STB16NF06L
N-channel 60V - 0.07
Ω
- 16A - D
2
PAK
STripFET™ Power MOSFET
General features
Type
STB16NF06L
V
DSS
60V
■
■
■
■
Exceptional dv/dt capability
Low gate charge at 100°C
Logic level device
Low threshold drive
R
DS(on)
<0.09
Ω
I
D
16A
Description
This Power MOSFET is the latest development of
STMicroelectronis unique "Single Feature Size™" strip-based process. The resulting transistor shows extremely high packing density for low onresistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility.
Applications
■ Switching application
1
3
D
2
PAK
Internal schematic diagram
Order codes
Part number
STB16NF06L
Marking
B16NF06L
Package
D
2
PAK
Packaging
Tape & reel
June 2006 Rev 2 1/13 www.st.com
13
5
6
3
4
1
2
Contents
Contents
STB16NF06L
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Packing mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2/13
STB16NF06L Electrical ratings
Table 1.
Symbol
Absolute maximum ratings
Parameter
V
DS
V
DGR
V
GS
I
D
I
D
I
DM
(1)
P tot
Drain-source voltage (V
GS
Drain-gate voltage (R
GS
Gate- source voltage
= 0)
= 20 k Ω )
Drain current (continuous) at T
Drain current (continuous) at T
Drain current (pulsed)
C
C
= 25°C
= 100°C
Total dissipation at T
C
= 25°C
Derating Factor dv/dt
(2)
E
AS
(3)
T stg
T j
Peak diode recovery avalanche energy
Single pulse avalanche energy
Storage temperature
Max. operating junction temperature
1.
Pulse width limited by safe operating area.
2.
I
SD
≤ ≤
DD
=V(
BR)DSS
, T j
≤
JMAX
3.
Starting T j
= 25 °C, I
D
= 8A, V
DD
= 30V
Table 2.
Thermal data
Rthj-case Thermal resistance junction-case max
Rthj-amb Thermal resistance junction-ambient max
T
J
Maximum lead temperature for soldering purpose
Value
60
60
± 16
16
11
64
45
0.3
23
127
-55 to 175
3.33
62.5
300
Unit
V
V
V
A
W
A
A
W/°C
V/ns mJ
°C
°C/W
°C/W
°C
3/13
Electrical characteristics STB16NF06L
(T
CASE
=25°C unless otherwise specified)
Table 3.
Symbol
On/off states
Parameter
V
(BR)DSS
Drain-source breakdown voltage
V
I
I
DSS
GSS
GS(th)
R
DS(on)
Zero gate voltage drain current (V
GS
= 0)
Gate-body leakage current (V
DS
= 0)
Gate threshold voltage
Static drain-source on resistance
Test conditions
I
D
= 250µA, V
GS
=0
V
DS
= Max rating
V
DS
= Max rating,
T
C
= 125°C
V
GS
= ± 16V
V
DS
= V
GS
, I
D
= 250µA
V
GS
= 5V, I
D
= 8A
V
GS
= 10V, I
D
= 8A
Min.
60
1
Typ.
Max.
Unit
V
0.08
0.07
1
10
±100
0.10
0.09
µA
µA nA
V
Ω
Ω
Table 4.
Symbol
Dynamic
Parameter Test conditions g fs
C
C
C
(1) iss oss rss
Forward transconductance
Input capacitance
Output capacitance
Reverse transfer capacitance
I
V
D
V
V
DS
DS
GS
>I
D(on)
= 80A
= 0 x R
DS(on)max,
= 25V, f = 1MHz, t d(on) t r t d(off) t f
Q g
Q gs
Q gd
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Total gate charge
Gate-source charge
Gate-drain charge
V
DD
R
G
(see
V
DD
V
GS
= 30V, I
D
= 4.7
Ω V
GS
= 4.5V
Figure 12
= 48V, I
D
= 4.5V, R
(see
1.
Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %.
= 8A
)
= 16A,
Figure 13
G
)
= 4.7
Ω
Min.
Typ.
Max.
Unit
17 S
345
72
29
10
37
20
12.5
7.3
2.1
3.1
10 pF pF pF ns ns ns ns nC nC nC
4/13
STB16NF06L Electrical characteristics
Table 5.
