ET80

Rugged 2-in-1 Tablet

Quick Start Guide for Microsoft

®

Windows

®

10

MN-004255-02EN Rev A

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners.

© 2021 Zebra Technologies Corporation and/or its affiliates. All rights reserved.

Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of those agreements.

For further information regarding legal and proprietary statements, please go to:

SOFTWARE:  zebra.com/linkoslegal

COPYRIGHTS:  zebra.com/copyright

WARRANTY:  zebra.com/warranty

END USER LICENSE AGREEMENT: zebra.com/eula

Terms of Use

Proprietary Statement

This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries

(“Zebra Technologies”). It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the express, written permission of Zebra

Technologies.

Product Improvements

Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are subject to change without notice.

Liability Disclaimer

Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and disclaims liability resulting therefrom.

Limitation of Liability

In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the accompanying product (including hardware and software) be liable for any damages whatsoever

(including, without limitation, consequential damages including loss of business profits, business interruption, or loss of business information) arising out of the use of, the results of use of, or inability to use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

Publication Date

October 26, 2021

2

ET80 Quick Start Guide

Features

NOTE: Some features may not be available on all configurations.

Figure 1 Front View

1

2

3 4

5

2

6

22

17

18

21

19

20

19

18

17

16

6

7

8

4

5

1

2

3

9

10

11

12

Light sensor

Front microphones

Windows Hello Infrared

Illuminator

Front camera

Camera indicator LED

Touch screen

Stylus tether mount

Volume up/down button

Power button

Charging indicator LED

USB-A port

Threaded Insert

14

13

12

11

10

9

8

7

15

Determines ambient light for controlling display backlight intensity.

Use for voice communications or audio recordings.

Illuminates your face with infrared (IR) light during Windows

Hello face authentication.

Use for video conferencing.

Illuminates when the camera is activated. Momentarily lights white when the device boots.

Displays all information needed to operate the device.

Use to attach a stylus tether mount.

Increases and decreases audio volume.

Turns the display on and off. Press and release to power on the device. Press and hold to reset the device or power off.

Indicates power state and battery charging status while charging and application generated notifications.

Provides USB host and client communications.

Use to restrict access to the USB ports in hazardous locations

(requires boot).

3

ET80 Quick Start Guide

13

14

19

20

21

22

15

16

17

18

USB-A port

USB-C port

Scanner window

Dock interface connector

Speakers

Keyboard latch slot

Provides USB host and client communications.

Provides USB host and client communications, and device charging via cables and accessories.

Provides data capture using the imager.

Provides communication to the device from the dock.

Provides audio output.

Attaches the keyboard to the tablet.

Keyboard alignment slot Assists in aligning the tablet with the keyboard.

Keyboard interface connector Provides power and communication with the keyboard

Kensington security slot

Power interface connector

Use with a security cable to lock the tablet to the keyboard.

Provides power to the device through the dock.

Figure 2 Back View

13

12

5

6

7

8

9

3

4

1

2

11

1

2

4

3

2

1

10

9

8

7

6

5

Rear microphones

Dock alignment slot

Pass-through antenna

Front camera privacy cover switch

Rear camera privacy cover

Rear camera LED flash

Scan button

Fingerprint sensor

Rear camera

Use for audio recordings.

Assists in aligning the tablet with the dock.

Use to connect to an external antenna.

Use to cover the front camera when not in use.

Use to cover the rear camera when not in use.

Provides illumination for the camera.

Initiates barcode data capture when a scan-enabled application is active (programmable).

Provides biometric authentication.

Autofocus camera that takes photos.

4

ET80 Quick Start Guide

10

11

12

13

Communication expansion port

NFC antenna position

Battery cover

Solid State Drive Cover

For Ethernet and serial communication through the expansion adapter.

Use to read NFC cards.

Provides access to the replaceable battery.

Provides access to the solid state drive.

Setting Up the Device

To start using the device for the first time:

1.

Charge the device.

2.

Power on the device.

Device Charging

CAUTION: Ensure that you follow the guidelines for battery safety described in the device Product

Reference Guide.

Before using the tablet for the first time, connect it to an external power source. Keep the tablet connected to the external power source until it is fully charged. The Charging Indicator LED turns green when the tablet is fully charged. You may use the tablet while it is charging.

