D-Link DSL-2750U User Manual
Reklama
Reklama
DSL-2750U
Wireless N ADSL2+ USB Modem Router
March 2014
User Manual
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Contents
Chapter 1. Introduction..........................................5
Contents and Audience.......................................................5
Conventions.................................................................5
Document Structure..........................................................5
Chapter 2. Overview..............................................6
General Information.........................................................6
Specifications..............................................................7
Product Appearance.........................................................11
Front Panel..............................................................11
Side Panel...............................................................13
Back Panel...............................................................14
Delivery Package...........................................................15
Chapter 3. Installation and Connection..........................16
Before You Begin...........................................................16
Connecting to PC...........................................................18
PC with Ethernet Adapter.................................................18
Obtaining IP Address Automatically in OS Windows XP......................19
Obtaining IP Address Automatically in OS Windows 7.......................22
PC with Wi-Fi Adapter....................................................27
Configuring Wi-Fi Adapter in OS Windows XP...............................28
Configuring Wi-Fi Adapter in OS Windows 7................................29
Connecting to Web-based Interface..........................................31
Web-based Interface Structure..............................................33
Saving and Restoring Settings..............................................36
Chapter 4. Configuring via Web-based Interface..................38
Click'n'Connect............................................................38
Creating WAN Connection..................................................41
PPPoE or PPPoA Connection..............................................41
IPoA or Static IP Connection...........................................48
Dynamic IP Connection..................................................54
Bridge Connection......................................................60
3G Connection..........................................................64
LTE Connection.........................................................68
Checking Internet Availability...........................................71
Configuring Wireless Connection..........................................72
Wireless Network Settings Wizard...........................................75
Virtual Server Settings Wizard.............................................78
Status.....................................................................80
Network Statistics.......................................................80
DSL Status...............................................................81
DHCP.....................................................................82
Routing Table............................................................83
Clients..................................................................84
Net........................................................................85
WAN......................................................................85
Creating ADSL WAN Connection...........................................86
Creating Ethernet WAN Connection.......................................93
Creating 3G WAN Connection.............................................99
Creating LTE WAN Connection...........................................102
LAN.....................................................................104
Page 2 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Wi-Fi.....................................................................106
Basic Settings..........................................................106
Security Settings.......................................................108
MAC Filter..............................................................112
Station List............................................................114
WPS.....................................................................115
Using WPS Function via Web-based Interface............................117
Using WPS Function without Web-based Interface........................117
Additional Settings.....................................................119
Advanced..................................................................121
UPnP....................................................................122
Interface Grouping......................................................124
EtherWAN................................................................127
DDNS....................................................................128
DNS.....................................................................129
Routing.................................................................130
ADSL....................................................................132
Remote Access...........................................................133
Miscellaneous...........................................................135
Firewall..................................................................137
IP Filters..............................................................137
Virtual Servers.........................................................140
DMZ.....................................................................143
MAC Filter..............................................................144
3G Modem..................................................................146
Information.............................................................146
PIN.....................................................................148
USB Storage...............................................................150
Information.............................................................150
Filebrowser.............................................................151
Print Server............................................................152
Samba...................................................................153
FTP.....................................................................154
DLNA....................................................................155
Transmission..............................................................157
Transmission Settings...................................................157
Web-interface Page......................................................159
Control...................................................................160
URL Filter..............................................................160
System....................................................................162
Administrator Password..................................................163
Configuration...........................................................164
System Log..............................................................165
Firmware Upgrade........................................................167
Local Update..........................................................168
Remote Update.........................................................169
NTP Client..............................................................170
Ping....................................................................172
Telnet..................................................................173
Users...................................................................174
Page 3 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Chapter 5. Operation Guidelines................................176
Supported USB Modems......................................................176
Safety Instructions.......................................................178
Wireless Installation Considerations......................................179
Chapter 6. Abbreviations and Acronyms..........................180
Page 4 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Introduction
CHAPTER 1. INTRODUCTION
Contents and Audience
This manual describes the router DSL-2750U and explains how to configure and operate it.
This manual is intended for users familiar with basic networking concepts, who create an in-home local area network, and system administrators, who install and configure networks in offices.
Conventions
text
Example
Before You Begin
Description
The body text of the manual.
A reference to a chapter or section of this manual.
“Quick Installation Guide” A reference to a document.
Change
192.168.1.1
A name of a menu, menu item, control (field, checkbox, dropdown list, button, etc.).
Data that you should enter in the specified field.
!
Information An important note.
Document Structure
Chapter 1 describes the purpose and structure of the document.
Chapter 2 gives an overview of the router's hardware and software features and describes its appearance and the package contents.
Chapter 3 explains how to install the wireless router DSL-2750U and configure a PC in order to access its web-based interface.
Chapter 4 describes all pages of the web-based interface in detail.
Chapter 5 includes safety instructions, tips for networking and the list of supported USB modems.
Chapter 6 introduces abbreviations and acronyms used in this manual.
Page 5 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Overview
CHAPTER 2. OVERVIEW
General Information
DSL-2750U is a multifunction LTE/3G/ADSL/Ethernet router with Wi-Fi and built-in switch. The router allows accessing the Internet via LTE, 3G GSM or CDMA network (with a USB modem 1 connected ). In addition, the device allows accessing the Internet via ADSL technology and via
Ethernet technology.
The router is equipped with an ADSL port to connect to an ADSL line and 4 Ethernet ports to connect workstations. Due to this feature, DSL-2750U represents a moderate-priced solution for creating wired networks without an additional switch. In addition, any Ethernet port of the device can be used to connect to a private Ethernet line. Also the router has a USB port designed to connect a USB modem, printer, or USB storage.
DSL-2750U can operate as a base station for connecting wireless devices of the standards 802.11b,
802.11g, and 802.11n. The router supports multiple functions for the wireless interface: several security standards (WEP, WPA/WPA2), MAC address filtering, and the WPS function.
In addition, the device is equipped with a button for switching the Wi-Fi network off/on. If needed, for example, when you leave home, you can easily switch the router’s WLAN by pressing the button, and devices connected to the LAN ports of the router will stay online.
The wireless router DSL-2750U includes a built-in firewall. The advanced security functions minimize threats of hacker attacks, prevent unwanted intrusions to your network, and block access to unwanted websites for users of your LAN.
You can configure and manage the settings of the multifunction wireless router DSL-2750U via the user-friendly web-based interface (the interface is available in several languages).
Now you can simply update the firmware: the router itself finds approved firmware on D-Link update server and notifies when ready to install it.
1 Not included in the delivery package. D-Link does not guarantee compatibility with all USB modems. Please, refer to the Supported USB Modems section, page 176.
Page 6 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Overview
Specifications
*
Hardware
Interfaces
• ADSL: 1 RJ-11 port
• LAN: 4 RJ-45 10/100BASE-TX Fast Ethernet ports with auto-MDI/MDIX
• WLAN: built-in 802.11b, g, and n wireless interface
• USB 2.0 type A port
Frequency Range
• 2412 ~ 2484MHz
Wireless Data Rate
• 802.11b: 11, 5.5, 2, 1Mbps
• 802.11g: 54, 48, 36, 24, 18, 12, 9, 6Mbps
• 802.11n
◦ HT20: up to 150Mbps
◦ HT40: up to 300Mbps
Transmitter Output Power
The maximum value of the transmitter output power depends upon the radio frequency regulations applied in your country
• 802.11b
◦ 16.5 ~ 18.5dBm
• 802.11g
◦ 13.5 ~ 16.5dBm
• 802.11n
◦ 13.5 ~ 16.5dBm
Modulation Schemes
• 802.11b: CCK (11, 5.5Mbps), DQPSK (2Mbps), DBPSK (1Mbps), DSSS
• 802.11g: PSK/CCK, DBPSK, DQPSK, OFDM, BPSK, QPSK, 64QAM, 16QAM
• 802.11n: PSK/CCK, DBPSK, DQPSK, OFDM, etc.
ADSL Standards
• ADSL
◦ Multi-mode, ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) Annex A, ITU-T G.992.2
(G.lite) Annex A, ITU-T G.994.1 (G.hs)
• ADSL2
◦ ITU-T G.992.3 (G.dmt.bis) Annex A/L/M, ITU-T G.992.4 (G.lite.bis) Annex A
• ADSL2+
◦ ITU-T G.992.5 Annex A/L/M
* The device features are subject to change without notice. For the latest versions of the firmware and relevant documentation, visit www.dlink.ru
.
Page 7 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Software
WAN Connection Types
• LTE
• 3G
• ADSL
◦ PPPoE
◦ PPPoA
◦ IPoA
◦ Static IP
◦ Dynamic IP
◦ Bridge
• Ethernet
◦ PPPoE
◦ Static IP
◦ Dynamic IP
◦ Bridge
Wireless Network
• IEEE 802.11n standard, IEEE 802.11b/g compliant
• WEP data encryption
• WPA/WPA2 security supporting TKIP, AES and TKIP+AES
• MAC-based access to wireless network
• PIN and PBC methods of WPS
• Managing connected stations
• Advanced settings
ATM/PPP Protocols
• Bridged and routed Ethernet encapsulation
• VC-based or LLC-based multiplexing
• ATM Forum UNI3.1/4.0 PVC (up to 8 PVCs)
• ATM Adaptation Layer Type 5 (AAL5)
• ITU-T I.610 OAM F4/F5 loopback
• ATM QoS
• PPP over ATM (RFC 2364)
• PPP over Ethernet (PPPoE)
• Keep-alive for PPP connections
Overview
Page 8 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Network Protocols and Functions
• DHCP server/client/relay
• DNS relay
• DDNS
• Static IP routing
• Remote management
• Network statistics for each interface
• IGMP proxy
• IGMP snooping
• RIP
• UPnP
• Support of VLAN
• WAN ping respond
• Support of SIP
• Support of RTSP
• PPPoE pass through
Firewall and Access Management Functions
• Network Address Translation (NAT)
• Stateful Packet Inspection (SPI)
• IP filters
• MAC filter
• URL filter
• DMZ
• Prevention of ARP and DdoS attacks
• Virtual servers
QoS
• Interface grouping
• VLAN priority (802.1p)
USB Modem *
• Auto connection to available type of supported network (3G/2G)
• Enabling/disabling PIN code check, changing PIN code
USB Storage
• File browser
• Print server
• SMB-based access via accounts
• Built-in FTP server
• Built-in DLNA server
Torrent Client
• Built-in Transmission client
• Uploading/downloading files from/to USB storage
* The listed functions are available for GSM USB modems only.
Page 9 of 182
Overview
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Overview
Configuration and Management
• Multilingual web-based interface for configuration and management
• Access via TELNET
• Firmware update via web-based interface
• Automatic notification on new firmware version
• Saving/restoring configuration to/from file
• Support of remote logging
• Automatic synchronization of system time with NTP server and manual time/date setup
• Ping function
Physical and Environmental
LEDs
• POWER
• DSL
• INTERNET
• WLAN
• LAN 1-4
• WPS
• USB
Power
• External power adapter DC 12V/1A
Buttons
• ON/OFF power switch
• Reset to Factory Defaults button
• WPS/WLAN button
Operating Temperature
• From 0 to 40 °C (from 32 to 104 °F)
Storage Temperature
• From -20 to 70 °C (from -4 to 158 °F)
Humidity
• From 5% to 95% non-condensing
Page 10 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Product Appearance
Front Panel
Overview
LED
POWER
DSL
WLAN
Mode
Solid green
No light
Solid green
Blinking green
No light
Solid green
INTERNET Solid red
No light
Solid green
Blinking green
No light
Figure 1. Front panel view.
Description
The router is powered on.
The router is powered off.
DSL has been synchronized.
Detecting a carrier signal and synchronizing DSL.
No carrier signal.
A WAN connection is established.
When powered on: the router is being loaded; when loaded: the router is in the crash recovery mode.
The router is in the bridge mode or no WAN connection is established.
The router's WLAN is on.
The WLAN interface is active (upstream or downstream traffic).
The router's WLAN is off.
Page 11 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Overview
LED
LAN 1-4
WPS
USB
Mode
Solid green
Blinking green
No light
Blinking green
No light
Solid green
No light
Description
A device is connected to the port of the router (for the LAN port configured as the WAN port: the router is connected to an Ethernet line).
The relevant LAN port is active (upstream or downstream traffic).
The cable is not connected to the relevant port.
Attempting to add a wireless device via the WPS function.
The WPS function is not in use.
A USB device is connected to the router's USB port.
No USB device.
Page 12 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Side Panel
Overview
Name
WPS
WLAN
USB
Figure 2. Side panel view.
Description
A button to enable/disable the router's wireless network and to quickly add wireless devices to the router's WLAN (the WPS function).
To enable/disable the router's wireless network: with the device turned on, press the button, hold for 7 seconds, and then release it.
To use the WPS function: with the device turned on, press the button, and release it.
A port for connecting a USB device (modem, storage, printer).
Page 13 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Back Panel
Overview
Port
DSL
LAN 1-4
RESET
12VDC IN
ON/OFF
Figure 3. Back panel view.
Description
A DSL port to connect the router to the telephone line.
4 Ethernet ports to connect Ethernet devices. One port can be used to connect to a private Ethernet line.
A button to restore the factory default settings.
To restore the factory defaults, push the button (with the device turned on), hold it for 10 seconds, and then release the button.
Power connector.
A button to turn the router on/off.
Page 14 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Overview
Delivery Package
The following should be included:
• Wireless router DSL-2750U
• Power adapter DC 12V/1A
• RJ-11 telephone cable
• Ethernet cable (CAT 5E)
• Splitter
• “ Quick Installation Guide ” (brochure).
The “ User Manual ” and “ Quick Installation Guide ” documents in Russian and English are available on D-Link website (see ftp.dlink.ru/pub/ADSL/DSL-2750U_RA_U2A/Description/ ).
!
Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.
Page 15 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
CHAPTER 3. INSTALLATION AND CONNECTION
Before You Begin
Please, read this manual prior to installing the device. Make sure that you have all the necessary information and equipment.
Operating System
Configuration of the multifunction wireless LTE/3G/ADSL/Ethernet router DSL-2750U
(hereinafter referred to as “the router”) is performed via the built-in web-based interface. The webbased interface is available from any operating system that supports a web browser.
Web Browser
The following web browsers are recommended:
• Apple Safari 5 and later
• Google Chrome 5 and later
• Microsoft Internet Explorer 7 and later
• Mozilla Firefox 5 and later
• Opera 10 and later.
For successful operation, JavaScript should be enabled on the web browser. Make sure that
JavaScript has not been disabled by other software (such as virus protection or web user security packages) running on your computer.
Wired or Wireless NIC (Ethernet or Wi-Fi Adapter)
Any computer that uses the router should be equipped with an Ethernet or Wi-Fi adapter (NIC). If your computer is not equipped with such a device, install an Ethernet or Wi-Fi adapter prior to using the router.
Wireless Connection
Wireless workstations from your network should be equipped with a wireless 802.11b, g, or n NIC
(Wi-Fi adapter). In addition, you should specify the values of SSID, channel number and security settings defined in the web-based interface of the router for all these wireless workstations.
Page 16 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
USB Modem
To connect to a LTE, 3G GSM or CDMA network, you should use a USB modem. Connect it to the
USB port of the router, then access the web-based interface of the router, and you will be able to configure a connection to the Internet 2 .
!
Your USB modem should be equipped with an active identification card (SIM or R-UIM) of your operator.
Some operators require subscribers to activate their USB modems prior to using them.
Please, refer to connection guidelines provided by your operator when concluding the agreement or placed on its website.
For LTE and CDMA USB modems, it is required to disable the PIN code check on the identification card prior to connecting the USB modem to the router.
2 Contact your operator to get information on the service coverage and fees.
Page 17 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
Connecting to PC
PC with Ethernet Adapter
1. Make sure that your PC is powered off.
2. Connect an Ethernet cable between any of four Ethernet ports located on the back panel of the router and the Ethernet port of your PC.
