL
ER LE A
MS
ø Thread
KK
A CE ø
CNH7
32
40
M10 x 1,25 20 43 10
M12 x 1,25 22 50 12
50/63 M16 x 1,5 28 64
80/100 M20 x 1,5 33 77
16
20
125 M27 x 2
160/200 M36 x 2
250
320
M42 x 2
M48 x 2
51
56
65
110
125
60 142
30
35
40
160 50
EN h12
ER LE Z (kg) Model (UF)
14
16
21
25
14 15 9° 0,09 QM/8025/32
16 17 13° 0,13 QM/8040/32
21 22 15° 0,33 QM/8050/32
25 26 15° 0,67 QM/8080/32
37
43
35 36 15° 1,35 QM/8125/32
40 41 16° 3 QM/8160/32
49 45 46 17° 6,4 QM/8250/32
60 57,5 59 12° 8,7 QM/8320/32
Wide hinge SW
Conforms to ISO 15552, type AB7
63
80
100
125
ø
32
40
50
160
200
250
320
EM GL
35
35
40
50
16
20
20
30
12
16
ø CX H7 EX
10 14
16
21
21
25
25
37
43
43
49
60
32
36
41
50
DL
22
25
27
55
60
70
80
23
28
30
40
18
21
MS
16
44
48
50
58
Rear eye R
Conforms to ISO 15552, type MP4
22
24
27
36
16
19
R1
13
41
42
47
52
BR
15°
14°
14°
17°
Z
13°
13°
15°
16°
16°
16°
14°
EW
FL
L
ø EB
4,6
7,3
16,5
26
0,55
0,90
1,50
2,70
(kg)
0,15
0,25
0,40
Model (UR)
QA/8032/33
QA/8040/33
QA/8050/33
QA/8063/33
QA/8080/33
QA/8100/33
QM/8125/33
QM/8160/33
QM/8200/33
QM/8250/33
QM/8320/33
ø HB
TE
UL
RA
UR
63
80
100
125
ø
32
40
50
160
200
250
320
63
80
100
125
ø
32
40
50
160
200
250
320
14
18
22
26
11
14
9
11
ø HB L2
6,6 1,6
6,6
9
1,6
1,6
1,6
2,5
2,5
3,2
4
4
4
4
15
15
18
22
BR
10
11
13
31
31
39
44
11
14
15
20
9
11
BT
7
25
30
35
40
35
40
50
60
RA
18
22
30
88
90
110
122
52
66
76
94
TE
38
41
50
118
122
150
170
50
63
71
90
PH
32
36
45
115
135
165
200 en 1.5.220.018
ø CKH9 ø EB
10 12
12
12
16
16
20
25
30
30
40
45
UL
50
53
65
67
84
94
124
156
162
200
234
12
15
15
18
18
20
UR
31
35
45
50
60
70
90
20
26
40
48
126
130
160
186
6,3
8
13,4
22
0,18
0,28
0,42
2,70
(kg)
0,05
0,07
0,14
89
89
109
119
39,6
49,6
59,6
69
EM
25,6
27,6
31,6
GL
21
24
33
37
47
55
70
97
105
128
150
Model (SW)
M/P19493
M/P19494
M/P19495
M/P19496
M/P19497
M/P19498
M/P19499
M/P19679
M/P19683
M/P19446
M/P19447
ø
32
40
50
63
80
100
125
160
200
16
16
12
12
ø CDH9 EW
10 25,6
20
25
30
30
27,6
31,6
39,6
49,6
59,6
69,6
89,6
89,6
FL
22
25
27
32
36
41
50
55
60
22
22
27
33
16
17
L
13
35,5
37
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH
15
15
20
25
12
12
MR
9
30
30
MR
0,24
0,37
0,59
3,20
(kg)
0,09
0,11
0,17
6,1
6,8
Model (R)
QA/8032/27
QA/8040/27
QA/8050/27
QA/8063/27
QA/8080/27
QA/8100/27
QM/8125/27
QM/8160/27
QM/8200/27
08/20
Narrow hinge SS Dimensions in mm
Projection/First angle
