KA/802000/M

Stainless Steel ISOLine™ 15552 cylinder, double acting

> ø 32 ... 200 mm

> High performance adaptive cushioning system “ACS”

> High temperature version up to +150 °C

> High corrosion and acid resistance

> Ideal for applications in the food industry

Technical features

Medium:

Compressed air, filtered, lubricated or non-lubricated

Standard:

ISO 15552

Operation:

Double acting, adjustable cushioning

Operating pressure:

ø 32 ... 200 mm

Cylinder with Round barrel

1 ... 16 bar (14 ... 232 psi)

Ports:

G1/8 ... 3/4

Cylinder diameters:

32, 40, 50, 63, 80, 100, 125,

160, 200 mm

Standard strokes:

25, 50, 80, 100, 125, 160, 200,

250, 320, 400, 500 mm

Non-standard strokes:

Available (5 ... 2500 mm)

Operating temperature:

ø 32 ... 200 mm

“Standard version”

-10 ... +80 °C max. (+14 ... +176

°F)

ø 32 ... 200 mm

“High temperature version” (T)

0 ... +150 °C max.

(-17,7 ... +302 °F)

Air supply must be dry enough to avoid ice formation at temperatures below +2 °C (+35

°F).

Technical data

Cylinder ø (mm)

Port size

Piston rod ø (mm)

Piston rod thread 

Cushion length (mm)

Cushioning

Adaptive cushioning systems “ACS”

Cushioning (adjustable cushion)

Initial cushion volume (cm3)

Theoretical thrusts at 6 bar outstroke (N)

Theoretical thrusts at 6 bar instroke (N)

Air consumption at 6 bar outstroke (l/cm)

Air consumption at 6 bar instroke (l/cm)

12,8

482

414

0,056

0,048

32

G1/8

12

M10 x 1,25

20

•

40

G1/4

16

M12 x 1,25

22

•

50

G1/4

20

M16 x 1,5

24

•

20,2

754

633

0,088

0,074

36

1178

990

0,137

0,114

64

1870

1680

0,218

0,195

63

G3/8

20

M16 x 1,5

24

•

111

3016

2722

0,35

0,32

80

G3/8

25

M20 x 1,5

26

•

235

4710

4416

0,55

0,51

100

G1/2

25

M20 x 1,5

33

•

427

7363

6882

0,86

0,79

125

G1/2

32

M27 x 2

39

•

Standard Materials:

Barrel: X5 Cr Ni 18 10

(1.4301; AISI 304)

End covers: X5 Cr Ni 19 10

(1.4308; AISI 304)

Piston rod: X10 Cr Ni S 18 9

(1.4305; AISI 303)

Nuts and screws: X10 Cr Ni S

18 9

(1.4305; AISI 303)

Tie rods: X5 Cr Ni Mo 17 12 2

(1.4401; AISI 316)

Piston rod seals: FPM

Piston seals:

PUR ø 32 ... 100 mm,

NBR ø 125 ... 200 mm

Cushion seals: NBR

O-rings: FPM

160

G3/4

40

M36 x 2

43

200

G3/4

40

M36 x 2

43

•

784

12064

11310

1,41

1,32

•

1273

18840

18090

2,2

2,1

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2019 - 9249c) © 2020 Norgren GmbH

09/20 en 1.5.222.01

The function

The new “ACS” Adaptive

Cushioning System provides a high performance pneumatic damping function. The system will automatically cushion for a wide range of general applications as delivered. Manual adjustment is still possible for extreme applications.

Only adjust the cushion needle in extreme applications.

Mass

(kg)

Operating area of the “ACS”

Adaptive Cushioning System

Adjustment in this zone not necessary.

Speed

(v)

Design and sizing in pneumatics

Golden Rules

Design and sizing in pneumatics is often based upon experience coupled with an element of fear of under specifying crucial equipment. In an attempt to ensure enough power, engineers may select over sized cylinders and then select over sized valves to supply them with enough air. The same uncertainty can also lead to over sized specification of air line equipment, fittings and tubing.

The outcome is components larger than necessary that use too much compressed air and waste energy and money. However when following some well proven golden rules and a few laws of pneumatics it is easy to achieve correctly sized pneumatic installations.

Basics to Consider

The force required, the pressure available, the speed of movement and air consumption. ISO and VDMA standard or compact style also cushioning and sensors. Cylinders are greased on assembly and operate under normal conditions without additional lubrication.

However using a lubricator will extend the life of these products.

Golden Rule:

The theoretical force of the cylinder should be 25% extra for high speed, 50% extra for low speed and 100% extra for ultra low speed

(positioning) applications. The correct sizing is based upon the required force and applied pressure. Go to page 1 for more information on cylinder sizing and air consumption.

1) 1)

Load and Buckling

For applications with high side loading, use pneumatic slide actators or standard cylinders fitted with guide units. Alternatively external guide bearings should be installed. When a long stroke length is specified, care must be taken to ensure the rod length is within the limits for prevention of buckling. The table shows the maximum stroke length for a variety of installation arrangements.

werden.

werden.