For the best charging experience, Zebra recommends using the ET80/ET85 dock or the Zebra USB-C to

AC adapter.

The tablet main battery charges from fully depleted to 90% in approximately 2 hours and from fully depleted to 100% in approximately 3 hours.

Charging Indicators

The Charging Indicator LED illuminates and changes color to indicate battery status.

Off

Amber

Green

Red

State Indication

Device is not charging. Device is not inserted correctly in the cradle or connected to a power source. Charger/cradle is not powered.

Device is charging.

Connected to external power and the tablet is fully charged.

Charging error. For example:

• Temperature is too low or too high.

• Charging has gone on too long without completion (typically 8 hours).

• Battery is not installed.

Charging Temperatures

Charge batteries in ambient temperatures from 0°C to 45°C (32°F to 113°F). The tablet or dock always performs battery charging in a safe and intelligent manner. To accomplish this, for small periods of time, the charger alternately enables and disables battery charging to keep the battery at acceptable temperatures.

5

ET80 Quick Start Guide

Charging Accessories

Use one of the following accessories to charge the tablet.

Accessory

Power Only Dock

Part Number

CRD-ET8X-PWRDK1-01

Description

Provides tablet charging only. Requires power supply (PWR-BGA15V45W-UC-WW) with country specific AC line cord.

Vehicle Dock

Office Dock

CRD-ET8X-VEHDK1-01

CRD-ET8X-OFFDK1-01

Provides tablet charging, USB communication,

Ethernet communication, and HDMI.

Provides tablet charging, USB communication,

Ethernet communication, and HDMI. Includes stand. Requires power supply

(PWR-BGA15V45W-UC-WW) with country specific AC line cord.

USB-C to AC adapter PWR-BGA15V45W-UC-WW Provides tablet charging only. Requires country specific AC line cord.

CAUTION: Ensure that you follow the guidelines for battery safety described in the device Product

Reference Guide.

Charging Using the Dock

When the tablet is docked and charging, the charging indicator LED illuminates amber.

1.

Connect the dock to the appropriate power source.

2.

If installed, ensure the keyboard and handle are closed.

3.

Insert the bottom of the tablet into the bottom of the dock (1), aligning the charging contacts on the tablet with the connector pins on the dock.

6

ET80 Quick Start Guide

4.

Rotate the top of the tablet towards the top of the dock (2).

2

1

5.

Use your thumb to push the tablet into the dock, then push the lever down to secure the tablet.

6.

After the tablet is secured in the dock, you can lower the keyboard (optional).

Removing the Tablet

1.

If installed, ensure the keyboard is closed.

7

ET80 Quick Start Guide

2.

To remove the tablet from the dock, lift the lever on top of the dock (1) to release the tablet, rotate the top of the tablet down (2), then lift the tablet out of the dock (3).

Charging Using the USB-C to AC Adapter

Use the USB-C to AC adapter to charge the tablet.

1.

Plug the AC line cord into the USB-C to AC adapter (1).

2.

Plug the AC line cord into the AC wall outlet (2).

2

1

8

ET80 Quick Start Guide

Power Only Dock

The Power Only Dock provides:

• Power for operating the device.

• Charging for the device’s battery and optional Power Pack installed in an Expansion Back.

• Barrel lock and two keys to secure the tablet to the dock.

• Support for VESA 100 x 100, 100 x 50, and 75 x 75.

.

Figure 3 Power Only Dock Setup

3

1

2

1

2

3

Power module

Barrel lock (two keys included)

Lever

9

ET80 Quick Start Guide

Vehicle Dock

The Vehicle Dock provides:

• Power for operating the device.

• Charging for the device’s battery and optional Power Pack installed in an Expansion Back.

• Ports for connecting USB devices and Ethernet communication.

• Barrel lock and two keys to secure the tablet to the dock.

• Support for VESA 100 x 100, 100 x 50, and 75 x 75.

Figure 4 Vehicle Dock Setup

3

2

1

1

2

3

Power module

Barrel lock (two keys included)

Lever

10

ET80 Quick Start Guide

Office Dock

The Office Dock provides:

• Power for operating the device.

• Charging for the device’s battery and optional Power Pack installed in an Expansion Back.