EM
BR
GL
ø EB
ø
32
40
50
63
80
100
125
160
200
15
15
11
13
BR
10
31
31
19
22
12
14
BT
8
10
12
15
20
25
30
20
30
35
35
12
16
ø CK G7
10
16
20
Swivel hinge US
Conforms to VDMA 24562 part 2
18
20
20
26
15
18
11
15
ø EB
11
ø HB
TE
UL
12
16
EM
10
16
20
20
30
35
35
EN
-0,1
EU
GL
21
24
33
37
47
55
70
97
105
Z
Z
ø D3
14
18
11
14
9
11
ø HB
6,6
6,6
9
L2
1,6
1,6
1,6
1,6
2,5
4
4
2,5
3,2
ER
RA
UR
G 1
PH
32
36
45
50
63
71
90
115
135
RA
18
22
30
35
40
50
60
88
90
TE
38
41
50
52
66
76
94
118
122
UL
51
54
65
67
86
96
124
156
162
UR
31
35
45
50
60
70
90
126
130
Groove key M/P72816
Weight: 0,01 (kg)
1,20
2,50
6,00
7,60
(kg)
0,15
0,20
0,48
0,50
0,75
15
M 4
X
4
Model (SS)
M/P19931
M/P19932
M/P19933
M/P19934
M/P19935
M/P19936
M/P19937
M/P19938
M/P19939
ø
32
40
50
63
80
100
125
160
200
90
115
135
45
50
63
71
CH
32
36
30
35
35
16
16
20
20
ø CN H7
10
12
20
20
26
18
18
15
15
ø D3
11
11
37
43
43
21
21
25
25
EN -0,1 ER
14
16
16
18
21
23
28
30
40
44
47
ø S5
K 1
K 2
25
28
28
18
18
15
15
EU
10,5
12
33
37
47
55
G1
21
24
70
97
105
G 2
G 3
30
35
40
50
G2
18
22
60
88
90
45
50
60
70
G3
31
35
90
126
130
14
15
12
12
H6
10
10
20
25
30
50
52
66
76
K1
38
41
94
118
122
65
67
86
96
K2
51
54
124
156
162
1,6
1,6
2,5
2,5
L5
1,6
1,6
3,2
4
4
11
11
9
9
S5
6,6
6,6
14
14
18
15°
15°
14°
14°
Z
13°
13°
17°
16°
16°
(kg)
0,19
0,24
0,46
0,59
1,03
1,40
3,10
6,40
9,10
Model (US)
M/P40310
M/P40311
M/P40312
M/P40313
M/P40314
M/P40315
M/P71355
M/P71356
M/P71357
Groove cover M/P72725/1000
X
08/20
X
6,8
0,8
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH en 1.5.220.019
QA/8000/51 – Guide blocks (plain bearings)
1
AD
AK + #
AJ
AO
AG
AV
AW
Dimensions in mm
Projection/First angle
AE
F
AF
1 AC
F
AG
AW AN
# Stroke
1 Adjustment range
ø 32 & 40 = +2
ø 50 & 63 = +4
ø 80 & 100 = +6
BA
BB
ø
32
40
50
63
80
100
AC
69
74
91,5
92
106
111
15
15
15
12
15
AD
12 15
15
22
22
27
27
AE
17
19
24
24
30
30
AF AG
M 6
M 6
M 8
M 8
M 10
M 10
12
15
17
AH
10
10
12
AJ
32,5
38
46,5
56,5
50
70
AK
110
122
135
153
180
199
ø
32
40
50
63
80
AR
90
100
120
125
155
AS
74
80
96
104
130
AT
78
84
100
105
130
AV
45
50
60
70
90
AW
32,5
38
46,5
56,5
72
9
11
ø AX
6,6
6,6
9
AZ
48
56
66
76
98
BA
76
85
99
114
134,5
11
19
BB
9
15
25
100 175 150 150 110 89 11 118 153,5 28,5
* Insert standard stroke length: 50, 100, 160, 200, 250, 320, 400 and 500 mm, use nearest standard stroke.
