STD15P6F6
Automotive P-channel 60 V, 0.13 Ω typ., 10 A STripFET™ VI
DeepGATE™ Power MOSFET in a DPAK package
Datasheet
-
preliminary data
TAB
DPAK
1
3
Features
Order code
STD15P6F6
V
DSS
60 V
R
DS(on) max
0.16 Ω
• Designed for Automotive applications
• R
DS(on)
* Q g
industry benchmark
• Extremely low on-resistance R
DS(on)
• High avalanche ruggedness
• Low gate drive power losses
I
D
10 A
Figure 1. Internal schematic diagram
, TAB
Applications
•
Switching applications
Description
This device is a P-channel Power MOSFET developed using the 6 th
generation of STripFET™
DeepGATE™ technology, with a new gate structure. The resulting Power MOSFET exhibits the lowest R
DS(on) in all packages.
AM11258v1
Obsolete Product(s) - Obsolete Product(s)
Table 1. Device summary
Order code Marking Package Packaging
STD15P6F6 15P6F6
Note: For the P-channel Power MOSFET the actual polarity of the voltages and the current must be reversed.
March 2014 DocID024625 Rev 2
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice.
1/17 www.st.com
17
5
6
3
4
1
2
Contents
Contents
STD15P6F6
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Obsolete Product(s) - Obsolete Product(s)
2/17 DocID024625 Rev 2
STD15P6F6 Electrical ratings
Symbol
Table 2. Absolute maximum ratings
Parameter
V
DS
V
GS
I
D
(1)
I
D
I
DM
(2)
P
TOT
T stg
T j
Drain-source voltage
Gate-source voltage
Drain current (continuous) at T
Drain current (continuous) at T
Drain current (pulsed)
Total dissipation at T
Storage temperature
C
= 25 °C
C
C
= 25 °C
= 100 °C
Max. operating junction temperature
1.
Limited by package
2.
Pulse width limited by safe operating area
Symbol
Table 3. Thermal data
Parameter
R thj-case
Thermal resistance junction-case max
R thj-pcb
Thermal resistance junction-pcb max
1.
When mounted on 1 inch
2
FR-4, 2 Oz copper board
(1)
Value
60
± 20
10
7.2
40
35
-55 to 175
175
Unit
A
A
A
V
V
W
°C
°C
Value
4.29
50
Unit
°C/W
°C/W
Note: For the P-channel Power MOSFET the actual polarity of the voltages and the current must be reversed.
Obsolete Product(s) - Obsolete Product(s)
DocID024625 Rev 2 3/17
Electrical characteristics STD15P6F6
(T
CASE
= 25 °C unless otherwise specified).
Symbol Parameter
V
(BR)DSS
Drain-source breakdown
Voltage
V
I
I
DSS
GSS
GS(th)
R
DS(on)
Zero gate voltage drain current (V
GS
= 0)
Gate body leakage current
(V
DS
= 0)
Gate threshold voltage
Static drain-source onresistance
Table 4. Static
Test conditions
I
D
= 250 µA, V
GS
= 0
V
DS
= 60 V
V
DS
= 60 V, Tc = 125 °C
V
GS
= ± 20 V
V
DS
= V
GS
, I
D
= 250 µA
V
GS
= 10 V, I
D
= 5 A
Min.
Typ.
Max.
Unit
60
2
0.13
1
10
± 100 nA
V
µA
µA
4
0.16
V
Ω
Symbol
C iss
C oss
C
Q rss g
Q gs
Q gd
Parameter
Input capacitance
Output capacitance
Reverse transfer capacitance
Total gate charge
Gate-source charge
Gate-drain charge
Table 5. Dynamic
Test conditions
V
DS
= 48 V, f=1 MHz,
V
GS
= 0
V
DD
= 30 V, I
D
= 10 A
V
GS
= 10 V
Figure 14
-
-
-
-
Min.
Typ.
Max.