F F

1)

F F

F F F

1)

F F F

2) 2)

F

F F

F

2) F F

F F F 2) F F F 3) 3)

F

F F

F 3) F 4) 4) F F

F 4)

F

4)

F

Zylinder

Ø Ø

Cylinder

ø (mm)

Ø

8 8

10 10

12 12

16 16

20 20

25 25

32 32

40 40

50 50

63 63

80 80

Ø mm

Piston rod

ø (mm)

4

32

40

50

63

80

100

125

160

200

3

4

4

6

6

6

8

8

8

10 10

10 10

12 12

12 12

12 12

16 16

14 14

16 16

16 16

20 20

20 20

20 20

25 25

25 25

12

16

20

20

25

25

32

40

40

25 25

25 25 en 1.5.222.02

32 32

38,1 (1,5)

38,1 (1,5)

4

730

980

1200

1400

2000

1600

40 40

40 40

44,45 (1,75)

50 50

57,15 (2,25)

57,15 (2,25)

63 63

57,15 (2,25)

Load case 1

Pressure (bar)

6

1100

1600

6

860

1200

2000 1600

1500

1900

1200

1500

1500 1200

2000 1600

2400

1900

1900

1500

16

130

370

590

670

930

930

720

500

960

570

730

1200

950

880

670

1100

910

4

Belastung Fall 2

Druck (bar)

500

730

930

6 4 6

500

730

930

Druck (bar)

4 10

80

390

16

60

70

16

60

80

580

740

50

550

720

880

720

880

570

700

420

510

670

910

1100

860

670

910

1100

860

520

710

880

670

380

520

640

480

4

310

380

270

380

Belastung Fall 3

Druck (bar)

4 16

210

6 6 4

650

Druck (bar)

4 10

520

16

80

16

80

10

380

320

420

940

1200

750

960

80 80

560

720

4

480

350

930

1100

880

1200

1400

1100

740

910

690

940

1200

890

550

680

510

690

860

650

Belastung Fall 4

Druck (bar)

4 16

290

430

550

420

510

370

520

640

480

6 6 4

760

1100

1400

1100

1300

1000

1400

1700

1300

Druck (bar)

4 10 6 16

600

90

880

90

1100

16

90

90

10

450

660

840

860

1100

820

1100

650

800

600

820

1400 1000

1000 770

Belastung Fall 4

Druck (bar)

16

340

500

640

490

600

450

620

760

580

09/20

1100

860

1100

1400

800

600

1000

820

1200

950

1000

770

510

660

610

840

840

650

1100

860

960

980

1300

1100

1200

870

620

480

450

870

430

330

540

420

10

120

160

120

320

230

900

720

760

580

600

450

790

620

640

490

810

660

390

500

470

640

720

730

990

790

930

650

480

360

340

680

330

250

410

320

16

90

120

90

240

240

ANWENDUNG:

In der Praxis werden die Ventildurchflusswerte bei unterschiedlichen

Bedingungen gemessen. Um die Angaben der verschiedenen Hersteller vergleichen zu können, finden Sie in der untenstehenden Tabelle die

Wasser und in m

Maßeinheit C in dm 3 3

Wasser und in m 3

Maßeinheit C in dm 3 2

S ist die Nutzfläche in mm 2 S ist die Nutzfläche in mm 2

Cv Cv

Kv Kv

Faktoren

Cv Cv

1 1

C C

M 3 /h 3 /h 0,017 l/min 0,001

A A

S S

Kv Kv

Faktoren

Cv C C

0,869

1

1 4,69

0,213

M 3

0,015 0,017

1

0,053

0,040

Kv

1 Kv

Durchfluss * Öffnungsgröße m 3 /h 3 Cv

59,1 1

C l/min Kv m 3 /h

4,08

985

1132

A (mm 2 ) S (mm 2 ) 2 )

2 )

16,3

18,7

M 3 /h 1 1 0,017

0,243 l/min 0,001

0,189

16,67

1

4,11

0,276

241

1 1

1 1

Öffnungsgröße

SCHMIERMITTEL

2 )

241

21,5

1132 24,7

5,27

18,7

21,5

Die Schmierung durch einen Normalnebelöler oder Mikronebelöler wird in diesem Katalog erklärt. Das empfohlene Öl hängt jedoch sehr von den

16,67 0,364

1 Marken und Sorten ab. Norgren kann aufgrund der Informationen der

45,8

1,31

1 0,761 1

örtlichen Bedingungen sowie von der Verfügbarkeit der verschiedenen

Marken und Sorten ab. Norgren kann aufgrund der Informationen der

Lieferanten in jedem Land verschiedene Produkte empfehlen.

20°C, 1013 mbar und 65% Luftfeuchtigkeit..

* Durchflussparameter sind 6 bar am Einlass und 5 bar am Auslass bei

20°C, 1013 mbar und 65% Luftfeuchtigkeit..

xiii xiii

Additional ISO 15552 Cylinder ranges (Cylinder ranges in the red frame are shown in this data sheet.)

