STGD10NC60HT4
Datasheet
N-channel 600 V, 10 A, very fast IGBT in DPAK package
G(1)
TAB
DPAK
1
2 3
C(2, TAB)
E(3)
G1C2TE3
Features
Type V
CES
V
CE(sat) max.
STGD10NC60HT4 600 V 2.5 V
• Low on-voltage drop (V
CE(sat)
)
• Low CRES / CIES ratio (no cross-conduction susceptibility)
I
C
@100°C
10 A
Applications
• High-frequency motor controls
• SMPS and PFC in both hard switch and resonant topologies
Description
This device is a very fast IGBT developed using advanced PowerMESH™ technology. This process guarantees an excellent trade-off between switching performance and low on-state behavior. This device is well-suited for resonant or soft-switching applications.
Product status link
STGD10NC60HT4
Product summary
Order code
Marking
Package
Packing
STGD10NC60HT4
GD10NC60H
DPAK
Tape and reel
DS12871 - Rev 1 - February 2019
For further information contact your local STMicroelectronics sales office.
www.st.com
STGD10NC60HT4
Electrical ratings
1
Electrical ratings
Table 1. Absolute maximum ratings
Symbol
V
CES
I
C
I
C
I
CL
(1)
V
GE
P
TOT
T
J
T stg
Parameter
Collector-emitter voltage (V
GE
= 0 V)
Continuous collector current at T
C
= 25 °C
Collector current (continuous) at T
C
= 100°C
Collector current (pulsed)
Gate-emitter voltage
Total power dissipation at T
C
= 25 °C
Operating junction temperature range
Storage temperature range
1. V clamp
= 480 V, T j
= 150°C, R
G
= 10 Ω, V
GE
= 15 V
Symbol
R thj-case
R thj-amb
Table 2. Thermal data
Parameter
Thermal resistance junction-case
Thermal resistance junction-ambient
Value
600
20
10
40
±20
60
-55 to 150
Unit
V
A
A
A
V
W
°C
Value
2.08
62.5
Unit
°C/W
°C/W
DS12871 - Rev 1 page 2/19
2
STGD10NC60HT4
Electrical characteristics
Electrical characteristics
T
CASE
= 25 °C unless otherwise specified
Symbol
V
(BR)CES
I
CES
I
GES
V
GE(th)
V
CE(sat)
Parameter
Collector-emitter breakdown voltage
Collector cut-off current
(V
GE
= 0 V)
Gate-emitter leakage current
Gate threshold voltage
Collector-emitter saturation voltage
Table 3. On/off states
Test conditions
I
C
= 1 mA, V
GE
= 0 V
V
CE
= 600 V
V
CE
= 600 V, T
C
= 125 °C (1)
V
GE
= ±20 V, V
CE
= 0 V
V
CE
= V
GE
, I
C
= 250 μA
V
GE
= 15 V, I
C
= 5 A
V
GE
= 15 V, I
C
= 5 A, T
C
= 125°C
1. Defined by design, not subject to production test.
Min.
600
3.75
Typ.
1.9
1.7
Max.
150
1
±100
5.75
2.5
Unit
V
µA mA nA
V
V
Symbol
C ies
C oes
C res
Q g
Q ge
Q gc
Parameter
Input capacitance
Output capacitance
Reverse transfer capacitance
Total gate charge
Gate-emitter charge
Gate-collector charge
Table 4. Dynamic
Test conditions
V
CE
= 25 V, f = 1 MHz,
V
GE
= 0 V
V
CE
= 390 V, I
D
= 5 A,
V
GE
= 0 to 15 V
(see
Figure 15. Gate charge test circuit
)
Min.
-
-
-
-
-
-
Typ.
365
43
8.3
22
4.5
7.5
Max.
-
-
-
-
-
-
Unit pF pF pF nC nC nC
Symbol t d(on) t r
(di/dt) on t d(on) t r
(di/dt) on
Turn-on delay time
Current rise time
Table 5. Switching on/off (inductive load)
Parameter
Turn-on delay time
Current rise time
Turn-on current slope
Turn-on current slope
Test conditions
V
CC
= 390 V, I
C
= 5A
R
G
= 10 Ω, V
GE
= 15 V
(see
Figure 14. Test circuit for inductive load switching
and
Figure 16. Switching waveform
)
V
CC
= 390 V, I
C
= 5 A
R
G
= 10 Ω, V
GE
= 15 V,
T j
= 125°C
(see
Figure 14. Test circuit for inductive load switching
and
Figure 16. Switching waveform
)
Min.