Note: Supplied complete with mounting screws for cylinders
Maximum load
F (N)
AL
58
64
80
95
130
150
1000
500
12
16
16
12
12
ø AM
10
7
9
9
6
6
AN
6
15
14
19
11
19
AO
9
132
165
185
AP
100
106
125
2,2
4,1
5,8
(kg) at 0 mm (kg) per 100 mm Model
1,0 0,06 QA/8032/51/*
1,2
1,8
0,09
0,09
QA/8040/51/*
QA/8050/51/*
0,09
0,16
0,16
QA/8063/51/*
QA/8080/51/*
QA/8100/51/* en 1.5.220.020
100
50
ø 32
10
10 50 100 500 (mm)
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH 08/20
QA/8000/61 – Guide blocks (roller bearings)
1
1
CE
CG
CB
CA + #
CC
CD
CF ±0,2
CH ø DH H7 5 CK CY DD 5
Dimensions in mm
Projection/First angle
CJ 6
CT
ø DJ
2
1 CI
ø DH H7
CN
ø DK f6
CH
CZ
CX ±0,2
DL
3
# Stroke
1 Adjustment range
ø 32 + 40 = +5
ø 50 ... 100 = +10
2
3
4
Safety zone 28 min
Centering sleeve
Blanking plug (remove when using locking catridges)
5
6
2,5 deep
Locking cartridge on request
4
ø
32
40
50
63
80
100
CA
177
192
237
237
280
280
CB
100
111
128
128
151
156
CC
65
69
65
97
112
112
CD
28
33
40
40
50
55
CE
12
12
15
15
20
20
CF ±0,2 CG
15,3 6,5
23
33,8
29,3
37
40,5
6,5
9
9
11
11
CH
M 6
M 6
M 8
M 8
M 10
M 10
CI
84,5
88
94
98,5
114
115,5
13
15
22
22
27
27
CJ
ø
32
40
50
63
80
100
CP
90
110
130
145
180
200
119
148
172
CR
74
87
104
CS
50,5
58,5
70,5
85,5
105,5
130,5
17
19
24
24
30
30
CT
20
25
25
øCV F7
12
16
20
CW
61
69
85
100
130
150
CX ±0,2
32,5
38
46,5
56,5
72
89
5
6
6
6
8
8
CY CZ
125
140
150
182
215
220
DA -0,3
50
58
70
85
105
130
ø DE ±0,2 DF ø DG ø DH H7 DJ ø DK f6 DL DM
32
40
50
63
80
100
78
84
100
105
130
150
M 6
M 6
M 8
M 8
M 10
M 10
20
24
30
30
48
48
9
9
11
11
13
13
M 5
G1/8
G1/8
G1/8
G1/8
G1/8
9
9
11
11
13
13
45
61,5
76,5
76,5
119
119
14
14
16
16
20
20
* Insert standard stroke length: 50, 100, 160, 200, 250, 320, 400 and 500 mm, use nearest standard stroke.
Note: Supplied complete with mounting screws for cylinders
*1) Locking cartridges should be ordered separately. Passive - pressure to unlock. Two required per guide block.
(kg) at 0 mm
1,2
2,2
3,6
4,6
8,7
11
(kg) per
100 mm
0,18
0,32
0,49
0,49
0,77
0,77
Locking force (N)
600
1000
1500
1500
3000
3000
6
7
7
6
6
CK
5
DB ±0,3 DC
45 6,6
54
63
6,6
9
80
100
120
9
11
11
80
92
93
CN
61
67
75,5
Cartridge
*1)
Model
QA/8032/63 QA/8032/61/*
QA/8040/63 QA/8040/61/*
QA/8050/63 QA/8050/61/*
QA/8050/63 QA/8063/61/*
QA/8080/63 QA/8080/61/*
QA/8080/63 QA/8100/61/*
15
18
18
11
15
ø DD
11
152
189
213
CO -0,3
97
115
137
08/20
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH en 1.5.220.021
Maximum load for
QA/8000/61
1 1
Dimensions in mm
Projection/First angle
2 2
1
2
Centre of gravity load capacity
Outstroke
Maximum load capacity is dependent on the outstroke of a horizontally installed guide unit. In the case of short stroke operation, the load capacity figures taken from the diagram must be multiplied by the correction factor (diagram 2). In the curves of load capacity (diagram
1), the short stroke corrections have already been taken into account for an outstroke > 60 mm.
The total deflection of guide rods will be determined by the addition of that due to own weight (diagram 3) and that due to load capacity
(diagram 4).
Maximum load capacity depending on outroke
(diagram 1) (diagram 2)
Load capacity Correction factor
( N )
Deflection caused by own weight
(diagram 3)
Deflection
(mm) f
Deflection caused by a load of 10 N (diagram 4)
Deflection
(mm) f
500 1,0 2,5 2,5
ø 32
400 0,9 2,0 2,0
300 0,8 1,5
ø 32
1,5
200
100
ø 80 – 100
ø 50 – 63
ø 40
ø 32
0
0 100 200 300 400 500 600 (mm)
Outstroke
0,7
0,6
0,5
0 20 40 60 (mm)
Stroke
1,0
0,5
0
ø 40
ø 50 – 63
ø 80 – 100
0 100 200 300 400 500 600 (mm)
Outstroke
In the case of shock load applications, the figures given in hte diagrams above must be reduced by a factor of 2.