3.
To connect via USB modem: connect your USB modem to the USB port 3 located on the left side panel of the router.
!
If you need to connect or change a USB modem to another one when the router is powered on, power off the device, connect the modem to the USB port, and power on the router.
4.
To connect the router to a DSL line: connect a phone cable between the DSL port of the router and the ADSL OUT port of the splitter. Connect your phone to the PHONE port of the splitter. Then connect another phone cable between a phone jack and the ADSL IN port of the splitter.
5.
To connect the router to an Ethernet line: connect the Ethernet cable between any of four
Ethernet ports located on the back panel of the router and the Ethernet line.
6. Connect the power cord to the power connector port on the back panel of the router, then plug the power adapter into an electrical outlet or power strip.
7. Turn on the router by pressing the ON/OFF button on its back panel.
8. Turn on your PC and wait until your operating system is completely loaded.
3 It is recommended to use a USB extension cable to connect a USB modem to the router.
Page 18 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
Obtaining IP Address Automatically in OS Windows XP
1. Click the Start button and proceed to the Control Panel > Network and Internet
Connections > Network Connections window.
2. In the Network Connections window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed.
Figure 4. The Network Connections window.
Page 19 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
3. In the Local Area Connection Properties window, on the General tab, select the
Internet Protocol (TCP/IP) line. Click the Properties button.
Figure 5. The Local Area Connection Properties window.
Page 20 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
4. Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons. Click the OK button.
Figure 6. The Internet Protocol (TCP/IP) Properties window.
5. Click the ОК button in the connection properties window.
Now your computer is configured to obtain an IP address automatically.
Page 21 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
Obtaining IP Address Automatically in OS Windows 7
1. Click the Start button and proceed to the Control Panel window.
2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by drop-down list in the top right corner of the window), choose the View network status and tasks line under the
Network and Internet section.)
Figure 7. The Control Panel window.
Page 22 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
3. In the menu located on the left part of the window, select the Change adapter settings line.
Figure 8. The Network and Sharing Center window.
Page 23 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed.
Figure 9. The Network Connections window.
Page 24 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
5. In the Local Area Connection Properties window, on the Networking tab, select the
Internet Protocol Version 4 (TCP/IPv4) line. Click the Properties button.
Figure 10. The Local Area Connection Properties window.
Page 25 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
6. Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons. Click the OK button.
Figure 11. The Internet Protocol Version 4 (TCP/IPv4) Properties window.
7. Click the OK button in the connection properties window.
Now your computer is configured to obtain an IP address automatically.
Page 26 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
PC with Wi-Fi Adapter
1.
To connect via USB modem: connect your USB modem to the USB port 4 located on the left side panel of the router.
!
If you need to connect or change a USB modem to another one when the router is powered on, power off the device, connect the modem to the USB port, and power on the router.
2.
To connect the router to a DSL line: connect a phone cable between the DSL port of the router and the ADSL OUT port of the splitter. Connect your phone to the PHONE port of the splitter. Then connect another phone cable between a phone jack and the ADSL IN port of the splitter.
3.
To connect the router to an Ethernet line: connect the Ethernet cable between any of four
Ethernet ports located on the back panel of the router and the Ethernet line.
4. Connect the power cord to the power connector port on the back panel of the router, then plug the power adapter into an electrical outlet or power strip.
5. Turn on the router by pressing the ON/OFF button on its back panel.
6. Turn on your PC and wait until your operating system is completely loaded.
7. Turn on your Wi-Fi adapter. As a rule, modern notebooks with built-in wireless NICs are equipped with a button or switch that turns on/off the wireless adapter (refer to your PC documents). If your PC is equipped with a pluggable wireless NIC, install the software provided with your Wi-Fi adapter.
4 It is recommended to use a USB extension cable to connect a USB modem to the router.
Page 27 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
Configuring Wi-Fi Adapter in OS Windows XP
1. Click the Start button and proceed to the Control Panel > Network and Internet
Connections > Network Connections window.
2. Select the icon of the wireless network connection and make sure that your Wi-Fi adapter is on.
Figure 12. The Network Connections window.
3. Search for available wireless networks.
4. In the opened Wireless Network Connection window, select the wireless network DSL-
2750U and click the Connect button.
After that the Wireless Network Connection Status window appears.
!
If you perform initial configuration of the router via Wi-Fi connection, note that immediately after changing the wireless default settings of the router you will need to reconfigure the wireless connection using the newly specified settings.
Page 28 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
Configuring Wi-Fi Adapter in OS Windows 7
1. Click the Start button and proceed to the Control Panel window.
2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by drop-down list in the top right corner of the window), choose the View network status and tasks line under the
Network and Internet section.)
Figure 13. The Control Panel window.
3. In the menu located on the left part of the window, select the Change adapter settings line.
4. In the opened window, select the icon of the wireless network connection and make sure that your Wi-Fi adapter is on.
5. To open the list of available wireless networks, select the icon of the wireless network connection and click the Connect To button or left-click the network icon in the notification area located on the right side of the taskbar.
Figure 14. The notification area of the taskbar.
Page 29 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
6. In the opened window, in the list of available wireless networks, select the wireless network
DSL-2750U and click the Connect button.
!
Figure 15. The list of available networks.
7. Wait for about 20-30 seconds. After the connection is established, the network icon will be displayed as the signal level scale.
If you perform initial configuration of the router via Wi-Fi connection, note that immediately after changing the wireless default settings of the router you will need to reconfigure the wireless connection using the newly specified settings.
Page 30 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
Connecting to Web-based Interface
When you have configured your computer, you can access the web-based interface and configure needed parameters (for example, create an interface to connect to the Internet, change the parameters of the wireless network, specify the settings of the firewall, edit the password for the administrator account, etc.)
1. Start a web browser (see the Before You Begin section, page 16).
2. In the address bar of the web browser, enter the IP address of the router (by default, the following IP address is specified: 192.168.1.1
). Press the Enter key.
Figure 16. Connecting to the web-based interface of the DSL-2750U device.
3. On the opened page, enter the username and password for the administrator account in the
Login and Password fields correspondingly (by default, the following username and password are specified: admin , admin ). Then click the Enter link.
!
Figure 17. The login page.
If the error “ The page cannot be displayed ” (or “ Unable to display the page ”/“ Could not connect to remote server ”) occurs upon connecting to the web-based interface of the router, make sure that you have properly connected the router to your computer.
Page 31 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
Right after the first access to the web-based interface you are forwarded to the page for changing the administrator password specified by default.
Figure 18. The page for changing the default administrator password.
Enter a new password in the Password and Confirmation fields (you may use digits, Latin letters (uppercase and/or lowercase), and characters available on the keyboard), then click the
Apply link.
!
Remember or write down the new password for the administrator account. In case of losing the new password, you can access the settings of the router only after restoring the factory default settings via the hardware RESET button. This procedure wipes out all settings that you have configured for your router.
Page 32 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Web-based Interface Structure
After successful registration the router's quick settings page opens.
Installation and Connection
Figure 19. The quick settings page.
The web-based interface of the router is multilingual. Select a needed language from the menu displayed when the mouse pointer is over the Language caption. You can change the language of the web-based interface in any menu item.
Figure 20. Changing the language of the web-based interface.
After selecting the language, the notification on unsaved changes will be displayed. Click the Save icon ( ) to save the current language of the web-based interface as the default language.
The quick settings page displays general information on the router and its software, and data on the
DSL connection state.
Page 33 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
On the quick settings page you can run a needed Wizard, quickly get to some pages of the webbased interface, search for a specific page, or switch to the advanced settings section.
To upgrade the firmware of the router, left-click the current firmware version (the right column of the Firmware version line). After clicking the line, the System / Firmware upgrade page opens (for the detailed description of the page, see the Firmware Upgrade section, page 167).
To contact the technical support group (to send an e-mail), left-click the support e-mail address (the right column of the Support line). After clicking the line, the e-mail client window for sending a new letter to the specified address opens.
To edit the router's local interface parameters, left-click the IP or MAC address of the local interface
(the right column of the LAN IP line or LAN MAC line correspondingly). After clicking the line, the page for editing the LAN interface opens (for the detailed description of the page, see the LAN section, page 104).
To configure the router's WLAN parameters, left-click the SSID of the WLAN (the right column of the SSID line). After clicking the line, the Wi-Fi / Basic settings page opens (for the detailed description of the page, see the Basic Settings section, page 106).
To configure connection to the Internet, click the Click'n'Connect link in the Net section (for the detailed description of the Wizard, see the Click'n'Connect section, page 38).
To configure the router's wireless network, click the Wireless network settings wizard link in the Wi-Fi section (for the detailed description of the Wizard, see the Wireless Network Settings
Wizard section, page 75).
To configure access from the Internet to a web server located in your LAN, click the Virtual server settings wizard link in the Firewall section (for the detailed description of the Wizard, see the Virtual Server Settings Wizard section, page 78).
To configure all parameters of the router independently without the Wizards, click the Advanced settings link in the bottom right corner of the page.
Page 34 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
Figure 21. The advanced settings page.
The pages of the Status section display data on the current state of the router (for the description of the pages, see the Status section, page 80).
The pages of the Net section are designed for configuring basic parameters of the LAN interface of the router and creating a connection to the Internet (for the description of the pages, see the Net section, page 85).
The pages of the Wi-Fi section are designed for specifying all needed settings of the router's wireless network (for the description of the pages, see the Wi-Fi section, page 106). Also you can enable or disable the device's WLAN directly from the advanced settings page. To enable the
WLAN, select the On position ( ) of the Enable/Disable Wi-Fi switch. To disable the
WLAN, select the Off position ( ) of the Enable/Disable Wi-Fi switch.
The pages of the Advanced section are designed for configuring additional parameters of the router (for the description of the pages, see the Advanced section, page 121).
The pages of the Firewall section are designed for configuring the firewall of the router (for the description of the pages, see the Firewall section, page 137).
The pages of the 3G modem section are designed to operate the connected 3G USB modem (for the description of the pages, see the 3G Modem section, page 146).
The pages of the USB storage section are designed to operate the connected USB storage (for the description of the pages, see the USB Storage section, page 150).
The pages of the Transmission section are designed for configuration of the built-in Transmission torrent client and management of downloading process (for the description of the pages, see the
Transmission section, page 157).
Page 35 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
The pages of the Control section are designed for creating restrictions on access to the Internet (for the description of the page, see the Control section, page 160).
The pages of the System section provide functions for managing the internal system of the router
(for the description of the pages, see the System section, page 162).
Also you can find a specific page via search. To do this, enter the name of the page, wholly or partly, in the search bar in the top part of the web-based interface page, and then select a needed link in the search results.
Figure 22. The page displaying the search results.
Saving and Restoring Settings
!
Note that you should regularly save the changes of the router's settings to the nonvolatile memory.
The router's web-based interface displays the notification on unsaved changes at the top of the page.
Figure 23. The notification on unsaved changes.
Place the mouse pointer on the Notifications icon ( ) to view the list of unsaved changes and click the relevant link.
Page 36 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Installation and Connection
You can save the router's settings via the top-page menu displayed when the mouse pointer is over the System caption.
Figure 24. The top-page menu.
Click the Reboot line if you have already saved the router's settings.
Click the Save&Reboot line to save new settings and immediately reboot the router.
Click the Save line to save new settings to the non-volatile memory and continue configuring the device. Also you can save the device's parameters via the Save button on the System /
Configuration page.
Click the Backup line and follow the dialog box appeared to save the configuration (all settings of the router) to your PC. Also you can save the router's configuration to your PC via the Backup button on the System / Configuration page.
Click the Factory line to restore the factory default settings. Also you can restore the factory defaults via the Factory button on the System / Configuration page.
Also you can restore the factory default settings via the hardware RESET button located on the back panel of the router. Use a small paperclip to activate the button; insert it into the hole (with the device turned on ), push, and hold for 10 seconds. Release the button and wait until the router is rebooted (about a minute).
Now you can access the web-based interface of the router using the default IP address, username and password.
When you have configured all needed settings, click the Logout line.
Page 37 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
CHAPTER 4. CONFIGURING VIA WEB-BASED
INTERFACE
Click'n'Connect
To configure a WAN connection, click the Click'n'Connect link in the Net section.
Figure 25. Configuring a WAN connection.
Connect a phone cable, Ethernet cable, or USB modem to the router (see the Connecting to PC section, page 18).
Click the Next button to continue.
Page 38 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 26. The page for selecting a 3G network operator.
On the opened page, from the Provider drop-down list, select your country and operator if you are going to configure a 3G network connection, or leave the Manually value, if you are going to configure a wired or LTE WAN connection or you want to specify all settings for your 3G WAN connection independently.
Click the Next button to continue.
Page 39 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 27. The page for selecting the connection type.
On the opened page, select the needed choice of the radio button and click the Next button.
Figure 28. The page for selecting a port or interface.
On the opened page, select a port or interface to which the new connection will be assigned and click the Next button.
Page 40 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Creating WAN Connection
PPPoE or PPPoA Connection
Configuring via Web-based Interface
Figure 29. Configuring PPPoE WAN connection.
In the Connection name field, specify a name for the connection for easier identification.
For ADSL WAN connection, fill in the VPI and VCI fields.
In the Username field, enter your login, and in the Password and Password confirmation fields – the password provided by your ISP.
As a rule, the specified settings are enough to configure a connection of the selected type. If you need to specify additional settings, open the expert settings mode. To do this, use the switch in the bottom left corner of the page. After switching to the expert settings mode, the following sections are displayed: ATM (for ADSL WAN connection), Ethernet (for Ethernet WAN connection), PPP ,
Miscellaneous , and VLAN .
Page 41 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 30. Configuring PPPoE WAN connection. The expert settings mode. The ATM section.
Parameter Description
Connection name A name for connection for easier identification.
ATM
VPI
VCI
Virtual Path Identifier. The valid range is from 0 to 250.
Virtual Circuit Identifier. The valid range is from 32 to 65535.
Encapsulation Mode Select LLC or VC from the drop-down list.
QoS A class of traffic for this connection.
UBR
( Unspecified Bit Rate ): The UBR service is used for applications that allow various delays and losses of packets. It is appropriate to use the UBR service for text/data/image transfer applications, as well as messaging, distribution, retrieval, and remote terminal applications.
UBR with PCR
( Unspecified Bit Rate with Peak Cell Rate ): The UBR service is used for applications that allow various delays and losses of packets.
The Peak Cell Rate is a determining factor in how often cells are sent in an effort to minimize lag or jitter caused by traffic inconsistencies. When you select this value from the drop-down list,
Page 42 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Parameter
Configuring via Web-based Interface
Description the Peak Cell Rate field is displayed. Specify a required value (in cells per second).
CBR
( Constant Bit Rate ): This service is used for applications that require a constant data rate. It is mostly used for transferring uncompressed audio and video, e.g. videoconferencing, interactive audio (telephony), audio/video distribution (television, distance education, e-shops), and retrieval (video-on demand, audio libraries). When you select this value from the drop-down list, the
Peak Cell Rate field is displayed. Specify a required value (in cells per second).
Non Realtime VBR
( Non-Real-time Variable Bit Rate ): This service can be used for transferring data that have critical response-time requirements, e.g. air ticket booking, bank transactions, and process monitoring. When you select this value from the drop-down list, the Peak Cell Rate ,
Sustainable Cell Rate , and Maximum Burst Size fields are displayed. Specify required values.
Realtime VBR
( Real-time Variable Bit Rate ): This service is used for delaysensitive applications such as real time video. The Rt-VBR provides higher network flexibility than the CBR service. When you select this value from the drop-down list, the Peak Cell Rate ,
Sustainable Cell Rate , and Maximum Burst Size fields are displayed. Specify required values.
Page 43 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 31. Configuring PPPoE WAN connection. The expert settings mode. The Ethernet section.
Parameter Description
MTU
Ethernet
The maximum size of units transmitted by the interface.
A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding. In the field, enter the MAC address registered by your ISP upon concluding the agreement.