-
-
-
Typ.
14.2
5
1000
Max.
-
-
-
Unit ns ns
A/μs
-
14
5 -
ns ns
920 A/μs
DS12871 - Rev 1 page 3/19
DS12871 - Rev 1
STGD10NC60HT4
Electrical characteristics
Symbol t r(V off
) td
(off) t f t r(V off
) td
(off)
Parameter
Off voltage rise time
Turn-off delay time
Current fall time
Off voltage rise time
Turn-off delay time t f
Current fall time
Test conditions
V
CC
= 390 V, I
C
= 5 A,
R
GE
= 10 Ω, V
GE
= 15 V
(see
Figure 14. Test circuit for inductive load switching
and
Figure 16. Switching waveform
)
V
CC
= 390 V, I
C
= 5 A,
R
GE
= 10 Ω, V
GE
= 15 V,
T j
= 125°C
(see
Figure 14. Test circuit for inductive load switching
and
Figure 16. Switching waveform
)
Min.
-
-
-
-
-
Typ.
27
72
85
Max.
-
-
-
Unit ns ns ns
50
108 -
ns ns
139 ns
Symbol
E on
E off
(1)
E ts
E on
E off
(1)
E ts
Table 6. Switching energy (inductive load)
Parameter
Turn-on switching energy
Turn-off switching energy
Total switching energy
Turn-on switching energy
Turn-off switching energy
Total switching energy
Test conditions
V
CC
= 390 V, I
C
= 5 A
R
G
= 10 Ω, V
GE
= 15 V
(see
Figure 14. Test circuit for inductive load switching
)
V
CC
= 390 V, I
C
= 5 A
R
G
= 10 Ω, V
GE
= 15 V,
T j
= 125°C
(see
Figure 14. Test circuit for inductive load switching
)
1. Including the tail of the collector current.
Min.
-
-
-
-
-
Typ.
31.8
95
126.8
61.8
173
Max.
-
-
-
-
-
Unit
μJ
μJ
μJ
μJ
μJ
234.8
μJ page 4/19
STGD10NC60HT4
Electrical characteristics (curves)
2.1
Electrical characteristics (curves)
Figure 1. Output characteristics
Figure 2. Transfer characteristics
Figure 3. Collector-emitter on voltage vs temperature
V
CE(sat)
(V)
Figure 4. Gate charge vs gate-source voltage
Figure 5. Capacitance variations
Figure 6. Normalized gate threshold voltage vs temperature
DS12871 - Rev 1 page 5/19
STGD10NC60HT4
Electrical characteristics (curves)
Figure 7. Collector-emitter on voltage vs collector current Figure 8. Normalized breakdown voltage vs temperature norm.
Figure 9. Switching energy vs temperature Figure 10. Switching energy vs gate resistance
Figure 11. Switching energy vs collector current
Figure 12. Thermal Impedance
DS12871 - Rev 1 page 6/19
Figure 13. Turn-off SOA
STGD10NC60HT4
Electrical characteristics (curves)
DS12871 - Rev 1 page 7/19
STGD10NC60HT4
Test circuits
3
Test circuits
Figure 14. Test circuit for inductive load switching
G
C
A A
E
B
L=100 µH
B
G
C
E
D.U.T
+
-
R
G
3.3
µF
1000
µF
V
CC
AM01504v1
V
G
Figure 15. Gate charge test circuit k
Figure 16. Switching waveform
90%
10% k k k k k
AM01505v1
V
CE
90%
10%
I
C t d(on) t on t r(Ion) t r(Voff) t cross t d(off) t off t f
90%
10%
AM01506v1
DS12871 - Rev 1 page 8/19
4
STGD10NC60HT4
Package information
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK ® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com
. ECOPACK ® is an ST trademark.