1,0
ø 40
0,5
ø 50 – 63
ø 80 – 100
0
0 100 200 300 400 500 600 (mm)
Outstroke en 1.5.220.022
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH 08/20
QA/8000/81 – Guide blocks (long coupling)
QA/8000/85 – Guide blocks (short coupling)
1
1
CE
CG
CB
CA + #
CD
CF ±0,2
CH
CC
CK
CJ
CY
DD Dimensions in mm
Projection/First angle
CT
1
1
CL
CI
CH
CZ
CX ±0,2
# Stroke
1 Adjustment range
ø 32 + 40 = +5
ø 50 ... 100 = +10
ø
32
40
50
63
80
100
CA /81
174
189
210
235
265
288
CA /85
149
164
181
210
240
265
114
139
145
CB + /81 CB + /85 CC
89 64 75
99
113
74
88
80
78
89
114
120
106
111
128
34
50
55
CD
24
28
34
15
20
20
12
15
CE
12
CF ±0,2 CG
4,3 6,5
11
18, 8
6,5
8,5
15,3
25
30
9
11
11
ø
32
40
50
63
80
100
6
7
7
6
6
CK
5
27
35
35
CL /81
27
27
28
2
10
10
2
3
CL /85
2
152
189
213
CO ±0,2 CP
97 93
115
137
112
134
147
180
206
119
148
173
CR
74
87
104
51
58,2
CS
70,2
85,2
105,5
130,5
24
30
30
CT
17
19
24
20
25
25
øCV f8
12
16
20
ø DA ±0,2 DB ±0,3 ø DC ø DD DE ±0,2 DF DM (kg) /81 at 0 mm
(kg) /85 at 0 mm
32
40
50
63
49
58
70
85
45
55
65
80
9
9
6,6
6,6
15
15
11
11
78
84
100
105
M 6
M 6
M 8
M 8
16
16
12
12
1,2
2,2
3,6
4,6
1,15
2,15
3,55
4,55
80
100
105
130
100
120
11
11
18
18
130
150
M 10
M 10
20
20
8,7
11
8,65
10,95
* Insert standard stroke length: 50, 100, 160, 200, 250, 320, 400 and 500 mm, use nearest standard stroke.
Note: Supplied complete with mounting screws for cylinders
CW
61
69
85
100
130
150
CH
M 6
M 6
M 8
M 8
M 10
M 10
CI /81
84,7
88
94,2
98,7
114
115
CX ±0,2 CY
32,5 5
38
46,5
6
6
56,5
72
89
6
8
8
(kg) /81; /85 per 100 mm
0,18
0,32
0,49
0,49
0,77
0,77
Model
/81
QA/8032/81
QA/8040/81
QA/8050/81
QA/8063/81
QA/8080/81
QA/8100/81
CI /85
59,7
63
69,2
73,7
89
90
15
15
20
20
26
26
CJ
178
195
218
CZ
125
140
148
Model
/85
QA/8032/85
QA/8040/85
QA/8050/85
QA/8063/85
QA/8080/85
QA/8100/85
08/20
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH en 1.5.220.023
Maximum load for QA/8000/81 and /85
2
F 1(N)
2
1
Dimensions in mm
Projection/First angle
2
1
2
Centre of gravity load capacity
Outstroke
F (N)
F1 = F x 0,9
Static force: F2 = F x 2
Max. load capacity (diagram 1) is dependent on the outstroke of a horizontally installed guide unit.
Maximum load capacity depending on outroke
Deflection caused by a load of 10 N
(diagram 1)
Load capacity
( N )
1,0
400
1000
0,9
0,8
400
100
200
ø 50
ø 63
ø 50 – 63
ø 40
ø 32
0 0
50
0 100 200
ø 40
ø 32
Outstroke
0,7
0,6
0,5
0
500 (mm)
The total deflection of guide rods will be determined by the addition of the amount of deflection caused by own weight (according to diagram 2) plus the amount of deflection due to load capacity (according to diagram 3).
Deflection caused by own weight
(diagram 2)
Deflection (mm)
Deflection caused by a load of 10 N
(diagram 3)
Deflection (mm) f f
2,5 2,5
ø 32
2,0 2,0
ø 32
1,5 1,5
1,0
0,5
0
0 100 200 300 400 500 600 (mm)
Outstroke
ø 40
ø 50 – 63
ø 80 – 100
1,0
ø 40
0,5
ø 50 – 63
ø 80 – 100
0
0 100 200 300 400 500 600 (mm)
Outstroke
In the case of shock load applications, the figures given in hte diagrams above must be reduced by a factor of 2 en 1.5.220.024
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH 08/20
> Magnetically operating reed switch - Round style
> Suitable for all cylinder ranges with magnetic piston
> Switches can be mounted flush with the delivered special adaptor
> LED indicator on LSU models
Technical features
Operation:
M/50/LSU Normally open with LED (yellow)
Switching voltage (Ub):
10 ... 240 V a.c./170 V d.c.
Switching voltage output:
Ub - 2,7 V
Switching current
(see graph overleaf):
0,18 A max.
