STGD7NC60HT4
Datasheet
N-channel 600 V, 14 A, very fast IGBT
G(1)
TAB
DPAK
1
2 3
C(2, TAB)
E(3)
Features
Order codes
STGD7NC60HT4
V
CES
600 V
• Low on-voltage drop (V
CE(sat)
)
• High-frequency operation up to 70 kHz
V
CE(sat)
max.
2.5 V
Applications
• Switching applications
I
C
(at T
C
= 100 °C)
14 A
G1C2TE3
Description
This device is a very fast IGBT developed using advanced PowerMESH™ technology. This process guarantees an excellent trade-off between switching performance and low on-state behavior. This device is well-suited for resonant or soft-switching applications.
Product status link
STGD7NC60HT4
Product summary
Order code STGD7NC60HT4
Marking
Package
Packing
GD7NC60H
DPAK
Tape and reel
DS11749 - Rev 3 - October 2018
For further information contact your local STMicroelectronics sales office.
www.st.com
STGD7NC60HT4
Electrical ratings
1
Electrical ratings
Table 1. Absolute maximum ratings
Symbol
V
I
CES
C
Parameter
Collector-emitter voltage (V
GE
= 0 V)
Continuous collector current at T
C
= 25 °C
Continuous collector current at T
C
= 100 °C
Pulsed collector current I
CM
(1)
V
GE
P
TOT
T
STG
T
J
Gate-emitter voltage
Total dissipation at T
C
= 25 °C
Storage temperature range
Operating junction temperature range
1. Pulse width limited by maximum junction temperature.
Symbol
R thJ-case
R thJ-amb
Table 2. Thermal data
Parameter
Thermal resistance junction-case
Thermal resistance junction-ambient
Value
600
25
14
50
±20
70
-55 to 150
Unit
V
A
A
A
V
W
°C
Value
1.78
100
Unit
°C/W
°C/W
DS11749 - Rev 3 page 2/19
2
STGD7NC60HT4
Electrical characteristics
Electrical characteristics
T
C
= 25 °C unless otherwise specified
Table 3. Static characteristics
Symbol Parameter Test conditions
V
(BR)CES
Collector-emitter breakdown voltage
V
GE
= 0 V, I
C
= 1 mA
V
V
I
CE(sat)
GE(th)
CES
I
GES
Collector-emitter saturation voltage
Gate threshold voltage
Collector cut-off current
Gate-emitter leakage current
V
GE
= 15 V, I
C
= 7 A
V
GE
T
J
= 15 V, I
= 125 °C
C
= 7 A,
V
CE
= V
GE
, I
C
= 250 µA
V
GE
= 0 V, V
CE
= 600 V
V
GE
= 0 V, V
CE
= 600 V,
T
C
=125 °C
(1)
V
CE
1. Defined by design, not subject to production test.
= 0 V, V
GE
= ±20 V
Min.
600
3.75
Symbol
C ies
C oes
C res
Q g
Q ge
Q gc
I
CL
Table 4. Dynamic characteristics
Parameter Test conditions
Input capacitance
Output capacitance
V
CE
= 25 V, f = 1 MHz, V
GE
= 0 V
Reverse transfer capacitance
Total gate charge
Gate-emitter charge
Gate-collector charge
Turn-off SOA minimum current
V
CE
(see
V
V
= 390 V, I
C
Figure 16. Gate charge test circuit
clamp
GE
= 7 A, V
GE
= 480 V, T
= 15 V j
= 15 V
= 150 °C, R
G
= 10 Ω,
)
Min.
50
Typ.
Max.
Unit
V
1.85
1.7
2.5
5.75
10
1
±100
V
V
µA mA nA
Typ.
720
81
17
35
7
16
Max.