Symbols

• • •

Food & B

•

• • •

•

•

•

•

• • •

•

•

• • • •

•

• • •

• • •

•

•

• • •

•

•

•

•

•

•

ø (mm) Range

32 ... 125

32 ... 125

160 ... 320

RA/8000

LRA/8000

Description

PRA/802000 Double Acting

Cylinder

LPRA/802000

RA/802000

LPRA/802000

Double Acting

Cylinder

Double Acting

Cylinder

Datasheet

1_5_220_PRA_802000_M_RA_8000_M

1_5_225_PRA_802000_M_EX

1_5_220_LPRA_802000_M_LRA_8000_M

1_5_220_PRA_802000_M_RA_8000_M

1_5_225_PRA_802000_M_EX

1_5_220_LPRA_802000_M_LRA_8000_M

1_5_220_PRA_802000_M_RA_8000_M

1_5_126_RA_8000_M_EX

1_5_220_LPRA_802000_M_LRA_8000_M

32 ... 200 KA/802000

Stainless steel

Cylinder

1_5_222_KA_802000_M

1_5_228_KA_802000_M_EX

1_5_230_PRA_822000_M

1_5_235_PRA_822000_M_EX

1_5_240_PRA_842000_M

1_5_245_PRA_842000_M_EX

1_5_250_PRA_862000_M

7

1 3

• • 1_5_255_PRA_862000_M_EX

• • • • 1_5_260_PRA_882000_M

7 11

1 3

7 • • 1_5_265_PRA_882000_M_EX

•

• •

• • •

•

• •

Cylinder with position sensor

1_9_051_PSA_182000_F1

1_9_052_PSA_182000_F1_EX

160 ... 320 SA/8000/F1

Cylinder with position sensor

Datasheet (standard)

1_9_062_SA_8000_F1_EX • •

• • • • •

Standard

Single Acting

Cylinder

-

1_4_101_PRA_801000_803000

• • • •

• Range available. For additional information please contact the technical service or http://www.imi-precision.com

*1) Rail Cylinder Shock and vibaration tested to EN 61373 Category 1; Class A + B

Standard

Single Acting

Cylinder

-

1_4_101_PRA_801000_803000

09/20

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2019 - 9249c) © 2020 Norgren GmbH en 1.5.222.03

Cylinder variants

Symbol

Please see the description below

Versions Piston Rod Material Standard Model with

H L T R

•

•

S

X

X

X

X

C D

Male Piston

Rod Thread

.KA/802000/M

.KA/802000/M

KA/802000/W2

KA/802000/W2

-

Female Piston

Rod Thread

.KA/802000/MX

KA/802000/W2X

ø Description Page

(mm)

32 ... 125 Standard Cylinder

160 ... 200 Standard Cylinder

32 ... 125

160 ... 200

Cylinder with Special Wiper - Seal

(suitable for appl. with cement, plaster (stucco), arizona sand, hoar-frost or ice)

8/9

8

8/9

•

•

•

•

X

X

X

X

X

X

.KA/802000/MU

.KA/802000/MU

KA/802000/W6

KA/802000/W6

.KA/802000/MW

.KA/802000/MW

-

-

.KA/802000/MUX

KA/802000/W6X

32 ... 125

160 ... 200

32 ... 125

160 ... 200

-

.KA/802000/MWX 32 ... 125

160 ... 200

Cylinder with Extended Piston Rod

Maximum stroke: 2000

Maximum extention: 800

Cylinder with Extended Piston Rod and Special

Wiper - Seal Maximum stroke: 2000 suitable for appl. with cement, plaster (stucco), arizona sand, hoar-frost or ice

8/9

8/9

Cylinder without Cushioning

8/9

Note:

•

•

X

X

.KA/802000/JM

.KA/802000/JM -

.KA/802000/JMX 32 ... 125

160 ... 200

Cylinder with Double Ended Piston Rod

X

X

KA/802000/W4

KA/802000/W3 -

KA/802000/W4X 32 ... 125

160 ... 200

Cylinder with Double Ended Piston Rod and

Special Wiper - Seal without Magnet

(suitable for appl. with cement, plaster (stucco), arizona sand, hoar-frost or ice)

Versions: H = Hydraulic (ø 32 ... 100 mm); L = Low temperature -40 °C (-40 °F) (ø 32 - 125mm), -30 °C (-22 °F) (ø 160 -200 mm);

T = High temperature +150 °C (+302 °F); Piston Rod Material: C = Hard chromium plated; D = Stainless steel austenitic & hard chromium plated;

K, S = Stainless steel austenitic; X = Standard; • = Option

9

8/9 en 1.5.222.04

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2019 - 9249c) © 2020 Norgren GmbH 09/20

Option selector

Non-standard variants

High temperature version

+150 °C max. (+302 °F)

Cylinder ø (mm)

032, 040, 050, 063, 080, 100,

125, 160, 200

Variants ø 32 ... 200 mm

(magnetic piston)

Standard

Special wiper/seal

Without cushion

Double ended piston rod

Double ended piston rod, special wiper/seal

Extended piston rod

KA/8*****/MU/****/***

Extended piston rod, special wiper/seal

KA/8*****/W6/****/***

Substitute

T

Substitute

Substitute

M

W2

MW

JM

W4

MU

Extension

(mm)

W6

Extension

(mm)

 KA/802  /  / 

Strokes (mm)

5 ... 2500

Piston rod thread

Male

Substitute

Substitute

None

Female (Ø32 ... 125 mm) X

Note: If postion is not required, disregard option position within part number e.g.

KA/802100/M/100. For combinations of cylinder variants consult our technical service.

Additional variants/options are not possible.

Detail’s see table on page 4.

09/20

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2019 - 9249c) © 2020 Norgren GmbH en 1.5.222.05

Cylinder with Round barrel ø 32 ... 200 mm

1

2

5

6

11

12

23

17

15

Mountings

B, G C D F S SW UF UH

Cyl.