Unit
-
340
40
-
pF pF
20
6.4
1.7
1.7
-
-
-
pF nC nC nC
Table 6. Switching on/off (inductive load)
Parameter Test conditions Min.
Symbol Typ.
Max.
Unit t d(on)
Turn-on delay time
Rise time
-
-
64
5.3
Obsolete Product(s) - Obsolete Product(s)
ns ns t r
V
DD
= 48 V, I
D
= 5 A,
R
G
= 4.7 Ω, V
GS
= 10 V t d(off)
Turn-off delay time 14 ns
Figure 13
t f
Fall time 3.7
ns
For the P-channel Power MOSFET the actual polarity of the voltages and the current must be reversed.
4/17 DocID024625 Rev 2
STD15P6F6
Note:
Electrical characteristics
Symbol Parameter
Table 7. Source drain diode
Test conditions
I
SD
I
SDM
(1)
V
SD
(2)
I t rr
Q rr
RRM
Source-drain current
Source-drain current (pulsed)
Forward on voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
1.
Pulse width limited by safe operating area.
2.
Pulsed: pulse duration = 300 µs, duty cycle 1.5%
I
SD
= 5 A, V
GS
= 0
I
SD
= 10 A, di/dt = 100 A/µs,
V
DD
= 48 V
Figure 15
-
-
-
-
-
Min.
Typ.
Max.
Unit
10
40
1.1
20
17.8
A
A
V ns nC
1.8
A
For the P-channel Power MOSFET the actual polarity of the voltages and the current must be reversed.
Obsolete Product(s) - Obsolete Product(s)
DocID024625 Rev 2 5/17
Electrical characteristics STD15P6F6
2.1 Electrical characteristics (curves)
Figure 3. Thermal impedance
I
D
(A)
Figure 2. Safe operating area
AM15408v1
10
100µs
DS(on)
1ms
1
Oper
Limited b
Tj= 175°C
Tc=25°C
Single pulse
10ms
0.1
0.1
1 10 V
DS
(V)
Figure 4. Output characteristics
AM15340v1
I
D
(A)
VGS= 10 V
25
Figure 5. Transfer characteristics
AM15346v1
I
D
(A)
25
VDS= 9 V
20 VGS= 6 V
20
15
15
VGS= 5 V
10 10
5
VGS= 4 V
5
0
0 5 10 V
DS
(V)
0
2 3 4 5 6 7 8 9 10 V
GS
(V)
Figure 6. Gate charge vs gate-source voltage
AM15341v2
V
GS
(V)
10
V
DD
=30V
I
D
=10A
Figure 7. Static drain-source on-resistance
R
DS(on)
(m
Ω
)
180
V
GS
=10V
AM15350v1
6
4
2
0
0 2 4 6 Q g
(nC)
160
140
120
100
1 2 3 4 5 6 7 8 9 I
D
(A)
6/17 DocID024625 Rev 2
STD15P6F6 Electrical characteristics
Figure 8. Capacitance variations
C
(pF)
400
AM15342v1
Figure 9. Normalized V
(BR)DSS
vs temperature
AM15349v1
V
(BR)DSS
(norm)
1.15
I
D
= 1mA
350
Ciss
300 1.10
250
200
150
1.05
1
100
50
0
0 10 20 30 40 50
Coss
Crss
V
DS
(V)
0.95
0.90
-55 -30 -5 20 45 70 95 120 T
J
(°C)
Figure 10. Normalized gate threshold voltage vs temperature
AM15344v1 V
GS(th)
(norm)
1.10
1
0.90
0.80
0.70
I
D
=250 µA
Figure 11. Normalized on-resistance vs temperature
AM15350v1
R
DS(on)
(norm)
2
V
GS
=10V
1.8
1.6
1.4
1.2
1
0.8
0.6
0.4
-55 -30 -5 20 45 70 95 120 T
J
(°C)
0.60
-55 -30 -5 20 45 70 95 120 T
J
(°C)
Figure 12. Source-drain diode forward characteristics
AM15345v1
V
SD
(V)
T
J
=-55°C
1.05
T
J
=25°C
0.85
0.75
0.65
0.55
2 4 6
T
J
=175°C
8 I
SD
(A)
DocID024625 Rev 2 7/17
Test circuits
3 Test circuits
STD15P6F6
Figure 13. Switching times test circuit for resistive load
Figure 14. Gate charge test circuit
AM11255v1
Figure 15. Test circuit for diode recovery behaviour
AM11256v1
AM11257v1
Obsolete Product(s) - Obsolete Product(s)
8/17 DocID024625 Rev 2
STD15P6F6
4 Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
® specifications, grade definitions and product status are available at: www.st.com
.