DS12871 - Rev 1 page 9/19
4.1
STGD10NC60HT4
DPAK (TO-252) type A2 package information
DPAK (TO-252) type A2 package information
Figure 17. DPAK (TO-252) type A2 package outline
DS12871 - Rev 1
0068772_type-A2_rev26 page 10/19
DS12871 - Rev 1
Dim.
c2
D
D1
E
E1 e e1
A
A1
A2 b b4 c
L2
L4
R
V2
H
L
L1
STGD10NC60HT4
DPAK (TO-252) type A2 package information
Table 7. DPAK (TO-252) type A2 mechanical data mm
Typ.
9.35
1.00
2.60
0.65
0.60
4.95
6.40
5.10
2.159
4.445
0.64
5.20
0.45
0.48
6.00
Min.
2.20
0.90
0.03
5.10
5.20
2.286
4.572
2.80
0.80
0.20
0°
10.10
1.50
3.00
0.95
1.00
5.25
6.60
5.30
2.413
4.699
0.90
5.40
0.60
0.60
6.20
Max.
2.40
1.10
0.23
8° page 11/19
4.2
STGD10NC60HT4
DPAK (TO-252) type C2 package information
DPAK (TO-252) type C2 package information
Figure 18. DPAK (TO-252) type C2 package outline
DS12871 - Rev 1
0068772_type-C2_rev26 page 12/19
DS12871 - Rev 1
Dim.
L
L1
L2
L3
L4
L6
θ1
θ2
V2 c2
D
D1
E
E1 e
H
A
A1
A2 b b4 c
STGD10NC60HT4
DPAK (TO-252) type C2 package information
Table 8. DPAK (TO-252) type C2 mechanical data
0.72
5.13
0.47
0.47
6.00
Min.
2.20
0.90
0.00
5.10
6.50
5.20
2.186
9.80
1.40
mm
Typ.
2.30
1.01
5.33
6.10
6.60
2.286
10.10
1.50
2.90 REF
0.90
0.60
5°
5°
0°
0.51 BSC
0.80
1.80 BSC
7°
7°
1.00
9°
9°
8°
0.85
5.46
0.60
0.60
6.20
Max.
2.38
1.10
0.10
5.60
6.70
5.50
2.386
10.40
1.70
1.25
page 13/19
STGD10NC60HT4
DPAK (TO-252) type C2 package information
Figure 19. DPAK (TO-252) recommended footprint (dimensions are in mm)
DS12871 - Rev 1 page 14/19
4.3
DPAK (TO-252) packing information
Figure 20. DPAK (TO-252) tape outline
T
Top cover tape
10 pitches cumulative tolerance on tape +/- 0.2 mm
P0 D P2
B1
K0
For machine ref. only including draft and radii concentric around B0
B0
A0 P1
User direction of feed
D1
STGD10NC60HT4
DPAK (TO-252) packing information
F
E
W
User direction of feed
R
Bending radius
AM08852v1
DS12871 - Rev 1 page 15/19
DS12871 - Rev 1
A
D
B
Figure 21. DPAK (TO-252) reel outline
STGD10NC60HT4
DPAK (TO-252) packing information
T
40mm min. access hole at slot location
C
N
G measured at hub
Full radius
Tape slot in core for tape start
2.5mm min.width
Dim.
E
F
K0
P0
P1
P2
R
T
W
A0
B0
B1
D
D1
AM06038v1
1.5
1.5
1.65
7.4
2.55
3.9
7.9
1.9
40
0.25
15.7
Table 9. DPAK (TO-252) tape and reel mechanical data
Tape Reel mm
Dim.
Min.
6.8
10.4
Max.
7
10.6
12.1
1.6
N
T
D
G
A
B
C
Min.
1.5
12.8
20.2
16.4
50 1.85
7.6
2.75
4.1
8.1
2.1
0.35
16.3
Base qty.
Bulk qty.
mm
Max.
330
13.2
18.4
22.4
2500
2500 page 16/19
Revision history
Date
27-Feb-2019
Version
1
Table 10. Document revision history
Changes
Initial release.
STGD10NC60HT4
DS12871 - Rev 1 page 17/19
STGD10NC60HT4
Contents
Contents
1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4 Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
4.1
DPAK (TO-252) type A2 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.2
DPAK (TO-252) type C2 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.3
DPAK (TO-252) packing information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
DS12871 - Rev 1 page 18/19
STGD10NC60HT4
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2019 STMicroelectronics – All rights reserved
DS12871 - Rev 1 page 19/19