Ø

80

100

125

160

200

32

40

50

63

Position Style

1

2

B, G

C

5

6

1 2 3 4 5 6 1 7 1 2 8 2 3 9 3 4 10 5 5 6 6 7 7 8 8 9 9 1 10 2 3 4 5 6 7 8 9 10

1 2 1 1 3 2 2 4 3 3 5 4 4 6 5 5 7 6 6 8 7 7 9 8 1 8 10 9 2 9 17 10 18 4 13 19 5 14 6 15 15 7 16 16 8 17 17 9 18 10 19 19 11 20 12 13 14 15 16 17 18 19 20

11

20

12

21

31

11

20

30

22

32

14

21

31

15

22

32

30

16

23

33

31

17

24

34

32

18

25

35

33

19

26

36

34 20

37

20

35

19

28

31

20

30

20

29

32

27

31

22

32

33

28

32

23

33

34

29 24

M/P72288

33 34

35

34

25

35

36

25

35

26

36

37

26

36

27

37

38

27

37

20

38

39

28

38

29

39

29

39

21

KQA/8063/40

22 23 24 25 26 27 28 29

31 32 33 34 35 36 37 38 39

KQA/8050/40

KQA/8080/22

KQA/8100/22

KQA/8125/22

–

–

KQA/8080/21

KQA/8100/21

KQA/8125/21

–

–

KQA/8080/23

KQA/8100/23

KQA/8125/23

–

–

KQA/8080/25

KQA/8080/25

KQA/8125/25

–

–

KQA/8063/41

KQA/8100/41

KQA/8100/41

–

–

–

–

M/P72292

M/P72293

–

KQM/8080/32

KQM/8080/32

KQM/8125/32

–

–

KQA/8080/40

KQA/8100/40

KQA/8125/40

–

–

D

SW

Stainless steel

X 5 Cr Ni 18 10 (1.4301; AISI 304). Screws: A2

X 5 Cr Ni 18 10 (1.4301; AISI 304). Screws: A2

X 5 Cr Ni 18 10 (1.4301; AISI 304). Screws: A2

Bolt: X 10 Cr Ni S 18 9 (1.4305; AISI 303)

X 6 Cr Ni 18 9 (1.4308; AISI 304)

Position Style

12

15

S

F

17 UF

Bracket for switches

Standard

Swivel bearing: X 5 Cr Ni 18 10 (1.4301; AISI 304), bearing: PA

Clevis mounting: X 10 Cr Ni S 18 9 (1.4305; AISI 303),

Bolt: X 10 Cr Ni S 18 9 (1.4305; AISI 303),

Circlip: X 10 Cr Ni S 18 9 (1.4305; AISI 303)

X 10 Cr Ni S 18 9 (1.4305; AISI 303), Inner ring X 105 Cr Co Mo 18-2

(1.4528),

Outer ring X 5 Cr Ni 18 10 (1.4301; AISI 304)

Body: PA/PP, screw and holding strap A2

11 UH Adjustable intermediate mounting: X 10 Cr Ni S 18 9 (1.4305; AISI 303),

Bolts: X 10 Cr Ni S 18 9 (1.4305; AISI 303), screws: A2 en 1.5.222.06

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2019 - 9249c) © 2020 Norgren GmbH 09/20

Accessories Round barrel (ø 32 ... 200 mm)

Model Port size

Straight fitting Elbow fitting

ø

KA/802032/M/*

KA/802040/M/*

KA/802050/M/*

KA/802063/M/*

32

40

50

63

G1/8

G1/4

S02250618

S02250628

G1/4 S02250828

G3/8 S02250838

C02470618

C02470628

C02470828

C02470838

KA/802080/M/*

KA/802100/M/*

KA/802125/M/*

KA/802160/M/*

80

100

125

160

G3/8

G1/2

G1/2

G3/4 -

S02251038

S02251248

S02251248

-

C02471038

C02471248

C02471248

KA/802200/M/* 200 G3/4 -

For alternative fitting types please contact the technical service.

ø

80

100

125

160

200

32

40

50

63

Magnetically operated switches

M/50/**

1

Switch mounting brackets for M/50

2 3 4 5 6 7 8 9 10

11 12 13 14 15 16 17 18 19 20

20

30

Page 12-15

21 22 23 24 25 26 27 28 29

31 32 33 34 35 36 37 38 39

Page 15

QM/27/2/1

QM/27/2/1

QM/27/2/1

QM/27/2/1

QM/27/2/1

QM/27/2/1

QM/27/2/1

QM/27/2/1

QM/27/2/1

Sevice kit

Service kit for Round and Profile barrel*

ø

32

40

50

63

KQA/8032/00

KQA/8040/00

KQA/8050/00

KQA/8063/00

80

100

125

160

KQA/8080/00

KQA/8100/00

KQA/8125/00

KQA/8160/00

200 KQA/8200/00

*For TKA high temperature cylinders, replace ‘KQA’ with ‘TQA’ for the high temperature spares kit

09/20

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2019 - 9249c) © 2020 Norgren GmbH en 1.5.222.07

