advertisement
Owner’s Manual & Safety Instructions
Save This Manual
Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
20i
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
Copyright © 2020 by Harbor Freight Tools ® . All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
IMPORTANT SAFETY INFORMATION
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Addresses practices not related to personal injury.
General Safety Warnings
WARNING! Read all safety warnings and instructions. Save all warnings and instructions for future reference.
1. Keep work area clean and well lit.
2. This product is not a toy.
Keep it out of reach of children.
3. Inspect before every use; do not use if parts are loose or damaged.
4. Stay alert, watch what you are doing and use common sense when operating Tripod. Do not use Tripod while you are tired or under the influence of drugs, alcohol or medication.
5. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts.
6. Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
7. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS.
Specifications
Adjustable Height
Platform Screw Size
16" - 52"
1/4" - 20
Operation
1. Position the Tripod on a flat and level ground surface capable of support the weight of the
Tripod and Laser Level attached to it.
2. Extend Legs to the desired height by using the Lift Rod and Levers.
Lever
Lift Rod
Page 2 For technical questions, please call 1-888-866-5797.
Item 57710
3. Turn Lift Rod to loosen from Main Shaft then lift the
Tripod to desired height. Once height is achieved, turn to tighten the Lift Rod and secure in place.
4. If needed, use middle Lever on each
Leg to extend height further.
a. Lift Lever and pull leg section down. The middle
Lever adjusts the middle section of the Leg and the lower Lever adjusts the lower section.
b. Once height is achieved, close Lever to lock in place securely.
8. Attach Laser Level to Mounting Plate by screwing it in fully to secure.
9. Reattach Mounting Plate to the Platform.
a. Pull open the Spring Latch and insert the Mounting Plate.
b. Make sure the Mounting Plate is fully inserted and lies flat in the Platform.
c. Release the Spring Latch and be sure it closes fully to secure the Mounting Plate in place.
10. If the height of the Platform needs to be adjusted, first grasp the Handle to support the Tripod.
a. Turn Set Knob to loosed and then rotate
Crank to adjust the Platform’s height.
b. When desired height is achieved, turn Set Knob to tighten securely and then release Handle.
Platform
Lift Lever to open
Push Lever to close
5. Make sure that the Lift Rod and Levers on each Leg are securely locked, and that the Tripod is level.
6. Before attaching the Laser Level, check that its thread size matches the Platform’s screw size.
7. Connect Laser Level to Platform by pulling the
Spring Latch open and removing the Mounting Plate.
Spring
Latch closed
Mounting
Plate
Platform
Spring
Latch open
Handle
Set Knob
Crank
Maintenance and Servicing
Procedures not specifically explained in this manual must be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
1. BEFORE EACH USE, inspect the general condition of the Tripod. Check for loose hardware, misalignment or binding of moving parts, cracked or broken parts, and any other condition that may affect its safe operation.
2. AFTER USE, wipe external surfaces of the tool with clean cloth. Do not immerse the Tripod in any liquids.
3. Store Tripod indoors and out of children’s reach.
Item 57710 For technical questions, please call 1-888-866-5797.
Page 3
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Parts List and Assembly Diagram
Part
1
2
7
8
9
5
6
3
4
Platform
Base
Description
Set Knob
Crank
Main Shaft
Leg
Leg Support
Lift Rod
O-Ring
Qty.
1
1
3
1
1
1
3
1
1
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.
Specify UPC 193175421425 when ordering parts.
8
9
1
2
3
4
5
6
7
LIMITED 90 DAY WARRANTY
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
26541 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797
advertisement
Related manuals
advertisement