HCF4013
Dual D-type flip-flop
Datasheet
-
production data
PDIP14 SO14
Applications
• Automotive
• Industrial
• Computer
• Consumer
Description
Features
• Set-reset capability
• Static flip-flop operation - retains state indefinitely with clock level either “high” or “low”
The HCF4013 is a monolithic integrated circuit fabricated in metal oxide semiconductor technology available in PDIP14 and SO14 packages.
• Medium speed operation 16 MHz (typ.), clock toggle rate at 10 V
• Standardized symmetrical output characteristics
The HCF4013 consists of two identical, independent data type flip-flops. Each flip-flop has independent data, set, reset, and clock inputs, and Q and Q outputs. This device can be used for shift register applications. It can also be used for counter and toggle applications by connecting Q output to the data input.
• Quiescent current specified up to 20 V
• 5 V, 10 V, and 15 V parametric ratings
• Input leakage current I
I
V
DD
= 18 V, T
A
= 25
°
= 100 nA (max.) at
C
• 100 % tested for quiescent current
• ESD performance
– HBM: 2 kV
– MM: 200 V
– CDM: 1 kV
The logic level present at the D input is transferred to the Q output during the positivegoing transition of the clock pulse. Setting or resetting is independent of the clock and is accomplished by a high level on the set or reset line, respectively.
Table 1. Device summary table
Order code Temperature range Package Packing Marking
HCF4013M013TR
HCF4013YM013TR (1)
HCF4013BEY
-55 ° C to +125 ° C
-40 ° C to +125 ° C
-55 ° C to +125 ° C
SO14
SO14 (automotive grade)
(1)
PDIP14
Tape and reel
HCF4013
HCF4013Y
HCF4013BE Tube
1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC
Q001 and Q002 or equivalent.
May 2013
This is information on a product in full production.
DocID2023 Rev 4 1/13 www.st.com
5
6
3
4
1
2
Contents
Contents
HCF4013
Pin information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Functional description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.1
PDIP14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.2
SO14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2/13 DocID2023 Rev 4
HCF4013 Pin information
Pin no
3, 11
4, 10
6, 8
5, 9
1, 13
2, 12
7
14
Figure 1. Pin connections (top view)
4
4
&/2&.
5(6(7
'
6(7
966
))
))
9''
4
4
&/2&.
5(6(7
'
6(7
*$06&%
Table 2. Pin description
Symbol Name and function
CLOCK1
CLOCK2
RESET1
RESET2
SET1, SET2
D1, D2
Q1, Q2
Q1, Q2
V
SS
V
DD
Clock inputs
Reset inputs
Set inputs
Data inputs
Data outputs
Data outputs
Negative supply voltage
Positive supply voltage
DocID2023 Rev 4 3/13
13
Functional description HCF4013
Figure 2. Logic diagram
5(6(7
&/
0DVWHUVHFWLRQ
'$7$
7*
&/
&/
7*
&/
6(7
&/ &/
&/
&/
&/
3LQ 9''
3LQ 966
6ODYHVHFWLRQ
&/
7*
&/
4
%XIIHUHGRXWSXWV
4
*$06&%
1. All inputs are protected by a COS/MOS protection network.
CLOCK
(1)
X
(2)
X
(2)
X
(2)
1. Low level
2. Don’t care
D
L
H
X
(2)
X
(2)
X
(2)
X
(2)
Table 3. Truth table
RESET SET
L
H
L
H
L
L
L
L
H
H
L
L
Q
Q
L
H
H
L
H
Figure 3. Input equivalent circuit
9''
Q
Q
H
L
H
H
L
,1387
4/13
966
*$06&%
DocID2023 Rev 4
HCF4013 Electrical characteristics
Absolute maximum ratings are those values beyond which damage to the device may occur.
Functional operation under these conditions is not implied. All voltage values are referred to
V
SS
pin voltage.