Basic dimensions

KA/802000/M

Standard Cylinder

ø 32 - 200 mm

A

KW l12

WH + $ l 2

VD

ZJ + # + $ l 8 + #

PL

G l 7

EE

G

PL VA

E

TG

KV

Dimensions in mm

Projection/First angle

SW l 3

BG

EE

1

BG

BH

# Stroke

$ Piston rod extension

1 Cushion screw http://www.imi-precision.com

BG

ø

32

40

50

63

80

125

160

A -0,5 ø B

22

24

32

32

40

100 40

54

72

200 72 d11

30

35

40

45

45

55

60

65

75

ø BA d11

30

35

40

45

45

55

60

65

75

BG min

16

16

16

16

17

17

20

28,5

28,5

8

19

19

24

6

8

BH

6

32

32

E

47

53

65

75

95

113

140

180

220

EE

G1/8

G1/4

G1/4

G3/8

G3/8

G1/2

G1/2

G3/4

G3/4

G

29

34,5

33

36,5

42

42

54

55

52,5

KK

M10 x 1,25 17

M12 x 1,25

M16 x 1,5

M16 x 1,5

M36 x 2

M36 x 2

KV

19

24

24

M20 x 1,5 30

M20 x 1,5 30

M27 x 2 41

55

55

KW

ø

32

40

50

63

80

160

RT

M 6

M 6

M 8

M 8

M 10

100 M 10

125 M 12

M 16

200 M 16

SW

10

13

17

17

22

22

27

36

36

U1

4,6

5,8

8,7

10

12

9

12

15

19

U2

6,3

9,2

10,8

12,8

14,5

14,5

17

17

14

VA

3,5

3,5

3,5

3,5

3,5

3,5

5,5

6

6

VD

6

6

6

6

6

6

8

10

10

WH

26

30

37

37

46

51

65

80

95

ZJ

120

135

143

158

174

189

225

260

275

Model

Round barrel

KA/802032/M/* 0,9 (kg)

KA/802040/M/* 1,3 (kg)

KA/802050/M/* 2,0 (kg)

KA/802063/M/* 3,0 (kg)

KA/802080/M/* 5,0 (kg)

KA/802100/M/* 7,3 (kg)

KA/802125/M/*

KA/802160/M/* at

0 mm

12,2 (kg)

23,4 (kg)

KA/802200/M/* 34,4 (kg)

* Please insert stroke length.

Basic Dimension are also for cylinder variants or for different piston rod material

TKA/802000/M - High Temperature Cylinder

KA/802000/W2 - Cylinder with Special Wiper - Seal

KA/802000/MU - Cylinder with Extended Piston Rod

KA/802000/W6 - Cylinder with Extended Piston Rod and Special Wiper - Seal

KA/802000/MW - Cylinder without Cushioning

10

10

13,5

18

18

8

8

5

6

L2 L3

33

35

44

58

67

19,5

22

25

25

-

-

-

-

-

5

5

4

4 per

25 mm

0,06 (kg)

0,08 (kg)

0,13 (kg)

0,14 (kg)

0,30 (kg)

0,34 (kg)

0,51 (kg)

0,88 (kg)

1,14 (kg)

L7

-

1,8

3,8

-

1,8

6,6

5,6

1,6

3,6

BH

L8

128

138

160

180

180

94

105

106

121

L12

13

16

10

10

16

8

8

5,5

6,5

ø MM h9

25

25

32

40

40

12

16

20

20

PL

29,7

27,7

39,7

31,5

26,5

15

21,5

22,7

24,2

TG

72

89

110

140

175

32,5

38

46,5

56,5 en 1.5.222.08

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2019 - 9249c) © 2020 Norgren GmbH 09/20

Cylinder variants

KA/802000/MX; /MUX; /MWX; /W2X; /W6X

Cylinder with Female Piston Rod Thread

WH + $ l 2

VD

PL

G

ZJ + # + $ l8 + # l7

SW

EE

G

PL VA E

TG

Dimensions in mm

Projection/First angle

T2

AF

T1 l 3

BG

EE

BG

BH

1

ø

32

40

50

12

16

AF

12

ø D1

6,4

8,4

10,5

63

80

100

125

16

20

20

32

10,5

13

13

17

For missing dimensions please see page 8.

M10

M12

M12

M16

KF

M6

M8

M10

8

10

10

13 l12

5,5

6,5

8

20

25

25

32

ø MM h9

12

16

20

KA/802000/JM, KA/802000/W4 – Cylinder with Double Ended Piston Rod

KA/802000/JMX, KA/802000/W4X – Cylinder with Double Ended Piston Rod and Female Piston Rod Thread

17

22

22

27

13

17

SW

10

WH

ZM x 2 x # l 8 + #

21

25

25

38

16

21

T1

16

# Stroke

4,7

6,1

6,1

8

T2

2,6

3,3

4,7

ø L8 WH

32

40

50

63

94

105

106

121

80

100

125

160

128

138

160

180

46

51

65

80

200 180 95

* Please insert stroke length; For missing dimensions please see page 8.