MAC
You can click the Clone MAC Address button ( ) to set the
MAC address of the network interface card (of the computer that is being used to configure the router at the moment) as the MAC address of the WAN interface.
Also you can set the address of a device connected to the router's
LAN at the moment. To do this, select the relevant value from the drop-down list (the field will be filled in automatically).
Page 44 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 32. Configuring PPPoE WAN connection. The expert settings mode. The PPP section.
Parameter Description
Username
PPP
A username (login) to access the Internet.
Without authorization
Service name
Select the checkbox if you don't need to enter a username and password to access the Internet.
Password A password to access the Internet.
Password confirmation The confirmation of the entered password (to avoid mistypes).
Displayed for the PPPoE type only.
The name of the PPPoE authentication server.
Authentication algorithm
MTU
Keep Alive
Select a required authentication method from the drop-down list or leave the AUTO value.
The maximum size of units transmitted by the interface.
Select the checkbox if you want the router to keep you connected to your ISP even when the connection has been inactive for a specified period of time. When the checkbox is selected, the LCP interval and LCP fails fields are available. Specify the required values.
Page 45 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Parameter
Dial on demand
PPP IP extension
Static IP Address
PPP debug
Configuring via Web-based Interface
Description
Select the checkbox if you want the router to establish connection to the Internet on demand. In the Maximum idle time field, specify a period of inactivity (in seconds) after which the connection should be terminated.
This option is used by some ISPs. Contact your ISP to clarify if this checkbox needs to be enabled.
Fill in the field if you want to use a static IP address to access the
Internet.
Select the checkbox if you want to log all data on PPP connection debugging.
Figure 33. Configuring PPPoE WAN connection. The expert settings mode. The Miscellaneous and VLAN sections.
Page 46 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter
Enable RIP
Enable IGMP Multicast
NAT
Firewall
Ping
Description
Miscellaneous
Select the checkbox to allow using RIP for this connection.
Select the checkbox to allow multicast traffic from the external network (e.g. video streaming) to be received.
Select the checkbox if you want one WAN IP address to be used for all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS attacks.
Select the checkbox to allow the router to answer ping requests from the external network through this connection. For security reasons, it is recommended not to select this checkbox.
VLAN (displayed for the PPPoE type only)
Allow to create several connections assigned to this port
Select the checkbox to allow the router to use several untagged connections.
Use VLAN
VLAN ID
Select the checkbox to allow the router to use tagged VLAN connections.
An identifier for the VLAN. The field is displayed when the Use
VLAN checkbox is selected.
VLAN priority
A priority tag for the type of traffic transmitted. The field is displayed when the Use VLAN checkbox is selected.
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Apply button to create the connection or the Back button to specify other settings.
After clicking the Apply button, the page for checking the Internet availability opens (see the
Checking Internet Availability section, page 71).
Page 47 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
IPoA or Static IP Connection
Configuring via Web-based Interface
Figure 34. Configuring Static IP WAN connection.
In the Connection name field, specify a name for the connection for easier identification.
For ADSL WAN connection, fill in the VPI and VCI fields.
Fill in the IP Address and Netmask fields.
In the Gateway IP address field, enter the IP address of the gateway used by this WAN connection.
In the Primary DNS server field, enter the address of the primary DNS server.
As a rule, the specified settings are enough to configure a connection of the selected type. If you need to specify additional settings, open the expert settings mode. To do this, use the switch in the bottom left corner of the page. After switching to the expert settings mode, the following sections are displayed: ATM (for ADSL WAN connection), Ethernet (for Ethernet WAN connection), IP ,
Miscellaneous , and VLAN .
Page 48 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 35. Configuring Static IP WAN connection. The expert settings mode. The ATM and IP sections.
Parameter Description
Connection name A name for connection for easier identification.
ATM
VPI
VCI
Virtual Path Identifier. The valid range is from 0 to 250.
Virtual Circuit Identifier. The valid range is from 32 to 65535.
Encapsulation Mode Select LLC or VC from the drop-down list.
QoS A class of traffic for this connection.
UBR
( Unspecified Bit Rate ): The UBR service is used for applications that allow various delays and losses of packets. It is appropriate to use the UBR service for text/data/image transfer applications, as well as messaging, distribution, retrieval, and remote terminal applications.
UBR with PCR
( Unspecified Bit Rate with Peak Cell Rate ): The UBR service is used for applications that allow various delays and losses of packets.
The Peak Cell Rate is a determining factor in how often cells are sent in an effort to minimize lag or jitter caused by traffic inconsistencies. When you select this value from the drop-down list,
Page 49 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter Description the Peak Cell Rate field is displayed. Specify a required value (in cells per second).
CBR
( Constant Bit Rate ): This service is used for applications that require a constant data rate. It is mostly used for transferring uncompressed audio and video, e.g. videoconferencing, interactive audio (telephony), audio/video distribution (television, distance education, e-shops), and retrieval (video-on demand, audio libraries). When you select this value from the drop-down list, the
Peak Cell Rate field is displayed. Specify a required value (in cells per second).
Non Realtime VBR
( Non-Real-time Variable Bit Rate ): This service can be used for transferring data that have critical response-time requirements, e.g. air ticket booking, bank transactions, and process monitoring. When you select this value from the drop-down list, the Peak Cell Rate ,
Sustainable Cell Rate , and Maximum Burst Size fields are displayed. Specify required values.
Realtime VBR
( Real-time Variable Bit Rate ): This service is used for delaysensitive applications such as real time video. The Rt-VBR provides higher network flexibility than the CBR service. When you select this value from the drop-down list, the Peak Cell Rate ,
Sustainable Cell Rate , and Maximum Burst Size fields are displayed. Specify required values.
IP
IP Address
Netmask
Enter an IP address for this WAN connection.
Enter a subnet mask for this WAN connection.
Gateway IP address Enter an IP address of the gateway used by this WAN connection.
Primary DNS server/
Secondary DNS server
Enter addresses of the primary and secondary DNS servers in the relevant fields.
Page 50 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 36. Configuring Static IP WAN connection. The expert settings mode. The Ethernet section.
Parameter Description
MTU
Ethernet
The maximum size of units transmitted by the interface.
A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding. In the field, enter the MAC address registered by your ISP upon concluding the agreement.
MAC
You can click the Clone MAC Address button ( ) to set the
MAC address of the network interface card (of the computer that is being used to configure the router at the moment) as the MAC address of the WAN interface.
Also you can set the address of a device connected to the router's
LAN at the moment. To do this, select the relevant value from the drop-down list (the field will be filled in automatically).
Page 51 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 37. Configuring Static IP WAN connection. The expert settings mode. The Miscellaneous and VLAN sections.
Parameter Description
Enable RIP
Miscellaneous
Select the checkbox to allow using RIP for this connection.
Enable IGMP Multicast
NAT
Firewall
Ping
Select the checkbox to allow multicast traffic from the external network (e.g. video streaming) to be received.
Select the checkbox if you want one WAN IP address to be used for all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS attacks.
Select the checkbox to allow the router to answer ping requests from the external network through this connection. For security reasons, it is recommended not to select this checkbox.
VLAN (displayed for the Static IP type only)
Allow to create several connections assigned to this port
Select the checkbox to allow the router to use several untagged connections.
Page 52 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter
Use VLAN
VLAN ID
Description
Select the checkbox to allow the router to use tagged VLAN connections.
An identifier for the VLAN. The field is displayed when the Use
VLAN checkbox is selected.
VLAN priority
A priority tag for the type of traffic transmitted. The field is displayed when the Use VLAN checkbox is selected.
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Apply button to create the connection or the Back button to specify other settings.
After clicking the Apply button, the page for checking the Internet availability opens (see the
Checking Internet Availability section, page 71).
Page 53 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Dynamic IP Connection
Configuring via Web-based Interface
Figure 38. Configuring Dynamic IP WAN connection.
In the Connection name field, specify a name for the connection for easier identification.
For ADSL WAN connection, fill in the VPI and VCI fields.
If your ISP has provided the addresses of the DNS servers, deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field.
As a rule, the specified settings are enough to configure a connection of the selected type. If you need to specify additional settings, open the expert settings mode. To do this, use the switch in the bottom left corner of the page. After switching to the expert settings mode, the following sections are displayed: ATM (for ADSL WAN connection), Ethernet (for Ethernet WAN connection), IP ,
Miscellaneous , and VLAN .
Page 54 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 39. Configuring Dynamic IP WAN connection. The expert settings mode. The ATM and IP sections.
Parameter Description
Connection name A name for connection for easier identification.
ATM
VPI
VCI
Virtual Path Identifier. The valid range is from 0 to 250.
Virtual Circuit Identifier. The valid range is from 32 to 65535.
Encapsulation Mode Select LLC or VC from the drop-down list.
QoS A class of traffic for this connection.
UBR
( Unspecified Bit Rate ): The UBR service is used for applications that allow various delays and losses of packets. It is appropriate to use the UBR service for text/data/image transfer applications, as well as messaging, distribution, retrieval, and remote terminal applications.
UBR with PCR
( Unspecified Bit Rate with Peak Cell Rate ): The UBR service is used for applications that allow various delays and losses of packets.
The Peak Cell Rate is a determining factor in how often cells are sent in an effort to minimize lag or jitter caused by traffic inconsistencies. When you select this value from the drop-down list,
Page 55 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter
Obtain DNS server addresses automatically
Primary DNS server/
Secondary DNS server
Vendor ID
Hostname
Description the Peak Cell Rate field is displayed. Specify a required value (in cells per second).
CBR
( Constant Bit Rate ): This service is used for applications that require a constant data rate. It is mostly used for transferring uncompressed audio and video, e.g. videoconferencing, interactive audio (telephony), audio/video distribution (television, distance education, e-shops), and retrieval (video-on demand, audio libraries). When you select this value from the drop-down list, the
Peak Cell Rate field is displayed. Specify a required value (in cells per second).
Non Realtime VBR
( Non-Real-time Variable Bit Rate ): This service can be used for transferring data that have critical response-time requirements, e.g. air ticket booking, bank transactions, and process monitoring. When you select this value from the drop-down list, the Peak Cell Rate ,
Sustainable Cell Rate , and Maximum Burst Size fields are displayed. Specify required values.
Realtime VBR
( Real-time Variable Bit Rate ): This service is used for delaysensitive applications such as real time video. The Rt-VBR provides higher network flexibility than the CBR service. When you select this value from the drop-down list, the Peak Cell Rate ,
Sustainable Cell Rate , and Maximum Burst Size fields are displayed. Specify required values.
IP
Select the checkbox to configure automatic assignment of DNS server addresses. If the checkbox is selected, the Primary DNS server and Secondary DNS server fields are not displayed.
Enter addresses of the primary and secondary DNS servers in the relevant fields.
The identifier of your ISP. Optional .
A name of the router specified by your ISP. Optional .
Page 56 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 40. Configuring Dynamic IP WAN connection. The expert settings mode. The Ethernet section.
Parameter Description
MTU
Ethernet
The maximum size of units transmitted by the interface.
A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding. In the field, enter the MAC address registered by your ISP upon concluding the agreement.
MAC
You can click the Clone MAC Address button ( ) to set the
MAC address of the network interface card (of the computer that is being used to configure the router at the moment) as the MAC address of the WAN interface.
Also you can set the address of a device connected to the router's
LAN at the moment. To do this, select the relevant value from the drop-down list (the field will be filled in automatically).
Page 57 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 41. Configuring Dynamic IP WAN connection. The expert settings mode. The Miscellaneous and
VLAN sections.
Parameter Description
Enable RIP
Miscellaneous
Select the checkbox to allow using RIP for this connection.
Enable IGMP Multicast
NAT
Firewall
Select the checkbox to allow multicast traffic from the external network (e.g. video streaming) to be received.
Select the checkbox if you want one WAN IP address to be used for all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS attacks.
Ping
Select the checkbox to allow the router to answer ping requests from the external network through this connection. For security reasons, it is recommended not to select this checkbox.
VLAN
Allow to create several connections assigned to this port
Select the checkbox to allow the router to use several untagged connections.
Page 58 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter
Use VLAN
VLAN ID
Description
Select the checkbox to allow the router to use tagged VLAN connections.
An identifier for the VLAN. The field is displayed when the Use
VLAN checkbox is selected.
VLAN priority
A priority tag for the type of traffic transmitted. The field is displayed when the Use VLAN checkbox is selected.
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Apply button to create the connection or the Back button to specify other settings.
After clicking the Apply button, the page for checking the Internet availability opens (see the
Checking Internet Availability section, page 71).
Page 59 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Bridge Connection
Configuring via Web-based Interface
Figure 42. Configuring Bridge WAN connection.
In the Connection name field, specify a name for the connection for easier identification.
For ADSL WAN connection, fill in the VPI and VCI fields.
As a rule, the specified settings are enough to configure a connection of the selected type. If you need to specify additional settings, open the expert settings mode. To do this, use the switch in the bottom left corner of the page. After switching to the expert settings mode, the following sections are displayed: ATM (for ADSL WAN connection), Ethernet (for Ethernet WAN connection), and
VLAN .
Page 60 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 43. Configuring Bridge WAN connection. The expert settings mode. The ATM and VLAN sections.
Parameter Description
Connection name A name for connection for easier identification.
ATM
VPI Virtual Path Identifier. The valid range is from 0 to 250.
VCI Virtual Circuit Identifier. The valid range is from 32 to 65535.
Encapsulation Mode Select LLC or VC from the drop-down list.
QoS A class of traffic for this connection.
UBR
( Unspecified Bit Rate ): The UBR service is used for applications that allow various delays and losses of packets. It is appropriate to use the UBR service for text/data/image transfer applications, as well as messaging, distribution, retrieval, and remote terminal applications.
UBR with PCR
( Unspecified Bit Rate with Peak Cell Rate ): The UBR service is used for applications that allow various delays and losses of packets.
The Peak Cell Rate is a determining factor in how often cells are sent in an effort to minimize lag or jitter caused by traffic inconsistencies. When you select this value from the drop-down list,
Page 61 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter
VLAN ID
VLAN priority
Description the Peak Cell Rate field is displayed. Specify a required value (in cells per second).
CBR
( Constant Bit Rate ): This service is used for applications that require a constant data rate. It is mostly used for transferring uncompressed audio and video, e.g. videoconferencing, interactive audio (telephony), audio/video distribution (television, distance education, e-shops), and retrieval (video-on demand, audio libraries). When you select this value from the drop-down list, the
Peak Cell Rate field is displayed. Specify a required value (in cells per second).
Non Realtime VBR
( Non-Real-time Variable Bit Rate ): This service can be used for transferring data that have critical response-time requirements, e.g. air ticket booking, bank transactions, and process monitoring. When you select this value from the drop-down list, the Peak Cell Rate ,
Sustainable Cell Rate , and Maximum Burst Size fields are displayed. Specify required values.
Realtime VBR
( Real-time Variable Bit Rate ): This service is used for delaysensitive applications such as real time video. The Rt-VBR provides higher network flexibility than the CBR service. When you select this value from the drop-down list, the Peak Cell Rate ,
Sustainable Cell Rate , and Maximum Burst Size fields are displayed. Specify required values.
VLAN
Allow to create several connections assigned to this port
Select the checkbox to allow the router to use several untagged connections.
Use VLAN
Select the checkbox to allow the router to use tagged VLAN connections.
An identifier for the VLAN. The field is displayed when the Use
VLAN checkbox is selected.
A priority tag for the type of traffic transmitted. The field is displayed when the Use VLAN checkbox is selected.
Page 62 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 44. Configuring Bridge WAN connection. The expert settings mode. The Ethernet section.
Parameter Description
MTU
Ethernet
The maximum size of units transmitted by the interface.
A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding. In the field, enter the MAC address registered by your ISP upon concluding the agreement.
MAC
You can click the Clone MAC Address button ( ) to set the
MAC address of the network interface card (of the computer that is being used to configure the router at the moment) as the MAC address of the WAN interface.
