STB30NF10
STP30NF10 - STP30NF10FP
N-channel 100V - 0.038
Ω
- 35A - D
2
PAK/TO-220/TO-220FP
Low gate charge STripFET™ II Power MOSFET
General features
Type
STB30NF10
STP30NF10
STP30NF10FP
V
DSS
100V
100V
100V
R
DS(on)
<0.045
Ω
<0.045
Ω
<0.045
Ω
■
■
■
Exceptional dv/dt capability
100% avalanche tested
Application oriented characterization
I
D
35A
35A
35A
Description
This Power MOSFET is the latest development of
STMicroelectronis unique "Single Feature Size™" strip-based process. The resulting transistor shows extremely high packing density for low onresistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility.
Applications
■ Switching application
TO-220
1
2
3
1
2
3
TO-220FP
1
3
D
2
PAK
Internal schematic diagram
Order codes
Sales type
STB30NF10T4
STP30NF10
STP30NF10FP
Marking
B30NF10
P30NF10
P30NF10FP
Package
D
2
PAK
TO-220
TO-220FP
Packaging
Tape & reel
Tube
Tube
June 2006 Rev 2 1/16 www.st.com
16
5
6
3
4
1
2
Contents
Contents
STB30NF10 - STP30NF10 - STP30NF10FP
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2/16
STB30NF10 - STP30NF10 - STP30NF10FP Electrical ratings
Table 1.
Symbol
Absolute maximum ratings
Parameter
V
DS
V
DGR
V
GS
I
D
I
D
I
DM
(1)
P tot
Drain-source voltage (V
GS
Drain-gate voltage (R
GS
Gate- source voltage
= 0)
= 20 k Ω )
Drain current (continuous) at T
Drain current (continuous) at T
Drain current (pulsed)
C
C
= 25°C
= 100°C
Total dissipation at T
C
= 25°C
Derating Factor dv/dt
(2)
E
AS
(3)
V
ISO
T stg
T j
Peak diode recovery voltage slope
Single pulse avalanche energy
Insulation withstand voltage (DC)
Storage temperature
Max. operating junction temperature
1.
Pulse width limited by safe operating area.
2.
I
SD
≤ ≤
DD
≤
(BR)DSS
, Tj
≤
JMAX
3.
Starting T j
= 25 °C, I
D
= 15A, V
DD
= 30V
D
2
PAK
TO-220
Value
TO-220FP
100
100
± 20
35
25
140
115
0.77
18
13
72
30
0.2
28
275
-2500
-55 to 175
Unit
A
A
W
V
A
V
V
W/°C
V/ns mJ
V
°C
Table 2.
Thermal data
Rthj-case Thermal resistance junction-case max
Rthj-amb Thermal resistance junction-ambient max
T
J
Maximum lead temperature for soldering purpose
D
2
PAK
TO-220
1.30
62.5
300
TO-220FP
5 °C/W
°C/W
°C
3/16
Electrical characteristics STB30NF10 - STP30NF10 - STP30NF10FP
(T
CASE
=25°C unless otherwise specified)
Table 3.
Symbol
On/off states
Parameter
V
(BR)DSS
Drain-source breakdown voltage
I
DSS
I
GSS
V
GS(th)
R
DS(on)
Zero gate voltage drain current (V
GS
= 0)
Gate-body leakage current (V
DS
= 0)
Gate threshold voltage
Static drain-source on resistance
Test conditions
I
D
= 250µA, V
GS
=0
V
DS
= max ratings
V
DS
= max ratings,
T
C
= 125°C
V
GS
= ± 20V
V
DS
= V
GS
, I
D
= 250µA
V
GS
= 10V, I
D
= 15A
Min.
100
2
Typ.
Max.
Unit
V
1
10
±100
3 4
0.038
0.045
µA
µA nA
V
Ω
Table 4.
Symbol
Dynamic
Parameter Test conditions g fs
C
C
C
(1) iss oss rss
Forward transconductance
Input capacitance
Output capacitance
Reverse transfer capacitance
V
V
V
DS
DS
GS
= 15V, I
= 25V, f = 1MHz,
= 0
D
= 15A t d(on) t r t d(off) t f
Turn-on delay time
Rise time
Turn-off delay time
Fall time
V
DD
R
G
= 50V, I
D
= 15A
= 4.7
Ω V
GS
= 10V
(see Figure 15 )
Q g
Q gs
Q gd
Total gate charge
Gate-source charge
Gate-drain charge
V
V
DD
GS
= 80V, I
= 10V
(see
1.
Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %.
D
= 12A,
Figure 16 )
Min.
Typ.
Max.
Unit
10 S
1180
180
80
15
40
45
10
40
8
15
55 pF pF pF ns ns ns ns nC nC nC
4/16
STB30NF10 - STP30NF10 - STP30NF10FP Electrical characteristics
Table 5.
Symbol
Source drain diode
Parameter Test conditions
I
I t
SD
I
SDM
V
SD
Q rr rr
(1)
(2)
RRM
Source-drain current
Source-drain current
(pulsed)
Forward on voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
I
SD
= 30A, V
GS
= 0
I
SD
= 30A, di/dt = 100A/µs,
V
DD
= 55V, T j
= 150°C
(see Figure 17 )
1.
Pulse width limited by safe operating area.
2.
Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %
Min.
Typ.
Max.
Unit
35
140
1.3
110
390
7.5
A
A
V ns nC
A
5/16
Electrical characteristics
Figure 1.
Safe operating area for TO-
220/D
2
PAK
STB30NF10 - STP30NF10 - STP30NF10FP
Figure 2.
Thermal impedance for TO-
220/D
2
PAK
Figure 3.
Safe operating area for TO-220FP Figure 4.
Thermal impedance for TO-220FP
Figure 5.