26

30

37

37

09/20

ZM

220

240

290

340

370

146

165

180

195

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2019 - 9249c) © 2020 Norgren GmbH

# Stroke

Model Round barrel

KA/802032/JM/*

KA/802040/JM/*

KA/802050/JM/*

KA/802063/JM/*

KA/802080/JM/*

KA/802100/JM/*

KA/802125/JM/*

KA/802160/JM/*

KA/802200/JM/* en 1.5.222.09

Mountings

Front flange B, G

Conforms to ISO 15552, type MF1 and MF2

UF

TF

MF FB

Foot mounting C

Conforms to ISO 15552, type MS1

Dimensions in mm

Projection/First angle

AU AO ø AB

TR

E

Ø

32

40

50

63

80

100

E

50

55

65

75

100

120

9

12

14

9

9

Ø FB MF

7 10

10

12

12

16

16

50

63

75

R

32

36

45

TF

64

72

90

100

126

150

125

154

186

UF

80

90

110 kg

0,26

0,31

0,56

0,73

1,73

2,51

Model (B, G)

KQA/8032/22

KQA/8040/22

KQA/8050/22

KQA/8063/22

KQA/8080/22

KQA/8100/22

Ø

32

40

50

63

80

100

9

12

14

9

9

Ø AB AH

7 32

36

45

50

63

71

13

19

19

12

13

AO

11

5

6

6

5

5

AT

4

32

41

41

AU

24

28

32

74

98

115

E

48

53

64

50

63

75

TR

32

36

45 kg

0,16

Model (C)

KQA/8032/21

0,19 KQA/8040/21

0,32 KQA/8050/21

0,41 KQA/8063/21

0,83 KQA/8080/21

0,98 KQA/8100/21

Rear clevis D

Conforms to ISO 15552, type MP2

LH

UB

CB

FL

L

Piston rod clevis F

Conforms to DIN ISO 8140

LE

CE

RK

CL

CM

R

ER

Ø

32

40

50

63

80

100

40

50

60

CB H14 Ø EK f8 FL

26 10 22

28

32

12

12

25

27

16

16

20

32

36

41

22

22

27

16

17

L

13

LH R

52 9

60

68

12

12

79

99

15

15

119 20

UB kg

45 0,11

Model (D)

KQA/8032/23

52

60

0,16 KQA/8040/23

0,22 KQA/8050/23

70

90

0,34 KQA/8063/23

0,54 KQA/8080/23

110 0,9 KQA/8100/23

Ø

32

KK CE ØCKh11 CL CM ER LE RK kg

M10x1,25 40 10 20 10 16 20 28

Model (F)

0,09 KQM/55433/25

40 M12x1,25 48 12

50/63 M16x1,5 64 16

80/100 M20x1,5 80 20

24

32

40

12

16

20

19

25

32

24

32

32 0,13 KQM/55441/25

41,5 0,33 KQM/55451/25

40 50 0,67 KQM/8080/25 en 1.5.222.010

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2019 - 9249c) © 2020 Norgren GmbH 09/20

Trunnion support S

Conforms to ISO 15552, type AT4

ø D 3

F x 45°

Wide hinge SW

Conforms to ISO 15552, type AB7

EM

BR

Dimensions in mm

Projection/First angle

GL

ø EB

ø D 2

A

B 1

C

B 2

ø HB

TE

UL

RA

UR

Ø A B

1 2

C ØD

1 H7 2 3

32 32 46 18 10,5 12

40/50 36 55 21 12 16

63/80 42 65 23 13

100/125 50 75 28,5 16

20

25

6,6 11 1

F x

45°

H

1 2

T1 kg Model (S)

30 15 6,8 0,1 KQA/8032/41

9 15 1,6 36 18 9 0,14 KQA/8040/41

11 18 1,6 40 20 11 0,18 KQA/8063/41

14 20 2 50 25 13 0,34 KQA/8100/41

Ø CA Ø CK

H9

32 32 10

40 36 12

50 45 12

63 50 16

80 63 16

100 71 20

Ø

D

EM G

1 2 3

H2 K

1 2

L1 R Ø

S kg Model

(SW)

11 26 21 18 31 8 38 51 1,6 10 6,6 0,15 M/P72288

11 28 24 22 35 10 41 53 1,6 11 6,6 0,21 M/P72289

15 32 33 30 45 12 50 65 1,6 13 9 0,41 M/P72290

15 40 37 35 50 12 52 67 1,6 15 9 0,53 M/P72291

18 50 47 40 60 14 66 86 2,5 15 11 0,82 M/P72292

18 60 55 50 70 15 76 96 2,5 19 11 1,22 M/P72293

Universal piston rod eye UF

Conforms to DIN ISO 8139

CN H 7

CE

EN h12

Adjustable trunnion mounting UH

Conforms to ISO 15552, type MT4

1

R

Z

ER LE A EP

L TL TM h 14

1 Locking screws

Torque max: Ø 32 & 40 mm = 6 Nm; Ø 50 & 63 mm = 10 Nm;

Ø 80 & 100 mm = 15 Nm; Ø 125 mm = 25 Nm

Ø

32

40

Thread

KK

AX

M10x1,25 20

M12x1,25 22

50/63 M16x1,5 28

80/100 M20x1,5 33

CE

43

50 12

64

77

Ø

CNH7

10

16

20

EN

-0,1

14

16

21

25

ER LE

14,5 14

16,5 16

21,5 21

25,5 25

Z

13°

13° kg Model (UF)

0,07 KQM/8032/32

0,11 KQM/8040/32

15° 0,21 KQM/8050/32

15° 0,38 KQM/8080/32

Ø L R Ø TD e9

TL TM h14

UW XV min.

XV max.

kg Model

(UH)

32

40

50

63

20 1 12

24 1,6 16

28 1,6 16

28 1,6 20

12

16

16

20

50

63

75

90

53

65

75

95

67,5 78,5 0,24 KQA/8032/40

78,5 86,5 0,48 KQA/8040/40

84

91,5

96 0,7

103,5 1,35

KQA/8050/40

KQA/8063/40

80 28 1,6 20

100 38 2 25

20

25

110

132

115

140

106

117

114

123

1,46

2,76

KQA/8080/40

KQA/8100/40

125 50 2 25 25 160 143 144 146 3,28 KQA/8125/40

Style ‘UH’: It is most important that the locking screws which secure the mounting to the tie rod are tightened to the torque figures shown in the table below.