Also you can set the address of a device connected to the router's
LAN at the moment. To do this, select the relevant value from the drop-down list (the field will be filled in automatically).
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Apply button to create the connection or the Back button to specify other settings.
After clicking the Apply button, the page for checking the Internet availability opens (see the
Checking Internet Availability section, page 71).
Page 63 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
3G Connection
Configuring via Web-based Interface
Figure 45. Configuring 3G WAN connection.
In the Connection name field, specify a name for the connection for easier identification.
In the Username field, enter your login, and in the Password and Password confirmation fields – the password provided by your 3G operator.
In the APN field (for GSM USB modems only), enter the access point name, and in the Dial number field, enter the number dialed to connect to the authorization server of the operator.
As a rule, the specified settings are enough to configure a connection of the selected type. If you need to specify additional settings, open the expert settings mode. To do this, use the switch in the bottom left corner of the page.
Page 64 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 46. Configuring 3G WAN connection. The expert settings mode. The PPP section.
Parameter Description
Connection name
Mode
A name for connection for easier identification.
The value of the field specifies the type of the network to which the router connects. Leave the auto value to let the router connect automatically to an available type of network, or select a needed value from the drop-down list.
For GSM USB modems only .
Username
PPP
A username (login) to connect to the network of the operator.
Without authorization Select the checkbox if your operator does not require authorization.
Password A password to connect to the network of the operator.
Password confirmation The confirmation of the entered password (to avoid mistypes).
APN
Dial number
Authentication algorithm
An access point name. For GSM USB modems only .
A number dialed to connect to the authorization server of the operator.
Select a required authentication method from the drop-down list or leave the AUTO value.
Page 65 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Parameter
MTU
Keep Alive
Extra options
Dial on demand
PPP debug
Configuring via Web-based Interface
Description
The maximum size of units transmitted by the interface. Optional .
Select the checkbox if you want the router to keep you connected to the network of your operator even when the connection has been inactive for a specified period of time. When the checkbox is selected, the LCP interval and LCP fails fields are available.
Specify the required values.
In the field, you can specify additional data for encryption or authentication. Optional .
Select the checkbox if you want the router to establish connection to the Internet on demand. In the Maximum idle time field, specify a period of inactivity (in seconds) after which the connection should be terminated.
Select the checkbox if you want to log all data on PPP connection debugging.
Figure 47. Configuring 3G WAN connection. The expert settings mode. The Miscellaneous section.
Page 66 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter
NAT
Firewall
Description
Miscellaneous
Select the checkbox if you want one WAN IP address to be used for all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS attacks.
Ping
Select the checkbox to allow the router to answer ping requests from the external network through this connection. For security reasons, it is recommended not to select this checkbox.
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Apply button to create the connection or the Back button to specify other settings.
After clicking the Apply button, the page for checking the Internet availability opens (see the
Checking Internet Availability section, page 71).
Page 67 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
LTE Connection
Configuring via Web-based Interface
Figure 48. Configuring LTE WAN connection.
In the Connection name field, specify a name for the connection for easier identification.
If your ISP has provided the addresses of the DNS servers, deselect the Obtain DNS server addresses automatically checkbox and fill in the Primary DNS server field.
As a rule, the specified settings are enough to configure a connection of the selected type. If you need to specify additional settings, open the expert settings mode. To do this, use the switch in the bottom left corner of the page.
Page 68 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 49. Configuring LTE WAN connection. The expert settings mode. The IP and Miscellaneous sections.
Parameter Description
Connection name
Mode
A name for connection for easier identification.
The value of the field specifies the type of the network to which the router connects. Leave the auto value to let the router connect automatically to an available type of network, or select a needed value from the drop-down list.
For Huawei E367, Huawei E392, Huawei E3276 Megafon М1501),
Megafon М100-1 USB modems only .
Obtain DNS server addresses automatically
Primary DNS server/
Secondary DNS server
Vendor ID
Hostname
IP
Select the checkbox to configure automatic assignment of DNS server addresses. If the checkbox is selected, the Primary DNS server and Secondary DNS server fields are not displayed.
Enter addresses of the primary and secondary DNS servers in the relevant fields.
The identifier of your ISP. Optional
Miscellaneous
.
A name of the router specified by your ISP. Optional .
Page 69 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter
NAT
Firewall
Description
Select the checkbox if you want one WAN IP address to be used for all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS attacks.
Ping
Select the checkbox to allow the router to answer ping requests from the external network through this connection. For security reasons, it is recommended not to select this checkbox.
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Apply button to create the connection or the Back button to specify other settings.
After clicking the Apply button, the page for checking the Internet availability opens (see the
Checking Internet Availability section, page 71).
Page 70 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Checking Internet Availability
On the page, you can check the WAN connection you have created.
Configuring via Web-based Interface
Figure 50. Checking the Internet availability.
In the Result section, the status of the WAN connection and possible causes of malfunctions are displayed. To recheck the status of the WAN connection, enter the IP address or name of a host in the Address field or leave the value specified by default ( google.com
). Then click the
Recheck button.
Click the Back button to specify other settings.
Click the Next button to continue.
After clicking the Next button, the page for configuring wireless connection opens (see the
Configuring Wireless Connection section, page 72).
Page 71 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring Wireless Connection
Configuring via Web-based Interface
Figure 51. The page for selecting the operating mode for the wireless network .
If you are not going to use the wireless connection, select the Turn off choice of the Mode radio button. Click the Next button and then c lick the Apply button on the opened page. After clicking the Apply button, the quick settings page opens.
If you want to connect portable devices to the Internet via wireless connection, select the Access point choice of the Mode radio button. Click the Next button.
Page 72 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
On the opened page, in the SSID field, specify a new name for the network (use digits and Latin characters).
Figure 52. Page for changing the name of the wireless LAN .
Click the Next button to continue.
Page 73 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
On the next page, you can modify security settings of the WLAN.
!
The default security settings do not provide sufficient protection for the WLAN. Please, specify your own security settings for the WLAN.
Select the Protected value from the Network Authentication drop-down list and enter a key (a password that will be used to access your wireless network) in the Network key field. Use digits and Latin characters. After applying this setting, the WPA-PSK/WPA2-PSK mixed authentication type is specified for the router's WLAN.
When the Open value is selected, the Network key field is unavailable. After applying this setting, the Open authentication type with no encryption is specified for the router's WLAN.
Figure 53. Page for selecting a security mode for the wireless network.
Click the Next button to continue.
On the next page, the specified settings are displayed. Make sure that they are correct and then click the Apply button. After clicking the Apply button, the quick settings page opens.
Page 74 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Wireless Network Settings Wizard
To specify all needed settings for your wireless network, click the Wireless network settings wizard in the Wi-Fi section.
Figure 54. The page for selecting the operating mode for the wireless network .
If you are not going to use the wireless connection, select the Turn off choice of the Mode radio button. Click the Next button and then c lick the Apply button on the opened page. After clicking the Apply button, the quick settings page opens.
If you want to connect portable devices to the Internet via wireless connection, select the Access point choice of the Mode radio button. Click the Next button.
Page 75 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
On the opened page, in the SSID field, specify a new name for the network (use digits and Latin characters).
Figure 55. Page for changing the name of the wireless LAN .
Click the Next button to continue.
Page 76 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
On the next page, you can modify security settings of the WLAN.
!
The default security settings do not provide sufficient protection for the WLAN. Please, specify your own security settings for the WLAN.
Select the Protected value from the Network Authentication drop-down list and enter a key (a password that will be used to access your wireless network) in the Network key field. Use digits and Latin characters. After applying this setting, the WPA-PSK/WPA2-PSK mixed authentication type is specified for the router's WLAN.
When the Open value is selected, the Network key field is unavailable. After applying this setting, the Open authentication type with no encryption is specified for the router's WLAN.
Figure 56. Page for selecting a security mode for the wireless network.
Click the Next button to continue.
When all the steps of configuring the WLAN are completed, the specified settings are displayed on the page. Check their correctness and then click the Apply button. After clicking the Apply button, the quick settings page opens.
Page 77 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Virtual Server Settings Wizard
To create a virtual server for redirecting incoming Internet traffic to a specified IP address in the
LAN, click the Virtual server settings wizard link in the Firewall section.
Figure 57. The page for adding a virtual server.
On the opened page, you can specify the following parameters:
Parameter Description
Template
Name
Interface
Protocol
Public port (begin)/
Public port (end)
Select a virtual server template from the drop-down list, or select
Custom to specify all parameters of the new virtual server manually.
Enter a name for the virtual server for easier identification. You can specify any name.
Select a WAN connection to which this virtual server will be assigned.
A protocol that will be used by the new virtual server. Select a value from the drop-down list.
A port of the router from which traffic is directed to the IP address specified in the Private IP field. Specify the start and the end value for the port range. If you need to specify one port, enter the needed value in the Public port (begin) field and leave the Public port
(end) field blank.
Page 78 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter Description
Private port (begin)/
Private port (end)
Private IP
Enter the IP address of the server from the local area network. To choose a device connected to the router's LAN at the moment, select the relevant value from the drop-down list (the field will be filled in automatically).
Enter the IP address of the server from the local area network. To choose a device connected to the router's LAN at the moment, select the relevant value from the drop-down list (the field will be filled in automatically).
Remote IP Enter the IP address of the server from the external network.
When needed settings are configured, click the Apply button. After successful creation of the virtual server a notification appears. Click the OK button in the notification window, and then click the Back icon ( ) on the left side of the page to get back to the quick settings page.
Page 79 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Status
The pages of this section display data on the current state of the router:
• network statistics
• DSL connection status
• IP addresses leased by the DHCP server
• the routing table
• data on devices connected to the router's network and its web-based interface.
Network Statistics
On the Status / Network statistics page, you can view statistics for all connections existing in the system (WAN connections, LAN, WLAN). For each connection the following data are displayed: name and state (when the connection is on, its name is highlighted in green, when the connection is off, its name is highlighted in red), IP address and subnet mask, gateway (if the connection is established), MAC address, MTU value, and volume of data received and transmitted
(with increase of the volume the units of measurement are changed automatically: byte, Kbyte,
Mbyte, Gbyte).
Figure 58. The Status / Network statistics page.
Page 80 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
DSL Status
The information shown on the tabs of the Status / DSL status page can be used for troubleshooting and diagnosing connection problems.
Figure 59. The Status / DSL status page.
Page 81 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
DHCP
The Status / DHCP page displays the information on computers that have been identified by hostnames and MAC addresses and have got IP addresses from the DHCP server of the device, as well as the IP address expiration periods (the lease time).
Figure 60. The Status / DHCP page.
Page 82 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Routing Table
The Status / Routing table page displays the information on routes. The table contains destination IP addresses, gateways, subnet masks, and other data.
Figure 61. The Status / Routing table page.
Page 83 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Clients
On the Status / Clients page, you can view the list of devices connected to the router and devices accessing its web-based interface.
Figure 62. The Status / Clients page.
For each device the following data are displayed: the IP address, the MAC address, and the interface to which the device is connected.
Page 84 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Net
In this menu you can configure basic parameters of the router's local area network and configure connection to the Internet (a WAN connection).
WAN
On the Net / WAN page, you can create and edit connections used by the router.
Figure 63. The Net / WAN page.
To create a new connection, click the Add button. On the page displayed, specify the relevant values.
To edit an existing connection, left-click the relevant line in the table. On the page displayed, change the parameters and click the Apply button.
To delete an existing connection, left-click the relevant line in the table. On the page displayed, click the Delete button.
To use one of existing WAN connections as a default gateway, select the choice of the Default gateway radio button located in the line corresponding to this connection.
Page 85 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Creating ADSL WAN Connection
Configuring via Web-based Interface
Figure 64. The page for creating a new connection. The General settings and ATM sections.
Parameter Description
Provider
Connection Type
General settings
Leave the Manually value.
A type of network protocol to be used by the connection. Available values:
• PPPoE
• PPPoA
• IPoA
• Static IP
• Dynamic IP
• Bridge.
Interface
Name
A physical interface to which the new connection will be assigned.
Leave the DSL(new) value to create a new interface at the physical layer.
A name for connection for easier identification.
Page 86 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter
Enable
Direction
Description
Select the checkbox to enable the connection.
The direction of this connection.
ATM
VPI
VCI
Virtual Path Identifier. The valid range is from 0 to 250.
Virtual Circuit Identifier. The valid range is from 32 to 65535.
Encapsulation Mode Select LLC or VC from the drop-down list.
QoS A class of traffic for this connection.
UBR
( Unspecified Bit Rate ): The UBR service is used for applications that allow various delays and losses of packets. It is appropriate to use the UBR service for text/data/image transfer applications, as well as messaging, distribution, retrieval, and remote terminal applications.
UBR with PCR
( Unspecified Bit Rate with Peak Cell Rate ): The UBR service is used for applications that allow various delays and losses of packets.
The Peak Cell Rate is a determining factor in how often cells are sent in an effort to minimize lag or jitter caused by traffic inconsistencies. When you select this value from the drop-down list, the Peak Cell Rate field is displayed. Specify a required value (in cells per second).
CBR
( Constant Bit Rate ): This service is used for applications that require a constant data rate. It is mostly used for transferring uncompressed audio and video, e.g. videoconferencing, interactive audio (telephony), audio/video distribution (television, distance education, e-shops), and retrieval (video-on demand, audio libraries). When you select this value from the drop-down list, the
Peak Cell Rate field is displayed. Specify a required value (in cells per second).
Non Realtime VBR
( Non-Real-time Variable Bit Rate ): This service can be used for transferring data that have critical response-time requirements, e.g. air ticket booking, bank transactions, and process monitoring. When you select this value from the drop-down list, the Peak Cell Rate ,
Sustainable Cell Rate , and Maximum Burst Size fields are
Page 87 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Parameter
Configuring via Web-based Interface
Description displayed. Specify required values.
Realtime VBR
( Real-time Variable Bit Rate ): This service is used for delaysensitive applications such as real time video. The Rt-VBR provides higher network flexibility than the CBR service. When you select this value from the drop-down list, the Peak Cell Rate ,
Sustainable Cell Rate , and Maximum Burst Size fields are displayed. Specify required values.
Figure 65. The page for creating a new connection. The VLAN section.
The VLAN section is displayed for the PPPoE , Static IP , Dynamic IP , and Bridge connection types.
Parameter Description
Use VLAN
VLAN
Allow to create several connections assigned to this port
Select the checkbox to allow the router to use several untagged connections.
Select the checkbox to allow the router to use tagged VLAN connections.
Page 88 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter
VLAN ID
Description
An identifier for the VLAN. The field is displayed when the Use
VLAN checkbox is selected.
VLAN priority
A priority tag for the type of traffic transmitted. The field is displayed when the Use VLAN checkbox is selected.
The Miscellaneous section is displayed for all connection types except for Bridge .
Figure 66. The page for creating a new connection. The Miscellaneous section.
Parameter Description
Enable RIP
Miscellaneous
Select the checkbox to allow using RIP for this connection.
Enable IGMP Multicast
NAT
Firewall
Ping
Select the checkbox to allow multicast traffic from the external network (e.g. video streaming) to be received.
Select the checkbox if you want one WAN IP address to be used for all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS attacks.
Select the checkbox to allow the router to answer ping requests from the external network through this connection. For security reasons, it is recommended not to select this checkbox.
Page 89 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
The PPP section is displayed for the PPPoE and PPPoA connection types.
Figure 67. The page for creating a new connection. The PPP section.
Parameter Description
Username
PPP
A username (login) to access the Internet.
Without authorization
Service name
Select the checkbox if you don't need to enter a username and password to access the Internet.
Password A password to access the Internet.
Password confirmation The confirmation of the entered password (to avoid mistypes).
Displayed for the PPPoE type only.
The name of the PPPoE authentication server.
Authentication algorithm
MTU
Keep Alive
Select a required authentication method from the drop-down list or leave the AUTO value.