Output characterisics Figure 6.
Transfer characteristics
6/16
STB30NF10 - STP30NF10 - STP30NF10FP
Figure 7.
Transconductance
Electrical characteristics
Figure 8.
Static drain-source on resistance
Figure 9.
Gate charge vs gate-source voltage Figure 10. Capacitance variations
Figure 11. Normalized gate threshold voltage vs temperature
Figure 12. Normalized on resistance vs temperature
7/16
Electrical characteristics
Figure 13. Source-drain diode forward characteristics
STB30NF10 - STP30NF10 - STP30NF10FP
Figure 14. Normalized B
VDSS
vs temperature
8/16
STB30NF10 - STP30NF10 - STP30NF10FP
3 Test circuit
Figure 15. Switching times test circuit for resistive load
Figure 16. Gate charge test circuit
Test circuit
Figure 17. Test circuit for inductive load switching and diode recovery times
Figure 18. Unclamped Inductive load test circuit
Figure 19. Unclamped inductive waveform Figure 20. Switching time waveform
9/16
Package mechanical data
4 Package mechanical data
STB30NF10 - STP30NF10 - STP30NF10FP
In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
10/16
STB30NF10 - STP30NF10 - STP30NF10FP
DIM.
L
L2
L3
D1
E
E1
G
M
R
V2
A
A1
A2
B
B2
C
C2
D
4.88
15
1.27
1.4
2.4
MIN.
4.4
2.49
0.03
0.7
1.14
0.45
1.23
8.95
10
0º
D
2
PAK MECHANICAL DATA
TO-247 MECHANICAL DATA
mm.
TYP MAX.
4.6
2.69
0.23
0.93
1.7
0.6
1.36
9.35
MIN.
0.173
0.098
0.001
0.027
0.044
0.017
0.048
0.352
8
10.4
0.393
8.5
5.28
15.85
1.4
1.75
3.2
0.192
0.590
0.050
0.055
0.094
0.4
4º
Package mechanical data inch
TYP.
0.315
0.334
0.015
0.208
0.625
0.055
0.068
0.126
MAX.
0.181
0.106
0.009
0.036
0.067
0.023
0.053
0.368
1
11/16
Package mechanical data STB30NF10 - STP30NF10 - STP30NF10FP
DIM.
F
F1
F2
G
G1
H
A
B
D
E
L5
L6
L7
L2
L3
L4
Ø
0.75
1.15
1.15
4.95
2.4
10
MIN.
4.4
2.5
2.5
0.45
28.6
9.8
2.9
15.9
9
3
TO-220FP MECHANICAL DATA
mm.
TYP
16
1
1.7
1.7
5.2
2.7
10.4
MAX.
4.6
2.7
2.75
0.7
30.6
10.6
3.6
16.4
9.3
3.2
MIN.
0.173
0.098
0.098
0.017
0.030
0.045
0.045
0.195
0.094
0.393
1.126
.0385
0.114
0.626
0.354
0.118
inch
TYP.
0.630
MAX.
0.181
0.106
0.108
0.027
0.039
0.067
0.067
0.204
0.106
0.409
1.204
0.417
0.141
0.645
0.366
0.126
L6
L7
L3
L2
L5
L4
1 2 3
12/16
STB30NF10 - STP30NF10 - STP30NF10FP Package mechanical data
DIM.
F
H1
J1
E e e1
A b b1 c
D
L
L1
L20
L30
øP
Q
MIN.
4.40
0.61
1.15
0.49
15.25
10
2.40
4.95
1.23
6.20
2.40
13
3.50
3.75
2.65
TO-220 MECHANICAL DATA
mm.
TYP MAX.
4.60
0.88
1.70
0.70
15.75
10.40
2.70
5.15
1.32
6.60
2.72
14
3.93
MIN.
0.173
0.024
0.045
0.019
0.60
0.393
0.094
0.194
0.048
0.244
0.094
0.511
0.137
16.40
28.90
3.85
2.95
0.147
0.104
inch
TYP.
0.645
1.137
MAX.
0.181
0.034
0.066
0.027
0.620
0.409
0.106
0.202
0.052
0.256
0.107
0.551
0.154
0.151
0.116
13/16
Packaging mechanical data
5
STB30NF10 - STP30NF10 - STP30NF10FP
Packaging mechanical data
D
2
PAK FOOTPRINT
14/16
E
F
K0
P0
A0
B0
D
D1
P1
P2
R
T
W
TAPE MECHANICAL DATA
DIM.
mm inch
MIN.
MAX.
MIN.
MAX.
10.5
10.7
0.413 0.421
15.7
15.9
0.618 0.626
1.5
1.6
0.059 0.063
1.59
1.61
0.062 0.063
1.65
1.85
0.065 0.073
11.4
11.6
0.449 0.456
4.8
3.9
5.0
0.189 0.197
4.1
0.153 0.161
11.9
12.1
0.468 0.476
1.9
2.1
0.075 0.082
50 1.574
0.25
0.35 0.0098 0.0137
23.7
24.3
0.933 0.956
* on sales type
TAPE AND REEL SHIPMENT
G
N
T
A
B
C
D
REEL MECHANICAL DATA
DIM.
mm inch
MIN.
MAX.
MIN.
MAX.
330 12.992
1.5
0.059
12.8
13.2
0.504
0.520
20.2
0795
24.4
26.4
0.960
1.039
100 3.937
30.4
1.197
BASE QTY
1000
BULK QTY
1000
STB30NF10 - STP30NF10 - STP30NF10FP
Table 6.
Date
Revision history
Revision
21-Jun-2004
26-Jun-2006
1
2
Changes
First version
New template, no content change
Revision history
15/16
STB30NF10 - STP30NF10 - STP30NF10FP
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED,
AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS,
NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR
SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
16/16