Switching power:
10 W/10 VA max.
> Alternative variants allows a wide range of application
Contact resistance:
150 mΩ
Response time:
1,8 ms
Operating temperature:
-25 ... +80°C (-13 ... +176°F)
High temperature version:
+150°C max.(+302 °F)
Protection rating (EN 60529):
IP66
Shock resistance:
50 g (during 11 ms)
Vibration resistance:
35 g (at 2000 Hz)
Cable type:
2 x 0,25: PVC, PUR or silikone
3 x 0,25 PVC
Cable length:
2, 5 or 10 m
Electromagnetic compatibility according to:
EN 60947-5-2
Materials:
Body: plastic
Cable: see table below
Technical data - Reed switches - additional information see data sheet en 4.3.005
Symbol
~+ BN
Voltage
(V a.c.) (V d.c.)
Current maximum
(mA)
10 ... 240 10 ... 170 180
10 ... 240 10 ... 170 180
Function Operating temperature
(°C)
Normally open -25 ... +80
Normally open -25 ... +80
~ BU
10 ... 240 10 ... 170 180 Normally open -25 ... +150
BN
BU
—
•
•
LED Protection class
IP 66
IP 66
—
—
Plug Cable length
(m)
2, 5 or 10
5
IP 66 — 2
BK
BU
BN
10 ... 240 10 ... 170 180 Changeover -25 ... +80
1
BN
10 ... 60 10 ... 60 180
10 ... 60 10 ... 60 180
4
* Insert cable length; *1) Plug-in connector see page 12
Normally open -25 ... +80
Normally open -25 ... +80 •
•
— IP 66
IP 66
IP 66
— 5
M8 x 1 0,3
M12 x 1 0,3
Cable type
PVC 2 x 0,25
PUR 2 x 0,25
Weight Model
(g)
37
37
M/50/LSU/*V
M/50/LSU/5U
Silicon 2 x 0,25 37
PVC 3 x 0,25 37
PVC 3 x 0,25
PVC 3 x 0,25
16
16
TM/50/RAU/2S
M/50/RAC/5V
M/50/LSU/CP *1)
M/50/LSU/CC *1)
08/20
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH en 1.5.220.025
Dimensions
M/50/LSU/*V, M/50/LSU/5U,
TM/50/RAU/2S
Cable length L = 2, 5 or 10 m
Dimensions in mm
Projection/First angle
A-B
5,1 1 30
A
L +30
50 +10
1,5
B
2
M/50/RAC/5V
Cable length L = 5 m
A-B
5,1 1 30
A
L +30 50 +10
1,5
B
3
M/50/LSU/CP
M/50/LSU/CC
A-B
5,1 1
1,5
30
Accessories
Plug-in connector cable with nut
Outer cover Cable length (m) Weight (kg) Connector
PVC 3 x 0,25 5 0,18 M8 x 1
PUR 3 x 0,25
PUR 3 x 0,34
5
5
0,18
0,21
M8 x 1
M12 x 1
Connector
M/P73001/5
M/P73002/5
M/P34594/5
300
±15
X
A
31,5 ... 36 4 BK
X
1 BN
B
4
1 Fixing screw
2 + BN = brown; - BU = blue (output)
3 - BK = black; + BN = brown; - ≠BU = blue
4 Version CP: Plug M8 x 1, color code: BK = +; BN = -; BU = output
Version CC: Plug M12 x 1, color code: BK = +; BN = -; BU = output
3 BU en 1.5.220.026
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH 08/20
> Magnetically operated solid state switch - round style
> IO-Link version available
> Suitable for all cylinder ranges with magnetic piston
> Switches can be mounted flush in all profile cylinders
> Reliable switching with a very fast reponse time
> Particularly suited for use in high levels of vibration
> LED indicator as standard
> CE certified
> UL listed
Technical features
Operation:
M/50/EAP (PNP) open collector output with LED (yellow)
M/50/EAN (NPN) grounded emitter output with LED (yellow)
M/50/IOP (PNP) Easy IO-Link open collector output with LED
(yellow)
Switching voltage (Ub):
10 ... 30 V d.c.
Switching voltage output:
Ub - 2 V
Inducted voltage:
0,5 V
Switching current
(see graph overleaf):
100 mA max.
Switching power:
3,0 W max.
Response time:
< 0,5 ms for EAP switch
< = 1 ms for IOP switch
Operating frequency:
1 kHz
Protection rating (EN 60529):
IP67 (standard)
IP68 for type: M/50/EAP/5U
Operating temperature:
-40 ... +80°C (-40 ... 176°F)
(IP67 & IP68)
Cable type:
PVC 3 x 0,12 (standard)
PUR 3 x 0,14 (M/50/EAP/5U)
Cable length:
2, 5 and 10 m
Electromagnetic compatibility according to: EN 60947-5-2
Materials:
Body: plastic
Cable: see table below
Technical data - Solid state
Symbol pnp pnp npn
1
3
4
A
+ BN
BU
BK
A
+ BN
BU
BK
+
BU
BN
A
BK
Voltage
(V d.c.)