The maximum size of units transmitted by the interface.
Select the checkbox if you want the router to keep you connected to your ISP even when the connection has been inactive for a specified period of time. When the checkbox is selected, the LCP interval and LCP fails fields are available. Specify the required values.
Page 90 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter
Dial on demand
Description
Select the checkbox if you want the router to establish connection to the Internet on demand. In the Maximum idle time field, specify a period of inactivity (in seconds) after which the connection should be terminated.
PPP IP extension
Static IP Address
This option is used by some ISPs. Contact your ISP to clarify if this checkbox needs to be enabled.
Fill in the field if you want to use a static IP address to access the
Internet.
PPP debug
Select the checkbox if you want to log all data on PPP connection debugging.
The IP section is displayed for the Static IP , Dynamic IP and IPoA connection types.
Figure 68. The page for creating a new connection. The IP section.
Page 91 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter
IP Address
Netmask
Description
IP
Displayed for the Static IP and IPoA types only.
Enter an IP address for this WAN connection.
Displayed for the Static IP and IPoA types only.
Enter a subnet mask for this WAN connection.
Gateway IP address
Obtain DNS server addresses automatically
Displayed for the Static IP and IPoA types only.
Enter an IP address of the gateway used by this WAN connection.
Displayed for the Dynamic IP type only.
Select the checkbox to configure automatic assignment of DNS server addresses. If the checkbox is selected, the Primary DNS server and Secondary DNS server fields are not displayed.
Primary DNS server/
Secondary DNS server
Enter addresses of the primary and secondary DNS servers in the relevant fields.
Vendor ID
Displayed for the Dynamic IP type only.
The identifier of your ISP. Optional .
Hostname
Displayed for the Dynamic IP type only.
A name of the router specified by your ISP. Optional.
When all needed settings are configured, click the Apply button.
Page 92 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Creating Ethernet WAN Connection
Prior to creating an Ethernet WAN connection, specify a LAN port that will be used as the WAN port (see the EtherWAN section, page 127).
Figure 69. The page for creating a new connection. The General settings , Ethernet , and VLAN sections.
Parameter Description
Provider
General settings
Leave the Manually value.
Connection Type
Interface
Name
Enable
A type of network protocol to be used by the connection. Available values:
• PPPoE
• Static IP
• Dynamic IP
• Bridge .
Select the value corresponding to the LAN port specified as the
WAN port.
A name for connection for easier identification.
Select the checkbox to enable the connection.
Page 93 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter
Direction
MTU
Description
The direction of this connection.
Ethernet
The maximum size of units transmitted by the interface.
A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding. In the field, enter the MAC address registered by your ISP upon concluding the agreement.
MAC
You can click the Clone MAC Address button ( ) to set the
MAC address of the network interface card (of the computer that is being used to configure the router at the moment) as the MAC address of the WAN interface.
Also you can set the address of a device connected to the router's
LAN at the moment. To do this, select the relevant value from the drop-down list (the field will be filled in automatically).
VLAN
Allow to create several connections assigned to this port
If the checkbox is selected, the router is able to use several untagged connections.
Use VLAN
VLAN ID
VLAN priority
If the checkbox selected, the router is able to use tagged VLAN connections.
An identifier for the VLAN. The field is displayed when the Use
VLAN checkbox is selected.
A priority tag for the type of traffic transmitted. The field is displayed when the Use VLAN checkbox is selected.
Page 94 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
The Miscellaneous section is displayed for all connection types except for Bridge .
Figure 70. The page for creating a new connection. The Miscellaneous section.
Parameter Description
Enable RIP
Miscellaneous
Select the checkbox to allow using RIP for this connection.
Enable IGMP Multicast
NAT
Firewall
Ping
Select the checkbox to allow multicast traffic from the external network (e.g. video streaming) to be received.
Select the checkbox if you want one WAN IP address to be used for all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS attacks.
Select the checkbox to allow the router to answer ping requests from the external network through this connection. For security reasons, it is recommended not to select this checkbox.
Page 95 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
The PPP section is displayed for the PPPoE connection type.
Configuring via Web-based Interface
Figure 71. The page for creating a new connection. The PPP section.
Parameter Description
Username
PPP
A username (login) to access the Internet.
Without authorization
Password A password to access the Internet.
Password confirmation The confirmation of the entered password (to avoid mistypes).
Service name
Select the checkbox if you don't need to enter a username and password to access the Internet.
Authentication algorithm
The name of the PPPoE authentication server.
Select a required authentication method from the drop-down list or leave the AUTO value.
MTU
Keep Alive
The maximum size of units transmitted by the interface.
Select the checkbox if you want the router to keep you connected to your ISP even when the connection has been inactive for a specified period of time. When the checkbox is selected, the LCP interval and LCP fails fields are available. Specify the required values.
Page 96 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter
Dial on demand
Description
Select the checkbox if you want the router to establish connection to the Internet on demand. In the Maximum idle time field, specify a period of inactivity (in seconds) after which the connection should be terminated.
PPP IP extension
Static IP Address
This option is used by some ISPs. Contact your ISP to clarify if this checkbox needs to be enabled.
Fill in the field if you want to use a static IP address to access the
Internet.
PPP debug
Select the checkbox if you want to log all data on PPP connection debugging.
The IP section is displayed for the Static IP and Dynamic IP connection types.
Figure 72. The page for creating a new connection. The IP section.
Page 97 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter
IP Address
Netmask
Gateway IP address
Obtain DNS server addresses automatically
Description
IP
Displayed for the Static IP type only.
Enter an IP address for this WAN connection.
Displayed for the Static IP type only.
Enter a subnet mask for this WAN connection.
Displayed for the Static IP type only.
Enter an IP address of the gateway used by this WAN connection.
Displayed for the Dynamic IP type only.
Select the checkbox to configure automatic assignment of DNS server addresses. If the checkbox is selected, the Primary DNS server and Secondary DNS server fields are not displayed.
Primary DNS server/
Secondary DNS server
Enter addresses of the primary and secondary DNS servers in the relevant fields.
Vendor ID
Displayed for the Dynamic IP type only.
The identifier of your ISP. Optional .
Hostname
Displayed for the Dynamic IP type only.
A name of the router specified by your ISP. Optional .
When all needed settings are configured, click the Apply button.
Page 98 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Creating 3G WAN Connection
If the PIN code check is enabled for the SIM card inserted into your USB modem, then prior to creating a 3G WAN connection, proceed to the 3G modem menu and enter the PIN code on the page displayed (see the 3G Modem section, page 146). Then proceed to the Net / WAN page, click the Add button, and select the 3G value from the Connection Type drop-down list.
Figure 73. The page for creating a new connection. The General settings and 3G modem sections.
Parameter Description
General settings
Provider
Interface
Name
Enable
Direction
To automatically specify all settings required to connect to the
Internet, select your country and operator from the drop-down list.
To specify all settings independently, leave the Manually value.
Select the USB value.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
3G modem
Page 99 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Parameter
Mode
Configuring via Web-based Interface
Description
The value of the field specifies the type of the network to which the router connects. Leave the auto value to let the router connect automatically to an available type of network, or select a needed value from the drop-down list. For GSM USB modems only .
Figure 74. The page for creating a new connection. The PPP and Miscellaneous sections.
Parameter Description
Username
PPP
A username (login) to connect to the network of the operator.
Without authorization Select the checkbox if your operator does not require authorization.
Password A password to connect to the network of the operator.
Password confirmation The confirmation of the entered password (to avoid mistypes).
APN
Dial number
An access point name.
A number dialed to connect to the authorization server of the operator.
Authentication algorithm
MTU
Select a required authentication method from the drop-down list or leave the AUTO value.
The maximum size of units transmitted by the interface. Optional .
Page 100 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter
Keep Alive
Extra options
Dial on demand
Description
Select the checkbox if you want the router to keep you connected to the network of your operator even when the connection has been inactive for a specified period of time. When the checkbox is selected, the LCP interval and LCP fails fields are available.
Specify the required values.
In the field, you can specify additional data for encryption or authentication. Optional .
Select the checkbox if you want the router to establish connection to the Internet on demand. In the Maximum idle time field, specify a period of inactivity (in seconds) after which the connection should be terminated.
PPP debug
NAT
Select the checkbox if you want to log all data on PPP connection debugging.
Miscellaneous
Select the checkbox if you want one WAN IP address to be used for all computers of your LAN.
Firewall
Select the checkbox to enable protection against ARP and DDoS attacks.
Ping
Select the checkbox to allow the router to answer ping requests from the external network through this connection. For security reasons, it is recommended not to select this checkbox.
When all needed settings are configured, click the Apply button.
Page 101 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Creating LTE WAN Connection
Configuring via Web-based Interface
Figure 75. The page for creating a new connection. The General settings and 3G modem sections.
Parameter Description
Provider
Interface
Name
Enable
Direction
General settings
Leave the Manually value.
Select the USB value.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Mode
3G modem
The value of the field specifies the type of the network to which the router connects. Leave the auto value to let the router connect automatically to an available type of network, or select a needed value from the drop-down list.
For Huawei E367, Huawei E392, Huawei E3276 Megafon М1501),
Megafon М100-1 USB modems only .
Page 102 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 76. The page for creating a new connection. The IP and Miscellaneous sections.
Parameter Description
Obtain DNS server addresses automatically
Primary DNS server/
Secondary DNS server
IP
Select the checkbox to configure automatic assignment of DNS server addresses. If the checkbox is selected, the Primary DNS server and Secondary DNS server fields are not displayed.
Enter addresses of the primary and secondary DNS servers in the relevant fields.
Vendor ID
Hostname
NAT
The identifier of your ISP. Optional .
A name of the router specified by your ISP. Optional .
Miscellaneous
Select the checkbox if you want one WAN IP address to be used for all computers of your LAN.
Firewall
Select the checkbox to enable protection against ARP and DDoS attacks.
Ping
Select the checkbox to allow the router to answer ping requests from the external network through this connection. For security reasons, it is recommended not to select this checkbox.
When all needed settings are configured, click the Apply button.
Page 103 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
LAN
To configure the router's local interface, proceed to the Net / LAN page.
Figure 77. Basic settings of the local interface.
If needed, edit the basic parameters of the local interface.
Parameter Description
IP Address
The IP address of the router in the local subnet. By default, the following value is specified: 192.168.1.1
.
Netmask
The mask of the local subnet. By default, the following value is specified: 255.255.255.0
.
When needed settings are configured, click the Apply button.
In the DHCP server section, you can configure the built-in DHCP server of the router.
Parameter
Mode
Figure 78. The section for configuring the DHCP server.
Description
An operating mode of the router's DHCP server.
Enable : the router assigns IP addresses to clients automatically in accordance with the specified parameters. When this value is selected, the DNS Relay , Start IP , End IP , and the Lease time fields are displayed on the page.
Disable : the router's DHCP server is disabled, clients' IP addresses are assigned manually.
Relay : an external DHCP server is used to assign IP addresses to clients. When this value is selected, the External DHCP server IP field is displayed on the page.
Page 104 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter Description
DNS Relay
Select the checkbox so that the devices connected to the router obtain the address of the router as the DNS server address.
Deselect the checkbox so that the devices connected to the router obtain the address transmitted by the ISP or specified on the
Advanced / DNS page as the DNS server address.
Start IP
End IP
The start IP address of the address pool used by the DHCP server to distribute IP addresses to clients.
The end IP address of the address pool used by the DHCP server to distribute IP addresses to clients.
Lease time
The lifetime of IP addresses leased by the DHCP server. At the end of this period the leased IP address is revoked and can be distributed to another device, unless the previous device has confirmed the need to keep the address.
External DHCP server IP
The IP address of the external DHCP server which assigns IP addresses to the router's clients.
When all needed settings are configured, click the Apply button.
In the Static DHCP section, you can specify MAC address and IP address pairs (set a fixed IP address in the local area network for a device with a certain MAC address). The router assigns IP addresses in accordance with the specified pairs only when the DHCP server is enabled (in the
DHCP server section, in the Mode drop-down list, the Enable value is selected).
Figure 79. The section for creating MAC-IP pairs.
To create a MAC-IP pair, click the Add button. In the IP field, enter an IP address which will be assigned to the device from the LAN, then in the MAC field, enter the MAC address of this device.
In the Host field, specify a network name of the device for easier identification ( optional ).
Also you can create a MAC-IP pair for a device connected to the router's LAN at the moment. To do this, select the relevant value from the Known IP/MAC addresses drop-down list (the IP and MAC fields will be filled in automatically).
When all needed MAC-IP pairs are specified, click the Apply button.
Existing MAC-IP pairs are displayed in the table of the Static DHCP section. To remove a pair, select the checkbox in the relevant line in the table and click the Remove button. Then click the
Apply button.
Page 105 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Wi-Fi
In this menu you can specify all needed settings for your wireless network.
Basic Settings
On the Wi-Fi / Basic settings page, you can enable your wireless local area network (WLAN) and configure its basic parameters.
Figure 80. Basic settings of the wireless LAN.
Page 106 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter Description
Enable Wireless
BSSID
Hide Access Point
SSID
The checkbox enables Wi-Fi connections. If you want to disable your WLAN, deselect the checkbox.
The parameter that uniquely identifies your wireless network. You cannot change the value of this parameter.
If the checkbox is selected, other users cannot see your Wi-Fi network. (It is recommended not to select this checkbox in order to simplify initial configuration of your WLAN.)
A name for the WLAN. By default, the value DSL-2750U is specified. It is recommended to specify another name for the network upon initial configuration (use digits and Latin characters).
The country you are in. Select a value from the drop-down list.
Country
Channel
Wireless mode
The wireless channel number. When the auto value is selected, the router itself chooses the channel with the least interference.
Operating mode of the wireless network of the router. This parameter defines standards of the devices that will be able to use your wireless network. Select a value from the drop-down list.
Max Associated Clients
The maximum number of devices connected to the wireless network of the router. When the value 0 is specified, the device does not limit the number of connected clients.
When you have configured the parameters, click the Apply button.
Page 107 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Security Settings
On the Wi-Fi / Security settings page, you can modify security settings of the WLAN.
Figure 81. The default security settings.
By default, the Open network authentication type with no encryption is specified for the WLAN.
!
The default security settings do not provide sufficient protection for the WLAN. Please, specify your own security settings for the WLAN.
Page 108 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
The router supports the following authentication types:
Authentication type
Open
Shared
WPA-PSK
Description
Open authentication (with WEP encryption for wireless network modes not supporting 802.11n devices).
Shared key authentication with WEP encryption . This authentication type is not available when on the Wi-Fi / Basic settings page, in the Wireless mode drop-down list, a mode supporting 802.11n devices is selected.
WPA-based authentication using a PSK.
WPA2-PSK
WPA-PSK/WPA2-PSK mixed
WPA2-based authentication using a PSK.
A mixed type of authentication. When this value is selected, devices using the WPA-PSK authentication type and devices using the
WPA2-PSK authentication type can connect to the WLAN of the router.
Page 109 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
When the Open or Shared value is selected, the WEP Encryption settings section is displayed
(the section is unavailable for the wireless network operating modes which support the standard
802.11n):
Figure 82. The Open value is selected from the Network Authentication drop-down list.
Parameter Description
Enable Encryption WEP
The checkbox activating WEP encryption. When the checkbox is selected, the Default Key ID field, the Encryption Key WEP as
HEX checkbox, the WEP key length drop-down list, and four
Encryption Key WEP fields are displayed on the page. For the
Shared authentication type the checkbox is always selected.
Default Key ID
Encryption Key WEP as HEX
The number of the key (from first to fourth) which will be used for
WEP encryption.
Select the checkbox to set a hexadecimal number as a key for encryption.
WEP key length
The length of WEP encryption key.
Select the value 64bit to specify keys containing 5 ASCII symbols or 10 HEX symbols.
Select the value 128bit to specify keys containing 13 ASCII symbols or 26 HEX symbols.