Symbol
Source drain diode
Parameter Test conditions
I
SD
I
SDM
(1)
Source-drain current
Source-drain current
(pulsed)
V
SD
(2) t rr
Q rr
I
RRM
Forward on voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
I
SD
= 16A, V
GS
= 0
I
SD
= 16A, di/dt = 100A/µs,
V
DD
= 16V, T j
= 150°C
(see
Figure 14 )
1.
Pulse width limited by safe operating area.
2.
Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %
Min.
Typ.
Max.
Unit
50
67.5
2.7
16
64
1.3
A
A
V ns nC
A
5/13
Electrical characteristics
Figure 1.
Safe operating area Figure 2.
Thermal impedance
STB16NF06L
Figure 3.
Output characterisics Figure 4.
Transfer characteristics
Figure 5.
Transconductance Figure 6.
Static drain-source on resistance
6/13
STB16NF06L Electrical characteristics
Figure 7.
Gate charge vs gate-source voltage Figure 8.
Capacitance variations
Figure 9.
Normalized gate threshold voltage vs temperature
Figure 10. Normalized on resistance vs temperature
Figure 11. Source-drain diode forward characteristics
7/13
Test circuit
3 Test circuit
Figure 12. Switching times test circuit for resistive load
Figure 13. Gate charge test circuit
STB16NF06L
Figure 14. Test circuit for inductive load switching and diode recovery times
Figure 15. Unclamped Inductive load test circuit
Figure 16. Unclamped inductive waveform Figure 17. Switching time waveform
8/13
STB16NF06L
4 Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
9/13
Package mechanical data STB16NF06L
DIM.
E
E1
G
L
C2
D
D1
B
B2
C
A
A1
A2
L2
L3
M
R
V2
10
4.88
15
1.27
1.4
2.4
0º
MIN.
4.4
2.49
0.03
0.7
1.14
0.45
1.23
8.95
D
2
PAK MECHANICAL DATA
TO-247 MECHANICAL DATA
mm.
TYP MAX.
4.6
2.69
0.23
0.93
1.7
0.6
1.36
9.35
MIN.
0.173
0.098
0.001
0.027
0.044
0.017
0.048
0.352
8
10.4
0.393
8.5
5.28
15.85
1.4
1.75
3.2
0.192
0.590
0.050
0.055
0.094
0.4
4º inch
TYP.
0.315
0.334
0.015
0.208
0.625
0.055
0.068
0.126
MAX.
0.181
0.106
0.009
0.036
0.067
0.023
0.053
0.368
1
10/13
STB16NF06L
5 Packing mechanical data
D
2
PAK FOOTPRINT
Packing mechanical data
A0
B0
D
D1
E
F
K0
P0
P1
P2
R
T
W
TAPE MECHANICAL DATA
DIM.
mm inch
MIN.
MAX.
MIN.
MAX.
10.5
10.7
0.413 0.421
15.7
15.9
0.618 0.626
1.5
1.6
0.059 0.063
1.59
1.61
0.062 0.063
1.65
1.85
0.065 0.073
11.4
11.6
0.449 0.456
4.8
5.0
0.189 0.197
3.9
4.1
0.153 0.161
11.9
12.1
0.468 0.476
1.9
2.1
0.075 0.082
50 1.574
0.25
0.35 0.0098 0.0137
23.7
24.3
0.933 0.956
* on sales type
TAPE AND REEL SHIPMENT
G
N
T
A
B
C
D
REEL MECHANICAL DATA
DIM.
mm inch
MIN.
MAX.
MIN.
MAX.
330 12.992
1.5
0.059
12.8
13.2
0.504
0.520
20.2
0795
24.4
26.4
0.960
1.039
100 3.937
30.4
1.197
BASE QTY
1000
BULK QTY
1000
11/13
Revision history
Table 6.
Date
Revision history
Revision
21-Jun-2004
26-Jun-2006
1
2
Changes
First version
New template, no content change
STB16NF06L
12/13
STB16NF06L
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED,
AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS,
NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR
SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
13/13