ECOPACK
®
is an ST trademark.
Obsolete Product(s) - Obsolete Product(s)
DocID024625 Rev 2 9/17
Package mechanical data
Figure 16. DPAK (TO-252) drawing
STD15P6F6
Obsolete Product(s) - Obsolete Product(s)
0068772_M_type_A
10/17 DocID024625 Rev 2
STD15P6F6
Dim.
E1 e e1
H
L
(L1)
L2
L4
R
V2 b4 c c2
D
D1
E
A
A1
A2 b
Package mechanical data
Table 8. DPAK (TO-252) type A mechanical data mm
Typ.
Min.
2.20
0.90
0.03
0.64
5.20
0.45
0.48
6.00
5.10
6.40
4.70
2.28
4.40
9.35
1.00
2.80
0.80
0.60
0.20
0°
6.60
4.60
10.10
1.50
1.00
8°
Max.
2.40
1.10
0.23
0.90
5.40
0.60
0.60
6.20
Obsolete Product(s) - Obsolete Product(s)
DocID024625 Rev 2 11/17
Package mechanical data
Figure 17. DPAK footprint
(a)
STD15P6F6
Footprint_REV_M_type_A
Obsolete Product(s) - Obsolete Product(s)
12/17 a.
All dimensions are in millimeters
DocID024625 Rev 2
STD15P6F6
5 Packaging mechanical data
T
Top cover tape
Figure 18. Tape
10 pitches cumulative tolerance on tape +/- 0.2 mm
P0 D P2
Packaging mechanical data
F
E
W
B1
K0
B0
For machine ref. only including draft and radii concentric around B0
A0 P1
User direction of feed
D1
User direction of feed
R
Bending radius
AM08852v1
Obsolete Product(s) - Obsolete Product(s)
DocID024625 Rev 2 13/17
Packaging mechanical data
REEL DIMENSIONS
D
B
Figure 19. Reel
40mm min.
Access hole
At sl ot location
C
A
Full radius
T
N
STD15P6F6
Tape slot in core for tape start 25 mm min.
width
G measured at hub
AM08851v2
Obsolete Product(s) - Obsolete Product(s)
14/17 DocID024625 Rev 2
STD15P6F6
Dim.
A0
B0
B1
D
D1
E
F
K0
P0
P1
P2
R
T
W
Packaging mechanical data
Min.
6.8
10.4
1.5
1.5
1.65
7.4
2.55
3.9
7.9
1.9
40
0.25
15.7
Tape
Table 9. Tape and reel mechanical data
Reel mm mm
Dim.
1.85
7.6
2.75
4.1
8.1
2.1
Max.
7
10.6
12.1
1.6
G
N
T
C
D
A
B
Min.
1.5
12.8
20.2
16.4
50
Base qty.
Bulk qty.
0.35
16.3
Max.
330
13.2
18.4
22.4
2500
2500
Obsolete Product(s) - Obsolete Product(s)
DocID024625 Rev 2 15/17
Revision history
Date
07-May-2013
13-Mar-2014
Revision
Table 10. Document revision history
Changes
1
2
First release.
Updated the title in cover page.
Updated Section 4: Package mechanical data
.
Minor text changes
STD15P6F6
Obsolete Product(s) - Obsolete Product(s)
16/17 DocID024625 Rev 2
STD15P6F6
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2014 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
DocID024625 Rev 2 17/17