Page 110 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter Description
Encryption Key WEP (1-
4)
Keys for WEP encryption. The router uses the key selected from the
Default Key ID drop-down list. It is required to specify all the fields.
When the WPA-PSK , WPA2-PSK , or WPA-PSK/WPA2-PSK mixed value is selected, the
WPA Encryption settings section is displayed:
Figure 83. The WPA2-PSK value is selected from the Network Authentication drop-down list.
Parameter
Encryption Key PSK
WPA2 Preauthentication
Description
A key for WPA encryption. The key can contain digits and/or Latin characters.
The checkbox activating preliminary authentication (displayed only for the WPA2-PSK and WPA-PSK/WPA2-PSK mixed authentication types).
WPA Encryption An encryption method: TKIP , AES , or TKIP+AES .
WPA renewal
The time period (in seconds), at the end of which a new key for
WPA encryption is generated. When the value 0 is specified for this field, the key is not renewed.
When you have configured the parameters, click the Apply button.
Page 111 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
MAC Filter
On the Wi-Fi / MAC Filter page, you can define a set of MAC addresses of devices which will be allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to access the WLAN.
Figure 84. The MAC filter for the wireless network.
By default, MAC filtering is not active (the Disabled value is selected from the MAC filter restrict mode drop-down list on the Filter mode tab).
To open your wireless network for the devices which MAC addresses are specified on the MAC addresses tab and to close the wireless network for all other devices, select the Allow value from the MAC filter restrict mode drop-down list and click the Apply button.
To close your wireless network for the devices which MAC addresses are specified on the MAC addresses tab, select the Deny value from the MAC filter restrict mode drop-down list and click the Apply button.
To add a MAC address to which the selected filtering mode will be applied, proceed to the MAC addresses tab.
Page 112 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 85. The tab for adding a MAC address.
Click the Add button and enter an address in the field displayed. Also you can enter the MAC address of a device connected to the router's LAN at the moment. To do this, select the relevant device from the Known IP/MAC addresses drop-down list (the field will be filled in automatically). Then click the Apply button.
To remove a MAC address from the list of MAC addresses, select the checkbox located to the left of the relevant MAC address and click the Apply button.
Page 113 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Station List
On the Wi-Fi / Station List page, you can view the list of wireless clients connected to the router.
Figure 86. The list of the wireless clients.
If you want to disconnect a wireless device from your WLAN, select the checkbox in the line containing the relevant MAC address, and click the Disconnect button.
To view the latest data on the devices connected to the WLAN, click the Refresh button.
Page 114 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
WPS
On the Wi-Fi / WPS page, you can enable the function for secure configuration of the WLAN and select a method used to easily add wireless devices to the WLAN.
The WPS function helps to configure the protected wireless network automatically. Devices connecting to the wireless network via the WPS function must support the WPS function.
!
Before using the function you need to configure one of the following authentication types:
Open with no encryption, WPA2-PSK or with the encryption method (on the Wi-Fi / Security settings page). When other security settings are specified, controls of the Wi-Fi / WPS page are not available.
Figure 87. The page for configuring the WPS function.
Page 115 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
To activate the WPS function, select the WPS Enable checkbox and click the Apply button. When the checkbox is selected, the Information and Connection sections are available on the page.
Parameter Description
Default PIN code
WPS Status
SSID
The PIN code of the router. This parameter is used when connecting the router to a registrar to set the parameters of the WPS function.
The state of the WPS function:
• Configured (all needed settings are specified; these settings will be used upon establishing the wireless connection)
• Unconfigured (after activating the WPS function, needed settings will be configured automatically: the MAC address of the wireless interface will be added to the SSID, the network authentication type will be changed to WPA2-PSK with a random encryption key).
The name of the router's WLAN.
Network Authentication The network authentication type specified for the WLAN.
Encryption The encryption type specified for the WLAN.
Encryption key
Refresh
The encryption key specified for the WLAN.
Click the button to refresh the data on the page.
Factory PIN Click the button to restore the factory PIN code of the router.
Reset to unconfigured Click the button to reset the parameters of the WPS function.
WPS Method
PIN Code
Connect
A method of the WPS function. Select a value from the drop-down list.
PIN : Connecting the device via the PIN code.
PBC : Connecting the device via the push button (actual or virtual).
The PIN code of the WPS-enabled device that needs to be connected to the wireless network of the router.
The field is displayed only when the PIN value is selected from the
WPS Method drop-down list.
Click the button to connect the wireless device to the router's WLAN via the WPS function.
Page 116 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Using WPS Function via Web-based Interface
To add a wireless device via the PIN method of the WPS function, follow the next steps:
1. Select the WPS Enable checkbox.
2. Click the Apply button.
3. Select the PIN value from the WPS Method drop-down list.
4. Select the PIN method in the software of the wireless device that you want to connect to the router's WLAN.
5. Click the relevant button in the software of the wireless device that you want to connect to the WLAN.
6. Right after that, enter the PIN code specified on the cover of the wireless device or in its software in the PIN Code field.
7. Click the Connect button in the web-based interface of the router.
To add a wireless device via the PBC method of the WPS function, follow the next steps:
1. Select the WPS Enable checkbox.
2. Click the Apply button.
3. Select the PBC value from the WPS Method drop-down list.
4. Select the PBC method in the software of the wireless device that you want to connect to the router's WLAN.
5. Click the relevant button in the software or press the WPS button on the cover of the wireless device that you want to connect to the WLAN.
6. Click the Connect button in the web-based interface of the router.
Using WPS Function without Web-based Interface
You can add a wireless device to the router's WLAN without accessing the web-based interface of the router. To do this, you need to configure the following router's settings:
1. Specify corresponding security settings for the wireless network of the router.
2. Select the WPS Enable checkbox.
3. Click the Apply button.
4. Save the settings and close the web-based interface (click the Save line in the top-page menu displayed when the mouse pointer is over the System caption, then click the Logout line).
Page 117 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Later you will be able to add wireless devices to the WLAN by pressing the WPS/WLAN button of the router.
1. Select the PBC method in the software of the wireless device that you want to connect to the router's WLAN.
2. Click the relevant button in the software or press the WPS button on the cover of the wireless device that you want to connect to the WLAN.
3. Press the WPS/WLAN button of the router and release it.
Page 118 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Additional Settings
On the Wi-Fi / Additional settings page, you can define additional parameters for the router's
WLAN.
!
Changing parameters presented on this page may negatively affect your WLAN!
Figure 88. Additional settings of the WLAN.
Page 119 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
The following fields are available on the page:
Parameter
Beacon Period
RTS Threshold
Frag Threshold
DTIM Period
Description
The time interval (in milliseconds) between packets sent to synchronize the wireless network.
The minimum size (in bites) of a packet for which an RTS frame is transmitted.
The maximum size (in bites) of a non-fragmented packet. Larger packets are fragmented (divided).
The time period (in seconds) between sending a DTIM (a message notifying on broadcast or multicast transmission) and data transmission.
TX Power The router's transmit power (in percentage terms).
Bandwidth
The channel bandwidth for 802.11n devices.
20MHz : 802.11n devices operate at 20MHz channels.
40MHz : 802.11n devices operate at 40MHz channels.
20/40MHz : 802.11n devices operate at 20MHz and 40MHz channels
(the channel is combined with the previous adjacent channel).
20/40MHz + : 802.11n devices operate at 20MHz and 40MHz channels
(the channel is combined with the next adjacent channel).
Guard interval (in nanoseconds). This parameter defines the interval between symbols transmitted when the router is communicating to wireless devices.
Short GI
Enable : the router uses the 400 ns short guard interval. For the wireless network operating modes which support 802.11n standard only (see the value of the Wireless mode drop-down list on the Wi-Fi / Basic settings page).
Disable : the router uses the 800 ns standard guard interval.
When you have configured the parameters, click the Apply button.
Page 120 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Advanced
In this menu you can configure advanced settings of the router:
• enable the UPnP function
• define interface groups
• allow the router to connect to a private Ethernet line
• configure a DDNS service
• add name servers
• define static routes
• edit the ADSL connection parameters
• create rules for remote access to the web-based interface
• allow the router to use SIP, RTSP, and enable the PPPoE pass through function.
Page 121 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
UPnP
On the Advanced / UPnP page, you can enable and disable the UPnP function.
UPnP is a set of networking protocols designed for automatic configuration of network devices. The
UPnP function in the router allows using the UPnP IGD protocol for automatic configuration of the device's parameters for network applications requiring an incoming connection to the router.
Figure 89. The Advanced / UPnP page.
If you want to manually specify all parameters needed for network applications, deselect the
Enabled checkbox and click the Apply button.
If you want to enable the UPnP function in the router, select the Enabled checkbox and click the
Apply button.
After activating the UPnP function the router's parameters configured automatically via the UPnP
IGD protocol are displayed on the page:
Parameter Description
Protocol
IP
Private port
Public port
A protocol for network packet transmission.
The IP address of a client from the local area network.
A port of a client's IP address to which traffic is directed from a public port of the router.
A public port of the router from which traffic is directed to a client's
IP address.
Page 122 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Parameter
Comments
Configuring via Web-based Interface
Description
Information transmitted by a client's network application.
Page 123 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Interface Grouping
On the Advanced / Interface grouping page, you can assign WAN connections to the router's ports (create groups of interfaces), which allows distinguishing different types of traffic. This function is mostly used in Triple-play networks.
Figure 90. The Advanced / Interface grouping page.
To create a new rule for interface grouping (a group of ports), click the Add button.
Page 124 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 91. The page for adding a new group of ports.
You can specify the following parameters:
Parameter Description
Name
Type of group
A name for the group for easier identification. You can specify any name.
The type of the group.
NAT . The group of this type is an external connection with address translation. It is mostly used to connect to the Internet. You can assign any WAN connection except for the Bridge WAN connection to the group of this type.
Transparent bridge . The group of this type is a transparent connection between an internal port and an external connection. It is mostly used to connect IPTV set-top boxes. You can assign only the
Bridge WAN connection to the group of this type.
Local . The group of this type is a channel used to connect local clients to the router. It is mostly used to connect different types of clients, which require separate connection settings. You cannot assign WAN connections to the group of this type.
Page 125 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter Description
Ports
In this section the LAN ports of the router are displayed. Ports which cannot be added to the group are highlighted in red.
To add a port to the group, click the icon corresponding to this port.
Ports added to the group are highlighted in green.
To remove a port from the group, click the icon corresponding to this port.
WAN connections
In this section WAN connections of the router are displayed.
Connections which cannot be added to the group are highlighted in red.
To add a connection to the group, click the icon corresponding to this connection. The connection added to the group is highlighted in green.
To remove a connection from the group, click the icon corresponding to this connection.
Click the Apply button.
To edit or remove an existing group, select the relevant group on the Advanced / Interface grouping page. On the page displayed, change the parameters and click the Apply button, or click the Delete button. When you delete a group, interfaces assigned to it are reassigned to the
DEFAULT group.
Page 126 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
EtherWAN
On the Advanced / EtherWAN page, you can configure the router to connect to a private Ethernet line.
!
The Ethernet WAN function allows using any Ethernet port of the router to access the
Internet via Ethernet technology. When the function is enabled, the router is still able to access the Internet via ADSL technology.
Figure 92. The Advanced / EtherWAN page.
To use one of the router's LAN port as the WAN port, click the icon corresponding to this port and click the Enter button. Port configured as the WAN port is highlighted in green.
If in the future you need to disconnect the LAN port from the private Ethernet line, click the icon highlighted in green and click the Enter button.
Page 127 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
DDNS
On the Advanced / DDNS page, you can define parameters of the DDNS service, which allows associating a domain name with dynamic IP addresses.
Figure 93. The Advanced / DDNS page.
To add a new DDNS service, click the Add button. In the line displayed, you can specify the following parameters:
Parameter Description
Host name
User name
The domain name registered at your DDNS provider.
The username to authorize for your DDNS provider.
User password The password to authorize for your DDNS provider.
Update period
An interval (in minutes) between sending data on the router's external IP address to the relevant DDNS service.
After specifying the needed parameters, click the Apply button.
To edit parameters of the existing DDNS service, select a needed field in the relevant line of the table, change its value, and click the Apply button.
To remove an existing DDNS service, select the checkbox located to the left of the relevant line in the table and click the Apply button.
Page 128 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
DNS
On the Advanced / DNS page, you can add DNS servers to the system.
Figure 94. The Advanced / DNS page.
DNS servers are used to determine the IP address from the name of a server in Intranets or the
Internet (as a rule, they are specified by an ISP or assigned by a network administrator).
The device performs the DNS relay function, i.e., it redirects the DNS requests of users to external
DNS servers. You can specify the addresses of DNS servers manually on this page, or configure the router to obtain DNS servers addresses automatically from your ISP upon installing a connection.
!
When you use the built-in DHCP server, the network parameters (including DNS servers) are distributed to clients automatically.
If you want to configure automatic obtainment of DNS servers addresses, deselect the Manual checkbox, select a WAN connection which will be used to obtain addresses of DNS servers automatically from the Interface drop-down list or select the Default route checkbox, so that the router could use the connection set as the default gateway (on the Net / WAN page) to obtain DNS server addresses, and click the Apply button.
If you want to specify the DNS server manually, select the Manual checkbox and enter a DNS server address in the Name servers list. To specify several addresses, press the Enter key and enter a needed address in the next line. Then click the Apply button.
To remove a DNS server from the system, remove the relevant line from the Name servers field and click the Apply button.
Page 129 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Routing
On the Advanced / Routing page, you can add static routes (routes for networks that are not connected directly to the device but are available through the interfaces of the device) into the system.
Figure 95. The Advanced / Routing page.
To create a new route, click the Add button. In the line displayed, you can specify the following parameters:
Parameter Description
Destination network A destination network to which this route is assigned.
Destination netmask The destination network mask.
Gateway
An IP address through which the destination network can be accessed. The field is available when the <Auto> value is selected from the Via Interface drop-down list of this line.
Metric
A metric for the route. The lower the value, the higher is the route priority. Optional .
Via Interface
Select an interface (connection) through which the destination network can be accessed from the drop-down list. If you have selected the <Auto> value of this drop-down list, the router itself sets the interface on the basis of data on connected networks.
After specifying the needed parameters, click the Apply button.
Page 130 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
To edit an existing route, select a needed field in the relevant line of the table, change its value, and click the Apply button.
To remove an existing route, select the checkbox located to the left of the relevant line in the table and click the Apply button.
If you need to specify a host from the LAN as the default route, select the <Auto> value from the
Via Interface drop-down list, enter 0.0.0.0
in the Destination network and Destination netmask fields, enter the IP address of the host from the LAN in the Gateway field, and then click the Apply button.
Page 131 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
ADSL
The Advanced / ADSL page includes the set of ADSL standards that should be defined by an ISP.
Contact your ISP to set proper parameters. Select the relevant options and click the Apply button.
Figure 96. The Advanced / ADSL page.
Page 132 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Remote Access
On the Advanced / Remote access page, you can configure remote access to the web-based interface of the router. By default, the access from external networks to the router is closed. If you need to allow access to the router from the external network, create relevant rules.
Figure 97. The Advanced / Remote access page.
To create a new rule, click the Add button. In the line displayed, you can specify the following parameters:
Parameter
Name
Interface
Description
A name for the rule for easier identification. You can specify any name.
A connection through which the web-based interface of the router is accessed.
IP address A host or a subnet to which the rule is applied.
Mask
Public port
The mask of the subnet.
An external port of the router. You can specify only one port. The field is available when the HTTP value is selected from the
Protocol drop-down list.
Protocol The protocol available for remote management of the router.
After specifying the needed parameters, click the Apply button.
Page 133 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
To edit a rule for remote access, select a needed field in the relevant line of the table, change its value, and click the Apply button.
To remove a rule for remote access, select the checkbox located to the left of the relevant line in the table and click the Apply button.
Page 134 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Miscellaneous
On the Advanced / Miscellaneous page, you can enable SIP, RTSP, and the PPPoE pass through function for the router.