Current maximum
(mA)
10 ... 30 100
10 ... 30 100
10 ... 30 100
10 ... 30 100
10 ... 30 100
10 ... 30 100
10 ... 30 100
10 ... 30 100 npn
3
1
4
A
+ BU
BN
BK
PNP
PNP
PNP
PNP
PNP
PNP
NPN
Function IO-Link
*2)
•
•
Operating temperature
(°C)
-40 ... +80
-40 ... +80
-40 ... +80
-40 ... +80
-40 ... +80
-40 ... +80
-40 ... +80
•
•
•
•
•
•
•
LED Protection class
IP67
IP67
IP68
IP67
IP67
IP67
IP67
Plug Cable length
(m)
—
—
—
M8 x 1
2, 5 or 10
5
5
0,3
M8 x 1 0,3
M12 x 1 0,3
— 2, 5 or 10
NPN -40 ... +80 • IP67 M8 x 1 0,3
Cable type
Weight
(g)
PVC 3 x 0,12 37
PVC 3 x 0,12 37
PUR 3 x 0,14 37
PVC 3 x 0,14 16
PVC 3 x 0,14 16
PVC 3 x 0,14 16
PVC 3 x 0,12 37
Model
M/50/EAP/*V
M/50/IOP/5V
M/50/EAP/5U
M/50/EAP/CP *1)
M/50/IOP/CP *1)
M/50/EAP/CC *1)
M/50/EAN/*V
PVC 3 x 0,14 16
* Insert cable length; *1) Plug-in connector below; Color code: BK = black, BN = brown, BU = blue
IO-Link function *2)
· Visual installation aid
· Counter
· Temperature diagnostic
· Power LED
Switching current and switching voltage
100 mA
3,0 W
M/50/EAN/CP *1)
08/20
0
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH
30
V DC en 1.5.220.027
Dimensions
M/50/EAP/*V,
M/50/EAN/*V
M/50/IOP/5V
Cable length L = 2, 5 or 10 m
M/50/EAP/CP,
M/50/EAN/CP
M/50/IOP/CP
A-B
5,1 1
1,5
30
A-B
5,1 1 30
1,5
Dimensions in mm
Projection/First angle
A
L +30
B
A
300
±15
2
31,5 ... 36
B
3
42
±4
X
1 BN
X
4 BK
3 BU
M/50/EAP/CC A-B
5,1 1
1,5
30
A
300 ±15
47,5 4 BK
X
4
1 Fixing screw
2 Color code: BK = black; BN = brown; BU = blue
3
4
Plug M8 x 1
Plug M12 x 1
1 BN
X
3 BU
Accessories
Plug-in connector cable with nut
Outer cover Cable length (m) Weight (kg) Connector
PVC 3 x 0,25 5 0,18 M8 x 1
PUR 3 x 0,25
PVC 3 x 0,25
5
5
0,18
0,18
M8 x 1
M8 x 1
PUR 3 x 0,25 5
PUR 3 x 0,34 5
*1) Straight connector
*2) 90° Connector
0,18
0,21
M8 x 1
M12 x 1
Connector
M/P73001/5*1)
M/P73002/5*1)
M/P34615/5*2)
M/34596/5*2)
M/P34594/5*1)
QM/27/2/1 – Switch mounting brackets for Round barrel
Switch: M/50
ø A B L Weight
(kg)
Model ø
32
40
50
63
80
7
7
9
9
4
5
6
6
7
4
12 0,010
12 0,010
12 0,010
12 0,010
12 0,010
QM/27/2/1
QM/27/2/1
QM/27/2/1
QM/27/2/1
QM/27/2/1
100
125
160
200
250
320
L
A B L Weight
(kg)
3 2
-2 -2
12 0,010
12 0,010
-10 -9 12 0,010
-17 -16 12 0,010
-10 -6 35 0,085
-20 -16 35 0,072
Model
QM/27/2/1
QM/27/2/1
QM/27/2/1
QM/27/2/1
QM/27/2/2
QM/27/2/3 en 1.5.220.028
B
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH 08/20
> Magnetically operating
Reed switch & Solid state - Block style
> Suitable for all Rond barrel cylinder with magnetic piston
> Alternative materials allows a wide range of application
> Switch with plug
Technical features
Operation:
TQM/31, QM/32 normally open with LED (yellow)
Switching voltage (Ub):
10 ... 240 V a.c./d.c.