-
-
-
-
-
-
-
Unit pF nC
A
DS11749 - Rev 3 page 3/19
DS11749 - Rev 3
STGD7NC60HT4
Electrical characteristics
Table 5. Switching characteristics (inductive load)
Symbol t t d(on) r(on) di/dt
E
E t di/dt
E
E t t t t t r r
( off d(off) t on off
E d(on)
(
E t f f r(on) off d(off) on off ts
(on)
(on) ts
)
(1)
(2)
)
(1)
(2)
Parameter
Turn-on delay time
Turn-on rise time
Turn-on current slope
Test conditions
Turn-off rise time
Turn-off delay time
Fall time
V
CC
= 390 V, I
C
= 7 A, V
GE
= 15 V,
R
G
= 10 Ω (see
Figure 14. Ic vs frequency
and
Figure 15. Test circuit for inductive load switching )
Turn-on switching energy
Turn-off switching energy
Total switching energy
Turn-on delay time
Turn-on rise time
Turn-on current slope
Turn-off rise time
Turn-off delay time
Fall time
V
CE
R
G
= 390 V, I
= 10 Ω, T
J
C
= 7 A, V
GE
= 15 V,
= 125 °C (see Figure 14. Ic vs frequency
and Figure 15. Test circuit for inductive load switching
)
Turn-on switching energy
Turn-off switching energy
Total switching energy
Min.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Typ.
18.5
8.5
1060
27
72
60
95
115
210
18.5
7
1000
56
116
105
140
215
355
Max.
125
150
275
1. Including the reverse recovery of the diode. The diode is the same as the co-packaged in STGP7NC60HD.
2. Including the tail of the collector current.
µJ ns
µJ ns ns ns ns
A/µs
µJ
µJ
Unit ns ns
A/µs ns ns ns
µJ
µJ page 4/19
STGD7NC60HT4
Electrical characteristics (curves)
2.1
Electrical characteristics (curves)
Figure 1. Output characteristics Figure 2. Transfer characteristics
Figure 3. Collector-emitter on voltage vs temperature Figure 4. Collector-emitter on voltage vs collector current
Figure 5. Normalized gate threshold vs temperature
Figure 6. Normalized breakdown voltage vs temperature
V
(BR)CES
(norm.)
DS11749 - Rev 3 page 5/19
Figure 7. Gate charge vs gate-emitter voltage
STGD7NC60HT4
Electrical characteristics (curves)
Figure 8. Capacitance variations
Cies
Cres
Coes
Figure 9. Total switching energy vs temperature Figure 10. Total switching energy vs gate resistance
Figure 11. Total switching energy vs collector current Figure 12. Thermal impedance
DS11749 - Rev 3 page 6/19
DS11749 - Rev 3
Figure 13. Turn-off SOA
STGD7NC60HT4
Electrical characteristics (curves)
Figure 14. Ic vs frequency f (kHz) page 7/19
STGD7NC60HT4
Test circuits
3
Test circuits
Figure 15. Test circuit for inductive load switching
G
C
A A
E
B
L=100 µH
B
G
C
E
D.U.T
+
-
R
G
3.3
µF
1000
µF
V
CC
AM01504v1
V
G
Figure 16. Gate charge test circuit k
Figure 17. Switching waveform
90%
10% k k k k k
AM01505v1
V
CE
90%
10%
I
C
Td(on)
Ton
Tr(Ion)
Tr(Voff)
Tcross
90%
10%
Td(off)
Toff
Tf
AM01506v1
DS11749 - Rev 3 page 8/19
4
STGD7NC60HT4
Package information
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK ® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com
. ECOPACK ® is an ST trademark.
DS11749 - Rev 3 page 9/19
4.1
STGD7NC60HT4
DPAK (TO-252) type A2 package information
DPAK (TO-252) type A2 package information
Figure 18. DPAK (TO-252) type A2 package outline
DS11749 - Rev 3
0068772_type-A2_rev25 page 10/19
DS11749 - Rev 3
Dim.
c2
D
D1
E
E1 e e1
A
A1
A2 b b4 c
L2
L4
R
V2
H
L
L1
STGD7NC60HT4
DPAK (TO-252) type A2 package information
Table 6. DPAK (TO-252) type A2 mechanical data mm
Typ.
9.35
1.00
2.60
0.65
0.60
4.95
6.40
5.10
2.159
4.445
0.64
5.20
0.45
0.48
6.00
Min.