• Ports for connecting USB devices, HDMI video output, and Ethernet communication.

• Barrel lock and two keys to secure the tablet to the dock.

• Desktop mount.

Figure 5 Office Dock Setup

3

2

1

4

3

4

1

2

Power module

Barrel lock (two keys included)

Lever

Desktop mount

11

ET80 Quick Start Guide

Powering On the Tablet

• Press and hold the Power button for at least one second, then release.

Scanning with Internal Imager

To read a barcode, a scan-enabled app is required.

1.

Ensure that an app is open on the tablet and a text field is in focus (text cursor in text field).

2.

Point the scanner exit window at a barcode.

1

3.

4.

Press and hold the Scan button (1). The aiming pattern turns on to assist in aiming.

Ensure the barcode is within the area formed by the aiming pattern. The aiming dot increases visibility in bright lighting conditions.

A beep sounds to indicate the barcode was decoded successfully. When the Internal Scanner is in Pick

List mode, the tablet does not decode the barcode until the aiming dot touches the barcode.

Figure 6 Internal Scanner Aiming Pattern

Figure 7 Internal Scanner Pick List Mode with Multiple Barcodes in Aiming Pattern

5.

Release the scan button. The captured data appears in the text field.

12

ET80 Quick Start Guide

Using the Camera

1.

Ensure the front camera privacy cover (1) or rear camera privacy cover (2) is open.

1

2

2.

3.

4.

Open the camera application. The Camera Indicator LED illuminates.

Point the camera at an object.

Touch the on-screen shutter button to take a photo or record a video.

13

ET80 Quick Start Guide

Reading NFC Cards

The tablet supports reading NFC cards. The NFC antenna is located on the back of the tablet under the

NFC logo.

With an NFC enabled application open, bring the NFC card toward the antenna. Depending upon the application, an audio or visual indication indicates successful reading of the card.

14

ET80 Quick Start Guide

Keyboard

The ET80/ET85 attachable rugged keyboard is a QWERTY keyboard that provides a multi-color backlight and six programmable keys.

For information on configuring the programmable keys, refer to the ET80/ET85 Product Reference Guide.

Figure 8 ET80/ET85 Keyboard Features

1 2

3

2

1

4

5

6

5

6

7

3

4

1

2

8

9

9

8

7

Keyboard latch

Keyboard alignment pin

Tablet interface connector

Keyboard alignment marking

Locking switch

Programmable keys

Touchpad

Right button

Left button

Attaches the keyboard to the tablet.

Assists in aligning the keyboard with the tablet.

Provides power and communication from the tablet.

Use to assist in aligning the tablet and keyboard.

Use to unlock the keyboard from the tablet.

Configure to perform custom actions.

Use to move the cursor, scroll, tap, double-tap, drag and drop, and make multiple text selections.

Use to perform right-clicks.

Use to perform left-clicks.

15

ET80 Quick Start Guide

Attaching the Keyboard

1.

2.

Place the keyboard on a flat and level surface.

Align the keyboard alignment markings on the tablet and keyboard.

3.

Gently press the tablet down onto the keyboard until you hear a click.

When the keyboard is correctly installed, the keyboard locking switch automatically clicks into the lock position and the orange indicator is hidden under the switch.

16

ET80 Quick Start Guide

Removing the Keyboard

1.

2.

Place the tablet on a flat and level surface.

Ensure the keyboard and tablet are in the open position.

3.

Move the keyboard locking switch to the Unlock position.

When in the unlock position, the orange indicator is visible to the left of the switch.

4.

Lift the tablet from the keyboard.

17

ET80 Quick Start Guide

Expansion Backs

The Expansion Backs provide a Power Pack slot for the device and either a hand strap or Smart Card CAC reader.

Installing the Expansion Backs

1.

2.

Power off the tablet before installing or removing the Expansion Back.

Lift the notched corner of the battery cover and carefully lift the battery cover off the device. Store the cover in a safe place.

3.

Align the expansion back with the device. Ensure that the power pack slot cover is aligned with the bottom of the device and the interface connector on expansion back aligns with interface connector (1) on device.

1

18

ET80 Quick Start Guide

4.

Using a T6 Torx screwdriver, secure expansion back to device using four screws. Torque to 14 n-cm.

19

zebra.com