For maximum energy input, consult our Technical Service.

Unless otherwise specified, units will be supplied with dimension ‘XV’ plus half the

XV max. + # stroke length. ‘XV’ = Distance from the piston rod shoulder to the centre of the mounting.

XV min.

09/20

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2019 - 9249c) © 2020 Norgren GmbH en 1.5.222.011

> Magnetically operated reed switch - Round style

> Suitable for all cylinder ranges with magnetic piston

> LED indicator on LSU models

> Alternative variants allows a wide range of application

Technical features

Operation:

M/50/LSU Normally open with LED (yellow)

Switching voltage (Ub):

10 ... 240 V a.c./170 V d.c.

Switching voltage output:

Ub - 2,7 V

Switching current

(see graph overleaf):

0,18 A max.

Switching power:

10 W/10 VA max.

Contact resistance:

150 mΩ

Response time:

1,8 ms

Operating temperature:

-25 ... +80 °C (-13 ... +176 °F)

High temperature version:

+150 °C max.(+302 °F)

Protection rating (EN 60529):

IP66

Shock resistance:

50 g (during 11 ms)

Vibration resistance:

35 g (at 2000 Hz)

Cable type:

2 x 0,25: PVC, PUR or silikone

3 x 0,25 PVC

Cable length:

2, 5 or 10 m

Electromagnetic compatibility according to:

EN 60947-5-2

Materials:

Body: plastic

Cable: see table below

Technical data - Reed switches - additional information see data sheet en 4.3.005

Symbol

~+ BN

Voltage

(V a.c.) (V d.c.)

Current maximum

(mA)

10 ... 240 10 ... 170 180

10 ... 240 10 ... 170 180

~ BU

BN

BU

10 ... 240 10 ... 170 180

Function Operating temperature

( °C)

Normally open -25 ... +80

Normally open -25 ... +80

Normally open -25 ... +150 —

•

•

LED Protection class

IP 66

IP 66

—

—

Plug Cable length

(m)

2, 5 or 10

5

IP 66 — 2

BK

BU

BN

10 ... 240 10 ... 170 180 Changeover -25 ... +80

1

BN

10 ... 60 10 ... 60 180

10 ... 60 10 ... 60 180

4

* Insert cable length; *1) Plug-in connector see page 12

Normally open -25 ... +80

Normally open -25 ... +80 •

•

— IP 66

IP 66

IP 66

— 5

M8 x 1 0,3

M12 x 1 0,3

Cable type

PVC 2 x 0,25

PUR 2 x 0,25

Weight

(g)

37

37

Model

M/50/LSU/*V

M/50/LSU/5U

Silicon 2 x 0,25 37 TM/50/RAU/2S

PVC 3 x 0,25 37

PVC 3 x 0,25

PVC 3 x 0,25

16

16

M/50/RAC/5V

M/50/LSU/CP *1)

M/50/LSU/CC *1) en 1.5.222.012

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2019 - 9249c) © 2020 Norgren GmbH 09/20

Dimensions

M/50/LSU/*V, M/50/LSU/5U,

TM/50/RAU/2S

Cable length L = 2, 5 or 10 m

Dimensions in mm

Projection/First angle

A-B

5,1 1 30

A

L +30

50 +10

1,5

B

2

M/50/RAC/5V

Cable length L = 5 m

A-B

5,1 1 30

A

L +30 50 +10

1,5

B

3

M/50/LSU/CP

M/50/LSU/CC

A-B

5,1 1

1,5

30

Accessories

Plug-in connector cable with nut

Outer cover Cable length (m) Weight (kg) Connector

PVC 3 x 0,25 5 0,18 M8 x 1

PUR 3 x 0,25

PVC 3 x 0,25

5

5

0,18

0,18

M8 x 1

M8 x 1

PUR 3 x 0,25

PUR 3 x 0,34

5

5

*1) Straight connector

*2) 90° Connector

0,18

0,21

M8 x 1

M12 x 1

Connector

M/P73001/5*1)

M/P73002/5*1)

M/P34615/5*2)

M/34596/5*2)

M/P34594/5*1)

A

300

±15

31,5 ... 36

X

4 BK

X

1 BN

B

4

1 Fixing screw

2 + BN = brown; - BU = blue (output)

3 - BK = black; + BN = brown; - ≠BU = blue

4 Version CP: Plug M8 x 1, color code: BK = +; BN = -; BU = output

Version CC: Plug M12 x 1, color code: BK = +; BN = -; BU = output

3 BU

09/20

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2019 - 9249c) © 2020 Norgren GmbH en 1.5.222.013

> Magnetically operated solid state switch - round style

> IO-Link version available

> Suitable for all cylinder ranges with magnetic piston

> Reliable switching with a very fast reponse time

> Particularly suited for use in high levels of vibration

> LED indicator as standard

> CE certified

> UL listed

Technical features

Operation:

M/50/EAP (PNP) open collector output with LED (yellow)

M/50/EAN (NPN) grounded emitter output with LED (yellow)

M/50/IOP (PNP) Easy IO-Link open collector output with LED

(yellow)

Switching voltage (Ub):

10 ... 30 V d.c.