SIP is used for creating, modifying, and terminating communication sessions. This protocol allows telephone calls via the Internet.
RTSP is used for real-time streaming multimedia data delivery. This protocol allows some applications to receive streaming audio/video from the Internet.
The PPPoE pass through function allows PPPoE clients of computers from your LAN to connect to the Internet through PPPoE connections of the router.
Figure 98. The Advanced / Miscellaneous page.
To enable SIP, select the SIP checkbox and click the Apply button. Such a setting allows using the
SIP ALG function. This function allows VoIP traffic to pass through the NAT-enabled router.
5
To disable the SIP ALG function, deselect the SIP checkbox and click the Apply button.
To enable RTSP, select the RTSP checkbox and click the Apply button. Such a setting allows managing media stream: fast forward streaming audio/video, pause and start it.
To disable RTSP, deselect the RTSP checkbox and click the Apply button.
5 On the Net / WAN page, create a WAN connection, on the Advanced / Miscellaneous page, select the SIP checkbox, connect the phone cable between a LAN port of the router and the IP phone. Specify SIP parameters on the IP phone and configure it to obtain an IP address automatically (as DHCP client).
Page 135 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
To enable the PPPoE pass through function, select the PPPoE pass through checkbox and click the Apply button.
To disable the PPPoE pass through function, deselect the PPPoE pass through checkbox and click the Apply button.
Page 136 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Firewall
In this menu you can configure the firewall of the router:
• add rules for IP filtering
• create virtual servers
• define a DMZ
• configure the MAC filter.
IP Filters
On the Firewall / IP filters page, you can create new rules for filtering IP packets and edit or remove existing rules.
Figure 99. The Firewall / IP filters page.
To create a new rule, click the Add button.
Page 137 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 100. The page for adding a rule for IP filtering.
You can specify the following parameters:
Parameter Description
Name
Protocol
Action
General
A name for the rule for easier identification.
A protocol for network packet transmission. Select a value from the drop-down list.
Select an action for the rule.
ACCEPT : Allows packet transmission in accordance with the criteria specified by the rule.
DROP : Denies packet transmission in accordance with the criteria specified by the rule.
IP Addresses
Page 138 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter
Source IP address
Description
The source host/subnet IP address.
To choose a device connected to the router's LAN at the moment, select the relevant IP address from the drop-down list (the field will be filled in automatically).
If you want to specify a range of IP addresses, click the Range icon
Destination IP address
( ) and enter the starting and ending addresses in the left and right fields correspondingly.
The destination host/subnet IP address.
To choose a device connected to the router's LAN at the moment, select the relevant IP address from the drop-down list (the field will be filled in automatically).
If you want to specify a range of IP addresses, click the Range icon
( ) and enter the starting and ending addresses in the left and right fields correspondingly.
Ports
Source port
A port of the source IP address. You can specify one port, several ports separated by a comma, or a range of ports separated by a colon.
Destination port
A port of the destination IP address. You can specify one port, several ports separated by a comma, or a range of ports separated by a colon.
Click the Apply button.
To edit a rule for IP filtering, click the link to the relevant rule. On the opened page, change the needed parameters and click the Apply button.
To remove a rule for IP filtering, click the link to the relevant rule. On the opened page, click the
Delete button.
To remove all rules from this page, click the Clear all button (the button is displayed if at least one rule exists).
Page 139 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Virtual Servers
On the Firewall / Virtual servers page, you can create virtual servers for redirecting incoming
Internet traffic to a specified IP address in the local area network.
Figure 101. The Firewall / Virtual servers page.
To create a new virtual server, click the Add button.
Page 140 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 102. The page for adding a virtual server.
You can specify the following parameters:
Parameter Description
Template
Name
Interface
Protocol
Public port (begin)/
Public port (end)
Private port (begin)/
Private port (end)
Select a virtual server template from the drop-down list, or select
Custom to specify all parameters of the new virtual server manually.
A name for the virtual server for easier identification. You can specify any name.
A WAN connection to which this virtual server will be assigned.
A protocol that will be used by the new virtual server. Select a value from the drop-down list.
A port of the router from which traffic is directed to the IP address specified in the Private IP field. Specify the start and the end value for the port range. If you need to specify one port, enter the needed value in the Public port (begin) field and leave the Public port
(end) field blank.
A port of the IP address specified in the Private IP field to which traffic is directed from the Public port . Specify the start and the end value for the port range. If you need to specify one port, enter the needed value in the Private port (begin) field and leave the
Private port (end) field blank.
Page 141 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter Description
Private IP
The IP address of the server from the local area network. To choose a device connected to the router's LAN at the moment, select the relevant value from the drop-down list (the field will be filled in automatically).
Remote IP The IP address of the server from the external network.
Click the Apply button.
To edit the parameters of an existing server, select the relevant server in the table. On the opened page, change the needed parameters and click the Apply button.
To remove an existing server, select the relevant server in the table. On the opened page, click the
Delete button.
To remove all servers from this page, click the Clear all button (the button is displayed if at least one server exists).
Page 142 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
DMZ
A DMZ is a host or network segment located “between” internal (local) and external (global) networks. In the router, the DMZ implements the capability to transfer a request coming to a port of the DSL router from the external network to a specified host of the internal network.
On the Firewall / DMZ page you can specify the IP address of the DMZ host.
Figure 103. The Firewall / DMZ page.
To enable the DMZ, select the Enabled checkbox, enter the IP address of a host from your network in the IP address field, and click the Apply button. To choose a device connected to the router's
LAN at the moment, select the relevant value from the drop-down list (the field will be filled in automatically).
Note that when the DMZ is enabled, all traffic coming to a port of the WAN interface of the router is directed to the same port of the specified IP address. Also note that virtual servers have higher priority than the DMZ host. In other words, if there has been created a virtual server that directs traffic from external port 80 to a port of the device from the router's local network, then entering http://router_WAN_IP in the address bar, users of the external network are directed to the specified port and IP address configured for the virtual server, but not to port 80 of the device with the IP address specified on the Firewall / DMZ page.
To disable the DMZ, deselect the Enabled checkbox and click the Apply button.
Page 143 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
MAC Filter
On the Firewall / MAC filter page, you can configure MAC-address-based filtering for computers of the router's LAN.
Figure 104. The Firewall / MAC filter page.
To specify a new address for the MAC filter, click the Add button. In the line displayed, you can specify the following parameters:
Parameter Description
MAC address
The MAC address of a device from the router's LAN. You can enter the MAC address of a device connected to the router's LAN at the moment. To do this, select the relevant device from the Known
IP/MAC addresses drop-down list (the field will be filled in automatically).
Action
Select an action for the rule.
Deny : Blocks access to the router's network for the device with the specified MAC address.
Allow : Allows access to the router's network and to the Internet for the device with the specified MAC when the rules on the Firewall /
IP filters page block access for this device.
After specifying the needed parameters, click the Apply button.
Page 144 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
To edit a rule for filtering, select a needed field in the relevant line of the table, change its value, and click the Apply button.
To remove a rule for filtering, select the checkbox located to the left of the relevant line in the table and click the Apply button.
Page 145 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
3G Modem
This menu is designed to operate USB modems.
If the PIN code check for the SIM card inserted into your USB modem is not disabled, then upon the first access to the pages of the 3G modem menu (under the current web-interface session) the page for checking the PIN code is displayed 6 . Enter the PIN code in the relevant field and click the
Enter link.
Information
On the 3G modem / Information page, you can view data on the USB modem connected to the router.
Figure 105. The 3G modem / Information page.
When a USB modem is connected to the router, the following data are displayed on the page:
Parameter Description
Vendor The manufacturer of your USB modem.
Model
Revision
IMSI
The alphanumeric code of the model of your USB modem.
The revision of the firmware of your USB modem.
The code stored in the SIM card inserted to your USB modem.
6 For GSM USB modems only. For LTE and CDMA USB modems, it is required to disable the PIN code check on the identification card prior to connecting the USB modem to the router.
Page 146 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Parameter
IMEI
Signal level
Operator name
Mode
Configuring via Web-based Interface
Description
The code stored in the memory of the USB modem.
The signal level at the input of the modem's receiver. The zero signal level shows that you are out of the coverage area of the selected operator's network.
When the needed network is available, the name of the operator is displayed in this field.
A type of the network to which the USB modem is connected.
Page 147 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
PIN
On the 3G modem / PIN page, you can change the PIN code of the identification card inserted into your USB modem, disable or enable the check of the PIN code.
!
The operations presented on this page are not available for LTE and CDMA USB modems.
The current state of the identification card inserted into your USB modem is displayed in the
Status field. If the PIN code is entered incorrectly or the PIN code is not entered when the PIN code check is enabled, the Device is locked value is displayed in the Status field. If the PIN code is entered correctly or the PIN check is disabled, the Device is unlocked value is displayed in the Status field.
If the PIN code check for the SIM card inserted into your USB modem is not disabled, the Yes value is displayed in the PIN check field. If the PIN check is disabled, the No value is displayed in the PIN check field.
Figure 106. The 3G modem / PIN page. The PIN code management tab.
To disable the PIN code check, enter the current PIN code in the PIN code field and click the
Disable PIN check button (the button is displayed if the PIN code check is enabled).
To enable the PIN code check, enter the PIN code, used before disabling the check, in the PIN code field and click the Enable PIN check button (the button is displayed if the PIN code check is disabled).
To change the PIN code, enable the PIN code check and proceed to the Changing PIN code tab.
Page 148 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 107. The 3G modem / PIN page. The Changing PIN code tab.
Enter the current code in the PIN code field, then enter a new code in New PIN code and New
PIN code confirmation fields and click the Apply button.
If upon one of the operations described above you have entered an incorrect value in the PIN code field three times (the number of remaining attempts is displayed in the Attempts left field), the identification card inserted into your USB modem is blocked.
For further use of the card, enter the PUK code in the relevant field, and then specify a new PIN code for your SIM card in the New PIN code field. Click the Enter button.
Page 149 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
USB Storage
This menu is designed to operate USB storages. Here you can do the following:
• view data on the connected USB storage
• view content of the connected USB storage
• configure the router as a print server
• configure SMB-based access to the USB storage
• enable the built-in FTP server of the router
• enable the built-in DLNA server of the router.
Information
On the USB storage / Information page, you can view data on the USB storage connected to the router.
Figure 108. The USB storage / Information page.
The following data are presented on the page: the name, total and free space of the storage, and the type of its file system.
If the USB storage is divided into volumes, several values are displayed in the USB storage dropdown list. Select the needed value to view data on the volume (partition) of the USB storage.
To safely disconnect the USB storage, click the Unmount storage button. When the No value is displayed in the USB storage drop-down list, remove the storage from the router.
Page 150 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
To disconnect one volume of the storage, select the needed value from the USB storage dropdown list and click the Unmount volume button.
Filebrowser
On the USB storage / Filebrowser page, you can view the content of your USB storage connected to the router and remove separate folders and files from the USB storage.
Figure 109. The USB storage / Filebrowser page.
To view the content of the USB storage, double-click the icon of the storage or storage partition.
The list of folders and files will be displayed on the page.
To proceed to a folder, select it in the directory structure on the left part of the page.
To refresh the folder contents, right-click the line corresponding to this folder, and select the
Refresh value in the menu displayed.
To remove a folder or file, right-click the line corresponding to this folder or file, and select the
Delete value in the menu displayed.
Page 151 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Print Server
On the USB storage / Print-server page, you can configure the router as a print server. Being configured in this way, the router will allow your LAN users to share the printer connected to the
USB port of the router.
To connect a printer to the router, power off both devices. Connect printer to the USB port of the router, power on the printer, then power on the router.
Figure 110. The USB storage / Print-server page.
To configure the router as a print server, select the Enable/Disable print-server checkbox and click the Apply button.
If you don't want to use the router as a print server, deselect the Enable/Disable print-server checkbox and click the Apply button.
Page 152 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Samba
On the USB storage / Samba page, you can enable the built-in Samba server of the router to provide access to the USB storage for users of your LAN.
Figure 111. The USB storage / Samba page.
You can enable the Samba server only when a USB storage is connected to the router (in this case, the Connected value is displayed in the USB storage field). To enable the Samba server, select the Enable checkbox.
In the Workgroup field, leave the value specified by default ( WORKGROUP ) or specify a new name of a workgroup participants of which will have access to the content of the USB storage.
In the NetBIOS field, specify a new name of the USB storage for identification in your LAN. Use digits and/or Latin characters.
After specifying the needed parameters, click the Apply button.
To allow access to the content of the USB storage for users of your LAN, proceed to the System /
Users page and create needed accounts.
To disable the built-in Samba server of the router, deselect the Enable checkbox and click the
Apply button.
Page 153 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
FTP
On the USB storage / FTP page, you can enable the built-in FTP server of the router to provide access to the USB storage for users of your LAN.
Figure 112. The USB storage / FTP page.
You can enable the FTP server only when a USB storage is connected to the router (in this case, the
Connected value is displayed in the USB storage field). Select the Enable checkbox; if needed, change the router's port used by the FTP server in the Port field (by default, the standard port 21 is specified). Then click the Apply button.
To allow access to the content of the USB storage for users of your LAN, proceed to the System /
Users page and create needed accounts.
To disable the built-in FTP server of the router, deselect the Enable checkbox and click the Apply button.
Page 154 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
DLNA
On the USB storage / DLNA page , you can enable the built-in DLNA server of the router to provide access to the USB storage for users of your LAN.
The built-in media server allows DLNA certified devices of your LAN to play multimedia content of the USB storage. Multimedia content can be played only when a USB storage is connected to the router.
Figure 113. The USB storage / DLNA page.
To enable the DLNA server, select the Enabled checkbox.
In the Update interval field, specify the time period (in seconds), at the end of which the media server updates the file list of the USB storage, or leave the value specified by default ( 900 ). The minimal value you can specify is 60 seconds.
In the DLNA server name field, specify a new name of the DLNA server for easier identification in your LAN or leave the value specified by default ( D-Link DLNA Server ). Use digits and/or
Latin characters.
To allow access to the content of the USB storage for users of your LAN, click the Add button. In the line displayed, locate a folder. To do this, click the button located to the right of the Path field
(the button is available if the Path field is selected). In the opened window, double-click the icon of the storage or storage partition, select the needed folder in the directory structure, and click the
Open button.
For each folder you can define the type of files which will be available for users of your LAN. To do this, select the needed type of files from the Type drop-down list. To share all files of a folder, select the All value from the Type drop-down list.
Page 155 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
To undo the last changes, click the Reset button.
After specifying the needed parameters, click the Apply button.
To remove a folder from the list, select the checkbox in the line containing the relevant folder and click the Apply button.
To disable the built-in DLNA server of the router, deselect the Enabled checkbox and click the
Apply button.
Page 156 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Transmission
In this menu you can configure the built-in Transmission torrent client and manage distributing and downloading processes.
Transmission Settings
On the Transmission / Transmission settings page, you can configure all needed settings for the built-in Transmission client.
Figure 114. The Transmission / Transmission settings page.
You can specify the following parameters:
Parameter Description
Enabled
Port
Torrents directory
USB-storage path
Web-interface port
Select the checkbox to activate the Transmission client.
The router's port which will be used by the Transmission client.
The folder on the USB storage where files of the Transmission client will be stored.
The path to the USB storage in the file system of the router.
The port on which the web-based interface of the Transmission client is available.
Page 157 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Parameter Description
Open files limit
Peer limit
Authorization
User name
The maximum number of files which clients can download simultaneously.
The maximum number of the service users from which you can download files.
Select the checkbox if you want the Transmission client to request for username and password when accessing its web-based interface.
Then fill in the User name and Password fields.
The username to access the web-based interface of the Transmission client.
Password
The password to access the web-based interface of the Transmission client.
In the Web-interface page field, the address of the web-based interface of the Transmission client is displayed.
After specifying the needed parameters, click the Apply button.