Symbol
V
DD
V
I
I
I
P
D
T op
T stg
Table 4. Absolute maximum ratings (AMR)
Parameter Value
Supply voltage
DC input voltage
DC input current
Power dissipation per package
Power dissipation per output transistor
Operating temperature
Storage temperature
-0.5 to +22
-0.5 to V
DD
+ 0.5
± 10
200
100
-55 to +125
-65 to +150
Unit
V mA mW
°C
Symbol
V
DD
V
I
T op
Table 5. Recommended operating conditions
Parameter Value
Supply voltage
Input voltage
Operating temperature
3 to 20
0 to V
DD
-55 to 125
Unit
V
°C
DocID2023 Rev 4 5/13
13
Electrical characteristics HCF4013
Table 6. DC specifications (1)
Test condition Value
Sym. Parameter
V
I
(V) V
O
(V) |I
O
| ( μ A) V
DD
(V)
T
A
= 25 °C -40 to 85 °C -55 to 125°C
Min.
Typ. Max. Min.
Max.
Min.
Max.
Unit
V
V
I
V
I
I
V
L
OH
OL
IH
IL
OH
OL
Quiescent current
High level output voltage
Low level output voltage
High level input voltage
Low level input voltage
Output drive current
Output sink current
0/5
0/10
0/15
0/20
0/5
0/10
0/15
5/0
10/0
15/0
0/5
0/5
0/10
0/15
0/5
0/10
0/15
0.5/4.5
1/9
1.5/13.5
4.5/0.5
9/1
13.5/1.5
2.5
4.6
9.5
13.5
0.4
0.5
1.5
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
<1
10
15
5
5
10
15
5
10
15
10
15
5
10
15
5
5
10
15
20
5
10
4.95
9.95
15 14.95
5
3.5
7
11
-1.36
-3.2
-0.44
-1
-1.1
-2.6
-3.0
-6.8
0.44
1
1.1
2.6
3.0
6.8
0.02
1
0.02
2
0.02
4
0.04
20
0.05
0.05
0.05
1.5
3
4
4.95
9.95
14.95
3.5
7
11
-1.15
-0.36
-0.9
-2.4
0.36
0.9
2.4
30
60
120
600
0.05
0.05
0.05
1.5
3
4
4.95
9.95
14.95
3.5
7
11
-1.1
-0.36
-0.9
-2.4
0.36
0.9
2.4
0.05
0.05
0.05
1.5
3
4
I
C
I
I
Input leakage current
Input capacitance
0/18 Any input
Any input
18 ± 10
5
-5 ± 0.1
7.5
± 1 ± 1
1. The noise margin for both level "1" and "0" is: 1 V min. with V
V
DD
= 15 V.
DD
= 5 V, 2 V min. with V
DD
= 10 V, and 2.5 V min. with
30
60
120
600
μ A
V mA
μ A pF
6/13 DocID2023 Rev 4
HCF4013 Electrical characteristics
Symbol t
TLH
, t
THL
(T amb
Table 7. Dynamic electrical characteristics
= 25 °C, C
L
= 50 pF, R
L
= 200 k Ω , t r
= t f
= 20 ns)
Test condition Value
(1)
Parameter
V
DD
(V) Min.
Typ.
Max.
5 150 300
Propagation delay time
(CLOCK to Q or Q outputs)
10
15
65
45
130
90
Unit t t t
PLH
PHL
THL
, t
TLH
Propagation delay time
(SET to Q or RESET to Q)
Propagation delay time
(SET to Q or RESET to Q)
Transition time
5
10
15
5
10
15
5
10
150
65
45
200
85
60
100
50
170
120
200
100
80
300
130
90
400 ns f
CL
(2) t
W
Maximum clock input frequency
Clock pulse width
15
5
10
15
5
15
5
10
3.5
8
12
140
60
40
180
40
7
16
24
70
30
20
90
MHz ns t r
, t f
(3)
Set or reset pulse width
Clock input rise or fall time
10
15
5
10
80
50
40
25
15
4 μ s t s
Data setup time
15
5
10
15
40
20
15
20
10
7
1 ns
1. The typical temperature coefficient for all V
DD
values is 0.3 %/°C.
2. Input tr, tf = 5 ns
3. If more than one unit is cascaded in a parallel clocked application, tr should be made less than or equal to the sum of the fixed propagation delay time at 15 pF and the transition time of the carry output driving stage for the estimated capacitive load.