Switching voltage output:

Ub - 2 V

Inducted voltage:

0,5 V

Switching current

(see graph overleaf):

100 mA max.

Switching power:

3,0 W max.

Response time:

< 0,5 ms for EAP switch

< = 1 ms for IOP switch

Operating frequency:

1 kHz

Protection rating (EN 60529):

IP67 (standard)

IP68 for type: M/50/EAP/5U

Operating temperature:

-40 ... +80 °C (-40 ... 176 °F)

(IP67 & IP68)

Cable type:

PVC 3 x 0,12 (standard)

PUR 3 x 0,14 (M/50/EAP/5U)

Cable length:

2, 5 and 10 m

Electromagnetic compatibility according to:

EN 60947-5-2

Materials:

Body: plastic

Cable: see table below

Technical data - Solid state

Symbol pnp pnp npn

1

3

4

A

+ BN

BU

BK

A

+ BN

BU

BK

+

BU

BN

A

BK

Voltage

(V d.c.)

Current maximum

(mA)

10 ... 30 100

10 ... 30 100

10 ... 30 100

10 ... 30 100

10 ... 30 100

10 ... 30 100

10 ... 30 100

10 ... 30 100 npn

3

1

4

A

+ BU

BN

BK

Function IO-Link

*2)

PNP

PNP

PNP

PNP

PNP

PNP

NPN

NPN

•

•

Operating temperature

( °C)

-40 ... +80

-40 ... +80

-40 ... +80

-40 ... +80

-40 ... +80

-40 ... +80

-40 ... +80

•

•

•

•

•

•

•

LED Protection class

IP67

IP67

IP68

IP67

IP67

IP67

IP67

Plug Cable length

(m)

—

—

—

M8 x 1

2, 5 or 10

5

5

0,3

M8 x 1 0,3

M12 x 1 0,3

— 2, 5 or 10

-40 ... +80 • IP67 M8 x 1 0,3

Cable type

Weight

(g)

PVC 3 x 0,12 37

PVC 3 x 0,12 37

PUR 3 x 0,14 37

PVC 3 x 0,14 16

PVC 3 x 0,14 16

PVC 3 x 0,14 16

PVC 3 x 0,12 37

Model

M/50/EAP/*V

M/50/IOP/5V

M/50/EAP/5U

M/50/EAP/CP *1)

M/50/IOP/CP *1)

M/50/EAP/CC *1)

M/50/EAN/*V

PVC 3 x 0,14 16

* Insert cable length; *1) Plug-in connector below; Color code: BK = black, BN = brown, BU = blue

IO-Link function *2)

Switching current and switching voltage mA · Visual installation aid

· Counter

· Temperature diagnostic

· Power LED

100

3,0 W

M/50/EAN/CP *1) en 1.5.222.014

0

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2019 - 9249c) © 2020 Norgren GmbH

30

V DC

09/20

Dimensions

M/50/EAP/*V,

M/50/EAN/*V

M/50/IOP/5V

Cable length L = 2, 5 or 10 m

M/50/EAP/CP,

M/50/EAN/CP

M/50/IOP/CP

A-B

5,1 1 30

1,5

A-B

5,1 1

1,5

30

Dimensions in mm

Projection/First angle

A

L +30

B

A

300

±15

2

31,5 ... 36

B

3

42

±4

X

1 BN

X

4 BK

3 BU

M/50/EAP/CC A-B

5,1 1

1,5

30

A

300 ±15

47,5 4 BK

X

B

4

1 Fixing screw

2 Color code: BK = black; BN = brown; BU = blue

3

4

Plug M8 x 1

Plug M12 x 1

1 BN

X

3 BU

Accessories

Plug-in connector cable with nut

Outer cover Cable length (m) Weight (kg) Connector

PVC 3 x 0,25 5 0,18 M8 x 1

PUR 3 x 0,25

PVC 3 x 0,25

5

5

0,18

0,18

M8 x 1

M8 x 1

PUR 3 x 0,25 5

PUR 3 x 0,34 5

*1) Straight connector

*2) 90° Connector

0,18

0,21

M8 x 1

M12 x 1

Connector

M/P73001/5*1)

M/P73002/5*1)

M/P34615/5*2)

M/34596/5*2)

M/P34594/5*1)

QM/27/2/1 – Switch mounting brackets for Round barrel

Switch: M/50

ø A B L Weight

(kg)

Model ø A

32 9

40 9

50 7

6

7

5

12

12

12

0,010

0,010

0,010

QM/27/2/1

QM/27/2/1

QM/27/2/1

63 7

80 4

100 3

B

6

4

2

L Weight

(kg)

12 0,010

12 0,010

12 0,010

Model

QM/27/2/1

QM/27/2/1

QM/27/2/1

ø A B L Weight

(kg)

125 -2 -2

160 -10 -9

12

12

0,010

0,010

200 -17 -16 12 0,010

Model

QM/27/2/1

QM/27/2/1

QM/27/2/1

L

09/20

B

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2019 - 9249c) © 2020 Norgren GmbH en 1.5.222.015

EN - Englisch

Warning

These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under » Technical features/ data «.

Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult

Norgren GmbH.

Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes.

The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure.

System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided.

System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. en 1.5.222.016

Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2019 - 9249c) © 2020 Norgren GmbH 09/20