Switching voltage output:
Ub - 2 V (QM/32)
Switching current (see graph overleaf):
1 A max. (QM/32)
Switching power:
50 W/50 VA max.
Contact resistance:
100 mΩ
Response time:
3 ms
Operating temperature:
-20 ... +80°C (-4 ... +176°F)
High temperature version:
+150°C max. (TQM/31) (+302°F)
Protection rating (EN 60529):
IP 66
Shock resistance:
50 g (during 11 ms)
Vibration resistance:
35 g (50 to 2000 Hz)
Cable type:
PVC 2 x 0,75, PUR 2 x 0,75
VMQ 2 x 0,75 (TQM/31)
Cable length:
2, 5 or 10 m
Electromagnetic compatibility according to:
EN 60947-5-2
Materials:
Body: plastic
Cable: see table below
Technical data - Reed switches - additional information see data sheet en 4.3.021
Symbol
~+ BN
Voltage
(V a.c./V d.c.)
10 ... 240
10 ... 240 1
1
Current maximum
(A)
Function Temperature
(°C)
Normally open -20 ... +80
Normally open -20 ... +80 •
•
LED Protection class
IP 66
IP 66
Features
—
—
Cable length
(m)
2, 5 or 10
2
~ BU
10 ... 240 2 Normally open -20 ... +150 — IP 66 High temperature
2, 5 or 10
BN
BU
1
BN
10 ... 240 1 Normally open -20 ... +80 • IP 66 Plug M12 x 1 —
4
—
Cable type
PVC 2 x 0,75
PUR 2 x 0,75
Weight Model
(g)
108 (2 m) QM/32/*
108 QM/32/2/PU
Silicon 2 x 0,75 102 (2 m) TQM/31/*
15 QM/32/P *1)
Technical data - Solid state - additional information see data sheet en 4.3.025
Symbol pnp A
+ BN
BU
BK
Voltage
(V d.c.)
10 ... 30
10 ... 30
Current maximum
(mA)
200
200
Function Temperature
PNP
PNP
(°C)
-20 ... +80
-20 ... +80 •
•
LED Protection class
IP 66
IP 66
Features
—
—
Cable length
(m)
2, 5 or 10
5
Cable type
PVC 3 x 0,5
PUR 3 x 0,34
10 ... 30 200 PNP -20 ... +80 • IP 66 Plug M12 x 1 pnp
1
3
4
A
+ BN
BU
BK
* Insert cable length
*1) Plug-in connector see page below; Color code: BK = black, BN = brown, BU = blue
Weight Model
(g)
102 (2 m) QM/132/*
QM/132/5/PU
15 QM/132/P *1)
08/20
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH en 1.5.220.029
Dimensions
TQM/31, QM/32, QM/132
X
1
15
35
27
X
3
30
QM/32/P,
QM/132/P
Accessories
Plug-in connector cable with nut
Outer cover Cable length (m) Weight (kg) Connector
PVC 3 x 0,34 5 0,21 M12 x 1
PUR 3 x 0,34 5 0,21 M12 x 1
Connector
M/P34692/5
M/P34594/5
QM/31/000/22 – Switch mounting brackets for Round barrel
Switches: TQM/31, QM/32, QM/132
Cy.
ø
80
100
125
160
32
40
50
63
200
250
320
A B Weight
(kg)
5 42
4,5 46
0,026
0,026
4,5 50,5 0,026
4 56,5 0,026
0
0
2 62,5 0,028
1,5 70,5 0,028
81
91,5
0,028
0,023
-4 106 0,023
-3 138 0,041
-21 154 0,080
Model
QM/31/032/22
QM/31/032/22
QM/31/032/22
QM/31/032/22
QM/31/080/22
QM/31/080/22
QM/31/080/22
QM/31/160/22
QM/31/160/22
QM/31/250/22
QM/31/320/22
L 1
1 LED (yellow)
2 Plug M12 x1
Color code
BK = black
BN = brown
BU = blue
X
1
15
A
3,5
1
1 BN
4 BK
3 BU
35
27
Dimensions in mm
Projection/First angle
2
M12 x 1
A
8
32 en 1.5.220.030
2
1
2
Bracket
Switch
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH
B
08/20
> Pneumatic proximity sensor
> Port size: ø 3 mm
> Pneumatic proximity sensor
> Optical pressure indicator signals position
> Non-contact sensing with pneumatic output
> Intrinsically safe – no problem in explosion areas
12 2 10
Technical features
Medium:
Compressed air, filtered and non-lubricated
Operation:
Pneumatic proximity switch for non-contact sensing via a magnetic field
Operating pressure:
2 ... 6 bar (29 ... 87 psi)
Connections:
Pipes for 3 mm l/D tubing
Operating temperature:
-15 ... +60°C (+5 ... +140°F)
Humidity and water content:
Air supply must be dry.
Corresponding of the application and working conditions the air must be dry enough to avoid condensate. The pressure dewpoint must be minimum
15°C under the application and working conditions.