DocID2023 Rev 4 7/13
13
Electrical characteristics HCF4013
3XOVHJHQHUDWRU
Figure 4. Test circuit
9
''
5
7
'87
9
66
&
/ 5
/
QV
*$06&%
1. Legend: C
L
= 50 pF or equivalent (includes jig and probe capacitance), R
L
= 200 K Ω, R
T generator (typically 50 Ω )
= Z
OUT
of pulse
Figure 5. Dn to Qn timings (50 % clock duty cycle)
QV
9
&&
'Q
*1'
W
V
W
K
W
Z
W
Z
9
&&
&/2&.
*1'
I
PD[
W
3/+
W
3+/
9
2+
4Q4Q
9
2/
*$06&%
8/13 DocID2023 Rev 4
HCF4013
6(7
5(6(7
4Q
4Q
Electrical characteristics
Figure 6. Set and reset timings
QV QV
9
&&
W
3/+
W
3+/
W
Z
W
7+/
W
3+/
W
3/+
W
Z
9
2/
9
2+
9
2/
W
7/+
*$06&%
*1'
9
&&
*1'
9
2+
DocID2023 Rev 4 9/13
13
Package information HCF4013
4.1
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK ® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com
.
ECOPACK ® is an ST trademark.
PDIP14 package information
Figure 7. PDIP14 package mechanical drawing
=
E
'
H
% H
=
D
,
/
(
E
10/13
Ref
E e b1
D a1
B b
I
L e3
F
Z
)
*$06&%
Min.
0.51
1.39
1.27
Table 8. PDIP14 package mechanical data
Dimensions
Millimeters Inches
Typ.
Max.
1.65
Min.
0.020
0.055
Typ.
0.5
0.25
0.020
0.010
20
8.5
2.54
15.24
0.335
0.100
0.600
7.1
5.1
3.3
0.130
2.54
0.050
DocID2023 Rev 4
Max.
0.065
0.787
0.280
0.201
0.100
HCF4013
4.2
Package information
SO14 package information
E
Figure 8. SO14 package mechanical drawing
/
*
&
F
D $
H
H
6
(
D E
'
0
Ref
L
M
F
G
S e e3
D
E b b1
C c1
A a1 a2
)
*$06&%
Min.
0.1
0.35
0.19
8.55
5.8
3.8
4.6
0.5
Table 9. SO14 package mechanical data
Dimensions
Millimeters Inches
Typ.
Max.
1.75
0.2
1.65
0.46
0.25
Min.
0.003
0.013
0.007
Typ.
0.5
45 °
0.019
45 °
8.75
6.2
0.336
0.228
1.27
7.62
0.050
0.300
4.0
5.3
1.27
0.68
8 °
0.149
0.181
0.019
0.344
0.244
0.157
0.208
0.050
0.026
8 °
Max.
0.068
0.007
0.064
0.018
0.010
DocID2023 Rev 4 11/13
13
Ordering information HCF4013
Order code
Table 10. Order codes
Temperature range Package Packing Marking
HCF4013M013TR
HCF4013YM013TR(1)
-55 ° C to +125 ° C
-40 ° C to +125 ° C
SO14
SO14
(automotive grade)
(1)
PDIP14
Tape and reel
HCF4013
HCF4013Y
HCF4013BEY -55 ° C to +125 ° C Tube HCF4013BE
1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 and Q002 or equivalent.
Date
Sep-2001
18-Feb-2013
30-Apr-2013
30-May-2013
Revision
Table 11. Document revision history
Changes
1
2
3
4
Initial release.
Document template and layout updated
Removed “B” from part number
Added ESD information to
Features
Updated package names (PDIP-14 and SO-14 instead of DIP-14 and SOP-14).
Added
Applications
Added
Device summary table
Updated symbol names in
Table 7
Added
Section 5: Ordering information
Features
: updated ESD information
Features
: updated ESD information
Updated footnote in Table 1
and Table 10
12/13 DocID2023 Rev 4
HCF4013
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT AUTHORIZED FOR USE IN WEAPONS. NOR ARE ST PRODUCTS DESIGNED OR AUTHORIZED FOR USE
IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH
PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR
ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED
FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN
WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE,
AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS.
PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE
CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2013 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
DocID2023 Rev 4 13/13
13