2.20
0.90
0.03
5.10
5.20
2.286
4.572
2.80
0.80
0.20
0°
10.10
1.50
3.00
0.95
1.00
5.25
6.60
5.30
2.413
4.699
0.90
5.40
0.60
0.60
6.20
Max.
2.40
1.10
0.23
8° page 11/19
4.2
STGD7NC60HT4
DPAK (TO-252) type C2 package information
DPAK (TO-252) type C2 package information
Figure 19. DPAK (TO-252) type C2 package outline
DS11749 - Rev 3
0068772_C2_25 page 12/19
DS11749 - Rev 3
Dim.
L
L1
L2
L3
L4
L6
θ1
θ2
V2 c2
D
D1
E
E1 e
H
A
A1
A2 b b4 c
STGD7NC60HT4
DPAK (TO-252) type C2 package information
Table 7. DPAK (TO-252) type C2 mechanical data
0.72
5.13
0.47
0.47
6.00
Min.
2.20
0.90
0.00
5.10
6.50
5.20
2.186
9.80
1.40
mm
Typ.
2.30
1.01
5.33
6.10
6.60
2.286
10.10
1.50
2.90 REF
0.90
0.60
5°
5°
0°
0.51 BSC
0.80
1.80 BSC
7°
7°
1.00
9°
9°
8°
0.85
5.46
0.60
0.60
6.20
Max.
2.38
1.10
0.10
5.60
6.70
5.50
2.386
10.40
1.70
1.25
page 13/19
STGD7NC60HT4
DPAK (TO-252) type C2 package information
Figure 20. DPAK (TO-252) recommended footprint (dimensions are in mm)
FP_0068772_25
DS11749 - Rev 3 page 14/19
4.3
DPAK (TO-252) packing information
Figure 21. DPAK (TO-252) tape outline
T
Top cover tape
10 pitches cumulative tolerance on tape +/- 0.2 mm
P0 D P2
B1
K0
For machine ref. only including draft and radii concentric around B0
B0
A0 P1
User direction of feed
D1
STGD7NC60HT4
DPAK (TO-252) packing information
F
E
W
User direction of feed
R
Bending radius
AM08852v1
DS11749 - Rev 3 page 15/19
DS11749 - Rev 3
Dim.
D1
E
F
K0
P0
A0
B0
B1
D
P1
P2
R
T
W
A
D
B
Figure 22. DPAK (TO-252) reel outline
STGD7NC60HT4
DPAK (TO-252) packing information
T
40mm min. access hole at slot location
C
N
G measured at hub
Full radius
Tape slot in core for tape start
2.5mm min.width
AM06038v1
2.55
3.9
7.9
1.9
40
0.25
15.7
1.5
1.5
1.65
7.4
Table 8. DPAK (TO-252) tape and reel mechanical data
Tape Reel mm
Dim.
Min.
6.8
10.4
Max.
7
10.6
12.1
1.6
C
D
A
B
G
N
T
Min.
1.5
12.8
20.2
16.4
50 1.85
7.6
2.75
4.1
8.1
2.1
0.35
16.3
Base qty.
Bulk qty.
mm
Max.
330
13.2
18.4
22.4
2500
2500 page 16/19
STGD7NC60HT4
Revision history
Date
11-Jul-2016
15-Dec-2016
02-Oct-2018 3
Table 9. Document revision history
Revision
1
2
Changes
First release. Part number previously included in datasheet DocID10855.
Updated Features table on cover page. Minor text changes
Removed maturity status indication from cover page. The document status is production data.
Updated Section 4 Package information
.
Minor text changes.
DS11749 - Rev 3 page 17/19
STGD7NC60HT4
Contents
Contents
1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4 Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
4.1
DPAK (TO-252) type A2 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.2
DPAK (TO-252) type C2 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.3
DPAK (TO-252) packing information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
DS11749 - Rev 3 page 18/19
STGD7NC60HT4
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2018 STMicroelectronics – All rights reserved
DS11749 - Rev 3 page 19/19