Materials
Body: Plastic
Pipe connectors: Brass
Holding strap: CU ZU 37 (brass)
Pneumatic proximity sensor - additional information see data sheet N/en 4.3.061
Symbol
2
Operating pressure
(bar)
2 ... 6
Flow rate
(l/min)
40
Orifice size
(mm)
2 •
Optical indicator Connections Model
Pipes for 3 mm l/D tubing QM/140
1 3
Vibration resistance:
10 ... 50 Hz (to IEC 68 T. 2-27)
Shock resistance:
500 m/s2 over a period of
5 ms (to IEC 68 T. 2-27)
Flow rate:
40 l/min
Orifice size:
2 mm
Repeatability:
± 0,2 mm
Can be used with cylinder:
ø 10 ... 100 mm
Dimensions
4
34
M 4
6,5
1
2
3
4
9
14,5
18
1
2
3
4
Compressed air port 1
Output port 2
Exhaust port
Optical indicator
15
17
15
08/20
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH en 1.5.220.031
QM/140/010/22 – Bracket with holding strap
Pneumatic switch: QM/140
ø
32
40
50
63
80
100
Valve mounting kit for Profile barrel
A
22
23
22
24
23
24,5
(kg)
0,020
0,020
0,020
0,020
0,020
0,020
Dimensions in mm
Projection/First angle
K
C F
ø
50/63
80/100
125
A
60
90
135
B
37
37
37
7
7
C
7
D
4,5
4,5
4,5
E
46
76
121
F
8,5
8,5
8,5
G
5,5
6,5
6,5
H
43
70
115
12
12
J
12
D
B
K
M4
M4
M4
G
3
3
3
SW (kg)
0,08
0,11
0,16
Model
PQA/802050/22/54
PQA/802080/22/54
PQA/802125/22/54 en 1.5.220.032
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH 08/20
Valve mounting kit for Round barrel
B2
B1
L2
G
L1
3
30
SW 3
SW 2
Dimensions in mm
Projection/First angle
125
160
160
160
100
100
125
125
80
80
80
100
ø
63
63
63
200
200
200
194
194
194
120
156
156
156
97
97
120
120
78
78
78
97
B1
61,5
61,5
61,5
136
175
175
175
113
113
136
136
231
231
231
94
94
94
113
B2
77,5
77,5
77,5
119
119
119
68
68
80
80
80
101,5
101,5
101,5
59,5
59,5
59,5
68
H
50
50
50
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
L1
17
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
L2
4,5
4,5
4,5
M6
M4
M5
M6
M5
M6
M4
M5
M4
M5
M6
M4
M5
M6
M4
G
M4
M5
M6
0,21
0,28
0,28
0,28
0,19
0,19
0,21
0,21
0,14
0,14
0,14
0,19 kg
0,13
0,13
0,13
0,31
0,31
0,31
Model
QA/8063/22/55/4
QA/8063/22/55/5
QA/8063/22/55/6
QA/8080/22/55/4
QA/8080/22/55/5
QA/8080/22/55/6
QA/8100/22/55/4
QA/8100/22/55/5
QA/8100/22/55/6
QA/8125/22/55/4
QA/8125/22/55/5
QA/8125/22/55/6
QA/8160/22/55/4
QA/8160/22/55/5
QA/8160/22/55/6
QA/8200/22/55/4
QA/8200/22/55/5
QA/8200/22/55/6
08/20
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH en 1.5.220.033
Recommended Valves
Recommended Valve Range
Inline Valve V60 ISO Valve 3/2 Poppet valve
Cylinder
ø
80
100
125
160
32
40
50
63
200
250
320
Port size
G1/8
G1/4
G1/4
G3/8
G3/8
G1/2
G1/2
G3/4
G3/4
G1
G1
Tubing
ø
6/4
6/4
6/4
8/6
10/7
10/7
12/8,5
16/12
16/12
22/17
26/18
Valve
Flow
(l/min)
250
250
250
750
1250
1250
2500
4250
4250
6000
10000
Valve port size
1/4"
1/4"
3/8"
1/2"
1/8"
1/8"
1/8"
1/8"
1/2"
3/4"
1"
V61
V61
V62
V63
V63
V60
V60
V60
V60
ISO Star
ISO Star
ISO Star
ISO Star
ISO Star
UM/22000
UM/22000
UM/22000
UM/22000
UM/22000
UM/22000
UM/22000 80265
Customer Solution Cylinder valve unit
For additional information please contact the technical service
EN - Englisch
Warning
These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under » Technical features/ data «.
Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult
Norgren GmbH.
Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes.
The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure.
System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided.
System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. en 1.5.220.034
Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159j) © 2020 Norgren GmbH 08/20
advertisement