Page 158 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Web-interface Page
Using the web-based interface of the built-in Transmission torrent client you can manage the process of downloading files to the USB storage connected to the router.
Figure 115. The web-based interface of the Transmission torrent client.
To add a new torrent file, click the button ( Add ) and select a file stored on your PC. Click the button Добавить ( Add ) in the dialog box appeared.
To stop downloading of a file, select it in the list and click the button ( Stop ).
To resume downloading of a file, select it in the list and click the button
To view data on a file, select it in the list and click the button
( Resume ).
( Inspector ).
To remove a file presented on the page, select it in the list and click the button ( Remove ).
Page 159 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Control
This menu is designed to create restrictions on access to certain web sites.
URL Filter
On the Control / URL filter page, you can specify restrictions on access to certain web sites.
Figure 116. The Control / URL filter page. The Configuration tab.
To enable the URL filter, select the Enable/Disable URL filter checkbox on the Configuration tab, then select a needed mode from the URL filter type drop-down list:
• Block listed URLs : when this value is selected, the router blocks access to all addresses specified on the URL addresses tab;
• Block all URLs except listed : when this value is selected, the router allows access to addresses specified on the URL addresses tab and blocks access to all other web sites.
Click the Apply button.
To specify URL addresses to which the selected filtering will be applied, go to the URL addresses tab.
Page 160 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 117. The Control / URL filter page. The URL addresses tab.
Click the Add button and enter an address in the field displayed. Then click the Apply button.
To remove an address from the list of URL addresses, select the checkbox located to the left of the relevant URL address and click the Apply button.
To disable the URL filter, deselect the Enable/Disable URL filter checkbox on the
Configuration tab, then click the Apply button.
Page 161 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
System
In this menu you can do the following:
• change the password used to access the router's settings
• save the current settings to the non-volatile memory
• create a backup of the router's configuration
• restore the router's configuration from a previously saved file
• restore the factory default settings
• view the system log
• update the firmware of the router
• configure automatic notification on new firmware version
• configure automatic synchronization of the system time or manually configure the date and time for the router
• check availability of a host on the Internet through the web-based interface of the router
• allow or forbid access to the router via TELNET
• create accounts for users to allow access to the content of the USB storage.
Page 162 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Administrator Password
On the System / Administrator password page, you can change the password for the administrator account used to access the web-based interface of the router and to access the device settings via TELNET.
!
For security reasons, it is strongly recommended to change the administrator password upon initial configuration of the router.
Figure 118. The page for modifying the administrator password.
Enter the new password in the Password and Confirmation fields and click the Apply button.
Page 163 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Configuration
On the System / Configuration page, you can save the changed settings to the non-volatile memory, restore the factory defaults, backup the current configuration, or restore the router's configuration from a previously created file.
Figure 119. The System / Configuration page.
The following buttons are available on the page:
Control Description
Save
Factory
Backup
Click the button to save settings to the non-volatile memory. Please, save settings every time you change the router's parameters.
Otherwise the changes will be lost upon hardware reboot of the router.
Click the button to restore the factory default settings. Also you can restore the factory defaults via the hardware RESET button (see the
Saving and Restoring Settings section, page 36).
Click the button and follow the dialog box appeared to save the configuration (all settings of the router) to your PC.
Browse
Click the button and follow the dialog box appeared to select a previously saved configuration file (all settings of the router) located on your PC and upload it.
Actions of the Save , Factory , and Backup buttons also can be performed via the top-page menu displayed when the mouse pointer is over the System caption.
Page 164 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
System Log
On the System / System log page, you can set the system log options and configure sending the system log to a remote host.
Figure 120. The System / System log page. The Configuration tab.
To enable logging of the system events, select the Logging checkbox on the Configuration tab.
Then specify the needed parameters.
Control Description
Logging type
Logging level
Server
Select a type of logging from the drop-down list.
• Local : the system log is stored in the router's memory (and displayed on the Log tab). When this value is selected, the
Server and Port fields are not displayed.
• Remote : the system log is sent to the remote host specified in the Server field.
• Local and remote : the system log is stored in the router's memory (and displayed on the Log tab) and sent to the remote host specified in the Server field.
Select a type of messages and alerts/notifications to be logged.
The IP or URL address of the host from the local or global network, to which the system log will be sent.
Page 165 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Control Description
Port
A port of the host specified in the Server field. By default, the value
514 is specified.
After specifying the needed parameters, click the Apply button.
To disable logging of the system events, deselect the Logging checkbox and click the Apply button.
On the Log tab, the events specified in the Logging level list are displayed.
Figure 121. The System / System log page. The Log tab.
To view the latest system events, click the Refresh button.
To save the system log to your PC, click the Export button and follow the dialog box appeared.
Page 166 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Firmware Upgrade
On the System / Firmware upgrade page, you can upgrade the firmware of the router and configure the automatic check for updates of the router's firmware.
!
Upgrade the firmware only when the router is connected to your PC via a wired connection.
Figure 122. The System / Firmware upgrade page.
The current version of the router's firmware is displayed in the Firmware version field located next the D-Link logo in the top left corner of the page.
By default, the automatic check for the router's firmware updates is enabled. If a firmware update is available, a notification will be displayed in the top right corner of the page.
To disable the automatic check for firmware updates, in the Remote update section, deselect the
Check for updates automatically checkbox and click the Apply settings button.
To enable the automatic check for firmware updates, in the Remote update section, select the
Check for updates automatically checkbox and click the Apply settings button. By default, in the Remote server URL field, the D-Link update server address ( fwupdate.dlink.ru
) is specified.
You can upgrade the firmware of the router locally (from the hard drive of your PC) or remotely
(from the update server).
Page 167 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Local Update
!
Attention! Do not turn off the router before the firmware upgrade is completed. This may cause the device breakdown.
To update the firmware of the router locally, follow the next steps:
1. Download a new version of the firmware from www.dlink.ru
.
2. Click the Browse button on the System / Firmware upgrade page to locate the new firmware file.
3. Click the Update button to upgrade the firmware of the router.
4. Wait until the router is rebooted (about one and a half or two minutes).
5. Log into the web-based interface using the login ( admin ) and the current password.
6. Select the Factory line in the top-page menu displayed when the mouse pointer is over the
System caption.
7. Wait until the router is rebooted. Log into the web-based interface, using the default IP address, login and password ( 192.168.0.1
, admin , admin ).
After the upgrade is completed, the new version of the firmware will be displayed in the Firmware version field in the top left corner of the page.
Page 168 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Remote Update
!
Attention! Do not turn off the router before the firmware upgrade is completed. This may cause the device breakdown.
To update the firmware of the router remotely, follow the next steps:
1. On the System / Firmware upgrade page, in the Remote update section, click the
Check updates button to check if a newer firmware version exists.
2. Click the OK button in the window displayed to upgrade the firmware of the router. Also you can upgrade the firmware of the router by clicking the Remote update button in the bottom right corner of the page (the button is displayed if a newer version of the firmware is available).
3. Wait until the router is rebooted (about one and a half or two minutes).
4. Log into the web-based interface using the login ( admin ) and the current password.
5. Select the Factory line in the top-page menu displayed when the mouse pointer is over the
System caption.
6. Wait until the router is rebooted. Log into the web-based interface, using the default IP address, login and password ( 192.168.0.1
, admin , admin ).
After the upgrade is completed, the new version of the firmware will be displayed in the Firmware version field in the top left corner of the page.
Page 169 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
NTP Client
On the System / NTP client page, you can manually set the time and date of the router or configure automatic synchronization of the system time with a time server on the Internet.
Figure 123. The System / NTP client page.
To set the system time manually, select the Manual value from the Mode drop-down list and set the time and date in the fields displayed. Then click the Apply button.
To enable automatic synchronization with a time server, follow the next steps:
1. Select the NTP value from the Mode drop-down list.
2. Select your time zone from the drop-down list. To set the time zone in accordance with the settings of your operating system, click the Determine timezone button in the bottom right corner of the page.
3. Specify the needed NTP server in the NTP servers field or leave the server specified by default.
4. Click the Apply button.
In some cases NTP servers addresses are provided by your ISP. In this case, you need to s elect the
Get NTP server addresses using DHCP checkbox. Contact your ISP to clarify if this checkbox needs to be enabled. If the Get NTP server addresses using DHCP checkbox is selected, the NTP servers field is not available.
Page 170 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
!
When the router is powered off or rebooted, the system time is reset to the default value.
If you have set automatic synchronization for the system time, the internal clock of the device will be configured after connecting to the Inter net. If you have set the system time manually, you need to set the time and date again (see above).
Page 171 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Ping
On the System / Ping page, you can check availability of a host from the local or global network via the Ping utility.
The Ping utility sends echo requests to a specified host and receives echo replies.
Figure 124. The System / Ping page.
To check availability of a host, enter the IP address or name of this host in the Host field, and select a number of requests that will be sent in order to check its availability from the Count of packets drop-down list. Click the Start button. After a while, the results will be displayed on the page.
Page 172 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Telnet
On the System / Telnet page, you can enable or disable access to the device settings via TELNET from your LAN. By default, access is enabled.
Figure 125. The System / Telnet page.
To disable access via TELNET, deselect the On checkbox and click the Apply button.
To enable access via TELNET again, select the On checkbox. In the Port field, enter the number of the router's port through which access will be allowed (by default, the port 23 is specified). Then click the Apply button.
Page 173 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Users
On the System / Users page, you can create user accounts to provide access to data on the USB storage connected to the router.
Figure 126. The System / Users page.
To create a new user account, click the Add button.
Page 174 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Configuring via Web-based Interface
Figure 127. The page for adding a user.
On the opened page, in the Login field, specify a username, and in the Password and Password confirmation fields – the password for the account. You can use letters of the Latin and Russian alphabets (uppercase and/or lowercase) and digits.
!
You cannot create accounts with the following usernames: ftp , admin , support , user , .
To change the password of an account, select the relevant line in the table. On the opened page, enter a new value in the Password and Password confirmation fields, then click the Apply button.
To remove an account, select a relevant line in the table. On the opened page, click the Delete button.
To remove all accounts from this page, click the Clear all button (the button is displayed if at least one account exists).
Page 175 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
CHAPTER 5. OPERATION GUIDELINES
Supported USB Modems
GSM modems
• Alcatel X500
• D-Link DWM-152C1
• D-Link DWM-156A6
• D-Link DWM-156A7
• D-Link DWM-156C1
• D-Link DWM-157B1
• D-Link DWM-157B1 (Velcom)
• D-Link DWM-158D1
• Huawei E150
• Huawei E1550
• Huawei E156G
• Huawei E160G
• Huawei E169G
• Huawei E171
• Huawei E173 (Megafon)
• Huawei E220
• Huawei E352 (Megafon)
• Huawei E367 (3G mode)
• Huawei E392 (3G mode)
• ZTE MF112
• ZTE MF192
• ZTE MF626
• ZTE MF627
• ZTE MF652
• ZTE MF668
• ZTE MF752
Operation Guidelines
Page 176 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
CDMA modems 7
• Airplus MCD-650
• Airplus MCD-800
• AnyDATA ADU-300A
• AnyDATA ADU-500A
• AnyDATA ADU-510A
• Huawei EC306
• ZTE AC5710
• ZTE AC5730
LTE modems
• Huawei E367
• Huawei E392
• Huawei E3276 (Megafon М150-1)
• Megafon М100-1
• Yota LU150
• Yota WLTUBA-107
Operation Guidelines
!
The manufacturer does not guarantee proper operation of the router with every modification of the firmware of USB modems.
7 Performance of CDMA USB modems is not tested for the current firmware version.
Page 177 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Operation Guidelines
Safety Instructions
Place your router on a flat horizontal surface or mount the router on the wall (the mounting holes are located on the back panel of the device). Make sure that the router is provided with sufficient ventilation.
To prevent overheating, do not obstruct the ventilation openings of the router.
Plug the router into a surge protector to reduce the risk of damage from power surges and lightning strikes.
Operate the router only from an electrical outlet with the correct power source as indicated on the adapter.
Do not open the cover of the router. Otherwise any warranty will be invalidated.
Unplug the equipment before dusting and cleaning. Use a damp cloth to clean the equipment. Do not use liquid/aerosol cleaners or magnetic/static cleaning devices.
Page 178 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Operation Guidelines
Wireless Installation Considerations
The DSL-2750U device lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF noise in your home or office. To maximize your wireless range, follow the guidelines below.
1. Keep the number of walls and ceilings between the DSL-2750U device and other network devices to a minimum – each wall or ceiling can reduce your wireless network range by 3-
90 feet (1-30 meters).
2. Be aware of the direct line between network devices. Place your devices so that the signal travels straight through a wall or ceiling (instead of at an angle) for better reception.
3. Building materials make a difference. A solid metal door or aluminum studs may have a negative effect on your wireless range. Try to position your router, access points, and computers so that the signal passes through drywalls or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your router away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.
5. If you are using 2.4 GHz cordless phones or X-10 equipment (wireless devices such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. Note, that the base transmits a signal even if the phone in not in use.
Page 179 of 182
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Abbreviations and Acronyms
GSM
IGD
IGMP
IMEI
IMSI
IP
DLNA
DMZ
DNS
DTIM
FTP
GMT
IPoA
ISP
LAN
LCC
LCP
3G
AES
ARP
BSSID
CCK
CDMA
CRC
DDNS
DDoS
DHCP
CHAPTER 6. ABBREVIATIONS AND ACRONYMS
Third Generation
Advanced Encryption Standard
Address Resolution Protocol
Basic Service Set Identifier
Complementary Code Keying
Code Division Multiple Access
Cyclic Redundancy Check
Dynamic Domain Name System
Distributed Denial of Service
Dynamic Host Configuration Protocol
Digital Living Network Alliance
DeMilitarized Zone
Domain Name System
Delivery Traffic Indication Message
File Transfer Protocol
Greenwich Mean Time
Greenwich Mean Time
Internet Gateway Device
Internet Group Management Protocol
International Mobile Equipment Identity
International Mobile Subscriber Identity
Internet Protocol
Internet Protocol over ATM
Internet Service Provider
Local Area Network
Logical Link Control
Link Control Protocol
Page 180 of 182
SIP
SMB
SSID
TKIP
UPnP
URL
QoS
R-UIM
RIP
RTS
RTSP
SIM
USB
VC
VCI
VLAN
PBC
PIN
PPPoA
PPPoE
PSK
PUK
LTE
MAC
MTU
NAT
NTP
OFDM
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Long Term Evolution
Media Access Control
Maximum Transmission Unit
Network Address Translation
Network Time Protocol
Orthogonal Frequency Division Multiplexing
Push Button Configuration
Personal Identification Number
Point-to-Point Protocol over ATM
Point-to-point protocol over Ethernet
Pre-shared key
PIN Unlock Key
Quality of Service
Removable User Identity Module
Routing Information Protocol
Request To Send
Real Time Streaming Protocol
Subscriber Identification Module
Session Initiation Protocol
Server Message Block
Service Set Identifier
Temporal Key Integrity Protocol
Universal Plug and Play
Uniform Resource Locator
Universal Serial Bus
Virtual Circuit
Virtual Circuit Identifier
Virtual Local Area Network
Page 181 of 182
Abbreviations and Acronyms
DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
VPI
WAN
WEP
Wi-Fi
WLAN
WPA
WPS
Virtual Path Identifier
Wide Area Network
Wired Equivalent Privacy
Wireless Fidelity
Wireless Local Area Network
Wi-Fi Protected Access
Wi-Fi Protected Setup
Abbreviations and Acronyms
Page 182 of 182
Stáhnout
Veřejný odkaz aktualizován
Veřejný odkaz na váš chat byl aktualizován. You may view and manage your chat links after registration here.
Veřejný odkaz na dokument
Reklama
Klíčové vlastnosti
Black
Wi-Fi 4 (802.11n)
Fast Ethernet
DSL WAN
Ethernet LAN (RJ-45) ports: 4
Quality of Service (QoS) support
